From f14c4f141ad88290bb23d597a0a47833e7891fcd Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Tue, 27 Jul 2010 08:14:35 +0000
Subject: [PATCH 001/728] ARM: mach-shmobile: Runtime PM V3

This is the SH-Mobile ARM Runtime PM implementation V3.
Only clocks are managed at this point. If Runtime PM
is disabled then the clocks will be enabled before
->probe() and disabled after ->remove().

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/Makefile       |   2 +-
 arch/arm/mach-shmobile/clock-sh7372.c |   2 +-
 arch/arm/mach-shmobile/pm_runtime.c   | 169 ++++++++++++++++++++++++++
 3 files changed, 171 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-shmobile/pm_runtime.c

diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 5e16b4c69222..ae416fe7daf2 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common objects
-obj-y				:= timer.o console.o clock.o
+obj-y				:= timer.o console.o clock.o pm_runtime.o
 
 # CPU objects
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index fb4e9b1d788e..4a1d019f7bad 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -428,7 +428,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
 	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, CLK_ENABLE_ON_INIT), /* FSIA */
+	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSIA */
 	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
 	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c
new file mode 100644
index 000000000000..94912d3944d3
--- /dev/null
+++ b/arch/arm/mach-shmobile/pm_runtime.c
@@ -0,0 +1,169 @@
+/*
+ * arch/arm/mach-shmobile/pm_runtime.c
+ *
+ * Runtime PM support code for SuperH Mobile ARM
+ *
+ *  Copyright (C) 2009-2010 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/sh_clk.h>
+#include <linux/bitmap.h>
+
+#ifdef CONFIG_PM_RUNTIME
+#define BIT_ONCE 0
+#define BIT_ACTIVE 1
+#define BIT_CLK_ENABLED 2
+
+struct pm_runtime_data {
+	unsigned long flags;
+	struct clk *clk;
+};
+
+static void __devres_release(struct device *dev, void *res)
+{
+	struct pm_runtime_data *prd = res;
+
+	dev_dbg(dev, "__devres_release()\n");
+
+	if (test_bit(BIT_CLK_ENABLED, &prd->flags))
+		clk_disable(prd->clk);
+
+	if (test_bit(BIT_ACTIVE, &prd->flags))
+		clk_put(prd->clk);
+}
+
+static struct pm_runtime_data *__to_prd(struct device *dev)
+{
+	return devres_find(dev, __devres_release, NULL, NULL);
+}
+
+static void platform_pm_runtime_init(struct device *dev,
+				     struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags)) {
+		prd->clk = clk_get(dev, NULL);
+		if (!IS_ERR(prd->clk)) {
+			set_bit(BIT_ACTIVE, &prd->flags);
+			dev_info(dev, "clocks managed by runtime pm\n");
+		}
+	}
+}
+
+static void platform_pm_runtime_bug(struct device *dev,
+				    struct pm_runtime_data *prd)
+{
+	if (prd && !test_and_set_bit(BIT_ONCE, &prd->flags))
+		dev_err(dev, "runtime pm suspend before resume\n");
+}
+
+int platform_pm_runtime_suspend(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_suspend()\n");
+
+	platform_pm_runtime_bug(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_disable(prd->clk);
+		clear_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_resume(struct device *dev)
+{
+	struct pm_runtime_data *prd = __to_prd(dev);
+
+	dev_dbg(dev, "platform_pm_runtime_resume()\n");
+
+	platform_pm_runtime_init(dev, prd);
+
+	if (prd && test_bit(BIT_ACTIVE, &prd->flags)) {
+		clk_enable(prd->clk);
+		set_bit(BIT_CLK_ENABLED, &prd->flags);
+	}
+
+	return 0;
+}
+
+int platform_pm_runtime_idle(struct device *dev)
+{
+	/* suspend synchronously to disable clocks immediately */
+	return pm_runtime_suspend(dev);
+}
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct pm_runtime_data *prd;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	if (action == BUS_NOTIFY_BIND_DRIVER) {
+		prd = devres_alloc(__devres_release, sizeof(*prd), GFP_KERNEL);
+		if (prd)
+			devres_add(dev, prd);
+		else
+			dev_err(dev, "unable to alloc memory for runtime pm\n");
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_PM_RUNTIME */
+
+static int platform_bus_notify(struct notifier_block *nb,
+			       unsigned long action, void *data)
+{
+	struct device *dev = data;
+	struct clk *clk;
+
+	dev_dbg(dev, "platform_bus_notify() %ld !\n", action);
+
+	switch (action) {
+	case BUS_NOTIFY_BIND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_enable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced on\n");
+		}
+		break;
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		clk = clk_get(dev, NULL);
+		if (!IS_ERR(clk)) {
+			clk_disable(clk);
+			clk_put(clk);
+			dev_info(dev, "runtime pm disabled, clock forced off\n");
+		}
+		break;
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_PM_RUNTIME */
+
+static struct notifier_block platform_bus_notifier = {
+	.notifier_call = platform_bus_notify
+};
+
+static int __init sh_pm_runtime_init(void)
+{
+	bus_register_notifier(&platform_bus_type, &platform_bus_notifier);
+	return 0;
+}
+core_initcall(sh_pm_runtime_init);

From a4909b52682c1e2ac858754c8bc46f2501e67dee Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon, 26 Jul 2010 16:20:53 +0000
Subject: [PATCH 002/728] ARM: mach-shmobile: add clock definitions for CEU and
 CSI2

Two more clocks to be managed by the runtime PM.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 4a1d019f7bad..dcaac1b6691d 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -395,7 +395,7 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 
 enum { MSTP001,
        MSTP131, MSTP130,
-       MSTP129, MSTP128,
+       MSTP129, MSTP128, MSTP127, MSTP126,
        MSTP118, MSTP117, MSTP116,
        MSTP106, MSTP101, MSTP100,
        MSTP223,
@@ -413,6 +413,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
 	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
 	[MSTP128] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 28, 0), /* VEU0 */
+	[MSTP127] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 27, 0), /* CEU */
+	[MSTP126] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 26, 0), /* CSI2 */
 	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */
 	[MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
 	[MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
@@ -498,6 +500,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.1", &mstp_clks[MSTP128]), /* VEU0 */
+	CLKDEV_DEV_ID("sh_mobile_ceu.0", &mstp_clks[MSTP127]), /* CEU */
+	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
 	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */

From 2863e935a59b36d55522af8620112c64a56b4022 Mon Sep 17 00:00:00 2001
From: Arnd Hannemann <arnd@arndnet.de>
Date: Sat, 14 Aug 2010 19:45:21 +0000
Subject: [PATCH 003/728] ARM: mach-shmobile: AP4EVB: use gpio-leds for leds.

This allows control of the leds on the AP4EVB board by kernel events (triggers)
like mmc0/mmc1. In userland, the leds won't be available anymore over
/sys/class/gpio but via /sys/class/leds.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 52 +++++++++++++++++++--------
 1 file changed, 38 insertions(+), 14 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 23d472f9525e..98c1cf76c2b4 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -39,6 +39,7 @@
 #include <linux/sh_clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/usb/r8a66597.h>
 
@@ -650,7 +651,44 @@ static struct platform_device hdmi_device = {
 	},
 };
 
+static struct gpio_led ap4evb_leds[] = {
+	{
+		.name			= "led4",
+		.gpio			= GPIO_PORT185,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led2",
+		.gpio			= GPIO_PORT186,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led3",
+		.gpio			= GPIO_PORT187,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name			= "led1",
+		.gpio			= GPIO_PORT188,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data ap4evb_leds_pdata = {
+	.num_leds = ARRAY_SIZE(ap4evb_leds),
+	.leds = &ap4evb_leds,
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &ap4evb_leds_pdata,
+	},
+};
+
 static struct platform_device *ap4evb_devices[] __initdata = {
+	&leds_device,
 	&nor_flash_device,
 	&smc911x_device,
 	&sdhi0_device,
@@ -840,20 +878,6 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_CS5A,	NULL);
 	gpio_request(GPIO_FN_IRQ6_39,	NULL);
 
-	/* enable LED 1 - 4 */
-	gpio_request(GPIO_PORT185, NULL);
-	gpio_request(GPIO_PORT186, NULL);
-	gpio_request(GPIO_PORT187, NULL);
-	gpio_request(GPIO_PORT188, NULL);
-	gpio_direction_output(GPIO_PORT185, 1);
-	gpio_direction_output(GPIO_PORT186, 1);
-	gpio_direction_output(GPIO_PORT187, 1);
-	gpio_direction_output(GPIO_PORT188, 1);
-	gpio_export(GPIO_PORT185, 0);
-	gpio_export(GPIO_PORT186, 0);
-	gpio_export(GPIO_PORT187, 0);
-	gpio_export(GPIO_PORT188, 0);
-
 	/* enable Debug switch (S6) */
 	gpio_request(GPIO_PORT32, NULL);
 	gpio_request(GPIO_PORT33, NULL);

From 8050fbf268c3bc09752ceece40aff5d3f4e3e182 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Mon, 16 Aug 2010 14:54:35 +0900
Subject: [PATCH 004/728] ARM: mach-shmobile: Fix up gpio-leds pdata
 definition.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 98c1cf76c2b4..8afdb1dab029 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -676,7 +676,7 @@ static struct gpio_led ap4evb_leds[] = {
 
 static struct gpio_led_platform_data ap4evb_leds_pdata = {
 	.num_leds = ARRAY_SIZE(ap4evb_leds),
-	.leds = &ap4evb_leds,
+	.leds = ap4evb_leds,
 };
 
 static struct platform_device leds_device = {

From ec53fe3d655befce6420a1b8485af9b1145a0c90 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Fri, 30 Jul 2010 22:58:40 +0200
Subject: [PATCH 005/728] eukrea-baseboards: fix the merge in one file
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Last change I did made a big mess in function names and CONFIG names,
this patch fixes this so that the baseboard support is really built
when selected.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c      | 2 +-
 arch/arm/mach-mx25/mach-cpuimx25.c                 | 4 ++--
 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c       | 2 +-
 arch/arm/mach-mx3/mach-cpuimx35.c                  | 4 ++--
 arch/arm/plat-mxc/include/mach/eukrea-baseboards.h | 4 ++--
 5 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
index 91931dcb0689..4aaadc753d3e 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
@@ -215,7 +215,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd25_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
index 56b2e26d23b4..b5efee23008f 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-mx25/mach-cpuimx25.c
@@ -147,8 +147,8 @@ static void __init eukrea_cpuimx25_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
+	eukrea_mbimxsd25_baseboard_init();
 #endif
 }
 
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 1dc5004df866..f8f15e3ac7a0 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -216,7 +216,7 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata = {
  * Add platform devices present on this baseboard and init
  * them from CPU side as far as required to use them later on
  */
-void __init eukrea_mbimxsd_baseboard_init(void)
+void __init eukrea_mbimxsd35_baseboard_init(void)
 {
 	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
 			ARRAY_SIZE(eukrea_mbimxsd_pads)))
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 63f970f340a2..e4268bbb8fbc 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -201,8 +201,8 @@ static void __init mxc_board_init(void)
 	if (!otg_mode_host)
 		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
 
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD_BASEBOARD
-	eukrea_mbimxsd_baseboard_init();
+#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
+	eukrea_mbimxsd35_baseboard_init();
 #endif
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
index 634e3f4c454d..656acb45d434 100644
--- a/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
+++ b/arch/arm/plat-mxc/include/mach/eukrea-baseboards.h
@@ -37,9 +37,9 @@
  * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
  */
 
-extern void eukrea_mbimx25_baseboard_init(void);
+extern void eukrea_mbimxsd25_baseboard_init(void);
 extern void eukrea_mbimx27_baseboard_init(void);
-extern void eukrea_mbimx35_baseboard_init(void);
+extern void eukrea_mbimxsd35_baseboard_init(void);
 extern void eukrea_mbimx51_baseboard_init(void);
 
 #endif

From 3d6e614952e3e4cf9e70e58893a740ffec220b24 Mon Sep 17 00:00:00 2001
From: "Hans J. Koch" <hjk@linutronix.de>
Date: Thu, 12 Aug 2010 15:10:53 +0200
Subject: [PATCH 006/728] mx35: Fix boot ROM hang in internal boot mode
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

If a watchdog reset occurs after booting in internal boot mode, the i.MX35
won't boot anymore. The boot ROM code seems to assume that some clocks are
turned on (they are after a power-on reset). This patch turns on the
necessary clocks.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: John Ogness <jogness@linutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index d3af0fdf8475..32adf8d5b1f8 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -485,10 +485,10 @@ static struct clk_lookup lookups[] = {
 
 int __init mx35_clocks_init()
 {
-	unsigned int ll = 0;
+	unsigned int cgr2 = 3 << 26, cgr3 = 0;
 
 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	ll = (3 << 16);
+	cgr2 |= 3 << 16;
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
@@ -499,8 +499,20 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 18), CCM_BASE + CCM_CGR0);
 	__raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
 			CCM_BASE + CCM_CGR1);
-	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
-	__raw_writel(0, CCM_BASE + CCM_CGR3);
+
+	/*
+	 * Check if we came up in internal boot mode. If yes, we need some
+	 * extra clocks turned on, otherwise the MX35 boot ROM code will
+	 * hang after a watchdog reset.
+	 */
+	if (!(__raw_readl(CCM_BASE + CCM_RCSR) & (3 << 10))) {
+		/* Additionally turn on UART1, SCC, and IIM clocks */
+		cgr2 |= 3 << 16 | 3 << 4;
+		cgr3 |= 3 << 2;
+	}
+
+	__raw_writel(cgr2, CCM_BASE + CCM_CGR2);
+	__raw_writel(cgr3, CCM_BASE + CCM_CGR3);
 
 	mxc_timer_init(&gpt_clk,
 			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);

From 9a6f17fd1cd84811962735ff47111f84a8f05073 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 22 Apr 2010 12:37:13 +0200
Subject: [PATCH 007/728] i.MX35: remove get_3_3_div helper function

In the v2 reference manual there are no dividers combined of two
dividers. Instead, all dividers are simple 6bit dividers. I assume
the combined dividers only exist in preliminary hardware.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 32adf8d5b1f8..d3a8d3f32160 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -176,16 +176,11 @@ static unsigned long get_rate_ipg(struct clk *clk)
 	return get_rate_ahb(NULL) >> 1;
 }
 
-static unsigned long get_3_3_div(unsigned long in)
-{
-	return (((in >> 3) & 0x7) + 1) * ((in & 0x7) + 1);
-}
-
 static unsigned long get_rate_uart(struct clk *clk)
 {
 	unsigned long pdr3 = __raw_readl(CCM_BASE + CCM_PDR3);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div = get_3_3_div(pdr4 >> 10);
+	unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
 
 	if (pdr3 & (1 << 14))
 		return get_rate_arm() / div;
@@ -216,7 +211,7 @@ static unsigned long get_rate_sdhc(struct clk *clk)
 		break;
 	}
 
-	return rate / get_3_3_div(div);
+	return rate / (div + 1);
 }
 
 static unsigned long get_rate_mshc(struct clk *clk)
@@ -270,7 +265,7 @@ static unsigned long get_rate_csi(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
+	return rate / (((pdr2 >> 16) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_otg(struct clk *clk)
@@ -283,22 +278,21 @@ static unsigned long get_rate_otg(struct clk *clk)
 	else
 		rate = get_rate_ppll();
 
-	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+	return rate / (((pdr4 >> 22) & 0x3f) + 1);
 }
 
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
-	unsigned long div1, div2;
+	unsigned long div;
 
 	if (pdr0 & (1 << 26)) {
-		div1 = (pdr4 >> 19) & 0x7;
-		div2 = (pdr4 >> 16) & 0x7;
-		return get_rate_arm() / ((div1 + 1) * (div2 + 1));
+		div = (pdr4 >> 16) & 0x3f;
+		return get_rate_arm() / (div + 1);
 	} else {
-		div1 = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / div1;
+		div = (pdr0 >> 12) & 0x7;
+		return get_rate_ahb(NULL) / div;
 	}
 }
 

From c96c1e394fa72bd995154af7143873945a3fa89d Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 16 Aug 2010 15:54:05 +0200
Subject: [PATCH 008/728] clock-imx35: fix divider if ahb is source for ipg_per

According to the Datasheet:
"i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual,
Rev. 2" "Table 14-6. PDR0 Field Descriptions" the divider is
CCM_PER_AHB[3:0] + 1.

This patch adds the missing + 1.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index d3a8d3f32160..e582ceb6e0c1 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -292,7 +292,7 @@ static unsigned long get_rate_ipg_per(struct clk *clk)
 		return get_rate_arm() / (div + 1);
 	} else {
 		div = (pdr0 >> 12) & 0x7;
-		return get_rate_ahb(NULL) / div;
+		return get_rate_ahb(NULL) / (div + 1);
 	}
 }
 

From c56702de106b4fde301282f7ea60412276481442 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Mon, 16 Aug 2010 15:54:06 +0200
Subject: [PATCH 009/728] clock-imx35: correct arm and ahb clock calculation

According to the Datasheet:
"i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual,
Rev. 2" "Figure 14-24. Clock Control And Gating"
change the result of get_rate_ahb based on the frequency returned
by get_rate_arm to calculate the proper rate.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index e582ceb6e0c1..1d311b77b40e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -155,7 +155,7 @@ static unsigned long get_rate_arm(void)
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 	if (aad->sel)
-		fref = fref * 2 / 3;
+		fref = fref * 3 / 4;
 
 	return fref / aad->arm;
 }
@@ -164,7 +164,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
 	struct arm_ahb_div *aad;
-	unsigned long fref = get_rate_mpll();
+	unsigned long fref = get_rate_arm();
 
 	aad = &clk_consumer[(pdr0 >> 16) & 0xf];
 

From c735c40587cea45f9d2f83339f374595073c1923 Mon Sep 17 00:00:00 2001
From: Juergen Beisert <jbe@pengutronix.de>
Date: Mon, 16 Aug 2010 15:54:07 +0200
Subject: [PATCH 010/728] clock-imx35: Calculate the base clock rate for the
 IPU unit

The mx3fb driver needs the clock the IPU runs in order to calculate
the divider for the LCD clock. This patch adds the clock rate calculation
routine for the i.MX35 CPU.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 1d311b77b40e..7a62e744a8b0 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -296,6 +296,33 @@ static unsigned long get_rate_ipg_per(struct clk *clk)
 	}
 }
 
+static unsigned long get_rate_hsp(struct clk *clk)
+{
+	unsigned long hsp_podf = (__raw_readl(CCM_BASE + CCM_PDR0) >> 20) & 0x03;
+	unsigned long fref = get_rate_mpll();
+
+	if (fref > 400 * 1000 * 1000) {
+		switch (hsp_podf) {
+		case 0:
+			return fref >> 2;
+		case 1:
+			return fref >> 3;
+		case 2:
+			return fref / 3;
+		}
+	} else {
+		switch (hsp_podf) {
+		case 0:
+		case 2:
+			return fref / 3;
+		case 1:
+			return fref / 6;
+		}
+	}
+
+	return 0;
+}
+
 static int clk_cgr_enable(struct clk *clk)
 {
 	u32 reg;
@@ -353,7 +380,7 @@ DEFINE_CLOCK(i2c1_clk,   0, CCM_CGR1, 10, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c2_clk,   1, CCM_CGR1, 12, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(i2c3_clk,   2, CCM_CGR1, 14, get_rate_ipg_per, NULL);
 DEFINE_CLOCK(iomuxc_clk, 0, CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_ahb, NULL);
+DEFINE_CLOCK(ipu_clk,    0, CCM_CGR1, 18, get_rate_hsp, NULL);
 DEFINE_CLOCK(kpp_clk,    0, CCM_CGR1, 20, get_rate_ipg, NULL);
 DEFINE_CLOCK(mlb_clk,    0, CCM_CGR1, 22, get_rate_ahb, NULL);
 DEFINE_CLOCK(mshc_clk,   0, CCM_CGR1, 24, get_rate_mshc, NULL);

From 3572b33efb044f76c224197408a812cda7d54fe4 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@opensource.se>
Date: Mon, 16 Aug 2010 10:40:49 +0000
Subject: [PATCH 011/728] ARM: mach-shmobile: Clock framework comment fix

Update clock framework header comment for SH-Mobile ARM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c
index b7c705a213a2..6b7c7c42bc8f 100644
--- a/arch/arm/mach-shmobile/clock.c
+++ b/arch/arm/mach-shmobile/clock.c
@@ -1,8 +1,10 @@
 /*
- * SH-Mobile Timer
+ * SH-Mobile Clock Framework
  *
  * Copyright (C) 2010  Magnus Damm
  *
+ * Used together with arch/arm/common/clkdev.c and drivers/sh/clk.c.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.

From 4e1774f3a5de0885be2e59a8e8ef0e99c5f79e7a Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Tue, 17 Aug 2010 22:53:58 +0000
Subject: [PATCH 012/728] ARM: mach-shmobile: do not enable the PLLC2 clock on
 init

AP4EVB has to reparent PLLC2 to provide a precise HDMI clock, this is only
possible, if PLLC2 hasn't been enabled yet. Since no other driver currently
uses PLLC2 we can safely remove the CLK_ENABLE_ON_INIT flag. This fixes
the "Cannot set PLLC2 parent: -16, 1 users" error message, when trying to
use HDMI on AP4EVB.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/clock-sh7372.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index dcaac1b6691d..759468992ad2 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -286,7 +286,6 @@ static struct clk_ops pllc2_clk_ops = {
 
 struct clk pllc2_clk = {
 	.ops		= &pllc2_clk_ops,
-	.flags		= CLK_ENABLE_ON_INIT,
 	.parent		= &extal1_div2_clk,
 	.freq_table	= pllc2_freq_table,
 	.parent_table	= pllc2_parent,

From 9f6f11b65ea2da8fab4d6902595d770e89e64d93 Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Wed, 18 Aug 2010 03:37:19 +0000
Subject: [PATCH 013/728] ARM: mach-shmobile: ap4evb: modify FSI2 ID

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 8afdb1dab029..1b95f122ecf5 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -559,7 +559,7 @@ static struct resource fsi_resources[] = {
 
 static struct platform_device fsi_device = {
 	.name		= "sh_fsi2",
-	.id		= 0,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(fsi_resources),
 	.resource	= fsi_resources,
 	.dev	= {

From 7cacfa87d3018c68bef2defeda8948f753dfa9d0 Mon Sep 17 00:00:00 2001
From: David Gow <david@ingeniumdigital.com>
Date: Thu, 19 Aug 2010 15:43:56 +0800
Subject: [PATCH 014/728] HID: Add support for chicony multitouch screens.

Adds a hid quirk for the chicony multitouch screen found in the Acer
Aspire 1820pt notebook.

Signed-off-by: David Gow <david@ingeniumdigital.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-ids.h           | 1 +
 drivers/hid/usbhid/hid-quirks.c | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 85c6d13c9ffa..29051425ca0f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -149,6 +149,7 @@
 
 #define USB_VENDOR_ID_CHICONY		0x04f2
 #define USB_DEVICE_ID_CHICONY_TACTICAL_PAD	0x0418
+#define USB_DEVICE_ID_CHICONY_MULTI_TOUCH	0xb19d
 
 #define USB_VENDOR_ID_CIDC		0x1677
 
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 2643d3147621..1b222398ff54 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -77,6 +77,8 @@ static const struct hid_blacklist {
 
 	{ USB_VENDOR_ID_PI_ENGINEERING, USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL, HID_QUIRK_HIDINPUT_FORCE },
 
+	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT },
+
 	{ 0, 0 }
 };
 

From 410d878bd05315a19894b8b4685107f2cd0712a5 Mon Sep 17 00:00:00 2001
From: Arnd Hannemann <arnd@arndnet.de>
Date: Wed, 18 Aug 2010 16:24:13 +0000
Subject: [PATCH 015/728] ARM: mach-shmobile: ap4evb: fix write protect for
 SDHI1

SDHI1 on AP4EVB has no pin to detect write protection of a card.
This had the result that a card inserted in this slot was always detected
as read only. This patch adds the corresponding flag to disable
write protection detection for SDHI1.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/arm/mach-shmobile/board-ap4evb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 1b95f122ecf5..95935c83c306 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -25,6 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -308,6 +309,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
 	.tmio_ocr_mask	= MMC_VDD_165_195,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 };
 
 static struct resource sdhi1_resources[] = {

From 51e3c1b558b31b11bf5fc66d3c6f5adacf3573f7 Mon Sep 17 00:00:00 2001
From: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Date: Fri, 20 Aug 2010 10:36:34 +0300
Subject: [PATCH 016/728] x86, hwmon: Fix unsafe smp_processor_id() in
 thermal_throttle_add_dev

Fix BUG: using smp_processor_id() in preemptible thermal_throttle_add_dev.
We know the cpu number when calling thermal_throttle_add_dev, so we can
remove smp_processor_id call in thermal_throttle_add_dev by supplying
the cpu number as argument.

This should resolve kernel bugzilla 16615/16629.

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
LKML-Reference: <20100820073634.GB5209@swordfish.minsk.epam.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index c2a8b26d4fea..d9368eeda309 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -202,10 +202,11 @@ static int therm_throt_process(bool new_event, int event, int level)
 
 #ifdef CONFIG_SYSFS
 /* Add/Remove thermal_throttle interface for CPU device: */
-static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev)
+static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
+				unsigned int cpu)
 {
 	int err;
-	struct cpuinfo_x86 *c = &cpu_data(smp_processor_id());
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
 	err = sysfs_create_group(&sys_dev->kobj, &thermal_attr_group);
 	if (err)
@@ -251,7 +252,7 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb,
 	case CPU_UP_PREPARE:
 	case CPU_UP_PREPARE_FROZEN:
 		mutex_lock(&therm_cpu_lock);
-		err = thermal_throttle_add_dev(sys_dev);
+		err = thermal_throttle_add_dev(sys_dev, cpu);
 		mutex_unlock(&therm_cpu_lock);
 		WARN_ON(err);
 		break;
@@ -287,7 +288,7 @@ static __init int thermal_throttle_init_device(void)
 #endif
 	/* connect live CPUs to sysfs */
 	for_each_online_cpu(cpu) {
-		err = thermal_throttle_add_dev(get_cpu_sysdev(cpu));
+		err = thermal_throttle_add_dev(get_cpu_sysdev(cpu), cpu);
 		WARN_ON(err);
 	}
 #ifdef CONFIG_HOTPLUG_CPU

From a38b372fc2a3d8fe7ddbeab94d4c8bcb721f2403 Mon Sep 17 00:00:00 2001
From: Jason Wang <jason77.wang@gmail.com>
Date: Sat, 21 Aug 2010 16:24:03 +0800
Subject: [PATCH 017/728] mxc/tzic: add base address when accessing TZIC
 registers

When we call tzic_enable_wake function, the kernel will crash because
of access to an unmapped address. This is because two register
access operations forgot to add base address.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/tzic.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index b3da9aad4295..3703ab28257f 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -164,8 +164,9 @@ int tzic_enable_wake(int is_idle)
 		return -EAGAIN;
 
 	for (i = 0; i < 4; i++) {
-		v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
-		__raw_writel(v, TZIC_WAKEUP0(i));
+		v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
+			wakeup_intr[i];
+		__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
 	}
 
 	return 0;

From 7f67bff58662604874778e6853e5c394f944e554 Mon Sep 17 00:00:00 2001
From: Jason Wang <jason77.wang@gmail.com>
Date: Sat, 21 Aug 2010 16:24:04 +0800
Subject: [PATCH 018/728] mx5/clock: fix clear bit fields issue in
 _clk_ccgr_disable function

We can see MXC_CCM_CCGRx_MOD_OFF is defined as 0 while
MXC_CCM_CCGRx_CG_MASK is defined as 0x3 in crm_regs.h, here in the
_clk_ccgr_disable function, we want to clear the corresponding enable
bit fields to disable this clock, so we should choose MASK instead of
OFF otherwise clocks can't be disabled.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx5/clock-mx51.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
index 6af69def357f..57c10a9926cc 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -56,7 +56,7 @@ static void _clk_ccgr_disable(struct clk *clk)
 {
 	u32 reg;
 	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
 	__raw_writel(reg, clk->enable_reg);
 
 }

From 14f0f512ba6f4eccc9b7cf67be47439ed2917afb Mon Sep 17 00:00:00 2001
From: Jason Wang <jason77.wang@gmail.com>
Date: Sat, 21 Aug 2010 16:24:05 +0800
Subject: [PATCH 019/728] ARM: imx: set cache line size to 64 bytes for i.MX5

The core of i.MX5 series is cortex-A8, its cache line size is 64 bytes
instead of 32 bytes. Refer to the OMAP3's selection, we choose 64
bytes for i.MX5, this can increase a little bit performance when
perform cache operations.

Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0527e65318f4..6785db4179b8 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -43,6 +43,7 @@ config ARCH_MXC91231
 config ARCH_MX5
 	bool "MX5-based"
 	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
 	help
 	  This enables support for systems based on the Freescale i.MX51 family
 

From 96aa1b419d47286db446f292cf898bb1a8b27f24 Mon Sep 17 00:00:00 2001
From: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Date: Mon, 23 Aug 2010 10:56:30 +0200
Subject: [PATCH 020/728] blkio: Fix return code for mkdir calls

If the cgroup hierarchy for blkio control groups is deeper than two
levels, kernel should not allow the creation of further levels. mkdir
system call does not except EINVAL as a return value. This patch
replaces EINVAL with more appropriate EPERM

Signed-off-by: Ciju Rajan K <ciju@linux.vnet.ibm.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-cgroup.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index a6809645d212..2fef1ef931a0 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -966,7 +966,7 @@ blkiocg_create(struct cgroup_subsys *subsys, struct cgroup *cgroup)
 
 	/* Currently we do not support hierarchy deeper than two level (0,1) */
 	if (parent != cgroup->top_cgroup)
-		return ERR_PTR(-EINVAL);
+		return ERR_PTR(-EPERM);
 
 	blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL);
 	if (!blkcg)

From 75230ff2751e88d594a13a70eae2c146f45e323b Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Mon, 23 Aug 2010 11:02:17 +0200
Subject: [PATCH 021/728] cciss: disable doorbell reset on reset_devices

The doorbell reset initially appears to work correctly,
the controller resets, comes up, some i/o can even be
done, but on at least some Smart Arrays in some servers,
it eventually causes a subsequent controller lockup due
to some kind of PCIe error, and kdump can end up leaving
the root filesystem in an unbootable state.  For this
reason, until the problem is fixed, or at least isolated
to certain hardware enough to be avoided, the doorbell
reset should not be used at all.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 31064df1370a..ce1a75df5902 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4519,6 +4519,12 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 	misc_fw_support = readl(&cfgtable->misc_fw_support);
 	use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
 
+	/* The doorbell reset seems to cause lockups on some Smart
+	 * Arrays (e.g. P410, P410i, maybe others).  Until this is
+	 * fixed or at least isolated, avoid the doorbell reset.
+	 */
+	use_doorbell = 0;
+
 	rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
 	if (rc)
 		goto unmap_cfgtable;

From b6508c1618e7aab085f191efb41b7b019a94ea38 Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 23 Aug 2010 12:23:33 +0200
Subject: [PATCH 022/728] cfq-iosched: Do not idle if slice_idle=0

Do not idle either on cfq queue or service tree if slice_idle=0. User does
not want any queue or service tree idling. Currently even if slice_idle=0,
we were waiting for request to finish before expiring the queue and that
can lead to lower queue depths.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/cfq-iosched.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index eb4086f7dfef..8830569542c4 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1839,6 +1839,9 @@ static bool cfq_should_idle(struct cfq_data *cfqd, struct cfq_queue *cfqq)
 	BUG_ON(!service_tree);
 	BUG_ON(!service_tree->count);
 
+	if (!cfqd->cfq_slice_idle)
+		return false;
+
 	/* We never do for idle class queues. */
 	if (prio == IDLE_WORKLOAD)
 		return false;
@@ -1879,7 +1882,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	/*
 	 * idle is disabled, either manually or by past process history
 	 */
-	if (!cfqd->cfq_slice_idle || !cfq_should_idle(cfqd, cfqq))
+	if (!cfq_should_idle(cfqd, cfqq))
 		return;
 
 	/*

From 02b35081fc98f681411586d3acf9eaad8b8f6e07 Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 23 Aug 2010 12:23:53 +0200
Subject: [PATCH 023/728] cfq-iosched: Do group share accounting in IOPS when
 slice_idle=0

o Implement another CFQ mode where we charge group in terms of number
  of requests dispatched instead of measuring the time. Measuring in terms
  of time is not possible when we are driving deeper queue depths and there
  are requests from multiple cfq queues in the request queue.

o This mode currently gets activated if one sets slice_idle=0 and associated
  disk supports NCQ. Again the idea is that on an NCQ disk with idling disabled
  most of the queues will dispatch 1 or more requests and then cfq queue
  expiry happens and we don't have a way to measure time. So start providing
  fairness in terms of IOPS.

o Currently IOPS mode works only with cfq group scheduling. CFQ is following
  different scheduling algorithms for queue and group scheduling. These IOPS
  stats are used only for group scheduling hence in non-croup mode nothing
  should change.

o For CFQ group scheduling one can disable slice idling so that we don't idle
  on queue and drive deeper request queue depths (achieving better throughput),
  at the same time group idle is enabled so one should get service
  differentiation among groups.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/cfq-iosched.c | 30 ++++++++++++++++++++++++------
 1 file changed, 24 insertions(+), 6 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 8830569542c4..3fc6be110c1d 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -378,6 +378,21 @@ CFQ_CFQQ_FNS(wait_busy);
 			&cfqg->service_trees[i][j]: NULL) \
 
 
+static inline bool iops_mode(struct cfq_data *cfqd)
+{
+	/*
+	 * If we are not idling on queues and it is a NCQ drive, parallel
+	 * execution of requests is on and measuring time is not possible
+	 * in most of the cases until and unless we drive shallower queue
+	 * depths and that becomes a performance bottleneck. In such cases
+	 * switch to start providing fairness in terms of number of IOs.
+	 */
+	if (!cfqd->cfq_slice_idle && cfqd->hw_tag)
+		return true;
+	else
+		return false;
+}
+
 static inline enum wl_prio_t cfqq_prio(struct cfq_queue *cfqq)
 {
 	if (cfq_class_idle(cfqq))
@@ -906,7 +921,6 @@ static inline unsigned int cfq_cfqq_slice_usage(struct cfq_queue *cfqq)
 			slice_used = cfqq->allocated_slice;
 	}
 
-	cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u", slice_used);
 	return slice_used;
 }
 
@@ -914,19 +928,21 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 				struct cfq_queue *cfqq)
 {
 	struct cfq_rb_root *st = &cfqd->grp_service_tree;
-	unsigned int used_sl, charge_sl;
+	unsigned int used_sl, charge;
 	int nr_sync = cfqg->nr_cfqq - cfqg_busy_async_queues(cfqd, cfqg)
 			- cfqg->service_tree_idle.count;
 
 	BUG_ON(nr_sync < 0);
-	used_sl = charge_sl = cfq_cfqq_slice_usage(cfqq);
+	used_sl = charge = cfq_cfqq_slice_usage(cfqq);
 
-	if (!cfq_cfqq_sync(cfqq) && !nr_sync)
-		charge_sl = cfqq->allocated_slice;
+	if (iops_mode(cfqd))
+		charge = cfqq->slice_dispatch;
+	else if (!cfq_cfqq_sync(cfqq) && !nr_sync)
+		charge = cfqq->allocated_slice;
 
 	/* Can't update vdisktime while group is on service tree */
 	cfq_rb_erase(&cfqg->rb_node, st);
-	cfqg->vdisktime += cfq_scale_slice(charge_sl, cfqg);
+	cfqg->vdisktime += cfq_scale_slice(charge, cfqg);
 	__cfq_group_service_tree_add(st, cfqg);
 
 	/* This group is being expired. Save the context */
@@ -940,6 +956,8 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
+	cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u",
+			used_sl, cfqq->slice_dispatch, charge, iops_mode(cfqd));
 	cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
 	cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
 }

From 80bdf0c78fff075dfa21576273c8b0c7db22bdfe Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 23 Aug 2010 12:24:26 +0200
Subject: [PATCH 024/728] cfq-iosched: Implement tunable group_idle

o Implement a new tunable group_idle, which allows idling on the group
  instead of a cfq queue. Hence one can set slice_idle = 0 and not idle
  on the individual queues but idle on the group. This way on fast storage
  we can get fairness between groups at the same time overall throughput
  improves.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/cfq-iosched.c | 65 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 56 insertions(+), 9 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 3fc6be110c1d..85e48192754d 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -30,6 +30,7 @@ static const int cfq_slice_sync = HZ / 10;
 static int cfq_slice_async = HZ / 25;
 static const int cfq_slice_async_rq = 2;
 static int cfq_slice_idle = HZ / 125;
+static int cfq_group_idle = HZ / 125;
 static const int cfq_target_latency = HZ * 3/10; /* 300 ms */
 static const int cfq_hist_divisor = 4;
 
@@ -198,6 +199,8 @@ struct cfq_group {
 	struct hlist_node cfqd_node;
 	atomic_t ref;
 #endif
+	/* number of requests that are on the dispatch list or inside driver */
+	int dispatched;
 };
 
 /*
@@ -271,6 +274,7 @@ struct cfq_data {
 	unsigned int cfq_slice[2];
 	unsigned int cfq_slice_async_rq;
 	unsigned int cfq_slice_idle;
+	unsigned int cfq_group_idle;
 	unsigned int cfq_latency;
 	unsigned int cfq_group_isolation;
 
@@ -1884,7 +1888,7 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 {
 	struct cfq_queue *cfqq = cfqd->active_queue;
 	struct cfq_io_context *cic;
-	unsigned long sl;
+	unsigned long sl, group_idle = 0;
 
 	/*
 	 * SSD device without seek penalty, disable idling. But only do so
@@ -1900,8 +1904,13 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 	/*
 	 * idle is disabled, either manually or by past process history
 	 */
-	if (!cfq_should_idle(cfqd, cfqq))
-		return;
+	if (!cfq_should_idle(cfqd, cfqq)) {
+		/* no queue idling. Check for group idling */
+		if (cfqd->cfq_group_idle)
+			group_idle = cfqd->cfq_group_idle;
+		else
+			return;
+	}
 
 	/*
 	 * still active requests from this queue, don't idle
@@ -1928,13 +1937,21 @@ static void cfq_arm_slice_timer(struct cfq_data *cfqd)
 		return;
 	}
 
+	/* There are other queues in the group, don't do group idle */
+	if (group_idle && cfqq->cfqg->nr_cfqq > 1)
+		return;
+
 	cfq_mark_cfqq_wait_request(cfqq);
 
-	sl = cfqd->cfq_slice_idle;
+	if (group_idle)
+		sl = cfqd->cfq_group_idle;
+	else
+		sl = cfqd->cfq_slice_idle;
 
 	mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
 	cfq_blkiocg_update_set_idle_time_stats(&cfqq->cfqg->blkg);
-	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
+	cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu group_idle: %d", sl,
+			group_idle ? 1 : 0);
 }
 
 /*
@@ -1950,6 +1967,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
 	cfqq->next_rq = cfq_find_next_rq(cfqd, cfqq, rq);
 	cfq_remove_request(rq);
 	cfqq->dispatched++;
+	(RQ_CFQG(rq))->dispatched++;
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
@@ -2219,7 +2237,7 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 			cfqq = NULL;
 			goto keep_queue;
 		} else
-			goto expire;
+			goto check_group_idle;
 	}
 
 	/*
@@ -2247,8 +2265,23 @@ static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
 	 * flight or is idling for a new request, allow either of these
 	 * conditions to happen (or time out) before selecting a new queue.
 	 */
-	if (timer_pending(&cfqd->idle_slice_timer) ||
-	    (cfqq->dispatched && cfq_should_idle(cfqd, cfqq))) {
+	if (timer_pending(&cfqd->idle_slice_timer)) {
+		cfqq = NULL;
+		goto keep_queue;
+	}
+
+	if (cfqq->dispatched && cfq_should_idle(cfqd, cfqq)) {
+		cfqq = NULL;
+		goto keep_queue;
+	}
+
+	/*
+	 * If group idle is enabled and there are requests dispatched from
+	 * this group, wait for requests to complete.
+	 */
+check_group_idle:
+	if (cfqd->cfq_group_idle && cfqq->cfqg->nr_cfqq == 1
+	    && cfqq->cfqg->dispatched) {
 		cfqq = NULL;
 		goto keep_queue;
 	}
@@ -3396,6 +3429,7 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 	WARN_ON(!cfqq->dispatched);
 	cfqd->rq_in_driver--;
 	cfqq->dispatched--;
+	(RQ_CFQG(rq))->dispatched--;
 	cfq_blkiocg_update_completion_stats(&cfqq->cfqg->blkg,
 			rq_start_time_ns(rq), rq_io_start_time_ns(rq),
 			rq_data_dir(rq), rq_is_sync(rq));
@@ -3425,7 +3459,10 @@ static void cfq_completed_request(struct request_queue *q, struct request *rq)
 		 * the queue.
 		 */
 		if (cfq_should_wait_busy(cfqd, cfqq)) {
-			cfqq->slice_end = jiffies + cfqd->cfq_slice_idle;
+			unsigned long extend_sl = cfqd->cfq_slice_idle;
+			if (!cfqd->cfq_slice_idle)
+				extend_sl = cfqd->cfq_group_idle;
+			cfqq->slice_end = jiffies + extend_sl;
 			cfq_mark_cfqq_wait_busy(cfqq);
 			cfq_log_cfqq(cfqd, cfqq, "will busy wait");
 		}
@@ -3871,6 +3908,7 @@ static void *cfq_init_queue(struct request_queue *q)
 	cfqd->cfq_slice[1] = cfq_slice_sync;
 	cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
 	cfqd->cfq_slice_idle = cfq_slice_idle;
+	cfqd->cfq_group_idle = cfq_group_idle;
 	cfqd->cfq_latency = 1;
 	cfqd->cfq_group_isolation = 0;
 	cfqd->hw_tag = -1;
@@ -3943,6 +3981,7 @@ SHOW_FUNCTION(cfq_fifo_expire_async_show, cfqd->cfq_fifo_expire[0], 1);
 SHOW_FUNCTION(cfq_back_seek_max_show, cfqd->cfq_back_max, 0);
 SHOW_FUNCTION(cfq_back_seek_penalty_show, cfqd->cfq_back_penalty, 0);
 SHOW_FUNCTION(cfq_slice_idle_show, cfqd->cfq_slice_idle, 1);
+SHOW_FUNCTION(cfq_group_idle_show, cfqd->cfq_group_idle, 1);
 SHOW_FUNCTION(cfq_slice_sync_show, cfqd->cfq_slice[1], 1);
 SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1);
 SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0);
@@ -3975,6 +4014,7 @@ STORE_FUNCTION(cfq_back_seek_max_store, &cfqd->cfq_back_max, 0, UINT_MAX, 0);
 STORE_FUNCTION(cfq_back_seek_penalty_store, &cfqd->cfq_back_penalty, 1,
 		UINT_MAX, 0);
 STORE_FUNCTION(cfq_slice_idle_store, &cfqd->cfq_slice_idle, 0, UINT_MAX, 1);
+STORE_FUNCTION(cfq_group_idle_store, &cfqd->cfq_group_idle, 0, UINT_MAX, 1);
 STORE_FUNCTION(cfq_slice_sync_store, &cfqd->cfq_slice[1], 1, UINT_MAX, 1);
 STORE_FUNCTION(cfq_slice_async_store, &cfqd->cfq_slice[0], 1, UINT_MAX, 1);
 STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1,
@@ -3996,6 +4036,7 @@ static struct elv_fs_entry cfq_attrs[] = {
 	CFQ_ATTR(slice_async),
 	CFQ_ATTR(slice_async_rq),
 	CFQ_ATTR(slice_idle),
+	CFQ_ATTR(group_idle),
 	CFQ_ATTR(low_latency),
 	CFQ_ATTR(group_isolation),
 	__ATTR_NULL
@@ -4049,6 +4090,12 @@ static int __init cfq_init(void)
 	if (!cfq_slice_idle)
 		cfq_slice_idle = 1;
 
+#ifdef CONFIG_CFQ_GROUP_IOSCHED
+	if (!cfq_group_idle)
+		cfq_group_idle = 1;
+#else
+		cfq_group_idle = 0;
+#endif
 	if (cfq_slab_setup())
 		return -ENOMEM;
 

From c4e7893ebc3a5c507b53f59b9de448db20849944 Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 23 Aug 2010 12:25:03 +0200
Subject: [PATCH 025/728] cfq-iosched: blktrace print per slice sector stats

o Divyesh had gotten rid of this code in the past. I want to re-introduce it
  back as it helps me a lot during debugging.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Divyesh Shah <dpshah@google.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/cfq-iosched.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 85e48192754d..f65c6f01c475 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -148,6 +148,8 @@ struct cfq_queue {
 	struct cfq_queue *new_cfqq;
 	struct cfq_group *cfqg;
 	struct cfq_group *orig_cfqg;
+	/* Number of sectors dispatched from queue in single dispatch round */
+	unsigned long nr_sectors;
 };
 
 /*
@@ -960,8 +962,9 @@ static void cfq_group_served(struct cfq_data *cfqd, struct cfq_group *cfqg,
 
 	cfq_log_cfqg(cfqd, cfqg, "served: vt=%llu min_vt=%llu", cfqg->vdisktime,
 					st->min_vdisktime);
-	cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u",
-			used_sl, cfqq->slice_dispatch, charge, iops_mode(cfqd));
+	cfq_log_cfqq(cfqq->cfqd, cfqq, "sl_used=%u disp=%u charge=%u iops=%u"
+			" sect=%u", used_sl, cfqq->slice_dispatch, charge,
+			iops_mode(cfqd), cfqq->nr_sectors);
 	cfq_blkiocg_update_timeslice_used(&cfqg->blkg, used_sl);
 	cfq_blkiocg_set_start_empty_time(&cfqg->blkg);
 }
@@ -1609,6 +1612,7 @@ static void __cfq_set_active_queue(struct cfq_data *cfqd,
 		cfqq->allocated_slice = 0;
 		cfqq->slice_end = 0;
 		cfqq->slice_dispatch = 0;
+		cfqq->nr_sectors = 0;
 
 		cfq_clear_cfqq_wait_request(cfqq);
 		cfq_clear_cfqq_must_dispatch(cfqq);
@@ -1971,6 +1975,7 @@ static void cfq_dispatch_insert(struct request_queue *q, struct request *rq)
 	elv_dispatch_sort(q, rq);
 
 	cfqd->rq_in_flight[cfq_cfqq_sync(cfqq)]++;
+	cfqq->nr_sectors += blk_rq_sectors(rq);
 	cfq_blkiocg_update_dispatch_stats(&cfqq->cfqg->blkg, blk_rq_bytes(rq),
 					rq_data_dir(rq), rq_is_sync(rq));
 }

From 6d6ac1c1a3d4f95953aa3b085e8f16692d3a7179 Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Mon, 23 Aug 2010 12:25:29 +0200
Subject: [PATCH 026/728] cfq-iosched: Documentation help for new tunables

Some documentation to provide help with tunables.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 Documentation/block/cfq-iosched.txt        | 45 ++++++++++++++++++++++
 Documentation/cgroups/blkio-controller.txt | 28 ++++++++++++++
 2 files changed, 73 insertions(+)
 create mode 100644 Documentation/block/cfq-iosched.txt

diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt
new file mode 100644
index 000000000000..e578feed6d81
--- /dev/null
+++ b/Documentation/block/cfq-iosched.txt
@@ -0,0 +1,45 @@
+CFQ ioscheduler tunables
+========================
+
+slice_idle
+----------
+This specifies how long CFQ should idle for next request on certain cfq queues
+(for sequential workloads) and service trees (for random workloads) before
+queue is expired and CFQ selects next queue to dispatch from.
+
+By default slice_idle is a non-zero value. That means by default we idle on
+queues/service trees. This can be very helpful on highly seeky media like
+single spindle SATA/SAS disks where we can cut down on overall number of
+seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues/service tree
+level and one should see an overall improved throughput on faster storage
+devices like multiple SATA/SAS disks in hardware RAID configuration. The down
+side is that isolation provided from WRITES also goes down and notion of
+IO priority becomes weaker.
+
+So depending on storage and workload, it might be useful to set slice_idle=0.
+In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
+keeping slice_idle enabled should be useful. For any configurations where
+there are multiple spindles behind single LUN (Host based hardware RAID
+controller or for storage arrays), setting slice_idle=0 might end up in better
+throughput and acceptable latencies.
+
+CFQ IOPS Mode for group scheduling
+===================================
+Basic CFQ design is to provide priority based time slices. Higher priority
+process gets bigger time slice and lower priority process gets smaller time
+slice. Measuring time becomes harder if storage is fast and supports NCQ and
+it would be better to dispatch multiple requests from multiple cfq queues in
+request queue at a time. In such scenario, it is not possible to measure time
+consumed by single queue accurately.
+
+What is possible though is to measure number of requests dispatched from a
+single queue and also allow dispatch from multiple cfq queue at the same time.
+This effectively becomes the fairness in terms of IOPS (IO operations per
+second).
+
+If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
+to IOPS mode and starts providing fairness in terms of number of requests
+dispatched. Note that this mode switching takes effect only for group
+scheduling. For non-cgroup users nothing should change.
diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt
index 48e0b21b0059..6919d62591d9 100644
--- a/Documentation/cgroups/blkio-controller.txt
+++ b/Documentation/cgroups/blkio-controller.txt
@@ -217,6 +217,7 @@ Details of cgroup files
 CFQ sysfs tunable
 =================
 /sys/block/<disk>/queue/iosched/group_isolation
+-----------------------------------------------
 
 If group_isolation=1, it provides stronger isolation between groups at the
 expense of throughput. By default group_isolation is 0. In general that
@@ -243,6 +244,33 @@ By default one should run with group_isolation=0. If that is not sufficient
 and one wants stronger isolation between groups, then set group_isolation=1
 but this will come at cost of reduced throughput.
 
+/sys/block/<disk>/queue/iosched/slice_idle
+------------------------------------------
+On a faster hardware CFQ can be slow, especially with sequential workload.
+This happens because CFQ idles on a single queue and single queue might not
+drive deeper request queue depths to keep the storage busy. In such scenarios
+one can try setting slice_idle=0 and that would switch CFQ to IOPS
+(IO operations per second) mode on NCQ supporting hardware.
+
+That means CFQ will not idle between cfq queues of a cfq group and hence be
+able to driver higher queue depth and achieve better throughput. That also
+means that cfq provides fairness among groups in terms of IOPS and not in
+terms of disk time.
+
+/sys/block/<disk>/queue/iosched/group_idle
+------------------------------------------
+If one disables idling on individual cfq queues and cfq service trees by
+setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
+on the group in an attempt to provide fairness among groups.
+
+By default group_idle is same as slice_idle and does not do anything if
+slice_idle is enabled.
+
+One can experience an overall throughput drop if you have created multiple
+groups and put applications in that group which are not driving enough
+IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
+on individual groups and throughput should improve.
+
 What works
 ==========
 - Currently only sync IO queues are support. All the buffered writes are

From 4ee69851cd4880f574d22f5ce08bec35b01c94e3 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 23 Aug 2010 12:28:15 +0200
Subject: [PATCH 027/728] cciss: handle allocation failure

If kmalloc() fails then cleanup and return failure (-1).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index ce1a75df5902..7191c16954d2 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4718,6 +4718,9 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	h->scatter_list = kmalloc(h->max_commands *
 						sizeof(struct scatterlist *),
 						GFP_KERNEL);
+	if (!h->scatter_list)
+		goto clean4;
+
 	for (k = 0; k < h->nr_cmds; k++) {
 		h->scatter_list[k] = kmalloc(sizeof(struct scatterlist) *
 							h->maxsgentries,

From c87ffbb812cf6150097a5095b031f4013a8f78a5 Mon Sep 17 00:00:00 2001
From: Xiaotian Feng <dfeng@redhat.com>
Date: Mon, 23 Aug 2010 12:30:29 +0200
Subject: [PATCH 028/728] block: put dev->kobj in blk_register_queue fail path

kernel needs to kobject_put on dev->kobj if elv_register_queue fails.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-sysfs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 001ab18078f5..0749b89c6885 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -511,6 +511,7 @@ int blk_register_queue(struct gendisk *disk)
 		kobject_uevent(&q->kobj, KOBJ_REMOVE);
 		kobject_del(&q->kobj);
 		blk_trace_remove_sysfs(disk_to_dev(disk));
+		kobject_put(&dev->kobj);
 		return ret;
 	}
 

From 5e00d1b5b4c10fb839afd5ce61db8e24339454b0 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 12 Aug 2010 14:31:06 +0200
Subject: [PATCH 029/728] BLOCK: fix bio.bi_rw handling

Return of the bi_rw tests is no longer bool after commit 74450be1. But
results of such tests are stored in bools. This doesn't fit in there
for some compilers (gcc 4.5 here), so either use !! magic to get real
bools or use ulong where the result is assigned somewhere.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-core.c     | 6 +++---
 drivers/block/loop.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index ee1a1e7e63cc..32a1c123dfb3 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1198,9 +1198,9 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	int el_ret;
 	unsigned int bytes = bio->bi_size;
 	const unsigned short prio = bio_prio(bio);
-	const bool sync = (bio->bi_rw & REQ_SYNC);
-	const bool unplug = (bio->bi_rw & REQ_UNPLUG);
-	const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
+	const bool sync = !!(bio->bi_rw & REQ_SYNC);
+	const bool unplug = !!(bio->bi_rw & REQ_UNPLUG);
+	const unsigned long ff = bio->bi_rw & REQ_FAILFAST_MASK;
 	int rw_flags;
 
 	if ((bio->bi_rw & REQ_HARDBARRIER) &&
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index f3c636d23718..91797bbbe702 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -477,7 +477,7 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
 	pos = ((loff_t) bio->bi_sector << 9) + lo->lo_offset;
 
 	if (bio_rw(bio) == WRITE) {
-		bool barrier = (bio->bi_rw & REQ_HARDBARRIER);
+		bool barrier = !!(bio->bi_rw & REQ_HARDBARRIER);
 		struct file *file = lo->lo_backing_file;
 
 		if (barrier) {

From 72f465033702ebfe20db8f50edaad59f0f38b0f5 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Mon, 23 Aug 2010 13:35:09 +0200
Subject: [PATCH 030/728] bio-integrity.c: remove dependency on __GFP_NOFAIL

The kmalloc() in bio_integrity_prep() is failable, so remove __GFP_NOFAIL
from its mask.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/bio-integrity.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index 612a5c38d3c1..a8f4cc679983 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -413,7 +413,7 @@ int bio_integrity_prep(struct bio *bio)
 
 	/* Allocate kernel buffer for protection data */
 	len = sectors * blk_integrity_tuple_size(bi);
-	buf = kmalloc(len, GFP_NOIO | __GFP_NOFAIL | q->bounce_gfp);
+	buf = kmalloc(len, GFP_NOIO | q->bounce_gfp);
 	if (unlikely(buf == NULL)) {
 		printk(KERN_ERR "could not allocate integrity buffer\n");
 		return -EIO;

From 220eb7fd984bfc7e6b4005fdf32efe9cd8af7cf2 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Mon, 23 Aug 2010 13:36:20 +0200
Subject: [PATCH 031/728] fs/bio-integrity.c: return -ENOMEM on kmalloc failure

Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/bio-integrity.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/bio-integrity.c b/fs/bio-integrity.c
index a8f4cc679983..4d0ff5ee27b8 100644
--- a/fs/bio-integrity.c
+++ b/fs/bio-integrity.c
@@ -416,7 +416,7 @@ int bio_integrity_prep(struct bio *bio)
 	buf = kmalloc(len, GFP_NOIO | q->bounce_gfp);
 	if (unlikely(buf == NULL)) {
 		printk(KERN_ERR "could not allocate integrity buffer\n");
-		return -EIO;
+		return -ENOMEM;
 	}
 
 	end = (((unsigned long) buf) + len + PAGE_SIZE - 1) >> PAGE_SHIFT;

From 5dd531a03ad721b41911ddb32e6e0481404e7aaf Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Mon, 23 Aug 2010 13:52:19 +0200
Subject: [PATCH 032/728] block: add function call to switch the IO scheduler
 from a driver

Currently drivers must do an elevator_exit() + elevator_init()
to switch IO schedulers. There are a few problems with this:

- Since commit 1abec4fdbb142e3ccb6ce99832fae42129134a96,
  elevator_init() requires a zeroed out q->elevator
  pointer. The two existing in-kernel users don't do that.

- It will only work at initialization time, since using the
  above two-staged construct does not properly quisce the queue.

So add elevator_change() which takes care of this, and convert
the elv_iosched_store() sysfs interface to use this helper as well.

Reported-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reported-by: Kevin Vigor <kevin@vigor.nu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/elevator.c         | 44 ++++++++++++++++++++++++++++------------
 include/linux/elevator.h |  1 +
 2 files changed, 32 insertions(+), 13 deletions(-)

diff --git a/block/elevator.c b/block/elevator.c
index ec585c9554d3..205b09a5bd9e 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -1009,18 +1009,19 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
 {
 	struct elevator_queue *old_elevator, *e;
 	void *data;
+	int err;
 
 	/*
 	 * Allocate new elevator
 	 */
 	e = elevator_alloc(q, new_e);
 	if (!e)
-		return 0;
+		return -ENOMEM;
 
 	data = elevator_init_queue(q, e);
 	if (!data) {
 		kobject_put(&e->kobj);
-		return 0;
+		return -ENOMEM;
 	}
 
 	/*
@@ -1043,7 +1044,8 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
 
 	__elv_unregister_queue(old_elevator);
 
-	if (elv_register_queue(q))
+	err = elv_register_queue(q);
+	if (err)
 		goto fail_register;
 
 	/*
@@ -1056,7 +1058,7 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e)
 
 	blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
 
-	return 1;
+	return 0;
 
 fail_register:
 	/*
@@ -1071,17 +1073,19 @@ fail_register:
 	queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
 	spin_unlock_irq(q->queue_lock);
 
-	return 0;
+	return err;
 }
 
-ssize_t elv_iosched_store(struct request_queue *q, const char *name,
-			  size_t count)
+/*
+ * Switch this queue to the given IO scheduler.
+ */
+int elevator_change(struct request_queue *q, const char *name)
 {
 	char elevator_name[ELV_NAME_MAX];
 	struct elevator_type *e;
 
 	if (!q->elevator)
-		return count;
+		return -ENXIO;
 
 	strlcpy(elevator_name, name, sizeof(elevator_name));
 	e = elevator_get(strstrip(elevator_name));
@@ -1092,13 +1096,27 @@ ssize_t elv_iosched_store(struct request_queue *q, const char *name,
 
 	if (!strcmp(elevator_name, q->elevator->elevator_type->elevator_name)) {
 		elevator_put(e);
-		return count;
+		return 0;
 	}
 
-	if (!elevator_switch(q, e))
-		printk(KERN_ERR "elevator: switch to %s failed\n",
-							elevator_name);
-	return count;
+	return elevator_switch(q, e);
+}
+EXPORT_SYMBOL(elevator_change);
+
+ssize_t elv_iosched_store(struct request_queue *q, const char *name,
+			  size_t count)
+{
+	int ret;
+
+	if (!q->elevator)
+		return count;
+
+	ret = elevator_change(q, name);
+	if (!ret)
+		return count;
+
+	printk(KERN_ERR "elevator: switch to %s failed\n", name);
+	return ret;
 }
 
 ssize_t elv_iosched_show(struct request_queue *q, char *name)
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 2c958f4fce1e..926b50322a46 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -136,6 +136,7 @@ extern ssize_t elv_iosched_store(struct request_queue *, const char *, size_t);
 
 extern int elevator_init(struct request_queue *, char *);
 extern void elevator_exit(struct elevator_queue *);
+extern int elevator_change(struct request_queue *, const char *);
 extern int elv_rq_merge_ok(struct request *, struct bio *);
 
 /*

From 52cc2eef31587b22ce9fbe77b064a031a9613ab0 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jaxboe@fusionio.com>
Date: Mon, 23 Aug 2010 14:02:44 +0200
Subject: [PATCH 033/728] block: switch s390 tape_block and mg_disk to
 elevator_change()

Now that we have this API, switch the two in-kernel users to it.
Resolves an oops introduced by commit
1abec4fdbb142e3ccb6ce99832fae42129134a96.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/mg_disk.c        | 3 +--
 drivers/s390/char/tape_block.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index b82c5ce5e9df..76fa3deaee84 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -974,8 +974,7 @@ static int mg_probe(struct platform_device *plat_dev)
 	host->breq->queuedata = host;
 
 	/* mflash is random device, thanx for the noop */
-	elevator_exit(host->breq->elevator);
-	err = elevator_init(host->breq, "noop");
+	err = elevator_change(host->breq, "noop");
 	if (err) {
 		printk(KERN_ERR "%s:%d (elevator_init) fail\n",
 				__func__, __LINE__);
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index b7de02525ec9..85cf607fc78f 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -217,8 +217,7 @@ tapeblock_setup_device(struct tape_device * device)
 	if (!blkdat->request_queue)
 		return -ENOMEM;
 
-	elevator_exit(blkdat->request_queue->elevator);
-	rc = elevator_init(blkdat->request_queue, "noop");
+	rc = elevator_change(blkdat->request_queue, "noop");
 	if (rc)
 		goto cleanup_queue;
 

From 77f4b9fe050d59a30c3b11e267289630bb13f56a Mon Sep 17 00:00:00 2001
From: Shuduo Sang <shuduo.sang@intel.com>
Date: Tue, 24 Aug 2010 14:35:17 +0100
Subject: [PATCH 034/728] intel_pmic_battery: Fix battery charging status on
 mrst

The arguments got swapped on some functions which produces undefined results.
The main one got fixed before submit but the other two were missed.

Signed-off-by: Shuduo Sang <shuduo.sang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/intel_mid_battery.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c
index c61ffec2ff10..2a10cd361181 100644
--- a/drivers/power/intel_mid_battery.c
+++ b/drivers/power/intel_mid_battery.c
@@ -185,8 +185,8 @@ static int pmic_scu_ipc_battery_property_get(struct battery_property *prop)
 {
 	u32 data[3];
 	u8 *p = (u8 *)&data[1];
-	int err = intel_scu_ipc_command(IPC_CMD_BATTERY_PROPERTY,
-				IPCMSG_BATTERY, NULL, 0, data, 3);
+	int err = intel_scu_ipc_command(IPCMSG_BATTERY,
+				IPC_CMD_BATTERY_PROPERTY, NULL, 0, data, 3);
 
 	prop->capacity = data[0];
 	prop->crnt = *p++;
@@ -207,7 +207,7 @@ static int pmic_scu_ipc_battery_property_get(struct battery_property *prop)
 
 static int pmic_scu_ipc_set_charger(int charger)
 {
-	return intel_scu_ipc_simple_command(charger, IPCMSG_BATTERY);
+	return intel_scu_ipc_simple_command(IPCMSG_BATTERY, charger);
 }
 
 /**

From 426409b1edcd7db922dd326911eba23d5a06d098 Mon Sep 17 00:00:00 2001
From: Decio Fonini <fonini@techk.org>
Date: Tue, 24 Aug 2010 17:45:49 +0200
Subject: [PATCH 035/728] HID: Kanvus Note A5 tablet needs
 HID_QUIRK_MULTI_INPUT

The Kanvus Note A5 tablet (with USB ID 5543:6001, USB vendor UC_Logic) needs
the HID_QUIRK_MULTI_INPUT in order to work out of the box; otherwise, we get
the usual "cursor stuck at the upper left corner of the screen".

Signed-off-by: Decio Fonini <fonini@techk.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-ids.h           | 1 +
 drivers/hid/usbhid/hid-quirks.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 29051425ca0f..b309525ae280 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -508,6 +508,7 @@
 #define USB_VENDOR_ID_UCLOGIC		0x5543
 #define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209	0x0042
 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U	0x0003
+#define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5	0x6001
 
 #define USB_VENDOR_ID_VERNIER		0x08f7
 #define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 1b222398ff54..89fa4ac989f9 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -69,6 +69,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 

From c29771c2d8ceb907ed45eb8c7fc0450308140aca Mon Sep 17 00:00:00 2001
From: Alan Ott <alan@signal11.us>
Date: Tue, 17 Aug 2010 00:44:04 -0400
Subject: [PATCH 036/728] HID: Set Report ID properly for Output reports on the
 Control endpoint.

When I made commit 29129a98e6fc89 ("HID: Send Report ID when numbered
reports are sent over the control endpoint"), I didn't account for *buf
not being the report ID anymore, as buf is incremented.

Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index b729c0286679..ffd6899d4ba0 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -828,6 +828,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
 		}
 	} else {
 		int skipped_report_id = 0;
+		int report_id = buf[0];
 		if (buf[0] == 0x0) {
 			/* Don't send the Report ID */
 			buf++;
@@ -837,7 +838,7 @@ static int usbhid_output_raw_report(struct hid_device *hid, __u8 *buf, size_t co
 		ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			HID_REQ_SET_REPORT,
 			USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-			((report_type + 1) << 8) | *buf,
+			((report_type + 1) << 8) | report_id,
 			interface->desc.bInterfaceNumber, buf, count,
 			USB_CTRL_SET_TIMEOUT);
 		/* count also the report id, if this was a numbered report. */

From b7d460897739e02f186425b7276e3fdb1595cea7 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Tue, 24 Aug 2010 22:44:12 -0700
Subject: [PATCH 037/728] x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline

rc2 kernel crashes when booting second cpu on this CONFIG_VMSPLIT_2G_OPT
laptop: whereas cloning from kernel to low mappings pgd range does need
to limit by both KERNEL_PGD_PTRS and KERNEL_PGD_BOUNDARY, cloning kernel
pgd range itself must not be limited by the smaller KERNEL_PGD_BOUNDARY.

Signed-off-by: Hugh Dickins <hughd@google.com>
LKML-Reference: <alpine.LSU.2.00.1008242235120.2515@sister.anvils>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/trampoline.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
index a874495b3673..e2a595257390 100644
--- a/arch/x86/kernel/trampoline.c
+++ b/arch/x86/kernel/trampoline.c
@@ -45,8 +45,7 @@ void __init setup_trampoline_page_table(void)
 	/* Copy kernel address range */
 	clone_pgd_range(trampoline_pg_dir + KERNEL_PGD_BOUNDARY,
 			swapper_pg_dir + KERNEL_PGD_BOUNDARY,
-			min_t(unsigned long, KERNEL_PGD_PTRS,
-			      KERNEL_PGD_BOUNDARY));
+			KERNEL_PGD_PTRS);
 
 	/* Initialize low mappings */
 	clone_pgd_range(trampoline_pg_dir,

From 750d857c682f4db60d14722d430c7ccc35070962 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 13 Aug 2010 16:29:04 +0200
Subject: [PATCH 038/728] oprofile: fix crash when accessing freed task structs

This patch fixes a crash during shutdown reported below. The crash is
caused by accessing already freed task structs. The fix changes the
order for registering and unregistering notifier callbacks.

All notifiers must be initialized before buffers start working. To
stop buffer synchronization we cancel all workqueues, unregister the
notifier callback and then flush all buffers. After all of this we
finally can free all tasks listed.

This should avoid accessing freed tasks.

On 22.07.10 01:14:40, Benjamin Herrenschmidt wrote:

> So the initial observation is a spinlock bad magic followed by a crash
> in the spinlock debug code:
>
> [ 1541.586531] BUG: spinlock bad magic on CPU#5, events/5/136
> [ 1541.597564] Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d03
>
> Backtrace looks like:
>
>       spin_bug+0x74/0xd4
>       ._raw_spin_lock+0x48/0x184
>       ._spin_lock+0x10/0x24
>       .get_task_mm+0x28/0x8c
>       .sync_buffer+0x1b4/0x598
>       .wq_sync_buffer+0xa0/0xdc
>       .worker_thread+0x1d8/0x2a8
>       .kthread+0xa8/0xb4
>       .kernel_thread+0x54/0x70
>
> So we are accessing a freed task struct in the work queue when
> processing the samples.

Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 drivers/oprofile/buffer_sync.c | 27 ++++++++++++++-------------
 drivers/oprofile/cpu_buffer.c  |  2 --
 2 files changed, 14 insertions(+), 15 deletions(-)

diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c
index a9352b2c7ac4..b7e755f4178a 100644
--- a/drivers/oprofile/buffer_sync.c
+++ b/drivers/oprofile/buffer_sync.c
@@ -141,16 +141,6 @@ static struct notifier_block module_load_nb = {
 	.notifier_call = module_load_notify,
 };
 
-
-static void end_sync(void)
-{
-	end_cpu_work();
-	/* make sure we don't leak task structs */
-	process_task_mortuary();
-	process_task_mortuary();
-}
-
-
 int sync_start(void)
 {
 	int err;
@@ -158,7 +148,7 @@ int sync_start(void)
 	if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
 		return -ENOMEM;
 
-	start_cpu_work();
+	mutex_lock(&buffer_mutex);
 
 	err = task_handoff_register(&task_free_nb);
 	if (err)
@@ -173,7 +163,10 @@ int sync_start(void)
 	if (err)
 		goto out4;
 
+	start_cpu_work();
+
 out:
+	mutex_unlock(&buffer_mutex);
 	return err;
 out4:
 	profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
@@ -182,7 +175,6 @@ out3:
 out2:
 	task_handoff_unregister(&task_free_nb);
 out1:
-	end_sync();
 	free_cpumask_var(marked_cpus);
 	goto out;
 }
@@ -190,11 +182,20 @@ out1:
 
 void sync_stop(void)
 {
+	/* flush buffers */
+	mutex_lock(&buffer_mutex);
+	end_cpu_work();
 	unregister_module_notifier(&module_load_nb);
 	profile_event_unregister(PROFILE_MUNMAP, &munmap_nb);
 	profile_event_unregister(PROFILE_TASK_EXIT, &task_exit_nb);
 	task_handoff_unregister(&task_free_nb);
-	end_sync();
+	mutex_unlock(&buffer_mutex);
+	flush_scheduled_work();
+
+	/* make sure we don't leak task structs */
+	process_task_mortuary();
+	process_task_mortuary();
+
 	free_cpumask_var(marked_cpus);
 }
 
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 219f79e2210a..f179ac2ea801 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -120,8 +120,6 @@ void end_cpu_work(void)
 
 		cancel_delayed_work(&b->work);
 	}
-
-	flush_scheduled_work();
 }
 
 /*

From 2a643ec67f9efc4b6921a3dd6e257f3b5360622b Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Wed, 25 Aug 2010 19:58:53 +0200
Subject: [PATCH 039/728] cciss: fix reporting of max queue depth since init

The ioctl path and the scsi tape path were not accounting
for their additions to the queue depth.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 7191c16954d2..6124c2fd2d33 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -297,6 +297,8 @@ static void enqueue_cmd_and_start_io(ctlr_info_t *h,
 	spin_lock_irqsave(&h->lock, flags);
 	addQ(&h->reqQ, c);
 	h->Qdepth++;
+	if (h->Qdepth > h->maxQsinceinit)
+		h->maxQsinceinit = h->Qdepth;
 	start_io(h);
 	spin_unlock_irqrestore(&h->lock, flags);
 }

From 6cb6cbeaa9d6573c674842b9471c0467967aae99 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Wed, 25 Aug 2010 08:58:50 -0700
Subject: [PATCH 040/728] MAINTAINERS: Add RCU's public git tree

RCU now has a public git tree, so add it via the T: line in the
MAINTAINERS file.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: joe@perches.com
LKML-Reference: <20100825155850.GA6601@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 5fa8451ec80c..614861a8f377 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4799,6 +4799,7 @@ RCUTORTURE MODULE
 M:	Josh Triplett <josh@freedesktop.org>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:	Supported
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
 
@@ -4823,6 +4824,7 @@ M:	Dipankar Sarma <dipankar@in.ibm.com>
 M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:	http://www.rdrop.com/users/paulmck/rclock/
 S:	Supported
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-2.6-rcu.git
 F:	Documentation/RCU/
 F:	include/linux/rcu*
 F:	include/linux/srcu*

From f7b66e5e51d31c45c6039db9a6da7863fb75be1e Mon Sep 17 00:00:00 2001
From: John Ogness <john.ogness@linutronix.de>
Date: Fri, 18 Jun 2010 18:59:47 +0200
Subject: [PATCH 041/728] mxc_nand: Do not do byte accesses to the NFC buffer.

This patch avoids byte access to the NFC buffer. Byte access to the
NFC is not allowed.

The patch is against linux-next 20100618.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/mxc_nand.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index fcf8ceb277d4..26caa01e34a6 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -402,16 +402,16 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host)
 	/* Wait for operation to complete */
 	wait_op_done(host, true);
 
-	if (this->options & NAND_BUSWIDTH_16) {
-		void __iomem *main_buf = host->main_area0;
-		/* compress the ID info */
-		writeb(readb(main_buf + 2), main_buf + 1);
-		writeb(readb(main_buf + 4), main_buf + 2);
-		writeb(readb(main_buf + 6), main_buf + 3);
-		writeb(readb(main_buf + 8), main_buf + 4);
-		writeb(readb(main_buf + 10), main_buf + 5);
-	}
 	memcpy(host->data_buf, host->main_area0, 16);
+
+	if (this->options & NAND_BUSWIDTH_16) {
+		/* compress the ID info */
+		host->data_buf[1] = host->data_buf[2];
+		host->data_buf[2] = host->data_buf[4];
+		host->data_buf[3] = host->data_buf[6];
+		host->data_buf[4] = host->data_buf[8];
+		host->data_buf[5] = host->data_buf[10];
+	}
 }
 
 static uint16_t get_dev_status_v3(struct mxc_nand_host *host)

From 5225c45899e872383ca39f5533d28ec63c54b39e Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Sun, 22 Aug 2010 04:29:17 +0200
Subject: [PATCH 042/728] perf: Initialize callchains roots's childen hits

Each histogram entry has a callchain root that stores the
callchain samples. However we forgot to initialize the
tracking of children hits of these roots, which then got
random values on their creation.

The root children hits is multiplied by the minimum percentage
of hits provided by the user, and the result becomes the minimum
hits expected from children branches. If the random value due
to the uninitialization is big enough, then this minimum number
of hits can be huge and eventually filter every children branches.

The end result was invisible callchains. All we need to
fix this is to initialize the children hits of the root.

Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: 2.6.32.x-2.6.35.y <stable@kernel.org>
---
 tools/perf/util/callchain.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 624a96c636fd..6de4313924fb 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -50,6 +50,7 @@ static inline void callchain_init(struct callchain_node *node)
 	INIT_LIST_HEAD(&node->children);
 	INIT_LIST_HEAD(&node->val);
 
+	node->children_hit = 0;
 	node->parent = NULL;
 	node->hit = 0;
 }

From 6628bc74f1aa9c35dd386320bf7ec04f12edb1b3 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 27 Aug 2010 09:15:09 +0200
Subject: [PATCH 043/728] writeback: do not lose wakeup events when forking bdi
 threads

This patch fixes the following issue:

INFO: task mount.nfs4:1120 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount.nfs4    D 00000000fffc6a21     0  1120   1119 0x00000000
 ffff880235643948 0000000000000046 ffffffff00000000 ffffffff00000000
 ffff880235643fd8 ffff880235314760 00000000001d44c0 ffff880235643fd8
 00000000001d44c0 00000000001d44c0 00000000001d44c0 00000000001d44c0
Call Trace:
 [<ffffffff813bc747>] schedule_timeout+0x34/0xf1
 [<ffffffff813bc530>] ? wait_for_common+0x3f/0x130
 [<ffffffff8106b50b>] ? trace_hardirqs_on+0xd/0xf
 [<ffffffff813bc5c3>] wait_for_common+0xd2/0x130
 [<ffffffff8104159c>] ? default_wake_function+0x0/0xf
 [<ffffffff813beaa0>] ? _raw_spin_unlock+0x26/0x2a
 [<ffffffff813bc6bb>] wait_for_completion+0x18/0x1a
 [<ffffffff81101a03>] sync_inodes_sb+0xca/0x1bc
 [<ffffffff811056a6>] __sync_filesystem+0x47/0x7e
 [<ffffffff81105798>] sync_filesystem+0x47/0x4b
 [<ffffffff810e7ffd>] generic_shutdown_super+0x22/0xd2
 [<ffffffff810e80f8>] kill_anon_super+0x11/0x4f
 [<ffffffffa00d06d7>] nfs4_kill_super+0x3f/0x72 [nfs]
 [<ffffffff810e7b68>] deactivate_locked_super+0x21/0x41
 [<ffffffff810e7fd6>] deactivate_super+0x40/0x45
 [<ffffffff810fc66c>] mntput_no_expire+0xb8/0xed
 [<ffffffff810fc73b>] release_mounts+0x9a/0xb0
 [<ffffffff810fc7bb>] put_mnt_ns+0x6a/0x7b
 [<ffffffffa00d0fb2>] nfs_follow_remote_path+0x19a/0x296 [nfs]
 [<ffffffffa00d11ca>] nfs4_try_mount+0x75/0xaf [nfs]
 [<ffffffffa00d1790>] nfs4_get_sb+0x276/0x2ff [nfs]
 [<ffffffff810e7dba>] vfs_kern_mount+0xb8/0x196
 [<ffffffff810e7ef6>] do_kern_mount+0x48/0xe8
 [<ffffffff810fdf68>] do_mount+0x771/0x7e8
 [<ffffffff810fe062>] sys_mount+0x83/0xbd
 [<ffffffff810089c2>] system_call_fastpath+0x16/0x1b

The reason of this hang was a race condition: when the flusher thread is
forking a bdi thread, we use 'kthread_run()', so we run it _before_ we make it
visible in 'bdi->wb.task'. The bdi thread runs, does all works, and goes sleep.
'bdi->wb.task' is still NULL. And this is a dangerous time window.

If at this time someone queues a work for this bdi, he does not see the bdi
thread and wakes up the forker thread instead! But the forker has already
forked this bdi thread, but just did not make it visible yet!

The result is that we lose the wake up event for this bdi thread and the NFS4
code waits forever.

To fix the problem, we should use 'ktrhead_create()' for creating bdi threads,
then make them visible in 'bdi->wb.task', and only after this wake them up.
This is exactly what this patch does.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 mm/backing-dev.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index eaa4a5bbe063..c2bf86f470ed 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -445,8 +445,8 @@ static int bdi_forker_thread(void *ptr)
 		switch (action) {
 		case FORK_THREAD:
 			__set_current_state(TASK_RUNNING);
-			task = kthread_run(bdi_writeback_thread, &bdi->wb, "flush-%s",
-					   dev_name(bdi->dev));
+			task = kthread_create(bdi_writeback_thread, &bdi->wb,
+					      "flush-%s", dev_name(bdi->dev));
 			if (IS_ERR(task)) {
 				/*
 				 * If thread creation fails, force writeout of
@@ -457,10 +457,13 @@ static int bdi_forker_thread(void *ptr)
 				/*
 				 * The spinlock makes sure we do not lose
 				 * wake-ups when racing with 'bdi_queue_work()'.
+				 * And as soon as the bdi thread is visible, we
+				 * can start it.
 				 */
 				spin_lock_bh(&bdi->wb_lock);
 				bdi->wb.task = task;
 				spin_unlock_bh(&bdi->wb_lock);
+				wake_up_process(task);
 			}
 			break;
 

From b76b4014f9d988d2412b873e4d4c13c7f9afc4e4 Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Sat, 28 Aug 2010 08:52:10 +0200
Subject: [PATCH 044/728] writeback: Fix lost wake-up shutting down writeback
 thread

Setting the task state here may cause us to miss the wake up from
kthread_stop(), so we need to recheck kthread_should_stop() or risk
sleeping forever in the following schedule().

Symptom was an indefinite hang on an NFSv4 mount.  (NFSv4 may create
multiple mounts in a temporary namespace while traversing the mount
path, and since the temporary namespace is immediately destroyed, it may
end up destroying a mount very soon after it was created, possibly
making this race more likely.)

INFO: task mount.nfs4:4314 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mount.nfs4    D 0000000000000000  2880  4314   4313 0x00000000
 ffff88001ed6da28 0000000000000046 ffff88001ed6dfd8 ffff88001ed6dfd8
 ffff88001ed6c000 ffff88001ed6c000 ffff88001ed6c000 ffff88001e5003a0
 ffff88001ed6dfd8 ffff88001e5003a8 ffff88001ed6c000 ffff88001ed6dfd8
Call Trace:
 [<ffffffff8196090d>] schedule_timeout+0x1cd/0x2e0
 [<ffffffff8106a31c>] ? mark_held_locks+0x6c/0xa0
 [<ffffffff819639a0>] ? _raw_spin_unlock_irq+0x30/0x60
 [<ffffffff8106a5fd>] ? trace_hardirqs_on_caller+0x14d/0x190
 [<ffffffff819671fe>] ? sub_preempt_count+0xe/0xd0
 [<ffffffff8195fc80>] wait_for_common+0x120/0x190
 [<ffffffff81033c70>] ? default_wake_function+0x0/0x20
 [<ffffffff8195fdcd>] wait_for_completion+0x1d/0x20
 [<ffffffff810595fa>] kthread_stop+0x4a/0x150
 [<ffffffff81061a60>] ? thaw_process+0x70/0x80
 [<ffffffff810cc68a>] bdi_unregister+0x10a/0x1a0
 [<ffffffff81229dc9>] nfs_put_super+0x19/0x20
 [<ffffffff810ee8c4>] generic_shutdown_super+0x54/0xe0
 [<ffffffff810ee9b6>] kill_anon_super+0x16/0x60
 [<ffffffff8122d3b9>] nfs4_kill_super+0x39/0x90
 [<ffffffff810eda45>] deactivate_locked_super+0x45/0x60
 [<ffffffff810edfb9>] deactivate_super+0x49/0x70
 [<ffffffff81108294>] mntput_no_expire+0x84/0xe0
 [<ffffffff811084ef>] release_mounts+0x9f/0xc0
 [<ffffffff81108575>] put_mnt_ns+0x65/0x80
 [<ffffffff8122cc56>] nfs_follow_remote_path+0x1e6/0x420
 [<ffffffff8122cfbf>] nfs4_try_mount+0x6f/0xd0
 [<ffffffff8122d0c2>] nfs4_get_sb+0xa2/0x360
 [<ffffffff810edcb8>] vfs_kern_mount+0x88/0x1f0
 [<ffffffff810ede92>] do_kern_mount+0x52/0x130
 [<ffffffff81963d9a>] ? _lock_kernel+0x6a/0x170
 [<ffffffff81108e9e>] do_mount+0x26e/0x7f0
 [<ffffffff81106b3a>] ? copy_mount_options+0xea/0x190
 [<ffffffff811094b8>] sys_mount+0x98/0xf0
 [<ffffffff810024d8>] system_call_fastpath+0x16/0x1b
1 lock held by mount.nfs4/4314:
 #0:  (&type->s_umount_key#24){+.+...}, at: [<ffffffff810edfb1>] deactivate_super+0x41/0x70

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/fs-writeback.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 7d9d06ba184b..81e086d8aa57 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -808,7 +808,7 @@ int bdi_writeback_thread(void *data)
 			wb->last_active = jiffies;
 
 		set_current_state(TASK_INTERRUPTIBLE);
-		if (!list_empty(&bdi->work_list)) {
+		if (!list_empty(&bdi->work_list) || kthread_should_stop()) {
 			__set_current_state(TASK_RUNNING);
 			continue;
 		}

From d9f66c1a46163c7c83411058516a69da547262f8 Mon Sep 17 00:00:00 2001
From: Mike Auty <ikelos@gentoo.org>
Date: Sat, 28 Aug 2010 20:35:17 -0700
Subject: [PATCH 045/728] Input: wacom - fix mousewheel handling for old wacom
 tablets

This fixes a regression introduced in
3b57ca0f80c5c8994b5b1e3d3f904cfe727951f2.

The data[6] byte contains either 1 or -1 depending on the whether the
mouse wheel on older wacom tablets is moved down (1) or up (-1).  The
patch introduced in the above commit changed the cast from (signed char)
to (signed).  When cast as a signed integer and negated, the value of -1
(stored in the byte as 0xff) became -255 rather than 1.  This patch
reverts the cast to a (signed char) and also removes an unnecessary
(signed) cast, as all the values operated on are bitmasked.

Signed-off-by: Mike Auty <ikelos@gentoo.org>
Reviewed-by: Ping Cheng <pingc@wacom.com>
Cc; stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/tablet/wacom_wac.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index 40d77ba8fdc1..6e29badb969e 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -243,10 +243,10 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
 			if (features->type == WACOM_G4 ||
 					features->type == WACOM_MO) {
 				input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
-				rw = (signed)(data[7] & 0x04) - (data[7] & 0x03);
+				rw = (data[7] & 0x04) - (data[7] & 0x03);
 			} else {
 				input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
-				rw = -(signed)data[6];
+				rw = -(signed char)data[6];
 			}
 			input_report_rel(input, REL_WHEEL, rw);
 		}

From 2c4e9671edfef534e9726366707d64e63d44e7e6 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 28 Aug 2010 20:35:17 -0700
Subject: [PATCH 046/728] Input: use PIT_TICK_RATE in vt beep ioctl

The KIOCSOUND and KDMKTONE ioctls are based on the CLOCK_TICK_RATE,
which is architecture and sometimes configuration specific.

In practice, most user applications assume that it is actually defined
as the i8253 PIT base clock of 1193182 Hz, which is true on some
architectures but not on others.

This patch makes the vt code use the PIT frequency on all
architectures, which is much more well-defined.  It will change the
behavior of user applications sending the beep ioctl on all
architectures that define CLOCK_TICK_RATE different from
PIT_TICK_RATE.

The original breakage was introduced in commit bcc8ca099 "Adapt
drivers/char/vt_ioctl.c to non-x86".  Hopefully, reverting this change
will make the frequency correct in more cases than it will make it
incorrect.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/char/vt_ioctl.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 2bbeaaea46e9..38df8c19e74c 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -533,11 +533,14 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 	case KIOCSOUND:
 		if (!perm)
 			goto eperm;
-		/* FIXME: This is an old broken API but we need to keep it
-		   supported and somehow separate the historic advertised
-		   tick rate from any real one */
+		/*
+		 * The use of PIT_TICK_RATE is historic, it used to be
+		 * the platform-dependent CLOCK_TICK_RATE between 2.6.12
+		 * and 2.6.36, which was a minor but unfortunate ABI
+		 * change.
+		 */
 		if (arg)
-			arg = CLOCK_TICK_RATE / arg;
+			arg = PIT_TICK_RATE / arg;
 		kd_mksound(arg, 0);
 		break;
 
@@ -553,11 +556,8 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
 		 */
 		ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
 		count = ticks ? (arg & 0xffff) : 0;
-		/* FIXME: This is an old broken API but we need to keep it
-		   supported and somehow separate the historic advertised
-		   tick rate from any real one */
 		if (count)
-			count = CLOCK_TICK_RATE / count;
+			count = PIT_TICK_RATE / count;
 		kd_mksound(count, ticks);
 		break;
 	}

From ba4d695a90c9176fca8e45d6c872bbf4e8bed315 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Sat, 28 Aug 2010 21:33:50 -0700
Subject: [PATCH 047/728] Input: MT - initialize slots to unused

For MT slots, the ABS_MT_TRACKING_ID determines whether a slot is in use,
but currently leaves initialization up to the drivers. This patch sets the
slot state to unused upon creation.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/input.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/input/input.c b/drivers/input/input.c
index a9b025f4147a..ab6982056518 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -1599,11 +1599,14 @@ EXPORT_SYMBOL(input_free_device);
  * @dev: input device supporting MT events and finger tracking
  * @num_slots: number of slots used by the device
  *
- * This function allocates all necessary memory for MT slot handling
- * in the input device, and adds ABS_MT_SLOT to the device capabilities.
+ * This function allocates all necessary memory for MT slot handling in the
+ * input device, and adds ABS_MT_SLOT to the device capabilities. All slots
+ * are initially marked as unused iby setting ABS_MT_TRACKING_ID to -1.
  */
 int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
 {
+	int i;
+
 	if (!num_slots)
 		return 0;
 
@@ -1614,6 +1617,10 @@ int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
 	dev->mtsize = num_slots;
 	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
 
+	/* Mark slots as 'unused' */
+	for (i = 0; i < num_slots; i++)
+		dev->mt[i].abs[ABS_MT_TRACKING_ID - ABS_MT_FIRST] = -1;
+
 	return 0;
 }
 EXPORT_SYMBOL(input_mt_create_slots);

From 50e77fcd790e02a095f906df0f6fa72afef7e11c Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.y.miao@gmail.com>
Date: Wed, 18 Aug 2010 11:51:13 +0800
Subject: [PATCH 048/728] ARM: pxa: remove __init from cpufreq_driver->init()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is causing section mismatches when linking, as cpufreq_driver->init()
is not supposed to be in init section.

Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cpufreq-pxa2xx.c | 2 +-
 arch/arm/mach-pxa/cpufreq-pxa3xx.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 268a9bc6be8a..50d5939a78f1 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -398,7 +398,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int i;
 	unsigned int freq;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
index 27fa329d9a8b..0a0d0fe99220 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -204,7 +204,7 @@ static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+static int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret = -EINVAL;
 

From be7a6d9dd67251675b83a29f4b15392eae62e70b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 13 Aug 2010 11:39:07 +0800
Subject: [PATCH 049/728] ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for
 pxa300

According to PXA3xx Processor Family Developer Manuall Vol1. section
"Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate
Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52
is CI_VSYNC.  This patch fixes the MFP defines and also corrects the
order of MFD defines.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/include/mach/mfp-pxa300.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
index 7139e0dc26d1..4e1287070d21 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -71,10 +71,10 @@
 #define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
 #define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
 #define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
-#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
-#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
 #define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
 #define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+#define GPIO51_CI_HSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO52_CI_VSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
 
 /* KEYPAD */
 #define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)

From b3282ab116cd7ebd2829ac8088524b5b279330e5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 12 Aug 2010 08:18:28 +0200
Subject: [PATCH 050/728] ARM: pxa: Make id const in pwm_probe()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This fixes the compiler warning:

	arch/arm/plat-pxa/pwm.c: In function 'pwm_probe':
	arch/arm/plat-pxa/pwm.c:179: warning: initialization discards qualifiers from pointer target type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/plat-pxa/pwm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index 0732c6c8d511..ef32686feef9 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -176,7 +176,7 @@ static inline void __add_pwm(struct pwm_device *pwm)
 
 static int __devinit pwm_probe(struct platform_device *pdev)
 {
-	struct platform_device_id *id = platform_get_device_id(pdev);
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct pwm_device *pwm, *secondary = NULL;
 	struct resource *r;
 	int ret = 0;

From ffb287c9daabc3734a92def0d59796f065ad29eb Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 26 Aug 2010 05:51:57 +0200
Subject: [PATCH 051/728] ARM: pxa168fb: fix section mismatch

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 drivers/video/pxa168fb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index c91a7f70f7b0..5d786bd3e304 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -559,7 +559,7 @@ static struct fb_ops pxa168fb_ops = {
 	.fb_imageblit	= cfb_imageblit,
 };
 
-static int __init pxa168fb_init_mode(struct fb_info *info,
+static int __devinit pxa168fb_init_mode(struct fb_info *info,
 			      struct pxa168fb_mach_info *mi)
 {
 	struct pxa168fb_info *fbi = info->par;
@@ -599,7 +599,7 @@ static int __init pxa168fb_init_mode(struct fb_info *info,
 	return ret;
 }
 
-static int __init pxa168fb_probe(struct platform_device *pdev)
+static int __devinit pxa168fb_probe(struct platform_device *pdev)
 {
 	struct pxa168fb_mach_info *mi;
 	struct fb_info *info = 0;
@@ -792,7 +792,7 @@ static struct platform_driver pxa168fb_driver = {
 	.probe		= pxa168fb_probe,
 };
 
-static int __devinit pxa168fb_init(void)
+static int __init pxa168fb_init(void)
 {
 	return platform_driver_register(&pxa168fb_driver);
 }

From fa66f07aa1f0950e1dc78b7ab39728b3f8aa77a1 Mon Sep 17 00:00:00 2001
From: Stephane Eranian <eranian@google.com>
Date: Thu, 26 Aug 2010 16:40:01 +0200
Subject: [PATCH 052/728] perf_events: Fix time tracking for events with pid !=
 -1 and cpu != -1

Per-thread events with a cpu filter, i.e., cpu != -1, were not
reporting correct timings when the thread never ran on the
monitored cpu. The time enabled was reported as a negative
value.

This patch fixes the problem by updating tstamp_stopped,
tstamp_running in event_sched_out() for events with filters and
which are marked as INACTIVE.

The function group_sched_out() is modified to systematically
call into event_sched_out() to avoid duplicating the timing
adjustment code twice.

With the patch, I now get:

$ task_cpu -i -e unhalted_core_cycles,unhalted_core_cycles
noploop 2 noploop for 2 seconds
CPU0 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)
CPU0 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)

CPU1 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)
CPU1 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)

CPU2 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)
CPU2 0		   unhalted_core_cycles (ena=1,991,136,594, run=0)

CPU3 4,747,990,931 unhalted_core_cycles (ena=1,991,136,594, run=1,991,136,594)
CPU3 4,747,990,931 unhalted_core_cycles (ena=1,991,136,594, run=1,991,136,594)

Signed-off-by: Stephane Eranian <eranian@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: perfmon2-devel@lists.sf.net
Cc: eranian@google.com
LKML-Reference: <4c76802d.aae9d80a.115d.70fe@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/perf_event.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 403d1804b198..657555a5f30f 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -402,11 +402,31 @@ static void perf_group_detach(struct perf_event *event)
 	}
 }
 
+static inline int
+event_filter_match(struct perf_event *event)
+{
+	return event->cpu == -1 || event->cpu == smp_processor_id();
+}
+
 static void
 event_sched_out(struct perf_event *event,
 		  struct perf_cpu_context *cpuctx,
 		  struct perf_event_context *ctx)
 {
+	u64 delta;
+	/*
+	 * An event which could not be activated because of
+	 * filter mismatch still needs to have its timings
+	 * maintained, otherwise bogus information is return
+	 * via read() for time_enabled, time_running:
+	 */
+	if (event->state == PERF_EVENT_STATE_INACTIVE
+	    && !event_filter_match(event)) {
+		delta = ctx->time - event->tstamp_stopped;
+		event->tstamp_running += delta;
+		event->tstamp_stopped = ctx->time;
+	}
+
 	if (event->state != PERF_EVENT_STATE_ACTIVE)
 		return;
 
@@ -432,9 +452,7 @@ group_sched_out(struct perf_event *group_event,
 		struct perf_event_context *ctx)
 {
 	struct perf_event *event;
-
-	if (group_event->state != PERF_EVENT_STATE_ACTIVE)
-		return;
+	int state = group_event->state;
 
 	event_sched_out(group_event, cpuctx, ctx);
 
@@ -444,7 +462,7 @@ group_sched_out(struct perf_event *group_event,
 	list_for_each_entry(event, &group_event->sibling_list, group_entry)
 		event_sched_out(event, cpuctx, ctx);
 
-	if (group_event->attr.exclusive)
+	if (state == PERF_EVENT_STATE_ACTIVE && group_event->attr.exclusive)
 		cpuctx->exclusive = 0;
 }
 

From c3dc66de59531c921c4638b1285075ea1c831186 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Mon, 30 Aug 2010 15:43:25 +0200
Subject: [PATCH 053/728] HID: add support for another BTC Emprex remote
 control

Add device ID for another variant of this remote control.

Reported-by: Gregor Fuis <gujs.lists@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-core.c    | 1 +
 drivers/hid/hid-ids.h     | 1 +
 drivers/hid/hid-topseed.c | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 0c52899be964..b2b3bb90dd64 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1287,6 +1287,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CANDO, USB_DEVICE_ID_CANDO_MULTI_TOUCH_11_6) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index b309525ae280..7c69f1ebb390 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -128,6 +128,7 @@
 
 #define USB_VENDOR_ID_BTC		0x046e
 #define USB_DEVICE_ID_BTC_EMPREX_REMOTE	0x5578
+#define USB_DEVICE_ID_BTC_EMPREX_REMOTE_2	0x5577
 
 #define USB_VENDOR_ID_CANDO		0x2087
 #define USB_DEVICE_ID_CANDO_MULTI_TOUCH	0x0a01
diff --git a/drivers/hid/hid-topseed.c b/drivers/hid/hid-topseed.c
index 5771f851f856..956ed9ac19d4 100644
--- a/drivers/hid/hid-topseed.c
+++ b/drivers/hid/hid-topseed.c
@@ -64,6 +64,7 @@ static int ts_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 static const struct hid_device_id ts_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
 	{ }
 };

From ebd11fecd3096b080c84fb35014916ae2b5ba64a Mon Sep 17 00:00:00 2001
From: Thierry Reding <thierry.reding@avionic-design.de>
Date: Mon, 30 Aug 2010 13:11:42 +0200
Subject: [PATCH 054/728] HID: Add quirk for eGalax touch controler.

This patch adds a quirk for the eGalax touch controller which reports
two pairs of axes.

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 89fa4ac989f9..16808f19a4b4 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -33,6 +33,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
+	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },

From edce6820a9fdda85521211cb334a183e34cc455e Mon Sep 17 00:00:00 2001
From: Jeffrey Carlyle <jeff.carlyle@motorola.com>
Date: Mon, 30 Aug 2010 19:55:09 +0200
Subject: [PATCH 055/728] scatterlist: prevent invalid free when alloc fails

When alloc fails, free_table is being called. Depending on the number of
bytes requested, we determine if we are going to call _get_free_page()
or kmalloc(). When alloc fails, our math is wrong (due to sg_size - 1),
and the last buffer is wrongfully assumed to have been allocated by
kmalloc. Hence, kfree gets called and a panic occurs.

Signed-off-by: Jeffrey Carlyle <jeff.carlyle@motorola.com>
Signed-off-by: Olusanya Soyannwo <c23746@motorola.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 lib/scatterlist.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a5ec42868f99..4ceb05d772ae 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -248,8 +248,18 @@ int __sg_alloc_table(struct sg_table *table, unsigned int nents,
 		left -= sg_size;
 
 		sg = alloc_fn(alloc_size, gfp_mask);
-		if (unlikely(!sg))
-			return -ENOMEM;
+		if (unlikely(!sg)) {
+			/*
+			 * Adjust entry count to reflect that the last
+			 * entry of the previous table won't be used for
+			 * linkage.  Without this, sg_kfree() may get
+			 * confused.
+			 */
+			if (prv)
+				table->nents = ++table->orig_nents;
+
+ 			return -ENOMEM;
+		}
 
 		sg_init_table(sg, alloc_size);
 		table->nents = table->orig_nents += sg_size;

From b137b9942a07843c64a934cfdb7d43155e507e13 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg@redhat.com>
Date: Mon, 23 Aug 2010 20:25:32 +0000
Subject: [PATCH 056/728] ACPI: Don't report current_now if battery reports in
 mWh

ACPI batteries can report in units of either current or energy. Right
now we expose the current_now file even if the battery is reporting
energy units, resulting in a file that should contain mA instead
containing mW. Don't expose this value unless the battery is reporting
current.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/battery.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index dc58402b0a17..98417201e9ce 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -273,7 +273,6 @@ static enum power_supply_property energy_battery_props[] = {
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_POWER_NOW,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,

From 10f0412f57f2a76a90eff4376f59cbb0a39e4e18 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 30 Aug 2010 10:56:18 +0200
Subject: [PATCH 057/728] oprofile, x86: fix init_sysfs error handling

On failure init_sysfs() might not properly free resources. The error
code of the function is not checked. And, when reinitializing the exit
function might be called twice. This patch fixes all this.

Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index f6b48f6c5951..73a41d3c6c09 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -568,8 +568,13 @@ static int __init init_sysfs(void)
 	int error;
 
 	error = sysdev_class_register(&oprofile_sysclass);
-	if (!error)
-		error = sysdev_register(&device_oprofile);
+	if (error)
+		return error;
+
+	error = sysdev_register(&device_oprofile);
+	if (error)
+		sysdev_class_unregister(&oprofile_sysclass);
+
 	return error;
 }
 
@@ -695,6 +700,8 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	char *cpu_type = NULL;
 	int ret = 0;
 
+	using_nmi = 0;
+
 	if (!cpu_has_apic)
 		return -ENODEV;
 
@@ -774,7 +781,10 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 
 	mux_init(ops);
 
-	init_sysfs();
+	ret = init_sysfs();
+	if (ret)
+		return ret;
+
 	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
 	return 0;

From 3aaba20f26f58843e8f20611e5c0b1c06954310f Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Mon, 23 Aug 2010 16:50:12 +0800
Subject: [PATCH 058/728] tracing: Fix a race in function profile

While we are reading trace_stat/functionX and someone just
disabled function_profile at that time, we can trigger this:

	divide error: 0000 [#1] PREEMPT SMP
	...
	EIP is at function_stat_show+0x90/0x230
	...

This fix just takes the ftrace_profile_lock and checks if
rec->counter is 0. If it's 0, we know the profile buffer
has been reset.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: stable@kernel.org
LKML-Reference: <4C723644.4040708@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/trace/ftrace.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 0d88ce9b9fb8..7cb1f45a1de1 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -381,12 +381,19 @@ static int function_stat_show(struct seq_file *m, void *v)
 {
 	struct ftrace_profile *rec = v;
 	char str[KSYM_SYMBOL_LEN];
+	int ret = 0;
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	static DEFINE_MUTEX(mutex);
 	static struct trace_seq s;
 	unsigned long long avg;
 	unsigned long long stddev;
 #endif
+	mutex_lock(&ftrace_profile_lock);
+
+	/* we raced with function_profile_reset() */
+	if (unlikely(rec->counter == 0)) {
+		ret = -EBUSY;
+		goto out;
+	}
 
 	kallsyms_lookup(rec->ip, NULL, NULL, NULL, str);
 	seq_printf(m, "  %-30.30s  %10lu", str, rec->counter);
@@ -408,7 +415,6 @@ static int function_stat_show(struct seq_file *m, void *v)
 		do_div(stddev, (rec->counter - 1) * 1000);
 	}
 
-	mutex_lock(&mutex);
 	trace_seq_init(&s);
 	trace_print_graph_duration(rec->time, &s);
 	trace_seq_puts(&s, "    ");
@@ -416,11 +422,12 @@ static int function_stat_show(struct seq_file *m, void *v)
 	trace_seq_puts(&s, "    ");
 	trace_print_graph_duration(stddev, &s);
 	trace_print_seq(m, &s);
-	mutex_unlock(&mutex);
 #endif
 	seq_putc(m, '\n');
+out:
+	mutex_unlock(&ftrace_profile_lock);
 
-	return 0;
+	return ret;
 }
 
 static void ftrace_profile_reset(struct ftrace_profile_stat *stat)

From 950eaaca681c44aab87a46225c9e44f902c080aa Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Tue, 31 Aug 2010 17:00:18 -0700
Subject: [PATCH 059/728] pid: make setpgid() system call use RCU read-side
 critical section

[   23.584719]
[   23.584720] ===================================================
[   23.585059] [ INFO: suspicious rcu_dereference_check() usage. ]
[   23.585176] ---------------------------------------------------
[   23.585176] kernel/pid.c:419 invoked rcu_dereference_check() without protection!
[   23.585176]
[   23.585176] other info that might help us debug this:
[   23.585176]
[   23.585176]
[   23.585176] rcu_scheduler_active = 1, debug_locks = 1
[   23.585176] 1 lock held by rc.sysinit/728:
[   23.585176]  #0:  (tasklist_lock){.+.+..}, at: [<ffffffff8104771f>] sys_setpgid+0x5f/0x193
[   23.585176]
[   23.585176] stack backtrace:
[   23.585176] Pid: 728, comm: rc.sysinit Not tainted 2.6.36-rc2 #2
[   23.585176] Call Trace:
[   23.585176]  [<ffffffff8105b436>] lockdep_rcu_dereference+0x99/0xa2
[   23.585176]  [<ffffffff8104c324>] find_task_by_pid_ns+0x50/0x6a
[   23.585176]  [<ffffffff8104c35b>] find_task_by_vpid+0x1d/0x1f
[   23.585176]  [<ffffffff81047727>] sys_setpgid+0x67/0x193
[   23.585176]  [<ffffffff810029eb>] system_call_fastpath+0x16/0x1b
[   24.959669] type=1400 audit(1282938522.956:4): avc:  denied  { module_request } for  pid=766 comm="hwclock" kmod="char-major-10-135" scontext=system_u:system_r:hwclock_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclas

It turns out that the setpgid() system call fails to enter an RCU
read-side critical section before doing a PID-to-task_struct translation.
This commit therefore does rcu_read_lock() before the translation, and
also does rcu_read_unlock() after the last use of the returned pointer.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
---
 kernel/sys.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sys.c b/kernel/sys.c
index e9ad44489828..7f5a0cd296a9 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -931,6 +931,7 @@ SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
 		pgid = pid;
 	if (pgid < 0)
 		return -EINVAL;
+	rcu_read_lock();
 
 	/* From this point forward we keep holding onto the tasklist lock
 	 * so that our parent does not change from under us. -DaveM
@@ -984,6 +985,7 @@ SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
 out:
 	/* All paths lead to here, thus we are safe. -DaveM */
 	write_unlock_irq(&tasklist_lock);
+	rcu_read_unlock();
 	return err;
 }
 

From 57157becdd1d23e6c2b8661ffe6c78d7d605d121 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 31 Aug 2010 17:27:02 -0700
Subject: [PATCH 060/728] Input: bcm5974 - adjust major/minor to scale

By visual inspection, the reported touch_major and touch_minor axes
are a factor of two too small. Presumably the device actually reports
the semi-major and semi-minor axes. Corrected with this patch.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index ea67c49146a3..b95231763911 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -337,10 +337,14 @@ static void report_finger_data(struct input_dev *input,
 			       const struct bcm5974_config *cfg,
 			       const struct tp_finger *f)
 {
-	input_report_abs(input, ABS_MT_TOUCH_MAJOR, raw2int(f->force_major));
-	input_report_abs(input, ABS_MT_TOUCH_MINOR, raw2int(f->force_minor));
-	input_report_abs(input, ABS_MT_WIDTH_MAJOR, raw2int(f->size_major));
-	input_report_abs(input, ABS_MT_WIDTH_MINOR, raw2int(f->size_minor));
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR,
+			 raw2int(f->force_major) << 1);
+	input_report_abs(input, ABS_MT_TOUCH_MINOR,
+			 raw2int(f->force_minor) << 1);
+	input_report_abs(input, ABS_MT_WIDTH_MAJOR,
+			 raw2int(f->size_major) << 1);
+	input_report_abs(input, ABS_MT_WIDTH_MINOR,
+			 raw2int(f->size_minor) << 1);
 	input_report_abs(input, ABS_MT_ORIENTATION,
 			 MAX_FINGER_ORIENTATION - raw2int(f->orientation));
 	input_report_abs(input, ABS_MT_POSITION_X, raw2int(f->abs_x));

From af045b86662f17bf130239a65995c61a34f00a6b Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Tue, 31 Aug 2010 17:27:02 -0700
Subject: [PATCH 061/728] Input: i8042 - fix device removal on unload

We need to call platform_device_unregister(i8042_platform_device)
before calling platform_driver_unregister() because i8042_remove()
resets i8042_platform_device to NULL. This leaves the platform device
instance behind and prevents driver reload.

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16613

Reported-by: Seryodkin Victor <vvscore@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 46e4ba0b9246..f58513160480 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -1485,8 +1485,8 @@ static int __init i8042_init(void)
 
 static void __exit i8042_exit(void)
 {
-	platform_driver_unregister(&i8042_driver);
 	platform_device_unregister(i8042_platform_device);
+	platform_driver_unregister(&i8042_driver);
 	i8042_platform_exit();
 
 	panic_blink = NULL;

From 68d3f1d810500e8b975bdf0b20dd83d060076b4b Mon Sep 17 00:00:00 2001
From: Don Zickus <dzickus@redhat.com>
Date: Tue, 31 Aug 2010 23:00:07 -0400
Subject: [PATCH 062/728] lockup_detector: Sync touch_*_watchdog back to old
 semantics

During my rewrite, the semantics of touch_nmi_watchdog and
touch_softlockup_watchdog changed enough to break some drivers
(mostly over preemptable regions).

These are cases where long delays on one CPU (due to
print_delay for example) can cause long delays on other
CPUs - so we must 'touch' the nmi_watchdog flag of those
other CPUs as well.

This change brings those touch_*_watchdog() functions back in line
with to how they used to work.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: peterz@infradead.org
Cc: fweisbec@gmail.com
LKML-Reference: <1283310009-22168-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/watchdog.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 0d53c8e853b1..7f9c3c52ecc1 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -122,7 +122,7 @@ static void __touch_watchdog(void)
 
 void touch_softlockup_watchdog(void)
 {
-	__get_cpu_var(watchdog_touch_ts) = 0;
+	__raw_get_cpu_var(watchdog_touch_ts) = 0;
 }
 EXPORT_SYMBOL(touch_softlockup_watchdog);
 
@@ -142,7 +142,14 @@ void touch_all_softlockup_watchdogs(void)
 #ifdef CONFIG_HARDLOCKUP_DETECTOR
 void touch_nmi_watchdog(void)
 {
-	__get_cpu_var(watchdog_nmi_touch) = true;
+	if (watchdog_enabled) {
+		unsigned cpu;
+
+		for_each_present_cpu(cpu) {
+			if (per_cpu(watchdog_nmi_touch, cpu) != true)
+				per_cpu(watchdog_nmi_touch, cpu) = true;
+		}
+	}
 	touch_softlockup_watchdog();
 }
 EXPORT_SYMBOL(touch_nmi_watchdog);
@@ -433,6 +440,9 @@ static int watchdog_enable(int cpu)
 		wake_up_process(p);
 	}
 
+	/* if any cpu succeeds, watchdog is considered enabled for the system */
+	watchdog_enabled = 1;
+
 	return 0;
 }
 
@@ -455,9 +465,6 @@ static void watchdog_disable(int cpu)
 		per_cpu(softlockup_watchdog, cpu) = NULL;
 		kthread_stop(p);
 	}
-
-	/* if any cpu succeeds, watchdog is considered enabled for the system */
-	watchdog_enabled = 1;
 }
 
 static void watchdog_enable_all_cpus(void)

From 25d3584797a39f57b69cd835722ac7c41113fb9a Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Mon, 16 Aug 2010 15:15:14 +0100
Subject: [PATCH 063/728] ARM: 6330/1: perf: reword comments relating to
 perf_event_do_pending

This is purely a cosmetic change to the ARM perf backend because the current
comments about the relationship between NMIs, interrupt context and
perf_event_do_pending are misleading.

This patch updates the comments so that they reflect what the code
actually does (which is in line with other architectures).

Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/perf_event.h | 2 +-
 arch/arm/kernel/perf_event.c      | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h
index 48837e6d8887..b5799a3b7117 100644
--- a/arch/arm/include/asm/perf_event.h
+++ b/arch/arm/include/asm/perf_event.h
@@ -17,7 +17,7 @@
  * counter interrupts are regular interrupts and not an NMI. This
  * means that when we receive the interrupt we can call
  * perf_event_do_pending() that handles all of the work with
- * interrupts enabled.
+ * interrupts disabled.
  */
 static inline void
 set_perf_event_pending(void)
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 417c392ddf1c..e2139256524e 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -1041,8 +1041,8 @@ armv6pmu_handle_irq(int irq_num,
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
 	perf_event_do_pending();
@@ -2017,8 +2017,8 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
 	/*
 	 * Handle the pending perf events.
 	 *
-	 * Note: this call *must* be run with interrupts enabled. For
-	 * platforms that can have the PMU interrupts raised as a PMI, this
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
 	 * will not work.
 	 */
 	perf_event_do_pending();

From 418cf646c9999f2f7d216b1a693c2c575ab8094c Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Wed, 25 Aug 2010 20:49:01 +0100
Subject: [PATCH 064/728] ARM: 6343/1: wire up fanotify and prlimit64 syscalls
 on ARM

The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This patch
wires them up on ARM.

The only non-trivial issue here is the u64 argument to
sys_fanotify_mark(), but it is the 3rd argument and thus
passed in r2/r3 in both kernel and user space, so it causes
no problems.

Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine.

Tested-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/unistd.h | 3 +++
 arch/arm/kernel/calls.S       | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index d02cfb683487..c891eb76c0e3 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -393,6 +393,9 @@
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
 #define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 #define __NR_accept4			(__NR_SYSCALL_BASE+366)
+#define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
+#define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
+#define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index afeb71fa72cb..5c26eccef998 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -376,6 +376,9 @@
 		CALL(sys_perf_event_open)
 /* 365 */	CALL(sys_recvmmsg)
 		CALL(sys_accept4)
+		CALL(sys_fanotify_init)
+		CALL(sys_fanotify_mark)
+		CALL(sys_prlimit64)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

From af54decd6a2b8efa335020afc77254355c4c1bab Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 14 Aug 2010 11:03:16 +0200
Subject: [PATCH 065/728] regulator/ab8500: move dereference below the check
 for NULL

I moved the dereference of "ab8500" below the check for NULL.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/ab8500.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index dc3f1a491675..cc7cbafc5b94 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -344,13 +344,14 @@ static inline struct ab8500_regulator_info *find_regulator_info(int id)
 static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
-	struct ab8500_platform_data *pdata = dev_get_platdata(ab8500->dev);
+	struct ab8500_platform_data *pdata;
 	int i, err;
 
 	if (!ab8500) {
 		dev_err(&pdev->dev, "null mfd parent\n");
 		return -EINVAL;
 	}
+	pdata = dev_get_platdata(ab8500->dev);
 
 	/* register all regulators */
 	for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) {

From b3fcf3e576749b911e984e752b6b390c326efb76 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 14 Aug 2010 21:31:01 +0800
Subject: [PATCH 066/728] regulator: ab3100 - fix the logic to remove already
 registered regulators in error path

In current implementation, ab3100_regulators[0].rdev is not unregistered if
the error happen at i > 0.

This patch fixes the resource leak and also improves the readability.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/ab3100.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 11790990277a..b349266a43de 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -634,12 +634,9 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 				"%s: failed to register regulator %s err %d\n",
 				__func__, ab3100_regulator_desc[i].name,
 				err);
-			i--;
 			/* remove the already registered regulators */
-			while (i > 0) {
+			while (--i >= 0)
 				regulator_unregister(ab3100_regulators[i].rdev);
-				i--;
-			}
 			return err;
 		}
 

From d4876a3bc041e8e40af20b8addbec6d0a42e3842 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 14 Aug 2010 21:44:04 +0800
Subject: [PATCH 067/728] regulator: ab8500 - fix the logic to remove already
 registered regulators in error path

In current implementation, ab8500_regulator_info[0].regulator is not
unregistered if the error happen at i > 0.

This patch fixes the resource leak and also improves the readability.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/ab8500.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index cc7cbafc5b94..3d09580dc883 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -369,11 +369,9 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "failed to register regulator %s\n",
 					info->desc.name);
 			/* when we fail, un-register all earlier regulators */
-			i--;
-			while (i > 0) {
+			while (--i >= 0) {
 				info = &ab8500_regulator_info[i];
 				regulator_unregister(info->regulator);
-				i--;
 			}
 			return err;
 		}

From 3e352f9e02a37c11df695aabfe49faebf507971b Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 18 Aug 2010 11:37:21 +0800
Subject: [PATCH 068/728] regulator: max1586 - improve the logic of choosing
 selector

A little bit improvement in the logic of choosing selector.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/max1586.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index 8867c2710a6d..559cfa271a44 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -121,14 +121,14 @@ static int max1586_v6_set(struct regulator_dev *rdev, int min_uV, int max_uV)
 	if (max_uV < MAX1586_V6_MIN_UV || max_uV > MAX1586_V6_MAX_UV)
 		return -EINVAL;
 
-	if (min_uV >= 3000000)
-		selector = 3;
-	if (min_uV < 3000000)
-		selector = 2;
-	if (min_uV < 2500000)
-		selector = 1;
 	if (min_uV < 1800000)
 		selector = 0;
+	else if (min_uV < 2500000)
+		selector = 1;
+	else if (min_uV < 3000000)
+		selector = 2;
+	else if (min_uV >= 3000000)
+		selector = 3;
 
 	if (max1586_v6_calc_voltage(selector) > max_uV)
 		return -EINVAL;

From 7112b2dfea4966c58d21b7197c3f099041248e59 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 14 Aug 2010 22:32:13 +0800
Subject: [PATCH 069/728] regulator: tps6507x - remove incorrect comments

This driver is a platform driver, not a i2c driver.
Thus remove incorrect tps6507x_remove comments.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/tps6507x-regulator.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c
index c239f42aa4a3..020f5878d7ff 100644
--- a/drivers/regulator/tps6507x-regulator.c
+++ b/drivers/regulator/tps6507x-regulator.c
@@ -626,12 +626,6 @@ fail:
 	return error;
 }
 
-/**
- * tps6507x_remove - TPS6507x driver i2c remove handler
- * @client: i2c driver client device structure
- *
- * Unregister TPS driver as an i2c client device driver
- */
 static int __devexit tps6507x_pmic_remove(struct platform_device *pdev)
 {
 	struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);

From 11fa0d1d20c7cc432c77369bc8bbfbc21030e457 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 19 Aug 2010 10:29:19 +0800
Subject: [PATCH 070/728] regulator: max8998 - fix memory allocation size for
 max8998->rdev

We only use max8998->rdev[0] .. max8998->rdev[pdata->num_regulators-1],
max8998->rdev[pdata->num_regulators] is not used.
Thus fix the memory allocation size.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/max8998.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index ab67298799f9..fbcb385034a9 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -549,7 +549,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 	if (!max8998)
 		return -ENOMEM;
 
-	size = sizeof(struct regulator_dev *) * (pdata->num_regulators + 1);
+	size = sizeof(struct regulator_dev *) * pdata->num_regulators;
 	max8998->rdev = kzalloc(size, GFP_KERNEL);
 	if (!max8998->rdev) {
 		kfree(max8998);
@@ -583,7 +583,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	for (i = 0; i <= max8998->num_regulators; i++)
+	for (i = 0; i < max8998->num_regulators; i++)
 		if (rdev[i])
 			regulator_unregister(rdev[i]);
 
@@ -599,7 +599,7 @@ static int __devexit max8998_pmic_remove(struct platform_device *pdev)
 	struct regulator_dev **rdev = max8998->rdev;
 	int i;
 
-	for (i = 0; i <= max8998->num_regulators; i++)
+	for (i = 0; i < max8998->num_regulators; i++)
 		if (rdev[i])
 			regulator_unregister(rdev[i]);
 

From c356cbc2d4d99cf5a1429603fa1841e50987c4d3 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sun, 22 Aug 2010 15:26:49 +0800
Subject: [PATCH 071/728] regulator: max8998 - set max8998->num_regulators

Set max8998->num_regulators = pdata->num_regulators,
otherwise it's default value is 0.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/max8998.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index fbcb385034a9..8b9bfdf8ffe5 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -558,6 +558,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 
 	rdev = max8998->rdev;
 	max8998->iodev = iodev;
+	max8998->num_regulators = pdata->num_regulators;
 	platform_set_drvdata(pdev, max8998);
 
 	for (i = 0; i < pdata->num_regulators; i++) {

From 327531bada36e5786b13bb6918ad8afc545adfa2 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sun, 22 Aug 2010 22:38:15 +0800
Subject: [PATCH 072/728] regulator: tps6586x-regulator - fix value range
 checking for val

val is used as array index of ri->voltages.
Thus the valid value range should be 0 .. ri->desc.n_voltages - 1.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/tps6586x-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 8cff1413a147..facd439d0f12 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -133,7 +133,7 @@ static int tps6586x_ldo_get_voltage(struct regulator_dev *rdev)
 	mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
 	val = (val & mask) >> ri->volt_shift;
 
-	if (val > ri->desc.n_voltages)
+	if (val >= ri->desc.n_voltages)
 		BUG();
 
 	return ri->voltages[val] * 1000;

From 938b45927c240cf75a01ce29af3f173762e762f8 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sun, 22 Aug 2010 22:42:42 +0800
Subject: [PATCH 073/728] regulator: tps6586x-regulator - fix bit_mask
 parameter for tps6586x_set_bits()

The third parameter of tps6586x_set_bits() is the bit_mask,
thus we should use (1 << ri->go_bit) instead of ri->go_bit.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/tps6586x-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index facd439d0f12..51237fbb1bbb 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -150,7 +150,7 @@ static int tps6586x_dvm_set_voltage(struct regulator_dev *rdev,
 	if (ret)
 		return ret;
 
-	return tps6586x_set_bits(parent, ri->go_reg, ri->go_bit);
+	return tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
 }
 
 static int tps6586x_regulator_enable(struct regulator_dev *rdev)

From 747cc851dc42ffeac2872da066ca4293a6d90baf Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 27 Aug 2010 16:37:34 +0800
Subject: [PATCH 074/728] regulator: set max8998->dev to &pdev->dev.

max8998->dev is NULL in current implementation, set it to &pdev->dev.

regulator_register() still return success if max8998->dev is NULL,
but rdev->dev.parent will be set to NULL which is incorrect.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/max8998.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index 8b9bfdf8ffe5..a1baf1fbe004 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -557,6 +557,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev)
 	}
 
 	rdev = max8998->rdev;
+	max8998->dev = &pdev->dev;
 	max8998->iodev = iodev;
 	max8998->num_regulators = pdata->num_regulators;
 	platform_set_drvdata(pdev, max8998);

From 606b2f490fb80e55d05cf0e6cec0b6c0ff0fc18f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Fri, 27 Aug 2010 22:33:38 +0100
Subject: [PATCH 075/728] regulator: Update e-mail address for Liam Girdwood

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 Documentation/power/regulator/overview.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt
index 9363e056188a..8ed17587a74b 100644
--- a/Documentation/power/regulator/overview.txt
+++ b/Documentation/power/regulator/overview.txt
@@ -13,7 +13,7 @@ regulators (where voltage output is controllable) and current sinks (where
 current limit is controllable).
 
 (C) 2008  Wolfson Microelectronics PLC.
-Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+Author: Liam Girdwood <lrg@slimlogic.co.uk>
 
 
 Nomenclature

From 58d463eec844f6381d63d04dc89d319ae3057ca9 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 1 Sep 2010 10:29:18 +0800
Subject: [PATCH 076/728] regulator: ad5398 - fix a memory leak

In current implementation, the address return from regulator_register()
is different from the address for regulator_unregister().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/ad5398.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c
index d59d2f2314af..df1fb53c09d2 100644
--- a/drivers/regulator/ad5398.c
+++ b/drivers/regulator/ad5398.c
@@ -25,7 +25,7 @@ struct ad5398_chip_info {
 	unsigned int current_level;
 	unsigned int current_mask;
 	unsigned int current_offset;
-	struct regulator_dev rdev;
+	struct regulator_dev *rdev;
 };
 
 static int ad5398_calc_current(struct ad5398_chip_info *chip,
@@ -211,7 +211,6 @@ MODULE_DEVICE_TABLE(i2c, ad5398_id);
 static int __devinit ad5398_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
-	struct regulator_dev *rdev;
 	struct regulator_init_data *init_data = client->dev.platform_data;
 	struct ad5398_chip_info *chip;
 	const struct ad5398_current_data_format *df =
@@ -233,9 +232,10 @@ static int __devinit ad5398_probe(struct i2c_client *client,
 	chip->current_offset = df->current_offset;
 	chip->current_mask = (chip->current_level - 1) << chip->current_offset;
 
-	rdev = regulator_register(&ad5398_reg, &client->dev, init_data, chip);
-	if (IS_ERR(rdev)) {
-		ret = PTR_ERR(rdev);
+	chip->rdev = regulator_register(&ad5398_reg, &client->dev,
+					init_data, chip);
+	if (IS_ERR(chip->rdev)) {
+		ret = PTR_ERR(chip->rdev);
 		dev_err(&client->dev, "failed to register %s %s\n",
 			id->name, ad5398_reg.name);
 		goto err;
@@ -254,7 +254,7 @@ static int __devexit ad5398_remove(struct i2c_client *client)
 {
 	struct ad5398_chip_info *chip = i2c_get_clientdata(client);
 
-	regulator_unregister(&chip->rdev);
+	regulator_unregister(chip->rdev);
 	kfree(chip);
 	i2c_set_clientdata(client, NULL);
 

From b9e5d11a7e70000ace3ba92100bf1e81ff607604 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 1 Sep 2010 13:09:41 +0800
Subject: [PATCH 077/728] regulator: isl6271a-regulator - fix regulator_desc
 parameter for regulator_register()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/isl6271a-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c
index e49d2bd393f2..d61ecb885a8c 100644
--- a/drivers/regulator/isl6271a-regulator.c
+++ b/drivers/regulator/isl6271a-regulator.c
@@ -165,7 +165,7 @@ static int __devinit isl6271a_probe(struct i2c_client *i2c,
 	mutex_init(&pmic->mtx);
 
 	for (i = 0; i < 3; i++) {
-		pmic->rdev[i] = regulator_register(&isl_rd[0], &i2c->dev,
+		pmic->rdev[i] = regulator_register(&isl_rd[i], &i2c->dev,
 						init_data, pmic);
 		if (IS_ERR(pmic->rdev[i])) {
 			dev_err(&i2c->dev, "failed to register %s\n", id->name);

From cc0fc0bbeb17dd33ed7bfea58d0178e9c007ff67 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 1 Sep 2010 08:55:22 -0600
Subject: [PATCH 078/728] spi/spi_s3c64xx: Make probe more robust against
 missing board config

The S3C64xx SPI driver requires the machine to call s3c64xx_spi_set_info()
to select a few options, including the clock to use for the SPI controller.
If this is not done then a NULL will be passed as the clock name for
clk_get(), causing an obscure crash. Guard against this and other missing
configuration by validating that the clock name has been filled in in
the platform data that ets passed in.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 97365815a729..a0b63b785418 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -919,6 +919,13 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	sci = pdev->dev.platform_data;
+	if (!sci->src_clk_name) {
+		dev_err(&pdev->dev,
+			"Board init must call s3c64xx_spi_set_info()\n");
+		return -EINVAL;
+	}
+
 	/* Check for availability of necessary resource */
 
 	dmatx_res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -946,8 +953,6 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	sci = pdev->dev.platform_data;
-
 	platform_set_drvdata(pdev, master);
 
 	sdd = spi_master_get_devdata(master);

From 8944f4f3d9695e04f7091ab61da9aab7a4be5846 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 1 Sep 2010 08:55:23 -0600
Subject: [PATCH 079/728] spi/spi_s3c64xx: Staticise non-exported functions

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index a0b63b785418..7e627f73bc6c 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -447,8 +447,8 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 	writel(val, regs + S3C64XX_SPI_CLK_CFG);
 }
 
-void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				int size, enum s3c2410_dma_buffresult res)
+static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
+				 int size, enum s3c2410_dma_buffresult res)
 {
 	struct s3c64xx_spi_driver_data *sdd = buf_id;
 	unsigned long flags;
@@ -467,8 +467,8 @@ void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id,
 	spin_unlock_irqrestore(&sdd->lock, flags);
 }
 
-void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
-				int size, enum s3c2410_dma_buffresult res)
+static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id,
+				 int size, enum s3c2410_dma_buffresult res)
 {
 	struct s3c64xx_spi_driver_data *sdd = buf_id;
 	unsigned long flags;

From 9f1a1fca35066117353994bff80a5115cddad7a2 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 1 Sep 2010 08:55:23 -0600
Subject: [PATCH 080/728] of: Fix missing includes - ll_temac

It is the next patch which is fixing missing header
which were removed from prom.h.

Related patches:
"of/address: Clean up function declarations" (sha1 id 22ae782f8)
"of: Fix missing includes" (sha1 id f1ca09b2b)

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/net/ll_temac_main.c | 1 +
 drivers/net/ll_temac_mdio.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index bdf2149e5296..87f0a93b165c 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -38,6 +38,7 @@
 #include <linux/of_device.h>
 #include <linux/of_mdio.h>
 #include <linux/of_platform.h>
+#include <linux/of_address.h>
 #include <linux/skbuff.h>
 #include <linux/spinlock.h>
 #include <linux/tcp.h>      /* needed for sizeof(tcphdr) */
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ll_temac_mdio.c
index 5ae28c975b38..8cf9d4f56bb2 100644
--- a/drivers/net/ll_temac_mdio.c
+++ b/drivers/net/ll_temac_mdio.c
@@ -10,6 +10,7 @@
 #include <linux/phy.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/of_mdio.h>
 

From 4e4438b86527e8bf1f49503a30d487e401e64f9c Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <cbouatmailru@gmail.com>
Date: Wed, 1 Sep 2010 08:55:24 -0600
Subject: [PATCH 081/728] gpiolib: Add 'struct gpio_chip' forward declaration
 for !GPIOLIB case

With CONFIG_GPIOLIB=n, the 'struct gpio_chip' is not declared,
so the following pops up on PowerPC:

  cc1: warnings being treated as errors
  In file included from arch/powerpc/platforms/52xx/mpc52xx_common.c:19:
  include/linux/of_gpio.h:74: warning: 'struct gpio_chip' declared
                              inside parameter list
  include/linux/of_gpio.h:74: warning: its scope is only this definition
                              or declaration, which is probably not what
			      you want
  include/linux/of_gpio.h:75: warning: 'struct gpio_chip' declared
                              inside parameter list
  make[2]: *** [arch/powerpc/platforms/52xx/mpc52xx_common.o] Error 1

This patch fixes the issue by providing the proper forward declaration.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 include/linux/gpio.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 03f616b78cfa..e41f7dd1ae67 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -13,6 +13,7 @@
 #include <linux/errno.h>
 
 struct device;
+struct gpio_chip;
 
 /*
  * Some platforms don't support the GPIO programming interface.

From 34860089c9e8abcc77428d29743b37ff756197e7 Mon Sep 17 00:00:00 2001
From: David Lamparter <equinox@diac24.net>
Date: Mon, 30 Aug 2010 23:54:17 +0200
Subject: [PATCH 082/728] spi: free children in spi_unregister_master, not
 siblings

introduced by 49dce689 ("spi doesn't need class_device") and bad-fixed
by 350d0076 ("spi: fix double-free on spi_unregister_master"),
spi_unregister_master would previously device_unregister all of the spi
master's siblings (instead of its children). hilarity ensues.

fix it to unregister children.

Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index a9e5c79ae52a..0bcf4c1601a2 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -554,11 +554,9 @@ done:
 EXPORT_SYMBOL_GPL(spi_register_master);
 
 
-static int __unregister(struct device *dev, void *master_dev)
+static int __unregister(struct device *dev, void *null)
 {
-	/* note: before about 2.6.14-rc1 this would corrupt memory: */
-	if (dev != master_dev)
-		spi_unregister_device(to_spi_device(dev));
+	spi_unregister_device(to_spi_device(dev));
 	return 0;
 }
 
@@ -576,8 +574,7 @@ void spi_unregister_master(struct spi_master *master)
 {
 	int dummy;
 
-	dummy = device_for_each_child(master->dev.parent, &master->dev,
-					__unregister);
+	dummy = device_for_each_child(&master->dev, NULL, __unregister);
 	device_unregister(&master->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_master);

From 59482fe5959675f180469ae95e4fcd0a15920ced Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Tue, 31 Aug 2010 17:43:51 +0900
Subject: [PATCH 083/728] powerpc/512x: fix clk_get() return value

clk_get() should return an ERR_PTR value on error, not NULL.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/512x/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index 5b243bd3eb3b..3dc2a8d262b8 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -57,7 +57,7 @@ static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
 	int id_match = 0;
 
 	if (dev == NULL || id == NULL)
-		return NULL;
+		return clk;
 
 	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {

From 269f45c25028c75fe10e6d9be86e7202ab461fbc Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 1 Sep 2010 14:50:50 +0200
Subject: [PATCH 084/728] oprofile, x86: fix init_sysfs() function stub
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The use of the return value of init_sysfs() with commit

 10f0412 oprofile, x86: fix init_sysfs error handling

discovered the following build error for !CONFIG_PM:

 .../linux/arch/x86/oprofile/nmi_int.c: In function ‘op_nmi_init’:
 .../linux/arch/x86/oprofile/nmi_int.c:784: error: expected expression before ‘do’
 make[2]: *** [arch/x86/oprofile/nmi_int.o] Error 1
 make[1]: *** [arch/x86/oprofile] Error 2

This patch fixes this.

Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 73a41d3c6c09..cfe4faabb0f6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -585,8 +585,10 @@ static void exit_sysfs(void)
 }
 
 #else
-#define init_sysfs() do { } while (0)
-#define exit_sysfs() do { } while (0)
+
+static inline int  init_sysfs(void) { return 0; }
+static inline void exit_sysfs(void) { }
+
 #endif /* CONFIG_PM */
 
 static int __init p4_init(char **cpu_type)

From 048e78a5bc22c27410cb5ca9680c3c7ac400607f Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Thu, 2 Sep 2010 08:35:47 +0200
Subject: [PATCH 085/728] ALSA: hda - Add a new hp-laptop model for Conexant
 5066, tested on HP G60

This new model adds the following functionality to HP G60:
- Automute of internal speakers
- Autoswitch of internal/external mics
- Remove SPDIF not physically present

BugLink: http://launchpad.net/bugs/587388
Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 Documentation/sound/alsa/HD-Audio-Models.txt |  1 +
 sound/pci/hda/patch_conexant.c               | 57 ++++++++++++++++++++
 2 files changed, 58 insertions(+)

diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index ce46fa1e643e..37c6aad5e590 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -296,6 +296,7 @@ Conexant 5051
 Conexant 5066
 =============
   laptop	Basic Laptop config (default)
+  hp-laptop	HP laptops, e g G60
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 5cdb80edbd7f..4f0619908a30 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -116,6 +116,7 @@ struct conexant_spec {
 	unsigned int dell_vostro:1;
 	unsigned int ideapad:1;
 	unsigned int thinkpad:1;
+	unsigned int hp_laptop:1;
 
 	unsigned int ext_mic_present;
 	unsigned int recording;
@@ -2299,6 +2300,18 @@ static void cxt5066_ideapad_automic(struct hda_codec *codec)
 	}
 }
 
+/* toggle input of built-in digital mic and mic jack appropriately */
+static void cxt5066_hp_laptop_automic(struct hda_codec *codec)
+{
+	unsigned int present;
+
+	present = snd_hda_jack_detect(codec, 0x1b);
+	snd_printdd("CXT5066: external microphone present=%d\n", present);
+	snd_hda_codec_write(codec, 0x17, 0, AC_VERB_SET_CONNECT_SEL,
+			    present ? 1 : 3);
+}
+
+
 /* toggle input of built-in digital mic and mic jack appropriately
    order is: external mic -> dock mic -> interal mic */
 static void cxt5066_thinkpad_automic(struct hda_codec *codec)
@@ -2407,6 +2420,20 @@ static void cxt5066_ideapad_event(struct hda_codec *codec, unsigned int res)
 	}
 }
 
+/* unsolicited event for jack sensing */
+static void cxt5066_hp_laptop_event(struct hda_codec *codec, unsigned int res)
+{
+	snd_printdd("CXT5066_hp_laptop: unsol event %x (%x)\n", res, res >> 26);
+	switch (res >> 26) {
+	case CONEXANT_HP_EVENT:
+		cxt5066_hp_automute(codec);
+		break;
+	case CONEXANT_MIC_EVENT:
+		cxt5066_hp_laptop_automic(codec);
+		break;
+	}
+}
+
 /* unsolicited event for jack sensing */
 static void cxt5066_thinkpad_event(struct hda_codec *codec, unsigned int res)
 {
@@ -2989,6 +3016,14 @@ static struct hda_verb cxt5066_init_verbs_portd_lo[] = {
 	{ } /* end */
 };
 
+
+static struct hda_verb cxt5066_init_verbs_hp_laptop[] = {
+	{0x14, AC_VERB_SET_CONNECT_SEL, 0x0},
+	{0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_HP_EVENT},
+	{0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | CONEXANT_MIC_EVENT},
+	{ } /* end */
+};
+
 /* initialize jack-sensing, too */
 static int cxt5066_init(struct hda_codec *codec)
 {
@@ -3004,6 +3039,8 @@ static int cxt5066_init(struct hda_codec *codec)
 			cxt5066_ideapad_automic(codec);
 		else if (spec->thinkpad)
 			cxt5066_thinkpad_automic(codec);
+		else if (spec->hp_laptop)
+			cxt5066_hp_laptop_automic(codec);
 	}
 	cxt5066_set_mic_boost(codec);
 	return 0;
@@ -3031,6 +3068,7 @@ enum {
 	CXT5066_DELL_VOSTO,	/* Dell Vostro 1015i */
 	CXT5066_IDEAPAD,	/* Lenovo IdeaPad U150 */
 	CXT5066_THINKPAD,	/* Lenovo ThinkPad T410s, others? */
+	CXT5066_HP_LAPTOP,      /* HP Laptop */
 	CXT5066_MODELS
 };
 
@@ -3041,6 +3079,7 @@ static const char *cxt5066_models[CXT5066_MODELS] = {
 	[CXT5066_DELL_VOSTO]    = "dell-vostro",
 	[CXT5066_IDEAPAD]	= "ideapad",
 	[CXT5066_THINKPAD]	= "thinkpad",
+	[CXT5066_HP_LAPTOP]	= "hp-laptop",
 };
 
 static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
@@ -3052,6 +3091,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTO),
 	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
 	SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
@@ -3116,6 +3156,23 @@ static int patch_cxt5066(struct hda_codec *codec)
 		spec->num_init_verbs++;
 		spec->dell_automute = 1;
 		break;
+	case CXT5066_HP_LAPTOP:
+		codec->patch_ops.init = cxt5066_init;
+		codec->patch_ops.unsol_event = cxt5066_hp_laptop_event;
+		spec->init_verbs[spec->num_init_verbs] =
+			cxt5066_init_verbs_hp_laptop;
+		spec->num_init_verbs++;
+		spec->hp_laptop = 1;
+		spec->mixers[spec->num_mixers++] = cxt5066_mixer_master;
+		spec->mixers[spec->num_mixers++] = cxt5066_mixers;
+		/* no S/PDIF out */
+		spec->multiout.dig_out_nid = 0;
+		/* input source automatically selected */
+		spec->input_mux = NULL;
+		spec->port_d_mode = 0;
+		spec->mic_boost = 3; /* default 30dB gain */
+		break;
+
 	case CXT5066_OLPC_XO_1_5:
 		codec->patch_ops.init = cxt5066_olpc_init;
 		codec->patch_ops.unsol_event = cxt5066_olpc_unsol_event;

From 7b6717e144de6592e614fd7fc3b914b6bf686a9d Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 2 Sep 2010 17:13:15 +0800
Subject: [PATCH 086/728] ALSA: usb-audio: Assume first control interface is
 for audio

For devices with more than one control interface, let's assume the first
one contains the audio controls. Unfortunately, there is no field in any
of the descriptors to tell us whether a control interface is for audio
or MIDI controls, so a better check is not easy to implement.

On a composite device with audio and MIDI functions, for example, the
code currently overwrites chip->ctrl_intf, causing operations on the
control interface to fail if they are issued after the device probe.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/card.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 9feb00c831a0..b443a33d31c9 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -465,7 +465,13 @@ static void *snd_usb_audio_probe(struct usb_device *dev,
 			goto __error;
 	}
 
-	chip->ctrl_intf = alts;
+	/*
+	 * For devices with more than one control interface, we assume the
+	 * first contains the audio controls. We might need a more specific
+	 * check here in the future.
+	 */
+	if (!chip->ctrl_intf)
+		chip->ctrl_intf = alts;
 
 	if (err > 0) {
 		/* create normal USB audio interfaces */

From 026b5ca3b65f878019a8eb0c7a702cd5c20a4104 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 1 Sep 2010 14:33:29 +0100
Subject: [PATCH 087/728] ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 33c3f570aaa0..a0a2928ae4dd 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -398,7 +398,7 @@ config CPU_V6
 # ARMv6k
 config CPU_32v6K
 	bool "Support ARM V6K processor extensions" if !SMP
-	depends on CPU_V6
+	depends on CPU_V6 || CPU_V7
 	default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
 	help
 	  Say Y here if your ARMv6 processor supports the 'K' extension.

From 65b4711ff513767341aa1915c822de6ec0de65cb Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Thu, 2 Sep 2010 09:32:08 +0100
Subject: [PATCH 088/728] ARM: 6352/1: perf: fix event validation

The validate_event function in the ARM perf events backend has the
following problems:

1.) Events that are disabled count towards the cost.
2.) Events associated with other PMUs [for example, software events or
    breakpoints] do not count towards the cost, but do fail validation,
    causing the group to fail.

This patch changes validate_event so that it ignores events in the
PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs.

Reported-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Jamie Iles <jamie.iles@picochip.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/perf_event.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e2139256524e..ecbb0288e5dd 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -319,8 +319,8 @@ validate_event(struct cpu_hw_events *cpuc,
 {
 	struct hw_perf_event fake_event = event->hw;
 
-	if (event->pmu && event->pmu != &pmu)
-		return 0;
+	if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+		return 1;
 
 	return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
 }

From 8f34a430ac16d5fbd9d6b383184d35e152f5a963 Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Thu, 2 Sep 2010 15:23:16 -0400
Subject: [PATCH 089/728] nfsd4: mask out non-access bits in
 nfs4_access_to_omode

This fixes an unnecessary BUG().

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
---
 fs/nfsd/nfs4state.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 3dfef0623968..cf0d2ffb3c84 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -440,7 +440,7 @@ test_share(struct nfs4_stateid *stp, struct nfsd4_open *open) {
 
 static int nfs4_access_to_omode(u32 access)
 {
-	switch (access) {
+	switch (access & NFS4_SHARE_ACCESS_BOTH) {
 	case NFS4_SHARE_ACCESS_READ:
 		return O_RDONLY;
 	case NFS4_SHARE_ACCESS_WRITE:

From d842a93c4b3a20d31f4fb97357e0964210d6066f Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 12 Aug 2010 14:31:05 +0200
Subject: [PATCH 090/728] [SCSI] fix bio.bi_rw handling

Return of the bi_rw tests is no longer bool after commit 74450be1. So
testing against constants doesn't make sense anymore. Fix this bug in
osd_req_read by removing "== 1" in test.

This is not a problem now, where REQ_WRITE is 1, but this can change
in the future and we don't want to rely on that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/osd/osd_initiator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index fda4de3440c4..e88bbdde49c5 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -865,7 +865,7 @@ void osd_req_read(struct osd_request *or,
 {
 	_osd_req_encode_common(or, OSD_ACT_READ, obj, offset, len);
 	WARN_ON(or->in.bio || or->in.total_bytes);
-	WARN_ON(1 == (bio->bi_rw & REQ_WRITE));
+	WARN_ON(bio->bi_rw & REQ_WRITE);
 	or->in.bio = bio;
 	or->in.total_bytes = len;
 }

From b15d05b0d358cedf9c4d420a60d2ee2d0f530788 Mon Sep 17 00:00:00 2001
From: Jayamohan Kallickal <jayamohank@serverengines.com>
Date: Thu, 12 Aug 2010 23:36:06 +0530
Subject: [PATCH 091/728] [SCSI] be2iscsi: Fix for Login failure

The current code in tree has problems with Login.
This patch fixes the Login Failure .

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
[mnc: Can't believe I missed that.]
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/be2iscsi/be_iscsi.c | 5 ++---
 drivers/scsi/be2iscsi/be_mgmt.c  | 2 +-
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index 7d4d2275573c..7f11f3e48e12 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -300,8 +300,7 @@ int beiscsi_get_host_param(struct Scsi_Host *shost,
 			   enum iscsi_host_param param, char *buf)
 {
 	struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
-	int len = 0;
-	int status;
+	int status = 0;
 
 	SE_DEBUG(DBG_LVL_8, "In beiscsi_get_host_param, param= %d\n", param);
 	switch (param) {
@@ -315,7 +314,7 @@ int beiscsi_get_host_param(struct Scsi_Host *shost,
 	default:
 		return iscsi_host_get_param(shost, param, buf);
 	}
-	return len;
+	return status;
 }
 
 int beiscsi_get_macaddr(char *buf, struct beiscsi_hba *phba)
diff --git a/drivers/scsi/be2iscsi/be_mgmt.c b/drivers/scsi/be2iscsi/be_mgmt.c
index 26350e470bcc..877324fc594c 100644
--- a/drivers/scsi/be2iscsi/be_mgmt.c
+++ b/drivers/scsi/be2iscsi/be_mgmt.c
@@ -368,7 +368,7 @@ int mgmt_open_connection(struct beiscsi_hba *phba,
 	memset(req, 0, sizeof(*req));
 	wrb->tag0 |= tag;
 
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 1);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
 	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
 			   OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD,
 			   sizeof(*req));

From 36ed2176fedaa180b8ea3cdacf68c958e0090a3c Mon Sep 17 00:00:00 2001
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
Date: Wed, 25 Aug 2010 10:44:14 -0500
Subject: [PATCH 092/728] [SCSI] hpsa: disable doorbell reset on reset_devices

The doorbell reset initially appears to work correctly,
the controller resets, comes up, some i/o can even be
done, but on at least some Smart Arrays in some servers,
it eventually causes a subsequent controller lockup due
to some kind of PCIe error, and kdump can end up leaving
the root filesystem in an unbootable state.  For this
reason, until the problem is fixed, or at least isolated
to certain hardware enough to be avoided, the doorbell
reset should not be used at all.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/hpsa.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 4f5551b5fe53..c5d0606ad097 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3231,6 +3231,12 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	misc_fw_support = readl(&cfgtable->misc_fw_support);
 	use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
 
+	/* The doorbell reset seems to cause lockups on some Smart
+	 * Arrays (e.g. P410, P410i, maybe others).  Until this is
+	 * fixed or at least isolated, avoid the doorbell reset.
+	 */
+	use_doorbell = 0;
+
 	rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
 	if (rc)
 		goto unmap_cfgtable;

From 6f131ce1dfa9b283ddc212df42b015d152c670a5 Mon Sep 17 00:00:00 2001
From: Jean Sacren <sakiwit@gmail.com>
Date: Wed, 25 Aug 2010 17:58:09 -0600
Subject: [PATCH 093/728] [SCSI] Fix warning: zero-length gnu_printf format
 string

warning: zero-length gnu_printf format string

Fix the above warning by inserting a space into the literal string.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/constants.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/constants.c b/drivers/scsi/constants.c
index cd05e049d5f6..d0c82340f0e2 100644
--- a/drivers/scsi/constants.c
+++ b/drivers/scsi/constants.c
@@ -1404,13 +1404,13 @@ void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
 {
 	struct scsi_sense_hdr sshdr;
 
-	scmd_printk(KERN_INFO, cmd, "");
+	scmd_printk(KERN_INFO, cmd, " ");
 	scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
 				 &sshdr);
 	scsi_show_sense_hdr(&sshdr);
 	scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
 				 &sshdr);
-	scmd_printk(KERN_INFO, cmd, "");
+	scmd_printk(KERN_INFO, cmd, " ");
 	scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
 }
 EXPORT_SYMBOL(scsi_print_sense);
@@ -1453,7 +1453,7 @@ EXPORT_SYMBOL(scsi_show_result);
 
 void scsi_print_result(struct scsi_cmnd *cmd)
 {
-	scmd_printk(KERN_INFO, cmd, "");
+	scmd_printk(KERN_INFO, cmd, " ");
 	scsi_show_result(cmd->result);
 }
 EXPORT_SYMBOL(scsi_print_result);

From 2e4c332913b5d39fef686b3964098f0d8fd97ead Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Tue, 31 Aug 2010 13:35:31 -0700
Subject: [PATCH 094/728] [SCSI] sd, sym53c8xx: Remove warnings after vsprintf
 %pV introducation.

GCC warns about empty printf format strings, and after
the addition of %pV these existing such cases in the
scsi driver layer were exposed enough for the compiler
to start seeing them.

Based almost entirely upon a patch by Joe Perches.

[jejb: fix up sym53c8xx msg]
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/sd.c                   |  6 +++---
 drivers/scsi/sym53c8xx_2/sym_hipd.c | 10 ++++------
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 2714becc2eaf..cd71f46a3d47 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2625,15 +2625,15 @@ module_exit(exit_sd);
 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
 			       struct scsi_sense_hdr *sshdr)
 {
-	sd_printk(KERN_INFO, sdkp, "");
+	sd_printk(KERN_INFO, sdkp, " ");
 	scsi_show_sense_hdr(sshdr);
-	sd_printk(KERN_INFO, sdkp, "");
+	sd_printk(KERN_INFO, sdkp, " ");
 	scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
 }
 
 static void sd_print_result(struct scsi_disk *sdkp, int result)
 {
-	sd_printk(KERN_INFO, sdkp, "");
+	sd_printk(KERN_INFO, sdkp, " ");
 	scsi_show_result(result);
 }
 
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index a7bc8b7b09ac..2c3e89ddf069 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -72,10 +72,7 @@ static void sym_printl_hex(u_char *p, int n)
 
 static void sym_print_msg(struct sym_ccb *cp, char *label, u_char *msg)
 {
-	if (label)
-		sym_print_addr(cp->cmd, "%s: ", label);
-	else
-		sym_print_addr(cp->cmd, "");
+	sym_print_addr(cp->cmd, "%s: ", label);
 
 	spi_print_msg(msg);
 	printf("\n");
@@ -4558,7 +4555,8 @@ static void sym_int_sir(struct sym_hcb *np)
 			switch (np->msgin [2]) {
 			case M_X_MODIFY_DP:
 				if (DEBUG_FLAGS & DEBUG_POINTER)
-					sym_print_msg(cp, NULL, np->msgin);
+					sym_print_msg(cp, "extended msg ",
+						      np->msgin);
 				tmp = (np->msgin[3]<<24) + (np->msgin[4]<<16) + 
 				      (np->msgin[5]<<8)  + (np->msgin[6]);
 				sym_modify_dp(np, tp, cp, tmp);
@@ -4585,7 +4583,7 @@ static void sym_int_sir(struct sym_hcb *np)
 		 */
 		case M_IGN_RESIDUE:
 			if (DEBUG_FLAGS & DEBUG_POINTER)
-				sym_print_msg(cp, NULL, np->msgin);
+				sym_print_msg(cp, "1 or 2 byte ", np->msgin);
 			if (cp->host_flags & HF_SENSE)
 				OUTL_DSP(np, SCRIPTA_BA(np, clrack));
 			else

From dc4e96ce2dceb649224ee84f83592aac8c54c9b7 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Sat, 28 Aug 2010 13:35:05 +0000
Subject: [PATCH 095/728] RDMA/cxgb3: Don't exceed the max HW CQ depth

The max depth supported by T3 is 64K entries.  This fixes a bug
introduced in commit 9918b28d ("RDMA/cxgb3: Increase the max CQ
depth") that causes stalls and possibly crashes in large MPI clusters.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/cxio_hal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.h b/drivers/infiniband/hw/cxgb3/cxio_hal.h
index 8f0caf7d4482..78fbe9ffe7f0 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.h
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.h
@@ -53,7 +53,7 @@
 #define T3_MAX_PBL_SIZE 256
 #define T3_MAX_RQ_SIZE 1024
 #define T3_MAX_QP_DEPTH (T3_MAX_RQ_SIZE-1)
-#define T3_MAX_CQ_DEPTH 262144
+#define T3_MAX_CQ_DEPTH 65536
 #define T3_MAX_NUM_STAG (1<<15)
 #define T3_MAX_MR_SIZE 0x100000000ULL
 #define T3_PAGESIZE_MASK 0xffff000  /* 4KB-128MB */

From 2e556b5b320838fde98480a1f6cf220a5af200fc Mon Sep 17 00:00:00 2001
From: Don Zickus <dzickus@redhat.com>
Date: Thu, 2 Sep 2010 15:07:47 -0400
Subject: [PATCH 096/728] perf, x86: Fix accidentally ack'ing a second event on
 intel perf counter

During testing of a patch to stop having the perf subsytem
swallow nmis, it was uncovered that Nehalem boxes were randomly
getting unknown nmis when using the perf tool.

Moving the ack'ing of the PMI closer to when we get the status
allows the hardware to properly re-set the PMU bit signaling
another PMI was triggered during the processing of the first
PMI.  This allows the new logic for dealing with the
shortcomings of multiple PMIs to handle the extra NMI by
'eat'ing it later.

Now one can wonder why are we getting a second PMI when we
disable all the PMUs in the begining of the NMI handler to
prevent such a case, for that I do not know.  But I know the fix
below helps deal with this quirk.

Tested on multiple Nehalems where the problem was occuring.
With the patch, the code now loops a second time to handle the
second PMI (whereas before it was not).

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: robert.richter@amd.com
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
Cc: ying.huang@intel.com
Cc: ming.m.lin@intel.com
Cc: eranian@google.com
LKML-Reference: <1283454469-1909-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event_intel.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index d8d86d014008..1297bf15cb88 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -712,7 +712,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	struct perf_sample_data data;
 	struct cpu_hw_events *cpuc;
 	int bit, loops;
-	u64 ack, status;
+	u64 status;
 
 	perf_sample_data_init(&data, 0);
 
@@ -728,6 +728,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 
 	loops = 0;
 again:
+	intel_pmu_ack_status(status);
 	if (++loops > 100) {
 		WARN_ONCE(1, "perfevents: irq loop stuck!\n");
 		perf_event_print_debug();
@@ -736,7 +737,6 @@ again:
 	}
 
 	inc_irq_stat(apic_perf_irqs);
-	ack = status;
 
 	intel_pmu_lbr_read();
 
@@ -761,8 +761,6 @@ again:
 			x86_pmu_stop(event);
 	}
 
-	intel_pmu_ack_status(ack);
-
 	/*
 	 * Repeat if there is more work to be done:
 	 */

From de725dec9de7a7541996176d59cf8542365b8b0e Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 2 Sep 2010 15:07:49 -0400
Subject: [PATCH 097/728] perf, x86: Fix handle_irq return values

Now that we rely on the number of handled overflows, ensure all
handle_irq implementations actually return the right number.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: robert.richter@amd.com
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
Cc: ying.huang@intel.com
Cc: ming.m.lin@intel.com
Cc: eranian@google.com
LKML-Reference: <1283454469-1909-4-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event_intel.c | 9 +++++++--
 arch/x86/kernel/cpu/perf_event_p4.c    | 2 +-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index 1297bf15cb88..ee05c90012d2 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -713,6 +713,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	struct cpu_hw_events *cpuc;
 	int bit, loops;
 	u64 status;
+	int handled = 0;
 
 	perf_sample_data_init(&data, 0);
 
@@ -743,12 +744,16 @@ again:
 	/*
 	 * PEBS overflow sets bit 62 in the global status register
 	 */
-	if (__test_and_clear_bit(62, (unsigned long *)&status))
+	if (__test_and_clear_bit(62, (unsigned long *)&status)) {
+		handled++;
 		x86_pmu.drain_pebs(regs);
+	}
 
 	for_each_set_bit(bit, (unsigned long *)&status, X86_PMC_IDX_MAX) {
 		struct perf_event *event = cpuc->events[bit];
 
+		handled++;
+
 		if (!test_bit(bit, cpuc->active_mask))
 			continue;
 
@@ -770,7 +775,7 @@ again:
 
 done:
 	intel_pmu_enable_all(0);
-	return 1;
+	return handled;
 }
 
 static struct event_constraint *
diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index 7e578e9cc58b..b560db3305be 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -692,7 +692,7 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 		inc_irq_stat(apic_perf_irqs);
 	}
 
-	return handled > 0;
+	return handled;
 }
 
 /*

From 4177c42a6301a34c20038ec2771a33dcc30bb338 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 2 Sep 2010 15:07:48 -0400
Subject: [PATCH 098/728] perf, x86: Try to handle unknown nmis with an enabled
 PMU

When the PMU is enabled it is valid to have unhandled nmis, two
events could trigger 'simultaneously' raising two back-to-back
NMIs. If the first NMI handles both, the latter will be empty
and daze the CPU.

The solution to avoid an 'unknown nmi' massage in this case was
simply to stop the nmi handler chain when the PMU is enabled by
stating the nmi was handled. This has the drawback that a) we
can not detect unknown nmis anymore, and b) subsequent nmi
handlers are not called.

This patch addresses this. Now, we check this unknown NMI if it
could be a PMU back-to-back NMI. Otherwise we pass it and let
the kernel handle the unknown nmi.

This is a debug log:

 cpu #6, nmi #32333, skip_nmi #32330, handled = 1, time = 1934364430
 cpu #6, nmi #32334, skip_nmi #32330, handled = 1, time = 1934704616
 cpu #6, nmi #32335, skip_nmi #32336, handled = 2, time = 1936032320
 cpu #6, nmi #32336, skip_nmi #32336, handled = 0, time = 1936034139
 cpu #6, nmi #32337, skip_nmi #32336, handled = 1, time = 1936120100
 cpu #6, nmi #32338, skip_nmi #32336, handled = 1, time = 1936404607
 cpu #6, nmi #32339, skip_nmi #32336, handled = 1, time = 1937983416
 cpu #6, nmi #32340, skip_nmi #32341, handled = 2, time = 1938201032
 cpu #6, nmi #32341, skip_nmi #32341, handled = 0, time = 1938202830
 cpu #6, nmi #32342, skip_nmi #32341, handled = 1, time = 1938443743
 cpu #6, nmi #32343, skip_nmi #32341, handled = 1, time = 1939956552
 cpu #6, nmi #32344, skip_nmi #32341, handled = 1, time = 1940073224
 cpu #6, nmi #32345, skip_nmi #32341, handled = 1, time = 1940485677
 cpu #6, nmi #32346, skip_nmi #32347, handled = 2, time = 1941947772
 cpu #6, nmi #32347, skip_nmi #32347, handled = 1, time = 1941949818
 cpu #6, nmi #32348, skip_nmi #32347, handled = 0, time = 1941951591
 Uhhuh. NMI received for unknown reason 00 on CPU 6.
 Do you have a strange power saving mode enabled?
 Dazed and confused, but trying to continue

Deltas:

 nmi #32334 340186
 nmi #32335 1327704
 nmi #32336 1819      <<<< back-to-back nmi [1]
 nmi #32337 85961
 nmi #32338 284507
 nmi #32339 1578809
 nmi #32340 217616
 nmi #32341 1798      <<<< back-to-back nmi [2]
 nmi #32342 240913
 nmi #32343 1512809
 nmi #32344 116672
 nmi #32345 412453
 nmi #32346 1462095   <<<< 1st nmi (standard) handling 2 counters
 nmi #32347 2046      <<<< 2nd nmi (back-to-back) handling one
 counter nmi #32348 1773      <<<< 3rd nmi (back-to-back)
 handling no counter! [3]

For  back-to-back nmi detection there are the following rules:

The PMU nmi handler was handling more than one counter and no
counter was handled in the subsequent nmi (see [1] and [2]
above).

There is another case if there are two subsequent back-to-back
nmis [3]. The 2nd is detected as back-to-back because the first
handled more than one counter. If the second handles one counter
and the 3rd handles nothing, we drop the 3rd nmi because it
could be a back-to-back nmi.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
[ renamed nmi variable to pmu_nmi to avoid clash with .nmi in entry.S ]
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: peterz@infradead.org
Cc: gorcunov@gmail.com
Cc: fweisbec@gmail.com
Cc: ying.huang@intel.com
Cc: ming.m.lin@intel.com
Cc: eranian@google.com
LKML-Reference: <1283454469-1909-3-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event.c | 59 +++++++++++++++++++++++++-------
 1 file changed, 46 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index f2da20fda02d..3efdf2870a35 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1154,7 +1154,7 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 		/*
 		 * event overflow
 		 */
-		handled		= 1;
+		handled++;
 		data.period	= event->hw.last_period;
 
 		if (!x86_perf_event_set_period(event))
@@ -1200,12 +1200,20 @@ void perf_events_lapic_init(void)
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 }
 
+struct pmu_nmi_state {
+	unsigned int	marked;
+	int		handled;
+};
+
+static DEFINE_PER_CPU(struct pmu_nmi_state, pmu_nmi);
+
 static int __kprobes
 perf_event_nmi_handler(struct notifier_block *self,
 			 unsigned long cmd, void *__args)
 {
 	struct die_args *args = __args;
-	struct pt_regs *regs;
+	unsigned int this_nmi;
+	int handled;
 
 	if (!atomic_read(&active_events))
 		return NOTIFY_DONE;
@@ -1214,22 +1222,47 @@ perf_event_nmi_handler(struct notifier_block *self,
 	case DIE_NMI:
 	case DIE_NMI_IPI:
 		break;
-
+	case DIE_NMIUNKNOWN:
+		this_nmi = percpu_read(irq_stat.__nmi_count);
+		if (this_nmi != __get_cpu_var(pmu_nmi).marked)
+			/* let the kernel handle the unknown nmi */
+			return NOTIFY_DONE;
+		/*
+		 * This one is a PMU back-to-back nmi. Two events
+		 * trigger 'simultaneously' raising two back-to-back
+		 * NMIs. If the first NMI handles both, the latter
+		 * will be empty and daze the CPU. So, we drop it to
+		 * avoid false-positive 'unknown nmi' messages.
+		 */
+		return NOTIFY_STOP;
 	default:
 		return NOTIFY_DONE;
 	}
 
-	regs = args->regs;
-
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	/*
-	 * Can't rely on the handled return value to say it was our NMI, two
-	 * events could trigger 'simultaneously' raising two back-to-back NMIs.
-	 *
-	 * If the first NMI handles both, the latter will be empty and daze
-	 * the CPU.
-	 */
-	x86_pmu.handle_irq(regs);
+
+	handled = x86_pmu.handle_irq(args->regs);
+	if (!handled)
+		return NOTIFY_DONE;
+
+	this_nmi = percpu_read(irq_stat.__nmi_count);
+	if ((handled > 1) ||
+		/* the next nmi could be a back-to-back nmi */
+	    ((__get_cpu_var(pmu_nmi).marked == this_nmi) &&
+	     (__get_cpu_var(pmu_nmi).handled > 1))) {
+		/*
+		 * We could have two subsequent back-to-back nmis: The
+		 * first handles more than one counter, the 2nd
+		 * handles only one counter and the 3rd handles no
+		 * counter.
+		 *
+		 * This is the 2nd nmi because the previous was
+		 * handling more than one counter. We will mark the
+		 * next (3rd) and then drop it if unhandled.
+		 */
+		__get_cpu_var(pmu_nmi).marked	= this_nmi + 1;
+		__get_cpu_var(pmu_nmi).handled	= handled;
+	}
 
 	return NOTIFY_STOP;
 }

From ef5dc121d5a0bb1fa477c5395277259f07d318a3 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 2 Sep 2010 15:48:16 -0700
Subject: [PATCH 099/728] mutex: Fix annotations to include it in
 kernel-locking docbook

Fix kernel-doc notation in linux/mutex.h and kernel/mutex.c,
then add these 2 files to the kernel-locking docbook as the
Mutex API reference chapter.

Add one API function to mutex-design.txt and correct a typo in
that file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20100902154816.6cc2f9ad.randy.dunlap@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 Documentation/DocBook/kernel-locking.tmpl |  6 ++++++
 Documentation/mutex-design.txt            |  3 ++-
 include/linux/mutex.h                     |  8 ++++++++
 kernel/mutex.c                            | 23 +++++++----------------
 4 files changed, 23 insertions(+), 17 deletions(-)

diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 0b1a3f97f285..a0d479d1e1dd 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -1961,6 +1961,12 @@ machines due to caching.
    </sect1>
   </chapter>
 
+  <chapter id="apiref">
+   <title>Mutex API reference</title>
+!Iinclude/linux/mutex.h
+!Ekernel/mutex.c
+  </chapter>
+
   <chapter id="references">
    <title>Further reading</title>
 
diff --git a/Documentation/mutex-design.txt b/Documentation/mutex-design.txt
index c91ccc0720fa..38c10fd7f411 100644
--- a/Documentation/mutex-design.txt
+++ b/Documentation/mutex-design.txt
@@ -9,7 +9,7 @@ firstly, there's nothing wrong with semaphores. But if the simpler
 mutex semantics are sufficient for your code, then there are a couple
 of advantages of mutexes:
 
- - 'struct mutex' is smaller on most architectures: .e.g on x86,
+ - 'struct mutex' is smaller on most architectures: E.g. on x86,
    'struct semaphore' is 20 bytes, 'struct mutex' is 16 bytes.
    A smaller structure size means less RAM footprint, and better
    CPU-cache utilization.
@@ -136,3 +136,4 @@ the APIs of 'struct mutex' have been streamlined:
  void mutex_lock_nested(struct mutex *lock, unsigned int subclass);
  int  mutex_lock_interruptible_nested(struct mutex *lock,
                                       unsigned int subclass);
+ int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index 878cab4f5fcc..f363bc8fdc74 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -78,6 +78,14 @@ struct mutex_waiter {
 # include <linux/mutex-debug.h>
 #else
 # define __DEBUG_MUTEX_INITIALIZER(lockname)
+/**
+ * mutex_init - initialize the mutex
+ * @mutex: the mutex to be initialized
+ *
+ * Initialize the mutex to unlocked state.
+ *
+ * It is not allowed to initialize an already locked mutex.
+ */
 # define mutex_init(mutex) \
 do {							\
 	static struct lock_class_key __key;		\
diff --git a/kernel/mutex.c b/kernel/mutex.c
index 4c0b7b3e6d2e..200407c1502f 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -36,15 +36,6 @@
 # include <asm/mutex.h>
 #endif
 
-/***
- * mutex_init - initialize the mutex
- * @lock: the mutex to be initialized
- * @key: the lock_class_key for the class; used by mutex lock debugging
- *
- * Initialize the mutex to unlocked state.
- *
- * It is not allowed to initialize an already locked mutex.
- */
 void
 __mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key)
 {
@@ -68,7 +59,7 @@ EXPORT_SYMBOL(__mutex_init);
 static __used noinline void __sched
 __mutex_lock_slowpath(atomic_t *lock_count);
 
-/***
+/**
  * mutex_lock - acquire the mutex
  * @lock: the mutex to be acquired
  *
@@ -105,7 +96,7 @@ EXPORT_SYMBOL(mutex_lock);
 
 static __used noinline void __sched __mutex_unlock_slowpath(atomic_t *lock_count);
 
-/***
+/**
  * mutex_unlock - release the mutex
  * @lock: the mutex to be released
  *
@@ -364,8 +355,8 @@ __mutex_lock_killable_slowpath(atomic_t *lock_count);
 static noinline int __sched
 __mutex_lock_interruptible_slowpath(atomic_t *lock_count);
 
-/***
- * mutex_lock_interruptible - acquire the mutex, interruptable
+/**
+ * mutex_lock_interruptible - acquire the mutex, interruptible
  * @lock: the mutex to be acquired
  *
  * Lock the mutex like mutex_lock(), and return 0 if the mutex has
@@ -456,15 +447,15 @@ static inline int __mutex_trylock_slowpath(atomic_t *lock_count)
 	return prev == 1;
 }
 
-/***
- * mutex_trylock - try acquire the mutex, without waiting
+/**
+ * mutex_trylock - try to acquire the mutex, without waiting
  * @lock: the mutex to be acquired
  *
  * Try to acquire the mutex atomically. Returns 1 if the mutex
  * has been acquired successfully, and 0 on contention.
  *
  * NOTE: this function follows the spin_trylock() convention, so
- * it is negated to the down_trylock() return values! Be careful
+ * it is negated from the down_trylock() return values! Be careful
  * about this when converting semaphore users to mutexes.
  *
  * This function must not be used in interrupt context. The

From d34c4aa43df20bbf2730a67f14c1cf6d133d99e6 Mon Sep 17 00:00:00 2001
From: Johan Hovold <jhovold@gmail.com>
Date: Thu, 2 Sep 2010 23:05:09 +0200
Subject: [PATCH 100/728] HID: add no-get quirk for eGalax touch controller

Add no-get quirk for eGalax touch controller to avoid timeout at probe.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 16808f19a4b4..70da3181c8a0 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -33,7 +33,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_AASHIMA, USB_DEVICE_ID_AASHIMA_PREDATOR, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD, HID_QUIRK_BADPAD },
 	{ USB_VENDOR_ID_CHIC, USB_DEVICE_ID_CHIC_GAMEPAD, HID_QUIRK_BADPAD },
-	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT },
+	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER, HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_MOJO, USB_DEVICE_ID_RETRO_ADAPTER, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_HAPP, USB_DEVICE_ID_UGCI_DRIVING, HID_QUIRK_BADPAD | HID_QUIRK_MULTI_INPUT },

From a2acad8298a42b7be684a32fafaf83332bba9c2b Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Fri, 3 Sep 2010 10:53:11 +0200
Subject: [PATCH 101/728] ALSA: usb-audio: fix detection of vendor-specific
 device protocol settings

The Audio Class v2 support code in 2.6.35 added checks for the
bInterfaceProtocol field.  However, there are devices (usually those
detected by vendor-specific quirks) that do not have one of the
predefined values in this field, which made the driver reject them.

To fix this regression, restore the old behaviour, i.e., assume that
a device with an unknown bInterfaceProtocol field (other than
UAC_VERSION_2) has more or less UAC-v1-compatible descriptors.

[compile warning fixes by tiwai]

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/card.c     |  9 +++++----
 sound/usb/clock.c    |  3 +--
 sound/usb/endpoint.c | 11 ++++++-----
 sound/usb/format.c   | 22 ++++++++++------------
 sound/usb/mixer.c    | 10 +++++++++-
 sound/usb/pcm.c      |  3 +--
 6 files changed, 32 insertions(+), 26 deletions(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index b443a33d31c9..32e4be8a187c 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -216,6 +216,11 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
 	}
 
 	switch (protocol) {
+	default:
+		snd_printdd(KERN_WARNING "unknown interface protocol %#02x, assuming v1\n",
+			    protocol);
+		/* fall through */
+
 	case UAC_VERSION_1: {
 		struct uac1_ac_header_descriptor *h1 = control_header;
 
@@ -253,10 +258,6 @@ static int snd_usb_create_streams(struct snd_usb_audio *chip, int ctrlif)
 
 		break;
 	}
-
-	default:
-		snd_printk(KERN_ERR "unknown protocol version 0x%02x\n", protocol);
-		return -EINVAL;
 	}
 
 	return 0;
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index b853f8df794f..7754a1034545 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -295,12 +295,11 @@ int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
 
 	switch (altsd->bInterfaceProtocol) {
 	case UAC_VERSION_1:
+	default:
 		return set_sample_rate_v1(chip, iface, alts, fmt, rate);
 
 	case UAC_VERSION_2:
 		return set_sample_rate_v2(chip, iface, alts, fmt, rate);
 	}
-
-	return -EINVAL;
 }
 
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 1a701f1e8f50..ef0a07e34844 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -275,6 +275,12 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 
 		/* get audio formats */
 		switch (protocol) {
+		default:
+			snd_printdd(KERN_WARNING "%d:%u:%d: unknown interface protocol %#02x, assuming v1\n",
+				    dev->devnum, iface_no, altno, protocol);
+			protocol = UAC_VERSION_1;
+			/* fall through */
+
 		case UAC_VERSION_1: {
 			struct uac1_as_header_descriptor *as =
 				snd_usb_find_csint_desc(alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
@@ -336,11 +342,6 @@ int snd_usb_parse_audio_endpoints(struct snd_usb_audio *chip, int iface_no)
 				   dev->devnum, iface_no, altno, as->bTerminalLink);
 			continue;
 		}
-
-		default:
-			snd_printk(KERN_ERR "%d:%u:%d : unknown interface protocol %04x\n",
-				   dev->devnum, iface_no, altno, protocol);
-			continue;
 		}
 
 		/* get format type */
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 3a1375459c06..69148212aa70 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -49,7 +49,8 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 	u64 pcm_formats;
 
 	switch (protocol) {
-	case UAC_VERSION_1: {
+	case UAC_VERSION_1:
+	default: {
 		struct uac_format_type_i_discrete_descriptor *fmt = _fmt;
 		sample_width = fmt->bBitResolution;
 		sample_bytes = fmt->bSubframeSize;
@@ -64,9 +65,6 @@ static u64 parse_audio_format_i_type(struct snd_usb_audio *chip,
 		format <<= 1;
 		break;
 	}
-
-	default:
-		return -EINVAL;
 	}
 
 	pcm_formats = 0;
@@ -384,6 +382,10 @@ static int parse_audio_format_i(struct snd_usb_audio *chip,
 	 * audio class v2 uses class specific EP0 range requests for that.
 	 */
 	switch (protocol) {
+	default:
+		snd_printdd(KERN_WARNING "%d:%u:%d : invalid protocol version %d, assuming v1\n",
+			   chip->dev->devnum, fp->iface, fp->altsetting, protocol);
+		/* fall through */
 	case UAC_VERSION_1:
 		fp->channels = fmt->bNrChannels;
 		ret = parse_audio_format_rates_v1(chip, fp, (unsigned char *) fmt, 7);
@@ -392,10 +394,6 @@ static int parse_audio_format_i(struct snd_usb_audio *chip,
 		/* fp->channels is already set in this case */
 		ret = parse_audio_format_rates_v2(chip, fp);
 		break;
-	default:
-		snd_printk(KERN_ERR "%d:%u:%d : invalid protocol version %d\n",
-			   chip->dev->devnum, fp->iface, fp->altsetting, protocol);
-		return -EINVAL;
 	}
 
 	if (fp->channels < 1) {
@@ -438,6 +436,10 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip,
 	fp->channels = 1;
 
 	switch (protocol) {
+	default:
+		snd_printdd(KERN_WARNING "%d:%u:%d : invalid protocol version %d, assuming v1\n",
+			   chip->dev->devnum, fp->iface, fp->altsetting, protocol);
+		/* fall through */
 	case UAC_VERSION_1: {
 		struct uac_format_type_ii_discrete_descriptor *fmt = _fmt;
 		brate = le16_to_cpu(fmt->wMaxBitRate);
@@ -456,10 +458,6 @@ static int parse_audio_format_ii(struct snd_usb_audio *chip,
 		ret = parse_audio_format_rates_v2(chip, fp);
 		break;
 	}
-	default:
-		snd_printk(KERN_ERR "%d:%u:%d : invalid protocol version %d\n",
-			   chip->dev->devnum, fp->iface, fp->altsetting, protocol);
-		return -EINVAL;
 	}
 
 	return ret;
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index c166db0057d3..3ed3901369ce 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -2175,7 +2175,15 @@ int snd_usb_create_mixer(struct snd_usb_audio *chip, int ctrlif,
 	}
 
 	host_iface = &usb_ifnum_to_if(chip->dev, ctrlif)->altsetting[0];
-	mixer->protocol = get_iface_desc(host_iface)->bInterfaceProtocol;
+	switch (get_iface_desc(host_iface)->bInterfaceProtocol) {
+	case UAC_VERSION_1:
+	default:
+		mixer->protocol = UAC_VERSION_1;
+		break;
+	case UAC_VERSION_2:
+		mixer->protocol = UAC_VERSION_2;
+		break;
+	}
 
 	if ((err = snd_usb_mixer_controls(mixer)) < 0 ||
 	    (err = snd_usb_mixer_status_create(mixer)) < 0)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 3634cedf9306..3b5135c93062 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -173,13 +173,12 @@ int snd_usb_init_pitch(struct snd_usb_audio *chip, int iface,
 
 	switch (altsd->bInterfaceProtocol) {
 	case UAC_VERSION_1:
+	default:
 		return init_pitch_v1(chip, iface, alts, fmt);
 
 	case UAC_VERSION_2:
 		return init_pitch_v2(chip, iface, alts, fmt);
 	}
-
-	return -EINVAL;
 }
 
 /*

From d06563cb860ab594889010889a7111c9e25d1051 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 4 Sep 2010 23:10:48 +0800
Subject: [PATCH 102/728] regulator: 88pm8607 - fix value range checking for
 accessing info->vol_table

In choose_voltage(), we use i as array index of info->vol_table.
The valid value range for i should be 0 .. ARRAY_SIZE(info->vol_table) - 1.

Take LDO1 as example, ARRAY_SIZE(LDO1_table) is 4, vol_nbits of LDO1 is 2.
for (i = 0; i < (2 << info->vol_nbits); i++)  is equivalent to
for (i = 0; i < 8; i++)
which is wrong.

The same value range checking also applies for index in pm8607_list_voltage().

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@openource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/88pm8607.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 7d149a8d8d9b..2ce2eb71d0f5 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -215,7 +215,7 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
 	int ret = -EINVAL;
 
-	if (info->vol_table && (index < (2 << info->vol_nbits))) {
+	if (info->vol_table && (index < (1 << info->vol_nbits))) {
 		ret = info->vol_table[index];
 		if (info->slope_double)
 			ret <<= 1;
@@ -233,7 +233,7 @@ static int choose_voltage(struct regulator_dev *rdev, int min_uV, int max_uV)
 		max_uV = max_uV >> 1;
 	}
 	if (info->vol_table) {
-		for (i = 0; i < (2 << info->vol_nbits); i++) {
+		for (i = 0; i < (1 << info->vol_nbits); i++) {
 			if (!info->vol_table[i])
 				break;
 			if ((min_uV <= info->vol_table[i])

From 49990e6efe576b8707584398f93198b5aa182ab7 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Sat, 4 Sep 2010 23:06:41 +0800
Subject: [PATCH 103/728] regulator: ab8500 - fix off-by-one value range
 checking for selector

selector is used as array index of info->supported_voltages
Thus the valid value range should be 0 .. info->voltages_len -1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@openource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/ab8500.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 3d09580dc883..28c7ae67cec9 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -157,7 +157,7 @@ static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
 	if (info->fixed_uV)
 		return info->fixed_uV;
 
-	if (selector > info->voltages_len)
+	if (selector >= info->voltages_len)
 		return -EINVAL;
 
 	return info->supported_voltages[selector];

From cc1a8e523333bc3d990102140f4d12908fa83caf Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sat, 4 Sep 2010 22:56:43 +0200
Subject: [PATCH 104/728] x86: Fix the address space annotations of
 iomap_atomic_prot_pfn()

This patch fixes the sparse warnings when the return pointer of
iomap_atomic_prot_pfn() is used as an argument of iowrite32()
and friends.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
LKML-Reference: <1283633804-11749-1-git-send-email-currojerez@riseup.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/iomap.h | 4 ++--
 arch/x86/mm/iomap_32.c       | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index f35eb45d6576..c4191b3b7056 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -26,11 +26,11 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-void *
+void __iomem *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 
 void
-iounmap_atomic(void *kvaddr, enum km_type type);
+iounmap_atomic(void __iomem *kvaddr, enum km_type type);
 
 int
 iomap_create_wc(resource_size_t base, unsigned long size, pgprot_t *prot);
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index 84e236ce76ba..72fc70cf6184 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -74,7 +74,7 @@ void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 /*
  * Map 'pfn' using fixed map 'type' and protections 'prot'
  */
-void *
+void __iomem *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
 	/*
@@ -86,12 +86,12 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 	if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC))
 		prot = PAGE_KERNEL_UC_MINUS;
 
-	return kmap_atomic_prot_pfn(pfn, type, prot);
+	return (void __force __iomem *) kmap_atomic_prot_pfn(pfn, type, prot);
 }
 EXPORT_SYMBOL_GPL(iomap_atomic_prot_pfn);
 
 void
-iounmap_atomic(void *kvaddr, enum km_type type)
+iounmap_atomic(void __iomem *kvaddr, enum km_type type)
 {
 	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
 	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();

From 29bc17ecb856ffb2b47c7009a71971c6f9334205 Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Sat, 4 Sep 2010 22:56:44 +0200
Subject: [PATCH 105/728] io-mapping: Fix the address space annotations

Fixes a bunch of sparse warnings in io-mapping.h because of the
inconsistent __iomem usage.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
LKML-Reference: <1283633804-11749-2-git-send-email-currojerez@riseup.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/io-mapping.h | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h
index 0a6b3d5c490c..7fb592793738 100644
--- a/include/linux/io-mapping.h
+++ b/include/linux/io-mapping.h
@@ -79,7 +79,7 @@ io_mapping_free(struct io_mapping *mapping)
 }
 
 /* Atomic map/unmap */
-static inline void *
+static inline void __iomem *
 io_mapping_map_atomic_wc(struct io_mapping *mapping,
 			 unsigned long offset,
 			 int slot)
@@ -94,12 +94,12 @@ io_mapping_map_atomic_wc(struct io_mapping *mapping,
 }
 
 static inline void
-io_mapping_unmap_atomic(void *vaddr, int slot)
+io_mapping_unmap_atomic(void __iomem *vaddr, int slot)
 {
 	iounmap_atomic(vaddr, slot);
 }
 
-static inline void *
+static inline void __iomem *
 io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
 {
 	resource_size_t phys_addr;
@@ -111,7 +111,7 @@ io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
 }
 
 static inline void
-io_mapping_unmap(void *vaddr)
+io_mapping_unmap(void __iomem *vaddr)
 {
 	iounmap(vaddr);
 }
@@ -125,38 +125,38 @@ struct io_mapping;
 static inline struct io_mapping *
 io_mapping_create_wc(resource_size_t base, unsigned long size)
 {
-	return (struct io_mapping *) ioremap_wc(base, size);
+	return (struct io_mapping __force *) ioremap_wc(base, size);
 }
 
 static inline void
 io_mapping_free(struct io_mapping *mapping)
 {
-	iounmap(mapping);
+	iounmap((void __force __iomem *) mapping);
 }
 
 /* Atomic map/unmap */
-static inline void *
+static inline void __iomem *
 io_mapping_map_atomic_wc(struct io_mapping *mapping,
 			 unsigned long offset,
 			 int slot)
 {
-	return ((char *) mapping) + offset;
+	return ((char __force __iomem *) mapping) + offset;
 }
 
 static inline void
-io_mapping_unmap_atomic(void *vaddr, int slot)
+io_mapping_unmap_atomic(void __iomem *vaddr, int slot)
 {
 }
 
 /* Non-atomic map/unmap */
-static inline void *
+static inline void __iomem *
 io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset)
 {
-	return ((char *) mapping) + offset;
+	return ((char __force __iomem *) mapping) + offset;
 }
 
 static inline void
-io_mapping_unmap(void *vaddr)
+io_mapping_unmap(void __iomem *vaddr)
 {
 }
 

From 1389298f7d14f179c2fa4b4b343079bd56082c70 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Fri, 27 Aug 2010 11:20:07 +0200
Subject: [PATCH 106/728] x86, mcheck: Avoid duplicate sysfs links/files for
 thresholding banks

kobject_add_internal failed for threshold_bank2 with -EEXIST,
don't try to register things with the same name in the same
directory:

  Pid: 1, comm: swapper Tainted: G        W  2.6.31 #1
  Call Trace:
  [<ffffffff81161b07>] ? kobject_add_internal+0x156/0x180
  [<ffffffff81161cc0>] ? kobject_add+0x66/0x6b
  [<ffffffff81161793>] ? kobject_init+0x42/0x82
  [<ffffffff81161cf9>] ? kobject_create_and_add+0x34/0x63
  [<ffffffff81393963>] ? threshold_create_bank+0x14f/0x259
  [<ffffffff8139310a>] ? mce_create_device+0x8d/0x1b8
  [<ffffffff81646497>] ? threshold_init_device+0x3f/0x80
  [<ffffffff81646458>] ? threshold_init_device+0x0/0x80
  [<ffffffff81009050>] ? do_one_initcall+0x4f/0x143
  [<ffffffff816413a0>] ? kernel_init+0x14c/0x1a2
  [<ffffffff8100c8da>] ? child_rip+0xa/0x20
  [<ffffffff81641254>] ? kernel_init+0x0/0x1a2
  [<ffffffff8100c8d0>] ? child_rip+0x0/0x20
  kobject_create_and_add: kobject_add error: -17

(Probably the for_each_cpu loop should be entirely removed.)

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
LKML-Reference: <20100827092006.GB5348@loge.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 224392d8fe8c..5e975298fa81 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -530,7 +530,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		err = -ENOMEM;
 		goto out;
 	}
-	if (!alloc_cpumask_var(&b->cpus, GFP_KERNEL)) {
+	if (!zalloc_cpumask_var(&b->cpus, GFP_KERNEL)) {
 		kfree(b);
 		err = -ENOMEM;
 		goto out;
@@ -543,7 +543,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 #ifndef CONFIG_SMP
 	cpumask_setall(b->cpus);
 #else
-	cpumask_copy(b->cpus, c->llc_shared_map);
+	cpumask_set_cpu(cpu, b->cpus);
 #endif
 
 	per_cpu(threshold_banks, cpu)[bank] = b;

From b3bd3de66f60df4c9a2076e2886a622458929056 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Tue, 10 Aug 2010 14:17:51 -0700
Subject: [PATCH 107/728] gcc-4.6: kernel/*: Fix unused but set warnings

No real bugs I believe, just some dead code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: andi@firstfloor.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/debug/kdb/kdb_bp.c  | 2 --
 kernel/hrtimer.c           | 3 +--
 kernel/sched_fair.c        | 3 +--
 kernel/sysctl.c            | 5 +----
 kernel/trace/ring_buffer.c | 2 --
 5 files changed, 3 insertions(+), 12 deletions(-)

diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c
index 75bd9b3ebbb7..20059ef4459a 100644
--- a/kernel/debug/kdb/kdb_bp.c
+++ b/kernel/debug/kdb/kdb_bp.c
@@ -274,7 +274,6 @@ static int kdb_bp(int argc, const char **argv)
 	int i, bpno;
 	kdb_bp_t *bp, *bp_check;
 	int diag;
-	int free;
 	char *symname = NULL;
 	long offset = 0ul;
 	int nextarg;
@@ -305,7 +304,6 @@ static int kdb_bp(int argc, const char **argv)
 	/*
 	 * Find an empty bp structure to allocate
 	 */
-	free = KDB_MAXBPT;
 	for (bpno = 0, bp = kdb_breakpoints; bpno < KDB_MAXBPT; bpno++, bp++) {
 		if (bp->bp_free)
 			break;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index ce669174f355..1decafbb6b1a 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1091,11 +1091,10 @@ EXPORT_SYMBOL_GPL(hrtimer_cancel);
  */
 ktime_t hrtimer_get_remaining(const struct hrtimer *timer)
 {
-	struct hrtimer_clock_base *base;
 	unsigned long flags;
 	ktime_t rem;
 
-	base = lock_hrtimer_base(timer, &flags);
+	lock_hrtimer_base(timer, &flags);
 	rem = hrtimer_expires_remaining(timer);
 	unlock_hrtimer_base(timer, &flags);
 
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index ab661ebc4895..134f7edb30c6 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -1313,7 +1313,7 @@ static struct sched_group *
 find_idlest_group(struct sched_domain *sd, struct task_struct *p,
 		  int this_cpu, int load_idx)
 {
-	struct sched_group *idlest = NULL, *this = NULL, *group = sd->groups;
+	struct sched_group *idlest = NULL, *group = sd->groups;
 	unsigned long min_load = ULONG_MAX, this_load = 0;
 	int imbalance = 100 + (sd->imbalance_pct-100)/2;
 
@@ -1348,7 +1348,6 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p,
 
 		if (local_group) {
 			this_load = avg_load;
-			this = group;
 		} else if (avg_load < min_load) {
 			min_load = avg_load;
 			idlest = group;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index ca38e8e3e907..f88552c6d227 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1713,10 +1713,7 @@ static __init int sysctl_init(void)
 {
 	sysctl_set_parent(NULL, root_table);
 #ifdef CONFIG_SYSCTL_SYSCALL_CHECK
-	{
-		int err;
-		err = sysctl_check_table(current->nsproxy, root_table);
-	}
+	sysctl_check_table(current->nsproxy, root_table);
 #endif
 	return 0;
 }
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 19cccc3c3028..492197e2f86c 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2985,13 +2985,11 @@ static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer)
 
 static void rb_advance_iter(struct ring_buffer_iter *iter)
 {
-	struct ring_buffer *buffer;
 	struct ring_buffer_per_cpu *cpu_buffer;
 	struct ring_buffer_event *event;
 	unsigned length;
 
 	cpu_buffer = iter->cpu_buffer;
-	buffer = cpu_buffer->buffer;
 
 	/*
 	 * Check if we are at the end of the buffer.

From feafb7b1714cf599a6d0fed45801ab3f66046cbd Mon Sep 17 00:00:00 2001
From: Arun Easi <arun.easi@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:00 -0700
Subject: [PATCH 108/728] [SCSI] qla2xxx: Fix vport delete issues

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_attr.c | 23 +++++---
 drivers/scsi/qla2xxx/qla_dbg.h  |  2 -
 drivers/scsi/qla2xxx/qla_def.h  | 20 +++++++
 drivers/scsi/qla2xxx/qla_init.c | 94 ++++++++++++++++++++++++++++-----
 drivers/scsi/qla2xxx/qla_mbx.c  |  7 ++-
 drivers/scsi/qla2xxx/qla_mid.c  | 67 ++++++++++++++++++++---
 drivers/scsi/qla2xxx/qla_os.c   | 30 +++++++++--
 7 files changed, 207 insertions(+), 36 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 420238cc794e..114bc5a81171 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1838,26 +1838,33 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
 
 	qla24xx_disable_vp(vha);
 
+	vha->flags.delete_progress = 1;
+
 	fc_remove_host(vha->host);
 
 	scsi_remove_host(vha->host);
 
-	qla2x00_free_fcports(vha);
+	if (vha->timer_active) {
+		qla2x00_vp_stop_timer(vha);
+		DEBUG15(printk(KERN_INFO "scsi(%ld): timer for the vport[%d]"
+		" = %p has stopped\n", vha->host_no, vha->vp_idx, vha));
+	}
 
 	qla24xx_deallocate_vp_id(vha);
 
+	/* No pending activities shall be there on the vha now */
+	DEBUG(msleep(random32()%10));  /* Just to see if something falls on
+					* the net we have placed below */
+
+	BUG_ON(atomic_read(&vha->vref_count));
+
+	qla2x00_free_fcports(vha);
+
 	mutex_lock(&ha->vport_lock);
 	ha->cur_vport_count--;
 	clear_bit(vha->vp_idx, ha->vp_idx_map);
 	mutex_unlock(&ha->vport_lock);
 
-	if (vha->timer_active) {
-		qla2x00_vp_stop_timer(vha);
-		DEBUG15(printk ("scsi(%ld): timer for the vport[%d] = %p "
-		    "has stopped\n",
-		    vha->host_no, vha->vp_idx, vha));
-        }
-
 	if (vha->req->id && !ha->flags.cpu_affinity_enabled) {
 		if (qla25xx_delete_req_que(vha, vha->req) != QLA_SUCCESS)
 			qla_printk(KERN_WARNING, ha,
diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 6cfc28a25eb3..b74e6b5743dc 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -29,8 +29,6 @@
 /* #define QL_DEBUG_LEVEL_17 */ /* Output EEH trace messages */
 /* #define QL_DEBUG_LEVEL_18 */ /* Output T10 CRC trace messages */
 
-/* #define QL_PRINTK_BUF */ /* Captures printk to buffer */
-
 /*
 * Macros use for debugging the driver.
 */
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 3a432ea0c7a3..d2a4e1530708 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2641,6 +2641,7 @@ struct qla_hw_data {
 #define MBX_UPDATE_FLASH_ACTIVE	3
 
 	struct mutex vport_lock;        /* Virtual port synchronization */
+	spinlock_t vport_slock; /* order is hardware_lock, then vport_slock */
 	struct completion mbx_cmd_comp; /* Serialize mbx access */
 	struct completion mbx_intr_comp;  /* Used for completion notification */
 	struct completion dcbx_comp;	/* For set port config notification */
@@ -2828,6 +2829,7 @@ typedef struct scsi_qla_host {
 		uint32_t	management_server_logged_in :1;
 		uint32_t	process_response_queue	:1;
 		uint32_t	difdix_supported:1;
+		uint32_t	delete_progress:1;
 	} flags;
 
 	atomic_t	loop_state;
@@ -2922,6 +2924,8 @@ typedef struct scsi_qla_host {
 	struct req_que *req;
 	int		fw_heartbeat_counter;
 	int		seconds_since_last_heartbeat;
+
+	atomic_t	vref_count;
 } scsi_qla_host_t;
 
 /*
@@ -2932,6 +2936,22 @@ typedef struct scsi_qla_host {
 	 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
 	 atomic_read(&ha->loop_state) == LOOP_DOWN)
 
+#define QLA_VHA_MARK_BUSY(__vha, __bail) do {		     \
+	atomic_inc(&__vha->vref_count);			     \
+	mb();						     \
+	if (__vha->flags.delete_progress) {		     \
+		atomic_dec(&__vha->vref_count);		     \
+		__bail = 1;				     \
+	} else {					     \
+		__bail = 0;				     \
+	}						     \
+} while (0)
+
+#define QLA_VHA_MARK_NOT_BUSY(__vha) do {		     \
+	atomic_dec(&__vha->vref_count);			     \
+} while (0)
+
+
 #define qla_printk(level, ha, format, arg...) \
 	dev_printk(level , &((ha)->pdev->dev) , format , ## arg)
 
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d863ed2619b5..9c383baebe27 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -69,21 +69,29 @@ qla2x00_ctx_sp_free(srb_t *sp)
 {
 	struct srb_ctx *ctx = sp->ctx;
 	struct srb_iocb *iocb = ctx->u.iocb_cmd;
+	struct scsi_qla_host *vha = sp->fcport->vha;
 
 	del_timer_sync(&iocb->timer);
 	kfree(iocb);
 	kfree(ctx);
 	mempool_free(sp, sp->fcport->vha->hw->srb_mempool);
+
+	QLA_VHA_MARK_NOT_BUSY(vha);
 }
 
 inline srb_t *
 qla2x00_get_ctx_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size,
     unsigned long tmo)
 {
-	srb_t *sp;
+	srb_t *sp = NULL;
 	struct qla_hw_data *ha = vha->hw;
 	struct srb_ctx *ctx;
 	struct srb_iocb *iocb;
+	uint8_t bail;
+
+	QLA_VHA_MARK_BUSY(vha, bail);
+	if (bail)
+		return NULL;
 
 	sp = mempool_alloc(ha->srb_mempool, GFP_KERNEL);
 	if (!sp)
@@ -116,6 +124,8 @@ qla2x00_get_ctx_sp(scsi_qla_host_t *vha, fc_port_t *fcport, size_t size,
 	iocb->timer.function = qla2x00_ctx_sp_timeout;
 	add_timer(&iocb->timer);
 done:
+	if (!sp)
+		QLA_VHA_MARK_NOT_BUSY(vha);
 	return sp;
 }
 
@@ -1777,11 +1787,15 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
 		qla2x00_init_response_q_entries(rsp);
 	}
 
+	spin_lock_irqsave(&ha->vport_slock, flags);
 	/* Clear RSCN queue. */
 	list_for_each_entry(vp, &ha->vp_list, list) {
 		vp->rscn_in_ptr = 0;
 		vp->rscn_out_ptr = 0;
 	}
+
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 	ha->isp_ops->config_rings(vha);
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -3218,12 +3232,17 @@ qla2x00_find_all_fabric_devs(scsi_qla_host_t *vha,
 		/* Bypass virtual ports of the same host. */
 		found = 0;
 		if (ha->num_vhosts) {
+			unsigned long flags;
+
+			spin_lock_irqsave(&ha->vport_slock, flags);
 			list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 				if (new_fcport->d_id.b24 == vp->d_id.b24) {
 					found = 1;
 					break;
 				}
 			}
+			spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 			if (found)
 				continue;
 		}
@@ -3343,6 +3362,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp;
 	struct scsi_qla_host *tvp;
+	unsigned long flags = 0;
 
 	rval = QLA_SUCCESS;
 
@@ -3367,6 +3387,8 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 		/* Check for loop ID being already in use. */
 		found = 0;
 		fcport = NULL;
+
+		spin_lock_irqsave(&ha->vport_slock, flags);
 		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
 			list_for_each_entry(fcport, &vp->vp_fcports, list) {
 				if (fcport->loop_id == dev->loop_id &&
@@ -3379,6 +3401,7 @@ qla2x00_find_new_loop_id(scsi_qla_host_t *vha, fc_port_t *dev)
 			if (found)
 				break;
 		}
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 		/* If not in use then it is free to use. */
 		if (!found) {
@@ -3791,14 +3814,27 @@ void
 qla2x00_update_fcports(scsi_qla_host_t *base_vha)
 {
 	fc_port_t *fcport;
-	struct scsi_qla_host *tvp, *vha;
+	struct scsi_qla_host *vha;
+	struct qla_hw_data *ha = base_vha->hw;
+	unsigned long flags;
 
+	spin_lock_irqsave(&ha->vport_slock, flags);
 	/* Go with deferred removal of rport references. */
-	list_for_each_entry_safe(vha, tvp, &base_vha->hw->vp_list, list)
-		list_for_each_entry(fcport, &vha->vp_fcports, list)
+	list_for_each_entry(vha, &base_vha->hw->vp_list, list) {
+		atomic_inc(&vha->vref_count);
+		list_for_each_entry(fcport, &vha->vp_fcports, list) {
 			if (fcport && fcport->drport &&
-			    atomic_read(&fcport->state) != FCS_UNCONFIGURED)
+			    atomic_read(&fcport->state) != FCS_UNCONFIGURED) {
+				spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 				qla2x00_rport_del(fcport);
+
+				spin_lock_irqsave(&ha->vport_slock, flags);
+			}
+		}
+		atomic_dec(&vha->vref_count);
+	}
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
 }
 
 void
@@ -3806,7 +3842,7 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
-	struct scsi_qla_host *tvp;
+	unsigned long flags;
 
 	vha->flags.online = 0;
 	ha->flags.chip_reset_done = 0;
@@ -3824,8 +3860,18 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
 		atomic_set(&vha->loop_state, LOOP_DOWN);
 		qla2x00_mark_all_devices_lost(vha, 0);
-		list_for_each_entry_safe(vp, tvp, &base_vha->hw->vp_list, list)
+
+		spin_lock_irqsave(&ha->vport_slock, flags);
+		list_for_each_entry(vp, &base_vha->hw->vp_list, list) {
+			atomic_inc(&vp->vref_count);
+			spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 			qla2x00_mark_all_devices_lost(vp, 0);
+
+			spin_lock_irqsave(&ha->vport_slock, flags);
+			atomic_dec(&vp->vref_count);
+		}
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
 	} else {
 		if (!atomic_read(&vha->loop_down_timer))
 			atomic_set(&vha->loop_down_timer,
@@ -3862,8 +3908,8 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 	uint8_t        status = 0;
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp;
-	struct scsi_qla_host *tvp;
 	struct req_que *req = ha->req_q_map[0];
+	unsigned long flags;
 
 	if (vha->flags.online) {
 		qla2x00_abort_isp_cleanup(vha);
@@ -3970,10 +4016,21 @@ qla2x00_abort_isp(scsi_qla_host_t *vha)
 		DEBUG(printk(KERN_INFO
 				"qla2x00_abort_isp(%ld): succeeded.\n",
 				vha->host_no));
-		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
-			if (vp->vp_idx)
+
+		spin_lock_irqsave(&ha->vport_slock, flags);
+		list_for_each_entry(vp, &ha->vp_list, list) {
+			if (vp->vp_idx) {
+				atomic_inc(&vp->vref_count);
+				spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 				qla2x00_vp_abort_isp(vp);
+
+				spin_lock_irqsave(&ha->vport_slock, flags);
+				atomic_dec(&vp->vref_count);
+			}
 		}
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 	} else {
 		qla_printk(KERN_INFO, ha,
 			"qla2x00_abort_isp: **** FAILED ****\n");
@@ -5185,7 +5242,7 @@ qla82xx_restart_isp(scsi_qla_host_t *vha)
 	struct req_que *req = ha->req_q_map[0];
 	struct rsp_que *rsp = ha->rsp_q_map[0];
 	struct scsi_qla_host *vp;
-	struct scsi_qla_host *tvp;
+	unsigned long flags;
 
 	status = qla2x00_init_rings(vha);
 	if (!status) {
@@ -5272,10 +5329,21 @@ qla82xx_restart_isp(scsi_qla_host_t *vha)
 		DEBUG(printk(KERN_INFO
 			"qla82xx_restart_isp(%ld): succeeded.\n",
 			vha->host_no));
-		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
-			if (vp->vp_idx)
+
+		spin_lock_irqsave(&ha->vport_slock, flags);
+		list_for_each_entry(vp, &ha->vp_list, list) {
+			if (vp->vp_idx) {
+				atomic_inc(&vp->vref_count);
+				spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 				qla2x00_vp_abort_isp(vp);
+
+				spin_lock_irqsave(&ha->vport_slock, flags);
+				atomic_dec(&vp->vref_count);
+			}
 		}
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 	} else {
 		qla_printk(KERN_INFO, ha,
 			"qla82xx_restart_isp: **** FAILED ****\n");
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 6009b0c69488..a595ec8264f8 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2913,7 +2913,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 	uint16_t stat = le16_to_cpu(rptid_entry->vp_idx);
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *vp;
-	scsi_qla_host_t *tvp;
+	unsigned long   flags;
 
 	if (rptid_entry->entry_status != 0)
 		return;
@@ -2945,9 +2945,12 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *vha,
 			return;
 		}
 
-		list_for_each_entry_safe(vp, tvp, &ha->vp_list, list)
+		spin_lock_irqsave(&ha->vport_slock, flags);
+		list_for_each_entry(vp, &ha->vp_list, list)
 			if (vp_idx == vp->vp_idx)
 				break;
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 		if (!vp)
 			return;
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 987c5b0ca78e..bc1a7453c5d8 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -30,6 +30,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
 {
 	uint32_t vp_id;
 	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags;
 
 	/* Find an empty slot and assign an vp_id */
 	mutex_lock(&ha->vport_lock);
@@ -44,7 +45,11 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha)
 	set_bit(vp_id, ha->vp_idx_map);
 	ha->num_vhosts++;
 	vha->vp_idx = vp_id;
+
+	spin_lock_irqsave(&ha->vport_slock, flags);
 	list_add_tail(&vha->list, &ha->vp_list);
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 	mutex_unlock(&ha->vport_lock);
 	return vp_id;
 }
@@ -54,12 +59,31 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha)
 {
 	uint16_t vp_id;
 	struct qla_hw_data *ha = vha->hw;
+	unsigned long flags = 0;
 
 	mutex_lock(&ha->vport_lock);
+	/*
+	 * Wait for all pending activities to finish before removing vport from
+	 * the list.
+	 * Lock needs to be held for safe removal from the list (it
+	 * ensures no active vp_list traversal while the vport is removed
+	 * from the queue)
+	 */
+	spin_lock_irqsave(&ha->vport_slock, flags);
+	while (atomic_read(&vha->vref_count)) {
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+
+		msleep(500);
+
+		spin_lock_irqsave(&ha->vport_slock, flags);
+	}
+	list_del(&vha->list);
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 	vp_id = vha->vp_idx;
 	ha->num_vhosts--;
 	clear_bit(vp_id, ha->vp_idx_map);
-	list_del(&vha->list);
+
 	mutex_unlock(&ha->vport_lock);
 }
 
@@ -68,12 +92,17 @@ qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
 {
 	scsi_qla_host_t *vha;
 	struct scsi_qla_host *tvha;
+	unsigned long flags;
 
+	spin_lock_irqsave(&ha->vport_slock, flags);
 	/* Locate matching device in database. */
 	list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
-		if (!memcmp(port_name, vha->port_name, WWN_SIZE))
+		if (!memcmp(port_name, vha->port_name, WWN_SIZE)) {
+			spin_unlock_irqrestore(&ha->vport_slock, flags);
 			return vha;
+		}
 	}
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
 	return NULL;
 }
 
@@ -93,6 +122,12 @@ qla24xx_find_vhost_by_name(struct qla_hw_data *ha, uint8_t *port_name)
 static void
 qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 {
+	/*
+	 * !!! NOTE !!!
+	 * This function, if called in contexts other than vp create, disable
+	 * or delete, please make sure this is synchronized with the
+	 * delete thread.
+	 */
 	fc_port_t *fcport;
 
 	list_for_each_entry(fcport, &vha->vp_fcports, list) {
@@ -194,12 +229,17 @@ qla24xx_configure_vp(scsi_qla_host_t *vha)
 void
 qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
 {
-	scsi_qla_host_t *vha, *tvha;
+	scsi_qla_host_t *vha;
 	struct qla_hw_data *ha = rsp->hw;
 	int i = 0;
+	unsigned long flags;
 
-	list_for_each_entry_safe(vha, tvha, &ha->vp_list, list) {
+	spin_lock_irqsave(&ha->vport_slock, flags);
+	list_for_each_entry(vha, &ha->vp_list, list) {
 		if (vha->vp_idx) {
+			atomic_inc(&vha->vref_count);
+			spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 			switch (mb[0]) {
 			case MBA_LIP_OCCURRED:
 			case MBA_LOOP_UP:
@@ -215,9 +255,13 @@ qla2x00_alert_all_vps(struct rsp_que *rsp, uint16_t *mb)
 				qla2x00_async_event(vha, rsp, mb);
 				break;
 			}
+
+			spin_lock_irqsave(&ha->vport_slock, flags);
+			atomic_dec(&vha->vref_count);
 		}
 		i++;
 	}
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
 }
 
 int
@@ -297,7 +341,7 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha)
 	int ret;
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *vp;
-	struct scsi_qla_host *tvp;
+	unsigned long flags = 0;
 
 	if (vha->vp_idx)
 		return;
@@ -309,10 +353,19 @@ qla2x00_do_dpc_all_vps(scsi_qla_host_t *vha)
 	if (!(ha->current_topology & ISP_CFG_F))
 		return;
 
-	list_for_each_entry_safe(vp, tvp, &ha->vp_list, list) {
-		if (vp->vp_idx)
+	spin_lock_irqsave(&ha->vport_slock, flags);
+	list_for_each_entry(vp, &ha->vp_list, list) {
+		if (vp->vp_idx) {
+			atomic_inc(&vp->vref_count);
+			spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 			ret = qla2x00_do_dpc_vp(vp);
+
+			spin_lock_irqsave(&ha->vport_slock, flags);
+			atomic_dec(&vp->vref_count);
+		}
 	}
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
 }
 
 int
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 8c80b49ac1c4..1e4bff695254 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2341,16 +2341,28 @@ probe_out:
 static void
 qla2x00_remove_one(struct pci_dev *pdev)
 {
-	scsi_qla_host_t *base_vha, *vha, *temp;
+	scsi_qla_host_t *base_vha, *vha;
 	struct qla_hw_data  *ha;
+	unsigned long flags;
 
 	base_vha = pci_get_drvdata(pdev);
 	ha = base_vha->hw;
 
-	list_for_each_entry_safe(vha, temp, &ha->vp_list, list) {
-		if (vha && vha->fc_vport)
+	spin_lock_irqsave(&ha->vport_slock, flags);
+	list_for_each_entry(vha, &ha->vp_list, list) {
+		atomic_inc(&vha->vref_count);
+
+		if (vha && vha->fc_vport) {
+			spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 			fc_vport_terminate(vha->fc_vport);
+
+			spin_lock_irqsave(&ha->vport_slock, flags);
+		}
+
+		atomic_dec(&vha->vref_count);
 	}
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 	set_bit(UNLOADING, &base_vha->dpc_flags);
 
@@ -2975,10 +2987,17 @@ static struct qla_work_evt *
 qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
 {
 	struct qla_work_evt *e;
+	uint8_t bail;
+
+	QLA_VHA_MARK_BUSY(vha, bail);
+	if (bail)
+		return NULL;
 
 	e = kzalloc(sizeof(struct qla_work_evt), GFP_ATOMIC);
-	if (!e)
+	if (!e) {
+		QLA_VHA_MARK_NOT_BUSY(vha);
 		return NULL;
+	}
 
 	INIT_LIST_HEAD(&e->list);
 	e->type = type;
@@ -3135,6 +3154,9 @@ qla2x00_do_work(struct scsi_qla_host *vha)
 		}
 		if (e->flags & QLA_EVT_FLAG_FREE)
 			kfree(e);
+
+		/* For each work completed decrement vha ref count */
+		QLA_VHA_MARK_NOT_BUSY(vha);
 	}
 }
 

From 970ee0c52a41cf27c1b5c346dd9475e9c236f3c5 Mon Sep 17 00:00:00 2001
From: Arun Easi <arun.easi@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:01 -0700
Subject: [PATCH 109/728] [SCSI] qla2xxx: make rport deletions explicit during
 vport removal

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_mid.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index bc1a7453c5d8..2b69392a71a1 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -135,7 +135,6 @@ qla2x00_mark_vp_devices_dead(scsi_qla_host_t *vha)
 		    "loop_id=0x%04x :%x\n",
 		    vha->host_no, fcport->loop_id, fcport->vp_idx));
 
-		atomic_set(&fcport->state, FCS_DEVICE_DEAD);
 		qla2x00_mark_device_lost(vha, fcport, 0, 0);
 		atomic_set(&fcport->state, FCS_UNCONFIGURED);
 	}

From efa786cc43a114d0bf2e4b95e856ea6911404d58 Mon Sep 17 00:00:00 2001
From: Lalit Chandivade <lalit.chandivade@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:02 -0700
Subject: [PATCH 110/728] [SCSI] qla2xxx: Reset seconds_since_last_heartbeat
 correctly.

The seconds_since_last_heartbeat should be checked for consecutive
heartbeat checks. Currently it could happen that seconds_since_last_heartbeat
gets set to max (2 seconds) for non-consecutive heartbeat checks.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_nx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 915b77a6e193..e54d2fa1c9f1 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3316,7 +3316,8 @@ qla82xx_check_fw_alive(scsi_qla_host_t *vha)
 				complete(&ha->mbx_intr_comp);
 			}
 		}
-	}
+	} else
+		vha->seconds_since_last_heartbeat = 0;
 	vha->fw_heartbeat_counter = fw_heartbeat_counter;
 }
 

From 4142b1987f1f8ba90589642cb74566eaff3dc2e9 Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:03 -0700
Subject: [PATCH 111/728] [SCSI] qla2xxx: Correctly set fw hung and complete
 only waiting mbx.

The fw_hung flag should be set ir-respective of if there is a
mbx command pending or not. Also the complete should be called
if there is a mbx waiting.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_nx.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index e54d2fa1c9f1..ad290dc9ba35 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -3307,13 +3307,15 @@ qla82xx_check_fw_alive(scsi_qla_host_t *vha)
 				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 			}
 			qla2xxx_wake_dpc(vha);
+			ha->flags.fw_hung = 1;
 			if (ha->flags.mbox_busy) {
-				ha->flags.fw_hung = 1;
 				ha->flags.mbox_int = 1;
 				DEBUG2(qla_printk(KERN_ERR, ha,
-				    "Due to fw hung, doing premature "
-				    "completion of mbx command\n"));
-				complete(&ha->mbx_intr_comp);
+					"Due to fw hung, doing premature "
+					"completion of mbx command\n"));
+				if (test_bit(MBX_INTR_WAIT,
+					&ha->mbx_cmd_flags))
+					complete(&ha->mbx_intr_comp);
 			}
 		}
 	} else
@@ -3419,13 +3421,15 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 				"%s(): Adapter reset needed!\n", __func__);
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
+			ha->flags.fw_hung = 1;
 			if (ha->flags.mbox_busy) {
-				ha->flags.fw_hung = 1;
 				ha->flags.mbox_int = 1;
 				DEBUG2(qla_printk(KERN_ERR, ha,
-				    "Need reset, doing premature "
-				    "completion of mbx command\n"));
-				complete(&ha->mbx_intr_comp);
+					"Need reset, doing premature "
+					"completion of mbx command\n"));
+				if (test_bit(MBX_INTR_WAIT,
+					&ha->mbx_cmd_flags))
+					complete(&ha->mbx_intr_comp);
 			}
 		} else {
 			qla82xx_check_fw_alive(vha);

From 0374f55ed882a46cd4825dde16ca2392d4c367f6 Mon Sep 17 00:00:00 2001
From: Lalit Chandivade <lalit.chandivade@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:04 -0700
Subject: [PATCH 112/728] [SCSI] qla2xxx: Cover UNDERRUN case where SCSI status
 is set.

Currently, if target sets the SCSI Status (with Check condition)
and there is no FCP residual bit set then driver  does not check
for dropped frame.  This could lead to data corruption.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_isr.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 6982ba70e12a..28f65be19dad 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1706,19 +1706,20 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt)
 				cp->result = DID_ERROR << 16;
 				break;
 			}
-		} else if (!lscsi_status) {
+		} else {
 			DEBUG2(qla_printk(KERN_INFO, ha,
 			    "scsi(%ld:%d:%d) Dropped frame(s) detected (0x%x "
 			    "of 0x%x bytes).\n", vha->host_no, cp->device->id,
 			    cp->device->lun, resid, scsi_bufflen(cp)));
 
-			cp->result = DID_ERROR << 16;
-			break;
+			cp->result = DID_ERROR << 16 | lscsi_status;
+			goto check_scsi_status;
 		}
 
 		cp->result = DID_OK << 16 | lscsi_status;
 		logit = 0;
 
+check_scsi_status:
 		/*
 		 * Check to see if SCSI Status is non zero. If so report SCSI
 		 * Status.

From 1bd58b89e84b15283aaa3148fee4969abe19af8d Mon Sep 17 00:00:00 2001
From: Giridhar Malavali <giridhar.malavali@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:05 -0700
Subject: [PATCH 113/728] [SCSI] qla2xxx: Check for empty slot in request queue
 before posting Command type 6 request.

For ISP82xx, the check for empty slot in request queue before posting command type 6
request was missing. This could lead to request queue entry corruptions causing
IO timeouts.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_nx.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index ad290dc9ba35..0a71cc71eab2 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2672,6 +2672,19 @@ qla82xx_start_scsi(srb_t *sp)
 sufficient_dsds:
 		req_cnt = 1;
 
+		if (req->cnt < (req_cnt + 2)) {
+			cnt = (uint16_t)RD_REG_DWORD_RELAXED(
+				&reg->req_q_out[0]);
+			if (req->ring_index < cnt)
+				req->cnt = cnt - req->ring_index;
+			else
+				req->cnt = req->length -
+					(req->ring_index - cnt);
+		}
+
+		if (req->cnt < (req_cnt + 2))
+			goto queuing_error;
+
 		ctx = sp->ctx = mempool_alloc(ha->ctx_mempool, GFP_ATOMIC);
 		if (!sp->ctx) {
 			DEBUG(printk(KERN_INFO

From 0fb576d8251c10f498ed4c6938aeeed8d0c93cfe Mon Sep 17 00:00:00 2001
From: Madhuranath Iyengar <madhuranath.iyengar@qlogic.com>
Date: Fri, 3 Sep 2010 14:57:06 -0700
Subject: [PATCH 114/728] [SCSI] qla2xxx: Update version number to 8.03.04-k0.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/qla2xxx/qla_version.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index e75ccb91317d..8edbccb3232d 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.03-k0"
+#define QLA2XXX_VERSION      "8.03.04-k0"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
-#define QLA_DRIVER_PATCH_VER	3
+#define QLA_DRIVER_PATCH_VER	4
 #define QLA_DRIVER_BETA_VER	0

From e260999c66768c2fccd9da8c3918b4e0e5121b3a Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 6 Sep 2010 16:48:13 +0800
Subject: [PATCH 115/728] regulator: wm831x-ldo - fix the logic to set
 REGULATOR_MODE_IDLE and REGULATOR_MODE_STANDBY modes

Problem description in current implementation:
When setting REGULATOR_MODE_IDLE mode, current implementation set
WM831X_LDO1_LP_MODE bit of ctrl_reg (which is wrong, it should clear the bit).
But due to a missing break statement for case REGULATOR_MODE_IDLE, the code
fall through to case REGULATOR_MODE_STANDBY and then clear
WM831X_LDO1_LP_MODE bit. So it still looks OK when checking the status
by wm831x_gp_ldo_get_mode().

When setting REGULATOR_MODE_STANDBY mode, it just does not work.
wm831x_gp_ldo_get_mode() will still return REGULATOR_MODE_IDLE because
the accordingly WM831X_LDO1_LP_MODE bit is clear.

Correct behavior should be:
Clear WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_IDLE mode.
Set WM831X_LDO1_LP_MODE bit of ctrl_reg for REGULATOR_MODE_STANDBY mode.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/wm831x-ldo.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
index e686cdb61b97..9edf8f692341 100644
--- a/drivers/regulator/wm831x-ldo.c
+++ b/drivers/regulator/wm831x-ldo.c
@@ -215,8 +215,7 @@ static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
 
 	case REGULATOR_MODE_IDLE:
 		ret = wm831x_set_bits(wm831x, ctrl_reg,
-				      WM831X_LDO1_LP_MODE,
-				      WM831X_LDO1_LP_MODE);
+				      WM831X_LDO1_LP_MODE, 0);
 		if (ret < 0)
 			return ret;
 
@@ -225,10 +224,12 @@ static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
 				      WM831X_LDO1_ON_MODE);
 		if (ret < 0)
 			return ret;
+		break;
 
 	case REGULATOR_MODE_STANDBY:
 		ret = wm831x_set_bits(wm831x, ctrl_reg,
-				      WM831X_LDO1_LP_MODE, 0);
+				      WM831X_LDO1_LP_MODE,
+				      WM831X_LDO1_LP_MODE);
 		if (ret < 0)
 			return ret;
 

From 8ecee36adc9d2cf19471c395af6ef70264dec251 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Mon, 6 Sep 2010 14:06:07 +0800
Subject: [PATCH 116/728] regulator: wm8350-regulator - fix the logic of
 checking REGULATOR_MODE_STANDBY mode

In wm8350_dcdc_set_mode(), we set DCx_SLEEP bit of WM8350_DCDC_SLEEP_OPTIONS
register for REGULATOR_MODE_STANDBY mode.
( DCx_SLEEP bits: 0: Normal DC-DC operation 1: Select LDO mode )

In wm8350_dcdc_get_mode(), current logic to determinate
REGULATOR_MODE_STANDBY mode is just reverse.
( sleep is set should mean REGULATOR_MODE_STANDBY mode. )

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/wm8350-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c
index 0e6ed7db9364..fe4b8a8a9dfd 100644
--- a/drivers/regulator/wm8350-regulator.c
+++ b/drivers/regulator/wm8350-regulator.c
@@ -1129,7 +1129,7 @@ static unsigned int wm8350_dcdc_get_mode(struct regulator_dev *rdev)
 			mode = REGULATOR_MODE_NORMAL;
 	} else if (!active && !sleep)
 		mode = REGULATOR_MODE_IDLE;
-	else if (!sleep)
+	else if (sleep)
 		mode = REGULATOR_MODE_STANDBY;
 
 	return mode;

From 4d155641c81203440da64c4633b4efaab75f63b3 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 7 Sep 2010 11:58:30 +0200
Subject: [PATCH 117/728] ALSA: hda - Add quirk for Lenovo T400s

Lenovo T400s requires the quirk to make automatic HP/mic switching working.

Reported-by: Frank Becker <fb@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_conexant.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 4f0619908a30..71f9d6475b09 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3094,6 +3094,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
+	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),

From 595afaf9e6ee1b48e13ec4b8bcc8c7dee888161a Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 7 Sep 2010 13:42:41 +0200
Subject: [PATCH 118/728] fuse: flush background queue on connection close

David Bartly reported that fuse can hang in fuse_get_req_nofail() when
the connection to the filesystem server is no longer active.

If bg_queue is not empty then flush_bg_queue() called from
request_end() can put more requests on to the pending queue.  If this
happens while ending requests on the processing queue then those
background requests will be queued to the pending list and never
ended.

Another problem is that fuse_dev_release() didn't wake up processes
sleeping on blocked_waitq.

Solve this by:

 a) flushing the background queue before calling end_requests() on the
    pending and processing queues

 b) setting blocked = 0 and waking up processes waiting on
    blocked_waitq()

Thanks to David for an excellent bug report.

Reported-by: David Bartley <andareed@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
---
 fs/fuse/dev.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 69ad053ffd78..b4fc47ff4bc2 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1769,6 +1769,14 @@ __acquires(&fc->lock)
 	}
 }
 
+static void end_queued_requests(struct fuse_conn *fc)
+{
+	fc->max_background = UINT_MAX;
+	flush_bg_queue(fc);
+	end_requests(fc, &fc->pending);
+	end_requests(fc, &fc->processing);
+}
+
 /*
  * Abort all requests.
  *
@@ -1795,8 +1803,7 @@ void fuse_abort_conn(struct fuse_conn *fc)
 		fc->connected = 0;
 		fc->blocked = 0;
 		end_io_requests(fc);
-		end_requests(fc, &fc->pending);
-		end_requests(fc, &fc->processing);
+		end_queued_requests(fc);
 		wake_up_all(&fc->waitq);
 		wake_up_all(&fc->blocked_waitq);
 		kill_fasync(&fc->fasync, SIGIO, POLL_IN);
@@ -1811,8 +1818,9 @@ int fuse_dev_release(struct inode *inode, struct file *file)
 	if (fc) {
 		spin_lock(&fc->lock);
 		fc->connected = 0;
-		end_requests(fc, &fc->pending);
-		end_requests(fc, &fc->processing);
+		fc->blocked = 0;
+		end_queued_requests(fc);
+		wake_up_all(&fc->blocked_waitq);
 		spin_unlock(&fc->lock);
 		fuse_conn_put(fc);
 	}

From b9ca67b2ddf021491a3741d9555e8ff59b2175ba Mon Sep 17 00:00:00 2001
From: Miklos Szeredi <mszeredi@suse.cz>
Date: Tue, 7 Sep 2010 13:42:41 +0200
Subject: [PATCH 119/728] fuse: fix lock annotations

Sparse doesn't understand lock annotations of the form
__releases(&foo->lock).  Change them to __releases(foo->lock).  Same
for __acquires().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/fuse/dev.c  | 26 ++++++++++++++------------
 fs/fuse/file.c |  8 ++++----
 2 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index b4fc47ff4bc2..d367af1514ef 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -276,7 +276,7 @@ static void flush_bg_queue(struct fuse_conn *fc)
  * Called with fc->lock, unlocks it
  */
 static void request_end(struct fuse_conn *fc, struct fuse_req *req)
-__releases(&fc->lock)
+__releases(fc->lock)
 {
 	void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
 	req->end = NULL;
@@ -306,8 +306,8 @@ __releases(&fc->lock)
 
 static void wait_answer_interruptible(struct fuse_conn *fc,
 				      struct fuse_req *req)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	if (signal_pending(current))
 		return;
@@ -325,8 +325,8 @@ static void queue_interrupt(struct fuse_conn *fc, struct fuse_req *req)
 }
 
 static void request_wait_answer(struct fuse_conn *fc, struct fuse_req *req)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	if (!fc->no_interrupt) {
 		/* Any signal may interrupt this */
@@ -905,8 +905,8 @@ static int request_pending(struct fuse_conn *fc)
 
 /* Wait until a request is available on the pending list */
 static void request_wait(struct fuse_conn *fc)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	DECLARE_WAITQUEUE(wait, current);
 
@@ -934,7 +934,7 @@ __acquires(&fc->lock)
  */
 static int fuse_read_interrupt(struct fuse_conn *fc, struct fuse_copy_state *cs,
 			       size_t nbytes, struct fuse_req *req)
-__releases(&fc->lock)
+__releases(fc->lock)
 {
 	struct fuse_in_header ih;
 	struct fuse_interrupt_in arg;
@@ -1720,8 +1720,8 @@ static unsigned fuse_dev_poll(struct file *file, poll_table *wait)
  * This function releases and reacquires fc->lock
  */
 static void end_requests(struct fuse_conn *fc, struct list_head *head)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	while (!list_empty(head)) {
 		struct fuse_req *req;
@@ -1744,8 +1744,8 @@ __acquires(&fc->lock)
  * locked).
  */
 static void end_io_requests(struct fuse_conn *fc)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	while (!list_empty(&fc->io)) {
 		struct fuse_req *req =
@@ -1770,6 +1770,8 @@ __acquires(&fc->lock)
 }
 
 static void end_queued_requests(struct fuse_conn *fc)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	fc->max_background = UINT_MAX;
 	flush_bg_queue(fc);
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 147c1f71bdb9..c8224587123f 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1144,8 +1144,8 @@ static void fuse_writepage_finish(struct fuse_conn *fc, struct fuse_req *req)
 
 /* Called under fc->lock, may release and reacquire it */
 static void fuse_send_writepage(struct fuse_conn *fc, struct fuse_req *req)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	struct fuse_inode *fi = get_fuse_inode(req->inode);
 	loff_t size = i_size_read(req->inode);
@@ -1183,8 +1183,8 @@ __acquires(&fc->lock)
  * Called with fc->lock
  */
 void fuse_flush_writepages(struct inode *inode)
-__releases(&fc->lock)
-__acquires(&fc->lock)
+__releases(fc->lock)
+__acquires(fc->lock)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_inode *fi = get_fuse_inode(inode);

From 7e443312403ad1ff40ef3177590e96d1fe747c79 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 7 Sep 2010 11:27:52 -0400
Subject: [PATCH 120/728] [SCSI] sd: fix medium-removal bug

Commit 409f3499a2cfcd1e9c2857c53af7fcce069f027f (scsi/sd: remove big
kernel lock) introduced a bug in the sd_release routine.  Medium
removal should be allowed when the number of open file references
drops to 0, not when it becomes non-zero.

This patch (as1414) adjusts the test to fix the bug.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/sd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index cd71f46a3d47..ffa0689ee840 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -870,7 +870,7 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
 
 	SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
 
-	if (atomic_dec_return(&sdkp->openers) && sdev->removable) {
+	if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
 		if (scsi_block_when_processing_errors(sdev))
 			scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
 	}

From 8d2602e0778299e2d6084f03086b716d6e7a1e1e Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 20 Aug 2010 16:44:33 +0200
Subject: [PATCH 121/728] AT91: change dma resource index

Reported-by: Dan Liang <dan.liang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 809114d5a5a6..501ac6fae2e7 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -46,7 +46,7 @@ static struct resource hdmac_resources[] = {
 		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
-	[2] = {
+	[1] = {
 		.start	= AT91SAM9G45_ID_DMA,
 		.end	= AT91SAM9G45_ID_DMA,
 		.flags	= IORESOURCE_IRQ,

From bc41606aefa8b17000619f510d5809e6c4003d65 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 7 Sep 2010 21:51:02 +0100
Subject: [PATCH 122/728] Revert "drm/i915: Enable RC6 on Ironlake."

This reverts commit ce17178094f368d9e3f39b2cb4303da5ed633dd4.

This commit has been independently bisected a few times as being the cause
of a s2ram failure.

Reported-and-tested-by: Kyle McMartin <kyle@mcmartin.ca>
Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org>
Cc: Zou Nan hai <nanhai.zou@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 40cc5da264a9..e0d1952fd3ce 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5696,8 +5696,7 @@ void intel_init_clock_gating(struct drm_device *dev)
 				   ILK_DPFC_DIS2 |
 				   ILK_CLK_FBC);
 		}
-		if (IS_GEN6(dev))
-			return;
+		return;
 	} else if (IS_G4X(dev)) {
 		uint32_t dspclk_gate;
 		I915_WRITE(RENCLK_GATE_D1, 0);
@@ -5758,11 +5757,9 @@ void intel_init_clock_gating(struct drm_device *dev)
 				OUT_RING(MI_FLUSH);
 				ADVANCE_LP_RING();
 			}
-		} else {
+		} else
 			DRM_DEBUG_KMS("Failed to allocate render context."
-				      "Disable RC6\n");
-			return;
-		}
+				       "Disable RC6\n");
 	}
 
 	if (I915_HAS_RC6(dev) && drm_core_check_feature(dev, DRIVER_MODESET)) {

From e819ff519b2d74373eca4a9a2b417ebf4c1e1b29 Mon Sep 17 00:00:00 2001
From: John Johansen <john.johansen@canonical.com>
Date: Fri, 27 Aug 2010 18:33:26 -0700
Subject: [PATCH 123/728] AppArmor: Drop hack to remove appended " (deleted)"
 string

The 2.6.36 kernel has refactored __d_path() so that it no longer appends
" (deleted)" to unlinked paths.  So drop the hack that was used to detect
and remove the appended string.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/apparmor/path.c | 38 +++++++++++---------------------------
 1 file changed, 11 insertions(+), 27 deletions(-)

diff --git a/security/apparmor/path.c b/security/apparmor/path.c
index 19358dc14605..82396050f186 100644
--- a/security/apparmor/path.c
+++ b/security/apparmor/path.c
@@ -59,8 +59,7 @@ static int d_namespace_path(struct path *path, char *buf, int buflen,
 {
 	struct path root, tmp;
 	char *res;
-	int deleted, connected;
-	int error = 0;
+	int connected, error = 0;
 
 	/* Get the root we want to resolve too, released below */
 	if (flags & PATH_CHROOT_REL) {
@@ -74,19 +73,8 @@ static int d_namespace_path(struct path *path, char *buf, int buflen,
 	}
 
 	spin_lock(&dcache_lock);
-	/* There is a race window between path lookup here and the
-	 * need to strip the " (deleted) string that __d_path applies
-	 * Detect the race and relookup the path
-	 *
-	 * The stripping of (deleted) is a hack that could be removed
-	 * with an updated __d_path
-	 */
-	do {
-		tmp = root;
-		deleted = d_unlinked(path->dentry);
-		res = __d_path(path, &tmp, buf, buflen);
-
-	} while (deleted != d_unlinked(path->dentry));
+	tmp = root;
+	res = __d_path(path, &tmp, buf, buflen);
 	spin_unlock(&dcache_lock);
 
 	*name = res;
@@ -98,21 +86,17 @@ static int d_namespace_path(struct path *path, char *buf, int buflen,
 		*name = buf;
 		goto out;
 	}
-	if (deleted) {
-		/* On some filesystems, newly allocated dentries appear to the
-		 * security_path hooks as a deleted dentry except without an
-		 * inode allocated.
-		 *
-		 * Remove the appended deleted text and return as string for
-		 * normal mediation, or auditing.  The (deleted) string is
-		 * guaranteed to be added in this case, so just strip it.
-		 */
-		buf[buflen - 11] = 0;	/* - (len(" (deleted)") +\0) */
 
-		if (path->dentry->d_inode && !(flags & PATH_MEDIATE_DELETED)) {
+	/* Handle two cases:
+	 * 1. A deleted dentry && profile is not allowing mediation of deleted
+	 * 2. On some filesystems, newly allocated dentries appear to the
+	 *    security_path hooks as a deleted dentry except without an inode
+	 *    allocated.
+	 */
+	if (d_unlinked(path->dentry) && path->dentry->d_inode &&
+	    !(flags & PATH_MEDIATE_DELETED)) {
 			error = -ENOENT;
 			goto out;
-		}
 	}
 
 	/* Determine if the path is connected to the expected root */

From 3a2dc8382a3e85a51ed9c6f57ea80665ea7a0c95 Mon Sep 17 00:00:00 2001
From: John Johansen <john.johansen@canonical.com>
Date: Mon, 6 Sep 2010 10:10:20 -0700
Subject: [PATCH 124/728] AppArmor: Fix security_task_setrlimit logic for
 2.6.36 changes

2.6.36 introduced the abilitiy to specify the task that is having its
rlimits set.  Update mediation to ensure that confined tasks can only
set their own group_leader as expected by current policy.

Add TODO note about extending policy to support setting other tasks
rlimits.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/apparmor/include/resource.h |  4 ++--
 security/apparmor/lsm.c              |  2 +-
 security/apparmor/resource.c         | 20 ++++++++++++--------
 3 files changed, 15 insertions(+), 11 deletions(-)

diff --git a/security/apparmor/include/resource.h b/security/apparmor/include/resource.h
index 3c88be946494..02baec732bb5 100644
--- a/security/apparmor/include/resource.h
+++ b/security/apparmor/include/resource.h
@@ -33,8 +33,8 @@ struct aa_rlimit {
 };
 
 int aa_map_resource(int resource);
-int aa_task_setrlimit(struct aa_profile *profile, unsigned int resource,
-		      struct rlimit *new_rlim);
+int aa_task_setrlimit(struct aa_profile *profile, struct task_struct *,
+		      unsigned int resource, struct rlimit *new_rlim);
 
 void __aa_transition_rlimits(struct aa_profile *old, struct aa_profile *new);
 
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index f73e2c204218..cf1de4462ccd 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -614,7 +614,7 @@ static int apparmor_task_setrlimit(struct task_struct *task,
 	int error = 0;
 
 	if (!unconfined(profile))
-		error = aa_task_setrlimit(profile, resource, new_rlim);
+		error = aa_task_setrlimit(profile, task, resource, new_rlim);
 
 	return error;
 }
diff --git a/security/apparmor/resource.c b/security/apparmor/resource.c
index 4a368f1fd36d..a4136c10b1c6 100644
--- a/security/apparmor/resource.c
+++ b/security/apparmor/resource.c
@@ -72,6 +72,7 @@ int aa_map_resource(int resource)
 /**
  * aa_task_setrlimit - test permission to set an rlimit
  * @profile - profile confining the task  (NOT NULL)
+ * @task - task the resource is being set on
  * @resource - the resource being set
  * @new_rlim - the new resource limit  (NOT NULL)
  *
@@ -79,18 +80,21 @@ int aa_map_resource(int resource)
  *
  * Returns: 0 or error code if setting resource failed
  */
-int aa_task_setrlimit(struct aa_profile *profile, unsigned int resource,
-		      struct rlimit *new_rlim)
+int aa_task_setrlimit(struct aa_profile *profile, struct task_struct *task,
+		      unsigned int resource, struct rlimit *new_rlim)
 {
 	int error = 0;
 
-	if (profile->rlimits.mask & (1 << resource) &&
-	    new_rlim->rlim_max > profile->rlimits.limits[resource].rlim_max)
+	/* TODO: extend resource control to handle other (non current)
+	 * processes.  AppArmor rules currently have the implicit assumption
+	 * that the task is setting the resource of the current process
+	 */
+	if ((task != current->group_leader) ||
+	    (profile->rlimits.mask & (1 << resource) &&
+	     new_rlim->rlim_max > profile->rlimits.limits[resource].rlim_max))
+		error = -EACCES;
 
-		error = audit_resource(profile, resource, new_rlim->rlim_max,
-			-EACCES);
-
-	return error;
+	return audit_resource(profile, resource, new_rlim->rlim_max, error);
 }
 
 /**

From 04ccd53f09741c4bc54ab36db000bc1383e4812e Mon Sep 17 00:00:00 2001
From: John Johansen <john.johansen@canonical.com>
Date: Fri, 27 Aug 2010 18:33:28 -0700
Subject: [PATCH 125/728] AppArmor: Fix splitting an fqname into separate
 namespace and profile names

As per Dan Carpenter <error27@gmail.com>
  If we have a ns name without a following profile then in the original
  code it did "*ns_name = &name[1];".  "name" is NULL so "*ns_name" is
  0x1.  That isn't useful and could cause an oops when this function is
  called from aa_remove_profiles().

Beyond this the assignment of the namespace name was wrong in the case
where the profile name was provided as it was being set to &name[1]
after name  = skip_spaces(split + 1);

Move the ns_name assignment before updating name for the split and
also add skip_spaces, making the interface more robust.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/apparmor/lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/apparmor/lib.c b/security/apparmor/lib.c
index 6e85cdb4303f..506d2baf6147 100644
--- a/security/apparmor/lib.c
+++ b/security/apparmor/lib.c
@@ -40,6 +40,7 @@ char *aa_split_fqname(char *fqname, char **ns_name)
 	*ns_name = NULL;
 	if (name[0] == ':') {
 		char *split = strchr(&name[1], ':');
+		*ns_name = skip_spaces(&name[1]);
 		if (split) {
 			/* overwrite ':' with \0 */
 			*split = 0;
@@ -47,7 +48,6 @@ char *aa_split_fqname(char *fqname, char **ns_name)
 		} else
 			/* a ns name without a following profile is allowed */
 			name = NULL;
-		*ns_name = &name[1];
 	}
 	if (name && *name == 0)
 		name = NULL;

From 999b4f0aa2314b76857775334cb94bafa053db64 Mon Sep 17 00:00:00 2001
From: John Johansen <john.johansen@canonical.com>
Date: Fri, 27 Aug 2010 18:33:29 -0700
Subject: [PATCH 126/728] AppArmor: Fix locking from removal of profile
 namespace

The locking for profile namespace removal is wrong, when removing a
profile namespace, it needs to be removed from its parent's list.
Lock the parent of namespace list instead of the namespace being removed.

Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/apparmor/policy.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
index 3cdc1ad0787e..52cc865f1464 100644
--- a/security/apparmor/policy.c
+++ b/security/apparmor/policy.c
@@ -1151,12 +1151,14 @@ ssize_t aa_remove_profiles(char *fqname, size_t size)
 		/* released below */
 		ns = aa_get_namespace(root);
 
-	write_lock(&ns->lock);
 	if (!name) {
 		/* remove namespace - can only happen if fqname[0] == ':' */
+		write_lock(&ns->parent->lock);
 		__remove_namespace(ns);
+		write_unlock(&ns->parent->lock);
 	} else {
 		/* remove profile */
+		write_lock(&ns->lock);
 		profile = aa_get_profile(__lookup_profile(&ns->base, name));
 		if (!profile) {
 			error = -ENOENT;
@@ -1165,8 +1167,8 @@ ssize_t aa_remove_profiles(char *fqname, size_t size)
 		}
 		name = profile->base.hname;
 		__remove_profile(profile);
+		write_unlock(&ns->lock);
 	}
-	write_unlock(&ns->lock);
 
 	/* don't fail removal if audit fails */
 	(void) audit_policy(OP_PROF_RM, GFP_KERNEL, name, info, error);

From e950598d43dce8d97e7d5270808393425d1e5cbd Mon Sep 17 00:00:00 2001
From: Mimi Zohar <zohar@linux.vnet.ibm.com>
Date: Tue, 31 Aug 2010 09:38:51 -0400
Subject: [PATCH 127/728] ima: always maintain counters

commit 8262bb85da allocated the inode integrity struct (iint) before any
inodes were created. Only after IMA was initialized in late_initcall were
the counters updated. This patch updates the counters, whether or not IMA
has been initialized, to resolve 'imbalance' messages.

This patch fixes the bug as reported in bugzilla: 15673.  When the i915
is builtin, the ring_buffer is initialized before IMA, causing the
imbalance message on suspend.

Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Thomas Meyer <thomas@m3y3r.de>
Tested-by: David Safford<safford@watson.ibm.com>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/integrity/ima/ima.h      | 1 +
 security/integrity/ima/ima_iint.c | 4 +++-
 security/integrity/ima/ima_main.c | 8 +++++---
 3 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
index 16d100d3fc38..3fbcd1dda0ef 100644
--- a/security/integrity/ima/ima.h
+++ b/security/integrity/ima/ima.h
@@ -35,6 +35,7 @@ enum tpm_pcrs { TPM_PCR0 = 0, TPM_PCR8 = 8 };
 #define IMA_MEASURE_HTABLE_SIZE (1 << IMA_HASH_BITS)
 
 /* set during initialization */
+extern int iint_initialized;
 extern int ima_initialized;
 extern int ima_used_chip;
 extern char *ima_hash;
diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c
index 7625b85c2274..afba4aef812f 100644
--- a/security/integrity/ima/ima_iint.c
+++ b/security/integrity/ima/ima_iint.c
@@ -22,9 +22,10 @@
 
 RADIX_TREE(ima_iint_store, GFP_ATOMIC);
 DEFINE_SPINLOCK(ima_iint_lock);
-
 static struct kmem_cache *iint_cache __read_mostly;
 
+int iint_initialized = 0;
+
 /* ima_iint_find_get - return the iint associated with an inode
  *
  * ima_iint_find_get gets a reference to the iint. Caller must
@@ -141,6 +142,7 @@ static int __init ima_iintcache_init(void)
 	iint_cache =
 	    kmem_cache_create("iint_cache", sizeof(struct ima_iint_cache), 0,
 			      SLAB_PANIC, init_once);
+	iint_initialized = 1;
 	return 0;
 }
 security_initcall(ima_iintcache_init);
diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index f93641382e9f..e662b89d4079 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -148,12 +148,14 @@ void ima_counts_get(struct file *file)
 	struct ima_iint_cache *iint;
 	int rc;
 
-	if (!ima_initialized || !S_ISREG(inode->i_mode))
+	if (!iint_initialized || !S_ISREG(inode->i_mode))
 		return;
 	iint = ima_iint_find_get(inode);
 	if (!iint)
 		return;
 	mutex_lock(&iint->mutex);
+	if (!ima_initialized)
+		goto out;
 	rc = ima_must_measure(iint, inode, MAY_READ, FILE_CHECK);
 	if (rc < 0)
 		goto out;
@@ -213,7 +215,7 @@ void ima_file_free(struct file *file)
 	struct inode *inode = file->f_dentry->d_inode;
 	struct ima_iint_cache *iint;
 
-	if (!ima_initialized || !S_ISREG(inode->i_mode))
+	if (!iint_initialized || !S_ISREG(inode->i_mode))
 		return;
 	iint = ima_iint_find_get(inode);
 	if (!iint)
@@ -230,7 +232,7 @@ static int process_measurement(struct file *file, const unsigned char *filename,
 {
 	struct inode *inode = file->f_dentry->d_inode;
 	struct ima_iint_cache *iint;
-	int rc;
+	int rc = 0;
 
 	if (!ima_initialized || !S_ISREG(inode->i_mode))
 		return 0;

From dc696aced9f09f05b1f927b93f5a7918017a3e49 Mon Sep 17 00:00:00 2001
From: Sunil Mushran <sunil.mushran@oracle.com>
Date: Thu, 12 Aug 2010 16:24:25 -0700
Subject: [PATCH 128/728] ocfs2: Fix metaecc error messages

Like tools, the checksum validate function now prints the values in hex.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/blockcheck.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/blockcheck.c b/fs/ocfs2/blockcheck.c
index ec6d12339593..c7ee03c22226 100644
--- a/fs/ocfs2/blockcheck.c
+++ b/fs/ocfs2/blockcheck.c
@@ -439,7 +439,7 @@ int ocfs2_block_check_validate(void *data, size_t blocksize,
 
 	ocfs2_blockcheck_inc_failure(stats);
 	mlog(ML_ERROR,
-	     "CRC32 failed: stored: %u, computed %u.  Applying ECC.\n",
+	     "CRC32 failed: stored: 0x%x, computed 0x%x. Applying ECC.\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
 
 	/* Ok, try ECC fixups */
@@ -453,7 +453,7 @@ int ocfs2_block_check_validate(void *data, size_t blocksize,
 		goto out;
 	}
 
-	mlog(ML_ERROR, "Fixed CRC32 failed: stored: %u, computed %u\n",
+	mlog(ML_ERROR, "Fixed CRC32 failed: stored: 0x%x, computed 0x%x\n",
 	     (unsigned int)check.bc_crc32e, (unsigned int)crc);
 
 	rc = -EIO;

From f5ce5a08a40f2086435858ddc80cb40394b082eb Mon Sep 17 00:00:00 2001
From: Sunil Mushran <sunil.mushran@oracle.com>
Date: Thu, 12 Aug 2010 16:24:26 -0700
Subject: [PATCH 129/728] ocfs2: Fix incorrect checksum validation error

For local mounts, ocfs2_read_locked_inode() calls ocfs2_read_blocks_sync() to
read the inode off the disk. The latter first checks to see if that block is
cached in the journal, and, if so, returns that block. That is ok.

But ocfs2_read_locked_inode() goes wrong when it tries to validate the checksum
of such blocks. Blocks that are cached in the journal may not have had their
checksum computed as yet. We should not validate the checksums of such blocks.

Fixes ossbz#1282
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1282

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Singed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/inode.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index 0492464916b1..eece3e05d9d0 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -488,7 +488,11 @@ static int ocfs2_read_locked_inode(struct inode *inode,
 						     OCFS2_BH_IGNORE_CACHE);
 	} else {
 		status = ocfs2_read_blocks_sync(osb, args->fi_blkno, 1, &bh);
-		if (!status)
+		/*
+		 * If buffer is in jbd, then its checksum may not have been
+		 * computed as yet.
+		 */
+		if (!status && !buffer_jbd(bh))
 			status = ocfs2_validate_inode_block(osb->sb, bh);
 	}
 	if (status < 0) {

From f63afdb2c32db850fa1bfccf84643a8885cbeb61 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Sat, 17 Jul 2010 21:45:49 +0800
Subject: [PATCH 130/728] ocfs2: make __ocfs2_page_mkwrite handle file end
 properly.

__ocfs2_page_mkwrite now is broken in handling file end.
1. the last page should be the page contains i_size - 1.
2. the len in the last page is also calculated wrong.
So change them accordingly.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/mmap.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c
index af2b8fe1f139..4c18f4ad93b4 100644
--- a/fs/ocfs2/mmap.c
+++ b/fs/ocfs2/mmap.c
@@ -74,9 +74,11 @@ static int __ocfs2_page_mkwrite(struct inode *inode, struct buffer_head *di_bh,
 	/*
 	 * Another node might have truncated while we were waiting on
 	 * cluster locks.
+	 * We don't check size == 0 before the shift. This is borrowed
+	 * from do_generic_file_read.
 	 */
-	last_index = size >> PAGE_CACHE_SHIFT;
-	if (page->index > last_index) {
+	last_index = (size - 1) >> PAGE_CACHE_SHIFT;
+	if (unlikely(!size || page->index > last_index)) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -107,7 +109,7 @@ static int __ocfs2_page_mkwrite(struct inode *inode, struct buffer_head *di_bh,
 	 * because the "write" would invalidate their data.
 	 */
 	if (page->index == last_index)
-		len = size & ~PAGE_CACHE_MASK;
+		len = ((size - 1) & ~PAGE_CACHE_MASK) + 1;
 
 	ret = ocfs2_write_begin_nolock(mapping, pos, len, 0, &locked_page,
 				       &fsdata, di_bh, page);

From 04eda1a18019bb387dc7e97ee99979dd88dc608a Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Thu, 5 Aug 2010 20:32:45 +0200
Subject: [PATCH 131/728] ocfs2: Flush drive's caches on fdatasync

When 'barrier' mount option is specified, we have to issue a cache flush
during fdatasync(2). We have to do this even if inode doesn't have
I_DIRTY_DATASYNC set because we still have to get written *data* to disk so
that they are not lost in case of crash.

Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Singed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/file.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 81296b4e3646..6b2be0f2eacd 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -36,6 +36,7 @@
 #include <linux/writeback.h>
 #include <linux/falloc.h>
 #include <linux/quotaops.h>
+#include <linux/blkdev.h>
 
 #define MLOG_MASK_PREFIX ML_INODE
 #include <cluster/masklog.h>
@@ -190,8 +191,16 @@ static int ocfs2_sync_file(struct file *file, int datasync)
 	if (err)
 		goto bail;
 
-	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC))
+	if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) {
+		/*
+		 * We still have to flush drive's caches to get data to the
+		 * platter
+		 */
+		if (osb->s_mount_opt & OCFS2_MOUNT_BARRIER)
+			blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL,
+					   NULL, BLKDEV_IFL_WAIT);
 		goto bail;
+	}
 
 	journal = osb->journal->j_journal;
 	err = jbd2_journal_force_commit(journal);

From 889f004a8c83d515f275078687f859bc0d5ede9d Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Thu, 2 Sep 2010 13:10:10 +0800
Subject: [PATCH 132/728] ocfs2: Use the right group in nfs sync check.

We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.

The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/suballoc.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index a8e6a95a353f..8a009ee1f7fd 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -2567,7 +2567,8 @@ out:
  * suballoc_bit.
  */
 static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno,
-				       u16 *suballoc_slot, u16 *suballoc_bit)
+				       u16 *suballoc_slot, u64 *group_blkno,
+				       u16 *suballoc_bit)
 {
 	int status;
 	struct buffer_head *inode_bh = NULL;
@@ -2604,6 +2605,8 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno,
 		*suballoc_slot = le16_to_cpu(inode_fe->i_suballoc_slot);
 	if (suballoc_bit)
 		*suballoc_bit = le16_to_cpu(inode_fe->i_suballoc_bit);
+	if (group_blkno)
+		*group_blkno = le64_to_cpu(inode_fe->i_suballoc_loc);
 
 bail:
 	brelse(inode_bh);
@@ -2621,7 +2624,8 @@ bail:
  */
 static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
 				   struct inode *suballoc,
-				   struct buffer_head *alloc_bh, u64 blkno,
+				   struct buffer_head *alloc_bh,
+				   u64 group_blkno, u64 blkno,
 				   u16 bit, int *res)
 {
 	struct ocfs2_dinode *alloc_di;
@@ -2642,10 +2646,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
 		goto bail;
 	}
 
-	if (alloc_di->i_suballoc_loc)
-		bg_blkno = le64_to_cpu(alloc_di->i_suballoc_loc);
-	else
-		bg_blkno = ocfs2_which_suballoc_group(blkno, bit);
+	bg_blkno = group_blkno ? group_blkno :
+		   ocfs2_which_suballoc_group(blkno, bit);
 	status = ocfs2_read_group_descriptor(suballoc, alloc_di, bg_blkno,
 					     &group_bh);
 	if (status < 0) {
@@ -2680,6 +2682,7 @@ bail:
 int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
 {
 	int status;
+	u64 group_blkno = 0;
 	u16 suballoc_bit = 0, suballoc_slot = 0;
 	struct inode *inode_alloc_inode;
 	struct buffer_head *alloc_bh = NULL;
@@ -2687,7 +2690,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
 	mlog_entry("blkno: %llu", (unsigned long long)blkno);
 
 	status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot,
-					     &suballoc_bit);
+					     &group_blkno, &suballoc_bit);
 	if (status < 0) {
 		mlog(ML_ERROR, "get alloc slot and bit failed %d\n", status);
 		goto bail;
@@ -2715,7 +2718,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
 	}
 
 	status = ocfs2_test_suballoc_bit(osb, inode_alloc_inode, alloc_bh,
-					 blkno, suballoc_bit, res);
+					 group_blkno, blkno, suballoc_bit, res);
 	if (status < 0)
 		mlog(ML_ERROR, "test suballoc bit failed %d\n", status);
 

From b2b6ebf5f740e015b2155343958f067e594323ea Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Thu, 26 Aug 2010 13:06:50 -0700
Subject: [PATCH 133/728] ocfs2: properly set and use inode group alloc hint

We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno.  Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.

Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/suballoc.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index 8a009ee1f7fd..b93d7e72175a 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -62,6 +62,17 @@ struct ocfs2_suballoc_result {
 	unsigned int	sr_bits;	/* How many bits we claimed */
 };
 
+static u64 ocfs2_group_from_res(struct ocfs2_suballoc_result *res)
+{
+	if (res->sr_blkno == 0)
+		return 0;
+
+	if (res->sr_bg_blkno)
+		return res->sr_bg_blkno;
+
+	return ocfs2_which_suballoc_group(res->sr_blkno, res->sr_bit_offset);
+}
+
 static inline void ocfs2_debug_bg(struct ocfs2_group_desc *bg);
 static inline void ocfs2_debug_suballoc_inode(struct ocfs2_dinode *fe);
 static inline u16 ocfs2_find_victim_chain(struct ocfs2_chain_list *cl);
@@ -1845,6 +1856,7 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
 	int status;
 	u16 victim, i;
 	u16 bits_left = 0;
+	u64 hint = ac->ac_last_group;
 	struct ocfs2_chain_list *cl;
 	struct ocfs2_dinode *fe;
 
@@ -1872,7 +1884,7 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
 		goto bail;
 	}
 
-	res->sr_bg_blkno = ac->ac_last_group;
+	res->sr_bg_blkno = hint;
 	if (res->sr_bg_blkno) {
 		/* Attempt to short-circuit the usual search mechanism
 		 * by jumping straight to the most recently used
@@ -1896,8 +1908,10 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
 
 	status = ocfs2_search_chain(ac, handle, bits_wanted, min_bits,
 				    res, &bits_left);
-	if (!status)
+	if (!status) {
+		hint = ocfs2_group_from_res(res);
 		goto set_hint;
+	}
 	if (status < 0 && status != -ENOSPC) {
 		mlog_errno(status);
 		goto bail;
@@ -1920,8 +1934,10 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac,
 		ac->ac_chain = i;
 		status = ocfs2_search_chain(ac, handle, bits_wanted, min_bits,
 					    res, &bits_left);
-		if (!status)
+		if (!status) {
+			hint = ocfs2_group_from_res(res);
 			break;
+		}
 		if (status < 0 && status != -ENOSPC) {
 			mlog_errno(status);
 			goto bail;
@@ -1936,7 +1952,7 @@ set_hint:
 		if (bits_left < min_bits)
 			ac->ac_last_group = 0;
 		else
-			ac->ac_last_group = res->sr_bg_blkno;
+			ac->ac_last_group = hint;
 	}
 
 bail:

From 9b4c0ff32ccd87ab52d4c5bd0a0536febce11370 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Tue, 24 Aug 2010 14:28:03 +0200
Subject: [PATCH 134/728] ocfs2: Fix deadlock when allocating page

We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/alloc.c        | 2 +-
 fs/ocfs2/file.c         | 2 +-
 fs/ocfs2/refcounttree.c | 5 +++--
 3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 215e12ce1d85..592fae5007d1 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -6672,7 +6672,7 @@ int ocfs2_grab_pages(struct inode *inode, loff_t start, loff_t end,
 	last_page_bytes = PAGE_ALIGN(end);
 	index = start >> PAGE_CACHE_SHIFT;
 	do {
-		pages[numpages] = grab_cache_page(mapping, index);
+		pages[numpages] = find_or_create_page(mapping, index, GFP_NOFS);
 		if (!pages[numpages]) {
 			ret = -ENOMEM;
 			mlog_errno(ret);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 6b2be0f2eacd..2caa3a7a1a39 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -783,7 +783,7 @@ static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
 	BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
 	BUG_ON(abs_from & (inode->i_blkbits - 1));
 
-	page = grab_cache_page(mapping, index);
+	page = find_or_create_page(mapping, index, GFP_NOFS);
 	if (!page) {
 		ret = -ENOMEM;
 		mlog_errno(ret);
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 73a11ccfd4c2..0afeda83120f 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -2960,7 +2960,7 @@ static int ocfs2_duplicate_clusters_by_page(handle_t *handle,
 		if (map_end & (PAGE_CACHE_SIZE - 1))
 			to = map_end & (PAGE_CACHE_SIZE - 1);
 
-		page = grab_cache_page(mapping, page_index);
+		page = find_or_create_page(mapping, page_index, GFP_NOFS);
 
 		/*
 		 * In case PAGE_CACHE_SIZE <= CLUSTER_SIZE, This page
@@ -3179,7 +3179,8 @@ static int ocfs2_cow_sync_writeback(struct super_block *sb,
 		if (map_end > end)
 			map_end = end;
 
-		page = grab_cache_page(context->inode->i_mapping, page_index);
+		page = find_or_create_page(context->inode->i_mapping,
+					   page_index, GFP_NOFS);
 		BUG_ON(!page);
 
 		wait_on_page_writeback(page);

From 81c8c82b5a39f9127e8b239e9b406a6c3a41b228 Mon Sep 17 00:00:00 2001
From: Tristan Ye <tristan.ye@oracle.com>
Date: Thu, 19 Aug 2010 15:15:00 +0800
Subject: [PATCH 135/728] Ocfs2: Fix a regression bug from mainline
 commit(6b933c8e6f1a2f3118082c455eef25f9b1ac7b45).

The patch is to fix the regression bug brought from commit 6b933c8...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285

The commit 6b933c8e6f1a2f3118082c455eef25f9b1ac7b45 changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to  flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.

This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/file.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 2caa3a7a1a39..9a03c151b5ce 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -2338,7 +2338,7 @@ out_dio:
 	BUG_ON(ret == -EIOCBQUEUED && !(file->f_flags & O_DIRECT));
 
 	if (((file->f_flags & O_DSYNC) && !direct_io) || IS_SYNC(inode) ||
-	    ((file->f_flags & O_DIRECT) && has_refcount)) {
+	    ((file->f_flags & O_DIRECT) && !direct_io)) {
 		ret = filemap_fdatawrite_range(file->f_mapping, pos,
 					       pos + count - 1);
 		if (ret < 0)

From 021960cab320ae3cc4e9aba9cca42f9f5ce785f3 Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Fri, 13 Aug 2010 15:15:15 -0700
Subject: [PATCH 136/728] ocfs2: split out inode alloc code from
 ocfs2_mknod_locked

Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/namei.c | 55 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 37 insertions(+), 18 deletions(-)

diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index f171b51a74f7..2aa66b695fab 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -472,32 +472,23 @@ leave:
 	return status;
 }
 
-static int ocfs2_mknod_locked(struct ocfs2_super *osb,
-			      struct inode *dir,
-			      struct inode *inode,
-			      dev_t dev,
-			      struct buffer_head **new_fe_bh,
-			      struct buffer_head *parent_fe_bh,
-			      handle_t *handle,
-			      struct ocfs2_alloc_context *inode_ac)
+static int __ocfs2_mknod_locked(struct inode *dir,
+				struct inode *inode,
+				dev_t dev,
+				struct buffer_head **new_fe_bh,
+				struct buffer_head *parent_fe_bh,
+				handle_t *handle,
+				struct ocfs2_alloc_context *inode_ac,
+				u64 fe_blkno, u64 suballoc_loc, u16 suballoc_bit)
 {
 	int status = 0;
+	struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
 	struct ocfs2_dinode *fe = NULL;
 	struct ocfs2_extent_list *fel;
-	u64 suballoc_loc, fe_blkno = 0;
-	u16 suballoc_bit;
 	u16 feat;
 
 	*new_fe_bh = NULL;
 
-	status = ocfs2_claim_new_inode(handle, dir, parent_fe_bh,
-				       inode_ac, &suballoc_loc,
-				       &suballoc_bit, &fe_blkno);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
-	}
-
 	/* populate as many fields early on as possible - many of
 	 * these are used by the support functions here and in
 	 * callers. */
@@ -591,6 +582,34 @@ leave:
 	return status;
 }
 
+static int ocfs2_mknod_locked(struct ocfs2_super *osb,
+			      struct inode *dir,
+			      struct inode *inode,
+			      dev_t dev,
+			      struct buffer_head **new_fe_bh,
+			      struct buffer_head *parent_fe_bh,
+			      handle_t *handle,
+			      struct ocfs2_alloc_context *inode_ac)
+{
+	int status = 0;
+	u64 suballoc_loc, fe_blkno = 0;
+	u16 suballoc_bit;
+
+	*new_fe_bh = NULL;
+
+	status = ocfs2_claim_new_inode(handle, dir, parent_fe_bh,
+				       inode_ac, &suballoc_loc,
+				       &suballoc_bit, &fe_blkno);
+	if (status < 0) {
+		mlog_errno(status);
+		return status;
+	}
+
+	return __ocfs2_mknod_locked(dir, inode, dev, new_fe_bh,
+				    parent_fe_bh, handle, inode_ac,
+				    fe_blkno, suballoc_loc, suballoc_bit);
+}
+
 static int ocfs2_mkdir(struct inode *dir,
 		       struct dentry *dentry,
 		       int mode)

From d51349829c378c06ba4aa7d4b16ca23739858608 Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Fri, 13 Aug 2010 15:15:16 -0700
Subject: [PATCH 137/728] ocfs2: use ocfs2_alloc_dinode_update_counts() instead
 of open coding

ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/suballoc.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index b93d7e72175a..e7edda8c6a11 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -1719,7 +1719,6 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 {
 	int status;
 	u16 chain;
-	u32 tmp_used;
 	u64 next_group;
 	struct inode *alloc_inode = ac->ac_inode;
 	struct buffer_head *group_bh = NULL;
@@ -1807,22 +1806,14 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 		}
 	}
 
-	/* Ok, claim our bits now: set the info on dinode, chainlist
-	 * and then the group */
-	status = ocfs2_journal_access_di(handle,
-					 INODE_CACHE(alloc_inode),
-					 ac->ac_bh,
-					 OCFS2_JOURNAL_ACCESS_WRITE);
-	if (status < 0) {
+	status = ocfs2_alloc_dinode_update_counts(alloc_inode, handle,
+						  ac->ac_bh, res->sr_bits,
+						  chain);
+	if (status) {
 		mlog_errno(status);
 		goto bail;
 	}
 
-	tmp_used = le32_to_cpu(fe->id1.bitmap1.i_used);
-	fe->id1.bitmap1.i_used = cpu_to_le32(res->sr_bits + tmp_used);
-	le32_add_cpu(&cl->cl_recs[chain].c_free, -res->sr_bits);
-	ocfs2_journal_dirty(handle, ac->ac_bh);
-
 	status = ocfs2_block_group_set_bits(handle,
 					    alloc_inode,
 					    bg,

From e49e27674d1dd2717ad90b21ece8f83102153315 Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Fri, 13 Aug 2010 15:15:17 -0700
Subject: [PATCH 138/728] ocfs2: allow return of new inode block location
 before allocation of the inode

This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir).  Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/suballoc.c | 159 ++++++++++++++++++++++++++++++++++++++++++++
 fs/ocfs2/suballoc.h |  21 ++++++
 2 files changed, 180 insertions(+)

diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index e7edda8c6a11..8a286f54dca1 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -57,6 +57,12 @@ struct ocfs2_suballoc_result {
 	u64		sr_bg_blkno;	/* The bg we allocated from.  Set
 					   to 0 when a block group is
 					   contiguous. */
+	u64		sr_bg_stable_blkno; /*
+					     * Doesn't change, always
+					     * set to target block
+					     * group descriptor
+					     * block.
+					     */
 	u64		sr_blkno;	/* The first allocated block */
 	unsigned int	sr_bit_offset;	/* The bit in the bg */
 	unsigned int	sr_bits;	/* How many bits we claimed */
@@ -149,6 +155,10 @@ void ocfs2_free_ac_resource(struct ocfs2_alloc_context *ac)
 	brelse(ac->ac_bh);
 	ac->ac_bh = NULL;
 	ac->ac_resv = NULL;
+	if (ac->ac_find_loc_priv) {
+		kfree(ac->ac_find_loc_priv);
+		ac->ac_find_loc_priv = NULL;
+	}
 }
 
 void ocfs2_free_alloc_context(struct ocfs2_alloc_context *ac)
@@ -1689,6 +1699,15 @@ static int ocfs2_search_one_group(struct ocfs2_alloc_context *ac,
 	if (!ret)
 		ocfs2_bg_discontig_fix_result(ac, gd, res);
 
+	/*
+	 * sr_bg_blkno might have been changed by
+	 * ocfs2_bg_discontig_fix_result
+	 */
+	res->sr_bg_stable_blkno = group_bh->b_blocknr;
+
+	if (ac->ac_find_loc_only)
+		goto out_loc_only;
+
 	ret = ocfs2_alloc_dinode_update_counts(alloc_inode, handle, ac->ac_bh,
 					       res->sr_bits,
 					       le16_to_cpu(gd->bg_chain));
@@ -1702,6 +1721,7 @@ static int ocfs2_search_one_group(struct ocfs2_alloc_context *ac,
 	if (ret < 0)
 		mlog_errno(ret);
 
+out_loc_only:
 	*bits_left = le16_to_cpu(gd->bg_free_bits_count);
 
 out:
@@ -1780,6 +1800,11 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 	if (!status)
 		ocfs2_bg_discontig_fix_result(ac, bg, res);
 
+	/*
+	 * sr_bg_blkno might have been changed by
+	 * ocfs2_bg_discontig_fix_result
+	 */
+	res->sr_bg_stable_blkno = group_bh->b_blocknr;
 
 	/*
 	 * Keep track of previous block descriptor read. When
@@ -1806,6 +1831,9 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 		}
 	}
 
+	if (ac->ac_find_loc_only)
+		goto out_loc_only;
+
 	status = ocfs2_alloc_dinode_update_counts(alloc_inode, handle,
 						  ac->ac_bh, res->sr_bits,
 						  chain);
@@ -1828,6 +1856,7 @@ static int ocfs2_search_chain(struct ocfs2_alloc_context *ac,
 	mlog(0, "Allocated %u bits from suballocator %llu\n", res->sr_bits,
 	     (unsigned long long)le64_to_cpu(fe->i_blkno));
 
+out_loc_only:
 	*bits_left = le16_to_cpu(bg->bg_free_bits_count);
 bail:
 	brelse(group_bh);
@@ -2023,6 +2052,136 @@ static inline void ocfs2_save_inode_ac_group(struct inode *dir,
 	OCFS2_I(dir)->ip_last_used_slot = ac->ac_alloc_slot;
 }
 
+int ocfs2_find_new_inode_loc(struct inode *dir,
+			     struct buffer_head *parent_fe_bh,
+			     struct ocfs2_alloc_context *ac,
+			     u64 *fe_blkno)
+{
+	int ret;
+	handle_t *handle = NULL;
+	struct ocfs2_suballoc_result *res;
+
+	BUG_ON(!ac);
+	BUG_ON(ac->ac_bits_given != 0);
+	BUG_ON(ac->ac_bits_wanted != 1);
+	BUG_ON(ac->ac_which != OCFS2_AC_USE_INODE);
+
+	res = kzalloc(sizeof(*res), GFP_NOFS);
+	if (res == NULL) {
+		ret = -ENOMEM;
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ocfs2_init_inode_ac_group(dir, parent_fe_bh, ac);
+
+	/*
+	 * The handle started here is for chain relink. Alternatively,
+	 * we could just disable relink for these calls.
+	 */
+	handle = ocfs2_start_trans(OCFS2_SB(dir->i_sb), OCFS2_SUBALLOC_ALLOC);
+	if (IS_ERR(handle)) {
+		ret = PTR_ERR(handle);
+		handle = NULL;
+		mlog_errno(ret);
+		goto out;
+	}
+
+	/*
+	 * This will instruct ocfs2_claim_suballoc_bits and
+	 * ocfs2_search_one_group to search but save actual allocation
+	 * for later.
+	 */
+	ac->ac_find_loc_only = 1;
+
+	ret = ocfs2_claim_suballoc_bits(ac, handle, 1, 1, res);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ac->ac_find_loc_priv = res;
+	*fe_blkno = res->sr_blkno;
+
+out:
+	if (handle)
+		ocfs2_commit_trans(OCFS2_SB(dir->i_sb), handle);
+
+	if (ret)
+		kfree(res);
+
+	return ret;
+}
+
+int ocfs2_claim_new_inode_at_loc(handle_t *handle,
+				 struct inode *dir,
+				 struct ocfs2_alloc_context *ac,
+				 u64 *suballoc_loc,
+				 u16 *suballoc_bit,
+				 u64 di_blkno)
+{
+	int ret;
+	u16 chain;
+	struct ocfs2_suballoc_result *res = ac->ac_find_loc_priv;
+	struct buffer_head *bg_bh = NULL;
+	struct ocfs2_group_desc *bg;
+	struct ocfs2_dinode *di = (struct ocfs2_dinode *) ac->ac_bh->b_data;
+
+	/*
+	 * Since di_blkno is being passed back in, we check for any
+	 * inconsistencies which may have happened between
+	 * calls. These are code bugs as di_blkno is not expected to
+	 * change once returned from ocfs2_find_new_inode_loc()
+	 */
+	BUG_ON(res->sr_blkno != di_blkno);
+
+	ret = ocfs2_read_group_descriptor(ac->ac_inode, di,
+					  res->sr_bg_stable_blkno, &bg_bh);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	bg = (struct ocfs2_group_desc *) bg_bh->b_data;
+	chain = le16_to_cpu(bg->bg_chain);
+
+	ret = ocfs2_alloc_dinode_update_counts(ac->ac_inode, handle,
+					       ac->ac_bh, res->sr_bits,
+					       chain);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_block_group_set_bits(handle,
+					 ac->ac_inode,
+					 bg,
+					 bg_bh,
+					 res->sr_bit_offset,
+					 res->sr_bits);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	mlog(0, "Allocated %u bits from suballocator %llu\n", res->sr_bits,
+	     (unsigned long long)di_blkno);
+
+	atomic_inc(&OCFS2_SB(ac->ac_inode->i_sb)->alloc_stats.bg_allocs);
+
+	BUG_ON(res->sr_bits != 1);
+
+	*suballoc_loc = res->sr_bg_blkno;
+	*suballoc_bit = res->sr_bit_offset;
+	ac->ac_bits_given++;
+	ocfs2_save_inode_ac_group(dir, ac);
+
+out:
+	brelse(bg_bh);
+
+	return ret;
+}
+
 int ocfs2_claim_new_inode(handle_t *handle,
 			  struct inode *dir,
 			  struct buffer_head *parent_fe_bh,
diff --git a/fs/ocfs2/suballoc.h b/fs/ocfs2/suballoc.h
index a017dd3ee7d9..b8afabfeede4 100644
--- a/fs/ocfs2/suballoc.h
+++ b/fs/ocfs2/suballoc.h
@@ -56,6 +56,9 @@ struct ocfs2_alloc_context {
 	u64    ac_max_block;  /* Highest block number to allocate. 0 is
 				 is the same as ~0 - unlimited */
 
+	int    ac_find_loc_only;  /* hack for reflink operation ordering */
+	struct ocfs2_suballoc_result *ac_find_loc_priv; /* */
+
 	struct ocfs2_alloc_reservation	*ac_resv;
 };
 
@@ -197,4 +200,22 @@ int ocfs2_lock_allocators(struct inode *inode, struct ocfs2_extent_tree *et,
 			  struct ocfs2_alloc_context **meta_ac);
 
 int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res);
+
+
+
+/*
+ * The following two interfaces are for ocfs2_create_inode_in_orphan().
+ */
+int ocfs2_find_new_inode_loc(struct inode *dir,
+			     struct buffer_head *parent_fe_bh,
+			     struct ocfs2_alloc_context *ac,
+			     u64 *fe_blkno);
+
+int ocfs2_claim_new_inode_at_loc(handle_t *handle,
+				 struct inode *dir,
+				 struct ocfs2_alloc_context *ac,
+				 u64 *suballoc_loc,
+				 u16 *suballoc_bit,
+				 u64 di_blkno);
+
 #endif /* _CHAINALLOC_H_ */

From dd43bcde23c527f64897eef41aa1fed2c9905ea9 Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Fri, 13 Aug 2010 15:15:18 -0700
Subject: [PATCH 139/728] ocfs2: split out ocfs2_prepare_orphan_dir() into
 locking and prep functions

We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/namei.c | 130 +++++++++++++++++++++++++++++++++--------------
 1 file changed, 93 insertions(+), 37 deletions(-)

diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 2aa66b695fab..54c629855357 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -1871,61 +1871,117 @@ bail:
 	return status;
 }
 
+static int ocfs2_lookup_lock_orphan_dir(struct ocfs2_super *osb,
+					struct inode **ret_orphan_dir,
+					struct buffer_head **ret_orphan_dir_bh)
+{
+	struct inode *orphan_dir_inode;
+	struct buffer_head *orphan_dir_bh = NULL;
+	int ret = 0;
+
+	orphan_dir_inode = ocfs2_get_system_file_inode(osb,
+						       ORPHAN_DIR_SYSTEM_INODE,
+						       osb->slot_num);
+	if (!orphan_dir_inode) {
+		ret = -ENOENT;
+		mlog_errno(ret);
+		return ret;
+	}
+
+	mutex_lock(&orphan_dir_inode->i_mutex);
+
+	ret = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1);
+	if (ret < 0) {
+		mutex_unlock(&orphan_dir_inode->i_mutex);
+		iput(orphan_dir_inode);
+
+		mlog_errno(ret);
+		return ret;
+	}
+
+	*ret_orphan_dir = orphan_dir_inode;
+	*ret_orphan_dir_bh = orphan_dir_bh;
+
+	return 0;
+}
+
+static int __ocfs2_prepare_orphan_dir(struct inode *orphan_dir_inode,
+				      struct buffer_head *orphan_dir_bh,
+				      u64 blkno,
+				      char *name,
+				      struct ocfs2_dir_lookup_result *lookup)
+{
+	int ret;
+	struct ocfs2_super *osb = OCFS2_SB(orphan_dir_inode->i_sb);
+
+	ret = ocfs2_blkno_stringify(blkno, name);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
+	}
+
+	ret = ocfs2_prepare_dir_for_insert(osb, orphan_dir_inode,
+					   orphan_dir_bh, name,
+					   OCFS2_ORPHAN_NAMELEN, lookup);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ocfs2_prepare_orphan_dir() - Prepare an orphan directory for
+ * insertion of an orphan.
+ * @osb: ocfs2 file system
+ * @ret_orphan_dir: Orphan dir inode - returned locked!
+ * @blkno: Actual block number of the inode to be inserted into orphan dir.
+ * @lookup: dir lookup result, to be passed back into functions like
+ *          ocfs2_orphan_add
+ *
+ * Returns zero on success and the ret_orphan_dir, name and lookup
+ * fields will be populated.
+ *
+ * Returns non-zero on failure. 
+ */
 static int ocfs2_prepare_orphan_dir(struct ocfs2_super *osb,
 				    struct inode **ret_orphan_dir,
 				    u64 blkno,
 				    char *name,
 				    struct ocfs2_dir_lookup_result *lookup)
 {
-	struct inode *orphan_dir_inode;
+	struct inode *orphan_dir_inode = NULL;
 	struct buffer_head *orphan_dir_bh = NULL;
-	int status = 0;
+	int ret = 0;
 
-	status = ocfs2_blkno_stringify(blkno, name);
-	if (status < 0) {
-		mlog_errno(status);
-		return status;
+	ret = ocfs2_lookup_lock_orphan_dir(osb, &orphan_dir_inode,
+					   &orphan_dir_bh);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
 	}
 
-	orphan_dir_inode = ocfs2_get_system_file_inode(osb,
-						       ORPHAN_DIR_SYSTEM_INODE,
-						       osb->slot_num);
-	if (!orphan_dir_inode) {
-		status = -ENOENT;
-		mlog_errno(status);
-		return status;
-	}
-
-	mutex_lock(&orphan_dir_inode->i_mutex);
-
-	status = ocfs2_inode_lock(orphan_dir_inode, &orphan_dir_bh, 1);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
-	}
-
-	status = ocfs2_prepare_dir_for_insert(osb, orphan_dir_inode,
-					      orphan_dir_bh, name,
-					      OCFS2_ORPHAN_NAMELEN, lookup);
-	if (status < 0) {
-		ocfs2_inode_unlock(orphan_dir_inode, 1);
-
-		mlog_errno(status);
-		goto leave;
+	ret = __ocfs2_prepare_orphan_dir(orphan_dir_inode, orphan_dir_bh,
+					 blkno, name, lookup);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
 	}
 
 	*ret_orphan_dir = orphan_dir_inode;
 
-leave:
-	if (status) {
+out:
+	brelse(orphan_dir_bh);
+
+	if (ret) {
+		ocfs2_inode_unlock(orphan_dir_inode, 1);
 		mutex_unlock(&orphan_dir_inode->i_mutex);
 		iput(orphan_dir_inode);
 	}
 
-	brelse(orphan_dir_bh);
-
-	mlog_exit(status);
-	return status;
+	mlog_exit(ret);
+	return ret;
 }
 
 static int ocfs2_orphan_add(struct ocfs2_super *osb,

From 97b8f4a9dfd932997677136e11980eb2fafea91d Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Fri, 13 Aug 2010 15:15:19 -0700
Subject: [PATCH 140/728] ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan

ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.

We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:

       /*
        * We give the orphan dir the root blkno to fake an orphan name,
        * and allocate enough space for our insertion.
        */
       status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
                                         osb->root_blkno,
                                         orphan_name, &orphan_insert);

Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index.  When it has that index, the above code fails
to allocate the proper index entry.  Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.

To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
---
 fs/ocfs2/namei.c | 127 +++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 107 insertions(+), 20 deletions(-)

diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 54c629855357..a00dda2e4f16 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -2128,6 +2128,99 @@ leave:
 	return status;
 }
 
+/**
+ * ocfs2_prep_new_orphaned_file() - Prepare the orphan dir to recieve a newly
+ * allocated file. This is different from the typical 'add to orphan dir'
+ * operation in that the inode does not yet exist. This is a problem because
+ * the orphan dir stringifies the inode block number to come up with it's
+ * dirent. Obviously if the inode does not yet exist we have a chicken and egg
+ * problem. This function works around it by calling deeper into the orphan
+ * and suballoc code than other callers. Use this only by necessity.
+ * @dir: The directory which this inode will ultimately wind up under - not the
+ * orphan dir!
+ * @dir_bh: buffer_head the @dir inode block
+ * @orphan_name: string of length (CFS2_ORPHAN_NAMELEN + 1). Will be filled
+ * with the string to be used for orphan dirent. Pass back to the orphan dir
+ * code.
+ * @ret_orphan_dir: orphan dir inode returned to be passed back into orphan
+ * dir code.
+ * @ret_di_blkno: block number where the new inode will be allocated.
+ * @orphan_insert: Dir insert context to be passed back into orphan dir code.
+ * @ret_inode_ac: Inode alloc context to be passed back to the allocator.
+ *
+ * Returns zero on success and the ret_orphan_dir, name and lookup
+ * fields will be populated.
+ *
+ * Returns non-zero on failure. 
+ */
+static int ocfs2_prep_new_orphaned_file(struct inode *dir,
+					struct buffer_head *dir_bh,
+					char *orphan_name,
+					struct inode **ret_orphan_dir,
+					u64 *ret_di_blkno,
+					struct ocfs2_dir_lookup_result *orphan_insert,
+					struct ocfs2_alloc_context **ret_inode_ac)
+{
+	int ret;
+	u64 di_blkno;
+	struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
+	struct inode *orphan_dir = NULL;
+	struct buffer_head *orphan_dir_bh = NULL;
+	struct ocfs2_alloc_context *inode_ac = NULL;
+
+	ret = ocfs2_lookup_lock_orphan_dir(osb, &orphan_dir, &orphan_dir_bh);
+	if (ret < 0) {
+		mlog_errno(ret);
+		return ret;
+	}
+
+	/* reserve an inode spot */
+	ret = ocfs2_reserve_new_inode(osb, &inode_ac);
+	if (ret < 0) {
+		if (ret != -ENOSPC)
+			mlog_errno(ret);
+		goto out;
+	}
+
+	ret = ocfs2_find_new_inode_loc(dir, dir_bh, inode_ac,
+				       &di_blkno);
+	if (ret) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+	ret = __ocfs2_prepare_orphan_dir(orphan_dir, orphan_dir_bh,
+					 di_blkno, orphan_name, orphan_insert);
+	if (ret < 0) {
+		mlog_errno(ret);
+		goto out;
+	}
+
+out:
+	if (ret == 0) {
+		*ret_orphan_dir = orphan_dir;
+		*ret_di_blkno = di_blkno;
+		*ret_inode_ac = inode_ac;
+		/*
+		 * orphan_name and orphan_insert are already up to
+		 * date via prepare_orphan_dir
+		 */
+	} else {
+		/* Unroll reserve_new_inode* */
+		if (inode_ac)
+			ocfs2_free_alloc_context(inode_ac);
+
+		/* Unroll orphan dir locking */
+		mutex_unlock(&orphan_dir->i_mutex);
+		ocfs2_inode_unlock(orphan_dir, 1);
+		iput(orphan_dir);
+	}
+
+	brelse(orphan_dir_bh);
+
+	return 0;
+}
+
 int ocfs2_create_inode_in_orphan(struct inode *dir,
 				 int mode,
 				 struct inode **new_inode)
@@ -2143,6 +2236,8 @@ int ocfs2_create_inode_in_orphan(struct inode *dir,
 	struct buffer_head *new_di_bh = NULL;
 	struct ocfs2_alloc_context *inode_ac = NULL;
 	struct ocfs2_dir_lookup_result orphan_insert = { NULL, };
+	u64 uninitialized_var(di_blkno), suballoc_loc;
+	u16 suballoc_bit;
 
 	status = ocfs2_inode_lock(dir, &parent_di_bh, 1);
 	if (status < 0) {
@@ -2151,20 +2246,9 @@ int ocfs2_create_inode_in_orphan(struct inode *dir,
 		return status;
 	}
 
-	/*
-	 * We give the orphan dir the root blkno to fake an orphan name,
-	 * and allocate enough space for our insertion.
-	 */
-	status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
-					  osb->root_blkno,
-					  orphan_name, &orphan_insert);
-	if (status < 0) {
-		mlog_errno(status);
-		goto leave;
-	}
-
-	/* reserve an inode spot */
-	status = ocfs2_reserve_new_inode(osb, &inode_ac);
+	status = ocfs2_prep_new_orphaned_file(dir, parent_di_bh,
+					      orphan_name, &orphan_dir,
+					      &di_blkno, &orphan_insert, &inode_ac);
 	if (status < 0) {
 		if (status != -ENOSPC)
 			mlog_errno(status);
@@ -2191,17 +2275,20 @@ int ocfs2_create_inode_in_orphan(struct inode *dir,
 		goto leave;
 	did_quota_inode = 1;
 
-	inode->i_nlink = 0;
-	/* do the real work now. */
-	status = ocfs2_mknod_locked(osb, dir, inode,
-				    0, &new_di_bh, parent_di_bh, handle,
-				    inode_ac);
+	status = ocfs2_claim_new_inode_at_loc(handle, dir, inode_ac,
+					      &suballoc_loc,
+					      &suballoc_bit, di_blkno);
 	if (status < 0) {
 		mlog_errno(status);
 		goto leave;
 	}
 
-	status = ocfs2_blkno_stringify(OCFS2_I(inode)->ip_blkno, orphan_name);
+	inode->i_nlink = 0;
+	/* do the real work now. */
+	status = __ocfs2_mknod_locked(dir, inode,
+				      0, &new_di_bh, parent_di_bh, handle,
+				      inode_ac, di_blkno, suballoc_loc,
+				      suballoc_bit);
 	if (status < 0) {
 		mlog_errno(status);
 		goto leave;

From 4c25b93223340deff73381cc47f9244fb379a74d Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 7 Sep 2010 13:37:10 +0200
Subject: [PATCH 141/728] ALSA: virtuoso: work around missing reset in the
 Xonar DS Windows driver

For the WM8776 chip, this driver uses a different sample format and
more features than the Windows driver.  When rebooting from Linux into
Windows, the latter driver does not reset the chip but assumes all its
registers have their default settings, so we get garbled sound or, if
the output happened to be muted before rebooting, no sound.

To make that driver happy, hook our driver's cleanup function into the
shutdown notifier and ensure that the chip gets reset.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Nathan Schagen
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/oxygen/oxygen.h       |  1 +
 sound/pci/oxygen/oxygen_lib.c   | 21 ++++++++++++++++++---
 sound/pci/oxygen/virtuoso.c     |  1 +
 sound/pci/oxygen/xonar_wm87x6.c |  1 +
 4 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/sound/pci/oxygen/oxygen.h b/sound/pci/oxygen/oxygen.h
index 6147216af744..a3409edcfb50 100644
--- a/sound/pci/oxygen/oxygen.h
+++ b/sound/pci/oxygen/oxygen.h
@@ -155,6 +155,7 @@ void oxygen_pci_remove(struct pci_dev *pci);
 int oxygen_pci_suspend(struct pci_dev *pci, pm_message_t state);
 int oxygen_pci_resume(struct pci_dev *pci);
 #endif
+void oxygen_pci_shutdown(struct pci_dev *pci);
 
 /* oxygen_mixer.c */
 
diff --git a/sound/pci/oxygen/oxygen_lib.c b/sound/pci/oxygen/oxygen_lib.c
index fad03d64e3ad..7e93cf884437 100644
--- a/sound/pci/oxygen/oxygen_lib.c
+++ b/sound/pci/oxygen/oxygen_lib.c
@@ -519,16 +519,21 @@ static void oxygen_init(struct oxygen *chip)
 	}
 }
 
-static void oxygen_card_free(struct snd_card *card)
+static void oxygen_shutdown(struct oxygen *chip)
 {
-	struct oxygen *chip = card->private_data;
-
 	spin_lock_irq(&chip->reg_lock);
 	chip->interrupt_mask = 0;
 	chip->pcm_running = 0;
 	oxygen_write16(chip, OXYGEN_DMA_STATUS, 0);
 	oxygen_write16(chip, OXYGEN_INTERRUPT_MASK, 0);
 	spin_unlock_irq(&chip->reg_lock);
+}
+
+static void oxygen_card_free(struct snd_card *card)
+{
+	struct oxygen *chip = card->private_data;
+
+	oxygen_shutdown(chip);
 	if (chip->irq >= 0)
 		free_irq(chip->irq, chip);
 	flush_scheduled_work();
@@ -778,3 +783,13 @@ int oxygen_pci_resume(struct pci_dev *pci)
 }
 EXPORT_SYMBOL(oxygen_pci_resume);
 #endif /* CONFIG_PM */
+
+void oxygen_pci_shutdown(struct pci_dev *pci)
+{
+	struct snd_card *card = pci_get_drvdata(pci);
+	struct oxygen *chip = card->private_data;
+
+	oxygen_shutdown(chip);
+	chip->model.cleanup(chip);
+}
+EXPORT_SYMBOL(oxygen_pci_shutdown);
diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index f03a2f2cffee..06c863e86e3d 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -95,6 +95,7 @@ static struct pci_driver xonar_driver = {
 	.suspend = oxygen_pci_suspend,
 	.resume = oxygen_pci_resume,
 #endif
+	.shutdown = oxygen_pci_shutdown,
 };
 
 static int __init alsa_card_xonar_init(void)
diff --git a/sound/pci/oxygen/xonar_wm87x6.c b/sound/pci/oxygen/xonar_wm87x6.c
index dbc4b89d74e4..0b89932fb8c4 100644
--- a/sound/pci/oxygen/xonar_wm87x6.c
+++ b/sound/pci/oxygen/xonar_wm87x6.c
@@ -193,6 +193,7 @@ static void xonar_ds_init(struct oxygen *chip)
 static void xonar_ds_cleanup(struct oxygen *chip)
 {
 	xonar_disable_output(chip);
+	wm8776_write(chip, WM8776_RESET, 0);
 }
 
 static void xonar_ds_suspend(struct oxygen *chip)

From fe6ce80ae25953d95ebaf9bce27b585218cda25c Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 7 Sep 2010 13:38:49 +0200
Subject: [PATCH 142/728] ALSA: virtuoso: fix setting of Xonar DS
 line-in/mic-in controls

The Line and Mic inputs cannot be used at the same time, so the driver
has to automatically disable one of them if both are set.  However, it
forgot to notify userspace about this change, so the mixer state would
be inconsistent.  To fix this, check if the other control gets muted,
and send a notification event in this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Reported-and-tested-by: Nathan Schagen
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/oxygen/xonar_wm87x6.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/sound/pci/oxygen/xonar_wm87x6.c b/sound/pci/oxygen/xonar_wm87x6.c
index 0b89932fb8c4..b82c1cfa96f5 100644
--- a/sound/pci/oxygen/xonar_wm87x6.c
+++ b/sound/pci/oxygen/xonar_wm87x6.c
@@ -53,6 +53,8 @@ struct xonar_wm87x6 {
 	struct xonar_generic generic;
 	u16 wm8776_regs[0x17];
 	u16 wm8766_regs[0x10];
+	struct snd_kcontrol *line_adcmux_control;
+	struct snd_kcontrol *mic_adcmux_control;
 	struct snd_kcontrol *lc_controls[13];
 };
 
@@ -604,6 +606,7 @@ static int wm8776_input_mux_put(struct snd_kcontrol *ctl,
 {
 	struct oxygen *chip = ctl->private_data;
 	struct xonar_wm87x6 *data = chip->model_data;
+	struct snd_kcontrol *other_ctl;
 	unsigned int mux_bit = ctl->private_value;
 	u16 reg;
 	int changed;
@@ -611,8 +614,18 @@ static int wm8776_input_mux_put(struct snd_kcontrol *ctl,
 	mutex_lock(&chip->mutex);
 	reg = data->wm8776_regs[WM8776_ADCMUX];
 	if (value->value.integer.value[0]) {
-		reg &= ~0x003;
 		reg |= mux_bit;
+		/* line-in and mic-in are exclusive */
+		mux_bit ^= 3;
+		if (reg & mux_bit) {
+			reg &= ~mux_bit;
+			if (mux_bit == 1)
+				other_ctl = data->line_adcmux_control;
+			else
+				other_ctl = data->mic_adcmux_control;
+			snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
+				       &other_ctl->id);
+		}
 	} else
 		reg &= ~mux_bit;
 	changed = reg != data->wm8776_regs[WM8776_ADCMUX];
@@ -964,7 +977,13 @@ static int xonar_ds_mixer_init(struct oxygen *chip)
 		err = snd_ctl_add(chip->card, ctl);
 		if (err < 0)
 			return err;
+		if (!strcmp(ctl->id.name, "Line Capture Switch"))
+			data->line_adcmux_control = ctl;
+		else if (!strcmp(ctl->id.name, "Mic Capture Switch"))
+			data->mic_adcmux_control = ctl;
 	}
+	if (!data->line_adcmux_control || !data->mic_adcmux_control)
+		return -ENXIO;
 	BUILD_BUG_ON(ARRAY_SIZE(lc_controls) != ARRAY_SIZE(data->lc_controls));
 	for (i = 0; i < ARRAY_SIZE(lc_controls); ++i) {
 		ctl = snd_ctl_new1(&lc_controls[i], chip);

From 76195fb096ca6db2f8bbaffb96e3025aaf1649a0 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 8 Sep 2010 08:27:02 +0200
Subject: [PATCH 143/728] ALSA: usb - Release capture substream URBs properly

Due to the wrong "return" in the loop, a capture substream won't be
released at disconnection properly if the device is capture only and has
no playback substream.  This caused Oops occasionally at the device
reconnection.

Reported-by: Kim Minhyoung <minhyoung.kim@lge.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/card.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/usb/card.c b/sound/usb/card.c
index 32e4be8a187c..4eabafa5b037 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -126,7 +126,7 @@ static void snd_usb_stream_disconnect(struct list_head *head)
 	for (idx = 0; idx < 2; idx++) {
 		subs = &as->substream[idx];
 		if (!subs->num_formats)
-			return;
+			continue;
 		snd_usb_release_substream_urbs(subs, 1);
 		subs->interface = -1;
 	}

From a769cbcf60cee51f4431c0938acd39e7e5b76b8d Mon Sep 17 00:00:00 2001
From: Brian Austin <brian.austin@cirrus.com>
Date: Tue, 7 Sep 2010 14:36:22 -0500
Subject: [PATCH 144/728] ALSA: hda - Add errata initverb sequence for CS42xx
 codecs

Add init verb sequence for errata ER880C3
http://www.cirrus.com/en/pubs/errata/ER880C3.pdf

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_cirrus.c | 50 ++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 4ef5efaaaef1..488fd9ade1ba 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -972,6 +972,53 @@ static struct hda_verb cs_coef_init_verbs[] = {
 	{} /* terminator */
 };
 
+/* Errata: CS4207 rev C0/C1/C2 Silicon
+ *
+ * http://www.cirrus.com/en/pubs/errata/ER880C3.pdf
+ *
+ * 6. At high temperature (TA > +85°C), the digital supply current (IVD)
+ * may be excessive (up to an additional 200 μA), which is most easily
+ * observed while the part is being held in reset (RESET# active low).
+ *
+ * Root Cause: At initial powerup of the device, the logic that drives
+ * the clock and write enable to the S/PDIF SRC RAMs is not properly
+ * initialized.
+ * Certain random patterns will cause a steady leakage current in those
+ * RAM cells. The issue will resolve once the SRCs are used (turned on).
+ *
+ * Workaround: The following verb sequence briefly turns on the S/PDIF SRC
+ * blocks, which will alleviate the issue.
+ */
+
+static struct hda_verb cs_errata_init_verbs[] = {
+	{0x01, AC_VERB_SET_POWER_STATE, 0x00}, /* AFG: D0 */
+	{0x11, AC_VERB_SET_PROC_STATE, 0x01},  /* VPW: processing on */
+
+	{0x11, AC_VERB_SET_COEF_INDEX, 0x0008},
+	{0x11, AC_VERB_SET_PROC_COEF, 0x9999},
+	{0x11, AC_VERB_SET_COEF_INDEX, 0x0017},
+	{0x11, AC_VERB_SET_PROC_COEF, 0xa412},
+	{0x11, AC_VERB_SET_COEF_INDEX, 0x0001},
+	{0x11, AC_VERB_SET_PROC_COEF, 0x0009},
+
+	{0x07, AC_VERB_SET_POWER_STATE, 0x00}, /* S/PDIF Rx: D0 */
+	{0x08, AC_VERB_SET_POWER_STATE, 0x00}, /* S/PDIF Tx: D0 */
+
+	{0x11, AC_VERB_SET_COEF_INDEX, 0x0017},
+	{0x11, AC_VERB_SET_PROC_COEF, 0x2412},
+	{0x11, AC_VERB_SET_COEF_INDEX, 0x0008},
+	{0x11, AC_VERB_SET_PROC_COEF, 0x0000},
+	{0x11, AC_VERB_SET_COEF_INDEX, 0x0001},
+	{0x11, AC_VERB_SET_PROC_COEF, 0x0008},
+	{0x11, AC_VERB_SET_PROC_STATE, 0x00},
+
+	{0x07, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Rx: D3 */
+	{0x08, AC_VERB_SET_POWER_STATE, 0x03}, /* S/PDIF Tx: D3 */
+	/*{0x01, AC_VERB_SET_POWER_STATE, 0x03},*/ /* AFG: D3 This is already handled */
+
+	{} /* terminator */
+};
+
 /* SPDIF setup */
 static void init_digital(struct hda_codec *codec)
 {
@@ -991,6 +1038,9 @@ static int cs_init(struct hda_codec *codec)
 {
 	struct cs_spec *spec = codec->spec;
 
+	/* init_verb sequence for C0/C1/C2 errata*/
+	snd_hda_sequence_write(codec, cs_errata_init_verbs);
+
 	snd_hda_sequence_write(codec, cs_coef_init_verbs);
 
 	if (spec->gpio_mask) {

From 080dc7bc2562615a5be0a705a9d1a8c24eb198d4 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 8 Sep 2010 08:38:41 +0200
Subject: [PATCH 145/728] ALSA: hda - Enable PC-beep for EeePC with ALC269
 codec

EeePC 1001HAG has a similar problem like other ASUS machine, which doesn't
set the codec SSID properly for indicating the beep capability.
To enable PC-beep again, put this to the whitelist.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 627bf9963368..bcbf9160ed81 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -5334,6 +5334,7 @@ static void fillup_priv_adc_nids(struct hda_codec *codec, hda_nid_t *nids,
 
 static struct snd_pci_quirk beep_white_list[] = {
 	SND_PCI_QUIRK(0x1043, 0x829f, "ASUS", 1),
+	SND_PCI_QUIRK(0x1043, 0x83ce, "EeePC", 1),
 	SND_PCI_QUIRK(0x8086, 0xd613, "Intel", 1),
 	{}
 };

From 12e8ba25ef52f19e7a42e61aecb3c1fef83b2a82 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 7 Sep 2010 23:39:28 +0100
Subject: [PATCH 146/728] Revert "drm/i915: Allow LVDS on pipe A on gen4+"

This reverts commit 0f3ee801b332d6ff22285386675fe5aaedf035c3.

Enabling LVDS on pipe A was causing excessive wakeups on otherwise idle
systems due to i915 interrupts. So restrict the LVDS to pipe B once more,
whilst the issue is properly diagnosed.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16307
Reported-and-tested-by: Enrico Bandiello <enban@postal.uv.es>
Poked-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Adam Jackson <ajax@redhat.com>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/intel_lvds.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index b819c1081147..4fbb0165b26f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -875,8 +875,6 @@ void intel_lvds_init(struct drm_device *dev)
 
 	intel_encoder->clone_mask = (1 << INTEL_LVDS_CLONE_BIT);
 	intel_encoder->crtc_mask = (1 << 1);
-	if (IS_I965G(dev))
-		intel_encoder->crtc_mask |= (1 << 0);
 	drm_encoder_helper_add(encoder, &intel_lvds_helper_funcs);
 	drm_connector_helper_add(connector, &intel_lvds_connector_helper_funcs);
 	connector->display_info.subpixel_order = SubPixelHorizontalRGB;

From e4ee8dd8afcbcbe502fa8a3d3af6eb09c96dd806 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 8 Sep 2010 09:58:12 +0200
Subject: [PATCH 147/728] ALSA: msnd-classic: Fix invalid cfg parameter

The driver doesn't probe the device properly because of left-over cfg[]
that isn't used at all for msnd-classic device.  This is only for msnd-
pinnacle.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/isa/msnd/msnd_pinnacle.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c
index 5f3e68401f90..91d6023a63e5 100644
--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -764,9 +764,9 @@ static long io[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
 static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
 static long mem[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
 
+#ifndef MSND_CLASSIC
 static long cfg[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
 
-#ifndef MSND_CLASSIC
 /* Extra Peripheral Configuration (Default: Disable) */
 static long ide_io0[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
 static long ide_io1[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
@@ -894,7 +894,11 @@ static int __devinit snd_msnd_isa_probe(struct device *pdev, unsigned int idx)
 	struct snd_card *card;
 	struct snd_msnd *chip;
 
-	if (has_isapnp(idx) || cfg[idx] == SNDRV_AUTO_PORT) {
+	if (has_isapnp(idx)
+#ifndef MSND_CLASSIC
+	    || cfg[idx] == SNDRV_AUTO_PORT
+#endif
+	    ) {
 		printk(KERN_INFO LOGNAME ": Assuming PnP mode\n");
 		return -ENODEV;
 	}

From c3add4b63438555d5e88c5893d238ab80d1f5959 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed, 8 Sep 2010 09:14:08 +0100
Subject: [PATCH 148/728] Revert "drm/i915: Warn if we run out of FIFO space
 for a mode"

This reverts commit b9421ae8f30958deea98d71477b4a77a066856b4.

This warning was so prelevant, even for apparently working machines,
that it was just causing fear, anxiety and panic.

The root cause still remains, so we will add some better debugging when
we focus on fixing it.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=17021
Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e0d1952fd3ce..7c9103030036 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2767,14 +2767,8 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
 	/* Don't promote wm_size to unsigned... */
 	if (wm_size > (long)wm->max_wm)
 		wm_size = wm->max_wm;
-	if (wm_size <= 0) {
+	if (wm_size <= 0)
 		wm_size = wm->default_wm;
-		DRM_ERROR("Insufficient FIFO for plane, expect flickering:"
-			  " entries required = %ld, available = %lu.\n",
-			  entries_required + wm->guard_size,
-			  wm->fifo_size);
-	}
-
 	return wm_size;
 }
 

From 27f7ad53829f79e799a253285318bff79ece15bd Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Mon, 6 Sep 2010 09:13:45 +0200
Subject: [PATCH 149/728] ALSA: seq/oss - Fix double-free at error path of
 snd_seq_oss_open()

The error handling in snd_seq_oss_open() has several bad codes that
do dereferecing released pointers and double-free of kmalloc'ed data.
The object dp is release in free_devinfo() that is called via
private_free callback.  The rest shouldn't touch this object any more.

The patch changes delete_port() to call kfree() in any case, and gets
rid of unnecessary calls of destructors in snd_seq_oss_open().

Fixes CVE-2010-3080.

Reported-and-tested-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/seq/oss/seq_oss_init.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/sound/core/seq/oss/seq_oss_init.c b/sound/core/seq/oss/seq_oss_init.c
index 685712276ac9..69cd7b3c362d 100644
--- a/sound/core/seq/oss/seq_oss_init.c
+++ b/sound/core/seq/oss/seq_oss_init.c
@@ -281,13 +281,10 @@ snd_seq_oss_open(struct file *file, int level)
 	return 0;
 
  _error:
-	snd_seq_oss_writeq_delete(dp->writeq);
-	snd_seq_oss_readq_delete(dp->readq);
 	snd_seq_oss_synth_cleanup(dp);
 	snd_seq_oss_midi_cleanup(dp);
-	delete_port(dp);
 	delete_seq_queue(dp->queue);
-	kfree(dp);
+	delete_port(dp);
 
 	return rc;
 }
@@ -350,8 +347,10 @@ create_port(struct seq_oss_devinfo *dp)
 static int
 delete_port(struct seq_oss_devinfo *dp)
 {
-	if (dp->port < 0)
+	if (dp->port < 0) {
+		kfree(dp);
 		return 0;
+	}
 
 	debug_printk(("delete_port %i\n", dp->port));
 	return snd_seq_event_port_detach(dp->cseq, dp->port);

From 1d220334d6a8a711149234dc5f98d34ae02226b8 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <cbouatmailru@gmail.com>
Date: Wed, 8 Sep 2010 00:10:26 +0400
Subject: [PATCH 150/728] apm_power: Add missing break statement

The missing break statement causes wrong capacity calculation for
batteries that report energy.

Reported-by: d binderman <dcb314@hotmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
---
 drivers/power/apm_power.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/power/apm_power.c b/drivers/power/apm_power.c
index 936bae560fa1..dc628cb2e762 100644
--- a/drivers/power/apm_power.c
+++ b/drivers/power/apm_power.c
@@ -233,6 +233,7 @@ static int calculate_capacity(enum apm_source source)
 		empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
 		now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
 		avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+		break;
 	case SOURCE_VOLTAGE:
 		full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
 		empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;

From 0485e18bc4112a3b548baa314c24bfbece4d156b Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 5 Sep 2010 12:19:50 +0100
Subject: [PATCH 151/728] Revert "[ARM] pxa: remove now unnecessary
 dma_needs_bounce()"

This reverts commit 4fa5518, which causes a compilation regression for
IXP4xx platforms.

Reported-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/it8152.c           | 8 ++++++++
 arch/arm/include/asm/dma-mapping.h | 8 --------
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 6c0913562455..7974baacafce 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -263,6 +263,14 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
 	return 0;
 }
 
+int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
+		__func__, dma_addr, size);
+	return (dev->bus == &pci_bus_type) &&
+		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index c226fe10553e..c568da7dcae4 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -288,15 +288,7 @@ extern void dmabounce_unregister_dev(struct device *);
  * DMA access and 1 if the buffer needs to be bounced.
  *
  */
-#ifdef CONFIG_SA1111
 extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-#else
-static inline int dma_needs_bounce(struct device *dev, dma_addr_t addr,
-				   size_t size)
-{
-	return 0;
-}
-#endif
 
 /*
  * The DMA API, implemented by dmabounce.c.  See below for descriptions.

From a387f0f5409276c5cf75eecb61ef6e6896f851b4 Mon Sep 17 00:00:00 2001
From: Mika Westerberg <mika.westerberg@iki.fi>
Date: Fri, 3 Sep 2010 17:14:54 +0100
Subject: [PATCH 152/728] ARM: 6359/1: ep93xx: move clock initialization
 earlier

Commit 7cfe24947 ("ARM: AMBA: Add pclk support to AMBA bus
infrastructure") changed AMBA bus to handle the PCLK automatically.
However, in EP93xx clock initialization is arch_initcall which is done
later than AMBA device identification. This causes
amba_get_enable_pclk() to fail resulting device where UARTs are not
functional.

So change ep93xx_clock_init() to be postcore_initcall.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 8bf3cec98cfa..4566bd1c8660 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -560,4 +560,4 @@ static int __init ep93xx_clock_init(void)
 	clkdev_add_table(clocks, ARRAY_SIZE(clocks));
 	return 0;
 }
-arch_initcall(ep93xx_clock_init);
+postcore_initcall(ep93xx_clock_init);

From cec15a0ece19116b6c2c53fedf9696c20124d491 Mon Sep 17 00:00:00 2001
From: Roland Baum <rba@tr33.de>
Date: Wed, 8 Sep 2010 14:27:55 +0200
Subject: [PATCH 153/728] HID: add device ID for new Asus Multitouch Controller
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The following patch instructs usbhid/hid-mosart to handle a new multitouch
controller, built-in by some Asus EeePC T101MT models.

Signed-off-by: Roland Baum <rba@tr33.de>
Tested-by: Roland Baum <rba@tr33.de>
Acked-by: Stéphane Chatty <chatty@enac.fr>
CC: Stéphane Chatty <chatty@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-core.c   | 1 +
 drivers/hid/hid-ids.h    | 1 +
 drivers/hid/hid-mosart.c | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index b2b3bb90dd64..2baf959301b1 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1285,6 +1285,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE_2) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 7c69f1ebb390..765a4f53eb5c 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -105,6 +105,7 @@
 
 #define USB_VENDOR_ID_ASUS		0x0486
 #define USB_DEVICE_ID_ASUS_T91MT	0x0185
+#define USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO	0x0186
 
 #define USB_VENDOR_ID_ASUSTEK		0x0b05
 #define USB_DEVICE_ID_ASUSTEK_LCM	0x1726
diff --git a/drivers/hid/hid-mosart.c b/drivers/hid/hid-mosart.c
index e91437c18906..ac5421d568f1 100644
--- a/drivers/hid/hid-mosart.c
+++ b/drivers/hid/hid-mosart.c
@@ -239,6 +239,7 @@ static void mosart_remove(struct hid_device *hdev)
 
 static const struct hid_device_id mosart_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, mosart_devices);

From eaca1386207a9e0314647d3a88967acb17cc30e3 Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Wed, 8 Sep 2010 14:31:47 +0200
Subject: [PATCH 154/728] HID: fixup blacklist entry for Asus T91MT

The device is handled by hid-mosart driver, and therefore should
be present in hid_blacklist[], not hid_ignore_list[].

Cc: Stephane Chatty <chatty@lii-enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/hid-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 2baf959301b1..3f7292486024 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1285,6 +1285,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUSTEK_MULTITOUCH_YFO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BELKIN, USB_DEVICE_ID_FLIP_KVM) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BTC, USB_DEVICE_ID_BTC_EMPREX_REMOTE) },
@@ -1580,7 +1581,6 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUS, USB_DEVICE_ID_ASUS_T91MT)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ASUSTEK, USB_DEVICE_ID_ASUSTEK_LCM2)},
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },

From 122661b67899980f1372812d907e73ebcfb3d037 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 8 Sep 2010 14:57:04 +0200
Subject: [PATCH 155/728] ALSA: hda - Fix wrong HP pin detection in
 snd_hda_parse_pin_def_config()

snd_hda_parse_pin_def_config() has some workaround for re-assigning
some pins declared as headphones to line-outs.  This didn't work properly
for some cases because it used memmove() stupidly wrongly.

Reference: Novell bnc#637263
	https://bugzilla.novell.com/show_bug.cgi?id=637263

Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 3827092cc1d2..14829210ef0b 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -4536,7 +4536,7 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec,
 			cfg->hp_outs--;
 			memmove(cfg->hp_pins + i, cfg->hp_pins + i + 1,
 				sizeof(cfg->hp_pins[0]) * (cfg->hp_outs - i));
-			memmove(sequences_hp + i - 1, sequences_hp + i,
+			memmove(sequences_hp + i, sequences_hp + i + 1,
 				sizeof(sequences_hp[0]) * (cfg->hp_outs - i));
 		}
 	}

From febc88c5948f81114f64c3412011d695aecae233 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 7 Sep 2010 14:46:37 +0200
Subject: [PATCH 156/728] semaphore: Add DEFINE_SEMAPHORE

The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been
done. Some of the users are real semaphores and we should name them as
such instead of confusing everyone with "MUTEX".

Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED]
and DECLARE_MUTEX.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
LKML-Reference: <20100907125054.795929962@linutronix.de>
---
 include/linux/semaphore.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/include/linux/semaphore.h b/include/linux/semaphore.h
index 7415839ac890..5310d27abd2a 100644
--- a/include/linux/semaphore.h
+++ b/include/linux/semaphore.h
@@ -26,6 +26,9 @@ struct semaphore {
 	.wait_list	= LIST_HEAD_INIT((name).wait_list),		\
 }
 
+#define DEFINE_SEMAPHORE(name)	\
+	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
+
 #define DECLARE_MUTEX(name)	\
 	struct semaphore name = __SEMAPHORE_INITIALIZER(name, 1)
 

From 9c55cb12c1c172e2d51e85fbb5a4796ca86b77e7 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 8 Sep 2010 11:20:37 -0400
Subject: [PATCH 157/728] tracing: Do not allow llseek to set_ftrace_filter

Reading the file set_ftrace_filter does three things.

1) shows whether or not filters are set for the function tracer
2) shows what functions are set for the function tracer
3) shows what triggers are set on any functions

3 is independent from 1 and 2.

The way this file currently works is that it is a state machine,
and as you read it, it may change state. But this assumption breaks
when you use lseek() on the file. The state machine gets out of sync
and the t_show() may use the wrong pointer and cause a kernel oops.

Luckily, this will only kill the app that does the lseek, but the app
dies while holding a mutex. This prevents anyone else from using the
set_ftrace_filter file (or any other function tracing file for that matter).

A real fix for this is to rewrite the code, but that is too much for
a -rc release or stable. This patch simply disables llseek on the
set_ftrace_filter() file for now, and we can do the proper fix for the
next major release.

Reported-by: Robert Swiecki <swiecki@google.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Tavis Ormandy <taviso@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: vendor-sec@lst.de
Cc: <stable@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/trace/ftrace.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 7cb1f45a1de1..83a16e9ee518 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2416,7 +2416,7 @@ static const struct file_operations ftrace_filter_fops = {
 	.open = ftrace_filter_open,
 	.read = seq_read,
 	.write = ftrace_filter_write,
-	.llseek = ftrace_regex_lseek,
+	.llseek = no_llseek,
 	.release = ftrace_filter_release,
 };
 

From 61a527362234ac3352a91ac67c50c6f7cd248eb1 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Fri, 27 Aug 2010 20:38:46 +0900
Subject: [PATCH 158/728] tracing/kprobe: Fix a memory leak in error case

Fix a memory leak which happens when a field name conflicts with others. In
error case, free_trace_probe() will free all arguments until nr_args, so this
increments nr_args the begining of the loop instead of the end.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113846.22882.12670.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 kernel/trace/trace_kprobe.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 8b27c9849b42..0116c038b0bc 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -992,6 +992,9 @@ static int create_trace_probe(int argc, char **argv)
 	/* parse arguments */
 	ret = 0;
 	for (i = 0; i < argc && i < MAX_TRACE_ARGS; i++) {
+		/* Increment count for freeing args in error case */
+		tp->nr_args++;
+
 		/* Parse argument name */
 		arg = strchr(argv[i], '=');
 		if (arg)
@@ -1021,11 +1024,8 @@ static int create_trace_probe(int argc, char **argv)
 		ret = parse_probe_arg(arg, tp, &tp->args[i], is_return);
 		if (ret) {
 			pr_info("Parse error at argument%d. (%d)\n", i, ret);
-			kfree(tp->args[i].name);
 			goto error;
 		}
-
-		tp->nr_args++;
 	}
 
 	ret = register_trace_probe(tp);

From 04ddd04b044d8896a4f8a921b23ba09d365df196 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Fri, 27 Aug 2010 20:38:53 +0900
Subject: [PATCH 159/728] perf probe: Fix return probe support

Fix a bug to support %return probe syntax again. Previous commit 4235b04 has a
bug which disables the %return syntax on perf probe.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100827113852.22882.87447.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/probe-event.c  |  1 +
 tools/perf/util/probe-finder.c | 10 ++++++++++
 2 files changed, 11 insertions(+)

diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index e72f05c3bef0..fcc16e4349df 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -1539,6 +1539,7 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev,
 		goto error;
 	}
 	tev->point.offset = pev->point.offset;
+	tev->point.retprobe = pev->point.retprobe;
 	tev->nargs = pev->nargs;
 	if (tev->nargs) {
 		tev->args = zalloc(sizeof(struct probe_trace_arg)
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 525136684d4e..9b0e1b1f9755 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -783,6 +783,16 @@ static int convert_probe_point(Dwarf_Die *sp_die, struct probe_finder *pf)
 		/* This function has no name. */
 		tev->point.offset = (unsigned long)pf->addr;
 
+	/* Return probe must be on the head of a subprogram */
+	if (pf->pev->point.retprobe) {
+		if (tev->point.offset != 0) {
+			pr_warning("Return probe must be on the head of"
+				   " a real function\n");
+			return -EINVAL;
+		}
+		tev->point.retprobe = true;
+	}
+
 	pr_debug("Probe point found: %s+%lu\n", tev->point.symbol,
 		 tev->point.offset);
 

From 367e94c10092469c896a226a77ef13cf6da757e4 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Fri, 27 Aug 2010 20:38:59 +0900
Subject: [PATCH 160/728] perf probe: Fix handling of arguments names

Don't make argument names from raw parameters (means the parameters are written
in kprobe-tracer syntax), because the argument syntax may include special
characters.  Just leave it, then kprobe-tracer gives a new name.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100827113859.22882.75598.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/probe-finder.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 9b0e1b1f9755..32b81f707ff5 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -686,6 +686,25 @@ static int find_variable(Dwarf_Die *sp_die, struct probe_finder *pf)
 	char buf[32], *ptr;
 	int ret, nscopes;
 
+	if (!is_c_varname(pf->pvar->var)) {
+		/* Copy raw parameters */
+		pf->tvar->value = strdup(pf->pvar->var);
+		if (pf->tvar->value == NULL)
+			return -ENOMEM;
+		if (pf->pvar->type) {
+			pf->tvar->type = strdup(pf->pvar->type);
+			if (pf->tvar->type == NULL)
+				return -ENOMEM;
+		}
+		if (pf->pvar->name) {
+			pf->tvar->name = strdup(pf->pvar->name);
+			if (pf->tvar->name == NULL)
+				return -ENOMEM;
+		} else
+			pf->tvar->name = NULL;
+		return 0;
+	}
+
 	if (pf->pvar->name)
 		pf->tvar->name = strdup(pf->pvar->name);
 	else {
@@ -700,19 +719,6 @@ static int find_variable(Dwarf_Die *sp_die, struct probe_finder *pf)
 	if (pf->tvar->name == NULL)
 		return -ENOMEM;
 
-	if (!is_c_varname(pf->pvar->var)) {
-		/* Copy raw parameters */
-		pf->tvar->value = strdup(pf->pvar->var);
-		if (pf->tvar->value == NULL)
-			return -ENOMEM;
-		if (pf->pvar->type) {
-			pf->tvar->type = strdup(pf->pvar->type);
-			if (pf->tvar->type == NULL)
-				return -ENOMEM;
-		}
-		return 0;
-	}
-
 	pr_debug("Searching '%s' variable in context.\n",
 		 pf->pvar->var);
 	/* Search child die for local variables and parameters. */

From aba91595cfcebd193425e20aabc407531526a1c5 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Fri, 27 Aug 2010 20:39:06 +0900
Subject: [PATCH 161/728] tracing/kprobes: Fix handling of argument names

Set "argN" name for each argument automatically if it has no specified name.
Since dynamic trace event(kprobe_events) accepts special characters for its
argument, its format can show those special characters (e.g. '$', '%', '+').
However, perf can't parse those format because of the character (especially
'%') mess up the format.  This sets "argX" name for those arguments if user
omitted the argument names.

E.g.
 # echo 'p do_fork %ax IP=%ip $stack' > tracing/kprobe_events
 # cat tracing/kprobe_events
 p:kprobes/p_do_fork_0 do_fork arg1=%ax IP=%ip arg3=$stack

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113906.22882.59312.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 kernel/trace/trace_kprobe.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 0116c038b0bc..a39251ef1a7b 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -997,15 +997,18 @@ static int create_trace_probe(int argc, char **argv)
 
 		/* Parse argument name */
 		arg = strchr(argv[i], '=');
-		if (arg)
+		if (arg) {
 			*arg++ = '\0';
-		else
+			tp->args[i].name = kstrdup(argv[i], GFP_KERNEL);
+		} else {
 			arg = argv[i];
+			/* If argument name is omitted, set "argN" */
+			snprintf(buf, MAX_EVENT_NAME_LEN, "arg%d", i + 1);
+			tp->args[i].name = kstrdup(buf, GFP_KERNEL);
+		}
 
-		tp->args[i].name = kstrdup(argv[i], GFP_KERNEL);
 		if (!tp->args[i].name) {
-			pr_info("Failed to allocate argument%d name '%s'.\n",
-				i, argv[i]);
+			pr_info("Failed to allocate argument[%d] name.\n", i);
 			ret = -ENOMEM;
 			goto error;
 		}
@@ -1014,7 +1017,7 @@ static int create_trace_probe(int argc, char **argv)
 			*tmp = '_';	/* convert : to _ */
 
 		if (conflict_field_name(tp->args[i].name, tp->args, i)) {
-			pr_info("Argument%d name '%s' conflicts with "
+			pr_info("Argument[%d] name '%s' conflicts with "
 				"another field.\n", i, argv[i]);
 			ret = -EINVAL;
 			goto error;
@@ -1023,7 +1026,7 @@ static int create_trace_probe(int argc, char **argv)
 		/* Parse fetch argument */
 		ret = parse_probe_arg(arg, tp, &tp->args[i], is_return);
 		if (ret) {
-			pr_info("Parse error at argument%d. (%d)\n", i, ret);
+			pr_info("Parse error at argument[%d]. (%d)\n", i, ret);
 			goto error;
 		}
 	}

From da34634fd39958725310d2c30c9b4543945f968b Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Fri, 27 Aug 2010 20:39:12 +0900
Subject: [PATCH 162/728] tracing/kprobe: Fix handling of C-unlike argument
 names

Check the argument name whether it is invalid (not C-like symbol name). This
makes event format simple.

Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
LKML-Reference: <20100827113912.22882.62313.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 kernel/trace/trace_kprobe.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index a39251ef1a7b..544301d29dee 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -514,8 +514,8 @@ static int kprobe_dispatcher(struct kprobe *kp, struct pt_regs *regs);
 static int kretprobe_dispatcher(struct kretprobe_instance *ri,
 				struct pt_regs *regs);
 
-/* Check the name is good for event/group */
-static int check_event_name(const char *name)
+/* Check the name is good for event/group/fields */
+static int is_good_name(const char *name)
 {
 	if (!isalpha(*name) && *name != '_')
 		return 0;
@@ -557,7 +557,7 @@ static struct trace_probe *alloc_trace_probe(const char *group,
 	else
 		tp->rp.kp.pre_handler = kprobe_dispatcher;
 
-	if (!event || !check_event_name(event)) {
+	if (!event || !is_good_name(event)) {
 		ret = -EINVAL;
 		goto error;
 	}
@@ -567,7 +567,7 @@ static struct trace_probe *alloc_trace_probe(const char *group,
 	if (!tp->call.name)
 		goto error;
 
-	if (!group || !check_event_name(group)) {
+	if (!group || !is_good_name(group)) {
 		ret = -EINVAL;
 		goto error;
 	}
@@ -883,7 +883,7 @@ static int create_trace_probe(int argc, char **argv)
 	int i, ret = 0;
 	int is_return = 0, is_delete = 0;
 	char *symbol = NULL, *event = NULL, *group = NULL;
-	char *arg, *tmp;
+	char *arg;
 	unsigned long offset = 0;
 	void *addr = NULL;
 	char buf[MAX_EVENT_NAME_LEN];
@@ -1012,9 +1012,13 @@ static int create_trace_probe(int argc, char **argv)
 			ret = -ENOMEM;
 			goto error;
 		}
-		tmp = strchr(tp->args[i].name, ':');
-		if (tmp)
-			*tmp = '_';	/* convert : to _ */
+
+		if (!is_good_name(tp->args[i].name)) {
+			pr_info("Invalid argument[%d] name: %s\n",
+				i, tp->args[i].name);
+			ret = -EINVAL;
+			goto error;
+		}
 
 		if (conflict_field_name(tp->args[i].name, tp->args, i)) {
 			pr_info("Argument[%d] name '%s' conflicts with "

From 2be23c475af8ae4e25f8bab08d815b17593bd547 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Wed, 8 Sep 2010 16:27:56 +0100
Subject: [PATCH 163/728] ARM: Ensure PTE modifications via dma_alloc_coherent
 are visible

Dave Hylands reports:
| We've observed a problem with dma_alloc_writecombine when the system
| is under heavy load (heavy bus traffic).  We've managed to reduce the
| problem to the following snippet, which is run from a kthread in a
| continuous loop:
|
|   void *virtAddr;
|   dma_addr_t physAddr;
|   unsigned int numBytes = 256;
|
|   for (;;) {
|       virtAddr = dma_alloc_writecombine(NULL,
|             numBytes, &physAddr, GFP_KERNEL);
|       if (virtAddr == NULL) {
|          printk(KERN_ERR "Running out of memory\n");
|          break;
|       }
|
|       /* access DMA memory allocated */
|       tmp = virtAddr;
|       *tmp = 0x77;
|
|       /* free DMA memory */
|       dma_free_writecombine(NULL,
|             numBytes, virtAddr, physAddr);
|
|         ...sleep here...
|     }
|
| By itself, the code will run forever with no issues. However, as we
| increase our bus traffic (typically using DMA) then the *tmp = 0x77
| line will eventually cause a page fault. If we add a small delay (a
| few microseconds) before the *tmp = 0x77, then we don't see a page
| fault, even under heavy load.

A dsb() is required after modifying the PTE entries to ensure that they
will always be visible.  Add this dsb().

Reported-by: Dave Hylands <dhylands@gmail.com>
Tested-by: Dave Hylands <dhylands@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/dma-mapping.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c704eed63c5d..4bc43e535d3b 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -229,6 +229,8 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 			}
 		} while (size -= PAGE_SIZE);
 
+		dsb();
+
 		return (void *)c->vm_start;
 	}
 	return NULL;

From d2a787fc57142ba8757142f1569603b4d0b714a4 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 7 Sep 2010 11:29:17 +0100
Subject: [PATCH 164/728] spi/spi_s3c64xx: Move to subsys_initcall()

Allow the use of the S3C64xx SPI controller with things like PMICs by
moving the init up to subsys_initcall().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 7e627f73bc6c..a4c480551e5f 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -1175,7 +1175,7 @@ static int __init s3c64xx_spi_init(void)
 {
 	return platform_driver_probe(&s3c64xx_spi_driver, s3c64xx_spi_probe);
 }
-module_init(s3c64xx_spi_init);
+subsys_initcall(s3c64xx_spi_init);
 
 static void __exit s3c64xx_spi_exit(void)
 {

From 9d8f86b56093d7b06d81d4063d5b9a4cbf887e75 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 7 Sep 2010 16:37:52 +0100
Subject: [PATCH 165/728] spi/spi_s3c64xx: Increase dead reckoning time in
 wait_for_xfer()

For small transfers at high speeds the expected transfer time can easily
be well under 1ms, causing the delay in wait_for_xfer() to be only the
dead reckoning fudge factor of 5ms currently included. Experiments on
some of my systems shows that this is marginal for some transfers so
double it to 10ms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index a4c480551e5f..8130f02dc466 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -320,7 +320,7 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
 
 	/* millisecs to xfer 'len' bytes @ 'cur_speed' */
 	ms = xfer->len * 8 * 1000 / sdd->cur_speed;
-	ms += 5; /* some tolerance */
+	ms += 10; /* some tolerance */
 
 	if (dma_mode) {
 		val = msecs_to_jiffies(ms) + 10;

From cbcc062abb16d39839b3d8d4e3d20360fc21eb58 Mon Sep 17 00:00:00 2001
From: Yong Wang <yong.y.wang@linux.intel.com>
Date: Tue, 7 Sep 2010 15:27:27 +0800
Subject: [PATCH 166/728] spi/dw_spi: Allow interrupt sharing

Allow interrupt sharing since exclusive interrupt line for
DW SPI controller is not provided on every platform.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/dw_spi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index d256cb00604c..11fbbf6fb07b 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -396,6 +396,11 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
 static irqreturn_t dw_spi_irq(int irq, void *dev_id)
 {
 	struct dw_spi *dws = dev_id;
+	u16 irq_status, irq_mask = 0x3f;
+
+	irq_status = dw_readw(dws, isr) & irq_mask;
+	if (!irq_status)
+		return IRQ_NONE;
 
 	if (!dws->cur_msg) {
 		spi_mask_intr(dws, SPI_INT_TXEI);
@@ -883,7 +888,7 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
 	dws->dma_inited = 0;
 	dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
 
-	ret = request_irq(dws->irq, dw_spi_irq, 0,
+	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED,
 			"dw_spi", dws);
 	if (ret < 0) {
 		dev_err(&master->dev, "can not get IRQ\n");

From e3e55ff5854655d8723ad8b307f02515aecc3df5 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 7 Sep 2010 15:52:06 +0800
Subject: [PATCH 167/728] spi/dw_spi: clean the cs_control code

commit 052dc7c45i "spi/dw_spi: conditional transfer mode change"
introduced cs_control code, which has a bug by using bit offset
for spi mode to set transfer mode in control register. Also it
forces devices who don't need cs_control to re-configure the
control registers for each spi transfer. This patch will fix them

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/dw_spi.c       | 17 +++++------------
 include/linux/spi/dw_spi.h |  2 ++
 2 files changed, 7 insertions(+), 12 deletions(-)

diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 11fbbf6fb07b..56247853c298 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -181,10 +181,6 @@ static void flush(struct dw_spi *dws)
 	wait_till_not_busy(dws);
 }
 
-static void null_cs_control(u32 command)
-{
-}
-
 static int null_writer(struct dw_spi *dws)
 {
 	u8 n_bytes = dws->n_bytes;
@@ -322,7 +318,7 @@ static void giveback(struct dw_spi *dws)
 					struct spi_transfer,
 					transfer_list);
 
-	if (!last_transfer->cs_change)
+	if (!last_transfer->cs_change && dws->cs_control)
 		dws->cs_control(MRST_SPI_DEASSERT);
 
 	msg->state = NULL;
@@ -549,13 +545,13 @@ static void pump_transfers(unsigned long data)
 	 */
 	if (dws->cs_control) {
 		if (dws->rx && dws->tx)
-			chip->tmode = 0x00;
+			chip->tmode = SPI_TMOD_TR;
 		else if (dws->rx)
-			chip->tmode = 0x02;
+			chip->tmode = SPI_TMOD_RO;
 		else
-			chip->tmode = 0x01;
+			chip->tmode = SPI_TMOD_TO;
 
-		cr0 &= ~(0x3 << SPI_MODE_OFFSET);
+		cr0 &= ~SPI_TMOD_MASK;
 		cr0 |= (chip->tmode << SPI_TMOD_OFFSET);
 	}
 
@@ -704,9 +700,6 @@ static int dw_spi_setup(struct spi_device *spi)
 		chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
 		if (!chip)
 			return -ENOMEM;
-
-		chip->cs_control = null_cs_control;
-		chip->enable_dma = 0;
 	}
 
 	/*
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h
index cc813f95a2f2..c91302f3a257 100644
--- a/include/linux/spi/dw_spi.h
+++ b/include/linux/spi/dw_spi.h
@@ -14,7 +14,9 @@
 #define SPI_MODE_OFFSET			6
 #define SPI_SCPH_OFFSET			6
 #define SPI_SCOL_OFFSET			7
+
 #define SPI_TMOD_OFFSET			8
+#define SPI_TMOD_MASK			(0x3 << SPI_TMOD_OFFSET)
 #define	SPI_TMOD_TR			0x0		/* xmit & recv */
 #define SPI_TMOD_TO			0x1		/* xmit only */
 #define SPI_TMOD_RO			0x2		/* recv only */

From 915b96191f01d53e30d74083dcf4aebfb5b7ce10 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 4 Sep 2010 09:13:17 +0200
Subject: [PATCH 168/728] powerpc/5200: efika.c: Add of_node_put to avoid
 memory leak

This function is implemented as though the function of_get_next_child does
not increment the reference count of its result, but actually it does.
Thus the patch adds of_node_put in error handling code and drops a call to
of_node_get.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E1;
position p1,p2;
@@

x@p1 = of_get_next_child(...);
... when != x = E1
of_node_get@p2(x)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

cocci.print_main("call",p1)
cocci.print_secs("get",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/efika.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c
index 45c0cb9b67e6..18c104820198 100644
--- a/arch/powerpc/platforms/52xx/efika.c
+++ b/arch/powerpc/platforms/52xx/efika.c
@@ -99,7 +99,7 @@ static void __init efika_pcisetup(void)
 	if (bus_range == NULL || len < 2 * sizeof(int)) {
 		printk(KERN_WARNING EFIKA_PLATFORM_NAME
 		       ": Can't get bus-range for %s\n", pcictrl->full_name);
-		return;
+		goto out_put;
 	}
 
 	if (bus_range[1] == bus_range[0])
@@ -111,12 +111,12 @@ static void __init efika_pcisetup(void)
 	printk(" controlled by %s\n", pcictrl->full_name);
 	printk("\n");
 
-	hose = pcibios_alloc_controller(of_node_get(pcictrl));
+	hose = pcibios_alloc_controller(pcictrl);
 	if (!hose) {
 		printk(KERN_WARNING EFIKA_PLATFORM_NAME
 		       ": Can't allocate PCI controller structure for %s\n",
 		       pcictrl->full_name);
-		return;
+		goto out_put;
 	}
 
 	hose->first_busno = bus_range[0];
@@ -124,6 +124,9 @@ static void __init efika_pcisetup(void)
 	hose->ops = &rtas_pci_ops;
 
 	pci_process_bridge_OF_ranges(hose, pcictrl, 0);
+	return;
+out_put:
+	of_node_put(pcictrl);
 }
 
 #else

From 16518d5ada690643453eb0aef3cc7841d3623c2d Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 26 Aug 2010 14:31:30 +0300
Subject: [PATCH 169/728] KVM: x86 emulator: fix regression with cmpxchg8b on
 i386 hosts

operand::val and operand::orig_val are 32-bit on i386, whereas cmpxchg8b
operands are 64-bit.

Fix by adding val64 and orig_val64 union members to struct operand, and
using them where needed.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/include/asm/kvm_emulate.h | 7 ++++++-
 arch/x86/kvm/emulate.c             | 9 ++++-----
 2 files changed, 10 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 51cfd730ac5d..1f99ecfc48e1 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -152,9 +152,14 @@ struct x86_emulate_ops {
 struct operand {
 	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
 	unsigned int bytes;
-	unsigned long orig_val, *ptr;
+	union {
+		unsigned long orig_val;
+		u64 orig_val64;
+	};
+	unsigned long *ptr;
 	union {
 		unsigned long val;
+		u64 val64;
 		char valptr[sizeof(unsigned long) + 2];
 	};
 };
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index b38bd8b92aa6..66ca98aafdd6 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1870,17 +1870,16 @@ static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
 			       struct x86_emulate_ops *ops)
 {
 	struct decode_cache *c = &ctxt->decode;
-	u64 old = c->dst.orig_val;
+	u64 old = c->dst.orig_val64;
 
 	if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
 	    ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
-
 		c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
 		c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
 		ctxt->eflags &= ~EFLG_ZF;
 	} else {
-		c->dst.val = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
-		       (u32) c->regs[VCPU_REGS_RBX];
+		c->dst.val64 = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
+			(u32) c->regs[VCPU_REGS_RBX];
 
 		ctxt->eflags |= EFLG_ZF;
 	}
@@ -2616,7 +2615,7 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 					c->src.valptr, c->src.bytes);
 		if (rc != X86EMUL_CONTINUE)
 			goto done;
-		c->src.orig_val = c->src.val;
+		c->src.orig_val64 = c->src.val64;
 	}
 
 	if (c->src2.type == OP_MEM) {

From ae0635b3580844e320a253a16985f4ce8b5bd0b6 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 27 Jul 2010 14:51:44 +0300
Subject: [PATCH 170/728] KVM: fix i8259 oops when no vcpus are online

If there are no vcpus, found will be NULL.  Check before doing anything with
it.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 8d10c063d7f2..4b7b73ce2098 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -64,6 +64,9 @@ static void pic_unlock(struct kvm_pic *s)
 		if (!found)
 			found = s->kvm->bsp_vcpu;
 
+		if (!found)
+			return;
+
 		kvm_vcpu_kick(found);
 	}
 }

From eebb5f31b8d9a2620dcf32297096f8ce1240b179 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Mon, 30 Aug 2010 12:49:13 +0300
Subject: [PATCH 171/728] KVM: i8259: fix migration

Top of kvm_kpic_state structure should have the same memory layout as
kvm_pic_state since it is copied by memcpy.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/irq.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index ffed06871c5c..63c314502993 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -43,7 +43,6 @@ struct kvm_kpic_state {
 	u8 irr;		/* interrupt request register */
 	u8 imr;		/* interrupt mask register */
 	u8 isr;		/* interrupt service register */
-	u8 isr_ack;	/* interrupt ack detection */
 	u8 priority_add;	/* highest irq priority */
 	u8 irq_base;
 	u8 read_reg_select;
@@ -56,6 +55,7 @@ struct kvm_kpic_state {
 	u8 init4;		/* true if 4 byte init */
 	u8 elcr;		/* PIIX edge/trigger selection */
 	u8 elcr_mask;
+	u8 isr_ack;	/* interrupt ack detection */
 	struct kvm_pic *pics_state;
 };
 

From fa32154e47a203688453e53c1369fcbc63b06a21 Mon Sep 17 00:00:00 2001
From: Eric Millbrandt <emillbrandt@dekaresearch.com>
Date: Fri, 3 Sep 2010 13:27:38 -0400
Subject: [PATCH 172/728] powerpc/5200: tighten up ac97 reset timing

Tighten up time timing around the gpio reset functionality.  Add a 200ns
delay before remuxing the pins back to ac97 to comply with the ac97 spec.

Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/mpc52xx_common.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 6e905314ad5d..41f3a7eda1de 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -325,12 +325,16 @@ int mpc5200_psc_ac97_gpio_reset(int psc_number)
 	clrbits32(&simple_gpio->simple_dvo, sync | out);
 	clrbits8(&wkup_gpio->wkup_dvo, reset);
 
-	/* wait at lease 1 us */
-	udelay(2);
+	/* wait for 1 us */
+	udelay(1);
 
 	/* Deassert reset */
 	setbits8(&wkup_gpio->wkup_dvo, reset);
 
+	/* wait at least 200ns */
+	/* 7 ~= (200ns * timebase) / ns2sec */
+	__delay(7);
+
 	/* Restore pin-muxing */
 	out_be32(&simple_gpio->port_config, mux);
 

From 251ee478f2c877a9a80362e094c542fbac7f5651 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Fri, 3 Sep 2010 10:36:26 +0900
Subject: [PATCH 173/728] spi/s3c64xx: Fix compilation warning

Fix compilation warning by typecasting the tx_buf pointer.

[I'm not thrilled with resorting to a cast; but I cannot see a better
way to go about this.  I don't want to drop the const from struct
spi_transfer ~~glikely]

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 8130f02dc466..240b690a8a6f 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -508,8 +508,9 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd,
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 
 		if (xfer->tx_buf != NULL) {
-			xfer->tx_dma = dma_map_single(dev, xfer->tx_buf,
-						xfer->len, DMA_TO_DEVICE);
+			xfer->tx_dma = dma_map_single(dev,
+					(void *)xfer->tx_buf, xfer->len,
+					DMA_TO_DEVICE);
 			if (dma_mapping_error(dev, xfer->tx_dma)) {
 				dev_err(dev, "dma_map_single Tx failed\n");
 				xfer->tx_dma = XFER_DMAADDR_INVALID;

From c3f139b65585a5f29df47b2302ff8dbd9bdad0b0 Mon Sep 17 00:00:00 2001
From: Jassi Brar <jassi.brar@samsung.com>
Date: Fri, 3 Sep 2010 10:36:46 +0900
Subject: [PATCH 174/728] spi/s3c64xx: Fix incorrect reuse of 'val' local
 variable.

Instead of, wrongly, reusing the 'val' variable, use a dedicated
one for reading the status register.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index 240b690a8a6f..ef9dacabe062 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -326,10 +326,11 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd,
 		val = msecs_to_jiffies(ms) + 10;
 		val = wait_for_completion_timeout(&sdd->xfer_completion, val);
 	} else {
+		u32 status;
 		val = msecs_to_loops(ms);
 		do {
-			val = readl(regs + S3C64XX_SPI_STATUS);
-		} while (RX_FIFO_LVL(val, sci) < xfer->len && --val);
+			status = readl(regs + S3C64XX_SPI_STATUS);
+		} while (RX_FIFO_LVL(status, sci) < xfer->len && --val);
 	}
 
 	if (!val)

From be7852a839b6dcd86db1a2d25b9a1a99f38db2db Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 23 Aug 2010 17:40:56 +0100
Subject: [PATCH 175/728] spi/spi_s3c64xx: Warn if PIO transfers time out

When using PIO we have a timeout for the TX and RX FIFOs to ensure that
the data actually gets transferred. Warn if we hit that timeout - it
should never happen, but this makes sure we'll find out if it does.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_s3c64xx.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c
index ef9dacabe062..c3038da2648a 100644
--- a/drivers/spi/spi_s3c64xx.c
+++ b/drivers/spi/spi_s3c64xx.c
@@ -200,6 +200,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 		val = readl(regs + S3C64XX_SPI_STATUS);
 	} while (TX_FIFO_LVL(val, sci) && loops--);
 
+	if (loops == 0)
+		dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
+
 	/* Flush RxFIFO*/
 	loops = msecs_to_loops(1);
 	do {
@@ -210,6 +213,9 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
 			break;
 	} while (loops--);
 
+	if (loops == 0)
+		dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
+
 	val = readl(regs + S3C64XX_SPI_CH_CFG);
 	val &= ~S3C64XX_SPI_CH_SW_RST;
 	writel(val, regs + S3C64XX_SPI_CH_CFG);

From 545074fb953e1753f6b8409db533ad7998789efb Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Sat, 21 Aug 2010 11:07:36 +0200
Subject: [PATCH 176/728] spi/pl022: fix APB pclk power regression on U300

With the introduction of an AMBA PrimeCell per-cell block clock,
the pclk was left on after probe() unless explicitly disabled.
This clock is wired to the same clock on PL022 causing it to stay
always on since.

Fix this up properly by clocking the pclk whenever we want to
write into any PL022 registers and clocking the external clock
whenever we want to transmit messages on the bus.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Tested-by : Kevin Wells <wellsk40@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/amba-pl022.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index acd35d1ebd12..80613abe961d 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -503,8 +503,9 @@ static void giveback(struct pl022 *pl022)
 	msg->state = NULL;
 	if (msg->complete)
 		msg->complete(msg->context);
-	/* This message is completed, so let's turn off the clock! */
+	/* This message is completed, so let's turn off the clocks! */
 	clk_disable(pl022->clk);
+	amba_pclk_disable(pl022->adev);
 }
 
 /**
@@ -1139,9 +1140,10 @@ static void pump_messages(struct work_struct *work)
 	/* Setup the SPI using the per chip configuration */
 	pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
 	/*
-	 * We enable the clock here, then the clock will be disabled when
+	 * We enable the clocks here, then the clocks will be disabled when
 	 * giveback() is called in each method (poll/interrupt/DMA)
 	 */
+	amba_pclk_enable(pl022->adev);
 	clk_enable(pl022->clk);
 	restore_state(pl022);
 	flush(pl022);
@@ -1786,11 +1788,9 @@ pl022_probe(struct amba_device *adev, struct amba_id *id)
 	}
 
 	/* Disable SSP */
-	clk_enable(pl022->clk);
 	writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
 	       SSP_CR1(pl022->virtbase));
 	load_ssp_default_config(pl022);
-	clk_disable(pl022->clk);
 
 	status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
 			     pl022);
@@ -1818,6 +1818,8 @@ pl022_probe(struct amba_device *adev, struct amba_id *id)
 		goto err_spi_register;
 	}
 	dev_dbg(dev, "probe succeded\n");
+	/* Disable the silicon block pclk and clock it when needed */
+	amba_pclk_disable(adev);
 	return 0;
 
  err_spi_register:
@@ -1879,9 +1881,9 @@ static int pl022_suspend(struct amba_device *adev, pm_message_t state)
 		return status;
 	}
 
-	clk_enable(pl022->clk);
+	amba_pclk_enable(adev);
 	load_ssp_default_config(pl022);
-	clk_disable(pl022->clk);
+	amba_pclk_disable(adev);
 	dev_dbg(&adev->dev, "suspended\n");
 	return 0;
 }

From 970f4be85ae6ecf97b711a3a2a1d5cecd3ea0534 Mon Sep 17 00:00:00 2001
From: Heikki Lindholm <holin@iki.fi>
Date: Mon, 6 Sep 2010 22:30:45 +0300
Subject: [PATCH 177/728] firewire: ohci: activate cycle timer register quirk
 on Ricoh chips

The Ricoh FireWire controllers appear to have the non-atomic cycle
timer register access bug, so, activate the driver workaround by
default.

The behaviour was observed on:
Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] and
Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04).

Signed-off-by: Heikki Lindholm <holin@iki.fi>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/ohci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index be29b0bb2471..1b05896648bc 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -263,6 +263,7 @@ static const struct {
 	{PCI_VENDOR_ID_JMICRON,	PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
 	{PCI_VENDOR_ID_NEC,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
 	{PCI_VENDOR_ID_VIA,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
+	{PCI_VENDOR_ID_RICOH,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
 	{PCI_VENDOR_ID_APPLE,	PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
 };
 

From 05f25abcf6043952fb2a2d98735dec58ba1fcadb Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 29 Aug 2010 11:52:41 +0200
Subject: [PATCH 178/728] powerpc/5200: mpc52xx_uart.c: Add of_node_put to
 avoid memory leak

Add a call to of_node_put in the error handling code following a call to
of_find_compatible_node.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E,E1;
statement S;
@@

*x =
(of_find_node_by_path
|of_find_node_by_name
|of_find_node_by_phandle
|of_get_parent
|of_get_next_parent
|of_get_next_child
|of_find_compatible_node
|of_match_node
)(...);
...
if (x == NULL) S
<... when != x = E
*if (...) {
  ... when != of_node_put(x)
      when != if (...) { ... of_node_put(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
...>
of_node_put(x);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/serial/mpc52xx_uart.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 8dedb266f143..c4399e23565a 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -500,6 +500,7 @@ static int __init mpc512x_psc_fifoc_init(void)
 	psc_fifoc = of_iomap(np, 0);
 	if (!psc_fifoc) {
 		pr_err("%s: Can't map FIFOC\n", __func__);
+		of_node_put(np);
 		return -ENODEV;
 	}
 

From 7100ae97266e387d25d0c8a5d9934931f0b07dbc Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 8 Sep 2010 20:54:49 +0000
Subject: [PATCH 179/728] Revert "[CIFS] Eliminate unused variable warning"

The change to kernel crypto and fixes to ntlvm2 and ntlmssp
series, introduced a regression.  Deferring this patch series
to 2.6.37 after Shirish fixes it.

This reverts commit c89e5198b26a869ce2842bad8519264f3394dee9.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
---
 fs/cifs/sess.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 795095f4eac6..4788e16a02cc 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -620,6 +620,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
 	struct key *spnego_key = NULL;
 	__le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
 	bool first_time;
+	char *ntlmsspblob;
 
 	if (ses == NULL)
 		return -EINVAL;
@@ -867,8 +868,6 @@ ssetup_ntlmssp_authenticate:
 				iov[1].iov_base = &pSMB->req.SecurityBlob[0];
 			} else if (phase == NtLmAuthenticate) {
 				int blob_len;
-				char *ntlmsspblob;
-
 				ntlmsspblob = kmalloc(5 *
 					sizeof(struct _AUTHENTICATE_MESSAGE),
 					GFP_KERNEL);

From 56234e2767496c125a858f880f1b3a62e04a3406 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 8 Sep 2010 20:57:05 +0000
Subject: [PATCH 180/728] Revert "Eliminate sparse warning - bad constant
 expression"

This reverts commit 2d20ca835867d93ead6ce61780d883a4b128106d.

    The change to kernel crypto and fixes to ntlvm2 and ntlmssp
    series, introduced a regression.  Deferring this patch series
    to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
---
 fs/cifs/cifsencrypt.c | 193 ++++++++++++++++--------------------------
 fs/cifs/cifsglob.h    |   7 --
 2 files changed, 72 insertions(+), 128 deletions(-)

diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 709f2296bdb4..eef78c24e0cc 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -45,38 +45,39 @@ extern void SMBencrypt(unsigned char *passwd, const unsigned char *c8,
 static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu,
 			struct TCP_Server_Info *server, char *signature)
 {
-	int rc;
+	int rc = 0;
+	struct {
+		struct shash_desc shash;
+		char ctx[crypto_shash_descsize(server->ntlmssp.md5)];
+	} sdesc;
 
 	if (cifs_pdu == NULL || server == NULL || signature == NULL)
 		return -EINVAL;
 
-	if (!server->ntlmssp.sdescmd5) {
-		cERROR(1,
-			"cifs_calculate_signature: can't generate signature\n");
-		return -1;
-	}
+	sdesc.shash.tfm = server->ntlmssp.md5;
+	sdesc.shash.flags = 0x0;
 
-	rc = crypto_shash_init(&server->ntlmssp.sdescmd5->shash);
+	rc = crypto_shash_init(&sdesc.shash);
 	if (rc) {
-		cERROR(1, "cifs_calculate_signature: oould not init md5\n");
+		cERROR(1, "could not initialize master crypto API hmacmd5\n");
 		return rc;
 	}
 
 	if (server->secType == RawNTLMSSP)
-		crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+		crypto_shash_update(&sdesc.shash,
 			server->session_key.data.ntlmv2.key,
 			CIFS_NTLMV2_SESSKEY_SIZE);
 	else
-		crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+		crypto_shash_update(&sdesc.shash,
 			(char *)&server->session_key.data,
 			server->session_key.len);
 
-	crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+	crypto_shash_update(&sdesc.shash,
 			cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
 
-	rc = crypto_shash_final(&server->ntlmssp.sdescmd5->shash, signature);
+	rc = crypto_shash_final(&sdesc.shash, signature);
 
-	return rc;
+	return 0;
 }
 
 
@@ -114,28 +115,30 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec,
 			struct TCP_Server_Info *server, char *signature)
 {
 	int i;
-	int rc;
+	int rc = 0;
+	struct {
+		struct shash_desc shash;
+		char ctx[crypto_shash_descsize(server->ntlmssp.md5)];
+	} sdesc;
 
 	if (iov == NULL || server == NULL || signature == NULL)
 		return -EINVAL;
 
-	if (!server->ntlmssp.sdescmd5) {
-		cERROR(1, "cifs_calc_signature2: can't generate signature\n");
-		return -1;
-	}
+	sdesc.shash.tfm = server->ntlmssp.md5;
+	sdesc.shash.flags = 0x0;
 
-	rc = crypto_shash_init(&server->ntlmssp.sdescmd5->shash);
+	rc = crypto_shash_init(&sdesc.shash);
 	if (rc) {
-		cERROR(1, "cifs_calc_signature2: oould not init md5\n");
+		cERROR(1, "could not initialize master crypto API hmacmd5\n");
 		return rc;
 	}
 
 	if (server->secType == RawNTLMSSP)
-		crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+		crypto_shash_update(&sdesc.shash,
 			server->session_key.data.ntlmv2.key,
 			CIFS_NTLMV2_SESSKEY_SIZE);
 	else
-		crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+		crypto_shash_update(&sdesc.shash,
 			(char *)&server->session_key.data,
 			server->session_key.len);
 
@@ -143,7 +146,7 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec,
 		if (iov[i].iov_len == 0)
 			continue;
 		if (iov[i].iov_base == NULL) {
-			cERROR(1, "cifs_calc_signature2: null iovec entry");
+			cERROR(1, "null iovec entry");
 			return -EIO;
 		}
 		/* The first entry includes a length field (which does not get
@@ -151,16 +154,16 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec,
 		if (i == 0) {
 			if (iov[0].iov_len <= 8) /* cmd field at offset 9 */
 				break; /* nothing to sign or corrupt header */
-			crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+			crypto_shash_update(&sdesc.shash,
 				iov[i].iov_base + 4, iov[i].iov_len - 4);
 		} else
-			crypto_shash_update(&server->ntlmssp.sdescmd5->shash,
+			crypto_shash_update(&sdesc.shash,
 				iov[i].iov_base, iov[i].iov_len);
 	}
 
-	rc = crypto_shash_final(&server->ntlmssp.sdescmd5->shash, signature);
+	rc = crypto_shash_final(&sdesc.shash, signature);
 
-	return rc;
+	return 0;
 }
 
 int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *server,
@@ -310,48 +313,43 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses,
 	wchar_t *user;
 	wchar_t *domain;
 	wchar_t *server;
-
-	if (!ses->server->ntlmssp.sdeschmacmd5) {
-		cERROR(1, "calc_ntlmv2_hash: can't generate ntlmv2 hash\n");
-		return -1;
-	}
+	struct {
+		struct shash_desc shash;
+		char ctx[crypto_shash_descsize(ses->server->ntlmssp.hmacmd5)];
+	} sdesc;
 
 	/* calculate md4 hash of password */
 	E_md4hash(ses->password, nt_hash);
 
+	sdesc.shash.tfm = ses->server->ntlmssp.hmacmd5;
+	sdesc.shash.flags = 0x0;
+
 	crypto_shash_setkey(ses->server->ntlmssp.hmacmd5, nt_hash,
 				CIFS_NTHASH_SIZE);
 
-	rc = crypto_shash_init(&ses->server->ntlmssp.sdeschmacmd5->shash);
+	rc = crypto_shash_init(&sdesc.shash);
 	if (rc) {
-		cERROR(1, "calc_ntlmv2_hash: could not init hmacmd5\n");
+		cERROR(1, "could not initialize master crypto API hmacmd5\n");
 		return rc;
 	}
 
 	/* convert ses->userName to unicode and uppercase */
 	len = strlen(ses->userName);
 	user = kmalloc(2 + (len * 2), GFP_KERNEL);
-	if (user == NULL) {
-		cERROR(1, "calc_ntlmv2_hash: user mem alloc failure\n");
-		rc = -ENOMEM;
+	if (user == NULL)
 		goto calc_exit_2;
-	}
 	len = cifs_strtoUCS((__le16 *)user, ses->userName, len, nls_cp);
 	UniStrupr(user);
 
-	crypto_shash_update(&ses->server->ntlmssp.sdeschmacmd5->shash,
-				(char *)user, 2 * len);
+	crypto_shash_update(&sdesc.shash, (char *)user, 2 * len);
 
 	/* convert ses->domainName to unicode and uppercase */
 	if (ses->domainName) {
 		len = strlen(ses->domainName);
 
 		domain = kmalloc(2 + (len * 2), GFP_KERNEL);
-		if (domain == NULL) {
-			cERROR(1, "calc_ntlmv2_hash: domain mem alloc failure");
-			rc = -ENOMEM;
+		if (domain == NULL)
 			goto calc_exit_1;
-		}
 		len = cifs_strtoUCS((__le16 *)domain, ses->domainName, len,
 					nls_cp);
 		/* the following line was removed since it didn't work well
@@ -359,19 +357,15 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses,
 		   Maybe converting the domain name earlier makes sense */
 		/* UniStrupr(domain); */
 
-		crypto_shash_update(&ses->server->ntlmssp.sdeschmacmd5->shash,
-					(char *)domain, 2 * len);
+		crypto_shash_update(&sdesc.shash, (char *)domain, 2 * len);
 
 		kfree(domain);
 	} else if (ses->serverName) {
 		len = strlen(ses->serverName);
 
 		server = kmalloc(2 + (len * 2), GFP_KERNEL);
-		if (server == NULL) {
-			cERROR(1, "calc_ntlmv2_hash: server mem alloc failure");
-			rc = -ENOMEM;
+		if (server == NULL)
 			goto calc_exit_1;
-		}
 		len = cifs_strtoUCS((__le16 *)server, ses->serverName, len,
 					nls_cp);
 		/* the following line was removed since it didn't work well
@@ -379,20 +373,16 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses,
 		   Maybe converting the domain name earlier makes sense */
 		/* UniStrupr(domain); */
 
-		crypto_shash_update(&ses->server->ntlmssp.sdeschmacmd5->shash,
-					(char *)server, 2 * len);
+		crypto_shash_update(&sdesc.shash, (char *)server, 2 * len);
 
 		kfree(server);
 	}
-
-	rc = crypto_shash_final(&ses->server->ntlmssp.sdeschmacmd5->shash,
-					ses->server->ntlmv2_hash);
-
 calc_exit_1:
 	kfree(user);
 calc_exit_2:
 	/* BB FIXME what about bytes 24 through 40 of the signing key?
 	   compare with the NTLM example */
+	rc = crypto_shash_final(&sdesc.shash, ses->server->ntlmv2_hash);
 
 	return rc;
 }
@@ -452,33 +442,34 @@ CalcNTLMv2_response(const struct TCP_Server_Info *server,
 			 char *v2_session_response)
 {
 	int rc;
+	struct {
+		struct shash_desc shash;
+		char ctx[crypto_shash_descsize(server->ntlmssp.hmacmd5)];
+	} sdesc;
 
-	if (!server->ntlmssp.sdeschmacmd5) {
-		cERROR(1, "calc_ntlmv2_hash: can't generate ntlmv2 hash\n");
-		return -1;
-	}
+	sdesc.shash.tfm = server->ntlmssp.hmacmd5;
+	sdesc.shash.flags = 0x0;
 
 	crypto_shash_setkey(server->ntlmssp.hmacmd5, server->ntlmv2_hash,
 		CIFS_HMAC_MD5_HASH_SIZE);
 
-	rc = crypto_shash_init(&server->ntlmssp.sdeschmacmd5->shash);
+	rc = crypto_shash_init(&sdesc.shash);
 	if (rc) {
-		cERROR(1, "CalcNTLMv2_response: could not init hmacmd5");
+		cERROR(1, "could not initialize master crypto API hmacmd5\n");
 		return rc;
 	}
 
 	memcpy(v2_session_response + CIFS_SERVER_CHALLENGE_SIZE,
 		server->cryptKey, CIFS_SERVER_CHALLENGE_SIZE);
-	crypto_shash_update(&server->ntlmssp.sdeschmacmd5->shash,
+	crypto_shash_update(&sdesc.shash,
 		v2_session_response + CIFS_SERVER_CHALLENGE_SIZE,
 		sizeof(struct ntlmv2_resp) - CIFS_SERVER_CHALLENGE_SIZE);
 
 	if (server->tilen)
-		crypto_shash_update(&server->ntlmssp.sdeschmacmd5->shash,
+		crypto_shash_update(&sdesc.shash,
 					server->tiblob, server->tilen);
 
-	rc = crypto_shash_final(&server->ntlmssp.sdeschmacmd5->shash,
-					v2_session_response);
+	rc = crypto_shash_final(&sdesc.shash, v2_session_response);
 
 	return rc;
 }
@@ -489,6 +480,10 @@ setup_ntlmv2_rsp(struct cifsSesInfo *ses, char *resp_buf,
 {
 	int rc = 0;
 	struct ntlmv2_resp *buf = (struct ntlmv2_resp *)resp_buf;
+	struct {
+		struct shash_desc shash;
+		char ctx[crypto_shash_descsize(ses->server->ntlmssp.hmacmd5)];
+	} sdesc;
 
 	buf->blob_signature = cpu_to_le32(0x00000101);
 	buf->reserved = 0;
@@ -516,24 +511,21 @@ setup_ntlmv2_rsp(struct cifsSesInfo *ses, char *resp_buf,
 		return rc;
 	}
 
-	if (!ses->server->ntlmssp.sdeschmacmd5) {
-		cERROR(1, "calc_ntlmv2_hash: can't generate ntlmv2 hash\n");
-		return -1;
-	}
-
 	crypto_shash_setkey(ses->server->ntlmssp.hmacmd5,
 			ses->server->ntlmv2_hash, CIFS_HMAC_MD5_HASH_SIZE);
 
-	rc = crypto_shash_init(&ses->server->ntlmssp.sdeschmacmd5->shash);
+	sdesc.shash.tfm = ses->server->ntlmssp.hmacmd5;
+	sdesc.shash.flags = 0x0;
+
+	rc = crypto_shash_init(&sdesc.shash);
 	if (rc) {
-		cERROR(1, "setup_ntlmv2_rsp: could not init hmacmd5\n");
+		cERROR(1, "could not initialize master crypto API hmacmd5\n");
 		return rc;
 	}
 
-	crypto_shash_update(&ses->server->ntlmssp.sdeschmacmd5->shash,
-				resp_buf, CIFS_HMAC_MD5_HASH_SIZE);
+	crypto_shash_update(&sdesc.shash, resp_buf, CIFS_HMAC_MD5_HASH_SIZE);
 
-	rc = crypto_shash_final(&ses->server->ntlmssp.sdeschmacmd5->shash,
+	rc = crypto_shash_final(&sdesc.shash,
 		ses->server->session_key.data.ntlmv2.key);
 
 	memcpy(&ses->server->session_key.data.ntlmv2.resp, resp_buf,
@@ -586,65 +578,24 @@ cifs_crypto_shash_release(struct TCP_Server_Info *server)
 
 	if (server->ntlmssp.hmacmd5)
 		crypto_free_shash(server->ntlmssp.hmacmd5);
-
-	kfree(server->ntlmssp.sdeschmacmd5);
-
-	kfree(server->ntlmssp.sdescmd5);
 }
 
 int
 cifs_crypto_shash_allocate(struct TCP_Server_Info *server)
 {
-	int rc;
-	unsigned int size;
-
 	server->ntlmssp.hmacmd5 = crypto_alloc_shash("hmac(md5)", 0, 0);
 	if (!server->ntlmssp.hmacmd5 ||
 			IS_ERR(server->ntlmssp.hmacmd5)) {
-		cERROR(1, "could not allocate crypto hmacmd5\n");
+		cERROR(1, "could not allocate master crypto API hmacmd5\n");
 		return 1;
 	}
 
 	server->ntlmssp.md5 = crypto_alloc_shash("md5", 0, 0);
 	if (!server->ntlmssp.md5 || IS_ERR(server->ntlmssp.md5)) {
-		cERROR(1, "could not allocate crypto md5\n");
-		rc = 1;
-		goto cifs_crypto_shash_allocate_ret1;
+		crypto_free_shash(server->ntlmssp.hmacmd5);
+		cERROR(1, "could not allocate master crypto API md5\n");
+		return 1;
 	}
 
-	size = sizeof(struct shash_desc) +
-			crypto_shash_descsize(server->ntlmssp.hmacmd5);
-	server->ntlmssp.sdeschmacmd5 = kmalloc(size, GFP_KERNEL);
-	if (!server->ntlmssp.sdeschmacmd5) {
-		cERROR(1, "cifs_crypto_shash_allocate: can't alloc hmacmd5\n");
-		rc = -ENOMEM;
-		goto cifs_crypto_shash_allocate_ret2;
-	}
-	server->ntlmssp.sdeschmacmd5->shash.tfm = server->ntlmssp.hmacmd5;
-	server->ntlmssp.sdeschmacmd5->shash.flags = 0x0;
-
-
-	size = sizeof(struct shash_desc) +
-			crypto_shash_descsize(server->ntlmssp.md5);
-	server->ntlmssp.sdescmd5 = kmalloc(size, GFP_KERNEL);
-	if (!server->ntlmssp.sdescmd5) {
-		cERROR(1, "cifs_crypto_shash_allocate: can't alloc md5\n");
-		rc = -ENOMEM;
-		goto cifs_crypto_shash_allocate_ret3;
-	}
-	server->ntlmssp.sdescmd5->shash.tfm = server->ntlmssp.md5;
-	server->ntlmssp.sdescmd5->shash.flags = 0x0;
-
 	return 0;
-
-cifs_crypto_shash_allocate_ret3:
-	kfree(server->ntlmssp.sdeschmacmd5);
-
-cifs_crypto_shash_allocate_ret2:
-	crypto_free_shash(server->ntlmssp.md5);
-
-cifs_crypto_shash_allocate_ret1:
-	crypto_free_shash(server->ntlmssp.hmacmd5);
-
-	return rc;
 }
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index c9d0cfc086eb..49563e0c1725 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -123,19 +123,12 @@ struct cifs_cred {
 	struct cifs_ace *aces;
 };
 
-struct sdesc {
-	struct shash_desc shash;
-	char ctx[];
-};
-
 struct ntlmssp_auth {
 	__u32 client_flags;
 	__u32 server_flags;
 	unsigned char ciphertext[CIFS_CPHTXT_SIZE];
 	struct crypto_shash *hmacmd5;
 	struct crypto_shash *md5;
-	struct sdesc *sdeschmacmd5;
-	struct sdesc *sdescmd5;
 };
 
 /*

From 745e507a9c79c6e1385d3414d5e56f3d4621a375 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 8 Sep 2010 21:09:27 +0000
Subject: [PATCH 181/728] Revert "missing changes during ntlmv2/ntlmssp auth
 and sign"

This reverts commit 3ec6bbcdb4e85403f2c5958876ca9492afdf4031.

    The change to kernel crypto and fixes to ntlvm2 and ntlmssp
    series, introduced a regression.  Deferring this patch series
    to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
---
 fs/cifs/cifsencrypt.c |  2 --
 fs/cifs/sess.c        | 13 +++++--------
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index eef78c24e0cc..051d00011ca3 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -553,8 +553,6 @@ calc_seckey(struct TCP_Server_Info *server)
 		return 1;
 	}
 
-	desc.tfm = tfm_arc4;
-
 	crypto_blkcipher_setkey(tfm_arc4,
 		server->session_key.data.ntlmv2.key, CIFS_CPHTXT_SIZE);
 	sg_init_one(&sgin, sec_key, CIFS_CPHTXT_SIZE);
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 4788e16a02cc..41fc5328120d 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -408,8 +408,6 @@ static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
 	/* BB spec says that if AvId field of MsvAvTimestamp is populated then
 		we must set the MIC field of the AUTHENTICATE_MESSAGE */
 
-	ses->server->ntlmssp.server_flags = le32_to_cpu(pblob->NegotiateFlags);
-
 	tioffset = cpu_to_le16(pblob->TargetInfoArray.BufferOffset);
 	tilen = cpu_to_le16(pblob->TargetInfoArray.Length);
 	ses->server->tilen = tilen;
@@ -442,13 +440,12 @@ static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
 	/* BB is NTLMV2 session security format easier to use here? */
 	flags = NTLMSSP_NEGOTIATE_56 |	NTLMSSP_REQUEST_TARGET |
 		NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
-		NTLMSSP_NEGOTIATE_NTLM;
+		NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
 	if (ses->server->secMode &
-	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) {
-		flags |= NTLMSSP_NEGOTIATE_SIGN |
-			NTLMSSP_NEGOTIATE_KEY_XCH |
-			NTLMSSP_NEGOTIATE_EXTENDED_SEC;
-	}
+	   (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+		flags |= NTLMSSP_NEGOTIATE_SIGN;
+	if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+		flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
 
 	sec_blob->NegotiateFlags |= cpu_to_le32(flags);
 

From c8e56f1f4fb9f82f63e4ce6d73a14501d0432c76 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 8 Sep 2010 21:10:58 +0000
Subject: [PATCH 182/728] Revert "[CIFS] Fix ntlmv2 auth with ntlmssp"

This reverts commit 9fbc590860e75785bdaf8b83e48fabfe4d4f7d58.

The change to kernel crypto and fixes to ntlvm2 and ntlmssp
series, introduced a regression.  Deferring this patch series
to 2.6.37 after Shirish fixes it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
CC: Shirish Pargaonkar <shirishp@us.ibm.com>
---
 fs/cifs/Kconfig       |   2 -
 fs/cifs/asn1.c        |   6 +-
 fs/cifs/cifsencrypt.c | 416 +++++++++++++-----------------------------
 fs/cifs/cifsglob.h    |  18 +-
 fs/cifs/cifspdu.h     |   7 +-
 fs/cifs/cifsproto.h   |  12 +-
 fs/cifs/cifssmb.c     |  13 +-
 fs/cifs/connect.c     |  13 +-
 fs/cifs/ntlmssp.h     |  13 --
 fs/cifs/sess.c        | 118 +++---------
 fs/cifs/transport.c   |   6 +-
 11 files changed, 172 insertions(+), 452 deletions(-)

diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 0da1debd499d..917b7d449bb2 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -2,8 +2,6 @@ config CIFS
 	tristate "CIFS support (advanced network filesystem, SMBFS successor)"
 	depends on INET
 	select NLS
-	select CRYPTO_MD5
-	select CRYPTO_ARC4
 	help
 	  This is the client VFS module for the Common Internet File System
 	  (CIFS) protocol which is the successor to the Server Message Block
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 21f0fbd86989..cfd1ce34e0bc 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -597,13 +597,13 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 				if (compare_oid(oid, oidlen, MSKRB5_OID,
 						MSKRB5_OID_LEN))
 					server->sec_mskerberos = true;
-				if (compare_oid(oid, oidlen, KRB5U2U_OID,
+				else if (compare_oid(oid, oidlen, KRB5U2U_OID,
 						     KRB5U2U_OID_LEN))
 					server->sec_kerberosu2u = true;
-				if (compare_oid(oid, oidlen, KRB5_OID,
+				else if (compare_oid(oid, oidlen, KRB5_OID,
 						     KRB5_OID_LEN))
 					server->sec_kerberos = true;
-				if (compare_oid(oid, oidlen, NTLMSSP_OID,
+				else if (compare_oid(oid, oidlen, NTLMSSP_OID,
 						     NTLMSSP_OID_LEN))
 					server->sec_ntlmssp = true;
 
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 051d00011ca3..847628dfdc44 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -27,7 +27,6 @@
 #include "md5.h"
 #include "cifs_unicode.h"
 #include "cifsproto.h"
-#include "ntlmssp.h"
 #include <linux/ctype.h>
 #include <linux/random.h>
 
@@ -43,44 +42,21 @@ extern void SMBencrypt(unsigned char *passwd, const unsigned char *c8,
 		       unsigned char *p24);
 
 static int cifs_calculate_signature(const struct smb_hdr *cifs_pdu,
-			struct TCP_Server_Info *server, char *signature)
+				    const struct mac_key *key, char *signature)
 {
-	int rc = 0;
-	struct {
-		struct shash_desc shash;
-		char ctx[crypto_shash_descsize(server->ntlmssp.md5)];
-	} sdesc;
+	struct	MD5Context context;
 
-	if (cifs_pdu == NULL || server == NULL || signature == NULL)
+	if ((cifs_pdu == NULL) || (signature == NULL) || (key == NULL))
 		return -EINVAL;
 
-	sdesc.shash.tfm = server->ntlmssp.md5;
-	sdesc.shash.flags = 0x0;
-
-	rc = crypto_shash_init(&sdesc.shash);
-	if (rc) {
-		cERROR(1, "could not initialize master crypto API hmacmd5\n");
-		return rc;
-	}
-
-	if (server->secType == RawNTLMSSP)
-		crypto_shash_update(&sdesc.shash,
-			server->session_key.data.ntlmv2.key,
-			CIFS_NTLMV2_SESSKEY_SIZE);
-	else
-		crypto_shash_update(&sdesc.shash,
-			(char *)&server->session_key.data,
-			server->session_key.len);
-
-	crypto_shash_update(&sdesc.shash,
-			cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
-
-	rc = crypto_shash_final(&sdesc.shash, signature);
+	cifs_MD5_init(&context);
+	cifs_MD5_update(&context, (char *)&key->data, key->len);
+	cifs_MD5_update(&context, cifs_pdu->Protocol, cifs_pdu->smb_buf_length);
 
+	cifs_MD5_final(signature, &context);
 	return 0;
 }
 
-
 int cifs_sign_smb(struct smb_hdr *cifs_pdu, struct TCP_Server_Info *server,
 		  __u32 *pexpected_response_sequence_number)
 {
@@ -102,7 +78,8 @@ int cifs_sign_smb(struct smb_hdr *cifs_pdu, struct TCP_Server_Info *server,
 	server->sequence_number++;
 	spin_unlock(&GlobalMid_Lock);
 
-	rc = cifs_calculate_signature(cifs_pdu, server, smb_signature);
+	rc = cifs_calculate_signature(cifs_pdu, &server->mac_signing_key,
+				      smb_signature);
 	if (rc)
 		memset(cifs_pdu->Signature.SecuritySignature, 0, 8);
 	else
@@ -112,36 +89,16 @@ int cifs_sign_smb(struct smb_hdr *cifs_pdu, struct TCP_Server_Info *server,
 }
 
 static int cifs_calc_signature2(const struct kvec *iov, int n_vec,
-			struct TCP_Server_Info *server, char *signature)
+				const struct mac_key *key, char *signature)
 {
+	struct  MD5Context context;
 	int i;
-	int rc = 0;
-	struct {
-		struct shash_desc shash;
-		char ctx[crypto_shash_descsize(server->ntlmssp.md5)];
-	} sdesc;
 
-	if (iov == NULL || server == NULL || signature == NULL)
+	if ((iov == NULL) || (signature == NULL) || (key == NULL))
 		return -EINVAL;
 
-	sdesc.shash.tfm = server->ntlmssp.md5;
-	sdesc.shash.flags = 0x0;
-
-	rc = crypto_shash_init(&sdesc.shash);
-	if (rc) {
-		cERROR(1, "could not initialize master crypto API hmacmd5\n");
-		return rc;
-	}
-
-	if (server->secType == RawNTLMSSP)
-		crypto_shash_update(&sdesc.shash,
-			server->session_key.data.ntlmv2.key,
-			CIFS_NTLMV2_SESSKEY_SIZE);
-	else
-		crypto_shash_update(&sdesc.shash,
-			(char *)&server->session_key.data,
-			server->session_key.len);
-
+	cifs_MD5_init(&context);
+	cifs_MD5_update(&context, (char *)&key->data, key->len);
 	for (i = 0; i < n_vec; i++) {
 		if (iov[i].iov_len == 0)
 			continue;
@@ -154,18 +111,18 @@ static int cifs_calc_signature2(const struct kvec *iov, int n_vec,
 		if (i == 0) {
 			if (iov[0].iov_len <= 8) /* cmd field at offset 9 */
 				break; /* nothing to sign or corrupt header */
-			crypto_shash_update(&sdesc.shash,
-				iov[i].iov_base + 4, iov[i].iov_len - 4);
+			cifs_MD5_update(&context, iov[0].iov_base+4,
+				  iov[0].iov_len-4);
 		} else
-			crypto_shash_update(&sdesc.shash,
-				iov[i].iov_base, iov[i].iov_len);
+			cifs_MD5_update(&context, iov[i].iov_base, iov[i].iov_len);
 	}
 
-	rc = crypto_shash_final(&sdesc.shash, signature);
+	cifs_MD5_final(signature, &context);
 
 	return 0;
 }
 
+
 int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *server,
 		   __u32 *pexpected_response_sequence_number)
 {
@@ -188,7 +145,8 @@ int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *server,
 	server->sequence_number++;
 	spin_unlock(&GlobalMid_Lock);
 
-	rc = cifs_calc_signature2(iov, n_vec, server, smb_signature);
+	rc = cifs_calc_signature2(iov, n_vec, &server->mac_signing_key,
+				      smb_signature);
 	if (rc)
 		memset(cifs_pdu->Signature.SecuritySignature, 0, 8);
 	else
@@ -198,14 +156,14 @@ int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *server,
 }
 
 int cifs_verify_signature(struct smb_hdr *cifs_pdu,
-			  struct TCP_Server_Info *server,
+			  const struct mac_key *mac_key,
 			  __u32 expected_sequence_number)
 {
-	int rc;
+	unsigned int rc;
 	char server_response_sig[8];
 	char what_we_think_sig_should_be[20];
 
-	if (cifs_pdu == NULL || server == NULL)
+	if ((cifs_pdu == NULL) || (mac_key == NULL))
 		return -EINVAL;
 
 	if (cifs_pdu->Command == SMB_COM_NEGOTIATE)
@@ -234,7 +192,7 @@ int cifs_verify_signature(struct smb_hdr *cifs_pdu,
 					cpu_to_le32(expected_sequence_number);
 	cifs_pdu->Signature.Sequence.Reserved = 0;
 
-	rc = cifs_calculate_signature(cifs_pdu, server,
+	rc = cifs_calculate_signature(cifs_pdu, mac_key,
 		what_we_think_sig_should_be);
 
 	if (rc)
@@ -251,7 +209,7 @@ int cifs_verify_signature(struct smb_hdr *cifs_pdu,
 }
 
 /* We fill in key by putting in 40 byte array which was allocated by caller */
-int cifs_calculate_session_key(struct session_key *key, const char *rn,
+int cifs_calculate_mac_key(struct mac_key *key, const char *rn,
 			   const char *password)
 {
 	char temp_key[16];
@@ -265,6 +223,63 @@ int cifs_calculate_session_key(struct session_key *key, const char *rn,
 	return 0;
 }
 
+int CalcNTLMv2_partial_mac_key(struct cifsSesInfo *ses,
+			       const struct nls_table *nls_info)
+{
+	char temp_hash[16];
+	struct HMACMD5Context ctx;
+	char *ucase_buf;
+	__le16 *unicode_buf;
+	unsigned int i, user_name_len, dom_name_len;
+
+	if (ses == NULL)
+		return -EINVAL;
+
+	E_md4hash(ses->password, temp_hash);
+
+	hmac_md5_init_limK_to_64(temp_hash, 16, &ctx);
+	user_name_len = strlen(ses->userName);
+	if (user_name_len > MAX_USERNAME_SIZE)
+		return -EINVAL;
+	if (ses->domainName == NULL)
+		return -EINVAL; /* BB should we use CIFS_LINUX_DOM */
+	dom_name_len = strlen(ses->domainName);
+	if (dom_name_len > MAX_USERNAME_SIZE)
+		return -EINVAL;
+
+	ucase_buf = kmalloc((MAX_USERNAME_SIZE+1), GFP_KERNEL);
+	if (ucase_buf == NULL)
+		return -ENOMEM;
+	unicode_buf = kmalloc((MAX_USERNAME_SIZE+1)*4, GFP_KERNEL);
+	if (unicode_buf == NULL) {
+		kfree(ucase_buf);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < user_name_len; i++)
+		ucase_buf[i] = nls_info->charset2upper[(int)ses->userName[i]];
+	ucase_buf[i] = 0;
+	user_name_len = cifs_strtoUCS(unicode_buf, ucase_buf,
+				      MAX_USERNAME_SIZE*2, nls_info);
+	unicode_buf[user_name_len] = 0;
+	user_name_len++;
+
+	for (i = 0; i < dom_name_len; i++)
+		ucase_buf[i] = nls_info->charset2upper[(int)ses->domainName[i]];
+	ucase_buf[i] = 0;
+	dom_name_len = cifs_strtoUCS(unicode_buf+user_name_len, ucase_buf,
+				     MAX_USERNAME_SIZE*2, nls_info);
+
+	unicode_buf[user_name_len + dom_name_len] = 0;
+	hmac_md5_update((const unsigned char *) unicode_buf,
+		(user_name_len+dom_name_len)*2, &ctx);
+
+	hmac_md5_final(ses->server->ntlmv2_hash, &ctx);
+	kfree(ucase_buf);
+	kfree(unicode_buf);
+	return 0;
+}
+
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 void calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
 			char *lnm_session_key)
@@ -309,29 +324,21 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses,
 {
 	int rc = 0;
 	int len;
-	char nt_hash[CIFS_NTHASH_SIZE];
+	char nt_hash[16];
+	struct HMACMD5Context *pctxt;
 	wchar_t *user;
 	wchar_t *domain;
-	wchar_t *server;
-	struct {
-		struct shash_desc shash;
-		char ctx[crypto_shash_descsize(ses->server->ntlmssp.hmacmd5)];
-	} sdesc;
+
+	pctxt = kmalloc(sizeof(struct HMACMD5Context), GFP_KERNEL);
+
+	if (pctxt == NULL)
+		return -ENOMEM;
 
 	/* calculate md4 hash of password */
 	E_md4hash(ses->password, nt_hash);
 
-	sdesc.shash.tfm = ses->server->ntlmssp.hmacmd5;
-	sdesc.shash.flags = 0x0;
-
-	crypto_shash_setkey(ses->server->ntlmssp.hmacmd5, nt_hash,
-				CIFS_NTHASH_SIZE);
-
-	rc = crypto_shash_init(&sdesc.shash);
-	if (rc) {
-		cERROR(1, "could not initialize master crypto API hmacmd5\n");
-		return rc;
-	}
+	/* convert Domainname to unicode and uppercase */
+	hmac_md5_init_limK_to_64(nt_hash, 16, pctxt);
 
 	/* convert ses->userName to unicode and uppercase */
 	len = strlen(ses->userName);
@@ -340,8 +347,7 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses,
 		goto calc_exit_2;
 	len = cifs_strtoUCS((__le16 *)user, ses->userName, len, nls_cp);
 	UniStrupr(user);
-
-	crypto_shash_update(&sdesc.shash, (char *)user, 2 * len);
+	hmac_md5_update((char *)user, 2*len, pctxt);
 
 	/* convert ses->domainName to unicode and uppercase */
 	if (ses->domainName) {
@@ -357,243 +363,65 @@ static int calc_ntlmv2_hash(struct cifsSesInfo *ses,
 		   Maybe converting the domain name earlier makes sense */
 		/* UniStrupr(domain); */
 
-		crypto_shash_update(&sdesc.shash, (char *)domain, 2 * len);
+		hmac_md5_update((char *)domain, 2*len, pctxt);
 
 		kfree(domain);
-	} else if (ses->serverName) {
-		len = strlen(ses->serverName);
-
-		server = kmalloc(2 + (len * 2), GFP_KERNEL);
-		if (server == NULL)
-			goto calc_exit_1;
-		len = cifs_strtoUCS((__le16 *)server, ses->serverName, len,
-					nls_cp);
-		/* the following line was removed since it didn't work well
-		   with lower cased domain name that passed as an option.
-		   Maybe converting the domain name earlier makes sense */
-		/* UniStrupr(domain); */
-
-		crypto_shash_update(&sdesc.shash, (char *)server, 2 * len);
-
-		kfree(server);
 	}
 calc_exit_1:
 	kfree(user);
 calc_exit_2:
 	/* BB FIXME what about bytes 24 through 40 of the signing key?
 	   compare with the NTLM example */
-	rc = crypto_shash_final(&sdesc.shash, ses->server->ntlmv2_hash);
+	hmac_md5_final(ses->server->ntlmv2_hash, pctxt);
 
+	kfree(pctxt);
 	return rc;
 }
 
-static int
-find_domain_name(struct cifsSesInfo *ses)
-{
-	int rc = 0;
-	unsigned int attrsize;
-	unsigned int type;
-	unsigned char *blobptr;
-	struct ntlmssp2_name *attrptr;
-
-	if (ses->server->tiblob) {
-		blobptr = ses->server->tiblob;
-		attrptr = (struct ntlmssp2_name *) blobptr;
-
-		while ((type = attrptr->type) != 0) {
-			blobptr += 2; /* advance attr type */
-			attrsize = attrptr->length;
-			blobptr += 2; /* advance attr size */
-			if (type == NTLMSSP_AV_NB_DOMAIN_NAME) {
-				if (!ses->domainName) {
-					ses->domainName =
-						kmalloc(attrptr->length + 1,
-								GFP_KERNEL);
-					if (!ses->domainName)
-							return -ENOMEM;
-					cifs_from_ucs2(ses->domainName,
-						(__le16 *)blobptr,
-						attrptr->length,
-						attrptr->length,
-						load_nls_default(), false);
-				}
-			}
-			blobptr += attrsize; /* advance attr  value */
-			attrptr = (struct ntlmssp2_name *) blobptr;
-		}
-	} else {
-		ses->server->tilen = 2 * sizeof(struct ntlmssp2_name);
-		ses->server->tiblob = kmalloc(ses->server->tilen, GFP_KERNEL);
-		if (!ses->server->tiblob) {
-			ses->server->tilen = 0;
-			cERROR(1, "Challenge target info allocation failure");
-			return -ENOMEM;
-		}
-		memset(ses->server->tiblob, 0x0, ses->server->tilen);
-		attrptr = (struct ntlmssp2_name *) ses->server->tiblob;
-		attrptr->type = cpu_to_le16(NTLMSSP_DOMAIN_TYPE);
-	}
-
-	return rc;
-}
-
-static int
-CalcNTLMv2_response(const struct TCP_Server_Info *server,
-			 char *v2_session_response)
-{
-	int rc;
-	struct {
-		struct shash_desc shash;
-		char ctx[crypto_shash_descsize(server->ntlmssp.hmacmd5)];
-	} sdesc;
-
-	sdesc.shash.tfm = server->ntlmssp.hmacmd5;
-	sdesc.shash.flags = 0x0;
-
-	crypto_shash_setkey(server->ntlmssp.hmacmd5, server->ntlmv2_hash,
-		CIFS_HMAC_MD5_HASH_SIZE);
-
-	rc = crypto_shash_init(&sdesc.shash);
-	if (rc) {
-		cERROR(1, "could not initialize master crypto API hmacmd5\n");
-		return rc;
-	}
-
-	memcpy(v2_session_response + CIFS_SERVER_CHALLENGE_SIZE,
-		server->cryptKey, CIFS_SERVER_CHALLENGE_SIZE);
-	crypto_shash_update(&sdesc.shash,
-		v2_session_response + CIFS_SERVER_CHALLENGE_SIZE,
-		sizeof(struct ntlmv2_resp) - CIFS_SERVER_CHALLENGE_SIZE);
-
-	if (server->tilen)
-		crypto_shash_update(&sdesc.shash,
-					server->tiblob, server->tilen);
-
-	rc = crypto_shash_final(&sdesc.shash, v2_session_response);
-
-	return rc;
-}
-
-int
-setup_ntlmv2_rsp(struct cifsSesInfo *ses, char *resp_buf,
+void setup_ntlmv2_rsp(struct cifsSesInfo *ses, char *resp_buf,
 		      const struct nls_table *nls_cp)
 {
-	int rc = 0;
+	int rc;
 	struct ntlmv2_resp *buf = (struct ntlmv2_resp *)resp_buf;
-	struct {
-		struct shash_desc shash;
-		char ctx[crypto_shash_descsize(ses->server->ntlmssp.hmacmd5)];
-	} sdesc;
+	struct HMACMD5Context context;
 
 	buf->blob_signature = cpu_to_le32(0x00000101);
 	buf->reserved = 0;
 	buf->time = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
 	get_random_bytes(&buf->client_chal, sizeof(buf->client_chal));
 	buf->reserved2 = 0;
-
-	if (!ses->domainName) {
-		rc = find_domain_name(ses);
-		if (rc) {
-			cERROR(1, "could not get domain/server name rc %d", rc);
-			return rc;
-		}
-	}
+	buf->names[0].type = cpu_to_le16(NTLMSSP_DOMAIN_TYPE);
+	buf->names[0].length = 0;
+	buf->names[1].type = 0;
+	buf->names[1].length = 0;
 
 	/* calculate buf->ntlmv2_hash */
 	rc = calc_ntlmv2_hash(ses, nls_cp);
-	if (rc) {
+	if (rc)
 		cERROR(1, "could not get v2 hash rc %d", rc);
-		return rc;
-	}
-	rc = CalcNTLMv2_response(ses->server, resp_buf);
-	if (rc) {
-		cERROR(1, "could not get v2 hash rc %d", rc);
-		return rc;
-	}
+	CalcNTLMv2_response(ses, resp_buf);
 
-	crypto_shash_setkey(ses->server->ntlmssp.hmacmd5,
-			ses->server->ntlmv2_hash, CIFS_HMAC_MD5_HASH_SIZE);
+	/* now calculate the MAC key for NTLMv2 */
+	hmac_md5_init_limK_to_64(ses->server->ntlmv2_hash, 16, &context);
+	hmac_md5_update(resp_buf, 16, &context);
+	hmac_md5_final(ses->server->mac_signing_key.data.ntlmv2.key, &context);
 
-	sdesc.shash.tfm = ses->server->ntlmssp.hmacmd5;
-	sdesc.shash.flags = 0x0;
-
-	rc = crypto_shash_init(&sdesc.shash);
-	if (rc) {
-		cERROR(1, "could not initialize master crypto API hmacmd5\n");
-		return rc;
-	}
-
-	crypto_shash_update(&sdesc.shash, resp_buf, CIFS_HMAC_MD5_HASH_SIZE);
-
-	rc = crypto_shash_final(&sdesc.shash,
-		ses->server->session_key.data.ntlmv2.key);
-
-	memcpy(&ses->server->session_key.data.ntlmv2.resp, resp_buf,
-			sizeof(struct ntlmv2_resp));
-	ses->server->session_key.len = 16 + sizeof(struct ntlmv2_resp);
-
-	return rc;
+	memcpy(&ses->server->mac_signing_key.data.ntlmv2.resp, resp_buf,
+	       sizeof(struct ntlmv2_resp));
+	ses->server->mac_signing_key.len = 16 + sizeof(struct ntlmv2_resp);
 }
 
-int
-calc_seckey(struct TCP_Server_Info *server)
+void CalcNTLMv2_response(const struct cifsSesInfo *ses,
+			 char *v2_session_response)
 {
-	int rc;
-	unsigned char sec_key[CIFS_NTLMV2_SESSKEY_SIZE];
-	struct crypto_blkcipher *tfm_arc4;
-	struct scatterlist sgin, sgout;
-	struct blkcipher_desc desc;
+	struct HMACMD5Context context;
+	/* rest of v2 struct already generated */
+	memcpy(v2_session_response + 8, ses->server->cryptKey, 8);
+	hmac_md5_init_limK_to_64(ses->server->ntlmv2_hash, 16, &context);
 
-	get_random_bytes(sec_key, CIFS_NTLMV2_SESSKEY_SIZE);
+	hmac_md5_update(v2_session_response+8,
+			sizeof(struct ntlmv2_resp) - 8, &context);
 
-	tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)",
-						0, CRYPTO_ALG_ASYNC);
-	if (!tfm_arc4 || IS_ERR(tfm_arc4)) {
-		cERROR(1, "could not allocate " "master crypto API arc4\n");
-		return 1;
-	}
-
-	crypto_blkcipher_setkey(tfm_arc4,
-		server->session_key.data.ntlmv2.key, CIFS_CPHTXT_SIZE);
-	sg_init_one(&sgin, sec_key, CIFS_CPHTXT_SIZE);
-	sg_init_one(&sgout, server->ntlmssp.ciphertext, CIFS_CPHTXT_SIZE);
-	rc = crypto_blkcipher_encrypt(&desc, &sgout, &sgin, CIFS_CPHTXT_SIZE);
-
-	if (!rc)
-		memcpy(server->session_key.data.ntlmv2.key,
-				sec_key, CIFS_NTLMV2_SESSKEY_SIZE);
-
-	crypto_free_blkcipher(tfm_arc4);
-
-	return 0;
-}
-
-void
-cifs_crypto_shash_release(struct TCP_Server_Info *server)
-{
-	if (server->ntlmssp.md5)
-		crypto_free_shash(server->ntlmssp.md5);
-
-	if (server->ntlmssp.hmacmd5)
-		crypto_free_shash(server->ntlmssp.hmacmd5);
-}
-
-int
-cifs_crypto_shash_allocate(struct TCP_Server_Info *server)
-{
-	server->ntlmssp.hmacmd5 = crypto_alloc_shash("hmac(md5)", 0, 0);
-	if (!server->ntlmssp.hmacmd5 ||
-			IS_ERR(server->ntlmssp.hmacmd5)) {
-		cERROR(1, "could not allocate master crypto API hmacmd5\n");
-		return 1;
-	}
-
-	server->ntlmssp.md5 = crypto_alloc_shash("md5", 0, 0);
-	if (!server->ntlmssp.md5 || IS_ERR(server->ntlmssp.md5)) {
-		crypto_free_shash(server->ntlmssp.hmacmd5);
-		cERROR(1, "could not allocate master crypto API md5\n");
-		return 1;
-	}
-
-	return 0;
+	hmac_md5_final(v2_session_response, &context);
+/*	cifs_dump_mem("v2_sess_rsp: ", v2_session_response, 32); */
 }
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 49563e0c1725..0cdfb8c32ac6 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -25,9 +25,6 @@
 #include <linux/workqueue.h>
 #include "cifs_fs_sb.h"
 #include "cifsacl.h"
-#include <crypto/internal/hash.h>
-#include <linux/scatterlist.h>
-
 /*
  * The sizes of various internal tables and strings
  */
@@ -100,7 +97,7 @@ enum protocolEnum {
 	/* Netbios frames protocol not supported at this time */
 };
 
-struct session_key {
+struct mac_key {
 	unsigned int len;
 	union {
 		char ntlm[CIFS_SESS_KEY_SIZE + 16];
@@ -123,14 +120,6 @@ struct cifs_cred {
 	struct cifs_ace *aces;
 };
 
-struct ntlmssp_auth {
-	__u32 client_flags;
-	__u32 server_flags;
-	unsigned char ciphertext[CIFS_CPHTXT_SIZE];
-	struct crypto_shash *hmacmd5;
-	struct crypto_shash *md5;
-};
-
 /*
  *****************************************************************
  * Except the CIFS PDUs themselves all the
@@ -193,14 +182,11 @@ struct TCP_Server_Info {
 	/* 16th byte of RFC1001 workstation name is always null */
 	char workstation_RFC1001_name[RFC1001_NAME_LEN_WITH_NULL];
 	__u32 sequence_number; /* needed for CIFS PDU signature */
-	struct session_key session_key;
+	struct mac_key mac_signing_key;
 	char ntlmv2_hash[16];
 	unsigned long lstrp; /* when we got last response from this server */
 	u16 dialect; /* dialect index that server chose */
 	/* extended security flavors that server supports */
-	unsigned int tilen; /* length of the target info blob */
-	unsigned char *tiblob; /* target info blob in challenge response */
-	struct ntlmssp_auth ntlmssp; /* various keys, ciphers, flags */
 	bool	sec_kerberos;		/* supports plain Kerberos */
 	bool	sec_mskerberos;		/* supports legacy MS Kerberos */
 	bool	sec_kerberosu2u;	/* supports U2U Kerberos */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index 320e0fd0ba7b..14d036d8db11 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -134,12 +134,6 @@
  * Size of the session key (crypto key encrypted with the password
  */
 #define CIFS_SESS_KEY_SIZE (24)
-#define CIFS_CLIENT_CHALLENGE_SIZE (8)
-#define CIFS_SERVER_CHALLENGE_SIZE (8)
-#define CIFS_HMAC_MD5_HASH_SIZE (16)
-#define CIFS_CPHTXT_SIZE (16)
-#define CIFS_NTLMV2_SESSKEY_SIZE (16)
-#define CIFS_NTHASH_SIZE (16)
 
 /*
  * Maximum user name length
@@ -669,6 +663,7 @@ struct ntlmv2_resp {
 	__le64  time;
 	__u64  client_chal; /* random */
 	__u32  reserved2;
+	struct ntlmssp2_name names[2];
 	/* array of name entries could follow ending in minimum 4 byte struct */
 } __attribute__((packed));
 
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 1378d9133844..1f5450814087 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -361,15 +361,15 @@ extern int cifs_sign_smb(struct smb_hdr *, struct TCP_Server_Info *, __u32 *);
 extern int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *,
 			  __u32 *);
 extern int cifs_verify_signature(struct smb_hdr *,
-				 struct TCP_Server_Info *server,
+				 const struct mac_key *mac_key,
 				__u32 expected_sequence_number);
-extern int cifs_calculate_session_key(struct session_key *key, const char *rn,
+extern int cifs_calculate_mac_key(struct mac_key *key, const char *rn,
 				 const char *pass);
-extern int setup_ntlmv2_rsp(struct cifsSesInfo *, char *,
+extern int CalcNTLMv2_partial_mac_key(struct cifsSesInfo *,
+			const struct nls_table *);
+extern void CalcNTLMv2_response(const struct cifsSesInfo *, char *);
+extern void setup_ntlmv2_rsp(struct cifsSesInfo *, char *,
 			     const struct nls_table *);
-extern int cifs_crypto_shash_allocate(struct TCP_Server_Info *);
-extern void cifs_crypto_shash_release(struct TCP_Server_Info *);
-extern int calc_seckey(struct TCP_Server_Info *);
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 extern void calc_lanman_hash(const char *password, const char *cryptkey,
 				bool encrypt, char *lnm_session_key);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 4bda920d1f75..c65c3419dd37 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -604,14 +604,11 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
 			else
 				rc = -EINVAL;
 
-			if (server->secType == Kerberos) {
-				if (!server->sec_kerberos &&
-						!server->sec_mskerberos)
-					rc = -EOPNOTSUPP;
-			} else if (server->secType == RawNTLMSSP) {
-				if (!server->sec_ntlmssp)
-					rc = -EOPNOTSUPP;
-			} else
+			if (server->sec_kerberos || server->sec_mskerberos)
+				server->secType = Kerberos;
+			else if (server->sec_ntlmssp)
+				server->secType = RawNTLMSSP;
+			else
 				rc = -EOPNOTSUPP;
 		}
 	} else
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index ec0ea4a43bdb..0ea52e9f9065 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1708,7 +1708,6 @@ cifs_put_smb_ses(struct cifsSesInfo *ses)
 		CIFSSMBLogoff(xid, ses);
 		_FreeXid(xid);
 	}
-	cifs_crypto_shash_release(server);
 	sesInfoFree(ses);
 	cifs_put_tcp_session(server);
 }
@@ -1788,23 +1787,13 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 	ses->linux_uid = volume_info->linux_uid;
 	ses->overrideSecFlg = volume_info->secFlg;
 
-	rc = cifs_crypto_shash_allocate(server);
-	if (rc) {
-		cERROR(1, "could not setup hash structures rc %d", rc);
-		goto get_ses_fail;
-	}
-	server->tilen = 0;
-	server->tiblob = NULL;
-
 	mutex_lock(&ses->session_mutex);
 	rc = cifs_negotiate_protocol(xid, ses);
 	if (!rc)
 		rc = cifs_setup_session(xid, ses, volume_info->local_nls);
 	mutex_unlock(&ses->session_mutex);
-	if (rc) {
-		cifs_crypto_shash_release(ses->server);
+	if (rc)
 		goto get_ses_fail;
-	}
 
 	/* success, put it on the list */
 	write_lock(&cifs_tcp_ses_lock);
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index 1db0f0746a5b..49c9a4e75319 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -61,19 +61,6 @@
 #define NTLMSSP_NEGOTIATE_KEY_XCH   0x40000000
 #define NTLMSSP_NEGOTIATE_56        0x80000000
 
-/* Define AV Pair Field IDs */
-#define NTLMSSP_AV_EOL			0
-#define NTLMSSP_AV_NB_COMPUTER_NAME	1
-#define NTLMSSP_AV_NB_DOMAIN_NAME	2
-#define NTLMSSP_AV_DNS_COMPUTER_NAME	3
-#define NTLMSSP_AV_DNS_DOMAIN_NAME	4
-#define NTLMSSP_AV_DNS_TREE_NAME	5
-#define NTLMSSP_AV_FLAGS		6
-#define NTLMSSP_AV_TIMESTAMP		7
-#define NTLMSSP_AV_RESTRICTION		8
-#define NTLMSSP_AV_TARGET_NAME		9
-#define NTLMSSP_AV_CHANNEL_BINDINGS	10
-
 /* Although typedefs are not commonly used for structure definitions */
 /* in the Linux kernel, in this particular case they are useful      */
 /* to more closely match the standards document for NTLMSSP from     */
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 41fc5328120d..0a57cb7db5dd 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -383,9 +383,6 @@ static int decode_ascii_ssetup(char **pbcc_area, int bleft,
 static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
 				    struct cifsSesInfo *ses)
 {
-	unsigned int tioffset; /* challeng message target info area */
-	unsigned int tilen; /* challeng message target info area length  */
-
 	CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
 
 	if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
@@ -408,18 +405,6 @@ static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
 	/* BB spec says that if AvId field of MsvAvTimestamp is populated then
 		we must set the MIC field of the AUTHENTICATE_MESSAGE */
 
-	tioffset = cpu_to_le16(pblob->TargetInfoArray.BufferOffset);
-	tilen = cpu_to_le16(pblob->TargetInfoArray.Length);
-	ses->server->tilen = tilen;
-	if (tilen) {
-		ses->server->tiblob = kmalloc(tilen, GFP_KERNEL);
-		if (!ses->server->tiblob) {
-			cERROR(1, "Challenge target info allocation failure");
-			return -ENOMEM;
-		}
-		memcpy(ses->server->tiblob,  bcc_ptr + tioffset, tilen);
-	}
-
 	return 0;
 }
 
@@ -466,12 +451,10 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 				   struct cifsSesInfo *ses,
 				   const struct nls_table *nls_cp, bool first)
 {
-	int rc;
-	unsigned int size;
 	AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
 	__u32 flags;
 	unsigned char *tmp;
-	struct ntlmv2_resp ntlmv2_response = {};
+	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
 
 	memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
 	sec_blob->MessageType = NtLmAuthenticate;
@@ -494,25 +477,19 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 	sec_blob->LmChallengeResponse.Length = 0;
 	sec_blob->LmChallengeResponse.MaximumLength = 0;
 
-	sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
-	rc = setup_ntlmv2_rsp(ses, (char *)&ntlmv2_response, nls_cp);
-	if (rc) {
-		cERROR(1, "error rc: %d during ntlmssp ntlmv2 setup", rc);
-		goto setup_ntlmv2_ret;
-	}
-	size =  sizeof(struct ntlmv2_resp);
-	memcpy(tmp, (char *)&ntlmv2_response, size);
-	tmp += size;
-	if (ses->server->tilen > 0) {
-		memcpy(tmp, ses->server->tiblob, ses->server->tilen);
-		tmp += ses->server->tilen;
-	} else
-		ses->server->tilen = 0;
+	/* calculate session key,  BB what about adding similar ntlmv2 path? */
+	SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+	if (first)
+		cifs_calculate_mac_key(&ses->server->mac_signing_key,
+				       ntlm_session_key, ses->password);
 
-	sec_blob->NtChallengeResponse.Length = cpu_to_le16(size +
-				ses->server->tilen);
+	memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+	sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
 	sec_blob->NtChallengeResponse.MaximumLength =
-		cpu_to_le16(size + ses->server->tilen);
+				cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+	tmp += CIFS_SESS_KEY_SIZE;
 
 	if (ses->domainName == NULL) {
 		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
@@ -524,6 +501,7 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 		len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
 				    MAX_USERNAME_SIZE, nls_cp);
 		len *= 2; /* unicode is 2 bytes each */
+		len += 2; /* trailing null */
 		sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
 		sec_blob->DomainName.Length = cpu_to_le16(len);
 		sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
@@ -540,6 +518,7 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 		len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
 				    MAX_USERNAME_SIZE, nls_cp);
 		len *= 2; /* unicode is 2 bytes each */
+		len += 2; /* trailing null */
 		sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
 		sec_blob->UserName.Length = cpu_to_le16(len);
 		sec_blob->UserName.MaximumLength = cpu_to_le16(len);
@@ -551,26 +530,9 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
 	sec_blob->WorkstationName.MaximumLength = 0;
 	tmp += 2;
 
-	if ((ses->server->ntlmssp.server_flags & NTLMSSP_NEGOTIATE_KEY_XCH) &&
-			!calc_seckey(ses->server)) {
-		memcpy(tmp, ses->server->ntlmssp.ciphertext, CIFS_CPHTXT_SIZE);
-		sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
-		sec_blob->SessionKey.Length = cpu_to_le16(CIFS_CPHTXT_SIZE);
-		sec_blob->SessionKey.MaximumLength =
-			cpu_to_le16(CIFS_CPHTXT_SIZE);
-		tmp += CIFS_CPHTXT_SIZE;
-	} else {
-		sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
-		sec_blob->SessionKey.Length = 0;
-		sec_blob->SessionKey.MaximumLength = 0;
-	}
-
-	ses->server->sequence_number = 0;
-
-setup_ntlmv2_ret:
-	if (ses->server->tilen > 0)
-		kfree(ses->server->tiblob);
-
+	sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+	sec_blob->SessionKey.Length = 0;
+	sec_blob->SessionKey.MaximumLength = 0;
 	return tmp - pbuffer;
 }
 
@@ -584,14 +546,15 @@ static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
 	return;
 }
 
-static int setup_ntlmssp_auth_req(char *ntlmsspblob,
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
 				  struct cifsSesInfo *ses,
 				  const struct nls_table *nls, bool first_time)
 {
 	int bloblen;
 
-	bloblen = build_ntlmssp_auth_blob(ntlmsspblob, ses, nls,
+	bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
 					  first_time);
+	pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
 
 	return bloblen;
 }
@@ -617,7 +580,6 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses,
 	struct key *spnego_key = NULL;
 	__le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
 	bool first_time;
-	char *ntlmsspblob;
 
 	if (ses == NULL)
 		return -EINVAL;
@@ -728,7 +690,7 @@ ssetup_ntlmssp_authenticate:
 
 		if (first_time) /* should this be moved into common code
 				  with similar ntlmv2 path? */
-			cifs_calculate_session_key(&ses->server->session_key,
+			cifs_calculate_mac_key(&ses->server->mac_signing_key,
 				ntlm_session_key, ses->password);
 		/* copy session key */
 
@@ -767,21 +729,12 @@ ssetup_ntlmssp_authenticate:
 			cpu_to_le16(sizeof(struct ntlmv2_resp));
 
 		/* calculate session key */
-		rc = setup_ntlmv2_rsp(ses, v2_sess_key, nls_cp);
-		if (rc) {
-			kfree(v2_sess_key);
-			goto ssetup_exit;
-		}
+		setup_ntlmv2_rsp(ses, v2_sess_key, nls_cp);
 		/* FIXME: calculate MAC key */
 		memcpy(bcc_ptr, (char *)v2_sess_key,
 		       sizeof(struct ntlmv2_resp));
 		bcc_ptr += sizeof(struct ntlmv2_resp);
 		kfree(v2_sess_key);
-		if (ses->server->tilen > 0) {
-			memcpy(bcc_ptr, ses->server->tiblob,
-				ses->server->tilen);
-			bcc_ptr += ses->server->tilen;
-		}
 		if (ses->capabilities & CAP_UNICODE) {
 			if (iov[0].iov_len % 2) {
 				*bcc_ptr = 0;
@@ -812,15 +765,15 @@ ssetup_ntlmssp_authenticate:
 		}
 		/* bail out if key is too long */
 		if (msg->sesskey_len >
-		    sizeof(ses->server->session_key.data.krb5)) {
+		    sizeof(ses->server->mac_signing_key.data.krb5)) {
 			cERROR(1, "Kerberos signing key too long (%u bytes)",
 				msg->sesskey_len);
 			rc = -EOVERFLOW;
 			goto ssetup_exit;
 		}
 		if (first_time) {
-			ses->server->session_key.len = msg->sesskey_len;
-			memcpy(ses->server->session_key.data.krb5,
+			ses->server->mac_signing_key.len = msg->sesskey_len;
+			memcpy(ses->server->mac_signing_key.data.krb5,
 				msg->data, msg->sesskey_len);
 		}
 		pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
@@ -862,26 +815,12 @@ ssetup_ntlmssp_authenticate:
 			if (phase == NtLmNegotiate) {
 				setup_ntlmssp_neg_req(pSMB, ses);
 				iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
-				iov[1].iov_base = &pSMB->req.SecurityBlob[0];
 			} else if (phase == NtLmAuthenticate) {
 				int blob_len;
-				ntlmsspblob = kmalloc(5 *
-					sizeof(struct _AUTHENTICATE_MESSAGE),
-					GFP_KERNEL);
-				if (!ntlmsspblob) {
-					cERROR(1, "Can't allocate NTLMSSP");
-					rc = -ENOMEM;
-					goto ssetup_exit;
-				}
-
-				blob_len = setup_ntlmssp_auth_req(ntlmsspblob,
-								ses,
-								nls_cp,
-								first_time);
+				blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+								  nls_cp,
+								  first_time);
 				iov[1].iov_len = blob_len;
-				iov[1].iov_base = ntlmsspblob;
-				pSMB->req.SecurityBlobLength =
-					cpu_to_le16(blob_len);
 				/* Make sure that we tell the server that we
 				   are using the uid that it just gave us back
 				   on the response (challenge) */
@@ -891,6 +830,7 @@ ssetup_ntlmssp_authenticate:
 				rc = -ENOSYS;
 				goto ssetup_exit;
 			}
+			iov[1].iov_base = &pSMB->req.SecurityBlob[0];
 			/* unicode strings must be word aligned */
 			if ((iov[0].iov_len + iov[1].iov_len) % 2) {
 				*bcc_ptr = 0;
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index e0588cdf4cc5..82f78c4d6978 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -543,7 +543,7 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses,
 		    (ses->server->secMode & (SECMODE_SIGN_REQUIRED |
 					     SECMODE_SIGN_ENABLED))) {
 			rc = cifs_verify_signature(midQ->resp_buf,
-						ses->server,
+						&ses->server->mac_signing_key,
 						midQ->sequence_number+1);
 			if (rc) {
 				cERROR(1, "Unexpected SMB signature");
@@ -731,7 +731,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses,
 		    (ses->server->secMode & (SECMODE_SIGN_REQUIRED |
 					     SECMODE_SIGN_ENABLED))) {
 			rc = cifs_verify_signature(out_buf,
-						ses->server,
+						&ses->server->mac_signing_key,
 						midQ->sequence_number+1);
 			if (rc) {
 				cERROR(1, "Unexpected SMB signature");
@@ -981,7 +981,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon,
 	    (ses->server->secMode & (SECMODE_SIGN_REQUIRED |
 				     SECMODE_SIGN_ENABLED))) {
 		rc = cifs_verify_signature(out_buf,
-					   ses->server,
+					   &ses->server->mac_signing_key,
 					   midQ->sequence_number+1);
 		if (rc) {
 			cERROR(1, "Unexpected SMB signature");

From 639e7a913d81f918bfbf506e6ecd54664f787cbd Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 3 Sep 2010 11:50:09 -0400
Subject: [PATCH 183/728] cifs: eliminate redundant xdev check in cifs_rename

The VFS always checks that the source and target of a rename are on the
same vfsmount, and hence have the same superblock. So, this check is
redundant. Remove it and simplify the error handling.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 86a164f08a74..93f77d438d3c 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1462,28 +1462,17 @@ int cifs_rename(struct inode *source_dir, struct dentry *source_dentry,
 {
 	char *fromName = NULL;
 	char *toName = NULL;
-	struct cifs_sb_info *cifs_sb_source;
-	struct cifs_sb_info *cifs_sb_target;
+	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
 	FILE_UNIX_BASIC_INFO *info_buf_source = NULL;
 	FILE_UNIX_BASIC_INFO *info_buf_target;
 	int xid, rc, tmprc;
 
-	cifs_sb_target = CIFS_SB(target_dir->i_sb);
-	cifs_sb_source = CIFS_SB(source_dir->i_sb);
-	tcon = cifs_sb_source->tcon;
+	cifs_sb = CIFS_SB(source_dir->i_sb);
+	tcon = cifs_sb->tcon;
 
 	xid = GetXid();
 
-	/*
-	 * BB: this might be allowed if same server, but different share.
-	 * Consider adding support for this
-	 */
-	if (tcon != cifs_sb_target->tcon) {
-		rc = -EXDEV;
-		goto cifs_rename_exit;
-	}
-
 	/*
 	 * we already have the rename sem so we do not need to
 	 * grab it again here to protect the path integrity
@@ -1519,17 +1508,16 @@ int cifs_rename(struct inode *source_dir, struct dentry *source_dentry,
 		info_buf_target = info_buf_source + 1;
 		tmprc = CIFSSMBUnixQPathInfo(xid, tcon, fromName,
 					info_buf_source,
-					cifs_sb_source->local_nls,
-					cifs_sb_source->mnt_cifs_flags &
+					cifs_sb->local_nls,
+					cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 		if (tmprc != 0)
 			goto unlink_target;
 
-		tmprc = CIFSSMBUnixQPathInfo(xid, tcon,
-					toName, info_buf_target,
-					cifs_sb_target->local_nls,
-					/* remap based on source sb */
-					cifs_sb_source->mnt_cifs_flags &
+		tmprc = CIFSSMBUnixQPathInfo(xid, tcon, toName,
+					info_buf_target,
+					cifs_sb->local_nls,
+					cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 
 		if (tmprc == 0 && (info_buf_source->UniqueId ==

From 4266d9118f85b050a341992f0cfab40d392ef32c Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 8 Sep 2010 21:17:29 +0000
Subject: [PATCH 184/728] [CIFS] ntlmv2/ntlmssp remove-unused-function
 CalcNTLMv2_partial_mac_key

This function is not used, so remove the definition and declaration.

Reviewed-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsencrypt.c | 57 -------------------------------------------
 fs/cifs/cifsproto.h   |  2 --
 2 files changed, 59 deletions(-)

diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 847628dfdc44..35042d8f7338 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -223,63 +223,6 @@ int cifs_calculate_mac_key(struct mac_key *key, const char *rn,
 	return 0;
 }
 
-int CalcNTLMv2_partial_mac_key(struct cifsSesInfo *ses,
-			       const struct nls_table *nls_info)
-{
-	char temp_hash[16];
-	struct HMACMD5Context ctx;
-	char *ucase_buf;
-	__le16 *unicode_buf;
-	unsigned int i, user_name_len, dom_name_len;
-
-	if (ses == NULL)
-		return -EINVAL;
-
-	E_md4hash(ses->password, temp_hash);
-
-	hmac_md5_init_limK_to_64(temp_hash, 16, &ctx);
-	user_name_len = strlen(ses->userName);
-	if (user_name_len > MAX_USERNAME_SIZE)
-		return -EINVAL;
-	if (ses->domainName == NULL)
-		return -EINVAL; /* BB should we use CIFS_LINUX_DOM */
-	dom_name_len = strlen(ses->domainName);
-	if (dom_name_len > MAX_USERNAME_SIZE)
-		return -EINVAL;
-
-	ucase_buf = kmalloc((MAX_USERNAME_SIZE+1), GFP_KERNEL);
-	if (ucase_buf == NULL)
-		return -ENOMEM;
-	unicode_buf = kmalloc((MAX_USERNAME_SIZE+1)*4, GFP_KERNEL);
-	if (unicode_buf == NULL) {
-		kfree(ucase_buf);
-		return -ENOMEM;
-	}
-
-	for (i = 0; i < user_name_len; i++)
-		ucase_buf[i] = nls_info->charset2upper[(int)ses->userName[i]];
-	ucase_buf[i] = 0;
-	user_name_len = cifs_strtoUCS(unicode_buf, ucase_buf,
-				      MAX_USERNAME_SIZE*2, nls_info);
-	unicode_buf[user_name_len] = 0;
-	user_name_len++;
-
-	for (i = 0; i < dom_name_len; i++)
-		ucase_buf[i] = nls_info->charset2upper[(int)ses->domainName[i]];
-	ucase_buf[i] = 0;
-	dom_name_len = cifs_strtoUCS(unicode_buf+user_name_len, ucase_buf,
-				     MAX_USERNAME_SIZE*2, nls_info);
-
-	unicode_buf[user_name_len + dom_name_len] = 0;
-	hmac_md5_update((const unsigned char *) unicode_buf,
-		(user_name_len+dom_name_len)*2, &ctx);
-
-	hmac_md5_final(ses->server->ntlmv2_hash, &ctx);
-	kfree(ucase_buf);
-	kfree(unicode_buf);
-	return 0;
-}
-
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 void calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt,
 			char *lnm_session_key)
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 1f5450814087..f399b16cb7d5 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -365,8 +365,6 @@ extern int cifs_verify_signature(struct smb_hdr *,
 				__u32 expected_sequence_number);
 extern int cifs_calculate_mac_key(struct mac_key *key, const char *rn,
 				 const char *pass);
-extern int CalcNTLMv2_partial_mac_key(struct cifsSesInfo *,
-			const struct nls_table *);
 extern void CalcNTLMv2_response(const struct cifsSesInfo *, char *);
 extern void setup_ntlmv2_rsp(struct cifsSesInfo *, char *,
 			     const struct nls_table *);

From 522bbe65a2415fabce618186fc7777eb4c502989 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 3 Sep 2010 12:00:49 -0400
Subject: [PATCH 185/728] cifs: prevent cifsd from exiting prematurely

When cifs_demultiplex_thread exits, it does a number of cleanup tasks
including freeing the TCP_Server_Info struct. Much of the existing code
in cifs assumes that when there is a cisfSesInfo struct, that it holds a
reference to a valid TCP_Server_Info struct.

We can never allow cifsd to exit when a cifsSesInfo struct is still
holding a reference to the server. The server pointers will then point
to freed memory.

This patch eliminates a couple of questionable conditions where it does
this.  The idea here is to make an -EINTR return from kernel_recvmsg
behave the same way as -ERESTARTSYS or -EAGAIN. If the task was
signalled from cifs_put_tcp_session, then tcpStatus will be CifsExiting,
and the kernel_recvmsg call will return quickly.

There's also another condition where this can occur too -- if the
tcpStatus is still in CifsNew, then it will also exit if the server
closes the socket prematurely.  I think we'll probably also need to fix
that situation, but that requires a bit more consideration.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 0ea52e9f9065..5f68b968faa7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -400,7 +400,9 @@ incomplete_rcv:
 			cFYI(1, "call to reconnect done");
 			csocket = server->ssocket;
 			continue;
-		} else if ((length == -ERESTARTSYS) || (length == -EAGAIN)) {
+		} else if (length == -ERESTARTSYS ||
+			   length == -EAGAIN ||
+			   length == -EINTR) {
 			msleep(1); /* minimum sleep to prevent looping
 				allowing socket to clear and app threads to set
 				tcpStatus CifsNeedReconnect if server hung */
@@ -422,10 +424,6 @@ incomplete_rcv:
 				   and so simply return error to mount */
 				break;
 			}
-			if (!try_to_freeze() && (length == -EINTR)) {
-				cFYI(1, "cifsd thread killed");
-				break;
-			}
 			cFYI(1, "Reconnect after unexpected peek error %d",
 				length);
 			cifs_reconnect(server);
@@ -522,8 +520,7 @@ incomplete_rcv:
 		     total_read += length) {
 			length = kernel_recvmsg(csocket, &smb_msg, &iov, 1,
 						pdu_length - total_read, 0);
-			if ((server->tcpStatus == CifsExiting) ||
-			    (length == -EINTR)) {
+			if (server->tcpStatus == CifsExiting) {
 				/* then will exit */
 				reconnect = 2;
 				break;
@@ -534,8 +531,9 @@ incomplete_rcv:
 				/* Now we will reread sock */
 				reconnect = 1;
 				break;
-			} else if ((length == -ERESTARTSYS) ||
-				   (length == -EAGAIN)) {
+			} else if (length == -ERESTARTSYS ||
+				   length == -EAGAIN ||
+				   length == -EINTR) {
 				msleep(1); /* minimum sleep to prevent looping,
 					      allowing socket to clear and app
 					      threads to set tcpStatus

From 7332f2a6217ee6925f83ef0e725013067ed316ba Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 3 Sep 2010 12:00:49 -0400
Subject: [PATCH 186/728] cifs: eliminate some more premature cifsd exits

If the tcpStatus is still CifsNew, the main cifs_demultiplex_loop can
break out prematurely in some cases. This is wrong as we will almost
always have other structures with pointers to the TCP_Server_Info. If
the main loop breaks under any other condition other than tcpStatus ==
CifsExiting, then it'll face a use-after-free situation.

I don't see any reason to treat a CifsNew tcpStatus differently than
CifsGood. I believe we'll still want to attempt to reconnect in either
case. What should happen in those situations is that the MIDs get marked
as MID_RETRY_NEEDED. This will make CIFSSMBNegotiate return -EAGAIN, and
then the caller can retry the whole thing on a newly reconnected socket.
If that fails again in the same way, the caller of cifs_get_smb_ses
should tear down the TCP_Server_Info struct.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 41 ++++++++++++-----------------------------
 1 file changed, 12 insertions(+), 29 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 5f68b968faa7..5fde83f0c75e 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -416,14 +416,6 @@ incomplete_rcv:
 			} else
 				continue;
 		} else if (length <= 0) {
-			if (server->tcpStatus == CifsNew) {
-				cFYI(1, "tcp session abend after SMBnegprot");
-				/* some servers kill the TCP session rather than
-				   returning an SMB negprot error, in which
-				   case reconnecting here is not going to help,
-				   and so simply return error to mount */
-				break;
-			}
 			cFYI(1, "Reconnect after unexpected peek error %d",
 				length);
 			cifs_reconnect(server);
@@ -464,27 +456,18 @@ incomplete_rcv:
 			   an error on SMB negprot response */
 			cFYI(1, "Negative RFC1002 Session Response Error 0x%x)",
 				pdu_length);
-			if (server->tcpStatus == CifsNew) {
-				/* if nack on negprot (rather than
-				ret of smb negprot error) reconnecting
-				not going to help, ret error to mount */
-				break;
-			} else {
-				/* give server a second to
-				clean up before reconnect attempt */
-				msleep(1000);
-				/* always try 445 first on reconnect
-				since we get NACK on some if we ever
-				connected to port 139 (the NACK is
-				since we do not begin with RFC1001
-				session initialize frame) */
-				server->addr.sockAddr.sin_port =
-					htons(CIFS_PORT);
-				cifs_reconnect(server);
-				csocket = server->ssocket;
-				wake_up(&server->response_q);
-				continue;
-			}
+			/* give server a second to clean up  */
+			msleep(1000);
+			/* always try 445 first on reconnect since we get NACK
+			 * on some if we ever connected to port 139 (the NACK
+			 * is since we do not begin with RFC1001 session
+			 * initialize frame)
+			 */
+			server->addr.sockAddr.sin_port = htons(CIFS_PORT);
+			cifs_reconnect(server);
+			csocket = server->ssocket;
+			wake_up(&server->response_q);
+			continue;
 		} else if (temp != (char) 0) {
 			cERROR(1, "Unknown RFC 1002 frame");
 			cifs_dump_mem(" Received Data: ", (char *)smb_buffer,

From 32670396e7fc6e4f37451a69339968985461a374 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Fri, 3 Sep 2010 12:00:50 -0400
Subject: [PATCH 187/728] cifs: prevent possible memory corruption in
 cifs_demultiplex_thread

cifs_demultiplex_thread sets the addr.sockAddr.sin_port without any
regard for the socket family. While it may be that the error in question
here never occurs on an IPv6 socket, it's probably best to be safe and
set the port properly if it ever does.

Break the port setting code out of cifs_fill_sockaddr and into a new
function, and call that from cifs_demultiplex_thread.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsproto.h |  3 ++-
 fs/cifs/connect.c   |  3 ++-
 fs/cifs/netmisc.c   | 30 +++++++++++++++++-------------
 3 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index f399b16cb7d5..1d60c655e3e0 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -87,8 +87,9 @@ extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
 			struct TCP_Server_Info *server);
 extern int cifs_convert_address(struct sockaddr *dst, const char *src, int len);
+extern int cifs_set_port(struct sockaddr *addr, const unsigned short int port);
 extern int cifs_fill_sockaddr(struct sockaddr *dst, const char *src, int len,
-				unsigned short int port);
+				const unsigned short int port);
 extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr);
 extern void header_assemble(struct smb_hdr *, char /* command */ ,
 			    const struct cifsTconInfo *, int /* length of
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 5fde83f0c75e..67dad54fbfa1 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -463,7 +463,8 @@ incomplete_rcv:
 			 * is since we do not begin with RFC1001 session
 			 * initialize frame)
 			 */
-			server->addr.sockAddr.sin_port = htons(CIFS_PORT);
+			cifs_set_port((struct sockaddr *)
+					&server->addr.sockAddr, CIFS_PORT);
 			cifs_reconnect(server);
 			csocket = server->ssocket;
 			wake_up(&server->response_q);
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index f97851119e6c..9aad47a2d62f 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -205,25 +205,29 @@ cifs_convert_address(struct sockaddr *dst, const char *src, int len)
 	return rc;
 }
 
+int
+cifs_set_port(struct sockaddr *addr, const unsigned short int port)
+{
+	switch (addr->sa_family) {
+	case AF_INET:
+		((struct sockaddr_in *)addr)->sin_port = htons(port);
+		break;
+	case AF_INET6:
+		((struct sockaddr_in6 *)addr)->sin6_port = htons(port);
+		break;
+	default:
+		return 0;
+	}
+	return 1;
+}
+
 int
 cifs_fill_sockaddr(struct sockaddr *dst, const char *src, int len,
 		   const unsigned short int port)
 {
 	if (!cifs_convert_address(dst, src, len))
 		return 0;
-
-	switch (dst->sa_family) {
-	case AF_INET:
-		((struct sockaddr_in *)dst)->sin_port = htons(port);
-		break;
-	case AF_INET6:
-		((struct sockaddr_in6 *)dst)->sin6_port = htons(port);
-		break;
-	default:
-		return 0;
-	}
-
-	return 1;
+	return cifs_set_port(dst, port);
 }
 
 /*****************************************************************************

From 70c9db0fdfd703781c3b8c2caf9287806f642e02 Mon Sep 17 00:00:00 2001
From: Chien Tung <chien.tin.tung@intel.com>
Date: Tue, 7 Sep 2010 16:31:20 +0000
Subject: [PATCH 188/728] RDMA/nes: Write correct register write to set TX
 pause param

Setting TX pause param writes to the wrong register location causing
the adapter to hang.  Correct the define used to write the reigster.

Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116
Reported-by: Shiri Franchi <shirif@voltaire.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_nic.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 6dfdd49cdbcf..10560c796fd6 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1446,14 +1446,14 @@ static int nes_netdev_set_pauseparam(struct net_device *netdev,
 				NES_IDX_MAC_TX_CONFIG + (nesdev->mac_index*0x200));
 		u32temp |= NES_IDX_MAC_TX_CONFIG_ENABLE_PAUSE;
 		nes_write_indexed(nesdev,
-				NES_IDX_MAC_TX_CONFIG_ENABLE_PAUSE + (nesdev->mac_index*0x200), u32temp);
+				NES_IDX_MAC_TX_CONFIG + (nesdev->mac_index*0x200), u32temp);
 		nesdev->disable_tx_flow_control = 0;
 	} else if ((et_pauseparam->tx_pause == 0) && (nesdev->disable_tx_flow_control == 0)) {
 		u32temp = nes_read_indexed(nesdev,
 				NES_IDX_MAC_TX_CONFIG + (nesdev->mac_index*0x200));
 		u32temp &= ~NES_IDX_MAC_TX_CONFIG_ENABLE_PAUSE;
 		nes_write_indexed(nesdev,
-				NES_IDX_MAC_TX_CONFIG_ENABLE_PAUSE + (nesdev->mac_index*0x200), u32temp);
+				NES_IDX_MAC_TX_CONFIG + (nesdev->mac_index*0x200), u32temp);
 		nesdev->disable_tx_flow_control = 1;
 	}
 	if ((et_pauseparam->rx_pause == 1) && (nesdev->disable_rx_flow_control == 1)) {

From dae58728dc64e9ad71c40ac90b463bff6ecce271 Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Sat, 14 Aug 2010 21:04:56 +0000
Subject: [PATCH 189/728] RDMA/nes: Fix double CLOSE event indication crash

During a stress testing in a large cluster, multiple close event are
detected and BUG() is hit in the iWARP core.  The cause is that the
active node gave up while waiting for an MPA response from the peer
and tried to close the connection by sending RST.  The passive node
driver receives the RST but is waiting for MPA response from the user.
When the MPA accept is received, the driver offloads the connection
and sends a CLOSE event.  The driver gets an AE indicating RESET
received and also sends a CLOSE event, hitting a BUG().

Fix this by correcting RESET handling and sending CLOSE events.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index 443cea55daac..61e0efd4ccfb 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -502,7 +502,9 @@ int schedule_nes_timer(struct nes_cm_node *cm_node, struct sk_buff *skb,
 static void nes_retrans_expired(struct nes_cm_node *cm_node)
 {
 	struct iw_cm_id *cm_id = cm_node->cm_id;
-	switch (cm_node->state) {
+	enum nes_cm_node_state state = cm_node->state;
+	cm_node->state = NES_CM_STATE_CLOSED;
+	switch (state) {
 	case NES_CM_STATE_SYN_RCVD:
 	case NES_CM_STATE_CLOSING:
 		rem_ref_cm_node(cm_node->cm_core, cm_node);
@@ -511,7 +513,6 @@ static void nes_retrans_expired(struct nes_cm_node *cm_node)
 	case NES_CM_STATE_FIN_WAIT1:
 		if (cm_node->cm_id)
 			cm_id->rem_ref(cm_id);
-		cm_node->state = NES_CM_STATE_CLOSED;
 		send_reset(cm_node, NULL);
 		break;
 	default:
@@ -1439,9 +1440,6 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 		break;
 	case NES_CM_STATE_MPAREQ_RCVD:
 		passive_state = atomic_add_return(1, &cm_node->passive_state);
-		if (passive_state ==  NES_SEND_RESET_EVENT)
-			create_event(cm_node, NES_CM_EVENT_RESET);
-		cm_node->state = NES_CM_STATE_CLOSED;
 		dev_kfree_skb_any(skb);
 		break;
 	case NES_CM_STATE_ESTABLISHED:
@@ -1456,6 +1454,7 @@ static void handle_rst_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
 	case NES_CM_STATE_CLOSED:
 		drop_packet(skb);
 		break;
+	case NES_CM_STATE_FIN_WAIT2:
 	case NES_CM_STATE_FIN_WAIT1:
 	case NES_CM_STATE_LAST_ACK:
 		cm_node->cm_id->rem_ref(cm_node->cm_id);
@@ -2777,6 +2776,12 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		return -EINVAL;
 	}
 
+	passive_state = atomic_add_return(1, &cm_node->passive_state);
+	if (passive_state == NES_SEND_RESET_EVENT) {
+		rem_ref_cm_node(cm_node->cm_core, cm_node);
+		return -ECONNRESET;
+	}
+
 	/* associate the node with the QP */
 	nesqp->cm_node = (void *)cm_node;
 	cm_node->nesqp = nesqp;
@@ -2979,9 +2984,6 @@ int nes_accept(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
 		printk(KERN_ERR "%s[%u] OFA CM event_handler returned, "
 			"ret=%d\n", __func__, __LINE__, ret);
 
-	passive_state = atomic_add_return(1, &cm_node->passive_state);
-	if (passive_state == NES_SEND_RESET_EVENT)
-		create_event(cm_node, NES_CM_EVENT_RESET);
 	return 0;
 }
 

From 67d70721151726286763209ecadc3fce86abfdce Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Sat, 14 Aug 2010 21:05:04 +0000
Subject: [PATCH 190/728] RDMA/nes: Change state to closing after FIN

When the driver receives an AE for FIN received, it closes the
connection without changing the state of the connection in the
hardware to closing.  By changing the state to closing, hardware will
do a normal close sequence.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_hw.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index f8233c851c69..ba93a8be6bf6 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -3468,6 +3468,18 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 				return; /* Ignore it, wait for close complete */
 
 			if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
+				if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) &&
+					(nesqp->ibqp_state == IB_QPS_RTS)) {
+					spin_lock_irqsave(&nesqp->lock, flags);
+					nesqp->hw_iwarp_state = iwarp_state;
+					nesqp->hw_tcp_state = tcp_state;
+					nesqp->last_aeq = async_event_id;
+					next_iwarp_state = NES_CQP_QP_IWARP_STATE_CLOSING;
+					nesqp->hw_iwarp_state = NES_AEQE_IWARP_STATE_CLOSING;
+					spin_unlock_irqrestore(&nesqp->lock, flags);
+					nes_hw_modify_qp(nesdev, nesqp, next_iwarp_state, 0, 0);
+					nes_cm_disconn(nesqp);
+				}
 				nesqp->cm_id->add_ref(nesqp->cm_id);
 				schedule_nes_timer(nesqp->cm_node, (struct sk_buff *)nesqp,
 						NES_TIMER_TYPE_CLOSE, 1, 0);
@@ -3477,7 +3489,6 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 						nesqp->hwqp.qp_id, atomic_read(&nesqp->refcount),
 						async_event_id, nesqp->last_aeq, tcp_state);
 			}
-
 			break;
 		case NES_AEQE_AEID_LLP_CLOSE_COMPLETE:
 			if (nesqp->term_flags) {

From 29da03b9d1c6f24548d98cebda1e15a25d80ee1b Mon Sep 17 00:00:00 2001
From: Faisal Latif <faisal.latif@intel.com>
Date: Wed, 1 Sep 2010 15:43:11 +0000
Subject: [PATCH 191/728] RDMA/nes: Fix hang with modified FIN handling on A0
 cards

Changing state to CLOSING when FIN is received causes A0 cards to
hang.  Fix this by checking for A0 cards in FIN handling.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_hw.c | 3 ++-
 drivers/infiniband/hw/nes/nes_hw.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index ba93a8be6bf6..1980a461c499 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -3469,7 +3469,8 @@ static void nes_process_iwarp_aeqe(struct nes_device *nesdev,
 
 			if (atomic_inc_return(&nesqp->close_timer_started) == 1) {
 				if ((tcp_state == NES_AEQE_TCP_STATE_CLOSE_WAIT) &&
-					(nesqp->ibqp_state == IB_QPS_RTS)) {
+					(nesqp->ibqp_state == IB_QPS_RTS) &&
+					((nesadapter->eeprom_version >> 16) != NES_A0)) {
 					spin_lock_irqsave(&nesqp->lock, flags);
 					nesqp->hw_iwarp_state = iwarp_state;
 					nesqp->hw_tcp_state = tcp_state;
diff --git a/drivers/infiniband/hw/nes/nes_hw.h b/drivers/infiniband/hw/nes/nes_hw.h
index aa9183db32b1..1204c3432b63 100644
--- a/drivers/infiniband/hw/nes/nes_hw.h
+++ b/drivers/infiniband/hw/nes/nes_hw.h
@@ -45,6 +45,7 @@
 #define NES_PHY_TYPE_KR	       9
 
 #define NES_MULTICAST_PF_MAX 8
+#define NES_A0 3
 
 enum pci_regs {
 	NES_INT_STAT = 0x0000,

From 152e1d592071c8b312bb898bc1118b64e4aea535 Mon Sep 17 00:00:00 2001
From: Colin Cross <ccross@android.com>
Date: Fri, 3 Sep 2010 01:24:07 +0200
Subject: [PATCH 192/728] PM: Prevent waiting forever on asynchronous resume
 after failing suspend

During suspend, the power.completion is expected to be set when a
device has not yet started suspending.  Set it on init to fix a
corner case where a device is resumed when its parent has never
suspended.

Consider three drivers, A, B, and C.  The parent of A is C, and C
has async_suspend set.  On boot, C->power.completion is initialized
to 0.

During the first suspend:
suspend_devices_and_enter(...)
 dpm_resume(...)
  device_suspend(A)
  device_suspend(B) returns error, aborts suspend
 dpm_resume_end(...)
   dpm_resume(...)
    device_resume(A)
     dpm_wait(A->parent == C)
      wait_for_completion(C->power.completion)

The wait_for_completion will never complete, because
complete_all(C->power.completion) will only be called from
device_suspend(C) or device_resume(C), neither of which is called
if suspend is aborted before C.

After a successful suspend->resume cycle, where B doesn't abort
suspend, C->power.completion is left in the completed state by the
call to device_resume(C), and the same call path will work if B
aborts suspend.

Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/base/power/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 5419a49ff135..276d5a701dc3 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -59,6 +59,7 @@ void device_pm_init(struct device *dev)
 {
 	dev->power.status = DPM_ON;
 	init_completion(&dev->power.completion);
+	complete_all(&dev->power.completion);
 	dev->power.wakeup_count = 0;
 	pm_runtime_init(dev);
 }

From b19f8200392db88d529576a4f8178d08b70047be Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 8 Sep 2010 20:57:59 -0700
Subject: [PATCH 193/728] sparc: Kill all BKL usage.

They were all bogus artifacts and completely unnecessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sys_sparc_32.c | 2 --
 arch/sparc/kernel/unaligned_32.c | 3 +--
 arch/sparc/kernel/windows.c      | 2 --
 3 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index ee995b7dae7e..de45de4851e9 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -166,7 +166,6 @@ sparc_breakpoint (struct pt_regs *regs)
 {
 	siginfo_t info;
 
-	lock_kernel();
 #ifdef DEBUG_SPARC_BREAKPOINT
         printk ("TRAP: Entering kernel PC=%x, nPC=%x\n", regs->pc, regs->npc);
 #endif
@@ -180,7 +179,6 @@ sparc_breakpoint (struct pt_regs *regs)
 #ifdef DEBUG_SPARC_BREAKPOINT
 	printk ("TRAP: Returning to space: PC=%x nPC=%x\n", regs->pc, regs->npc);
 #endif
-	unlock_kernel();
 }
 
 asmlinkage int
diff --git a/arch/sparc/kernel/unaligned_32.c b/arch/sparc/kernel/unaligned_32.c
index f8514e291e15..12b9f352595f 100644
--- a/arch/sparc/kernel/unaligned_32.c
+++ b/arch/sparc/kernel/unaligned_32.c
@@ -323,7 +323,6 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 {
 	enum direction dir;
 
-	lock_kernel();
 	if(!(current->thread.flags & SPARC_FLAG_UNALIGNED) ||
 	   (((insn >> 30) & 3) != 3))
 		goto kill_user;
@@ -377,5 +376,5 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 kill_user:
 	user_mna_trap_fault(regs, insn);
 out:
-	unlock_kernel();
+	;
 }
diff --git a/arch/sparc/kernel/windows.c b/arch/sparc/kernel/windows.c
index f24d298bda29..b351770cbdd6 100644
--- a/arch/sparc/kernel/windows.c
+++ b/arch/sparc/kernel/windows.c
@@ -112,7 +112,6 @@ void try_to_clear_window_buffer(struct pt_regs *regs, int who)
 	struct thread_info *tp = current_thread_info();
 	int window;
 
-	lock_kernel();
 	flush_user_windows();
 	for(window = 0; window < tp->w_saved; window++) {
 		unsigned long sp = tp->rwbuf_stkptrs[window];
@@ -123,5 +122,4 @@ void try_to_clear_window_buffer(struct pt_regs *regs, int who)
 			do_exit(SIGILL);
 	}
 	tp->w_saved = 0;
-	unlock_kernel();
 }

From 25c8e03bdb769dfe2381f8b7942f05b0eb4bdf31 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 6 Sep 2010 11:02:12 +0200
Subject: [PATCH 194/728] spi/pl022: move probe call to subsys_initcall()

The PL022 SPI bus is sometimes used for early stuff like
regulators that need to be present at module_init() time, so
we move this to a subsys_initcall().

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/amba-pl022.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 80613abe961d..4c37c4e28647 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -1983,7 +1983,7 @@ static int __init pl022_init(void)
 	return amba_driver_register(&pl022_driver);
 }
 
-module_init(pl022_init);
+subsys_initcall(pl022_init);
 
 static void __exit pl022_exit(void)
 {

From a7a13d0676335a7dc9dd72264cca02606e43aaba Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Thu, 9 Sep 2010 00:11:41 +0200
Subject: [PATCH 195/728] ALSA: rawmidi: fix the get next midi device ioctl

If we pass in a device which is higher than SNDRV_RAWMIDI_DEVICES then
the "next device" should be -1.  This function just returns device + 1.

But the main thing is that "device + 1" can lead to a (harmless) integer
overflow and that annoys static analysis tools.

[fix the case for device == SNDRV_RAWMIDI_DEVICE by tiwai]

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/rawmidi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c
index eb68326c37d4..a7868ad4d530 100644
--- a/sound/core/rawmidi.c
+++ b/sound/core/rawmidi.c
@@ -829,6 +829,8 @@ static int snd_rawmidi_control_ioctl(struct snd_card *card,
 		
 		if (get_user(device, (int __user *)argp))
 			return -EFAULT;
+		if (device >= SNDRV_RAWMIDI_DEVICES) /* next device is -1 */
+			device = SNDRV_RAWMIDI_DEVICES - 1;
 		mutex_lock(&register_mutex);
 		device = device < 0 ? 0 : device + 1;
 		while (device < SNDRV_RAWMIDI_DEVICES) {

From 7839d956fc6aecbb66d645b4050e8e88e2e821cd Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 9 Sep 2010 00:02:03 +0100
Subject: [PATCH 196/728] drm/i915: Double check that the wait_request is not
 pending before warning

If we are busy, then we may have woken up the wait_request handler but
not yet serviced it before the hang check fires. So in hang check,
double check that the i915_gem_do_wait_request() is still pending the
wake-up before declaring all hope lost.

Fixes regression with e78d73b16bcde921c9cf458d2e4de8e4fc2518f3.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30073
Reported-and-tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_irq.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 59457e83b011..744225ebb4b2 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1350,17 +1350,25 @@ void i915_hangcheck_elapsed(unsigned long data)
 		i915_seqno_passed(i915_get_gem_seqno(dev,
 				&dev_priv->render_ring),
 			i915_get_tail_request(dev)->seqno)) {
+		bool missed_wakeup = false;
+
 		dev_priv->hangcheck_count = 0;
 
 		/* Issue a wake-up to catch stuck h/w. */
-		if (dev_priv->render_ring.waiting_gem_seqno |
-		    dev_priv->bsd_ring.waiting_gem_seqno) {
-			DRM_ERROR("Hangcheck timer elapsed... GPU idle, missed IRQ.\n");
-			if (dev_priv->render_ring.waiting_gem_seqno)
-				DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
-			if (dev_priv->bsd_ring.waiting_gem_seqno)
-				DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
+		if (dev_priv->render_ring.waiting_gem_seqno &&
+		    waitqueue_active(&dev_priv->render_ring.irq_queue)) {
+			DRM_WAKEUP(&dev_priv->render_ring.irq_queue);
+			missed_wakeup = true;
 		}
+
+		if (dev_priv->bsd_ring.waiting_gem_seqno &&
+		    waitqueue_active(&dev_priv->bsd_ring.irq_queue)) {
+			DRM_WAKEUP(&dev_priv->bsd_ring.irq_queue);
+			missed_wakeup = true;
+		}
+
+		if (missed_wakeup)
+			DRM_ERROR("Hangcheck timer elapsed... GPU idle, missed IRQ.\n");
 		return;
 	}
 

From d530148ae8bffe1b33f50d1776d185a6e85dc774 Mon Sep 17 00:00:00 2001
From: Shaohua Li <shaohua.li@intel.com>
Date: Fri, 20 Aug 2010 16:49:43 +0800
Subject: [PATCH 197/728] dquot: do full inode dirty in allocating space

Alex Shi found a regression when doing ffsb test. The test has several threads,
and each thread creates a small file, write to it and then delete it. ffsb
reports about 20% regression and Alex bisected it to 43d2932d88e4. The test
will call __mark_inode_dirty 3 times. without this commit, we only take
inode_lock one time, while with it, we take the lock 3 times with flags (
I_DIRTY_SYNC,I_DIRTY_PAGES,I_DIRTY). Perf shows the lock contention increased
too much. Below proposed patch fixes it.

fs is allocating blocks, which usually means file writes and the inode
will be dirtied soon. We fully dirty the inode to reduce some inode_lock
contention in several calls of __mark_inode_dirty.

Jan Kara: Added comment.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
---
 include/linux/quotaops.h | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h
index d50ba858cfe0..d1a9193960f1 100644
--- a/include/linux/quotaops.h
+++ b/include/linux/quotaops.h
@@ -274,8 +274,14 @@ static inline int dquot_alloc_space(struct inode *inode, qsize_t nr)
 	int ret;
 
 	ret = dquot_alloc_space_nodirty(inode, nr);
-	if (!ret)
-		mark_inode_dirty_sync(inode);
+	if (!ret) {
+		/*
+		 * Mark inode fully dirty. Since we are allocating blocks, inode
+		 * would become fully dirty soon anyway and it reportedly
+		 * reduces inode_lock contention.
+		 */
+		mark_inode_dirty(inode);
+	}
 	return ret;
 }
 

From 3a5c19c23db65a554f2e4f5df5f307c668277056 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@suse.de>
Date: Mon, 16 Aug 2010 10:06:26 -0500
Subject: [PATCH 198/728] [SCSI] fix use-after-free in scsi_init_io()

we're using a pointer through a freed command to reset the request,
which has shown up as an oops with slab poisoning:

Reported-by: Tejun Heo <tj@kernel.org>
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 drivers/scsi/scsi_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9ade720422c6..ee02d3838a0a 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1011,8 +1011,8 @@ int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
 
 err_exit:
 	scsi_release_buffers(cmd);
-	scsi_put_command(cmd);
 	cmd->request->special = NULL;
+	scsi_put_command(cmd);
 	return error;
 }
 EXPORT_SYMBOL(scsi_init_io);

From 39aa3cb3e8250db9188a6f1e3fb62ffa1a717678 Mon Sep 17 00:00:00 2001
From: Stefan Bader <stefan.bader@canonical.com>
Date: Tue, 31 Aug 2010 15:52:27 +0200
Subject: [PATCH 199/728] mm: Move vma_stack_continue into mm.h

So it can be used by all that need to check for that.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/task_mmu.c | 3 ++-
 include/linux/mm.h | 6 ++++++
 mm/mlock.c         | 6 ------
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 439fc1f1c1c4..271afc48b9a5 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -224,7 +224,8 @@ static void show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
 	/* We don't show the stack guard page in /proc/maps */
 	start = vma->vm_start;
 	if (vma->vm_flags & VM_GROWSDOWN)
-		start += PAGE_SIZE;
+		if (!vma_stack_continue(vma->vm_prev, vma->vm_start))
+			start += PAGE_SIZE;
 
 	seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 			start,
diff --git a/include/linux/mm.h b/include/linux/mm.h
index e6b1210772ce..74949fbef8c6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -864,6 +864,12 @@ int set_page_dirty(struct page *page);
 int set_page_dirty_lock(struct page *page);
 int clear_page_dirty_for_io(struct page *page);
 
+/* Is the vma a continuation of the stack vma above it? */
+static inline int vma_stack_continue(struct vm_area_struct *vma, unsigned long addr)
+{
+	return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN);
+}
+
 extern unsigned long move_page_tables(struct vm_area_struct *vma,
 		unsigned long old_addr, struct vm_area_struct *new_vma,
 		unsigned long new_addr, unsigned long len);
diff --git a/mm/mlock.c b/mm/mlock.c
index cbae7c5b9568..b70919ce4f72 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -135,12 +135,6 @@ void munlock_vma_page(struct page *page)
 	}
 }
 
-/* Is the vma a continuation of the stack vma above it? */
-static inline int vma_stack_continue(struct vm_area_struct *vma, unsigned long addr)
-{
-	return vma && (vma->vm_end == addr) && (vma->vm_flags & VM_GROWSDOWN);
-}
-
 static inline int stack_guard_page(struct vm_area_struct *vma, unsigned long addr)
 {
 	return (vma->vm_flags & VM_GROWSDOWN) &&

From a73f8844e1fc54c3762555c1cf1f71774142ca91 Mon Sep 17 00:00:00 2001
From: Jonathan Corbet <corbet@lwn.net>
Date: Wed, 8 Sep 2010 16:54:54 -0600
Subject: [PATCH 200/728] lglock: make lg_lock_global() actually lock globally

lg_lock_global() currently only acquires spinlocks for online CPUs, but
it's meant to lock all possible CPUs.  Lglock-protected resources may be
associated with removed CPUs - and, indeed, that could happen with the
per-superblock open files lists.

At Nick's suggestion, change for_each_online_cpu() to
for_each_possible_cpu() to protect accesses to those resources.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/lglock.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/lglock.h b/include/linux/lglock.h
index b288cb713b90..f549056fb20b 100644
--- a/include/linux/lglock.h
+++ b/include/linux/lglock.h
@@ -150,7 +150,7 @@
 	int i;								\
 	preempt_disable();						\
 	rwlock_acquire(&name##_lock_dep_map, 0, 0, _RET_IP_);		\
-	for_each_online_cpu(i) {					\
+	for_each_possible_cpu(i) {					\
 		arch_spinlock_t *lock;					\
 		lock = &per_cpu(name##_lock, i);			\
 		arch_spin_lock(lock);					\
@@ -161,7 +161,7 @@
  void name##_global_unlock(void) {					\
 	int i;								\
 	rwlock_release(&name##_lock_dep_map, 1, _RET_IP_);		\
-	for_each_online_cpu(i) {					\
+	for_each_possible_cpu(i) {					\
 		arch_spinlock_t *lock;					\
 		lock = &per_cpu(name##_lock, i);			\
 		arch_spin_unlock(lock);					\

From da908f2fb4e783c2a4de751fb90f11a0dd041161 Mon Sep 17 00:00:00 2001
From: Zachary Amsden <zamsden@redhat.com>
Date: Thu, 19 Aug 2010 22:07:27 -1000
Subject: [PATCH 201/728] KVM: x86: Perform hardware_enable in CPU_STARTING
 callback

The CPU_STARTING callback was added upstream with the intention
of being used for KVM, specifically for the hardware enablement
that must be done before we can run in hardware virt.  It had
bugs on the x86_64 architecture at the time, where it was called
after CPU_ONLINE.  The arches have since merged and the bug is
gone.

It might be noted other features should probably start making
use of this callback; microcode updates in particular which
might be fixing important erratums would be best applied before
beginning to run user tasks.

Signed-off-by: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 virt/kvm/kvm_main.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index b78b794c1039..d4853a54771a 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1958,10 +1958,10 @@ static int kvm_cpu_hotplug(struct notifier_block *notifier, unsigned long val,
 		       cpu);
 		hardware_disable(NULL);
 		break;
-	case CPU_ONLINE:
+	case CPU_STARTING:
 		printk(KERN_INFO "kvm: enabling virtualization on CPU%d\n",
 		       cpu);
-		smp_call_function_single(cpu, hardware_enable, NULL, 1);
+		hardware_enable(NULL);
 		break;
 	}
 	return NOTIFY_OK;
@@ -2096,7 +2096,6 @@ int kvm_io_bus_unregister_dev(struct kvm *kvm, enum kvm_bus bus_idx,
 
 static struct notifier_block kvm_cpu_notifier = {
 	.notifier_call = kvm_cpu_hotplug,
-	.priority = 20, /* must be > scheduler priority */
 };
 
 static int vm_stat_get(void *_offset, u64 *val)

From 5afddee415c829704d3a91031ae634008bc332e9 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Thu, 9 Sep 2010 19:58:23 +0200
Subject: [PATCH 202/728] AT91: clock: peripheral clocks can have other parent
 than mck

While registering clock allow to set parent clock other
than mck. It is useful for clocks than can be seen as
child clock of a peripheral.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
---
 arch/arm/mach-at91/clock.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7f7da439341f..7525cee3983f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -501,7 +501,8 @@ postcore_initcall(at91_clk_debugfs_init);
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
-		clk->parent = &mck;
+		if (!clk->parent)
+			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
 		list_add_tail(&clk->node, &clocks);
 	}

From ab64511cbbd03196d84bcc32c6e7b9d46543df7b Mon Sep 17 00:00:00 2001
From: Fabian Godehardt <fg@emlix.com>
Date: Fri, 3 Sep 2010 13:31:33 +0100
Subject: [PATCH 203/728] AT91: SAM9G45 - add a separate clock entry for every
 single TC block

Without this patch you will not be able to register the first block
because of the second association call on at91_add_device_tc().

Signed-off-by: Fabian Godehardt <fg@emlix.com>
[nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk]
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/at91sam9g45.c         | 15 ++++++++++++---
 arch/arm/mach-at91/at91sam9g45_devices.c |  4 ++--
 2 files changed, 14 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 753c0d31a3d3..c67b47f1c0fd 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -121,8 +121,8 @@ static struct clk ssc1_clk = {
 	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
 	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -192,6 +192,14 @@ static struct clk ohci_clk = {
 	.parent		= &uhphs_clk,
 };
 
+/* One additional fake clock for second TC block */
+static struct clk tcb1_clk = {
+	.name		= "tcb1_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &tcb0_clk,
+};
+
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -208,7 +216,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi1_clk,
 	&ssc0_clk,
 	&ssc1_clk,
-	&tcb_clk,
+	&tcb0_clk,
 	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
@@ -221,6 +229,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&mmc1_clk,
 	// irq0
 	&ohci_clk,
+	&tcb1_clk,
 };
 
 /*
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 501ac6fae2e7..5e71ccd5e7d3 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -835,9 +835,9 @@ static struct platform_device at91sam9g45_tcb1_device = {
 static void __init at91_add_device_tc(void)
 {
 	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else

From 673424c0890a00e22398017c9adf999577526220 Mon Sep 17 00:00:00 2001
From: Jean Delvare <jdelvare@suse.de>
Date: Mon, 30 Aug 2010 17:37:05 +0200
Subject: [PATCH 204/728] pata_artop: Fix device ID parity check

x % 1 always evaluates to 0, which clearly isn't the intent. The
author probably had "% 2" or "& 1" in mind, and mispelled it.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_artop.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index ba43f0f8c880..2215632e4b31 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -74,7 +74,8 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	/* Odd numbered device ids are the units with enable bits (the -R cards) */
-	if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
+	if ((pdev->device & 1) &&
+	    !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
 
 	return ata_sff_prereset(link, deadline);

From f1f5a807b051eddd3f302e503d39214e5bde0ef2 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 27 Aug 2010 11:09:15 +0200
Subject: [PATCH 205/728] ahci: fix hang on failed softreset

ahci_do_softreset() compared the current time and deadline in reverse
when calculating timeout for SRST issue.  The result is that if
@deadline is in future, SRST is issued with 0 timeout, which hasn't
caused any problem because it later waits for DRDY with the correct
timeout.  If deadline is already exceeded by the time SRST is about to
be issued, the timeout calculation underflows and if the device
doesn't respond, timeout doesn't trigger for a _very_ long time.

Reverse the incorrect comparison order.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Anssi Hannula <anssi.hannula@iki.fi>
Tested-by: Gwendal Grignou <gwendal@google.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libahci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 666850d31df2..68dc6785472f 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1326,7 +1326,7 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 	/* issue the first D2H Register FIS */
 	msecs = 0;
 	now = jiffies;
-	if (time_after(now, deadline))
+	if (time_after(deadline, now))
 		msecs = jiffies_to_msecs(deadline - now);
 
 	tf.ctl |= ATA_SRST;

From 9cb627d5f38830ca19aa0dca52d1d3a633018bf7 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Wed, 1 Sep 2010 12:58:43 +0200
Subject: [PATCH 206/728] perf, trace: Fix module leak

Commit 1c024eca (perf, trace: Optimize tracepoints by using
per-tracepoint-per-cpu hlist to track events) caused a module
refcount leak.

Reported-And-Tested-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4C7E1F12.8030304@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/trace/trace_event_perf.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 000e6e85b445..31cc4cb0dbf2 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -91,6 +91,8 @@ int perf_trace_init(struct perf_event *p_event)
 		    tp_event->class && tp_event->class->reg &&
 		    try_module_get(tp_event->mod)) {
 			ret = perf_trace_event_init(tp_event, p_event);
+			if (ret)
+				module_put(tp_event->mod);
 			break;
 		}
 	}
@@ -146,6 +148,7 @@ void perf_trace_destroy(struct perf_event *p_event)
 		}
 	}
 out:
+	module_put(tp_event->mod);
 	mutex_unlock(&event_mutex);
 }
 

From 5e11637e2c929e34dcc0fbbfb48bdb638937701a Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Fri, 11 Jun 2010 13:35:08 +0200
Subject: [PATCH 207/728] perf: Fix CPU hotplug

Since we have UP_PREPARE, we should also have UP_CANCELED.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/perf_event.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 657555a5f30f..db5b56064687 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -5761,15 +5761,15 @@ perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (long)hcpu;
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 
 	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
+	case CPU_DOWN_FAILED:
 		perf_event_init_cpu(cpu);
 		break;
 
+	case CPU_UP_CANCELED:
 	case CPU_DOWN_PREPARE:
-	case CPU_DOWN_PREPARE_FROZEN:
 		perf_event_exit_cpu(cpu);
 		break;
 

From da2b71edd8a7db44fe1746261410a981f3e03632 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Mon, 23 Aug 2010 13:42:51 -0700
Subject: [PATCH 208/728] sched: Move sched_avg_update() to update_cpu_load()

Currently sched_avg_update() (which updates rt_avg stats in the rq)
is getting called from scale_rt_power() (in the load balance context)
which doesn't take rq->lock.

Fix it by moving the sched_avg_update() to more appropriate
update_cpu_load() where the CFS load gets updated as well.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1282596171.2694.3.camel@sbsiddha-MOBL3>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c      | 6 ++++++
 kernel/sched_fair.c | 2 --
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 09b574e7f4df..ed09d4f2a69c 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1294,6 +1294,10 @@ static void resched_task(struct task_struct *p)
 static void sched_rt_avg_update(struct rq *rq, u64 rt_delta)
 {
 }
+
+static void sched_avg_update(struct rq *rq)
+{
+}
 #endif /* CONFIG_SMP */
 
 #if BITS_PER_LONG == 32
@@ -3182,6 +3186,8 @@ static void update_cpu_load(struct rq *this_rq)
 
 		this_rq->cpu_load[i] = (old_load * (scale - 1) + new_load) >> i;
 	}
+
+	sched_avg_update(this_rq);
 }
 
 static void update_cpu_load_active(struct rq *this_rq)
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index ab661ebc4895..f53ec7550056 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -2268,8 +2268,6 @@ unsigned long scale_rt_power(int cpu)
 	struct rq *rq = cpu_rq(cpu);
 	u64 total, available;
 
-	sched_avg_update(rq);
-
 	total = sched_avg_period() + (rq->clock - rq->age_stamp);
 	available = total - rq->rt_avg;
 

From 0e52247a2ed1f211f0c4f682dc999610a368903f Mon Sep 17 00:00:00 2001
From: Cam Macdonell <cam@cs.ualberta.ca>
Date: Tue, 7 Sep 2010 17:25:20 -0700
Subject: [PATCH 209/728] PCI: fix pci_resource_alignment prototype

This fixes the prototype for both pci_resource_alignment() and
pci_sriov_resource_alignment().

Patch started as debugging effort from Cam Macdonell.

Cc: Cam Macdonell <cam@cs.ualberta.ca>
Cc: Avi Kivity <avi@redhat.com>
[chrisw: add iov bits]
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/iov.c | 2 +-
 drivers/pci/pci.h | 5 +++--
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index ce6a3666b3d9..553d8ee55c1c 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -608,7 +608,7 @@ int pci_iov_resource_bar(struct pci_dev *dev, int resno,
  * the VF BAR size multiplied by the number of VFs.  The alignment
  * is just the VF BAR size.
  */
-int pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
+resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
 {
 	struct resource tmp;
 	enum pci_bar_type type;
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 7754a678ab15..6beb11b617a9 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -264,7 +264,8 @@ extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
 extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
 				enum pci_bar_type *type);
-extern int pci_sriov_resource_alignment(struct pci_dev *dev, int resno);
+extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
+						    int resno);
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
 
@@ -320,7 +321,7 @@ static inline int pci_ats_enabled(struct pci_dev *dev)
 }
 #endif /* CONFIG_PCI_IOV */
 
-static inline int pci_resource_alignment(struct pci_dev *dev,
+static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
 					 struct resource *res)
 {
 #ifdef CONFIG_PCI_IOV

From 85e00b55517a5696282b80836655e6b6f5702df0 Mon Sep 17 00:00:00 2001
From: Jovi Zhang <bookjovi@gmail.com>
Date: Thu, 9 Sep 2010 13:30:59 -0300
Subject: [PATCH 210/728] perf symbols: Fix multiple initialization of symbol
 system

By returning immediately if it was already initialized, do it as well at
symbol__exit, refusing multiple deinitializations.

This fixes problems in the kmem, sched and timechart commands.

Reported-by: Davidlohr Bueso <dave@gnu.org>
Cc: Davidlohr Bueso <dave@gnu.org>
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
LKML-Reference: AANLkTi=9Cn=R8SPMCRp5z+gEjXbaBHeb-AaOtRbuwwcn@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/symbol.c | 7 +++++++
 tools/perf/util/symbol.h | 3 ++-
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 1a367734e016..b2f5ae97f33d 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -2268,6 +2268,9 @@ static int setup_list(struct strlist **list, const char *list_str,
 
 int symbol__init(void)
 {
+	if (symbol_conf.initialized)
+		return 0;
+
 	elf_version(EV_CURRENT);
 	if (symbol_conf.sort_by_name)
 		symbol_conf.priv_size += (sizeof(struct symbol_name_rb_node) -
@@ -2293,6 +2296,7 @@ int symbol__init(void)
 		       symbol_conf.sym_list_str, "symbol") < 0)
 		goto out_free_comm_list;
 
+	symbol_conf.initialized = true;
 	return 0;
 
 out_free_dso_list:
@@ -2304,11 +2308,14 @@ out_free_comm_list:
 
 void symbol__exit(void)
 {
+	if (!symbol_conf.initialized)
+		return;
 	strlist__delete(symbol_conf.sym_list);
 	strlist__delete(symbol_conf.dso_list);
 	strlist__delete(symbol_conf.comm_list);
 	vmlinux_path__exit();
 	symbol_conf.sym_list = symbol_conf.dso_list = symbol_conf.comm_list = NULL;
+	symbol_conf.initialized = false;
 }
 
 int machines__create_kernel_maps(struct rb_root *self, pid_t pid)
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index b7a8da4af5a0..ea95c2756f05 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -69,7 +69,8 @@ struct symbol_conf {
 			show_nr_samples,
 			use_callchain,
 			exclude_other,
-			show_cpu_utilization;
+			show_cpu_utilization,
+			initialized;
 	const char	*vmlinux_name,
 			*source_prefix,
 			*field_sep;

From 9e84ed63dc71e13b62cea5ec6b0049260cca0b7a Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 9 Sep 2010 22:39:41 +0100
Subject: [PATCH 211/728] ARM: Partially revert "Auto calculate ZRELADDR and
 provide option for exceptions"
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Partially revert e69edc7, which introduced automatic zreladdr
support.  The change in the way the manual definition is defined
seems to be error and conflict prone.  Go back to the original way
we were handling this for the time being, while keeping the automatic
zreladdr facility.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                  | 91 -------------------------------
 arch/arm/boot/Makefile            |  8 ++-
 arch/arm/boot/compressed/Makefile |  4 ++
 arch/arm/boot/compressed/head.S   |  2 +-
 4 files changed, 10 insertions(+), 95 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 16bc8eb4901c..553b7cf17bfb 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1576,97 +1576,6 @@ config AUTO_ZRELADDR
 	  0xf8000000. This assumes the zImage being placed in the first 128MB
 	  from start of memory.
 
-config ZRELADDR
-	hex "Physical address of the decompressed kernel image"
-	depends on !AUTO_ZRELADDR
-	default 0x00008000 if ARCH_BCMRING ||\
-		ARCH_CNS3XXX ||\
-		ARCH_DOVE ||\
-		ARCH_EBSA110 ||\
-		ARCH_FOOTBRIDGE ||\
-		ARCH_INTEGRATOR ||\
-		ARCH_IOP13XX ||\
-		ARCH_IOP33X ||\
-		ARCH_IXP2000 ||\
-		ARCH_IXP23XX ||\
-		ARCH_IXP4XX ||\
-		ARCH_KIRKWOOD ||\
-		ARCH_KS8695 ||\
-		ARCH_LOKI ||\
-		ARCH_MMP ||\
-		ARCH_MV78XX0 ||\
-		ARCH_NOMADIK ||\
-		ARCH_NUC93X ||\
-		ARCH_NS9XXX ||\
-		ARCH_ORION5X ||\
-		ARCH_SPEAR3XX ||\
-		ARCH_SPEAR6XX ||\
-		ARCH_TEGRA ||\
-		ARCH_U8500 ||\
-		ARCH_VERSATILE ||\
-		ARCH_W90X900
-	default 0x08008000 if ARCH_MX1 ||\
-		ARCH_SHARK
-	default 0x10008000 if ARCH_MSM ||\
-		ARCH_OMAP1 ||\
-		ARCH_RPC
-	default 0x20008000 if ARCH_S5P6440 ||\
-		ARCH_S5P6442 ||\
-		ARCH_S5PC100 ||\
-		ARCH_S5PV210
-	default 0x30008000 if ARCH_S3C2410 ||\
-		ARCH_S3C2400 ||\
-		ARCH_S3C2412 ||\
-		ARCH_S3C2416 ||\
-		ARCH_S3C2440 ||\
-		ARCH_S3C2443
-	default 0x40008000 if ARCH_STMP378X ||\
-		ARCH_STMP37XX ||\
-		ARCH_SH7372 ||\
-		ARCH_SH7377 ||\
-		ARCH_S5PV310
-	default 0x50008000 if ARCH_S3C64XX ||\
-		ARCH_SH7367
-	default 0x60008000 if ARCH_VEXPRESS
-	default 0x80008000 if ARCH_MX25 ||\
-		ARCH_MX3 ||\
-		ARCH_NETX ||\
-		ARCH_OMAP2PLUS ||\
-		ARCH_PNX4008
-	default 0x90008000 if ARCH_MX5 ||\
-		ARCH_MX91231
-	default 0xa0008000 if ARCH_IOP32X ||\
-		ARCH_PXA ||\
-		MACH_MX27
-	default 0xc0008000 if ARCH_LH7A40X ||\
-		MACH_MX21
-	default 0xf0008000 if ARCH_AAEC2000 ||\
-		ARCH_L7200
-	default 0xc0028000 if ARCH_CLPS711X
-	default 0x70008000 if ARCH_AT91 && (ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-	default 0x20008000 if ARCH_AT91 && !(ARCH_AT91CAP9 || ARCH_AT91SAM9G45)
-	default 0xc0008000 if ARCH_DAVINCI && ARCH_DAVINCI_DA8XX
-	default 0x80008000 if ARCH_DAVINCI && !ARCH_DAVINCI_DA8XX
-	default 0x00008000 if ARCH_EP93XX && EP93XX_SDCE3_SYNC_PHYS_OFFSET
-	default 0xc0008000 if ARCH_EP93XX && EP93XX_SDCE0_PHYS_OFFSET
-	default 0xd0008000 if ARCH_EP93XX && EP93XX_SDCE1_PHYS_OFFSET
-	default 0xe0008000 if ARCH_EP93XX && EP93XX_SDCE2_PHYS_OFFSET
-	default 0xf0008000 if ARCH_EP93XX && EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-	default 0x00008000 if ARCH_GEMINI && GEMINI_MEM_SWAP
-	default 0x10008000 if ARCH_GEMINI && !GEMINI_MEM_SWAP
-	default 0x70008000 if ARCH_REALVIEW && REALVIEW_HIGH_PHYS_OFFSET
-	default 0x00008000 if ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET
-	default 0xc0208000 if ARCH_SA1100 && SA1111
-	default 0xc0008000 if ARCH_SA1100 && !SA1111
-	default 0x30108000 if ARCH_S3C2410 && PM_H1940
-	default 0x28E08000 if ARCH_U300 && MACH_U300_SINGLE_RAM
-	default 0x48008000 if ARCH_U300 && !MACH_U300_SINGLE_RAM
-	help
-	  ZRELADDR is the physical address where the decompressed kernel
-	  image will be placed. ZRELADDR has to be specified when the
-	  assumption of AUTO_ZRELADDR is not valid, or when ZBOOT_ROM is
-	  selected.
-
 endmenu
 
 menu "CPU Power Management"
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index f705213caa88..4a590f4113e2 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -14,16 +14,18 @@
 MKIMAGE         := $(srctree)/scripts/mkuboot.sh
 
 ifneq ($(MACHINE),)
--include $(srctree)/$(MACHINE)/Makefile.boot
+include $(srctree)/$(MACHINE)/Makefile.boot
 endif
 
 # Note: the following conditions must always be true:
+#   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
+ZRELADDR    := $(zreladdr-y)
 PARAMS_PHYS := $(params_phys-y)
 INITRD_PHYS := $(initrd_phys-y)
 
-export INITRD_PHYS PARAMS_PHYS
+export ZRELADDR INITRD_PHYS PARAMS_PHYS
 
 targets := Image zImage xipImage bootpImage uImage
 
@@ -65,7 +67,7 @@ quiet_cmd_uimage = UIMAGE  $@
 ifeq ($(CONFIG_ZBOOT_ROM),y)
 $(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
 else
-$(obj)/uImage: LOADADDR=$(CONFIG_ZRELADDR)
+$(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 68775e33476c..b23f6bc46cfa 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -79,6 +79,10 @@ endif
 EXTRA_CFLAGS  := -fpic -fno-builtin
 EXTRA_AFLAGS  := -Wa,-march=all
 
+# Supply ZRELADDR to the decompressor via a linker symbol.
+ifneq ($(CONFIG_AUTO_ZRELADDR),y)
+LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6af9907c3b5c..6825c34646d4 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -177,7 +177,7 @@ not_angel:
 		and	r4, pc, #0xf8000000
 		add	r4, r4, #TEXT_OFFSET
 #else
-		ldr	r4, =CONFIG_ZRELADDR
+		ldr	r4, =zreladdr
 #endif
 		subs	r0, r0, r1		@ calculate the delta offset
 

From a14d0404088a7b0d51bb5219baf33d77e5592007 Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Thu, 9 Sep 2010 22:43:02 +0100
Subject: [PATCH 212/728] ARM: Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 98 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 96 insertions(+), 2 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 48cbdcb6bbd4..55590a4d87c9 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 12 21:10:14 2010
+# Last update: Thu Sep 9 22:43:01 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2622,7 +2622,7 @@ kraken			MACH_KRAKEN		KRAKEN			2634
 gw2388			MACH_GW2388		GW2388			2635
 jadecpu			MACH_JADECPU		JADECPU			2636
 carlisle		MACH_CARLISLE		CARLISLE		2637
-lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+lux_sf9			MACH_LUX_SF9		LUX_SF9			2638
 nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
 terrier			MACH_TERRIER		TERRIER			2640
 turbot			MACH_TURBOT		TURBOT			2641
@@ -2950,3 +2950,97 @@ davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
 netviz			MACH_NETVIZ		NETVIZ			2964
 flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
 wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966
+lpc24xx			MACH_LPC24XX		LPC24XX			2967
+spica			MACH_SPICA		SPICA			2968
+gpsdisplay		MACH_GPSDISPLAY		GPSDISPLAY		2969
+bipnet			MACH_BIPNET		BIPNET			2970
+overo_ctu_inertial	MACH_OVERO_CTU_INERTIAL	OVERO_CTU_INERTIAL	2971
+davinci_dm355_mmm	MACH_DAVINCI_DM355_MMM	DAVINCI_DM355_MMM	2972
+pc9260_v2		MACH_PC9260_V2		PC9260_V2		2973
+ptx7545			MACH_PTX7545		PTX7545			2974
+tm_efdc			MACH_TM_EFDC		TM_EFDC			2975
+omap3_waldo1		MACH_OMAP3_WALDO1	OMAP3_WALDO1		2977
+flyer			MACH_FLYER		FLYER			2978
+tornado3240		MACH_TORNADO3240	TORNADO3240		2979
+soli_01			MACH_SOLI_01		SOLI_01			2980
+omapl138_europalc	MACH_OMAPL138_EUROPALC	OMAPL138_EUROPALC	2981
+helios_v1		MACH_HELIOS_V1		HELIOS_V1		2982
+netspace_lite_v2	MACH_NETSPACE_LITE_V2	NETSPACE_LITE_V2	2983
+ssc			MACH_SSC		SSC			2984
+premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
+wasabi			MACH_WASABI		WASABI			2986
+vivow			MACH_VIVOW		VIVOW			2987
+mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
+universal		MACH_UNIVERSAL		UNIVERSAL		2989
+real6410		MACH_REAL6410		REAL6410		2990
+spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
+ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
+omap3_bc10		MACH_OMAP3_BC10		OMAP3_BC10		2993
+thebe			MACH_THEBE		THEBE			2994
+rv082			MACH_RV082		RV082			2995
+armlguest		MACH_ARMLGUEST		ARMLGUEST		2996
+tjinc1000		MACH_TJINC1000		TJINC1000		2997
+dockstar		MACH_DOCKSTAR		DOCKSTAR		2998
+ax8008			MACH_AX8008		AX8008			2999
+gnet_sgce		MACH_GNET_SGCE		GNET_SGCE		3000
+pxwnas_500_1000		MACH_PXWNAS_500_1000	PXWNAS_500_1000		3001
+ea20			MACH_EA20		EA20			3002
+awm2			MACH_AWM2		AWM2			3003
+ti8148evm		MACH_TI8148EVM		TI8148EVM		3004
+tegra_seaboard		MACH_TEGRA_SEABOARD	TEGRA_SEABOARD		3005
+linkstation_chlv2	MACH_LINKSTATION_CHLV2	LINKSTATION_CHLV2	3006
+tera_pro2_rack		MACH_TERA_PRO2_RACK	TERA_PRO2_RACK		3007
+rubys			MACH_RUBYS		RUBYS			3008
+aquarius		MACH_AQUARIUS		AQUARIUS		3009
+mx53_ard		MACH_MX53_ARD		MX53_ARD		3010
+mx53_smd		MACH_MX53_SMD		MX53_SMD		3011
+lswxl			MACH_LSWXL		LSWXL			3012
+dove_avng_v3		MACH_DOVE_AVNG_V3	DOVE_AVNG_V3		3013
+sdi_ess_9263		MACH_SDI_ESS_9263	SDI_ESS_9263		3014
+jocpu550		MACH_JOCPU550		JOCPU550		3015
+msm8x60_rumi3		MACH_MSM8X60_RUMI3	MSM8X60_RUMI3		3016
+msm8x60_ffa		MACH_MSM8X60_FFA	MSM8X60_FFA		3017
+yanomami		MACH_YANOMAMI		YANOMAMI		3018
+gta04			MACH_GTA04		GTA04			3019
+cm_a510			MACH_CM_A510		CM_A510			3020
+omap3_rfs200		MACH_OMAP3_RFS200	OMAP3_RFS200		3021
+kx33xx			MACH_KX33XX		KX33XX			3022
+ptx7510			MACH_PTX7510		PTX7510			3023
+top9000			MACH_TOP9000		TOP9000			3024
+teenote			MACH_TEENOTE		TEENOTE			3025
+ts3			MACH_TS3		TS3			3026
+a0			MACH_A0			A0			3027
+fsm9xxx_surf		MACH_FSM9XXX_SURF	FSM9XXX_SURF		3028
+fsm9xxx_ffa		MACH_FSM9XXX_FFA	FSM9XXX_FFA		3029
+frrhwcdma60w		MACH_FRRHWCDMA60W	FRRHWCDMA60W		3030
+remus			MACH_REMUS		REMUS			3031
+at91cap7xdk		MACH_AT91CAP7XDK	AT91CAP7XDK		3032
+at91cap7stk		MACH_AT91CAP7STK	AT91CAP7STK		3033
+kt_sbc_sam9_1		MACH_KT_SBC_SAM9_1	KT_SBC_SAM9_1		3034
+oratisrouter		MACH_ORATISROUTER	ORATISROUTER		3035
+armada_xp_db		MACH_ARMADA_XP_DB	ARMADA_XP_DB		3036
+spdm			MACH_SPDM		SPDM			3037
+gtib			MACH_GTIB		GTIB			3038
+dgm3240			MACH_DGM3240		DGM3240			3039
+atlas_i_lpe		MACH_ATLAS_I_LPE	ATLAS_I_LPE		3040
+htcmega			MACH_HTCMEGA		HTCMEGA			3041
+tricorder		MACH_TRICORDER		TRICORDER		3042
+tx28			MACH_TX28		TX28			3043
+bstbrd			MACH_BSTBRD		BSTBRD			3044
+pwb3090			MACH_PWB3090		PWB3090			3045
+idea6410		MACH_IDEA6410		IDEA6410		3046
+qbc9263			MACH_QBC9263		QBC9263			3047
+borabora		MACH_BORABORA		BORABORA		3048
+valdez			MACH_VALDEZ		VALDEZ			3049
+ls9g20			MACH_LS9G20		LS9G20			3050
+mios_v1			MACH_MIOS_V1		MIOS_V1			3051
+s5pc110_crespo		MACH_S5PC110_CRESPO	S5PC110_CRESPO		3052
+controltek9g20		MACH_CONTROLTEK9G20	CONTROLTEK9G20		3053
+tin307			MACH_TIN307		TIN307			3054
+tin510			MACH_TIN510		TIN510			3055
+bluecheese		MACH_BLUECHEESE		BLUECHEESE		3057
+tem3x30			MACH_TEM3X30		TEM3X30			3058
+harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
+msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
+spear900		MACH_SPEAR900		SPEAR900		3061
+pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062

From f574c843191728d9407b766a027f779dcd27b272 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Thu, 9 Sep 2010 15:16:56 -0700
Subject: [PATCH 213/728] [IA64] fix siglock

When ia64 converted to using ticket locks, an inline implementation
of trylock/unlock in fsys.S was missed.  This was not noticed because
in most circumstances it simply resulted in using the slow path because
the siglock was apparently not available (under old spinlock rules).

Problems occur when the ticket spinlock has value 0x0 (when first
initialised, or when it wraps around). At this point the fsys.S
code acquires the lock (changing the 0x0 to 0x1. If another process
attempts to get the lock at this point, it will change the value from
0x1 to 0x2 (using new ticket lock rules). Then the fsys.S code will
free the lock using old spinlock rules by writing 0x0 to it. From
here a variety of bad things can happen.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/fsys.S | 46 ++++++++++++++++++++++++++++++++++-------
 1 file changed, 39 insertions(+), 7 deletions(-)

diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 3567d54f8cee..471a1e783aca 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -424,14 +424,26 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 	andcm r14=r14,r17			// filter out SIGKILL & SIGSTOP
 
 #ifdef CONFIG_SMP
-	mov r17=1
-	;;
-	cmpxchg4.acq r18=[r31],r17,ar.ccv	// try to acquire the lock
+	// __ticket_spin_trylock(r31)
+	ld4 r17=[r31]
 	mov r8=EINVAL			// default to EINVAL
 	;;
+	extr r9=r17,17,15
+	;;
+	xor r18=r17,r9
+	adds r19=1,r17
+	;;
+	extr.u r18=r18,0,15
+	;;
+	cmp.eq p0,p7=0,r18
+(p7)	br.cond.spnt.many .lock_contention
+	mov.m ar.ccv=r17
+	;;
+	cmpxchg4.acq r9=[r31],r19,ar.ccv
+	;;
+	cmp4.eq p0,p7=r9,r17
+(p7)	br.cond.spnt.many .lock_contention
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
-	cmp4.ne p6,p0=r18,r0
-(p6)	br.cond.spnt.many .lock_contention
 	;;
 #else
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
@@ -490,7 +502,17 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 (p6)	br.cond.spnt.few 1b			// yes -> retry
 
 #ifdef CONFIG_SMP
-	st4.rel [r31]=r0			// release the lock
+	// __ticket_spin_unlock(r31)
+	adds r31=2,r31
+	;;
+	ld2.bias r2=[r31]
+	mov r3=65534
+	;;
+	adds r2=2,r2
+	;;
+	and r3=r3,r2
+	;;
+	st2.rel [r31]=r3
 #endif
 	SSM_PSR_I(p0, p9, r31)
 	;;
@@ -512,7 +534,17 @@ EX(.fail_efault, (p15) st8 [r34]=r3)
 
 .sig_pending:
 #ifdef CONFIG_SMP
-	st4.rel [r31]=r0			// release the lock
+	// __ticket_spin_unlock(r31)
+	adds r31=2,r31
+	;;
+	ld2.bias r2=[r31]
+	mov r3=65534
+	;;
+	adds r2=2,r2
+	;;
+	and r3=r3,r2
+	;;
+	st2.rel [r31]=r3
 #endif
 	SSM_PSR_I(p0, p9, r17)
 	;;

From f3c65b2870f2481f3646bc410a58a12989ecc704 Mon Sep 17 00:00:00 2001
From: David Vrabel <david.vrabel@csr.com>
Date: Thu, 9 Sep 2010 16:37:24 -0700
Subject: [PATCH 214/728] mmc: avoid getting CID on SDIO-only cards

The introduction of support for SD combo cards breaks the initialization
of all CSR SDIO chips.  The GO_IDLE (CMD0) in mmc_sd_get_cid() causes CSR
chips to be reset (this is non-standard behavior).

When initializing an SDIO card check for a combo card by using the memory
present bit in the R4 response to IO_SEND_OP_COND (CMD5).  This avoids the
call to mmc_sd_get_cid() on an SDIO-only card.

Signed-off-by: David Vrabel <david.vrabel@csr.com>
Acked-by: Michal Mirolaw <mirq-linux@rere.qmqm.pl>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/core/sdio.c  | 5 ++---
 include/linux/mmc/sdio.h | 2 ++
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index bd2755e8d9a3..f332c52968b7 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -362,9 +362,8 @@ static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
 		goto err;
 	}
 
-	err = mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid);
-
-	if (!err) {
+	if (ocr & R4_MEMORY_PRESENT
+	    && mmc_sd_get_cid(host, host->ocr & ocr, card->raw_cid) == 0) {
 		card->type = MMC_TYPE_SD_COMBO;
 
 		if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index 329a8faa6e37..245cdacee544 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -38,6 +38,8 @@
  *      [8:0] Byte/block count
  */
 
+#define R4_MEMORY_PRESENT (1 << 27)
+
 /*
   SDIO status in R5
   Type

From e0bf1024b36be90da241af3c2767311e055b612c Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Thu, 9 Sep 2010 16:37:26 -0700
Subject: [PATCH 215/728] kfifo: add parenthesis for macro parameter reference

Some macro parameter references inside typeof() operator are not enclosed
with parenthesis.  It should be safer to add them.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/kfifo.h | 58 +++++++++++++++++++++----------------------
 1 file changed, 29 insertions(+), 29 deletions(-)

diff --git a/include/linux/kfifo.h b/include/linux/kfifo.h
index 4aa95f203f3e..62dbee554f60 100644
--- a/include/linux/kfifo.h
+++ b/include/linux/kfifo.h
@@ -214,7 +214,7 @@ __kfifo_must_check_helper(unsigned int val)
  */
 #define kfifo_reset(fifo) \
 (void)({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	__tmp->kfifo.in = __tmp->kfifo.out = 0; \
 })
 
@@ -228,7 +228,7 @@ __kfifo_must_check_helper(unsigned int val)
  */
 #define kfifo_reset_out(fifo)	\
 (void)({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	__tmp->kfifo.out = __tmp->kfifo.in; \
 })
 
@@ -238,7 +238,7 @@ __kfifo_must_check_helper(unsigned int val)
  */
 #define kfifo_len(fifo) \
 ({ \
-	typeof(fifo + 1) __tmpl = (fifo); \
+	typeof((fifo) + 1) __tmpl = (fifo); \
 	__tmpl->kfifo.in - __tmpl->kfifo.out; \
 })
 
@@ -248,7 +248,7 @@ __kfifo_must_check_helper(unsigned int val)
  */
 #define	kfifo_is_empty(fifo) \
 ({ \
-	typeof(fifo + 1) __tmpq = (fifo); \
+	typeof((fifo) + 1) __tmpq = (fifo); \
 	__tmpq->kfifo.in == __tmpq->kfifo.out; \
 })
 
@@ -258,7 +258,7 @@ __kfifo_must_check_helper(unsigned int val)
  */
 #define	kfifo_is_full(fifo) \
 ({ \
-	typeof(fifo + 1) __tmpq = (fifo); \
+	typeof((fifo) + 1) __tmpq = (fifo); \
 	kfifo_len(__tmpq) > __tmpq->kfifo.mask; \
 })
 
@@ -269,7 +269,7 @@ __kfifo_must_check_helper(unsigned int val)
 #define	kfifo_avail(fifo) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmpq = (fifo); \
+	typeof((fifo) + 1) __tmpq = (fifo); \
 	const size_t __recsize = sizeof(*__tmpq->rectype); \
 	unsigned int __avail = kfifo_size(__tmpq) - kfifo_len(__tmpq); \
 	(__recsize) ? ((__avail <= __recsize) ? 0 : \
@@ -284,7 +284,7 @@ __kfifo_must_check_helper( \
  */
 #define	kfifo_skip(fifo) \
 (void)({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
 	if (__recsize) \
@@ -302,7 +302,7 @@ __kfifo_must_check_helper( \
 #define kfifo_peek_len(fifo) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
 	(!__recsize) ? kfifo_len(__tmp) * sizeof(*__tmp->type) : \
@@ -325,7 +325,7 @@ __kfifo_must_check_helper( \
 #define kfifo_alloc(fifo, size, gfp_mask) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
 	__is_kfifo_ptr(__tmp) ? \
 	__kfifo_alloc(__kfifo, size, sizeof(*__tmp->type), gfp_mask) : \
@@ -339,7 +339,7 @@ __kfifo_must_check_helper( \
  */
 #define kfifo_free(fifo) \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
 	if (__is_kfifo_ptr(__tmp)) \
 		__kfifo_free(__kfifo); \
@@ -358,7 +358,7 @@ __kfifo_must_check_helper( \
  */
 #define kfifo_init(fifo, buffer, size) \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
 	__is_kfifo_ptr(__tmp) ? \
 	__kfifo_init(__kfifo, buffer, size, sizeof(*__tmp->type)) : \
@@ -379,8 +379,8 @@ __kfifo_must_check_helper( \
  */
 #define	kfifo_put(fifo, val) \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
-	typeof(val + 1) __val = (val); \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
 	unsigned int __ret; \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -421,8 +421,8 @@ __kfifo_must_check_helper( \
 #define	kfifo_get(fifo, val) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
-	typeof(val + 1) __val = (val); \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
 	unsigned int __ret; \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -462,8 +462,8 @@ __kfifo_must_check_helper( \
 #define	kfifo_peek(fifo, val) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
-	typeof(val + 1) __val = (val); \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((val) + 1) __val = (val); \
 	unsigned int __ret; \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -501,8 +501,8 @@ __kfifo_must_check_helper( \
  */
 #define	kfifo_in(fifo, buf, n) \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
-	typeof(buf + 1) __buf = (buf); \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
 	unsigned long __n = (n); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -554,8 +554,8 @@ __kfifo_must_check_helper( \
 #define	kfifo_out(fifo, buf, n) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
-	typeof(buf + 1) __buf = (buf); \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
 	unsigned long __n = (n); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -611,7 +611,7 @@ __kfifo_must_check_helper( \
 #define	kfifo_from_user(fifo, from, len, copied) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	const void __user *__from = (from); \
 	unsigned int __len = (len); \
 	unsigned int *__copied = (copied); \
@@ -639,7 +639,7 @@ __kfifo_must_check_helper( \
 #define	kfifo_to_user(fifo, to, len, copied) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	void __user *__to = (to); \
 	unsigned int __len = (len); \
 	unsigned int *__copied = (copied); \
@@ -666,7 +666,7 @@ __kfifo_must_check_helper( \
  */
 #define	kfifo_dma_in_prepare(fifo, sgl, nents, len) \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	struct scatterlist *__sgl = (sgl); \
 	int __nents = (nents); \
 	unsigned int __len = (len); \
@@ -690,7 +690,7 @@ __kfifo_must_check_helper( \
  */
 #define kfifo_dma_in_finish(fifo, len) \
 (void)({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	unsigned int __len = (len); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -717,7 +717,7 @@ __kfifo_must_check_helper( \
  */
 #define	kfifo_dma_out_prepare(fifo, sgl, nents, len) \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo);  \
 	struct scatterlist *__sgl = (sgl); \
 	int __nents = (nents); \
 	unsigned int __len = (len); \
@@ -741,7 +741,7 @@ __kfifo_must_check_helper( \
  */
 #define kfifo_dma_out_finish(fifo, len) \
 (void)({ \
-	typeof(fifo + 1) __tmp = (fifo); \
+	typeof((fifo) + 1) __tmp = (fifo); \
 	unsigned int __len = (len); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \
@@ -766,8 +766,8 @@ __kfifo_must_check_helper( \
 #define	kfifo_out_peek(fifo, buf, n) \
 __kfifo_must_check_helper( \
 ({ \
-	typeof(fifo + 1) __tmp = (fifo); \
-	typeof(buf + 1) __buf = (buf); \
+	typeof((fifo) + 1) __tmp = (fifo); \
+	typeof((buf) + 1) __buf = (buf); \
 	unsigned long __n = (n); \
 	const size_t __recsize = sizeof(*__tmp->rectype); \
 	struct __kfifo *__kfifo = &__tmp->kfifo; \

From 110b7e9698601b28f313c2c560d51a8b1c742002 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 9 Sep 2010 16:37:27 -0700
Subject: [PATCH 216/728] rtc-bfin: fix inverted logic in suspend path

The int_clear helper takes a bitmask of interrupts to keep, not to
disable.  When suspending without wakeup enabled, we want to disable
all interrupts, so use 0 (keep none) instead of -1 (keep all).

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-bfin.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 72b2bcc2c224..65facfbe70fb 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -426,7 +426,7 @@ static int bfin_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 		enable_irq_wake(IRQ_RTC);
 		bfin_rtc_sync_pending(&pdev->dev);
 	} else
-		bfin_rtc_int_clear(-1);
+		bfin_rtc_int_clear(0);
 
 	return 0;
 }

From b6de860651d5a9e56ba4f4e3edc1aa52ac2ac849 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Thu, 9 Sep 2010 16:37:29 -0700
Subject: [PATCH 217/728] rtc-bfin: fix state restoration when resuming

Much (but not all) of the RTC state is kept in the RTC peripheral which
has its own power domain.  Periodically (1 HZ), that state is synced from
one power domain to the other (peripheral->core).  When we are resuming,
we need to wait for the sync to occur so that we don't get a mismatch of
reading undefined state in the rest of the driver.

Further, once the externally maintained bits have been synced back into
the core, we then need to restore the bits maintained in the core.  In our
particular case, that is just the write completion interrupt bit.

If we don't do any of this, working with the RTC causes ~5 second delays
from time to time after waking up due to the write completion interrupt
never firing.

Reported-by: Michael Dean <mdean@aeronix.com>
Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-bfin.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 65facfbe70fb..d4fb82d85e9b 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -435,8 +435,17 @@ static int bfin_rtc_resume(struct platform_device *pdev)
 {
 	if (device_may_wakeup(&pdev->dev))
 		disable_irq_wake(IRQ_RTC);
-	else
-		bfin_write_RTC_ISTAT(-1);
+
+	/*
+	 * Since only some of the RTC bits are maintained externally in the
+	 * Vbat domain, we need to wait for the RTC MMRs to be synced into
+	 * the core after waking up.  This happens every RTC 1HZ.  Once that
+	 * has happened, we can go ahead and re-enable the important write
+	 * complete interrupt event.
+	 */
+	while (!(bfin_read_RTC_ISTAT() & RTC_ISTAT_SEC))
+		continue;
+	bfin_rtc_int_set(RTC_ISTAT_WRITE_COMPLETE);
 
 	return 0;
 }

From 841a23ae1e7a8f8758ac915ceaf2e11a1cc235c5 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jslaby@suse.cz>
Date: Thu, 9 Sep 2010 16:37:30 -0700
Subject: [PATCH 218/728] MAINTAINERS: remove drivers/char/hpet.c

bob.picco@hp.com doesn't work any more and Bob says that he's unlikely to
work on hpet.c in the future.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Bob Picco <bpicco@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7e189b57c8b5..05e5537b7690 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2787,11 +2787,6 @@ S:	Maintained
 F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
 
-HPET:	ACPI
-M:	Bob Picco <bob.picco@hp.com>
-S:	Maintained
-F:	drivers/char/hpet.c
-
 HPFS FILESYSTEM
 M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi

From 4e70598c3b56e6fec551454c495d4d4025834749 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 9 Sep 2010 16:37:31 -0700
Subject: [PATCH 219/728] hp_accel: add quirks for HP ProBook 532x and HP Mini
 5102

Added missing axis-mapping for HP ProBook 532x and HP Mini 5102.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/hwmon/hp_accel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 7580f55e67e3..36e957532230 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -221,6 +221,8 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
 	AXIS_DMI_MATCH("HPB442x", "HP ProBook 442", xy_rotated_left),
 	AXIS_DMI_MATCH("HPB452x", "HP ProBook 452", y_inverted),
 	AXIS_DMI_MATCH("HPB522x", "HP ProBook 522", xy_swap),
+	AXIS_DMI_MATCH("HPB532x", "HP ProBook 532", y_inverted),
+	AXIS_DMI_MATCH("Mini5102", "HP Mini 5102", xy_rotated_left_usd),
 	{ NULL, }
 /* Laptop models without axis info (yet):
  * "NC6910" "HP Compaq 6910"

From 7a801ac6f5067539ceb5fad0fe90ec49fc156e47 Mon Sep 17 00:00:00 2001
From: Jeff Moyer <jmoyer@redhat.com>
Date: Thu, 9 Sep 2010 16:37:33 -0700
Subject: [PATCH 220/728] O_DIRECT: fix the splitting up of contiguous I/O

commit c2c6ca4 (direct-io: do not merge logically non-contiguous requests)
introduced a bug whereby all O_DIRECT I/Os were submitted a page at a time
to the block layer.  The problem is that the code expected
dio->block_in_file to correspond to the current page in the dio.  In fact,
it corresponds to the previous page submitted via submit_page_section.
This was purely an oversight, as the dio->cur_page_fs_offset field was
introduced for just this purpose.  This patch simply uses the correct
variable when calculating whether there is a mismatch between contiguous
logical blocks and contiguous physical blocks (as described in the
comments).

I also switched the if conditional following this check to an else if, to
ensure that we never call dio_bio_submit twice for the same dio (in
theory, this should not happen, anyway).

I've tested this by running blktrace and verifying that a 64KB I/O was
submitted as a single I/O.  I also ran the patched kernel through
xfstests' aio tests using xfs, ext4 (with 1k and 4k block sizes) and btrfs
and verified that there were no regressions as compared to an unpatched
kernel.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Josef Bacik <jbacik@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: <stable@kernel.org>		[2.6.35.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/direct-io.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/direct-io.c b/fs/direct-io.c
index 51f270b479b6..48d74c7391d1 100644
--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -634,7 +634,7 @@ static int dio_send_cur_page(struct dio *dio)
 	int ret = 0;
 
 	if (dio->bio) {
-		loff_t cur_offset = dio->block_in_file << dio->blkbits;
+		loff_t cur_offset = dio->cur_page_fs_offset;
 		loff_t bio_next_offset = dio->logical_offset_in_bio +
 			dio->bio->bi_size;
 
@@ -659,7 +659,7 @@ static int dio_send_cur_page(struct dio *dio)
 		 * Submit now if the underlying fs is about to perform a
 		 * metadata read
 		 */
-		if (dio->boundary)
+		else if (dio->boundary)
 			dio_bio_submit(dio);
 	}
 

From 2f327dad14aa8bc939a4f0a2d3fdcf64a2d8c09e Mon Sep 17 00:00:00 2001
From: Simon Horman <horms@verge.net.au>
Date: Thu, 9 Sep 2010 16:37:33 -0700
Subject: [PATCH 221/728] MAINTAINERS: kexec-tools has moved

Kexec tools has been moved to http://kernel.org/pub/linux/utils/kernel/kexec/
as user-space code shouldn't be in /pub/linux/kernel

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 05e5537b7690..a3da87f82a75 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3399,7 +3399,7 @@ F:	drivers/s390/kvm/
 
 KEXEC
 M:	Eric Biederman <ebiederm@xmission.com>
-W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
+W:	http://kernel.org/pub/linux/utils/kernel/kexec/
 L:	kexec@lists.infradead.org
 S:	Maintained
 F:	include/linux/kexec.h

From 85a0fdfd0f967507f3903e8419bc7e408f5a59de Mon Sep 17 00:00:00 2001
From: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Date: Thu, 9 Sep 2010 16:37:35 -0700
Subject: [PATCH 222/728] gcov: fix null-pointer dereference for certain module
 types

The gcov-kernel infrastructure expects that each object file is loaded
only once.  This may not be true, e.g.  when loading multiple kernel
modules which are linked to the same object file.  As a result, loading
such kernel modules will result in incorrect gcov results while unloading
will cause a null-pointer dereference.

This patch fixes these problems by changing the gcov-kernel infrastructure
so that multiple profiling data sets can be associated with one debugfs
entry.  It applies to 2.6.36-rc1.

Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Reported-by: Werner Spies <werner.spies@thalesgroup.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/gcov/fs.c | 250 ++++++++++++++++++++++++++++++++++-------------
 1 file changed, 183 insertions(+), 67 deletions(-)

diff --git a/kernel/gcov/fs.c b/kernel/gcov/fs.c
index ef3c3f88a7a3..f83972b16564 100644
--- a/kernel/gcov/fs.c
+++ b/kernel/gcov/fs.c
@@ -33,10 +33,11 @@
  * @children: child nodes
  * @all: list head for list of all nodes
  * @parent: parent node
- * @info: associated profiling data structure if not a directory
- * @ghost: when an object file containing profiling data is unloaded we keep a
- *         copy of the profiling data here to allow collecting coverage data
- *         for cleanup code. Such a node is called a "ghost".
+ * @loaded_info: array of pointers to profiling data sets for loaded object
+ *   files.
+ * @num_loaded: number of profiling data sets for loaded object files.
+ * @unloaded_info: accumulated copy of profiling data sets for unloaded
+ *   object files. Used only when gcov_persist=1.
  * @dentry: main debugfs entry, either a directory or data file
  * @links: associated symbolic links
  * @name: data file basename
@@ -51,10 +52,11 @@ struct gcov_node {
 	struct list_head children;
 	struct list_head all;
 	struct gcov_node *parent;
-	struct gcov_info *info;
-	struct gcov_info *ghost;
+	struct gcov_info **loaded_info;
+	struct gcov_info *unloaded_info;
 	struct dentry *dentry;
 	struct dentry **links;
+	int num_loaded;
 	char name[0];
 };
 
@@ -136,16 +138,37 @@ static const struct seq_operations gcov_seq_ops = {
 };
 
 /*
- * Return the profiling data set for a given node. This can either be the
- * original profiling data structure or a duplicate (also called "ghost")
- * in case the associated object file has been unloaded.
+ * Return a profiling data set associated with the given node. This is
+ * either a data set for a loaded object file or a data set copy in case
+ * all associated object files have been unloaded.
  */
 static struct gcov_info *get_node_info(struct gcov_node *node)
 {
-	if (node->info)
-		return node->info;
+	if (node->num_loaded > 0)
+		return node->loaded_info[0];
 
-	return node->ghost;
+	return node->unloaded_info;
+}
+
+/*
+ * Return a newly allocated profiling data set which contains the sum of
+ * all profiling data associated with the given node.
+ */
+static struct gcov_info *get_accumulated_info(struct gcov_node *node)
+{
+	struct gcov_info *info;
+	int i = 0;
+
+	if (node->unloaded_info)
+		info = gcov_info_dup(node->unloaded_info);
+	else
+		info = gcov_info_dup(node->loaded_info[i++]);
+	if (!info)
+		return NULL;
+	for (; i < node->num_loaded; i++)
+		gcov_info_add(info, node->loaded_info[i]);
+
+	return info;
 }
 
 /*
@@ -163,9 +186,10 @@ static int gcov_seq_open(struct inode *inode, struct file *file)
 	mutex_lock(&node_lock);
 	/*
 	 * Read from a profiling data copy to minimize reference tracking
-	 * complexity and concurrent access.
+	 * complexity and concurrent access and to keep accumulating multiple
+	 * profiling data sets associated with one node simple.
 	 */
-	info = gcov_info_dup(get_node_info(node));
+	info = get_accumulated_info(node);
 	if (!info)
 		goto out_unlock;
 	iter = gcov_iter_new(info);
@@ -225,12 +249,25 @@ static struct gcov_node *get_node_by_name(const char *name)
 	return NULL;
 }
 
+/*
+ * Reset all profiling data associated with the specified node.
+ */
+static void reset_node(struct gcov_node *node)
+{
+	int i;
+
+	if (node->unloaded_info)
+		gcov_info_reset(node->unloaded_info);
+	for (i = 0; i < node->num_loaded; i++)
+		gcov_info_reset(node->loaded_info[i]);
+}
+
 static void remove_node(struct gcov_node *node);
 
 /*
  * write() implementation for gcov data files. Reset profiling data for the
- * associated file. If the object file has been unloaded (i.e. this is
- * a "ghost" node), remove the debug fs node as well.
+ * corresponding file. If all associated object files have been unloaded,
+ * remove the debug fs node as well.
  */
 static ssize_t gcov_seq_write(struct file *file, const char __user *addr,
 			      size_t len, loff_t *pos)
@@ -245,10 +282,10 @@ static ssize_t gcov_seq_write(struct file *file, const char __user *addr,
 	node = get_node_by_name(info->filename);
 	if (node) {
 		/* Reset counts or remove node for unloaded modules. */
-		if (node->ghost)
+		if (node->num_loaded == 0)
 			remove_node(node);
 		else
-			gcov_info_reset(node->info);
+			reset_node(node);
 	}
 	/* Reset counts for open file. */
 	gcov_info_reset(info);
@@ -378,7 +415,10 @@ static void init_node(struct gcov_node *node, struct gcov_info *info,
 	INIT_LIST_HEAD(&node->list);
 	INIT_LIST_HEAD(&node->children);
 	INIT_LIST_HEAD(&node->all);
-	node->info = info;
+	if (node->loaded_info) {
+		node->loaded_info[0] = info;
+		node->num_loaded = 1;
+	}
 	node->parent = parent;
 	if (name)
 		strcpy(node->name, name);
@@ -394,9 +434,13 @@ static struct gcov_node *new_node(struct gcov_node *parent,
 	struct gcov_node *node;
 
 	node = kzalloc(sizeof(struct gcov_node) + strlen(name) + 1, GFP_KERNEL);
-	if (!node) {
-		pr_warning("out of memory\n");
-		return NULL;
+	if (!node)
+		goto err_nomem;
+	if (info) {
+		node->loaded_info = kcalloc(1, sizeof(struct gcov_info *),
+					   GFP_KERNEL);
+		if (!node->loaded_info)
+			goto err_nomem;
 	}
 	init_node(node, info, name, parent);
 	/* Differentiate between gcov data file nodes and directory nodes. */
@@ -416,6 +460,11 @@ static struct gcov_node *new_node(struct gcov_node *parent,
 	list_add(&node->all, &all_head);
 
 	return node;
+
+err_nomem:
+	kfree(node);
+	pr_warning("out of memory\n");
+	return NULL;
 }
 
 /* Remove symbolic links associated with node. */
@@ -441,8 +490,9 @@ static void release_node(struct gcov_node *node)
 	list_del(&node->all);
 	debugfs_remove(node->dentry);
 	remove_links(node);
-	if (node->ghost)
-		gcov_info_free(node->ghost);
+	kfree(node->loaded_info);
+	if (node->unloaded_info)
+		gcov_info_free(node->unloaded_info);
 	kfree(node);
 }
 
@@ -477,7 +527,7 @@ static struct gcov_node *get_child_by_name(struct gcov_node *parent,
 
 /*
  * write() implementation for reset file. Reset all profiling data to zero
- * and remove ghost nodes.
+ * and remove nodes for which all associated object files are unloaded.
  */
 static ssize_t reset_write(struct file *file, const char __user *addr,
 			   size_t len, loff_t *pos)
@@ -487,8 +537,8 @@ static ssize_t reset_write(struct file *file, const char __user *addr,
 	mutex_lock(&node_lock);
 restart:
 	list_for_each_entry(node, &all_head, all) {
-		if (node->info)
-			gcov_info_reset(node->info);
+		if (node->num_loaded > 0)
+			reset_node(node);
 		else if (list_empty(&node->children)) {
 			remove_node(node);
 			/* Several nodes may have gone - restart loop. */
@@ -564,37 +614,115 @@ err_remove:
 }
 
 /*
- * The profiling data set associated with this node is being unloaded. Store a
- * copy of the profiling data and turn this node into a "ghost".
+ * Associate a profiling data set with an existing node. Needs to be called
+ * with node_lock held.
  */
-static int ghost_node(struct gcov_node *node)
+static void add_info(struct gcov_node *node, struct gcov_info *info)
 {
-	node->ghost = gcov_info_dup(node->info);
-	if (!node->ghost) {
-		pr_warning("could not save data for '%s' (out of memory)\n",
-			   node->info->filename);
-		return -ENOMEM;
-	}
-	node->info = NULL;
+	struct gcov_info **loaded_info;
+	int num = node->num_loaded;
 
-	return 0;
+	/*
+	 * Prepare new array. This is done first to simplify cleanup in
+	 * case the new data set is incompatible, the node only contains
+	 * unloaded data sets and there's not enough memory for the array.
+	 */
+	loaded_info = kcalloc(num + 1, sizeof(struct gcov_info *), GFP_KERNEL);
+	if (!loaded_info) {
+		pr_warning("could not add '%s' (out of memory)\n",
+			   info->filename);
+		return;
+	}
+	memcpy(loaded_info, node->loaded_info,
+	       num * sizeof(struct gcov_info *));
+	loaded_info[num] = info;
+	/* Check if the new data set is compatible. */
+	if (num == 0) {
+		/*
+		 * A module was unloaded, modified and reloaded. The new
+		 * data set replaces the copy of the last one.
+		 */
+		if (!gcov_info_is_compatible(node->unloaded_info, info)) {
+			pr_warning("discarding saved data for %s "
+				   "(incompatible version)\n", info->filename);
+			gcov_info_free(node->unloaded_info);
+			node->unloaded_info = NULL;
+		}
+	} else {
+		/*
+		 * Two different versions of the same object file are loaded.
+		 * The initial one takes precedence.
+		 */
+		if (!gcov_info_is_compatible(node->loaded_info[0], info)) {
+			pr_warning("could not add '%s' (incompatible "
+				   "version)\n", info->filename);
+			kfree(loaded_info);
+			return;
+		}
+	}
+	/* Overwrite previous array. */
+	kfree(node->loaded_info);
+	node->loaded_info = loaded_info;
+	node->num_loaded = num + 1;
 }
 
 /*
- * Profiling data for this node has been loaded again. Add profiling data
- * from previous instantiation and turn this node into a regular node.
+ * Return the index of a profiling data set associated with a node.
  */
-static void revive_node(struct gcov_node *node, struct gcov_info *info)
+static int get_info_index(struct gcov_node *node, struct gcov_info *info)
 {
-	if (gcov_info_is_compatible(node->ghost, info))
-		gcov_info_add(info, node->ghost);
-	else {
-		pr_warning("discarding saved data for '%s' (version changed)\n",
-			   info->filename);
+	int i;
+
+	for (i = 0; i < node->num_loaded; i++) {
+		if (node->loaded_info[i] == info)
+			return i;
 	}
-	gcov_info_free(node->ghost);
-	node->ghost = NULL;
-	node->info = info;
+	return -ENOENT;
+}
+
+/*
+ * Save the data of a profiling data set which is being unloaded.
+ */
+static void save_info(struct gcov_node *node, struct gcov_info *info)
+{
+	if (node->unloaded_info)
+		gcov_info_add(node->unloaded_info, info);
+	else {
+		node->unloaded_info = gcov_info_dup(info);
+		if (!node->unloaded_info) {
+			pr_warning("could not save data for '%s' "
+				   "(out of memory)\n", info->filename);
+		}
+	}
+}
+
+/*
+ * Disassociate a profiling data set from a node. Needs to be called with
+ * node_lock held.
+ */
+static void remove_info(struct gcov_node *node, struct gcov_info *info)
+{
+	int i;
+
+	i = get_info_index(node, info);
+	if (i < 0) {
+		pr_warning("could not remove '%s' (not found)\n",
+			   info->filename);
+		return;
+	}
+	if (gcov_persist)
+		save_info(node, info);
+	/* Shrink array. */
+	node->loaded_info[i] = node->loaded_info[node->num_loaded - 1];
+	node->num_loaded--;
+	if (node->num_loaded > 0)
+		return;
+	/* Last loaded data set was removed. */
+	kfree(node->loaded_info);
+	node->loaded_info = NULL;
+	node->num_loaded = 0;
+	if (!node->unloaded_info)
+		remove_node(node);
 }
 
 /*
@@ -609,30 +737,18 @@ void gcov_event(enum gcov_action action, struct gcov_info *info)
 	node = get_node_by_name(info->filename);
 	switch (action) {
 	case GCOV_ADD:
-		/* Add new node or revive ghost. */
-		if (!node) {
+		if (node)
+			add_info(node, info);
+		else
 			add_node(info);
-			break;
-		}
-		if (gcov_persist)
-			revive_node(node, info);
-		else {
-			pr_warning("could not add '%s' (already exists)\n",
-				   info->filename);
-		}
 		break;
 	case GCOV_REMOVE:
-		/* Remove node or turn into ghost. */
-		if (!node) {
+		if (node)
+			remove_info(node, info);
+		else {
 			pr_warning("could not remove '%s' (not found)\n",
 				   info->filename);
-			break;
 		}
-		if (gcov_persist) {
-			if (!ghost_node(node))
-				break;
-		}
-		remove_node(node);
 		break;
 	}
 	mutex_unlock(&node_lock);

From ed430fec756ad65f7cfba24f8ad17c3d5a403290 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 9 Sep 2010 16:37:36 -0700
Subject: [PATCH 223/728] proc: export uncached bit properly in
 /proc/kpageflags

Fix the left-over old ifdef for PG_uncached in /proc/kpageflags.  Now it's
used by x86, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/page.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/proc/page.c b/fs/proc/page.c
index 180cf5a0bd67..3b8b45660331 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -146,7 +146,7 @@ u64 stable_page_flags(struct page *page)
 	u |= kpf_copy_bit(k, KPF_HWPOISON,	PG_hwpoison);
 #endif
 
-#ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
+#ifdef CONFIG_ARCH_USES_PG_UNCACHED
 	u |= kpf_copy_bit(k, KPF_UNCACHED,	PG_uncached);
 #endif
 

From 31583bb0cf6cc40f2a468a4d2f3b9cbefd24f891 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Thu, 9 Sep 2010 16:37:37 -0700
Subject: [PATCH 224/728] cgroups: fix API thinko

Add cgroup_attach_task_all()

The existing cgroup_attach_task_current_cg() API is called by a thread to
attach another thread to all of its cgroups; this is unsuitable for cases
where a privileged task wants to attach itself to the cgroups of a less
privileged one, since the call must be made from the context of the target
task.

This patch adds a more generic cgroup_attach_task_all() API that allows
both the source task and to-be-moved task to be specified.
cgroup_attach_task_current_cg() becomes a specialization of the more
generic new function.

[menage@google.com: rewrote changelog]
[akpm@linux-foundation.org: address reviewer comments]
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Ben Blum <bblum@google.com>
Cc: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/cgroup.h | 12 +++++++++++-
 kernel/cgroup.c        | 13 +++++++------
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index ed3e92e41c6e..0c991023ee47 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -578,7 +578,12 @@ struct task_struct *cgroup_iter_next(struct cgroup *cgrp,
 void cgroup_iter_end(struct cgroup *cgrp, struct cgroup_iter *it);
 int cgroup_scan_tasks(struct cgroup_scanner *scan);
 int cgroup_attach_task(struct cgroup *, struct task_struct *);
-int cgroup_attach_task_current_cg(struct task_struct *);
+int cgroup_attach_task_all(struct task_struct *from, struct task_struct *);
+
+static inline int cgroup_attach_task_current_cg(struct task_struct *tsk)
+{
+	return cgroup_attach_task_all(current, tsk);
+}
 
 /*
  * CSS ID is ID for cgroup_subsys_state structs under subsys. This only works
@@ -636,6 +641,11 @@ static inline int cgroupstats_build(struct cgroupstats *stats,
 }
 
 /* No cgroups - nothing to do */
+static inline int cgroup_attach_task_all(struct task_struct *from,
+					 struct task_struct *t)
+{
+	return 0;
+}
 static inline int cgroup_attach_task_current_cg(struct task_struct *t)
 {
 	return 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 192f88c5b0f9..c9483d8f6140 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1791,19 +1791,20 @@ out:
 }
 
 /**
- * cgroup_attach_task_current_cg - attach task 'tsk' to current task's cgroup
+ * cgroup_attach_task_all - attach task 'tsk' to all cgroups of task 'from'
+ * @from: attach to all cgroups of a given task
  * @tsk: the task to be attached
  */
-int cgroup_attach_task_current_cg(struct task_struct *tsk)
+int cgroup_attach_task_all(struct task_struct *from, struct task_struct *tsk)
 {
 	struct cgroupfs_root *root;
-	struct cgroup *cur_cg;
 	int retval = 0;
 
 	cgroup_lock();
 	for_each_active_root(root) {
-		cur_cg = task_cgroup_from_root(current, root);
-		retval = cgroup_attach_task(cur_cg, tsk);
+		struct cgroup *from_cg = task_cgroup_from_root(from, root);
+
+		retval = cgroup_attach_task(from_cg, tsk);
 		if (retval)
 			break;
 	}
@@ -1811,7 +1812,7 @@ int cgroup_attach_task_current_cg(struct task_struct *tsk)
 
 	return retval;
 }
-EXPORT_SYMBOL_GPL(cgroup_attach_task_current_cg);
+EXPORT_SYMBOL_GPL(cgroup_attach_task_all);
 
 /*
  * Attach task with pid 'pid' to cgroup 'cgrp'. Call with cgroup_mutex

From b78d6c5f51935ba89df8db33a57bacb547aa7325 Mon Sep 17 00:00:00 2001
From: Yusuke Goda <yusuke.goda.sx@renesas.com>
Date: Thu, 9 Sep 2010 16:37:39 -0700
Subject: [PATCH 225/728] tmio_mmc: don't clear unhandled pending interrupts

Previously, it was possible for ack_mmc_irqs() to clear pending interrupt
bits in the CTL_STATUS register, even though the interrupt handler had not
been called.  This was because of a race that existed when doing a
read-modify-write sequence on CTL_STATUS.  After the read step in this
sequence, if an interrupt occurred (causing one of the bits in CTL_STATUS
to be set) the write step would inadvertently clear it.

Observed with the TMIO_STAT_RXRDY bit together with CMD53 on AR6002 and
BCM4318 SDIO cards in polled mode.

This patch eliminates this race by only writing to CTL_STATUS and clearing
the interrupts that were passed as an argument to ack_mmc_irqs()."

[matt@console-pimps.org: rewrote changelog]
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>"
Tested-by: Arnd Hannemann <arnd@arndnet.de>"
Acked-by: Ian Molton <ian@mnementh.co.uk>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <linux-mmc@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/tmio_mmc.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 64f7d5dfc106..79446047ee78 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -82,10 +82,7 @@
 
 #define ack_mmc_irqs(host, i) \
 	do { \
-		u32 mask;\
-		mask  = sd_ctrl_read32((host), CTL_STATUS); \
-		mask &= ~((i) & TMIO_MASK_IRQ); \
-		sd_ctrl_write32((host), CTL_STATUS, mask); \
+		sd_ctrl_write32((host), CTL_STATUS, ~(i)); \
 	} while (0)
 
 

From 5600efb1bc2745d93ae0bc08130117a84f2b9d69 Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Thu, 9 Sep 2010 16:37:43 -0700
Subject: [PATCH 226/728] mmc: fix the use of kunmap_atomic() in tmio_mmc.h

kunmap_atomic() takes the cookie, returned by the kmap_atomic() as its
argument and not the page address, used as an argument to kmap_atomic().
This patch fixes the compile error:

In file included from drivers/mmc/host/tmio_mmc.c:37:
drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kunmap_atomic':
drivers/mmc/host/tmio_mmc.h:192: error: negative width in bit-field '<anonymous>'

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Tested-by: Magnus Damm <damm@opensource.se>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/tmio_mmc.c | 7 ++++---
 drivers/mmc/host/tmio_mmc.h | 8 +++-----
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index ee7d0a5a51c4..69d98e3bf6ab 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -164,6 +164,7 @@ tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command *cmd)
 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
 	struct mmc_data *data = host->data;
+	void *sg_virt;
 	unsigned short *buf;
 	unsigned int count;
 	unsigned long flags;
@@ -173,8 +174,8 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 		return;
 	}
 
-	buf = (unsigned short *)(tmio_mmc_kmap_atomic(host, &flags) +
-	      host->sg_off);
+	sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags);
+	buf = (unsigned short *)(sg_virt + host->sg_off);
 
 	count = host->sg_ptr->length - host->sg_off;
 	if (count > data->blksz)
@@ -191,7 +192,7 @@ static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 
 	host->sg_off += count;
 
-	tmio_mmc_kunmap_atomic(host, &flags);
+	tmio_mmc_kunmap_atomic(sg_virt, &flags);
 
 	if (host->sg_off == host->sg_ptr->length)
 		tmio_mmc_next_sg(host);
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index 79446047ee78..0fedc78e3ea5 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -174,19 +174,17 @@ static inline int tmio_mmc_next_sg(struct tmio_mmc_host *host)
 	return --host->sg_len;
 }
 
-static inline char *tmio_mmc_kmap_atomic(struct tmio_mmc_host *host,
+static inline char *tmio_mmc_kmap_atomic(struct scatterlist *sg,
 	unsigned long *flags)
 {
-	struct scatterlist *sg = host->sg_ptr;
-
 	local_irq_save(*flags);
 	return kmap_atomic(sg_page(sg), KM_BIO_SRC_IRQ) + sg->offset;
 }
 
-static inline void tmio_mmc_kunmap_atomic(struct tmio_mmc_host *host,
+static inline void tmio_mmc_kunmap_atomic(void *virt,
 	unsigned long *flags)
 {
-	kunmap_atomic(sg_page(host->sg_ptr), KM_BIO_SRC_IRQ);
+	kunmap_atomic(virt, KM_BIO_SRC_IRQ);
 	local_irq_restore(*flags);
 }
 

From 60c2c0d5658082468b569d039f4d0dc24f92c66b Mon Sep 17 00:00:00 2001
From: Jiri Pinkava <jiri.pinkava@vscht.cz>
Date: Tue, 25 May 2010 09:48:58 +0200
Subject: [PATCH 227/728] ARM: SAMSUNG: MMC: fix build error when both DMA and
 PIO mode selected

[cjb: fix line-wrapped patch]
Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz>
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/s3cmci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 2e16e0a90a5e..976330de379e 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -1600,7 +1600,7 @@ static int __devinit s3cmci_probe(struct platform_device *pdev)
 	host->pio_active 	= XFER_NONE;
 
 #ifdef CONFIG_MMC_S3C_PIODMA
-	host->dodma		= host->pdata->dma;
+	host->dodma		= host->pdata->use_dma;
 #endif
 
 	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);

From 16d9b130783c54c30cab80e24810ab1ab9596e11 Mon Sep 17 00:00:00 2001
From: Sergio Aguirre <saaguirre@ti.com>
Date: Thu, 9 Sep 2010 16:37:46 -0700
Subject: [PATCH 228/728] omap_hsmmc: remove unused local `state'

This fixes the following warning:

drivers/mmc/host/omap_hsmmc.c: In function 'omap_hsmmc_suspend':
drivers/mmc/host/omap_hsmmc.c:2275: warning: unused variable 'state'

Introduced by commit ID:

  commit 1a13f8fa76c880be41d6b1e6a2b44404bcbfdf9e
  Author: Matt Fleming <matt@console-pimps.org>
  Date:   Wed May 26 14:42:08 2010 -0700

      mmc: remove the "state" argument to mmc_suspend_host()

The unique usage of this var was removed there, and missed
removing the respective declaration aswell.

Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/omap_hsmmc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 4a8776f8afdd..fb6446a6fb4d 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2305,7 +2305,6 @@ static int omap_hsmmc_suspend(struct device *dev)
 	int ret = 0;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct omap_hsmmc_host *host = platform_get_drvdata(pdev);
-	pm_message_t state = PMSG_SUSPEND; /* unused by MMC core */
 
 	if (host && host->suspended)
 		return 0;

From 23ef309a6e070490da0a37b9b6383819f8170ea3 Mon Sep 17 00:00:00 2001
From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Thu, 9 Sep 2010 16:37:48 -0700
Subject: [PATCH 229/728] mmc: at91_mci: add missing linux/highmem.h include

Fix the following error:

at91_mci.c: In function 'at91_mci_sg_to_dma':
at91_mci.c:236: error: implicit declaration of function 'kmap_atomic'
at91_mci.c:236: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function)
at91_mci.c:236: error: (Each undeclared identifier is reported only once
at91_mci.c:236: error: for each function it appears in.)
at91_mci.c:236: warning: assignment makes pointer from integer without a cast
at91_mci.c:252: error: implicit declaration of function 'kunmap_atomic'
at91_mci.c: In function 'at91_mci_post_dma_read':
at91_mci.c:302: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function)
at91_mci.c:302: warning: assignment makes pointer from integer without a cast
at91_mci.c:317: error: implicit declaration of function 'flush_kernel_dcache_page'

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: Wolfgang Muees <wolfgang.mues@auerswald.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/at91_mci.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 5f3a599ead07..87226cd202a5 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -66,6 +66,7 @@
 #include <linux/clk.h>
 #include <linux/atmel_pdc.h>
 #include <linux/gfp.h>
+#include <linux/highmem.h>
 
 #include <linux/mmc/host.h>
 

From e7cb756fc3c7c32040283963572258381b342dff Mon Sep 17 00:00:00 2001
From: Ethan Du <ethan.too@gmail.com>
Date: Thu, 9 Sep 2010 16:37:49 -0700
Subject: [PATCH 230/728] omap hsmmc: fix a racing case between kmmcd and
 omap_hsmmc_suspend

If suspend called when kmmcd is doing host->ops->disable, as kmmcd already
increased host->en_dis_recurs to 1, the mmc_host_enable in suspend
function will return directly without increase the nesting_cnt, which will
cause the followed register access carried out to the disabled host.

mmc_suspend_host will enable host itself.  No need to enable host before
it.  Also works on kmmcd will get flushed in mmc_suspend_host, enable host
after it will be safe.  So make the mmc_host_enable after it.

[cjb: rebase against current Linus]
Signed-off-by: Ethan <ethan.too@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Acked-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/omap_hsmmc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index fb6446a6fb4d..4526d2791f29 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -2323,8 +2323,8 @@ static int omap_hsmmc_suspend(struct device *dev)
 			}
 		}
 		cancel_work_sync(&host->mmc_carddetect_work);
-		mmc_host_enable(host->mmc);
 		ret = mmc_suspend_host(host->mmc);
+		mmc_host_enable(host->mmc);
 		if (ret == 0) {
 			omap_hsmmc_disable_irq(host);
 			OMAP_HSMMC_WRITE(host->base, HCTL,

From 7c5367f205f7d53659fb19b9fdf65b7bc1a592c6 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Thu, 9 Sep 2010 16:37:50 -0700
Subject: [PATCH 231/728] drivers/mmc/host/imxmmc.c: adjust confusing if
 indentation

Move the second if (reg & ...) test into the branch indicated by its
indentation.  The test was previously always executed after the if
containing that branch, but it was always false unless the if branch was
taken.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Pavel Pisa <ppisa@pikron.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/imxmmc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index 9a68ff4353a2..5a950b16d9e6 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -148,11 +148,12 @@ static int imxmci_start_clock(struct imxmci_host *host)
 
 		while (delay--) {
 			reg = readw(host->base + MMC_REG_STATUS);
-			if (reg & STATUS_CARD_BUS_CLK_RUN)
+			if (reg & STATUS_CARD_BUS_CLK_RUN) {
 				/* Check twice before cut */
 				reg = readw(host->base + MMC_REG_STATUS);
 				if (reg & STATUS_CARD_BUS_CLK_RUN)
 					return 0;
+			}
 
 			if (test_bit(IMXMCI_PEND_STARTED_b, &host->pending_events))
 				return 0;

From 4969c1192d15afa3389e7ae3302096ff684ba655 Mon Sep 17 00:00:00 2001
From: Andrea Arcangeli <aarcange@redhat.com>
Date: Thu, 9 Sep 2010 16:37:52 -0700
Subject: [PATCH 232/728] mm: fix swapin race condition

The pte_same check is reliable only if the swap entry remains pinned (by
the page lock on swapcache).  We've also to ensure the swapcache isn't
removed before we take the lock as try_to_free_swap won't care about the
page pin.

One of the possible impacts of this patch is that a KSM-shared page can
point to the anon_vma of another process, which could exit before the page
is freed.

This can leave a page with a pointer to a recycled anon_vma object, or
worse, a pointer to something that is no longer an anon_vma.

[riel@redhat.com: changelog help]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ksm.h | 20 +++++++++-----------
 mm/ksm.c            |  3 ---
 mm/memory.c         | 39 ++++++++++++++++++++++++++++++++++-----
 3 files changed, 43 insertions(+), 19 deletions(-)

diff --git a/include/linux/ksm.h b/include/linux/ksm.h
index 74d691ee9121..3319a6967626 100644
--- a/include/linux/ksm.h
+++ b/include/linux/ksm.h
@@ -16,6 +16,9 @@
 struct stable_node;
 struct mem_cgroup;
 
+struct page *ksm_does_need_to_copy(struct page *page,
+			struct vm_area_struct *vma, unsigned long address);
+
 #ifdef CONFIG_KSM
 int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
 		unsigned long end, int advice, unsigned long *vm_flags);
@@ -70,19 +73,14 @@ static inline void set_page_stable_node(struct page *page,
  * We'd like to make this conditional on vma->vm_flags & VM_MERGEABLE,
  * but what if the vma was unmerged while the page was swapped out?
  */
-struct page *ksm_does_need_to_copy(struct page *page,
-			struct vm_area_struct *vma, unsigned long address);
-static inline struct page *ksm_might_need_to_copy(struct page *page,
+static inline int ksm_might_need_to_copy(struct page *page,
 			struct vm_area_struct *vma, unsigned long address)
 {
 	struct anon_vma *anon_vma = page_anon_vma(page);
 
-	if (!anon_vma ||
-	    (anon_vma->root == vma->anon_vma->root &&
-	     page->index == linear_page_index(vma, address)))
-		return page;
-
-	return ksm_does_need_to_copy(page, vma, address);
+	return anon_vma &&
+		(anon_vma->root != vma->anon_vma->root ||
+		 page->index != linear_page_index(vma, address));
 }
 
 int page_referenced_ksm(struct page *page,
@@ -115,10 +113,10 @@ static inline int ksm_madvise(struct vm_area_struct *vma, unsigned long start,
 	return 0;
 }
 
-static inline struct page *ksm_might_need_to_copy(struct page *page,
+static inline int ksm_might_need_to_copy(struct page *page,
 			struct vm_area_struct *vma, unsigned long address)
 {
-	return page;
+	return 0;
 }
 
 static inline int page_referenced_ksm(struct page *page,
diff --git a/mm/ksm.c b/mm/ksm.c
index e2ae00458320..b1873cf03ed9 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1504,8 +1504,6 @@ struct page *ksm_does_need_to_copy(struct page *page,
 {
 	struct page *new_page;
 
-	unlock_page(page);	/* any racers will COW it, not modify it */
-
 	new_page = alloc_page_vma(GFP_HIGHUSER_MOVABLE, vma, address);
 	if (new_page) {
 		copy_user_highpage(new_page, page, address, vma);
@@ -1521,7 +1519,6 @@ struct page *ksm_does_need_to_copy(struct page *page,
 			add_page_to_unevictable_list(new_page);
 	}
 
-	page_cache_release(page);
 	return new_page;
 }
 
diff --git a/mm/memory.c b/mm/memory.c
index 6b2ab1051851..71b161b73bb5 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2623,7 +2623,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 		unsigned int flags, pte_t orig_pte)
 {
 	spinlock_t *ptl;
-	struct page *page;
+	struct page *page, *swapcache = NULL;
 	swp_entry_t entry;
 	pte_t pte;
 	struct mem_cgroup *ptr = NULL;
@@ -2679,10 +2679,23 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	lock_page(page);
 	delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
 
-	page = ksm_might_need_to_copy(page, vma, address);
-	if (!page) {
-		ret = VM_FAULT_OOM;
-		goto out;
+	/*
+	 * Make sure try_to_free_swap didn't release the swapcache
+	 * from under us. The page pin isn't enough to prevent that.
+	 */
+	if (unlikely(!PageSwapCache(page)))
+		goto out_page;
+
+	if (ksm_might_need_to_copy(page, vma, address)) {
+		swapcache = page;
+		page = ksm_does_need_to_copy(page, vma, address);
+
+		if (unlikely(!page)) {
+			ret = VM_FAULT_OOM;
+			page = swapcache;
+			swapcache = NULL;
+			goto out_page;
+		}
 	}
 
 	if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) {
@@ -2735,6 +2748,18 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	if (vm_swap_full() || (vma->vm_flags & VM_LOCKED) || PageMlocked(page))
 		try_to_free_swap(page);
 	unlock_page(page);
+	if (swapcache) {
+		/*
+		 * Hold the lock to avoid the swap entry to be reused
+		 * until we take the PT lock for the pte_same() check
+		 * (to avoid false positives from pte_same). For
+		 * further safety release the lock after the swap_free
+		 * so that the swap count won't change under a
+		 * parallel locked swapcache.
+		 */
+		unlock_page(swapcache);
+		page_cache_release(swapcache);
+	}
 
 	if (flags & FAULT_FLAG_WRITE) {
 		ret |= do_wp_page(mm, vma, address, page_table, pmd, ptl, pte);
@@ -2756,6 +2781,10 @@ out_page:
 	unlock_page(page);
 out_release:
 	page_cache_release(page);
+	if (swapcache) {
+		unlock_page(swapcache);
+		page_cache_release(swapcache);
+	}
 	return ret;
 }
 

From 152e0659fc001029c70fa4373af1792b1ae0d01c Mon Sep 17 00:00:00 2001
From: Andrea Arcangeli <aarcange@redhat.com>
Date: Thu, 9 Sep 2010 16:37:53 -0700
Subject: [PATCH 233/728] mm: avoid warning when COMPACTION is selected

COMPACTION enables MIGRATION, but MIGRATION spawns a warning if numa or
memhotplug aren't selected.  However MIGRATION doesn't depend on them.  I
guess it's just trying to be strict doing a double check on who's enabling
it, but it doesn't know that compaction also enables MIGRATION.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/Kconfig b/mm/Kconfig
index f4e516e9c37c..f0fb9124e410 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -189,7 +189,7 @@ config COMPACTION
 config MIGRATION
 	bool "Page migration"
 	def_bool y
-	depends on NUMA || ARCH_ENABLE_MEMORY_HOTREMOVE
+	depends on NUMA || ARCH_ENABLE_MEMORY_HOTREMOVE || COMPACTION
 	help
 	  Allows the migration of the physical location of pages of processes
 	  while the virtual addresses are not changed. This is useful in

From ee3aebdd8f5f8eac41c25c80ceee3d728f920f3b Mon Sep 17 00:00:00 2001
From: Jan Sembera <jsembera@suse.cz>
Date: Thu, 9 Sep 2010 16:37:54 -0700
Subject: [PATCH 234/728] binfmt_misc: fix binfmt_misc priority

Commit 74641f584da ("alpha: binfmt_aout fix") (May 2009) introduced a
regression - binfmt_misc is now consulted after binfmt_elf, which will
unfortunately break ia32el.  ia32 ELF binaries on ia64 used to be matched
using binfmt_misc and executed using wrapper.  As 32bit binaries are now
matched by binfmt_elf before bindmt_misc kicks in, the wrapper is ignored.

The fix increases precedence of binfmt_misc to the original state.

Signed-off-by: Jan Sembera <jsembera@suse.cz>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net
Cc: <stable@kernel.org>		[2.6.everything.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_misc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index a7528b913936..fd0cc0bf9a40 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -724,7 +724,7 @@ static int __init init_misc_binfmt(void)
 {
 	int err = register_filesystem(&bm_fs_type);
 	if (!err) {
-		err = register_binfmt(&misc_format);
+		err = insert_binfmt(&misc_format);
 		if (err)
 			unregister_filesystem(&bm_fs_type);
 	}

From 408929bed7841686ce5fdd06366fb652cb653d6c Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 9 Sep 2010 16:37:56 -0700
Subject: [PATCH 235/728] rtc: m41t80: do not use rtc_valid_tm in
 m41t80_rtc_read_alarm

Commit b485fe5ea ("rtc/m41t80: use rtc_valid_tm() to check returned tm")
added rtc_valid_tm to m41t80_rtc_read_alarm() but it was wrong while the
t->time does not contain complete date/time.

This patch also fixes a warning:
warning: passing argument 1 of 'rtc_valid_tm' from incompatible pointer type

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-m41t80.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 66377f3e28b8..d60557cae8ef 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -364,7 +364,7 @@ static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	t->time.tm_isdst = -1;
 	t->enabled = !!(reg[M41T80_REG_ALARM_MON] & M41T80_ALMON_AFE);
 	t->pending = !!(reg[M41T80_REG_FLAGS] & M41T80_FLAGS_AF);
-	return rtc_valid_tm(t);
+	return 0;
 }
 
 static struct rtc_class_ops m41t80_rtc_ops = {

From 94131e174fedd9f3f9bb148cee4be12f2d46d68e Mon Sep 17 00:00:00 2001
From: "Ira W. Snyder" <iws@ovro.caltech.edu>
Date: Thu, 9 Sep 2010 16:37:58 -0700
Subject: [PATCH 236/728] arch/powerpc/include/asm/fsldma.h needs slab.h

The slab.h header is required to use the kmalloc() family of functions.
Due to recent kernel changes, this header must be directly included by
code that calls into the memory allocator.

Without this patch, any code which includes this header fails to build.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/include/asm/fsldma.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/include/asm/fsldma.h b/arch/powerpc/include/asm/fsldma.h
index a67aeed17d40..debc5ed96d6e 100644
--- a/arch/powerpc/include/asm/fsldma.h
+++ b/arch/powerpc/include/asm/fsldma.h
@@ -11,6 +11,7 @@
 #ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
 #define __ARCH_POWERPC_ASM_FSLDMA_H__
 
+#include <linux/slab.h>
 #include <linux/dmaengine.h>
 
 /*

From 1c24de60e50fb19b94d94225458da17c720f0729 Mon Sep 17 00:00:00 2001
From: Jerome Marchand <jmarchan@redhat.com>
Date: Thu, 9 Sep 2010 16:37:59 -0700
Subject: [PATCH 237/728] kernel/groups.c: fix integer overflow in
 groups_search

gid_t is a unsigned int.  If group_info contains a gid greater than
MAX_INT, groups_search() function may look on the wrong side of the search
tree.

This solves some unfair "permission denied" problems.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/groups.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/kernel/groups.c b/kernel/groups.c
index 53b1916c9492..253dc0f35cf4 100644
--- a/kernel/groups.c
+++ b/kernel/groups.c
@@ -143,10 +143,9 @@ int groups_search(const struct group_info *group_info, gid_t grp)
 	right = group_info->ngroups;
 	while (left < right) {
 		unsigned int mid = (left+right)/2;
-		int cmp = grp - GROUP_AT(group_info, mid);
-		if (cmp > 0)
+		if (grp > GROUP_AT(group_info, mid))
 			left = mid + 1;
-		else if (cmp < 0)
+		else if (grp < GROUP_AT(group_info, mid))
 			right = mid;
 		else
 			return 1;

From bc6930457460788e14b2c0808ed4632a1592bd61 Mon Sep 17 00:00:00 2001
From: Minchan Kim <minchan.kim@gmail.com>
Date: Thu, 9 Sep 2010 16:38:00 -0700
Subject: [PATCH 238/728] mm: compaction: handle active and inactive fairly in
 too_many_isolated

Iram reported that compaction's too_many_isolated() loops forever.
(http://www.spinics.net/lists/linux-mm/msg08123.html)

The meminfo when the situation happened was inactive anon is zero.  That's
because the system has no memory pressure until then.  While all anon
pages were in the active lru, compaction could select active lru as well
as inactive lru.  That's a different thing from vmscan's isolated.  So we
has been two too_many_isolated.

While compaction can isolate pages in both active and inactive, current
implementation of too_many_isolated only considers inactive.  It made
Iram's problem.

This patch handles active and inactive fairly.  That's because we can't
expect where from and how many compaction would isolated pages.

This patch changes (nr_isolated > nr_inactive) with
nr_isolated > (nr_active + nr_inactive) / 2.

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: Iram Shahzad <iram.shahzad@jp.fujitsu.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/compaction.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/mm/compaction.c b/mm/compaction.c
index 94cce51b0b35..4d709ee59013 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -214,15 +214,16 @@ static void acct_isolated(struct zone *zone, struct compact_control *cc)
 /* Similar to reclaim, but different enough that they don't share logic */
 static bool too_many_isolated(struct zone *zone)
 {
-
-	unsigned long inactive, isolated;
+	unsigned long active, inactive, isolated;
 
 	inactive = zone_page_state(zone, NR_INACTIVE_FILE) +
 					zone_page_state(zone, NR_INACTIVE_ANON);
+	active = zone_page_state(zone, NR_ACTIVE_FILE) +
+					zone_page_state(zone, NR_ACTIVE_ANON);
 	isolated = zone_page_state(zone, NR_ISOLATED_FILE) +
 					zone_page_state(zone, NR_ISOLATED_ANON);
 
-	return isolated > inactive;
+	return isolated > (inactive + active) / 2;
 }
 
 /*

From 0dcc48c15f63ee86c2fcd33968b08d651f0360a5 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Thu, 9 Sep 2010 16:38:01 -0700
Subject: [PATCH 239/728] memory hotplug: fix next block calculation in
 is_removable

next_active_pageblock() is for finding next _used_ freeblock.  It skips
several blocks when it finds there are a chunk of free pages lager than
pageblock.  But it has 2 bugs.

  1. We have no lock. page_order(page) - pageblock_order can be minus.
  2. pageblocks_stride += is wrong. it should skip page_order(p) of pages.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memory_hotplug.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index a4cfcdc00455..dd186c1a5d53 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -584,19 +584,19 @@ static inline int pageblock_free(struct page *page)
 /* Return the start of the next active pageblock after a given page */
 static struct page *next_active_pageblock(struct page *page)
 {
-	int pageblocks_stride;
-
 	/* Ensure the starting page is pageblock-aligned */
 	BUG_ON(page_to_pfn(page) & (pageblock_nr_pages - 1));
 
-	/* Move forward by at least 1 * pageblock_nr_pages */
-	pageblocks_stride = 1;
-
 	/* If the entire pageblock is free, move to the end of free page */
-	if (pageblock_free(page))
-		pageblocks_stride += page_order(page) - pageblock_order;
+	if (pageblock_free(page)) {
+		int order;
+		/* be careful. we don't have locks, page_order can be changed.*/
+		order = page_order(page);
+		if ((order < MAX_ORDER) && (order >= pageblock_order))
+			return page + (1 << order);
+	}
 
-	return page + (pageblocks_stride * pageblock_nr_pages);
+	return page + pageblock_nr_pages;
 }
 
 /* Checks if this range of memory is likely to be hot-removable. */

From 5affb607720d734ca572b8a77c5c7d62d3042b6f Mon Sep 17 00:00:00 2001
From: Gregory Bean <gbean@codeaurora.org>
Date: Thu, 9 Sep 2010 16:38:02 -0700
Subject: [PATCH 240/728] gpio: sx150x: correct and refine reset-on-probe
 behavior

Replace the arbitrary software-reset call from the device-probe
method, because:

- It is defective.  To work correctly, it should be two byte writes,
  not a single word write.  As it stands, it does nothing.

- Some devices with sx150x expanders installed have their NRESET pins
  ganged on the same line, so resetting one causes the others to reset -
  not a nice thing to do arbitrarily!

- The probe, usually taking place at boot, implies a recent hard-reset,
  so a software reset at this point is just a waste of energy anyway.

Therefore, make it optional, defaulting to off, as this will match the
common case of probing at powerup and also matches the current broken
no-op behavior.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpio/sx150x.c      | 26 +++++++++++++++++++++-----
 include/linux/i2c/sx150x.h |  4 ++++
 2 files changed, 25 insertions(+), 5 deletions(-)

diff --git a/drivers/gpio/sx150x.c b/drivers/gpio/sx150x.c
index b42f42ca70c3..823559ab0e24 100644
--- a/drivers/gpio/sx150x.c
+++ b/drivers/gpio/sx150x.c
@@ -459,16 +459,32 @@ static int sx150x_init_io(struct sx150x_chip *chip, u8 base, u16 cfg)
 	return err;
 }
 
+static int sx150x_reset(struct sx150x_chip *chip)
+{
+	int err;
+
+	err = i2c_smbus_write_byte_data(chip->client,
+					chip->dev_cfg->reg_reset,
+					0x12);
+	if (err < 0)
+		return err;
+
+	err = i2c_smbus_write_byte_data(chip->client,
+					chip->dev_cfg->reg_reset,
+					0x34);
+	return err;
+}
+
 static int sx150x_init_hw(struct sx150x_chip *chip,
 			struct sx150x_platform_data *pdata)
 {
 	int err = 0;
 
-	err = i2c_smbus_write_word_data(chip->client,
-					chip->dev_cfg->reg_reset,
-					0x3412);
-	if (err < 0)
-		return err;
+	if (pdata->reset_during_probe) {
+		err = sx150x_reset(chip);
+		if (err < 0)
+			return err;
+	}
 
 	err = sx150x_i2c_write(chip->client,
 			chip->dev_cfg->reg_misc,
diff --git a/include/linux/i2c/sx150x.h b/include/linux/i2c/sx150x.h
index ee3049cb9ba5..52baa79d69a7 100644
--- a/include/linux/i2c/sx150x.h
+++ b/include/linux/i2c/sx150x.h
@@ -63,6 +63,9 @@
  *            IRQ lines will appear.  Similarly to gpio_base, the expander
  *            will create a block of irqs beginning at this number.
  *            This value is ignored if irq_summary is < 0.
+ * @reset_during_probe: If set to true, the driver will trigger a full
+ *                      reset of the chip at the beginning of the probe
+ *                      in order to place it in a known state.
  */
 struct sx150x_platform_data {
 	unsigned gpio_base;
@@ -73,6 +76,7 @@ struct sx150x_platform_data {
 	u16      io_polarity;
 	int      irq_summary;
 	unsigned irq_base;
+	bool     reset_during_probe;
 };
 
 #endif /* __LINUX_I2C_SX150X_H */

From c956126c137d97acb6f4d56fa9572d0bcc84e4ed Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 9 Sep 2010 16:38:03 -0700
Subject: [PATCH 241/728] gpio: doc updates

There's been some recent confusion about error checking GPIO numbers.
briefly, it should be handled mostly during setup, when gpio_request() is
called, and NEVER by expectig gpio_is_valid to report more than
never-usable GPIO numbers.

[akpm@linux-foundation.org: terminate unterminated comment]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Eric Miao" <eric.y.miao@gmail.com>
Cc: "Ryan Mallon" <ryan@bluewatersys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/gpio.txt     | 22 ++++++++++++++--------
 include/asm-generic/gpio.h | 14 +++++++++++++-
 2 files changed, 27 insertions(+), 9 deletions(-)

diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index d96a6dba5748..9633da01ff46 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -109,17 +109,19 @@ use numbers 2000-2063 to identify GPIOs in a bank of I2C GPIO expanders.
 
 If you want to initialize a structure with an invalid GPIO number, use
 some negative number (perhaps "-EINVAL"); that will never be valid.  To
-test if a number could reference a GPIO, you may use this predicate:
+test if such number from such a structure could reference a GPIO, you
+may use this predicate:
 
 	int gpio_is_valid(int number);
 
 A number that's not valid will be rejected by calls which may request
 or free GPIOs (see below).  Other numbers may also be rejected; for
-example, a number might be valid but unused on a given board.
-
-Whether a platform supports multiple GPIO controllers is currently a
-platform-specific implementation issue.
+example, a number might be valid but temporarily unused on a given board.
 
+Whether a platform supports multiple GPIO controllers is a platform-specific
+implementation issue, as are whether that support can leave "holes" in the space
+of GPIO numbers, and whether new controllers can be added at runtime.  Such issues
+can affect things including whether adjacent GPIO numbers are both valid.
 
 Using GPIOs
 -----------
@@ -480,12 +482,16 @@ To support this framework, a platform's Kconfig will "select" either
 ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
 and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
 three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
-They may also want to provide a custom value for ARCH_NR_GPIOS.
 
-ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
+It may also provide a custom value for ARCH_NR_GPIOS, so that it better
+reflects the number of GPIOs in actual use on that platform, without
+wasting static table space.  (It should count both built-in/SoC GPIOs and
+also ones on GPIO expanders.
+
+ARCH_REQUIRE_GPIOLIB means that the gpiolib code will always get compiled
 into the kernel on that architecture.
 
-ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
+ARCH_WANT_OPTIONAL_GPIOLIB means the gpiolib code defaults to off and the user
 can enable it and build it into the kernel optionally.
 
 If neither of these options are selected, the platform does not support
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index c7376bf80b06..8ca18e26d7e3 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -16,15 +16,27 @@
  * While the GPIO programming interface defines valid GPIO numbers
  * to be in the range 0..MAX_INT, this library restricts them to the
  * smaller range 0..ARCH_NR_GPIOS-1.
+ *
+ * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of
+ * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is
+ * actually an estimate of a board-specific value.
  */
 
 #ifndef ARCH_NR_GPIOS
 #define ARCH_NR_GPIOS		256
 #endif
 
+/*
+ * "valid" GPIO numbers are nonnegative and may be passed to
+ * setup routines like gpio_request().  only some valid numbers
+ * can successfully be requested and used.
+ *
+ * Invalid GPIO numbers are useful for indicating no-such-GPIO in
+ * platform data and other tables.
+ */
+
 static inline int gpio_is_valid(int number)
 {
-	/* only some non-negative numbers are valid */
 	return ((unsigned)number) < ARCH_NR_GPIOS;
 }
 

From b7bbbf354ed0edbbffdc70c9c17f1a5d4d78204c Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Thu, 9 Sep 2010 16:38:04 -0700
Subject: [PATCH 242/728] MAINTAINERS: correct entry for legacy RTC-driver

Because no one dared to remove it so far, let's keep the entry correct, at
least.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index a3da87f82a75..9800de5ec222 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4838,12 +4838,10 @@ F:	kernel/rcu*
 F:	kernel/srcu*
 X:	kernel/rcutorture.c
 
-REAL TIME CLOCK DRIVER
+REAL TIME CLOCK DRIVER (LEGACY)
 M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 S:	Maintained
-F:	Documentation/rtc.txt
-F:	drivers/rtc/
-F:	include/linux/rtc.h
+F:	drivers/char/rtc.c
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
 M:	Alessandro Zummo <a.zummo@towertech.it>

From 47016434257b90445113eed1c5b8b57eb2d35330 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Thu, 9 Sep 2010 16:38:04 -0700
Subject: [PATCH 243/728] drivers/rtc/rtc-pl031.c: do not mark PL031 IRQ as
 shared

It was a mistake to mark the PL031 IRQ as shared (for the U8500),
we misread the datasheet. Get rid of this.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Jonas Aberg <jonas.aberg@stericsson.com>
Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-pl031.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 6c418fe7f288..b7a6690e5b35 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -403,7 +403,7 @@ static int pl031_probe(struct amba_device *adev, struct amba_id *id)
 	}
 
 	if (request_irq(adev->irq[0], pl031_interrupt,
-			IRQF_DISABLED | IRQF_SHARED, "rtc-pl031", ldata)) {
+			IRQF_DISABLED, "rtc-pl031", ldata)) {
 		ret = -EIO;
 		goto out_no_irq;
 	}

From ac8456d6f9a3011c824176bd6084d39e5f70a382 Mon Sep 17 00:00:00 2001
From: Gary King <gking@nvidia.com>
Date: Thu, 9 Sep 2010 16:38:05 -0700
Subject: [PATCH 244/728] bounce: call flush_dcache_page() after
 bounce_copy_vec()

I have been seeing problems on Tegra 2 (ARMv7 SMP) systems with HIGHMEM
enabled on 2.6.35 (plus some patches targetted at 2.6.36 to perform cache
maintenance lazily), and the root cause appears to be that the mm bouncing
code is calling flush_dcache_page before it copies the bounce buffer into
the bio.

The bounced page needs to be flushed after data is copied into it, to
ensure that architecture implementations can synchronize instruction and
data caches if necessary.

Signed-off-by: Gary King <gking@nvidia.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bounce.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/bounce.c b/mm/bounce.c
index 13b6dad1eed2..1481de68184b 100644
--- a/mm/bounce.c
+++ b/mm/bounce.c
@@ -116,8 +116,8 @@ static void copy_to_high_bio_irq(struct bio *to, struct bio *from)
 		 */
 		vfrom = page_address(fromvec->bv_page) + tovec->bv_offset;
 
-		flush_dcache_page(tovec->bv_page);
 		bounce_copy_vec(tovec, vfrom);
+		flush_dcache_page(tovec->bv_page);
 	}
 }
 

From 910321ea817a202ff70fac666e37e2c8e2f88823 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Thu, 9 Sep 2010 16:38:07 -0700
Subject: [PATCH 245/728] swap: revert special hibernation allocation

Please revert 2.6.36-rc commit d2997b1042ec150616c1963b5e5e919ffd0b0ebf
"hibernation: freeze swap at hibernation".  It complicated matters by
adding a second swap allocation path, just for hibernation; without in any
way fixing the issue that it was intended to address - page reclaim after
fixing the hibernation image might free swap from a page already imaged as
swapcache, letting its swap be reallocated to store a different page of
the image: resulting in data corruption if the imaged page were freed as
clean then swapped back in.  Pages freed to si->swap_map were still in
danger of being reallocated by the alternative allocation path.

I guess it inadvertently fixed slow SSD swap allocation for hibernation,
as reported by Nigel Cunningham: by missing out the discards that occur on
the usual swap allocation path; but that was unintentional, and needs a
separate fix.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/swap.h     |  8 +---
 kernel/power/hibernate.c |  1 -
 kernel/power/snapshot.c  |  1 -
 kernel/power/swap.c      |  6 +--
 mm/swapfile.c            | 94 ++++++++++------------------------------
 5 files changed, 26 insertions(+), 84 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index 2fee51a11b73..bf4eb62506db 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -315,6 +315,7 @@ extern long nr_swap_pages;
 extern long total_swap_pages;
 extern void si_swapinfo(struct sysinfo *);
 extern swp_entry_t get_swap_page(void);
+extern swp_entry_t get_swap_page_of_type(int);
 extern int valid_swaphandles(swp_entry_t, unsigned long *);
 extern int add_swap_count_continuation(swp_entry_t, gfp_t);
 extern void swap_shmem_alloc(swp_entry_t);
@@ -331,13 +332,6 @@ extern int reuse_swap_page(struct page *);
 extern int try_to_free_swap(struct page *);
 struct backing_dev_info;
 
-#ifdef CONFIG_HIBERNATION
-void hibernation_freeze_swap(void);
-void hibernation_thaw_swap(void);
-swp_entry_t get_swap_for_hibernation(int type);
-void swap_free_for_hibernation(swp_entry_t val);
-#endif
-
 /* linux/mm/thrash.c */
 extern struct mm_struct *swap_token_mm;
 extern void grab_swap_token(struct mm_struct *);
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index c77963938bca..8dc31e02ae12 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -338,7 +338,6 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
-	hibernation_freeze_swap();
 	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
 	error = dpm_suspend_start(PMSG_FREEZE);
 	if (error)
diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 5e7edfb05e66..f6cd6faf84fd 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1086,7 +1086,6 @@ void swsusp_free(void)
 	buffer = NULL;
 	alloc_normal = 0;
 	alloc_highmem = 0;
-	hibernation_thaw_swap();
 }
 
 /* Helper functions used for the shrinking of memory. */
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index 5d0059eed3e4..e6a5bdf61a37 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -136,10 +136,10 @@ sector_t alloc_swapdev_block(int swap)
 {
 	unsigned long offset;
 
-	offset = swp_offset(get_swap_for_hibernation(swap));
+	offset = swp_offset(get_swap_page_of_type(swap));
 	if (offset) {
 		if (swsusp_extents_insert(offset))
-			swap_free_for_hibernation(swp_entry(swap, offset));
+			swap_free(swp_entry(swap, offset));
 		else
 			return swapdev_block(swap, offset);
 	}
@@ -163,7 +163,7 @@ void free_all_swap_pages(int swap)
 		ext = container_of(node, struct swsusp_extent, node);
 		rb_erase(node, &swsusp_extents);
 		for (offset = ext->start; offset <= ext->end; offset++)
-			swap_free_for_hibernation(swp_entry(swap, offset));
+			swap_free(swp_entry(swap, offset));
 
 		kfree(ext);
 	}
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 1f3f9c59a73a..f08d165871b3 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -47,8 +47,6 @@ long nr_swap_pages;
 long total_swap_pages;
 static int least_priority;
 
-static bool swap_for_hibernation;
-
 static const char Bad_file[] = "Bad swap file entry ";
 static const char Unused_file[] = "Unused swap file entry ";
 static const char Bad_offset[] = "Bad swap offset entry ";
@@ -453,8 +451,6 @@ swp_entry_t get_swap_page(void)
 	spin_lock(&swap_lock);
 	if (nr_swap_pages <= 0)
 		goto noswap;
-	if (swap_for_hibernation)
-		goto noswap;
 	nr_swap_pages--;
 
 	for (type = swap_list.next; type >= 0 && wrapped < 2; type = next) {
@@ -487,6 +483,28 @@ noswap:
 	return (swp_entry_t) {0};
 }
 
+/* The only caller of this function is now susupend routine */
+swp_entry_t get_swap_page_of_type(int type)
+{
+	struct swap_info_struct *si;
+	pgoff_t offset;
+
+	spin_lock(&swap_lock);
+	si = swap_info[type];
+	if (si && (si->flags & SWP_WRITEOK)) {
+		nr_swap_pages--;
+		/* This is called for allocating swap entry, not cache */
+		offset = scan_swap_map(si, 1);
+		if (offset) {
+			spin_unlock(&swap_lock);
+			return swp_entry(type, offset);
+		}
+		nr_swap_pages++;
+	}
+	spin_unlock(&swap_lock);
+	return (swp_entry_t) {0};
+}
+
 static struct swap_info_struct *swap_info_get(swp_entry_t entry)
 {
 	struct swap_info_struct *p;
@@ -746,74 +764,6 @@ int mem_cgroup_count_swap_user(swp_entry_t ent, struct page **pagep)
 #endif
 
 #ifdef CONFIG_HIBERNATION
-
-static pgoff_t hibernation_offset[MAX_SWAPFILES];
-/*
- * Once hibernation starts to use swap, we freeze swap_map[]. Otherwise,
- * saved swap_map[] image to the disk will be an incomplete because it's
- * changing without synchronization with hibernation snap shot.
- * At resume, we just make swap_for_hibernation=false. We can forget
- * used maps easily.
- */
-void hibernation_freeze_swap(void)
-{
-	int i;
-
-	spin_lock(&swap_lock);
-
-	printk(KERN_INFO "PM: Freeze Swap\n");
-	swap_for_hibernation = true;
-	for (i = 0; i < MAX_SWAPFILES; i++)
-		hibernation_offset[i] = 1;
-	spin_unlock(&swap_lock);
-}
-
-void hibernation_thaw_swap(void)
-{
-	spin_lock(&swap_lock);
-	if (swap_for_hibernation) {
-		printk(KERN_INFO "PM: Thaw Swap\n");
-		swap_for_hibernation = false;
-	}
-	spin_unlock(&swap_lock);
-}
-
-/*
- * Because updateing swap_map[] can make not-saved-status-change,
- * we use our own easy allocator.
- * Please see kernel/power/swap.c, Used swaps are recorded into
- * RB-tree.
- */
-swp_entry_t get_swap_for_hibernation(int type)
-{
-	pgoff_t off;
-	swp_entry_t val = {0};
-	struct swap_info_struct *si;
-
-	spin_lock(&swap_lock);
-
-	si = swap_info[type];
-	if (!si || !(si->flags & SWP_WRITEOK))
-		goto done;
-
-	for (off = hibernation_offset[type]; off < si->max; ++off) {
-		if (!si->swap_map[off])
-			break;
-	}
-	if (off < si->max) {
-		val = swp_entry(type, off);
-		hibernation_offset[type] = off + 1;
-	}
-done:
-	spin_unlock(&swap_lock);
-	return val;
-}
-
-void swap_free_for_hibernation(swp_entry_t ent)
-{
-	/* Nothing to do */
-}
-
 /*
  * Find the swap type that corresponds to given device (if any).
  *

From b73d7fcecd93dc15eaa3c45c8c587b613f6673c4 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Thu, 9 Sep 2010 16:38:09 -0700
Subject: [PATCH 246/728] swap: prevent reuse during hibernation

Move the hibernation check from scan_swap_map() into try_to_free_swap():
to catch not only the common case when hibernation's allocation itself
triggers swap reuse, but also the less likely case when concurrent page
reclaim (shrink_page_list) might happen to try_to_free_swap from a page.

Hibernation already clears __GFP_IO from the gfp_allowed_mask, to stop
reclaim from going to swap: check that to prevent swap reuse too.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ondrej Zary <linux@rainbow-software.org>
Cc: Andrea Gelmini <andrea.gelmini@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/swapfile.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/mm/swapfile.c b/mm/swapfile.c
index f08d165871b3..ed5151079f59 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -318,10 +318,8 @@ checks:
 	if (offset > si->highest_bit)
 		scan_base = offset = si->lowest_bit;
 
-	/* reuse swap entry of cache-only swap if not hibernation. */
-	if (vm_swap_full()
-		&& usage == SWAP_HAS_CACHE
-		&& si->swap_map[offset] == SWAP_HAS_CACHE) {
+	/* reuse swap entry of cache-only swap if not busy. */
+	if (vm_swap_full() && si->swap_map[offset] == SWAP_HAS_CACHE) {
 		int swap_was_freed;
 		spin_unlock(&swap_lock);
 		swap_was_freed = __try_to_reclaim_swap(si, offset);
@@ -688,6 +686,24 @@ int try_to_free_swap(struct page *page)
 	if (page_swapcount(page))
 		return 0;
 
+	/*
+	 * Once hibernation has begun to create its image of memory,
+	 * there's a danger that one of the calls to try_to_free_swap()
+	 * - most probably a call from __try_to_reclaim_swap() while
+	 * hibernation is allocating its own swap pages for the image,
+	 * but conceivably even a call from memory reclaim - will free
+	 * the swap from a page which has already been recorded in the
+	 * image as a clean swapcache page, and then reuse its swap for
+	 * another page of the image.  On waking from hibernation, the
+	 * original page might be freed under memory pressure, then
+	 * later read back in from swap, now with the wrong data.
+	 *
+	 * Hibernation clears bits from gfp_allowed_mask to prevent
+	 * memory reclaim from writing to disk, so check that here.
+	 */
+	if (!(gfp_allowed_mask & __GFP_IO))
+		return 0;
+
 	delete_from_swap_cache(page);
 	SetPageDirty(page);
 	return 1;

From 8f2ae0faa3a119158c4dcfe89926d6fad5f5332c Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Thu, 9 Sep 2010 16:38:10 -0700
Subject: [PATCH 247/728] swap: do not send discards as barriers

The swap code already uses synchronous discards, no need to add I/O
barriers.

This fixes the worst of the terrible slowdown in swap allocation for
hibernation, reported on 2.6.35 by Nigel Cunningham; but does not entirely
eliminate that regression.

[tj@kernel.org: superflous newlines removed]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nigel Cunningham <nigel@tuxonice.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/swapfile.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/mm/swapfile.c b/mm/swapfile.c
index ed5151079f59..1894dead0b58 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -139,8 +139,7 @@ static int discard_swap(struct swap_info_struct *si)
 	nr_blocks = ((sector_t)se->nr_pages - 1) << (PAGE_SHIFT - 9);
 	if (nr_blocks) {
 		err = blkdev_issue_discard(si->bdev, start_block,
-				nr_blocks, GFP_KERNEL,
-				BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER);
+				nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT);
 		if (err)
 			return err;
 		cond_resched();
@@ -151,8 +150,7 @@ static int discard_swap(struct swap_info_struct *si)
 		nr_blocks = (sector_t)se->nr_pages << (PAGE_SHIFT - 9);
 
 		err = blkdev_issue_discard(si->bdev, start_block,
-				nr_blocks, GFP_KERNEL,
-				BLKDEV_IFL_WAIT | BLKDEV_IFL_BARRIER);
+				nr_blocks, GFP_KERNEL, BLKDEV_IFL_WAIT);
 		if (err)
 			break;
 
@@ -191,8 +189,7 @@ static void discard_swap_cluster(struct swap_info_struct *si,
 			start_block <<= PAGE_SHIFT - 9;
 			nr_blocks <<= PAGE_SHIFT - 9;
 			if (blkdev_issue_discard(si->bdev, start_block,
-				    nr_blocks, GFP_NOIO, BLKDEV_IFL_WAIT |
-							BLKDEV_IFL_BARRIER))
+				    nr_blocks, GFP_NOIO, BLKDEV_IFL_WAIT))
 				break;
 		}
 

From 3399446632739fcd05fd8b272b476a69c6e6d14a Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Thu, 9 Sep 2010 16:38:11 -0700
Subject: [PATCH 248/728] swap: discard while swapping only if
 SWAP_FLAG_DISCARD

Tests with recent firmware on Intel X25-M 80GB and OCZ Vertex 60GB SSDs
show a shift since I last tested in December: in part because of firmware
updates, in part because of the necessary move from barriers to awaiting
completion at the block layer.  While discard at swapon still shows as
slightly beneficial on both, discarding 1MB swap cluster when allocating
is now disadvanteous: adds 25% overhead on Intel, adds 230% on OCZ (YMMV).

Surrender: discard as presently implemented is more hindrance than help
for swap; but might prove useful on other devices, or with improvements.
So continue to do the discard at swapon, but make discard while swapping
conditional on a SWAP_FLAG_DISCARD to sys_swapon() (which has been using
only the lower 16 bits of int flags).

We can add a --discard or -d to swapon(8), and a "discard" to swap in
/etc/fstab: matching the mount option for btrfs, ext4, fat, gfs2, nilfs2.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nigel Cunningham <nigel@tuxonice.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/swap.h | 3 ++-
 mm/swapfile.c        | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index bf4eb62506db..7cdd63366f88 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -19,6 +19,7 @@ struct bio;
 #define SWAP_FLAG_PREFER	0x8000	/* set if swap priority specified */
 #define SWAP_FLAG_PRIO_MASK	0x7fff
 #define SWAP_FLAG_PRIO_SHIFT	0
+#define SWAP_FLAG_DISCARD	0x10000 /* discard swap cluster after use */
 
 static inline int current_is_kswapd(void)
 {
@@ -142,7 +143,7 @@ struct swap_extent {
 enum {
 	SWP_USED	= (1 << 0),	/* is slot in swap_info[] used? */
 	SWP_WRITEOK	= (1 << 1),	/* ok to write to this swap?	*/
-	SWP_DISCARDABLE = (1 << 2),	/* blkdev supports discard */
+	SWP_DISCARDABLE = (1 << 2),	/* swapon+blkdev support discard */
 	SWP_DISCARDING	= (1 << 3),	/* now discarding a free cluster */
 	SWP_SOLIDSTATE	= (1 << 4),	/* blkdev seeks are cheap */
 	SWP_CONTINUED	= (1 << 5),	/* swap_map has count continuation */
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 1894dead0b58..7c703ff2f36f 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2047,7 +2047,7 @@ SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 			p->flags |= SWP_SOLIDSTATE;
 			p->cluster_next = 1 + (random32() % p->highest_bit);
 		}
-		if (discard_swap(p) == 0)
+		if (discard_swap(p) == 0 && (swap_flags & SWAP_FLAG_DISCARD))
 			p->flags |= SWP_DISCARDABLE;
 	}
 

From 3ab04d5cf9736b7a4e9dfcf28285d8663b01aa0e Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@suse.de>
Date: Thu, 9 Sep 2010 16:38:12 -0700
Subject: [PATCH 249/728] vfs: take O_NONBLOCK out of the O_* uniqueness test

O_NONBLOCK on parisc has a dual value:

#define O_NONBLOCK	000200004 /* HPUX has separate NDELAY & NONBLOCK */

It is caught by the O_* bits uniqueness check and leads to a parisc
compile error.  The fix would be to take O_NONBLOCK out.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: Jamie Lokier <jamie@shareable.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fcntl.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index 6769fd0f35b8..f8cc34f542c3 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -769,11 +769,15 @@ EXPORT_SYMBOL(kill_fasync);
 
 static int __init fcntl_init(void)
 {
-	/* please add new bits here to ensure allocation uniqueness */
-	BUILD_BUG_ON(19 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
+	/*
+	 * Please add new bits here to ensure allocation uniqueness.
+	 * Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
+	 * is defined as O_NONBLOCK on some platforms and not on others.
+	 */
+	BUILD_BUG_ON(18 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
 		O_RDONLY	| O_WRONLY	| O_RDWR	|
 		O_CREAT		| O_EXCL	| O_NOCTTY	|
-		O_TRUNC		| O_APPEND	| O_NONBLOCK	|
+		O_TRUNC		| O_APPEND	| /* O_NONBLOCK	| */
 		__O_SYNC	| O_DSYNC	| FASYNC	|
 		O_DIRECT	| O_LARGEFILE	| O_DIRECTORY	|
 		O_NOFOLLOW	| O_NOATIME	| O_CLOEXEC	|

From 5ee28a447625b9fe64fbf7cff026561084fc5f16 Mon Sep 17 00:00:00 2001
From: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Date: Thu, 9 Sep 2010 16:38:14 -0700
Subject: [PATCH 250/728] vmstat: update zone stat threshold when onlining a
 cpu

refresh_zone_stat_thresholds() calculates parameter based on the number of
online cpus.  It's called at cpu offlining but needs to be called at
onlining, too.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmstat.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/vmstat.c b/mm/vmstat.c
index f389168f9a83..a8d6b59e609a 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -998,6 +998,7 @@ static int __cpuinit vmstat_cpuup_callback(struct notifier_block *nfb,
 	switch (action) {
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
+		refresh_zone_stat_thresholds();
 		start_cpu_timer(cpu);
 		node_set_state(cpu_to_node(cpu), N_CPU);
 		break;

From 72853e2991a2702ae93aaf889ac7db743a415dd3 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Thu, 9 Sep 2010 16:38:16 -0700
Subject: [PATCH 251/728] mm: page allocator: update free page counters after
 pages are placed on the free list

When allocating a page, the system uses NR_FREE_PAGES counters to
determine if watermarks would remain intact after the allocation was made.
This check is made without interrupts disabled or the zone lock held and
so is race-prone by nature.  Unfortunately, when pages are being freed in
batch, the counters are updated before the pages are added on the list.
During this window, the counters are misleading as the pages do not exist
yet.  When under significant pressure on systems with large numbers of
CPUs, it's possible for processes to make progress even though they should
have been stalled.  This is particularly problematic if a number of the
processes are using GFP_ATOMIC as the min watermark can be accidentally
breached and in extreme cases, the system can livelock.

This patch updates the counters after the pages have been added to the
list.  This makes the allocator more cautious with respect to preserving
the watermarks and mitigates livelock possibilities.

[akpm@linux-foundation.org: avoid modifying incoming args]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index a9649f4b261e..452e2ba06c7c 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -588,13 +588,13 @@ static void free_pcppages_bulk(struct zone *zone, int count,
 {
 	int migratetype = 0;
 	int batch_free = 0;
+	int to_free = count;
 
 	spin_lock(&zone->lock);
 	zone->all_unreclaimable = 0;
 	zone->pages_scanned = 0;
 
-	__mod_zone_page_state(zone, NR_FREE_PAGES, count);
-	while (count) {
+	while (to_free) {
 		struct page *page;
 		struct list_head *list;
 
@@ -619,8 +619,9 @@ static void free_pcppages_bulk(struct zone *zone, int count,
 			/* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
 			__free_one_page(page, zone, 0, page_private(page));
 			trace_mm_page_pcpu_drain(page, 0, page_private(page));
-		} while (--count && --batch_free && !list_empty(list));
+		} while (--to_free && --batch_free && !list_empty(list));
 	}
+	__mod_zone_page_state(zone, NR_FREE_PAGES, count);
 	spin_unlock(&zone->lock);
 }
 
@@ -631,8 +632,8 @@ static void free_one_page(struct zone *zone, struct page *page, int order,
 	zone->all_unreclaimable = 0;
 	zone->pages_scanned = 0;
 
-	__mod_zone_page_state(zone, NR_FREE_PAGES, 1 << order);
 	__free_one_page(page, zone, order, migratetype);
+	__mod_zone_page_state(zone, NR_FREE_PAGES, 1 << order);
 	spin_unlock(&zone->lock);
 }
 

From aa45484031ddee09b06350ab8528bfe5b2c76d1c Mon Sep 17 00:00:00 2001
From: Christoph Lameter <cl@linux.com>
Date: Thu, 9 Sep 2010 16:38:17 -0700
Subject: [PATCH 252/728] mm: page allocator: calculate a better estimate of
 NR_FREE_PAGES when memory is low and kswapd is awake

Ordinarily watermark checks are based on the vmstat NR_FREE_PAGES as it is
cheaper than scanning a number of lists.  To avoid synchronization
overhead, counter deltas are maintained on a per-cpu basis and drained
both periodically and when the delta is above a threshold.  On large CPU
systems, the difference between the estimated and real value of
NR_FREE_PAGES can be very high.  If NR_FREE_PAGES is much higher than
number of real free page in buddy, the VM can allocate pages below min
watermark, at worst reducing the real number of pages to zero.  Even if
the OOM killer kills some victim for freeing memory, it may not free
memory if the exit path requires a new page resulting in livelock.

This patch introduces a zone_page_state_snapshot() function (courtesy of
Christoph) that takes a slightly more accurate view of an arbitrary vmstat
counter.  It is used to read NR_FREE_PAGES while kswapd is awake to avoid
the watermark being accidentally broken.  The estimate is not perfect and
may result in cache line bounces but is expected to be lighter than the
IPI calls necessary to continually drain the per-cpu counters while kswapd
is awake.

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mmzone.h | 13 +++++++++++++
 include/linux/vmstat.h | 22 ++++++++++++++++++++++
 mm/mmzone.c            | 21 +++++++++++++++++++++
 mm/page_alloc.c        |  4 ++--
 mm/vmstat.c            | 15 ++++++++++++++-
 5 files changed, 72 insertions(+), 3 deletions(-)

diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 6e6e62648a4d..3984c4eb41fd 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -283,6 +283,13 @@ struct zone {
 	/* zone watermarks, access with *_wmark_pages(zone) macros */
 	unsigned long watermark[NR_WMARK];
 
+	/*
+	 * When free pages are below this point, additional steps are taken
+	 * when reading the number of free pages to avoid per-cpu counter
+	 * drift allowing watermarks to be breached
+	 */
+	unsigned long percpu_drift_mark;
+
 	/*
 	 * We don't know if the memory that we're going to allocate will be freeable
 	 * or/and it will be released eventually, so to avoid totally wasting several
@@ -441,6 +448,12 @@ static inline int zone_is_oom_locked(const struct zone *zone)
 	return test_bit(ZONE_OOM_LOCKED, &zone->flags);
 }
 
+#ifdef CONFIG_SMP
+unsigned long zone_nr_free_pages(struct zone *zone);
+#else
+#define zone_nr_free_pages(zone) zone_page_state(zone, NR_FREE_PAGES)
+#endif /* CONFIG_SMP */
+
 /*
  * The "priority" of VM scanning is how much of the queues we will scan in one
  * go. A value of 12 for DEF_PRIORITY implies that we will scan 1/4096th of the
diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h
index 7f43ccdc1d38..eaaea37b3b75 100644
--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -170,6 +170,28 @@ static inline unsigned long zone_page_state(struct zone *zone,
 	return x;
 }
 
+/*
+ * More accurate version that also considers the currently pending
+ * deltas. For that we need to loop over all cpus to find the current
+ * deltas. There is no synchronization so the result cannot be
+ * exactly accurate either.
+ */
+static inline unsigned long zone_page_state_snapshot(struct zone *zone,
+					enum zone_stat_item item)
+{
+	long x = atomic_long_read(&zone->vm_stat[item]);
+
+#ifdef CONFIG_SMP
+	int cpu;
+	for_each_online_cpu(cpu)
+		x += per_cpu_ptr(zone->pageset, cpu)->vm_stat_diff[item];
+
+	if (x < 0)
+		x = 0;
+#endif
+	return x;
+}
+
 extern unsigned long global_reclaimable_pages(void);
 extern unsigned long zone_reclaimable_pages(struct zone *zone);
 
diff --git a/mm/mmzone.c b/mm/mmzone.c
index f5b7d1760213..e35bfb82c855 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -87,3 +87,24 @@ int memmap_valid_within(unsigned long pfn,
 	return 1;
 }
 #endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
+
+#ifdef CONFIG_SMP
+/* Called when a more accurate view of NR_FREE_PAGES is needed */
+unsigned long zone_nr_free_pages(struct zone *zone)
+{
+	unsigned long nr_free_pages = zone_page_state(zone, NR_FREE_PAGES);
+
+	/*
+	 * While kswapd is awake, it is considered the zone is under some
+	 * memory pressure. Under pressure, there is a risk that
+	 * per-cpu-counter-drift will allow the min watermark to be breached
+	 * potentially causing a live-lock. While kswapd is awake and
+	 * free pages are low, get a better estimate for free pages
+	 */
+	if (nr_free_pages < zone->percpu_drift_mark &&
+			!waitqueue_active(&zone->zone_pgdat->kswapd_wait))
+		return zone_page_state_snapshot(zone, NR_FREE_PAGES);
+
+	return nr_free_pages;
+}
+#endif /* CONFIG_SMP */
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 452e2ba06c7c..b2d21e06d45d 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1462,7 +1462,7 @@ int zone_watermark_ok(struct zone *z, int order, unsigned long mark,
 {
 	/* free_pages my go negative - that's OK */
 	long min = mark;
-	long free_pages = zone_page_state(z, NR_FREE_PAGES) - (1 << order) + 1;
+	long free_pages = zone_nr_free_pages(z) - (1 << order) + 1;
 	int o;
 
 	if (alloc_flags & ALLOC_HIGH)
@@ -2424,7 +2424,7 @@ void show_free_areas(void)
 			" all_unreclaimable? %s"
 			"\n",
 			zone->name,
-			K(zone_page_state(zone, NR_FREE_PAGES)),
+			K(zone_nr_free_pages(zone)),
 			K(min_wmark_pages(zone)),
 			K(low_wmark_pages(zone)),
 			K(high_wmark_pages(zone)),
diff --git a/mm/vmstat.c b/mm/vmstat.c
index a8d6b59e609a..355a9e669aaa 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -138,11 +138,24 @@ static void refresh_zone_stat_thresholds(void)
 	int threshold;
 
 	for_each_populated_zone(zone) {
+		unsigned long max_drift, tolerate_drift;
+
 		threshold = calculate_threshold(zone);
 
 		for_each_online_cpu(cpu)
 			per_cpu_ptr(zone->pageset, cpu)->stat_threshold
 							= threshold;
+
+		/*
+		 * Only set percpu_drift_mark if there is a danger that
+		 * NR_FREE_PAGES reports the low watermark is ok when in fact
+		 * the min watermark could be breached by an allocation
+		 */
+		tolerate_drift = low_wmark_pages(zone) - min_wmark_pages(zone);
+		max_drift = num_online_cpus() * threshold;
+		if (max_drift > tolerate_drift)
+			zone->percpu_drift_mark = high_wmark_pages(zone) +
+					max_drift;
 	}
 }
 
@@ -813,7 +826,7 @@ static void zoneinfo_show_print(struct seq_file *m, pg_data_t *pgdat,
 		   "\n        scanned  %lu"
 		   "\n        spanned  %lu"
 		   "\n        present  %lu",
-		   zone_page_state(zone, NR_FREE_PAGES),
+		   zone_nr_free_pages(zone),
 		   min_wmark_pages(zone),
 		   low_wmark_pages(zone),
 		   high_wmark_pages(zone),

From 9ee493ce0a60bf42c0f8fd0b0fe91df5704a1cbf Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Thu, 9 Sep 2010 16:38:18 -0700
Subject: [PATCH 253/728] mm: page allocator: drain per-cpu lists after direct
 reclaim allocation fails

When under significant memory pressure, a process enters direct reclaim
and immediately afterwards tries to allocate a page.  If it fails and no
further progress is made, it's possible the system will go OOM.  However,
on systems with large amounts of memory, it's possible that a significant
number of pages are on per-cpu lists and inaccessible to the calling
process.  This leads to a process entering direct reclaim more often than
it should increasing the pressure on the system and compounding the
problem.

This patch notes that if direct reclaim is making progress but allocations
are still failing that the system is already under heavy pressure.  In
this case, it drains the per-cpu lists and tries the allocation a second
time before continuing.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index b2d21e06d45d..a8cfa9cc6e86 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1847,6 +1847,7 @@ __alloc_pages_direct_reclaim(gfp_t gfp_mask, unsigned int order,
 	struct page *page = NULL;
 	struct reclaim_state reclaim_state;
 	struct task_struct *p = current;
+	bool drained = false;
 
 	cond_resched();
 
@@ -1865,14 +1866,25 @@ __alloc_pages_direct_reclaim(gfp_t gfp_mask, unsigned int order,
 
 	cond_resched();
 
-	if (order != 0)
-		drain_all_pages();
+	if (unlikely(!(*did_some_progress)))
+		return NULL;
 
-	if (likely(*did_some_progress))
-		page = get_page_from_freelist(gfp_mask, nodemask, order,
+retry:
+	page = get_page_from_freelist(gfp_mask, nodemask, order,
 					zonelist, high_zoneidx,
 					alloc_flags, preferred_zone,
 					migratetype);
+
+	/*
+	 * If an allocation failed after direct reclaim, it could be because
+	 * pages are pinned on the per-cpu lists. Drain them and try again
+	 */
+	if (!page && !drained) {
+		drain_all_pages();
+		drained = true;
+		goto retry;
+	}
+
 	return page;
 }
 

From eee743fd7eac9f2ea69ad06d093dfb5a12538fe5 Mon Sep 17 00:00:00 2001
From: "Jorge Boncompte [DTI2]" <jorge@dti2.net>
Date: Thu, 9 Sep 2010 16:38:19 -0700
Subject: [PATCH 254/728] minix: fix regression in minix_mkdir()

Commit 9eed1fb721c ("minix: replace inode uid,gid,mode init with helper")
broke directory creation on minix filesystems.

Fix it by passing the needed mode flag to inode init helper.

Signed-off-by: Jorge Boncompte [DTI2] <jorge@dti2.net>
Cc: Dmitry Monakhov <dmonakhov@openvz.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>		[2.6.35.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/minix/namei.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index e20ee85955d1..f3f3578393a4 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -115,7 +115,7 @@ static int minix_mkdir(struct inode * dir, struct dentry *dentry, int mode)
 
 	inode_inc_link_count(dir);
 
-	inode = minix_new_inode(dir, mode, &err);
+	inode = minix_new_inode(dir, S_IFDIR | mode, &err);
 	if (!inode)
 		goto out_dir;
 

From 40c6023031369ae5573e622ca54fa3ffe89fb865 Mon Sep 17 00:00:00 2001
From: Tejun Heo <teheo@novell.com>
Date: Thu, 9 Sep 2010 17:13:31 +0200
Subject: [PATCH 255/728] libata,pata_via: revert ata_wait_idle() removal from
 ata_sff/via_tf_load()

Commit 978c0666 (libata: Remove excess delay in the tf_load path)
removed ata_wait_idle() from ata_sff_tf_load() and via_tf_load().
This caused obscure detection problems in sata_sil.

  https://bugzilla.kernel.org/show_bug.cgi?id=16606

The commit was pure performance optimization.  Revert it for now.

Reported-by: Dieter Plaetinck <dieter@plaetinck.be>
Reported-by: Jan Beulich <JBeulich@novell.com>
Bisected-by: gianluca <gianluca@sottospazio.it>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-sff.c | 3 +++
 drivers/ata/pata_via.c   | 2 ++
 2 files changed, 5 insertions(+)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3b82d8ef76f0..dee3c2c52562 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -418,6 +418,7 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 		if (ioaddr->ctl_addr)
 			iowrite8(tf->ctl, ioaddr->ctl_addr);
 		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
 	}
 
 	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
@@ -453,6 +454,8 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 		iowrite8(tf->device, ioaddr->device_addr);
 		VPRINTK("device 0x%X\n", tf->device);
 	}
+
+	ata_wait_idle(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_tf_load);
 
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 5e659885de16..ac8d7d97e408 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -417,6 +417,8 @@ static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 			tf->lbam,
 			tf->lbah);
 	}
+
+	ata_wait_idle(ap);
 }
 
 static int via_port_start(struct ata_port *ap)

From 238e149c7a92eb79ab9f48c171e907a5bde18333 Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Thu, 9 Sep 2010 09:42:40 -0700
Subject: [PATCH 256/728] ata_piix: IDE Mode SATA patch for Intel Patsburg
 DeviceIDs

This patch adds the Intel Patsburg (PCH) IDE mode SATA Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 3971bc0a4838..d712675d0a96 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -302,6 +302,10 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (CPT) */
 	{ 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PBG) */
+	{ 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (PBG) */
+	{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	{ }	/* terminate list */
 };
 

From 992b3fb9b5391bc4de5b42bb810dc6dd583a6c4a Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Thu, 9 Sep 2010 09:44:56 -0700
Subject: [PATCH 257/728] ahci: AHCI and RAID mode SATA patch for Intel
 Patsburg DeviceIDs

This patch adds the Intel Patsburg (PCH) SATA AHCI and RAID Controller
DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 013727b20417..ff1c945fba98 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -253,6 +253,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */
 	{ PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */
 	{ PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */
+	{ PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
+	{ PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */
+	{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,

From e2f3d75fc0e4a0d03c61872bad39ffa2e74a04ff Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 7 Sep 2010 14:05:31 +0200
Subject: [PATCH 258/728] libata: skip EH autopsy and recovery during suspend

For some mysterious reason, certain hardware reacts badly to usual EH
actions while the system is going for suspend.  As the devices won't
be needed until the system is resumed, ask EH to skip usual autopsy
and recovery and proceed directly to suspend.

Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Stephan Diestelhorst <stephan.diestelhorst@amd.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 14 +++++++++++++-
 drivers/ata/libata-eh.c   |  4 ++++
 include/linux/libata.h    |  1 +
 3 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c035b3d041ee..932eaee50245 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5418,6 +5418,7 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
  */
 int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 {
+	unsigned int ehi_flags = ATA_EHI_QUIET;
 	int rc;
 
 	/*
@@ -5426,7 +5427,18 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 	 */
 	ata_lpm_enable(host);
 
-	rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
+	/*
+	 * On some hardware, device fails to respond after spun down
+	 * for suspend.  As the device won't be used before being
+	 * resumed, we don't need to touch the device.  Ask EH to skip
+	 * the usual stuff and proceed directly to suspend.
+	 *
+	 * http://thread.gmane.org/gmane.linux.ide/46764
+	 */
+	if (mesg.event == PM_EVENT_SUSPEND)
+		ehi_flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_NO_RECOVERY;
+
+	rc = ata_host_request_pm(host, mesg, 0, ehi_flags, 1);
 	if (rc == 0)
 		host->dev->power.power_state = mesg;
 	return rc;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c9ae299b8342..e48302eae55f 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3235,6 +3235,10 @@ static int ata_eh_skip_recovery(struct ata_link *link)
 	if (link->flags & ATA_LFLAG_DISABLED)
 		return 1;
 
+	/* skip if explicitly requested */
+	if (ehc->i.flags & ATA_EHI_NO_RECOVERY)
+		return 1;
+
 	/* thaw frozen port and recover failed devices */
 	if ((ap->pflags & ATA_PFLAG_FROZEN) || ata_link_nr_enabled(link))
 		return 0;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f010f18a0f86..7de282d8bedf 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -335,6 +335,7 @@ enum {
 	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
 	ATA_EHI_NO_AUTOPSY	= (1 << 2),  /* no autopsy */
 	ATA_EHI_QUIET		= (1 << 3),  /* be quiet */
+	ATA_EHI_NO_RECOVERY	= (1 << 4),  /* no recovery */
 
 	ATA_EHI_DID_SOFTRESET	= (1 << 16), /* already soft-reset this port */
 	ATA_EHI_DID_HARDRESET	= (1 << 17), /* already soft-reset this port */

From ea3c64506ea7965f86f030155e6fdef381de10e2 Mon Sep 17 00:00:00 2001
From: Gwendal Grignou <gwendal@google.com>
Date: Tue, 31 Aug 2010 16:20:36 -0700
Subject: [PATCH 259/728] libata-sff: Reenable Port Multiplier after libata-sff
 remodeling.

Keep track of the link on the which the current request is in progress.
It allows support of links behind port multiplier.

Not all libata-sff is PMP compliant. Code for native BMDMA controller
does not take in accound PMP.

Tested on Marvell 7042 and Sil7526.

Signed-off-by: Gwendal Grignou <gwendal@google.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-sff.c | 38 ++++++++++++++++++++++++++++----------
 drivers/ata/sata_mv.c    |  2 +-
 include/linux/libata.h   |  3 ++-
 3 files changed, 31 insertions(+), 12 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index dee3c2c52562..e30c537cce32 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1045,7 +1045,8 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq)
 int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
 		     u8 status, int in_wq)
 {
-	struct ata_eh_info *ehi = &ap->link.eh_info;
+	struct ata_link *link = qc->dev->link;
+	struct ata_eh_info *ehi = &link->eh_info;
 	unsigned long flags = 0;
 	int poll_next;
 
@@ -1301,8 +1302,14 @@ fsm_start:
 }
 EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
 
-void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay)
+void ata_sff_queue_pio_task(struct ata_link *link, unsigned long delay)
 {
+	struct ata_port *ap = link->ap;
+
+	WARN_ON((ap->sff_pio_task_link != NULL) &&
+		(ap->sff_pio_task_link != link));
+	ap->sff_pio_task_link = link;
+
 	/* may fail if ata_sff_flush_pio_task() in progress */
 	queue_delayed_work(ata_sff_wq, &ap->sff_pio_task,
 			   msecs_to_jiffies(delay));
@@ -1324,14 +1331,18 @@ static void ata_sff_pio_task(struct work_struct *work)
 {
 	struct ata_port *ap =
 		container_of(work, struct ata_port, sff_pio_task.work);
+	struct ata_link *link = ap->sff_pio_task_link;
 	struct ata_queued_cmd *qc;
 	u8 status;
 	int poll_next;
 
+	BUG_ON(ap->sff_pio_task_link == NULL); 
 	/* qc can be NULL if timeout occurred */
-	qc = ata_qc_from_tag(ap, ap->link.active_tag);
-	if (!qc)
+	qc = ata_qc_from_tag(ap, link->active_tag);
+	if (!qc) {
+		ap->sff_pio_task_link = NULL;
 		return;
+	}
 
 fsm_start:
 	WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE);
@@ -1348,11 +1359,16 @@ fsm_start:
 		msleep(2);
 		status = ata_sff_busy_wait(ap, ATA_BUSY, 10);
 		if (status & ATA_BUSY) {
-			ata_sff_queue_pio_task(ap, ATA_SHORT_PAUSE);
+			ata_sff_queue_pio_task(link, ATA_SHORT_PAUSE);
 			return;
 		}
 	}
 
+	/*
+	 * hsm_move() may trigger another command to be processed.
+	 * clean the link beforehand.
+	 */
+	ap->sff_pio_task_link = NULL;
 	/* move the HSM */
 	poll_next = ata_sff_hsm_move(ap, qc, status, 1);
 
@@ -1379,6 +1395,7 @@ fsm_start:
 unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
+	struct ata_link *link = qc->dev->link;
 
 	/* Use polling pio if the LLD doesn't handle
 	 * interrupt driven pio and atapi CDB interrupt.
@@ -1399,7 +1416,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 		ap->hsm_task_state = HSM_ST_LAST;
 
 		if (qc->tf.flags & ATA_TFLAG_POLLING)
-			ata_sff_queue_pio_task(ap, 0);
+			ata_sff_queue_pio_task(link, 0);
 
 		break;
 
@@ -1412,7 +1429,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 		if (qc->tf.flags & ATA_TFLAG_WRITE) {
 			/* PIO data out protocol */
 			ap->hsm_task_state = HSM_ST_FIRST;
-			ata_sff_queue_pio_task(ap, 0);
+			ata_sff_queue_pio_task(link, 0);
 
 			/* always send first data block using the
 			 * ata_sff_pio_task() codepath.
@@ -1422,7 +1439,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 			ap->hsm_task_state = HSM_ST;
 
 			if (qc->tf.flags & ATA_TFLAG_POLLING)
-				ata_sff_queue_pio_task(ap, 0);
+				ata_sff_queue_pio_task(link, 0);
 
 			/* if polling, ata_sff_pio_task() handles the
 			 * rest.  otherwise, interrupt handler takes
@@ -1444,7 +1461,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 		/* send cdb by polling if no cdb interrupt */
 		if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) ||
 		    (qc->tf.flags & ATA_TFLAG_POLLING))
-			ata_sff_queue_pio_task(ap, 0);
+			ata_sff_queue_pio_task(link, 0);
 		break;
 
 	default:
@@ -2737,6 +2754,7 @@ EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep);
 unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
+	struct ata_link *link = qc->dev->link;
 
 	/* defer PIO handling to sff_qc_issue */
 	if (!ata_is_dma(qc->tf.protocol))
@@ -2765,7 +2783,7 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
 
 		/* send cdb by polling if no cdb interrupt */
 		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			ata_sff_queue_pio_task(ap, 0);
+			ata_sff_queue_pio_task(link, 0);
 		break;
 
 	default:
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 81982594a014..a9fd9709c262 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2284,7 +2284,7 @@ static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc)
 	}
 
 	if (qc->tf.flags & ATA_TFLAG_POLLING)
-		ata_sff_queue_pio_task(ap, 0);
+		ata_sff_queue_pio_task(link, 0);
 	return 0;
 }
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 7de282d8bedf..45fb2967b66d 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -724,6 +724,7 @@ struct ata_port {
 	struct ata_ioports	ioaddr;	/* ATA cmd/ctl/dma register blocks */
 	u8			ctl;	/* cache of ATA control register */
 	u8			last_ctl;	/* Cache last written value */
+	struct ata_link*	sff_pio_task_link; /* link currently used */
 	struct delayed_work	sff_pio_task;
 #ifdef CONFIG_ATA_BMDMA
 	struct ata_bmdma_prd	*bmdma_prd;	/* BMDMA SG list */
@@ -1595,7 +1596,7 @@ extern void ata_sff_irq_on(struct ata_port *ap);
 extern void ata_sff_irq_clear(struct ata_port *ap);
 extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
 			    u8 status, int in_wq);
-extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
+extern void ata_sff_queue_pio_task(struct ata_link *link, unsigned long delay);
 extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
 extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
 extern unsigned int ata_sff_port_intr(struct ata_port *ap,

From df09162550fbb53354f0c88e85b5d0e6129ee9cc Mon Sep 17 00:00:00 2001
From: Chris Wright <chrisw@sous-sol.org>
Date: Thu, 9 Sep 2010 16:34:59 -0700
Subject: [PATCH 260/728] tracing: t_start: reset FTRACE_ITER_HASH in case of
 seek/pread

Be sure to avoid entering t_show() with FTRACE_ITER_HASH set without
having properly started the iterator to iterate the hash.  This case is
degenerate and, as discovered by Robert Swiecki, can cause t_hash_show()
to misuse a pointer.  This causes a NULL ptr deref with possible security
implications.  Tracked as CVE-2010-3079.

Cc: Robert Swiecki <swiecki@google.com>
Cc: Eugene Teo <eugene@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 kernel/trace/ftrace.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 83a16e9ee518..fa7ece649fe1 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1510,6 +1510,8 @@ static void *t_start(struct seq_file *m, loff_t *pos)
 		if (*pos > 0)
 			return t_hash_start(m, pos);
 		iter->flags |= FTRACE_ITER_PRINTALL;
+		/* reset in case of seek/pread */
+		iter->flags &= ~FTRACE_ITER_HASH;
 		return iter;
 	}
 

From be14eb619108fa8b7120eb2c42d66d5f623ae10e Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 10 Sep 2010 09:03:21 +0200
Subject: [PATCH 261/728] block: Range check cpu in blk_cpu_to_group

While testing CPU DLPAR, the following problem was discovered.
We were DLPAR removing the first CPU, which in this case was
logical CPUs 0-3. CPUs 0-2 were already marked offline and
we were in the process of offlining CPU 3. After marking
the CPU inactive and offline in cpu_disable, but before the
cpu was completely idle (cpu_die), we ended up in __make_request
on CPU 3. There we looked at the topology map to see which CPU
to complete the I/O on and found no CPUs in the cpu_sibling_map.
This resulted in the block layer setting the completion cpu
to be NR_CPUS, which then caused an oops when we tried to
complete the I/O.

Fix this by sanity checking the value we return from blk_cpu_to_group
to be a valid cpu value.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk.h | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/block/blk.h b/block/blk.h
index 6e7dc87141e4..d6b911ac002c 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -142,14 +142,18 @@ static inline int queue_congestion_off_threshold(struct request_queue *q)
 
 static inline int blk_cpu_to_group(int cpu)
 {
+	int group = NR_CPUS;
 #ifdef CONFIG_SCHED_MC
 	const struct cpumask *mask = cpu_coregroup_mask(cpu);
-	return cpumask_first(mask);
+	group = cpumask_first(mask);
 #elif defined(CONFIG_SCHED_SMT)
-	return cpumask_first(topology_thread_cpumask(cpu));
+	group = cpumask_first(topology_thread_cpumask(cpu));
 #else
 	return cpu;
 #endif
+	if (likely(group < NR_CPUS))
+		return group;
+	return cpu;
 }
 
 /*

From 1879c45cce6411fe97b0b65ccad38f5206700dda Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 10 Sep 2010 11:38:43 +0200
Subject: [PATCH 262/728] AT91: dm9000 initialization update

Add information in dm9000 mac/phy chip initialization:
- irq resource details
- platform data details

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/board-sam9261ek.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index c4c8865d52d7..b4307aba523d 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -93,11 +93,12 @@ static struct resource dm9000_resource[] = {
 		.start	= AT91_PIN_PC11,
 		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
+			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
 };
 
 static struct dm9000_plat_data dm9000_platdata = {
-	.flags		= DM9000_PLATF_16BITONLY,
+	.flags		= DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
 };
 
 static struct platform_device dm9000_device = {

From 64d72bbeeb68b536a27319471f212d413f58bf6f Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 10 Sep 2010 11:26:42 +0200
Subject: [PATCH 263/728] AT91: at91sam9261ek board: remove warnings related to
 use of SPI or SD/MMC

The sd/mmc data structure is not used if SPI is selected. The configuration
of PIO on the board prevent from using both interfaces at the same time
(board dependent).
Remove the warnings at compilation time adding a preprocessor condition.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/board-sam9261ek.c | 30 ++++++++++++++++++----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b4307aba523d..19d4d2cbc9c4 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -168,17 +168,6 @@ static struct at91_udc_data __initdata ek_udc_data = {
 };
 
 
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata ek_mmc_data = {
-	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
-};
-
-
 /*
  * NAND flash
  */
@@ -247,6 +236,10 @@ static void __init ek_add_device_nand(void)
 	at91_add_device_nand(&ek_nand_data);
 }
 
+/*
+ * SPI related devices
+ */
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 
 /*
  * ADS7846 Touchscreen
@@ -357,6 +350,21 @@ static struct spi_board_info ek_spi_devices[] = {
 #endif
 };
 
+#else /* CONFIG_SPI_ATMEL_* */
+
+/*
+ * MCI (SD/MMC)
+ * spi0 and mmc/sd share the same PIO pins: cannot be used at the same time
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+//	.det_pin	= ... not connected
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+#endif /* CONFIG_SPI_ATMEL_* */
+
 
 /*
  * LCD Controller

From 4deb22a6001eb0d4058295c3645c36190a0ec603 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 10 Sep 2010 14:36:06 +0200
Subject: [PATCH 264/728] AT91: at91sam9261ek: remove C99 comments but keep
 information

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/board-sam9261ek.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 19d4d2cbc9c4..65eb0943194f 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -351,16 +351,14 @@ static struct spi_board_info ek_spi_devices[] = {
 };
 
 #else /* CONFIG_SPI_ATMEL_* */
+/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
 
 /*
  * MCI (SD/MMC)
- * spi0 and mmc/sd share the same PIO pins: cannot be used at the same time
+ * det_pin, wp_pin and vcc_pin are not connected
  */
 static struct at91_mmc_data __initdata ek_mmc_data = {
 	.wire4		= 1,
-//	.det_pin	= ... not connected
-//	.wp_pin		= ... not connected
-//	.vcc_pin	= ... not connected
 };
 
 #endif /* CONFIG_SPI_ATMEL_* */

From a122eb2fdfd78b58c6dd992d6f4b1aaef667eef9 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Date: Mon, 6 Sep 2010 18:24:57 -0400
Subject: [PATCH 265/728] xfs: prevent reading uninitialized stack memory

The XFS_IOC_FSGETXATTR ioctl allows unprivileged users to read 12
bytes of uninitialized stack memory, because the fsxattr struct
declared on the stack in xfs_ioc_fsgetxattr() does not alter (or zero)
the 12-byte fsx_pad member before copying it back to the user.  This
patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_ioctl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 4fec427b83ef..3b9e626f7cd1 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -785,6 +785,8 @@ xfs_ioc_fsgetxattr(
 {
 	struct fsxattr		fa;
 
+	memset(&fa, 0, sizeof(struct fsxattr));
+
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 	fa.fsx_xflags = xfs_ip2xflags(ip);
 	fa.fsx_extsize = ip->i_d.di_extsize << ip->i_mount->m_sb.sb_blocklog;

From dd8849c8f59ec1cee4809a0c5e603e045abe860e Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu, 9 Sep 2010 11:58:02 -0700
Subject: [PATCH 266/728] drm/i915: don't enable self-refresh on Ironlake

We don't know how to enable it safely, especially as outputs turn on and
off.  When disabling LP1 we also need to make sure LP2 and 3 are already
disabled.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29173
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29082
Reported-by: Chris Lord <chris@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@kernel.org
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_reg.h      | 8 ++++++++
 drivers/gpu/drm/i915/intel_display.c | 6 ++++--
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d094e9129223..4f5e15577e89 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2206,9 +2206,17 @@
 #define  WM1_LP_SR_EN		(1<<31)
 #define  WM1_LP_LATENCY_SHIFT	24
 #define  WM1_LP_LATENCY_MASK	(0x7f<<24)
+#define  WM1_LP_FBC_LP1_MASK	(0xf<<20)
+#define  WM1_LP_FBC_LP1_SHIFT	20
 #define  WM1_LP_SR_MASK		(0x1ff<<8)
 #define  WM1_LP_SR_SHIFT	8
 #define  WM1_LP_CURSOR_MASK	(0x3f)
+#define WM2_LP_ILK		0x4510c
+#define  WM2_LP_EN		(1<<31)
+#define WM3_LP_ILK		0x45110
+#define  WM3_LP_EN		(1<<31)
+#define WM1S_LP_ILK		0x45120
+#define  WM1S_LP_EN		(1<<31)
 
 /* Memory latency timer register */
 #define MLTR_ILK		0x11222
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 7c9103030036..19daead5b525 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3382,8 +3382,7 @@ static void ironlake_update_wm(struct drm_device *dev,  int planea_clock,
 		reg_value = I915_READ(WM1_LP_ILK);
 		reg_value &= ~(WM1_LP_LATENCY_MASK | WM1_LP_SR_MASK |
 			       WM1_LP_CURSOR_MASK);
-		reg_value |= WM1_LP_SR_EN |
-			     (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
+		reg_value |= (ilk_sr_latency << WM1_LP_LATENCY_SHIFT) |
 			     (sr_wm << WM1_LP_SR_SHIFT) | cursor_wm;
 
 		I915_WRITE(WM1_LP_ILK, reg_value);
@@ -5669,6 +5668,9 @@ void intel_init_clock_gating(struct drm_device *dev)
 			I915_WRITE(DISP_ARB_CTL,
 					(I915_READ(DISP_ARB_CTL) |
 						DISP_FBC_WM_DIS));
+		I915_WRITE(WM3_LP_ILK, 0);
+		I915_WRITE(WM2_LP_ILK, 0);
+		I915_WRITE(WM1_LP_ILK, 0);
 		}
 		/*
 		 * Based on the document from hardware guys the following bits

From 9d1ac65a9698513d00e5608d93fca0c53f536c14 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 10 Sep 2010 09:59:46 +0100
Subject: [PATCH 267/728] KEYS: Fix RCU no-lock warning in
 keyctl_session_to_parent()

There's an protected access to the parent process's credentials in the middle
of keyctl_session_to_parent().  This results in the following RCU warning:

  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  security/keys/keyctl.c:1291 invoked rcu_dereference_check() without protection!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  1 lock held by keyctl-session-/2137:
   #0:  (tasklist_lock){.+.+..}, at: [<ffffffff811ae2ec>] keyctl_session_to_parent+0x60/0x236

  stack backtrace:
  Pid: 2137, comm: keyctl-session- Not tainted 2.6.36-rc2-cachefs+ #1
  Call Trace:
   [<ffffffff8105606a>] lockdep_rcu_dereference+0xaa/0xb3
   [<ffffffff811ae379>] keyctl_session_to_parent+0xed/0x236
   [<ffffffff811af77e>] sys_keyctl+0xb4/0xb6
   [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b

The code should take the RCU read lock to make sure the parents credentials
don't go away, even though it's holding a spinlock and has IRQ disabled.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/keys/keyctl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index b2b0998d6abd..3868c6700b58 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1272,6 +1272,7 @@ long keyctl_session_to_parent(void)
 	keyring_r = NULL;
 
 	me = current;
+	rcu_read_lock();
 	write_lock_irq(&tasklist_lock);
 
 	parent = me->real_parent;
@@ -1319,6 +1320,7 @@ long keyctl_session_to_parent(void)
 	set_ti_thread_flag(task_thread_info(parent), TIF_NOTIFY_RESUME);
 
 	write_unlock_irq(&tasklist_lock);
+	rcu_read_unlock();
 	if (oldcred)
 		put_cred(oldcred);
 	return 0;
@@ -1327,6 +1329,7 @@ already_same:
 	ret = 0;
 not_permitted:
 	write_unlock_irq(&tasklist_lock);
+	rcu_read_unlock();
 	put_cred(cred);
 	return ret;
 

From 3d96406c7da1ed5811ea52a3b0905f4f0e295376 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 10 Sep 2010 09:59:51 +0100
Subject: [PATCH 268/728] KEYS: Fix bug in keyctl_session_to_parent() if parent
 has no session keyring

Fix a bug in keyctl_session_to_parent() whereby it tries to check the ownership
of the parent process's session keyring whether or not the parent has a session
keyring [CVE-2010-2960].

This results in the following oops:

  BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
  IP: [<ffffffff811ae4dd>] keyctl_session_to_parent+0x251/0x443
  ...
  Call Trace:
   [<ffffffff811ae2f3>] ? keyctl_session_to_parent+0x67/0x443
   [<ffffffff8109d286>] ? __do_fault+0x24b/0x3d0
   [<ffffffff811af98c>] sys_keyctl+0xb4/0xb8
   [<ffffffff81001eab>] system_call_fastpath+0x16/0x1b

if the parent process has no session keyring.

If the system is using pam_keyinit then it mostly protected against this as all
processes derived from a login will have inherited the session keyring created
by pam_keyinit during the log in procedure.

To test this, pam_keyinit calls need to be commented out in /etc/pam.d/.

Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/keys/keyctl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 3868c6700b58..60924f6a52db 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1305,7 +1305,8 @@ long keyctl_session_to_parent(void)
 		goto not_permitted;
 
 	/* the keyrings must have the same UID */
-	if (pcred->tgcred->session_keyring->uid != mycred->euid ||
+	if ((pcred->tgcred->session_keyring &&
+	     pcred->tgcred->session_keyring->uid != mycred->euid) ||
 	    mycred->tgcred->session_keyring->uid != mycred->euid)
 		goto not_permitted;
 

From 27c379f7f89a4d558c685b5d89b5ba2fe79ae701 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 10 Sep 2010 13:47:29 +0200
Subject: [PATCH 269/728] generic-ipi: Fix deadlock in
 __smp_call_function_single

Just got my 6 way machine to a state where cpu 0 is in an
endless loop within __smp_call_function_single.
All other cpus are idle.

The call trace on cpu 0 looks like this:

 __smp_call_function_single
 scheduler_tick
 update_process_times
 tick_sched_timer
 __run_hrtimer
 hrtimer_interrupt
 clock_comparator_work
 do_extint
 ext_int_handler
 ----> timer irq
 cpu_idle

__smp_call_function_single() got called from nohz_balancer_kick()
(inlined) with the remote cpu being 1, wait being 0 and the per
cpu variable remote_sched_softirq_cb (call_single_data) of the
current cpu (0).

Then it loops forever when it tries to grab the lock of the
call_single_data, since it is already locked and enqueued on cpu 0.

My theory how this could have happened: for some reason the
scheduler decided to call __smp_call_function_single() on it's own
cpu, and sends an IPI to itself. The interrupt stays pending
since IRQs are disabled. If then the hypervisor schedules the
cpu away it might happen that upon rescheduling both the IPI and
the timer IRQ are pending. If then interrupts are enabled again
it depends which one gets scheduled first.
If the timer interrupt gets delivered first we end up with the
local deadlock as seen in the calltrace above.

Let's make __smp_call_function_single() check if the target cpu is
the current cpu and execute the function immediately just like
smp_call_function_single does. That should prevent at least the
scenario described here.

It might also be that the scheduler is not supposed to call
__smp_call_function_single with the remote cpu being the current
cpu, but that is a different issue.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jens Axboe <jaxboe@fusionio.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <20100910114729.GB2827@osiris.boeblingen.de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/smp.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/kernel/smp.c b/kernel/smp.c
index 75c970c715d3..ed6aacfcb7ef 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -365,9 +365,10 @@ call:
 EXPORT_SYMBOL_GPL(smp_call_function_any);
 
 /**
- * __smp_call_function_single(): Run a function on another CPU
+ * __smp_call_function_single(): Run a function on a specific CPU
  * @cpu: The CPU to run on.
  * @data: Pre-allocated and setup data structure
+ * @wait: If true, wait until function has completed on specified CPU.
  *
  * Like smp_call_function_single(), but allow caller to pass in a
  * pre-allocated data structure. Useful for embedding @data inside
@@ -376,8 +377,10 @@ EXPORT_SYMBOL_GPL(smp_call_function_any);
 void __smp_call_function_single(int cpu, struct call_single_data *data,
 				int wait)
 {
-	csd_lock(data);
+	unsigned int this_cpu;
+	unsigned long flags;
 
+	this_cpu = get_cpu();
 	/*
 	 * Can deadlock when called with interrupts disabled.
 	 * We allow cpu's that are not yet online though, as no one else can
@@ -387,7 +390,15 @@ void __smp_call_function_single(int cpu, struct call_single_data *data,
 	WARN_ON_ONCE(cpu_online(smp_processor_id()) && wait && irqs_disabled()
 		     && !oops_in_progress);
 
-	generic_exec_single(cpu, data, wait);
+	if (cpu == this_cpu) {
+		local_irq_save(flags);
+		data->func(data->info);
+		local_irq_restore(flags);
+	} else {
+		csd_lock(data);
+		generic_exec_single(cpu, data, wait);
+	}
+	put_cpu();
 }
 
 /**

From 1b528181b2ffa14721fb28ad1bd539fe1732c583 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 7 Sep 2010 19:35:49 -0700
Subject: [PATCH 270/728] setup_arg_pages: diagnose excessive argument size

The CONFIG_STACK_GROWSDOWN variant of setup_arg_pages() does not
check the size of the argument/environment area on the stack.
When it is unworkably large, shift_arg_pages() hits its BUG_ON.
This is exploitable with a very large RLIMIT_STACK limit, to
create a crash pretty easily.

Check that the initial stack is not too large to make it possible
to map in any executable.  We're not checking that the actual
executable (or intepreter, for binfmt_elf) will fit.  So those
mappings might clobber part of the initial stack mapping.  But
that is just userland lossage that userland made happen, not a
kernel problem.

Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/exec.c b/fs/exec.c
index 2d9455282744..1b63237fc6dc 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -594,6 +594,11 @@ int setup_arg_pages(struct linux_binprm *bprm,
 #else
 	stack_top = arch_align_stack(stack_top);
 	stack_top = PAGE_ALIGN(stack_top);
+
+	if (unlikely(stack_top < mmap_min_addr) ||
+	    unlikely(vma->vm_end - vma->vm_start >= stack_top - mmap_min_addr))
+		return -ENOMEM;
+
 	stack_shift = vma->vm_end - stack_top;
 
 	bprm->p -= stack_shift;

From 7993bc1f4663c0db67bb8f0d98e6678145b387cd Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 7 Sep 2010 19:36:28 -0700
Subject: [PATCH 271/728] execve: improve interactivity with large arguments

This adds a preemption point during the copying of the argument and
environment strings for execve, in copy_strings().  There is already
a preemption point in the count() loop, so this doesn't add any new
points in the abstract sense.

When the total argument+environment strings are very large, the time
spent copying them can be much more than a normal user time slice.
So this change improves the interactivity of the rest of the system
when one process is doing an execve with very large arguments.

Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/exec.c b/fs/exec.c
index 1b63237fc6dc..6f2d777431a8 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -419,6 +419,8 @@ static int copy_strings(int argc, const char __user *const __user *argv,
 		while (len > 0) {
 			int offset, bytes_to_copy;
 
+			cond_resched();
+
 			offset = pos % PAGE_SIZE;
 			if (offset == 0)
 				offset = PAGE_SIZE;

From 9aea5a65aa7a1af9a4236dfaeb0088f1624f9919 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 7 Sep 2010 19:37:06 -0700
Subject: [PATCH 272/728] execve: make responsive to SIGKILL with large
 arguments

An execve with a very large total of argument/environment strings
can take a really long time in the execve system call.  It runs
uninterruptibly to count and copy all the strings.  This change
makes it abort the exec quickly if sent a SIGKILL.

Note that this is the conservative change, to interrupt only for
SIGKILL, by using fatal_signal_pending().  It would be perfectly
correct semantics to let any signal interrupt the string-copying in
execve, i.e. use signal_pending() instead of fatal_signal_pending().
We'll save that change for later, since it could have user-visible
consequences, such as having a timer set too quickly make it so that
an execve can never complete, though it always happened to work before.

Signed-off-by: Roland McGrath <roland@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/exec.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/fs/exec.c b/fs/exec.c
index 6f2d777431a8..828dd2461d6b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -376,6 +376,9 @@ static int count(const char __user * const __user * argv, int max)
 			argv++;
 			if (i++ >= max)
 				return -E2BIG;
+
+			if (fatal_signal_pending(current))
+				return -ERESTARTNOHAND;
 			cond_resched();
 		}
 	}
@@ -419,6 +422,10 @@ static int copy_strings(int argc, const char __user *const __user *argv,
 		while (len > 0) {
 			int offset, bytes_to_copy;
 
+			if (fatal_signal_pending(current)) {
+				ret = -ERESTARTNOHAND;
+				goto out;
+			}
 			cond_resched();
 
 			offset = pos % PAGE_SIZE;

From 36ac4b987bea9a95217e1af552252f275ca7fc44 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Fri, 10 Sep 2010 10:08:08 -0500
Subject: [PATCH 273/728] x86, UV: Fix initialization of max_pnode

Fix calculation of "max_pnode" for systems where the the highest
blade has neither cpus or memory. (And, yes, although rare this
does occur).

Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20100910150808.GA19802@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/x2apic_uv_x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 7b598b84c902..f744f54cb248 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -698,9 +698,11 @@ void __init uv_system_init(void)
 		for (j = 0; j < 64; j++) {
 			if (!test_bit(j, &present))
 				continue;
-			uv_blade_info[blade].pnode = (i * 64 + j);
+			pnode = (i * 64 + j);
+			uv_blade_info[blade].pnode = pnode;
 			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
+			max_pnode = max(pnode, max_pnode);
 			blade++;
 		}
 	}
@@ -738,7 +740,6 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
 		uv_node_to_blade[nid] = blade;
 		uv_cpu_to_blade[cpu] = blade;
-		max_pnode = max(pnode, max_pnode);
 	}
 
 	/* Add blade/pnode info for nodes without cpus */
@@ -750,7 +751,6 @@ void __init uv_system_init(void)
 		pnode = (paddr >> m_val) & pnode_mask;
 		blade = boot_pnode_to_blade(pnode);
 		uv_node_to_blade[nid] = blade;
-		max_pnode = max(pnode, max_pnode);
 	}
 
 	map_gru_high(max_pnode);

From 51749e47e191db8e588ad5cebea731caf7b705d7 Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Wed, 8 Sep 2010 09:00:22 +0000
Subject: [PATCH 274/728] xfs: log IO completion workqueue is a high priority
 queue

The workqueue implementation in 2.6.36-rcX has changed, resulting
in the workqueues no longer having dedicated threads for work
processing. This has caused severe livelocks under heavy parallel
create workloads because the log IO completions have been getting
held up behind metadata IO completions.  Hence log commits would
stall, memory allocation would stall because pages could not be
cleaned, and lock contention on the AIL during inode IO completion
processing was being seen to slow everything down even further.

By making the log Io completion workqueue a high priority workqueue,
they are queued ahead of all data/metadata IO completions and
processed before the data/metadata completions. Hence the log never
gets stalled, and operations needed to clean memory can continue as
quickly as possible. This avoids the livelock conditions and allos
the system to keep running under heavy load as per normal.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
---
 fs/xfs/linux-2.6/xfs_buf.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index d72cf2bb054a..286e36e21dae 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -1932,7 +1932,8 @@ xfs_buf_init(void)
 	if (!xfs_buf_zone)
 		goto out;
 
-	xfslogd_workqueue = create_workqueue("xfslogd");
+	xfslogd_workqueue = alloc_workqueue("xfslogd",
+					WQ_RESCUER | WQ_HIGHPRI, 1);
 	if (!xfslogd_workqueue)
 		goto out_free_buf_zone;
 

From 5e64b0d9e86ffff8b299556341d85319117539e9 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Tue, 7 Sep 2010 13:30:05 +0800
Subject: [PATCH 275/728] ocfs2/lockdep: Move ip_xattr_sem out of
 ocfs2_xattr_get_nolock.

As the name shows, we shouldn't have any lock in
ocfs2_xattr_get_nolock. so lift ip_xattr_sem to the caller.
This should be safe for us since the only 2 callers are:
1. ocfs2_xattr_get which will lock the resources.
2. ocfs2_mknod which don't need this locking.

And this also resolves the following lockdep warning.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35+ #5
-------------------------------------------------------
reflink/30027 is trying to acquire lock:
 (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]

but task is already holding lock:
 (&oi->ip_xattr_sem){++++..}, at: [<ffffffffa0673b58>] ocfs2_reflink_ioctl+0x68b/0x1226 [ocfs2]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&oi->ip_xattr_sem){++++..}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffff82339650>] down_read+0x34/0x47
       [<ffffffffa0691cb8>] ocfs2_xattr_get_nolock+0xa0/0x4e6 [ocfs2]
       [<ffffffffa069d64f>] ocfs2_get_acl_nolock+0x5c/0x132 [ocfs2]
       [<ffffffffa069d9c7>] ocfs2_init_acl+0x60/0x243 [ocfs2]
       [<ffffffffa066499d>] ocfs2_mknod+0xae8/0xfea [ocfs2]
       [<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
       [<ffffffff820e1c83>] vfs_create+0x9b/0xf4
       [<ffffffff820e20bb>] do_last+0x2fd/0x5be
       [<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
       [<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
       [<ffffffff820d6dac>] sys_open+0x1b/0x1d
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #2 (jbd2_handle){+.+...}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffffa0604ff8>] start_this_handle+0x4a3/0x4bc [jbd2]
       [<ffffffffa06051d6>] jbd2__journal_start+0xba/0xee [jbd2]
       [<ffffffffa0605218>] jbd2_journal_start+0xe/0x10 [jbd2]
       [<ffffffffa065ca34>] ocfs2_start_trans+0xb7/0x19b [ocfs2]
       [<ffffffffa06645f3>] ocfs2_mknod+0x73e/0xfea [ocfs2]
       [<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
       [<ffffffff820e1c83>] vfs_create+0x9b/0xf4
       [<ffffffff820e20bb>] do_last+0x2fd/0x5be
       [<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
       [<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
       [<ffffffff820d6dac>] sys_open+0x1b/0x1d
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #1 (&journal->j_trans_barrier){.+.+..}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82064fa9>] lock_release_non_nested+0x1e5/0x24b
       [<ffffffff82065999>] lock_release+0x158/0x17a
       [<ffffffff823389f6>] __mutex_unlock_slowpath+0xbf/0x11b
       [<ffffffff82338a5b>] mutex_unlock+0x9/0xb
       [<ffffffffa0679673>] ocfs2_free_ac_resource+0x31/0x67 [ocfs2]
       [<ffffffffa067c6bc>] ocfs2_free_alloc_context+0x11/0x1d [ocfs2]
       [<ffffffffa0633de0>] ocfs2_write_begin_nolock+0x141e/0x159b [ocfs2]
       [<ffffffffa0635523>] ocfs2_write_begin+0x11e/0x1e7 [ocfs2]
       [<ffffffff820a1297>] generic_file_buffered_write+0x10c/0x210
       [<ffffffffa0653624>] ocfs2_file_aio_write+0x4cc/0x6d3 [ocfs2]
       [<ffffffff820d822d>] do_sync_write+0xc2/0x106
       [<ffffffff820d897b>] vfs_write+0xae/0x131
       [<ffffffff820d8e55>] sys_write+0x47/0x6f
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #0 (&oi->ip_alloc_sem){+.+.+.}:
       [<ffffffff82063f92>] validate_chain+0x727/0xd68
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffff82339694>] down_write+0x31/0x52
       [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]
       [<ffffffffa06599f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
       [<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
       [<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
       [<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/xattr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c
index d03469f61801..06fa5e77c40e 100644
--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -1286,13 +1286,11 @@ int ocfs2_xattr_get_nolock(struct inode *inode,
 	xis.inode_bh = xbs.inode_bh = di_bh;
 	di = (struct ocfs2_dinode *)di_bh->b_data;
 
-	down_read(&oi->ip_xattr_sem);
 	ret = ocfs2_xattr_ibody_get(inode, name_index, name, buffer,
 				    buffer_size, &xis);
 	if (ret == -ENODATA && di->i_xattr_loc)
 		ret = ocfs2_xattr_block_get(inode, name_index, name, buffer,
 					    buffer_size, &xbs);
-	up_read(&oi->ip_xattr_sem);
 
 	return ret;
 }
@@ -1316,8 +1314,10 @@ static int ocfs2_xattr_get(struct inode *inode,
 		mlog_errno(ret);
 		return ret;
 	}
+	down_read(&OCFS2_I(inode)->ip_xattr_sem);
 	ret = ocfs2_xattr_get_nolock(inode, di_bh, name_index,
 				     name, buffer, buffer_size);
+	up_read(&OCFS2_I(inode)->ip_xattr_sem);
 
 	ocfs2_inode_unlock(inode, 0);
 

From 07eaac9438b13ec0b863111698b91ccec8f3b8d4 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Tue, 7 Sep 2010 13:30:06 +0800
Subject: [PATCH 276/728] ocfs2: Fix lockdep warning in reflink.

This patch change mutex_lock to a new subclass and
add a new inode lock subclass for the target inode
which caused this lockdep warning.

=============================================
[ INFO: possible recursive locking detected ]
2.6.35+ #5
---------------------------------------------
reflink/11086 is trying to acquire lock:
 (Meta){+++++.}, at: [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]

but task is already holding lock:
 (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2]

other info that might help us debug this:
6 locks held by reflink/11086:
 #0:  (&sb->s_type->i_mutex_key#15/1){+.+.+.}, at: [<ffffffff820e09ec>] lookup_create+0x26/0x97
 #1:  (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa06f99a0>] ocfs2_reflink_ioctl+0x4d3/0x1229 [ocfs2]
 #2:  (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2]
 #3:  (&oi->ip_xattr_sem){+.+.+.}, at: [<ffffffffa06f9b58>] ocfs2_reflink_ioctl+0x68b/0x1229 [ocfs2]
 #4:  (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa06f9b67>] ocfs2_reflink_ioctl+0x69a/0x1229 [ocfs2]
 #5:  (&sb->s_type->i_mutex_key#15/2){+.+...}, at: [<ffffffffa06f9d4f>] ocfs2_reflink_ioctl+0x882/0x1229 [ocfs2]

stack backtrace:
Pid: 11086, comm: reflink Not tainted 2.6.35+ #5
Call Trace:
 [<ffffffff82063dd9>] validate_chain+0x56e/0xd68
 [<ffffffff82062275>] ? mark_held_locks+0x49/0x69
 [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
 [<ffffffff82065a81>] lock_acquire+0xc6/0xed
 [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffffa06c9ade>] __ocfs2_cluster_lock+0x975/0xa0d [ocfs2]
 [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffffa06e107b>] ? ocfs2_wait_for_recovery+0x15/0x8a [ocfs2]
 [<ffffffffa06cb6ea>] ocfs2_inode_lock_full_nested+0x1ac/0xdc5 [ocfs2]
 [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffff820623a0>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff82060193>] ? debug_mutex_free_waiter+0x4f/0x53
 [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffffa06ce24a>] ? ocfs2_file_lock_res_init+0x66/0x78 [ocfs2]
 [<ffffffff820bb2d2>] ? might_fault+0x40/0x8d
 [<ffffffffa06df9f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
 [<ffffffff820ee5d3>] ? mntput_no_expire+0x1d/0xb0
 [<ffffffff820e07b3>] ? path_put+0x2c/0x31
 [<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
 [<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
 [<ffffffff8233a7f6>] ? _raw_spin_unlock+0x26/0x2a
 [<ffffffff8200299c>] ? sysret_check+0x27/0x62
 [<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
 [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/dlmglue.h      | 1 +
 fs/ocfs2/refcounttree.c | 5 +++--
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/dlmglue.h b/fs/ocfs2/dlmglue.h
index d1ce48e1b3d6..1d596d8c4a4a 100644
--- a/fs/ocfs2/dlmglue.h
+++ b/fs/ocfs2/dlmglue.h
@@ -84,6 +84,7 @@ enum {
 	OI_LS_PARENT,
 	OI_LS_RENAME1,
 	OI_LS_RENAME2,
+	OI_LS_REFLINK_TARGET,
 };
 
 int ocfs2_dlm_init(struct ocfs2_super *osb);
diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c
index 0afeda83120f..efdd75607406 100644
--- a/fs/ocfs2/refcounttree.c
+++ b/fs/ocfs2/refcounttree.c
@@ -4201,8 +4201,9 @@ static int __ocfs2_reflink(struct dentry *old_dentry,
 		goto out;
 	}
 
-	mutex_lock(&new_inode->i_mutex);
-	ret = ocfs2_inode_lock(new_inode, &new_bh, 1);
+	mutex_lock_nested(&new_inode->i_mutex, I_MUTEX_CHILD);
+	ret = ocfs2_inode_lock_nested(new_inode, &new_bh, 1,
+				      OI_LS_REFLINK_TARGET);
 	if (ret) {
 		mlog_errno(ret);
 		goto out_unlock;

From 0f4da216b8c3c35c90ecd18e1899c6f125957c2b Mon Sep 17 00:00:00 2001
From: Tristan Ye <tristan.ye@oracle.com>
Date: Wed, 8 Sep 2010 17:12:38 +0800
Subject: [PATCH 277/728] Ocfs2: Re-access the journal after
 ocfs2_insert_extent() in dxdir codes.

In ocfs2_dx_dir_rebalance(), we need to rejournal_acess the blocks after
calling ocfs2_insert_extent() since growing an extent tree may trigger
ocfs2_extend_trans(), which makes previous journal_access meaningless.

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/dir.c | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index f04ebcfffc4a..c49f6de0e7ab 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -3931,6 +3931,15 @@ static int ocfs2_dx_dir_rebalance(struct ocfs2_super *osb, struct inode *dir,
 		goto out_commit;
 	}
 
+	cpos = split_hash;
+	ret = ocfs2_dx_dir_new_cluster(dir, &et, cpos, handle,
+				       data_ac, meta_ac, new_dx_leaves,
+				       num_dx_leaves);
+	if (ret) {
+		mlog_errno(ret);
+		goto out_commit;
+	}
+
 	for (i = 0; i < num_dx_leaves; i++) {
 		ret = ocfs2_journal_access_dl(handle, INODE_CACHE(dir),
 					      orig_dx_leaves[i],
@@ -3939,15 +3948,14 @@ static int ocfs2_dx_dir_rebalance(struct ocfs2_super *osb, struct inode *dir,
 			mlog_errno(ret);
 			goto out_commit;
 		}
-	}
 
-	cpos = split_hash;
-	ret = ocfs2_dx_dir_new_cluster(dir, &et, cpos, handle,
-				       data_ac, meta_ac, new_dx_leaves,
-				       num_dx_leaves);
-	if (ret) {
-		mlog_errno(ret);
-		goto out_commit;
+		ret = ocfs2_journal_access_dl(handle, INODE_CACHE(dir),
+					      new_dx_leaves[i],
+					      OCFS2_JOURNAL_ACCESS_WRITE);
+		if (ret) {
+			mlog_errno(ret);
+			goto out_commit;
+		}
 	}
 
 	ocfs2_dx_dir_transfer_leaf(dir, split_hash, handle, tmp_dx_leaf,

From 228ac6357718df2d5c8d70210fa51b2225aab5ee Mon Sep 17 00:00:00 2001
From: Tristan Ye <tristan.ye@oracle.com>
Date: Fri, 10 Sep 2010 10:16:33 +0800
Subject: [PATCH 278/728] Ocfs2: Handle empty list in lockres_seq_start() for
 dlmdebug.c

This patch tries to handle the case in which list 'dlm->tracking_list' is
empty, to avoid accessing an invalid pointer. It fixes the following oops:

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1287

Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/dlm/dlmdebug.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index 5efdd37dfe48..901ca52bf86b 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -636,8 +636,14 @@ static void *lockres_seq_start(struct seq_file *m, loff_t *pos)
 	spin_lock(&dlm->track_lock);
 	if (oldres)
 		track_list = &oldres->tracking;
-	else
+	else {
 		track_list = &dlm->tracking_list;
+		if (list_empty(track_list)) {
+			dl = NULL;
+			spin_unlock(&dlm->track_lock);
+			goto bail;
+		}
+	}
 
 	list_for_each_entry(res, track_list, tracking) {
 		if (&res->tracking == &dlm->tracking_list)
@@ -660,6 +666,7 @@ static void *lockres_seq_start(struct seq_file *m, loff_t *pos)
 	} else
 		dl = NULL;
 
+bail:
 	/* passed to seq_show */
 	return dl;
 }

From 0109c2c48d062a04685638926a35ed20153fedc8 Mon Sep 17 00:00:00 2001
From: mark gross <markgross@thegnar.org>
Date: Thu, 9 Sep 2010 23:20:09 +0200
Subject: [PATCH 279/728] PM QoS: Correct pr_debug() misuse and improve
 parameter checks

Correct some pr_debug() misuse and add a stronger parameter check to
pm_qos_write() for the ASCII hex value case.  Thanks to Dan Carpenter
for pointing out the problem!

Signed-off-by: mark gross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 kernel/pm_qos_params.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index b7e4c362361b..645e541a45f6 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -389,10 +389,12 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
 	} else if (count == 11) { /* len('0x12345678/0') */
 		if (copy_from_user(ascii_value, buf, 11))
 			return -EFAULT;
+		if (strlen(ascii_value) != 10)
+			return -EINVAL;
 		x = sscanf(ascii_value, "%x", &value);
 		if (x != 1)
 			return -EINVAL;
-		pr_debug(KERN_ERR "%s, %d, 0x%x\n", ascii_value, x, value);
+		pr_debug("%s, %d, 0x%x\n", ascii_value, x, value);
 	} else
 		return -EINVAL;
 

From 5ee5e97ee9bca919af11c562beeaf61741ad33f1 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Fri, 10 Sep 2010 22:32:53 +0200
Subject: [PATCH 280/728] x86, tsc: Fix a preemption leak in
 restore_sched_clock_state()

A real life genuine preemption leak..

Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/tsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index d632934cb638..26a863a9c2a8 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -655,7 +655,7 @@ void restore_sched_clock_state(void)
 
 	local_irq_save(flags);
 
-	get_cpu_var(cyc2ns_offset) = 0;
+	__get_cpu_var(cyc2ns_offset) = 0;
 	offset = cyc2ns_suspend - sched_clock();
 
 	for_each_possible_cpu(cpu)

From 55496c896b8a695140045099d4e0175cf09d4eae Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Fri, 10 Sep 2010 22:32:53 +0200
Subject: [PATCH 281/728] x86, tsc: Fix a preemption leak in
 restore_sched_clock_state()

Doh, a real life genuine preemption leak..

This caused a suspend failure.

Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Nico Schottelius <nico-linux-20100709@schottelius.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Pritz <flo@xssn.at>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@kernel.org> # Greg, please apply after: cd7240c ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from")
sleep states
LKML-Reference: <1284150773.402.122.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index d632934cb638..26a863a9c2a8 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -655,7 +655,7 @@ void restore_sched_clock_state(void)
 
 	local_irq_save(flags);
 
-	get_cpu_var(cyc2ns_offset) = 0;
+	__get_cpu_var(cyc2ns_offset) = 0;
 	offset = cyc2ns_suspend - sched_clock();
 
 	for_each_possible_cpu(cpu)

From ca04d9c3ec721e474f00992efc1b1afb625507f5 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 26 Aug 2010 16:12:01 -0700
Subject: [PATCH 282/728] ceph: fix null pointer deref on anon root dentry
 release

When we release a root dentry, particularly after a splice, the parent
(actually our) inode was evaluating to NULL and was getting dereferenced
by ceph_snap().  This is reproduced by something as simple as

 mount -t ceph monhost:/a/b mnt
 mount -t ceph monhost:/a mnt2
 ls mnt2

A splice_dentry() would kill the old 'b' inode's root dentry, and we'd
crash while releasing it.

Fix by checking for both the ROOT and NULL cases explicitly.  We only need
to invalidate the parent dir when we have a correct parent to invalidate.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/dir.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index 6e4f43ff23ec..a1986eb52045 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -1021,11 +1021,15 @@ out_touch:
 static void ceph_dentry_release(struct dentry *dentry)
 {
 	struct ceph_dentry_info *di = ceph_dentry(dentry);
-	struct inode *parent_inode = dentry->d_parent->d_inode;
-	u64 snapid = ceph_snap(parent_inode);
+	struct inode *parent_inode = NULL;
+	u64 snapid = CEPH_NOSNAP;
 
+	if (!IS_ROOT(dentry)) {
+		parent_inode = dentry->d_parent->d_inode;
+		if (parent_inode)
+			snapid = ceph_snap(parent_inode);
+	}
 	dout("dentry_release %p parent %p\n", dentry, parent_inode);
-
 	if (parent_inode && snapid != CEPH_SNAPDIR) {
 		struct ceph_inode_info *ci = ceph_inode(parent_inode);
 

From 3d4401d9d0aef5c40706350685ddea3df6708496 Mon Sep 17 00:00:00 2001
From: Yehuda Sadeh <yehuda@hq.newdream.net>
Date: Fri, 3 Sep 2010 12:57:11 -0700
Subject: [PATCH 283/728] ceph: fix pagelist kunmap tail

A wrong parameter was passed to the kunmap.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/pagelist.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/ceph/pagelist.c b/fs/ceph/pagelist.c
index b6859f47d364..46a368b6dce5 100644
--- a/fs/ceph/pagelist.c
+++ b/fs/ceph/pagelist.c
@@ -5,10 +5,18 @@
 
 #include "pagelist.h"
 
+static void ceph_pagelist_unmap_tail(struct ceph_pagelist *pl)
+{
+	struct page *page = list_entry(pl->head.prev, struct page,
+				       lru);
+	kunmap(page);
+}
+
 int ceph_pagelist_release(struct ceph_pagelist *pl)
 {
 	if (pl->mapped_tail)
-		kunmap(pl->mapped_tail);
+		ceph_pagelist_unmap_tail(pl);
+
 	while (!list_empty(&pl->head)) {
 		struct page *page = list_first_entry(&pl->head, struct page,
 						     lru);
@@ -26,7 +34,7 @@ static int ceph_pagelist_addpage(struct ceph_pagelist *pl)
 	pl->room += PAGE_SIZE;
 	list_add_tail(&page->lru, &pl->head);
 	if (pl->mapped_tail)
-		kunmap(pl->mapped_tail);
+		ceph_pagelist_unmap_tail(pl);
 	pl->mapped_tail = kmap(page);
 	return 0;
 }

From 3612abbd5df6baa9ca3e0777c6c8646e202d3f66 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 7 Sep 2010 15:59:27 -0700
Subject: [PATCH 284/728] ceph: fix reconnect encoding for old servers

Fix the reconnect encoding to encode the cap record when the MDS does not
have the FLOCK capability (i.e., pre v0.22).

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/mds_client.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index f091b1351786..fad95f8f2608 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -2374,6 +2374,8 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap,
 						num_fcntl_locks,
 						num_flock_locks);
 		unlock_kernel();
+	} else {
+		err = ceph_pagelist_append(pagelist, &rec, reclen);
 	}
 
 out_free:

From a77d9f7dce7600058d56f0670ed29d77abffcde2 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Sat, 11 Sep 2010 10:55:25 -0700
Subject: [PATCH 285/728] ceph: fix file offset wrapping at 4GB on 32-bit archs

Cast the value before shifting so that we don't run out of bits with a
32-bit unsigned long.  This fixes wrapping of high file offsets into the
low 4GB of a file on disk, and the subsequent data corruption for large
files.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/addr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 4cfce1ee31fa..50461b8c23a4 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -766,7 +766,8 @@ get_more_pages:
 			/* ok */
 			if (locked_pages == 0) {
 				/* prepare async write request */
-				offset = page->index << PAGE_CACHE_SHIFT;
+				offset = (unsigned long long)page->index
+					<< PAGE_CACHE_SHIFT;
 				len = wsize;
 				req = ceph_osdc_new_request(&client->osdc,
 					    &ci->i_layout,

From 6715045ddc7472a22be5e49d4047d2d89b391f45 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 11 Sep 2010 20:58:27 +0200
Subject: [PATCH 286/728] PM / Hibernate: Avoid hitting OOM during
 preallocation of memory

There is a problem in hibernate_preallocate_memory() that it calls
preallocate_image_memory() with an argument that may be greater than
the total number of available non-highmem memory pages.  If that's
the case, the OOM condition is guaranteed to trigger, which in turn
can cause significant slowdown to occur during hibernation.

To avoid that, make preallocate_image_memory() adjust its argument
before calling preallocate_image_pages(), so that the total number of
saveable non-highem pages left is not less than the minimum size of
a hibernation image.  Change hibernate_preallocate_memory() to try to
allocate from highmem if the number of pages allocated by
preallocate_image_memory() is too low.

Modify free_unnecessary_pages() to take all possible memory
allocation patterns into account.

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: M. Vefa Bicakci <bicave@superonline.com>
---
 kernel/power/snapshot.c | 85 +++++++++++++++++++++++++++++++----------
 1 file changed, 65 insertions(+), 20 deletions(-)

diff --git a/kernel/power/snapshot.c b/kernel/power/snapshot.c
index 5e7edfb05e66..5209b39e6982 100644
--- a/kernel/power/snapshot.c
+++ b/kernel/power/snapshot.c
@@ -1122,9 +1122,19 @@ static unsigned long preallocate_image_pages(unsigned long nr_pages, gfp_t mask)
 	return nr_alloc;
 }
 
-static unsigned long preallocate_image_memory(unsigned long nr_pages)
+static unsigned long preallocate_image_memory(unsigned long nr_pages,
+					      unsigned long avail_normal)
 {
-	return preallocate_image_pages(nr_pages, GFP_IMAGE);
+	unsigned long alloc;
+
+	if (avail_normal <= alloc_normal)
+		return 0;
+
+	alloc = avail_normal - alloc_normal;
+	if (nr_pages < alloc)
+		alloc = nr_pages;
+
+	return preallocate_image_pages(alloc, GFP_IMAGE);
 }
 
 #ifdef CONFIG_HIGHMEM
@@ -1170,15 +1180,22 @@ static inline unsigned long preallocate_highmem_fraction(unsigned long nr_pages,
  */
 static void free_unnecessary_pages(void)
 {
-	unsigned long save_highmem, to_free_normal, to_free_highmem;
+	unsigned long save, to_free_normal, to_free_highmem;
 
-	to_free_normal = alloc_normal - count_data_pages();
-	save_highmem = count_highmem_pages();
-	if (alloc_highmem > save_highmem) {
-		to_free_highmem = alloc_highmem - save_highmem;
+	save = count_data_pages();
+	if (alloc_normal >= save) {
+		to_free_normal = alloc_normal - save;
+		save = 0;
+	} else {
+		to_free_normal = 0;
+		save -= alloc_normal;
+	}
+	save += count_highmem_pages();
+	if (alloc_highmem >= save) {
+		to_free_highmem = alloc_highmem - save;
 	} else {
 		to_free_highmem = 0;
-		to_free_normal -= save_highmem - alloc_highmem;
+		to_free_normal -= save - alloc_highmem;
 	}
 
 	memory_bm_position_reset(&copy_bm);
@@ -1259,7 +1276,7 @@ int hibernate_preallocate_memory(void)
 {
 	struct zone *zone;
 	unsigned long saveable, size, max_size, count, highmem, pages = 0;
-	unsigned long alloc, save_highmem, pages_highmem;
+	unsigned long alloc, save_highmem, pages_highmem, avail_normal;
 	struct timeval start, stop;
 	int error;
 
@@ -1296,6 +1313,7 @@ int hibernate_preallocate_memory(void)
 		else
 			count += zone_page_state(zone, NR_FREE_PAGES);
 	}
+	avail_normal = count;
 	count += highmem;
 	count -= totalreserve_pages;
 
@@ -1310,12 +1328,21 @@ int hibernate_preallocate_memory(void)
 	 */
 	if (size >= saveable) {
 		pages = preallocate_image_highmem(save_highmem);
-		pages += preallocate_image_memory(saveable - pages);
+		pages += preallocate_image_memory(saveable - pages, avail_normal);
 		goto out;
 	}
 
 	/* Estimate the minimum size of the image. */
 	pages = minimum_image_size(saveable);
+	/*
+	 * To avoid excessive pressure on the normal zone, leave room in it to
+	 * accommodate an image of the minimum size (unless it's already too
+	 * small, in which case don't preallocate pages from it at all).
+	 */
+	if (avail_normal > pages)
+		avail_normal -= pages;
+	else
+		avail_normal = 0;
 	if (size < pages)
 		size = min_t(unsigned long, pages, max_size);
 
@@ -1336,16 +1363,34 @@ int hibernate_preallocate_memory(void)
 	 */
 	pages_highmem = preallocate_image_highmem(highmem / 2);
 	alloc = (count - max_size) - pages_highmem;
-	pages = preallocate_image_memory(alloc);
-	if (pages < alloc)
-		goto err_out;
-	size = max_size - size;
-	alloc = size;
-	size = preallocate_highmem_fraction(size, highmem, count);
-	pages_highmem += size;
-	alloc -= size;
-	pages += preallocate_image_memory(alloc);
-	pages += pages_highmem;
+	pages = preallocate_image_memory(alloc, avail_normal);
+	if (pages < alloc) {
+		/* We have exhausted non-highmem pages, try highmem. */
+		alloc -= pages;
+		pages += pages_highmem;
+		pages_highmem = preallocate_image_highmem(alloc);
+		if (pages_highmem < alloc)
+			goto err_out;
+		pages += pages_highmem;
+		/*
+		 * size is the desired number of saveable pages to leave in
+		 * memory, so try to preallocate (all memory - size) pages.
+		 */
+		alloc = (count - pages) - size;
+		pages += preallocate_image_highmem(alloc);
+	} else {
+		/*
+		 * There are approximately max_size saveable pages at this point
+		 * and we want to reduce this number down to size.
+		 */
+		alloc = max_size - size;
+		size = preallocate_highmem_fraction(alloc, highmem, count);
+		pages_highmem += size;
+		alloc -= size;
+		size = preallocate_image_memory(alloc, avail_normal);
+		pages_highmem += preallocate_image_highmem(alloc - size);
+		pages += pages_highmem + size;
+	}
 
 	/*
 	 * We only need as many page frames for the image as there are saveable

From 1f3a66889c4c80c821f3eadf899c140e91452f8e Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Sat, 11 Sep 2010 15:55:12 -0700
Subject: [PATCH 287/728] kernel-doc: ignore case when stripping attributes

There are valid attributes that could have upper case letters, but we
still want to remove, like for example
	__attribute__((aligned(NETDEV_ALIGN)))
as encountered in the wireless code.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/kernel-doc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 102e1235fd5c..a68240c188f3 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1679,7 +1679,7 @@ sub check_sections($$$$$$) {
 		foreach $px (0 .. $#prms) {
 			$prm_clean = $prms[$px];
 			$prm_clean =~ s/\[.*\]//;
-			$prm_clean =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//;
+			$prm_clean =~ s/__attribute__\s*\(\([a-z,_\*\s\(\)]*\)\)//i;
 			# ignore array size in a parameter string;
 			# however, the original param string may contain
 			# spaces, e.g.:  addr[6 + 2]

From eda603f6cdba4b14dbf80531fab2fe545232e7a0 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes.berg@intel.com>
Date: Sat, 11 Sep 2010 15:55:22 -0700
Subject: [PATCH 288/728] docbook: warn on unused doc entries

When you don't use !E or !I but only !F, then it's very easy to miss
including some functions, structs etc.  in documentation.  To help
finding which ones were missed, allow printing out the unused ones as
warnings.

For example, using this on mac80211 yields a lot of warnings like this:

  Warning: didn't use docs for DOC: mac80211 workqueue
  Warning: didn't use docs for ieee80211_max_queues
  Warning: didn't use docs for ieee80211_bss_change
  Warning: didn't use docs for ieee80211_bss_conf

when generating the documentation for it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-doc-nano-HOWTO.txt |   5 +
 scripts/basic/docproc.c                 | 129 +++++++++++++++++++++++-
 scripts/kernel-doc                      |  52 +++++++++-
 3 files changed, 183 insertions(+), 3 deletions(-)

diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 27a52b35d55b..3d8a97747f77 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -345,5 +345,10 @@ documentation, in <filename>, for the functions listed.
 section titled <section title> from <filename>.
 Spaces are allowed in <section title>; do not quote the <section title>.
 
+!C<filename> is replaced by nothing, but makes the tools check that
+all DOC: sections and documented functions, symbols, etc. are used.
+This makes sense to use when you use !F/!P only and want to verify
+that all documentation is included.
+
 Tim.
 */ <twaugh@redhat.com>
diff --git a/scripts/basic/docproc.c b/scripts/basic/docproc.c
index 79ab973fb43a..fc3b18d844af 100644
--- a/scripts/basic/docproc.c
+++ b/scripts/basic/docproc.c
@@ -34,12 +34,14 @@
  *
  */
 
+#define _GNU_SOURCE
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <ctype.h>
 #include <unistd.h>
 #include <limits.h>
+#include <errno.h>
 #include <sys/types.h>
 #include <sys/wait.h>
 
@@ -54,6 +56,7 @@ typedef void FILEONLY(char * file);
 FILEONLY *internalfunctions;
 FILEONLY *externalfunctions;
 FILEONLY *symbolsonly;
+FILEONLY *findall;
 
 typedef void FILELINE(char * file, char * line);
 FILELINE * singlefunctions;
@@ -65,12 +68,30 @@ FILELINE * docsection;
 #define KERNELDOCPATH "scripts/"
 #define KERNELDOC     "kernel-doc"
 #define DOCBOOK       "-docbook"
+#define LIST          "-list"
 #define FUNCTION      "-function"
 #define NOFUNCTION    "-nofunction"
 #define NODOCSECTIONS "-no-doc-sections"
 
 static char *srctree, *kernsrctree;
 
+static char **all_list = NULL;
+static int all_list_len = 0;
+
+static void consume_symbol(const char *sym)
+{
+	int i;
+
+	for (i = 0; i < all_list_len; i++) {
+		if (!all_list[i])
+			continue;
+		if (strcmp(sym, all_list[i]))
+			continue;
+		all_list[i] = NULL;
+		break;
+	}
+}
+
 static void usage (void)
 {
 	fprintf(stderr, "Usage: docproc {doc|depend} file\n");
@@ -248,6 +269,7 @@ static void docfunctions(char * filename, char * type)
 		struct symfile * sym = &symfilelist[i];
 		for (j=0; j < sym->symbolcnt; j++) {
 			vec[idx++]     = type;
+			consume_symbol(sym->symbollist[j].name);
 			vec[idx++] = sym->symbollist[j].name;
 		}
 	}
@@ -287,6 +309,11 @@ static void singfunc(char * filename, char * line)
                         vec[idx++] = &line[i];
                 }
         }
+	for (i = 0; i < idx; i++) {
+        	if (strcmp(vec[i], FUNCTION))
+        		continue;
+		consume_symbol(vec[i + 1]);
+	}
 	vec[idx++] = filename;
 	vec[idx] = NULL;
 	exec_kernel_doc(vec);
@@ -306,6 +333,10 @@ static void docsect(char *filename, char *line)
 		if (*s == '\n')
 			*s = '\0';
 
+	asprintf(&s, "DOC: %s", line);
+	consume_symbol(s);
+	free(s);
+
 	vec[0] = KERNELDOC;
 	vec[1] = DOCBOOK;
 	vec[2] = FUNCTION;
@@ -315,6 +346,84 @@ static void docsect(char *filename, char *line)
 	exec_kernel_doc(vec);
 }
 
+static void find_all_symbols(char *filename)
+{
+	char *vec[4]; /* kerneldoc -list file NULL */
+	pid_t pid;
+	int ret, i, count, start;
+	char real_filename[PATH_MAX + 1];
+	int pipefd[2];
+	char *data, *str;
+	size_t data_len = 0;
+
+	vec[0] = KERNELDOC;
+	vec[1] = LIST;
+	vec[2] = filename;
+	vec[3] = NULL;
+
+	if (pipe(pipefd)) {
+		perror("pipe");
+		exit(1);
+	}
+
+	switch (pid=fork()) {
+		case -1:
+			perror("fork");
+			exit(1);
+		case  0:
+			close(pipefd[0]);
+			dup2(pipefd[1], 1);
+			memset(real_filename, 0, sizeof(real_filename));
+			strncat(real_filename, kernsrctree, PATH_MAX);
+			strncat(real_filename, "/" KERNELDOCPATH KERNELDOC,
+					PATH_MAX - strlen(real_filename));
+			execvp(real_filename, vec);
+			fprintf(stderr, "exec ");
+			perror(real_filename);
+			exit(1);
+		default:
+			close(pipefd[1]);
+			data = malloc(4096);
+			do {
+				while ((ret = read(pipefd[0],
+						   data + data_len,
+						   4096)) > 0) {
+					data_len += ret;
+					data = realloc(data, data_len + 4096);
+				}
+			} while (ret == -EAGAIN);
+			if (ret != 0) {
+				perror("read");
+				exit(1);
+			}
+			waitpid(pid, &ret ,0);
+	}
+	if (WIFEXITED(ret))
+		exitstatus |= WEXITSTATUS(ret);
+	else
+		exitstatus = 0xff;
+
+	count = 0;
+	/* poor man's strtok, but with counting */
+	for (i = 0; i < data_len; i++) {
+		if (data[i] == '\n') {
+			count++;
+			data[i] = '\0';
+		}
+	}
+	start = all_list_len;
+	all_list_len += count;
+	all_list = realloc(all_list, sizeof(char *) * all_list_len);
+	str = data;
+	for (i = 0; i < data_len && start != all_list_len; i++) {
+		if (data[i] == '\0') {
+			all_list[start] = str;
+			str = data + i + 1;
+			start++;
+		}
+	}
+}
+
 /*
  * Parse file, calling action specific functions for:
  * 1) Lines containing !E
@@ -322,7 +431,8 @@ static void docsect(char *filename, char *line)
  * 3) Lines containing !D
  * 4) Lines containing !F
  * 5) Lines containing !P
- * 6) Default lines - lines not matching the above
+ * 6) Lines containing !C
+ * 7) Default lines - lines not matching the above
  */
 static void parse_file(FILE *infile)
 {
@@ -365,6 +475,12 @@ static void parse_file(FILE *infile)
 						s++;
 					docsection(line + 2, s);
 					break;
+				case 'C':
+					while (*s && !isspace(*s)) s++;
+					*s = '\0';
+					if (findall)
+						findall(line+2);
+					break;
 				default:
 					defaultline(line);
 			}
@@ -380,6 +496,7 @@ static void parse_file(FILE *infile)
 int main(int argc, char *argv[])
 {
 	FILE * infile;
+	int i;
 
 	srctree = getenv("SRCTREE");
 	if (!srctree)
@@ -415,6 +532,7 @@ int main(int argc, char *argv[])
 		symbolsonly       = find_export_symbols;
 		singlefunctions   = noaction2;
 		docsection        = noaction2;
+		findall           = find_all_symbols;
 		parse_file(infile);
 
 		/* Rewind to start from beginning of file again */
@@ -425,8 +543,16 @@ int main(int argc, char *argv[])
 		symbolsonly       = printline;
 		singlefunctions   = singfunc;
 		docsection        = docsect;
+		findall           = NULL;
 
 		parse_file(infile);
+
+		for (i = 0; i < all_list_len; i++) {
+			if (!all_list[i])
+				continue;
+			fprintf(stderr, "Warning: didn't use docs for %s\n",
+				all_list[i]);
+		}
 	}
 	else if (strcmp("depend", argv[1]) == 0)
 	{
@@ -439,6 +565,7 @@ int main(int argc, char *argv[])
 		symbolsonly       = adddep;
 		singlefunctions   = adddep2;
 		docsection        = adddep2;
+		findall           = adddep;
 		parse_file(infile);
 		printf("\n");
 	}
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index a68240c188f3..cdb6dc1f6458 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -44,12 +44,13 @@ use strict;
 # Note: This only supports 'c'.
 
 # usage:
-# kernel-doc [ -docbook | -html | -text | -man ] [ -no-doc-sections ]
+# kernel-doc [ -docbook | -html | -text | -man | -list ] [ -no-doc-sections ]
 #           [ -function funcname [ -function funcname ...] ] c file(s)s > outputfile
 # or
 #           [ -nofunction funcname [ -function funcname ...] ] c file(s)s > outputfile
 #
 #  Set output format using one of -docbook -html -text or -man.  Default is man.
+#  The -list format is for internal use by docproc.
 #
 #  -no-doc-sections
 #	Do not output DOC: sections
@@ -210,9 +211,16 @@ my %highlights_text = ( $type_constant, "\$1",
 			$type_param, "\$1" );
 my $blankline_text = "";
 
+# list mode
+my %highlights_list = ( $type_constant, "\$1",
+			$type_func, "\$1",
+			$type_struct, "\$1",
+			$type_param, "\$1" );
+my $blankline_list = "";
 
 sub usage {
-    print "Usage: $0 [ -v ] [ -docbook | -html | -text | -man ] [ -no-doc-sections ]\n";
+    print "Usage: $0 [ -v ] [ -docbook | -html | -text | -man | -list ]\n";
+    print "         [ -no-doc-sections ]\n";
     print "         [ -function funcname [ -function funcname ...] ]\n";
     print "         [ -nofunction funcname [ -nofunction funcname ...] ]\n";
     print "         c source file(s) > outputfile\n";
@@ -318,6 +326,10 @@ while ($ARGV[0] =~ m/^-(.*)/) {
 	$output_mode = "xml";
 	%highlights = %highlights_xml;
 	$blankline = $blankline_xml;
+    } elsif ($cmd eq "-list") {
+	$output_mode = "list";
+	%highlights = %highlights_list;
+	$blankline = $blankline_list;
     } elsif ($cmd eq "-gnome") {
 	$output_mode = "gnome";
 	%highlights = %highlights_gnome;
@@ -1361,6 +1373,42 @@ sub output_blockhead_text(%) {
     }
 }
 
+## list mode output functions
+
+sub output_function_list(%) {
+    my %args = %{$_[0]};
+
+    print $args{'function'} . "\n";
+}
+
+# output enum in list
+sub output_enum_list(%) {
+    my %args = %{$_[0]};
+    print $args{'enum'} . "\n";
+}
+
+# output typedef in list
+sub output_typedef_list(%) {
+    my %args = %{$_[0]};
+    print $args{'typedef'} . "\n";
+}
+
+# output struct as list
+sub output_struct_list(%) {
+    my %args = %{$_[0]};
+
+    print $args{'struct'} . "\n";
+}
+
+sub output_blockhead_list(%) {
+    my %args = %{$_[0]};
+    my ($parameter, $section);
+
+    foreach $section (@{$args{'sectionlist'}}) {
+	print "DOC: $section\n";
+    }
+}
+
 ##
 # generic output function for all types (function, struct/union, typedef, enum);
 # calls the generated, variable output_ function name based on

From 39d709392ffc1d05f825191b07b7d865d434f282 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sat, 11 Sep 2010 15:55:26 -0700
Subject: [PATCH 289/728] docbook: skip files with no docs since they generate
 scary warnings

Fix docbook templates that reference files that do not contain the
expected kernel-doc notation.

Fixes these warnings:

  Warning(arch/x86/include/asm/unaligned.h): no structured comments found
  Warning(lib/vsprintf.c): no structured comments found

These cause errors in the generated html output, like below, so drop
these lines.

  Name
  arch/x86/include/asm/unaligned.h - Document generation inconsistency
  Oops
  Warning
  The template for this document tried to insert the structured comment from the file arch/x86/include/asm/unaligned.h at this point, but none was found. This dummy section is inserted to allow generation to continue.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/DocBook/device-drivers.tmpl | 1 -
 Documentation/DocBook/kernel-api.tmpl     | 1 -
 2 files changed, 2 deletions(-)

diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index ecd35e9d4410..feca0758391e 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -46,7 +46,6 @@
 
      <sect1><title>Atomic and pointer manipulation</title>
 !Iarch/x86/include/asm/atomic.h
-!Iarch/x86/include/asm/unaligned.h
      </sect1>
 
      <sect1><title>Delaying, scheduling, and timer routines</title>
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index a20c6f6fffc3..6899f471fb15 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -57,7 +57,6 @@
      </para>
 
      <sect1><title>String Conversions</title>
-!Ilib/vsprintf.c
 !Elib/vsprintf.c
      </sect1>
      <sect1><title>String Manipulation</title>

From 897493504addc5609f04a2c4f73c37ab972c29b2 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun, 12 Sep 2010 18:25:19 +0100
Subject: [PATCH 290/728] drm/i915: Ensure that the crtcinfo is populated
 during mode_fixup()

This should fix the mysterious mode setting failures reported during
boot up and after resume, generally for i8xx class machines.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16478
Reported-and-tested-by: Xavier Chantry <chantry.xavier@gmail.com>
Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29413
Tested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/intel_display.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 19daead5b525..b5bf51a4502d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2463,11 +2463,19 @@ static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
 				  struct drm_display_mode *adjusted_mode)
 {
 	struct drm_device *dev = crtc->dev;
+
 	if (HAS_PCH_SPLIT(dev)) {
 		/* FDI link clock is fixed at 2.7G */
 		if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
 			return false;
 	}
+
+	/* XXX some encoders set the crtcinfo, others don't.
+	 * Obviously we need some form of conflict resolution here...
+	 */
+	if (adjusted_mode->crtc_htotal == 0)
+		drm_mode_set_crtcinfo(adjusted_mode, 0);
+
 	return true;
 }
 

From 49553c2ef88749dd502687f4eb9c258bb10a4f44 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 12 Sep 2010 16:07:37 -0700
Subject: [PATCH 291/728] Linux 2.6.36-rc4

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 4df9873f83b2..92ab33f16cf0 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

From f2d47d02fd84343a3c5452daca6ed12c75618aff Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Sun, 12 Sep 2010 19:55:25 -0400
Subject: [PATCH 292/728] Fix null dereference in call_allocate

In call_allocate we need to reach the auth in order to factor au_cslack
into the allocation.

As of a17c2153d2e271b0cbacae9bed83b0eaa41db7e1 "SUNRPC: Move the bound
cred to struct rpc_rqst", call_allocate attempts to do this by
dereferencing tk_client->cl_auth, however this is not guaranteed to be
defined--cl_auth can be zero in the case of gss context destruction (see
rpc_free_auth).

Reorder the client state machine to bind credentials before allocating,
so that we can instead reach the auth through the cred.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 net/sunrpc/clnt.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 2388d83b68ff..657aac630fc9 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -931,7 +931,7 @@ call_reserveresult(struct rpc_task *task)
 	task->tk_status = 0;
 	if (status >= 0) {
 		if (task->tk_rqstp) {
-			task->tk_action = call_allocate;
+			task->tk_action = call_refresh;
 			return;
 		}
 
@@ -972,7 +972,7 @@ call_reserveresult(struct rpc_task *task)
 static void
 call_allocate(struct rpc_task *task)
 {
-	unsigned int slack = task->tk_client->cl_auth->au_cslack;
+	unsigned int slack = task->tk_rqstp->rq_cred->cr_auth->au_cslack;
 	struct rpc_rqst *req = task->tk_rqstp;
 	struct rpc_xprt *xprt = task->tk_xprt;
 	struct rpc_procinfo *proc = task->tk_msg.rpc_proc;
@@ -980,7 +980,7 @@ call_allocate(struct rpc_task *task)
 	dprint_status(task);
 
 	task->tk_status = 0;
-	task->tk_action = call_refresh;
+	task->tk_action = call_bind;
 
 	if (req->rq_buffer)
 		return;
@@ -1042,7 +1042,7 @@ call_refreshresult(struct rpc_task *task)
 	dprint_status(task);
 
 	task->tk_status = 0;
-	task->tk_action = call_bind;
+	task->tk_action = call_allocate;
 	if (status >= 0 && rpcauth_uptodatecred(task))
 		return;
 	switch (status) {

From 5a67657a2e90c9e4a48518f95d4ba7777aa20fbb Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sun, 12 Sep 2010 19:55:25 -0400
Subject: [PATCH 293/728] SUNRPC: Fix race corrupting rpc upcall

If rpc_queue_upcall() adds a new upcall to the rpci->pipe list just
after rpc_pipe_release calls rpc_purge_list(), but before it calls
gss_pipe_release (as rpci->ops->release_pipe(inode)), then the latter
will free a message without deleting it from the rpci->pipe list.

We will be left with a freed object on the rpc->pipe list.  Most
frequent symptoms are kernel crashes in rpc.gssd system calls on the
pipe in question.

Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 net/sunrpc/auth_gss/auth_gss.c | 9 +++++----
 net/sunrpc/rpc_pipe.c          | 6 +++---
 2 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c
index dcfc66bab2bb..12c485982814 100644
--- a/net/sunrpc/auth_gss/auth_gss.c
+++ b/net/sunrpc/auth_gss/auth_gss.c
@@ -745,17 +745,18 @@ gss_pipe_release(struct inode *inode)
 	struct rpc_inode *rpci = RPC_I(inode);
 	struct gss_upcall_msg *gss_msg;
 
+restart:
 	spin_lock(&inode->i_lock);
-	while (!list_empty(&rpci->in_downcall)) {
+	list_for_each_entry(gss_msg, &rpci->in_downcall, list) {
 
-		gss_msg = list_entry(rpci->in_downcall.next,
-				struct gss_upcall_msg, list);
+		if (!list_empty(&gss_msg->msg.list))
+			continue;
 		gss_msg->msg.errno = -EPIPE;
 		atomic_inc(&gss_msg->count);
 		__gss_unhash_msg(gss_msg);
 		spin_unlock(&inode->i_lock);
 		gss_release_msg(gss_msg);
-		spin_lock(&inode->i_lock);
+		goto restart;
 	}
 	spin_unlock(&inode->i_lock);
 
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 95ccbcf45d3e..41a762f82630 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -48,7 +48,7 @@ static void rpc_purge_list(struct rpc_inode *rpci, struct list_head *head,
 		return;
 	do {
 		msg = list_entry(head->next, struct rpc_pipe_msg, list);
-		list_del(&msg->list);
+		list_del_init(&msg->list);
 		msg->errno = err;
 		destroy_msg(msg);
 	} while (!list_empty(head));
@@ -208,7 +208,7 @@ rpc_pipe_release(struct inode *inode, struct file *filp)
 	if (msg != NULL) {
 		spin_lock(&inode->i_lock);
 		msg->errno = -EAGAIN;
-		list_del(&msg->list);
+		list_del_init(&msg->list);
 		spin_unlock(&inode->i_lock);
 		rpci->ops->destroy_msg(msg);
 	}
@@ -268,7 +268,7 @@ rpc_pipe_read(struct file *filp, char __user *buf, size_t len, loff_t *offset)
 	if (res < 0 || msg->len == msg->copied) {
 		filp->private_data = NULL;
 		spin_lock(&inode->i_lock);
-		list_del(&msg->list);
+		list_del_init(&msg->list);
 		spin_unlock(&inode->i_lock);
 		rpci->ops->destroy_msg(msg);
 	}

From 006abe887c5e637d059c44310de6c92f36aded3b Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sun, 12 Sep 2010 19:55:25 -0400
Subject: [PATCH 294/728] SUNRPC: Fix a race in rpc_info_open

There is a race between rpc_info_open and rpc_release_client()
in that nothing stops a process from opening the file after
the clnt->cl_kref goes to zero.

Fix this by using atomic_inc_unless_zero()...

Reported-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 include/linux/sunrpc/clnt.h |  2 +-
 net/sunrpc/clnt.c           | 26 ++++++++++++--------------
 net/sunrpc/rpc_pipe.c       | 14 ++++++++------
 3 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index 569dc722a600..85f38a63f098 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -30,7 +30,7 @@ struct rpc_inode;
  * The high-level client handle
  */
 struct rpc_clnt {
-	struct kref		cl_kref;	/* Number of references */
+	atomic_t		cl_count;	/* Number of references */
 	struct list_head	cl_clients;	/* Global list of clients */
 	struct list_head	cl_tasks;	/* List of tasks */
 	spinlock_t		cl_lock;	/* spinlock */
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 657aac630fc9..3a8f53e7ba07 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -226,7 +226,7 @@ static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, stru
 			goto out_no_principal;
 	}
 
-	kref_init(&clnt->cl_kref);
+	atomic_set(&clnt->cl_count, 1);
 
 	err = rpc_setup_pipedir(clnt, program->pipe_dir_name);
 	if (err < 0)
@@ -390,14 +390,14 @@ rpc_clone_client(struct rpc_clnt *clnt)
 		if (new->cl_principal == NULL)
 			goto out_no_principal;
 	}
-	kref_init(&new->cl_kref);
+	atomic_set(&new->cl_count, 1);
 	err = rpc_setup_pipedir(new, clnt->cl_program->pipe_dir_name);
 	if (err != 0)
 		goto out_no_path;
 	if (new->cl_auth)
 		atomic_inc(&new->cl_auth->au_count);
 	xprt_get(clnt->cl_xprt);
-	kref_get(&clnt->cl_kref);
+	atomic_inc(&clnt->cl_count);
 	rpc_register_client(new);
 	rpciod_up();
 	return new;
@@ -465,10 +465,8 @@ EXPORT_SYMBOL_GPL(rpc_shutdown_client);
  * Free an RPC client
  */
 static void
-rpc_free_client(struct kref *kref)
+rpc_free_client(struct rpc_clnt *clnt)
 {
-	struct rpc_clnt *clnt = container_of(kref, struct rpc_clnt, cl_kref);
-
 	dprintk("RPC:       destroying %s client for %s\n",
 			clnt->cl_protname, clnt->cl_server);
 	if (!IS_ERR(clnt->cl_path.dentry)) {
@@ -495,12 +493,10 @@ out_free:
  * Free an RPC client
  */
 static void
-rpc_free_auth(struct kref *kref)
+rpc_free_auth(struct rpc_clnt *clnt)
 {
-	struct rpc_clnt *clnt = container_of(kref, struct rpc_clnt, cl_kref);
-
 	if (clnt->cl_auth == NULL) {
-		rpc_free_client(kref);
+		rpc_free_client(clnt);
 		return;
 	}
 
@@ -509,10 +505,11 @@ rpc_free_auth(struct kref *kref)
 	 *       release remaining GSS contexts. This mechanism ensures
 	 *       that it can do so safely.
 	 */
-	kref_init(kref);
+	atomic_inc(&clnt->cl_count);
 	rpcauth_release(clnt->cl_auth);
 	clnt->cl_auth = NULL;
-	kref_put(kref, rpc_free_client);
+	if (atomic_dec_and_test(&clnt->cl_count))
+		rpc_free_client(clnt);
 }
 
 /*
@@ -525,7 +522,8 @@ rpc_release_client(struct rpc_clnt *clnt)
 
 	if (list_empty(&clnt->cl_tasks))
 		wake_up(&destroy_wait);
-	kref_put(&clnt->cl_kref, rpc_free_auth);
+	if (atomic_dec_and_test(&clnt->cl_count))
+		rpc_free_auth(clnt);
 }
 
 /**
@@ -588,7 +586,7 @@ void rpc_task_set_client(struct rpc_task *task, struct rpc_clnt *clnt)
 	if (clnt != NULL) {
 		rpc_task_release_client(task);
 		task->tk_client = clnt;
-		kref_get(&clnt->cl_kref);
+		atomic_inc(&clnt->cl_count);
 		if (clnt->cl_softrtry)
 			task->tk_flags |= RPC_TASK_SOFT;
 		/* Add to the client's list of all tasks */
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 41a762f82630..8c8eef2b8f26 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -371,21 +371,23 @@ rpc_show_info(struct seq_file *m, void *v)
 static int
 rpc_info_open(struct inode *inode, struct file *file)
 {
-	struct rpc_clnt *clnt;
+	struct rpc_clnt *clnt = NULL;
 	int ret = single_open(file, rpc_show_info, NULL);
 
 	if (!ret) {
 		struct seq_file *m = file->private_data;
-		mutex_lock(&inode->i_mutex);
-		clnt = RPC_I(inode)->private;
-		if (clnt) {
-			kref_get(&clnt->cl_kref);
+
+		spin_lock(&file->f_path.dentry->d_lock);
+		if (!d_unhashed(file->f_path.dentry))
+			clnt = RPC_I(inode)->private;
+		if (clnt != NULL && atomic_inc_not_zero(&clnt->cl_count)) {
+			spin_unlock(&file->f_path.dentry->d_lock);
 			m->private = clnt;
 		} else {
+			spin_unlock(&file->f_path.dentry->d_lock);
 			single_release(inode, file);
 			ret = -EINVAL;
 		}
-		mutex_unlock(&inode->i_mutex);
 	}
 	return ret;
 }

From 55576244eba805307a2b2b6a145b8f85f8c7c124 Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@redhat.com>
Date: Sun, 12 Sep 2010 19:55:25 -0400
Subject: [PATCH 295/728] SUNRPC: cleanup state-machine ordering

This is just a minor cleanup: net/sunrpc/clnt.c clarifies the rpc client
state machine by commenting each state and by laying out the functions
implementing each state in the order that each state is normally
executed (in the absence of errors).

The previous patch "Fix null dereference in call_allocate" changed the
order of the states.  Move the functions and update the comments to
reflect the change.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 net/sunrpc/clnt.c | 84 +++++++++++++++++++++++------------------------
 1 file changed, 42 insertions(+), 42 deletions(-)

diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 3a8f53e7ba07..fa5549079d79 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -964,7 +964,48 @@ call_reserveresult(struct rpc_task *task)
 }
 
 /*
- * 2.	Allocate the buffer. For details, see sched.c:rpc_malloc.
+ * 2.	Bind and/or refresh the credentials
+ */
+static void
+call_refresh(struct rpc_task *task)
+{
+	dprint_status(task);
+
+	task->tk_action = call_refreshresult;
+	task->tk_status = 0;
+	task->tk_client->cl_stats->rpcauthrefresh++;
+	rpcauth_refreshcred(task);
+}
+
+/*
+ * 2a.	Process the results of a credential refresh
+ */
+static void
+call_refreshresult(struct rpc_task *task)
+{
+	int status = task->tk_status;
+
+	dprint_status(task);
+
+	task->tk_status = 0;
+	task->tk_action = call_allocate;
+	if (status >= 0 && rpcauth_uptodatecred(task))
+		return;
+	switch (status) {
+	case -EACCES:
+		rpc_exit(task, -EACCES);
+		return;
+	case -ENOMEM:
+		rpc_exit(task, -ENOMEM);
+		return;
+	case -ETIMEDOUT:
+		rpc_delay(task, 3*HZ);
+	}
+	task->tk_action = call_refresh;
+}
+
+/*
+ * 2b.	Allocate the buffer. For details, see sched.c:rpc_malloc.
  *	(Note: buffer memory is freed in xprt_release).
  */
 static void
@@ -1015,47 +1056,6 @@ call_allocate(struct rpc_task *task)
 	rpc_exit(task, -ERESTARTSYS);
 }
 
-/*
- * 2a.	Bind and/or refresh the credentials
- */
-static void
-call_refresh(struct rpc_task *task)
-{
-	dprint_status(task);
-
-	task->tk_action = call_refreshresult;
-	task->tk_status = 0;
-	task->tk_client->cl_stats->rpcauthrefresh++;
-	rpcauth_refreshcred(task);
-}
-
-/*
- * 2b.	Process the results of a credential refresh
- */
-static void
-call_refreshresult(struct rpc_task *task)
-{
-	int status = task->tk_status;
-
-	dprint_status(task);
-
-	task->tk_status = 0;
-	task->tk_action = call_allocate;
-	if (status >= 0 && rpcauth_uptodatecred(task))
-		return;
-	switch (status) {
-	case -EACCES:
-		rpc_exit(task, -EACCES);
-		return;
-	case -ENOMEM:
-		rpc_exit(task, -ENOMEM);
-		return;
-	case -ETIMEDOUT:
-		rpc_delay(task, 3*HZ);
-	}
-	task->tk_action = call_refresh;
-}
-
 static inline int
 rpc_task_need_encode(struct rpc_task *task)
 {

From b1bde04c6d9a120dec602cc8a70b8a7f21600883 Mon Sep 17 00:00:00 2001
From: Fabio Olive Leite <fleite@redhat.com>
Date: Sun, 12 Sep 2010 19:55:25 -0400
Subject: [PATCH 296/728] Remove incorrect do_vfs_lock message

The do_vfs_lock function on fs/nfs/file.c is only called if NLM is
not being used, via the -onolock mount option. Therefore it cannot
really be "out of sync with lock manager" when the local locking
function called returns an error, as there will be no corresponding
call to the NLM. For details, simply check the if/else on do_setlk
and do_unlk on fs/nfs/file.c.

Signed-Off-By: Fabio Olive Leite <fleite@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/file.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index eb51bd6201da..05bf3c0dc751 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -723,10 +723,6 @@ static int do_vfs_lock(struct file *file, struct file_lock *fl)
 		default:
 			BUG();
 	}
-	if (res < 0)
-		dprintk(KERN_WARNING "%s: VFS is out of sync with lock manager"
-			" - error %d!\n",
-				__func__, res);
 	return res;
 }
 

From ce8477e1176389ed920550f4c925ad4a815b22d5 Mon Sep 17 00:00:00 2001
From: Bian Naimeng <biannm@cn.fujitsu.com>
Date: Sun, 12 Sep 2010 19:55:25 -0400
Subject: [PATCH 297/728] gss:krb5 miss returning error to caller when import
 security context

krb5 miss returning error to up layer when import security context,
it may be return ok though it has failed to import security context.

Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 net/sunrpc/auth_gss/gss_krb5_mech.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/auth_gss/gss_krb5_mech.c b/net/sunrpc/auth_gss/gss_krb5_mech.c
index 032644610524..778e5dfc5144 100644
--- a/net/sunrpc/auth_gss/gss_krb5_mech.c
+++ b/net/sunrpc/auth_gss/gss_krb5_mech.c
@@ -237,6 +237,7 @@ get_key(const void *p, const void *end,
 	if (!supported_gss_krb5_enctype(alg)) {
 		printk(KERN_WARNING "gss_kerberos_mech: unsupported "
 			"encryption key algorithm %d\n", alg);
+		p = ERR_PTR(-EINVAL);
 		goto out_err;
 	}
 	p = simple_get_netobj(p, end, &key);
@@ -282,15 +283,19 @@ gss_import_v1_context(const void *p, const void *end, struct krb5_ctx *ctx)
 	ctx->enctype = ENCTYPE_DES_CBC_RAW;
 
 	ctx->gk5e = get_gss_krb5_enctype(ctx->enctype);
-	if (ctx->gk5e == NULL)
+	if (ctx->gk5e == NULL) {
+		p = ERR_PTR(-EINVAL);
 		goto out_err;
+	}
 
 	/* The downcall format was designed before we completely understood
 	 * the uses of the context fields; so it includes some stuff we
 	 * just give some minimal sanity-checking, and some we ignore
 	 * completely (like the next twenty bytes): */
-	if (unlikely(p + 20 > end || p + 20 < p))
+	if (unlikely(p + 20 > end || p + 20 < p)) {
+		p = ERR_PTR(-EFAULT);
 		goto out_err;
+	}
 	p += 20;
 	p = simple_get_bytes(p, end, &tmp, sizeof(tmp));
 	if (IS_ERR(p))
@@ -619,6 +624,7 @@ gss_import_v2_context(const void *p, const void *end, struct krb5_ctx *ctx,
 	if (ctx->seq_send64 != ctx->seq_send) {
 		dprintk("%s: seq_send64 %lx, seq_send %x overflow?\n", __func__,
 			(long unsigned)ctx->seq_send64, ctx->seq_send);
+		p = ERR_PTR(-EINVAL);
 		goto out_err;
 	}
 	p = simple_get_bytes(p, end, &ctx->enctype, sizeof(ctx->enctype));

From 651b2933b22a0c060e6bb940c4104eb447a61f9a Mon Sep 17 00:00:00 2001
From: Bian Naimeng <biannm@cn.fujitsu.com>
Date: Sun, 12 Sep 2010 19:55:26 -0400
Subject: [PATCH 298/728] gss:spkm3 miss returning error to caller when import
 security context

spkm3 miss returning error to up layer when import security context,
it may be return ok though it has failed to import security context.

Signed-off-by: Bian Naimeng <biannm@cn.fujitsu.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 net/sunrpc/auth_gss/gss_spkm3_mech.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/sunrpc/auth_gss/gss_spkm3_mech.c b/net/sunrpc/auth_gss/gss_spkm3_mech.c
index dc3f1f5ed865..adade3d313f2 100644
--- a/net/sunrpc/auth_gss/gss_spkm3_mech.c
+++ b/net/sunrpc/auth_gss/gss_spkm3_mech.c
@@ -100,6 +100,7 @@ gss_import_sec_context_spkm3(const void *p, size_t len,
 	if (version != 1) {
 		dprintk("RPC:       unknown spkm3 token format: "
 				"obsolete nfs-utils?\n");
+		p = ERR_PTR(-EINVAL);
 		goto out_err_free_ctx;
 	}
 
@@ -135,8 +136,10 @@ gss_import_sec_context_spkm3(const void *p, size_t len,
 	if (IS_ERR(p))
 		goto out_err_free_intg_alg;
 
-	if (p != end)
+	if (p != end) {
+		p = ERR_PTR(-EFAULT);
 		goto out_err_free_intg_key;
+	}
 
 	ctx_id->internal_ctx_id = ctx;
 

From db5fe26541b6b48460104a0d949a27cdc7786957 Mon Sep 17 00:00:00 2001
From: Miquel van Smoorenburg <mikevs@xs4all.net>
Date: Sun, 12 Sep 2010 19:55:26 -0400
Subject: [PATCH 299/728] sunrpc: increase MAX_HASHTABLE_BITS to 14

The maximum size of the authcache is now set to 1024 (10 bits),
but on our server we need at least 4096 (12 bits). Increase
MAX_HASHTABLE_BITS to 14. This is a maximum of 16384 entries,
each containing a pointer (8 bytes on x86_64). This is
exactly the limit of kmalloc() (128K).

Signed-off-by: Miquel van Smoorenburg <mikevs@xs4all.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 net/sunrpc/auth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sunrpc/auth.c b/net/sunrpc/auth.c
index 36cb66022a27..e9eaaf7d43c1 100644
--- a/net/sunrpc/auth.c
+++ b/net/sunrpc/auth.c
@@ -38,7 +38,7 @@ static const struct rpc_authops *auth_flavors[RPC_AUTH_MAXFLAVOR] = {
 static LIST_HEAD(cred_unused);
 static unsigned long number_cred_unused;
 
-#define MAX_HASHTABLE_BITS (10) 
+#define MAX_HASHTABLE_BITS (14)
 static int param_set_hashtbl_sz(const char *val, const struct kernel_param *kp)
 {
 	unsigned long num;

From b20d37ca9561711c6a3c4b859c2855f49565e061 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sun, 12 Sep 2010 19:55:26 -0400
Subject: [PATCH 300/728] NFS: Fix a typo in nfs_sockaddr_match_ipaddr6

Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 fs/nfs/client.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 4e7df2adb212..e7340729af89 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -275,7 +275,7 @@ static int nfs_sockaddr_match_ipaddr6(const struct sockaddr *sa1,
 	    sin1->sin6_scope_id != sin2->sin6_scope_id)
 		return 0;
 
-	return ipv6_addr_equal(&sin1->sin6_addr, &sin1->sin6_addr);
+	return ipv6_addr_equal(&sin1->sin6_addr, &sin2->sin6_addr);
 }
 #else	/* !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE) */
 static int nfs_sockaddr_match_ipaddr6(const struct sockaddr *sa1,

From fbf3fdd2443965d9ba6fb4b5fecd1f6e0847218f Mon Sep 17 00:00:00 2001
From: Menyhart Zoltan <Zoltan.Menyhart@bull.net>
Date: Sun, 12 Sep 2010 19:55:26 -0400
Subject: [PATCH 301/728] statfs() gives ESTALE error

Hi,

An NFS client executes a statfs("file", &buff) call.
"file" exists / existed, the client has read / written it,
but it has already closed it.

user_path(pathname, &path) looks up "file" successfully in the
directory-cache  and restarts the aging timer of the directory-entry.
Even if "file" has already been removed from the server, because the
lookupcache=positive option I use, keeps the entries valid for a while.

nfs_statfs() returns ESTALE if "file" has already been removed from the
server.

If the user application repeats the statfs("file", &buff) call, we
are stuck: "file" remains young forever in the directory-cache.

Signed-off-by: Zoltan Menyhart  <Zoltan.Menyhart@bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
---
 fs/nfs/super.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index ec3966e4706b..f4cbf0c306c6 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -431,7 +431,15 @@ static int nfs_statfs(struct dentry *dentry, struct kstatfs *buf)
 		goto out_err;
 
 	error = server->nfs_client->rpc_ops->statfs(server, fh, &res);
+	if (unlikely(error == -ESTALE)) {
+		struct dentry *pd_dentry;
 
+		pd_dentry = dget_parent(dentry);
+		if (pd_dentry != NULL) {
+			nfs_zap_caches(pd_dentry->d_inode);
+			dput(pd_dentry);
+		}
+	}
 	nfs_free_fattr(res.fattr);
 	if (error < 0)
 		goto out_err;

From 827e3457022d0bb0b1bb8a0eb88501876fe7dcf0 Mon Sep 17 00:00:00 2001
From: Trond Myklebust <Trond.Myklebust@netapp.com>
Date: Sun, 12 Sep 2010 19:57:50 -0400
Subject: [PATCH 302/728] SUNRPC: Fix the NFSv4 and RPCSEC_GSS Kconfig
 dependencies
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The NFSv4 client's callback server calls svc_gss_principal(), which
is defined in the auth_rpcgss.ko

The NFSv4 server has the same dependency, and in addition calls
svcauth_gss_flavor(), gss_mech_get_by_pseudoflavor(),
gss_pseudoflavor_to_service() and gss_mech_put() from the same module.

The module auth_rpcgss itself has no dependencies aside from sunrpc,
so we only need to select RPCSEC_GSS.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
---
 fs/nfs/Kconfig  | 1 +
 fs/nfsd/Kconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
index 6c2aad49d731..f7e13db613cb 100644
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -63,6 +63,7 @@ config NFS_V3_ACL
 config NFS_V4
 	bool "NFS client support for NFS version 4"
 	depends on NFS_FS
+	select SUNRPC_GSS
 	help
 	  This option enables support for version 4 of the NFS protocol
 	  (RFC 3530) in the kernel's NFS client.
diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig
index 95932f523aef..4264377552e2 100644
--- a/fs/nfsd/Kconfig
+++ b/fs/nfsd/Kconfig
@@ -69,6 +69,7 @@ config NFSD_V4
 	depends on NFSD && PROC_FS && EXPERIMENTAL
 	select NFSD_V3
 	select FS_POSIX_ACL
+	select SUNRPC_GSS
 	help
 	  This option enables support in your system's NFS server for
 	  version 4 of the NFS protocol (RFC 3530).

From b343ae51c116dffaef07a8596661774c12212b66 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 12 Sep 2010 17:20:24 -0700
Subject: [PATCH 303/728] sparc64: Support RAW perf events.

Encoding is "(encoding << 16) | pic_mask"

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_event.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 357ced3c33ff..6318e622cfb0 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1038,6 +1038,7 @@ static int __hw_perf_event_init(struct perf_event *event)
 	if (atomic_read(&nmi_active) < 0)
 		return -ENODEV;
 
+	pmap = NULL;
 	if (attr->type == PERF_TYPE_HARDWARE) {
 		if (attr->config >= sparc_pmu->max_events)
 			return -EINVAL;
@@ -1046,9 +1047,18 @@ static int __hw_perf_event_init(struct perf_event *event)
 		pmap = sparc_map_cache_event(attr->config);
 		if (IS_ERR(pmap))
 			return PTR_ERR(pmap);
-	} else
+	} else if (attr->type != PERF_TYPE_RAW)
 		return -EOPNOTSUPP;
 
+	if (pmap) {
+		hwc->event_base = perf_event_encode(pmap);
+	} else {
+		/* User gives us "(encoding << 16) | pic_mask" for
+		 * PERF_TYPE_RAW events.
+		 */
+		hwc->event_base = attr->config;
+	}
+
 	/* We save the enable bits in the config_base.  */
 	hwc->config_base = sparc_pmu->irq_bit;
 	if (!attr->exclude_user)
@@ -1058,8 +1068,6 @@ static int __hw_perf_event_init(struct perf_event *event)
 	if (!attr->exclude_hv)
 		hwc->config_base |= sparc_pmu->hv_bit;
 
-	hwc->event_base = perf_event_encode(pmap);
-
 	n = 0;
 	if (event->group_leader != event) {
 		n = collect_events(event->group_leader,

From cea310e8f8702226f982f09386cfd3c5793c5e2f Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Fri, 10 Sep 2010 16:29:56 -0700
Subject: [PATCH 304/728] ALSA: hda_intel: ALSA HD Audio patch for Intel
 Patsburg DeviceIDs

This patch adds the Intel Patsburg (PCH) HD Audio Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_intel.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 1053fff4bd0a..34940a079051 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -126,6 +126,7 @@ MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
 			 "{Intel, ICH10},"
 			 "{Intel, PCH},"
 			 "{Intel, CPT},"
+			 "{Intel, PBG},"
 			 "{Intel, SCH},"
 			 "{ATI, SB450},"
 			 "{ATI, SB600},"
@@ -2749,6 +2750,8 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
 	{ PCI_DEVICE(0x8086, 0x3b57), .driver_data = AZX_DRIVER_ICH },
 	/* CPT */
 	{ PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH },
+	/* PBG */
+	{ PCI_DEVICE(0x8086, 0x1d20), .driver_data = AZX_DRIVER_PCH },
 	/* SCH */
 	{ PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH },
 	/* ATI SB 450/600 */

From eac15a429a27cb74115daaf4c1127c5e854d50e4 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Sat, 28 Aug 2010 01:45:00 -0400
Subject: [PATCH 305/728] mtd: Blackfin NFC: fix build error after
 nand_scan_ident() change

Seems some patches got out sync when being merged.  The Blackfin NFC
driver was updated to use nand_scan_ident(), but it missed the change
where nand_scan_ident() now takes 3 arguments.  So update this driver
to fix build failures.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/bf5xx_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index a382e3dd0a5d..162c5ea2b773 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -710,7 +710,7 @@ static int bf5xx_nand_scan(struct mtd_info *mtd)
 	struct nand_chip *chip = mtd->priv;
 	int ret;
 
-	ret = nand_scan_ident(mtd, 1);
+	ret = nand_scan_ident(mtd, 1, NULL);
 	if (ret)
 		return ret;
 

From 8b865d5efd9205b131dd9a43a6f450c05d38aaa1 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier@gentoo.org>
Date: Sat, 28 Aug 2010 16:42:04 -0400
Subject: [PATCH 306/728] mtd: Blackfin NFC: fix invalid free in remove()

Since info->mtd isn't dynamically allocated, we shouldn't attempt to
kfree() it.  Otherwise we get random fun corruption when unloading
the driver built as a module.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/bf5xx_nand.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
index 162c5ea2b773..6fbeefa3a766 100644
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -682,7 +682,6 @@ static int __devinit bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
 static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 {
 	struct bf5xx_nand_info *info = to_nand_info(pdev);
-	struct mtd_info *mtd = NULL;
 
 	platform_set_drvdata(pdev, NULL);
 
@@ -690,11 +689,7 @@ static int __devexit bf5xx_nand_remove(struct platform_device *pdev)
 	 * and their partitions, then go through freeing the
 	 * resources used
 	 */
-	mtd = &info->mtd;
-	if (mtd) {
-		nand_release(mtd);
-		kfree(mtd);
-	}
+	nand_release(&info->mtd);
 
 	peripheral_free_list(bfin_nfc_pin_req);
 	bf5xx_nand_dma_remove(info);

From 9aba97ad004ed0cde9747a9daf5b1484edb746cd Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Fri, 27 Aug 2010 11:55:44 +0900
Subject: [PATCH 307/728] mtd: OneNAND: Fix 2KiB pagesize handling at Samsung
 SoCs

Wrong assumption bufferram can be switched between BufferRAM0 and BufferRAM1

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/onenand/samsung.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index cb443af3d45f..094dfcbe2347 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -571,13 +571,12 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
 		unsigned char *buffer, int offset, size_t count)
 {
 	struct onenand_chip *this = mtd->priv;
-	void __iomem *bufferram;
 	void __iomem *p;
 	void *buf = (void *) buffer;
 	dma_addr_t dma_src, dma_dst;
 	int err;
 
-	p = bufferram = this->base + area;
+	p = this->base + area;
 	if (ONENAND_CURRENT_BUFFERRAM(this)) {
 		if (area == ONENAND_DATARAM)
 			p += this->writesize;
@@ -621,7 +620,7 @@ static int s5pc110_read_bufferram(struct mtd_info *mtd, int area,
 normal:
 	if (count != mtd->writesize) {
 		/* Copy the bufferram to memory to prevent unaligned access */
-		memcpy(this->page_buf, bufferram, mtd->writesize);
+		memcpy(this->page_buf, p, mtd->writesize);
 		p = this->page_buf + offset;
 	}
 

From 53d1e137d5ddd8a1c5ec54c5375cb2832e1cbcd1 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Fri, 27 Aug 2010 11:55:37 +0900
Subject: [PATCH 308/728] mtd: OneNAND: Fix loop hang when DMA error at Samsung
 SoCs

When DMA error occurs. it's loop hang since it can't exit the loop.
and it's the right DMA handling code as Spec.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/onenand/samsung.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c
index 094dfcbe2347..a460f1b748c2 100644
--- a/drivers/mtd/onenand/samsung.c
+++ b/drivers/mtd/onenand/samsung.c
@@ -554,14 +554,13 @@ static int s5pc110_dma_ops(void *dst, void *src, size_t count, int direction)
 
 	do {
 		status = readl(base + S5PC110_DMA_TRANS_STATUS);
+		if (status & S5PC110_DMA_TRANS_STATUS_TE) {
+			writel(S5PC110_DMA_TRANS_CMD_TEC,
+					base + S5PC110_DMA_TRANS_CMD);
+			return -EIO;
+		}
 	} while (!(status & S5PC110_DMA_TRANS_STATUS_TD));
 
-	if (status & S5PC110_DMA_TRANS_STATUS_TE) {
-		writel(S5PC110_DMA_TRANS_CMD_TEC, base + S5PC110_DMA_TRANS_CMD);
-		writel(S5PC110_DMA_TRANS_CMD_TDC, base + S5PC110_DMA_TRANS_CMD);
-		return -EIO;
-	}
-
 	writel(S5PC110_DMA_TRANS_CMD_TDC, base + S5PC110_DMA_TRANS_CMD);
 
 	return 0;

From b8db2f51dcccbaf4d23ed44cd0c64856c58a16c0 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 9 Aug 2010 15:04:19 +0200
Subject: [PATCH 309/728] mtd: mxc_nand: configure pages per block for v2
 controller

This patch initializes the pages per block field in CONFIG1 for
v2 controllers. It also sets the FP_INT field. This is the last
field not correctly initialized, so we can switch from
read/modify/write the CONFIG1 reg to just write the correct
value.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: John Ogness <john.ogness@linutronix.de>
Tested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/mxc_nand.c | 31 ++++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 26caa01e34a6..b2828e84d243 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -67,7 +67,9 @@
 #define NFC_V1_V2_CONFIG1_BIG		(1 << 5)
 #define NFC_V1_V2_CONFIG1_RST		(1 << 6)
 #define NFC_V1_V2_CONFIG1_CE		(1 << 7)
-#define NFC_V1_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+#define NFC_V2_CONFIG1_ONE_CYCLE	(1 << 8)
+#define NFC_V2_CONFIG1_PPB(x)		(((x) & 0x3) << 9)
+#define NFC_V2_CONFIG1_FP_INT		(1 << 11)
 
 #define NFC_V1_V2_CONFIG2_INT		(1 << 15)
 
@@ -729,27 +731,30 @@ static void preset_v1_v2(struct mtd_info *mtd)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	struct mxc_nand_host *host = nand_chip->priv;
-	uint16_t tmp;
+	uint16_t config1 = 0;
 
-	/* enable interrupt, disable spare enable */
-	tmp = readw(NFC_V1_V2_CONFIG1);
-	tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
-	tmp &= ~NFC_V1_V2_CONFIG1_SP_EN;
-	if (nand_chip->ecc.mode == NAND_ECC_HW) {
-		tmp |= NFC_V1_V2_CONFIG1_ECC_EN;
-	} else {
-		tmp &= ~NFC_V1_V2_CONFIG1_ECC_EN;
-	}
+	if (nand_chip->ecc.mode == NAND_ECC_HW)
+		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+	if (nfc_is_v21())
+		config1 |= NFC_V2_CONFIG1_FP_INT;
+
+	if (!cpu_is_mx21())
+		config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
 
 	if (nfc_is_v21() && mtd->writesize) {
+		uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
+
 		host->eccsize = get_eccsize(mtd);
 		if (host->eccsize == 4)
-			tmp |= NFC_V2_CONFIG1_ECC_MODE_4;
+			config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+
+		config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
 	} else {
 		host->eccsize = 1;
 	}
 
-	writew(tmp, NFC_V1_V2_CONFIG1);
+	writew(config1, NFC_V1_V2_CONFIG1);
 	/* preset operation */
 
 	/* Unlock the internal RAM Buffer */

From 99d389640b58052884fb231bce9dbffb4f595aa4 Mon Sep 17 00:00:00 2001
From: "Mark F. Brown" <mark.brown314@gmail.com>
Date: Thu, 26 Aug 2010 04:56:51 -0400
Subject: [PATCH 310/728] mtd: pxa3xx: fix build error when
 CONFIG_MTD_PARTITIONS is not defined

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/pxa3xx_nand.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 4d89f3780207..4d01cda68844 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1320,6 +1320,7 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 		goto fail_free_irq;
 	}
 
+#ifdef CONFIG_MTD_PARTITIONS
 	if (mtd_has_cmdlinepart()) {
 		static const char *probes[] = { "cmdlinepart", NULL };
 		struct mtd_partition *parts;
@@ -1332,6 +1333,9 @@ static int pxa3xx_nand_probe(struct platform_device *pdev)
 	}
 
 	return add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts);
+#else
+	return 0;
+#endif
 
 fail_free_irq:
 	free_irq(irq, info);
@@ -1364,7 +1368,9 @@ static int pxa3xx_nand_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	del_mtd_device(mtd);
+#ifdef CONFIG_MTD_PARTITIONS
 	del_mtd_partitions(mtd);
+#endif
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0)
 		free_irq(irq, info);

From c54fce6eff197d9c57c97afbf6c9722ce434fc8f Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 10 Sep 2010 16:51:36 +0200
Subject: [PATCH 311/728] workqueue: add documentation

Update copyright notice and add Documentation/workqueue.txt.

Randy Dunlap, Dave Chinner: misc fixes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-By: Florian Mickler <florian@mickler.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
---
 Documentation/workqueue.txt | 380 ++++++++++++++++++++++++++++++++++++
 include/linux/workqueue.h   |   4 +
 kernel/workqueue.c          |  29 +--
 3 files changed, 402 insertions(+), 11 deletions(-)
 create mode 100644 Documentation/workqueue.txt

diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt
new file mode 100644
index 000000000000..e4498a2872c3
--- /dev/null
+++ b/Documentation/workqueue.txt
@@ -0,0 +1,380 @@
+
+Concurrency Managed Workqueue (cmwq)
+
+September, 2010		Tejun Heo <tj@kernel.org>
+			Florian Mickler <florian@mickler.org>
+
+CONTENTS
+
+1. Introduction
+2. Why cmwq?
+3. The Design
+4. Application Programming Interface (API)
+5. Example Execution Scenarios
+6. Guidelines
+
+
+1. Introduction
+
+There are many cases where an asynchronous process execution context
+is needed and the workqueue (wq) API is the most commonly used
+mechanism for such cases.
+
+When such an asynchronous execution context is needed, a work item
+describing which function to execute is put on a queue.  An
+independent thread serves as the asynchronous execution context.  The
+queue is called workqueue and the thread is called worker.
+
+While there are work items on the workqueue the worker executes the
+functions associated with the work items one after the other.  When
+there is no work item left on the workqueue the worker becomes idle.
+When a new work item gets queued, the worker begins executing again.
+
+
+2. Why cmwq?
+
+In the original wq implementation, a multi threaded (MT) wq had one
+worker thread per CPU and a single threaded (ST) wq had one worker
+thread system-wide.  A single MT wq needed to keep around the same
+number of workers as the number of CPUs.  The kernel grew a lot of MT
+wq users over the years and with the number of CPU cores continuously
+rising, some systems saturated the default 32k PID space just booting
+up.
+
+Although MT wq wasted a lot of resource, the level of concurrency
+provided was unsatisfactory.  The limitation was common to both ST and
+MT wq albeit less severe on MT.  Each wq maintained its own separate
+worker pool.  A MT wq could provide only one execution context per CPU
+while a ST wq one for the whole system.  Work items had to compete for
+those very limited execution contexts leading to various problems
+including proneness to deadlocks around the single execution context.
+
+The tension between the provided level of concurrency and resource
+usage also forced its users to make unnecessary tradeoffs like libata
+choosing to use ST wq for polling PIOs and accepting an unnecessary
+limitation that no two polling PIOs can progress at the same time.  As
+MT wq don't provide much better concurrency, users which require
+higher level of concurrency, like async or fscache, had to implement
+their own thread pool.
+
+Concurrency Managed Workqueue (cmwq) is a reimplementation of wq with
+focus on the following goals.
+
+* Maintain compatibility with the original workqueue API.
+
+* Use per-CPU unified worker pools shared by all wq to provide
+  flexible level of concurrency on demand without wasting a lot of
+  resource.
+
+* Automatically regulate worker pool and level of concurrency so that
+  the API users don't need to worry about such details.
+
+
+3. The Design
+
+In order to ease the asynchronous execution of functions a new
+abstraction, the work item, is introduced.
+
+A work item is a simple struct that holds a pointer to the function
+that is to be executed asynchronously.  Whenever a driver or subsystem
+wants a function to be executed asynchronously it has to set up a work
+item pointing to that function and queue that work item on a
+workqueue.
+
+Special purpose threads, called worker threads, execute the functions
+off of the queue, one after the other.  If no work is queued, the
+worker threads become idle.  These worker threads are managed in so
+called thread-pools.
+
+The cmwq design differentiates between the user-facing workqueues that
+subsystems and drivers queue work items on and the backend mechanism
+which manages thread-pool and processes the queued work items.
+
+The backend is called gcwq.  There is one gcwq for each possible CPU
+and one gcwq to serve work items queued on unbound workqueues.
+
+Subsystems and drivers can create and queue work items through special
+workqueue API functions as they see fit. They can influence some
+aspects of the way the work items are executed by setting flags on the
+workqueue they are putting the work item on. These flags include
+things like CPU locality, reentrancy, concurrency limits and more. To
+get a detailed overview refer to the API description of
+alloc_workqueue() below.
+
+When a work item is queued to a workqueue, the target gcwq is
+determined according to the queue parameters and workqueue attributes
+and appended on the shared worklist of the gcwq.  For example, unless
+specifically overridden, a work item of a bound workqueue will be
+queued on the worklist of exactly that gcwq that is associated to the
+CPU the issuer is running on.
+
+For any worker pool implementation, managing the concurrency level
+(how many execution contexts are active) is an important issue.  cmwq
+tries to keep the concurrency at a minimal but sufficient level.
+Minimal to save resources and sufficient in that the system is used at
+its full capacity.
+
+Each gcwq bound to an actual CPU implements concurrency management by
+hooking into the scheduler.  The gcwq is notified whenever an active
+worker wakes up or sleeps and keeps track of the number of the
+currently runnable workers.  Generally, work items are not expected to
+hog a CPU and consume many cycles.  That means maintaining just enough
+concurrency to prevent work processing from stalling should be
+optimal.  As long as there are one or more runnable workers on the
+CPU, the gcwq doesn't start execution of a new work, but, when the
+last running worker goes to sleep, it immediately schedules a new
+worker so that the CPU doesn't sit idle while there are pending work
+items.  This allows using a minimal number of workers without losing
+execution bandwidth.
+
+Keeping idle workers around doesn't cost other than the memory space
+for kthreads, so cmwq holds onto idle ones for a while before killing
+them.
+
+For an unbound wq, the above concurrency management doesn't apply and
+the gcwq for the pseudo unbound CPU tries to start executing all work
+items as soon as possible.  The responsibility of regulating
+concurrency level is on the users.  There is also a flag to mark a
+bound wq to ignore the concurrency management.  Please refer to the
+API section for details.
+
+Forward progress guarantee relies on that workers can be created when
+more execution contexts are necessary, which in turn is guaranteed
+through the use of rescue workers.  All work items which might be used
+on code paths that handle memory reclaim are required to be queued on
+wq's that have a rescue-worker reserved for execution under memory
+pressure.  Else it is possible that the thread-pool deadlocks waiting
+for execution contexts to free up.
+
+
+4. Application Programming Interface (API)
+
+alloc_workqueue() allocates a wq.  The original create_*workqueue()
+functions are deprecated and scheduled for removal.  alloc_workqueue()
+takes three arguments - @name, @flags and @max_active.  @name is the
+name of the wq and also used as the name of the rescuer thread if
+there is one.
+
+A wq no longer manages execution resources but serves as a domain for
+forward progress guarantee, flush and work item attributes.  @flags
+and @max_active control how work items are assigned execution
+resources, scheduled and executed.
+
+@flags:
+
+  WQ_NON_REENTRANT
+
+	By default, a wq guarantees non-reentrance only on the same
+	CPU.  A work item may not be executed concurrently on the same
+	CPU by multiple workers but is allowed to be executed
+	concurrently on multiple CPUs.  This flag makes sure
+	non-reentrance is enforced across all CPUs.  Work items queued
+	to a non-reentrant wq are guaranteed to be executed by at most
+	one worker system-wide at any given time.
+
+  WQ_UNBOUND
+
+	Work items queued to an unbound wq are served by a special
+	gcwq which hosts workers which are not bound to any specific
+	CPU.  This makes the wq behave as a simple execution context
+	provider without concurrency management.  The unbound gcwq
+	tries to start execution of work items as soon as possible.
+	Unbound wq sacrifices locality but is useful for the following
+	cases.
+
+	* Wide fluctuation in the concurrency level requirement is
+	  expected and using bound wq may end up creating large number
+	  of mostly unused workers across different CPUs as the issuer
+	  hops through different CPUs.
+
+	* Long running CPU intensive workloads which can be better
+	  managed by the system scheduler.
+
+  WQ_FREEZEABLE
+
+	A freezeable wq participates in the freeze phase of the system
+	suspend operations.  Work items on the wq are drained and no
+	new work item starts execution until thawed.
+
+  WQ_RESCUER
+
+	All wq which might be used in the memory reclaim paths _MUST_
+	have this flag set.  This reserves one worker exclusively for
+	the execution of this wq under memory pressure.
+
+  WQ_HIGHPRI
+
+	Work items of a highpri wq are queued at the head of the
+	worklist of the target gcwq and start execution regardless of
+	the current concurrency level.  In other words, highpri work
+	items will always start execution as soon as execution
+	resource is available.
+
+	Ordering among highpri work items is preserved - a highpri
+	work item queued after another highpri work item will start
+	execution after the earlier highpri work item starts.
+
+	Although highpri work items are not held back by other
+	runnable work items, they still contribute to the concurrency
+	level.  Highpri work items in runnable state will prevent
+	non-highpri work items from starting execution.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_CPU_INTENSIVE
+
+	Work items of a CPU intensive wq do not contribute to the
+	concurrency level.  In other words, runnable CPU intensive
+	work items will not prevent other work items from starting
+	execution.  This is useful for bound work items which are
+	expected to hog CPU cycles so that their execution is
+	regulated by the system scheduler.
+
+	Although CPU intensive work items don't contribute to the
+	concurrency level, start of their executions is still
+	regulated by the concurrency management and runnable
+	non-CPU-intensive work items can delay execution of CPU
+	intensive work items.
+
+	This flag is meaningless for unbound wq.
+
+  WQ_HIGHPRI | WQ_CPU_INTENSIVE
+
+	This combination makes the wq avoid interaction with
+	concurrency management completely and behave as a simple
+	per-CPU execution context provider.  Work items queued on a
+	highpri CPU-intensive wq start execution as soon as resources
+	are available and don't affect execution of other work items.
+
+@max_active:
+
+@max_active determines the maximum number of execution contexts per
+CPU which can be assigned to the work items of a wq.  For example,
+with @max_active of 16, at most 16 work items of the wq can be
+executing at the same time per CPU.
+
+Currently, for a bound wq, the maximum limit for @max_active is 512
+and the default value used when 0 is specified is 256.  For an unbound
+wq, the limit is higher of 512 and 4 * num_possible_cpus().  These
+values are chosen sufficiently high such that they are not the
+limiting factor while providing protection in runaway cases.
+
+The number of active work items of a wq is usually regulated by the
+users of the wq, more specifically, by how many work items the users
+may queue at the same time.  Unless there is a specific need for
+throttling the number of active work items, specifying '0' is
+recommended.
+
+Some users depend on the strict execution ordering of ST wq.  The
+combination of @max_active of 1 and WQ_UNBOUND is used to achieve this
+behavior.  Work items on such wq are always queued to the unbound gcwq
+and only one work item can be active at any given time thus achieving
+the same ordering property as ST wq.
+
+
+5. Example Execution Scenarios
+
+The following example execution scenarios try to illustrate how cmwq
+behave under different configurations.
+
+ Work items w0, w1, w2 are queued to a bound wq q0 on the same CPU.
+ w0 burns CPU for 5ms then sleeps for 10ms then burns CPU for 5ms
+ again before finishing.  w1 and w2 burn CPU for 5ms then sleep for
+ 10ms.
+
+Ignoring all other tasks, works and processing overhead, and assuming
+simple FIFO scheduling, the following is one highly simplified version
+of possible sequences of events with the original wq.
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 starts and burns CPU
+ 25		w1 sleeps
+ 35		w1 wakes up and finishes
+ 35		w2 starts and burns CPU
+ 40		w2 sleeps
+ 50		w2 wakes up and finishes
+
+And with cmwq with @max_active >= 3,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 10		w2 starts and burns CPU
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+If @max_active == 2,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 starts and burns CPU
+ 10		w1 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 20		w2 starts and burns CPU
+ 25		w2 sleeps
+ 35		w2 wakes up and finishes
+
+Now, let's assume w1 and w2 are queued to a different wq q1 which has
+WQ_HIGHPRI set,
+
+ TIME IN MSECS	EVENT
+ 0		w1 and w2 start and burn CPU
+ 5		w1 sleeps
+ 10		w2 sleeps
+ 10		w0 starts and burns CPU
+ 15		w0 sleeps
+ 15		w1 wakes up and finishes
+ 20		w2 wakes up and finishes
+ 25		w0 wakes up and burns CPU
+ 30		w0 finishes
+
+If q1 has WQ_CPU_INTENSIVE set,
+
+ TIME IN MSECS	EVENT
+ 0		w0 starts and burns CPU
+ 5		w0 sleeps
+ 5		w1 and w2 start and burn CPU
+ 10		w1 sleeps
+ 15		w2 sleeps
+ 15		w0 wakes up and burns CPU
+ 20		w0 finishes
+ 20		w1 wakes up and finishes
+ 25		w2 wakes up and finishes
+
+
+6. Guidelines
+
+* Do not forget to use WQ_RESCUER if a wq may process work items which
+  are used during memory reclaim.  Each wq with WQ_RESCUER set has one
+  rescuer thread reserved for it.  If there is dependency among
+  multiple work items used during memory reclaim, they should be
+  queued to separate wq each with WQ_RESCUER.
+
+* Unless strict ordering is required, there is no need to use ST wq.
+
+* Unless there is a specific need, using 0 for @max_active is
+  recommended.  In most use cases, concurrency level usually stays
+  well under the default limit.
+
+* A wq serves as a domain for forward progress guarantee (WQ_RESCUER),
+  flush and work item attributes.  Work items which are not involved
+  in memory reclaim and don't need to be flushed as a part of a group
+  of work items, and don't require any special attribute, can use one
+  of the system wq.  There is no difference in execution
+  characteristics between using a dedicated wq and a system wq.
+
+* Unless work items are expected to consume a huge amount of CPU
+  cycles, using a bound wq is usually beneficial due to the increased
+  level of locality in wq operations and work item execution.
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index f11100f96482..25e02c941bac 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -235,6 +235,10 @@ static inline unsigned int work_static(struct work_struct *work) { return 0; }
 #define work_clear_pending(work) \
 	clear_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))
 
+/*
+ * Workqueue flags and constants.  For details, please refer to
+ * Documentation/workqueue.txt.
+ */
 enum {
 	WQ_NON_REENTRANT	= 1 << 0, /* guarantee non-reentrance */
 	WQ_UNBOUND		= 1 << 1, /* not bound to any cpu */
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 727f24e563ae..f77afd939229 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1,19 +1,26 @@
 /*
- * linux/kernel/workqueue.c
+ * kernel/workqueue.c - generic async execution with shared worker pool
  *
- * Generic mechanism for defining kernel helper threads for running
- * arbitrary tasks in process context.
+ * Copyright (C) 2002		Ingo Molnar
  *
- * Started by Ingo Molnar, Copyright (C) 2002
- *
- * Derived from the taskqueue/keventd code by:
- *
- *   David Woodhouse <dwmw2@infradead.org>
- *   Andrew Morton
- *   Kai Petzke <wpp@marie.physik.tu-berlin.de>
- *   Theodore Ts'o <tytso@mit.edu>
+ *   Derived from the taskqueue/keventd code by:
+ *     David Woodhouse <dwmw2@infradead.org>
+ *     Andrew Morton
+ *     Kai Petzke <wpp@marie.physik.tu-berlin.de>
+ *     Theodore Ts'o <tytso@mit.edu>
  *
  * Made to use alloc_percpu by Christoph Lameter.
+ *
+ * Copyright (C) 2010		SUSE Linux Products GmbH
+ * Copyright (C) 2010		Tejun Heo <tj@kernel.org>
+ *
+ * This is the generic async execution mechanism.  Work items as are
+ * executed in process context.  The worker pool is shared and
+ * automatically managed.  There is one worker pool for each CPU and
+ * one extra for works which are better served by workers which are
+ * not bound to any specific CPU.
+ *
+ * Please read Documentation/workqueue.txt for details.
  */
 
 #include <linux/module.h>

From 551402a30efa45560e23c22a7aa04453861602c3 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon, 6 Sep 2010 23:53:47 +0100
Subject: [PATCH 312/728] drm: Fix regression in disable polling e58f637

I broke out my trusty i845 and found a new boot failure, which upon
inspection turned out to be a recursion within:

drm_helper_probe_single_connector_modes() -> drm_helper_hpd_irq_event()
-> intel_crt_detect() -> drm_helper_probe_single_connector_modes()

Calling drm_kms_helper_poll_enable() instead performs the desired
re-initialisation of the polling should the user have toggled the
parameter, without the recursive side-effect.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_crtc_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index d2ab01e90a96..4238a19c36db 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -104,7 +104,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 			connector->funcs->force(connector);
 	} else {
 		connector->status = connector->funcs->detect(connector);
-		drm_helper_hpd_irq_event(dev);
+		drm_kms_helper_poll_enable(dev);
 	}
 
 	if (connector->status == connector_status_disconnected) {

From ff32a59daea4f3eae980ae8d0932b135c633ec5d Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 7 Sep 2010 13:26:39 -0400
Subject: [PATCH 313/728] drm/radeon/kms: fix regression in RMX code (v2)

caused by d65d65b175a29bd7ea2bb69c046419329c4a5db7

need to update the radeon crtc priv native mode before using it.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30049

v2: integrate v/h copy paste typo

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_display.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 6dd434ad2429..8c987c9923ed 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -1140,14 +1140,14 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
 				radeon_crtc->rmx_type = radeon_encoder->rmx_type;
 			else
 				radeon_crtc->rmx_type = RMX_OFF;
-			src_v = crtc->mode.vdisplay;
-			dst_v = radeon_crtc->native_mode.vdisplay;
-			src_h = crtc->mode.hdisplay;
-			dst_h = radeon_crtc->native_mode.vdisplay;
 			/* copy native mode */
 			memcpy(&radeon_crtc->native_mode,
 			       &radeon_encoder->native_mode,
 				sizeof(struct drm_display_mode));
+			src_v = crtc->mode.vdisplay;
+			dst_v = radeon_crtc->native_mode.vdisplay;
+			src_h = crtc->mode.hdisplay;
+			dst_h = radeon_crtc->native_mode.hdisplay;
 
 			/* fix up for overscan on hdmi */
 			if (ASIC_IS_AVIVO(rdev) &&

From aa74fbb4c905c6c746b79d4d7d8c95d8bbd4360c Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 7 Sep 2010 14:41:30 -0400
Subject: [PATCH 314/728] drm/radeon/kms: add connector table for Mac x800

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28671

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_combios.c | 47 +++++++++++++++++++++++++
 drivers/gpu/drm/radeon/radeon_mode.h    |  3 +-
 2 files changed, 49 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index bd74e428bd14..a04b7a6ad95f 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -1485,6 +1485,11 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 			/* PowerMac8,1 ? */
 			/* imac g5 isight */
 			rdev->mode_info.connector_table = CT_IMAC_G5_ISIGHT;
+		} else if ((rdev->pdev->device == 0x4a48) &&
+			   (rdev->pdev->subsystem_vendor == 0x1002) &&
+			   (rdev->pdev->subsystem_device == 0x4a48)) {
+			/* Mac X800 */
+			rdev->mode_info.connector_table = CT_MAC_X800;
 		} else
 #endif /* CONFIG_PPC_PMAC */
 #ifdef CONFIG_PPC64
@@ -1961,6 +1966,48 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev)
 					    CONNECTOR_OBJECT_ID_VGA,
 					    &hpd);
 		break;
+	case CT_MAC_X800:
+		DRM_INFO("Connector Table: %d (mac x800)\n",
+			 rdev->mode_info.connector_table);
+		/* DVI - primary dac, internal tmds */
+		ddc_i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
+		hpd.hpd = RADEON_HPD_1; /* ??? */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								  ATOM_DEVICE_DFP1_SUPPORT,
+								  0),
+					  ATOM_DEVICE_DFP1_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								  ATOM_DEVICE_CRT1_SUPPORT,
+								  1),
+					  ATOM_DEVICE_CRT1_SUPPORT);
+		radeon_add_legacy_connector(dev, 0,
+					    ATOM_DEVICE_DFP1_SUPPORT |
+					    ATOM_DEVICE_CRT1_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I,
+					    &hpd);
+		/* DVI - tv dac, dvo */
+		ddc_i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
+		hpd.hpd = RADEON_HPD_2; /* ??? */
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								  ATOM_DEVICE_DFP2_SUPPORT,
+								  0),
+					  ATOM_DEVICE_DFP2_SUPPORT);
+		radeon_add_legacy_encoder(dev,
+					  radeon_get_encoder_enum(dev,
+								  ATOM_DEVICE_CRT2_SUPPORT,
+								  2),
+					  ATOM_DEVICE_CRT2_SUPPORT);
+		radeon_add_legacy_connector(dev, 1,
+					    ATOM_DEVICE_DFP2_SUPPORT |
+					    ATOM_DEVICE_CRT2_SUPPORT,
+					    DRM_MODE_CONNECTOR_DVII, &ddc_i2c,
+					    CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I,
+					    &hpd);
+		break;
 	default:
 		DRM_INFO("Connector table: %d (invalid)\n",
 			 rdev->mode_info.connector_table);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index efbe975312dc..17a6602b5885 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -204,7 +204,7 @@ struct radeon_i2c_chan {
 
 /* mostly for macs, but really any system without connector tables */
 enum radeon_connector_table {
-	CT_NONE,
+	CT_NONE = 0,
 	CT_GENERIC,
 	CT_IBOOK,
 	CT_POWERBOOK_EXTERNAL,
@@ -215,6 +215,7 @@ enum radeon_connector_table {
 	CT_IMAC_G5_ISIGHT,
 	CT_EMAC,
 	CT_RN50_POWER,
+	CT_MAC_X800,
 };
 
 enum radeon_dvo_chip {

From e6db0da02ea753968d15ae3e835059c207647e78 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Fri, 10 Sep 2010 03:19:05 -0400
Subject: [PATCH 315/728] drm/radeon/kms: don't enable underscan with
 interlaced modes

They aren't compatible.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_display.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 8c987c9923ed..127a395f70fb 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -1151,6 +1151,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
 
 			/* fix up for overscan on hdmi */
 			if (ASIC_IS_AVIVO(rdev) &&
+			    (!(mode->flags & DRM_MODE_FLAG_INTERLACE)) &&
 			    ((radeon_encoder->underscan_type == UNDERSCAN_ON) ||
 			     ((radeon_encoder->underscan_type == UNDERSCAN_AUTO) &&
 			      drm_detect_hdmi_monitor(radeon_connector->edid) &&

From 356ad3cd616185631235ffb48b3efbf39f9923b3 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 9 Sep 2010 09:41:32 +0100
Subject: [PATCH 316/728] drm: Only decouple the old_fb from the crtc is we
 call mode_set*

Otherwise when disabling the output we switch to the new fb (which is
likely NULL) and skip the call to mode_set -- leaking driver private
state on the old_fb.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857
Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_crtc_helper.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index 4238a19c36db..de152a58967d 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -637,13 +637,13 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		mode_changed = true;
 
 	if (mode_changed) {
-		old_fb = set->crtc->fb;
-		set->crtc->fb = set->fb;
 		set->crtc->enabled = (set->mode != NULL);
 		if (set->mode != NULL) {
 			DRM_DEBUG_KMS("attempting to set mode from"
 					" userspace\n");
 			drm_mode_debug_printmodeline(set->mode);
+			old_fb = set->crtc->fb;
+			set->crtc->fb = set->fb;
 			if (!drm_crtc_helper_set_mode(set->crtc, set->mode,
 						      set->x, set->y,
 						      old_fb)) {

From 27849044ca6ff9c52f63271b511282acf6d1c251 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Thu, 9 Sep 2010 11:31:13 -0400
Subject: [PATCH 317/728] drm/radeon: add some missing copyright headers

Noticed while adding evergreen blit support.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600_blit_kms.c     | 25 ++++++++++++++++++++++
 drivers/gpu/drm/radeon/r600_blit_shaders.h | 24 +++++++++++++++++++++
 2 files changed, 49 insertions(+)

diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index d13622ae74e9..9ceb2a1ce799 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -1,3 +1,28 @@
+/*
+ * Copyright 2009 Advanced Micro Devices, Inc.
+ * Copyright 2009 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
+
 #include "drmP.h"
 #include "drm.h"
 #include "radeon_drm.h"
diff --git a/drivers/gpu/drm/radeon/r600_blit_shaders.h b/drivers/gpu/drm/radeon/r600_blit_shaders.h
index fdc3b378cbb0..f437d36dd98c 100644
--- a/drivers/gpu/drm/radeon/r600_blit_shaders.h
+++ b/drivers/gpu/drm/radeon/r600_blit_shaders.h
@@ -1,3 +1,27 @@
+/*
+ * Copyright 2009 Advanced Micro Devices, Inc.
+ * Copyright 2009 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */
 
 #ifndef R600_BLIT_SHADERS_H
 #define R600_BLIT_SHADERS_H

From 7b334fcb45b757ffb093696ca3de1b0c8b4a33f1 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 9 Sep 2010 23:51:02 +0100
Subject: [PATCH 318/728] drm: Use a nondestructive mode for output detect when
 polling
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Destructive load-detection is very expensive and due to failings
elsewhere can trigger system wide stalls of up to 600ms. A simple
first step to correcting this is not to invoke such an expensive
and destructive load-detection operation automatically.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29536
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16265
Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_crtc_helper.c           |  4 ++--
 drivers/gpu/drm/drm_sysfs.c                 |  2 +-
 drivers/gpu/drm/i915/intel_crt.c            |  7 ++++++-
 drivers/gpu/drm/i915/intel_dp.c             |  3 ++-
 drivers/gpu/drm/i915/intel_dvo.c            |  4 +++-
 drivers/gpu/drm/i915/intel_hdmi.c           |  3 ++-
 drivers/gpu/drm/i915/intel_lvds.c           |  8 ++++++--
 drivers/gpu/drm/i915/intel_sdvo.c           |  6 ++++--
 drivers/gpu/drm/i915/intel_tv.c             | 12 ++++++------
 drivers/gpu/drm/nouveau/nouveau_connector.c |  8 +++++---
 drivers/gpu/drm/radeon/radeon_connectors.c  | 20 +++++++++++++++-----
 drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c         |  3 ++-
 include/drm/drm_crtc.h                      |  3 ++-
 13 files changed, 56 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index de152a58967d..fb6b70fc6572 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -103,7 +103,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		if (connector->funcs->force)
 			connector->funcs->force(connector);
 	} else {
-		connector->status = connector->funcs->detect(connector);
+		connector->status = connector->funcs->detect(connector, false);
 		drm_kms_helper_poll_enable(dev);
 	}
 
@@ -866,7 +866,7 @@ static void output_poll_execute(struct work_struct *work)
 		    !(connector->polled & DRM_CONNECTOR_POLL_HPD))
 			continue;
 
-		status = connector->funcs->detect(connector);
+		status = connector->funcs->detect(connector, true);
 		if (old_status != status)
 			changed = true;
 	}
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 86118a742231..85da4c40694c 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -159,7 +159,7 @@ static ssize_t status_show(struct device *device,
 	struct drm_connector *connector = to_drm_connector(device);
 	enum drm_connector_status status;
 
-	status = connector->funcs->detect(connector);
+	status = connector->funcs->detect(connector, true);
 	return snprintf(buf, PAGE_SIZE, "%s\n",
 			drm_get_connector_status_name(status));
 }
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 4b7735196cd5..0350e5d711f8 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -400,7 +400,9 @@ intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder
 	return status;
 }
 
-static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_crt_detect(struct drm_connector *connector,
+		 bool nondestructive)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
@@ -419,6 +421,9 @@ static enum drm_connector_status intel_crt_detect(struct drm_connector *connecto
 	if (intel_crt_detect_ddc(encoder))
 		return connector_status_connected;
 
+	if (nondestructive)
+		return connector->status;
+
 	/* for pre-945g platforms use load detect */
 	if (encoder->crtc && encoder->crtc->enabled) {
 		status = intel_crt_load_detect(encoder->crtc, intel_encoder);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 51d142939a26..e1a2a05fb838 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1386,7 +1386,8 @@ ironlake_dp_detect(struct drm_connector *connector)
  * \return false if DP port is disconnected.
  */
 static enum drm_connector_status
-intel_dp_detect(struct drm_connector *connector)
+intel_dp_detect(struct drm_connector *connector,
+		bool nondestructive)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index a399f4b2c1c5..f0de1addf8a4 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -221,7 +221,9 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
  *
  * Unimplemented.
  */
-static enum drm_connector_status intel_dvo_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_dvo_detect(struct drm_connector *connector,
+		 bool nondestructive)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index ccd4c97e6524..2ea123d8d22b 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -139,7 +139,8 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
 }
 
 static enum drm_connector_status
-intel_hdmi_detect(struct drm_connector *connector)
+intel_hdmi_detect(struct drm_connector *connector,
+		  bool nondestructive)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 4fbb0165b26f..fb1bed8f4071 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -445,7 +445,9 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
  * connected and closed means disconnected.  We also send hotplug events as
  * needed, using lid status notification from the input layer.
  */
-static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_lvds_detect(struct drm_connector *connector,
+		  bool nondestructive)
 {
 	struct drm_device *dev = connector->dev;
 	enum drm_connector_status status = connector_status_connected;
@@ -540,7 +542,9 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	 * the LID nofication event.
 	 */
 	if (connector)
-		connector->status = connector->funcs->detect(connector);
+		connector->status = connector->funcs->detect(connector,
+							     true);
+
 	/* Don't force modeset on machines where it causes a GPU lockup */
 	if (dmi_check_system(intel_no_modeset_on_lid))
 		return NOTIFY_OK;
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index e3b7a7ee39cb..db6b6d4b8fae 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1417,7 +1417,7 @@ intel_analog_is_connected(struct drm_device *dev)
 	if (!analog_connector)
 		return false;
 
-	if (analog_connector->funcs->detect(analog_connector) ==
+	if (analog_connector->funcs->detect(analog_connector, true) ==
 			connector_status_disconnected)
 		return false;
 
@@ -1486,7 +1486,9 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
 	return status;
 }
 
-static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
+static enum drm_connector_status
+intel_sdvo_detect(struct drm_connector *connector,
+		  bool nondestructive)
 {
 	uint16_t response;
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index c671f60ce80b..d20b550c0f55 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1341,7 +1341,8 @@ static void intel_tv_find_better_format(struct drm_connector *connector)
  * we have a pipe programmed in order to probe the TV.
  */
 static enum drm_connector_status
-intel_tv_detect(struct drm_connector *connector)
+intel_tv_detect(struct drm_connector *connector,
+		bool nondestructive)
 {
 	struct drm_display_mode mode;
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
@@ -1353,7 +1354,7 @@ intel_tv_detect(struct drm_connector *connector)
 
 	if (encoder->crtc && encoder->crtc->enabled) {
 		type = intel_tv_detect_type(intel_tv);
-	} else {
+	} else if (nondestructive) {
 		struct drm_crtc *crtc;
 		int dpms_mode;
 
@@ -1364,10 +1365,9 @@ intel_tv_detect(struct drm_connector *connector)
 			intel_release_load_detect_pipe(&intel_tv->base, connector,
 						       dpms_mode);
 		} else
-			type = -1;
-	}
-
-	intel_tv->type = type;
+			return connector_status_unknown;
+	} else
+		return connector->status;
 
 	if (type < 0)
 		return connector_status_disconnected;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index a1473fff06ac..67d515cb67e0 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -168,7 +168,8 @@ nouveau_connector_set_encoder(struct drm_connector *connector,
 }
 
 static enum drm_connector_status
-nouveau_connector_detect(struct drm_connector *connector)
+nouveau_connector_detect(struct drm_connector *connector,
+			 bool nondestructive)
 {
 	struct drm_device *dev = connector->dev;
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
@@ -246,7 +247,8 @@ detect_analog:
 }
 
 static enum drm_connector_status
-nouveau_connector_detect_lvds(struct drm_connector *connector)
+nouveau_connector_detect_lvds(struct drm_connector *connector,
+			      bool nondestructive)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -267,7 +269,7 @@ nouveau_connector_detect_lvds(struct drm_connector *connector)
 
 	/* Try retrieving EDID via DDC */
 	if (!dev_priv->vbios.fp_no_ddc) {
-		status = nouveau_connector_detect(connector);
+		status = nouveau_connector_detect(connector, nondestructive);
 		if (status == connector_status_connected)
 			goto out;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index a9dd7847d96e..31d309a8e75b 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -481,7 +481,9 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_lvds_detect(struct drm_connector *connector,
+		   bool nondestructive)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder = radeon_best_single_encoder(connector);
@@ -594,7 +596,9 @@ static int radeon_vga_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static enum drm_connector_status radeon_vga_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_vga_detect(struct drm_connector *connector,
+		  bool nondestructive)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder;
@@ -691,7 +695,9 @@ static int radeon_tv_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static enum drm_connector_status radeon_tv_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_tv_detect(struct drm_connector *connector,
+		 bool nondestructive)
 {
 	struct drm_encoder *encoder;
 	struct drm_encoder_helper_funcs *encoder_funcs;
@@ -748,7 +754,9 @@ static int radeon_dvi_get_modes(struct drm_connector *connector)
  * we have to check if this analog encoder is shared with anyone else (TV)
  * if its shared we have to set the other connector to disconnected.
  */
-static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_dvi_detect(struct drm_connector *connector,
+		  bool nondestructive)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder = NULL;
@@ -972,7 +980,9 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
-static enum drm_connector_status radeon_dp_detect(struct drm_connector *connector)
+static enum drm_connector_status
+radeon_dp_detect(struct drm_connector *connector,
+		 bool nondestructive)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	enum drm_connector_status ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index 2ff5cf78235f..a527c91c0ba6 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -335,7 +335,8 @@ static void vmw_ldu_connector_restore(struct drm_connector *connector)
 }
 
 static enum drm_connector_status
-	vmw_ldu_connector_detect(struct drm_connector *connector)
+	vmw_ldu_connector_detect(struct drm_connector *connector,
+				 bool nondestructive)
 {
 	if (vmw_connector_to_ldu(connector)->pref_active)
 		return connector_status_connected;
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index c9f3cc5949a8..5536223fbac8 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -386,7 +386,8 @@ struct drm_connector_funcs {
 	void (*dpms)(struct drm_connector *connector, int mode);
 	void (*save)(struct drm_connector *connector);
 	void (*restore)(struct drm_connector *connector);
-	enum drm_connector_status (*detect)(struct drm_connector *connector);
+	enum drm_connector_status (*detect)(struct drm_connector *connector,
+					    bool nondestructive);
 	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);

From b741be82cf2079f71553af595610f17a3a3a752a Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Thu, 9 Sep 2010 19:15:23 -0400
Subject: [PATCH 319/728] drm/radeon/kms/evergreen: fix backend setup

This patch fixes rendering errors on some evergreen boards.
Hardcoding the backend map is not an optimal solution, but
a better fix is being worked on.

Similar to the fix for rv740
(6271901d828b34b27607314026deaf417f9f9b75).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=29986

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/evergreen.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index b8b7f010b25f..79082d4398ae 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1160,14 +1160,25 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 									EVERGREEN_MAX_BACKENDS_MASK));
 			break;
 		}
-	} else
-		gb_backend_map =
-			evergreen_get_tile_pipe_to_backend_map(rdev,
-							       rdev->config.evergreen.max_tile_pipes,
-							       rdev->config.evergreen.max_backends,
-							       ((EVERGREEN_MAX_BACKENDS_MASK <<
-								 rdev->config.evergreen.max_backends) &
-								EVERGREEN_MAX_BACKENDS_MASK));
+	} else {
+		switch (rdev->family) {
+		case CHIP_CYPRESS:
+		case CHIP_HEMLOCK:
+			gb_backend_map = 0x66442200;
+			break;
+		case CHIP_JUNIPER:
+			gb_backend_map = 0x00006420;
+			break;
+		default:
+			gb_backend_map =
+				evergreen_get_tile_pipe_to_backend_map(rdev,
+								       rdev->config.evergreen.max_tile_pipes,
+								       rdev->config.evergreen.max_backends,
+								       ((EVERGREEN_MAX_BACKENDS_MASK <<
+									 rdev->config.evergreen.max_backends) &
+									EVERGREEN_MAX_BACKENDS_MASK));
+		}
+	}
 
 	rdev->config.evergreen.tile_config = gb_addr_config;
 	WREG32(GB_BACKEND_MAP, gb_backend_map);

From ec00efb72f4b88078427d01f38f664c67c7ca0c0 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= <maraeo@gmail.com>
Date: Sun, 12 Sep 2010 05:09:12 +0200
Subject: [PATCH 320/728] drm/radeon/kms: increase lockup detection interval to
 10 sec for r100-r500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

One subtest of mesa/demos/gltestperf takes 9 seconds to complete,
so to prevent an unnecessary gpu reset followed by a hardlock, I am
increasing the interval to 10 seconds after which a GPU is considered
in a locked-up state. This is on RV530. However, with a little slower GPU,
we would surpass the interval easily, so this is not a good fix
for gltestperf.

Nevertheless, this commit also fixes hardlocks in the applications which
render at speed of less than 1 frame per second, where the whole frame
consists of only one command stream. The game Tiny & Big is an example.
This bar is now lowered to 0.1 fps.

Now the question comes down to whether we should (often unsuccessfully)
reset the GPU at all? Once we have stable enough drivers, we won't have to.
Has the time come already?

If possible, this commit should go to stable as well.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r100.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index e817a0bb5eb4..ec64b365ee1f 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -2020,18 +2020,7 @@ bool r100_gpu_cp_is_lockup(struct radeon_device *rdev, struct r100_gpu_lockup *l
 		return false;
 	}
 	elapsed = jiffies_to_msecs(cjiffies - lockup->last_jiffies);
-	if (elapsed >= 3000) {
-		/* very likely the improbable case where current
-		 * rptr is equal to last recorded, a while ago, rptr
-		 * this is more likely a false positive update tracking
-		 * information which should force us to be recall at
-		 * latter point
-		 */
-		lockup->last_cp_rptr = cp->rptr;
-		lockup->last_jiffies = jiffies;
-		return false;
-	}
-	if (elapsed >= 1000) {
+	if (elapsed >= 10000) {
 		dev_err(rdev->dev, "GPU lockup CP stall for more than %lumsec\n", elapsed);
 		return true;
 	}

From a41ceb1c17af06a17c0d88e987215ef20b93c471 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Marek=20Ol=C5=A1=C3=A1k?= <maraeo@gmail.com>
Date: Sun, 12 Sep 2010 05:09:13 +0200
Subject: [PATCH 321/728] drm/radeon/kms: fix the colorbuffer CS checker for
 r300-r500
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This commit fixes bogus CS rejection if it contains a sequence
of the following operations:

- Set the color buffer 0. track->cb[i].robj becomes non-NULL.
- Render.
- Set a larger zbuffer than the previously-set color buffer.
- Set a larger scissor area as well.
- Set the color channel mask to 0 to do depth-only rendering.
- Render. --> rejected, because track->cb[i].robj remained non-NULL,
  therefore the conditional checking for the color channel mask and
  friends is not performed, and the larger scissor area causes
  the rejection.

This fixes bugs:
- https://bugs.freedesktop.org/show_bug.cgi?id=29762
- https://bugs.freedesktop.org/show_bug.cgi?id=28869
And maybe some others which seem to look the same.

If possible, this commit should go to stable as well.

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r100.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index ec64b365ee1f..e151f16a8f86 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -3297,13 +3297,14 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track)
 	unsigned long size;
 	unsigned prim_walk;
 	unsigned nverts;
+	unsigned num_cb = track->num_cb;
 
-	for (i = 0; i < track->num_cb; i++) {
+	if (!track->zb_cb_clear && !track->color_channel_mask &&
+	    !track->blend_read_enable)
+		num_cb = 0;
+
+	for (i = 0; i < num_cb; i++) {
 		if (track->cb[i].robj == NULL) {
-			if (!(track->zb_cb_clear || track->color_channel_mask ||
-			      track->blend_read_enable)) {
-				continue;
-			}
 			DRM_ERROR("[drm] No buffer for color buffer %d !\n", i);
 			return -EINVAL;
 		}

From 2ca9cac965e81da4b74f2dcec4b87ebfd106b357 Mon Sep 17 00:00:00 2001
From: Anisse Astier <anisse@astier.eu>
Date: Fri, 10 Sep 2010 15:47:55 +0200
Subject: [PATCH 322/728] ALSA: hda - Add quirk for Toshiba C650D using a
 Conexant CX20585

Add a quirk for laptop Toshiba Satellite C650D to have proper external HP and
external Mic support.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_conexant.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 71f9d6475b09..972e7c453b3d 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3092,6 +3092,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTO),
 	SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
+	SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),

From 62b2be591a9b12c550308ef7718a31abfc815b50 Mon Sep 17 00:00:00 2001
From: Latchesar Ionkov <lionkov@gmail.com>
Date: Tue, 24 Aug 2010 18:13:59 +0000
Subject: [PATCH 323/728] fs/9p, net/9p: memory leak fixes

Four memory leak fixes in the 9P code.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 fs/9p/vfs_inode.c | 2 ++
 net/9p/client.c   | 7 ++++++-
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index c7c23eab9440..84159cf9c521 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1128,6 +1128,7 @@ v9fs_vfs_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	v9fs_stat2inode(st, dentry->d_inode, dentry->d_inode->i_sb);
 		generic_fillattr(dentry->d_inode, stat);
 
+	p9stat_free(st);
 	kfree(st);
 	return 0;
 }
@@ -1489,6 +1490,7 @@ static int v9fs_readlink(struct dentry *dentry, char *buffer, int buflen)
 
 	retval = strnlen(buffer, buflen);
 done:
+	p9stat_free(st);
 	kfree(st);
 	return retval;
 }
diff --git a/net/9p/client.c b/net/9p/client.c
index dc6f2f26d023..9eb72505308f 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -331,8 +331,10 @@ static void p9_tag_cleanup(struct p9_client *c)
 		}
 	}
 
-	if (c->tagpool)
+	if (c->tagpool) {
+		p9_idpool_put(0, c->tagpool); /* free reserved tag 0 */
 		p9_idpool_destroy(c->tagpool);
+	}
 
 	/* free requests associated with tags */
 	for (row = 0; row < (c->max_tag/P9_ROW_MAXTAG); row++) {
@@ -944,6 +946,7 @@ struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames,
 	int16_t nwqids, count;
 
 	err = 0;
+	wqids = NULL;
 	clnt = oldfid->clnt;
 	if (clone) {
 		fid = p9_fid_create(clnt);
@@ -994,9 +997,11 @@ struct p9_fid *p9_client_walk(struct p9_fid *oldfid, int nwname, char **wnames,
 	else
 		fid->qid = oldfid->qid;
 
+	kfree(wqids);
 	return fid;
 
 clunk_fid:
+	kfree(wqids);
 	p9_client_clunk(fid);
 	fid = NULL;
 

From 5c25f347a7b00b2ebe0a55c4a3cfe4c3e1e8725e Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 24 Aug 2010 10:30:49 +0000
Subject: [PATCH 324/728] fs/9p: Fix error handling in v9fs_get_sb

This was introduced by 7cadb63d58a932041afa3f957d5cbb6ce69dcee5

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 fs/9p/vfs_super.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index f9311077de68..1d12ba0ed3db 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -122,6 +122,10 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 	fid = v9fs_session_init(v9ses, dev_name, data);
 	if (IS_ERR(fid)) {
 		retval = PTR_ERR(fid);
+		/*
+		 * we need to call session_close to tear down some
+		 * of the data structure setup by session_init
+		 */
 		goto close_session;
 	}
 
@@ -144,7 +148,6 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 		retval = -ENOMEM;
 		goto release_sb;
 	}
-
 	sb->s_root = root;
 
 	if (v9fs_proto_dotl(v9ses)) {
@@ -152,7 +155,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 		st = p9_client_getattr_dotl(fid, P9_STATS_BASIC);
 		if (IS_ERR(st)) {
 			retval = PTR_ERR(st);
-			goto clunk_fid;
+			goto release_sb;
 		}
 
 		v9fs_stat2inode_dotl(st, root->d_inode);
@@ -162,7 +165,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 		st = p9_client_stat(fid);
 		if (IS_ERR(st)) {
 			retval = PTR_ERR(st);
-			goto clunk_fid;
+			goto release_sb;
 		}
 
 		root->d_inode->i_ino = v9fs_qid2ino(&st->qid);
@@ -174,19 +177,24 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
 
 	v9fs_fid_add(root, fid);
 
-P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
+	P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
 	simple_set_mnt(mnt, sb);
 	return 0;
 
 clunk_fid:
 	p9_client_clunk(fid);
-
 close_session:
 	v9fs_session_close(v9ses);
 	kfree(v9ses);
 	return retval;
-
 release_sb:
+	/*
+	 * we will do the session_close and root dentry release
+	 * in the below call. But we need to clunk fid, because we haven't
+	 * attached the fid to dentry so it won't get clunked
+	 * automatically.
+	 */
+	p9_client_clunk(fid);
 	deactivate_locked_super(sb);
 	return retval;
 }

From 62726a7ab3a6a3624256172af055ff0a38c6ffa2 Mon Sep 17 00:00:00 2001
From: jvrao <jvrao@linux.vnet.ibm.com>
Date: Wed, 25 Aug 2010 16:26:21 +0000
Subject: [PATCH 325/728] 9p: Check for NULL fid in v9fs_dir_release()

NULL fid should be handled in cases where we endup calling v9fs_dir_release()
before even we instantiate the fid in filp.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 fs/9p/vfs_dir.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 16c8a2a98c1b..899f168fd19c 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -292,9 +292,11 @@ int v9fs_dir_release(struct inode *inode, struct file *filp)
 
 	fid = filp->private_data;
 	P9_DPRINTK(P9_DEBUG_VFS,
-			"inode: %p filp: %p fid: %d\n", inode, filp, fid->fid);
+			"v9fs_dir_release: inode: %p filp: %p fid: %d\n",
+			inode, filp, fid ? fid->fid : -1);
 	filemap_write_and_wait(inode->i_mapping);
-	p9_client_clunk(fid);
+	if (fid)
+		p9_client_clunk(fid);
 	return 0;
 }
 

From 3c30750ffafbc32af040b09f777b67aa2486b063 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Mon, 30 Aug 2010 16:04:35 +0000
Subject: [PATCH 326/728] fs/9p: Use the correct dentry operations

We should use the cached dentry operation only if caching mode is enabled

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 fs/9p/vfs_inode.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 84159cf9c521..a6990bbf6056 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -730,7 +730,10 @@ v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int mode,
 		P9_DPRINTK(P9_DEBUG_VFS, "inode creation failed %d\n", err);
 		goto error;
 	}
-	dentry->d_op = &v9fs_cached_dentry_operations;
+	if (v9ses->cache)
+		dentry->d_op = &v9fs_cached_dentry_operations;
+	else
+		dentry->d_op = &v9fs_dentry_operations;
 	d_instantiate(dentry, inode);
 	err = v9fs_fid_add(dentry, fid);
 	if (err < 0)

From 1d76e3135733a06aa12bb35891c05f306b27b2d6 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Mon, 30 Aug 2010 17:43:07 +0000
Subject: [PATCH 327/728] fs/9p: Don't use dotl version of mknod for dotu inode
 operations

We should not use dotlversion for the dotu inode operations

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 fs/9p/vfs_inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index a6990bbf6056..9e670d527646 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -1947,7 +1947,7 @@ static const struct inode_operations v9fs_dir_inode_operations_dotu = {
 	.unlink = v9fs_vfs_unlink,
 	.mkdir = v9fs_vfs_mkdir,
 	.rmdir = v9fs_vfs_rmdir,
-	.mknod = v9fs_vfs_mknod_dotl,
+	.mknod = v9fs_vfs_mknod,
 	.rename = v9fs_vfs_rename,
 	.getattr = v9fs_vfs_getattr,
 	.setattr = v9fs_vfs_setattr,

From 0bf377bbb0bea6130f35613491887cc622e42a8b Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 12 Sep 2010 08:14:52 +0200
Subject: [PATCH 328/728] sched: Improve latencies under load by decreasing
 minimum scheduling granularity
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Mathieu reported bad latencies with make -j10 kind of kbuild
workloads - which is mostly caused by us scheduling with a
too coarse granularity.

Reduce the minimum granularity some more, to make sure we
can meet the latency target.

I got the following results (make -j10 kbuild load, average of 3
runs):

 vanilla:

  maximum latency: 38278.9 µs
  average latency:  7730.1 µs

 patched:

  maximum latency: 22702.1 µs
  average latency:  6684.8 µs

Mathieu also measured it:

|
| * wakeup-latency.c (SIGEV_THREAD) with make -j10
|
| - Mainline 2.6.35.2 kernel
|
| maximum latency: 45762.1 µs
| average latency: 7348.6 µs
|
| - With only Peter's smaller min_gran (shown below):
|
| maximum latency: 29100.6 µs
| average latency: 6684.1 µs
|

Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <AANLkTi=8m4g01wZPacySoF7U0PevTNVgJoZZrHiUD-pN@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 9b5b4f86b742..a171138a9402 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -54,13 +54,13 @@ enum sched_tunable_scaling sysctl_sched_tunable_scaling
  * Minimal preemption granularity for CPU-bound tasks:
  * (default: 2 msec * (1 + ilog(ncpus)), units: nanoseconds)
  */
-unsigned int sysctl_sched_min_granularity = 2000000ULL;
-unsigned int normalized_sysctl_sched_min_granularity = 2000000ULL;
+unsigned int sysctl_sched_min_granularity = 750000ULL;
+unsigned int normalized_sysctl_sched_min_granularity = 750000ULL;
 
 /*
  * is kept at sysctl_sched_latency / sysctl_sched_min_granularity
  */
-static unsigned int sched_nr_latency = 3;
+static unsigned int sched_nr_latency = 8;
 
 /*
  * After fork, child runs first. If set to 0 (default) then

From edc805b7c5e45c3d7202cea5239985d204178e24 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Mon, 16 Aug 2010 14:05:20 +0200
Subject: [PATCH 329/728] m68k,m68knommu: Wire up fanotify_init, fanotify_mark,
 and prlimit64

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
---
 arch/m68k/include/asm/unistd.h       | 5 ++++-
 arch/m68k/kernel/entry.S             | 3 +++
 arch/m68knommu/kernel/syscalltable.S | 3 +++
 3 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 60b15d0aa072..b43b36beafe3 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -340,10 +340,13 @@
 #define __NR_set_thread_area	334
 #define __NR_atomic_cmpxchg_32	335
 #define __NR_atomic_barrier	336
+#define __NR_fanotify_init	337
+#define __NR_fanotify_mark	338
+#define __NR_prlimit64		339
 
 #ifdef __KERNEL__
 
-#define NR_syscalls		337
+#define NR_syscalls		340
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 2391bdff0996..6360c437dcf5 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -765,4 +765,7 @@ sys_call_table:
 	.long sys_set_thread_area
 	.long sys_atomic_cmpxchg_32	/* 335 */
 	.long sys_atomic_barrier
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
 
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index b30b3eb197a5..79b1ed198c07 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -355,6 +355,9 @@ ENTRY(sys_call_table)
 	.long sys_set_thread_area
 	.long sys_atomic_cmpxchg_32	/* 335 */
 	.long sys_atomic_barrier
+	.long sys_fanotify_init
+	.long sys_fanotify_mark
+	.long sys_prlimit64
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall

From 467c525109d5d542d7d416b0c11bdd54610fe2f4 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Mon, 13 Sep 2010 11:39:20 -0700
Subject: [PATCH 330/728] ceph: fix dn offset during readdir_prepopulate

When adding the readdir results to the cache, ceph_set_dentry_offset was
clobbered our just-set offset.  This can cause the readdir result offsets
to get out of sync with the server.  Add an argument to the helper so
that it does not.

This bug was introduced by 1cd3935bedccf592d44343890251452a6dd74fc4.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/inode.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index e7cca414da03..62377ec37edf 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -845,7 +845,7 @@ static void ceph_set_dentry_offset(struct dentry *dn)
  * the caller) if we fail.
  */
 static struct dentry *splice_dentry(struct dentry *dn, struct inode *in,
-				    bool *prehash)
+				    bool *prehash, bool set_offset)
 {
 	struct dentry *realdn;
 
@@ -877,7 +877,8 @@ static struct dentry *splice_dentry(struct dentry *dn, struct inode *in,
 	}
 	if ((!prehash || *prehash) && d_unhashed(dn))
 		d_rehash(dn);
-	ceph_set_dentry_offset(dn);
+	if (set_offset)
+		ceph_set_dentry_offset(dn);
 out:
 	return dn;
 }
@@ -1062,7 +1063,7 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req,
 				d_delete(dn);
 				goto done;
 			}
-			dn = splice_dentry(dn, in, &have_lease);
+			dn = splice_dentry(dn, in, &have_lease, true);
 			if (IS_ERR(dn)) {
 				err = PTR_ERR(dn);
 				goto done;
@@ -1105,7 +1106,7 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req,
 			goto done;
 		}
 		dout(" linking snapped dir %p to dn %p\n", in, dn);
-		dn = splice_dentry(dn, in, NULL);
+		dn = splice_dentry(dn, in, NULL, true);
 		if (IS_ERR(dn)) {
 			err = PTR_ERR(dn);
 			goto done;
@@ -1237,7 +1238,7 @@ retry_lookup:
 				err = PTR_ERR(in);
 				goto out;
 			}
-			dn = splice_dentry(dn, in, NULL);
+			dn = splice_dentry(dn, in, NULL, false);
 			if (IS_ERR(dn))
 				dn = NULL;
 		}

From 05ed160e89baf7f5fb3432d527fec467d2493626 Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Date: Mon, 13 Sep 2010 19:25:41 +0900
Subject: [PATCH 331/728] kprobes: Fix Kconfig dependency

Fix Kconfig dependency among Kprobes, optprobe and kallsyms.

Kprobes uses kallsyms_lookup for finding target function and
checking instruction boundary, thus CONFIG_KPROBES should select
CONFIG_KALLSYMS.

Optprobe is an optional feature which is supported on x86 arch,
and it also uses kallsyms_lookup for checking instructions in
the target function. Since KALLSYMS_ALL just adds symbols of
kernel variables, it doesn't need to select KALLSYMS_ALL.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>,
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Felipe Contreras <felipe.contreras@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: akpm <akpm@linux-foundation.org>
LKML-Reference: <20100913102541.20260.85700.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/Kconfig b/arch/Kconfig
index 4877a8c8ee16..fe48fc7a3eba 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -32,8 +32,9 @@ config HAVE_OPROFILE
 
 config KPROBES
 	bool "Kprobes"
-	depends on KALLSYMS && MODULES
+	depends on MODULES
 	depends on HAVE_KPROBES
+	select KALLSYMS
 	help
 	  Kprobes allows you to trap at almost any kernel address and
 	  execute a callback function.  register_kprobe() establishes
@@ -45,7 +46,6 @@ config OPTPROBES
 	def_bool y
 	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
-	select KALLSYMS_ALL
 
 config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	bool

From 147fcf1c211f1a87bf4d0711b7e9637f3d6ce080 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 11 Sep 2010 22:10:59 -0700
Subject: [PATCH 332/728] sound: Remove pr_<level> uses of KERN_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/ppc/snd_ps3.c         | 2 +-
 sound/soc/s3c24xx/s3c-dma.c | 3 +--
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c
index 2f12da4da561..581a670e8261 100644
--- a/sound/ppc/snd_ps3.c
+++ b/sound/ppc/snd_ps3.c
@@ -579,7 +579,7 @@ static int snd_ps3_delay_to_bytes(struct snd_pcm_substream *substream,
 				  rate * delay_ms / 1000)
 		* substream->runtime->channels;
 
-	pr_debug(KERN_ERR "%s: time=%d rate=%d bytes=%ld, frames=%d, ret=%d\n",
+	pr_debug("%s: time=%d rate=%d bytes=%ld, frames=%d, ret=%d\n",
 		 __func__,
 		 delay_ms,
 		 rate,
diff --git a/sound/soc/s3c24xx/s3c-dma.c b/sound/soc/s3c24xx/s3c-dma.c
index 1b61c23ff300..f1b1bc4bacfb 100644
--- a/sound/soc/s3c24xx/s3c-dma.c
+++ b/sound/soc/s3c24xx/s3c-dma.c
@@ -94,8 +94,7 @@ static void s3c_dma_enqueue(struct snd_pcm_substream *substream)
 
 		if ((pos + len) > prtd->dma_end) {
 			len  = prtd->dma_end - pos;
-			pr_debug(KERN_DEBUG "%s: corrected dma len %ld\n",
-			       __func__, len);
+			pr_debug("%s: corrected dma len %ld\n", __func__, len);
 		}
 
 		ret = s3c2410_dma_enqueue(prtd->params->channel,

From 2fd818642a3c3a257f3b1262145a52bc1bfebd26 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon, 30 Aug 2010 09:45:40 +0900
Subject: [PATCH 333/728] x86, cpufeature: Suppress compiler warning with gcc
 3.x

Gcc 3.x generates a warning

  arch/x86/include/asm/cpufeature.h: In function `__static_cpu_has':
  arch/x86/include/asm/cpufeature.h:326: warning: asm operand 1 probably doesn't match constraints

on each file.
But static_cpu_has() for gcc 3.x does not need __static_cpu_has().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
LKML-Reference: <201008300127.o7U1RC6Z044051@www262.sakura.ne.jp>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/include/asm/cpufeature.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 781a50b29a49..c6fbb7b430d1 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -296,6 +296,7 @@ extern const char * const x86_power_flags[32];
 
 #endif /* CONFIG_X86_64 */
 
+#if __GNUC__ >= 4
 /*
  * Static testing of CPU features.  Used the same as boot_cpu_has().
  * These are only valid after alternatives have run, but will statically
@@ -304,7 +305,7 @@ extern const char * const x86_power_flags[32];
  */
 static __always_inline __pure bool __static_cpu_has(u16 bit)
 {
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+#if __GNUC__ > 4 || __GNUC_MINOR__ >= 5
 		asm goto("1: jmp %l[t_no]\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
@@ -345,7 +346,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 #endif
 }
 
-#if __GNUC__ >= 4
 #define static_cpu_has(bit)					\
 (								\
 	__builtin_constant_p(boot_cpu_has(bit)) ?		\

From 08c2b394b98786ebb067e2a54d08f1f6f0d247da Mon Sep 17 00:00:00 2001
From: "basile@opensource.dyc.edu" <basile@opensource.dyc.edu>
Date: Mon, 13 Sep 2010 06:13:19 -0400
Subject: [PATCH 334/728] x86, build: Disable -fPIE when compiling with
 CONFIG_CC_STACKPROTECTOR=y

The arch/x86/Makefile uses scripts/gcc-x86_$(BITS)-has-stack-protector.sh
to check if cc1 supports -fstack-protector.  When -fPIE is passed to cc1,
these scripts fail causing stack protection to be disabled even when it
is available.

This fix is similar to commit c47efe5548abbf53c2f66e06dcb46183b11d6b22

Reported-by: Kai Dietrich <mail@cleeus.de>
Signed-off-by: Magnus Granberg <zorry@gentoo.org>
LKML-Reference: <20100913101319.748A1148E216@opensource.dyc.edu>
Signed-off-by: Anthony G. Basile <basile@opensource.dyc.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 8aa1b59b9074..e8c8881351b3 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -74,7 +74,7 @@ endif
 
 ifdef CONFIG_CC_STACKPROTECTOR
 	cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
-        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
+        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(KBUILD_CPPFLAGS) $(biarch)),y)
                 stackp-y := -fstack-protector
                 KBUILD_CFLAGS += $(stackp-y)
         else

From dbee032295dac88742734ee9988e08a0e4f2f732 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Thu, 2 Sep 2010 11:28:39 +0000
Subject: [PATCH 335/728] ide: Fix ordering of procfs registry.

We must ensure that ide_proc_port_register_devices() occurs on an
interface before ide_proc_register_driver() executes for that
interfaces drives.

Therefore defer the registry of the driver device objects backed by
ide_bus_type until after ide_proc_port_register_devices() has run
and thus all of the drive->proc procfs directory pointers have been
setup.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/ide/ide-probe.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 4c3d1bfec0c5..068cef0a987a 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1444,14 +1444,6 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 			ide_acpi_port_init_devices(hwif);
 	}
 
-	ide_host_for_each_port(i, hwif, host) {
-		if (hwif == NULL)
-			continue;
-
-		if (hwif->present)
-			hwif_register_devices(hwif);
-	}
-
 	ide_host_for_each_port(i, hwif, host) {
 		if (hwif == NULL)
 			continue;
@@ -1459,8 +1451,10 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
 		ide_sysfs_register_port(hwif);
 		ide_proc_register_port(hwif);
 
-		if (hwif->present)
+		if (hwif->present) {
 			ide_proc_port_register_devices(hwif);
+			hwif_register_devices(hwif);
+		}
 	}
 
 	return j ? 0 : -1;

From 0fe7f885043ea0e3e026cc98cfd7f8715018c023 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu, 9 Sep 2010 21:29:52 +0900
Subject: [PATCH 336/728] ARM: S5P: Fix DMA coherent mask for FIMC

FIMC driver uses DMA_coherent allocator, which requires proper dma mask
to be set.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s5p/dev-fimc0.c | 7 +++++++
 arch/arm/plat-s5p/dev-fimc1.c | 7 +++++++
 arch/arm/plat-s5p/dev-fimc2.c | 7 +++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
index d3f1a9b5d2b5..f9203fa8fe23 100644
--- a/arch/arm/plat-s5p/dev-fimc0.c
+++ b/arch/arm/plat-s5p/dev-fimc0.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -28,9 +29,15 @@ static struct resource s5p_fimc0_resource[] = {
 	},
 };
 
+static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc0 = {
 	.name		= "s5p-fimc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5p_fimc0_resource),
 	.resource	= s5p_fimc0_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc0_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
index 41bd6986d0ad..7ed91a34dd4a 100644
--- a/arch/arm/plat-s5p/dev-fimc1.c
+++ b/arch/arm/plat-s5p/dev-fimc1.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -28,9 +29,15 @@ static struct resource s5p_fimc1_resource[] = {
 	},
 };
 
+static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc1 = {
 	.name		= "s5p-fimc",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5p_fimc1_resource),
 	.resource	= s5p_fimc1_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc1_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
index dfddeda6d4a3..5543d637396c 100644
--- a/arch/arm/plat-s5p/dev-fimc2.c
+++ b/arch/arm/plat-s5p/dev-fimc2.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
@@ -28,9 +29,15 @@ static struct resource s5p_fimc2_resource[] = {
 	},
 };
 
+static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32);
+
 struct platform_device s5p_device_fimc2 = {
 	.name		= "s5p-fimc",
 	.id		= 2,
 	.num_resources	= ARRAY_SIZE(s5p_fimc2_resource),
 	.resource	= s5p_fimc2_resource,
+	.dev		= {
+		.dma_mask		= &s5p_fimc2_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
 };

From 80e2f36aab7e69a193926814b73b3609c2f69f20 Mon Sep 17 00:00:00 2001
From: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Thu, 9 Sep 2010 21:31:46 +0900
Subject: [PATCH 337/728] ARM: S5P: Decrease IO Registers memory region size on
 FIMC

IO registers region size of all FIMC versions is less than 1kB so there
is no need to reserve 1M.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-s5p/dev-fimc0.c | 2 +-
 arch/arm/plat-s5p/dev-fimc1.c | 2 +-
 arch/arm/plat-s5p/dev-fimc2.c | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c
index f9203fa8fe23..608770fc1531 100644
--- a/arch/arm/plat-s5p/dev-fimc0.c
+++ b/arch/arm/plat-s5p/dev-fimc0.c
@@ -19,7 +19,7 @@
 static struct resource s5p_fimc0_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC0,
-		.end	= S5P_PA_FIMC0 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC0 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c
index 7ed91a34dd4a..76e3a97a87d3 100644
--- a/arch/arm/plat-s5p/dev-fimc1.c
+++ b/arch/arm/plat-s5p/dev-fimc1.c
@@ -19,7 +19,7 @@
 static struct resource s5p_fimc1_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC1,
-		.end	= S5P_PA_FIMC1 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC1 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c
index 5543d637396c..24d29816fa2c 100644
--- a/arch/arm/plat-s5p/dev-fimc2.c
+++ b/arch/arm/plat-s5p/dev-fimc2.c
@@ -19,7 +19,7 @@
 static struct resource s5p_fimc2_resource[] = {
 	[0] = {
 		.start	= S5P_PA_FIMC2,
-		.end	= S5P_PA_FIMC2 + SZ_1M - 1,
+		.end	= S5P_PA_FIMC2 + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {

From f1c894de475c2455e6cedcc91d0ee4eb04388f3b Mon Sep 17 00:00:00 2001
From: MyungJoo Ham <myungjoo.ham@samsung.com>
Date: Sat, 21 Aug 2010 09:18:19 +0900
Subject: [PATCH 338/728] ARM: S5PV210: Update I2C-1 Clock Register Property.

CLK_GATE_IP3[8] is RESERVED. The port "I2C_HDMI_DDC" of CLK_GATE_IP3[10] is
used as another I2C port. Therefore, defined the unused I2C-1 as another I2C
there was left undefined but used.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index af91fefef2c6..825b8681fbb3 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -357,7 +357,7 @@ static struct clk init_clocks_disable[] = {
 		.id		= 1,
 		.parent		= &clk_pclk_psys.clk,
 		.enable		= s5pv210_clk_ip3_ctrl,
-		.ctrlbit	= (1<<8),
+		.ctrlbit	= (1 << 10),
 	}, {
 		.name		= "i2c",
 		.id		= 2,

From a203a13a8843c3ec2d4dbc6285d000079a12afa5 Mon Sep 17 00:00:00 2001
From: Kyungmin Park <kyungmin.park@samsung.com>
Date: Sat, 21 Aug 2010 11:48:45 +0900
Subject: [PATCH 339/728] ARM: S5PV210: Reduce the iodesc length of systimer

It's enough to use 4KiB.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index b9f4d677cf55..77f456c91ad3 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -47,7 +47,7 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	{
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
 		.pfn		= __phys_to_pfn(S5PV210_PA_SYSTIMER),
-		.length		= SZ_1M,
+		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)VA_VIC2,

From 8fe294caf8c868edd9046251824a0af91991bf43 Mon Sep 17 00:00:00 2001
From: Guillaume Chazarain <guichaz@gmail.com>
Date: Sun, 12 Sep 2010 21:32:35 +0200
Subject: [PATCH 340/728] HID: fix hiddev's use of usb_find_interface

My macbook infrared remote control was broken by commit
bd25f4dd6972755579d0ea50d1a5ace2e9b00d1a ("HID: hiddev: use
usb_find_interface, get rid of BKL").

This device appears in dmesg as:
apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device
[Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0

It stopped working as lircd was getting ENODEV when opening /dev/usb/hiddev0.

AFAICS hiddev_driver is a dummy driver so usb_find_interface(&hiddev_driver)
does not find anything.

The device is associated with the usbhid driver, so let's do
usb_find_interface(&hid_driver) instead.

$ ls -l /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver
lrwxrwxrwx 1 root root 0 2010-09-12 16:28 /sys/devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/usb/hiddev0/device/driver -> ../../../../../../bus/usb/drivers/usbhid

Signed-off-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
---
 drivers/hid/usbhid/hid-core.c | 5 +++++
 drivers/hid/usbhid/hiddev.c   | 2 +-
 drivers/hid/usbhid/usbhid.h   | 1 +
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index ffd6899d4ba0..599041a7f670 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -1446,6 +1446,11 @@ static const struct hid_device_id hid_usb_table[] = {
 	{ }
 };
 
+struct usb_interface *usbhid_find_interface(int minor)
+{
+	return usb_find_interface(&hid_driver, minor);
+}
+
 static struct hid_driver hid_usb_driver = {
 	.name = "generic-usb",
 	.id_table = hid_usb_table,
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index 0a29c51114aa..681e620eb95b 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -270,7 +270,7 @@ static int hiddev_open(struct inode *inode, struct file *file)
 	struct hiddev *hiddev;
 	int res;
 
-	intf = usb_find_interface(&hiddev_driver, iminor(inode));
+	intf = usbhid_find_interface(iminor(inode));
 	if (!intf)
 		return -ENODEV;
 	hid = usb_get_intfdata(intf);
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 693fd3e720df..89d2e847dcc6 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -42,6 +42,7 @@ void usbhid_submit_report
 (struct hid_device *hid, struct hid_report *report, unsigned char dir);
 int usbhid_get_power(struct hid_device *hid);
 void usbhid_put_power(struct hid_device *hid);
+struct usb_interface *usbhid_find_interface(int minor);
 
 /* iofl flags */
 #define HID_CTRL_RUNNING	1

From da01c2f733f5eaa1b0670e7b584f431934c60306 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Fri, 10 Sep 2010 19:43:12 +0900
Subject: [PATCH 341/728] ARM: S5PV210: Add FIMC clocks

These clocks enables FIMC driver to operate on machines, which
bootloader power gated FIMC devices to save power on boot.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s5pv210/clock.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 825b8681fbb3..cfecd70657cb 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -280,6 +280,24 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_hclk_dsys.clk,
 		.enable		= s5pv210_clk_ip0_ctrl,
 		.ctrlbit	= (1<<29),
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 24),
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 25),
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_hclk_dsys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 26),
 	}, {
 		.name		= "otg",
 		.id		= -1,

From 0770e5280efd6f0001972a2b5127dffad0e22591 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Mon, 30 Aug 2010 10:45:54 +0900
Subject: [PATCH 342/728] ARM: SAMSUNG: Fix on drive strength value

This patch fixes on defined drive strength value for GPIO.
According to data sheet, if we want drive strength 1x, the value
should be 00(b), if 2x should be 10(b), if 3x should be 01(b),
and if 4x should be 11(b). Also fixes comment(from S5C to S5P).

Reported-by: Janghyuck Kim <janghyuck.kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/include/plat/gpio-cfg.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index db4112c6f2be..1c6b92947c5d 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -143,12 +143,12 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 /* Define values for the drvstr available for each gpio pin.
  *
  * These values control the value of the output signal driver strength,
- * configurable on most pins on the S5C series.
+ * configurable on most pins on the S5P series.
  */
-#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x00)
-#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x01)
-#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x10)
-#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x11)
+#define S5P_GPIO_DRVSTR_LV1	((__force s5p_gpio_drvstr_t)0x0)
+#define S5P_GPIO_DRVSTR_LV2	((__force s5p_gpio_drvstr_t)0x2)
+#define S5P_GPIO_DRVSTR_LV3	((__force s5p_gpio_drvstr_t)0x1)
+#define S5P_GPIO_DRVSTR_LV4	((__force s5p_gpio_drvstr_t)0x3)
 
 /**
  * s5c_gpio_get_drvstr() - get the driver streght value of a gpio pin

From cbd2780fcefc370732c1f1526fb784573308177d Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Mon, 30 Aug 2010 12:07:58 +0900
Subject: [PATCH 343/728] ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr

This patch fixes bug on gpio drive strength helper function.

The offset should be like follwoing.
-       off = chip->chip.base - pin;
+       off = pin - chip->chip.base;

In the s5p_gpio_get_drvstr(),
the second line is unnecessary, because overwrite drvstr.
        drvstr = __raw_readl(reg);
-       drvstr = 0xffff & (0x3 << shift);

And need 2bit masking before return the drvstr value.
        drvstr = drvstr >> shift;
+       drvstr &= 0x3;

In the s5p_gpio_set_drvstr(), need relevant bit clear.
        tmp = __raw_readl(reg);
+       tmp &= ~(0x3 << shift);
        tmp |= drvstr << shift;

Reported-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/plat-samsung/gpio-config.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 57b68a50f45e..e3d41eaed1ff 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -273,13 +273,13 @@ s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	drvstr = __raw_readl(reg);
-	drvstr = 0xffff & (0x3 << shift);
 	drvstr = drvstr >> shift;
+	drvstr &= 0x3;
 
 	return (__force s5p_gpio_drvstr_t)drvstr;
 }
@@ -296,11 +296,12 @@ int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr)
 	if (!chip)
 		return -EINVAL;
 
-	off = chip->chip.base - pin;
+	off = pin - chip->chip.base;
 	shift = off * 2;
 	reg = chip->base + 0x0C;
 
 	tmp = __raw_readl(reg);
+	tmp &= ~(0x3 << shift);
 	tmp |= drvstr << shift;
 
 	__raw_writel(tmp, reg);

From 23a07eb0e8ea7d5b6ac41f2cc647e7ae53859292 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 9 Sep 2010 11:12:37 +0900
Subject: [PATCH 344/728] ARM: S3C64XX: Fix dev-spi build

The irqs.h usage here got missed in the Samsung platform reorganisation.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/dev-spi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index a492b982aa06..bfa3ef770bd8 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -18,10 +18,10 @@
 #include <mach/map.h>
 #include <mach/gpio-bank-c.h>
 #include <mach/spi-clocks.h>
+#include <mach/irqs.h>
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
 
 static char *spi_src_clks[] = {
 	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",

From 930a9e283516a3a3595c0c515113f1b78d07f695 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue, 14 Sep 2010 11:07:23 +0100
Subject: [PATCH 345/728] drm: Use a nondestructive mode for output detect when
 polling (v2)

v2: Julien Cristau pointed out that @nondestructive results in
double-negatives and confusion when trying to interpret the parameter,
so use @force instead. Much easier to type as well. ;-)

And fix the miscompilation of vmgfx reported by Sedat Dilek.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_crtc_helper.c           |  4 ++--
 drivers/gpu/drm/i915/intel_crt.c            |  5 ++---
 drivers/gpu/drm/i915/intel_dp.c             |  3 +--
 drivers/gpu/drm/i915/intel_dvo.c            |  3 +--
 drivers/gpu/drm/i915/intel_hdmi.c           |  3 +--
 drivers/gpu/drm/i915/intel_lvds.c           |  5 ++---
 drivers/gpu/drm/i915/intel_sdvo.c           |  5 ++---
 drivers/gpu/drm/i915/intel_tv.c             |  5 ++---
 drivers/gpu/drm/nouveau/nouveau_connector.c |  8 +++-----
 drivers/gpu/drm/radeon/radeon_connectors.c  | 15 +++++----------
 drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c         |  6 +++---
 include/drm/drm_crtc.h                      |  9 ++++++++-
 12 files changed, 32 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index fb6b70fc6572..dcbeb98f195a 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -103,7 +103,7 @@ int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
 		if (connector->funcs->force)
 			connector->funcs->force(connector);
 	} else {
-		connector->status = connector->funcs->detect(connector, false);
+		connector->status = connector->funcs->detect(connector, true);
 		drm_kms_helper_poll_enable(dev);
 	}
 
@@ -866,7 +866,7 @@ static void output_poll_execute(struct work_struct *work)
 		    !(connector->polled & DRM_CONNECTOR_POLL_HPD))
 			continue;
 
-		status = connector->funcs->detect(connector, true);
+		status = connector->funcs->detect(connector, false);
 		if (old_status != status)
 			changed = true;
 	}
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 0350e5d711f8..a02a8df73727 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -401,8 +401,7 @@ intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder
 }
 
 static enum drm_connector_status
-intel_crt_detect(struct drm_connector *connector,
-		 bool nondestructive)
+intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
@@ -421,7 +420,7 @@ intel_crt_detect(struct drm_connector *connector,
 	if (intel_crt_detect_ddc(encoder))
 		return connector_status_connected;
 
-	if (nondestructive)
+	if (!force)
 		return connector->status;
 
 	/* for pre-945g platforms use load detect */
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e1a2a05fb838..1a51ee07de3e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1386,8 +1386,7 @@ ironlake_dp_detect(struct drm_connector *connector)
  * \return false if DP port is disconnected.
  */
 static enum drm_connector_status
-intel_dp_detect(struct drm_connector *connector,
-		bool nondestructive)
+intel_dp_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
diff --git a/drivers/gpu/drm/i915/intel_dvo.c b/drivers/gpu/drm/i915/intel_dvo.c
index f0de1addf8a4..7c9ec1472d46 100644
--- a/drivers/gpu/drm/i915/intel_dvo.c
+++ b/drivers/gpu/drm/i915/intel_dvo.c
@@ -222,8 +222,7 @@ static void intel_dvo_mode_set(struct drm_encoder *encoder,
  * Unimplemented.
  */
 static enum drm_connector_status
-intel_dvo_detect(struct drm_connector *connector,
-		 bool nondestructive)
+intel_dvo_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_dvo *intel_dvo = enc_to_intel_dvo(encoder);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 2ea123d8d22b..926934a482ec 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -139,8 +139,7 @@ static bool intel_hdmi_mode_fixup(struct drm_encoder *encoder,
 }
 
 static enum drm_connector_status
-intel_hdmi_detect(struct drm_connector *connector,
-		  bool nondestructive)
+intel_hdmi_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index fb1bed8f4071..6ec39a86ed06 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -446,8 +446,7 @@ static void intel_lvds_mode_set(struct drm_encoder *encoder,
  * needed, using lid status notification from the input layer.
  */
 static enum drm_connector_status
-intel_lvds_detect(struct drm_connector *connector,
-		  bool nondestructive)
+intel_lvds_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
 	enum drm_connector_status status = connector_status_connected;
@@ -543,7 +542,7 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
 	 */
 	if (connector)
 		connector->status = connector->funcs->detect(connector,
-							     true);
+							     false);
 
 	/* Don't force modeset on machines where it causes a GPU lockup */
 	if (dmi_check_system(intel_no_modeset_on_lid))
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index db6b6d4b8fae..e8e902d614ed 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1417,7 +1417,7 @@ intel_analog_is_connected(struct drm_device *dev)
 	if (!analog_connector)
 		return false;
 
-	if (analog_connector->funcs->detect(analog_connector, true) ==
+	if (analog_connector->funcs->detect(analog_connector, false) ==
 			connector_status_disconnected)
 		return false;
 
@@ -1487,8 +1487,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
 }
 
 static enum drm_connector_status
-intel_sdvo_detect(struct drm_connector *connector,
-		  bool nondestructive)
+intel_sdvo_detect(struct drm_connector *connector, bool force)
 {
 	uint16_t response;
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index d20b550c0f55..4a117e318a73 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -1341,8 +1341,7 @@ static void intel_tv_find_better_format(struct drm_connector *connector)
  * we have a pipe programmed in order to probe the TV.
  */
 static enum drm_connector_status
-intel_tv_detect(struct drm_connector *connector,
-		bool nondestructive)
+intel_tv_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_display_mode mode;
 	struct drm_encoder *encoder = intel_attached_encoder(connector);
@@ -1354,7 +1353,7 @@ intel_tv_detect(struct drm_connector *connector,
 
 	if (encoder->crtc && encoder->crtc->enabled) {
 		type = intel_tv_detect_type(intel_tv);
-	} else if (nondestructive) {
+	} else if (force) {
 		struct drm_crtc *crtc;
 		int dpms_mode;
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 67d515cb67e0..87186a4bbf03 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -168,8 +168,7 @@ nouveau_connector_set_encoder(struct drm_connector *connector,
 }
 
 static enum drm_connector_status
-nouveau_connector_detect(struct drm_connector *connector,
-			 bool nondestructive)
+nouveau_connector_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
@@ -247,8 +246,7 @@ detect_analog:
 }
 
 static enum drm_connector_status
-nouveau_connector_detect_lvds(struct drm_connector *connector,
-			      bool nondestructive)
+nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
@@ -269,7 +267,7 @@ nouveau_connector_detect_lvds(struct drm_connector *connector,
 
 	/* Try retrieving EDID via DDC */
 	if (!dev_priv->vbios.fp_no_ddc) {
-		status = nouveau_connector_detect(connector, nondestructive);
+		status = nouveau_connector_detect(connector, force);
 		if (status == connector_status_connected)
 			goto out;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 31d309a8e75b..ecc1a8fafbfd 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -482,8 +482,7 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector,
 }
 
 static enum drm_connector_status
-radeon_lvds_detect(struct drm_connector *connector,
-		   bool nondestructive)
+radeon_lvds_detect(struct drm_connector *connector, bool force)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder = radeon_best_single_encoder(connector);
@@ -597,8 +596,7 @@ static int radeon_vga_mode_valid(struct drm_connector *connector,
 }
 
 static enum drm_connector_status
-radeon_vga_detect(struct drm_connector *connector,
-		  bool nondestructive)
+radeon_vga_detect(struct drm_connector *connector, bool force)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder;
@@ -696,8 +694,7 @@ static int radeon_tv_mode_valid(struct drm_connector *connector,
 }
 
 static enum drm_connector_status
-radeon_tv_detect(struct drm_connector *connector,
-		 bool nondestructive)
+radeon_tv_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_encoder *encoder;
 	struct drm_encoder_helper_funcs *encoder_funcs;
@@ -755,8 +752,7 @@ static int radeon_dvi_get_modes(struct drm_connector *connector)
  * if its shared we have to set the other connector to disconnected.
  */
 static enum drm_connector_status
-radeon_dvi_detect(struct drm_connector *connector,
-		  bool nondestructive)
+radeon_dvi_detect(struct drm_connector *connector, bool force)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	struct drm_encoder *encoder = NULL;
@@ -981,8 +977,7 @@ static int radeon_dp_get_modes(struct drm_connector *connector)
 }
 
 static enum drm_connector_status
-radeon_dp_detect(struct drm_connector *connector,
-		 bool nondestructive)
+radeon_dp_detect(struct drm_connector *connector, bool force)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
 	enum drm_connector_status ret = connector_status_disconnected;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index a527c91c0ba6..7083b1a24df3 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -336,7 +336,7 @@ static void vmw_ldu_connector_restore(struct drm_connector *connector)
 
 static enum drm_connector_status
 	vmw_ldu_connector_detect(struct drm_connector *connector,
-				 bool nondestructive)
+				 bool force)
 {
 	if (vmw_connector_to_ldu(connector)->pref_active)
 		return connector_status_connected;
@@ -517,7 +517,7 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
 
 	drm_connector_init(dev, connector, &vmw_legacy_connector_funcs,
 			   DRM_MODE_CONNECTOR_LVDS);
-	connector->status = vmw_ldu_connector_detect(connector);
+	connector->status = vmw_ldu_connector_detect(connector, true);
 
 	drm_encoder_init(dev, encoder, &vmw_legacy_encoder_funcs,
 			 DRM_MODE_ENCODER_LVDS);
@@ -611,7 +611,7 @@ int vmw_kms_ldu_update_layout(struct vmw_private *dev_priv, unsigned num,
 			ldu->pref_height = 600;
 			ldu->pref_active = false;
 		}
-		con->status = vmw_ldu_connector_detect(con);
+		con->status = vmw_ldu_connector_detect(con, true);
 	}
 
 	mutex_unlock(&dev->mode_config.mutex);
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 5536223fbac8..3e5a51af757c 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -386,8 +386,15 @@ struct drm_connector_funcs {
 	void (*dpms)(struct drm_connector *connector, int mode);
 	void (*save)(struct drm_connector *connector);
 	void (*restore)(struct drm_connector *connector);
+
+	/* Check to see if anything is attached to the connector.
+	 * @force is set to false whilst polling, true when checking the
+	 * connector due to user request. @force can be used by the driver
+	 * to avoid expensive, destructive operations during automated
+	 * probing.
+	 */
 	enum drm_connector_status (*detect)(struct drm_connector *connector,
-					    bool nondestructive);
+					    bool force);
 	int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);

From b64c115eb22516ecd187c74ad6de3f1693f1dc7b Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Tue, 14 Sep 2010 20:14:38 +1000
Subject: [PATCH 346/728] drm: fix race between driver loading and userspace
 open.

Not 100% sure this is due to BKL removal, its most likely a combination
of that + userspace timing changes in udev/plymouth. The drm adds the sysfs
device before the driver has completed internal loading, this causes udev
to make the node and plymouth to open it before we've completed loading.

The proper solution is to delay the sysfs manipulation until later in loading
however this causes knock on issues with sysfs connector nodes, so we can use
the global mutex to serialise loading and userspace opens.

Reported-by: Toni Spets (hifi on #radeon)
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_pci.c      | 4 ++++
 drivers/gpu/drm/drm_platform.c | 5 +++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
index e20f78b542a7..f5bd9e590c80 100644
--- a/drivers/gpu/drm/drm_pci.c
+++ b/drivers/gpu/drm/drm_pci.c
@@ -164,6 +164,8 @@ int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 	dev->hose = pdev->sysdata;
 #endif
 
+	mutex_lock(&drm_global_mutex);
+
 	if ((ret = drm_fill_in_dev(dev, ent, driver))) {
 		printk(KERN_ERR "DRM: Fill_in_dev failed.\n");
 		goto err_g2;
@@ -199,6 +201,7 @@ int drm_get_pci_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
 		 driver->name, driver->major, driver->minor, driver->patchlevel,
 		 driver->date, pci_name(pdev), dev->primary->index);
 
+	mutex_unlock(&drm_global_mutex);
 	return 0;
 
 err_g4:
@@ -210,6 +213,7 @@ err_g2:
 	pci_disable_device(pdev);
 err_g1:
 	kfree(dev);
+	mutex_unlock(&drm_global_mutex);
 	return ret;
 }
 EXPORT_SYMBOL(drm_get_pci_dev);
diff --git a/drivers/gpu/drm/drm_platform.c b/drivers/gpu/drm/drm_platform.c
index 460e9a3afa8d..92d1d0fb7b75 100644
--- a/drivers/gpu/drm/drm_platform.c
+++ b/drivers/gpu/drm/drm_platform.c
@@ -53,6 +53,8 @@ int drm_get_platform_dev(struct platform_device *platdev,
 	dev->platformdev = platdev;
 	dev->dev = &platdev->dev;
 
+	mutex_lock(&drm_global_mutex);
+
 	ret = drm_fill_in_dev(dev, NULL, driver);
 
 	if (ret) {
@@ -87,6 +89,8 @@ int drm_get_platform_dev(struct platform_device *platdev,
 
 	list_add_tail(&dev->driver_item, &driver->device_list);
 
+	mutex_unlock(&drm_global_mutex);
+
 	DRM_INFO("Initialized %s %d.%d.%d %s on minor %d\n",
 		 driver->name, driver->major, driver->minor, driver->patchlevel,
 		 driver->date, dev->primary->index);
@@ -100,6 +104,7 @@ err_g2:
 		drm_put_minor(&dev->control);
 err_g1:
 	kfree(dev);
+	mutex_unlock(&drm_global_mutex);
 	return ret;
 }
 EXPORT_SYMBOL(drm_get_platform_dev);

From f90087eea44ce5fad139f086bc9d89ca37b0edc2 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 7 Sep 2010 11:42:45 -0400
Subject: [PATCH 347/728] drm/radeon/kms: force legacy pll algo for RV620 LVDS

There has been periodic evidence that LVDS, on at least some
panels, prefers the dividers selected by the legacy pll algo.
This patch forces the use of the legacy pll algo on RV620
LVDS panels.  The old behavior (new pll algo) can be selected
by setting the new_pll module parameter to 1.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=30029

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/atombios_crtc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index 464a81a1990f..cd0290f946cf 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -539,14 +539,15 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					pll->algo = PLL_ALGO_LEGACY;
 					pll->flags |= RADEON_PLL_PREFER_CLOSEST_LOWER;
 				}
-				/* There is some evidence (often anecdotal) that RV515 LVDS
+				/* There is some evidence (often anecdotal) that RV515/RV620 LVDS
 				 * (on some boards at least) prefers the legacy algo.  I'm not
 				 * sure whether this should handled generically or on a
 				 * case-by-case quirk basis.  Both algos should work fine in the
 				 * majority of cases.
 				 */
 				if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) &&
-				    (rdev->family == CHIP_RV515)) {
+				    ((rdev->family == CHIP_RV515) ||
+				     (rdev->family == CHIP_RV620))) {
 					/* allow the user to overrride just in case */
 					if (radeon_new_pll == 1)
 						pll->algo = PLL_ALGO_NEW;

From 3894335876a6257ac46e14845bd37ae6fb0f7c87 Mon Sep 17 00:00:00 2001
From: Stephen Warren <swarren@nvidia.com>
Date: Tue, 14 Sep 2010 10:48:59 -0600
Subject: [PATCH 348/728] ALSA: patch_nvhdmi.c: Fix supported sample rate list.

22050 isn't a valid HDMI sample rate. 32000 is.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-By: Wei Ni <wni@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_nvhdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 69b950d527c3..baa108b9d6aa 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -84,7 +84,7 @@ static struct hda_verb nvhdmi_basic_init_7x[] = {
 #else
 /* support all rates and formats */
 #define SUPPORTED_RATES \
-	(SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+	(SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
 	SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
 	 SNDRV_PCM_RATE_192000)
 #define SUPPORTED_MAXBPS	24

From 8bef9239ee1a42eb37d3f83bacf6a75f019c028d Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 14 Sep 2010 15:45:44 -0700
Subject: [PATCH 349/728] ceph: correctly set 'follows' in flushsnap messages

The 'follows' should match the seq for the snap context for the given snap
cap, which is the context under which we have been dirtying and writing
data and metadata.  The snapshot that _contains_ those updates thus
_follows_ that context's seq #.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/snap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 4868b9dcac5a..9e836afba341 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -467,7 +467,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci)
 		INIT_LIST_HEAD(&capsnap->ci_item);
 		INIT_LIST_HEAD(&capsnap->flushing_item);
 
-		capsnap->follows = snapc->seq - 1;
+		capsnap->follows = snapc->seq;
 		capsnap->issued = __ceph_caps_issued(ci, NULL);
 		capsnap->dirty = dirty;
 

From cfc0bf6640dfd0f43bf8bfec5a475284809baa4d Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 14 Sep 2010 15:50:59 -0700
Subject: [PATCH 350/728] ceph: stop sending FLUSHSNAPs when we hit a dirty
 capsnap

Stop sending FLUSHSNAP messages when we hit a capsnap that has dirty_pages
or is still writing.  We'll send the newer capsnaps only after the older
ones complete.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/caps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index a2069b6680ae..9fbe9019155c 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1227,7 +1227,7 @@ retry:
 		 * pages to be written out.
 		 */
 		if (capsnap->dirty_pages || capsnap->writing)
-			continue;
+			break;
 
 		/*
 		 * if cap writeback already occurred, we should have dropped
@@ -1276,8 +1276,8 @@ retry:
 			      &session->s_cap_snaps_flushing);
 		spin_unlock(&inode->i_lock);
 
-		dout("flush_snaps %p cap_snap %p follows %lld size %llu\n",
-		     inode, capsnap, next_follows, capsnap->size);
+		dout("flush_snaps %p cap_snap %p follows %lld tid %llu\n",
+		     inode, capsnap, capsnap->follows, capsnap->flush_tid);
 		send_cap_msg(session, ceph_vino(inode).ino, 0,
 			     CEPH_CAP_OP_FLUSHSNAP, capsnap->issued, 0,
 			     capsnap->dirty, 0, capsnap->flush_tid, 0, mseq,

From 54ff7e595d763d894104d421b103a89f7becf47c Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 14 Sep 2010 22:10:21 +0200
Subject: [PATCH 351/728] x86: hpet: Work around hardware stupidity

This more or less reverts commits 08be979 (x86: Force HPET
readback_cmp for all ATI chipsets) and 30a564be (x86, hpet: Restrict
read back to affected ATI chipsets) to the status of commit 8da854c
(x86, hpet: Erratum workaround for read after write of HPET
comparator).

The delta to commit 8da854c is mostly comments and the change from
WARN_ONCE to printk_once as we know the call path of this function
already.

This needs really in depth explanation:

First of all the HPET design is a complete failure. Having a counter
compare register which generates an interrupt on matching values
forces the software to do at least one superfluous readback of the
counter register.

While it is nice in theory to program "absolute" time events it is
practically useless because the timer runs at some absurd frequency
which can never be matched to real world units. So we are forced to
calculate a relative delta and this forces a readout of the actual
counter value, adding the delta and programming the compare
register. When the delta is small enough we run into the danger that
we program a compare value which is already in the past. Due to the
compare for equal nature of HPET we need to read back the counter
value after writing the compare rehgister (btw. this is necessary for
absolute timeouts as well) to make sure that we did not miss the timer
event. We try to work around that by setting the minimum delta to a
value which is larger than the theoretical time which elapses between
the counter readout and the compare register write, but that's only
true in theory. A NMI or SMI which hits between the readout and the
write can easily push us beyond that limit. This would result in
waiting for the next HPET timer interrupt until the 32bit wraparound
of the counter happens which takes about 306 seconds.

So we designed the next event function to look like:

   match = read_cnt() + delta;
   write_compare_ref(match);
   return read_cnt() < match ? 0 : -ETIME;

At some point we got into trouble with certain ATI chipsets. Even the
above "safe" procedure failed. The reason was that the write to the
compare register was delayed probably for performance reasons. The
theory was that they wanted to avoid the synchronization of the write
with the HPET clock, which is understandable. So the write does not
hit the compare register directly instead it goes to some intermediate
register which is copied to the real compare register in sync with the
HPET clock. That opens another window for hitting the dreaded "wait
for a wraparound" problem.

To work around that "optimization" we added a read back of the compare
register which either enforced the update of the just written value or
just delayed the readout of the counter enough to avoid the issue. We
unfortunately never got any affirmative info from ATI/AMD about this.

One thing is sure, that we nuked the performance "optimization" that
way completely and I'm pretty sure that the result is worse than
before some HW folks came up with those.

Just for paranoia reasons I added a check whether the read back
compare register value was the same as the value we wrote right
before. That paranoia check triggered a couple of years after it was
added on an Intel ICH9 chipset. Venki added a workaround (commit
8da854c) which was reading the compare register twice when the first
check failed. We considered this to be a penalty in general and
restricted the readback (thus the wasted CPU cycles) to the known to
be affected ATI chipsets.

This turned out to be a utterly wrong decision. 2.6.35 testers
experienced massive problems and finally one of them bisected it down
to commit 30a564be which spured some further investigation.

Finally we got confirmation that the write to the compare register can
be delayed by up to two HPET clock cycles which explains the problems
nicely. All we can do about this is to go back to Venki's initial
workaround in a slightly modified version.

Just for the record I need to say, that all of this could have been
avoided if hardware designers and of course the HPET committee would
have thought about the consequences for a split second. It's out of my
comprehension why designing a working timer is so hard. There are two
ways to achieve it:

 1) Use a counter wrap around aware compare_reg <= counter_reg
    implementation instead of the easy compare_reg == counter_reg

    Downsides:

	- It needs more silicon.

	- It needs a readout of the counter to apply a relative
	  timeout. This is necessary as the counter does not run in
	  any useful (and adjustable) frequency and there is no
	  guarantee that the counter which is used for timer events is
	  the same which is used for reading the actual time (and
	  therefor for calculating the delta)

    Upsides:

	- None

  2) Use a simple down counter for relative timer events

    Downsides:

	- Absolute timeouts are not possible, which is not a problem
	  at all in the context of an OS and the expected
	  max. latencies/jitter (also see Downsides of #1)

   Upsides:

	- It needs less or equal silicon.

	- It works ALWAYS

	- It is way faster than a compare register based solution (One
	  write versus one write plus at least one and up to four
	  reads)

I would not be so grumpy about all of this, if I would not have been
ignored for many years when pointing out these flaws to various
hardware folks. I really hate timers (at least those which seem to be
designed by janitors).

Though finally we got a reasonable explanation plus a solution and I
want to thank all the folks involved in chasing it down and providing
valuable input to this.

Bisected-by: Nix <nix@esperi.org.uk>
Reported-by: Artur Skawina <art.08.09@gmail.com>
Reported-by: Damien Wyart <damien.wyart@free.fr>
Reported-by: John Drescher <drescherjm@gmail.com>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: stable@kernel.org
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/include/asm/hpet.h    |  1 -
 arch/x86/kernel/early-quirks.c | 18 ------------------
 arch/x86/kernel/hpet.c         | 31 +++++++++++++++++--------------
 3 files changed, 17 insertions(+), 33 deletions(-)

diff --git a/arch/x86/include/asm/hpet.h b/arch/x86/include/asm/hpet.h
index 004e6e25e913..1d5c08a1bdfd 100644
--- a/arch/x86/include/asm/hpet.h
+++ b/arch/x86/include/asm/hpet.h
@@ -68,7 +68,6 @@ extern unsigned long force_hpet_address;
 extern u8 hpet_blockid;
 extern int hpet_force_user;
 extern u8 hpet_msi_disable;
-extern u8 hpet_readback_cmp;
 extern int is_hpet_enabled(void);
 extern int hpet_enable(void);
 extern void hpet_disable(void);
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index e5cc7e82e60d..ebdb85cf2686 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,7 +18,6 @@
 #include <asm/apic.h>
 #include <asm/iommu.h>
 #include <asm/gart.h>
-#include <asm/hpet.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -192,21 +191,6 @@ static void __init ati_bugs_contd(int num, int slot, int func)
 }
 #endif
 
-/*
- * Force the read back of the CMP register in hpet_next_event()
- * to work around the problem that the CMP register write seems to be
- * delayed. See hpet_next_event() for details.
- *
- * We do this on all SMBUS incarnations for now until we have more
- * information about the affected chipsets.
- */
-static void __init ati_hpet_bugs(int num, int slot, int func)
-{
-#ifdef CONFIG_HPET_TIMER
-	hpet_readback_cmp = 1;
-#endif
-}
-
 #define QFLAG_APPLY_ONCE 	0x1
 #define QFLAG_APPLIED		0x2
 #define QFLAG_DONE		(QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -236,8 +220,6 @@ static struct chipset early_qrk[] __initdata = {
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
 	{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
-	{ PCI_VENDOR_ID_ATI, PCI_ANY_ID,
-	  PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_hpet_bugs },
 	{}
 };
 
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 351f9c0fea1f..410fdb3f1939 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -35,7 +35,6 @@
 unsigned long				hpet_address;
 u8					hpet_blockid; /* OS timer block num */
 u8					hpet_msi_disable;
-u8					hpet_readback_cmp;
 
 #ifdef CONFIG_PCI_MSI
 static unsigned long			hpet_num_timers;
@@ -395,23 +394,27 @@ static int hpet_next_event(unsigned long delta,
 	 * at that point and we would wait for the next hpet interrupt
 	 * forever. We found out that reading the CMP register back
 	 * forces the transfer so we can rely on the comparison with
-	 * the counter register below.
+	 * the counter register below. If the read back from the
+	 * compare register does not match the value we programmed
+	 * then we might have a real hardware problem. We can not do
+	 * much about it here, but at least alert the user/admin with
+	 * a prominent warning.
 	 *
-	 * That works fine on those ATI chipsets, but on newer Intel
-	 * chipsets (ICH9...) this triggers due to an erratum: Reading
-	 * the comparator immediately following a write is returning
-	 * the old value.
+	 * An erratum on some chipsets (ICH9,..), results in
+	 * comparator read immediately following a write returning old
+	 * value. Workaround for this is to read this value second
+	 * time, when first read returns old value.
 	 *
-	 * We restrict the read back to the affected ATI chipsets (set
-	 * by quirks) and also run it with hpet=verbose for debugging
-	 * purposes.
+	 * In fact the write to the comparator register is delayed up
+	 * to two HPET cycles so the workaround we tried to restrict
+	 * the readback to those known to be borked ATI chipsets
+	 * failed miserably. So we give up on optimizations forever
+	 * and penalize all HPET incarnations unconditionally.
 	 */
-	if (hpet_readback_cmp || hpet_verbose) {
-		u32 cmp = hpet_readl(HPET_Tn_CMP(timer));
-
-		if (cmp != cnt)
+	if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
+		if (hpet_readl(HPET_Tn_CMP(timer)) != cnt)
 			printk_once(KERN_WARNING
-			    "hpet: compare register read back failed.\n");
+				"hpet: compare register read back failed.\n");
 	}
 
 	return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;

From c41d68a513c71e35a14f66d71782d27a79a81ea6 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Tue, 7 Sep 2010 16:16:18 -0700
Subject: [PATCH 352/728] compat: Make compat_alloc_user_space() incorporate
 the access_ok()

compat_alloc_user_space() expects the caller to independently call
access_ok() to verify the returned area.  A missing call could
introduce problems on some architectures.

This patch incorporates the access_ok() check into
compat_alloc_user_space() and also adds a sanity check on the length.
The existing compat_alloc_user_space() implementations are renamed
arch_compat_alloc_user_space() and are used as part of the
implementation of the new global function.

This patch assumes NULL will cause __get_user()/__put_user() to either
fail or access userspace on all architectures.  This should be
followed by checking the return value of compat_access_user_space()
for NULL in the callers, at which time the access_ok() in the callers
can also be removed.

Reported-by: Ben Hawkes <hawkes@sota.gen.nz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <jejb@parisc-linux.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: <stable@kernel.org>
---
 arch/ia64/include/asm/compat.h    |  2 +-
 arch/mips/include/asm/compat.h    |  2 +-
 arch/parisc/include/asm/compat.h  |  2 +-
 arch/powerpc/include/asm/compat.h |  2 +-
 arch/s390/include/asm/compat.h    |  2 +-
 arch/sparc/include/asm/compat.h   |  2 +-
 arch/tile/include/asm/compat.h    |  2 +-
 arch/x86/include/asm/compat.h     |  2 +-
 include/linux/compat.h            |  3 +++
 kernel/compat.c                   | 21 +++++++++++++++++++++
 10 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h
index f90edc85b509..9301a2821615 100644
--- a/arch/ia64/include/asm/compat.h
+++ b/arch/ia64/include/asm/compat.h
@@ -199,7 +199,7 @@ ptr_to_compat(void __user *uptr)
 }
 
 static __inline__ void __user *
-compat_alloc_user_space (long len)
+arch_compat_alloc_user_space (long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 613f6912dfc1..dbc51065df5b 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -145,7 +145,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = (struct pt_regs *)
 		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index 02b77baa5da6..efa0b60c63fe 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -147,7 +147,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static __inline__ void __user *compat_alloc_user_space(long len)
+static __inline__ void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = &current->thread.regs;
 	return (void __user *)regs->gr[30];
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index 396d21a80058..a11d4eac4f97 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -134,7 +134,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = current->thread.regs;
 	unsigned long usp = regs->gpr[1];
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 104f2007f097..a875c2f542e1 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -181,7 +181,7 @@ static inline int is_compat_task(void)
 
 #endif
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	unsigned long stack;
 
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 5016f76ea98a..6f57325bb883 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -167,7 +167,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = current_thread_info()->kregs;
 	unsigned long usp = regs->u_regs[UREG_I6];
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
index 5a34da6cdd79..345d81ce44bb 100644
--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -195,7 +195,7 @@ static inline unsigned long ptr_to_compat_reg(void __user *uptr)
 	return (long)(int)(long __force)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *)regs->sp - len;
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 306160e58b48..1d9cd27c2920 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -205,7 +205,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-static inline void __user *compat_alloc_user_space(long len)
+static inline void __user *arch_compat_alloc_user_space(long len)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return (void __user *)regs->sp - len;
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 9ddc8780e8db..5778b559d59c 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -360,5 +360,8 @@ extern ssize_t compat_rw_copy_check_uvector(int type,
 		const struct compat_iovec __user *uvector, unsigned long nr_segs,
 		unsigned long fast_segs, struct iovec *fast_pointer,
 		struct iovec **ret_pointer);
+
+extern void __user *compat_alloc_user_space(unsigned long len);
+
 #endif /* CONFIG_COMPAT */
 #endif /* _LINUX_COMPAT_H */
diff --git a/kernel/compat.c b/kernel/compat.c
index e167efce8423..c9e2ec0b34a8 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -1126,3 +1126,24 @@ compat_sys_sysinfo(struct compat_sysinfo __user *info)
 
 	return 0;
 }
+
+/*
+ * Allocate user-space memory for the duration of a single system call,
+ * in order to marshall parameters inside a compat thunk.
+ */
+void __user *compat_alloc_user_space(unsigned long len)
+{
+	void __user *ptr;
+
+	/* If len would occupy more than half of the entire compat space... */
+	if (unlikely(len > (((compat_uptr_t)~0) >> 1)))
+		return NULL;
+
+	ptr = arch_compat_alloc_user_space(len);
+
+	if (unlikely(!access_ok(VERIFY_WRITE, ptr, len)))
+		return NULL;
+
+	return ptr;
+}
+EXPORT_SYMBOL_GPL(compat_alloc_user_space);

From 36d001c70d8a0144ac1d038f6876c484849a74de Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Tue, 14 Sep 2010 12:42:41 -0700
Subject: [PATCH 353/728] x86-64, compat: Test %rax for the syscall number, not
 %eax

On 64 bits, we always, by necessity, jump through the system call
table via %rax.  For 32-bit system calls, in theory the system call
number is stored in %eax, and the code was testing %eax for a valid
system call number.  At one point we loaded the stored value back from
the stack to enforce zero-extension, but that was removed in checkin
d4d67150165df8bf1cc05e532f6efca96f907cab.  An actual 32-bit process
will not be able to introduce a non-zero-extended number, but it can
happen via ptrace.

Instead of re-introducing the zero-extension, test what we are
actually going to use, i.e. %rax.  This only adds a handful of REX
prefixes to the code.

Reported-by: Ben Hawkes <hawkes@sota.gen.nz>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@kernel.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
---
 arch/x86/ia32/ia32entry.S | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index b86feabed69b..84e3a4ef9719 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -153,7 +153,7 @@ ENTRY(ia32_sysenter_target)
 	testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz  sysenter_tracesys
-	cmpl	$(IA32_NR_syscalls-1),%eax
+	cmpq	$(IA32_NR_syscalls-1),%rax
 	ja	ia32_badsys
 sysenter_do_call:
 	IA32_ARG_FIXUP
@@ -195,7 +195,7 @@ sysexit_from_sys_call:
 	movl $AUDIT_ARCH_I386,%edi	/* 1st arg: audit arch */
 	call audit_syscall_entry
 	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall number */
-	cmpl $(IA32_NR_syscalls-1),%eax
+	cmpq $(IA32_NR_syscalls-1),%rax
 	ja ia32_badsys
 	movl %ebx,%edi			/* reload 1st syscall arg */
 	movl RCX-ARGOFFSET(%rsp),%esi	/* reload 2nd syscall arg */
@@ -248,7 +248,7 @@ sysenter_tracesys:
 	call	syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
-	cmpl	$(IA32_NR_syscalls-1),%eax
+	cmpq	$(IA32_NR_syscalls-1),%rax
 	ja	int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
 	jmp	sysenter_do_call
 	CFI_ENDPROC
@@ -314,7 +314,7 @@ ENTRY(ia32_cstar_target)
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz   cstar_tracesys
-	cmpl $IA32_NR_syscalls-1,%eax
+	cmpq $IA32_NR_syscalls-1,%rax
 	ja  ia32_badsys
 cstar_do_call:
 	IA32_ARG_FIXUP 1
@@ -367,7 +367,7 @@ cstar_tracesys:
 	LOAD_ARGS32 ARGOFFSET, 1  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
 	xchgl %ebp,%r9d
-	cmpl $(IA32_NR_syscalls-1),%eax
+	cmpq $(IA32_NR_syscalls-1),%rax
 	ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
 	jmp cstar_do_call
 END(ia32_cstar_target)
@@ -425,7 +425,7 @@ ENTRY(ia32_syscall)
 	orl   $TS_COMPAT,TI_status(%r10)
 	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	jnz ia32_tracesys
-	cmpl $(IA32_NR_syscalls-1),%eax
+	cmpq $(IA32_NR_syscalls-1),%rax
 	ja ia32_badsys
 ia32_do_call:
 	IA32_ARG_FIXUP
@@ -444,7 +444,7 @@ ia32_tracesys:
 	call syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
-	cmpl $(IA32_NR_syscalls-1),%eax
+	cmpq $(IA32_NR_syscalls-1),%rax
 	ja  int_ret_from_sys_call	/* ia32_tracesys has set RAX(%rsp) */
 	jmp ia32_do_call
 END(ia32_syscall)

From eefdca043e8391dcd719711716492063030b55ac Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 14 Sep 2010 12:22:58 -0700
Subject: [PATCH 354/728] x86-64, compat: Retruncate rax after ia32 syscall
 entry tracing

In commit d4d6715, we reopened an old hole for a 64-bit ptracer touching a
32-bit tracee in system call entry.  A %rax value set via ptrace at the
entry tracing stop gets used whole as a 32-bit syscall number, while we
only check the low 32 bits for validity.

Fix it by truncating %rax back to 32 bits after syscall_trace_enter,
in addition to testing the full 64 bits as has already been added.

Reported-by: Ben Hawkes <hawkes@sota.gen.nz>
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/ia32/ia32entry.S | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 84e3a4ef9719..518bb99c3394 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -50,7 +50,12 @@
 	/*
 	 * Reload arg registers from stack in case ptrace changed them.
 	 * We don't reload %eax because syscall_trace_enter() returned
-	 * the value it wants us to use in the table lookup.
+	 * the %rax value we should see.  Instead, we just truncate that
+	 * value to 32 bits again as we did on entry from user mode.
+	 * If it's a new value set by user_regset during entry tracing,
+	 * this matches the normal truncation of the user-mode value.
+	 * If it's -1 to make us punt the syscall, then (u32)-1 is still
+	 * an appropriately invalid value.
 	 */
 	.macro LOAD_ARGS32 offset, _r9=0
 	.if \_r9
@@ -60,6 +65,7 @@
 	movl \offset+48(%rsp),%edx
 	movl \offset+56(%rsp),%esi
 	movl \offset+64(%rsp),%edi
+	movl %eax,%eax			/* zero extension */
 	.endm
 	
 	.macro CFI_STARTPROC32 simple

From 460cf3411b858ad509d5255e0dfaf862a83c0299 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Tue, 14 Sep 2010 11:38:24 -0400
Subject: [PATCH 355/728] cifs: fix potential double put of TCP session
 reference

cifs_get_smb_ses must be called on a server pointer on which it holds an
active reference. It first does a search for an existing SMB session. If
it finds one, it'll put the server reference and then try to ensure that
the negprot is done, etc.

If it encounters an error at that point then it'll return an error.
There's a potential problem here though. When cifs_get_smb_ses returns
an error, the caller will also put the TCP server reference leading to a
double-put.

Fix this by having cifs_get_smb_ses only put the server reference if
it found an existing session that it could use and isn't returning an
error.

Cc: stable@kernel.org
Reviewed-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 67dad54fbfa1..88c84a38bccb 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1706,9 +1706,6 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 	if (ses) {
 		cFYI(1, "Existing smb sess found (status=%d)", ses->status);
 
-		/* existing SMB ses has a server reference already */
-		cifs_put_tcp_session(server);
-
 		mutex_lock(&ses->session_mutex);
 		rc = cifs_negotiate_protocol(xid, ses);
 		if (rc) {
@@ -1731,6 +1728,9 @@ cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info)
 			}
 		}
 		mutex_unlock(&ses->session_mutex);
+
+		/* existing SMB ses has a server reference already */
+		cifs_put_tcp_session(server);
 		FreeXid(xid);
 		return ses;
 	}

From 75e1c70fc31490ef8a373ea2a4bea2524099b478 Mon Sep 17 00:00:00 2001
From: Jeff Moyer <jmoyer@redhat.com>
Date: Fri, 10 Sep 2010 14:16:00 -0700
Subject: [PATCH 356/728] aio: check for multiplication overflow in
 do_io_submit
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Tavis Ormandy pointed out that do_io_submit does not do proper bounds
checking on the passed-in iocb array:

       if (unlikely(nr < 0))
               return -EINVAL;

       if (unlikely(!access_ok(VERIFY_READ, iocbpp, (nr*sizeof(iocbpp)))))
               return -EFAULT;                      ^^^^^^^^^^^^^^^^^^

The attached patch checks for overflow, and if it is detected, the
number of iocbs submitted is scaled down to a number that will fit in
the long.  This is an ok thing to do, as sys_io_submit is documented as
returning the number of iocbs submitted, so callers should handle a
return value of less than the 'nr' argument passed in.

Reported-by: Tavis Ormandy <taviso@cmpxchg8b.com>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/aio.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/aio.c b/fs/aio.c
index 3006b5bc33d6..1320b2a05fb2 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1659,6 +1659,9 @@ long do_io_submit(aio_context_t ctx_id, long nr,
 	if (unlikely(nr < 0))
 		return -EINVAL;
 
+	if (unlikely(nr > LONG_MAX/sizeof(*iocbpp)))
+		nr = LONG_MAX/sizeof(*iocbpp);
+
 	if (unlikely(!access_ok(VERIFY_READ, iocbpp, (nr*sizeof(*iocbpp)))))
 		return -EFAULT;
 

From a4128b03ff1ff5bc6ea922518a3f36a09b914379 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Tue, 14 Sep 2010 17:59:15 +0100
Subject: [PATCH 357/728] MN10300: Fix up the IRQ names for the on-chip serial
 ports

Fix up the IRQ names for the MN10300 on-chip serial ports in the driver as
request_interrupt() no longer allows names containing slashes, giving a warning
like the following if one is encountered:

	------------[ cut here ]------------
	WARNING: at fs/proc/generic.c:323 __xlate_proc_name+0x62/0x7c()
	name 'ttySM0/Rx'

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/mn10300-serial.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 9d49073e827a..db509dd80565 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -156,17 +156,17 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = {
 	._intr		= &SC0ICR,
 	._rxb		= &SC0RXB,
 	._txb		= &SC0TXB,
-	.rx_name	= "ttySM0/Rx",
-	.tx_name	= "ttySM0/Tx",
+	.rx_name	= "ttySM0:Rx",
+	.tx_name	= "ttySM0:Tx",
 #ifdef CONFIG_MN10300_TTYSM0_TIMER8
-	.tm_name	= "ttySM0/Timer8",
+	.tm_name	= "ttySM0:Timer8",
 	._tmxmd		= &TM8MD,
 	._tmxbr		= &TM8BR,
 	._tmicr		= &TM8ICR,
 	.tm_irq		= TM8IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_16BIT,
 #else /* CONFIG_MN10300_TTYSM0_TIMER2 */
-	.tm_name	= "ttySM0/Timer2",
+	.tm_name	= "ttySM0:Timer2",
 	._tmxmd		= &TM2MD,
 	._tmxbr		= (volatile u16 *) &TM2BR,
 	._tmicr		= &TM2ICR,
@@ -209,17 +209,17 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = {
 	._intr		= &SC1ICR,
 	._rxb		= &SC1RXB,
 	._txb		= &SC1TXB,
-	.rx_name	= "ttySM1/Rx",
-	.tx_name	= "ttySM1/Tx",
+	.rx_name	= "ttySM1:Rx",
+	.tx_name	= "ttySM1:Tx",
 #ifdef CONFIG_MN10300_TTYSM1_TIMER9
-	.tm_name	= "ttySM1/Timer9",
+	.tm_name	= "ttySM1:Timer9",
 	._tmxmd		= &TM9MD,
 	._tmxbr		= &TM9BR,
 	._tmicr		= &TM9ICR,
 	.tm_irq		= TM9IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_16BIT,
 #else /* CONFIG_MN10300_TTYSM1_TIMER3 */
-	.tm_name	= "ttySM1/Timer3",
+	.tm_name	= "ttySM1:Timer3",
 	._tmxmd		= &TM3MD,
 	._tmxbr		= (volatile u16 *) &TM3BR,
 	._tmicr		= &TM3ICR,
@@ -260,9 +260,9 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = {
 	.uart.lock	=
 	__SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
 	.name		= "ttySM2",
-	.rx_name	= "ttySM2/Rx",
-	.tx_name	= "ttySM2/Tx",
-	.tm_name	= "ttySM2/Timer10",
+	.rx_name	= "ttySM2:Rx",
+	.tx_name	= "ttySM2:Tx",
+	.tm_name	= "ttySM2:Timer10",
 	._iobase	= &SC2CTR,
 	._control	= &SC2CTR,
 	._status	= &SC2STR,

From fe725d4f22f6bd1e7a5e7074bdf53a8fe0a954ee Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Tue, 14 Sep 2010 10:10:47 -0400
Subject: [PATCH 358/728] drm/radeon/kms: only warn on mipmap size checks in
 r600 cs checker (v2)

The texture base address registers are in units of 256 bytes.
The original CS checker treated these offsets as bytes, so the
original check was wrong.  I fixed the units in a patch during
the 2.6.36 cycle, but this ended up breaking some existing
userspace (probably due to a bug in either userspace texture allocation
or the drm texture mipmap checker).  So for now, until we come
up with a better fix, just warn if the mipmap size it too large.
This will keep existing userspace working and it should be just
as safe as before when we were checking the wrong units.  These
are GPU MC addresses, so if they fall outside of the VRAM or
GART apertures, they end up at the GPU default page, so this should
be safe from a security perspective.

v2: Just disable the warning.  It just spams the log and there's
nothing the user can do about it.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <glisse@freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600_cs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index d8864949e387..250a3a918193 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -1170,9 +1170,8 @@ static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 i
 	/* using get ib will give us the offset into the mipmap bo */
 	word0 = radeon_get_ib_value(p, idx + 3) << 8;
 	if ((mipmap_size + word0) > radeon_bo_size(mipmap)) {
-		dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n",
-			w0, h0, bpe, blevel, nlevels, word0, mipmap_size, radeon_bo_size(texture));
-		return -EINVAL;
+		/*dev_warn(p->dev, "mipmap bo too small (%d %d %d %d %d %d -> %d have %ld)\n",
+		  w0, h0, bpe, blevel, nlevels, word0, mipmap_size, radeon_bo_size(texture));*/
 	}
 	return 0;
 }

From e75e863dd5c7d96b91ebbd241da5328fc38a78cc Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue, 14 Sep 2010 16:35:14 +0200
Subject: [PATCH 359/728] sched: Fix user time incorrectly accounted as system
 time on 32-bit

We have 32-bit variable overflow possibility when multiply in
task_times() and thread_group_times() functions. When the
overflow happens then the scaled utime value becomes erroneously
small and the scaled stime becomes i erroneously big.

Reported here:

 https://bugzilla.redhat.com/show_bug.cgi?id=633037
 https://bugzilla.kernel.org/show_bug.cgi?id=16559

Reported-by: Michael Chapman <redhat-bugzilla@very.puzzling.org>
Reported-by: Ciriaco Garcia de Celis <sysman@etherpilot.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: <stable@kernel.org>  # 2.6.32.19+ (partially) and 2.6.33+
LKML-Reference: <20100914143513.GB8415@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index ed09d4f2a69c..dc85ceb90832 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3513,9 +3513,9 @@ void task_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 	rtime = nsecs_to_cputime(p->se.sum_exec_runtime);
 
 	if (total) {
-		u64 temp;
+		u64 temp = rtime;
 
-		temp = (u64)(rtime * utime);
+		temp *= utime;
 		do_div(temp, total);
 		utime = (cputime_t)temp;
 	} else
@@ -3546,9 +3546,9 @@ void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *st)
 	rtime = nsecs_to_cputime(cputime.sum_exec_runtime);
 
 	if (total) {
-		u64 temp;
+		u64 temp = rtime;
 
-		temp = (u64)(rtime * cputime.utime);
+		temp *= cputime.utime;
 		do_div(temp, total);
 		utime = (cputime_t)temp;
 	} else

From e6e6c46d759cd013cb57eba112a4129a3a353c4b Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 15 Sep 2010 11:16:05 -0400
Subject: [PATCH 360/728] arch/tile: finish const-ifying sys_execve()

The sys_execve() implementation was properly const-ified but not
the declaration, the syscall wrappers, or the compat version.
This change completes the constification process.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/include/asm/compat.h   |  5 +++--
 arch/tile/include/asm/syscalls.h | 21 +++++++++++++--------
 arch/tile/kernel/process.c       |  5 +++--
 3 files changed, 19 insertions(+), 12 deletions(-)

diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
index 5a34da6cdd79..070ad0a5ef1c 100644
--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -214,8 +214,9 @@ extern int compat_setup_rt_frame(int sig, struct k_sigaction *ka,
 struct compat_sigaction;
 struct compat_siginfo;
 struct compat_sigaltstack;
-long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
-		       compat_uptr_t __user *envp);
+long compat_sys_execve(const char __user *path,
+		       const compat_uptr_t __user *argv,
+		       const compat_uptr_t __user *envp);
 long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
 			     struct compat_sigaction __user *oact,
 			     size_t sigsetsize);
diff --git a/arch/tile/include/asm/syscalls.h b/arch/tile/include/asm/syscalls.h
index af165a74537f..ce99ffefeacf 100644
--- a/arch/tile/include/asm/syscalls.h
+++ b/arch/tile/include/asm/syscalls.h
@@ -62,10 +62,12 @@ long sys_fork(void);
 long _sys_fork(struct pt_regs *regs);
 long sys_vfork(void);
 long _sys_vfork(struct pt_regs *regs);
-long sys_execve(char __user *filename, char __user * __user *argv,
-		char __user * __user *envp);
-long _sys_execve(char __user *filename, char __user * __user *argv,
-		 char __user * __user *envp, struct pt_regs *regs);
+long sys_execve(const char __user *filename,
+		const char __user *const __user *argv,
+		const char __user *const __user *envp);
+long _sys_execve(const char __user *filename,
+		 const char __user *const __user *argv,
+		 const char __user *const __user *envp, struct pt_regs *regs);
 
 /* kernel/signal.c */
 long sys_sigaltstack(const stack_t __user *, stack_t __user *);
@@ -86,10 +88,13 @@ int _sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *);
 #endif
 
 #ifdef CONFIG_COMPAT
-long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
-		       compat_uptr_t __user *envp);
-long _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
-			compat_uptr_t __user *envp, struct pt_regs *regs);
+long compat_sys_execve(const char __user *path,
+		       const compat_uptr_t __user *argv,
+		       const compat_uptr_t __user *envp);
+long _compat_sys_execve(const char __user *path,
+			const compat_uptr_t __user *argv,
+			const compat_uptr_t __user *envp,
+			struct pt_regs *regs);
 long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
 			    struct compat_sigaltstack __user *uoss_ptr);
 long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 985cc28c74c5..88be49e3aa25 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -561,8 +561,9 @@ out:
 }
 
 #ifdef CONFIG_COMPAT
-long _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
-			compat_uptr_t __user *envp, struct pt_regs *regs)
+long _compat_sys_execve(const char __user *path,
+			const compat_uptr_t __user *argv,
+			const compat_uptr_t __user *envp, struct pt_regs *regs)
 {
 	long error;
 	char *filename;

From 74fca9da097b74117ae2cef9e5f0d9b0e28ccbb7 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 15 Sep 2010 11:16:08 -0400
Subject: [PATCH 361/728] arch/tile: Change struct sigcontext to be more useful

Rather than just using pt_regs, it now contains the actual saved
state explicitly, similar to pt_regs.  By doing it this way, we
provide a cleaner API for userspace (or equivalently, we avoid the
need for libc to provide its own definition of sigcontext).

While we're at it, move PT_FLAGS_xxx to where they are not visible
from userspace.  And always pass siginfo and mcontext to signal
handlers, even if they claim they don't need it, since sometimes
they actually try to use it anyway in practice.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/include/asm/ptrace.h     | 15 ++++++---------
 arch/tile/include/asm/sigcontext.h | 18 +++++++++++++-----
 arch/tile/include/asm/signal.h     |  1 +
 arch/tile/kernel/signal.c          | 27 +++++++++++++++------------
 arch/tile/kernel/stack.c           |  2 +-
 5 files changed, 36 insertions(+), 27 deletions(-)

diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
index acdae814e016..4a02bb073979 100644
--- a/arch/tile/include/asm/ptrace.h
+++ b/arch/tile/include/asm/ptrace.h
@@ -51,10 +51,7 @@ typedef uint_reg_t pt_reg_t;
 
 /*
  * This struct defines the way the registers are stored on the stack during a
- * system call/exception.  It should be a multiple of 8 bytes to preserve
- * normal stack alignment rules.
- *
- * Must track <sys/ucontext.h> and <sys/procfs.h>
+ * system call or exception.  "struct sigcontext" has the same shape.
  */
 struct pt_regs {
 	/* Saved main processor registers; 56..63 are special. */
@@ -80,11 +77,6 @@ struct pt_regs {
 
 #endif /* __ASSEMBLY__ */
 
-/* Flag bits in pt_regs.flags */
-#define PT_FLAGS_DISABLE_IRQ    1  /* on return to kernel, disable irqs */
-#define PT_FLAGS_CALLER_SAVES   2  /* caller-save registers are valid */
-#define PT_FLAGS_RESTORE_REGS   4  /* restore callee-save regs on return */
-
 #define PTRACE_GETREGS		12
 #define PTRACE_SETREGS		13
 #define PTRACE_GETFPREGS	14
@@ -101,6 +93,11 @@ struct pt_regs {
 
 #ifdef __KERNEL__
 
+/* Flag bits in pt_regs.flags */
+#define PT_FLAGS_DISABLE_IRQ    1  /* on return to kernel, disable irqs */
+#define PT_FLAGS_CALLER_SAVES   2  /* caller-save registers are valid */
+#define PT_FLAGS_RESTORE_REGS   4  /* restore callee-save regs on return */
+
 #ifndef __ASSEMBLY__
 
 #define instruction_pointer(regs) ((regs)->pc)
diff --git a/arch/tile/include/asm/sigcontext.h b/arch/tile/include/asm/sigcontext.h
index 7cd7672e3ad4..5e2d03336f53 100644
--- a/arch/tile/include/asm/sigcontext.h
+++ b/arch/tile/include/asm/sigcontext.h
@@ -15,13 +15,21 @@
 #ifndef _ASM_TILE_SIGCONTEXT_H
 #define _ASM_TILE_SIGCONTEXT_H
 
-/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */
-#include <asm/ptrace.h>
-
-/* Must track <sys/ucontext.h> */
+#include <arch/abi.h>
 
+/*
+ * struct sigcontext has the same shape as struct pt_regs,
+ * but is simplified since we know the fault is from userspace.
+ */
 struct sigcontext {
-	struct pt_regs regs;
+	uint_reg_t gregs[53];	/* General-purpose registers.  */
+	uint_reg_t tp;		/* Aliases gregs[TREG_TP].  */
+	uint_reg_t sp;		/* Aliases gregs[TREG_SP].  */
+	uint_reg_t lr;		/* Aliases gregs[TREG_LR].  */
+	uint_reg_t pc;		/* Program counter.  */
+	uint_reg_t ics;		/* In Interrupt Critical Section?  */
+	uint_reg_t faultnum;	/* Fault number.  */
+	uint_reg_t pad[5];
 };
 
 #endif /* _ASM_TILE_SIGCONTEXT_H */
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
index eb0253f32202..c1ee1d61d44c 100644
--- a/arch/tile/include/asm/signal.h
+++ b/arch/tile/include/asm/signal.h
@@ -24,6 +24,7 @@
 #include <asm-generic/signal.h>
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+struct pt_regs;
 int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
 int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
 void do_signal(struct pt_regs *regs);
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 45b66a3c991f..ce183aa1492c 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -61,13 +61,19 @@ int restore_sigcontext(struct pt_regs *regs,
 	/* Always make any pending restarted system calls return -EINTR */
 	current_thread_info()->restart_block.fn = do_no_restart_syscall;
 
+	/*
+	 * Enforce that sigcontext is like pt_regs, and doesn't mess
+	 * up our stack alignment rules.
+	 */
+	BUILD_BUG_ON(sizeof(struct sigcontext) != sizeof(struct pt_regs));
+	BUILD_BUG_ON(sizeof(struct sigcontext) % 8 != 0);
+
 	for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
-		err |= __get_user(((long *)regs)[i],
-				  &((long __user *)(&sc->regs))[i]);
+		err |= __get_user(regs->regs[i], &sc->gregs[i]);
 
 	regs->faultnum = INT_SWINT_1_SIGRETURN;
 
-	err |= __get_user(*pr0, &sc->regs.regs[0]);
+	err |= __get_user(*pr0, &sc->gregs[0]);
 	return err;
 }
 
@@ -112,8 +118,7 @@ int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	int i, err = 0;
 
 	for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
-		err |= __put_user(((long *)regs)[i],
-				  &((long __user *)(&sc->regs))[i]);
+		err |= __put_user(regs->regs[i], &sc->gregs[i]);
 
 	return err;
 }
@@ -203,19 +208,17 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 * Set up registers for signal handler.
 	 * Registers that we don't modify keep the value they had from
 	 * user-space at the time we took the signal.
+	 * We always pass siginfo and mcontext, regardless of SA_SIGINFO,
+	 * since some things rely on this (e.g. glibc's debug/segfault.c).
 	 */
 	regs->pc = (unsigned long) ka->sa.sa_handler;
 	regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
 	regs->sp = (unsigned long) frame;
 	regs->lr = restorer;
 	regs->regs[0] = (unsigned long) usig;
-
-	if (ka->sa.sa_flags & SA_SIGINFO) {
-		/* Need extra arguments, so mark to restore caller-saves. */
-		regs->regs[1] = (unsigned long) &frame->info;
-		regs->regs[2] = (unsigned long) &frame->uc;
-		regs->flags |= PT_FLAGS_CALLER_SAVES;
-	}
+	regs->regs[1] = (unsigned long) &frame->info;
+	regs->regs[2] = (unsigned long) &frame->uc;
+	regs->flags |= PT_FLAGS_CALLER_SAVES;
 
 	/*
 	 * Notify any tracer that was single-stepping it.
diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c
index 38a68b0b4581..ea2e0ce28380 100644
--- a/arch/tile/kernel/stack.c
+++ b/arch/tile/kernel/stack.c
@@ -175,7 +175,7 @@ static struct pt_regs *valid_sigframe(struct KBacktraceIterator* kbt)
 			pr_err("  <received signal %d>\n",
 			       frame->info.si_signo);
 		}
-		return &frame->uc.uc_mcontext.regs;
+		return (struct pt_regs *)&frame->uc.uc_mcontext;
 	}
 	return NULL;
 }

From a802fc685426303ab627b7ad3fd5c97b5dea7e00 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 15 Sep 2010 11:16:10 -0400
Subject: [PATCH 362/728] arch/tile: Save and restore extra user state for
 tilegx

During context switch, save and restore a couple of additional bits of
tilegx user state that can be persistently modified by userspace.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/include/arch/chip_tile64.h  |  3 +++
 arch/tile/include/arch/chip_tilepro.h |  3 +++
 arch/tile/include/asm/processor.h     | 12 ++++++++++++
 arch/tile/kernel/process.c            | 23 ++++++++++++++++-------
 4 files changed, 34 insertions(+), 7 deletions(-)

diff --git a/arch/tile/include/arch/chip_tile64.h b/arch/tile/include/arch/chip_tile64.h
index 1246573be59e..261aaba092d4 100644
--- a/arch/tile/include/arch/chip_tile64.h
+++ b/arch/tile/include/arch/chip_tile64.h
@@ -150,6 +150,9 @@
 /** Is the PROC_STATUS SPR supported? */
 #define CHIP_HAS_PROC_STATUS_SPR() 0
 
+/** Is the DSTREAM_PF SPR supported? */
+#define CHIP_HAS_DSTREAM_PF() 0
+
 /** Log of the number of mshims we have. */
 #define CHIP_LOG_NUM_MSHIMS() 2
 
diff --git a/arch/tile/include/arch/chip_tilepro.h b/arch/tile/include/arch/chip_tilepro.h
index e864c47fc89c..70017699a74c 100644
--- a/arch/tile/include/arch/chip_tilepro.h
+++ b/arch/tile/include/arch/chip_tilepro.h
@@ -150,6 +150,9 @@
 /** Is the PROC_STATUS SPR supported? */
 #define CHIP_HAS_PROC_STATUS_SPR() 1
 
+/** Is the DSTREAM_PF SPR supported? */
+#define CHIP_HAS_DSTREAM_PF() 0
+
 /** Log of the number of mshims we have. */
 #define CHIP_LOG_NUM_MSHIMS() 2
 
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index d942d09b252e..ccd5f8425688 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -103,6 +103,18 @@ struct thread_struct {
 	/* Any other miscellaneous processor state bits */
 	unsigned long proc_status;
 #endif
+#if !CHIP_HAS_FIXED_INTVEC_BASE()
+	/* Interrupt base for PL0 interrupts */
+	unsigned long interrupt_vector_base;
+#endif
+#if CHIP_HAS_TILE_RTF_HWM()
+	/* Tile cache retry fifo high-water mark */
+	unsigned long tile_rtf_hwm;
+#endif
+#if CHIP_HAS_DSTREAM_PF()
+	/* Data stream prefetch control */
+	unsigned long dstream_pf;
+#endif
 #ifdef CONFIG_HARDWALL
 	/* Is this task tied to an activated hardwall? */
 	struct hardwall_info *hardwall;
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 88be49e3aa25..c37b6e3873c1 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -408,6 +408,15 @@ static void save_arch_state(struct thread_struct *t)
 #if CHIP_HAS_PROC_STATUS_SPR()
 	t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
 #endif
+#if !CHIP_HAS_FIXED_INTVEC_BASE()
+	t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0);
+#endif
+#if CHIP_HAS_TILE_RTF_HWM()
+	t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM);
+#endif
+#if CHIP_HAS_DSTREAM_PF()
+	t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF);
+#endif
 }
 
 static void restore_arch_state(const struct thread_struct *t)
@@ -428,14 +437,14 @@ static void restore_arch_state(const struct thread_struct *t)
 #if CHIP_HAS_PROC_STATUS_SPR()
 	__insn_mtspr(SPR_PROC_STATUS, t->proc_status);
 #endif
+#if !CHIP_HAS_FIXED_INTVEC_BASE()
+	__insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base);
+#endif
 #if CHIP_HAS_TILE_RTF_HWM()
-	/*
-	 * Clear this whenever we switch back to a process in case
-	 * the previous process was monkeying with it.  Even if enabled
-	 * in CBOX_MSR1 via TILE_RTF_HWM_MIN, it's still just a
-	 * performance hint, so isn't worth a full save/restore.
-	 */
-	__insn_mtspr(SPR_TILE_RTF_HWM, 0);
+	__insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm);
+#endif
+#if CHIP_HAS_DSTREAM_PF()
+	__insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf);
 #endif
 }
 

From 0fab59e5ddb4e0557825e9ab8e41b66b5f336941 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 15 Sep 2010 11:17:04 -0400
Subject: [PATCH 363/728] arch/tile: fix memcpy_fromio()/memcpy_toio()
 signatures

This tripped up a driver (not yet committed to git).  Fix it now.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/include/asm/io.h | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index 8c95bef3fa45..ee43328713ab 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -164,22 +164,22 @@ static inline void _tile_writeq(u64 val, unsigned long addr)
 #define iowrite32 writel
 #define iowrite64 writeq
 
-static inline void *memcpy_fromio(void *dst, void *src, int len)
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
+				 size_t len)
 {
 	int x;
 	BUG_ON((unsigned long)src & 0x3);
 	for (x = 0; x < len; x += 4)
 		*(u32 *)(dst + x) = readl(src + x);
-	return dst;
 }
 
-static inline void *memcpy_toio(void *dst, void *src, int len)
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
+				size_t len)
 {
 	int x;
 	BUG_ON((unsigned long)dst & 0x3);
 	for (x = 0; x < len; x += 4)
 		writel(*(u32 *)(src + x), dst + x);
-	return dst;
 }
 
 /*

From 7040dea4d2a0609241c7a98a944b7c432c69db2e Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Wed, 15 Sep 2010 11:17:05 -0400
Subject: [PATCH 364/728] arch/tile: fix formatting bug in register dumps

This cut-and-paste bug was caused by rewriting the register dump
code to use only a single printk per line of output.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index c37b6e3873c1..84c29111756c 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -667,7 +667,7 @@ void show_regs(struct pt_regs *regs)
 	       regs->regs[51], regs->regs[52], regs->tp);
 	pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr);
 #else
-	for (i = 0; i < 52; i += 3)
+	for (i = 0; i < 52; i += 4)
 		pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT
 		       " r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
 		       i, regs->regs[i], i+1, regs->regs[i+1],

From c494bc6c534c78fac2d308ad38073b9226448b0d Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Mon, 30 Aug 2010 08:18:54 +0200
Subject: [PATCH 365/728] pcmcia serial_cs.c: fix multifunction card handling

We shouldn't overwrite pre-set values, and we should also
set the port address to the beginning, and not the end of
the 8-port range.

CC: linux-serial@vger.kernel.org
Reported-by: Komuro <komurojun-mbn@nifty.com>
Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/serial/serial_cs.c | 62 ++++++++++++++++++++++----------------
 1 file changed, 36 insertions(+), 26 deletions(-)

diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 141c69554bd4..7d475b2a79e8 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -335,8 +335,6 @@ static int serial_probe(struct pcmcia_device *link)
 	info->p_dev = link;
 	link->priv = info;
 
-	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-	link->resource[0]->end = 8;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
 	if (do_sound) {
 		link->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -411,6 +409,27 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
 
 /*====================================================================*/
 
+static int pfc_config(struct pcmcia_device *p_dev)
+{
+	unsigned int port = 0;
+	struct serial_info *info = p_dev->priv;
+
+	if ((p_dev->resource[1]->end != 0) &&
+		(resource_size(p_dev->resource[1]) == 8)) {
+		port = p_dev->resource[1]->start;
+		info->slave = 1;
+	} else if ((info->manfid == MANFID_OSITECH) &&
+		(resource_size(p_dev->resource[0]) == 0x40)) {
+		port = p_dev->resource[0]->start + 0x28;
+		info->slave = 1;
+	}
+	if (info->slave)
+		return setup_serial(p_dev, info, port, p_dev->irq);
+
+	dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
+	return -ENODEV;
+}
+
 static int simple_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cf,
 			       cistpl_cftable_entry_t *dflt,
@@ -461,23 +480,8 @@ static int simple_config(struct pcmcia_device *link)
 	struct serial_info *info = link->priv;
 	int i = -ENODEV, try;
 
-	/* If the card is already configured, look up the port and irq */
-	if (link->function_config) {
-		unsigned int port = 0;
-		if ((link->resource[1]->end != 0) &&
-			(resource_size(link->resource[1]) == 8)) {
-			port = link->resource[1]->end;
-			info->slave = 1;
-		} else if ((info->manfid == MANFID_OSITECH) &&
-			(resource_size(link->resource[0]) == 0x40)) {
-			port = link->resource[0]->start + 0x28;
-			info->slave = 1;
-		}
-		if (info->slave) {
-			return setup_serial(link, info, port,
-					    link->irq);
-		}
-	}
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+	link->resource[0]->end = 8;
 
 	/* First pass: look for a config entry that looks normal.
 	 * Two tries: without IO aliases, then with aliases */
@@ -491,8 +495,7 @@ static int simple_config(struct pcmcia_device *link)
 	if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
 		goto found_port;
 
-	printk(KERN_NOTICE
-	       "serial_cs: no usable port range found, giving up\n");
+	dev_warn(&link->dev, "no usable port range found, giving up\n");
 	return -1;
 
 found_port:
@@ -558,6 +561,7 @@ static int multi_config(struct pcmcia_device *link)
 	int i, base2 = 0;
 
 	/* First, look for a generic full-sized window */
+	link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 	link->resource[0]->end = info->multi * 8;
 	if (pcmcia_loop_config(link, multi_config_check, &base2)) {
 		/* If that didn't work, look for two windows */
@@ -565,15 +569,14 @@ static int multi_config(struct pcmcia_device *link)
 		info->multi = 2;
 		if (pcmcia_loop_config(link, multi_config_check_notpicky,
 				       &base2)) {
-			printk(KERN_NOTICE "serial_cs: no usable port range"
+			dev_warn(&link->dev, "no usable port range "
 			       "found, giving up\n");
 			return -ENODEV;
 		}
 	}
 
 	if (!link->irq)
-		dev_warn(&link->dev,
-			"serial_cs: no usable IRQ found, continuing...\n");
+		dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
 
 	/*
 	 * Apply any configuration quirks.
@@ -675,6 +678,7 @@ static int serial_config(struct pcmcia_device * link)
 	   multifunction cards that ask for appropriate IO port ranges */
 	if ((info->multi == 0) &&
 	    (link->has_func_id) &&
+	    (link->socket->pcmcia_pfc == 0) &&
 	    ((link->func_id == CISTPL_FUNCID_MULTI) ||
 	     (link->func_id == CISTPL_FUNCID_SERIAL)))
 		pcmcia_loop_config(link, serial_check_for_multi, info);
@@ -685,7 +689,13 @@ static int serial_config(struct pcmcia_device * link)
 	if (info->quirk && info->quirk->multi != -1)
 		info->multi = info->quirk->multi;
 
-	if (info->multi > 1)
+	dev_info(&link->dev,
+		"trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
+		link->manf_id, link->card_id,
+		link->socket->pcmcia_pfc, info->multi, info->quirk);
+	if (link->socket->pcmcia_pfc)
+		i = pfc_config(link);
+	else if (info->multi > 1)
 		i = multi_config(link);
 	else
 		i = simple_config(link);
@@ -704,7 +714,7 @@ static int serial_config(struct pcmcia_device * link)
 	return 0;
 
 failed:
-	dev_warn(&link->dev, "serial_cs: failed to initialize\n");
+	dev_warn(&link->dev, "failed to initialize\n");
 	serial_remove(link);
 	return -ENODEV;
 }

From eb838fe109b8f51ba590802761753a2631c3f7f0 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Mon, 13 Sep 2010 16:51:36 +0200
Subject: [PATCH 366/728] pcmcia: per-device, not per-socket debug messages

As the iomem / ioport setup differs per device, it is much better
to print out the device instead of the socket.

Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/pcmcia_resource.c | 51 +++++++++++++++++---------------
 1 file changed, 27 insertions(+), 24 deletions(-)

diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 54aa1c238cb3..a5c176598d95 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -163,7 +163,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev,
 	c = p_dev->function_config;
 
 	if (!(c->state & CONFIG_LOCKED)) {
-		dev_dbg(&s->dev, "Configuration isnt't locked\n");
+		dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
 		mutex_unlock(&s->ops_mutex);
 		return -EACCES;
 	}
@@ -220,7 +220,7 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh,
 	s->win[w].card_start = offset;
 	ret = s->ops->set_mem_map(s, &s->win[w]);
 	if (ret)
-		dev_warn(&s->dev, "failed to set_mem_map\n");
+		dev_warn(&p_dev->dev, "failed to set_mem_map\n");
 	mutex_unlock(&s->ops_mutex);
 	return ret;
 } /* pcmcia_map_mem_page */
@@ -244,18 +244,18 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 	c = p_dev->function_config;
 
 	if (!(s->state & SOCKET_PRESENT)) {
-		dev_dbg(&s->dev, "No card present\n");
+		dev_dbg(&p_dev->dev, "No card present\n");
 		ret = -ENODEV;
 		goto unlock;
 	}
 	if (!(c->state & CONFIG_LOCKED)) {
-		dev_dbg(&s->dev, "Configuration isnt't locked\n");
+		dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
 		ret = -EACCES;
 		goto unlock;
 	}
 
 	if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) {
-		dev_dbg(&s->dev,
+		dev_dbg(&p_dev->dev,
 			"changing Vcc or IRQ is not allowed at this time\n");
 		ret = -EINVAL;
 		goto unlock;
@@ -265,20 +265,22 @@ int pcmcia_modify_configuration(struct pcmcia_device *p_dev,
 	if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) &&
 	    (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
 		if (mod->Vpp1 != mod->Vpp2) {
-			dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n");
+			dev_dbg(&p_dev->dev,
+				"Vpp1 and Vpp2 must be the same\n");
 			ret = -EINVAL;
 			goto unlock;
 		}
 		s->socket.Vpp = mod->Vpp1;
 		if (s->ops->set_socket(s, &s->socket)) {
-			dev_printk(KERN_WARNING, &s->dev,
+			dev_printk(KERN_WARNING, &p_dev->dev,
 				   "Unable to set VPP\n");
 			ret = -EIO;
 			goto unlock;
 		}
 	} else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) ||
 		   (mod->Attributes & CONF_VPP2_CHANGE_VALID)) {
-		dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n");
+		dev_dbg(&p_dev->dev,
+			"changing Vcc is not allowed at this time\n");
 		ret = -EINVAL;
 		goto unlock;
 	}
@@ -401,7 +403,7 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res)
 	win = &s->win[w];
 
 	if (!(p_dev->_win & CLIENT_WIN_REQ(w))) {
-		dev_dbg(&s->dev, "not releasing unknown window\n");
+		dev_dbg(&p_dev->dev, "not releasing unknown window\n");
 		mutex_unlock(&s->ops_mutex);
 		return -EINVAL;
 	}
@@ -439,7 +441,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 		return -ENODEV;
 
 	if (req->IntType & INT_CARDBUS) {
-		dev_dbg(&s->dev, "IntType may not be INT_CARDBUS\n");
+		dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n");
 		return -EINVAL;
 	}
 
@@ -447,7 +449,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	c = p_dev->function_config;
 	if (c->state & CONFIG_LOCKED) {
 		mutex_unlock(&s->ops_mutex);
-		dev_dbg(&s->dev, "Configuration is locked\n");
+		dev_dbg(&p_dev->dev, "Configuration is locked\n");
 		return -EACCES;
 	}
 
@@ -455,7 +457,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev,
 	s->socket.Vpp = req->Vpp;
 	if (s->ops->set_socket(s, &s->socket)) {
 		mutex_unlock(&s->ops_mutex);
-		dev_printk(KERN_WARNING, &s->dev,
+		dev_printk(KERN_WARNING, &p_dev->dev,
 			   "Unable to set socket state\n");
 		return -EINVAL;
 	}
@@ -569,19 +571,20 @@ int pcmcia_request_io(struct pcmcia_device *p_dev)
 	int ret = -EINVAL;
 
 	mutex_lock(&s->ops_mutex);
-	dev_dbg(&s->dev, "pcmcia_request_io: %pR , %pR", &c->io[0], &c->io[1]);
+	dev_dbg(&p_dev->dev, "pcmcia_request_io: %pR , %pR",
+		&c->io[0], &c->io[1]);
 
 	if (!(s->state & SOCKET_PRESENT)) {
-		dev_dbg(&s->dev, "pcmcia_request_io: No card present\n");
+		dev_dbg(&p_dev->dev, "pcmcia_request_io: No card present\n");
 		goto out;
 	}
 
 	if (c->state & CONFIG_LOCKED) {
-		dev_dbg(&s->dev, "Configuration is locked\n");
+		dev_dbg(&p_dev->dev, "Configuration is locked\n");
 		goto out;
 	}
 	if (c->state & CONFIG_IO_REQ) {
-		dev_dbg(&s->dev, "IO already configured\n");
+		dev_dbg(&p_dev->dev, "IO already configured\n");
 		goto out;
 	}
 
@@ -601,7 +604,7 @@ int pcmcia_request_io(struct pcmcia_device *p_dev)
 	c->state |= CONFIG_IO_REQ;
 	p_dev->_io = 1;
 
-	dev_dbg(&s->dev, "pcmcia_request_io succeeded: %pR , %pR",
+	dev_dbg(&p_dev->dev, "pcmcia_request_io succeeded: %pR , %pR",
 		&c->io[0], &c->io[1]);
 out:
 	mutex_unlock(&s->ops_mutex);
@@ -800,7 +803,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	int w;
 
 	if (!(s->state & SOCKET_PRESENT)) {
-		dev_dbg(&s->dev, "No card present\n");
+		dev_dbg(&p_dev->dev, "No card present\n");
 		return -ENODEV;
 	}
 
@@ -809,12 +812,12 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 		req->Size = s->map_size;
 	align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size;
 	if (req->Size & (s->map_size-1)) {
-		dev_dbg(&s->dev, "invalid map size\n");
+		dev_dbg(&p_dev->dev, "invalid map size\n");
 		return -EINVAL;
 	}
 	if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) ||
 	    (req->Base & (align-1))) {
-		dev_dbg(&s->dev, "invalid base address\n");
+		dev_dbg(&p_dev->dev, "invalid base address\n");
 		return -EINVAL;
 	}
 	if (req->Base)
@@ -826,7 +829,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 		if (!(s->state & SOCKET_WIN_REQ(w)))
 			break;
 	if (w == MAX_WIN) {
-		dev_dbg(&s->dev, "all windows are used already\n");
+		dev_dbg(&p_dev->dev, "all windows are used already\n");
 		mutex_unlock(&s->ops_mutex);
 		return -EINVAL;
 	}
@@ -837,7 +840,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 		win->res = pcmcia_find_mem_region(req->Base, req->Size, align,
 						0, s);
 		if (!win->res) {
-			dev_dbg(&s->dev, "allocating mem region failed\n");
+			dev_dbg(&p_dev->dev, "allocating mem region failed\n");
 			mutex_unlock(&s->ops_mutex);
 			return -EINVAL;
 		}
@@ -851,7 +854,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	win->card_start = 0;
 
 	if (s->ops->set_mem_map(s, win) != 0) {
-		dev_dbg(&s->dev, "failed to set memory mapping\n");
+		dev_dbg(&p_dev->dev, "failed to set memory mapping\n");
 		mutex_unlock(&s->ops_mutex);
 		return -EIO;
 	}
@@ -874,7 +877,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha
 	if (win->res)
 		request_resource(&iomem_resource, res);
 
-	dev_dbg(&s->dev, "request_window results in %pR\n", res);
+	dev_dbg(&p_dev->dev, "request_window results in %pR\n", res);
 
 	mutex_unlock(&s->ops_mutex);
 	*wh = res;

From b76dc0546709aef18f123847680108c2fd33f203 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Mon, 13 Sep 2010 20:23:12 +0200
Subject: [PATCH 367/728] pcmcia pcnet_cs: try setting io_lines to 16 if card
 setup fails

Some pcnet_cs compatible cards require an exact 16-lines match
of the ioport areas specified in CIS, but set the "iolines"
value in the CIS incorrectly. We can easily work around this
issue -- same as we do in serial_cs -- by first trying setting
iolines to the CIS-specified value, and then trying a 16-line
match.

Reported-and-tested-by: Wolfram Sang <w.sang@pengutronix.de>
Hardware-supplied-by: Jochen Frieling <j.frieling@pengutronix.de>
CC: netdev@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/net/pcmcia/pcnet_cs.c | 139 ++++++++++++++++++++--------------
 1 file changed, 83 insertions(+), 56 deletions(-)

diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 49279b0ee526..f9b509a6b09a 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -508,7 +508,8 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
 			   unsigned int vcc,
 			   void *priv_data)
 {
-	int *has_shmem = priv_data;
+	int *priv = priv_data;
+	int try = (*priv & 0x1);
 	int i;
 	cistpl_io_t *io = &cfg->io;
 
@@ -525,77 +526,103 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev,
 		i = p_dev->resource[1]->end = 0;
 	}
 
-	*has_shmem = ((cfg->mem.nwin == 1) &&
-		      (cfg->mem.win[0].len >= 0x4000));
+	*priv &= ((cfg->mem.nwin == 1) &&
+		  (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
+
 	p_dev->resource[0]->start = io->win[i].base;
 	p_dev->resource[0]->end = io->win[i].len;
-	p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+	if (!try)
+		p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
+	else
+		p_dev->io_lines = 16;
 	if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
 		return try_io_port(p_dev);
 
-	return 0;
+	return -EINVAL;
+}
+
+static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
+				   int *has_shmem, int try)
+{
+	struct net_device *dev = link->priv;
+	hw_info_t *local_hw_info;
+	pcnet_dev_t *info = PRIV(dev);
+	int priv = try;
+	int ret;
+
+	ret = pcmcia_loop_config(link, pcnet_confcheck, &priv);
+	if (ret) {
+		dev_warn(&link->dev, "no useable port range found\n");
+		return NULL;
+	}
+	*has_shmem = (priv & 0x10);
+
+	if (!link->irq)
+		return NULL;
+
+	if (resource_size(link->resource[1]) == 8) {
+		link->conf.Attributes |= CONF_ENABLE_SPKR;
+		link->conf.Status = CCSR_AUDIO_ENA;
+	}
+	if ((link->manf_id == MANFID_IBM) &&
+	    (link->card_id == PRODID_IBM_HOME_AND_AWAY))
+		link->conf.ConfigIndex |= 0x10;
+
+	ret = pcmcia_request_configuration(link, &link->conf);
+	if (ret)
+		return NULL;
+
+	dev->irq = link->irq;
+	dev->base_addr = link->resource[0]->start;
+
+	if (info->flags & HAS_MISC_REG) {
+		if ((if_port == 1) || (if_port == 2))
+			dev->if_port = if_port;
+		else
+			dev_notice(&link->dev, "invalid if_port requested\n");
+	} else
+		dev->if_port = 0;
+
+	if ((link->conf.ConfigBase == 0x03c0) &&
+	    (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
+		dev_info(&link->dev,
+			"this is an AX88190 card - use axnet_cs instead.\n");
+		return NULL;
+	}
+
+	local_hw_info = get_hwinfo(link);
+	if (!local_hw_info)
+		local_hw_info = get_prom(link);
+	if (!local_hw_info)
+		local_hw_info = get_dl10019(link);
+	if (!local_hw_info)
+		local_hw_info = get_ax88190(link);
+	if (!local_hw_info)
+		local_hw_info = get_hwired(link);
+
+	return local_hw_info;
 }
 
 static int pcnet_config(struct pcmcia_device *link)
 {
     struct net_device *dev = link->priv;
     pcnet_dev_t *info = PRIV(dev);
-    int ret, start_pg, stop_pg, cm_offset;
+    int start_pg, stop_pg, cm_offset;
     int has_shmem = 0;
     hw_info_t *local_hw_info;
 
     dev_dbg(&link->dev, "pcnet_config\n");
 
-    ret = pcmcia_loop_config(link, pcnet_confcheck, &has_shmem);
-    if (ret)
-	goto failed;
-
-    if (!link->irq)
-	    goto failed;
-
-    if (resource_size(link->resource[1]) == 8) {
-	link->conf.Attributes |= CONF_ENABLE_SPKR;
-	link->conf.Status = CCSR_AUDIO_ENA;
-    }
-    if ((link->manf_id == MANFID_IBM) &&
-	(link->card_id == PRODID_IBM_HOME_AND_AWAY))
-	link->conf.ConfigIndex |= 0x10;
-
-    ret = pcmcia_request_configuration(link, &link->conf);
-    if (ret)
-	    goto failed;
-    dev->irq = link->irq;
-    dev->base_addr = link->resource[0]->start;
-    if (info->flags & HAS_MISC_REG) {
-	if ((if_port == 1) || (if_port == 2))
-	    dev->if_port = if_port;
-	else
-	    printk(KERN_NOTICE "pcnet_cs: invalid if_port requested\n");
-    } else {
-	dev->if_port = 0;
-    }
-
-    if ((link->conf.ConfigBase == 0x03c0) &&
-	(link->manf_id == 0x149) && (link->card_id == 0xc1ab)) {
-	printk(KERN_INFO "pcnet_cs: this is an AX88190 card!\n");
-	printk(KERN_INFO "pcnet_cs: use axnet_cs instead.\n");
-	goto failed;
-    }
-
-    local_hw_info = get_hwinfo(link);
-    if (local_hw_info == NULL)
-	local_hw_info = get_prom(link);
-    if (local_hw_info == NULL)
-	local_hw_info = get_dl10019(link);
-    if (local_hw_info == NULL)
-	local_hw_info = get_ax88190(link);
-    if (local_hw_info == NULL)
-	local_hw_info = get_hwired(link);
-
-    if (local_hw_info == NULL) {
-	printk(KERN_NOTICE "pcnet_cs: unable to read hardware net"
-	       " address for io base %#3lx\n", dev->base_addr);
-	goto failed;
+    local_hw_info = pcnet_try_config(link, &has_shmem, 0);
+    if (!local_hw_info) {
+	    /* check whether forcing io_lines to 16 helps... */
+	    pcmcia_disable_device(link);
+	    local_hw_info = pcnet_try_config(link, &has_shmem, 1);
+	    if (local_hw_info == NULL) {
+		    dev_notice(&link->dev, "unable to read hardware net"
+			    " address for io base %#3lx\n", dev->base_addr);
+		    goto failed;
+	    }
     }
 
     info->flags = local_hw_info->flags;

From 359f64f7b3997e94ee71039b5fcdc1278b9b77c4 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony@atomide.com>
Date: Wed, 15 Sep 2010 10:18:51 -0700
Subject: [PATCH 368/728] omap: Fix compile dependency to LEDS_CLASS

If we LEDS_CLASS is not selected, we will get undefined reference
to `led_classdev_register'.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index e39a417a368d..a92cb499313f 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -33,7 +33,7 @@ config OMAP_DEBUG_DEVICES
 config OMAP_DEBUG_LEDS
 	bool
 	depends on OMAP_DEBUG_DEVICES
-	default y if LEDS
+	default y if LEDS_CLASS
 
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"

From ae44855ae8b36e4194a0a43eec6351e81f880955 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 21 Aug 2010 18:27:50 +0900
Subject: [PATCH 369/728] watchdog: sb_wdog: release irq and reboot notifier in
 error path and module_exit()

irq and reboot notifier are acquired in module_init() but never released.
They should be released correctly, otherwise reloading the module or error
during module_init() will cause a problem.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andrew Sharp <andy.sharp@lsi.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/sb_wdog.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/sb_wdog.c b/drivers/watchdog/sb_wdog.c
index 88c83aa57303..f31493e65b38 100644
--- a/drivers/watchdog/sb_wdog.c
+++ b/drivers/watchdog/sb_wdog.c
@@ -305,7 +305,7 @@ static int __init sbwdog_init(void)
 	if (ret) {
 		printk(KERN_ERR "%s: failed to request irq 1 - %d\n",
 						ident.identity, ret);
-		return ret;
+		goto out;
 	}
 
 	ret = misc_register(&sbwdog_miscdev);
@@ -313,14 +313,20 @@ static int __init sbwdog_init(void)
 		printk(KERN_INFO "%s: timeout is %ld.%ld secs\n",
 				ident.identity,
 				timeout / 1000000, (timeout / 100000) % 10);
-	} else
-		free_irq(1, (void *)user_dog);
+		return 0;
+	}
+	free_irq(1, (void *)user_dog);
+out:
+	unregister_reboot_notifier(&sbwdog_notifier);
+
 	return ret;
 }
 
 static void __exit sbwdog_exit(void)
 {
 	misc_deregister(&sbwdog_miscdev);
+	free_irq(1, (void *)user_dog);
+	unregister_reboot_notifier(&sbwdog_notifier);
 }
 
 module_init(sbwdog_init);

From 0e901bed4e053098f1c8411dcbf21324b7f61775 Mon Sep 17 00:00:00 2001
From: Mika Westerberg <mika.westerberg@iki.fi>
Date: Sun, 29 Aug 2010 13:53:14 +0300
Subject: [PATCH 370/728] watchdog: ts72xx_wdt: disable watchdog at probe

Since it may be already enabled by bootloader or some other utility. This patch
makes sure that the watchdog is disabled before any userspace daemon opens the
device. It is also required by the watchdog API.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/ts72xx_wdt.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c
index 458c499c1223..18cdeb4c4258 100644
--- a/drivers/watchdog/ts72xx_wdt.c
+++ b/drivers/watchdog/ts72xx_wdt.c
@@ -449,6 +449,9 @@ static __devinit int ts72xx_wdt_probe(struct platform_device *pdev)
 	wdt->pdev = pdev;
 	mutex_init(&wdt->lock);
 
+	/* make sure that the watchdog is disabled */
+	ts72xx_wdt_stop(wdt);
+
 	error = misc_register(&ts72xx_wdt_miscdev);
 	if (error) {
 		dev_err(&pdev->dev, "failed to register miscdev\n");

From 0a18e15598274b79ce14342ce0bfb76a87dadb45 Mon Sep 17 00:00:00 2001
From: Kevin Wells <wellsk40@gmail.com>
Date: Tue, 17 Aug 2010 17:45:28 -0700
Subject: [PATCH 371/728] watchdog: Enable NXP LPC32XX support in Kconfig
 (resend)

The NXP LPC32XX processor use the same watchdog as the Philips
PNX4008 processor.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b036677df8c4..24efd8ea41bb 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -213,11 +213,11 @@ config OMAP_WATCHDOG
 	  here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
 
 config PNX4008_WATCHDOG
-	tristate "PNX4008 Watchdog"
-	depends on ARCH_PNX4008
+	tristate "PNX4008 and LPC32XX Watchdog"
+	depends on ARCH_PNX4008 || ARCH_LPC32XX
 	help
 	  Say Y here if to include support for the watchdog timer
-	  in the PNX4008 processor.
+	  in the PNX4008 or LPC32XX processor.
 	  This driver can be built as a module by choosing M. The module
 	  will be called pnx4008_wdt.
 

From 2d2b6901649a62977452be85df53eda2412def24 Mon Sep 17 00:00:00 2001
From: Petr Tesarik <ptesarik@suse.cz>
Date: Wed, 15 Sep 2010 15:35:48 -0700
Subject: [PATCH 372/728] [IA64] Optimize ticket spinlocks in
 fsys_rt_sigprocmask

Tony's fix (f574c843191728d9407b766a027f779dcd27b272) has a small bug,
it incorrectly uses "r3" as a scratch register in the first of the two
unlock paths ... it is also inefficient.  Optimize the fast path again.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/fsys.S | 46 ++++++++++++-----------------------------
 1 file changed, 13 insertions(+), 33 deletions(-)

diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 471a1e783aca..331d42bda77a 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -420,34 +420,31 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 	;;
 
 	RSM_PSR_I(p0, r18, r19)			// mask interrupt delivery
-	mov ar.ccv=0
 	andcm r14=r14,r17			// filter out SIGKILL & SIGSTOP
+	mov r8=EINVAL			// default to EINVAL
 
 #ifdef CONFIG_SMP
 	// __ticket_spin_trylock(r31)
 	ld4 r17=[r31]
-	mov r8=EINVAL			// default to EINVAL
 	;;
-	extr r9=r17,17,15
-	;;
-	xor r18=r17,r9
-	adds r19=1,r17
-	;;
-	extr.u r18=r18,0,15
-	;;
-	cmp.eq p0,p7=0,r18
-(p7)	br.cond.spnt.many .lock_contention
 	mov.m ar.ccv=r17
+	extr.u r9=r17,17,15
+	adds r19=1,r17
+	extr.u r18=r17,0,15
 	;;
-	cmpxchg4.acq r9=[r31],r19,ar.ccv
+	cmp.eq p6,p7=r9,r18
+	;;
+(p6)	cmpxchg4.acq r9=[r31],r19,ar.ccv
+(p6)	dep.z r20=r19,1,15		// next serving ticket for unlock
+(p7)	br.cond.spnt.many .lock_contention
 	;;
 	cmp4.eq p0,p7=r9,r17
+	adds r31=2,r31
 (p7)	br.cond.spnt.many .lock_contention
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
 	;;
 #else
 	ld8 r3=[r2]			// re-read current->blocked now that we hold the lock
-	mov r8=EINVAL			// default to EINVAL
 #endif
 	add r18=IA64_TASK_PENDING_OFFSET+IA64_SIGPENDING_SIGNAL_OFFSET,r16
 	add r19=IA64_TASK_SIGNAL_OFFSET,r16
@@ -503,16 +500,8 @@ EX(.fail_efault, ld8 r14=[r33])			// r14 <- *set
 
 #ifdef CONFIG_SMP
 	// __ticket_spin_unlock(r31)
-	adds r31=2,r31
-	;;
-	ld2.bias r2=[r31]
-	mov r3=65534
-	;;
-	adds r2=2,r2
-	;;
-	and r3=r3,r2
-	;;
-	st2.rel [r31]=r3
+	st2.rel [r31]=r20
+	mov r20=0					// i must not leak kernel bits...
 #endif
 	SSM_PSR_I(p0, p9, r31)
 	;;
@@ -535,16 +524,7 @@ EX(.fail_efault, (p15) st8 [r34]=r3)
 .sig_pending:
 #ifdef CONFIG_SMP
 	// __ticket_spin_unlock(r31)
-	adds r31=2,r31
-	;;
-	ld2.bias r2=[r31]
-	mov r3=65534
-	;;
-	adds r2=2,r2
-	;;
-	and r3=r3,r2
-	;;
-	st2.rel [r31]=r3
+	st2.rel [r31]=r20			// release the lock
 #endif
 	SSM_PSR_I(p0, p9, r17)
 	;;

From b4aaa78f4c2f9cde2f335b14f4ca30b01f9651ca Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed, 15 Sep 2010 19:08:24 -0400
Subject: [PATCH 373/728] drivers/video/via/ioctl.c: prevent reading
 uninitialized stack memory

The VIAFB_GET_INFO device ioctl allows unprivileged users to read 246
bytes of uninitialized stack memory, because the "reserved" member of
the viafb_ioctl_info struct declared on the stack is not altered or
zeroed before being copied back to the user.  This patch takes care of
it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
---
 drivers/video/via/ioctl.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/video/via/ioctl.c b/drivers/video/via/ioctl.c
index da03c074e32a..4d553d0b8d7a 100644
--- a/drivers/video/via/ioctl.c
+++ b/drivers/video/via/ioctl.c
@@ -25,6 +25,8 @@ int viafb_ioctl_get_viafb_info(u_long arg)
 {
 	struct viafb_ioctl_info viainfo;
 
+	memset(&viainfo, 0, sizeof(struct viafb_ioctl_info));
+
 	viainfo.viafb_id = VIAID;
 	viainfo.vendor_id = PCI_VIA_VENDOR_ID;
 

From 145a902bfeb1f89a41165bd2d1e633ce070bcb73 Mon Sep 17 00:00:00 2001
From: David Henningsson <david.henningsson@canonical.com>
Date: Thu, 16 Sep 2010 10:07:53 +0200
Subject: [PATCH 374/728] ALSA: HDA: Enable internal speaker on Dell M101z

BugLink: http://launchpad.net/bugs/640254

In some cases a magic processing coefficient is needed to enable
the internal speaker on Dell M101z. According to Realtek, this
processing coefficient is only present on ALC269vb.

Cc: stable@kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index bcbf9160ed81..a1312a6c8af2 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -14453,6 +14453,7 @@ static void alc269_auto_init(struct hda_codec *codec)
 
 enum {
 	ALC269_FIXUP_SONY_VAIO,
+	ALC269_FIXUP_DELL_M101Z,
 };
 
 static const struct hda_verb alc269_sony_vaio_fixup_verbs[] = {
@@ -14464,11 +14465,20 @@ static const struct alc_fixup alc269_fixups[] = {
 	[ALC269_FIXUP_SONY_VAIO] = {
 		.verbs = alc269_sony_vaio_fixup_verbs
 	},
+	[ALC269_FIXUP_DELL_M101Z] = {
+		.verbs = (const struct hda_verb[]) {
+			/* Enables internal speaker */
+			{0x20, AC_VERB_SET_COEF_INDEX, 13},
+			{0x20, AC_VERB_SET_PROC_COEF, 0x4040},
+			{}
+		}
+	},
 };
 
 static struct snd_pci_quirk alc269_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x104d, 0x9071, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
 	SND_PCI_QUIRK(0x104d, 0x9077, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
+	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
 	{}
 };
 

From c33f543d320843e1732534c3931da4bbd18e6c14 Mon Sep 17 00:00:00 2001
From: Patrick Simmons <linuxrocks123@netscape.net>
Date: Wed, 8 Sep 2010 10:34:28 -0400
Subject: [PATCH 375/728] oprofile: Add Support for Intel CPU Family 6 / Model
 22 (Intel Celeron 540)

This patch adds CPU type detection for the Intel Celeron 540, which is
part of the Core 2 family according to Wikipedia; the family and ID pair
is absent from the Volume 3B table referenced in the source code
comments.  I have tested this patch on an Intel Celeron 540 machine
reporting itself as Family 6 Model 22, and OProfile runs on the machine
without issue.

Spec:

 http://download.intel.com/design/mobile/SPECUPDT/317667.pdf

Signed-off-by: Patrick Simmons <linuxrocks123@netscape.net>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index cfe4faabb0f6..009b819f48d0 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -671,7 +671,9 @@ static int __init ppro_init(char **cpu_type)
 	case 14:
 		*cpu_type = "i386/core";
 		break;
-	case 15: case 23:
+	case 0x0f:
+	case 0x16:
+	case 0x17:
 		*cpu_type = "i386/core_2";
 		break;
 	case 0x1a:

From 37880c909c6a22674d3c0f83f2737264b4e60fe1 Mon Sep 17 00:00:00 2001
From: christophe leroy <christophe.leroy@c-s.fr>
Date: Thu, 16 Sep 2010 09:05:25 +0200
Subject: [PATCH 376/728] spi/mpc8xxx: fix buffer overrun on large transfers

It fixes an issue when sending-only or receiving-only more than
PAGE_SIZE bytes.

Signed-off-by: christophe leroy <christophe.leroy@c-s.fr>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_mpc8xxx.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_mpc8xxx.c
index d31b57f7baaf..1dd86b835cd8 100644
--- a/drivers/spi/spi_mpc8xxx.c
+++ b/drivers/spi/spi_mpc8xxx.c
@@ -408,11 +408,17 @@ static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi)
 
 	xfer_ofs = mspi->xfer_in_progress->len - mspi->count;
 
-	out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
+	if (mspi->rx_dma == mspi->dma_dummy_rx)
+		out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma);
+	else
+		out_be32(&rx_bd->cbd_bufaddr, mspi->rx_dma + xfer_ofs);
 	out_be16(&rx_bd->cbd_datlen, 0);
 	out_be16(&rx_bd->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT | BD_SC_WRAP);
 
-	out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
+	if (mspi->tx_dma == mspi->dma_dummy_tx)
+		out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma);
+	else
+		out_be32(&tx_bd->cbd_bufaddr, mspi->tx_dma + xfer_ofs);
 	out_be16(&tx_bd->cbd_datlen, xfer_len);
 	out_be16(&tx_bd->cbd_sc, BD_SC_READY | BD_SC_INTRPT | BD_SC_WRAP |
 				 BD_SC_LAST);

From 8699a0b657b43fa6401537dfe345bee7aa8115ec Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 16 Sep 2010 22:52:32 +0200
Subject: [PATCH 377/728] ALSA: pcm - Fix unbalanced pm_qos_request

The pm_qos_request isn't freed properly when OSS PCM emulation is used
because it skips snd_pcm_hw_free() call but directly releases the
stream.  This resulted in Oops later.

Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/pcm_native.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 134fc6c2e08d..d4eb2ef80784 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -1992,6 +1992,8 @@ void snd_pcm_release_substream(struct snd_pcm_substream *substream)
 		substream->ops->close(substream);
 		substream->hw_opened = 0;
 	}
+	if (pm_qos_request_active(&substream->latency_pm_qos_req))
+		pm_qos_remove_request(&substream->latency_pm_qos_req);
 	if (substream->pcm_release) {
 		substream->pcm_release(substream);
 		substream->pcm_release = NULL;

From 901d46d5a8eb821b03ca9e8cf005beb0c92f31ea Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 16 Sep 2010 23:06:50 +0200
Subject: [PATCH 378/728] ALSA: pcm - Fix race with proc files

The PCM proc files may open a race against substream close, which can
end up with an Oops.  Use the open_mutex to protect for it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/pcm.c | 33 ++++++++++++++++++++++++---------
 1 file changed, 24 insertions(+), 9 deletions(-)

diff --git a/sound/core/pcm.c b/sound/core/pcm.c
index 204af48c5cc1..ac242a377aea 100644
--- a/sound/core/pcm.c
+++ b/sound/core/pcm.c
@@ -372,14 +372,17 @@ static void snd_pcm_substream_proc_hw_params_read(struct snd_info_entry *entry,
 						  struct snd_info_buffer *buffer)
 {
 	struct snd_pcm_substream *substream = entry->private_data;
-	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_pcm_runtime *runtime;
+
+	mutex_lock(&substream->pcm->open_mutex);
+	runtime = substream->runtime;
 	if (!runtime) {
 		snd_iprintf(buffer, "closed\n");
-		return;
+		goto unlock;
 	}
 	if (runtime->status->state == SNDRV_PCM_STATE_OPEN) {
 		snd_iprintf(buffer, "no setup\n");
-		return;
+		goto unlock;
 	}
 	snd_iprintf(buffer, "access: %s\n", snd_pcm_access_name(runtime->access));
 	snd_iprintf(buffer, "format: %s\n", snd_pcm_format_name(runtime->format));
@@ -398,20 +401,25 @@ static void snd_pcm_substream_proc_hw_params_read(struct snd_info_entry *entry,
 		snd_iprintf(buffer, "OSS period frames: %lu\n", (unsigned long)runtime->oss.period_frames);
 	}
 #endif
+ unlock:
+	mutex_unlock(&substream->pcm->open_mutex);
 }
 
 static void snd_pcm_substream_proc_sw_params_read(struct snd_info_entry *entry,
 						  struct snd_info_buffer *buffer)
 {
 	struct snd_pcm_substream *substream = entry->private_data;
-	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_pcm_runtime *runtime;
+
+	mutex_lock(&substream->pcm->open_mutex);
+	runtime = substream->runtime;
 	if (!runtime) {
 		snd_iprintf(buffer, "closed\n");
-		return;
+		goto unlock;
 	}
 	if (runtime->status->state == SNDRV_PCM_STATE_OPEN) {
 		snd_iprintf(buffer, "no setup\n");
-		return;
+		goto unlock;
 	}
 	snd_iprintf(buffer, "tstamp_mode: %s\n", snd_pcm_tstamp_mode_name(runtime->tstamp_mode));
 	snd_iprintf(buffer, "period_step: %u\n", runtime->period_step);
@@ -421,24 +429,29 @@ static void snd_pcm_substream_proc_sw_params_read(struct snd_info_entry *entry,
 	snd_iprintf(buffer, "silence_threshold: %lu\n", runtime->silence_threshold);
 	snd_iprintf(buffer, "silence_size: %lu\n", runtime->silence_size);
 	snd_iprintf(buffer, "boundary: %lu\n", runtime->boundary);
+ unlock:
+	mutex_unlock(&substream->pcm->open_mutex);
 }
 
 static void snd_pcm_substream_proc_status_read(struct snd_info_entry *entry,
 					       struct snd_info_buffer *buffer)
 {
 	struct snd_pcm_substream *substream = entry->private_data;
-	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct snd_pcm_runtime *runtime;
 	struct snd_pcm_status status;
 	int err;
+
+	mutex_lock(&substream->pcm->open_mutex);
+	runtime = substream->runtime;
 	if (!runtime) {
 		snd_iprintf(buffer, "closed\n");
-		return;
+		goto unlock;
 	}
 	memset(&status, 0, sizeof(status));
 	err = snd_pcm_status(substream, &status);
 	if (err < 0) {
 		snd_iprintf(buffer, "error %d\n", err);
-		return;
+		goto unlock;
 	}
 	snd_iprintf(buffer, "state: %s\n", snd_pcm_state_name(status.state));
 	snd_iprintf(buffer, "owner_pid   : %d\n", pid_vnr(substream->pid));
@@ -452,6 +465,8 @@ static void snd_pcm_substream_proc_status_read(struct snd_info_entry *entry,
 	snd_iprintf(buffer, "-----\n");
 	snd_iprintf(buffer, "hw_ptr      : %ld\n", runtime->status->hw_ptr);
 	snd_iprintf(buffer, "appl_ptr    : %ld\n", runtime->control->appl_ptr);
+ unlock:
+	mutex_unlock(&substream->pcm->open_mutex);
 }
 
 #ifdef CONFIG_SND_PCM_XRUN_DEBUG

From 8702d33aa6e6d753ef99163afe48aba1323374ef Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Wed, 15 Sep 2010 13:02:44 +0200
Subject: [PATCH 379/728] firewire: nosy: fix build when CONFIG_FIREWIRE=N

drivers/firewire/nosy* is a stand-alone driver that does not depend on
CONFIG_FIREWIRE.  Hence let make descend into drivers/firewire/ also
if that option is off.

The stand-alone driver drivers/ieee1394/init_ohci1394_dma*  will soon be
moved into drivers/firewire/ too and will require the same makefile fix.

Side effect:
As mentioned in https://bugzilla.novell.com/show_bug.cgi?id=586172#c24
this influences the order in which either firewire-ohci or ohci1394 is
going to be bound to an OHCI-1394 controller in case of a modular build
of both drivers if no modprobe blacklist entries are configured.
However, a user of such a setup cannot expect deterministic behavior
anyway.  The Kconfig help and the migration guide at
ieee1394.wiki.kernel.org recommend blacklist entries when a dual
IEEE 1394 stack build is being used.  (The coexistence period of the two
stacks is planned to end soon.)

Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index 91874e048552..0bbb4561720e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -50,7 +50,7 @@ obj-$(CONFIG_SPI)		+= spi/
 obj-y				+= net/
 obj-$(CONFIG_ATM)		+= atm/
 obj-$(CONFIG_FUSION)		+= message/
-obj-$(CONFIG_FIREWIRE)		+= firewire/
+obj-y				+= firewire/
 obj-y				+= ieee1394/
 obj-$(CONFIG_UIO)		+= uio/
 obj-y				+= cdrom/

From ae00d4f37f4df56821331deb1028748110dd6dc9 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Thu, 16 Sep 2010 16:26:51 -0700
Subject: [PATCH 380/728] ceph: fix cap_snap and realm split

The cap_snap creation/queueing relies on both the current i_head_snapc
_and_ the i_snap_realm pointers being correct, so that the new cap_snap
can properly reference the old context and the new i_head_snapc can be
updated to reference the new snaprealm's context.  To fix this, we:

 - move inodes completely to the new (split) realm so that i_snap_realm
   is correct, and
 - generate the new snapc's _before_ queueing the cap_snaps in
   ceph_update_snap_trace().

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/addr.c  |  4 +--
 fs/ceph/snap.c  | 88 ++++++++++++++++---------------------------------
 fs/ceph/super.h |  2 ++
 3 files changed, 33 insertions(+), 61 deletions(-)

diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 50461b8c23a4..efbc604001c8 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -411,8 +411,8 @@ static int writepage_nounlock(struct page *page, struct writeback_control *wbc)
 	if (i_size < page_off + len)
 		len = i_size - page_off;
 
-	dout("writepage %p page %p index %lu on %llu~%u\n",
-	     inode, page, page->index, page_off, len);
+	dout("writepage %p page %p index %lu on %llu~%u snapc %p\n",
+	     inode, page, page->index, page_off, len, snapc);
 
 	writeback_stat = atomic_long_inc_return(&client->writeback_count);
 	if (writeback_stat >
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 9e836afba341..9e6eef14b7df 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -119,6 +119,7 @@ static struct ceph_snap_realm *ceph_create_snap_realm(
 	INIT_LIST_HEAD(&realm->children);
 	INIT_LIST_HEAD(&realm->child_item);
 	INIT_LIST_HEAD(&realm->empty_item);
+	INIT_LIST_HEAD(&realm->dirty_item);
 	INIT_LIST_HEAD(&realm->inodes_with_caps);
 	spin_lock_init(&realm->inodes_with_caps_lock);
 	__insert_snap_realm(&mdsc->snap_realms, realm);
@@ -604,6 +605,7 @@ int ceph_update_snap_trace(struct ceph_mds_client *mdsc,
 	struct ceph_snap_realm *realm;
 	int invalidate = 0;
 	int err = -ENOMEM;
+	LIST_HEAD(dirty_realms);
 
 	dout("update_snap_trace deletion=%d\n", deletion);
 more:
@@ -626,24 +628,6 @@ more:
 		}
 	}
 
-	if (le64_to_cpu(ri->seq) > realm->seq) {
-		dout("update_snap_trace updating %llx %p %lld -> %lld\n",
-		     realm->ino, realm, realm->seq, le64_to_cpu(ri->seq));
-		/*
-		 * if the realm seq has changed, queue a cap_snap for every
-		 * inode with open caps.  we do this _before_ we update
-		 * the realm info so that we prepare for writeback under the
-		 * _previous_ snap context.
-		 *
-		 * ...unless it's a snap deletion!
-		 */
-		if (!deletion)
-			queue_realm_cap_snaps(realm);
-	} else {
-		dout("update_snap_trace %llx %p seq %lld unchanged\n",
-		     realm->ino, realm, realm->seq);
-	}
-
 	/* ensure the parent is correct */
 	err = adjust_snap_realm_parent(mdsc, realm, le64_to_cpu(ri->parent));
 	if (err < 0)
@@ -651,6 +635,8 @@ more:
 	invalidate += err;
 
 	if (le64_to_cpu(ri->seq) > realm->seq) {
+		dout("update_snap_trace updating %llx %p %lld -> %lld\n",
+		     realm->ino, realm, realm->seq, le64_to_cpu(ri->seq));
 		/* update realm parameters, snap lists */
 		realm->seq = le64_to_cpu(ri->seq);
 		realm->created = le64_to_cpu(ri->created);
@@ -668,9 +654,17 @@ more:
 		if (err < 0)
 			goto fail;
 
+		/* queue realm for cap_snap creation */
+		list_add(&realm->dirty_item, &dirty_realms);
+
 		invalidate = 1;
 	} else if (!realm->cached_context) {
+		dout("update_snap_trace %llx %p seq %lld new\n",
+		     realm->ino, realm, realm->seq);
 		invalidate = 1;
+	} else {
+		dout("update_snap_trace %llx %p seq %lld unchanged\n",
+		     realm->ino, realm, realm->seq);
 	}
 
 	dout("done with %llx %p, invalidated=%d, %p %p\n", realm->ino,
@@ -683,6 +677,14 @@ more:
 	if (invalidate)
 		rebuild_snap_realms(realm);
 
+	/*
+	 * queue cap snaps _after_ we've built the new snap contexts,
+	 * so that i_head_snapc can be set appropriately.
+	 */
+	list_for_each_entry(realm, &dirty_realms, dirty_item) {
+		queue_realm_cap_snaps(realm);
+	}
+
 	__cleanup_empty_realms(mdsc);
 	return 0;
 
@@ -816,6 +818,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc,
 			};
 			struct inode *inode = ceph_find_inode(sb, vino);
 			struct ceph_inode_info *ci;
+			struct ceph_snap_realm *oldrealm;
 
 			if (!inode)
 				continue;
@@ -841,18 +844,19 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc,
 			dout(" will move %p to split realm %llx %p\n",
 			     inode, realm->ino, realm);
 			/*
-			 * Remove the inode from the realm's inode
-			 * list, but don't add it to the new realm
-			 * yet.  We don't want the cap_snap to be
-			 * queued (again) by ceph_update_snap_trace()
-			 * below.  Queue it _now_, under the old context.
+			 * Move the inode to the new realm
 			 */
 			spin_lock(&realm->inodes_with_caps_lock);
 			list_del_init(&ci->i_snap_realm_item);
+			list_add(&ci->i_snap_realm_item,
+				 &realm->inodes_with_caps);
+			oldrealm = ci->i_snap_realm;
+			ci->i_snap_realm = realm;
 			spin_unlock(&realm->inodes_with_caps_lock);
 			spin_unlock(&inode->i_lock);
 
-			ceph_queue_cap_snap(ci);
+			ceph_get_snap_realm(mdsc, realm);
+			ceph_put_snap_realm(mdsc, oldrealm);
 
 			iput(inode);
 			continue;
@@ -880,43 +884,9 @@ skip_inode:
 	ceph_update_snap_trace(mdsc, p, e,
 			       op == CEPH_SNAP_OP_DESTROY);
 
-	if (op == CEPH_SNAP_OP_SPLIT) {
-		/*
-		 * ok, _now_ add the inodes into the new realm.
-		 */
-		for (i = 0; i < num_split_inos; i++) {
-			struct ceph_vino vino = {
-				.ino = le64_to_cpu(split_inos[i]),
-				.snap = CEPH_NOSNAP,
-			};
-			struct inode *inode = ceph_find_inode(sb, vino);
-			struct ceph_inode_info *ci;
-
-			if (!inode)
-				continue;
-			ci = ceph_inode(inode);
-			spin_lock(&inode->i_lock);
-			if (list_empty(&ci->i_snap_realm_item)) {
-				struct ceph_snap_realm *oldrealm =
-					ci->i_snap_realm;
-
-				dout(" moving %p to split realm %llx %p\n",
-				     inode, realm->ino, realm);
-				spin_lock(&realm->inodes_with_caps_lock);
-				list_add(&ci->i_snap_realm_item,
-					 &realm->inodes_with_caps);
-				ci->i_snap_realm = realm;
-				spin_unlock(&realm->inodes_with_caps_lock);
-				ceph_get_snap_realm(mdsc, realm);
-				ceph_put_snap_realm(mdsc, oldrealm);
-			}
-			spin_unlock(&inode->i_lock);
-			iput(inode);
-		}
-
+	if (op == CEPH_SNAP_OP_SPLIT)
 		/* we took a reference when we created the realm, above */
 		ceph_put_snap_realm(mdsc, realm);
-	}
 
 	__cleanup_empty_realms(mdsc);
 
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index c33897ae5725..c80bfbe27b05 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -690,6 +690,8 @@ struct ceph_snap_realm {
 
 	struct list_head empty_item;     /* if i have ref==0 */
 
+	struct list_head dirty_item;     /* if realm needs new context */
+
 	/* the current set of snaps for this realm */
 	struct ceph_snap_context *cached_context;
 

From 89e45aac42d40426c97e6901811309bf49c4993f Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Fri, 17 Sep 2010 03:24:13 +0200
Subject: [PATCH 381/728] x86: Fix instruction breakpoint encoding

Lengths and types of breakpoints are encoded in a half byte
into CPU registers. However when we extract these values
and store them, we add a high half byte part to them: 0x40 to the
length and 0x80 to the type.
When that gets reloaded to the CPU registers, the high part
is masked.

While making the instruction breakpoints available for perf,
I zapped that high part on instruction breakpoint encoding
and that broke the arch -> generic translation used by ptrace
instruction breakpoints. Writing dr7 to set an inst breakpoint
was then failing.

There is no apparent reason for these high parts so we could get
rid of them altogether. That's an invasive change though so let's
do that later and for now fix the problem by restoring that inst
breakpoint high part encoding in this sole patch.

Reported-by: Kelvie Wong <kelvie@ieee.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
---
 arch/x86/include/asm/hw_breakpoint.h |  2 +-
 arch/x86/kernel/hw_breakpoint.c      | 40 +++++++++++++---------------
 2 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/arch/x86/include/asm/hw_breakpoint.h b/arch/x86/include/asm/hw_breakpoint.h
index 528a11e8d3e3..824ca07860d0 100644
--- a/arch/x86/include/asm/hw_breakpoint.h
+++ b/arch/x86/include/asm/hw_breakpoint.h
@@ -20,7 +20,7 @@ struct arch_hw_breakpoint {
 #include <linux/list.h>
 
 /* Available HW breakpoint length encodings */
-#define X86_BREAKPOINT_LEN_X		0x00
+#define X86_BREAKPOINT_LEN_X		0x40
 #define X86_BREAKPOINT_LEN_1		0x40
 #define X86_BREAKPOINT_LEN_2		0x44
 #define X86_BREAKPOINT_LEN_4		0x4c
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index a474ec37c32f..ff15c9dcc25d 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -206,11 +206,27 @@ int arch_check_bp_in_kernelspace(struct perf_event *bp)
 int arch_bp_generic_fields(int x86_len, int x86_type,
 			   int *gen_len, int *gen_type)
 {
+	/* Type */
+	switch (x86_type) {
+	case X86_BREAKPOINT_EXECUTE:
+		if (x86_len != X86_BREAKPOINT_LEN_X)
+			return -EINVAL;
+
+		*gen_type = HW_BREAKPOINT_X;
+		*gen_len = sizeof(long);
+		return 0;
+	case X86_BREAKPOINT_WRITE:
+		*gen_type = HW_BREAKPOINT_W;
+		break;
+	case X86_BREAKPOINT_RW:
+		*gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
+		break;
+	default:
+		return -EINVAL;
+	}
+
 	/* Len */
 	switch (x86_len) {
-	case X86_BREAKPOINT_LEN_X:
-		*gen_len = sizeof(long);
-		break;
 	case X86_BREAKPOINT_LEN_1:
 		*gen_len = HW_BREAKPOINT_LEN_1;
 		break;
@@ -229,21 +245,6 @@ int arch_bp_generic_fields(int x86_len, int x86_type,
 		return -EINVAL;
 	}
 
-	/* Type */
-	switch (x86_type) {
-	case X86_BREAKPOINT_EXECUTE:
-		*gen_type = HW_BREAKPOINT_X;
-		break;
-	case X86_BREAKPOINT_WRITE:
-		*gen_type = HW_BREAKPOINT_W;
-		break;
-	case X86_BREAKPOINT_RW:
-		*gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
@@ -316,9 +317,6 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	ret = -EINVAL;
 
 	switch (info->len) {
-	case X86_BREAKPOINT_LEN_X:
-		align = sizeof(long) -1;
-		break;
 	case X86_BREAKPOINT_LEN_1:
 		align = 0;
 		break;

From 068e35eee9ef98eb4cab55181977e24995d273be Mon Sep 17 00:00:00 2001
From: Matt Helsley <matthltc@us.ibm.com>
Date: Mon, 13 Sep 2010 13:01:18 -0700
Subject: [PATCH 382/728] hw breakpoints: Fix pid namespace bug

Hardware breakpoints can't be registered within pid namespaces
because tsk->pid is passed rather than the pid in the current
namespace.

(See https://bugzilla.kernel.org/show_bug.cgi?id=17281 )

This is a quick fix demonstrating the problem but is not the
best method of solving the problem since passing pids internally
is not the best way to avoid pid namespace bugs. Subsequent patches
will show a better solution.

Much thanks to Frederic Weisbecker <fweisbec@gmail.com> for doing
the bulk of the work finding this bug.

Reported-by: Robin Green <greenrd@greenrd.org>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: 2.6.33-2.6.35 <stable@kernel.org>
LKML-Reference: <f63454af09fb1915717251570423eb9ddd338340.1284407762.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
---
 kernel/hw_breakpoint.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index d71a987fd2bf..c7c2aed9e2dc 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -433,7 +433,8 @@ register_user_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered,
 			    struct task_struct *tsk)
 {
-	return perf_event_create_kernel_counter(attr, -1, tsk->pid, triggered);
+	return perf_event_create_kernel_counter(attr, -1, task_pid_vnr(tsk),
+						triggered);
 }
 EXPORT_SYMBOL_GPL(register_user_hw_breakpoint);
 

From 126925c090155f13e90b9e7e8c4010e96027c00a Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Tue, 7 Sep 2010 17:02:47 +1000
Subject: [PATCH 383/728] md: call md_update_sb even for 'external' metadata
 arrays.

Now that we depend on md_update_sb to clear variable bits in
mddev->flags (rather than trying not to set them) it is important to
always call md_update_sb when appropriate.

md_check_recovery has this job but explicitly avoids it for ->external
metadata arrays.  This is not longer appropraite, or needed.

However we do want to avoid taking the mddev lock if only
MD_CHANGE_PENDING is set as that is not cleared by md_update_sb for
external-metadata arrays.

Reported-by:  "Kwolek, Adam" <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 43cf9cc9c1df..bdd9bba577b0 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7069,7 +7069,7 @@ void md_check_recovery(mddev_t *mddev)
 	if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
 		return;
 	if ( ! (
-		(mddev->flags && !mddev->external) ||
+		(mddev->flags & ~ (1<<MD_CHANGE_PENDING)) ||
 		test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) ||
 		test_bit(MD_RECOVERY_DONE, &mddev->recovery) ||
 		(mddev->external == 0 && mddev->safemode == 1) ||

From ddcf3522cf03a147c867a2e0155761652dbd156a Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Wed, 8 Sep 2010 16:48:17 +1000
Subject: [PATCH 384/728] md: fix v1.x metadata update when a disk is missing.

If an array with 1.x metadata is assembled with the last disk missing,
md doesn't properly record the fact that the disk was missing.

This is unlikely to cause a real problem as the event count will be
different to the count on the missing disk so it won't be included in
the array.  However it could still cause confusion.

So make sure we clear all the relevant slots, not just the early ones.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index bdd9bba577b0..f20d13e717d5 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -1643,7 +1643,9 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev)
 		bmask = queue_logical_block_size(rdev->bdev->bd_disk->queue)-1;
 		if (rdev->sb_size & bmask)
 			rdev->sb_size = (rdev->sb_size | bmask) + 1;
-	}
+	} else
+		max_dev = le32_to_cpu(sb->max_dev);
+
 	for (i=0; i<max_dev;i++)
 		sb->dev_roles[i] = cpu_to_le16(0xfffe);
 	

From 79077319d7c7844d5d836e52099a7a1bcadf9b04 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun, 12 Sep 2010 19:58:04 +0100
Subject: [PATCH 385/728] drm/i915/crt: Downgrade warnings for hotplug failures

These are not fatal errors, so do not alarm the user by filling the
logs with *** ERROR ***. Especially as we know that g4x CRT detection
is a little sticky.

On the one hand the errors are valid since they are warning us of a
stall -- we poll the register whilst holding the mode lock so not even
the mouse will update. On the other hand, those stalls were already present
yet nobody complained.

Reported-by: Andi Kleen <andi@firstfloor.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18332
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_crt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 4b7735196cd5..8f6f38c7d84d 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -188,7 +188,7 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 
 	if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
 		     1000, 1))
-		DRM_ERROR("timed out waiting for FORCE_TRIGGER");
+		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
 
 	if (turn_off_dac) {
 		I915_WRITE(PCH_ADPA, temp);
@@ -245,7 +245,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 		if (wait_for((I915_READ(PORT_HOTPLUG_EN) &
 			      CRT_HOTPLUG_FORCE_DETECT) == 0,
 			     1000, 1))
-			DRM_ERROR("timed out waiting for FORCE_DETECT to go off");
+			DRM_DEBUG_KMS("timed out waiting for FORCE_DETECT to go off");
 	}
 
 	stat = I915_READ(PORT_HOTPLUG_STAT);

From e259befd9013e212648c3bd4f6f1fbf92d0dd51d Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri, 17 Sep 2010 00:32:02 +0100
Subject: [PATCH 386/728] drm/i915: Fix Sandybridge fence registers

With 5 places to update when adding handling for fence registers, it is
easy to overlook one or two. Correct that oversight, but fence
management should be improved before a new set of registers is added.

Bugzilla: https://bugs.freedesktop.org/show_bug?id=30199
Original patch by: Yuanhan Liu <yuanhan.liu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_gem.c     | 37 +++++++++++++++++++----------
 drivers/gpu/drm/i915/i915_suspend.c | 36 +++++++++++++++++++++-------
 2 files changed, 51 insertions(+), 22 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 16fca1d1799a..cf4ffbee1c00 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2351,14 +2351,21 @@ i915_gem_object_get_fence_reg(struct drm_gem_object *obj)
 
 	reg->obj = obj;
 
-	if (IS_GEN6(dev))
+	switch (INTEL_INFO(dev)->gen) {
+	case 6:
 		sandybridge_write_fence_reg(reg);
-	else if (IS_I965G(dev))
+		break;
+	case 5:
+	case 4:
 		i965_write_fence_reg(reg);
-	else if (IS_I9XX(dev))
+		break;
+	case 3:
 		i915_write_fence_reg(reg);
-	else
+		break;
+	case 2:
 		i830_write_fence_reg(reg);
+		break;
+	}
 
 	trace_i915_gem_object_get_fence(obj, obj_priv->fence_reg,
 			obj_priv->tiling_mode);
@@ -2381,22 +2388,26 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
 	struct drm_i915_fence_reg *reg =
 		&dev_priv->fence_regs[obj_priv->fence_reg];
+	uint32_t fence_reg;
 
-	if (IS_GEN6(dev)) {
+	switch (INTEL_INFO(dev)->gen) {
+	case 6:
 		I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 +
 			     (obj_priv->fence_reg * 8), 0);
-	} else if (IS_I965G(dev)) {
+		break;
+	case 5:
+	case 4:
 		I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
-	} else {
-		uint32_t fence_reg;
-
-		if (obj_priv->fence_reg < 8)
-			fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+		break;
+	case 3:
+		if (obj_priv->fence_reg > 8)
+			fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg - 8) * 4;
 		else
-			fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
-						       8) * 4;
+	case 2:
+			fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
 
 		I915_WRITE(fence_reg, 0);
+		break;
 	}
 
 	reg->obj = NULL;
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 2c6b98f2440e..31f08581e93a 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -789,16 +789,25 @@ int i915_save_state(struct drm_device *dev)
 		dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
 
 	/* Fences */
-	if (IS_I965G(dev)) {
+	switch (INTEL_INFO(dev)->gen) {
+	case 6:
+		for (i = 0; i < 16; i++)
+			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_SANDYBRIDGE_0 + (i * 8));
+		break;
+	case 5:
+	case 4:
 		for (i = 0; i < 16; i++)
 			dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
-	} else {
-		for (i = 0; i < 8; i++)
-			dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
-
+		break;
+	case 3:
 		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
 			for (i = 0; i < 8; i++)
 				dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+	case 2:
+		for (i = 0; i < 8; i++)
+			dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+		break;
+
 	}
 
 	return 0;
@@ -815,15 +824,24 @@ int i915_restore_state(struct drm_device *dev)
 	I915_WRITE(HWS_PGA, dev_priv->saveHWS);
 
 	/* Fences */
-	if (IS_I965G(dev)) {
+	switch (INTEL_INFO(dev)->gen) {
+	case 6:
+		for (i = 0; i < 16; i++)
+			I915_WRITE64(FENCE_REG_SANDYBRIDGE_0 + (i * 8), dev_priv->saveFENCE[i]);
+		break;
+	case 5:
+	case 4:
 		for (i = 0; i < 16; i++)
 			I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
-	} else {
-		for (i = 0; i < 8; i++)
-			I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+		break;
+	case 3:
+	case 2:
 		if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
 			for (i = 0; i < 8; i++)
 				I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+		for (i = 0; i < 8; i++)
+			I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+		break;
 	}
 
 	i915_restore_display(dev);

From 41a51428916ab04587bacee2dda61c4a0c4fc02f Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri, 17 Sep 2010 08:22:30 +0100
Subject: [PATCH 387/728] drm/i915,agp/intel: Add second set of PCI-IDs for B43

There is a second revision of B43 (a desktop gen4 part) floating around,
functionally equivalent to the original B43, so simply add the new
PCI-IDs.

Bugzilla: https://bugs.freedesktop.org/show_bugs.cgi?id=30221
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/char/agp/intel-agp.c    | 2 ++
 drivers/char/agp/intel-agp.h    | 2 ++
 drivers/gpu/drm/i915/i915_drv.c | 1 +
 3 files changed, 5 insertions(+)

diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index eab58db5f91c..cd18493c9527 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -806,6 +806,8 @@ static const struct intel_driver_description {
 	    "G45/G43", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_B43_HB, PCI_DEVICE_ID_INTEL_B43_IG,
 	    "B43", NULL, &intel_i965_driver },
+	{ PCI_DEVICE_ID_INTEL_B43_1_HB, PCI_DEVICE_ID_INTEL_B43_1_IG,
+	    "B43", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG,
 	    "G41", NULL, &intel_i965_driver },
 	{ PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG,
diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h
index ee189c74d345..d09b1ab7e8ab 100644
--- a/drivers/char/agp/intel-agp.h
+++ b/drivers/char/agp/intel-agp.h
@@ -186,6 +186,8 @@
 #define PCI_DEVICE_ID_INTEL_Q33_IG          0x29D2
 #define PCI_DEVICE_ID_INTEL_B43_HB          0x2E40
 #define PCI_DEVICE_ID_INTEL_B43_IG          0x2E42
+#define PCI_DEVICE_ID_INTEL_B43_1_HB        0x2E90
+#define PCI_DEVICE_ID_INTEL_B43_1_IG        0x2E92
 #define PCI_DEVICE_ID_INTEL_GM45_HB         0x2A40
 #define PCI_DEVICE_ID_INTEL_GM45_IG         0x2A42
 #define PCI_DEVICE_ID_INTEL_EAGLELAKE_HB        0x2E00
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 216deb579785..6dbe14cc4f74 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -170,6 +170,7 @@ static const struct pci_device_id pciidlist[] = {		/* aka */
 	INTEL_VGA_DEVICE(0x2e22, &intel_g45_info),		/* G45_G */
 	INTEL_VGA_DEVICE(0x2e32, &intel_g45_info),		/* G41_G */
 	INTEL_VGA_DEVICE(0x2e42, &intel_g45_info),		/* B43_G */
+	INTEL_VGA_DEVICE(0x2e92, &intel_g45_info),		/* B43_G.1 */
 	INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
 	INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
 	INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),

From 99f76891a33d130776da3b01935d978b1e75fe68 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 13 Sep 2010 13:38:55 +0100
Subject: [PATCH 388/728] ARM: 6375/1: plat-nomadik: MTU timer trivial bug fix

timer0 to 3 are all on mtu block 0, so don't calculate the clock event
rate based upon mtu block 1's clock speed.

Acked-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-nomadik/timer.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index ea3ca86c5283..d673888af18e 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -131,17 +131,12 @@ void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	struct clk *clk1;
 	u32 cr;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
 
-	clk1 = clk_get_sys("mtu1", NULL);
-	BUG_ON(IS_ERR(clk1));
-
 	clk_enable(clk0);
-	clk_enable(clk1);
 
 	/*
 	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
@@ -170,15 +165,8 @@ void __init nmdk_timer_init(void)
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
-	/* Timer 1 is used for events, fix according to rate */
-	cr = MTU_CRn_32BITS;
-	rate = clk_get_rate(clk1);
-	if (rate > 16 << 20) {
-		rate /= 16;
-		cr |= MTU_CRn_PRESCALE_16;
-	} else {
-		cr |= MTU_CRn_PRESCALE_1;
-	}
+	/* Timer 1 is used for events */
+
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
 
 	writel(cr | MTU_CRn_ONESHOT, mtu_base + MTU_CR(1)); /* off, currently */

From a0719f52d90aed5b82ecf2f3ed14bc4ced3d1a8a Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 13 Sep 2010 13:40:04 +0100
Subject: [PATCH 389/728] ARM: 6376/1: plat-nomadik: MTU: Change prescaler
 limit and comment updates

The prescaler 16 is now used only when the timer runs at 32 MHz
or more. Some comment updates as well.

Acked-by: Alessandro Rubini <rubini@unipv.it>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-nomadik/timer.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index d673888af18e..aedf9c1d645e 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-nomadik/timer.c
+ *  linux/arch/arm/plat-nomadik/timer.c
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
@@ -75,7 +75,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
 		cr = readl(mtu_base + MTU_CR(1));
 		writel(0, mtu_base + MTU_LR(1));
 		writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(1));
-		writel(0x2, mtu_base + MTU_IMSC);
+		writel(1 << 1, mtu_base + MTU_IMSC);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -131,7 +131,7 @@ void __init nmdk_timer_init(void)
 {
 	unsigned long rate;
 	struct clk *clk0;
-	u32 cr;
+	u32 cr = MTU_CRn_32BITS;
 
 	clk0 = clk_get_sys("mtu0", NULL);
 	BUG_ON(IS_ERR(clk0));
@@ -139,12 +139,15 @@ void __init nmdk_timer_init(void)
 	clk_enable(clk0);
 
 	/*
-	 * Tick rate is 2.4MHz for Nomadik and 110MHz for ux500:
-	 * use a divide-by-16 counter if it's more than 16MHz
+	 * Tick rate is 2.4MHz for Nomadik and 2.4Mhz, 100MHz or 133 MHz
+	 * for ux500.
+	 * Use a divide-by-16 counter if the tick rate is more than 32MHz.
+	 * At 32 MHz, the timer (with 32 bit counter) can be programmed
+	 * to wake-up at a max 127s a head in time. Dividing a 2.4 MHz timer
+	 * with 16 gives too low timer resolution.
 	 */
-	cr = MTU_CRn_32BITS;;
 	rate = clk_get_rate(clk0);
-	if (rate > 16 << 20) {
+	if (rate > 32000000) {
 		rate /= 16;
 		cr |= MTU_CRn_PRESCALE_16;
 	} else {

From 63f469324f999a28e67b90eb27a5fe0e379b7064 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Mon, 13 Sep 2010 13:44:47 +0100
Subject: [PATCH 390/728] ARM: 6377/1: supply _cansleep gpio function to U300

We have to use _cansleep gpio accessors in the MMCI driver so as
to avoid slowpath warnings, now U300 has MMCI but doesn't have
these functions in place to siply wrap the existing non-sleeping
functions into sleepable variants.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-u300/include/mach/gpio.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index 7b1fc984abb6..d5a71abcbaea 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -273,6 +273,9 @@ extern void gpio_pullup(unsigned gpio, int value);
 extern int gpio_get_value(unsigned gpio);
 extern void gpio_set_value(unsigned gpio, int value);
 
+#define gpio_get_value_cansleep gpio_get_value
+#define gpio_set_value_cansleep gpio_set_value
+
 /* wrappers to sleep-enable the previous two functions */
 static inline unsigned gpio_to_irq(unsigned gpio)
 {

From 6491848d1ab246f6d243ddef25085fc1d836ff2c Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 14 Sep 2010 09:50:03 +0100
Subject: [PATCH 391/728] ARM: 6387/1: errata: check primary part ID in
 proc-v7.S

Kconfig doesn't have any knowledge of specific v7 cores, so it is possible
to select errata workarounds that may cause inadvertent behaviour when
executed on a core other than those targetted by the fix.

This patch improves the variant and revision checking in proc-v7.S so
that the primary part number is also considered when applying errata
workarounds.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/proc-v7.S | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 6a8506d99ee9..1f16f9e3f441 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -204,8 +204,13 @@ __v7_setup:
 	bne	2f
 	and	r5, r0, #0x00f00000		@ variant
 	and	r6, r0, #0x0000000f		@ revision
-	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+	orr	r6, r6, r5, lsr #20-4		@ combine variant and revision
+	ubfx	r0, r0, #4, #12			@ primary part number
 
+	/* Cortex-A8 Errata */
+	ldr	r10, =0x00000c08		@ Cortex-A8 primary part number
+	teq	r0, r10
+	bne	2f
 #ifdef CONFIG_ARM_ERRATA_430973
 	teq	r5, #0x00100000			@ only present in r1p*
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
@@ -213,14 +218,14 @@ __v7_setup:
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
 	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
 	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
 	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	teq	r0, #0x20			@ only present in r2p0
+	teq	r6, #0x20			@ only present in r2p0
 	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
 	tsteq	r10, #1 << 22
 	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit

From 9f05027c7cb3cfe56a31892bd83391138d41a667 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 14 Sep 2010 09:51:43 +0100
Subject: [PATCH 392/728] ARM: 6388/1: errata: DMB operation may be faulty

On versions of the Cortex-A9 up to and including r2p2, under rare
circumstances, a DMB instruction between 2 write operations may not
ensure the correct visibility ordering of the 2 writes.

This workaround sets a bit in the diagnostic register of the Cortex-A9,
causing the DMB instruction to behave like a DSB, which functions
correctly on the affected cores.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig      | 12 ++++++++++++
 arch/arm/mm/proc-v7.S | 16 ++++++++++++++--
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 553b7cf17bfb..ab14c0a5d21e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1051,6 +1051,18 @@ config ARM_ERRATA_460075
 	  ACTLR register. Note that setting specific bits in the ACTLR register
 	  may not be available in non-secure mode.
 
+config ARM_ERRATA_742230
+	bool "ARM errata: DMB operation may be faulty"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742230 Cortex-A9
+	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
+	  between two write operations may not ensure the correct visibility
+	  ordering of the two writes. This workaround sets a specific bit in
+	  the diagnostic register of the Cortex-A9 which causes the DMB
+	  instruction to behave as a DSB, ensuring the correct behaviour of
+	  the two writes.
+
 config PL310_ERRATA_588369
 	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0 && ARCH_OMAP4
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 1f16f9e3f441..945f36341fa6 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -201,7 +201,7 @@ __v7_setup:
 	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
 	and	r10, r0, #0xff000000		@ ARM?
 	teq	r10, #0x41000000
-	bne	2f
+	bne	3f
 	and	r5, r0, #0x00f00000		@ variant
 	and	r6, r0, #0x0000000f		@ revision
 	orr	r6, r6, r5, lsr #20-4		@ combine variant and revision
@@ -231,8 +231,20 @@ __v7_setup:
 	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
 	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
+	b	3f
 
-2:	mov	r10, #0
+	/* Cortex-A9 Errata */
+2:	ldr	r10, =0x00000c09		@ Cortex-A9 primary part number
+	teq	r0, r10
+	bne	3f
+#ifdef CONFIG_ARM_ERRATA_742230
+	cmp	r6, #0x22			@ only present up to r2p2
+	mrcle	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orrle	r10, r10, #1 << 4		@ set bit #4
+	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
+
+3:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif

From a672e99b129e286df2e2697a1b603d82321117f3 Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Tue, 14 Sep 2010 09:53:02 +0100
Subject: [PATCH 393/728] ARM: 6389/1: errata: incorrect hazard handling in the
 SCU may lead to data corruption

On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption
can occur if a shared cache line is replaced on one CPU as another CPU
is accessing it.

This workaround sets two bits in the diagnostic register of the Cortex-A9,
reducing the linefill issuing capabilities of the processor and
avoiding the erroneous behaviour.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig      | 14 ++++++++++++++
 arch/arm/mm/proc-v7.S |  9 +++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ab14c0a5d21e..0f89335b84c2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1063,6 +1063,20 @@ config ARM_ERRATA_742230
 	  instruction to behave as a DSB, ensuring the correct behaviour of
 	  the two writes.
 
+config ARM_ERRATA_742231
+	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 742231 Cortex-A9
+	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
+	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
+	  accessing some data located in the same cache line, may get corrupted
+	  data due to bad handling of the address hazard when the line gets
+	  replaced from one of the CPUs at the same time as another CPU is
+	  accessing it. This workaround sets specific bits in the diagnostic
+	  register of the Cortex-A9 which reduces the linefill issuing
+	  capabilities of the processor.
+
 config PL310_ERRATA_588369
 	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0 && ARCH_OMAP4
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 945f36341fa6..080129263eef 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -243,6 +243,15 @@ __v7_setup:
 	orrle	r10, r10, #1 << 4		@ set bit #4
 	mcrle	p15, 0, r10, c15, c0, 1		@ write diagnostic register
 #endif
+#ifdef CONFIG_ARM_ERRATA_742231
+	teq	r6, #0x20			@ present in r2p0
+	teqne	r6, #0x21			@ present in r2p1
+	teqne	r6, #0x22			@ present in r2p2
+	mrceq	p15, 0, r10, c15, c0, 1		@ read diagnostic register
+	orreq	r10, r10, #1 << 12		@ set bit #12
+	orreq	r10, r10, #1 << 22		@ set bit #22
+	mcreq	p15, 0, r10, c15, c0, 1		@ write diagnostic register
+#endif
 
 3:	mov	r10, #0
 #ifdef HARVARD_CACHE

From 1a8e41cd672f894bbd74874eac601e6cedf838fb Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 16 Sep 2010 17:57:17 +0100
Subject: [PATCH 394/728] ARM: 6395/1: VExpress: Set bit 22 in the PL310 (cache
 controller) AuxCtlr register

Clearing bit 22 in the PL310 Auxiliary Control register (shared
attribute override enable) has the side effect of transforming Normal
Shared Non-cacheable reads into Cacheable no-allocate reads.

Coherent DMA buffers in Linux always have a Cacheable alias via the
kernel linear mapping and the processor can speculatively load cache
lines into the PL310 controller. With bit 22 cleared, Non-cacheable
reads would unexpectedly hit such cache lines leading to buffer
corruption.

Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-vexpress/ct-ca9x4.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 577df6cccb08..1c9c13e9d074 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -227,7 +227,7 @@ static void ct_ca9x4_init(void)
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00000000, 0xfe0fffff);
+	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00400000, 0xfe0fffff);
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));

From 5f4874903df3562b9d5649fc1cf7b8c6bb238e42 Mon Sep 17 00:00:00 2001
From: Steven Whitehouse <swhiteho@redhat.com>
Date: Thu, 9 Sep 2010 14:45:00 +0100
Subject: [PATCH 395/728] GFS2: gfs2_logd should be using interruptible waits

Looks like this crept in, in a recent update.

Reported-by:  Krzysztof Urbaniak <urban@bash.org.pl>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
---
 fs/gfs2/log.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index cde1248a6225..ac750bd31a6f 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -932,7 +932,7 @@ int gfs2_logd(void *data)
 
 		do {
 			prepare_to_wait(&sdp->sd_logd_waitq, &wait,
-					TASK_UNINTERRUPTIBLE);
+					TASK_INTERRUPTIBLE);
 			if (!gfs2_ail_flush_reqd(sdp) &&
 			    !gfs2_jrnl_flush_reqd(sdp) &&
 			    !kthread_should_stop())

From b2b163bb82b12bae2504a5b31399c37d099ad3cc Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 17 Sep 2010 14:56:16 +0100
Subject: [PATCH 396/728] ARM: prevent multiple syscall restarts

Al Viro reports that calling "sys_sigsuspend(-ERESTARTNOHAND, 0, 0)"
with two signals coming and being handled in kernel space results
in the syscall restart being done twice.

Avoid this by clearing the 'why' flag when we call the signal handling
code to prevent further syscall restarts after the first.

Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/entry-common.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index f05a35a59694..4a560d30793d 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -48,6 +48,8 @@ work_pending:
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
+	tst	r1, #_TIF_SIGPENDING		@ delivering a signal?
+	movne	why, #0				@ prevent further restarts
 	bl	do_notify_resume
 	b	ret_slow_syscall		@ Check work again
 

From e835124c2be289515b918f2688ced4249e2de566 Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Fri, 17 Sep 2010 08:03:08 -0700
Subject: [PATCH 397/728] ceph: only send one flushsnap per cap_snap per mds
 session

Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once.  It's also a waste.

So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/caps.c  | 19 +++++++++++++++----
 fs/ceph/snap.c  |  2 +-
 fs/ceph/super.h |  3 ++-
 3 files changed, 18 insertions(+), 6 deletions(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 9fbe9019155c..b01c316a8148 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1195,10 +1195,14 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
  * asynchronously back to the MDS once sync writes complete and dirty
  * data is written out.
  *
+ * Unless @again is true, skip cap_snaps that were already sent to
+ * the MDS (i.e., during this session).
+ *
  * Called under i_lock.  Takes s_mutex as needed.
  */
 void __ceph_flush_snaps(struct ceph_inode_info *ci,
-			struct ceph_mds_session **psession)
+			struct ceph_mds_session **psession,
+			int again)
 		__releases(ci->vfs_inode->i_lock)
 		__acquires(ci->vfs_inode->i_lock)
 {
@@ -1240,6 +1244,13 @@ retry:
 			dout("no auth cap (migrating?), doing nothing\n");
 			goto out;
 		}
+
+		/* only flush each capsnap once */
+		if (!again && !list_empty(&capsnap->flushing_item)) {
+			dout("already flushed %p, skipping\n", capsnap);
+			continue;
+		}
+
 		mds = ci->i_auth_cap->session->s_mds;
 		mseq = ci->i_auth_cap->mseq;
 
@@ -1314,7 +1325,7 @@ static void ceph_flush_snaps(struct ceph_inode_info *ci)
 	struct inode *inode = &ci->vfs_inode;
 
 	spin_lock(&inode->i_lock);
-	__ceph_flush_snaps(ci, NULL);
+	__ceph_flush_snaps(ci, NULL, 0);
 	spin_unlock(&inode->i_lock);
 }
 
@@ -1477,7 +1488,7 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 
 	/* flush snaps first time around only */
 	if (!list_empty(&ci->i_cap_snaps))
-		__ceph_flush_snaps(ci, &session);
+		__ceph_flush_snaps(ci, &session, 0);
 	goto retry_locked;
 retry:
 	spin_lock(&inode->i_lock);
@@ -1894,7 +1905,7 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc,
 		if (cap && cap->session == session) {
 			dout("kick_flushing_caps %p cap %p capsnap %p\n", inode,
 			     cap, capsnap);
-			__ceph_flush_snaps(ci, &session);
+			__ceph_flush_snaps(ci, &session, 1);
 		} else {
 			pr_err("%p auth cap %p not mds%d ???\n", inode,
 			       cap, session->s_mds);
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 9e6eef14b7df..190b6c4a6f2b 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -717,7 +717,7 @@ static void flush_snaps(struct ceph_mds_client *mdsc)
 		igrab(inode);
 		spin_unlock(&mdsc->snap_flush_lock);
 		spin_lock(&inode->i_lock);
-		__ceph_flush_snaps(ci, &session);
+		__ceph_flush_snaps(ci, &session, 0);
 		spin_unlock(&inode->i_lock);
 		iput(inode);
 		spin_lock(&mdsc->snap_flush_lock);
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index c80bfbe27b05..b87638e84c4b 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -828,7 +828,8 @@ extern void ceph_put_cap_refs(struct ceph_inode_info *ci, int had);
 extern void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
 				       struct ceph_snap_context *snapc);
 extern void __ceph_flush_snaps(struct ceph_inode_info *ci,
-			       struct ceph_mds_session **psession);
+			       struct ceph_mds_session **psession,
+			       int again);
 extern void ceph_check_caps(struct ceph_inode_info *ci, int flags,
 			    struct ceph_mds_session *session);
 extern void ceph_check_delayed_caps(struct ceph_mds_client *mdsc);

From 5facb097137e7509a1b73448fe20226a4fbfe8cb Mon Sep 17 00:00:00 2001
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Date: Fri, 17 Sep 2010 17:24:10 +0200
Subject: [PATCH 398/728] hwmon: (lis3lv02d) Prevent NULL pointer dereference

If CONFIG_PM was selected and lis3lv02d_platform_data was NULL,
the kernel will be panic when halt command run.

Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Sigend-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lis3lv02d_i2c.c | 4 ++--
 drivers/hwmon/lis3lv02d_spi.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index dc1f5402c1d7..8e5933b72d19 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -121,7 +121,7 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
 {
 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
 
-	if (!lis3->pdata->wakeup_flags)
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
 		lis3lv02d_poweroff(lis3);
 	return 0;
 }
@@ -130,7 +130,7 @@ static int lis3lv02d_i2c_resume(struct i2c_client *client)
 {
 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
 
-	if (!lis3->pdata->wakeup_flags)
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
 		lis3lv02d_poweron(lis3);
 	return 0;
 }
diff --git a/drivers/hwmon/lis3lv02d_spi.c b/drivers/hwmon/lis3lv02d_spi.c
index 82b16808a274..b9be5e3a22b3 100644
--- a/drivers/hwmon/lis3lv02d_spi.c
+++ b/drivers/hwmon/lis3lv02d_spi.c
@@ -92,7 +92,7 @@ static int lis3lv02d_spi_suspend(struct spi_device *spi, pm_message_t mesg)
 {
 	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
 
-	if (!lis3->pdata->wakeup_flags)
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
 		lis3lv02d_poweroff(&lis3_dev);
 
 	return 0;
@@ -102,7 +102,7 @@ static int lis3lv02d_spi_resume(struct spi_device *spi)
 {
 	struct lis3lv02d *lis3 = spi_get_drvdata(spi);
 
-	if (!lis3->pdata->wakeup_flags)
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
 		lis3lv02d_poweron(lis3);
 
 	return 0;

From 9e012c1acc1fd617a708c00ff1fdaa847f9faf67 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Fri, 17 Sep 2010 17:24:11 +0200
Subject: [PATCH 399/728] hwmon: New subsystem maintainers

Guenter Roeck volunteered to adopt the hwmon subsystem as long as he
wasn't the only maintainer. As this was also my own condition, we can
add the two of us as co-maintainers of the hwmon subsystem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 MAINTAINERS | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index e7c528ff1013..8540dea232af 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2657,9 +2657,12 @@ S:	Maintained
 F:	drivers/media/video/gspca/
 
 HARDWARE MONITORING
+M:	Jean Delvare <khali@linux-fr.org>
+M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
-S:	Orphan
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+S:	Maintained
 F:	Documentation/hwmon/
 F:	drivers/hwmon/
 F:	include/linux/hwmon*.h

From 96f3640894012be7dd15a384566bfdc18297bc6c Mon Sep 17 00:00:00 2001
From: Guillem Jover <guillem@hadrons.org>
Date: Fri, 17 Sep 2010 17:24:11 +0200
Subject: [PATCH 400/728] hwmon: (f75375s) Shift control mode to the correct
 bit position

The spec notes that fan0 and fan1 control mode bits are located in bits
7-6 and 5-4 respectively, but the FAN_CTRL_MODE macro was making the
bits shift by 5 instead of by 4.

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/f75375s.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 0f58ecc5334d..e5828c009d91 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -79,7 +79,7 @@ enum chips { f75373, f75375 };
 #define F75375_REG_PWM2_DROP_DUTY	0x6C
 
 #define FAN_CTRL_LINEAR(nr)		(4 + nr)
-#define FAN_CTRL_MODE(nr)		(5 + ((nr) * 2))
+#define FAN_CTRL_MODE(nr)		(4 + ((nr) * 2))
 
 /*
  * Data structures and manipulation thereof

From c3b327d60bbba3f5ff8fd87d1efc0e95eb6c121b Mon Sep 17 00:00:00 2001
From: Guillem Jover <guillem@hadrons.org>
Date: Fri, 17 Sep 2010 17:24:12 +0200
Subject: [PATCH 401/728] hwmon: (f75375s) Do not overwrite values read from
 registers

All bits in the values read from registers to be used for the next
write were getting overwritten, avoid doing so to not mess with the
current configuration.

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/f75375s.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index e5828c009d91..9638d58f99fd 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -298,7 +298,7 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
 		return -EINVAL;
 
 	fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
-	fanmode = ~(3 << FAN_CTRL_MODE(nr));
+	fanmode &= ~(3 << FAN_CTRL_MODE(nr));
 
 	switch (val) {
 	case 0: /* Full speed */
@@ -350,7 +350,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
 
 	mutex_lock(&data->update_lock);
 	conf = f75375_read8(client, F75375_REG_CONFIG1);
-	conf = ~(1 << FAN_CTRL_LINEAR(nr));
+	conf &= ~(1 << FAN_CTRL_LINEAR(nr));
 
 	if (val == 0)
 		conf |= (1 << FAN_CTRL_LINEAR(nr)) ;

From f17c811d1433aa1966f9c5a744841427e9a97ecf Mon Sep 17 00:00:00 2001
From: Yong Wang <yong.y.wang@linux.intel.com>
Date: Fri, 17 Sep 2010 17:24:12 +0200
Subject: [PATCH 402/728] hwmon: (emc1403) Remove unnecessary
 hwmon_device_unregister

It is unnecessary and wrong to call hwmon_device_unregister in error
handling before hwmon_device_register is called.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/emc1403.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/hwmon/emc1403.c b/drivers/hwmon/emc1403.c
index 5b58b20dead1..8dee3f38fdfb 100644
--- a/drivers/hwmon/emc1403.c
+++ b/drivers/hwmon/emc1403.c
@@ -308,7 +308,6 @@ static int emc1403_probe(struct i2c_client *client,
 	res = sysfs_create_group(&client->dev.kobj, &m_thermal_gr);
 	if (res) {
 		dev_warn(&client->dev, "create group failed\n");
-		hwmon_device_unregister(data->hwmon_dev);
 		goto thermal_error1;
 	}
 	data->hwmon_dev = hwmon_device_register(&client->dev);

From 022b75a3df2b5aeeb70c5d51bc1fe55722fdd759 Mon Sep 17 00:00:00 2001
From: Jonas Jonsson <jonas@ludd.ltu.se>
Date: Fri, 17 Sep 2010 17:24:13 +0200
Subject: [PATCH 403/728] hwmon: (w83627ehf) Use proper exit sequence

According to the datasheet for Winbond W83627DHG the proper way to exit
the Extended Function Mode is to write 0xaa to the EFER(0x2e or 0x4e).

Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/w83627ehf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index e96e69dd36fb..072c58008a63 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -127,6 +127,7 @@ superio_enter(int ioreg)
 static inline void
 superio_exit(int ioreg)
 {
+	outb(0xaa, ioreg);
 	outb(0x02, ioreg);
 	outb(0x02, ioreg + 1);
 }

From a51b9944a1aaca34c9061d3973663fee54e9d1c1 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Fri, 17 Sep 2010 17:24:14 +0200
Subject: [PATCH 404/728] hwmon: (adm1031) Replace update_rate sysfs attribute
 with update_interval

The attribute reflects an interval, not a rate.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 Documentation/hwmon/sysfs-interface |  7 ++---
 drivers/hwmon/adm1031.c             | 43 ++++++++++++++++-------------
 2 files changed, 27 insertions(+), 23 deletions(-)

diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index ff45d1f837c8..48ceabedf55d 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -91,12 +91,11 @@ name		The chip name.
 		I2C devices get this attribute created automatically.
 		RO
 
-update_rate	The rate at which the chip will update readings.
+update_interval	The interval at which the chip will update readings.
 		Unit: millisecond
 		RW
-		Some devices have a variable update rate. This attribute
-		can be used to change the update rate to the desired
-		frequency.
+		Some devices have a variable update rate or interval.
+		This attribute can be used to change it to the desired value.
 
 
 ************
diff --git a/drivers/hwmon/adm1031.c b/drivers/hwmon/adm1031.c
index 15c1a9616af3..0683e6be662c 100644
--- a/drivers/hwmon/adm1031.c
+++ b/drivers/hwmon/adm1031.c
@@ -79,7 +79,7 @@ struct adm1031_data {
 	int chip_type;
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
-	unsigned int update_rate;	/* In milliseconds */
+	unsigned int update_interval;	/* In milliseconds */
 	/* The chan_select_table contains the possible configurations for
 	 * auto fan control.
 	 */
@@ -743,23 +743,23 @@ static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 12);
 static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 13);
 static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, 14);
 
-/* Update Rate */
-static const unsigned int update_rates[] = {
+/* Update Interval */
+static const unsigned int update_intervals[] = {
 	16000, 8000, 4000, 2000, 1000, 500, 250, 125,
 };
 
-static ssize_t show_update_rate(struct device *dev,
-				struct device_attribute *attr, char *buf)
+static ssize_t show_update_interval(struct device *dev,
+				    struct device_attribute *attr, char *buf)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1031_data *data = i2c_get_clientdata(client);
 
-	return sprintf(buf, "%u\n", data->update_rate);
+	return sprintf(buf, "%u\n", data->update_interval);
 }
 
-static ssize_t set_update_rate(struct device *dev,
-			       struct device_attribute *attr,
-			       const char *buf, size_t count)
+static ssize_t set_update_interval(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1031_data *data = i2c_get_clientdata(client);
@@ -771,12 +771,15 @@ static ssize_t set_update_rate(struct device *dev,
 	if (err)
 		return err;
 
-	/* find the nearest update rate from the table */
-	for (i = 0; i < ARRAY_SIZE(update_rates) - 1; i++) {
-		if (val >= update_rates[i])
+	/*
+	 * Find the nearest update interval from the table.
+	 * Use it to determine the matching update rate.
+	 */
+	for (i = 0; i < ARRAY_SIZE(update_intervals) - 1; i++) {
+		if (val >= update_intervals[i])
 			break;
 	}
-	/* if not found, we point to the last entry (lowest update rate) */
+	/* if not found, we point to the last entry (lowest update interval) */
 
 	/* set the new update rate while preserving other settings */
 	reg = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
@@ -785,14 +788,14 @@ static ssize_t set_update_rate(struct device *dev,
 	adm1031_write_value(client, ADM1031_REG_FAN_FILTER, reg);
 
 	mutex_lock(&data->update_lock);
-	data->update_rate = update_rates[i];
+	data->update_interval = update_intervals[i];
 	mutex_unlock(&data->update_lock);
 
 	return count;
 }
 
-static DEVICE_ATTR(update_rate, S_IRUGO | S_IWUSR, show_update_rate,
-		   set_update_rate);
+static DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR, show_update_interval,
+		   set_update_interval);
 
 static struct attribute *adm1031_attributes[] = {
 	&sensor_dev_attr_fan1_input.dev_attr.attr,
@@ -830,7 +833,7 @@ static struct attribute *adm1031_attributes[] = {
 
 	&sensor_dev_attr_auto_fan1_min_pwm.dev_attr.attr,
 
-	&dev_attr_update_rate.attr,
+	&dev_attr_update_interval.attr,
 	&dev_attr_alarms.attr,
 
 	NULL
@@ -981,7 +984,8 @@ static void adm1031_init_client(struct i2c_client *client)
 	mask = ADM1031_UPDATE_RATE_MASK;
 	read_val = adm1031_read_value(client, ADM1031_REG_FAN_FILTER);
 	i = (read_val & mask) >> ADM1031_UPDATE_RATE_SHIFT;
-	data->update_rate = update_rates[i];
+	/* Save it as update interval */
+	data->update_interval = update_intervals[i];
 }
 
 static struct adm1031_data *adm1031_update_device(struct device *dev)
@@ -993,7 +997,8 @@ static struct adm1031_data *adm1031_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	next_update = data->last_updated + msecs_to_jiffies(data->update_rate);
+	next_update = data->last_updated
+	  + msecs_to_jiffies(data->update_interval);
 	if (time_after(jiffies, next_update) || !data->valid) {
 
 		dev_dbg(&client->dev, "Starting adm1031 update\n");

From bc482bf0ce918b39a1fa60b9341f1add9318d833 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Fri, 17 Sep 2010 17:24:15 +0200
Subject: [PATCH 405/728] hwmon: (lm95241) Replace rate sysfs attribute with
 update_interval

update_interval is the matching attribute defined in the hwmon sysfs ABI.
Use it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/lm95241.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 94741d42112d..464340f25496 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -91,7 +91,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev);
 struct lm95241_data {
 	struct device *hwmon_dev;
 	struct mutex update_lock;
-	unsigned long last_updated, rate; /* in jiffies */
+	unsigned long last_updated, interval; /* in jiffies */
 	char valid; /* zero until following fields are valid */
 	/* registers values */
 	u8 local_h, local_l; /* local */
@@ -114,23 +114,23 @@ show_temp(local);
 show_temp(remote1);
 show_temp(remote2);
 
-static ssize_t show_rate(struct device *dev, struct device_attribute *attr,
+static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
 	struct lm95241_data *data = lm95241_update_device(dev);
 
-	snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->rate / HZ);
+	snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval / HZ);
 	return strlen(buf);
 }
 
-static ssize_t set_rate(struct device *dev, struct device_attribute *attr,
+static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 			const char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm95241_data *data = i2c_get_clientdata(client);
 
-	strict_strtol(buf, 10, &data->rate);
-	data->rate = data->rate * HZ / 1000;
+	strict_strtol(buf, 10, &data->interval);
+	data->interval = data->interval * HZ / 1000;
 
 	return count;
 }
@@ -286,7 +286,8 @@ static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min1, set_min1);
 static DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min2, set_min2);
 static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max1, set_max1);
 static DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max2, set_max2);
-static DEVICE_ATTR(rate, S_IWUSR | S_IRUGO, show_rate, set_rate);
+static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
+		   set_interval);
 
 static struct attribute *lm95241_attributes[] = {
 	&dev_attr_temp1_input.attr,
@@ -298,7 +299,7 @@ static struct attribute *lm95241_attributes[] = {
 	&dev_attr_temp3_min.attr,
 	&dev_attr_temp2_max.attr,
 	&dev_attr_temp3_max.attr,
-	&dev_attr_rate.attr,
+	&dev_attr_update_interval.attr,
 	NULL
 };
 
@@ -376,7 +377,7 @@ static void lm95241_init_client(struct i2c_client *client)
 {
 	struct lm95241_data *data = i2c_get_clientdata(client);
 
-	data->rate = HZ;    /* 1 sec default */
+	data->interval = HZ;    /* 1 sec default */
 	data->valid = 0;
 	data->config = CFG_CR0076;
 	data->model = 0;
@@ -410,7 +411,7 @@ static struct lm95241_data *lm95241_update_device(struct device *dev)
 
 	mutex_lock(&data->update_lock);
 
-	if (time_after(jiffies, data->last_updated + data->rate) ||
+	if (time_after(jiffies, data->last_updated + data->interval) ||
 	    !data->valid) {
 		dev_dbg(&client->dev, "Updating lm95241 data.\n");
 		data->local_h =

From 14eff1812679c76564b775aa95cdd378965f6cfb Mon Sep 17 00:00:00 2001
From: Daniel Walker <dwalker@fifo99.com>
Date: Fri, 17 Sep 2010 16:42:10 +0100
Subject: [PATCH 406/728] ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9
 from ARM

Setting of these bits can cause issues on other SMP SoC's not produced
by ARM.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/proc-v7.S | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 080129263eef..7563ff0141bd 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -186,13 +186,14 @@ cpu_v7_name:
  *	It is assumed that:
  *	- cache type register is implemented
  */
-__v7_setup:
+__v7_ca9mp_setup:
 #ifdef CONFIG_SMP
 	mrc	p15, 0, r0, c1, c0, 1
 	tst	r0, #(1 << 6)			@ SMP/nAMP mode enabled?
 	orreq	r0, r0, #(1 << 6) | (1 << 0)	@ Enable SMP/nAMP mode and
 	mcreq	p15, 0, r0, c1, c0, 1		@ TLB ops broadcasting
 #endif
+__v7_setup:
 	adr	r12, __v7_setup_stack		@ the local stack
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
@@ -349,6 +350,29 @@ cpu_elf_name:
 
 	.section ".proc.info.init", #alloc, #execinstr
 
+	.type   __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+	.long	0x410fc090		@ Required ID value
+	.long	0xff0ffff0		@ Mask for ID
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v7_ca9mp_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_v7_name
+	.long	v7_processor_functions
+	.long	v7wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v7_cache_fns
+	.size	__v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+
 	/*
 	 * Match any ARMv7 processor core.
 	 */

From a43fb73101eaf6db0b33d22c152b338ab8b3edbb Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Fri, 17 Sep 2010 09:54:08 -0700
Subject: [PATCH 407/728] ceph: check mapping to determine if FILE_CACHE cap is
 used

See if the i_data mapping has any pages to determine if the FILE_CACHE
capability is currently in use, instead of assuming it is any time the
rdcache_gen value is set (i.e., issued -> used).

This allows the MDS RECALL_STATE process work for inodes that have cached
pages.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/caps.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index b01c316a8148..73c153092f72 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -814,7 +814,7 @@ int __ceph_caps_used(struct ceph_inode_info *ci)
 		used |= CEPH_CAP_PIN;
 	if (ci->i_rd_ref)
 		used |= CEPH_CAP_FILE_RD;
-	if (ci->i_rdcache_ref || ci->i_rdcache_gen)
+	if (ci->i_rdcache_ref || ci->vfs_inode.i_data.nrpages)
 		used |= CEPH_CAP_FILE_CACHE;
 	if (ci->i_wr_ref)
 		used |= CEPH_CAP_FILE_WR;

From 653d48b22166db2d8b1515ebe6f9f0f7c95dfc86 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 17 Sep 2010 14:34:39 +0100
Subject: [PATCH 408/728] arm: fix really nasty sigreturn bug

If a signal hits us outside of a syscall and another gets delivered
when we are in sigreturn (e.g. because it had been in sa_mask for
the first one and got sent to us while we'd been in the first handler),
we have a chance of returning from the second handler to location one
insn prior to where we ought to return.  If r0 happens to contain -513
(-ERESTARTNOINTR), sigreturn will get confused into doing restart
syscall song and dance.

Incredible joy to debug, since it manifests as random, infrequent and
very hard to reproduce double execution of instructions in userland
code...

The fix is simple - mark it "don't bother with restarts" in wrapper,
i.e. set r8 to 0 in sys_sigreturn and sys_rt_sigreturn wrappers,
suppressing the syscall restart handling on return from these guys.
They can't legitimately return a restart-worthy error anyway.

Testcase:
	#include <unistd.h>
	#include <signal.h>
	#include <stdlib.h>
	#include <sys/time.h>
	#include <errno.h>

	void f(int n)
	{
		__asm__ __volatile__(
			"ldr r0, [%0]\n"
			"b 1f\n"
			"b 2f\n"
			"1:b .\n"
			"2:\n" : : "r"(&n));
	}

	void handler1(int sig) { }
	void handler2(int sig) { raise(1); }
	void handler3(int sig) { exit(0); }

	main()
	{
		struct sigaction s = {.sa_handler = handler2};
		struct itimerval t1 = { .it_value = {1} };
		struct itimerval t2 = { .it_value = {2} };

		signal(1, handler1);

		sigemptyset(&s.sa_mask);
		sigaddset(&s.sa_mask, 1);
		sigaction(SIGALRM, &s, NULL);

		signal(SIGVTALRM, handler3);

		setitimer(ITIMER_REAL, &t1, NULL);
		setitimer(ITIMER_VIRTUAL, &t2, NULL);

		f(-513); /* -ERESTARTNOINTR */

		write(1, "buggered\n", 9);
		return 1;
	}

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/kernel/entry-common.S | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index f05a35a59694..1b560825e1cf 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -418,11 +418,13 @@ ENDPROC(sys_clone_wrapper)
 
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_sigreturn
 ENDPROC(sys_sigreturn_wrapper)
 
 sys_rt_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
+		mov	why, #0		@ prevent syscall restart handling
 		b	sys_rt_sigreturn
 ENDPROC(sys_rt_sigreturn_wrapper)
 

From be4f104dfd3b5e3ae262bff607965cfc38027dec Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Fri, 17 Sep 2010 12:30:31 -0700
Subject: [PATCH 409/728] ceph: select CRYPTO

We select CRYPTO_AES, but not CRYPTO.

Signed-off-by: Sage Weil <sage@newdream.net>
---
 fs/ceph/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ceph/Kconfig b/fs/ceph/Kconfig
index bc87b9c1d27e..0fcd2640c23f 100644
--- a/fs/ceph/Kconfig
+++ b/fs/ceph/Kconfig
@@ -3,6 +3,7 @@ config CEPH_FS
 	depends on INET && EXPERIMENTAL
 	select LIBCRC32C
 	select CRYPTO_AES
+	select CRYPTO
 	help
 	  Choose Y or M here to include support for mounting the
 	  experimental Ceph distributed file system.  Ceph is an extremely

From 5343795fda222183c1f77d0f5870f2027713bb0d Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Sat, 18 Sep 2010 09:54:38 +0900
Subject: [PATCH 410/728] ARM: S3C64XX: Prototype SPI devices

Avoids build warnings due to the undeclared non-statics.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/dev-spi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index bfa3ef770bd8..405e62128917 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -22,6 +22,7 @@
 
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
+#include <plat/devs.h>
 
 static char *spi_src_clks[] = {
 	[S3C64XX_SPI_SRCCLK_PCLK] = "pclk",

From 591cd25ee35986184870c447ff5c12e78bc80699 Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Thu, 9 Sep 2010 21:40:22 +0900
Subject: [PATCH 411/728] ARM: S3C64XX: Fix coding style errors on
 mach-real6410

Fix errors reported by checkpatch.pl script

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-real6410.c | 104 +++++++++++++-------------
 1 file changed, 52 insertions(+), 52 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 5c07d013b23d..9f79e6bacb59 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -30,73 +30,73 @@
 #include <plat/devs.h>
 #include <plat/regs-serial.h>
 
-#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
 static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 	[3] = {
-		.hwport	     = 3,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
 	},
 };
 
 /* DM9000AEP 10/100 ethernet controller */
 
 static struct resource real6410_dm9k_resource[] = {
-        [0] = {
-                .start = S3C64XX_PA_XM0CSN1,
-                .end   = S3C64XX_PA_XM0CSN1 + 1,
-                .flags = IORESOURCE_MEM
-        },
-        [1] = {
-                .start = S3C64XX_PA_XM0CSN1 + 4,
-                .end   = S3C64XX_PA_XM0CSN1 + 5,
-                .flags = IORESOURCE_MEM
-        },
-        [2] = {
-                .start = S3C_EINT(7),
-                .end   = S3C_EINT(7),
-                .flags = IORESOURCE_IRQ,
-        }
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ,
+	}
 };
 
 static struct dm9000_plat_data real6410_dm9k_pdata = {
-        .flags          = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
 static struct platform_device real6410_device_eth = {
-        .name           = "dm9000",
-        .id             = -1,
-        .num_resources  = ARRAY_SIZE(real6410_dm9k_resource),
-        .resource       = real6410_dm9k_resource,
-        .dev            = {
-                .platform_data  = &real6410_dm9k_pdata,
-        },
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(real6410_dm9k_resource),
+	.resource	= real6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &real6410_dm9k_pdata,
+	},
 };
 
 static struct platform_device *real6410_devices[] __initdata = {
@@ -129,12 +129,12 @@ static void __init real6410_machine_init(void)
 	/* set timing for nCS1 suitable for ethernet chip */
 
 	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
-			(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
-			(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
-			(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
-			(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
-			(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
 
 	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
 }

From 4d89ecaae9c145e60b920acb1120f1de3d6eac6e Mon Sep 17 00:00:00 2001
From: Darius Augulis <augulis.darius@gmail.com>
Date: Thu, 9 Sep 2010 21:41:31 +0900
Subject: [PATCH 412/728] ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to
 dm9000 on mach-real6410

Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver
platform data in board mach-real6410.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 9f79e6bacb59..e130379ba0e8 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -81,7 +81,7 @@ static struct resource real6410_dm9k_resource[] = {
 	[2] = {
 		.start	= S3C_EINT(7),
 		.end	= S3C_EINT(7),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
 	}
 };
 

From 7cdffc86528ec9c55c83c649b6d64cadeb558136 Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Sat, 18 Sep 2010 10:19:13 +0200
Subject: [PATCH 413/728] pcmcia: preserve configuration information if
 request_io fails partly

If pcmcia_request_io() only fails partly -- for the second of two
requested resources -- preserve the configuration settings for the
first one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/pcmcia_resource.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index a5c176598d95..9ba4dade69a4 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -595,7 +595,13 @@ int pcmcia_request_io(struct pcmcia_device *p_dev)
 	if (c->io[1].end) {
 		ret = alloc_io_space(s, &c->io[1], p_dev->io_lines);
 		if (ret) {
+			struct resource tmp = c->io[0];
+			/* release the previously allocated resource */
 			release_io_space(s, &c->io[0]);
+			/* but preserve the settings, for they worked... */
+			c->io[0].end = resource_size(&tmp);
+			c->io[0].start = tmp.start;
+			c->io[0].flags = tmp.flags;
 			goto out;
 		}
 	} else

From 50aff040363d31f87e94f38f1710973d99489951 Mon Sep 17 00:00:00 2001
From: Wu Fengguang <fengguang.wu@intel.com>
Date: Sat, 21 Aug 2010 14:40:20 +0800
Subject: [PATCH 414/728] ocfs2/net: fix uninitialized ret in
 o2net_send_message_vec()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

mmotm/fs/ocfs2/cluster/tcp.c: In function ‘o2net_send_message_vec’:
mmotm/fs/ocfs2/cluster/tcp.c:980:6: warning: ‘ret’ may be used uninitialized in this function

It seems a real bug introduced by commit 9af0b38ff3 (ocfs2/net:
Use wait_event() in o2net_send_message_vec()).

cc: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/cluster/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 1361997cf205..cbe2f057cc28 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -977,7 +977,7 @@ static int o2net_tx_can_proceed(struct o2net_node *nn,
 int o2net_send_message_vec(u32 msg_type, u32 key, struct kvec *caller_vec,
 			   size_t caller_veclen, u8 target_node, int *status)
 {
-	int ret;
+	int ret = 0;
 	struct o2net_msg *msg = NULL;
 	size_t veclen, caller_bytes = 0;
 	struct kvec *vec = NULL;

From 31019075f41c785eff7f38c62e4c700af019fdb7 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Tue, 14 Sep 2010 04:23:47 -0400
Subject: [PATCH 415/728] alpha: Use static const char * const where possible

Acked-by: Richard Henderson  <rth@twiddle.net>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/err_ev6.c    | 12 +++++++-----
 arch/alpha/kernel/err_marvel.c | 33 ++++++++++++++++----------------
 arch/alpha/kernel/err_titan.c  | 35 +++++++++++++++++++---------------
 arch/alpha/kernel/osf_sys.c    |  4 ++--
 4 files changed, 46 insertions(+), 38 deletions(-)

diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c
index 8ca6345bf131..253cf1a87481 100644
--- a/arch/alpha/kernel/err_ev6.c
+++ b/arch/alpha/kernel/err_ev6.c
@@ -90,11 +90,13 @@ static int
 ev6_parse_cbox(u64 c_addr, u64 c1_syn, u64 c2_syn, 
 	       u64 c_stat, u64 c_sts, int print)
 {
-	char *sourcename[] = { "UNKNOWN", "UNKNOWN", "UNKNOWN",
-			       "MEMORY", "BCACHE", "DCACHE", 
-			       "BCACHE PROBE", "BCACHE PROBE" };
-	char *streamname[] = { "D", "I" };
-	char *bitsname[] = { "SINGLE", "DOUBLE" };
+	static const char * const sourcename[] = {
+		"UNKNOWN", "UNKNOWN", "UNKNOWN",
+		"MEMORY", "BCACHE", "DCACHE",
+		"BCACHE PROBE", "BCACHE PROBE"
+	};
+	static const char * const streamname[] = { "D", "I" };
+	static const char * const bitsname[] = { "SINGLE", "DOUBLE" };
 	int status = MCHK_DISPOSITION_REPORT;
 	int source = -1, stream = -1, bits = -1;
 
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
index 5c905aaaeccd..648ae88aeb8a 100644
--- a/arch/alpha/kernel/err_marvel.c
+++ b/arch/alpha/kernel/err_marvel.c
@@ -589,22 +589,23 @@ marvel_print_pox_spl_cmplt(u64 spl_cmplt)
 static void
 marvel_print_pox_trans_sum(u64 trans_sum)
 {
-	char *pcix_cmd[] = { "Interrupt Acknowledge",
-			     "Special Cycle",
-			     "I/O Read",
-			     "I/O Write",
-			     "Reserved",
-			     "Reserved / Device ID Message",
-			     "Memory Read",
-			     "Memory Write",
-			     "Reserved / Alias to Memory Read Block",
-			     "Reserved / Alias to Memory Write Block",
-			     "Configuration Read",
-			     "Configuration Write",
-			     "Memory Read Multiple / Split Completion",
-			     "Dual Address Cycle",
-			     "Memory Read Line / Memory Read Block",
-			     "Memory Write and Invalidate / Memory Write Block"
+	static const char * const pcix_cmd[] = {
+		"Interrupt Acknowledge",
+		"Special Cycle",
+		"I/O Read",
+		"I/O Write",
+		"Reserved",
+		"Reserved / Device ID Message",
+		"Memory Read",
+		"Memory Write",
+		"Reserved / Alias to Memory Read Block",
+		"Reserved / Alias to Memory Write Block",
+		"Configuration Read",
+		"Configuration Write",
+		"Memory Read Multiple / Split Completion",
+		"Dual Address Cycle",
+		"Memory Read Line / Memory Read Block",
+		"Memory Write and Invalidate / Memory Write Block"
 	};
 
 #define IO7__POX_TRANSUM__PCI_ADDR__S		(0)
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index f7ed97ce0dfd..c3b3781a03de 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -75,8 +75,12 @@ titan_parse_p_serror(int which, u64 serror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *serror_src[] = {"GPCI", "APCI", "AGP HP", "AGP LP"};
-	char *serror_cmd[] = {"DMA Read", "DMA RMW", "SGTE Read", "Reserved"};
+	static const char * const serror_src[] = {
+		"GPCI", "APCI", "AGP HP", "AGP LP"
+	};
+	static const char * const serror_cmd[] = {
+		"DMA Read", "DMA RMW", "SGTE Read", "Reserved"
+	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
 #define TITAN__PCHIP_SERROR__LOST_UECC	(1UL << 0)
@@ -140,14 +144,15 @@ titan_parse_p_perror(int which, int port, u64 perror, int print)
 	int status = MCHK_DISPOSITION_REPORT;
 
 #ifdef CONFIG_VERBOSE_MCHECK
-	char *perror_cmd[] = { "Interrupt Acknowledge", "Special Cycle",
-			       "I/O Read",	       	"I/O Write",
-			       "Reserved",	       	"Reserved",
-			       "Memory Read",		"Memory Write",
-			       "Reserved",		"Reserved",
-			       "Configuration Read",	"Configuration Write",
-			       "Memory Read Multiple",	"Dual Address Cycle",
-			       "Memory Read Line","Memory Write and Invalidate"
+	static const char * const perror_cmd[] = {
+		"Interrupt Acknowledge", "Special Cycle",
+		"I/O Read",		"I/O Write",
+		"Reserved",		"Reserved",
+		"Memory Read",		"Memory Write",
+		"Reserved",		"Reserved",
+		"Configuration Read",	"Configuration Write",
+		"Memory Read Multiple",	"Dual Address Cycle",
+		"Memory Read Line",	"Memory Write and Invalidate"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
@@ -273,11 +278,11 @@ titan_parse_p_agperror(int which, u64 agperror, int print)
 	int cmd, len;
 	unsigned long addr;
 
-	char *agperror_cmd[] = { "Read (low-priority)",	"Read (high-priority)",
-				 "Write (low-priority)",
-				 "Write (high-priority)",
-				 "Reserved",		"Reserved",
-				 "Flush",		"Fence"
+	static const char * const agperror_cmd[] = {
+		"Read (low-priority)",	"Read (high-priority)",
+		"Write (low-priority)",	"Write (high-priority)",
+		"Reserved",		"Reserved",
+		"Flush",		"Fence"
 	};
 #endif /* CONFIG_VERBOSE_MCHECK */
 
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 5d1e6d6ce684..16bc1f5df3e2 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -594,7 +594,7 @@ SYSCALL_DEFINE2(osf_sigstack, struct sigstack __user *, uss,
 
 SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 {
-	char *sysinfo_table[] = {
+	const char *sysinfo_table[] = {
 		utsname()->sysname,
 		utsname()->nodename,
 		utsname()->release,
@@ -606,7 +606,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count)
 		"dummy",	/* secure RPC domain */
 	};
 	unsigned long offset;
-	char *res;
+	const char *res;
 	long len, err = -EINVAL;
 
 	offset = command-1;

From af96f8a340525f24abecc25848a07fff7636a53e Mon Sep 17 00:00:00 2001
From: matt mooney <mfm@muteddisk.com>
Date: Tue, 14 Sep 2010 05:27:39 -0400
Subject: [PATCH 416/728] alpha: remove unnecessary cast from void* in
 assignment.

Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/pci-sysfs.c | 2 +-
 arch/alpha/kernel/srm_env.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 738fc824e2ea..b899e95f79fd 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -66,7 +66,7 @@ static int pci_mmap_resource(struct kobject *kobj,
 {
 	struct pci_dev *pdev = to_pci_dev(container_of(kobj,
 						       struct device, kobj));
-	struct resource *res = (struct resource *)attr->private;
+	struct resource *res = attr->private;
 	enum pci_mmap_state mmap_type;
 	struct pci_bus_region bar;
 	int i;
diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c
index 4afc1a1e2e5a..f0df3fbd8402 100644
--- a/arch/alpha/kernel/srm_env.c
+++ b/arch/alpha/kernel/srm_env.c
@@ -87,7 +87,7 @@ static int srm_env_proc_show(struct seq_file *m, void *v)
 	srm_env_t	*entry;
 	char		*page;
 
-	entry = (srm_env_t *)m->private;
+	entry = m->private;
 	page = (char *)__get_free_page(GFP_USER);
 	if (!page)
 		return -ENOMEM;

From b97f897d60c34adb9a5a37a14033e6a867e86f48 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 14 Sep 2010 09:00:22 -0400
Subject: [PATCH 417/728] alpha: fix build breakage in asm/cacheflush.h

Alpha SMP flush_icache_user_range() is implemented as an inline
function inside include/asm/cacheflush.h.  It dereferences @current
but doesn't include linux/sched.h and thus causes build failure if
linux/sched.h wasn't included previously.  Fix it by including the
needed header file explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/include/asm/cacheflush.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/alpha/include/asm/cacheflush.h b/arch/alpha/include/asm/cacheflush.h
index 01d71e1c8a9e..012f1243b1c1 100644
--- a/arch/alpha/include/asm/cacheflush.h
+++ b/arch/alpha/include/asm/cacheflush.h
@@ -43,6 +43,8 @@ extern void smp_imb(void);
 /* ??? Ought to use this in arch/alpha/kernel/signal.c too.  */
 
 #ifndef CONFIG_SMP
+#include <linux/sched.h>
+
 extern void __load_new_mm_context(struct mm_struct *);
 static inline void
 flush_icache_user_range(struct vm_area_struct *vma, struct page *page,

From 12e750d956eec8b1778679aff705f617095c46c8 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Tue, 14 Sep 2010 19:34:56 -0400
Subject: [PATCH 418/728] alpha: kill big kernel lock

All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/osf_sys.c | 5 -----
 arch/alpha/kernel/traps.c   | 3 ---
 2 files changed, 8 deletions(-)

diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 16bc1f5df3e2..547e8b84b2f7 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/syscalls.h>
 #include <linux/unistd.h>
@@ -69,7 +68,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 {
 	struct mm_struct *mm;
 
-	lock_kernel();
 	mm = current->mm;
 	mm->end_code = bss_start + bss_len;
 	mm->start_brk = bss_start + bss_len;
@@ -78,7 +76,6 @@ SYSCALL_DEFINE4(osf_set_program_attributes, unsigned long, text_start,
 	printk("set_program_attributes(%lx %lx %lx %lx)\n",
 		text_start, text_len, bss_start, bss_len);
 #endif
-	unlock_kernel();
 	return 0;
 }
 
@@ -517,7 +514,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 	long error;
 	int __user *min_buf_size_ptr;
 
-	lock_kernel();
 	switch (code) {
 	case PL_SET:
 		if (get_user(error, &args->set.nbytes))
@@ -547,7 +543,6 @@ SYSCALL_DEFINE2(osf_proplist_syscall, enum pl_code, code,
 		error = -EOPNOTSUPP;
 		break;
 	};
-	unlock_kernel();
 	return error;
 }
 
diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c
index b14f015008ad..0414e021a91c 100644
--- a/arch/alpha/kernel/traps.c
+++ b/arch/alpha/kernel/traps.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kallsyms.h>
@@ -623,7 +622,6 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg,
 		return;
 	}
 
-	lock_kernel();
 	printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
 		pc, va, opcode, reg);
 	do_exit(SIGSEGV);
@@ -646,7 +644,6 @@ got_exception:
 	 * Yikes!  No one to forward the exception to.
 	 * Since the registers are in a weird format, dump them ourselves.
  	 */
-	lock_kernel();
 
 	printk("%s(%d): unhandled unaligned exception\n",
 	       current->comm, task_pid_nr(current));

From 531f0474bf889d489b28ea4b15e87b7cbb77f580 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Thu, 16 Sep 2010 14:12:55 -0400
Subject: [PATCH 419/728] alpha: wire up fanotify and prlimit64 syscalls

The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/include/asm/unistd.h | 5 ++++-
 arch/alpha/kernel/systbls.S     | 3 +++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 804e5311c841..9a9672f0a346 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -449,10 +449,13 @@
 #define __NR_pwritev			491
 #define __NR_rt_tgsigqueueinfo		492
 #define __NR_perf_event_open		493
+#define __NR_fanotify_init		494
+#define __NR_fanotify_mark		495
+#define __NR_prlimit64			496
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			494
+#define NR_SYSCALLS			497
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 09acb786e72b..ce594ef533cc 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -512,6 +512,9 @@ sys_call_table:
 	.quad sys_pwritev
 	.quad sys_rt_tgsigqueueinfo
 	.quad sys_perf_event_open
+	.quad sys_fanotify_init
+	.quad sys_fanotify_mark				/* 495 */
+	.quad sys_prlimit64
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

From bdc8b8914b17cf97b53e5f7af8168d68cfb089d6 Mon Sep 17 00:00:00 2001
From: Michael Cree <mcree@orcon.net.nz>
Date: Sun, 19 Sep 2010 02:05:40 -0400
Subject: [PATCH 420/728] alpha: Shift perf event pending work earlier in timer
 interrupt

Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/time.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index eacceb26d9c8..396af1799ea4 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -191,16 +191,16 @@ irqreturn_t timer_interrupt(int irq, void *dev)
 
 	write_sequnlock(&xtime_lock);
 
-#ifndef CONFIG_SMP
-	while (nticks--)
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-
 	if (test_perf_event_pending()) {
 		clear_perf_event_pending();
 		perf_event_do_pending();
 	}
 
+#ifndef CONFIG_SMP
+	while (nticks--)
+		update_process_times(user_mode(get_irq_regs()));
+#endif
+
 	return IRQ_HANDLED;
 }
 

From 2deba1bd7126aadb5750beb927c878a6490065e6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Sep 2010 08:38:47 -0400
Subject: [PATCH 421/728] alpha: belated ERESTART_RESTARTBLOCK race fix

same thing as had been done on other targets back in 2003 -
move setting ->restart_block.fn into {rt_,}sigreturn().

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/signal.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 0932dbb1ef8e..e5b1b3c79ff3 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -239,6 +239,8 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 	unsigned long usp;
 	long i, err = __get_user(regs->pc, &sc->sc_pc);
 
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	sw->r26 = (unsigned long) ret_from_sys_call;
 
 	err |= __get_user(regs->r0, sc->sc_regs+0);
@@ -591,7 +593,6 @@ syscall_restart(unsigned long r0, unsigned long r19,
 		regs->pc -= 4;
 		break;
 	case ERESTART_RESTARTBLOCK:
-		current_thread_info()->restart_block.fn = do_no_restart_syscall;
 		regs->r0 = EINTR;
 		break;
 	}

From 392fb6e35400edbee183baba24b34a0fa2053813 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Sep 2010 08:40:07 -0400
Subject: [PATCH 422/728] alpha: unb0rk sigsuspend() and rt_sigsuspend()

Old code used to set regs->r0 and regs->r19 to force the right
return value.  Leaving that after switch to ERESTARTNOHAND
was a Bad Idea(tm), since now that screws the restart - if we
hit the case when get_signal_to_deliver() returns 0, we will
step back to syscall insn, with v0 set to EINTR and a3 to 1.
The latter won't matter, since EINTR is 4, aka __NR_write.

Testcase:

	#include <signal.h>
	#define _GNU_SOURCE
	#include <unistd.h>
	#include <sys/syscall.h>

	main()
	{
		sigset_t mask;
		sigemptyset(&mask);
		sigaddset(&mask, SIGCONT);
		sigprocmask(SIG_SETMASK, &mask, NULL);
		kill(0, SIGCONT);
		syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
	}

results on alpha in immediate message to stdout...

Fix is obvious; moreover, since we don't need regs anymore, we can
switch to normal prototypes for these guys and lose the wrappers.
Even better, rt_sigsuspend() is identical to generic version in
kernel/signal.c now.

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/include/asm/unistd.h |  1 +
 arch/alpha/kernel/entry.S       | 32 ---------------------------
 arch/alpha/kernel/signal.c      | 38 +--------------------------------
 3 files changed, 2 insertions(+), 69 deletions(-)

diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h
index 9a9672f0a346..058937bf5a77 100644
--- a/arch/alpha/include/asm/unistd.h
+++ b/arch/alpha/include/asm/unistd.h
@@ -466,6 +466,7 @@
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 /* "Conditional" syscalls.  What we want is
 
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index b45d913a51c3..bceb325fd4c5 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -778,38 +778,6 @@ sys_rt_sigreturn:
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 
-	.align	4
-	.globl	sys_sigsuspend
-	.ent	sys_sigsuspend
-sys_sigsuspend:
-	.prologue 0
-	mov	$sp, $17
-	br	$1, do_switch_stack
-	mov	$sp, $18
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_sigsuspend
-
-	.align	4
-	.globl	sys_rt_sigsuspend
-	.ent	sys_rt_sigsuspend
-sys_rt_sigsuspend:
-	.prologue 0
-	mov	$sp, $18
-	br	$1, do_switch_stack
-	mov	$sp, $19
-	subq	$sp, 16, $sp
-	stq	$26, 0($sp)
-	jsr	$26, do_rt_sigsuspend
-	ldq	$26, 0($sp)
-	lda	$sp, SWITCH_STACK_SIZE+16($sp)
-	ret
-.end sys_rt_sigsuspend
-
 	.align	4
 	.globl	sys_sethae
 	.ent	sys_sethae
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index e5b1b3c79ff3..0f6b51ae865a 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -144,8 +144,7 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int
-do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
+SYSCALL_DEFINE1(sigsuspend, old_sigset_t, mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -154,41 +153,6 @@ do_sigsuspend(old_sigset_t mask, struct pt_regs *regs, struct switch_stack *sw)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-asmlinkage int
-do_rt_sigsuspend(sigset_t __user *uset, size_t sigsetsize,
-		 struct pt_regs *regs, struct switch_stack *sw)
-{
-	sigset_t set;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-	if (copy_from_user(&set, uset, sizeof(set)))
-		return -EFAULT;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/* Indicate EINTR on return from any possible signal handler,
-	   which will not come back through here, but via sigreturn.  */
-	regs->r0 = EINTR;
-	regs->r19 = 1;
-
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);

From 53293638618f1a8b0b182dfedaab08b28930f992 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Sep 2010 08:41:16 -0400
Subject: [PATCH 423/728] alpha: fix a 14 years old bug in sigreturn tracing

The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.

What happens is direct return to ret_from_syscall, in order to bypass
mangling of a3 (error indicator) and prevent other mutilations of
registers (e.g. by syscall restart).  That's fine, but... the entire
TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
stopping/notifying the tracer is after the syscall.  And the normal
path we are forcibly switching to doesn't have it.

So we end up with *one* stop in traced sigreturn() vs. two in other
syscalls.  And yes, strace is visibly broken by that; try to strace
the following
	#include <signal.h>
	#include <stdio.h>
	void f(int sig) {}
	main()
	{
		signal(SIGHUP, f);
		raise(SIGHUP);
		write(1, "eeeek\n", 6);
	}
and watch the show.  The
	close(1)                                = 405
in the end of strace output is coming from return value of write() (6 ==
__NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
405 there).

The fix is fairly simple - the only thing we end up missing is the call
of syscall_trace() and we can tell whether we'd been called from the
SYSCALL_TRACE path by checking ra value.  Since we are setting the
switch_stack up (that's what sys_sigreturn() does), we have the right
environment for calling syscall_trace() - just before we call
undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
s0 anyway, we can use it to store the result of "has it been called from
SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/entry.S | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index bceb325fd4c5..a3e9cd85cfee 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -430,6 +430,7 @@ strace:
 	beq	$1, 1f
 	ldq	$27, 0($2)
 1:	jsr	$26, ($27), sys_gettimeofday
+ret_from_straced:
 	ldgp	$gp, 0($26)
 
 	/* check return.. */
@@ -757,11 +758,15 @@ sys_vfork:
 	.ent	sys_sigreturn
 sys_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_sigreturn
 
@@ -770,11 +775,15 @@ sys_sigreturn:
 	.ent	sys_rt_sigreturn
 sys_rt_sigreturn:
 	.prologue 0
+	lda	$9, ret_from_straced
+	cmpult	$26, $9, $9
 	mov	$sp, $17
 	lda	$18, -SWITCH_STACK_SIZE($sp)
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
 	jsr	$26, do_rt_sigreturn
-	br	$1, undo_switch_stack
+	bne	$9, 1f
+	jsr	$26, syscall_trace
+1:	br	$1, undo_switch_stack
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 

From 494486a1d2697f2153199b6501ab5b4d6e15a2bb Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 18 Sep 2010 08:42:27 -0400
Subject: [PATCH 424/728] alpha: deal with multiple simultaneously pending
 signals

Unlike the other targets, alpha sets _one_ sigframe and
buggers off until the next syscall/interrupt, even if
more signals are pending.  It leads to quite a few unpleasant
inconsistencies, starting with SIGSEGV potentially arriving
not where it should and including e.g. mess with sigsuspend();
consider two pending signals blocked until sigsuspend()
unblocks them.  We pick the first one; then, if we are hit
by interrupt while in the handler, we process the second one
as well.  If we are not, and if no syscalls had been made,
we get out of the first handler and leave the second signal
pending; normally sigreturn() would've picked it anyway, but
here it starts with restoring the original mask and voila -
the second signal is blocked again.  On everything else we
get both delivered consistently.

It's actually easy to fix; the only thing to watch out for
is prevention of double syscall restart.  Fortunately, the
idea I've nicked from arm fix by rmk works just fine...

Testcase demonstrating the behaviour in question; on alpha
we get one or both flags set (usually one), on everything
else both are always set.
	#include <signal.h>
	#include <stdio.h>
	int had1, had2;
	void f1(int sig) { had1 = 1; }
	void f2(int sig) { had2 = 1; }
	main()
	{
		sigset_t set1, set2;
		sigemptyset(&set1);
		sigemptyset(&set2);
		sigaddset(&set2, 1);
		sigaddset(&set2, 2);
		signal(1, f1);
		signal(2, f2);
		sigprocmask(SIG_SETMASK, &set2, NULL);
		raise(1);
		raise(2);
		sigsuspend(&set1);
		printf("had1:%d had2:%d\n", had1, had2);
	}

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
 arch/alpha/kernel/entry.S | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index a3e9cd85cfee..ab1ee0ab082b 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -317,14 +317,14 @@ ret_from_sys_call:
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
 	beq	$0, restore_all
-ret_from_reschedule:
+ret_to_user:
 	/* Make sure need_resched and sigpending don't change between
 		sampling and the rti.  */
 	lda	$16, 7
 	call_pal PAL_swpipl
 	ldl	$5, TI_FLAGS($8)
 	and	$5, _TIF_WORK_MASK, $2
-	bne	$5, work_pending
+	bne	$2, work_pending
 restore_all:
 	RESTORE_ALL
 	call_pal PAL_rti
@@ -363,7 +363,7 @@ $ret_success:
  *       $8: current.
  *      $19: The old syscall number, or zero if this is not a return
  *           from a syscall that errored and is possibly restartable.
- *      $20: Error indication.
+ *      $20: The old a3 value
  */
 
 	.align	4
@@ -392,12 +392,18 @@ $work_resched:
 
 $work_notifysig:
 	mov	$sp, $16
-	br	$1, do_switch_stack
+	bsr	$1, do_switch_stack
 	mov	$sp, $17
 	mov	$5, $18
+	mov	$19, $9		/* save old syscall number */
+	mov	$20, $10	/* save old a3 */
+	and	$5, _TIF_SIGPENDING, $2
+	cmovne	$2, 0, $9	/* we don't want double syscall restarts */
 	jsr	$26, do_notify_resume
+	mov	$9, $19
+	mov	$10, $20
 	bsr	$1, undo_switch_stack
-	br	restore_all
+	br	ret_to_user
 .end work_pending
 
 /*

From 79e27dc0677b969e2d53b76fa0fa58467cce946a Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Sat, 18 Sep 2010 19:55:10 +0100
Subject: [PATCH 425/728] ARM: 6400/1: at91: fix arch_gettimeoffset fallout

5cfc8ee0bb51 (ARM: convert arm to arch_gettimeoffset()) marked all of
at91 AND at91x40 as needing ARCH_USES_GETTIMEOFFSET, and hence no high
res timer support / accurate clock_gettime() - But only at91x40 needs it.

Cc: stable@kernel.org
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Acked-by: John Stultz <johnstul@us.ibm.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0f89335b84c2..88c97bc7a6f5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -271,7 +271,6 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.

From d907387c42e9e39261629890e45a08ef4c3ed3fe Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 13 Sep 2010 16:01:24 +0100
Subject: [PATCH 426/728] ARM: 6383/1: Implement phys_mem_access_prot() to
 avoid attributes aliasing

ARMv7 onwards requires that there are no aliases to the same physical
location using different memory types (i.e. Normal vs Strongly Ordered).
Access to SO mappings when the unaligned accesses are handled in
hardware is also Unpredictable (pgprot_noncached() mappings in user
space).

The /dev/mem driver requires uncached mappings with O_SYNC. The patch
implements the phys_mem_access_prot() function which generates Strongly
Ordered memory attributes if !pfn_valid() (independent of O_SYNC) and
Normal Noncacheable (writecombine) if O_SYNC.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h |  4 ++++
 arch/arm/mm/mmu.c              | 14 ++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index ab68cf1ef80f..e90b167ea848 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -317,6 +317,10 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 #ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
 #else
 #define pgprot_dmacoherent(prot) \
 	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 6e1c4f6a2b3f..a486bd0d97dc 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -15,6 +15,7 @@
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
 #include <linux/sort.h>
+#include <linux/fs.h>
 
 #include <asm/cputype.h>
 #include <asm/sections.h>
@@ -498,6 +499,19 @@ static void __init build_mem_type_table(void)
 	}
 }
 
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+			      unsigned long size, pgprot_t vma_prot)
+{
+	if (!pfn_valid(pfn))
+		return pgprot_noncached(vma_prot);
+	else if (file->f_flags & O_SYNC)
+		return pgprot_writecombine(vma_prot);
+	return vma_prot;
+}
+EXPORT_SYMBOL(phys_mem_access_prot);
+#endif
+
 #define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
 
 static void __init *early_alloc(unsigned long sz)

From cbfa5184cc5f58627f08c7fad225424f565b439d Mon Sep 17 00:00:00 2001
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Fri, 17 Sep 2010 12:30:11 +0200
Subject: [PATCH 427/728] ASoC: fix clkdev API usage in sh/migor.c

The clkdev API doesn't use .name and .id members of struct clk for clock
lookup. Instead clocks should be added to a lookup list. Without this patch
audio om the Migo-R board fails silently.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/sh/migor.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/sound/soc/sh/migor.c b/sound/soc/sh/migor.c
index b823a5c9b9bc..87e2b7fcbf17 100644
--- a/sound/soc/sh/migor.c
+++ b/sound/soc/sh/migor.c
@@ -12,6 +12,7 @@
 #include <linux/firmware.h>
 #include <linux/module.h>
 
+#include <asm/clkdev.h>
 #include <asm/clock.h>
 
 #include <cpu/sh7722.h>
@@ -40,12 +41,12 @@ static struct clk_ops siumckb_clk_ops = {
 };
 
 static struct clk siumckb_clk = {
-	.name		= "siumckb_clk",
-	.id		= -1,
 	.ops		= &siumckb_clk_ops,
 	.rate		= 0, /* initialised at run-time */
 };
 
+static struct clk_lookup *siumckb_lookup;
+
 static int migor_hw_params(struct snd_pcm_substream *substream,
 			   struct snd_pcm_hw_params *params)
 {
@@ -180,6 +181,13 @@ static int __init migor_init(void)
 	if (ret < 0)
 		return ret;
 
+	siumckb_lookup = clkdev_alloc(&siumckb_clk, "siumckb_clk", NULL);
+	if (!siumckb_lookup) {
+		ret = -ENOMEM;
+		goto eclkdevalloc;
+	}
+	clkdev_add(siumckb_lookup);
+
 	/* Port number used on this machine: port B */
 	migor_snd_device = platform_device_alloc("soc-audio", 1);
 	if (!migor_snd_device) {
@@ -200,12 +208,15 @@ static int __init migor_init(void)
 epdevadd:
 	platform_device_put(migor_snd_device);
 epdevalloc:
+	clkdev_drop(siumckb_lookup);
+eclkdevalloc:
 	clk_unregister(&siumckb_clk);
 	return ret;
 }
 
 static void __exit migor_exit(void)
 {
+	clkdev_drop(siumckb_lookup);
 	clk_unregister(&siumckb_clk);
 	platform_device_unregister(migor_snd_device);
 }

From d93c333dc867d04111c9dcebdbcaa9ae8b2d5c2d Mon Sep 17 00:00:00 2001
From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Sun, 19 Sep 2010 16:16:58 +0100
Subject: [PATCH 428/728] ARM: Fix build error when using KCONFIG_CONFIG

Jonathan Cameron reports that when using the environment
variable KCONFIG_CONFIG, he encounters this error:

make[2]: *** No rule to make target `.config', needed by `arch/arm/boot/compressed/vmlinux.lds'

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/boot/compressed/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index b23f6bc46cfa..65a7c1c588a9 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -116,5 +116,5 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
-$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
+$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
 	@sed "$(SEDFLAGS)" < $< > $@

From 112d421df2fddc0278584b084f4fcfedd144c5f4 Mon Sep 17 00:00:00 2001
From: Jan Harkes <jaharkes@cs.cmu.edu>
Date: Fri, 17 Sep 2010 23:26:01 -0400
Subject: [PATCH 429/728] Coda: mount hangs because of missed REQ_WRITE rename

Coda's REQ_* defines were renamed to avoid clashes with the block layer
(commit 4aeefdc69f7b: "coda: fixup clash with block layer REQ_*
defines").

However one was missed and response messages are no longer matched with
requests and waiting threads are no longer woken up.  This patch fixes
this.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
[ Also fixed up whitespace while at it  -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/coda/psdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index de89645777c7..116af7546cf0 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -184,8 +184,8 @@ static ssize_t coda_psdev_write(struct file *file, const char __user *buf,
 	}
 
 	/* adjust outsize. is this useful ?? */
-        req->uc_outSize = nbytes;	
-        req->uc_flags |= REQ_WRITE;
+	req->uc_outSize = nbytes;
+	req->uc_flags |= CODA_REQ_WRITE;
 	count = nbytes;
 
 	/* Convert filedescriptor into a file handle */

From e4ff1c39ee1122198e8355069da59297038e55bb Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Sun, 22 Aug 2010 22:49:46 +0200
Subject: [PATCH 430/728] ARM: kirkwood: Unbreak PCIe I/O port

The support for the 2 pcie port of the 6282 has broken i/o port by switching
*_IO_PHYS_BASE and *_IO_BUS_BASE. In fact, the patches reintroduced the same
bug solved by commit 35f029e2514be209eb0e88c7d927f3bcc42a5cc2.
So, I'm adding back *_IO_BUS_BASE in resource declaration and fix definition
of KIRKWOOD_PCIE1_IO_BUS_BASE. With this change, the xgi card on my t5325 is
working again.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Cc: stable@kernel.org
---
 arch/arm/mach-kirkwood/include/mach/kirkwood.h | 2 +-
 arch/arm/mach-kirkwood/pcie.c                  | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 93fc2ec95e76..6e924b398919 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -38,7 +38,7 @@
 
 #define KIRKWOOD_PCIE1_IO_PHYS_BASE	0xf3000000
 #define KIRKWOOD_PCIE1_IO_VIRT_BASE	0xfef00000
-#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE1_IO_BUS_BASE	0x00100000
 #define KIRKWOOD_PCIE1_IO_SIZE		SZ_1M
 
 #define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index 55e7f00836b7..513ad3102d7c 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -117,7 +117,7 @@ static void __init pcie0_ioresources_init(struct pcie_port *pp)
 	 * IORESOURCE_IO
 	 */
 	pp->res[0].name = "PCIe 0 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE;
+	pp->res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE;
 	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1;
 	pp->res[0].flags = IORESOURCE_IO;
 
@@ -139,7 +139,7 @@ static void __init pcie1_ioresources_init(struct pcie_port *pp)
 	 * IORESOURCE_IO
 	 */
 	pp->res[0].name = "PCIe 1 I/O Space";
-	pp->res[0].start = KIRKWOOD_PCIE1_IO_PHYS_BASE;
+	pp->res[0].start = KIRKWOOD_PCIE1_IO_BUS_BASE;
 	pp->res[0].end = pp->res[0].start + KIRKWOOD_PCIE1_IO_SIZE - 1;
 	pp->res[0].flags = IORESOURCE_IO;
 

From 863636828f1fcd9fdc15e24d620aa53cf18b432f Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Fri, 17 Sep 2010 23:33:51 +0200
Subject: [PATCH 431/728] dmaengine: fix interrupt clearing for mv_xor

When using simultaneously the two DMA channels on a same engine, some
transfers are never completed. For example, an endless lock can occur
while writing heavily on a RAID5 array (with async-tx offload support
enabled).

Note that this issue can also be reproduced by using the DMA test
client.

On a same engine, the interrupt cause register is shared between two
DMA channels. This patch make sure that the cause bit is only cleared
for the requested channel.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Tested-by: Luc Saillard <luc@saillard.org>
Acked-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 drivers/dma/mv_xor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 86c5ae9fde34..411d5bf50fc4 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -162,7 +162,7 @@ static int mv_is_err_intr(u32 intr_cause)
 
 static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
 {
-	u32 val = (1 << (1 + (chan->idx * 16)));
+	u32 val = ~(1 << (chan->idx * 16));
 	dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val);
 	__raw_writel(val, XOR_INTR_CAUSE(chan));
 }

From c4a90588fa07ea47df7a67fd6cb03d6bc0f99634 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@canonical.com>
Date: Tue, 14 Sep 2010 16:14:15 +0800
Subject: [PATCH 432/728] ARM: dove: fix __io() definition to use bus based
 offset

Signed-off-by: Eric Miao <eric.miao@canonical.com>
Acked-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 arch/arm/mach-dove/include/mach/io.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
index 3b3e4721ce2e..eb4936ff90ad 100644
--- a/arch/arm/mach-dove/include/mach/io.h
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -13,8 +13,8 @@
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
-				   DOVE_PCIE0_IO_VIRT_BASE))
-#define __mem_pci(a)		(a)
+#define __io(a)  	((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \
+						 DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)	(a)
 
 #endif

From f539dfedbd169e5ed47912bb517c75976ab556f3 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Sun, 19 Sep 2010 15:30:59 +0200
Subject: [PATCH 433/728] leds: leds-ns2: fix locking

This patch replace all the lock functions with the irq safe variant.
The ns2_led_{set,get}_mode() functions must be safe in all context.

For example, the trigger timer call led_set_brightness() in a softirq
context.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
---
 drivers/leds/leds-ns2.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/leds/leds-ns2.c b/drivers/leds/leds-ns2.c
index 74dce4ba0262..350eb34f049c 100644
--- a/drivers/leds/leds-ns2.c
+++ b/drivers/leds/leds-ns2.c
@@ -81,7 +81,7 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
 	int cmd_level;
 	int slow_level;
 
-	read_lock(&led_dat->rw_lock);
+	read_lock_irq(&led_dat->rw_lock);
 
 	cmd_level = gpio_get_value(led_dat->cmd);
 	slow_level = gpio_get_value(led_dat->slow);
@@ -95,7 +95,7 @@ static int ns2_led_get_mode(struct ns2_led_data *led_dat,
 		}
 	}
 
-	read_unlock(&led_dat->rw_lock);
+	read_unlock_irq(&led_dat->rw_lock);
 
 	return ret;
 }
@@ -104,8 +104,9 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
 			     enum ns2_led_modes mode)
 {
 	int i;
+	unsigned long flags;
 
-	write_lock(&led_dat->rw_lock);
+	write_lock_irqsave(&led_dat->rw_lock, flags);
 
 	for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
 		if (mode == ns2_led_modval[i].mode) {
@@ -116,7 +117,7 @@ static void ns2_led_set_mode(struct ns2_led_data *led_dat,
 		}
 	}
 
-	write_unlock(&led_dat->rw_lock);
+	write_unlock_irqrestore(&led_dat->rw_lock, flags);
 }
 
 static void ns2_led_set(struct led_classdev *led_cdev,

From 31c4a3d3a0f84a5847665f8aa0552d188389f791 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Sun, 19 Sep 2010 19:40:22 -0700
Subject: [PATCH 434/728] mm: further fix swapin race condition

Commit 4969c1192d15 ("mm: fix swapin race condition") is now agreed to
be incomplete.  There's a race, not very much less likely than the
original race envisaged, in which it is further necessary to check that
the swapcache page's swap has not changed.

Here's the reasoning: cast in terms of reuse_swap_page(), but probably
could be reformulated to rely on try_to_free_swap() instead, or on
swapoff+swapon.

A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and
comes through the lock_page(page1).

B, a racing thread of the same process, faults on the same address: does
page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but
for whatever reason is unlucky not to get the lock any time soon.

A carries on through do_swap_page(), a write fault, but cannot reuse the
swap page1 (another reference to swap1).  Unlocks the page1 (but B
doesn't get it yet), does COW in do_wp_page(), page2 now in that pte.

C, perhaps the parent of A+B, comes in and write faults the same swap
page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed.

kswapd comes in after some time (B still unlucky) and swaps out some
pages from A+B and C: it allocates the original swap1 to page2 in A+B,
and some other swap2 to the original page1 now in C.  But does not
immediately free page1 (actually it couldn't: B holds a reference),
leaving it in swap cache for now.

B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes.
Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been
given the swap1 which page1 used to have.  So B proceeds to insert page1
into A+B's page_table, though its content now belongs to C, quite
different from what A wrote there.

B ought to have checked that page1's swap was still swap1.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memory.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/mm/memory.c b/mm/memory.c
index 71b161b73bb5..0e18b4d649ec 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -2680,10 +2680,12 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
 	delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
 
 	/*
-	 * Make sure try_to_free_swap didn't release the swapcache
-	 * from under us. The page pin isn't enough to prevent that.
+	 * Make sure try_to_free_swap or reuse_swap_page or swapoff did not
+	 * release the swapcache from under us.  The page pin, and pte_same
+	 * test below, are not enough to exclude that.  Even if it is still
+	 * swapcache, we need to check that the page's swap has not changed.
 	 */
-	if (unlikely(!PageSwapCache(page)))
+	if (unlikely(!PageSwapCache(page) || page_private(page) != entry.val))
 		goto out_page;
 
 	if (ksm_might_need_to_copy(page, vma, address)) {

From 20cd514d0f3d288d968217028ca67b70e707d896 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Mon, 20 Sep 2010 15:13:04 +0100
Subject: [PATCH 435/728] frv: restart_block.fn needs to be reset on sigreturn

Reset restart_block.fn on executing a sigreturn such that any currently
pending system call restarts will be forced to return -EINTR.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/signal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 0974c0ecc594..7fc29615ef01 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -121,6 +121,9 @@ static int restore_sigcontext(struct sigcontext __user *sc, int *_gr8)
 	struct user_context *user = current->thread.user;
 	unsigned long tbr, psr;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	tbr = user->i.tbr;
 	psr = user->i.psr;
 	if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context)))

From 5f4ad04a1e805d14de080ff9d5384b4d20518a9a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Mon, 20 Sep 2010 15:13:09 +0100
Subject: [PATCH 436/728] frv: fix address verification holes in
 setup_frame/setup_rt_frame

a) sa_handler might be maliciously set to point to kernel memory;
   blindly dereferencing it in FDPIC case is a Bad Idea(tm).

b) I'm not sure you need that set_fs(USER_DS) there at all, but if you
   do, you'd better do it *before* checking the frame you've decided to
   use with access_ok(), lest sigaltstack() becomes a convenient
   roothole.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/signal.c | 38 ++++++++++++++++++++++----------------
 1 file changed, 22 insertions(+), 16 deletions(-)

diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 7fc29615ef01..5fb2d0661c78 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -253,6 +253,8 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 	struct sigframe __user *frame;
 	int rsig;
 
+	set_fs(USER_DS);
+
 	frame = get_sigframe(ka, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -296,22 +298,23 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 				   (unsigned long) (frame->retcode + 2));
 	}
 
-	/* set up registers for signal handler */
-	__frame->sp   = (unsigned long) frame;
-	__frame->lr   = (unsigned long) &frame->retcode;
-	__frame->gr8  = sig;
-
+	/* Set up registers for the signal handler */
 	if (current->personality & FDPIC_FUNCPTRS) {
 		struct fdpic_func_descriptor __user *funcptr =
 			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
-		__get_user(__frame->pc, &funcptr->text);
-		__get_user(__frame->gr15, &funcptr->GOT);
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
 	} else {
 		__frame->pc   = (unsigned long) ka->sa.sa_handler;
 		__frame->gr15 = 0;
 	}
 
-	set_fs(USER_DS);
+	__frame->sp   = (unsigned long) frame;
+	__frame->lr   = (unsigned long) &frame->retcode;
+	__frame->gr8  = sig;
 
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
@@ -341,6 +344,8 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	int rsig;
 
+	set_fs(USER_DS);
+
 	frame = get_sigframe(ka, sizeof(*frame));
 
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
@@ -395,22 +400,23 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	}
 
 	/* Set up registers for signal handler */
-	__frame->sp  = (unsigned long) frame;
-	__frame->lr   = (unsigned long) &frame->retcode;
-	__frame->gr8 = sig;
-	__frame->gr9 = (unsigned long) &frame->info;
-
 	if (current->personality & FDPIC_FUNCPTRS) {
 		struct fdpic_func_descriptor __user *funcptr =
 			(struct fdpic_func_descriptor __user *) ka->sa.sa_handler;
-		__get_user(__frame->pc, &funcptr->text);
-		__get_user(__frame->gr15, &funcptr->GOT);
+		struct fdpic_func_descriptor desc;
+		if (copy_from_user(&desc, funcptr, sizeof(desc)))
+			goto give_sigsegv;
+		__frame->pc = desc.text;
+		__frame->gr15 = desc.GOT;
 	} else {
 		__frame->pc   = (unsigned long) ka->sa.sa_handler;
 		__frame->gr15 = 0;
 	}
 
-	set_fs(USER_DS);
+	__frame->sp  = (unsigned long) frame;
+	__frame->lr  = (unsigned long) &frame->retcode;
+	__frame->gr8 = sig;
+	__frame->gr9 = (unsigned long) &frame->info;
 
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))

From ad0acab4557a91a60251b3ffe3478fad572d6f61 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Mon, 20 Sep 2010 15:13:14 +0100
Subject: [PATCH 437/728] frv: avoid infinite loop of SIGSEGV delivery

Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former
resets the SEGV handler pointer which will kill the process, rather than
leaving it open to an infinite loop if the SEGV handler itself caused a
SEGV signal.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 5fb2d0661c78..48203c68e39f 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -329,7 +329,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set)
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 
 } /* end setup_frame() */
@@ -431,7 +431,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 
 } /* end setup_rt_frame() */

From 44c7afffa429a7cdcd1755019ab76566ff41e66d Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Mon, 20 Sep 2010 15:13:19 +0100
Subject: [PATCH 438/728] frv: handling of restart into restart_syscall is
 fscked

do_signal() should place the syscall number in gr7, not gr8 when
handling ERESTART_WOULDBLOCK.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/signal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 48203c68e39f..bd13b57a5c9b 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -547,7 +547,7 @@ no_signal:
 			break;
 
 		case -ERESTART_RESTARTBLOCK:
-			__frame->gr8 = __NR_restart_syscall;
+			__frame->gr7 = __NR_restart_syscall;
 			__frame->pc -= 4;
 			break;
 		}

From ed1cde68365c1251b920900c51e73675ff38dc66 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Mon, 20 Sep 2010 15:13:25 +0100
Subject: [PATCH 439/728] frv: double syscall restarts, syscall restart in
 sigreturn()

We need to make sure that only the first do_signal() to be handled on
the way out syscall will bother with syscall restarts; additionally, the
check on the "signal has user handler" path had been wrong - compare
with restart prevention in sigreturn()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/frv/kernel/signal.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index bd13b57a5c9b..bab01298b58e 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -446,7 +446,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 	int ret;
 
 	/* Are we from a system call? */
-	if (in_syscall(__frame)) {
+	if (__frame->syscallno != -1) {
 		/* If so, check system call restarting.. */
 		switch (__frame->gr8) {
 		case -ERESTART_RESTARTBLOCK:
@@ -465,6 +465,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info,
 			__frame->gr8 = __frame->orig_gr8;
 			__frame->pc -= 4;
 		}
+		__frame->syscallno = -1;
 	}
 
 	/* Set up the stack frame */
@@ -551,6 +552,7 @@ no_signal:
 			__frame->pc -= 4;
 			break;
 		}
+		__frame->syscallno = -1;
 	}
 
 	/* if there's no signal to deliver, we just put the saved sigmask

From af6261031317f646d22f994c0b467521e47aa49f Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon, 20 Sep 2010 10:31:40 +0100
Subject: [PATCH 440/728] drm/i915: Hold a reference to the object whilst
 unbinding the eviction list

During heavy aperture thrashing we may be forced to wait upon several active
objects during eviction. The active list may be the last reference to
these objects and so the action of waiting upon one of them may cause
another to be freed (and itself unbound). To prevent the object
disappearing underneath us, we need to acquire and hold a reference
whilst unbinding.

This should fix the reported page refcount OOPS:

kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444!
...
RIP: 0010:[<ffffffffa0093026>]  [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915]
Call Trace:
 [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915]
 [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915]
 [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm]
 [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915]
 [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915]
 [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm]
 [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915]

Reported-by: Shawn Starr <shawn.starr@rogers.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem_evict.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index 72cae3cccad8..e85246ef691c 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -79,6 +79,7 @@ mark_free(struct drm_i915_gem_object *obj_priv,
 	   struct list_head *unwind)
 {
 	list_add(&obj_priv->evict_list, unwind);
+	drm_gem_object_reference(&obj_priv->base);
 	return drm_mm_scan_add_block(obj_priv->gtt_space);
 }
 
@@ -165,6 +166,7 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen
 	list_for_each_entry(obj_priv, &unwind_list, evict_list) {
 		ret = drm_mm_scan_remove_block(obj_priv->gtt_space);
 		BUG_ON(ret);
+		drm_gem_object_unreference(&obj_priv->base);
 	}
 
 	/* We expect the caller to unpin, evict all and try again, or give up.
@@ -181,18 +183,21 @@ found:
 			 * scanning, therefore store to be evicted objects on a
 			 * temporary list. */
 			list_move(&obj_priv->evict_list, &eviction_list);
-		}
+		} else
+			drm_gem_object_unreference(&obj_priv->base);
 	}
 
 	/* Unbinding will emit any required flushes */
 	list_for_each_entry_safe(obj_priv, tmp_obj_priv,
 				 &eviction_list, evict_list) {
 #if WATCH_LRU
-		DRM_INFO("%s: evicting %p\n", __func__, obj);
+		DRM_INFO("%s: evicting %p\n", __func__, &obj_priv->base);
 #endif
 		ret = i915_gem_object_unbind(&obj_priv->base);
 		if (ret)
 			return ret;
+
+		drm_gem_object_unreference(&obj_priv->base);
 	}
 
 	/* The just created free hole should be on the top of the free stack

From 024cfa5943a7e89565c60b612d698c2bfb3da66a Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.nyman@nokia.com>
Date: Mon, 6 Sep 2010 13:52:01 +0300
Subject: [PATCH 441/728] usb: musb_debugfs: don't use the struct file
 private_data field with seq_files

seq_files use the private_data field of a file struct for storing a seq_file structure,
data should be stored in seq_file's own private field (e.g. file->private_data->private)
Otherwise seq_release() will free the private data when the file is closed.

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_debugfs.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index c79a5e30d437..9e8639d4e862 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -195,15 +195,14 @@ static const struct file_operations musb_regdump_fops = {
 
 static int musb_test_mode_open(struct inode *inode, struct file *file)
 {
-	file->private_data = inode->i_private;
-
 	return single_open(file, musb_test_mode_show, inode->i_private);
 }
 
 static ssize_t musb_test_mode_write(struct file *file,
 		const char __user *ubuf, size_t count, loff_t *ppos)
 {
-	struct musb		*musb = file->private_data;
+	struct seq_file		*s = file->private_data;
+	struct musb		*musb = s->private;
 	u8			test = 0;
 	char			buf[18];
 

From fc9282506114d4be188a464af2d373db31dd781c Mon Sep 17 00:00:00 2001
From: Alek Du <alek.du@intel.com>
Date: Mon, 6 Sep 2010 14:50:57 +0100
Subject: [PATCH 442/728] USB: EHCI: Disable langwell/penwell LPM capability

We have to do so due to HW limitation.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/ehci-pci.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 58b72d741d93..a1e8d273103f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -119,6 +119,11 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			ehci->broken_periodic = 1;
 			ehci_info(ehci, "using broken periodic workaround\n");
 		}
+		if (pdev->device == 0x0806 || pdev->device == 0x0811
+				|| pdev->device == 0x0829) {
+			ehci_info(ehci, "disable lpm for langwell/penwell\n");
+			ehci->has_lpm = 0;
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {

From fc8f2a7608d855b911e35a33e771e6358c705c43 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 6 Sep 2010 23:27:09 +0800
Subject: [PATCH 443/728] USB: otg: twl4030: fix phy initialization(v1)

Commit 461c317705eca5cac09a360f488715927fd0a927(into 2.6.36-v3)
is put forward to power down phy if no usb cable is connected,
but does introduce the two issues below:

1), phy is not into work state if usb cable is connected
with PC during poweron, so musb device mode is not usable
in such case, follows the reasons:
	-twl4030_phy_resume is not called, so
		regulators are not enabled
		i2c access are not enabled
		usb mode not configurated

2), The kernel warings[1] of regulators 'unbalanced disables'
is caused if poweron without usb cable connected
with PC or b-device.

This patch fixes the two issues above:
	-power down phy only if no usb cable is connected with PC
and b-device
	-do phy initialization(via __twl4030_phy_resume) if usb cable
is connected with PC(vbus event) or another b-device(ID event) in
twl4030_usb_probe.

This patch also doesn't put VUSB3V1 LDO into active mode in
twl4030_usb_ldo_init until VBUS/ID change detected, so we can
save more power consumption than before.

This patch is verified OK on Beagle board either connected with
usb cable or not when poweron.

[1]. warnings of 'unbalanced disables' of regulators.
[root@OMAP3EVM /]# dmesg
------------[ cut here ]------------
WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128()
unbalanced disables for VUSB1V8
Modules linked in:
Backtrace:
[<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c)
 r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d
[<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c)
[<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40)
 r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb
 r4:c78e6c00
[<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128)
 r3:c0410e53 r2:c0410ad5
[<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38)
 r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00
[<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c)
 r5:c78595c0 r4:00000000
[<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c)
 r6:00000000 r5:c78595c0 r4:c78595c0
[<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c)
 r5:c78595c0 r4:00000040
[<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c)
 r6:00000000 r5:00000000 r4:c78595c0
[<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
 r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c78e663c r5:c78e6608 r4:c78e6608
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c)
[<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118)
 r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000
[<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c)
[<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4)
[<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190)
 r5:c7856e20 r4:c047c860
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c7856e54 r5:c7856e20 r4:c7856e20
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20)
[<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150)
 r5:c7856e00 r4:c7856e20
[<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4)
 r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0
[<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4)
 r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000
[<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8)
 r5:00000000 r4:c78fd000
[<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c)
 r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0
[<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84)
 r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000
[<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28)
 r6:c047e214 r5:c047e214 r4:c00270d0
[<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228)
[<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c)
[<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60)
 r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc
r4:c00270d0
[<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c)
[<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4)
[<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154)
[<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688)
 r5:c00083dc r4:00000000
---[ end trace 1b75b31a2719ed1d ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/otg/twl4030-usb.c | 82 ++++++++++++++++++++++-------------
 1 file changed, 53 insertions(+), 29 deletions(-)

diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 05aaac1c3861..0bc97698af15 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -347,11 +347,20 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
 	}
 }
 
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
+	u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+	if (on)
+		pwr &= ~PHY_PWR_PHYPWD;
+	else
+		pwr |= PHY_PWR_PHYPWD;
+
+	WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
 static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 {
-	u8 pwr;
-
-	pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
 	if (on) {
 		regulator_enable(twl->usb3v1);
 		regulator_enable(twl->usb1v8);
@@ -365,15 +374,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
 		twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
 							VUSB_DEDICATED2);
 		regulator_enable(twl->usb1v5);
-		pwr &= ~PHY_PWR_PHYPWD;
-		WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+		__twl4030_phy_power(twl, 1);
 		twl4030_usb_write(twl, PHY_CLK_CTRL,
 				  twl4030_usb_read(twl, PHY_CLK_CTRL) |
 					(PHY_CLK_CTRL_CLOCKGATING_EN |
 						PHY_CLK_CTRL_CLK32K_EN));
-	} else  {
-		pwr |= PHY_PWR_PHYPWD;
-		WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+	} else {
+		__twl4030_phy_power(twl, 0);
 		regulator_disable(twl->usb1v5);
 		regulator_disable(twl->usb1v8);
 		regulator_disable(twl->usb3v1);
@@ -387,19 +394,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
 
 	twl4030_phy_power(twl, 0);
 	twl->asleep = 1;
+	dev_dbg(twl->dev, "%s\n", __func__);
+}
+
+static void __twl4030_phy_resume(struct twl4030_usb *twl)
+{
+	twl4030_phy_power(twl, 1);
+	twl4030_i2c_access(twl, 1);
+	twl4030_usb_set_mode(twl, twl->usb_mode);
+	if (twl->usb_mode == T2_USB_MODE_ULPI)
+		twl4030_i2c_access(twl, 0);
 }
 
 static void twl4030_phy_resume(struct twl4030_usb *twl)
 {
 	if (!twl->asleep)
 		return;
-
-	twl4030_phy_power(twl, 1);
-	twl4030_i2c_access(twl, 1);
-	twl4030_usb_set_mode(twl, twl->usb_mode);
-	if (twl->usb_mode == T2_USB_MODE_ULPI)
-		twl4030_i2c_access(twl, 0);
+	__twl4030_phy_resume(twl);
 	twl->asleep = 0;
+	dev_dbg(twl->dev, "%s\n", __func__);
 }
 
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -408,8 +421,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
 	twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
 	twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
 
-	/* put VUSB3V1 LDO in active state */
-	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+	/* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
+	/*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
 
 	/* input to VUSB3V1 LDO is from VBAT, not VBUS */
 	twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
@@ -502,6 +515,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 	return IRQ_HANDLED;
 }
 
+static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+{
+	int status;
+
+	status = twl4030_usb_linkstat(twl);
+	if (status >= 0) {
+		if (status == USB_EVENT_NONE) {
+			__twl4030_phy_power(twl, 0);
+			twl->asleep = 1;
+		} else {
+			__twl4030_phy_resume(twl);
+			twl->asleep = 0;
+		}
+
+		blocking_notifier_call_chain(&twl->otg.notifier, status,
+				twl->otg.gadget);
+	}
+	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+}
+
 static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
 {
 	struct twl4030_usb *twl = xceiv_to_twl(x);
@@ -550,7 +583,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	struct twl4030_usb_data *pdata = pdev->dev.platform_data;
 	struct twl4030_usb	*twl;
 	int			status, err;
-	u8			pwr;
 
 	if (!pdata) {
 		dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -569,10 +601,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 	twl->otg.set_peripheral	= twl4030_set_peripheral;
 	twl->otg.set_suspend	= twl4030_set_suspend;
 	twl->usb_mode		= pdata->usb_mode;
-
-	pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
-	twl->asleep		= (pwr & PHY_PWR_PHYPWD);
+	twl->asleep = 1;
 
 	/* init spinlock for workqueue */
 	spin_lock_init(&twl->lock);
@@ -610,15 +639,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
 		return status;
 	}
 
-	/* The IRQ handler just handles changes from the previous states
-	 * of the ID and VBUS pins ... in probe() we must initialize that
-	 * previous state.  The easy way:  fake an IRQ.
-	 *
-	 * REVISIT:  a real IRQ might have happened already, if PREEMPT is
-	 * enabled.  Else the IRQ may not yet be configured or enabled,
-	 * because of scheduling delays.
+	/* Power down phy or make it work according to
+	 * current link state.
 	 */
-	twl4030_usb_irq(twl->irq, twl);
+	twl4030_usb_phy_init(twl);
 
 	dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
 	return 0;

From a0846f1868b11cd827bdfeaf4527d8b1b1c0b098 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed, 15 Sep 2010 17:44:16 -0400
Subject: [PATCH 444/728] USB: serial/mos*: prevent reading uninitialized stack
 memory

The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows
unprivileged users to read uninitialized stack memory, because the
"reserved" member of the serial_icounter_struct struct declared on the
stack is not altered or zeroed before being copied back to the user.
This patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/mos7720.c | 3 +++
 drivers/usb/serial/mos7840.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 30922a7e3347..aa665817a272 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2024,6 +2024,9 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 
 	case TIOCGICOUNT:
 		cnow = mos7720_port->icount;
+
+		memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
 		icount.cts = cnow.cts;
 		icount.dsr = cnow.dsr;
 		icount.rng = cnow.rng;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 1c9b6e9b2386..1a42bc213799 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2285,6 +2285,9 @@ static int mos7840_ioctl(struct tty_struct *tty, struct file *file,
 	case TIOCGICOUNT:
 		cnow = mos7840_port->icount;
 		smp_rmb();
+
+		memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
 		icount.cts = cnow.cts;
 		icount.dsr = cnow.dsr;
 		icount.rng = cnow.rng;

From f299470a15ab3057afbf598cec59246a90ade449 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Thu, 9 Sep 2010 09:04:25 +0300
Subject: [PATCH 445/728] USB: musb: MAINTAINERS: Fix my mail address

If we don't, contributors to musb and any USB OMAP
code will be sending mails to an unexistent inbox.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 411b0d04f69b..50b8148448fd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3942,7 +3942,7 @@ F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/usb/usb.git
 S:	Maintained
@@ -4240,7 +4240,7 @@ S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	Felipe Balbi <balbi@ti.com>
 M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org

From 476f771cb9b6cd4845dcd18f16a2f03a89ee63fc Mon Sep 17 00:00:00 2001
From: Mika Westerberg <mika.westerberg@iki.fi>
Date: Sat, 4 Sep 2010 10:23:23 +0300
Subject: [PATCH 446/728] serial: amba-pl010: fix set_ldisc

Commit d87d9b7d1 ("tty: serial - fix tty referencing in set_ldisc") changed
set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver
according the new prototype.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/amba-pl010.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index 50441ffe8e38..2904aa044126 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -472,14 +472,9 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
 	spin_unlock_irqrestore(&uap->port.lock, flags);
 }
 
-static void pl010_set_ldisc(struct uart_port *port)
+static void pl010_set_ldisc(struct uart_port *port, int new)
 {
-	int line = port->line;
-
-	if (line >= port->state->port.tty->driver->num)
-		return;
-
-	if (port->state->port.tty->ldisc->ops->num == N_PPS) {
+	if (new == N_PPS) {
 		port->flags |= UPF_HARDPPS_CD;
 		pl010_enable_ms(port);
 	} else

From e3671ac429fe50cf0c1b4f1dc4b7237207f1d956 Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Mon, 6 Sep 2010 13:41:02 +0100
Subject: [PATCH 447/728] serial: mfd: fix bug in serial_hsu_remove()

Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller),
so in pci remove func, we need handle them differently

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/mfd.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index bc9af503907f..324c385a653d 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -1423,7 +1423,6 @@ static void hsu_global_init(void)
 	}
 
 	phsu = hsu;
-
 	hsu_debugfs_init(hsu);
 	return;
 
@@ -1435,18 +1434,20 @@ err_free_region:
 
 static void serial_hsu_remove(struct pci_dev *pdev)
 {
-	struct hsu_port *hsu;
-	int i;
+	void *priv = pci_get_drvdata(pdev);
+	struct uart_hsu_port *up;
 
-	hsu = pci_get_drvdata(pdev);
-	if (!hsu)
+	if (!priv)
 		return;
 
-	for (i = 0; i < 3; i++)
-		uart_remove_one_port(&serial_hsu_reg, &hsu->port[i].port);
+	/* For port 0/1/2, priv is the address of uart_hsu_port */
+	if (pdev->device != 0x081E) {
+		up = priv;
+		uart_remove_one_port(&serial_hsu_reg, &up->port);
+	}
 
 	pci_set_drvdata(pdev, NULL);
-	free_irq(hsu->irq, hsu);
+	free_irq(pdev->irq, priv);
 	pci_disable_device(pdev);
 }
 

From 350aede603f7db7a9b4c1a340fbe89ccae6523a2 Mon Sep 17 00:00:00 2001
From: Sven Eckelmann <sven.eckelmann@gmx.de>
Date: Sun, 5 Sep 2010 01:58:18 +0200
Subject: [PATCH 448/728] Revert: "Staging: batman-adv: Adding netfilter-bridge
 hooks"

This reverts commit 96d592ed599434d2d5f339a1d282871bc6377d2c.

The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.

It was only added for testing purposes and can be removed again.

Reported-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/batman-adv/hard-interface.c | 13 -------------
 drivers/staging/batman-adv/send.c           |  8 ++------
 2 files changed, 2 insertions(+), 19 deletions(-)

diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c
index baa8b05b9e8d..6e973a79aa25 100644
--- a/drivers/staging/batman-adv/hard-interface.c
+++ b/drivers/staging/batman-adv/hard-interface.c
@@ -30,7 +30,6 @@
 #include "hash.h"
 
 #include <linux/if_arp.h>
-#include <linux/netfilter_bridge.h>
 
 #define MIN(x, y) ((x) < (y) ? (x) : (y))
 
@@ -431,11 +430,6 @@ out:
 	return NOTIFY_DONE;
 }
 
-static int batman_skb_recv_finish(struct sk_buff *skb)
-{
-	return NF_ACCEPT;
-}
-
 /* receive a packet with the batman ethertype coming on a hard
  * interface */
 int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
@@ -456,13 +450,6 @@ int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
 	if (atomic_read(&module_state) != MODULE_ACTIVE)
 		goto err_free;
 
-	/* if netfilter/ebtables wants to block incoming batman
-	 * packets then give them a chance to do so here */
-	ret = NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, dev, NULL,
-		      batman_skb_recv_finish);
-	if (ret != 1)
-		goto err_out;
-
 	/* packet should hold at least type and version */
 	if (unlikely(skb_headlen(skb) < 2))
 		goto err_free;
diff --git a/drivers/staging/batman-adv/send.c b/drivers/staging/batman-adv/send.c
index 055edee7b4e4..da3c82e47bbd 100644
--- a/drivers/staging/batman-adv/send.c
+++ b/drivers/staging/batman-adv/send.c
@@ -29,7 +29,6 @@
 #include "vis.h"
 #include "aggregation.h"
 
-#include <linux/netfilter_bridge.h>
 
 static void send_outstanding_bcast_packet(struct work_struct *work);
 
@@ -92,12 +91,9 @@ int send_skb_packet(struct sk_buff *skb,
 
 	/* dev_queue_xmit() returns a negative result on error.	 However on
 	 * congestion and traffic shaping, it drops and returns NET_XMIT_DROP
-	 * (which is > 0). This will not be treated as an error.
-	 * Also, if netfilter/ebtables wants to block outgoing batman
-	 * packets then giving them a chance to do so here */
+	 * (which is > 0). This will not be treated as an error. */
 
-	return NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
-		       dev_queue_xmit);
+	return dev_queue_xmit(skb);
 send_skb_err:
 	kfree_skb(skb);
 	return NET_XMIT_DROP;

From dd173abfead903c7df54e977535973f3312cd307 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 6 Sep 2010 14:32:30 +0200
Subject: [PATCH 449/728] Staging: vt6655: fix buffer overflow

"param->u.wpa_associate.wpa_ie_len" comes from the user.  We should
check it so that the copy_from_user() doesn't overflow the buffer.

Also further down in the function, we assume that if
"param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is
initialized.  To make that work, I changed the test here to say that if
"wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return
-EINVAL.

Oddly, we only use the first element of the abyWPAIE[] array.  So I
suspect there may be some other issues in this function.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/vt6655/wpactl.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/staging/vt6655/wpactl.c b/drivers/staging/vt6655/wpactl.c
index 0142338bcafe..4bdb8362de82 100644
--- a/drivers/staging/vt6655/wpactl.c
+++ b/drivers/staging/vt6655/wpactl.c
@@ -766,9 +766,14 @@ static int wpa_set_associate(PSDevice pDevice,
     DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "wpa_ie_len = %d\n", param->u.wpa_associate.wpa_ie_len);
 
 
-	if (param->u.wpa_associate.wpa_ie &&
-	    copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len))
-	    return -EINVAL;
+	if (param->u.wpa_associate.wpa_ie_len) {
+		if (!param->u.wpa_associate.wpa_ie)
+			return -EINVAL;
+		if (param->u.wpa_associate.wpa_ie_len > sizeof(abyWPAIE))
+			return -EINVAL;
+		if (copy_from_user(&abyWPAIE[0], param->u.wpa_associate.wpa_ie, param->u.wpa_associate.wpa_ie_len))
+			return -EFAULT;
+	}
 
 	if (param->u.wpa_associate.mode == 1)
 	    pMgmt->eConfigMode = WMAC_CONFIG_IBSS_STA;

From b30a3f6257ed2105259b404d419b4964e363928c Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 20 Sep 2010 16:56:53 -0700
Subject: [PATCH 450/728] Linux 2.6.36-rc5

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 92ab33f16cf0..3133a5772eeb 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

From 6df7aadcd9290807c464675098b5dd2dc9da5075 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Thu, 16 Sep 2010 14:43:08 +0530
Subject: [PATCH 451/728] virtio: console: Fix poll blocking even though there
 is data to read

I found this while working on a Linux agent for spice, the symptom I was
seeing was select blocking on the spice vdagent virtio serial port even
though there were messages queued up there.

virtio_console's port_fops_poll checks port->inbuf != NULL to determine
if read won't block. However if an application reads enough bytes from
inbuf through port_fops_read, to empty the current port->inbuf,
port->inbuf will be NULL even though there may be buffers left in the
virtqueue.

This causes poll() to block even though there is data to be read,
this patch fixes this by using will_read_block(port) instead of the
port->inbuf != NULL check.

Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
---
 drivers/char/virtio_console.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 942a9826bd23..2f2e31b58b34 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -642,7 +642,7 @@ static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
 	poll_wait(filp, &port->waitqueue, wait);
 
 	ret = 0;
-	if (port->inbuf)
+	if (!will_read_block(port))
 		ret |= POLLIN | POLLRDNORM;
 	if (!will_write_block(port))
 		ret |= POLLOUT;

From 65745422a898741ee0e7068ef06624ab06e8aefa Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Tue, 14 Sep 2010 13:26:16 +0530
Subject: [PATCH 452/728] virtio: console: Prevent userspace from submitting
 NULL buffers

A userspace could submit a buffer with 0 length to be written to the
host.  Prevent such a situation.

This was not needed previously, but recent changes in the way write()
works exposed this condition to trigger a virtqueue event to the host,
causing a NULL buffer to be sent across.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: stable@kernel.org
---
 drivers/char/virtio_console.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 2f2e31b58b34..c810481a5bc2 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -596,6 +596,10 @@ static ssize_t port_fops_write(struct file *filp, const char __user *ubuf,
 	ssize_t ret;
 	bool nonblock;
 
+	/* Userspace could be out to fool us */
+	if (!count)
+		return 0;
+
 	port = filp->private_data;
 
 	nonblock = filp->f_flags & O_NONBLOCK;

From 9b6efcd2e2275e13403700913b7a1da92cf11ad2 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 21 Sep 2010 10:54:01 -0600
Subject: [PATCH 453/728] lguest: update comments to reflect
 LHCALL_LOAD_GDT_ENTRY.

We used to have a hypercall which reloaded the entire GDT, then we
switched to one which loaded a single entry (to match the IDT code).

Some comments were not updated, so fix them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported by: Eviatar Khen <eviatarkhen@gmail.com>
---
 arch/x86/lguest/boot.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 9257510b4836..9d5f55848455 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -324,9 +324,8 @@ static void lguest_load_gdt(const struct desc_ptr *desc)
 }
 
 /*
- * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
- * then tell the Host to reload the entire thing.  This operation is so rare
- * that this naive implementation is reasonable.
+ * For a single GDT entry which changes, we simply change our copy and
+ * then tell the host about it.
  */
 static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 				   const void *desc, int type)
@@ -338,9 +337,13 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 }
 
 /*
- * OK, I lied.  There are three "thread local storage" GDT entries which change
+ * There are three "thread local storage" GDT entries which change
  * on every context switch (these three entries are how glibc implements
- * __thread variables).  So we have a hypercall specifically for this case.
+ * __thread variables).  As an optimization, we have a hypercall
+ * specifically for this case.
+ *
+ * Wouldn't it be nicer to have a general LOAD_GDT_ENTRIES hypercall
+ * which took a range of entries?
  */
 static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
 {

From 46b30ea9bc3698bc1d1e6fd726c9601d46fa0a91 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Tue, 21 Sep 2010 07:57:19 +0200
Subject: [PATCH 454/728] percpu: fix pcpu_last_unit_cpu

pcpu_first/last_unit_cpu are used to track which cpu has the first and
last units assigned.  This in turn is used to determine the span of a
chunk for man/unmap cache flushes and whether an address belongs to
the first chunk or not in per_cpu_ptr_to_phys().

When the number of possible CPUs isn't power of two, a chunk may
contain unassigned units towards the end of a chunk.  The logic to
determine pcpu_last_unit_cpu was incorrect when there was an unused
unit at the end of a chunk.  It failed to ignore the unused unit and
assigned the unused marker NR_CPUS to pcpu_last_unit_cpu.

This was discovered through kdump failure which was caused by
malfunctioning per_cpu_ptr_to_phys() on a kvm setup with 50 possible
CPUs by CAI Qian.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc: stable@kernel.org
---
 mm/percpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/percpu.c b/mm/percpu.c
index 58c572b18b07..c76ef3891e0d 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1401,9 +1401,9 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
 
 			if (pcpu_first_unit_cpu == NR_CPUS)
 				pcpu_first_unit_cpu = cpu;
+			pcpu_last_unit_cpu = cpu;
 		}
 	}
-	pcpu_last_unit_cpu = cpu;
 	pcpu_nr_units = unit;
 
 	for_each_possible_cpu(cpu)

From 05c5e7698bdc54b3079a3517d86077f49ebcc788 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 20 Sep 2010 23:24:52 -0700
Subject: [PATCH 455/728] sparc64: Fix race in signal instruction flushing.

If another cpu does a very wide munmap() on the signal frame area,
it can tear down the page table hierarchy from underneath us.

Borrow an idea from the 64-bit fault path's get_user_insn(), and
disable cross call interrupts during the page table traversal
to lock them in place while we operate.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/signal32.c | 102 ++++++++++++++++++++---------------
 1 file changed, 60 insertions(+), 42 deletions(-)

diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index ea22cd373c64..76b67c4c6aa4 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -453,6 +453,64 @@ static int save_fpu_state32(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 	return err;
 }
 
+/* The I-cache flush instruction only works in the primary ASI, which
+ * right now is the nucleus, aka. kernel space.
+ *
+ * Therefore we have to kick the instructions out using the kernel
+ * side linear mapping of the physical address backing the user
+ * instructions.
+ */
+static void flush_signal_insns(unsigned long address)
+{
+	unsigned long pstate, paddr;
+	pte_t *ptep, pte;
+	pgd_t *pgdp;
+	pud_t *pudp;
+	pmd_t *pmdp;
+
+	/* Commit all stores of the instructions we are about to flush.  */
+	wmb();
+
+	/* Disable cross-call reception.  In this way even a very wide
+	 * munmap() on another cpu can't tear down the page table
+	 * hierarchy from underneath us, since that can't complete
+	 * until the IPI tlb flush returns.
+	 */
+
+	__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
+	__asm__ __volatile__("wrpr %0, %1, %%pstate"
+				: : "r" (pstate), "i" (PSTATE_IE));
+
+	pgdp = pgd_offset(current->mm, address);
+	if (pgd_none(*pgdp))
+		goto out_irqs_on;
+	pudp = pud_offset(pgdp, address);
+	if (pud_none(*pudp))
+		goto out_irqs_on;
+	pmdp = pmd_offset(pudp, address);
+	if (pmd_none(*pmdp))
+		goto out_irqs_on;
+
+	ptep = pte_offset_map(pmdp, address);
+	pte = *ptep;
+	if (!pte_present(pte))
+		goto out_unmap;
+
+	paddr = (unsigned long) page_address(pte_page(pte));
+
+	__asm__ __volatile__("flush	%0 + %1"
+			     : /* no outputs */
+			     : "r" (paddr),
+			       "r" (address & (PAGE_SIZE - 1))
+			     : "memory");
+
+out_unmap:
+	pte_unmap(ptep);
+out_irqs_on:
+	__asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate));
+
+}
+
 static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 			  int signo, sigset_t *oldset)
 {
@@ -547,13 +605,7 @@ static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 	if (ka->ka_restorer) {
 		regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
 	} else {
-		/* Flush instruction space. */
 		unsigned long address = ((unsigned long)&(sf->insns[0]));
-		pgd_t *pgdp = pgd_offset(current->mm, address);
-		pud_t *pudp = pud_offset(pgdp, address);
-		pmd_t *pmdp = pmd_offset(pudp, address);
-		pte_t *ptep;
-		pte_t pte;
 
 		regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
 	
@@ -562,22 +614,7 @@ static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 		if (err)
 			goto sigsegv;
 
-		preempt_disable();
-		ptep = pte_offset_map(pmdp, address);
-		pte = *ptep;
-		if (pte_present(pte)) {
-			unsigned long page = (unsigned long)
-				page_address(pte_page(pte));
-
-			wmb();
-			__asm__ __volatile__("flush	%0 + %1"
-					     : /* no outputs */
-					     : "r" (page),
-					       "r" (address & (PAGE_SIZE - 1))
-					     : "memory");
-		}
-		pte_unmap(ptep);
-		preempt_enable();
+		flush_signal_insns(address);
 	}
 	return;
 
@@ -687,12 +724,7 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 	if (ka->ka_restorer)
 		regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
 	else {
-		/* Flush instruction space. */
 		unsigned long address = ((unsigned long)&(sf->insns[0]));
-		pgd_t *pgdp = pgd_offset(current->mm, address);
-		pud_t *pudp = pud_offset(pgdp, address);
-		pmd_t *pmdp = pmd_offset(pudp, address);
-		pte_t *ptep;
 
 		regs->u_regs[UREG_I7] = (unsigned long) (&(sf->insns[0]) - 2);
 	
@@ -704,21 +736,7 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 		if (err)
 			goto sigsegv;
 
-		preempt_disable();
-		ptep = pte_offset_map(pmdp, address);
-		if (pte_present(*ptep)) {
-			unsigned long page = (unsigned long)
-				page_address(pte_page(*ptep));
-
-			wmb();
-			__asm__ __volatile__("flush	%0 + %1"
-					     : /* no outputs */
-					     : "r" (page),
-					       "r" (address & (PAGE_SIZE - 1))
-					     : "memory");
-		}
-		pte_unmap(ptep);
-		preempt_enable();
+		flush_signal_insns(address);
 	}
 	return;
 

From 0f9f1ee9d1412d45a22bfd69dfd4d4324b506e9e Mon Sep 17 00:00:00 2001
From: Luke Yelavich <luke.yelavich@canonical.com>
Date: Tue, 21 Sep 2010 17:05:46 +1000
Subject: [PATCH 456/728] ALSA: hda - Add Dell Latitude E6400 model quirk

BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/643891

Set the Dell Latitude E6400 (1028:0233) SSID to use AD1984_DELL_DESKTOP

Cc: stable@kernel.org
Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_analog.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index b697fd2a6f8b..10bbbaf6ebc3 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3641,6 +3641,7 @@ static struct snd_pci_quirk ad1984_cfg_tbl[] = {
 	/* Lenovo Thinkpad T61/X61 */
 	SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo Thinkpad", AD1984_THINKPAD),
 	SND_PCI_QUIRK(0x1028, 0x0214, "Dell T3400", AD1984_DELL_DESKTOP),
+	SND_PCI_QUIRK(0x1028, 0x0233, "Dell Latitude E6400", AD1984_DELL_DESKTOP),
 	{}
 };
 

From b0722cb1ac84863f57471d2b254457c100319300 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 13 Sep 2010 14:09:33 +0200
Subject: [PATCH 457/728] cciss: freeing uninitialized data on error path

The "h->scatter_list" is allocated inside a for loop.  If any of those
allocations fail, then the rest of the list is uninitialized data.  When
we free it we should start from the top and free backwards so that we
don't call kfree() on uninitialized pointers.

Also if the allocation for "h->scatter_list" fails then we would get an
Oops here.  I should have noticed this when I send: 4ee69851c "cciss:
handle allocation failure."  but I didn't.  Sorry about that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/block/cciss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 6124c2fd2d33..5e4fadcdece9 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -4792,7 +4792,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 clean4:
 	kfree(h->cmd_pool_bits);
 	/* Free up sg elements */
-	for (k = 0; k < h->nr_cmds; k++)
+	for (k-- ; k >= 0; k--)
 		kfree(h->scatter_list[k]);
 	kfree(h->scatter_list);
 	cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);

From a45dc2d2b8d1afa57c91dcfac224e50ffcd3f805 Mon Sep 17 00:00:00 2001
From: Benny Halevy <bhalevy@panasas.com>
Date: Mon, 13 Sep 2010 21:32:19 +0200
Subject: [PATCH 458/728] block: fix blk_rq_map_kern bio direction flag

This bug was introduced in 7b6d91daee5cac6402186ff224c3af39d79f4a0e
"block: unify flags for struct bio and struct request"

Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-map.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/blk-map.c b/block/blk-map.c
index c65d7593f7f1..ade0a08c9099 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -307,7 +307,7 @@ int blk_rq_map_kern(struct request_queue *q, struct request *rq, void *kbuf,
 		return PTR_ERR(bio);
 
 	if (rq_data_dir(rq) == WRITE)
-		bio->bi_rw |= (1 << REQ_WRITE);
+		bio->bi_rw |= REQ_WRITE;
 
 	if (do_copy)
 		rq->cmd_flags |= REQ_COPY_USER;

From 180be2a0420a0d680285e9352c0db85016b9ed2a Mon Sep 17 00:00:00 2001
From: Vivek Goyal <vgoyal@redhat.com>
Date: Tue, 14 Sep 2010 08:47:11 +0200
Subject: [PATCH 459/728] cfq-iosched: fix a kernel OOPs when usb key is
 inserted

Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.

	BUG: unable to handle kernel NULL pointer dereference at 0000002c
	IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
	*pde = 00000000
	Oops: 0000 [#1] PREEMPT
	last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent

	[..]
	Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2                         /Aspire 4315
	EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
	EIP is at cfq_get_queue+0x232/0x412
	EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
	ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
	 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
	Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
	Stack:
	 00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
	<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
	<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
	Call Trace:
	 [<c11c7f10>] ? cfq_set_request+0x228/0x34c
	 [<c11c7ce8>] ? cfq_set_request+0x0/0x34c
	 [<c11bb3b9>] ? elv_set_request+0xf/0x1c
	 [<c11bdd51>] ? get_request+0x1ad/0x22f
	 [<c11bddf2>] ? get_request_wait+0x1f/0x11a
	 [<c11d013b>] ? kvasprintf+0x33/0x3b
	 [<c127b537>] ? scsi_execute+0x1d/0x103
	 [<c127b675>] ? scsi_execute_req+0x58/0x83
	 [<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
	 [<c12718c6>] ? attribute_container_add_device+0x15/0xfa
	 [<c11c95d1>] ? kobject_get+0xf/0x13
	 [<c126d1db>] ? get_device+0x10/0x14
	 [<c127be93>] ? scsi_alloc_target+0x217/0x24d
	 [<c127cbd8>] ? __scsi_scan_target+0x95/0x480
	 [<c10204eb>] ? dequeue_entity+0x14/0x1fe
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c127d00d>] ? scsi_scan_channel+0x4a/0x76
	 [<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d137>] ? do_scsi_scan_host+0x51/0x56
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d14a>] ? do_scan_async+0xe/0x11a
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c10354c5>] ? kthread+0x5e/0x63
	 [<c1035467>] ? kthread+0x0/0x63
	 [<c1002af6>] ? kernel_thread_helper+0x6/0x10
	Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
	EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
	CR2: 000000000000002c
	---[ end trace 9a88306573f69b12 ]---

The problem here is that we don't have bdi->dev information available when
thread does some IO.  Hence when dev_name() tries to access bdi->dev, it
crashes.

This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.

Fix it by delaying the filling of major and minor number information of
device in blk_group.  Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.

Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/cfq-iosched.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index f65c6f01c475..9eba291eb6fd 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -1019,10 +1019,20 @@ cfq_find_alloc_cfqg(struct cfq_data *cfqd, struct cgroup *cgroup, int create)
 	 */
 	atomic_set(&cfqg->ref, 1);
 
-	/* Add group onto cgroup list */
-	sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
-	cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+	/*
+	 * Add group onto cgroup list. It might happen that bdi->dev is
+	 * not initiliazed yet. Initialize this new group without major
+	 * and minor info and this info will be filled in once a new thread
+	 * comes for IO. See code above.
+	 */
+	if (bdi->dev) {
+		sscanf(dev_name(bdi->dev), "%u:%u", &major, &minor);
+		cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
 					MKDEV(major, minor));
+	} else
+		cfq_blkiocg_add_blkio_group(blkcg, &cfqg->blkg, (void *)cfqd,
+					0);
+
 	cfqg->weight = blkcg_get_weight(blkcg, cfqg->blkg.dev);
 
 	/* Add group on cfqd list */

From bb7ab785ad05a97a2c9ffb3a06547ed39f3133e8 Mon Sep 17 00:00:00 2001
From: Jiri Olsa <jolsa@redhat.com>
Date: Tue, 21 Sep 2010 03:26:35 -0400
Subject: [PATCH 460/728] oprofile: Add Support for Intel CPU Family 6 / Model
 29

This patch adds CPU type detection for dunnington processor (Family 6
/ Model 29) to be identified as core 2 family cpu type (wikipedia
source).

I tested oprofile on Intel(R) Xeon(R) CPU E7440 reporting itself as
model 29, and it runs without an issue.

Spec:

 http://www.intel.com/Assets/en_US/PDF/specupdate/320336.pdf

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 009b819f48d0..f1575c9a2572 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -674,6 +674,7 @@ static int __init ppro_init(char **cpu_type)
 	case 0x0f:
 	case 0x16:
 	case 0x17:
+	case 0x1d:
 		*cpu_type = "i386/core_2";
 		break;
 	case 0x1a:

From f6c3f1686e7ec1dd8725a9a3dcb857dfd0c7a5bf Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Mon, 13 Sep 2010 11:02:21 -0700
Subject: [PATCH 461/728] sched: Fix nohz balance kick

There's a situation where the nohz balancer will try to wake itself:

cpu-x is idle which is also ilb_cpu
got a scheduler tick during idle
and the nohz_kick_needed() in trigger_load_balance() checks for
rq_x->nr_running which might not be zero (because of someone waking a
task on this rq etc) and this leads to the situation of the cpu-x
sending a kick to itself.

And this can cause a lockup.

Avoid this by not marking ourself eligible for kicking.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284400941.2684.19.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index a171138a9402..db3f674ca49d 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -3630,7 +3630,7 @@ static inline int nohz_kick_needed(struct rq *rq, int cpu)
 	if (time_before(now, nohz.next_balance))
 		return 0;
 
-	if (!rq->nr_running)
+	if (rq->idle_at_tick)
 		return 0;
 
 	first_pick_cpu = atomic_read(&nohz.first_pick_cpu);

From 83d9f65bdae6f6b34d75282c6618d3f50846849a Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 29 Aug 2010 18:12:24 -0700
Subject: [PATCH 462/728] x86, setup: Fix earlyprintk=serial,ttyS0,115200

Torsten reported that there is garbage output,
after commit 8fee13a48e4879fba57725f6d9513df4bfa8e9f3 (x86,
setup: enable early console output from the decompressor)

It turns out we missed the offset for that case.

Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C7B0578.8090807@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/boot/early_serial_console.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c
index 030f4b93e255..407a8e26f0a7 100644
--- a/arch/x86/boot/early_serial_console.c
+++ b/arch/x86/boot/early_serial_console.c
@@ -58,7 +58,7 @@ static void parse_earlyprintk(void)
 		if (arg[pos] == ',')
 			pos++;
 
-		if (!strncmp(arg, "ttyS", 4)) {
+		if (!strncmp(arg + pos, "ttyS", 4)) {
 			static const int bases[] = { 0x3f8, 0x2f8 };
 			int idx = 0;
 

From 74b3c444a963ba55aef89b33a1bcaada9a4c206f Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sun, 29 Aug 2010 18:13:10 -0700
Subject: [PATCH 463/728] x86, setup: Fix earlyprintk=serial,0x3f8,115200

earlyprintk can take and I/O port, so we need to handle this case in
the setup code too, otherwise 0x3f8 will be treated as a baud rate.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C7B05A6.4010801@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/boot/early_serial_console.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c
index 407a8e26f0a7..5df2869c874b 100644
--- a/arch/x86/boot/early_serial_console.c
+++ b/arch/x86/boot/early_serial_console.c
@@ -58,7 +58,19 @@ static void parse_earlyprintk(void)
 		if (arg[pos] == ',')
 			pos++;
 
-		if (!strncmp(arg + pos, "ttyS", 4)) {
+		/*
+		 * make sure we have
+		 *	"serial,0x3f8,115200"
+		 *	"serial,ttyS0,115200"
+		 *	"ttyS0,115200"
+		 */
+		if (pos == 7 && !strncmp(arg + pos, "0x", 2)) {
+			port = simple_strtoull(arg + pos, &e, 16);
+			if (port == 0 || arg + pos == e)
+				port = DEFAULT_SERIAL_PORT;
+			else
+				pos = e - arg;
+		} else if (!strncmp(arg + pos, "ttyS", 4)) {
 			static const int bases[] = { 0x3f8, 0x2f8 };
 			int idx = 0;
 

From 9eecabcb9a924f1e11ba670365fd4babe423045c Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Tue, 21 Sep 2010 22:28:23 +0100
Subject: [PATCH 464/728] intel-iommu: Abort IOMMU setup for igfx if BIOS gave
 no shadow GTT space

Yet another BIOS bug; Lenovo this time (X201). Red Hat bug #593516.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/pci/intel-iommu.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index c3ceebb5be84..dee88c6cb3ef 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3761,6 +3761,23 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
 
+static void __devinit quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
+{
+	unsigned short ggc;
+
+	if (pci_read_config_word(dev, 0x52, &ggc))
+		return;
+
+	if (!(ggc & 0x800)) {
+		printk(KERN_INFO "DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
+		dmar_map_gfx = 0;
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0040, quirk_calpella_no_shadow_gtt);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0044, quirk_calpella_no_shadow_gtt);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0062, quirk_calpella_no_shadow_gtt);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x006a, quirk_calpella_no_shadow_gtt);
+
 /* On Tylersburg chipsets, some BIOSes have been known to enable the
    ISOCH DMAR unit for the Azalia sound device, but not give it any
    TLB entries, which causes it to deadlock. Check for that.  We do

From eecfd57f6429d9d8e10be186566ef99fced55163 Mon Sep 17 00:00:00 2001
From: Adam Jackson <ajax@redhat.com>
Date: Wed, 25 Aug 2010 21:17:34 +0100
Subject: [PATCH 465/728] intel-iommu: Use symbolic values instead of magic
 numbers in Lenovo w/a

Commit 9eecabcb9a924f1e11ba670365fd4babe423045c ("intel-iommu: Abort
IOMMU setup for igfx if BIOS gave no shadow GTT space") uses a bunch of
magic numbers. Provide #defines for those to make it look slightly saner.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/pci/intel-iommu.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index dee88c6cb3ef..4dfce3dad6ab 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -3761,14 +3761,24 @@ static void __devinit quirk_iommu_rwbf(struct pci_dev *dev)
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
 
+#define GGC 0x52
+#define GGC_MEMORY_SIZE_MASK	(0xf << 8)
+#define GGC_MEMORY_SIZE_NONE	(0x0 << 8)
+#define GGC_MEMORY_SIZE_1M	(0x1 << 8)
+#define GGC_MEMORY_SIZE_2M	(0x3 << 8)
+#define GGC_MEMORY_VT_ENABLED	(0x8 << 8)
+#define GGC_MEMORY_SIZE_2M_VT	(0x9 << 8)
+#define GGC_MEMORY_SIZE_3M_VT	(0xa << 8)
+#define GGC_MEMORY_SIZE_4M_VT	(0xb << 8)
+
 static void __devinit quirk_calpella_no_shadow_gtt(struct pci_dev *dev)
 {
 	unsigned short ggc;
 
-	if (pci_read_config_word(dev, 0x52, &ggc))
+	if (pci_read_config_word(dev, GGC, &ggc))
 		return;
 
-	if (!(ggc & 0x800)) {
+	if (!(ggc & GGC_MEMORY_VT_ENABLED)) {
 		printk(KERN_INFO "DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics\n");
 		dmar_map_gfx = 0;
 	}

From 5c64eb26ed5c5550fbabd345e573af3fc6a7f775 Mon Sep 17 00:00:00 2001
From: Mathias Nyman <mathias.nyman@nokia.com>
Date: Thu, 26 Aug 2010 07:36:44 +0000
Subject: [PATCH 466/728] i2c-omap: Make sure i2c bus is free before setting it
 to idle

If the i2c bus receives an interrupt with both BB (bus busy) and
ARDY (register access ready) statuses set during the tranfer of the last message
the bus was put to idle while still busy.

This caused bus to timeout.

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-omap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 7674efb55378..b33c78586bfc 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -680,6 +680,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	if (r == 0)
 		r = num;
+
+	omap_i2c_wait_for_bb(dev);
 out:
 	omap_i2c_idle(dev);
 	return r;

From 8b15575cae7a93a784c3005c42b069edd9ba64dd Mon Sep 17 00:00:00 2001
From: Sage Weil <sage@newdream.net>
Date: Tue, 21 Sep 2010 14:35:37 -0700
Subject: [PATCH 467/728] fs: {lock,unlock}_flocks() stubs to prepare for BKL
 removal

The lock structs are currently protected by the BKL, but are accessed by
code in fs/locks.c and misc file system and DLM code.  These stubs will
allow all users to switch to the new interface before the implementation
is changed to a spinlock.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/fs.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/include/linux/fs.h b/include/linux/fs.h
index 76041b614758..63d069bd80b7 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1093,6 +1093,10 @@ struct file_lock {
 
 #include <linux/fcntl.h>
 
+/* temporary stubs for BKL removal */
+#define lock_flocks() lock_kernel()
+#define unlock_flocks() unlock_kernel()
+
 extern void send_sigio(struct fown_struct *fown, int fd, int band);
 
 #ifdef CONFIG_FILE_LOCKING

From 5222454cf941b09205d502242dd1e44fd62aa551 Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Wed, 22 Sep 2010 12:31:46 +1000
Subject: [PATCH 468/728] drm/radeon: don't allow device to be opened if
 powered down

If the switcheroo has switched the device off, don't let X open it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_kms.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 5eee3c41d124..8fbbe1c6ebbd 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -203,6 +203,10 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
  */
 int radeon_driver_firstopen_kms(struct drm_device *dev)
 {
+	struct radeon_device *rdev = dev->dev_private;
+
+	if (rdev->powered_down)
+		return -EINVAL;
 	return 0;
 }
 

From 0fbecd400dd0a82d465b3086f209681e8c54cb0f Mon Sep 17 00:00:00 2001
From: Francisco Jerez <currojerez@riseup.net>
Date: Tue, 21 Sep 2010 02:15:15 +0200
Subject: [PATCH 469/728] drm/ttm: Clear the ghost cpu_writers flag on
 ttm_buffer_object_transfer.

It makes sense for a BO to move after a process has requested
exclusive RW access on it (e.g. because the BO used to be located in
unmappable VRAM and we intercepted the CPU access from the fault
handler).

If we let the ghost object inherit cpu_writers from the original
object, ttm_bo_release_list() will raise a kernel BUG when the ghost
object is destroyed. This can be reproduced with the nouveau driver on
nv5x.

Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_bo_util.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 7cffb3e04232..3451a82adba7 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -351,6 +351,7 @@ static int ttm_buffer_object_transfer(struct ttm_buffer_object *bo,
 	INIT_LIST_HEAD(&fbo->lru);
 	INIT_LIST_HEAD(&fbo->swap);
 	fbo->vm_node = NULL;
+	atomic_set(&fbo->cpu_writers, 0);
 
 	fbo->sync_obj = driver->sync_obj_ref(bo->sync_obj);
 	kref_init(&fbo->list_kref);

From 392c21802ee3aa85cee0e703105f797a8a7b9416 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 21 Sep 2010 21:41:12 -0700
Subject: [PATCH 470/728] sparc: Don't mask signal when we can't setup signal
 frame.

Don't invoke the signal handler tracehook in that situation
either.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/signal32.c  | 55 ++++++++++++++++++++++-------------
 arch/sparc/kernel/signal_32.c | 53 ++++++++++++++++++++-------------
 arch/sparc/kernel/signal_64.c | 43 ++++++++++++++++-----------
 3 files changed, 93 insertions(+), 58 deletions(-)

diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 76b67c4c6aa4..643a354795cc 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -511,8 +511,8 @@ out_irqs_on:
 
 }
 
-static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
-			  int signo, sigset_t *oldset)
+static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
+			 int signo, sigset_t *oldset)
 {
 	struct signal_frame32 __user *sf;
 	int sigframe_size;
@@ -620,13 +620,16 @@ static void setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
-			     unsigned long signr, sigset_t *oldset,
-			     siginfo_t *info)
+static int setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
+			    unsigned long signr, sigset_t *oldset,
+			    siginfo_t *info)
 {
 	struct rt_signal_frame32 __user *sf;
 	int sigframe_size;
@@ -738,22 +741,30 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 
 		flush_signal_insns(address);
 	}
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signr, current);
+	return -EFAULT;
 }
 
-static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka,
-				   siginfo_t *info,
-				   sigset_t *oldset, struct pt_regs *regs)
+static inline int handle_signal32(unsigned long signr, struct k_sigaction *ka,
+				  siginfo_t *info,
+				  sigset_t *oldset, struct pt_regs *regs)
 {
+	int err;
+
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame32(ka, regs, signr, oldset, info);
+		err = setup_rt_frame32(ka, regs, signr, oldset, info);
 	else
-		setup_frame32(ka, regs, signr, oldset);
+		err = setup_frame32(ka, regs, signr, oldset);
+
+	if (err)
+		return err;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -761,6 +772,10 @@ static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka,
 		sigaddset(&current->blocked,signr);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(signr, info, ka, regs, 0);
+
+	return 0;
 }
 
 static inline void syscall_restart32(unsigned long orig_i0, struct pt_regs *regs,
@@ -807,16 +822,14 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 	if (signr > 0) {
 		if (restart_syscall)
 			syscall_restart32(orig_i0, regs, &ka.sa);
-		handle_signal32(signr, &ka, &info, oldset, regs);
-
-		/* A signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TS_RESTORE_SIGMASK flag.
-		 */
-		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-
-		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		if (handle_signal32(signr, &ka, &info, oldset, regs) == 0) {
+			/* A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		}
 		return;
 	}
 	if (restart_syscall &&
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 9882df92ba0a..99c85e99bbcf 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -315,8 +315,8 @@ save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 	return err;
 }
 
-static void setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			int signo, sigset_t *oldset)
+static int setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
+		       int signo, sigset_t *oldset)
 {
 	struct signal_frame __user *sf;
 	int sigframe_size, err;
@@ -384,16 +384,19 @@ static void setup_frame(struct k_sigaction *ka, struct pt_regs *regs,
 		/* Flush instruction space. */
 		flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
 	}
-	return;
+	return 0;
 
 sigill_and_return:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static void setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			   int signo, sigset_t *oldset, siginfo_t *info)
+static int setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
+			  int signo, sigset_t *oldset, siginfo_t *info)
 {
 	struct rt_signal_frame __user *sf;
 	int sigframe_size;
@@ -466,22 +469,30 @@ static void setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 		/* Flush instruction space. */
 		flush_sig_insns(current->mm, (unsigned long) &(sf->insns[0]));
 	}
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static inline void
+static inline int
 handle_signal(unsigned long signr, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
+	int err;
+
 	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(ka, regs, signr, oldset, info);
+		err = setup_rt_frame(ka, regs, signr, oldset, info);
 	else
-		setup_frame(ka, regs, signr, oldset);
+		err = setup_frame(ka, regs, signr, oldset);
+
+	if (err)
+		return err;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -489,6 +500,10 @@ handle_signal(unsigned long signr, struct k_sigaction *ka,
 		sigaddset(&current->blocked, signr);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(signr, info, ka, regs, 0);
+
+	return 0;
 }
 
 static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
@@ -546,17 +561,15 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 	if (signr > 0) {
 		if (restart_syscall)
 			syscall_restart(orig_i0, regs, &ka.sa);
-		handle_signal(signr, &ka, &info, oldset, regs);
-
-		/* a signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TIF_RESTORE_SIGMASK flag.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-
-		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+			/* a signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		return;
 	}
 	if (restart_syscall &&
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 9fa48c30037e..3f19e673e2cd 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -409,7 +409,7 @@ static inline void __user *get_sigframe(struct k_sigaction *ka, struct pt_regs *
 	return (void __user *) sp;
 }
 
-static inline void
+static inline int
 setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 	       int signo, sigset_t *oldset, siginfo_t *info)
 {
@@ -483,26 +483,37 @@ setup_rt_frame(struct k_sigaction *ka, struct pt_regs *regs,
 	}
 	/* 4. return to kernel instructions */
 	regs->u_regs[UREG_I7] = (unsigned long)ka->ka_restorer;
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
+	return -EINVAL;
+
 sigsegv:
 	force_sigsegv(signo, current);
+	return -EFAULT;
 }
 
-static inline void handle_signal(unsigned long signr, struct k_sigaction *ka,
-				 siginfo_t *info,
-				 sigset_t *oldset, struct pt_regs *regs)
+static inline int handle_signal(unsigned long signr, struct k_sigaction *ka,
+				siginfo_t *info,
+				sigset_t *oldset, struct pt_regs *regs)
 {
-	setup_rt_frame(ka, regs, signr, oldset,
-		       (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
+	int err;
+
+	err = setup_rt_frame(ka, regs, signr, oldset,
+			     (ka->sa.sa_flags & SA_SIGINFO) ? info : NULL);
+	if (err)
+		return err;
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NOMASK))
 		sigaddset(&current->blocked,signr);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+
+	tracehook_signal_handler(signr, info, ka, regs, 0);
+
+	return 0;
 }
 
 static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
@@ -571,16 +582,14 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 	if (signr > 0) {
 		if (restart_syscall)
 			syscall_restart(orig_i0, regs, &ka.sa);
-		handle_signal(signr, &ka, &info, oldset, regs);
-
-		/* A signal was successfully delivered; the saved
-		 * sigmask will have been stored in the signal frame,
-		 * and will be restored by sigreturn, so we can simply
-		 * clear the TS_RESTORE_SIGMASK flag.
-		 */
-		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
-
-		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0) {
+			/* A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TS_RESTORE_SIGMASK flag.
+			 */
+			current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+		}
 		return;
 	}
 	if (restart_syscall &&

From c27852597829128a9c9d96d79ec454a83c6b0da5 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 21 Sep 2010 22:30:13 -0700
Subject: [PATCH 471/728] sparc: Prevent no-handler signal syscall restart
 recursion.

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/signal32.c  | 4 +++-
 arch/sparc/kernel/signal_32.c | 2 ++
 arch/sparc/kernel/signal_64.c | 2 ++
 3 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 643a354795cc..75fad425e249 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -616,7 +616,7 @@ static int setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 
 		flush_signal_insns(address);
 	}
-	return;
+	return 0;
 
 sigill:
 	do_exit(SIGILL);
@@ -840,12 +840,14 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 		regs->u_regs[UREG_I0] = orig_i0;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 	if (restart_syscall &&
 	    regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
 		regs->u_regs[UREG_G1] = __NR_restart_syscall;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 
 	/* If there's no signal to deliver, we just put the saved sigmask
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 99c85e99bbcf..5e5c5fd03783 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -580,12 +580,14 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 		regs->u_regs[UREG_I0] = orig_i0;
 		regs->pc -= 4;
 		regs->npc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 	if (restart_syscall &&
 	    regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
 		regs->u_regs[UREG_G1] = __NR_restart_syscall;
 		regs->pc -= 4;
 		regs->npc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 
 	/* if there's no signal to deliver, we just put the saved sigmask
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index 3f19e673e2cd..006fe4515886 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -600,12 +600,14 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 		regs->u_regs[UREG_I0] = orig_i0;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 	if (restart_syscall &&
 	    regs->u_regs[UREG_I0] == ERESTART_RESTARTBLOCK) {
 		regs->u_regs[UREG_G1] = __NR_restart_syscall;
 		regs->tpc -= 4;
 		regs->tnpc -= 4;
+		pt_regs_clear_syscall(regs);
 	}
 
 	/* If there's no signal to deliver, we just put the saved sigmask

From 976e48f8a5b02fc33f3e5cad87fb3fcea041a49c Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Tue, 21 Sep 2010 11:48:55 +0200
Subject: [PATCH 472/728] bdi: Initialize noop_backing_dev_info properly

Properly initialize this backing dev info so that writeback code does not
barf when getting to it e.g. via sb->s_bdi.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 mm/backing-dev.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index c2bf86f470ed..65d420499a61 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -30,6 +30,7 @@ EXPORT_SYMBOL_GPL(default_backing_dev_info);
 
 struct backing_dev_info noop_backing_dev_info = {
 	.name		= "noop",
+	.capabilities	= BDI_CAP_NO_ACCT_AND_WRITEBACK,
 };
 EXPORT_SYMBOL_GPL(noop_backing_dev_info);
 
@@ -243,6 +244,7 @@ static int __init default_bdi_init(void)
 	err = bdi_init(&default_backing_dev_info);
 	if (!err)
 		bdi_register(&default_backing_dev_info, NULL, "default");
+	err = bdi_init(&noop_backing_dev_info);
 
 	return err;
 }

From 371d217ee1ff8b418b8f73fb2a34990f951ec2d4 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Tue, 21 Sep 2010 11:49:01 +0200
Subject: [PATCH 473/728] char: Mark /dev/zero and /dev/kmem as not capable of
 writeback

These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 drivers/char/mem.c | 3 ++-
 fs/char_dev.c      | 4 +++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index a398ecdbd758..1f528fad3516 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -788,10 +788,11 @@ static const struct file_operations zero_fops = {
 /*
  * capabilities for /dev/zero
  * - permits private mappings, "copies" are taken of the source of zeros
+ * - no writeback happens
  */
 static struct backing_dev_info zero_bdi = {
 	.name		= "char/mem",
-	.capabilities	= BDI_CAP_MAP_COPY,
+	.capabilities	= BDI_CAP_MAP_COPY | BDI_CAP_NO_ACCT_AND_WRITEBACK,
 };
 
 static const struct file_operations full_fops = {
diff --git a/fs/char_dev.c b/fs/char_dev.c
index f80a4f25123c..143d393881cb 100644
--- a/fs/char_dev.c
+++ b/fs/char_dev.c
@@ -40,7 +40,9 @@ struct backing_dev_info directly_mappable_cdev_bdi = {
 #endif
 		/* permit direct mmap, for read, write or exec */
 		BDI_CAP_MAP_DIRECT |
-		BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP),
+		BDI_CAP_READ_MAP | BDI_CAP_WRITE_MAP | BDI_CAP_EXEC_MAP |
+		/* no writeback happens */
+		BDI_CAP_NO_ACCT_AND_WRITEBACK),
 };
 
 static struct kobj_map *cdev_map;

From 692ebd17c2905313fff3c504c249c6a0faad16ec Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Tue, 21 Sep 2010 11:51:01 +0200
Subject: [PATCH 474/728] bdi: Fix warnings in __mark_inode_dirty for /dev/zero
 and friends

Inodes of devices such as /dev/zero can get dirty for example via
utime(2) syscall or due to atime update. Backing device of such inodes
(zero_bdi, etc.) is however unable to handle dirty inodes and thus
__mark_inode_dirty complains.  In fact, inode should be rather dirtied
against backing device of the filesystem holding it. This is generally a
good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes
in these pseudofilesystems are referenced from ordinary filesystem
inodes and carry mapping with real data of the device. Thus for these
inodes we have to use inode->i_mapping->backing_dev_info as we did so
far. We distinguish these filesystems by checking whether sb->s_bdi
points to a non-trivial backing device or not.

Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /.
There's a device inode A described by a path "/dev/sdb" on this
filesystem. This inode will be dirtied against backing device "8:0"
after this patch. bdev filesystem contains block device inode B coupled
with our inode A. When someone modifies a page of /dev/sdb, it's B that
gets dirtied and the dirtying happens against the backing device "8:16".
Thus both inodes get filed to a correct bdi list.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/fs-writeback.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 81e086d8aa57..5581122bd2c0 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -52,8 +52,6 @@ struct wb_writeback_work {
 #define CREATE_TRACE_POINTS
 #include <trace/events/writeback.h>
 
-#define inode_to_bdi(inode)	((inode)->i_mapping->backing_dev_info)
-
 /*
  * We don't actually have pdflush, but this one is exported though /proc...
  */
@@ -71,6 +69,27 @@ int writeback_in_progress(struct backing_dev_info *bdi)
 	return test_bit(BDI_writeback_running, &bdi->state);
 }
 
+static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
+{
+	struct super_block *sb = inode->i_sb;
+	struct backing_dev_info *bdi = inode->i_mapping->backing_dev_info;
+
+	/*
+	 * For inodes on standard filesystems, we use superblock's bdi. For
+	 * inodes on virtual filesystems, we want to use inode mapping's bdi
+	 * because they can possibly point to something useful (think about
+	 * block_dev filesystem).
+	 */
+	if (sb->s_bdi && sb->s_bdi != &noop_backing_dev_info) {
+		/* Some device inodes could play dirty tricks. Catch them... */
+		WARN(bdi != sb->s_bdi && bdi_cap_writeback_dirty(bdi),
+			"Dirtiable inode bdi %s != sb bdi %s\n",
+			bdi->name, sb->s_bdi->name);
+		return sb->s_bdi;
+	}
+	return bdi;
+}
+
 static void bdi_queue_work(struct backing_dev_info *bdi,
 		struct wb_writeback_work *work)
 {

From 0873a5ae747847ee55a63db409dff3476e45bcd9 Mon Sep 17 00:00:00 2001
From: "Erik J. Staab" <ejs@insightbb.com>
Date: Wed, 22 Sep 2010 11:07:41 +0200
Subject: [PATCH 475/728] ALSA: oxygen: fix analog capture on Claro halo cards

On the HT-Omega Claro halo card, the ADC data must be captured from the
second I2S input.  Using the default first input, which isn't connected
to anything, would result in silence.

Signed-off-by: Erik J. Staab <ejs@insightbb.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/oxygen/oxygen.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 289cb4dacfc7..6c0a11adb2a8 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -543,6 +543,10 @@ static int __devinit get_oxygen_model(struct oxygen *chip,
 		chip->model.suspend = claro_suspend;
 		chip->model.resume = claro_resume;
 		chip->model.set_adc_params = set_ak5385_params;
+		chip->model.device_config = PLAYBACK_0_TO_I2S |
+					    PLAYBACK_1_TO_SPDIF |
+					    CAPTURE_0_FROM_I2S_2 |
+					    CAPTURE_1_FROM_SPDIF;
 		break;
 	}
 	if (id->driver_data == MODEL_MERIDIAN ||

From d47372e852391d0c6553dfbc7c4c56b89b527e13 Mon Sep 17 00:00:00 2001
From: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Date: Tue, 21 Sep 2010 15:03:26 +0100
Subject: [PATCH 476/728] ASoC: Fix soc-cache buffer overflow bug

Make sure we stay within the cache boundaries when updating the
register cache.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/soc-cache.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index adbc68ce9050..15d2779074ef 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -203,8 +203,9 @@ static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
 	data[1] = (value >> 8) & 0xff;
 	data[2] = value & 0xff;
 
-	if (!snd_soc_codec_volatile_register(codec, reg))
-		reg_cache[reg] = value;
+	if (!snd_soc_codec_volatile_register(codec, reg)
+		&& reg < codec->driver->reg_cache_size)
+			reg_cache[reg] = value;
 
 	if (codec->cache_only) {
 		codec->cache_sync = 1;

From 9a81c16b527528ad307843be5571111aa8d35a80 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 20 Sep 2010 21:48:57 +0100
Subject: [PATCH 477/728] powerpc: fix double syscall restarts

Make sigreturn zero regs->trap, make do_signal() do the same on all
paths.  As it is, signal interrupting e.g. read() from fd 512 (==
ERESTARTSYS) with another signal getting unblocked when the first
handler finishes will lead to restart one insn earlier than it ought
to.  Same for multiple signals with in-kernel handlers interrupting
that sucker at the same time.  Same for multiple signals of any kind
interrupting that sucker on 64bit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/signal.c    | 2 ++
 arch/powerpc/kernel/signal_32.c | 3 +--
 arch/powerpc/kernel/signal_64.c | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index 7109f5b1baa8..2300426e531a 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -138,6 +138,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 			ti->local_flags &= ~_TLF_RESTORE_SIGMASK;
 			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 		}
+		regs->trap = 0;
 		return 0;               /* no signals delivered */
 	}
 
@@ -164,6 +165,7 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 		ret = handle_rt_signal64(signr, &ka, &info, oldset, regs);
 	}
 
+	regs->trap = 0;
 	if (ret) {
 		spin_lock_irq(&current->sighand->siglock);
 		sigorsets(&current->blocked, &current->blocked,
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 266610119f66..b96a3a010c26 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -511,6 +511,7 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (!sig)
 		save_r2 = (unsigned int)regs->gpr[2];
 	err = restore_general_regs(regs, sr);
+	regs->trap = 0;
 	err |= __get_user(msr, &sr->mc_gregs[PT_MSR]);
 	if (!sig)
 		regs->gpr[2] = (unsigned long) save_r2;
@@ -884,7 +885,6 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 	regs->nip = (unsigned long) ka->sa.sa_handler;
 	/* enter the signal handler in big-endian mode */
 	regs->msr &= ~MSR_LE;
-	regs->trap = 0;
 	return 1;
 
 badframe:
@@ -1228,7 +1228,6 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
 	regs->nip = (unsigned long) ka->sa.sa_handler;
 	/* enter the signal handler in big-endian mode */
 	regs->msr &= ~MSR_LE;
-	regs->trap = 0;
 
 	return 1;
 
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 2fe6fc64b614..27c4a4584f80 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -178,7 +178,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]);
 	err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]);
 	/* skip SOFTE */
-	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
+	regs->trap = 0;
 	err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
 	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
 	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);

From 0077ca0b5c986477e33451b797b6e7dc92a8bbc0 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 22 Sep 2010 18:47:40 +0100
Subject: [PATCH 478/728] ASoC: Fix multi-componentism

Spot the build testing.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/soc-cache.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index 15d2779074ef..f6b0d2829ea9 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -204,7 +204,7 @@ static int snd_soc_8_16_write(struct snd_soc_codec *codec, unsigned int reg,
 	data[2] = value & 0xff;
 
 	if (!snd_soc_codec_volatile_register(codec, reg)
-		&& reg < codec->driver->reg_cache_size)
+		&& reg < codec->reg_cache_size)
 			reg_cache[reg] = value;
 
 	if (codec->cache_only) {

From 9f9ff20d46c6728b092f34b6a642e1e81ab5e254 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 14 Aug 2010 11:01:45 +0200
Subject: [PATCH 479/728] dma/shdma: move dereference below the NULL check

"param" can be NULL here, so only dereference it after the check.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/shdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index fb64cf36ba61..eb6b54dbb806 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -580,7 +580,6 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg(
 
 	sh_chan = to_sh_chan(chan);
 	param = chan->private;
-	slave_addr = param->config->addr;
 
 	/* Someone calling slave DMA on a public channel? */
 	if (!param || !sg_len) {
@@ -589,6 +588,8 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_slave_sg(
 		return NULL;
 	}
 
+	slave_addr = param->config->addr;
+
 	/*
 	 * if (param != NULL), this is a successfully requested slave channel,
 	 * therefore param->config != NULL too.

From d3f3cf859db17cc5f8156c5bfcd032413e44483b Mon Sep 17 00:00:00 2001
From: Mathieu Lacage <mathieu.lacage@sophia.inria.fr>
Date: Sat, 14 Aug 2010 15:02:44 +0200
Subject: [PATCH 480/728] missing inline keyword for static function in
 linux/dmaengine.h

Add a missing inline keyword for static function in linux/dmaengine.h to
avoid duplicate symbol definitions.

Signed-off-by: Mathieu Lacage <mathieu.lacage@sophia.inria.fr>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 include/linux/dmaengine.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c61d4ca27bcc..e2106495cc11 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -548,7 +548,7 @@ static inline bool dma_dev_has_pq_continue(struct dma_device *dma)
 	return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
 }
 
-static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+static inline unsigned short dma_dev_to_maxpq(struct dma_device *dma)
 {
 	return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
 }

From 767b68e96993e29e3480d7ecdd9c4b84667c5762 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed, 22 Sep 2010 14:32:56 -0400
Subject: [PATCH 481/728] Prevent freeing uninitialized pointer in
 compat_do_readv_writev

In 32-bit compatibility mode, the error handling for
compat_do_readv_writev() may free an uninitialized pointer, potentially
leading to all sorts of ugly memory corruption.  This is reliably
triggerable by unprivileged users by invoking the readv()/writev()
syscalls with an invalid iovec pointer.  The below patch fixes this to
emulate the non-compat version.

Introduced by commit b83733639a49 ("compat: factor out
compat_rw_copy_check_uvector from compat_do_readv_writev")

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable@kernel.org (2.6.35)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/compat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/compat.c b/fs/compat.c
index 718c7062aec1..0644a154672b 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1153,7 +1153,7 @@ static ssize_t compat_do_readv_writev(int type, struct file *file,
 {
 	compat_ssize_t tot_len;
 	struct iovec iovstack[UIO_FASTIOV];
-	struct iovec *iov;
+	struct iovec *iov = iovstack;
 	ssize_t ret;
 	io_fn_t fn;
 	iov_fn_t fnv;

From f19e8aa11afa24036c6273428da51949b5acf30c Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Wed, 22 Sep 2010 13:04:52 -0700
Subject: [PATCH 482/728] oom: always return a badness score of non-zero for
 eligible tasks

A task's badness score is roughly a proportion of its rss and swap
compared to the system's capacity.  The scale ranges from 0 to 1000 with
the highest score chosen for kill.  Thus, this scale operates on a
resolution of 0.1% of RAM + swap.  Admin tasks are also given a 3% bonus,
so the badness score of an admin task using 3% of memory, for example,
would still be 0.

It's possible that an exceptionally large number of tasks will combine to
exhaust all resources but never have a single task that uses more than
0.1% of RAM and swap (or 3.0% for admin tasks).

This patch ensures that the badness score of any eligible task is never 0
so the machine doesn't unnecessarily panic because it cannot find a task
to kill.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/oom_kill.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index fc81cb22869e..859250c7dc06 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -208,8 +208,13 @@ unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem,
 	 */
 	points += p->signal->oom_score_adj;
 
-	if (points < 0)
-		return 0;
+	/*
+	 * Never return 0 for an eligible task that may be killed since it's
+	 * possible that no single user task uses more than 0.1% of memory and
+	 * no single admin tasks uses more than 3.0%.
+	 */
+	if (points <= 0)
+		return 1;
 	return (points < 1000) ? points : 1000;
 }
 

From a9e31765e7d528858e1b0c202b823cf4df7577ca Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 22 Sep 2010 13:04:53 -0700
Subject: [PATCH 483/728] ipmi: fix acpi probe print

After d9e1b6c45059ccf ("ipmi: fix ACPI detection with regspacing") we get

[   11.026326] ipmi_si: probing via ACPI
[   11.030019] ipmi_si 00:09: (null) regsize 1 spacing 1 irq 0
[   11.035594] ipmi_si: Adding ACPI-specified kcs state machine

on an old system with only one range for ipmi kcs range.

Try to fix it by adding another res pointer.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 3822b4f49c84..2be457a0c0c3 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2126,7 +2126,7 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
 {
 	struct acpi_device *acpi_dev;
 	struct smi_info *info;
-	struct resource *res;
+	struct resource *res, *res_second;
 	acpi_handle handle;
 	acpi_status status;
 	unsigned long long tmp;
@@ -2182,13 +2182,13 @@ static int __devinit ipmi_pnp_probe(struct pnp_dev *dev,
 	info->io.addr_data = res->start;
 
 	info->io.regspacing = DEFAULT_REGSPACING;
-	res = pnp_get_resource(dev,
+	res_second = pnp_get_resource(dev,
 			       (info->io.addr_type == IPMI_IO_ADDR_SPACE) ?
 					IORESOURCE_IO : IORESOURCE_MEM,
 			       1);
-	if (res) {
-		if (res->start > info->io.addr_data)
-			info->io.regspacing = res->start - info->io.addr_data;
+	if (res_second) {
+		if (res_second->start > info->io.addr_data)
+			info->io.regspacing = res_second->start - info->io.addr_data;
 	}
 	info->io.regsize = DEFAULT_REGSPACING;
 	info->io.regshift = 0;

From c227e69028473c7c7994a9b0a2cc0034f3f7e0fe Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 22 Sep 2010 13:04:54 -0700
Subject: [PATCH 484/728] /proc/vmcore: fix seeking

Commit 73296bc611 ("procfs: Use generic_file_llseek in /proc/vmcore")
broke seeking on /proc/vmcore.  This changes it back to use default_llseek
in order to restore the original behaviour.

The problem with generic_file_llseek is that it only allows seeks up to
inode->i_sb->s_maxbytes, which is zero on procfs and some other virtual
file systems.  We should merge generic_file_llseek and default_llseek some
day and clean this up in a proper way, but for 2.6.35/36, reverting vmcore
is the safer solution.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: CAI Qian <caiqian@redhat.com>
Tested-by: CAI Qian <caiqian@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/vmcore.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 91c817ff02c3..2367fb3f70bc 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -163,7 +163,7 @@ static ssize_t read_vmcore(struct file *file, char __user *buffer,
 
 static const struct file_operations proc_vmcore_operations = {
 	.read		= read_vmcore,
-	.llseek		= generic_file_llseek,
+	.llseek		= default_llseek,
 };
 
 static struct vmcore* __init get_new_element(void)

From 710224fa2750cf449c02dd115548acebfdd2c86a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Wed, 22 Sep 2010 13:04:55 -0700
Subject: [PATCH 485/728] arm: fix "arm: fix pci_set_consistent_dma_mask for
 dmabounce devices"

This fixes the regression caused by the commit 6fee48cd330c68
("dma-mapping: arm: use generic pci_set_dma_mask and
pci_set_consistent_dma_mask").

ARM needs to clip the dma coherent mask for dmabounce devices. This
restores the old trick.

Note that strictly speaking, the DMA API doesn't allow architectures to do
such but I'm not sure it's worth adding the new API to set the dma mask
that allows architectures to clip it.

Reported-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/common/it8152.c                     | 8 ++++++++
 arch/arm/mach-ixp4xx/common-pci.c            | 8 ++++++++
 arch/arm/mach-ixp4xx/include/mach/hardware.h | 2 ++
 arch/arm/mach-pxa/include/mach/hardware.h    | 2 +-
 arch/arm/mach-pxa/include/mach/io.h          | 2 ++
 include/linux/dma-mapping.h                  | 4 ++++
 6 files changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 7974baacafce..1bec96e85196 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -271,6 +271,14 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= PHYS_OFFSET + SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	it8152_io.start = IT8152_IO_BASE + 0x12000;
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 61cd4d64b985..24498a932ba6 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -503,6 +503,14 @@ struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }
 
+int dma_set_coherent_mask(struct device *dev, u64 mask)
+{
+	if (mask >= SZ_64M - 1)
+		return 0;
+
+	return -EIO;
+}
+
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f91ca6d4fbe8..8138371c406e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #define PCIBIOS_MAX_MEM		0x4BFFFFFF
 #endif
 
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
+
 #define pcibios_assign_all_busses()	1
 
 /* Register locations and bits */
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 7f64d24cd564..428cc7bda9a4 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -309,7 +309,7 @@ extern unsigned long get_clock_tick_rate(void);
 #define PCIBIOS_MIN_IO		0
 #define PCIBIOS_MIN_MEM		0
 #define pcibios_assign_all_busses()	1
+#define ARCH_HAS_DMA_SET_COHERENT_MASK
 #endif
 
-
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
index 262691fb97d8..fdca3be47d9b 100644
--- a/arch/arm/mach-pxa/include/mach/io.h
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <mach/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index ce29b8151198..ba8319ae5fcc 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -102,6 +102,9 @@ static inline u64 dma_get_mask(struct device *dev)
 	return DMA_BIT_MASK(32);
 }
 
+#ifdef ARCH_HAS_DMA_SET_COHERENT_MASK
+int dma_set_coherent_mask(struct device *dev, u64 mask);
+#else
 static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
 {
 	if (!dma_supported(dev, mask))
@@ -109,6 +112,7 @@ static inline int dma_set_coherent_mask(struct device *dev, u64 mask)
 	dev->coherent_dma_mask = mask;
 	return 0;
 }
+#endif
 
 extern u64 dma_get_required_mask(struct device *dev);
 

From d544b7a40ad3423676b8876aad64fc5f87296b2d Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dtor@vmware.com>
Date: Wed, 22 Sep 2010 13:04:57 -0700
Subject: [PATCH 486/728] vmware balloon: rename module

In an effort to minimize customer confusion we want to unify naming
convention for VMware-provided kernel modules.  This change renames the
balloon driver from vmware_ballon to vmw_balloon.

We expect to follow this naming convention (vmw_<module_name>) for all
modules that are part of mainline kernel and/or being distributed by
VMware, with the sole exception of vmxnet3 driver (since the name of
mainline driver happens to match with the name used in VMware Tools).

Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Acked-by: Bhavesh Davda <bhavesh@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/Kconfig                             | 2 +-
 drivers/misc/Makefile                            | 2 +-
 drivers/misc/{vmware_balloon.c => vmw_balloon.c} | 0
 3 files changed, 2 insertions(+), 2 deletions(-)
 rename drivers/misc/{vmware_balloon.c => vmw_balloon.c} (100%)

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 0b591b658243..b74331260744 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -368,7 +368,7 @@ config VMWARE_BALLOON
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called vmware_balloon.
+	  module will be called vmw_balloon.
 
 config ARM_CHARLCD
 	bool "ARM Ltd. Character LCD Driver"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 255a80dc9d73..42eab95cde2a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -33,5 +33,5 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-$(CONFIG_HMC6352)		+= hmc6352.o
 obj-y				+= eeprom/
 obj-y				+= cb710/
-obj-$(CONFIG_VMWARE_BALLOON)	+= vmware_balloon.o
+obj-$(CONFIG_VMWARE_BALLOON)	+= vmw_balloon.o
 obj-$(CONFIG_ARM_CHARLCD)	+= arm-charlcd.o
diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmw_balloon.c
similarity index 100%
rename from drivers/misc/vmware_balloon.c
rename to drivers/misc/vmw_balloon.c

From f5665518c20c01e9045314872878f5788cb3fff2 Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Date: Wed, 22 Sep 2010 13:04:58 -0700
Subject: [PATCH 487/728] MAINTAINERS: change AVR32 and AT32AP maintainer

Alter the maintainer of the AVR32 architecture and the AVR32/AT32AP
machine support to me.  Haavard is moving on to new challenges, and we've
found it better to transfer the maintainer part to me.  I will have good
contact with Haavard anyway.

Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 50b8148448fd..726433a17998 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1220,7 +1220,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1228,7 +1228,7 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
+M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 

From eba93fcc34d6c4387ce8fbb53bb7b685f91f3343 Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Wed, 22 Sep 2010 13:04:59 -0700
Subject: [PATCH 488/728] drivers/rtc/rtc-ab3100.c: add missing
 platform_set_drvdata() in ab3100_rtc_probe()

Otherwise, calling platform_get_drvdata() in ab3100_rtc_remove() returns
NULL.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by:Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-ab3100.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/rtc/rtc-ab3100.c b/drivers/rtc/rtc-ab3100.c
index d26780ea254b..261a07e0fb24 100644
--- a/drivers/rtc/rtc-ab3100.c
+++ b/drivers/rtc/rtc-ab3100.c
@@ -235,6 +235,7 @@ static int __init ab3100_rtc_probe(struct platform_device *pdev)
 		err = PTR_ERR(rtc);
 		return err;
 	}
+	platform_set_drvdata(pdev, rtc);
 
 	return 0;
 }
@@ -244,6 +245,7 @@ static int __exit ab3100_rtc_remove(struct platform_device *pdev)
 	struct rtc_device *rtc = platform_get_drvdata(pdev);
 
 	rtc_device_unregister(rtc);
+	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 

From d1908362ae0b97374eb8328fbb471576332f9fb1 Mon Sep 17 00:00:00 2001
From: Minchan Kim <minchan.kim@gmail.com>
Date: Wed, 22 Sep 2010 13:05:01 -0700
Subject: [PATCH 489/728] vmscan: check all_unreclaimable in direct reclaim
 path

M.  Vefa Bicakci reported 2.6.35 kernel hang up when hibernation on his
32bit 3GB mem machine.
(https://bugzilla.kernel.org/show_bug.cgi?id=16771). Also he bisected
the regression to

  commit bb21c7ce18eff8e6e7877ca1d06c6db719376e3c
  Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
  Date:   Fri Jun 4 14:15:05 2010 -0700

     vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure

At first impression, this seemed very strange because the above commit
only chenged function return value and hibernate_preallocate_memory()
ignore return value of shrink_all_memory().  But it's related.

Now, page allocation from hibernation code may enter infinite loop if the
system has highmem.  The reasons are that vmscan don't care enough OOM
case when oom_killer_disabled.

The problem sequence is following as.

1. hibernation
2. oom_disable
3. alloc_pages
4. do_try_to_free_pages
       if (scanning_global_lru(sc) && !all_unreclaimable)
               return 1;

If kswapd is not freozen, it would set zone->all_unreclaimable to 1 and
then shrink_zones maybe return true(ie, all_unreclaimable is true).  So at
last, alloc_pages could go to _nopage_.  If it is, it should have no
problem.

This patch adds all_unreclaimable check to protect in direct reclaim path,
too.  It can care of hibernation OOM case and help bailout
all_unreclaimable case slightly.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Reported-by: M. Vefa Bicakci <bicave@superonline.com>
Reported-by: <caiqian@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: <caiqian@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmscan.c | 43 +++++++++++++++++++++++++++++++++++--------
 1 file changed, 35 insertions(+), 8 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index c391c320dbaf..c5dfabf25f11 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1804,12 +1804,11 @@ static void shrink_zone(int priority, struct zone *zone,
  * If a zone is deemed to be full of pinned pages then just give it a light
  * scan then give up on it.
  */
-static bool shrink_zones(int priority, struct zonelist *zonelist,
+static void shrink_zones(int priority, struct zonelist *zonelist,
 					struct scan_control *sc)
 {
 	struct zoneref *z;
 	struct zone *zone;
-	bool all_unreclaimable = true;
 
 	for_each_zone_zonelist_nodemask(zone, z, zonelist,
 					gfp_zone(sc->gfp_mask), sc->nodemask) {
@@ -1827,8 +1826,38 @@ static bool shrink_zones(int priority, struct zonelist *zonelist,
 		}
 
 		shrink_zone(priority, zone, sc);
-		all_unreclaimable = false;
 	}
+}
+
+static bool zone_reclaimable(struct zone *zone)
+{
+	return zone->pages_scanned < zone_reclaimable_pages(zone) * 6;
+}
+
+/*
+ * As hibernation is going on, kswapd is freezed so that it can't mark
+ * the zone into all_unreclaimable. It can't handle OOM during hibernation.
+ * So let's check zone's unreclaimable in direct reclaim as well as kswapd.
+ */
+static bool all_unreclaimable(struct zonelist *zonelist,
+		struct scan_control *sc)
+{
+	struct zoneref *z;
+	struct zone *zone;
+	bool all_unreclaimable = true;
+
+	for_each_zone_zonelist_nodemask(zone, z, zonelist,
+			gfp_zone(sc->gfp_mask), sc->nodemask) {
+		if (!populated_zone(zone))
+			continue;
+		if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL))
+			continue;
+		if (zone_reclaimable(zone)) {
+			all_unreclaimable = false;
+			break;
+		}
+	}
+
 	return all_unreclaimable;
 }
 
@@ -1852,7 +1881,6 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 					struct scan_control *sc)
 {
 	int priority;
-	bool all_unreclaimable;
 	unsigned long total_scanned = 0;
 	struct reclaim_state *reclaim_state = current->reclaim_state;
 	struct zoneref *z;
@@ -1869,7 +1897,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist,
 		sc->nr_scanned = 0;
 		if (!priority)
 			disable_swap_token();
-		all_unreclaimable = shrink_zones(priority, zonelist, sc);
+		shrink_zones(priority, zonelist, sc);
 		/*
 		 * Don't shrink slabs when reclaiming memory from
 		 * over limit cgroups
@@ -1931,7 +1959,7 @@ out:
 		return sc->nr_reclaimed;
 
 	/* top priority shrink_zones still had more to do? don't OOM, then */
-	if (scanning_global_lru(sc) && !all_unreclaimable)
+	if (scanning_global_lru(sc) && !all_unreclaimable(zonelist, sc))
 		return 1;
 
 	return 0;
@@ -2197,8 +2225,7 @@ loop_again:
 			total_scanned += sc.nr_scanned;
 			if (zone->all_unreclaimable)
 				continue;
-			if (nr_slab == 0 &&
-			    zone->pages_scanned >= (zone_reclaimable_pages(zone) * 6))
+			if (nr_slab == 0 && !zone_reclaimable(zone))
 				zone->all_unreclaimable = 1;
 			/*
 			 * If we've done a decent amount of scanning and

From a0c42bac79731276c9b2f28d54f9e658fcf843a2 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Wed, 22 Sep 2010 13:05:03 -0700
Subject: [PATCH 490/728] aio: do not return ERESTARTSYS as a result of AIO

OCFS2 can return ERESTARTSYS from its write function when the process is
signalled while waiting for a cluster lock (and the filesystem is mounted
with intr mount option).  Generally, it seems reasonable to allow
filesystems to return this error code from its IO functions.  As we must
not leak ERESTARTSYS (and similar error codes) to userspace as a result of
an AIO operation, we have to properly convert it to EINTR inside AIO code
(restarting the syscall isn't really an option because other AIO could
have been already submitted by the same io_submit syscall).

Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/aio.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/aio.c b/fs/aio.c
index 1320b2a05fb2..250b0a73c8a8 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -712,8 +712,16 @@ static ssize_t aio_run_iocb(struct kiocb *iocb)
 	 */
 	ret = retry(iocb);
 
-	if (ret != -EIOCBRETRY && ret != -EIOCBQUEUED)
+	if (ret != -EIOCBRETRY && ret != -EIOCBQUEUED) {
+		/*
+		 * There's no easy way to restart the syscall since other AIO's
+		 * may be already running. Just fail this IO with EINTR.
+		 */
+		if (unlikely(ret == -ERESTARTSYS || ret == -ERESTARTNOINTR ||
+			     ret == -ERESTARTNOHAND || ret == -ERESTART_RESTARTBLOCK))
+			ret = -EINTR;
 		aio_complete(iocb, ret, 0);
+	}
 out:
 	spin_lock_irq(&ctx->ctx_lock);
 

From 85a00d9bbfb4704fbf368944b1cb9fed8f1598c5 Mon Sep 17 00:00:00 2001
From: Peter Jones <pjones@redhat.com>
Date: Wed, 22 Sep 2010 13:05:04 -0700
Subject: [PATCH 491/728] efifb: check that the base address is plausible on
 pci systems

Some Apple machines have identical DMI data but different memory
configurations for the video.  Given that, check that the address in our
table is actually within the range of a PCI BAR on a VGA device in the
machine.

This also fixes up the return value from set_system(), which has always
been wrong, but never resulted in bad behavior since there's only ever
been one matching entry in the dmi table.

The patch

1) stops people's machines from crashing when we get their display wrong,
   which seems to be unfortunately inevitable,

2) allows us to support identical dmi data with differing video memory
   configurations

This also adds me as the efifb maintainer, since I've effectively been
acting as such for quite some time.

Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS           |  6 +++++
 drivers/video/efifb.c | 61 ++++++++++++++++++++++++++++++++++---------
 2 files changed, 55 insertions(+), 12 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 726433a17998..4d4881d909da 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2199,6 +2199,12 @@ W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/eeepc-laptop.c
 
+EFIFB FRAMEBUFFER DRIVER
+L:	linux-fbdev@vger.kernel.org
+M:	Peter Jones <pjones@redhat.com>
+S:	Maintained
+F:	drivers/video/efifb.c
+
 EFS FILESYSTEM
 W:	http://aeschi.ch.eu.org/efs/
 S:	Orphan
diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index 815f84b07933..c082b616f390 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/screen_info.h>
 #include <linux/dmi.h>
-
+#include <linux/pci.h>
 #include <video/vga.h>
 
 static struct fb_var_screeninfo efifb_defined __devinitdata = {
@@ -116,7 +116,7 @@ static int set_system(const struct dmi_system_id *id)
 {
 	struct efifb_dmi_info *info = id->driver_data;
 	if (info->base == 0)
-		return -ENODEV;
+		return 0;
 
 	printk(KERN_INFO "efifb: dmi detected %s - framebuffer at %p "
 			 "(%dx%d, stride %d)\n", id->ident,
@@ -124,18 +124,55 @@ static int set_system(const struct dmi_system_id *id)
 			 info->stride);
 
 	/* Trust the bootloader over the DMI tables */
-	if (screen_info.lfb_base == 0)
+	if (screen_info.lfb_base == 0) {
+#if defined(CONFIG_PCI)
+		struct pci_dev *dev = NULL;
+		int found_bar = 0;
+#endif
 		screen_info.lfb_base = info->base;
-	if (screen_info.lfb_linelength == 0)
-		screen_info.lfb_linelength = info->stride;
-	if (screen_info.lfb_width == 0)
-		screen_info.lfb_width = info->width;
-	if (screen_info.lfb_height == 0)
-		screen_info.lfb_height = info->height;
-	if (screen_info.orig_video_isVGA == 0)
-		screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
 
-	return 0;
+#if defined(CONFIG_PCI)
+		/* make sure that the address in the table is actually on a
+		 * VGA device's PCI BAR */
+
+		for_each_pci_dev(dev) {
+			int i;
+			if ((dev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
+				continue;
+			for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+				resource_size_t start, end;
+
+				start = pci_resource_start(dev, i);
+				if (start == 0)
+					break;
+				end = pci_resource_end(dev, i);
+				if (screen_info.lfb_base >= start &&
+						screen_info.lfb_base < end) {
+					found_bar = 1;
+				}
+			}
+		}
+		if (!found_bar)
+			screen_info.lfb_base = 0;
+#endif
+	}
+	if (screen_info.lfb_base) {
+		if (screen_info.lfb_linelength == 0)
+			screen_info.lfb_linelength = info->stride;
+		if (screen_info.lfb_width == 0)
+			screen_info.lfb_width = info->width;
+		if (screen_info.lfb_height == 0)
+			screen_info.lfb_height = info->height;
+		if (screen_info.orig_video_isVGA == 0)
+			screen_info.orig_video_isVGA = VIDEO_TYPE_EFI;
+	} else {
+		screen_info.lfb_linelength = 0;
+		screen_info.lfb_width = 0;
+		screen_info.lfb_height = 0;
+		screen_info.orig_video_isVGA = 0;
+		return 0;
+	}
+	return 1;
 }
 
 static int efifb_setcolreg(unsigned regno, unsigned red, unsigned green,

From a5757c2a474a15f87e5baa9a4caacc31cde2bae6 Mon Sep 17 00:00:00 2001
From: Luke Macken <lmacken@redhat.com>
Date: Wed, 22 Sep 2010 13:05:04 -0700
Subject: [PATCH 492/728] efifb: support the EFI framebuffer on more Apple
 hardware

Enable the EFI framebuffer on 14 more Macs, including the iMac11,1
iMac10,1 iMac8,1 Macmini3,1 Macmini4,1 MacBook5,1 MacBook6,1 MacBook7,1
MacBookPro2,2 MacBookPro5,2 MacBookPro5,3 MacBookPro6,1 MacBookPro6,2 and
MacBookPro7,1

Information gathered from various user submissions.

    https://bugzilla.redhat.com/show_bug.cgi?id=528232
    http://ubuntuforums.org/showthread.php?t=1557326

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Luke Macken <lmacken@redhat.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/efifb.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/drivers/video/efifb.c b/drivers/video/efifb.c
index c082b616f390..70477c2e4b61 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/efifb.c
@@ -39,17 +39,31 @@ enum {
 	M_I20,		/* 20-Inch iMac */
 	M_I20_SR,	/* 20-Inch iMac (Santa Rosa) */
 	M_I24,		/* 24-Inch iMac */
+	M_I24_8_1,	/* 24-Inch iMac, 8,1th gen */
+	M_I24_10_1,	/* 24-Inch iMac, 10,1th gen */
+	M_I27_11_1,	/* 27-Inch iMac, 11,1th gen */
 	M_MINI,		/* Mac Mini */
+	M_MINI_3_1,	/* Mac Mini, 3,1th gen */
+	M_MINI_4_1,	/* Mac Mini, 4,1th gen */
 	M_MB,		/* MacBook */
 	M_MB_2,		/* MacBook, 2nd rev. */
 	M_MB_3,		/* MacBook, 3rd rev. */
+	M_MB_5_1,	/* MacBook, 5th rev. */
+	M_MB_6_1,	/* MacBook, 6th rev. */
+	M_MB_7_1,	/* MacBook, 7th rev. */
 	M_MB_SR,	/* MacBook, 2nd gen, (Santa Rosa) */
 	M_MBA,		/* MacBook Air */
 	M_MBP,		/* MacBook Pro */
 	M_MBP_2,	/* MacBook Pro 2nd gen */
+	M_MBP_2_2,	/* MacBook Pro 2,2nd gen */
 	M_MBP_SR,	/* MacBook Pro (Santa Rosa) */
 	M_MBP_4,	/* MacBook Pro, 4th gen */
 	M_MBP_5_1,    /* MacBook Pro, 5,1th gen */
+	M_MBP_5_2,	/* MacBook Pro, 5,2th gen */
+	M_MBP_5_3,	/* MacBook Pro, 5,3rd gen */
+	M_MBP_6_1,	/* MacBook Pro, 6,1th gen */
+	M_MBP_6_2,	/* MacBook Pro, 6,2th gen */
+	M_MBP_7_1,	/* MacBook Pro, 7,1th gen */
 	M_UNKNOWN	/* placeholder */
 };
 
@@ -64,14 +78,28 @@ static struct efifb_dmi_info {
 	[M_I20] = { "i20", 0x80010000, 1728 * 4, 1680, 1050 }, /* guess */
 	[M_I20_SR] = { "imac7", 0x40010000, 1728 * 4, 1680, 1050 },
 	[M_I24] = { "i24", 0x80010000, 2048 * 4, 1920, 1200 }, /* guess */
+	[M_I24_8_1] = { "imac8", 0xc0060000, 2048 * 4, 1920, 1200 },
+	[M_I24_10_1] = { "imac10", 0xc0010000, 2048 * 4, 1920, 1080 },
+	[M_I27_11_1] = { "imac11", 0xc0010000, 2560 * 4, 2560, 1440 },
 	[M_MINI]= { "mini", 0x80000000, 2048 * 4, 1024, 768 },
+	[M_MINI_3_1] = { "mini31", 0x40010000, 1024 * 4, 1024, 768 },
+	[M_MINI_4_1] = { "mini41", 0xc0010000, 2048 * 4, 1920, 1200 },
 	[M_MB] = { "macbook", 0x80000000, 2048 * 4, 1280, 800 },
+	[M_MB_5_1] = { "macbook51", 0x80010000, 2048 * 4, 1280, 800 },
+	[M_MB_6_1] = { "macbook61", 0x80010000, 2048 * 4, 1280, 800 },
+	[M_MB_7_1] = { "macbook71", 0x80010000, 2048 * 4, 1280, 800 },
 	[M_MBA] = { "mba", 0x80000000, 2048 * 4, 1280, 800 },
 	[M_MBP] = { "mbp", 0x80010000, 1472 * 4, 1440, 900 },
 	[M_MBP_2] = { "mbp2", 0, 0, 0, 0 }, /* placeholder */
+	[M_MBP_2_2] = { "mbp22", 0x80010000, 1472 * 4, 1440, 900 },
 	[M_MBP_SR] = { "mbp3", 0x80030000, 2048 * 4, 1440, 900 },
 	[M_MBP_4] = { "mbp4", 0xc0060000, 2048 * 4, 1920, 1200 },
 	[M_MBP_5_1] = { "mbp51", 0xc0010000, 2048 * 4, 1440, 900 },
+	[M_MBP_5_2] = { "mbp52", 0xc0010000, 2048 * 4, 1920, 1200 },
+	[M_MBP_5_3] = { "mbp53", 0xd0010000, 2048 * 4, 1440, 900 },
+	[M_MBP_6_1] = { "mbp61", 0x90030000, 2048 * 4, 1920, 1200 },
+	[M_MBP_6_2] = { "mbp62", 0x90030000, 2048 * 4, 1680, 1050 },
+	[M_MBP_7_1] = { "mbp71", 0xc0010000, 2048 * 4, 1280, 800 },
 	[M_UNKNOWN] = { NULL, 0, 0, 0, 0 }
 };
 
@@ -92,7 +120,12 @@ static const struct dmi_system_id dmi_system_table[] __initconst = {
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "iMac6,1", M_I24),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac6,1", M_I24),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac7,1", M_I20_SR),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac8,1", M_I24_8_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac10,1", M_I24_10_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "iMac11,1", M_I27_11_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "Macmini1,1", M_MINI),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini3,1", M_MINI_3_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "Macmini4,1", M_MINI_4_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook1,1", M_MB),
 	/* At least one of these two will be right; maybe both? */
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook2,1", M_MB),
@@ -101,14 +134,23 @@ static const struct dmi_system_id dmi_system_table[] __initconst = {
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBook3,1", M_MB),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook3,1", M_MB),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook4,1", M_MB),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook5,1", M_MB_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook6,1", M_MB_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBook7,1", M_MB_7_1),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookAir1,1", M_MBA),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro1,1", M_MBP),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,1", M_MBP_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro2,2", M_MBP_2_2),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro2,1", M_MBP_2),
 	EFIFB_DMI_SYSTEM_ID("Apple Computer, Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro3,1", M_MBP_SR),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro4,1", M_MBP_4),
 	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,1", M_MBP_5_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,2", M_MBP_5_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro5,3", M_MBP_5_3),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,1", M_MBP_6_1),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro6,2", M_MBP_6_2),
+	EFIFB_DMI_SYSTEM_ID("Apple Inc.", "MacBookPro7,1", M_MBP_7_1),
 	{},
 };
 

From 142092e577255e33a4ab74c6baad04c9fb887927 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Wed, 22 Sep 2010 13:05:05 -0700
Subject: [PATCH 493/728] fbcon: fix lockdep warning from fbcon_deinit()

Fix the lockdep warning:

[   13.657164] INFO: trying to register non-static key.
[   13.657169] the code is fine but needs lockdep annotation.
[   13.657171] turning off the locking correctness validator.
[   13.657177] Pid: 622, comm: modprobe Not tainted 2.6.36-rc3c #8
[   13.657180] Call Trace:
[   13.657194]  [<c13002c8>] ? printk+0x18/0x20
[   13.657202]  [<c1056cf6>] register_lock_class+0x336/0x350
[   13.657208]  [<c1058bf9>] __lock_acquire+0x449/0x1180
[   13.657215]  [<c1059997>] lock_acquire+0x67/0x80
[   13.657222]  [<c1042bf1>] ? __cancel_work_timer+0x51/0x230
[   13.657227]  [<c1042c23>] __cancel_work_timer+0x83/0x230
[   13.657231]  [<c1042bf1>] ? __cancel_work_timer+0x51/0x230
[   13.657236]  [<c10582b2>] ? mark_held_locks+0x62/0x80
[   13.657243]  [<c10b3a2f>] ? kfree+0x7f/0xe0
[   13.657248]  [<c105853c>] ? trace_hardirqs_on_caller+0x11c/0x160
[   13.657253]  [<c105858b>] ? trace_hardirqs_on+0xb/0x10
[   13.657259]  [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0
[   13.657263]  [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0
[   13.657268]  [<c1042dea>] cancel_work_sync+0xa/0x10
[   13.657272]  [<c117f444>] fbcon_deinit+0xe4/0x1e0
...

The warning is caused by trying to cancel an uninitialized work from
fbcon_exit().  Fix it by adding a check for queue.func, similarly to other
places in this code.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/console/fbcon.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 84f842331dfa..7ccc967831f0 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -3508,7 +3508,7 @@ static void fbcon_exit(void)
 	softback_buf = 0UL;
 
 	for (i = 0; i < FB_MAX; i++) {
-		int pending;
+		int pending = 0;
 
 		mapped = 0;
 		info = registered_fb[i];
@@ -3516,7 +3516,8 @@ static void fbcon_exit(void)
 		if (info == NULL)
 			continue;
 
-		pending = cancel_work_sync(&info->queue);
+		if (info->queue.func)
+			pending = cancel_work_sync(&info->queue);
 		DPRINTK("fbcon: %s pending work\n", (pending ? "canceled" :
 			"no"));
 

From 1c2499ae87f828eabddf6483b0dfc11da1100c07 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Wed, 22 Sep 2010 13:05:06 -0700
Subject: [PATCH 494/728] /proc/pid/smaps: fix dirty pages accounting

Currently, /proc/<pid>/smaps has wrong dirty pages accounting.
Shared_Dirty and Private_Dirty output only pte dirty pages and ignore
PG_dirty page flag.  It is difference against documentation, but also
inconsistent against Referenced field.  (Referenced checks both pte and
page flags)

This patch fixes it.

Test program:

 large-array.c
 ---------------------------------------------------
 #include <stdio.h>
 #include <stdlib.h>
 #include <string.h>
 #include <unistd.h>

 char array[1*1024*1024*1024L];

 int main(void)
 {
         memset(array, 1, sizeof(array));
         pause();

         return 0;
 }
 ---------------------------------------------------

Test case:
 1. run ./large-array
 2. cat /proc/`pidof large-array`/smaps
 3. swapoff -a
 4. cat /proc/`pidof large-array`/smaps again

Test result:
 <before patch>

00601000-40601000 rw-p 00000000 00:00 0
Size:            1048576 kB
Rss:             1048576 kB
Pss:             1048576 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:    218992 kB   <-- showed pages as clean incorrectly
Private_Dirty:    829584 kB
Referenced:       388364 kB
Swap:                  0 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB

 <after patch>

00601000-40601000 rw-p 00000000 00:00 0
Size:            1048576 kB
Rss:             1048576 kB
Pss:             1048576 kB
Shared_Clean:          0 kB
Shared_Dirty:          0 kB
Private_Clean:         0 kB
Private_Dirty:   1048576 kB  <-- fixed
Referenced:       388480 kB
Swap:                  0 kB
KernelPageSize:        4 kB
MMUPageSize:           4 kB

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/task_mmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 271afc48b9a5..1dbca4e8cc16 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -363,13 +363,13 @@ static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
 			mss->referenced += PAGE_SIZE;
 		mapcount = page_mapcount(page);
 		if (mapcount >= 2) {
-			if (pte_dirty(ptent))
+			if (pte_dirty(ptent) || PageDirty(page))
 				mss->shared_dirty += PAGE_SIZE;
 			else
 				mss->shared_clean += PAGE_SIZE;
 			mss->pss += (PAGE_SIZE << PSS_SHIFT) / mapcount;
 		} else {
-			if (pte_dirty(ptent))
+			if (pte_dirty(ptent) || PageDirty(page))
 				mss->private_dirty += PAGE_SIZE;
 			else
 				mss->private_clean += PAGE_SIZE;

From cb1dcc0ff4b57873210100fc9d70defa81af43d4 Mon Sep 17 00:00:00 2001
From: Richard Weinberger <richard@nod.at>
Date: Wed, 22 Sep 2010 13:05:07 -0700
Subject: [PATCH 495/728] uml: fix compile warning

This fixes:
incompatible pointer type:  => 89
       arch/um/kernel/exec.c: warning: passing argument 2 of 'execve1' from
incompatible pointer type:  => 69, 85
       arch/um/kernel/exec.c: warning: passing argument 3 of 'execve1' from
incompatible pointer type:  => 69, 85

which was introduced by d7627467b7a8d ("Make do_execve() take a const
filename pointer")

Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/um/kernel/exec.c     | 6 +++---
 arch/um/kernel/internal.h | 2 +-
 arch/um/kernel/syscall.c  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index cd145eda3579..49b5e1eb3262 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -62,7 +62,7 @@ static long execve1(const char *file,
 	return error;
 }
 
-long um_execve(const char *file, char __user *__user *argv, char __user *__user *env)
+long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env)
 {
 	long err;
 
@@ -72,8 +72,8 @@ long um_execve(const char *file, char __user *__user *argv, char __user *__user
 	return err;
 }
 
-long sys_execve(const char __user *file, char __user *__user *argv,
-		char __user *__user *env)
+long sys_execve(const char __user *file, const char __user *const __user *argv,
+		const char __user *const __user *env)
 {
 	long error;
 	char *filename;
diff --git a/arch/um/kernel/internal.h b/arch/um/kernel/internal.h
index 1303a105fe91..5bf97db24a04 100644
--- a/arch/um/kernel/internal.h
+++ b/arch/um/kernel/internal.h
@@ -1 +1 @@
-extern long um_execve(const char *file, char __user *__user *argv, char __user *__user *env);
+extern long um_execve(const char *file, const char __user *const __user *argv, const char __user *const __user *env);
diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c
index 5ddb246626db..f958cb876ee3 100644
--- a/arch/um/kernel/syscall.c
+++ b/arch/um/kernel/syscall.c
@@ -60,8 +60,8 @@ int kernel_execve(const char *filename,
 
 	fs = get_fs();
 	set_fs(KERNEL_DS);
-	ret = um_execve(filename, (char __user *__user *)argv,
-			(char __user *__user *) envp);
+	ret = um_execve(filename, (const char __user *const __user *)argv,
+			(const char __user *const __user *) envp);
 	set_fs(fs);
 
 	return ret;

From fd02db9de73faebc51240619c7c7f99bee9f65c7 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Wed, 22 Sep 2010 13:05:09 -0700
Subject: [PATCH 496/728] drivers/video/sis/sis_main.c: prevent reading
 uninitialized stack memory

The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes
of uninitialized stack memory, because the "reserved" member of the
fb_vblank struct declared on the stack is not altered or zeroed before
being copied back to the user.  This patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/sis/sis_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 559bf1727a2b..b52f8e4ef1fd 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -1701,6 +1701,9 @@ static int	sisfb_ioctl(struct fb_info *info, unsigned int cmd,
 		break;
 
 	   case FBIOGET_VBLANK:
+
+		memset(&sisvbblank, 0, sizeof(struct fb_vblank));
+
 		sisvbblank.count = 0;
 		sisvbblank.flags = sisfb_setupvbblankflags(ivideo, &sisvbblank.vcount, &sisvbblank.hcount);
 

From e85bfd3aa7a34fa963bb268a676b41694e6dcf96 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Wed, 22 Sep 2010 13:05:10 -0700
Subject: [PATCH 497/728] oom: filter unkillable tasks from tasklist dump

/proc/sys/vm/oom_dump_tasks is enabled by default, so it's necessary to
limit as much information as possible that it should emit.

The tasklist dump should be filtered to only those tasks that are eligible
for oom kill.  This is already done for memcg ooms, but this patch extends
it to both cpuset and mempolicy ooms as well as init.

In addition to suppressing irrelevant information, this also reduces
confusion since users currently don't know which tasks in the tasklist
aren't eligible for kill (such as those attached to cpusets or bound to
mempolicies with a disjoint set of mems or nodes, respectively) since that
information is not shown.

Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/oom_kill.c | 40 +++++++++++++++++++---------------------
 1 file changed, 19 insertions(+), 21 deletions(-)

diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 859250c7dc06..4029583a1024 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -121,8 +121,8 @@ struct task_struct *find_lock_task_mm(struct task_struct *p)
 }
 
 /* return true if the task is not adequate as candidate victim task. */
-static bool oom_unkillable_task(struct task_struct *p, struct mem_cgroup *mem,
-			   const nodemask_t *nodemask)
+static bool oom_unkillable_task(struct task_struct *p,
+		const struct mem_cgroup *mem, const nodemask_t *nodemask)
 {
 	if (is_global_init(p))
 		return true;
@@ -344,26 +344,24 @@ static struct task_struct *select_bad_process(unsigned int *ppoints,
 /**
  * dump_tasks - dump current memory state of all system tasks
  * @mem: current's memory controller, if constrained
+ * @nodemask: nodemask passed to page allocator for mempolicy ooms
  *
- * Dumps the current memory state of all system tasks, excluding kernel threads.
+ * Dumps the current memory state of all eligible tasks.  Tasks not in the same
+ * memcg, not in the same cpuset, or bound to a disjoint set of mempolicy nodes
+ * are not shown.
  * State information includes task's pid, uid, tgid, vm size, rss, cpu, oom_adj
  * value, oom_score_adj value, and name.
  *
- * If the actual is non-NULL, only tasks that are a member of the mem_cgroup are
- * shown.
- *
  * Call with tasklist_lock read-locked.
  */
-static void dump_tasks(const struct mem_cgroup *mem)
+static void dump_tasks(const struct mem_cgroup *mem, const nodemask_t *nodemask)
 {
 	struct task_struct *p;
 	struct task_struct *task;
 
 	pr_info("[ pid ]   uid  tgid total_vm      rss cpu oom_adj oom_score_adj name\n");
 	for_each_process(p) {
-		if (p->flags & PF_KTHREAD)
-			continue;
-		if (mem && !task_in_mem_cgroup(p, mem))
+		if (oom_unkillable_task(p, mem, nodemask))
 			continue;
 
 		task = find_lock_task_mm(p);
@@ -386,7 +384,7 @@ static void dump_tasks(const struct mem_cgroup *mem)
 }
 
 static void dump_header(struct task_struct *p, gfp_t gfp_mask, int order,
-							struct mem_cgroup *mem)
+			struct mem_cgroup *mem, const nodemask_t *nodemask)
 {
 	task_lock(current);
 	pr_warning("%s invoked oom-killer: gfp_mask=0x%x, order=%d, "
@@ -399,7 +397,7 @@ static void dump_header(struct task_struct *p, gfp_t gfp_mask, int order,
 	mem_cgroup_print_oom_info(mem, p);
 	show_mem();
 	if (sysctl_oom_dump_tasks)
-		dump_tasks(mem);
+		dump_tasks(mem, nodemask);
 }
 
 #define K(x) ((x) << (PAGE_SHIFT-10))
@@ -441,7 +439,7 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
 	unsigned int victim_points = 0;
 
 	if (printk_ratelimit())
-		dump_header(p, gfp_mask, order, mem);
+		dump_header(p, gfp_mask, order, mem, nodemask);
 
 	/*
 	 * If the task is already exiting, don't alarm the sysadmin or kill
@@ -487,7 +485,7 @@ static int oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
  * Determines whether the kernel must panic because of the panic_on_oom sysctl.
  */
 static void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask,
-				int order)
+				int order, const nodemask_t *nodemask)
 {
 	if (likely(!sysctl_panic_on_oom))
 		return;
@@ -501,7 +499,7 @@ static void check_panic_on_oom(enum oom_constraint constraint, gfp_t gfp_mask,
 			return;
 	}
 	read_lock(&tasklist_lock);
-	dump_header(NULL, gfp_mask, order, NULL);
+	dump_header(NULL, gfp_mask, order, NULL, nodemask);
 	read_unlock(&tasklist_lock);
 	panic("Out of memory: %s panic_on_oom is enabled\n",
 		sysctl_panic_on_oom == 2 ? "compulsory" : "system-wide");
@@ -514,7 +512,7 @@ void mem_cgroup_out_of_memory(struct mem_cgroup *mem, gfp_t gfp_mask)
 	unsigned int points = 0;
 	struct task_struct *p;
 
-	check_panic_on_oom(CONSTRAINT_MEMCG, gfp_mask, 0);
+	check_panic_on_oom(CONSTRAINT_MEMCG, gfp_mask, 0, NULL);
 	limit = mem_cgroup_get_limit(mem) >> PAGE_SHIFT;
 	read_lock(&tasklist_lock);
 retry:
@@ -646,6 +644,7 @@ static void clear_system_oom(void)
 void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
 		int order, nodemask_t *nodemask)
 {
+	const nodemask_t *mpol_mask;
 	struct task_struct *p;
 	unsigned long totalpages;
 	unsigned long freed = 0;
@@ -675,7 +674,8 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
 	 */
 	constraint = constrained_alloc(zonelist, gfp_mask, nodemask,
 						&totalpages);
-	check_panic_on_oom(constraint, gfp_mask, order);
+	mpol_mask = (constraint == CONSTRAINT_MEMORY_POLICY) ? nodemask : NULL;
+	check_panic_on_oom(constraint, gfp_mask, order, mpol_mask);
 
 	read_lock(&tasklist_lock);
 	if (sysctl_oom_kill_allocating_task &&
@@ -693,15 +693,13 @@ void out_of_memory(struct zonelist *zonelist, gfp_t gfp_mask,
 	}
 
 retry:
-	p = select_bad_process(&points, totalpages, NULL,
-			constraint == CONSTRAINT_MEMORY_POLICY ? nodemask :
-								 NULL);
+	p = select_bad_process(&points, totalpages, NULL, mpol_mask);
 	if (PTR_ERR(p) == -1UL)
 		goto out;
 
 	/* Found nothing?!?! Either we hang forever, or we panic. */
 	if (!p) {
-		dump_header(NULL, gfp_mask, order, NULL);
+		dump_header(NULL, gfp_mask, order, NULL, mpol_mask);
 		read_unlock(&tasklist_lock);
 		panic("Out of memory and no killable processes...\n");
 	}

From df08cdc7ef606509debe7677c439be0ca48790e4 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 22 Sep 2010 13:05:11 -0700
Subject: [PATCH 498/728] drivers/pci/intel-iommu.c: fix build with older gcc's

drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw':
drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available
drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here

Move the offending function (and its siblings) to top-of-file, remove the
forward declaration.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441

Reported-by: Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pci/intel-iommu.c | 90 +++++++++++++++++++--------------------
 1 file changed, 43 insertions(+), 47 deletions(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index c3ceebb5be84..5ac2aa783f58 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -71,6 +71,49 @@
 #define DMA_32BIT_PFN		IOVA_PFN(DMA_BIT_MASK(32))
 #define DMA_64BIT_PFN		IOVA_PFN(DMA_BIT_MASK(64))
 
+/* page table handling */
+#define LEVEL_STRIDE		(9)
+#define LEVEL_MASK		(((u64)1 << LEVEL_STRIDE) - 1)
+
+static inline int agaw_to_level(int agaw)
+{
+	return agaw + 2;
+}
+
+static inline int agaw_to_width(int agaw)
+{
+	return 30 + agaw * LEVEL_STRIDE;
+}
+
+static inline int width_to_agaw(int width)
+{
+	return (width - 30) / LEVEL_STRIDE;
+}
+
+static inline unsigned int level_to_offset_bits(int level)
+{
+	return (level - 1) * LEVEL_STRIDE;
+}
+
+static inline int pfn_level_offset(unsigned long pfn, int level)
+{
+	return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
+}
+
+static inline unsigned long level_mask(int level)
+{
+	return -1UL << level_to_offset_bits(level);
+}
+
+static inline unsigned long level_size(int level)
+{
+	return 1UL << level_to_offset_bits(level);
+}
+
+static inline unsigned long align_to_level(unsigned long pfn, int level)
+{
+	return (pfn + level_size(level) - 1) & level_mask(level);
+}
 
 /* VT-d pages must always be _smaller_ than MM pages. Otherwise things
    are never going to work. */
@@ -434,8 +477,6 @@ void free_iova_mem(struct iova *iova)
 }
 
 
-static inline int width_to_agaw(int width);
-
 static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw)
 {
 	unsigned long sagaw;
@@ -646,51 +687,6 @@ out:
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-/* page table handling */
-#define LEVEL_STRIDE		(9)
-#define LEVEL_MASK		(((u64)1 << LEVEL_STRIDE) - 1)
-
-static inline int agaw_to_level(int agaw)
-{
-	return agaw + 2;
-}
-
-static inline int agaw_to_width(int agaw)
-{
-	return 30 + agaw * LEVEL_STRIDE;
-
-}
-
-static inline int width_to_agaw(int width)
-{
-	return (width - 30) / LEVEL_STRIDE;
-}
-
-static inline unsigned int level_to_offset_bits(int level)
-{
-	return (level - 1) * LEVEL_STRIDE;
-}
-
-static inline int pfn_level_offset(unsigned long pfn, int level)
-{
-	return (pfn >> level_to_offset_bits(level)) & LEVEL_MASK;
-}
-
-static inline unsigned long level_mask(int level)
-{
-	return -1UL << level_to_offset_bits(level);
-}
-
-static inline unsigned long level_size(int level)
-{
-	return 1UL << level_to_offset_bits(level);
-}
-
-static inline unsigned long align_to_level(unsigned long pfn, int level)
-{
-	return (pfn + level_size(level) - 1) & level_mask(level);
-}
-
 static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 				      unsigned long pfn)
 {

From a247c3a97a0216b18a46243eda26081f1928ec37 Mon Sep 17 00:00:00 2001
From: Andrea Arcangeli <aarcange@redhat.com>
Date: Wed, 22 Sep 2010 13:05:12 -0700
Subject: [PATCH 499/728] rmap: fix walk during fork

The below bug in fork led to the rmap walk finding the parent huge-pmd
twice instead of just once, because the anon_vma_chain objects of the
child vma still point to the vma->vm_mm of the parent.

The patch fixes it by making the rmap walk accurate during fork.  It's not
a big deal normally but it worth being accurate considering the cost is
the same.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/fork.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/fork.c b/kernel/fork.c
index b7e9d60a675d..c445f8cc408d 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -356,10 +356,10 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm)
 		if (IS_ERR(pol))
 			goto fail_nomem_policy;
 		vma_set_policy(tmp, pol);
+		tmp->vm_mm = mm;
 		if (anon_vma_fork(tmp, mpnt))
 			goto fail_nomem_anon_vma_fork;
 		tmp->vm_flags &= ~VM_LOCKED;
-		tmp->vm_mm = mm;
 		tmp->vm_next = tmp->vm_prev = NULL;
 		file = tmp->vm_file;
 		if (file) {

From 2aeadc30de45a72648f271603203ab392b80f607 Mon Sep 17 00:00:00 2001
From: Andrea Arcangeli <aarcange@redhat.com>
Date: Wed, 22 Sep 2010 13:05:12 -0700
Subject: [PATCH 500/728] mmap: call unlink_anon_vmas() in __split_vma() in
 case of error

If __split_vma fails because of an out of memory condition the
anon_vma_chain isn't teardown and freed potentially leading to rmap walks
accessing freed vma information plus there's a memleak.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Johannes Weiner <jweiner@redhat.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/mmap.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/mm/mmap.c b/mm/mmap.c
index 6128dc8e5ede..00161a48a451 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2009,6 +2009,7 @@ static int __split_vma(struct mm_struct * mm, struct vm_area_struct * vma,
 			removed_exe_file_vma(mm);
 		fput(new->vm_file);
 	}
+	unlink_anon_vmas(new);
  out_free_mpol:
 	mpol_put(pol);
  out_free_vma:

From f501ed524b26ba1b739b7f7feb0a0e1496878769 Mon Sep 17 00:00:00 2001
From: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Date: Wed, 22 Sep 2010 13:05:13 -0700
Subject: [PATCH 501/728] rtc: s3c: balance state changes of wakeup flag

This change resolves a problem about unbalanced calls of
enable_irq_wakeup() and disable_irq_wakeup() for alarm interrupt.

Bug reproduction:

root@eb600:~# echo 0 > /sys/class/rtc/rtc0/wakealarm

WARNING: at kernel/irq/manage.c:361 set_irq_wake+0x7c/0xe4()
 Unbalanced IRQ 46 wake disable
Modules linked in:
[<c0025708>] (unwind_backtrace+0x0/0xd8) from [<c003358c>] (warn_slowpath_common+0x44/0x5c)
[<c003358c>] (warn_slowpath_common+0x44/0x5c) from [<c00335dc>] (warn_slowpath_fmt+0x24/0x30)
[<c00335dc>] (warn_slowpath_fmt+0x24/0x30) from [<c0058c20>] (set_irq_wake+0x7c/0xe4)
[<c0058c20>] (set_irq_wake+0x7c/0xe4) from [<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8)
[<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8) from [<c01b47a0>] (rtc_set_alarm+0x60/0x74)
[<c01b47a0>] (rtc_set_alarm+0x60/0x74) from [<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8)
[<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8) from [<c01891ec>] (dev_attr_store+0x20/0x24)
[<c01891ec>] (dev_attr_store+0x20/0x24) from [<c00be934>] (sysfs_write_file+0x104/0x13c)
[<c00be934>] (sysfs_write_file+0x104/0x13c) from [<c0080e7c>] (vfs_write+0xb0/0x158)
[<c0080e7c>] (vfs_write+0xb0/0x158) from [<c0080fcc>] (sys_write+0x3c/0x68)
[<c0080fcc>] (sys_write+0x3c/0x68) from [<c0020ec0>] (ret_fast_syscall+0x0/0x28)

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ben Dooks <ben@fluff.org.uk>
Cc: Atul Dahiya <atul.dahiya@samsung.com>
Cc: Taekgyun Ko <taeggyun.ko@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-s3c.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index a0d3ec89d412..f57a87f4ae96 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -310,11 +310,6 @@ static int s3c_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	s3c_rtc_setaie(alrm->enabled);
 
-	if (alrm->enabled)
-		enable_irq_wake(s3c_rtc_alarmno);
-	else
-		disable_irq_wake(s3c_rtc_alarmno);
-
 	return 0;
 }
 
@@ -587,6 +582,10 @@ static int s3c_rtc_suspend(struct platform_device *pdev, pm_message_t state)
 		ticnt_en_save &= S3C64XX_RTCCON_TICEN;
 	}
 	s3c_rtc_enable(pdev, 0);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(s3c_rtc_alarmno);
+
 	return 0;
 }
 
@@ -600,6 +599,10 @@ static int s3c_rtc_resume(struct platform_device *pdev)
 		tmp = readb(s3c_rtc_base + S3C2410_RTCCON);
 		writeb(tmp | ticnt_en_save, s3c_rtc_base + S3C2410_RTCCON);
 	}
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(s3c_rtc_alarmno);
+
 	return 0;
 }
 #else

From 561f8182dbf24b1be9207038aa5f82e34be4bad1 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Wed, 22 Sep 2010 13:05:15 -0700
Subject: [PATCH 502/728] ipmi: fix hardcoded ipmi device exit path warning

When modprobe.conf has
options ipmi_si type="kcs" ports=0xCA2 regspacings="4"

ipmi_si can be loaded properly, but when try to unload it get:

Sep 20 15:00:27 xx abrt: Kerneloops: Reported 1 kernel oopses to Abrt
Sep 20 15:00:27 xx abrtd: Directory 'kerneloops-1285020027-1' creation detected
Sep 20 15:00:27 xx abrtd: New crash /var/spool/abrt/kerneloops-1285020027-1, processing
Sep 20 15:01:09 xx kernel: ------------[ cut here ]------------
Sep 20 15:01:09 xx kernel: WARNING: at drivers/base/driver.c:262 driver_unregister+0x8a/0xa0()
Sep 20 15:01:09 xx kernel: Hardware name: Sun Fire x4800
Sep 20 15:01:09 xx kernel: Unexpected driver unregister!
Sep 20 15:01:09 xx kernel: Modules linked in: ipmi_si(-) ipmi_msghandler ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb3i iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun kvm_intel kvm uinput sg ses enclosure ahci libahci pcspkr i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support igb dca i7core_edac edac_core ext3 jbd mbcache sd_mod crc_t10dif megaraid_sas [last unloaded: ipmi_devintf]
Sep 20 15:01:09 xx kernel: Pid: 10625, comm: modprobe Tainted: G        W   2.6.36-rc5-tip+ #6
Sep 20 15:01:09 xx kernel: Call Trace:
Sep 20 15:01:09 xx kernel: [<ffffffff810600df>] warn_slowpath_common+0x7f/0xc0
Sep 20 15:01:09 xx kernel: [<ffffffff810601d6>] warn_slowpath_fmt+0x46/0x50
Sep 20 15:01:09 xx kernel: [<ffffffff812ff60a>] driver_unregister+0x8a/0xa0
Sep 20 15:01:09 xx kernel: [<ffffffff812ae112>] pnp_unregister_driver+0x12/0x20
Sep 20 15:01:09 xx kernel: [<ffffffffa01d0327>] cleanup_ipmi_si+0x3c/0xa7 [ipmi_si]
Sep 20 15:01:09 xx kernel: [<ffffffff81099a60>] sys_delete_module+0x1a0/0x270
Sep 20 15:01:09 xx kernel: [<ffffffff814b7070>] ? do_page_fault+0x150/0x320
Sep 20 15:01:09 xx kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
Sep 20 15:01:09 xx kernel: ---[ end trace 0d1967161adcee0d ]---

We need to check if ipmi_pnp_driver is loaded before we try to unload it.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Corey Minyard <minyard@acm.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 2be457a0c0c3..7bd7c45b53ef 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -305,6 +305,9 @@ static int num_force_kipmid;
 #ifdef CONFIG_PCI
 static int pci_registered;
 #endif
+#ifdef CONFIG_ACPI
+static int pnp_registered;
+#endif
 #ifdef CONFIG_PPC_OF
 static int of_registered;
 #endif
@@ -3359,6 +3362,7 @@ static __devinit int init_ipmi_si(void)
 
 #ifdef CONFIG_ACPI
 	pnp_register_driver(&ipmi_pnp_driver);
+	pnp_registered = 1;
 #endif
 
 #ifdef CONFIG_DMI
@@ -3526,7 +3530,8 @@ static __exit void cleanup_ipmi_si(void)
 		pci_unregister_driver(&ipmi_pci_driver);
 #endif
 #ifdef CONFIG_ACPI
-	pnp_unregister_driver(&ipmi_pnp_driver);
+	if (pnp_registered)
+		pnp_unregister_driver(&ipmi_pnp_driver);
 #endif
 
 #ifdef CONFIG_PPC_OF

From 9ecd4e1689208afe9b059a5ce1333acb2f42c4d2 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 22 Sep 2010 17:07:27 -0700
Subject: [PATCH 503/728] tracing/x86: Don't use mcount in pvclock.c

When using a paravirt clock, pvclock.c can be used by sched_clock(),
which in turn is used by the tracing mechanism for timestamps,
which leads to infinite recursion.

Disable mcount/tracing for pvclock.o.

Cc: stable@kernel.org
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
LKML-Reference: <4C9A9A3F.4040201@goop.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0925676266bd..882bbff9d50b 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -11,6 +11,7 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
 CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
+CFLAGS_REMOVE_pvclock.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
 endif

From 258af47479980d8238a04568b94a4e55aa1cb537 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <srostedt@redhat.com>
Date: Wed, 22 Sep 2010 22:22:25 -0400
Subject: [PATCH 504/728] tracing/x86: Don't use mcount in kvmclock.c

The guest can use the paravirt clock in kvmclock.c which is used
by sched_clock(), which in turn is used by the tracing mechanism
for timestamps, which leads to infinite recursion.

Disable mcount/tracing for kvmclock.o.

Cc: stable@kernel.org
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/kernel/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 882bbff9d50b..fedf32a8c3ec 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -12,6 +12,7 @@ CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
 CFLAGS_REMOVE_paravirt-spinlocks.o = -pg
 CFLAGS_REMOVE_pvclock.o = -pg
+CFLAGS_REMOVE_kvmclock.o = -pg
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
 endif

From 9b74f7348f214b1f99819f0d0da4a1cbabb1e740 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed, 22 Sep 2010 19:10:44 +0100
Subject: [PATCH 505/728] drm/i915: Fix 945GM regression in e259befd

A minor typo caused a single fence register to be incorrectly
programmed, resulting in occassional tiling corruption.

Reported-and-tested-by: Hans de Bruin <bruinjm@xs4all.nl>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18962
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_gem.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index cf4ffbee1c00..bced9b25c71e 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2400,7 +2400,7 @@ i915_gem_clear_fence_reg(struct drm_gem_object *obj)
 		I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
 		break;
 	case 3:
-		if (obj_priv->fence_reg > 8)
+		if (obj_priv->fence_reg >= 8)
 			fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg - 8) * 4;
 		else
 	case 2:

From 1d5b4c0fa9ff79a4f01e5efc1caefd16b190a3dc Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 22 Sep 2010 21:29:59 +0100
Subject: [PATCH 506/728] ARM: 6406/1: at91sam9g45: fix i2c bus speed

Use a correct udelay value to get bus speed around 100KHz. The udelay
value was most likely copied from the older devices, but the 9g45
is signicantly faster (400MHz, DDR, ..), so a udelay of 2 gives a
bus speed of around 190KHz, which is too fast for some devices.
A udelay value of 5 gives a bus speed of around 90KHz here.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9g45_devices.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 5e71ccd5e7d3..1276babf84d5 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -426,7 +426,7 @@ static struct i2c_gpio_platform_data pdata_i2c0 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PA21,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi0_device = {
@@ -440,7 +440,7 @@ static struct i2c_gpio_platform_data pdata_i2c1 = {
 	.sda_is_open_drain	= 1,
 	.scl_pin		= AT91_PIN_PB11,
 	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
+	.udelay			= 5,		/* ~100 kHz */
 };
 
 static struct platform_device at91sam9g45_twi1_device = {

From 2f27bf834e1d0a06e83d7458b535891c552271aa Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Mon, 20 Sep 2010 04:10:43 +0100
Subject: [PATCH 507/728] ARM: 6401/1: plug a race in the alignment trap
 handler

When the policy for user space is to ignore misaligned accesses from user
space, the processor then performs a documented rotation on the accessed
data.  This is the result of the access being trapped, and the kernel
disabling the alignment trap before returning to user space again.

In kernel space we always want misaligned accesses to be fixed up.  This
is enforced by always re-enabling the alignment trap on every entry into
kernel space from user space.  No such re-enabling is performed when an
exception occurs while already in kernel space as the alignment trap is
always supposed to be enabled in that case.

There is however a small race window when a misaligned access in user
space is trapped and the alignment trap disabled, but the CPU didn't
return to user space just yet.  Any exception would be entered from kernel
space at that point and the kernel would then execute with the alignment
trap disabled.

Thanks to Maxime Bizon <mbizon@freebox.fr> for providing a test module
that made this issue reproducible.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/alignment.c | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index d073b64ae87e..724ba3bce72c 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -885,8 +885,23 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (ai_usermode & UM_SIGNAL)
 		force_sig(SIGBUS, current);
-	else
-		set_cr(cr_no_alignment);
+	else {
+		/*
+		 * We're about to disable the alignment trap and return to
+		 * user space.  But if an interrupt occurs before actually
+		 * reaching user space, then the IRQ vector entry code will
+		 * notice that we were still in kernel space and therefore
+		 * the alignment trap won't be re-enabled in that case as it
+		 * is presumed to be always on from kernel space.
+		 * Let's prevent that race by disabling interrupts here (they
+		 * are disabled on the way back to user space anyway in
+		 * entry-common.S) and disable the alignment trap only if
+		 * there is no work pending for this thread.
+		 */
+		raw_local_irq_disable();
+		if (!(current_thread_info()->flags & _TIF_WORK_MASK))
+			set_cr(cr_no_alignment);
+	}
 
 	return 0;
 }

From e9bf51971157e367aabfc111a8219db010f69cd4 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 20 Sep 2010 14:33:07 +0200
Subject: [PATCH 508/728] x86/amd-iommu: Set iommu configuration flags in
 enable-loop

This patch moves the setting of the configuration and
feature flags out out the acpi table parsing path and moves
it into the iommu-enable path. This is needed to reliably
fix resume-from-s3.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  3 ++
 arch/x86/kernel/amd_iommu_init.c       | 49 ++++++++++++++------------
 2 files changed, 30 insertions(+), 22 deletions(-)

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 7014e88bc779..ef2d5cd7d7e7 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -368,6 +368,9 @@ struct amd_iommu {
 	/* capabilities of that IOMMU read from ACPI */
 	u32 cap;
 
+	/* flags read from acpi table */
+	u8 acpi_flags;
+
 	/*
 	 * Capability pointer. There could be more than one IOMMU per PCI
 	 * device function if there are more than one AMD IOMMU capability
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 3cc63e2b8dd4..85e9817ead43 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -649,29 +649,9 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	struct ivhd_entry *e;
 
 	/*
-	 * First set the recommended feature enable bits from ACPI
-	 * into the IOMMU control registers
+	 * First save the recommended feature enable bits from ACPI
 	 */
-	h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
-		iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
-		iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
-
-	h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
-		iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
-		iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
-
-	h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
-		iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
-		iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
-
-	h->flags & IVHD_FLAG_ISOC_EN_MASK ?
-		iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
-		iommu_feature_disable(iommu, CONTROL_ISOC_EN);
-
-	/*
-	 * make IOMMU memory accesses cache coherent
-	 */
-	iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
+	iommu->acpi_flags = h->flags;
 
 	/*
 	 * Done. Now parse the device entries
@@ -1116,6 +1096,30 @@ static void init_device_table(void)
 	}
 }
 
+static void iommu_init_flags(struct amd_iommu *iommu)
+{
+	iommu->acpi_flags & IVHD_FLAG_HT_TUN_EN_MASK ?
+		iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
+		iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
+
+	iommu->acpi_flags & IVHD_FLAG_PASSPW_EN_MASK ?
+		iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
+		iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
+
+	iommu->acpi_flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
+		iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
+		iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
+
+	iommu->acpi_flags & IVHD_FLAG_ISOC_EN_MASK ?
+		iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
+		iommu_feature_disable(iommu, CONTROL_ISOC_EN);
+
+	/*
+	 * make IOMMU memory accesses cache coherent
+	 */
+	iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
+}
+
 /*
  * This function finally enables all IOMMUs found in the system after
  * they have been initialized
@@ -1126,6 +1130,7 @@ static void enable_iommus(void)
 
 	for_each_iommu(iommu) {
 		iommu_disable(iommu);
+		iommu_init_flags(iommu);
 		iommu_set_device_table(iommu);
 		iommu_enable_command_buffer(iommu);
 		iommu_enable_event_buffer(iommu);

From 4c894f47bb49284008073d351c0ddaac8860864e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 23 Sep 2010 15:15:19 +0200
Subject: [PATCH 509/728] x86/amd-iommu: Work around S3 BIOS bug

This patch adds a workaround for an IOMMU BIOS problem to
the AMD IOMMU driver. The result of the bug is that the
IOMMU does not execute commands anymore when the system
comes out of the S3 state resulting in system failure. The
bug in the BIOS is that is does not restore certain hardware
specific registers correctly. This workaround reads out the
contents of these registers at boot time and restores them
on resume from S3. The workaround is limited to the specific
IOMMU chipset where this problem occurs.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_proto.h |  6 ++++++
 arch/x86/include/asm/amd_iommu_types.h |  9 +++++++++
 arch/x86/kernel/amd_iommu_init.c       | 18 ++++++++++++++++++
 include/linux/pci_ids.h                |  3 +++
 4 files changed, 36 insertions(+)

diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h
index d2544f1d705d..cb030374b90a 100644
--- a/arch/x86/include/asm/amd_iommu_proto.h
+++ b/arch/x86/include/asm/amd_iommu_proto.h
@@ -38,4 +38,10 @@ static inline void amd_iommu_stats_init(void) { }
 
 #endif /* !CONFIG_AMD_IOMMU_STATS */
 
+static inline bool is_rd890_iommu(struct pci_dev *pdev)
+{
+	return (pdev->vendor == PCI_VENDOR_ID_ATI) &&
+	       (pdev->device == PCI_DEVICE_ID_RD890_IOMMU);
+}
+
 #endif /* _ASM_X86_AMD_IOMMU_PROTO_H  */
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index ef2d5cd7d7e7..08616180deaf 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -414,6 +414,15 @@ struct amd_iommu {
 
 	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
+
+	/*
+	 * This array is required to work around a potential BIOS bug.
+	 * The BIOS may miss to restore parts of the PCI configuration
+	 * space when the system resumes from S3. The result is that the
+	 * IOMMU does not execute commands anymore which leads to system
+	 * failure.
+	 */
+	u32 cache_cfg[4];
 };
 
 /*
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 85e9817ead43..5a170cbbbed8 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -632,6 +632,13 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
 					MMIO_GET_LD(range));
 	iommu->evt_msi_num = MMIO_MSI_NUM(misc);
+
+	if (is_rd890_iommu(iommu->dev)) {
+		pci_read_config_dword(iommu->dev, 0xf0, &iommu->cache_cfg[0]);
+		pci_read_config_dword(iommu->dev, 0xf4, &iommu->cache_cfg[1]);
+		pci_read_config_dword(iommu->dev, 0xf8, &iommu->cache_cfg[2]);
+		pci_read_config_dword(iommu->dev, 0xfc, &iommu->cache_cfg[3]);
+	}
 }
 
 /*
@@ -1120,6 +1127,16 @@ static void iommu_init_flags(struct amd_iommu *iommu)
 	iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
 }
 
+static void iommu_apply_quirks(struct amd_iommu *iommu)
+{
+	if (is_rd890_iommu(iommu->dev)) {
+		pci_write_config_dword(iommu->dev, 0xf0, iommu->cache_cfg[0]);
+		pci_write_config_dword(iommu->dev, 0xf4, iommu->cache_cfg[1]);
+		pci_write_config_dword(iommu->dev, 0xf8, iommu->cache_cfg[2]);
+		pci_write_config_dword(iommu->dev, 0xfc, iommu->cache_cfg[3]);
+	}
+}
+
 /*
  * This function finally enables all IOMMUs found in the system after
  * they have been initialized
@@ -1130,6 +1147,7 @@ static void enable_iommus(void)
 
 	for_each_iommu(iommu) {
 		iommu_disable(iommu);
+		iommu_apply_quirks(iommu);
 		iommu_init_flags(iommu);
 		iommu_set_device_table(iommu);
 		iommu_enable_command_buffer(iommu);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 10d33309e9a6..570fddeb0388 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -393,6 +393,9 @@
 #define PCI_DEVICE_ID_VLSI_82C147	0x0105
 #define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
 
+/* AMD RD890 Chipset */
+#define PCI_DEVICE_ID_RD890_IOMMU	0x5a23
+
 #define PCI_VENDOR_ID_ADL		0x1005
 #define PCI_DEVICE_ID_ADL_2301		0x2301
 

From 04e0463e088b41060c08c255eb0d3278a504f094 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 23 Sep 2010 16:12:48 +0200
Subject: [PATCH 510/728] x86/amd-iommu: Fix rounding-bug in __unmap_single

In the __unmap_single function the dma_addr is rounded down
to a page boundary before the dma pages are unmapped. The
address is later also used to flush the TLB entries for that
mapping. But without the offset into the dma page the amount
of pages to flush might be miscalculated in the TLB flushing
path. This patch fixes this bug by using the original
address to flush the TLB.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index fa044e1e30a2..679b6450382b 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1953,6 +1953,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom,
 			   size_t size,
 			   int dir)
 {
+	dma_addr_t flush_addr;
 	dma_addr_t i, start;
 	unsigned int pages;
 
@@ -1960,6 +1961,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom,
 	    (dma_addr + size > dma_dom->aperture_size))
 		return;
 
+	flush_addr = dma_addr;
 	pages = iommu_num_pages(dma_addr, size, PAGE_SIZE);
 	dma_addr &= PAGE_MASK;
 	start = dma_addr;
@@ -1974,7 +1976,7 @@ static void __unmap_single(struct dma_ops_domain *dma_dom,
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
 
 	if (amd_iommu_unmap_flush || dma_dom->need_flush) {
-		iommu_flush_pages(&dma_dom->domain, dma_addr, size);
+		iommu_flush_pages(&dma_dom->domain, flush_addr, size);
 		dma_dom->need_flush = false;
 	}
 }

From 6bbfb2653177a00f70e57e53625502d43804fed0 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Sun, 19 Sep 2010 19:02:31 +0200
Subject: [PATCH 511/728] KVM: fix irqfd assign/deassign race

I think I see the following (theoretical) race:

During irqfd assign, we drop irqfds lock before we
schedule inject work. Therefore, deassign running
on another CPU could cause shutdown and flush to run
before inject, causing user after free in inject.

A simple fix it to schedule inject under the lock.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 virt/kvm/eventfd.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
index 66cf65b510b1..c1f1e3c62984 100644
--- a/virt/kvm/eventfd.c
+++ b/virt/kvm/eventfd.c
@@ -218,7 +218,6 @@ kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
 	events = file->f_op->poll(file, &irqfd->pt);
 
 	list_add_tail(&irqfd->list, &kvm->irqfds.items);
-	spin_unlock_irq(&kvm->irqfds.lock);
 
 	/*
 	 * Check if there was an event already pending on the eventfd
@@ -227,6 +226,8 @@ kvm_irqfd_assign(struct kvm *kvm, int fd, int gsi)
 	if (events & POLLIN)
 		schedule_work(&irqfd->inject);
 
+	spin_unlock_irq(&kvm->irqfds.lock);
+
 	/*
 	 * do not drop the file until the irqfd is fully initialized, otherwise
 	 * we might race against the POLLHUP

From ca242ac9960dc61530e25a2c190e4e13fd5f1ecb Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 21 Sep 2010 19:59:43 +0200
Subject: [PATCH 512/728] KVM: Fix reboot on Intel hosts

When we reboot, we disable vmx extensions or otherwise INIT gets blocked.
If a task on another cpu hits a vmx instruction, it will fault if vmx is
disabled.  We trap that to avoid a nasty oops and spin until the reboot
completes.

Problem is, we sleep with interrupts disabled.  This blocks smp_send_stop()
from running, and the reboot process halts.

Fix by enabling interrupts before spinning.

KVM-Stable-Tag.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 virt/kvm/kvm_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index d4853a54771a..5186e728c53e 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1970,10 +1970,12 @@ static int kvm_cpu_hotplug(struct notifier_block *notifier, unsigned long val,
 
 asmlinkage void kvm_handle_fault_on_reboot(void)
 {
-	if (kvm_rebooting)
+	if (kvm_rebooting) {
 		/* spin while reset goes on */
+		local_irq_enable();
 		while (true)
 			;
+	}
 	/* Fault while not rebooting.  We want the trace. */
 	BUG();
 }

From b3a084b9b684622b149e8dcf03855bf0d5fb588b Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Wed, 22 Sep 2010 08:38:44 +0200
Subject: [PATCH 513/728] rcu: rcu_read_lock_bh_held(): disabling irqs also
 disables bh

rcu_dereference_bh() doesnt know yet about hard irq being disabled, so
lockdep can trigger in netpoll_rx() after commit f0f9deae9e7c4 (netpoll:
Disable IRQ around RCU dereference in netpoll_rx)

Reported-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
---
 include/linux/rcupdate.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 9fbc54a2585d..83af1f8d8b74 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -454,7 +454,7 @@ static inline notrace void rcu_read_unlock_sched_notrace(void)
  * Makes rcu_dereference_check() do the dirty work.
  */
 #define rcu_dereference_bh(p) \
-		rcu_dereference_check(p, rcu_read_lock_bh_held())
+		rcu_dereference_check(p, rcu_read_lock_bh_held() || irqs_disabled())
 
 /**
  * rcu_dereference_sched - fetch RCU-protected pointer, checking for RCU-sched

From fd429a0842c61b60e02a7e63430a609957821c67 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 23 Sep 2010 16:40:22 +0100
Subject: [PATCH 514/728] MN10300: Fix endianess of ext2 bitops

The MN10300 arch ext2 bitops assume a big-endian kernel, but the MN10300
arch only runs in little-endian mode.

Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/bitops.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mn10300/include/asm/bitops.h b/arch/mn10300/include/asm/bitops.h
index f49ac49e09ad..3f50e9661076 100644
--- a/arch/mn10300/include/asm/bitops.h
+++ b/arch/mn10300/include/asm/bitops.h
@@ -229,9 +229,9 @@ int ffs(int x)
 #include <asm-generic/bitops/hweight.h>
 
 #define ext2_set_bit_atomic(lock, nr, addr) \
-	test_and_set_bit((nr) ^ 0x18, (addr))
+	test_and_set_bit((nr), (addr))
 #define ext2_clear_bit_atomic(lock, nr, addr) \
-	test_and_clear_bit((nr) ^ 0x18, (addr))
+	test_and_clear_bit((nr), (addr))
 
 #include <asm-generic/bitops/ext2-non-atomic.h>
 #include <asm-generic/bitops/minix-le.h>

From 123d5c0197d8333c3f5cb9572a0c8299dc611233 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 23 Sep 2010 16:15:21 +0100
Subject: [PATCH 515/728] drm/i915/sdvo: Cleanup connector on error path

We weren't unlinking the freed connector from the drm lists, and so
hit some use-after-free if we failed to initialise the connector.

Reported-and-tested-by: Woody Suwalski <terraluna977@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18342
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index e8e902d614ed..60fcef700be6 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2170,8 +2170,7 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type)
         return true;
 
 err:
-	intel_sdvo_destroy_enhance_property(connector);
-	kfree(intel_sdvo_connector);
+	intel_sdvo_destroy(connector);
 	return false;
 }
 
@@ -2243,8 +2242,7 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device)
 	return true;
 
 err:
-	intel_sdvo_destroy_enhance_property(connector);
-	kfree(intel_sdvo_connector);
+	intel_sdvo_destroy(connector);
 	return false;
 }
 

From cf9a2f3afc75d41a61cbc91e725b9ce0746c400a Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 23 Sep 2010 16:17:33 +0100
Subject: [PATCH 516/728] drm/i915/sdvo: Handle unsupported
 GET_SUPPORTED_ENHANCEMENTS gracefully

In the event that the external chipset doesn't implement the
GET_SUPPORTED_ENHANCEMENTS commands, gracefully treat it as having no
enhancments rather than bailing.

Reported-and-tested-by: Woody Suwalski <terraluna977@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18342
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_sdvo.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 60fcef700be6..ee73e428a84a 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -2520,11 +2520,10 @@ static bool intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo,
 		uint16_t response;
 	} enhancements;
 
-	if (!intel_sdvo_get_value(intel_sdvo,
-				  SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
-				  &enhancements, sizeof(enhancements)))
-		return false;
-
+	enhancements.response = 0;
+	intel_sdvo_get_value(intel_sdvo,
+			     SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+			     &enhancements, sizeof(enhancements));
 	if (enhancements.response == 0) {
 		DRM_DEBUG_KMS("No enhancement is supported\n");
 		return true;

From a6ef9c8f1635ccd175be9eb5d36c376ffb8fbc51 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 23 Sep 2010 18:04:28 +0100
Subject: [PATCH 517/728] MN10300: Fix SIGRTMAX

SIGRTMAX should be _NSIG not _NSIG-1.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/include/asm/signal.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mn10300/include/asm/signal.h b/arch/mn10300/include/asm/signal.h
index 7e891fce2370..1865d72a86ff 100644
--- a/arch/mn10300/include/asm/signal.h
+++ b/arch/mn10300/include/asm/signal.h
@@ -78,7 +78,7 @@ typedef unsigned long sigset_t;
 
 /* These should not be considered constants from userland.  */
 #define SIGRTMIN	32
-#define SIGRTMAX	(_NSIG-1)
+#define SIGRTMAX	_NSIG
 
 /*
  * SA_FLAGS values:

From ed3473b18f85b591c1e8afec831e9e06120142b7 Mon Sep 17 00:00:00 2001
From: Mark Salter <msalter@redhat.com>
Date: Thu, 23 Sep 2010 18:04:33 +0100
Subject: [PATCH 518/728] MN10300: Arch doesn't support HAVE_ARCH_TRACEHOOK

Remove specification of HAVE_ARCH_TRACEHOOK for MN10300 as the arch does not
support it at this time.

Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/Kconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index 444b9f918fdf..7c2a2f7f8dc1 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -8,7 +8,6 @@ mainmenu "Linux Kernel Configuration"
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
-	select HAVE_ARCH_TRACEHOOK
 
 config AM33
 	def_bool y

From 58e226c6d44b250641e229b306030da5c84e4341 Mon Sep 17 00:00:00 2001
From: "Lee, Chun-Yi" <joeyli.kernel@gmail.com>
Date: Fri, 10 Sep 2010 08:04:19 +0000
Subject: [PATCH 519/728] Change MSI LAPTOP driver maintainer to Lee, Chun-Yi

Change MSI LAPTOP driver maintainer from Lennart Poettering to Lee, Chun-Yi.

MSI is a Taiwan OEM company, Lee, Chun-Yi can more easy to contact with MSI
and maintain msi-laptop driver.
Thank's for Lennart Poettering's contribute, Lee, Chun-Yi will base on his
article to continue maintain the msi-laptop driver.

Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
 MAINTAINERS | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 4d4881d909da..df342839b8c1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3905,10 +3905,8 @@ F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-M:	Lennart Poettering <mzxreary@0pointer.de>
+M:	Lee, Chun-Yi <jlee@novell.com>
 L:	platform-driver-x86@vger.kernel.org
-W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
-W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 

From fc6e756894b703952fd277a1f98a5d93e7ba847a Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Fri, 17 Sep 2010 21:53:41 -0300
Subject: [PATCH 520/728] thinkpad-acpi: avoid keymap pitfall

Change the code so that it will use the correct size for keymap entries.
Do it in a way that makes it harder to screw it up in the future.

Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com>
Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
---
 drivers/platform/x86/thinkpad_acpi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index e35ed128bdef..2d61186ad5a2 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -3093,7 +3093,8 @@ static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
 	TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
 };
 
-typedef u16 tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
+typedef u16 tpacpi_keymap_entry_t;
+typedef tpacpi_keymap_entry_t tpacpi_keymap_t[TPACPI_HOTKEY_MAP_LEN];
 
 static int __init hotkey_init(struct ibm_init_struct *iibm)
 {
@@ -3230,7 +3231,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	};
 
 #define TPACPI_HOTKEY_MAP_SIZE		sizeof(tpacpi_keymap_t)
-#define TPACPI_HOTKEY_MAP_TYPESIZE	sizeof(tpacpi_keymap_t[0])
+#define TPACPI_HOTKEY_MAP_TYPESIZE	sizeof(tpacpi_keymap_entry_t)
 
 	int res, i;
 	int status;

From cc60f8878eab892c03d06b10f389232b9b66bd83 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Fri, 17 Sep 2010 23:33:51 +0200
Subject: [PATCH 521/728] dmaengine: fix interrupt clearing for mv_xor

When using simultaneously the two DMA channels on a same engine, some
transfers are never completed. For example, an endless lock can occur
while writing heavily on a RAID5 array (with async-tx offload support
enabled).

Note that this issue can also be reproduced by using the DMA test
client.

On a same engine, the interrupt cause register is shared between two
DMA channels. This patch make sure that the cause bit is only cleared
for the requested channel.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Tested-by: Luc Saillard <luc@saillard.org>
Acked-by: saeed bishara <saeed.bishara@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/dma/mv_xor.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 86c5ae9fde34..411d5bf50fc4 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -162,7 +162,7 @@ static int mv_is_err_intr(u32 intr_cause)
 
 static void mv_xor_device_clear_eoc_cause(struct mv_xor_chan *chan)
 {
-	u32 val = (1 << (1 + (chan->idx * 16)));
+	u32 val = ~(1 << (chan->idx * 16));
 	dev_dbg(chan->device->common.dev, "%s, val 0x%08x\n", __func__, val);
 	__raw_writel(val, XOR_INTR_CAUSE(chan));
 }

From 12828061cdacfb1db3eb03fd71952d5ebc555bbb Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Mon, 13 Sep 2010 14:00:23 +0800
Subject: [PATCH 522/728] ocfs2: update ctime when changing the file's
 permission by setfacl

In commit 30e2bab, ext3 fixed it. So change it accordingly in ocfs2.

Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1283760364
# setfacl -m  'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1283760364

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/acl.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index a76e0aa5cd3f..391915093fe1 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -209,7 +209,10 @@ static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head *di_bh,
 	}
 
 	inode->i_mode = new_mode;
+	inode->i_ctime = CURRENT_TIME;
 	di->i_mode = cpu_to_le16(inode->i_mode);
+	di->i_ctime = cpu_to_le64(inode->i_ctime.tv_sec);
+	di->i_ctime_nsec = cpu_to_le32(inode->i_ctime.tv_nsec);
 
 	ocfs2_journal_dirty(handle, di_bh);
 

From 47dea423799d98c53793237ab386a94976f305d5 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Mon, 13 Sep 2010 15:13:50 +0800
Subject: [PATCH 523/728] ocfs2: Use cpu_to_le16 for e_leaf_clusters in
 ocfs2_bg_discontig_add_extent.

e_leaf_clusters is a le16, so use cpu_to_le16 instead
of cpu_to_le32.

What's more, we change 'clusters' to unsigned int to
signify that the size of 'clusters' isn't important here.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/suballoc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index 8a286f54dca1..849c2f0e0a0e 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -357,7 +357,7 @@ out:
 static void ocfs2_bg_discontig_add_extent(struct ocfs2_super *osb,
 					  struct ocfs2_group_desc *bg,
 					  struct ocfs2_chain_list *cl,
-					  u64 p_blkno, u32 clusters)
+					  u64 p_blkno, unsigned int clusters)
 {
 	struct ocfs2_extent_list *el = &bg->bg_list;
 	struct ocfs2_extent_rec *rec;
@@ -369,7 +369,7 @@ static void ocfs2_bg_discontig_add_extent(struct ocfs2_super *osb,
 	rec->e_blkno = cpu_to_le64(p_blkno);
 	rec->e_cpos = cpu_to_le32(le16_to_cpu(bg->bg_bits) /
 				  le16_to_cpu(cl->cl_bpc));
-	rec->e_leaf_clusters = cpu_to_le32(clusters);
+	rec->e_leaf_clusters = cpu_to_le16(clusters);
 	le16_add_cpu(&bg->bg_bits, clusters * le16_to_cpu(cl->cl_bpc));
 	le16_add_cpu(&bg->bg_free_bits_count,
 		     clusters * le16_to_cpu(cl->cl_bpc));

From 4a452de4fdfe4dbb27e491904d8bfaf1262bdff4 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Sun, 19 Sep 2010 13:42:28 +0800
Subject: [PATCH 524/728] ocfs2: Move 'wanted' into parens of
 ocfs2_resmap_resv_bits.

The first time I read the function ocfs2_resmap_resv_bits, I consider
about what 'wanted' will be used and consider about the comments.
Then I find it is only used if the reservation is empty. ;)

So we'd better move it to the parens so that it make the code more
readable, what's more, ocfs2_resmap_resv_bits is used so frequently
and we should save some cpus.

Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/reservations.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/fs/ocfs2/reservations.c b/fs/ocfs2/reservations.c
index d8b6e4259b80..3e78db361bc7 100644
--- a/fs/ocfs2/reservations.c
+++ b/fs/ocfs2/reservations.c
@@ -732,25 +732,23 @@ int ocfs2_resmap_resv_bits(struct ocfs2_reservation_map *resmap,
 			   struct ocfs2_alloc_reservation *resv,
 			   int *cstart, int *clen)
 {
-	unsigned int wanted = *clen;
-
 	if (resv == NULL || ocfs2_resmap_disabled(resmap))
 		return -ENOSPC;
 
 	spin_lock(&resv_lock);
 
-	/*
-	 * We don't want to over-allocate for temporary
-	 * windows. Otherwise, we run the risk of fragmenting the
-	 * allocation space.
-	 */
-	wanted = ocfs2_resv_window_bits(resmap, resv);
-	if ((resv->r_flags & OCFS2_RESV_FLAG_TMP) || wanted < *clen)
-		wanted = *clen;
-
 	if (ocfs2_resv_empty(resv)) {
-		mlog(0, "empty reservation, find new window\n");
+		/*
+		 * We don't want to over-allocate for temporary
+		 * windows. Otherwise, we run the risk of fragmenting the
+		 * allocation space.
+		 */
+		unsigned int wanted = ocfs2_resv_window_bits(resmap, resv);
 
+		if ((resv->r_flags & OCFS2_RESV_FLAG_TMP) || wanted < *clen)
+			wanted = *clen;
+
+		mlog(0, "empty reservation, find new window\n");
 		/*
 		 * Try to get a window here. If it works, we must fall
 		 * through and test the bitmap . This avoids some

From 0000b862027d624ac564609b87c1aa4d14dd1e46 Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Sun, 19 Sep 2010 13:42:29 +0800
Subject: [PATCH 525/728] ocfs2: Sync inode flags with ext2.

We sync our inode flags with ext2 and define them by hex
values. But actually in commit 3669567(4 years ago), all
these values are moved to include/linux/fs.h. So we'd
better also use them as what ext2 did. So sync our inode
flags with ext2 by using FS_*.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/ocfs2_fs.h    | 35 ++++++++++++++++++++++++-----------
 fs/ocfs2/ocfs2_ioctl.h |  8 ++++----
 2 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index 33f1c9a8258d..fa31d05e41b7 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -235,18 +235,31 @@
 #define OCFS2_HAS_REFCOUNT_FL   (0x0010)
 
 /* Inode attributes, keep in sync with EXT2 */
-#define OCFS2_SECRM_FL		(0x00000001)	/* Secure deletion */
-#define OCFS2_UNRM_FL		(0x00000002)	/* Undelete */
-#define OCFS2_COMPR_FL		(0x00000004)	/* Compress file */
-#define OCFS2_SYNC_FL		(0x00000008)	/* Synchronous updates */
-#define OCFS2_IMMUTABLE_FL	(0x00000010)	/* Immutable file */
-#define OCFS2_APPEND_FL		(0x00000020)	/* writes to file may only append */
-#define OCFS2_NODUMP_FL		(0x00000040)	/* do not dump file */
-#define OCFS2_NOATIME_FL	(0x00000080)	/* do not update atime */
-#define OCFS2_DIRSYNC_FL	(0x00010000)	/* dirsync behaviour (directories only) */
+#define OCFS2_SECRM_FL			FS_SECRM_FL	/* Secure deletion */
+#define OCFS2_UNRM_FL			FS_UNRM_FL	/* Undelete */
+#define OCFS2_COMPR_FL			FS_COMPR_FL	/* Compress file */
+#define OCFS2_SYNC_FL			FS_SYNC_FL	/* Synchronous updates */
+#define OCFS2_IMMUTABLE_FL		FS_IMMUTABLE_FL	/* Immutable file */
+#define OCFS2_APPEND_FL			FS_APPEND_FL	/* writes to file may only append */
+#define OCFS2_NODUMP_FL			FS_NODUMP_FL	/* do not dump file */
+#define OCFS2_NOATIME_FL		FS_NOATIME_FL	/* do not update atime */
+/* Reserved for compression usage... */
+#define OCFS2_DIRTY_FL			FS_DIRTY_FL
+#define OCFS2_COMPRBLK_FL		FS_COMPRBLK_FL	/* One or more compressed clusters */
+#define OCFS2_NOCOMP_FL			FS_NOCOMP_FL	/* Don't compress */
+#define OCFS2_ECOMPR_FL			FS_ECOMPR_FL	/* Compression error */
+/* End compression flags --- maybe not all used */
+#define OCFS2_BTREE_FL			FS_BTREE_FL	/* btree format dir */
+#define OCFS2_INDEX_FL			FS_INDEX_FL	/* hash-indexed directory */
+#define OCFS2_IMAGIC_FL			FS_IMAGIC_FL	/* AFS directory */
+#define OCFS2_JOURNAL_DATA_FL		FS_JOURNAL_DATA_FL /* Reserved for ext3 */
+#define OCFS2_NOTAIL_FL			FS_NOTAIL_FL	/* file tail should not be merged */
+#define OCFS2_DIRSYNC_FL		FS_DIRSYNC_FL	/* dirsync behaviour (directories only) */
+#define OCFS2_TOPDIR_FL			FS_TOPDIR_FL	/* Top of directory hierarchies*/
+#define OCFS2_RESERVED_FL		FS_RESERVED_FL	/* reserved for ext2 lib */
 
-#define OCFS2_FL_VISIBLE	(0x000100FF)	/* User visible flags */
-#define OCFS2_FL_MODIFIABLE	(0x000100FF)	/* User modifiable flags */
+#define OCFS2_FL_VISIBLE		FS_FL_USER_VISIBLE	/* User visible flags */
+#define OCFS2_FL_MODIFIABLE		FS_FL_USER_MODIFIABLE	/* User modifiable flags */
 
 /*
  * Extent record flags (e_node.leaf.flags)
diff --git a/fs/ocfs2/ocfs2_ioctl.h b/fs/ocfs2/ocfs2_ioctl.h
index 2d3420af1a83..5d241505690b 100644
--- a/fs/ocfs2/ocfs2_ioctl.h
+++ b/fs/ocfs2/ocfs2_ioctl.h
@@ -23,10 +23,10 @@
 /*
  * ioctl commands
  */
-#define OCFS2_IOC_GETFLAGS	_IOR('f', 1, long)
-#define OCFS2_IOC_SETFLAGS	_IOW('f', 2, long)
-#define OCFS2_IOC32_GETFLAGS	_IOR('f', 1, int)
-#define OCFS2_IOC32_SETFLAGS	_IOW('f', 2, int)
+#define OCFS2_IOC_GETFLAGS	FS_IOC_GETFLAGS
+#define OCFS2_IOC_SETFLAGS	FS_IOC_SETFLAGS
+#define OCFS2_IOC32_GETFLAGS	FS_IOC32_GETFLAGS
+#define OCFS2_IOC32_SETFLAGS	FS_IOC32_SETFLAGS
 
 /*
  * Space reservation / allocation / free ioctls and argument structure

From 5dad6c39d156fbbde0b0ef170d9173feffdeb546 Mon Sep 17 00:00:00 2001
From: Srinivas Eeda <srinivas.eeda@oracle.com>
Date: Tue, 21 Sep 2010 16:27:26 -0700
Subject: [PATCH 526/728] o2dlm: force free mles during dlm exit

While umounting, a block mle doesn't get freed if dlm is shutdown after
master request is received but before assert master. This results in unclean
shutdown of dlm domain.

This patch frees all mles that lie around after other nodes were notified about
exiting the dlm and marking dlm state as leaving. Only block mles are expected
to be around, so we log ERROR for other mles but still free them.

Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
---
 fs/ocfs2/dlm/dlmcommon.h |  1 +
 fs/ocfs2/dlm/dlmdomain.c |  1 +
 fs/ocfs2/dlm/dlmmaster.c | 40 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 42 insertions(+)

diff --git a/fs/ocfs2/dlm/dlmcommon.h b/fs/ocfs2/dlm/dlmcommon.h
index 4b6ae2c13b47..765298908f1d 100644
--- a/fs/ocfs2/dlm/dlmcommon.h
+++ b/fs/ocfs2/dlm/dlmcommon.h
@@ -1030,6 +1030,7 @@ int dlm_drop_lockres_ref(struct dlm_ctxt *dlm,
 			 struct dlm_lock_resource *res);
 void dlm_clean_master_list(struct dlm_ctxt *dlm,
 			   u8 dead_node);
+void dlm_force_free_mles(struct dlm_ctxt *dlm);
 int dlm_lock_basts_flushed(struct dlm_ctxt *dlm, struct dlm_lock *lock);
 int __dlm_lockres_has_locks(struct dlm_lock_resource *res);
 int __dlm_lockres_unused(struct dlm_lock_resource *res);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 153abb5abef0..11a5c87fd7f7 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -693,6 +693,7 @@ void dlm_unregister_domain(struct dlm_ctxt *dlm)
 
 		dlm_mark_domain_leaving(dlm);
 		dlm_leave_domain(dlm);
+		dlm_force_free_mles(dlm);
 		dlm_complete_dlm_shutdown(dlm);
 	}
 	dlm_put(dlm);
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index ffb4c68dafa4..f564b0e5f80d 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -3433,3 +3433,43 @@ void dlm_lockres_release_ast(struct dlm_ctxt *dlm,
 	wake_up(&res->wq);
 	wake_up(&dlm->migration_wq);
 }
+
+void dlm_force_free_mles(struct dlm_ctxt *dlm)
+{
+	int i;
+	struct hlist_head *bucket;
+	struct dlm_master_list_entry *mle;
+	struct hlist_node *tmp, *list;
+
+	/*
+	 * We notified all other nodes that we are exiting the domain and
+	 * marked the dlm state to DLM_CTXT_LEAVING. If any mles are still
+	 * around we force free them and wake any processes that are waiting
+	 * on the mles
+	 */
+	spin_lock(&dlm->spinlock);
+	spin_lock(&dlm->master_lock);
+
+	BUG_ON(dlm->dlm_state != DLM_CTXT_LEAVING);
+	BUG_ON((find_next_bit(dlm->domain_map, O2NM_MAX_NODES, 0) < O2NM_MAX_NODES));
+
+	for (i = 0; i < DLM_HASH_BUCKETS; i++) {
+		bucket = dlm_master_hash(dlm, i);
+		hlist_for_each_safe(list, tmp, bucket) {
+			mle = hlist_entry(list, struct dlm_master_list_entry,
+					  master_hash_node);
+			if (mle->type != DLM_MLE_BLOCK) {
+				mlog(ML_ERROR, "bad mle: %p\n", mle);
+				dlm_print_one_mle(mle);
+			}
+			atomic_set(&mle->woken, 1);
+			wake_up(&mle->wq);
+
+			__dlm_unlink_mle(dlm, mle);
+			__dlm_mle_detach_hb_events(dlm, mle);
+			__dlm_put_mle(mle);
+		}
+	}
+	spin_unlock(&dlm->master_lock);
+	spin_unlock(&dlm->spinlock);
+}

From a5d60827a6bf9e7345f9e50423c1673ec4e14568 Mon Sep 17 00:00:00 2001
From: Ben Skeggs <bskeggs@redhat.com>
Date: Thu, 23 Sep 2010 16:44:01 +1000
Subject: [PATCH 527/728] drm/nouveau: fix panels using straps-based mode
 detection

nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant
entries.  This nukes the mode id initialised by drm_mode_create(), and
causes warnings from idr when we try to remove the mode.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/nouveau/nouveau_connector.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 87186a4bbf03..fc737037f751 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -558,8 +558,10 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 	if (nv_encoder->dcb->type == OUTPUT_LVDS &&
 	    (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
 	     dev_priv->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) {
-		nv_connector->native_mode = drm_mode_create(dev);
-		nouveau_bios_fp_mode(dev, nv_connector->native_mode);
+		struct drm_display_mode mode;
+
+		nouveau_bios_fp_mode(dev, &mode);
+		nv_connector->native_mode = drm_mode_duplicate(dev, &mode);
 	}
 
 	/* Find the native mode if this is a digital panel, if we didn't

From 0e57a3cc71884ef38e0568b63e004e2c782ea6d2 Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Wed, 22 Sep 2010 17:45:45 +0100
Subject: [PATCH 528/728] drm: ttm sparse fixes.

Correct allocation flags type and function prototype for ANSI C compliance.

[airlied: whitespace fixed]

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/ttm/ttm_page_alloc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_page_alloc.c b/drivers/gpu/drm/ttm/ttm_page_alloc.c
index ca904799f018..b1e02fffd3cc 100644
--- a/drivers/gpu/drm/ttm/ttm_page_alloc.c
+++ b/drivers/gpu/drm/ttm/ttm_page_alloc.c
@@ -69,7 +69,7 @@ struct ttm_page_pool {
 	spinlock_t		lock;
 	bool			fill_lock;
 	struct list_head	list;
-	int			gfp_flags;
+	gfp_t			gfp_flags;
 	unsigned		npages;
 	char			*name;
 	unsigned long		nfrees;
@@ -475,7 +475,7 @@ static void ttm_handle_caching_state_failure(struct list_head *pages,
  * This function is reentrant if caller updates count depending on number of
  * pages returned in pages array.
  */
-static int ttm_alloc_new_pages(struct list_head *pages, int gfp_flags,
+static int ttm_alloc_new_pages(struct list_head *pages, gfp_t gfp_flags,
 		int ttm_flags, enum ttm_caching_state cstate, unsigned count)
 {
 	struct page **caching_array;
@@ -666,7 +666,7 @@ int ttm_get_pages(struct list_head *pages, int flags,
 {
 	struct ttm_page_pool *pool = ttm_get_pool(flags, cstate);
 	struct page *p = NULL;
-	int gfp_flags = GFP_USER;
+	gfp_t gfp_flags = GFP_USER;
 	int r;
 
 	/* set zero flag for page allocation if required */
@@ -818,7 +818,7 @@ int ttm_page_alloc_init(struct ttm_mem_global *glob, unsigned max_pages)
 	return 0;
 }
 
-void ttm_page_alloc_fini()
+void ttm_page_alloc_fini(void)
 {
 	int i;
 

From d3147e86d71e74c93d361988d9441575da71345e Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Fri, 24 Sep 2010 10:10:23 +1000
Subject: [PATCH 529/728] drm: fix trivial coding errors

Correct function storage class, and correct assignment type.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_buffer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_buffer.c b/drivers/gpu/drm/drm_buffer.c
index 55d03ed05000..529a0dbe9fc6 100644
--- a/drivers/gpu/drm/drm_buffer.c
+++ b/drivers/gpu/drm/drm_buffer.c
@@ -98,8 +98,8 @@ EXPORT_SYMBOL(drm_buffer_alloc);
  *   user_data: A pointer the data that is copied to the buffer.
  *   size: The Number of bytes to copy.
  */
-extern int drm_buffer_copy_from_user(struct drm_buffer *buf,
-		void __user *user_data, int size)
+int drm_buffer_copy_from_user(struct drm_buffer *buf,
+			      void __user *user_data, int size)
 {
 	int nr_pages = size / PAGE_SIZE + 1;
 	int idx;
@@ -163,7 +163,7 @@ void *drm_buffer_read_object(struct drm_buffer *buf,
 {
 	int idx = drm_buffer_index(buf);
 	int page = drm_buffer_page(buf);
-	void *obj = 0;
+	void *obj = NULL;
 
 	if (idx + objsize <= PAGE_SIZE) {
 		obj = &buf->data[page][idx];

From 4417d7f60218d838158f1f85eab5e9ca8d1aa92e Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Wed, 22 Sep 2010 17:57:19 +0100
Subject: [PATCH 530/728] drm: radeon cleanup fixes...

Fix string interpreted as trigraph and typo.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/atombios.h | 2 +-
 drivers/gpu/drm/radeon/r600.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 1bc72c3190a9..fe359a239df3 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -4999,7 +4999,7 @@ typedef struct _SW_I2C_IO_DATA_PARAMETERS
 #define SW_I2C_CNTL_WRITE1BIT 6
 
 //==============================VESA definition Portion===============================
-#define VESA_OEM_PRODUCT_REV			            '01.00'
+#define VESA_OEM_PRODUCT_REV			            "01.00"
 #define VESA_MODE_ATTRIBUTE_MODE_SUPPORT	     0xBB	//refer to VBE spec p.32, no TTY support
 #define VESA_MODE_WIN_ATTRIBUTE						     7
 #define VESA_WIN_SIZE											     64
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index afc18d87fdca..ddc3adea1dda 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2729,7 +2729,7 @@ int r600_ib_test(struct radeon_device *rdev)
 	if (i < rdev->usec_timeout) {
 		DRM_INFO("ib test succeeded in %u usecs\n", i);
 	} else {
-		DRM_ERROR("radeon: ib test failed (sracth(0x%04X)=0x%08X)\n",
+		DRM_ERROR("radeon: ib test failed (scratch(0x%04X)=0x%08X)\n",
 			  scratch, tmp);
 		r = -EINVAL;
 	}

From 201ba4c43214c6c386cff66b33efb612b6260ba2 Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Wed, 22 Sep 2010 18:05:35 +0100
Subject: [PATCH 531/728] vgaarb: trivial fix

Correct function being needlessly visible outside compilation unit
when the only users are internal.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/vga/vgaarb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index b87569e96b16..f366f968155a 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -598,7 +598,7 @@ static inline void vga_update_device_decodes(struct vga_device *vgadev,
 	pr_debug("vgaarb: decoding count now is: %d\n", vga_decode_count);
 }
 
-void __vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes, bool userspace)
+static void __vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes, bool userspace)
 {
 	struct vga_device *vgadev;
 	unsigned long flags;

From 433abed6c6f76ca079a9564f2a1a51fd28ebe0ca Mon Sep 17 00:00:00 2001
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Date: Fri, 10 Sep 2010 13:23:03 +0900
Subject: [PATCH 532/728] hugetlb, rmap: always use anon_vma root pointer

This patch applies Andrea's fix given by the following patch into hugepage
rmapping code:

  commit 288468c334e98aacbb7e2fb8bde6bc1adcd55e05
  Author: Andrea Arcangeli <aarcange@redhat.com>
  Date:   Mon Aug 9 17:19:09 2010 -0700

This patch uses anon_vma->root and avoids unnecessary overwriting when
anon_vma is already set up.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/rmap.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/mm/rmap.c b/mm/rmap.c
index f6f0d2dda2ea..2854857fd63b 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1564,13 +1564,14 @@ static void __hugepage_set_anon_rmap(struct page *page,
 	struct vm_area_struct *vma, unsigned long address, int exclusive)
 {
 	struct anon_vma *anon_vma = vma->anon_vma;
+
 	BUG_ON(!anon_vma);
-	if (!exclusive) {
-		struct anon_vma_chain *avc;
-		avc = list_entry(vma->anon_vma_chain.prev,
-				 struct anon_vma_chain, same_vma);
-		anon_vma = avc->anon_vma;
-	}
+
+	if (PageAnon(page))
+		return;
+	if (!exclusive)
+		anon_vma = anon_vma->root;
+
 	anon_vma = (void *) anon_vma + PAGE_MAPPING_ANON;
 	page->mapping = (struct address_space *) anon_vma;
 	page->index = linear_page_index(vma, address);

From cd67f0d2a9a6b5b9f79f4343dc8805757d9ebae2 Mon Sep 17 00:00:00 2001
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Date: Fri, 10 Sep 2010 13:23:04 +0900
Subject: [PATCH 533/728] hugetlb, rmap: use hugepage_add_new_anon_rmap() in
 hugetlb_cow()

Obviously, setting anon_vma for COWed hugepage should be done
by hugepage_add_new_anon_rmap() to scan vmas faster.
This patch fixes it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index cc5be788a39f..9519f3f6c1da 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2404,7 +2404,7 @@ retry_avoidcopy:
 		set_huge_pte_at(mm, address, ptep,
 				make_huge_pte(vma, new_page, 1));
 		page_remove_rmap(old_page);
-		hugepage_add_anon_rmap(new_page, vma, address);
+		hugepage_add_new_anon_rmap(new_page, vma, address);
 		/* Make the old page be freed below */
 		new_page = old_page;
 		mmu_notifier_invalidate_range_end(mm,

From 56c9cfb13c9b6516017eea4e8cbe22ea02e07ee6 Mon Sep 17 00:00:00 2001
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Date: Fri, 10 Sep 2010 13:23:04 +0900
Subject: [PATCH 534/728] hugetlb, rmap: fix confusing page locking in
 hugetlb_cow()

The "if (!trylock_page)" block in the avoidcopy path of hugetlb_cow()
looks confusing and is buggy.  Originally this trylock_page() was
intended to make sure that old_page is locked even when old_page !=
pagecache_page, because then only pagecache_page is locked.

This patch fixes it by moving page locking into hugetlb_fault().

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/hugetlb.c | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 9519f3f6c1da..c03273807182 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2324,11 +2324,8 @@ retry_avoidcopy:
 	 * and just make the page writable */
 	avoidcopy = (page_mapcount(old_page) == 1);
 	if (avoidcopy) {
-		if (!trylock_page(old_page)) {
-			if (PageAnon(old_page))
-				page_move_anon_rmap(old_page, vma, address);
-		} else
-			unlock_page(old_page);
+		if (PageAnon(old_page))
+			page_move_anon_rmap(old_page, vma, address);
 		set_huge_ptep_writable(vma, address, ptep);
 		return 0;
 	}
@@ -2631,10 +2628,16 @@ int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma,
 								vma, address);
 	}
 
-	if (!pagecache_page) {
-		page = pte_page(entry);
+	/*
+	 * hugetlb_cow() requires page locks of pte_page(entry) and
+	 * pagecache_page, so here we need take the former one
+	 * when page != pagecache_page or !pagecache_page.
+	 * Note that locking order is always pagecache_page -> page,
+	 * so no worry about deadlock.
+	 */
+	page = pte_page(entry);
+	if (page != pagecache_page)
 		lock_page(page);
-	}
 
 	spin_lock(&mm->page_table_lock);
 	/* Check for a racing update before calling hugetlb_cow */
@@ -2661,9 +2664,8 @@ out_page_table_lock:
 	if (pagecache_page) {
 		unlock_page(pagecache_page);
 		put_page(pagecache_page);
-	} else {
-		unlock_page(page);
 	}
+	unlock_page(page);
 
 out_mutex:
 	mutex_unlock(&hugetlb_instantiation_mutex);

From a850ea30374ebed32a0724742601861853fde869 Mon Sep 17 00:00:00 2001
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Date: Fri, 10 Sep 2010 13:23:06 +0900
Subject: [PATCH 535/728] hugetlb, rmap: add BUG_ON(!PageLocked) in
 hugetlb_add_anon_rmap()

Confirming page lock is held in hugetlb_add_anon_rmap() may be useful
to detect possible future problems.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/rmap.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/mm/rmap.c b/mm/rmap.c
index 2854857fd63b..9d2ba01bd4f9 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1582,6 +1582,8 @@ void hugepage_add_anon_rmap(struct page *page,
 {
 	struct anon_vma *anon_vma = vma->anon_vma;
 	int first;
+
+	BUG_ON(!PageLocked(page));
 	BUG_ON(!anon_vma);
 	BUG_ON(address < vma->vm_start || address >= vma->vm_end);
 	first = atomic_inc_and_test(&page->_mapcount);

From cb922d2596593bac0bf0597eb305cc9bc136cec5 Mon Sep 17 00:00:00 2001
From: Scott Ellis <scott@jumpnowtek.com>
Date: Thu, 23 Sep 2010 18:47:23 -0700
Subject: [PATCH 536/728] omap: McBSP: tx_irq_completion used in rx_irq_handler

Looks like a typo from commit d6d834b010.

Signed-off-by: Scott Ellis <scott@jumpnowtek.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/mcbsp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e31496e35b0f..0c8612fd8312 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -156,7 +156,7 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 		/* Writing zero to RSYNC_ERR clears the IRQ */
 		MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1));
 	} else {
-		complete(&mcbsp_rx->tx_irq_completion);
+		complete(&mcbsp_rx->rx_irq_completion);
 	}
 
 	return IRQ_HANDLED;

From 01fdf1801e349302fce5d9865470a7100a2d9b74 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 24 Sep 2010 09:09:42 +0200
Subject: [PATCH 537/728] ALSA: hda - Fix auto-parse of SPDIF input of Realtek
 codecs

The SPDIF in audio widget must be searched through the list as the widget
that contains the given pin as the connection source.  The current code
was implemented in a reverse way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index a1312a6c8af2..a432e6efd19b 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1594,12 +1594,22 @@ static void alc_auto_parse_digital(struct hda_codec *codec)
 	}
 
 	if (spec->autocfg.dig_in_pin) {
-		hda_nid_t dig_nid;
-		err = snd_hda_get_connections(codec,
-					      spec->autocfg.dig_in_pin,
-					      &dig_nid, 1);
-		if (err > 0)
-			spec->dig_in_nid = dig_nid;
+		dig_nid = codec->start_nid;
+		for (i = 0; i < codec->num_nodes; i++, dig_nid++) {
+			unsigned int wcaps = get_wcaps(codec, dig_nid);
+			if (get_wcaps_type(wcaps) != AC_WID_AUD_IN)
+				continue;
+			if (!(wcaps & AC_WCAP_DIGITAL))
+				continue;
+			if (!(wcaps & AC_WCAP_CONN_LIST))
+				continue;
+			err = get_connection_index(codec, dig_nid,
+						   spec->autocfg.dig_in_pin);
+			if (err >= 0) {
+				spec->dig_in_nid = dig_nid;
+				break;
+			}
+		}
 	}
 }
 

From 63e6be6d98e1a2bcdca86872b67052e51ab6afa1 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 15 Sep 2010 18:20:34 +0200
Subject: [PATCH 538/728] perf, x86: Catch spurious interrupts after disabling
 counters

Some cpus still deliver spurious interrupts after disabling a
counter. This caused 'undelivered NMI' messages. This patch
fixes this. Introduced by:

  4177c42: perf, x86: Try to handle unknown nmis with an enabled PMU

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: gorcunov@gmail.com <gorcunov@gmail.com>
Cc: fweisbec@gmail.com <fweisbec@gmail.com>
Cc: ying.huang@intel.com <ying.huang@intel.com>
Cc: ming.m.lin@intel.com <ming.m.lin@intel.com>
Cc: yinghai@kernel.org <yinghai@kernel.org>
Cc: andi@firstfloor.org <andi@firstfloor.org>
Cc: eranian@google.com <eranian@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20100915162034.GO13563@erda.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index 3efdf2870a35..03a5b0385ad6 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -102,6 +102,7 @@ struct cpu_hw_events {
 	 */
 	struct perf_event	*events[X86_PMC_IDX_MAX]; /* in counter order */
 	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
+	unsigned long		running[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
 	int			enabled;
 
 	int			n_events;
@@ -1010,6 +1011,7 @@ static int x86_pmu_start(struct perf_event *event)
 	x86_perf_event_set_period(event);
 	cpuc->events[idx] = event;
 	__set_bit(idx, cpuc->active_mask);
+	__set_bit(idx, cpuc->running);
 	x86_pmu.enable(event);
 	perf_event_update_userpage(event);
 
@@ -1141,8 +1143,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
-		if (!test_bit(idx, cpuc->active_mask))
+		if (!test_bit(idx, cpuc->active_mask)) {
+			/*
+			 * Though we deactivated the counter some cpus
+			 * might still deliver spurious interrupts still
+			 * in flight. Catch them:
+			 */
+			if (__test_and_clear_bit(idx, cpuc->running))
+				handled++;
 			continue;
+		}
 
 		event = cpuc->events[idx];
 		hwc = &event->hw;

From d3654cd29e676cd3a2622aec926b0b56fa444714 Mon Sep 17 00:00:00 2001
From: Pavan Savoy <pavan_savoy@ti.com>
Date: Thu, 19 Aug 2010 14:08:51 -0400
Subject: [PATCH 539/728] Staging: ti-st: remove st_get_plat_device

In order to support multiple ST platform devices, a new symbol
'st_get_plat_device' earlier needed to be exported by the arch/XX/brd-XX.c
file which intends to add the ST platform device.

On removing this dependency, now inside ST driver maintain the array of
ST platform devices that would be registered.
As of now let id=0, as and when we end up having such platforms
where mutliple ST devices can exist, id would come from
protocol drivers (BT, FM and GPS) as to on which platform device
they want to register to.

Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Anca Emanuel <anca.emanuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/staging/ti-st/st.h      |  1 -
 drivers/staging/ti-st/st_core.c |  9 ++++-----
 drivers/staging/ti-st/st_core.h |  2 +-
 drivers/staging/ti-st/st_kim.c  | 22 +++++++++++++++++++---
 4 files changed, 24 insertions(+), 10 deletions(-)

diff --git a/drivers/staging/ti-st/st.h b/drivers/staging/ti-st/st.h
index 9952579425b9..1b3060eb2921 100644
--- a/drivers/staging/ti-st/st.h
+++ b/drivers/staging/ti-st/st.h
@@ -80,5 +80,4 @@ struct st_proto_s {
 extern long st_register(struct st_proto_s *);
 extern long st_unregister(enum proto_type);
 
-extern struct platform_device *st_get_plat_device(void);
 #endif /* ST_H */
diff --git a/drivers/staging/ti-st/st_core.c b/drivers/staging/ti-st/st_core.c
index 063c9b1db1ab..b85d8bfdf600 100644
--- a/drivers/staging/ti-st/st_core.c
+++ b/drivers/staging/ti-st/st_core.c
@@ -38,7 +38,6 @@
 #include "st_ll.h"
 #include "st.h"
 
-#define VERBOSE
 /* strings to be used for rfkill entries and by
  * ST Core to be used for sysfs debug entry
  */
@@ -581,7 +580,7 @@ long st_register(struct st_proto_s *new_proto)
 	long err = 0;
 	unsigned long flags = 0;
 
-	st_kim_ref(&st_gdata);
+	st_kim_ref(&st_gdata, 0);
 	pr_info("%s(%d) ", __func__, new_proto->type);
 	if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
 	    || new_proto->reg_complete_cb == NULL) {
@@ -713,7 +712,7 @@ long st_unregister(enum proto_type type)
 
 	pr_debug("%s: %d ", __func__, type);
 
-	st_kim_ref(&st_gdata);
+	st_kim_ref(&st_gdata, 0);
 	if (type < ST_BT || type >= ST_MAX) {
 		pr_err(" protocol %d not supported", type);
 		return -EPROTONOSUPPORT;
@@ -767,7 +766,7 @@ long st_write(struct sk_buff *skb)
 #endif
 	long len;
 
-	st_kim_ref(&st_gdata);
+	st_kim_ref(&st_gdata, 0);
 	if (unlikely(skb == NULL || st_gdata == NULL
 		|| st_gdata->tty == NULL)) {
 		pr_err("data/tty unavailable to perform write");
@@ -818,7 +817,7 @@ static int st_tty_open(struct tty_struct *tty)
 	struct st_data_s *st_gdata;
 	pr_info("%s ", __func__);
 
-	st_kim_ref(&st_gdata);
+	st_kim_ref(&st_gdata, 0);
 	st_gdata->tty = tty;
 	tty->disc_data = st_gdata;
 
diff --git a/drivers/staging/ti-st/st_core.h b/drivers/staging/ti-st/st_core.h
index e0c32d149f5f..8601320a679e 100644
--- a/drivers/staging/ti-st/st_core.h
+++ b/drivers/staging/ti-st/st_core.h
@@ -117,7 +117,7 @@ int st_core_init(struct st_data_s **);
 void st_core_exit(struct st_data_s *);
 
 /* ask for reference from KIM */
-void st_kim_ref(struct st_data_s **);
+void st_kim_ref(struct st_data_s **, int);
 
 #define GPS_STUB_TEST
 #ifdef GPS_STUB_TEST
diff --git a/drivers/staging/ti-st/st_kim.c b/drivers/staging/ti-st/st_kim.c
index b4a6c7fdc4e6..9e99463f76e8 100644
--- a/drivers/staging/ti-st/st_kim.c
+++ b/drivers/staging/ti-st/st_kim.c
@@ -72,10 +72,25 @@ const unsigned char *protocol_names[] = {
 	PROTO_ENTRY(ST_GPS, "GPS"),
 };
 
+#define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
+struct platform_device *st_kim_devices[MAX_ST_DEVICES];
 
 /**********************************************************************/
 /* internal functions */
 
+/**
+ * st_get_plat_device -
+ *	function which returns the reference to the platform device
+ *	requested by id. As of now only 1 such device exists (id=0)
+ *	the context requesting for reference can get the id to be
+ *	requested by a. The protocol driver which is registering or
+ *	b. the tty device which is opened.
+ */
+static struct platform_device *st_get_plat_device(int id)
+{
+	return st_kim_devices[id];
+}
+
 /**
  * validate_firmware_response -
  *	function to return whether the firmware response was proper
@@ -353,7 +368,7 @@ void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
 	struct kim_data_s	*kim_gdata;
 	pr_info(" %s ", __func__);
 
-	kim_pdev = st_get_plat_device();
+	kim_pdev = st_get_plat_device(0);
 	kim_gdata = dev_get_drvdata(&kim_pdev->dev);
 
 	if (kim_gdata->gpios[type] == -1) {
@@ -574,12 +589,12 @@ static int kim_toggle_radio(void *data, bool blocked)
  *	This would enable multiple such platform devices to exist
  *	on a given platform
  */
-void st_kim_ref(struct st_data_s **core_data)
+void st_kim_ref(struct st_data_s **core_data, int id)
 {
 	struct platform_device	*pdev;
 	struct kim_data_s	*kim_gdata;
 	/* get kim_gdata reference from platform device */
-	pdev = st_get_plat_device();
+	pdev = st_get_plat_device(id);
 	kim_gdata = dev_get_drvdata(&pdev->dev);
 	*core_data = kim_gdata->core_data;
 }
@@ -623,6 +638,7 @@ static int kim_probe(struct platform_device *pdev)
 	long *gpios = pdev->dev.platform_data;
 	struct kim_data_s	*kim_gdata;
 
+	st_kim_devices[pdev->id] = pdev;
 	kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
 	if (!kim_gdata) {
 		pr_err("no mem to allocate");

From 0026e00523a85b90a92a93ddf6660939ecef3e54 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 21 Sep 2010 15:01:53 -0400
Subject: [PATCH 540/728] USB: fix bug in initialization of interface minor
 numbers

Recent changes in the usbhid layer exposed a bug in usbcore.  If
CONFIG_USB_DYNAMIC_MINORS is enabled then an interface may be assigned
a minor number of 0.  However interfaces that aren't registered as USB
class devices also have their minor number set to 0, during
initialization.  As a result usb_find_interface() may return the
wrong interface, leading to a crash.

This patch (as1418) fixes the problem by initializing every
interface's minor number to -1.  It also cleans up the
usb_register_dev() function, which besides being somewhat awkwardly
written, does not unwind completely on all its error paths.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Philip J. Turmel <philip@turmel.org>
Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Tested-by: Matthias Bayer <jackdachef@gmail.com>
CC: Jiri Kosina <jkosina@suse.cz>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/file.c    | 35 ++++++++++++++++-------------------
 drivers/usb/core/message.c |  1 +
 2 files changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index f06f5dbc8cdc..1e6ccef2cf0c 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -159,9 +159,9 @@ void usb_major_cleanup(void)
 int usb_register_dev(struct usb_interface *intf,
 		     struct usb_class_driver *class_driver)
 {
-	int retval = -EINVAL;
+	int retval;
 	int minor_base = class_driver->minor_base;
-	int minor = 0;
+	int minor;
 	char name[20];
 	char *temp;
 
@@ -173,12 +173,17 @@ int usb_register_dev(struct usb_interface *intf,
 	 */
 	minor_base = 0;
 #endif
-	intf->minor = -1;
-
-	dbg ("looking for a minor, starting at %d", minor_base);
 
 	if (class_driver->fops == NULL)
-		goto exit;
+		return -EINVAL;
+	if (intf->minor >= 0)
+		return -EADDRINUSE;
+
+	retval = init_usb_class();
+	if (retval)
+		return retval;
+
+	dev_dbg(&intf->dev, "looking for a minor, starting at %d", minor_base);
 
 	down_write(&minor_rwsem);
 	for (minor = minor_base; minor < MAX_USB_MINORS; ++minor) {
@@ -186,20 +191,12 @@ int usb_register_dev(struct usb_interface *intf,
 			continue;
 
 		usb_minors[minor] = class_driver->fops;
-
-		retval = 0;
+		intf->minor = minor;
 		break;
 	}
 	up_write(&minor_rwsem);
-
-	if (retval)
-		goto exit;
-
-	retval = init_usb_class();
-	if (retval)
-		goto exit;
-
-	intf->minor = minor;
+	if (intf->minor < 0)
+		return -EXFULL;
 
 	/* create a usb class device for this usb interface */
 	snprintf(name, sizeof(name), class_driver->name, minor - minor_base);
@@ -213,11 +210,11 @@ int usb_register_dev(struct usb_interface *intf,
 				      "%s", temp);
 	if (IS_ERR(intf->usb_dev)) {
 		down_write(&minor_rwsem);
-		usb_minors[intf->minor] = NULL;
+		usb_minors[minor] = NULL;
+		intf->minor = -1;
 		up_write(&minor_rwsem);
 		retval = PTR_ERR(intf->usb_dev);
 	}
-exit:
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_register_dev);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 844683e50383..9f0ce7de0e36 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1802,6 +1802,7 @@ free_interfaces:
 		intf->dev.groups = usb_interface_groups;
 		intf->dev.dma_mask = dev->dev.dma_mask;
 		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
+		intf->minor = -1;
 		device_initialize(&intf->dev);
 		dev_set_name(&intf->dev, "%d-%s:%d.%d",
 			dev->bus->busnum, dev->devpath,

From bd2e74d657fc7d514881cc2117e323790b257914 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 20 Sep 2010 10:32:01 +0300
Subject: [PATCH 541/728] usb: musb: gadget: fix kernel panic if using out ep
 with FIFO_TXRX style

For shared fifo hw endpoint(with FIFO_TXRX style), only ep_in
field of musb_hw_ep is intialized in musb_g_init_endpoints, and
ep_out is not initialized, but musb_g_rx and rxstate may access
ep_out field of musb_hw_ep by the method below:

	musb_ep = &musb->endpoints[epnum].ep_out

which can cause the kernel panic[1] below, this patch fixes the issue
by getting 'musb_ep' from '&musb->endpoints[epnum].ep_in' for shared fifo
endpoint.

[1], kernel panic
[root@OMAP3EVM /]# musb_interrupt 1583: ** IRQ peripheral usb0008 tx0000 rx4000
musb_stage0_irq 460: <== Power=f0, DevCtl=99, int_usb=0x8
musb_g_rx 772: <== (null), rxcsr 4007 ffffffe8
musb_g_rx 786:  iso overrun on ffffffe8
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = c0004000
[00000008] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT
last sysfs file: /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1/dev
Modules linked in: g_zero
CPU: 0    Tainted: G        W    (2.6.35-rc6-gkh-wl+ #92)
PC is at musb_g_rx+0xfc/0x2ec
LR is at vprintk+0x3f4/0x458
pc : [<c02c07a4>]    lr : [<c006ccb0>]    psr: 20000193
sp : c760bd78  ip : c03c9d70  fp : c760bdbc
r10: 00000000  r9 : fa0ab1e0  r8 : 0000000e
r7 : c7e80158  r6 : ffffffe8  r5 : 00000001  r4 : 00004003
r3 : 00010003  r2 : c760bcd8  r1 : c03cd030  r0 : 0000002e
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 8778c019  DAC: 00000017
Process kmemleak (pid: 421, stack limit = 0xc760a2e8)
Stack: (0xc760bd78 to 0xc760c000)
bd60:                                                       ffffffe8 c04b1b58
bd80: ffffffe8 c7c01ac0 00000000 c7e80d24 c0084238 00000001 00000001 c7e80158
bda0: 0000000e 00000008 00000099 000000f0 c760be04 c760bdc0 c02bcd68 c02c06b4
bdc0: 00000099 00000008 00004000 c760bdd8 c03cc4f8 00000000 00000002 c7e80158
bde0: c7d2e300 60000193 c760a000 0000005c 00000000 00000000 c760be24 c760be08
be00: c02bcecc c02bc1ac c7d2e300 c7d2e300 0000005c c760a000 c760be54 c760be28
be20: c00ad698 c02bce6c 00000000 c7d2e300 c067c258 0000005c c067c294 00000001
be40: c760a000 00000000 c760be74 c760be58 c00af984 c00ad5fc 0000005c 00000000
be60: 00000000 00000002 c760be8c c760be78 c0039080 c00af8d0 ffffffff fa200000
be80: c760beec c760be90 c0039b6c c003900c 00000001 00000000 c7d1e240 00000000
bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec
bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff 00000000 c068bae8
bee0: c760bf24 c760bef0 c00ff7d0 c0064ec4 00000001 00000000 c00ff700 00000000
bf00: c0087f00 00000000 60000013 c0d76a70 c0e23795 00000001 c760bf4c c760bf28
bf20: c00ffdd8 c00ff70c c068bb08 c068bae8 60000013 c0100938 c068bb30 00000000
bf40: c760bf84 c760bf50 c010014c c00ffd84 00000001 00000000 c010000c 00012c00
bf60: c7c33f04 00012c00 c7c33f04 00000000 c0100938 00000000 c760bf9c c760bf88
bf80: c01009a8 c0100018 c760bfa8 c7c33f04 c760bff4 c760bfa0 c0088000 c0100944
bfa0: c760bf98 00000000 00000000 00000001 dead4ead ffffffff ffffffff c08ba2bc
bfc0: 00000000 c049e7fa 00000000 c0087f70 c760bfd0 c760bfd0 c7c33f04 c0087f70
bfe0: c006f5e8 00000013 00000000 c760bff8 c006f5e8 c0087f7c 7f0004ff df2000ff
Backtrace:
[<c02c06a8>] (musb_g_rx+0x0/0x2ec) from [<c02bcd68>] (musb_interrupt+0xbc8/0xcc0)
[<c02bc1a0>] (musb_interrupt+0x0/0xcc0) from [<c02bcecc>] (generic_interrupt+0x6c/0x84)
[<c02bce60>] (generic_interrupt+0x0/0x84) from [<c00ad698>] (handle_IRQ_event+0xa8/0x1ec)
 r7:c760a000 r6:0000005c r5:c7d2e300 r4:c7d2e300
[<c00ad5f0>] (handle_IRQ_event+0x0/0x1ec) from [<c00af984>] (handle_level_irq+0xc0/0x13c)
[<c00af8c4>] (handle_level_irq+0x0/0x13c) from [<c0039080>] (asm_do_IRQ+0x80/0xa0)
 r7:00000002 r6:00000000 r5:00000000 r4:0000005c
[<c0039000>] (asm_do_IRQ+0x0/0xa0) from [<c0039b6c>] (__irq_svc+0x4c/0xb4)
Exception stack(0xc760be90 to 0xc760bed8)
be80:                                     00000001 00000000 c7d1e240 00000000
bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec
bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff
 r5:fa200000 r4:ffffffff
[<c0064eb8>] (sub_preempt_count+0x0/0x100) from [<c00ff7d0>] (find_and_get_object+0xd0/0x110)
 r5:c068bae8 r4:00000000
[<c00ff700>] (find_and_get_object+0x0/0x110) from [<c00ffdd8>] (scan_block+0x60/0x104)
 r8:00000001 r7:c0e23795 r6:c0d76a70 r5:60000013 r4:00000000
[<c00ffd78>] (scan_block+0x0/0x104) from [<c010014c>] (kmemleak_scan+0x140/0x484)
[<c010000c>] (kmemleak_scan+0x0/0x484) from [<c01009a8>] (kmemleak_scan_thread+0x70/0xcc)
 r8:00000000 r7:c0100938 r6:00000000 r5:c7c33f04 r4:00012c00
[<c0100938>] (kmemleak_scan_thread+0x0/0xcc) from [<c0088000>] (kthread+0x90/0x98)
 r5:c7c33f04 r4:c760bfa8
[<c0087f70>] (kthread+0x0/0x98) from [<c006f5e8>] (do_exit+0x0/0x684)
 r7:00000013 r6:c006f5e8 r5:c0087f70 r4:c7c33f04
Code: e3002312 e58d6000 e2833e16 eb0422d5 (e5963020)
---[ end trace f3d5e96f75c297b7 ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by:   Sergei Shtylyov <sshtylyov@mvista.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 6fca870e957e..de0ca90ceb9b 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -568,11 +568,19 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 {
 	const u8		epnum = req->epnum;
 	struct usb_request	*request = &req->request;
-	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	struct musb_ep		*musb_ep;
 	void __iomem		*epio = musb->endpoints[epnum].regs;
 	unsigned		fifo_count = 0;
-	u16			len = musb_ep->packet_sz;
+	u16			len;
 	u16			csr = musb_readw(epio, MUSB_RXCSR);
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+
+	if (hw_ep->is_shared_fifo)
+		musb_ep = &hw_ep->ep_in;
+	else
+		musb_ep = &hw_ep->ep_out;
+
+	len = musb_ep->packet_sz;
 
 	/* We shouldn't get here while DMA is active, but we do... */
 	if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) {
@@ -740,9 +748,15 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 	u16			csr;
 	struct usb_request	*request;
 	void __iomem		*mbase = musb->mregs;
-	struct musb_ep		*musb_ep = &musb->endpoints[epnum].ep_out;
+	struct musb_ep		*musb_ep;
 	void __iomem		*epio = musb->endpoints[epnum].regs;
 	struct dma_channel	*dma;
+	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
+
+	if (hw_ep->is_shared_fifo)
+		musb_ep = &hw_ep->ep_in;
+	else
+		musb_ep = &hw_ep->ep_out;
 
 	musb_ep_select(mbase, epnum);
 

From eeb1b2a4a9112bcd05d0ce53b99bbd5404abe060 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 20 Sep 2010 10:32:02 +0300
Subject: [PATCH 542/728] usb: musb: gadget: fix bulk IN infinit hangs in
 double buffer case

This patch fixes one infinite hang of bulk IN transfer in double buffer
case, the hang can be observed easily by test #6 of usbtest if musb is
configured as g_zero and fifo mode 3 is taken to enable double fifo.

In fact, the patch only removes the check for non-empty fifo before
loading data from new request into fifo since the check is not correct:

	-in double buffer case, fifo may accommodate more than one packet,
	even though it has contained one packet already and is non-empty

	-since last DMA is completed before calling musb_g_tx, it is sure
	that fifo may accommodate at least one packet

Without applying the patch, new requst enqueued from .complte may not
have a chance to be loaded into fifo, then will never be completed and
cause infinite hangs.

With the patch, on my beagle B5, test#6(queued bulk in) can be passed and
test result may go beyond 33Mbyte/s if musb is configured as g_zero and
fifo mode 3 is taken, follows the test command:

	#testusb -D DEV_NAME -c 1024 -t 6 -s 32768 -g 8   [1]

[1],
    -source of testusb : tools/usb/testusb.c under linux kernel;

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index de0ca90ceb9b..f206c94b8b1c 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -504,18 +504,6 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 			/* ... or if not, then complete it. */
 			musb_g_giveback(musb_ep, request, 0);
 
-			/*
-			 * Kickstart next transfer if appropriate;
-			 * the packet that just completed might not
-			 * be transmitted for hours or days.
-			 * REVISIT for double buffering...
-			 * FIXME revisit for stalls too...
-			 */
-			musb_ep_select(mbase, epnum);
-			csr = musb_readw(epio, MUSB_TXCSR);
-			if (csr & MUSB_TXCSR_FIFONOTEMPTY)
-				return;
-
 			request = musb_ep->desc ? next_request(musb_ep) : NULL;
 			if (!request) {
 				DBG(4, "%s idle now\n",

From 490e5fbe8ccb198fb719ae49eaa0c7071273e016 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 20 Sep 2010 10:32:03 +0300
Subject: [PATCH 543/728] usb: musb: gadget: enable autoclear for OUT transfer
 in both DMA 0 and DMA 1

This patch fixes one bugs of OUT transfer in double buffer case:

	-the current code only enable autoclear for dma mode 1, and not
	for dma mode 0

Without this patch, test #5 of usbtest can't be passed if we
configure musb as g_zero and use fifo mode 3 to enable double
buffer mode.

With this patch and the following patch(fix dma length),
on my beagle B5, test#5(queued bulk out) may go beyond
18Mbyte/s(seems dma mode 0 is quicker in double buffer case)
if musb is configured as g_zero and fifo mode 3 is taken, follows
the test command:

    #./testusb -D DEV_NAME -c 1024 -t 5 -s 32768 -g 8   [1]

Also I have tested this patch can't make g_ether broken.

[1],source of testusb : tools/usb/testusb.c under linux kernel;

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f206c94b8b1c..176e1276dc28 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -643,8 +643,8 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 */
 
 				csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
 				csr |= MUSB_RXCSR_AUTOCLEAR;
+#ifdef USE_MODE1
 				/* csr |= MUSB_RXCSR_DMAMODE; */
 
 				/* this special sequence (enabling and then

From 1018b4e44f4f191c6e3c631c4eee35d0a112d32b Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 20 Sep 2010 10:32:04 +0300
Subject: [PATCH 544/728] usb: musb: gadget: fix DMA length for OUT transfer

DMA length should not go beyond the availabe space of request buffer,
so fix it.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 176e1276dc28..f3ee04f2e17d 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -659,10 +659,11 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				if (request->actual < request->length) {
 					int transfer_size = 0;
 #ifdef USE_MODE1
-					transfer_size = min(request->length,
+					transfer_size = min(request->length - request->actual,
 							channel->max_len);
 #else
-					transfer_size = len;
+					transfer_size = min(request->length - request->actual,
+							(unsigned)len);
 #endif
 					if (transfer_size <= musb_ep->packet_sz)
 						musb_ep->dma->desired_mode = 0;

From bb27bc2c1133372b54d00f3077ea4acbbf459045 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 20 Sep 2010 10:32:05 +0300
Subject: [PATCH 545/728] usb: musb: gadget: complete request only if data is
 transfered over

Complete the current request only if the data transfer is over.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f3ee04f2e17d..fa826f9e262b 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -501,14 +501,14 @@ void musb_g_tx(struct musb *musb, u8 epnum)
 				request->zero = 0;
 			}
 
-			/* ... or if not, then complete it. */
-			musb_g_giveback(musb_ep, request, 0);
-
-			request = musb_ep->desc ? next_request(musb_ep) : NULL;
-			if (!request) {
-				DBG(4, "%s idle now\n",
-					musb_ep->end_point.name);
-				return;
+			if (request->actual == request->length) {
+				musb_g_giveback(musb_ep, request, 0);
+				request = musb_ep->desc ? next_request(musb_ep) : NULL;
+				if (!request) {
+					DBG(4, "%s idle now\n",
+						musb_ep->end_point.name);
+					return;
+				}
 			}
 		}
 

From 66af83ddf7b5a4ea94e79cbeadaa0aeed4def5f7 Mon Sep 17 00:00:00 2001
From: Ming Lei <tom.leiming@gmail.com>
Date: Mon, 20 Sep 2010 10:32:06 +0300
Subject: [PATCH 546/728] usb: musb: gadget: fix dma length in txstate

DMA length should not go beyond the availabe space
of request buffer, so fix it.

Also set max_len of cppi dma channel as max size of
int type, so make musb dma handling happier.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/cppi_dma.c    |  1 +
 drivers/usb/musb/musb_gadget.c | 18 +++++++++---------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 59dc3d351b60..5ab5bb89bae3 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -322,6 +322,7 @@ cppi_channel_allocate(struct dma_controller *c,
 				index, transmit ? 'T' : 'R', cppi_ch);
 	cppi_ch->hw_ep = ep;
 	cppi_ch->channel.status = MUSB_DMA_STATUS_FREE;
+	cppi_ch->channel.max_len = 0x7fffffff;
 
 	DBG(4, "Allocate CPPI%d %cX\n", index, transmit ? 'T' : 'R');
 	return &cppi_ch->channel;
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index fa826f9e262b..cacae96468b9 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -300,6 +300,11 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #ifndef	CONFIG_MUSB_PIO_ONLY
 	if (is_dma_capable() && musb_ep->dma) {
 		struct dma_controller	*c = musb->dma_controller;
+		size_t request_size;
+
+		/* setup DMA, then program endpoint CSR */
+		request_size = min_t(size_t, request->length - request->actual,
+					musb_ep->dma->max_len);
 
 		use_dma = (request->dma != DMA_ADDR_INVALID);
 
@@ -307,11 +312,6 @@ static void txstate(struct musb *musb, struct musb_request *req)
 
 #ifdef CONFIG_USB_INVENTRA_DMA
 		{
-			size_t request_size;
-
-			/* setup DMA, then program endpoint CSR */
-			request_size = min_t(size_t, request->length,
-						musb_ep->dma->max_len);
 			if (request_size < musb_ep->packet_sz)
 				musb_ep->dma->desired_mode = 0;
 			else
@@ -373,8 +373,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
 		use_dma = use_dma && c->channel_program(
 				musb_ep->dma, musb_ep->packet_sz,
 				0,
-				request->dma,
-				request->length);
+				request->dma + request->actual,
+				request_size);
 		if (!use_dma) {
 			c->channel_release(musb_ep->dma);
 			musb_ep->dma = NULL;
@@ -386,8 +386,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
 		use_dma = use_dma && c->channel_program(
 				musb_ep->dma, musb_ep->packet_sz,
 				request->zero,
-				request->dma,
-				request->length);
+				request->dma + request->actual,
+				request_size);
 #endif
 	}
 #endif

From 4c647338267e14c93892f6f125f17ea2419eea51 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon, 20 Sep 2010 10:32:07 +0300
Subject: [PATCH 547/728] usb: musb: host: Issue a memory barrier before
 starting DMA

This patch fixes the issue which was observed while transfering
a large file ( > 20MB) over USB (OMAP MUSB controller acts as USB host)
to an attached USB thumb drive.

It was found that CDB field of CBW packet was set to 0x0. This was
due to missing a barrier before DMA engine starts transfer.
This  buffer is  allocated using dma_alloc_coherent which gives
non-cacheble but bufferable memory and hence needed a write
memory barrier to flush the write buffer.

More info on this thread is here:
	http://www.spinics.net/lists/linux-omap/msg33987.html

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Maulik Mankad <x0082077@ti.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_host.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 877d20b1dff9..9e65c47cc98b 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -660,6 +660,12 @@ static bool musb_tx_dma_program(struct dma_controller *dma,
 
 	qh->segsize = length;
 
+	/*
+	 * Ensure the data reaches to main memory before starting
+	 * DMA transfer
+	 */
+	wmb();
+
 	if (!dma->channel_program(channel, pkt_size, mode,
 			urb->transfer_dma + offset, length)) {
 		dma->channel_release(channel);

From a666e3e6098a9f56310e4ec2705f1dad124a34b5 Mon Sep 17 00:00:00 2001
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Date: Sat, 11 Sep 2010 13:23:12 -0500
Subject: [PATCH 548/728] usb: musb: gadget: restart request on clearing
 endpoint halt

Commit 46034dca515bc4ddca0399ae58106d1f5f0d809f (USB: musb_gadget_ep0: stop
abusing musb_gadget_set_halt()) forgot to restart a queued request after
clearing the endpoint halt feature. This results in a couple of USB resets
while enumerating the file-backed storage gadget due to CSW packet not being
sent for the MODE SENSE(10) command.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: stable@kernel.org
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget.c     | 2 +-
 drivers/usb/musb/musb_gadget.h     | 2 ++
 drivers/usb/musb/musb_gadget_ep0.c | 9 +++++++++
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index cacae96468b9..d065e23f123e 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1084,7 +1084,7 @@ struct free_record {
 /*
  * Context: controller locked, IRQs blocked.
  */
-static void musb_ep_restart(struct musb *musb, struct musb_request *req)
+void musb_ep_restart(struct musb *musb, struct musb_request *req)
 {
 	DBG(3, "<== %s request %p len %u on hw_ep%d\n",
 		req->tx ? "TX/IN" : "RX/OUT",
diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h
index c8b140325d82..572b1da7f2dc 100644
--- a/drivers/usb/musb/musb_gadget.h
+++ b/drivers/usb/musb/musb_gadget.h
@@ -105,4 +105,6 @@ extern void musb_gadget_cleanup(struct musb *);
 
 extern void musb_g_giveback(struct musb_ep *, struct usb_request *, int);
 
+extern void musb_ep_restart(struct musb *, struct musb_request *);
+
 #endif		/* __MUSB_GADGET_H */
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 59bef8f3a358..6dd03f4c5f49 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -261,6 +261,7 @@ __acquires(musb->lock)
 					ctrlrequest->wIndex & 0x0f;
 				struct musb_ep		*musb_ep;
 				struct musb_hw_ep	*ep;
+				struct musb_request	*request;
 				void __iomem		*regs;
 				int			is_in;
 				u16			csr;
@@ -302,6 +303,14 @@ __acquires(musb->lock)
 					musb_writew(regs, MUSB_RXCSR, csr);
 				}
 
+				/* Maybe start the first request in the queue */
+				request = to_musb_request(
+						next_request(musb_ep));
+				if (!musb_ep->busy && request) {
+					DBG(3, "restarting the request\n");
+					musb_ep_restart(musb, request);
+				}
+
 				/* select ep0 again */
 				musb_ep_select(mbase, 0);
 				} break;

From 2dab3948f5eeffa320ad92207ef77c997518867b Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Fri, 24 Sep 2010 11:41:46 -0400
Subject: [PATCH 549/728] USB: update Kconfig help text for CONFIG_USB_SUSPEND

This patch (as1429) updates the Kconfig help text for
CONFIG_USB_SUSPEND.  The power/level file is now deprecated; we should
tell people to use power/control instead.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 7e594449600e..9eed5b52d9de 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -91,12 +91,12 @@ config USB_DYNAMIC_MINORS
 	  If you are unsure about this, say N here.
 
 config USB_SUSPEND
-	bool "USB runtime power management (suspend/resume and wakeup)"
+	bool "USB runtime power management (autosuspend) and wakeup"
 	depends on USB && PM_RUNTIME
 	help
 	  If you say Y here, you can use driver calls or the sysfs
-	  "power/level" file to suspend or resume individual USB
-	  peripherals and to enable or disable autosuspend (see
+	  "power/control" file to enable or disable autosuspend for
+	  individual USB peripherals (see
 	  Documentation/usb/power-management.txt for more details).
 
 	  Also, USB "remote wakeup" signaling is supported, whereby some

From f7c77a3dc4683659b6f0d1b6cbc82b6253d095e0 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 23 Sep 2010 10:01:11 -0700
Subject: [PATCH 550/728] hwmon: (lis3) Fix Oops with NULL platform data

The recent addition of threaded irq handler causes a NULL dereference
when used with hp_accel driver, which has NULL pdata.

Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/lis3lv02d.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index 6138f036b159..fc591ae53107 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -277,7 +277,7 @@ static irqreturn_t lis302dl_interrupt(int irq, void *dummy)
 	wake_up_interruptible(&lis3_dev.misc_wait);
 	kill_fasync(&lis3_dev.async_queue, SIGIO, POLL_IN);
 out:
-	if (lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
+	if (lis3_dev.pdata && lis3_dev.whoami == WAI_8B && lis3_dev.idev &&
 	    lis3_dev.idev->input->users)
 		return IRQ_WAKE_THREAD;
 	return IRQ_HANDLED;
@@ -718,7 +718,7 @@ int lis3lv02d_init_device(struct lis3lv02d *dev)
 	 * io-apic is not configurable (and generates a warning) but I keep it
 	 * in case of support for other hardware.
 	 */
-	if (dev->whoami == WAI_8B)
+	if (dev->pdata && dev->whoami == WAI_8B)
 		thread_fn = lis302dl_interrupt_thread1_8b;
 	else
 		thread_fn = NULL;

From 89a3fd35ba0318a7208e2c8d8ca6189f567d4a93 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 13 Sep 2010 10:05:51 +0000
Subject: [PATCH 551/728] x86/hwmon: fix module init for
 hotplug-but-no-device-found case

In commit 0dca94baeab4a1a514841b0a4c8e3a51dfb4d5ae the call to
platform_driver_unregister() was made conditional upon !HOTPLUG_CPU,
but the return value from coretemp_init() was left to indicate an
error. This isn't correct, as the negative return value indicates to
the module loader that initialization failed, which isn't intended
here and results in dangling pointers.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/coretemp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index de8111114f46..6b3ef553bd13 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -541,16 +541,19 @@ static int __init coretemp_init(void)
 				" has no thermal sensor.\n", c->x86_model);
 		}
 	}
+
+#ifndef CONFIG_HOTPLUG_CPU
 	if (list_empty(&pdev_list)) {
 		err = -ENODEV;
 		goto exit_driver_unreg;
 	}
+#endif
 
 	register_hotcpu_notifier(&coretemp_cpu_notifier);
 	return 0;
 
-exit_driver_unreg:
 #ifndef CONFIG_HOTPLUG_CPU
+exit_driver_unreg:
 	platform_driver_unregister(&coretemp_driver);
 #endif
 exit:

From d9bca4358286584cc22f4261ee3a60cad01aa4d4 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 13 Sep 2010 10:11:05 +0000
Subject: [PATCH 552/728] x86/hwmon: avoid deadlock on CPU removal in pkgtemp

pkgtemp_device_remove(), holding the list protecting mutex, calls
pkgtemp_device_add(), which itself wants to acquire the same mutex.
Holding the mutex over the entire loop body in pkgtemp_device_remove()
isn't really necessary, as long as the loop gets exited after
processing the matched CPU.

Once exiting the loop after removing an eventual match, there's no
need for using the "safe" list iterator anymore.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/pkgtemp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index 74157fcda6ed..844957333fe5 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -339,17 +339,18 @@ exit:
 #ifdef CONFIG_HOTPLUG_CPU
 static void pkgtemp_device_remove(unsigned int cpu)
 {
-	struct pdev_entry *p, *n;
+	struct pdev_entry *p;
 	unsigned int i;
 	int err;
 
 	mutex_lock(&pdev_list_mutex);
-	list_for_each_entry_safe(p, n, &pdev_list, list) {
+	list_for_each_entry(p, &pdev_list, list) {
 		if (p->cpu != cpu)
 			continue;
 
 		platform_device_unregister(p->pdev);
 		list_del(&p->list);
+		mutex_unlock(&pdev_list_mutex);
 		kfree(p);
 		for_each_cpu(i, cpu_core_mask(cpu)) {
 			if (i != cpu) {
@@ -358,7 +359,7 @@ static void pkgtemp_device_remove(unsigned int cpu)
 					break;
 			}
 		}
-		break;
+		return;
 	}
 	mutex_unlock(&pdev_list_mutex);
 }

From d172132f358552eabd7a7410e478ffeead445243 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 13 Sep 2010 10:14:43 +0000
Subject: [PATCH 553/728] x86/hwmon: don't leak device attribute file from
 pkgtemp_probe() and pkgtemp_remove()

While apparently inherited from coretemp source, this particular error handling
cleanup and exit path wasn't copied properly (or perhaps got discarded
intermediately and not re-added properly later).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
(added device file removal in pkgtemp_remove)
---
 drivers/hwmon/pkgtemp.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index 844957333fe5..f7ddee5fe9d5 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -224,7 +224,7 @@ static int __devinit pkgtemp_probe(struct platform_device *pdev)
 
 	err = sysfs_create_group(&pdev->dev.kobj, &pkgtemp_group);
 	if (err)
-		goto exit_free;
+		goto exit_dev;
 
 	data->hwmon_dev = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(data->hwmon_dev)) {
@@ -238,6 +238,8 @@ static int __devinit pkgtemp_probe(struct platform_device *pdev)
 
 exit_class:
 	sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+exit_dev:
+	device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
 exit_free:
 	kfree(data);
 exit:
@@ -250,6 +252,7 @@ static int __devexit pkgtemp_remove(struct platform_device *pdev)
 
 	hwmon_device_unregister(data->hwmon_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &pkgtemp_group);
+	device_remove_file(&pdev->dev, &sensor_dev_attr_temp1_max.dev_attr);
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
 	return 0;

From a46590533ad7b0f3f640732081d7e1658145c0ba Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Thu, 23 Sep 2010 22:21:34 -0700
Subject: [PATCH 554/728] x86/hwmon: fix initialization of coretemp

Using cpuid_eax() to determine feature availability on other than
the current CPU is invalid. And feature availability should also be
checked in the hotplug code path.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 arch/x86/include/asm/cpufeature.h |  1 +
 arch/x86/kernel/cpu/scattered.c   |  1 +
 drivers/hwmon/coretemp.c          | 29 +++++++++++++----------------
 3 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index c6fbb7b430d1..3f76523589af 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -168,6 +168,7 @@
 #define X86_FEATURE_XSAVEOPT	(7*32+ 4) /* Optimized Xsave */
 #define X86_FEATURE_PLN		(7*32+ 5) /* Intel Power Limit Notification */
 #define X86_FEATURE_PTS		(7*32+ 6) /* Intel Package Thermal Status */
+#define X86_FEATURE_DTS		(7*32+ 7) /* Digital Thermal Sensor */
 
 /* Virtualization flags: Linux defined, word 8 */
 #define X86_FEATURE_TPR_SHADOW  (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index 34b4dad6f0b8..d49079515122 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -31,6 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	const struct cpuid_bit *cb;
 
 	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
+		{ X86_FEATURE_DTS,		CR_EAX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
 		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
 		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 6b3ef553bd13..5850da64ae28 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -423,9 +423,18 @@ static int __cpuinit coretemp_device_add(unsigned int cpu)
 	int err;
 	struct platform_device *pdev;
 	struct pdev_entry *pdev_entry;
-#ifdef CONFIG_SMP
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
-#endif
+
+	/*
+	 * CPUID.06H.EAX[0] indicates whether the CPU has thermal
+	 * sensors. We check this bit only, all the early CPUs
+	 * without thermal sensors will be filtered out.
+	 */
+	if (!cpu_has(c, X86_FEATURE_DTS)) {
+		printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
+		       " has no thermal sensor.\n", c->x86_model);
+		return 0;
+	}
 
 	mutex_lock(&pdev_list_mutex);
 
@@ -527,20 +536,8 @@ static int __init coretemp_init(void)
 	if (err)
 		goto exit;
 
-	for_each_online_cpu(i) {
-		struct cpuinfo_x86 *c = &cpu_data(i);
-		/*
-		 * CPUID.06H.EAX[0] indicates whether the CPU has thermal
-		 * sensors. We check this bit only, all the early CPUs
-		 * without thermal sensors will be filtered out.
-		 */
-		if (c->cpuid_level >= 6 && (cpuid_eax(0x06) & 0x01))
-			coretemp_device_add(i);
-		else {
-			printk(KERN_INFO DRVNAME ": CPU (model=0x%x)"
-				" has no thermal sensor.\n", c->x86_model);
-		}
-	}
+	for_each_online_cpu(i)
+		coretemp_device_add(i);
 
 #ifndef CONFIG_HOTPLUG_CPU
 	if (list_empty(&pdev_list)) {

From f6aeccdb96fc0555e939dd507702922f07dcbcbb Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 13 Sep 2010 10:18:54 +0000
Subject: [PATCH 555/728] x86/hwmon: fix initialization of pkgtemp

Feature availability should also be checked in the hotplug code path.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/pkgtemp.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index f7ddee5fe9d5..ab89f23eebdf 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -284,9 +284,10 @@ static int __cpuinit pkgtemp_device_add(unsigned int cpu)
 	int err;
 	struct platform_device *pdev;
 	struct pdev_entry *pdev_entry;
-#ifdef CONFIG_SMP
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
-#endif
+
+	if (!cpu_has(c, X86_FEATURE_PTS))
+		return 0;
 
 	mutex_lock(&pdev_list_mutex);
 
@@ -403,11 +404,6 @@ static int __init pkgtemp_init(void)
 		goto exit;
 
 	for_each_online_cpu(i) {
-		struct cpuinfo_x86 *c = &cpu_data(i);
-
-		if (!cpu_has(c, X86_FEATURE_PTS))
-			continue;
-
 		err = pkgtemp_device_add(i);
 		if (err)
 			goto exit_devices_unreg;

From e40cc4bdfd4b89813f072f72bd9c7055814d3f0f Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 13 Sep 2010 10:23:05 +0000
Subject: [PATCH 556/728] x86/hwmon: register alternate sibling upon CPU
 removal

Just like pkgtemp registers another core of the same package when one
gets removed, coretemp should register another hyperthread (if
available) in that situation.

As pointed out in the patch fixing the respective code in pkgtemp, the
list protectng mutex must be dropped before calling
coretemp_device_add(), and due to the restructured loop (including an
explicit return) the "safe" variant of the list iterator isn't needed
anymore.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/coretemp.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 5850da64ae28..baa842a80b4b 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -491,14 +491,22 @@ exit:
 
 static void coretemp_device_remove(unsigned int cpu)
 {
-	struct pdev_entry *p, *n;
+	struct pdev_entry *p;
+	unsigned int i;
+
 	mutex_lock(&pdev_list_mutex);
-	list_for_each_entry_safe(p, n, &pdev_list, list) {
-		if (p->cpu == cpu) {
-			platform_device_unregister(p->pdev);
-			list_del(&p->list);
-			kfree(p);
-		}
+	list_for_each_entry(p, &pdev_list, list) {
+		if (p->cpu != cpu)
+			continue;
+
+		platform_device_unregister(p->pdev);
+		list_del(&p->list);
+		mutex_unlock(&pdev_list_mutex);
+		kfree(p);
+		for_each_cpu(i, cpu_sibling_mask(cpu))
+			if (i != cpu && !coretemp_device_add(i))
+				break;
+		return;
 	}
 	mutex_unlock(&pdev_list_mutex);
 }

From 885374e37bd782acd70a1a0c6b14b3eb2bb3a99c Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Fri, 24 Sep 2010 08:43:44 -0700
Subject: [PATCH 557/728] MAINTAINERS: Update hwmon entry

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index df342839b8c1..ceba39bc1b49 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2668,6 +2668,8 @@ M:	Guenter Roeck <guenter.roeck@ericsson.com>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T:	quilt kernel.org/pub/linux/kernel/people/groeck/linux-staging/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
 S:	Maintained
 F:	Documentation/hwmon/
 F:	drivers/hwmon/

From 0eae7799000cdf0c2ed596c39bfb71030809fc71 Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Mon, 13 Sep 2010 10:24:47 +0000
Subject: [PATCH 558/728] x86/hwmon: pkgtemp has no dependency on PCI

Other than coretemp, from which this code was apparently derived, there
is no PCI specific code in this driver.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/Kconfig   | 2 +-
 drivers/hwmon/pkgtemp.c | 1 -
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4d4d09bdec0a..97499d00615a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -409,7 +409,7 @@ config SENSORS_CORETEMP
 
 config SENSORS_PKGTEMP
 	tristate "Intel processor package temperature sensor"
-	depends on X86 && PCI && EXPERIMENTAL
+	depends on X86 && EXPERIMENTAL
 	help
 	  If you say yes here you get support for the package level temperature
 	  sensor inside your CPU. Check documentation/driver for details.
diff --git a/drivers/hwmon/pkgtemp.c b/drivers/hwmon/pkgtemp.c
index ab89f23eebdf..f11903936c8b 100644
--- a/drivers/hwmon/pkgtemp.c
+++ b/drivers/hwmon/pkgtemp.c
@@ -33,7 +33,6 @@
 #include <linux/list.h>
 #include <linux/platform_device.h>
 #include <linux/cpu.h>
-#include <linux/pci.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
 

From 539986482b0db07b7164ab086d167ab99b4d3061 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 24 Sep 2010 16:46:14 -0400
Subject: [PATCH 559/728] PM / ACPI: Blacklist systems known to require
 acpi_sleep=nonvs

Commit 2a6b69765ad794389f2fc3e14a0afa1a995221c2 (ACPI: Store NVS
state even when entering suspend to RAM) changed the ACPI suspend
to RAM code so that the NVS memory area is always unconditionally
saved during suspend and restored during resume, since some systems
evidently need that for the suspend-resume to work on them.  However,
it turned out that this change broke suspend-resume on a few systems,
so commit 72ad5d77fb981963edae15eee8196c80238f5ed0 (ACPI / Sleep:
Allow the NVS saving to be skipped during suspend to RAM) introduced
the acpi_sleep=nonvs command line switch to allow their users to
work around this issue.  To keep track of the systems that require
this workaround and to make the life of their users slightly easier
blacklist them in acpisleep_dmi_table[].

https://bugzilla.kernel.org/show_bug.cgi?id=16396

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/sleep.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index cf82989ae756..4754ff6e70e6 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -363,6 +363,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init init_nvs_nosave(const struct dmi_system_id *d)
+{
+	acpi_nvs_nosave();
+	return 0;
+}
+
 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 	{
 	.callback = init_old_suspend_ordering,
@@ -397,6 +403,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 		},
 	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-SR11M",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Everex StepNote Series",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */

From a7f8388e2c167c73b6abb3b749157aafd08f90ee Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 24 Sep 2010 06:20:35 +0100
Subject: [PATCH 560/728] m32r: fix rt_sigsuspend()

do_signal() should know about saved_mask for it to work...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/include/asm/signal.h |  1 -
 arch/m32r/include/asm/unistd.h |  1 +
 arch/m32r/kernel/entry.S       |  3 +--
 arch/m32r/kernel/signal.c      | 48 +++++++++-------------------------
 4 files changed, 14 insertions(+), 39 deletions(-)

diff --git a/arch/m32r/include/asm/signal.h b/arch/m32r/include/asm/signal.h
index 9c1acb2b1a92..b2eeb0de1c8d 100644
--- a/arch/m32r/include/asm/signal.h
+++ b/arch/m32r/include/asm/signal.h
@@ -157,7 +157,6 @@ typedef struct sigaltstack {
 #undef __HAVE_ARCH_SIG_BITOPS
 
 struct pt_regs;
-extern int do_signal(struct pt_regs *regs, sigset_t *oldset);
 
 #define ptrace_signal_deliver(regs, cookie)	do { } while (0)
 
diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h
index 76125777483c..c70545689da8 100644
--- a/arch/m32r/include/asm/unistd.h
+++ b/arch/m32r/include/asm/unistd.h
@@ -351,6 +351,7 @@
 #define __ARCH_WANT_SYS_OLD_GETRLIMIT /*will be unused*/
 #define __ARCH_WANT_SYS_OLDUMOUNT
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #define __IGNORE_lchown
 #define __IGNORE_setuid
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 403869833b98..90149daa560f 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -235,8 +235,7 @@ work_resched:
 work_notifysig:				; deal with pending signals and
 					; notify-resume requests
 	mv	r0, sp			; arg1 : struct pt_regs *regs
-	ldi	r1, #0			; arg2 : sigset_t *oldset
-	mv	r2, r9			; arg3 : __u32 thread_info_flags
+	ldi	r1, r9			; arg2 : __u32 thread_info_flags
 	bl	do_notify_resume
 	bra	restore_all
 
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 144b0f124fc7..acd69f7f3357 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -28,37 +28,6 @@
 
 #define DEBUG_SIG 0
 
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-int do_signal(struct pt_regs *, sigset_t *);
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
-		  unsigned long r2, unsigned long r3, unsigned long r4,
-		  unsigned long r5, unsigned long r6, struct pt_regs *regs)
-{
-	sigset_t newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, sigmask(SIGKILL)|sigmask(SIGSTOP));
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
 asmlinkage int
 sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r2, unsigned long r3, unsigned long r4,
@@ -332,12 +301,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+static int do_signal(struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
 	unsigned short inst;
+	sigset_t *oldset;
 
 	/*
 	 * We want the common case to go fast, which
@@ -351,7 +321,9 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 	if (try_to_freeze()) 
 		goto no_signal;
 
-	if (!oldset)
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else
 		oldset = &current->blocked;
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
@@ -364,6 +336,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 
 		/* Whee!  Actually deliver the signal.  */
 		handle_signal(signr, &ka, &info, oldset, regs);
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
 		return 1;
 	}
 
@@ -391,6 +364,10 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
 				regs->bpc -= 4;
 		}
 	}
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
 	return 0;
 }
 
@@ -398,8 +375,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset)
  * notification of userspace execution resumption
  * - triggered by current->work.notify_resume
  */
-void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
-		      __u32 thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, __u32 thread_info_flags)
 {
 	/* Pending single-step? */
 	if (thread_info_flags & _TIF_SINGLESTEP)
@@ -407,7 +383,7 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
-		do_signal(regs,oldset);
+		do_signal(regs);
 
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);

From a748102430f4dbbfca3ff81ac12db6e4f1243677 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 24 Sep 2010 06:22:30 +0100
Subject: [PATCH 561/728] make m32r handle multiple pending signals

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/kernel/entry.S  | 4 ++--
 arch/m32r/kernel/signal.c | 6 ++++--
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 90149daa560f..225412bc227e 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -235,9 +235,9 @@ work_resched:
 work_notifysig:				; deal with pending signals and
 					; notify-resume requests
 	mv	r0, sp			; arg1 : struct pt_regs *regs
-	ldi	r1, r9			; arg2 : __u32 thread_info_flags
+	mv	r1, r9			; arg2 : __u32 thread_info_flags
 	bl	do_notify_resume
-	bra	restore_all
+	bra	resume_userspace
 
 	; perform syscall exit tracing
 	ALIGN
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index acd69f7f3357..db152263484f 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -282,6 +282,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 					regs->bpc -= 2;
 				else
 					regs->bpc -= 4;
+				regs->syscall_nr = -1;
 		}
 	}
 
@@ -353,8 +354,8 @@ static int do_signal(struct pt_regs *regs)
 				regs->bpc -= 2;
 			else
 				regs->bpc -= 4;
-		}
-		if (regs->r0 == -ERESTART_RESTARTBLOCK){
+			regs->syscall_nr = -1;
+		} else if (regs->r0 == -ERESTART_RESTARTBLOCK){
 			regs->r0 = regs->orig_r0;
 			regs->r7 = __NR_restart_syscall;
 			inst = *(unsigned short *)(regs->bpc - 2);
@@ -362,6 +363,7 @@ static int do_signal(struct pt_regs *regs)
 				regs->bpc -= 2;
 			else
 				regs->bpc -= 4;
+			regs->syscall_nr = -1;
 		}
 	}
 	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {

From a05c4e1d669d09faa90ce7b22646ad1a4b0de3ff Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 24 Sep 2010 06:23:57 +0100
Subject: [PATCH 562/728] m32r: don't block signals if sigframe setup has
 failed

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/kernel/signal.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index db152263484f..a56fcbd8abe6 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -187,7 +187,7 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 	return (void __user *)((sp - frame_size) & -8ul);
 }
 
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			   sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
@@ -244,17 +244,18 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		current->comm, current->pid, frame, regs->pc);
 #endif
 
-	return;
+	return 0;
 
 give_sigsegv:
 	force_sigsegv(sig, current);
+	return -EFAULT;
 }
 
 /*
  * OK, we're invoking a handler
  */
 
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs)
 {
@@ -287,7 +288,8 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	}
 
 	/* Set up the stack frame */
-	setup_rt_frame(sig, ka, info, oldset, regs);
+	if (setup_rt_frame(sig, ka, info, oldset, regs))
+		return -EFAULT;
 
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
@@ -295,6 +297,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 		sigaddset(&current->blocked,sig);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
+	return 0;
 }
 
 /*
@@ -302,7 +305,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-static int do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
@@ -317,7 +320,7 @@ static int do_signal(struct pt_regs *regs)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 1;
+		return;
 
 	if (try_to_freeze()) 
 		goto no_signal;
@@ -336,9 +339,10 @@ static int do_signal(struct pt_regs *regs)
 		 */
 
 		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &ka, &info, oldset, regs);
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		return 1;
+		if (handle_signal(signr, &ka, &info, oldset, regs) == 0)
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		return;
 	}
 
  no_signal:
@@ -370,7 +374,6 @@ static int do_signal(struct pt_regs *regs)
 		clear_thread_flag(TIF_RESTORE_SIGMASK);
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
-	return 0;
 }
 
 /*

From bb9c861ee1b94c97cd98c783a2b4c1cf53ff1712 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 24 Sep 2010 06:24:53 +0100
Subject: [PATCH 563/728] m32r: hole in shifting pc back

It's a userland pointer; worse, an untrustable one since ptrace
has just provided a chance to modify it.

X-Roothole-Covering-Cabal: TINRCC
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/kernel/signal.c | 38 +++++++++++++++++---------------------
 1 file changed, 17 insertions(+), 21 deletions(-)

diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index a56fcbd8abe6..7bbe38645ed5 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -251,6 +251,19 @@ give_sigsegv:
 	return -EFAULT;
 }
 
+static int prev_insn(struct pt_regs *regs)
+{
+	u16 inst;
+	if (get_user(&inst, (u16 __user *)(regs->bpc - 2)))
+		return -EFAULT;
+	if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
+		regs->bpc -= 2;
+	else
+		regs->bpc -= 4;
+	regs->syscall_nr = -1;
+	return 0;
+}
+
 /*
  * OK, we're invoking a handler
  */
@@ -259,8 +272,6 @@ static int
 handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 	      sigset_t *oldset, struct pt_regs *regs)
 {
-	unsigned short inst;
-
 	/* Are we from a system call? */
 	if (regs->syscall_nr >= 0) {
 		/* If so, check system call restarting.. */
@@ -278,12 +289,8 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				regs->r0 = regs->orig_r0;
-				inst = *(unsigned short *)(regs->bpc - 2);
-				if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
-					regs->bpc -= 2;
-				else
-					regs->bpc -= 4;
-				regs->syscall_nr = -1;
+				if (prev_insn(regs) < 0)
+					return -EFAULT;
 		}
 	}
 
@@ -310,7 +317,6 @@ static void do_signal(struct pt_regs *regs)
 	siginfo_t info;
 	int signr;
 	struct k_sigaction ka;
-	unsigned short inst;
 	sigset_t *oldset;
 
 	/*
@@ -353,21 +359,11 @@ static void do_signal(struct pt_regs *regs)
 		    regs->r0 == -ERESTARTSYS ||
 		    regs->r0 == -ERESTARTNOINTR) {
 			regs->r0 = regs->orig_r0;
-			inst = *(unsigned short *)(regs->bpc - 2);
-			if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
-				regs->bpc -= 2;
-			else
-				regs->bpc -= 4;
-			regs->syscall_nr = -1;
+			prev_insn(regs);
 		} else if (regs->r0 == -ERESTART_RESTARTBLOCK){
 			regs->r0 = regs->orig_r0;
 			regs->r7 = __NR_restart_syscall;
-			inst = *(unsigned short *)(regs->bpc - 2);
-			if ((inst & 0xfff0) == 0x10f0)	/* trap ? */
-				regs->bpc -= 2;
-			else
-				regs->bpc -= 4;
-			regs->syscall_nr = -1;
+			prev_insn(regs);
 		}
 	}
 	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {

From acdc0d5ef9dd74534fe8df77a2056fa1d911abe5 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri, 24 Sep 2010 06:25:34 +0100
Subject: [PATCH 564/728] m32r: fix breakage from "m32r: use generic
 ptrace_resume code"

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m32r/kernel/ptrace.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c
index e555091eb97c..0021ade4cba8 100644
--- a/arch/m32r/kernel/ptrace.c
+++ b/arch/m32r/kernel/ptrace.c
@@ -592,16 +592,17 @@ void user_enable_single_step(struct task_struct *child)
 
 	if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
 	    != sizeof(insn))
-		break;
+		return -EIO;
 
 	compute_next_pc(insn, pc, &next_pc, child);
 	if (next_pc & 0x80000000)
-		break;
+		return -EIO;
 
 	if (embed_debug_trap(child, next_pc))
-		break;
+		return -EIO;
 
 	invalidate_cache();
+	return 0;
 }
 
 void user_disable_single_step(struct task_struct *child)

From e92b05dec8865619ea2608c5c11a54b01467482f Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 24 Sep 2010 14:13:57 -0700
Subject: [PATCH 565/728] fremap: get rid of broken 'end' variable

Thomas Pollet points out that the 'end' variable is broken.  It was
computed based on start/size before they were page-aligned, and as such
doesn't actually match any of the other actions we take.  The overflow
test on end was also redundant, since we had already tested it with the
properly aligned version.

So just get rid of it entirely.  The one remaining use for that broken
variable can just use 'start+size' like all the other cases already did.

Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/fremap.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/mm/fremap.c b/mm/fremap.c
index 46f5dacf90a2..7b7f852848de 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -125,7 +125,6 @@ SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
 {
 	struct mm_struct *mm = current->mm;
 	struct address_space *mapping;
-	unsigned long end = start + size;
 	struct vm_area_struct *vma;
 	int err = -EINVAL;
 	int has_write_lock = 0;
@@ -168,7 +167,7 @@ SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
 	if (!(vma->vm_flags & VM_CAN_NONLINEAR))
 		goto out;
 
-	if (end <= start || start < vma->vm_start || end > vma->vm_end)
+	if (start < vma->vm_start || start + size > vma->vm_end)
 		goto out;
 
 	/* Must set VM_NONLINEAR before any pages are populated. */

From ea44e06e79a393fb577272399ef7521a143b6b59 Mon Sep 17 00:00:00 2001
From: Chris Metcalf <cmetcalf@tilera.com>
Date: Fri, 24 Sep 2010 17:19:20 -0400
Subject: [PATCH 566/728] arch/tile: remove dead code from intvec_32.S

This "bpt_code" instruction was killed off in our development line a while
ago (the actual definition of bpt_code that is used is in kernel/traps.c)
but I didn't push it for 2.6.36 because it seemed harmless and I didn't
want to try to push more than absolutely necessary.

However, we recently fixed a bug in our gcc that had been causing
"-gdwarf2" not to be passed to the assembler, and passing this flag causes
an erroneous assembler failure in the presence of code in a data section,
sometimes.  While we'd like to track down the bug in the assembler,
we'd also like to make sure 2.6.36 builds with the current toolchain,
so I'm removing this dead code as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
---
 arch/tile/kernel/intvec_32.S | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index 84f296ca9e63..8f58bdff20d7 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -1506,13 +1506,6 @@ handle_ill:
 	}
 	STD_ENDPROC(handle_ill)
 
-	.pushsection .rodata, "a"
-	.align  8
-bpt_code:
-	bpt
-	ENDPROC(bpt_code)
-	.popsection
-
 /* Various stub interrupt handlers and syscall handlers */
 
 STD_ENTRY_LOCAL(_kernel_double_fault)

From 4731fdcf6f7bdab3e369a3f844d4ea4d4017284d Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 24 Sep 2010 21:02:27 -0400
Subject: [PATCH 567/728] intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3
 boot hang

When the Lenovo Ideapad S10-3 is booted with HT enabled,
it hits a boot hang in the intel_idle driver.

This occurs when entering ATM-C4 for the first time,
unless BM_STS is first cleared.

acpi_idle doesn't see this because it first checks
and clears BM_STS, but it would hit the same hang
if that check were disabled.

http://bugs.meego.com/show_bug.cgi?id=7093
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/634702

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/pci/quirks.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 89ed181cd90c..857ae01734a6 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -162,6 +162,26 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_1,	quirk_isa_d
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_2,	quirk_isa_dma_hangs);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC,	PCI_DEVICE_ID_NEC_CBUS_3,	quirk_isa_dma_hangs);
 
+/*
+ * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear
+ * for some HT machines to use C4 w/o hanging.
+ */
+static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev)
+{
+	u32 pmbase;
+	u16 pm1a;
+
+	pci_read_config_dword(dev, 0x40, &pmbase);
+	pmbase = pmbase & 0xff80;
+	pm1a = inw(pmbase);
+
+	if (pm1a & 0x10) {
+		dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n");
+		outw(0x10, pmbase);
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts);
+
 /*
  *	Chipsets where PCI->PCI transfers vanish or hang
  */

From 979a281c34906fd905d6153ad999487b0c56f396 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Mon, 9 Aug 2010 03:55:09 +0200
Subject: [PATCH 568/728] ARM: pxa: Fix Vpac270 gpio_power for MMC

GPIO 0 is valid, yet this platform doesn't have any power GPIO for MMC.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/vpac270.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index c9b747cedea8..37d6173bbb66 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -240,6 +240,7 @@ static void __init vpac270_onenand_init(void) {}
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data vpac270_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= -1,
 	.gpio_card_detect	= GPIO53_VPAC270_SD_DETECT_N,
 	.gpio_card_ro		= GPIO52_VPAC270_SD_READONLY,
 	.detect_delay_ms	= 200,

From cf625368d3ad664c7c9ae89974599bbfe9947511 Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Sat, 14 Aug 2010 06:08:30 +0200
Subject: [PATCH 569/728] ARM: pxa: Use PIO for PI2C communication on Palm27x

Original idea by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/palm27x.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 77ad6d34ab5b..405b92a29793 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -469,9 +469,13 @@ static struct i2c_board_info __initdata palm27x_pi2c_board_info[] = {
 	},
 };
 
+static struct i2c_pxa_platform_data palm27x_i2c_power_info = {
+	.use_pio	= 1,
+};
+
 void __init palm27x_pmic_init(void)
 {
 	i2c_register_board_info(1, ARRAY_AND_SIZE(palm27x_pi2c_board_info));
-	pxa27x_set_i2c_power_info(NULL);
+	pxa27x_set_i2c_power_info(&palm27x_i2c_power_info);
 }
 #endif

From 32c4dad8f872fadb0ae3caa15d26e73934982217 Mon Sep 17 00:00:00 2001
From: "Mark F. Brown" <mark.brown314@gmail.com>
Date: Thu, 26 Aug 2010 05:07:29 -0400
Subject: [PATCH 570/728] ARM: pxa168: fix corrected reset vector

Reset vector for pxa168 is 0xffff_0000 not 0x0. This fix allows
reboot to work

Signed-off-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-mmp/include/mach/system.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
index 4f5b0e0ce6cf..1a8a25edb1b4 100644
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ b/arch/arm/mach-mmp/include/mach/system.h
@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_SYSTEM_H
 #define __ASM_MACH_SYSTEM_H
 
+#include <mach/cputype.h>
+
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
@@ -16,6 +18,9 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	if (cpu_is_pxa168())
+		cpu_reset(0xffff0000);
+	else
+		cpu_reset(0);
 }
 #endif /* __ASM_MACH_SYSTEM_H */

From cfc6a554d7a364997a43964b4b1290487f890447 Mon Sep 17 00:00:00 2001
From: Eric Miao <eric.miao@canonical.com>
Date: Tue, 7 Sep 2010 15:10:14 +0800
Subject: [PATCH 571/728] ARM: pxa: fix cpu_is_pxa*() not expanding to zero
 when not configured

When CONFIG_PXA3xx is not selected, cpu_is_pxa3xx() doesn't expand to
zero, which in some places doesn't result in correct optimization.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Reported-and-tested-by: Marek Vasut <marek.vasut@gmail.com>
---
 arch/arm/mach-pxa/include/mach/hardware.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 7f64d24cd564..b03650059d15 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -264,23 +264,35 @@
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
  * == 0x3 for pxa300/pxa310/pxa320
  */
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id <= 0x2;				\
 	 })
+#else
+#define __cpu_is_pxa2xx(id)	(0)
+#endif
 
+#ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)				\
 	({						\
 		unsigned int _id = (id) >> 13 & 0x7;	\
 		_id == 0x3;				\
 	 })
+#else
+#define __cpu_is_pxa3xx(id)	(0)
+#endif
 
+#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
 	 })
+#else
+#define __cpu_is_pxa93x(id)	(0)
+#endif
 
 #define cpu_is_pxa2xx()					\
 	({						\

From 07a5d146c80b7caa9e754b51f64d3fcbbc74e9c0 Mon Sep 17 00:00:00 2001
From: Haojian Zhuang <haojian.zhuang@gmail.com>
Date: Wed, 8 Sep 2010 09:42:39 -0400
Subject: [PATCH 572/728] ARM: pxa168fb: clear enable bit when not active

While fb isn't active, we should clear CFG_GRA_ENA bit. The existing code
can't clear this bit.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 drivers/video/pxa168fb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/pxa168fb.c b/drivers/video/pxa168fb.c
index 5d786bd3e304..a31a77ff6f3d 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/pxa168fb.c
@@ -298,8 +298,8 @@ static void set_dma_control0(struct pxa168fb_info *fbi)
 	 * Set bit to enable graphics DMA.
 	 */
 	x = readl(fbi->reg_base + LCD_SPU_DMA_CTRL0);
-	x |= fbi->active ? 0x00000100 : 0;
-	fbi->active = 0;
+	x &= ~CFG_GRA_ENA_MASK;
+	x |= fbi->active ? CFG_GRA_ENA(1) : CFG_GRA_ENA(0);
 
 	/*
 	 * If we are in a pseudo-color mode, we need to enable

From d42028060dfe1b9b65a387a849e82fd5c86359fb Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 11 Sep 2010 22:10:49 -0700
Subject: [PATCH 573/728] ARM: pxa: remove pr_<level> uses of KERN_<level>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/cpufreq-pxa2xx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 50d5939a78f1..58093d9e07be 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -312,8 +312,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	freqs.cpu = policy->cpu;
 
 	if (freq_debug)
-		pr_debug(KERN_INFO "Changing CPU frequency to %d Mhz, "
-			 "(SDRAM %d Mhz)\n",
+		pr_debug("Changing CPU frequency to %d Mhz, (SDRAM %d Mhz)\n",
 			 freqs.new / 1000, (pxa_freq_settings[idx].div2) ?
 			 (new_freq_mem / 2000) : (new_freq_mem / 1000));
 

From f281fb5fe54e15a7ab802945e42f8e24fceb56b2 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@nokia.com>
Date: Sat, 25 Sep 2010 12:42:55 +0200
Subject: [PATCH 574/728] block: prevent merges of discard and write requests

Add logic to prevent two I/O requests being merged if
only one of them is a discard.  Ditto secure discard.

Without this fix, it is possible for write requests
to transform into discard requests.  For example:

  Submit bio 1 to discard 8 sectors from sector n
  Submit bio 2 to write 8 sectors from sector n + 16
  Submit bio 3 to write 8 sectors from sector n + 8

Bio 1 becomes request 1.  Bio 2 becomes request 2.
Bio 3 is merged with request 2, and then subsequently
request 2 is merged with request 1 resulting in just
one I/O request which discards all 24 sectors.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>

(Moved the checks above the position checks /Jens)

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 block/blk-merge.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/block/blk-merge.c b/block/blk-merge.c
index 3b0cd4249671..eafc94f68d79 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -361,6 +361,18 @@ static int attempt_merge(struct request_queue *q, struct request *req,
 	if (!rq_mergeable(req) || !rq_mergeable(next))
 		return 0;
 
+	/*
+	 * Don't merge file system requests and discard requests
+	 */
+	if ((req->cmd_flags & REQ_DISCARD) != (next->cmd_flags & REQ_DISCARD))
+		return 0;
+
+	/*
+	 * Don't merge discard requests and secure discard requests
+	 */
+	if ((req->cmd_flags & REQ_SECURE) != (next->cmd_flags & REQ_SECURE))
+		return 0;
+
 	/*
 	 * not contiguous
 	 */

From f1a2481c0ad3aebd94d11b317c488deaadc25002 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Fri, 24 Sep 2010 07:18:22 +0100
Subject: [PATCH 575/728] ARM: 6407/1: mmu: Setup MT_MEMORY and
 MT_MEMORY_NONCACHED L1 entries

This patch populates the L1 entries for MT_MEMORY and MT_MEMORY_NONCACHED
types so that at boot-up, we can map memories outside system memory
at page level granularity

Previously the mapping was limiting to section level, which creates
unnecessary additional mapping for which physical memory may not
present. On the newer ARM with speculation, this is dangerous and can
result in untraceable aborts.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/mmu.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index a486bd0d97dc..6a3a2d0cd6db 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -247,6 +247,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -255,6 +258,9 @@ static struct mem_type mem_types[] = {
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_NONCACHED] = {
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+				L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -412,9 +418,12 @@ static void __init build_mem_type_table(void)
 	 * Enable CPU-specific coherency if supported.
 	 * (Only available on XSC3 at the moment.)
 	 */
-	if (arch_is_coherent() && cpu_is_xsc3())
+	if (arch_is_coherent() && cpu_is_xsc3()) {
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
-
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
+		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
+	}
 	/*
 	 * ARMv6 and above have extended page tables.
 	 */
@@ -439,7 +448,9 @@ static void __init build_mem_type_table(void)
 		mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S;
 		mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY].prot_pte |= L_PTE_SHARED;
 		mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S;
+		mem_types[MT_MEMORY_NONCACHED].prot_pte |= L_PTE_SHARED;
 #endif
 	}
 
@@ -476,6 +487,8 @@ static void __init build_mem_type_table(void)
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_MEMORY].prot_sect |= ecc_mask | cp->pmd;
+	mem_types[MT_MEMORY].prot_pte |= kern_pgprot;
+	mem_types[MT_MEMORY_NONCACHED].prot_sect |= ecc_mask;
 	mem_types[MT_ROM].prot_sect |= cp->pmd;
 
 	switch (cp->pmd) {

From e546f21b4b7af012d9f18edad6237339adfeb681 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Fri, 24 Sep 2010 07:19:49 +0100
Subject: [PATCH 576/728] ARM: 6408/1: omap: Map only available sram memory

Currently we map 1 MB section while setting up SRAM on OMAPs
Regardless of the actual memory. The physical OCM RAM available
on OMAP SOCs is in order of KBs. This patch maps only available
sram and cleans up some un-necessary cpu_is_xxx checks.

Mapping un-available or non-accessible(secure) memory on the newer ARM
processor is dangerous. Because ARM CPUs can now speculatively prefetch,
we should avoid mapping any no-existing or secure memory.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/sram.c | 25 +++++--------------------
 1 file changed, 5 insertions(+), 20 deletions(-)

diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 226b2e858d6c..10b3b4c63372 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -220,20 +220,7 @@ void __init omap_map_sram(void)
 	if (omap_sram_size == 0)
 		return;
 
-	if (cpu_is_omap24xx()) {
-		omap_sram_io_desc[0].virtual = OMAP2_SRAM_VA;
-
-		base = OMAP2_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-
 	if (cpu_is_omap34xx()) {
-		omap_sram_io_desc[0].virtual = OMAP3_SRAM_VA;
-		base = OMAP3_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-
 		/*
 		 * SRAM must be marked as non-cached on OMAP3 since the
 		 * CORE DPLL M2 divider change code (in SRAM) runs with the
@@ -244,13 +231,11 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
 	}
 
-	if (cpu_is_omap44xx()) {
-		omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
-		base = OMAP4_SRAM_PA;
-		base = ROUND_DOWN(base, PAGE_SIZE);
-		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
-	}
-	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
+	omap_sram_io_desc[0].virtual = omap_sram_base;
+	base = omap_sram_start;
+	base = ROUND_DOWN(base, PAGE_SIZE);
+	omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+	omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
 	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",

From 2de5c00ac06c8983ab33ad51a8341584f1cf42c3 Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Fri, 24 Sep 2010 07:21:05 +0100
Subject: [PATCH 577/728] ARM: 6409/1: davinci: map sram using
 MT_MEMORY_NONCACHED instead of MT_DEVICE

On Davinci SRAM is mapped as MT_DEVICE becasue of the section
mapping pre-requisite instead of intended MT_MEMORY_NONCACHED

Since the section mapping limitation gets fixed with first
patch in this series, the MT_MEMORY_NONCACHED can be used now.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-davinci/dm355.c  | 3 +--
 arch/arm/mach-davinci/dm365.c  | 3 +--
 arch/arm/mach-davinci/dm644x.c | 3 +--
 arch/arm/mach-davinci/dm646x.c | 3 +--
 4 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 3d996b659ff4..9be261beae7d 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -769,8 +769,7 @@ static struct map_desc dm355_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 6b6f4c643709..7781e35daec3 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -969,8 +969,7 @@ static struct map_desc dm365_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 40fec315c99a..5e5b0a7831fb 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -653,8 +653,7 @@ static struct map_desc dm644x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00008000),
 		.length		= SZ_16K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index e4a3df1872ac..26e8a9c7f50b 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -737,8 +737,7 @@ static struct map_desc dm646x_io_desc[] = {
 		.virtual	= SRAM_VIRT,
 		.pfn		= __phys_to_pfn(0x00010000),
 		.length		= SZ_32K,
-		/* MT_MEMORY_NONCACHED requires supersection alignment */
-		.type		= MT_DEVICE,
+		.type		= MT_MEMORY_NONCACHED,
 	},
 };
 

From e68d3b316ab7b02a074edc4f770e6a746390cb7d Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Sat, 25 Sep 2010 11:07:27 -0400
Subject: [PATCH 578/728] ALSA: sound/pci/rme9652: prevent reading
 uninitialized stack memory

The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and
SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow
unprivileged users to read uninitialized kernel stack memory, because
several fields of the hdsp{m}_config_info structs declared on the stack
are not altered or zeroed before being copied back to the user.  This
patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/rme9652/hdsp.c  | 1 +
 sound/pci/rme9652/hdspm.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/sound/pci/rme9652/hdsp.c b/sound/pci/rme9652/hdsp.c
index b92adef8e81e..d6fa7bfd9aa1 100644
--- a/sound/pci/rme9652/hdsp.c
+++ b/sound/pci/rme9652/hdsp.c
@@ -4609,6 +4609,7 @@ static int snd_hdsp_hwdep_ioctl(struct snd_hwdep *hw, struct file *file, unsigne
 		if (err < 0)
 			return err;
 
+		memset(&info, 0, sizeof(info));
 		spin_lock_irqsave(&hdsp->lock, flags);
 		info.pref_sync_ref = (unsigned char)hdsp_pref_sync_ref(hdsp);
 		info.wordclock_sync_check = (unsigned char)hdsp_wc_sync_check(hdsp);
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 547b713d7204..0c98ef9156d8 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -4127,6 +4127,7 @@ static int snd_hdspm_hwdep_ioctl(struct snd_hwdep * hw, struct file *file,
 
 	case SNDRV_HDSPM_IOCTL_GET_CONFIG_INFO:
 
+		memset(&info, 0, sizeof(info));
 		spin_lock_irq(&hdspm->lock);
 		info.pref_sync_ref = hdspm_pref_sync_ref(hdspm);
 		info.wordclock_sync_check = hdspm_wc_sync_check(hdspm);

From 5ec1055aa5632dd7a8283cdb5fa9be3c535eaa06 Mon Sep 17 00:00:00 2001
From: Larry Woodman <lwoodman@redhat.com>
Date: Fri, 24 Sep 2010 12:04:48 -0400
Subject: [PATCH 579/728] Avoid pgoff overflow in remap_file_pages

Thomas Pollet noticed that the remap_file_pages() system call in
fremap.c has a potential overflow in the first part of the if statement
below, which could cause it to process bogus input parameters.
Specifically the pgoff + size parameters could be wrap thereby
preventing the system call from failing when it should.

Reported-by: Thomas Pollet <thomas.pollet@gmail.com>
Signed-off-by: Larry Woodman <lwoodman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/fremap.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/mm/fremap.c b/mm/fremap.c
index 7b7f852848de..ec520c7b28df 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -141,6 +141,10 @@ SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
 	if (start + size <= start)
 		return err;
 
+	/* Does pgoff wrap? */
+	if (pgoff + (size >> PAGE_SHIFT) < pgoff)
+		return err;
+
 	/* Can we represent this offset inside this architecture's pte's? */
 #if PTE_FILE_MAX_BITS < BITS_PER_LONG
 	if (pgoff + (size >> PAGE_SHIFT) >= (1UL << PTE_FILE_MAX_BITS))

From 77edffb652b33a565e099ff0a1687762f03eb46a Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 25 Sep 2010 21:07:14 +0100
Subject: [PATCH 580/728] alpha: fix hae_cache race in RESTORE_ALL

We want interrupts disabled on all paths leading to RESTORE_ALL;
otherwise, we are risking an IRQ coming between the updates of
alpha_mv->hae_cache and *alpha_mv->hae_register and set_hae()
within the IRQ getting badly confused.

RESTORE_ALL used to play with disabling IRQ itself, but that got
removed back in 2002, without making sure we had them disabled
on all paths.  It's cheaper to make sure we have them disabled than
to revert to original variant...

Remove the detritus left from that commit back in 2002; we used to
need a reload of $0 and $1 since swpipl would change those, but
doing that had become pointless when we stopped doing swpipl in
there...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/entry.S | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index ab1ee0ab082b..d1273c1a1364 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -73,8 +73,6 @@
 	ldq	$20, HAE_REG($19);	\
 	stq	$21, HAE_CACHE($19);	\
 	stq	$21, 0($20);		\
-	ldq	$0, 0($sp);		\
-	ldq	$1, 8($sp);		\
 99:;					\
 	ldq	$19, 72($sp);		\
 	ldq	$20, 80($sp);		\
@@ -316,7 +314,7 @@ ret_from_sys_call:
 	cmovne	$26, 0, $19		/* $19 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
 	and	$0, 8, $0
-	beq	$0, restore_all
+	beq	$0, ret_to_kernel
 ret_to_user:
 	/* Make sure need_resched and sigpending don't change between
 		sampling and the rti.  */
@@ -329,6 +327,11 @@ restore_all:
 	RESTORE_ALL
 	call_pal PAL_rti
 
+ret_to_kernel:
+	lda	$16, 7
+	call_pal PAL_swpipl
+	br restore_all
+
 	.align 3
 $syscall_error:
 	/*
@@ -657,7 +660,7 @@ kernel_thread:
 	/* We don't actually care for a3 success widgetry in the kernel.
 	   Not for positive errno values.  */
 	stq	$0, 0($sp)		/* $0 */
-	br	restore_all
+	br	ret_to_kernel
 .end kernel_thread
 
 /*

From 32163f4b2cef28a5aab8b226ffecfc6379a53786 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat, 25 Sep 2010 21:07:51 +0100
Subject: [PATCH 581/728] alpha: fix usp value in multithreaded coredumps

rdusp() gives us the right value only for the current thread...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/process.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 842dba308eab..3ec35066f1dc 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -356,7 +356,7 @@ dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti)
 	dest[27] = pt->r27;
 	dest[28] = pt->r28;
 	dest[29] = pt->gp;
-	dest[30] = rdusp();
+	dest[30] = ti == current_thread_info() ? rdusp() : ti->pcb.usp;
 	dest[31] = pt->pc;
 
 	/* Once upon a time this was the PS value.  Which is stupid

From 40d24ff9b4309d37999bc0ae91a271f57651d9dd Mon Sep 17 00:00:00 2001
From: Rahul Ruikar <rahul.ruikar@gmail.com>
Date: Sun, 26 Sep 2010 17:00:29 +0530
Subject: [PATCH 582/728] pcmcia: pd6729: Fix error path

In error return path
call pci_disable_device() which was enabled earlier.

Signed-off-by: Rahul Ruikar <rahul.ruikar@gmail.com>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
---
 drivers/pcmcia/pd6729.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index b8a869af0f44..deef6656ab7b 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -646,7 +646,7 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev,
 	if (!pci_resource_start(dev, 0)) {
 		dev_warn(&dev->dev, "refusing to load the driver as the "
 			"io_base is NULL.\n");
-		goto err_out_free_mem;
+		goto err_out_disable;
 	}
 
 	dev_info(&dev->dev, "Cirrus PD6729 PCI to PCMCIA Bridge at 0x%llx "

From 245feaa61dbdabffafd47b973595e06abb1288f4 Mon Sep 17 00:00:00 2001
From: Chris Ball <cjb@laptop.org>
Date: Fri, 10 Sep 2010 12:05:24 -0400
Subject: [PATCH 583/728] mmc: MAINTAINERS: add myself as MMC maintainer

Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Pierre Ossman <pierre-list@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 MAINTAINERS | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index ceba39bc1b49..668682d1f5fa 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3925,8 +3925,10 @@ S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
@@ -5097,8 +5099,10 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:	Orphan
+M:	Chris Ball <cjb@laptop.org>
 L:	linux-mmc@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
+S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)

From 06fe577f841f383b2d4f743cfb74fac7f6468353 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Mon, 20 Sep 2010 15:03:42 +0200
Subject: [PATCH 584/728] mmc: sdhci-s3c: fix incorrect spinlock usage after
 merge

In the commit f522886e202a34a2191dd5d471b3c4d46410a9a0 a merge conflict
in the sdhci-s3c driver been fixed. However the fix used incorrect
spinlock operation - it caused a race with sdhci interrupt service. The
correct way to solve it is to use spin_lock_irqsave/irqrestore() calls.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/sdhci-s3c.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 71ad4163b95e..735d431f09e6 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -241,8 +241,10 @@ static struct sdhci_ops sdhci_s3c_ops = {
 static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
 {
 	struct sdhci_host *host = platform_get_drvdata(dev);
+	unsigned long flags;
+
 	if (host) {
-		spin_lock(&host->lock);
+		spin_lock_irqsave(&host->lock, flags);
 		if (state) {
 			dev_dbg(&dev->dev, "card inserted.\n");
 			host->flags &= ~SDHCI_DEVICE_DEAD;
@@ -253,7 +255,7 @@ static void sdhci_s3c_notify_change(struct platform_device *dev, int state)
 			host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 		}
 		tasklet_schedule(&host->card_tasklet);
-		spin_unlock(&host->lock);
+		spin_unlock_irqrestore(&host->lock, flags);
 	}
 }
 

From 9320f7cbbdd5febf013b0e91db29189724057738 Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Thu, 23 Sep 2010 16:22:05 +0200
Subject: [PATCH 585/728] mmc: sdhci-s3c: fix NULL ptr access in
 sdhci_s3c_remove

If not all clocks have been defined in platform data, the driver will
cause a null pointer dereference when it is removed. This patch fixes
this issue.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
---
 drivers/mmc/host/sdhci-s3c.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 735d431f09e6..aacb862ecc8a 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -483,8 +483,10 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev)
 	sdhci_remove_host(host, 1);
 
 	for (ptr = 0; ptr < 3; ptr++) {
-		clk_disable(sc->clk_bus[ptr]);
-		clk_put(sc->clk_bus[ptr]);
+		if (sc->clk_bus[ptr]) {
+			clk_disable(sc->clk_bus[ptr]);
+			clk_put(sc->clk_bus[ptr]);
+		}
 	}
 	clk_disable(sc->clk_io);
 	clk_put(sc->clk_io);

From f459ffbdfd04edb4a8ce6eea33170eb057a5e695 Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Sat, 25 Sep 2010 17:45:50 +1000
Subject: [PATCH 586/728] drm/radeon: fix PCI ID 5657 to be an RV410

fixes https://bugzilla.kernel.org/show_bug.cgi?id=19012

cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 include/drm/drm_pciids.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 3a9940ef728b..883c1d439899 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -85,7 +85,6 @@
 	{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
-	{0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5548, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5549, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x554A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R423|RADEON_NEW_MEMMAP}, \
@@ -103,6 +102,7 @@
 	{0x1002, 0x564F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
+	{0x1002, 0x5657, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_NEW_MEMMAP}, \
 	{0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \
 	{0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \
 	{0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \

From 73758a5d51280ca0613b8380fc07351f4d64f9c8 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Fri, 24 Sep 2010 14:59:32 -0400
Subject: [PATCH 587/728] drm/radeon/kms: fix up encoder info messages for DFP6

encoder info was not printed properly on boards using the
DFP6 id.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_display.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 127a395f70fb..7422f274615a 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -349,6 +349,8 @@ static void radeon_print_display_setup(struct drm_device *dev)
 					DRM_INFO("    DFP4: %s\n", encoder_names[radeon_encoder->encoder_id]);
 				if (devices & ATOM_DEVICE_DFP5_SUPPORT)
 					DRM_INFO("    DFP5: %s\n", encoder_names[radeon_encoder->encoder_id]);
+				if (devices & ATOM_DEVICE_DFP6_SUPPORT)
+					DRM_INFO("    DFP6: %s\n", encoder_names[radeon_encoder->encoder_id]);
 				if (devices & ATOM_DEVICE_TV1_SUPPORT)
 					DRM_INFO("    TV1: %s\n", encoder_names[radeon_encoder->encoder_id]);
 				if (devices & ATOM_DEVICE_CV_SUPPORT)

From c8da96e87d349e9035345293093ecc74792fb96a Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Sun, 26 Sep 2010 05:55:13 +0100
Subject: [PATCH 588/728] TOMOYO: Don't abuse sys_getpid(), sys_getppid()

System call entry functions sys_*() are never to be called from
general kernel code.  The fact that they aren't declared in header
files should have been a clue.  These functions also don't exist on
Alpha since it has sys_getxpid() instead.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/tomoyo/common.c | 6 +++++-
 security/tomoyo/common.h | 3 ---
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index ef43995119a4..c668b447c725 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -1416,15 +1416,19 @@ static char *tomoyo_print_header(struct tomoyo_request_info *r)
 	const pid_t gpid = task_pid_nr(current);
 	static const int tomoyo_buffer_len = 4096;
 	char *buffer = kmalloc(tomoyo_buffer_len, GFP_NOFS);
+	pid_t ppid;
 	if (!buffer)
 		return NULL;
 	do_gettimeofday(&tv);
+	rcu_read_lock();
+	ppid = task_tgid_vnr(current->real_parent);
+	rcu_read_unlock();
 	snprintf(buffer, tomoyo_buffer_len - 1,
 		 "#timestamp=%lu profile=%u mode=%s (global-pid=%u)"
 		 " task={ pid=%u ppid=%u uid=%u gid=%u euid=%u"
 		 " egid=%u suid=%u sgid=%u fsuid=%u fsgid=%u }",
 		 tv.tv_sec, r->profile, tomoyo_mode[r->mode], gpid,
-		 (pid_t) sys_getpid(), (pid_t) sys_getppid(),
+		 task_tgid_vnr(current), ppid,
 		 current_uid(), current_gid(), current_euid(),
 		 current_egid(), current_suid(), current_sgid(),
 		 current_fsuid(), current_fsgid());
diff --git a/security/tomoyo/common.h b/security/tomoyo/common.h
index 04454cb7b24a..7c66bd898782 100644
--- a/security/tomoyo/common.h
+++ b/security/tomoyo/common.h
@@ -689,9 +689,6 @@ struct tomoyo_profile {
 
 /********** Function prototypes. **********/
 
-extern asmlinkage long sys_getpid(void);
-extern asmlinkage long sys_getppid(void);
-
 /* Check whether the given string starts with the given keyword. */
 bool tomoyo_str_starts(char **src, const char *find);
 /* Get tomoyo_realpath() of current process. */

From c9e2fbd909c20b165b2b9ffb59f8b674cf0a55b0 Mon Sep 17 00:00:00 2001
From: Alexander Chumachenko <ledest@gmail.com>
Date: Thu, 1 Apr 2010 15:34:52 +0300
Subject: [PATCH 589/728] x86: Avoid 'constant_test_bit()' misoptimization due
 to cast to non-volatile

While debugging bit_spin_lock() hang, it was tracked down to gcc-4.4
misoptimization of non-inlined constant_test_bit() due to non-volatile
addr when 'const volatile unsigned long *addr' cast to 'unsigned long *'
with subsequent unconditional jump to pause (and not to the test) leading
to hang.

Compiling with gcc-4.3 or disabling CONFIG_OPTIMIZE_INLINING yields inlined
constant_test_bit() and correct jump, thus working around the kernel bug.

Other arches than asm-x86 may implement this slightly differently;
2.6.29 mitigates the misoptimization by changing the function prototype
(commit c4295fbb6048d85f0b41c5ced5cbf63f6811c46c) but probably fixing the issue
itself is better.

Signed-off-by: Alexander Chumachenko <ledest@gmail.com>
Signed-off-by: Michael Shigorin <mike@osdn.org.ua>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/bitops.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 545776efeb16..bafd80defa43 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -309,7 +309,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr)
 static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr)
 {
 	return ((1UL << (nr % BITS_PER_LONG)) &
-		(((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0;
+		(addr[nr / BITS_PER_LONG])) != 0;
 }
 
 static inline int variable_test_bit(int nr, volatile const unsigned long *addr)

From 00740c58541b6087d78418cebca1fcb86dc6077d Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Sun, 26 Sep 2010 12:42:23 +0200
Subject: [PATCH 590/728] amd64_edac: Fix driver module removal

f4347553b30ec66530bfe63c84530afea3803396 removed the edac polling
mechanism in favor of using a notifier chain for conveying MCE
information to edac. However, the module removal path didn't test
whether the driver had setup the polling function workqueue at all and
the rmmod process was hanging in the kernel at try_to_del_timer_sync()
in the cancel_delayed_work() path, trying to cancel an uninitialized
work struct.

Fix that by adding a balancing check to the workqueue removal path.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 drivers/edac/edac_mc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index 3630308e7b81..6b21e25f7a84 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -339,6 +339,9 @@ static void edac_mc_workq_teardown(struct mem_ctl_info *mci)
 {
 	int status;
 
+	if (mci->op_state != OP_RUNNING_POLL)
+		return;
+
 	status = cancel_delayed_work(&mci->work);
 	if (status == 0) {
 		debugf0("%s() not canceled, flush the queue\n",

From 1d6400c7c9cfd38976b25d55b357200ad3ff1be9 Mon Sep 17 00:00:00 2001
From: Davidlohr Bueso <dave@gnu.org>
Date: Mon, 13 Sep 2010 15:53:18 +0000
Subject: [PATCH 591/728] net/9p: fix memory handling/allocation in
 rdma_request()

Return -ENOMEM when erroring on kmalloc and fix memory leaks when returning on error.

Signed-off-by: Davidlohr Bueso <dave@gnu.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
---
 net/9p/trans_rdma.c | 29 ++++++++++++++++++-----------
 1 file changed, 18 insertions(+), 11 deletions(-)

diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 0ea20c30466c..17c5ba7551a5 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -426,8 +426,10 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
 
 	/* Allocate an fcall for the reply */
 	rpl_context = kmalloc(sizeof *rpl_context, GFP_KERNEL);
-	if (!rpl_context)
+	if (!rpl_context) {
+		err = -ENOMEM;
 		goto err_close;
+	}
 
 	/*
 	 * If the request has a buffer, steal it, otherwise
@@ -445,8 +447,8 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
 	}
 	rpl_context->rc = req->rc;
 	if (!rpl_context->rc) {
-		kfree(rpl_context);
-		goto err_close;
+		err = -ENOMEM;
+		goto err_free2;
 	}
 
 	/*
@@ -458,11 +460,8 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
 	 */
 	if (atomic_inc_return(&rdma->rq_count) <= rdma->rq_depth) {
 		err = post_recv(client, rpl_context);
-		if (err) {
-			kfree(rpl_context->rc);
-			kfree(rpl_context);
-			goto err_close;
-		}
+		if (err)
+			goto err_free1;
 	} else
 		atomic_dec(&rdma->rq_count);
 
@@ -471,8 +470,10 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
 
 	/* Post the request */
 	c = kmalloc(sizeof *c, GFP_KERNEL);
-	if (!c)
-		goto err_close;
+	if (!c) {
+		err = -ENOMEM;
+		goto err_free1;
+	}
 	c->req = req;
 
 	c->busa = ib_dma_map_single(rdma->cm_id->device,
@@ -499,9 +500,15 @@ static int rdma_request(struct p9_client *client, struct p9_req_t *req)
 	return ib_post_send(rdma->qp, &wr, &bad_wr);
 
  error:
+	kfree(c);
+	kfree(rpl_context->rc);
+	kfree(rpl_context);
 	P9_DPRINTK(P9_DEBUG_ERROR, "EIO\n");
 	return -EIO;
-
+ err_free1:
+	kfree(rpl_context->rc);
+ err_free2:
+	kfree(rpl_context);
  err_close:
 	spin_lock_irqsave(&rdma->req_lock, flags);
 	if (rdma->state < P9_RDMA_CLOSING) {

From 2de59fea8b3095d1df4c729fda041625930aab4f Mon Sep 17 00:00:00 2001
From: Will Deacon <will.deacon@arm.com>
Date: Mon, 27 Sep 2010 14:55:15 +0100
Subject: [PATCH 592/728] ARM: 6411/1: vexpress: set RAM latencies to 1 cycle
 for PL310 on ct-ca9x4 tile

The PL310 on the ct-ca9x4 tile for the Versatile Express does not need
to add additional latency when accessing its cache RAMs. Unfortunately,
the boot monitor sets this up for an 8-cycle delay on reads and writes,
resulting in greatly reduced memory performance when the L2 cache is
enabled.

This patch sets the L2 RAM latencies to the correct value of 1 cycle
on the ct-ca9x4 tile before enabling the L2 cache.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-vexpress/ct-ca9x4.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 1c9c13e9d074..efb127022d42 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -227,7 +227,13 @@ static void ct_ca9x4_init(void)
 	int i;
 
 #ifdef CONFIG_CACHE_L2X0
-	l2x0_init(MMIO_P2V(CT_CA9X4_L2CC), 0x00400000, 0xfe0fffff);
+	void __iomem *l2x0_base = MMIO_P2V(CT_CA9X4_L2CC);
+
+	/* set RAM latencies to 1 cycle for this core tile. */
+	writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+	writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+	l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
 #endif
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));

From bec658ff31453a5726b1c188674d587a5d40c482 Mon Sep 17 00:00:00 2001
From: Steve Wise <swise@opengridcomputing.com>
Date: Sat, 18 Sep 2010 19:38:21 -0500
Subject: [PATCH 593/728] RDMA/cxgb3: Turn off RX coalescing for iWARP
 connections

The HW by default has RX coalescing on.  For iWARP connections, this
causes a 100ms delay in connection establishement due to the ingress
MPA Start message being stalled in HW.  So explicitly turn RX
coalescing off when setting up iWARP connections.

This was causing very bad performance for NP64 gather operations using
Open MPI, due to the way it sets up connections on larger jobs.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/cxgb3/iwch_cm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index d88077a21994..13c88871dc3b 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -463,7 +463,8 @@ static int send_connect(struct iwch_ep *ep)
 	    V_MSS_IDX(mtu_idx) |
 	    V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx);
 	opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10);
-	opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor);
+	opt2 = F_RX_COALESCE_VALID | V_RX_COALESCE(0) | V_FLAVORS_VALID(1) |
+	       V_CONG_CONTROL_FLAVOR(cong_flavor);
 	skb->priority = CPL_PRIORITY_SETUP;
 	set_arp_failure_handler(skb, act_open_req_arp_failure);
 
@@ -1280,7 +1281,8 @@ static void accept_cr(struct iwch_ep *ep, __be32 peer_ip, struct sk_buff *skb)
 	    V_MSS_IDX(mtu_idx) |
 	    V_L2T_IDX(ep->l2t->idx) | V_TX_CHANNEL(ep->l2t->smt_idx);
 	opt0l = V_TOS((ep->tos >> 2) & M_TOS) | V_RCV_BUFSIZ(rcv_win>>10);
-	opt2 = V_FLAVORS_VALID(1) | V_CONG_CONTROL_FLAVOR(cong_flavor);
+	opt2 = F_RX_COALESCE_VALID | V_RX_COALESCE(0) | V_FLAVORS_VALID(1) |
+	       V_CONG_CONTROL_FLAVOR(cong_flavor);
 
 	rpl = cplhdr(skb);
 	rpl->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));

From d270ae34eb77c58dea60e5b1e300a698d2ce39ac Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Mon, 27 Sep 2010 10:35:44 -0700
Subject: [PATCH 594/728] drm/i915: fix GMCH power reporting

The IPS driver needs to know the current power consumption of the GMCH
in order to make decisions about when to increase or decrease the CPU
and/or GPU power envelope.  So fix up the divisions to save the results
so the numbers are actually correct (contrary to some earlier comments
and code, these functions do not modify the first argument and use it
for the result).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_dma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 9d67b4853030..c74e4e8006d4 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1787,9 +1787,9 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
 		}
 	}
 
-	div_u64(diff, diff1);
+	diff = div_u64(diff, diff1);
 	ret = ((m * diff) + c);
-	div_u64(ret, 10);
+	ret = div_u64(ret, 10);
 
 	dev_priv->last_count1 = total_count;
 	dev_priv->last_time1 = now;
@@ -1858,7 +1858,7 @@ void i915_update_gfx_val(struct drm_i915_private *dev_priv)
 
 	/* More magic constants... */
 	diff = diff * 1181;
-	div_u64(diff, diffms * 10);
+	diff = div_u64(diff, diffms * 10);
 	dev_priv->gfx_power = diff;
 }
 

From c52c2ddc1dfa6fe85ffd5e4c57cf91f6982639fe Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:28:12 +0100
Subject: [PATCH 595/728] alpha: switch osf_sigprocmask() to use of
 sigprocmask()

get rid of a useless wrapper, while we are at it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/entry.S   |  9 --------
 arch/alpha/kernel/signal.c  | 46 ++++++++-----------------------------
 arch/alpha/kernel/systbls.S |  2 +-
 3 files changed, 11 insertions(+), 46 deletions(-)

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index d1273c1a1364..6d159cee5f2f 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -914,15 +914,6 @@ sys_execve:
 	jmp	$31, do_sys_execve
 .end sys_execve
 
-	.align	4
-	.globl	osf_sigprocmask
-	.ent	osf_sigprocmask
-osf_sigprocmask:
-	.prologue 0
-	mov	$sp, $18
-	jmp	$31, sys_osf_sigprocmask
-.end osf_sigprocmask
-
 	.align	4
 	.globl	alpha_ni_syscall
 	.ent	alpha_ni_syscall
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 0f6b51ae865a..06609aa363b6 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -41,46 +41,20 @@ static void do_signal(struct pt_regs *, struct switch_stack *,
 /*
  * The OSF/1 sigprocmask calling sequence is different from the
  * C sigprocmask() sequence..
- *
- * how:
- * 1 - SIG_BLOCK
- * 2 - SIG_UNBLOCK
- * 3 - SIG_SETMASK
- *
- * We change the range to -1 .. 1 in order to let gcc easily
- * use the conditional move instructions.
- *
- * Note that we don't need to acquire the kernel lock for SMP
- * operation, as all of this is local to this thread.
  */
-SYSCALL_DEFINE3(osf_sigprocmask, int, how, unsigned long, newmask,
-		struct pt_regs *, regs)
+SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
 {
-	unsigned long oldmask = -EINVAL;
+	sigset_t oldmask;
+	sigset_t mask;
+	unsigned long res;
 
-	if ((unsigned long)how-1 <= 2) {
-		long sign = how-2;		/* -1 .. 1 */
-		unsigned long block, unblock;
-
-		newmask &= _BLOCKABLE;
-		spin_lock_irq(&current->sighand->siglock);
-		oldmask = current->blocked.sig[0];
-
-		unblock = oldmask & ~newmask;
-		block = oldmask | newmask;
-		if (!sign)
-			block = unblock;
-		if (sign <= 0)
-			newmask = block;
-		if (_NSIG_WORDS > 1 && sign > 0)
-			sigemptyset(&current->blocked);
-		current->blocked.sig[0] = newmask;
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-
-		regs->r0 = 0;		/* special no error return */
+	siginitset(&mask, newmask & ~_BLOCKABLE);
+	res = siprocmask(how, &mask, &oldmask);
+	if (!res) {
+		force_successful_syscall_return();
+		res = oldmask->sig[0];
 	}
-	return oldmask;
+	return res;
 }
 
 SYSCALL_DEFINE3(osf_sigaction, int, sig,
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index ce594ef533cc..a6a1de9db16f 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -58,7 +58,7 @@ sys_call_table:
 	.quad sys_open				/* 45 */
 	.quad alpha_ni_syscall
 	.quad sys_getxgid
-	.quad osf_sigprocmask
+	.quad sys_osf_sigprocmask
 	.quad alpha_ni_syscall
 	.quad alpha_ni_syscall			/* 50 */
 	.quad sys_acct

From 18e6bfa96d4d810ad9a69e17f08e0d0089379f22 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:28:22 +0100
Subject: [PATCH 596/728] alpha: __get_user/__put_user results need to be
 checked...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/signal.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 06609aa363b6..779780a332d3 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -68,9 +68,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
 		old_sigset_t mask;
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
 			return -EFAULT;
-		__get_user(mask, &act->sa_mask);
 		siginitset(&new_ka.sa.sa_mask, mask);
 		new_ka.ka_restorer = NULL;
 	}
@@ -80,9 +80,9 @@ SYSCALL_DEFINE3(osf_sigaction, int, sig,
 	if (!ret && oact) {
 		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
 		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
 			return -EFAULT;
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
 	}
 
 	return ret;

From e46924d246e028c94689087db0699438343a344e Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:28:32 +0100
Subject: [PATCH 597/728] mn10300: avoid SIGSEGV delivery loop

force_sigsegv() is there for purpose...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 717db14c2cc3..57178a8d5af0 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -345,7 +345,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 }
 
@@ -428,7 +428,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	return 0;
 
 give_sigsegv:
-	force_sig(SIGSEGV, current);
+	force_sigsegv(sig, current);
 	return -EFAULT;
 }
 

From 00cbf6080c7d60b999864afcd9010e0bbc7c5db6 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:28:42 +0100
Subject: [PATCH 598/728] mn10300: prevent double syscall restarts

set ->orig_d0 to -1, same as what sigreturn does

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/signal.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 57178a8d5af0..4ef99256fa49 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -432,6 +432,12 @@ give_sigsegv:
 	return -EFAULT;
 }
 
+static inline void stepback(struct pt_regs *regs)
+{
+	regs->pc -= 2;
+	regs->orig_d0 = -1;
+}
+
 /*
  * handle the actual delivery of a signal to userspace
  */
@@ -459,7 +465,7 @@ static int handle_signal(int sig,
 			/* fallthrough */
 		case -ERESTARTNOINTR:
 			regs->d0 = regs->orig_d0;
-			regs->pc -= 2;
+			stepback(regs);
 		}
 	}
 
@@ -527,12 +533,12 @@ static void do_signal(struct pt_regs *regs)
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
 			regs->d0 = regs->orig_d0;
-			regs->pc -= 2;
+			stepback(regs);
 			break;
 
 		case -ERESTART_RESTARTBLOCK:
 			regs->d0 = __NR_restart_syscall;
-			regs->pc -= 2;
+			stepback(regs);
 			break;
 		}
 	}

From c05628b49b19187841d635dddd3e47caab33242b Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:28:52 +0100
Subject: [PATCH 599/728] mn10300: ->restart_block.fn needs to be reset on
 sigreturn

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/signal.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 4ef99256fa49..5a2c0040b166 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -102,6 +102,9 @@ static int restore_sigcontext(struct pt_regs *regs,
 {
 	unsigned int err = 0;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	if (is_using_fpu(current))
 		fpu_kill_state(current);
 

From 8e87354d01b3046aa5e1080419178191f3dce8f0 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:29:02 +0100
Subject: [PATCH 600/728] mn10300: get rid of set_fs(USER_DS) in sigframe setup

It really has no business being there; short of a serious kernel bug
we should already have USER_DS at that point.  It shouldn't have been
done on x86 either...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/signal.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index 5a2c0040b166..ae36480b450f 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -333,8 +333,6 @@ static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
 	regs->d0 = sig;
 	regs->d1 = (unsigned long) &frame->sc;
 
-	set_fs(USER_DS);
-
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
@@ -416,8 +414,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->d0 = sig;
 	regs->d1 = (long) &frame->info;
 
-	set_fs(USER_DS);
-
 	/* the tracer may want to single-step inside the handler */
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);

From 60bdb72e3c2e808228612f672bd8d18e82872de3 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ftp.linux.org.uk>
Date: Sun, 26 Sep 2010 19:29:12 +0100
Subject: [PATCH 601/728] mn10300: check __get_user/__put_user results...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/kernel/signal.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index ae36480b450f..d4de05ab7864 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -65,10 +65,10 @@ asmlinkage long sys_sigaction(int sig,
 		old_sigset_t mask;
 		if (verify_area(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
+		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) ||
+		    __get_user(new_ka.sa.sa_flags, &act->sa_flags) ||
+		    __get_user(mask, &act->sa_mask))
 			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
 		siginitset(&new_ka.sa.sa_mask, mask);
 	}
 
@@ -77,10 +77,10 @@ asmlinkage long sys_sigaction(int sig,
 	if (!ret && oact) {
 		if (verify_area(VERIFY_WRITE, oact, sizeof(*oact)) ||
 		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
+		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) ||
+		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags) ||
+		    __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask))
 			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
 	}
 
 	return ret;

From cc33e54290ed845904dac4b047934207738f0205 Mon Sep 17 00:00:00 2001
From: Bernhard Walle <walle@corscience.de>
Date: Mon, 27 Sep 2010 12:55:16 +0200
Subject: [PATCH 602/728] i2c-octeon: Return -ETIMEDOUT in octeon_i2c_wait() on
 timeout

It doesn't make sense to set result to -ETIMEDOUT but return 0 (success)
afterwards. Since there's code in octeon_i2c_start() to handle the
error, it should be called.

Signed-off-by: Bernhard Walle <walle@corscience.de>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-octeon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 0e9f85d0a835..56dbe54e8811 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -218,7 +218,7 @@ static int octeon_i2c_wait(struct octeon_i2c *i2c)
 		return result;
 	} else if (result == 0) {
 		dev_dbg(i2c->dev, "%s: timeout\n", __func__);
-		result = -ETIMEDOUT;
+		return -ETIMEDOUT;
 	}
 
 	return 0;

From 4bba0fd8d1c6d405df666e2573e1a1f917098be0 Mon Sep 17 00:00:00 2001
From: Jon Povey <jon.povey@racelogic.co.uk>
Date: Fri, 17 Sep 2010 12:02:11 +0900
Subject: [PATCH 603/728] i2c-davinci: Fix race when setting up for TX

When setting up to transmit, a race exists between the ISR and
i2c_davinci_xfer_msg() trying to load the first byte and adjust counters.
This is mostly visible for transmits > 1 byte long.

The hardware starts sending immediately that MDR is loaded. IMR trickery
doesn't work because if we start sending, finish the first byte and an
XRDY event occurs before we load IMR to unmask it, we never get an
interrupt, and we timeout.

Move the MDR load after DXR,IMR loads to avoid this race without locking.

Tested on DM355 connected to Techwell TW2836 and Wolfson WM8985

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-davinci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 2222c87876b9..b8feac5f2ef4 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -357,9 +357,6 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 
 	dev->terminate = 0;
 
-	/* write the data into mode register */
-	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
-
 	/*
 	 * First byte should be set here, not after interrupt,
 	 * because transmit-data-ready interrupt can come before
@@ -371,6 +368,9 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 		dev->buf_len--;
 	}
 
+	/* write the data into mode register; start transmitting */
+	davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
+
 	r = wait_for_completion_interruptible_timeout(&dev->cmd_complete,
 						      dev->adapter.timeout);
 	if (r == 0) {

From 31dfbc93923c0aaa0440b809f80ff2830c6a531a Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Mon, 27 Sep 2010 21:28:30 +0100
Subject: [PATCH 604/728] drm: Prune GEM vma entries

Hook the GEM vm open/close ops into the generic drm vm open/close so
that the private vma entries are created and destroy appropriately.
Fixes the leak of the drm_vma_entries during the lifetime of the filp.

Reported-by: Matt Mackall <mpm@selenic.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_gem.c |  9 ++++++++-
 drivers/gpu/drm/drm_vm.c  | 32 ++++++++++++++++++++------------
 include/drm/drmP.h        |  1 +
 3 files changed, 29 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index bf92d07510df..6fe2cd298c12 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -528,6 +528,10 @@ void drm_gem_vm_open(struct vm_area_struct *vma)
 	struct drm_gem_object *obj = vma->vm_private_data;
 
 	drm_gem_object_reference(obj);
+
+	mutex_lock(&obj->dev->struct_mutex);
+	drm_vm_open_locked(vma);
+	mutex_unlock(&obj->dev->struct_mutex);
 }
 EXPORT_SYMBOL(drm_gem_vm_open);
 
@@ -535,7 +539,10 @@ void drm_gem_vm_close(struct vm_area_struct *vma)
 {
 	struct drm_gem_object *obj = vma->vm_private_data;
 
-	drm_gem_object_unreference_unlocked(obj);
+	mutex_lock(&obj->dev->struct_mutex);
+	drm_vm_close_locked(vma);
+	drm_gem_object_unreference(obj);
+	mutex_unlock(&obj->dev->struct_mutex);
 }
 EXPORT_SYMBOL(drm_gem_vm_close);
 
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index fda67468e603..5df450683aab 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -433,6 +433,25 @@ static void drm_vm_open(struct vm_area_struct *vma)
 	mutex_unlock(&dev->struct_mutex);
 }
 
+void drm_vm_close_locked(struct vm_area_struct *vma)
+{
+	struct drm_file *priv = vma->vm_file->private_data;
+	struct drm_device *dev = priv->minor->dev;
+	struct drm_vma_entry *pt, *temp;
+
+	DRM_DEBUG("0x%08lx,0x%08lx\n",
+		  vma->vm_start, vma->vm_end - vma->vm_start);
+	atomic_dec(&dev->vma_count);
+
+	list_for_each_entry_safe(pt, temp, &dev->vmalist, head) {
+		if (pt->vma == vma) {
+			list_del(&pt->head);
+			kfree(pt);
+			break;
+		}
+	}
+}
+
 /**
  * \c close method for all virtual memory types.
  *
@@ -445,20 +464,9 @@ static void drm_vm_close(struct vm_area_struct *vma)
 {
 	struct drm_file *priv = vma->vm_file->private_data;
 	struct drm_device *dev = priv->minor->dev;
-	struct drm_vma_entry *pt, *temp;
-
-	DRM_DEBUG("0x%08lx,0x%08lx\n",
-		  vma->vm_start, vma->vm_end - vma->vm_start);
-	atomic_dec(&dev->vma_count);
 
 	mutex_lock(&dev->struct_mutex);
-	list_for_each_entry_safe(pt, temp, &dev->vmalist, head) {
-		if (pt->vma == vma) {
-			list_del(&pt->head);
-			kfree(pt);
-			break;
-		}
-	}
+	drm_vm_close_locked(vma);
 	mutex_unlock(&dev->struct_mutex);
 }
 
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 7809d230adee..774e1d49509b 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -1175,6 +1175,7 @@ extern int drm_release(struct inode *inode, struct file *filp);
 extern int drm_mmap(struct file *filp, struct vm_area_struct *vma);
 extern int drm_mmap_locked(struct file *filp, struct vm_area_struct *vma);
 extern void drm_vm_open_locked(struct vm_area_struct *vma);
+extern void drm_vm_close_locked(struct vm_area_struct *vma);
 extern resource_size_t drm_core_get_map_ofs(struct drm_local_map * map);
 extern resource_size_t drm_core_get_reg_ofs(struct drm_device *dev);
 extern unsigned int drm_poll(struct file *filp, struct poll_table_struct *wait);

From e488459a0e131acc9e14df093cfee740bc431953 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Mon, 27 Sep 2010 10:57:10 -0400
Subject: [PATCH 605/728] drm/radeon/kms: fix potential segfault in
 r600_ioctl_wait_idle

radeon_gem_wait_idle_ioctl can apparently get called prior to
the vram page being set up or even if accel if false, so make
sure it's valid before using it.

Should fix:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597636
https://bugs.freedesktop.org/show_bug.cgi?id=29834

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r600.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index ddc3adea1dda..7a04959ba0ee 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3528,7 +3528,8 @@ void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
 	/* r7xx hw bug.  write to HDP_DEBUG1 followed by fb read
 	 * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
 	 */
-	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+	    rdev->vram_scratch.ptr) {
 		void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
 		u32 tmp;
 

From f36fce0f49ed40f3e843d45fa53d476d63444b58 Mon Sep 17 00:00:00 2001
From: Alex Deucher <alexdeucher@gmail.com>
Date: Mon, 27 Sep 2010 11:33:00 -0400
Subject: [PATCH 606/728] drm/radeon/kms: add quirk for MSI K9A2GM motherboard

Board has no digital connectors

Reported-by: Andy Walls <awalls@md.metrocast.net>
Tested-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_atombios.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index ebae14c4b768..68932ba7b8a4 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -317,6 +317,15 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 			*connector_type = DRM_MODE_CONNECTOR_DVID;
 	}
 
+	/* MSI K9A2GM V2/V3 board has no HDMI or DVI */
+	if ((dev->pdev->device == 0x796e) &&
+	    (dev->pdev->subsystem_vendor == 0x1462) &&
+	    (dev->pdev->subsystem_device == 0x7302)) {
+		if ((supported_device == ATOM_DEVICE_DFP2_SUPPORT) ||
+		    (supported_device == ATOM_DEVICE_DFP3_SUPPORT))
+			return false;
+	}
+
 	/* a-bit f-i90hd - ciaranm on #radeonhd - this board has no DVI */
 	if ((dev->pdev->device == 0x7941) &&
 	    (dev->pdev->subsystem_vendor == 0x147b) &&

From 95929eff2cb01e9858779283795f4e3943ee020d Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 27 Sep 2010 13:12:33 +0100
Subject: [PATCH 607/728] MN10300: Default config choice GDBSTUB_TTYSM0 should
 be GDBSTUB_ON_TTYSM0

The configuration choice for the port on which the GDB stub listens has
a default of GDBSTUB_TTYSM0, but this should be GDBSTUB_ON_TTYSM0 to
match the option.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mn10300/Kconfig.debug b/arch/mn10300/Kconfig.debug
index ff80e86b9bd2..ce83c74b3fd7 100644
--- a/arch/mn10300/Kconfig.debug
+++ b/arch/mn10300/Kconfig.debug
@@ -101,7 +101,7 @@ config GDBSTUB_DEBUG_BREAKPOINT
 
 choice
 	prompt "GDB stub port"
-	default GDBSTUB_TTYSM0
+	default GDBSTUB_ON_TTYSM0
 	depends on GDBSTUB
 	help
 	  Select the serial port used for GDB-stub.

From 252a52aa4fa22a668f019e55b3aac3ff71ec1c29 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Mon, 27 Sep 2010 12:30:28 -0400
Subject: [PATCH 608/728] Fix pktcdvd ioctl dev_minor range check

The PKT_CTRL_CMD_STATUS device ioctl retrieves a pointer to a
pktcdvd_device from the global pkt_devs array.  The index into this
array is provided directly by the user and is a signed integer, so the
comparison to ensure that it falls within the bounds of this array will
fail when provided with a negative index.

This can be used to read arbitrary kernel memory or cause a crash due to
an invalid pointer dereference.  This can be exploited by users with
permission to open /dev/pktcdvd/control (on many distributions, this is
readable by group "cdrom").

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
[ Rather than add a cast, just make the function take the right type -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/pktcdvd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index b1cbeb59bb76..37a2bb595076 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -2369,7 +2369,7 @@ static void pkt_release_dev(struct pktcdvd_device *pd, int flush)
 	pkt_shrink_pktlist(pd);
 }
 
-static struct pktcdvd_device *pkt_find_dev_from_minor(int dev_minor)
+static struct pktcdvd_device *pkt_find_dev_from_minor(unsigned int dev_minor)
 {
 	if (dev_minor >= MAX_WRITERS)
 		return NULL;

From fff2017354a3a9906862aabbf2a1cae5b4330e40 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Mon, 27 Sep 2010 18:01:49 -0700
Subject: [PATCH 609/728] hwmon (coretemp): Fix build breakage if SMP is
 undefined

Commit e40cc4bdfd4b89813f072f72bd9c7055814d3f0f introduced
a build breakage if CONFIG_SMP is undefined. This commit
fixes the problem.

This fix is only a workaround. For a real fix, cpu_sibling_mask() should
be defined in UP include code, eg in linux/smp.h, and asm/smp.h should not be
included directly. This fix is currently not possible because asm/smp.h defines
cpu_sibling_mask() unconditionally and is included directly from many source
files.

Reported-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
---
 drivers/hwmon/coretemp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index baa842a80b4b..a23b17a78ace 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -36,6 +36,7 @@
 #include <linux/pci.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
+#include <asm/smp.h>
 
 #define DRVNAME	"coretemp"
 

From fad16e7a7f67eef8d33f8ad58850db89382b09ce Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Tue, 21 Sep 2010 09:25:48 +0200
Subject: [PATCH 610/728] ahci: fix module refcount breakage introduced by
 libahci split

libata depends on scsi_host_template for module reference counting and
sht's should be owned by each low level driver.  During libahci split,
the sht was left with libahci.ko leaving the actual low level drivers
not reference counted.  This made ahci and ahci_platform always
unloadable even while they're being actively used.

Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for
each low level ahci driver.

stable: only applicable to 2.6.35.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c          |  4 ++++
 drivers/ata/ahci.h          | 12 +++++++++++-
 drivers/ata/ahci_platform.c |  6 +++++-
 drivers/ata/libahci.c       | 16 ++++------------
 4 files changed, 24 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ff1c945fba98..99d0e5a51148 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -90,6 +90,10 @@ static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
 static int ahci_pci_device_resume(struct pci_dev *pdev);
 #endif
 
+static struct scsi_host_template ahci_sht = {
+	AHCI_SHT("ahci"),
+};
+
 static struct ata_port_operations ahci_vt8251_ops = {
 	.inherits		= &ahci_ops,
 	.hardreset		= ahci_vt8251_hardreset,
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 474427b6f99f..e5fdeebf9ef0 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -298,7 +298,17 @@ struct ahci_host_priv {
 
 extern int ahci_ignore_sss;
 
-extern struct scsi_host_template ahci_sht;
+extern struct device_attribute *ahci_shost_attrs[];
+extern struct device_attribute *ahci_sdev_attrs[];
+
+#define AHCI_SHT(drv_name)						\
+	ATA_NCQ_SHT(drv_name),						\
+	.can_queue		= AHCI_MAX_CMDS - 1,			\
+	.sg_tablesize		= AHCI_MAX_SG,				\
+	.dma_boundary		= AHCI_DMA_BOUNDARY,			\
+	.shost_attrs		= ahci_shost_attrs,			\
+	.sdev_attrs		= ahci_sdev_attrs
+
 extern struct ata_port_operations ahci_ops;
 
 void ahci_save_initial_config(struct device *dev,
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 4e97f33cca44..84b643270e7a 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,10 @@
 #include <linux/ahci_platform.h>
 #include "ahci.h"
 
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT("ahci_platform"),
+};
+
 static int __init ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -145,7 +149,7 @@ static int __init ahci_probe(struct platform_device *pdev)
 	ahci_print_info(host, "platform");
 
 	rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
-			       &ahci_sht);
+			       &ahci_platform_sht);
 	if (rc)
 		goto err0;
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 68dc6785472f..8eea309ea212 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -121,7 +121,7 @@ static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
 static DEVICE_ATTR(em_buffer, S_IWUSR | S_IRUGO,
 		   ahci_read_em_buffer, ahci_store_em_buffer);
 
-static struct device_attribute *ahci_shost_attrs[] = {
+struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_link_power_management_policy,
 	&dev_attr_em_message_type,
 	&dev_attr_em_message,
@@ -132,22 +132,14 @@ static struct device_attribute *ahci_shost_attrs[] = {
 	&dev_attr_em_buffer,
 	NULL
 };
+EXPORT_SYMBOL_GPL(ahci_shost_attrs);
 
-static struct device_attribute *ahci_sdev_attrs[] = {
+struct device_attribute *ahci_sdev_attrs[] = {
 	&dev_attr_sw_activity,
 	&dev_attr_unload_heads,
 	NULL
 };
-
-struct scsi_host_template ahci_sht = {
-	ATA_NCQ_SHT("ahci"),
-	.can_queue		= AHCI_MAX_CMDS - 1,
-	.sg_tablesize		= AHCI_MAX_SG,
-	.dma_boundary		= AHCI_DMA_BOUNDARY,
-	.shost_attrs		= ahci_shost_attrs,
-	.sdev_attrs		= ahci_sdev_attrs,
-};
-EXPORT_SYMBOL_GPL(ahci_sht);
+EXPORT_SYMBOL_GPL(ahci_sdev_attrs);
 
 struct ata_port_operations ahci_ops = {
 	.inherits		= &sata_pmp_port_ops,

From 5591bf07225523600450edd9e6ad258bb877b779 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Tue, 28 Sep 2010 14:18:20 -0400
Subject: [PATCH 611/728] ALSA: prevent heap corruption in snd_ctl_new()

The snd_ctl_new() function in sound/core/control.c allocates space for a
snd_kcontrol struct by performing arithmetic operations on a
user-provided size without checking for integer overflow.  If a user
provides a large enough size, an overflow will occur, the allocated
chunk will be too small, and a second user-influenced value will be
written repeatedly past the bounds of this chunk.  This code is
reachable by unprivileged users who have permission to open
a /dev/snd/controlC* device (on many distros, this is group "audio") via
the SNDRV_CTL_IOCTL_ELEM_ADD and SNDRV_CTL_IOCTL_ELEM_REPLACE ioctls.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/core/control.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/core/control.c b/sound/core/control.c
index 070aab490191..45a818002d99 100644
--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -31,6 +31,7 @@
 
 /* max number of user-defined controls */
 #define MAX_USER_CONTROLS	32
+#define MAX_CONTROL_COUNT	1028
 
 struct snd_kctl_ioctl {
 	struct list_head list;		/* list of all ioctls */
@@ -195,6 +196,10 @@ static struct snd_kcontrol *snd_ctl_new(struct snd_kcontrol *control,
 	
 	if (snd_BUG_ON(!control || !control->count))
 		return NULL;
+
+	if (control->count > MAX_CONTROL_COUNT)
+		return NULL;
+
 	kctl = kzalloc(sizeof(*kctl) + sizeof(struct snd_kcontrol_volatile) * control->count, GFP_KERNEL);
 	if (kctl == NULL) {
 		snd_printk(KERN_ERR "Cannot allocate control instance\n");

From 573b638158029898caf9470c8214b7ddd29751e3 Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Mon, 2 Aug 2010 15:14:43 +0000
Subject: [PATCH 612/728] ACPI: enable repeated PCIEXP wakeup by clearing
 PCIEXP_WAKE_STS on resume

Section 4.7.3.1.1 (PM1 Status Registers) of version 4.0 of
the ACPI spec concerning PCIEXP_WAKE_STS points out in
in the final note field in table 4-11 that if this bit is
set to 1 and the system is put into a sleeping state then
the system will not automatically wake.

This bit gets set by hardware to indicate that the system
woke up due to a PCI Express wakeup event, so clear it during
acpi_hw_clear_acpi_status() calls to enable subsequent
resumes to work.

BugLink: http://bugs.launchpad.net/bugs/613381

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/aclocal.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index df85b53a674f..7dad9160f209 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -854,6 +854,7 @@ struct acpi_bit_register_info {
 	ACPI_BITMASK_POWER_BUTTON_STATUS   | \
 	ACPI_BITMASK_SLEEP_BUTTON_STATUS   | \
 	ACPI_BITMASK_RT_CLOCK_STATUS       | \
+	ACPI_BITMASK_PCIEXP_WAKE_DISABLE   | \
 	ACPI_BITMASK_WAKE_STATUS)
 
 #define ACPI_BITMASK_TIMER_ENABLE               0x0001

From 0f44fbd297e1cda5d9ecc9f5321a86fe647c7d4a Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 28 Sep 2010 13:26:57 -0700
Subject: [PATCH 613/728] alpha: fix compile problem in
 arch/alpha/kernel/signal.c

Tssk.  Apparently Al hadn't checked commit c52c2ddc1dfa ("alpha: switch
osf_sigprocmask() to use of sigprocmask()") at all. It doesn't compile.

Fixed as per suggestions from Michael Cree.

Reported-by: Michael Cree <mcree@orcon.net.nz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/signal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 779780a332d3..d290845aef59 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -49,10 +49,10 @@ SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
 	unsigned long res;
 
 	siginitset(&mask, newmask & ~_BLOCKABLE);
-	res = siprocmask(how, &mask, &oldmask);
+	res = sigprocmask(how, &mask, &oldmask);
 	if (!res) {
 		force_successful_syscall_return();
-		res = oldmask->sig[0];
+		res = oldmask.sig[0];
 	}
 	return res;
 }

From 64a32307b710c100beb101e9c78f8022f0e8ba61 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Sep 2010 17:20:20 -0400
Subject: [PATCH 614/728] ACPI: delete ZEPTO idle=nomwait DMI quirk

per comments in the bug report, this entry
seems to hurt at much as it helps.

https://bugzilla.kernel.org/show_bug.cgi?id=10807

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_core.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e9699aaed109..b618f888d66b 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -28,12 +28,6 @@ static int set_no_mwait(const struct dmi_system_id *id)
 }
 
 static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
-	{
-	set_no_mwait, "IFL91 board", {
-	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"),
-	DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"),
-	DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL},
 	{
 	set_no_mwait, "Extensa 5220", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),

From bbb7030fbb6469c46974c4736a5f90d12102f299 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Sep 2010 17:48:49 -0400
Subject: [PATCH 615/728] ACPI: expand Vista blacklist to include SP1 and SP2

When we claim incompatibility with Vista,
include both Vista SP1 and SP2.

https://bugzilla.kernel.org/show_bug.cgi?id=12641

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/blacklist.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 2bb28b9d91c4..3eda6c040400 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -183,6 +183,8 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d)
 {
 	printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
 	acpi_osi_setup("!Windows 2006");
+	acpi_osi_setup("!Windows 2006 SP1");
+	acpi_osi_setup("!Windows 2006 SP2");
 	return 0;
 }
 static int __init dmi_disable_osi_win7(const struct dmi_system_id *d)

From 7a1d602f5fc35d14907b7da98d5627acb69589d1 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Sep 2010 17:51:51 -0400
Subject: [PATCH 616/728] ACPI: EC: add Vista incompatibility DMI entry for
 Toshiba Satellite L355

https://bugzilla.kernel.org/show_bug.cgi?id=12641

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/blacklist.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 3eda6c040400..571a003a1f7c 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -228,6 +228,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		},
 	},
 	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "Toshiba Satellite L355",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		     DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"),
+		},
+	},
+	{
 	.callback = dmi_disable_osi_win7,
 	.ident = "ASUS K50IJ",
 	.matches = {

From d900329e20f4476db6461752accebcf7935a8055 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@linux.intel.com>
Date: Tue, 28 Sep 2010 15:35:01 -0700
Subject: [PATCH 617/728] x86, cpu: After uncapping CPUID, re-run CPU feature
 detection

After uncapping the CPUID level, we need to also re-run the CPU
feature detection code.

This resolves kernel bugzilla 16322.

Reported-by: boris64 <bugzilla.kernel.org@boris64.net>
Cc: <stable@kernel.org> v2.6.29..2.6.35
LKML-Reference: <tip-@git.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/common.c | 2 +-
 arch/x86/kernel/cpu/cpu.h    | 1 +
 arch/x86/kernel/cpu/intel.c  | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 490dac63c2d2..f2f9ac7da25c 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -545,7 +545,7 @@ void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
 	}
 }
 
-static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
+void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
 {
 	u32 tfms, xlvl;
 	u32 ebx;
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index 3624e8a0f71b..f668bb1f7d43 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -33,5 +33,6 @@ extern const struct cpu_dev *const __x86_cpu_dev_start[],
 			    *const __x86_cpu_dev_end[];
 
 extern void cpu_detect_cache_sizes(struct cpuinfo_x86 *c);
+extern void get_cpu_cap(struct cpuinfo_x86 *c);
 
 #endif
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 85f69cdeae10..b4389441efbb 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -39,6 +39,7 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 			misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
 			wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
 			c->cpuid_level = cpuid_eax(0);
+			get_cpu_cap(c);
 		}
 	}
 

From 62bdb288bf464862a2801b2e53aadc6c4d100fab Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 29 Sep 2010 01:57:02 +0100
Subject: [PATCH 618/728] MN10300: Handle missing sys_cacheflush() when caching
 disabled

When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.

Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/mm/Makefile         | 14 ++++++--------
 arch/mn10300/mm/cache-disabled.c | 21 +++++++++++++++++++++
 2 files changed, 27 insertions(+), 8 deletions(-)
 create mode 100644 arch/mn10300/mm/cache-disabled.c

diff --git a/arch/mn10300/mm/Makefile b/arch/mn10300/mm/Makefile
index 28b9d983db0c..1557277fbc5c 100644
--- a/arch/mn10300/mm/Makefile
+++ b/arch/mn10300/mm/Makefile
@@ -2,13 +2,11 @@
 # Makefile for the MN10300-specific memory management code
 #
 
+cacheflush-y	:= cache.o cache-mn10300.o
+cacheflush-$(CONFIG_MN10300_CACHE_WBACK) += cache-flush-mn10300.o
+
+cacheflush-$(CONFIG_MN10300_CACHE_DISABLED) := cache-disabled.o
+
 obj-y := \
 	init.o fault.o pgtable.o extable.o tlb-mn10300.o mmu-context.o \
-	misalignment.o dma-alloc.o
-
-ifneq ($(CONFIG_MN10300_CACHE_DISABLED),y)
-obj-y	+= cache.o cache-mn10300.o
-ifeq ($(CONFIG_MN10300_CACHE_WBACK),y)
-obj-y	+= cache-flush-mn10300.o
-endif
-endif
+	misalignment.o dma-alloc.o $(cacheflush-y)
diff --git a/arch/mn10300/mm/cache-disabled.c b/arch/mn10300/mm/cache-disabled.c
new file mode 100644
index 000000000000..f669ea42aba6
--- /dev/null
+++ b/arch/mn10300/mm/cache-disabled.c
@@ -0,0 +1,21 @@
+/* Handle the cache being disabled
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#include <linux/mm.h>
+
+/*
+ * allow userspace to flush the instruction cache
+ */
+asmlinkage long sys_cacheflush(unsigned long start, unsigned long end)
+{
+	if (end < start)
+		return -EINVAL;
+	return 0;
+}

From 899611ee7d373e5eeda08e9a8632684e1ebbbf00 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 28 Sep 2010 18:01:22 -0700
Subject: [PATCH 619/728] Linux 2.6.36-rc6

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 3133a5772eeb..471c49fd2f43 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

From ec652b351f48ed4cd6796181fbb41759ff88cc0a Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Mon, 30 Aug 2010 14:08:02 +0800
Subject: [PATCH 620/728] ACPI: fix build warnings resulting from merge window
 conflict

drivers/acpi/sysfs.c:154: warning: passing argument 1 of '__check_old_set_param' from incompatible pointer type
include/linux/moduleparam.h:165: note: expected 'int (*)(const char *, struct kernel_param *)' but argument is of type 'int (*)(const char *, const struct kernel_param *)'

Introduced by commit 1c8fce27e275fd7c6b75bc6455745f02d3903ee6 ("ACPI:
introduce drivers/acpi/sysfs.c") interacting with commit
9bbb9e5a33109b2832e2e63dcc7a132924ab374b ("param: use ops in struct
kernel_param, rather than get and set fns directly").

Use module_param_cb instead of the obsoleted module_param_call to fix a build warning.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/sysfs.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c
index 68e2e4582fa2..f8588f81048a 100644
--- a/drivers/acpi/sysfs.c
+++ b/drivers/acpi/sysfs.c
@@ -100,7 +100,7 @@ static const struct acpi_dlevel acpi_debug_levels[] = {
 	ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
 };
 
-static int param_get_debug_layer(char *buffer, struct kernel_param *kp)
+static int param_get_debug_layer(char *buffer, const struct kernel_param *kp)
 {
 	int result = 0;
 	int i;
@@ -128,7 +128,7 @@ static int param_get_debug_layer(char *buffer, struct kernel_param *kp)
 	return result;
 }
 
-static int param_get_debug_level(char *buffer, struct kernel_param *kp)
+static int param_get_debug_level(char *buffer, const struct kernel_param *kp)
 {
 	int result = 0;
 	int i;
@@ -149,10 +149,18 @@ static int param_get_debug_level(char *buffer, struct kernel_param *kp)
 	return result;
 }
 
-module_param_call(debug_layer, param_set_uint, param_get_debug_layer,
-		  &acpi_dbg_layer, 0644);
-module_param_call(debug_level, param_set_uint, param_get_debug_level,
-		  &acpi_dbg_level, 0644);
+static struct kernel_param_ops param_ops_debug_layer = {
+	.set = param_set_uint,
+	.get = param_get_debug_layer,
+};
+
+static struct kernel_param_ops param_ops_debug_level = {
+	.set = param_set_uint,
+	.get = param_get_debug_level,
+};
+
+module_param_cb(debug_layer, &param_ops_debug_layer, &acpi_dbg_layer, 0644);
+module_param_cb(debug_level, &param_ops_debug_level, &acpi_dbg_level, 0644);
 
 static char trace_method_name[6];
 module_param_string(trace_method_name, trace_method_name, 6, 0644);

From e9f74c489c9d4209946c04f29e7a724cb5537206 Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Fri, 3 Sep 2010 10:08:50 +0800
Subject: [PATCH 621/728] ACPI video: fix a poor warning message

Fix a vague warning message.

https://bugzilla.kernel.org/show_bug.cgi?id=16599

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/video_detect.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c
index c5fef01b3c95..b83676126598 100644
--- a/drivers/acpi/video_detect.c
+++ b/drivers/acpi/video_detect.c
@@ -59,8 +59,8 @@ acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context,
 				  "support\n"));
 		*cap |= ACPI_VIDEO_BACKLIGHT;
 		if (ACPI_FAILURE(acpi_get_handle(handle, "_BQC", &h_dummy)))
-			printk(KERN_WARNING FW_BUG PREFIX "ACPI brightness "
-					"control misses _BQC function\n");
+			printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, "
+				"cannot determine initial brightness\n");
 		/* We have backlight support, no need to scan further */
 		return AE_CTRL_TERMINATE;
 	}

From 58f87ed0d45141a90167f34c0959d607160a26df Mon Sep 17 00:00:00 2001
From: Lucas De Marchi <lucas.de.marchi@gmail.com>
Date: Tue, 7 Sep 2010 12:49:45 -0400
Subject: [PATCH 622/728] ACPI: Fix typos

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/acpica/exutils.c    | 2 +-
 drivers/acpi/acpica/rsutils.c    | 2 +-
 drivers/acpi/apei/Kconfig        | 2 +-
 drivers/acpi/apei/erst-dbg.c     | 2 +-
 drivers/acpi/apei/erst.c         | 2 +-
 drivers/acpi/bus.c               | 4 ++--
 drivers/acpi/processor_perflib.c | 4 ++--
 include/acpi/acpixf.h            | 2 +-
 8 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index 74c24d517f81..4093522eed45 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -109,7 +109,7 @@ void acpi_ex_enter_interpreter(void)
  *
  * DESCRIPTION: Reacquire the interpreter execution region from within the
  *              interpreter code. Failure to enter the interpreter region is a
- *              fatal system error. Used in  conjuction with
+ *              fatal system error. Used in  conjunction with
  *              relinquish_interpreter
  *
  ******************************************************************************/
diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c
index 22cfcfbd9fff..491191e6cf69 100644
--- a/drivers/acpi/acpica/rsutils.c
+++ b/drivers/acpi/acpica/rsutils.c
@@ -149,7 +149,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type)
 
 			/*
 			 * 16-, 32-, and 64-bit cases must use the move macros that perform
-			 * endian conversion and/or accomodate hardware that cannot perform
+			 * endian conversion and/or accommodate hardware that cannot perform
 			 * misaligned memory transfers
 			 */
 		case ACPI_RSC_MOVE16:
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index 907e350f1c7d..fca34ccfd294 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -34,6 +34,6 @@ config ACPI_APEI_ERST_DEBUG
 	depends on ACPI_APEI
 	help
 	  ERST is a way provided by APEI to save and retrieve hardware
-	  error infomation to and from a persistent store. Enable this
+	  error information to and from a persistent store. Enable this
 	  if you want to debugging and testing the ERST kernel support
 	  and firmware implementation.
diff --git a/drivers/acpi/apei/erst-dbg.c b/drivers/acpi/apei/erst-dbg.c
index 5281ddda2777..98ffa2991ebc 100644
--- a/drivers/acpi/apei/erst-dbg.c
+++ b/drivers/acpi/apei/erst-dbg.c
@@ -2,7 +2,7 @@
  * APEI Error Record Serialization Table debug support
  *
  * ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store. This file provide the
+ * information to and from a persistent store. This file provide the
  * debugging/testing support for ERST kernel support and firmware
  * implementation.
  *
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 18645f4e83cd..a4904f1680cf 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -2,7 +2,7 @@
  * APEI Error Record Serialization Table support
  *
  * ERST is a way provided by APEI to save and retrieve hardware error
- * infomation to and from a persistent store.
+ * information to and from a persistent store.
  *
  * For more information about ERST, please refer to ACPI Specification
  * version 4.0, section 17.4.
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 5c221ab535d5..cc17b352d1c5 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -55,7 +55,7 @@ EXPORT_SYMBOL(acpi_root_dir);
 static int set_power_nocheck(const struct dmi_system_id *id)
 {
 	printk(KERN_NOTICE PREFIX "%s detected - "
-		"disable power check in power transistion\n", id->ident);
+		"disable power check in power transition\n", id->ident);
 	acpi_power_nocheck = 1;
 	return 0;
 }
@@ -1027,7 +1027,7 @@ static int __init acpi_init(void)
 
 	/*
 	 * If the laptop falls into the DMI check table, the power state check
-	 * will be disabled in the course of device power transistion.
+	 * will be disabled in the course of device power transition.
 	 */
 	dmi_check_system(power_nocheck_dmi_table);
 
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index ba1bd263d903..3a73a93596e8 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -447,8 +447,8 @@ int acpi_processor_notify_smm(struct module *calling_module)
 	if (!try_module_get(calling_module))
 		return -EINVAL;
 
-	/* is_done is set to negative if an error occured,
-	 * and to postitive if _no_ error occured, but SMM
+	/* is_done is set to negative if an error occurred,
+	 * and to postitive if _no_ error occurred, but SMM
 	 * was already notified. This avoids double notification
 	 * which might lead to unexpected results...
 	 */
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index c0786d446a00..984cdc62e30b 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -55,7 +55,7 @@
 extern u8 acpi_gbl_permanent_mmap;
 
 /*
- * Globals that are publically available, allowing for
+ * Globals that are publicly available, allowing for
  * run time configuration
  */
 extern u32 acpi_dbg_level;

From bd126b23a2f30c3c7d268db2b96866923eb732a5 Mon Sep 17 00:00:00 2001
From: Namhyung Kim <namhyung@gmail.com>
Date: Sun, 8 Aug 2010 02:17:29 +0900
Subject: [PATCH 623/728] ACPI: add missing __percpu markup in
 arch/x86/kernel/acpi/cstate.c

cpu_cstate_entry is a percpu pointer
but was missing __percpu markup.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/x86/kernel/acpi/cstate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index fb7a5f052e2b..fb16f17e59be 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -61,7 +61,7 @@ struct cstate_entry {
 		unsigned int ecx;
 	} states[ACPI_PROCESSOR_MAX_POWER];
 };
-static struct cstate_entry *cpu_cstate_entry;	/* per CPU ptr */
+static struct cstate_entry __percpu *cpu_cstate_entry;	/* per CPU ptr */
 
 static short mwait_supported[ACPI_PROCESSOR_MAX_POWER];
 

From 25cb1bfdd8256cd1c614947e1696e42176ac22ec Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Wed, 18 Aug 2010 15:22:10 +0200
Subject: [PATCH 624/728] ACPI: Kconfig: fix typo.

"power of" -> "power off"

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b811f2173f6f..88681aca88c5 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -105,7 +105,7 @@ config ACPI_EC_DEBUGFS
 
 	  Be aware that using this interface can confuse your Embedded
 	  Controller in a way that a normal reboot is not enough. You then
-	  have to power of your system, and remove the laptop battery for
+	  have to power off your system, and remove the laptop battery for
 	  some seconds.
 	  An Embedded Controller typically is available on laptops and reads
 	  sensor values like battery state and temperature.

From 337279ce3aa85d81d34c0f837d1c204df105103b Mon Sep 17 00:00:00 2001
From: Zhang Rui <rui.zhang@intel.com>
Date: Tue, 28 Sep 2010 22:48:55 -0400
Subject: [PATCH 625/728] ACPI: Disable Windows Vista compatibility for Toshiba
 P305D

Disable the Windows Vista (SP1) compatibility for Toshiba P305D.

http://bugzilla.kernel.org/show_bug.cgi?id=14736

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/blacklist.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c
index 571a003a1f7c..f7619600270a 100644
--- a/drivers/acpi/blacklist.c
+++ b/drivers/acpi/blacklist.c
@@ -243,6 +243,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"),
 		},
 	},
+	{
+	.callback = dmi_disable_osi_vista,
+	.ident = "Toshiba P305D",
+	.matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"),
+		},
+	},
 
 	/*
 	 * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.

From 20e3341bb138bc9860adea4d76707470357b76ab Mon Sep 17 00:00:00 2001
From: Lucas De Marchi <lucas.de.marchi@gmail.com>
Date: Tue, 7 Sep 2010 12:53:49 -0400
Subject: [PATCH 626/728] cpuidle: Fix typos

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/cpuidle/governors/menu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c
index c2408bbe9c2e..f508690eb958 100644
--- a/drivers/cpuidle/governors/menu.c
+++ b/drivers/cpuidle/governors/menu.c
@@ -80,7 +80,7 @@
  * Limiting Performance Impact
  * ---------------------------
  * C states, especially those with large exit latencies, can have a real
- * noticable impact on workloads, which is not acceptable for most sysadmins,
+ * noticeable impact on workloads, which is not acceptable for most sysadmins,
  * and in addition, less performance has a power price of its own.
  *
  * As a general rule of thumb, menu assumes that the following heuristic

From 68f160125f0655c21a1c9f896ddff97d98012cb0 Mon Sep 17 00:00:00 2001
From: Thomas Weber <weber@corscience.de>
Date: Mon, 12 Jul 2010 08:56:43 +0200
Subject: [PATCH 627/728] intel_idle: Change mode 755 => 644

Remove execution permission from source file.

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/idle/intel_idle.c | 0
 1 file changed, 0 insertions(+), 0 deletions(-)
 mode change 100755 => 100644 drivers/idle/intel_idle.c

diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
old mode 100755
new mode 100644

From 3265eba0bed7645cacd5e2cb3614d504b5ac29e6 Mon Sep 17 00:00:00 2001
From: Namhyung Kim <namhyung@gmail.com>
Date: Sun, 8 Aug 2010 03:10:03 +0900
Subject: [PATCH 628/728] intel_idle: add missing __percpu markup

intel_idle_cpuidle_devices is a percpu pointer
but was missing __percpu markup.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/idle/intel_idle.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index a10152bb1427..96bf38097996 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -83,7 +83,7 @@ static unsigned int mwait_substates;
 /* Reliable LAPIC Timer States, bit 1 for C1 etc.  */
 static unsigned int lapic_timer_reliable_states;
 
-static struct cpuidle_device *intel_idle_cpuidle_devices;
+static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
 static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state);
 
 static struct cpuidle_state *cpuidle_state_table;

From e9a64ed4994db04c9963495b03d8a86538e3ad55 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Fri, 24 Sep 2010 20:50:02 -0400
Subject: [PATCH 629/728] acpi_idle: add missing \n to printk

otherwise, these two lines print as one:

ACPI: acpi_idle yielding to intel_idle
ACPI: SSDT 3f5d8741 00203 (v02 PmRef  Cpu0Ist 00003000 INTL 20050624)

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_driver.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 156021892389..347eb21b2353 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -850,7 +850,7 @@ static int __init acpi_processor_init(void)
 		printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n",
 			acpi_idle_driver.name);
 	} else {
-		printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s",
+		printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n",
 			cpuidle_get_driver()->name);
 	}
 

From c9d66d3515bbb0ad8062721487de7ade02d2b936 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Mon, 16 Aug 2010 20:26:51 +0100
Subject: [PATCH 630/728] mfd: Ignore non-GPIO IRQs when setting wm831x IRQ
 types

The driver was originally tested with an additional patch which
made this unneeded but that patch had issuges and got lost on the
way to mainline, causing problems when the errors are reported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Cc: stable@kernel.org
---
 drivers/mfd/wm831x-irq.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
index 7dabe4dbd373..294183b6260b 100644
--- a/drivers/mfd/wm831x-irq.c
+++ b/drivers/mfd/wm831x-irq.c
@@ -394,8 +394,13 @@ static int wm831x_irq_set_type(unsigned int irq, unsigned int type)
 
 	irq = irq - wm831x->irq_base;
 
-	if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11)
-		return -EINVAL;
+	if (irq < WM831X_IRQ_GPIO_1 || irq > WM831X_IRQ_GPIO_11) {
+		/* Ignore internal-only IRQs */
+		if (irq >= 0 && irq < WM831X_NUM_IRQS)
+			return 0;
+		else
+			return -EINVAL;
+	}
 
 	switch (type) {
 	case IRQ_TYPE_EDGE_BOTH:

From 90182317a9e383474613aa60e9d61d57bdf17c3e Mon Sep 17 00:00:00 2001
From: Kevin Liu <kliu5@marvell.com>
Date: Wed, 8 Sep 2010 09:44:36 -0400
Subject: [PATCH 631/728] mfd: Fix max8925 irq control bit incorrect setting

In max8925_irq_sync_unlock(), irq control bit is set at the same time.
Zero means enabling irq, and one means disabling irq.

The original code is:
	irq_chg[0] &= irq_data->enable;

It should be changed to:
	irq_chg[0] &= ~irq_data->enable;

Otherwise, irq control bit is mess.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---
 drivers/mfd/max8925-core.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c
index 04028a9ee082..428377a5a6f5 100644
--- a/drivers/mfd/max8925-core.c
+++ b/drivers/mfd/max8925-core.c
@@ -429,24 +429,25 @@ static void max8925_irq_sync_unlock(unsigned int irq)
 	irq_tsc = cache_tsc;
 	for (i = 0; i < ARRAY_SIZE(max8925_irqs); i++) {
 		irq_data = &max8925_irqs[i];
+		/* 1 -- disable, 0 -- enable */
 		switch (irq_data->mask_reg) {
 		case MAX8925_CHG_IRQ1_MASK:
-			irq_chg[0] &= irq_data->enable;
+			irq_chg[0] &= ~irq_data->enable;
 			break;
 		case MAX8925_CHG_IRQ2_MASK:
-			irq_chg[1] &= irq_data->enable;
+			irq_chg[1] &= ~irq_data->enable;
 			break;
 		case MAX8925_ON_OFF_IRQ1_MASK:
-			irq_on[0] &= irq_data->enable;
+			irq_on[0] &= ~irq_data->enable;
 			break;
 		case MAX8925_ON_OFF_IRQ2_MASK:
-			irq_on[1] &= irq_data->enable;
+			irq_on[1] &= ~irq_data->enable;
 			break;
 		case MAX8925_RTC_IRQ_MASK:
-			irq_rtc &= irq_data->enable;
+			irq_rtc &= ~irq_data->enable;
 			break;
 		case MAX8925_TSC_IRQ_MASK:
-			irq_tsc &= irq_data->enable;
+			irq_tsc &= ~irq_data->enable;
 			break;
 		default:
 			dev_err(chip->dev, "wrong IRQ\n");

From 80168676ebfe4af51407d30f336d67f082d45201 Mon Sep 17 00:00:00 2001
From: Dave Chinner <dchinner@redhat.com>
Date: Fri, 24 Sep 2010 18:13:44 +1000
Subject: [PATCH 632/728] xfs: force background CIL push under sustained load

I have been seeing occasional pauses in transaction throughput up to
30s long under heavy parallel workloads. The only notable thing was
that the xfsaild was trying to be active during the pauses, but
making no progress. It was running exactly 20 times a second (on the
50ms no-progress backoff), and the number of pushbuf events was
constant across this time as well.  IOWs, the xfsaild appeared to be
stuck on buffers that it could not push out.

Further investigation indicated that it was trying to push out inode
buffers that were pinned and/or locked. The xfsbufd was also getting
woken at the same frequency (by the xfsaild, no doubt) to push out
delayed write buffers. The xfsbufd was not making any progress
because all the buffers in the delwri queue were pinned. This scan-
and-make-no-progress dance went one in the trace for some seconds,
before the xfssyncd came along an issued a log force, and then
things started going again.

However, I noticed something strange about the log force - there
were way too many IO's issued. 516 log buffers were written, to be
exact. That added up to 129MB of log IO, which got me very
interested because it's almost exactly 25% of the size of the log.
He delayed logging code is suppose to aggregate the minimum of 25%
of the log or 8MB worth of changes before flushing. That's what
really puzzled me - why did a log force write 129MB instead of only
8MB?

Essentially what has happened is that no CIL pushes had occurred
since the previous tail push which cleared out 25% of the log space.
That caused all the new transactions to block because there wasn't
log space for them, but they kick the xfsaild to push the tail.
However, the xfsaild was not making progress because there were
buffers it could not lock and flush, and the xfsbufd could not flush
them because they were pinned. As a result, both the xfsaild and the
xfsbufd could not move the tail of the log forward without the CIL
first committing.

The cause of the problem was that the background CIL push, which
should happen when 8MB of aggregated changes have been committed, is
being held off by the concurrent transaction commit load. The
background push does a down_write_trylock() which will fail if there
is a concurrent transaction commit holding the push lock in read
mode. With 8 CPUs all doing transactions as fast as they can, there
was enough concurrent transaction commits to hold off the background
push until tail-pushing could no longer free log space, and the halt
would occur.

It should be noted that there is no reason why it would halt at 25%
of log space used by a single CIL checkpoint. This bug could
definitely violate the "no transaction should be larger than half
the log" requirement and hence result in corruption if the system
crashed under heavy load. This sort of bug is exactly the reason why
delayed logging was tagged as experimental....

The fix is to start blocking background pushes once the threshold
has been exceeded. Rework the threshold calculations to keep the
amount of log space a CIL checkpoint can use to below that of the
AIL push threshold to avoid the problem completely.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Alex Elder <aelder@sgi.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/xfs_log_cil.c  | 12 +++++++++---
 fs/xfs/xfs_log_priv.h | 37 +++++++++++++++++++++----------------
 2 files changed, 30 insertions(+), 19 deletions(-)

diff --git a/fs/xfs/xfs_log_cil.c b/fs/xfs/xfs_log_cil.c
index ed575fb4b495..7e206fc1fa36 100644
--- a/fs/xfs/xfs_log_cil.c
+++ b/fs/xfs/xfs_log_cil.c
@@ -405,9 +405,15 @@ xlog_cil_push(
 	new_ctx = kmem_zalloc(sizeof(*new_ctx), KM_SLEEP|KM_NOFS);
 	new_ctx->ticket = xlog_cil_ticket_alloc(log);
 
-	/* lock out transaction commit, but don't block on background push */
+	/*
+	 * Lock out transaction commit, but don't block for background pushes
+	 * unless we are well over the CIL space limit. See the definition of
+	 * XLOG_CIL_HARD_SPACE_LIMIT() for the full explanation of the logic
+	 * used here.
+	 */
 	if (!down_write_trylock(&cil->xc_ctx_lock)) {
-		if (!push_seq)
+		if (!push_seq &&
+		    cil->xc_ctx->space_used < XLOG_CIL_HARD_SPACE_LIMIT(log))
 			goto out_free_ticket;
 		down_write(&cil->xc_ctx_lock);
 	}
@@ -422,7 +428,7 @@ xlog_cil_push(
 		goto out_skip;
 
 	/* check for a previously pushed seqeunce */
-	if (push_seq < cil->xc_ctx->sequence)
+	if (push_seq && push_seq < cil->xc_ctx->sequence)
 		goto out_skip;
 
 	/*
diff --git a/fs/xfs/xfs_log_priv.h b/fs/xfs/xfs_log_priv.h
index ced52b98b322..edcdfe01617f 100644
--- a/fs/xfs/xfs_log_priv.h
+++ b/fs/xfs/xfs_log_priv.h
@@ -426,13 +426,13 @@ struct xfs_cil {
 };
 
 /*
- * The amount of log space we should the CIL to aggregate is difficult to size.
- * Whatever we chose we have to make we can get a reservation for the log space
- * effectively, that it is large enough to capture sufficient relogging to
- * reduce log buffer IO significantly, but it is not too large for the log or
- * induces too much latency when writing out through the iclogs. We track both
- * space consumed and the number of vectors in the checkpoint context, so we
- * need to decide which to use for limiting.
+ * The amount of log space we allow the CIL to aggregate is difficult to size.
+ * Whatever we choose, we have to make sure we can get a reservation for the
+ * log space effectively, that it is large enough to capture sufficient
+ * relogging to reduce log buffer IO significantly, but it is not too large for
+ * the log or induces too much latency when writing out through the iclogs. We
+ * track both space consumed and the number of vectors in the checkpoint
+ * context, so we need to decide which to use for limiting.
  *
  * Every log buffer we write out during a push needs a header reserved, which
  * is at least one sector and more for v2 logs. Hence we need a reservation of
@@ -459,16 +459,21 @@ struct xfs_cil {
  * checkpoint transaction ticket is specific to the checkpoint context, rather
  * than the CIL itself.
  *
- * With dynamic reservations, we can basically make up arbitrary limits for the
- * checkpoint size so long as they don't violate any other size rules.  Hence
- * the initial maximum size for the checkpoint transaction will be set to a
- * quarter of the log or 8MB, which ever is smaller. 8MB is an arbitrary limit
- * right now based on the latency of writing out a large amount of data through
- * the circular iclog buffers.
+ * With dynamic reservations, we can effectively make up arbitrary limits for
+ * the checkpoint size so long as they don't violate any other size rules.
+ * Recovery imposes a rule that no transaction exceed half the log, so we are
+ * limited by that.  Furthermore, the log transaction reservation subsystem
+ * tries to keep 25% of the log free, so we need to keep below that limit or we
+ * risk running out of free log space to start any new transactions.
+ *
+ * In order to keep background CIL push efficient, we will set a lower
+ * threshold at which background pushing is attempted without blocking current
+ * transaction commits.  A separate, higher bound defines when CIL pushes are
+ * enforced to ensure we stay within our maximum checkpoint size bounds.
+ * threshold, yet give us plenty of space for aggregation on large logs.
  */
-
-#define XLOG_CIL_SPACE_LIMIT(log)	\
-	(min((log->l_logsize >> 2), (8 * 1024 * 1024)))
+#define XLOG_CIL_SPACE_LIMIT(log)	(log->l_logsize >> 3)
+#define XLOG_CIL_HARD_SPACE_LIMIT(log)	(3 * (log->l_logsize >> 4))
 
 /*
  * The reservation head lsn is not made up of a cycle number and block number.

From 3a78f965328482eee542217de79036c2a8791de8 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Wed, 29 Sep 2010 19:53:51 +0800
Subject: [PATCH 633/728] ACPI, APEI, Fix APEI related table size checking

On Huang Ying's machine:

erst_tab->header_length == sizeof(struct acpi_table_einj)

but Yinghai reported that on his machine,

erst_tab->header_length == sizeof(struct acpi_table_einj) -
sizeof(struct acpi_table_header)

To make erst table size checking code works on all systems, both
testing are treated as PASS.

Same situation applies to einj_tab->header_length, so corresponding
table size checking is changed in similar way too.

v2:

- Treat both table size as valid

Originally-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/apei/einj.c | 4 +++-
 drivers/acpi/apei/erst.c | 4 +++-
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c
index 465c885938ee..cf29df69380b 100644
--- a/drivers/acpi/apei/einj.c
+++ b/drivers/acpi/apei/einj.c
@@ -426,7 +426,9 @@ DEFINE_SIMPLE_ATTRIBUTE(error_inject_fops, NULL,
 
 static int einj_check_table(struct acpi_table_einj *einj_tab)
 {
-	if (einj_tab->header_length != sizeof(struct acpi_table_einj))
+	if ((einj_tab->header_length !=
+	     (sizeof(struct acpi_table_einj) - sizeof(einj_tab->header)))
+	    && (einj_tab->header_length != sizeof(struct acpi_table_einj)))
 		return -EINVAL;
 	if (einj_tab->header.length < sizeof(struct acpi_table_einj))
 		return -EINVAL;
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 18645f4e83cd..10cc1928ec23 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -750,7 +750,9 @@ __setup("erst_disable", setup_erst_disable);
 
 static int erst_check_table(struct acpi_table_erst *erst_tab)
 {
-	if (erst_tab->header_length != sizeof(struct acpi_table_erst))
+	if ((erst_tab->header_length !=
+	     (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header)))
+	    && (erst_tab->header_length != sizeof(struct acpi_table_einj)))
 		return -EINVAL;
 	if (erst_tab->header.length < sizeof(struct acpi_table_erst))
 		return -EINVAL;

From bad97c37db9c1ee36de8ac58f9f73931d15a2e94 Mon Sep 17 00:00:00 2001
From: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Date: Wed, 29 Sep 2010 19:53:52 +0800
Subject: [PATCH 634/728] ACPI, APEI, Fix acpi_pre_map() return value

After we ioremap() a new region, we call __acpi_try_ioremap() to
see whether another thread has already mapped the same region.
This check clobbers "vaddr",  so compute the return value of
acpi_pre_map() using the ioremap() result "map->vaddr" instead.

v2:
    Modified the unsuitable description of patch.

v3:
    Removed unlikely() check and made description simpler.

Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/atomicio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c
index 8f8bd736d4ff..542e53903891 100644
--- a/drivers/acpi/atomicio.c
+++ b/drivers/acpi/atomicio.c
@@ -142,7 +142,7 @@ static void __iomem *acpi_pre_map(phys_addr_t paddr,
 	list_add_tail_rcu(&map->list, &acpi_iomaps);
 	spin_unlock_irqrestore(&acpi_iomaps_lock, flags);
 
-	return vaddr + (paddr - pg_off);
+	return map->vaddr + (paddr - map->paddr);
 err_unmap:
 	iounmap(vaddr);
 	return NULL;

From 1dd6b20e368765223c31569d364219785b24700b Mon Sep 17 00:00:00 2001
From: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Date: Wed, 29 Sep 2010 19:53:53 +0800
Subject: [PATCH 635/728] ACPI, APEI, HEST Fix the unsuitable usage of
 platform_data

platform_data in hest_parse_ghes() is used for saving the address of entry
information of erst_tab. When the device is failed to be added, platform_data
will be freed by platform_device_put(). But the value saved in platform_data
should not be freed here. If it is done, it will make system panic.

So I think platform_data should save the address of allocated memory
which saves entry information of erst_tab.

This patch fixed it and I confirmed it on x86_64 next-tree.

v2:
    Transport the pointer of hest_hdr to platform_data using
    platform_device_add_data()

Signed-off-by: Jin Dongming <jin.dongming@np.css.fujitsu.com>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/apei/ghes.c |  2 +-
 drivers/acpi/apei/hest.c | 11 +++++++----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 385a6059714a..0d505e59214d 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -302,7 +302,7 @@ static int __devinit ghes_probe(struct platform_device *ghes_dev)
 	struct ghes *ghes = NULL;
 	int rc = -EINVAL;
 
-	generic = ghes_dev->dev.platform_data;
+	generic = *(struct acpi_hest_generic **)ghes_dev->dev.platform_data;
 	if (!generic->enabled)
 		return -ENODEV;
 
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 343168d18266..1a3508a7fe03 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -137,20 +137,23 @@ static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
 
 static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
 {
-	struct acpi_hest_generic *generic;
 	struct platform_device *ghes_dev;
 	struct ghes_arr *ghes_arr = data;
 	int rc;
 
 	if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR)
 		return 0;
-	generic = (struct acpi_hest_generic *)hest_hdr;
-	if (!generic->enabled)
+
+	if (!((struct acpi_hest_generic *)hest_hdr)->enabled)
 		return 0;
 	ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id);
 	if (!ghes_dev)
 		return -ENOMEM;
-	ghes_dev->dev.platform_data = generic;
+
+	rc = platform_device_add_data(ghes_dev, &hest_hdr, sizeof(void *));
+	if (rc)
+		goto err;
+
 	rc = platform_device_add(ghes_dev);
 	if (rc)
 		goto err;

From 23f124ca3dda98496b7ccf897cfd66264a212b6c Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Wed, 29 Sep 2010 19:53:54 +0800
Subject: [PATCH 636/728] ACPI, APEI, Fix error path for memory allocation

In ERST debug/test support patch, a dynamic allocated buffer is
used. The may-failed memory allocation should be tried firstly before
free the previous buffer.

APEI resource management memory allocation related error path is fixed
too.

v2:

- Fix error messages for APEI resources management

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/apei/apei-base.c | 21 ++++++++++++++++-----
 drivers/acpi/apei/erst-dbg.c  | 16 ++++++++++------
 2 files changed, 26 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 73fd0c7487c1..4a904a4bf05f 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -445,11 +445,15 @@ EXPORT_SYMBOL_GPL(apei_resources_sub);
 int apei_resources_request(struct apei_resources *resources,
 			   const char *desc)
 {
-	struct apei_res *res, *res_bak;
+	struct apei_res *res, *res_bak = NULL;
 	struct resource *r;
+	int rc;
 
-	apei_resources_sub(resources, &apei_resources_all);
+	rc = apei_resources_sub(resources, &apei_resources_all);
+	if (rc)
+		return rc;
 
+	rc = -EINVAL;
 	list_for_each_entry(res, &resources->iomem, list) {
 		r = request_mem_region(res->start, res->end - res->start,
 				       desc);
@@ -475,7 +479,11 @@ int apei_resources_request(struct apei_resources *resources,
 		}
 	}
 
-	apei_resources_merge(&apei_resources_all, resources);
+	rc = apei_resources_merge(&apei_resources_all, resources);
+	if (rc) {
+		pr_err(APEI_PFX "Fail to merge resources!\n");
+		goto err_unmap_ioport;
+	}
 
 	return 0;
 err_unmap_ioport:
@@ -491,12 +499,13 @@ err_unmap_iomem:
 			break;
 		release_mem_region(res->start, res->end - res->start);
 	}
-	return -EINVAL;
+	return rc;
 }
 EXPORT_SYMBOL_GPL(apei_resources_request);
 
 void apei_resources_release(struct apei_resources *resources)
 {
+	int rc;
 	struct apei_res *res;
 
 	list_for_each_entry(res, &resources->iomem, list)
@@ -504,7 +513,9 @@ void apei_resources_release(struct apei_resources *resources)
 	list_for_each_entry(res, &resources->ioport, list)
 		release_region(res->start, res->end - res->start);
 
-	apei_resources_sub(&apei_resources_all, resources);
+	rc = apei_resources_sub(&apei_resources_all, resources);
+	if (rc)
+		pr_err(APEI_PFX "Fail to sub resources!\n");
 }
 EXPORT_SYMBOL_GPL(apei_resources_release);
 
diff --git a/drivers/acpi/apei/erst-dbg.c b/drivers/acpi/apei/erst-dbg.c
index 5281ddda2777..8561cfefa3dc 100644
--- a/drivers/acpi/apei/erst-dbg.c
+++ b/drivers/acpi/apei/erst-dbg.c
@@ -111,11 +111,13 @@ retry:
 		goto out;
 	}
 	if (len > erst_dbg_buf_len) {
-		kfree(erst_dbg_buf);
+		void *p;
 		rc = -ENOMEM;
-		erst_dbg_buf = kmalloc(len, GFP_KERNEL);
-		if (!erst_dbg_buf)
+		p = kmalloc(len, GFP_KERNEL);
+		if (!p)
 			goto out;
+		kfree(erst_dbg_buf);
+		erst_dbg_buf = p;
 		erst_dbg_buf_len = len;
 		goto retry;
 	}
@@ -150,11 +152,13 @@ static ssize_t erst_dbg_write(struct file *filp, const char __user *ubuf,
 	if (mutex_lock_interruptible(&erst_dbg_mutex))
 		return -EINTR;
 	if (usize > erst_dbg_buf_len) {
-		kfree(erst_dbg_buf);
+		void *p;
 		rc = -ENOMEM;
-		erst_dbg_buf = kmalloc(usize, GFP_KERNEL);
-		if (!erst_dbg_buf)
+		p = kmalloc(usize, GFP_KERNEL);
+		if (!p)
 			goto out;
+		kfree(erst_dbg_buf);
+		erst_dbg_buf = p;
 		erst_dbg_buf_len = usize;
 	}
 	rc = copy_from_user(erst_dbg_buf, ubuf, usize);

From c9ad8e062e4c733b36fc10ebc201bedde1a4da80 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Sep 2010 16:50:50 -0400
Subject: [PATCH 637/728] ACPI: acpi_pad: simplify code to avoid false gcc
 build warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

acpi_pad.c:432: warning: ‘num_cpus’ may be used uninitialized in this function

gcc 4.4.4 was unable to notice that num_cpus is always set.
Re-arrange the code to un-confuse gcc, and also make
it easier for humans to read....

Signed-off-by: Len Brown <len.browns@intel.com>
---
 drivers/acpi/acpi_pad.c | 34 ++++++++++++++++++----------------
 1 file changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index b76848c80be3..6b115f6c4313 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -382,31 +382,32 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device)
 	device_remove_file(&device->dev, &dev_attr_rrtime);
 }
 
-/* Query firmware how many CPUs should be idle */
-static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
+/*
+ * Query firmware how many CPUs should be idle
+ * return -1 on failure
+ */
+static int acpi_pad_pur(acpi_handle handle)
 {
 	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
 	union acpi_object *package;
-	int rev, num, ret = -EINVAL;
+	int num = -1;
 
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer)))
-		return -EINVAL;
+		return num;
 
 	if (!buffer.length || !buffer.pointer)
-		return -EINVAL;
+		return num;
 
 	package = buffer.pointer;
-	if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
-		goto out;
-	rev = package->package.elements[0].integer.value;
-	num = package->package.elements[1].integer.value;
-	if (rev != 1 || num < 0)
-		goto out;
-	*num_cpus = num;
-	ret = 0;
-out:
+
+	if (package->type == ACPI_TYPE_PACKAGE &&
+		package->package.count == 2 &&
+		package->package.elements[0].integer.value == 1) /* rev 1 */
+
+		num = package->package.elements[1].integer.value;
+
 	kfree(buffer.pointer);
-	return ret;
+	return num;
 }
 
 /* Notify firmware how many CPUs are idle */
@@ -433,7 +434,8 @@ static void acpi_pad_handle_notify(acpi_handle handle)
 	uint32_t idle_cpus;
 
 	mutex_lock(&isolated_cpus_lock);
-	if (acpi_pad_pur(handle, &num_cpus)) {
+	num_cpus = acpi_pad_pur(handle);
+	if (num_cpus < 0) {
 		mutex_unlock(&isolated_cpus_lock);
 		return;
 	}

From 0c827eebfcd5caad24a50bc514ef15476b086e47 Mon Sep 17 00:00:00 2001
From: Luis Henriques <luis.henrix@gmail.com>
Date: Wed, 7 Jul 2010 19:30:15 +0100
Subject: [PATCH 638/728] ACPI: fan: Fix more unbalanced code block

commit 934231de706d2579fae14f5857fcd8de991009ff fixes an unbalanced
CONFIG_ACPI_PROCFS code block during module initialisation.  This
patch fixes similar issue but for the module exit.

Signed-off-by: Luis Henriques <luis.henrix@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/fan.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index 8a3b840c0bb2..d94d2953c974 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -369,7 +369,9 @@ static void __exit acpi_fan_exit(void)
 
 	acpi_bus_unregister_driver(&acpi_fan_driver);
 
+#ifdef CONFIG_ACPI_PROCFS
 	remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir);
+#endif
 
 	return;
 }

From 0bbba38a61283a55f2061ab3e0910c572d19f462 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Wed, 29 Sep 2010 19:53:55 +0800
Subject: [PATCH 639/728] ACPI, APEI, Fix ERST MOVE_DATA instruction
 implementation

The src_base and dst_base fields in apei_exec_context are physical
address, so they should be ioremaped before being used in ERST
MOVE_DATA instruction.

Reported-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/apei/erst.c | 23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index a4904f1680cf..35bb2a0a8de6 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -266,13 +266,30 @@ static int erst_exec_move_data(struct apei_exec_context *ctx,
 {
 	int rc;
 	u64 offset;
+	void *src, *dst;
+
+	/* ioremap does not work in interrupt context */
+	if (in_interrupt()) {
+		pr_warning(ERST_PFX
+			   "MOVE_DATA can not be used in interrupt context");
+		return -EBUSY;
+	}
 
 	rc = __apei_exec_read_register(entry, &offset);
 	if (rc)
 		return rc;
-	memmove((void *)ctx->dst_base + offset,
-		(void *)ctx->src_base + offset,
-		ctx->var2);
+
+	src = ioremap(ctx->src_base + offset, ctx->var2);
+	if (!src)
+		return -ENOMEM;
+	dst = ioremap(ctx->dst_base + offset, ctx->var2);
+	if (!dst)
+		return -ENOMEM;
+
+	memmove(dst, src, ctx->var2);
+
+	iounmap(src);
+	iounmap(dst);
 
 	return 0;
 }

From 100cf87788c0e9104f6fb1b0ff5f72f73fbbbea3 Mon Sep 17 00:00:00 2001
From: Len Brown <len.brown@intel.com>
Date: Tue, 28 Sep 2010 22:57:02 -0400
Subject: [PATCH 640/728] ACPI: invoke DSDT corruption workaround on all
 Toshiba Satellite

Our list of Toshiba Satellite models that require this workaround
is growing -- so invoke the workaround for the entire product line.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/bus.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 5c221ab535d5..a70ca8ea9225 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -80,23 +80,15 @@ static int set_copy_dsdt(const struct dmi_system_id *id)
 
 static struct dmi_system_id dsdt_dmi_table[] __initdata = {
 	/*
-	 * Insyde BIOS on some TOSHIBA machines corrupt the DSDT.
+	 * Invoke DSDT corruption work-around on all Toshiba Satellite.
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=14679
 	 */
 	{
 	 .callback = set_copy_dsdt,
-	 .ident = "TOSHIBA Satellite A505",
+	 .ident = "TOSHIBA Satellite",
 	 .matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A505"),
-		},
-	},
-	{
-	 .callback = set_copy_dsdt,
-	 .ident = "TOSHIBA Satellite L505D",
-	 .matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L505D"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"),
 		},
 	},
 	{}

From 522440ed55d2cc8855ea5f82bc067e0483b2e1be Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 29 Sep 2010 09:49:54 -0400
Subject: [PATCH 641/728] cifs: set backing_dev_info on new S_ISREG inodes

Testing on very recent kernel (2.6.36-rc6) made this warning pop:

    WARNING: at fs/fs-writeback.c:87 inode_to_bdi+0x65/0x70()
    Hardware name:
    Dirtiable inode bdi default != sb bdi cifs

...the following patch fixes it and seems to be the obviously correct
thing to do for cifs.

Cc: stable@kernel.org
Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 93f77d438d3c..53cce8cc2224 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -801,6 +801,8 @@ retry_iget5_locked:
 			inode->i_flags |= S_NOATIME | S_NOCMTIME;
 		if (inode->i_state & I_NEW) {
 			inode->i_ino = hash;
+			if (S_ISREG(inode->i_mode))
+				inode->i_data.backing_dev_info = sb->s_bdi;
 #ifdef CONFIG_CIFS_FSCACHE
 			/* initialize per-inode cache cookie pointer */
 			CIFS_I(inode)->fscache = NULL;

From f12f662f29d5801e598c6bb4a71e54b2de218f72 Mon Sep 17 00:00:00 2001
From: Daniel J Blueman <daniel.blueman@gmail.com>
Date: Wed, 29 Sep 2010 21:01:55 +0100
Subject: [PATCH 642/728] fix OMAP2 MTD build failure

Fix build failure from recent interface change and merge.

Tested on OMAP3430.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mtd/nand/omap2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index 133d51528f8d..513e0a76a4a7 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -413,7 +413,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 		prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
 	} while (prefetch_status);
 	/* disable and stop the PFPW engine */
-	gpmc_prefetch_reset();
+	gpmc_prefetch_reset(info->gpmc_cs);
 
 	dma_unmap_single(&info->pdev->dev, dma_addr, len, dir);
 	return 0;

From 1fc8a117865b54590acd773a55fbac9221b018f0 Mon Sep 17 00:00:00 2001
From: Joel Becker <joel.becker@oracle.com>
Date: Wed, 29 Sep 2010 17:33:05 -0700
Subject: [PATCH 643/728] ocfs2: Don't walk off the end of fast symlinks.

ocfs2 fast symlinks are NUL terminated strings stored inline in the
inode data area.  However, disk corruption or a local attacker could, in
theory, remove that NUL.  Because we're using strlen() (my fault,
introduced in a731d1 when removing vfs_follow_link()), we could walk off
the end of that string.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: stable@kernel.org
---
 fs/ocfs2/symlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index 32499d213fc4..9975457c981f 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -128,7 +128,7 @@ static void *ocfs2_fast_follow_link(struct dentry *dentry,
 	}
 
 	/* Fast symlinks can't be large */
-	len = strlen(target);
+	len = strnlen(target, ocfs2_fast_symlink_chars(inode->i_sb));
 	link = kzalloc(len + 1, GFP_NOFS);
 	if (!link) {
 		status = -ENOMEM;

From 130b9851933e6da636502cd85e1ba8f45f862e8c Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Wed, 29 Sep 2010 17:47:58 +0200
Subject: [PATCH 644/728] drm: i810/i830: fix locked ioctl variant

The i810 and i830 device drivers may replace their file operations
on an open file descriptor. My previous patch to move the BKL
out of the common DRM code into these drivers only caught the
default file operations, not the ones that actually end up being
used.

Found while trying to come up with a way to kill the BKL for
good in these drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/i810/i810_dma.c | 2 +-
 drivers/gpu/drm/i830/i830_dma.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c
index 61b4caf220fa..fb07e73581e8 100644
--- a/drivers/gpu/drm/i810/i810_dma.c
+++ b/drivers/gpu/drm/i810/i810_dma.c
@@ -116,7 +116,7 @@ static int i810_mmap_buffers(struct file *filp, struct vm_area_struct *vma)
 static const struct file_operations i810_buffer_fops = {
 	.open = drm_open,
 	.release = drm_release,
-	.unlocked_ioctl = drm_ioctl,
+	.unlocked_ioctl = i810_ioctl,
 	.mmap = i810_mmap_buffers,
 	.fasync = drm_fasync,
 };
diff --git a/drivers/gpu/drm/i830/i830_dma.c b/drivers/gpu/drm/i830/i830_dma.c
index 671aa18415ac..cc92c7e6236f 100644
--- a/drivers/gpu/drm/i830/i830_dma.c
+++ b/drivers/gpu/drm/i830/i830_dma.c
@@ -118,7 +118,7 @@ static int i830_mmap_buffers(struct file *filp, struct vm_area_struct *vma)
 static const struct file_operations i830_buffer_fops = {
 	.open = drm_open,
 	.release = drm_release,
-	.unlocked_ioctl = drm_ioctl,
+	.unlocked_ioctl = i830_ioctl,
 	.mmap = i830_mmap_buffers,
 	.fasync = drm_fasync,
 };

From 98d943b02f6f1b57787ff1aa6f34d019a407e3ee Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 29 Sep 2010 16:52:25 +0200
Subject: [PATCH 645/728] oprofile, ARM: Release resources on failure

This patch fixes a resource leak on failure, where the
oprofilefs and some counters may not released properly.

Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@kernel.org> # .35.x
LKML-Reference: <20100929145225.GJ13563@erda.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/arm/oprofile/common.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 0691176899ff..72e09eb642dd 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -102,6 +102,7 @@ static int op_create_counter(int cpu, int event)
 	if (IS_ERR(pevent)) {
 		ret = PTR_ERR(pevent);
 	} else if (pevent->state != PERF_EVENT_STATE_ACTIVE) {
+		perf_event_release_kernel(pevent);
 		pr_warning("oprofile: failed to enable event %d "
 				"on CPU %d\n", event, cpu);
 		ret = -EBUSY;
@@ -365,6 +366,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	ret = init_driverfs();
 	if (ret) {
 		kfree(counter_config);
+		counter_config = NULL;
 		return ret;
 	}
 
@@ -402,7 +404,6 @@ void oprofile_arch_exit(void)
 	struct perf_event *event;
 
 	if (*perf_events) {
-		exit_driverfs();
 		for_each_possible_cpu(cpu) {
 			for (id = 0; id < perf_num_counters; ++id) {
 				event = perf_events[cpu][id];
@@ -413,8 +414,10 @@ void oprofile_arch_exit(void)
 		}
 	}
 
-	if (counter_config)
+	if (counter_config) {
 		kfree(counter_config);
+		exit_driverfs();
+	}
 }
 #else
 int __init oprofile_arch_init(struct oprofile_operations *ops)

From 03e22198d2379ffa746c9ea332fbb1f094f9423b Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 29 Sep 2010 23:01:38 -0400
Subject: [PATCH 646/728] perf, x86: Handle in flight NMIs on P4 platform

Stephane reported we've forgot to guard the P4 platform
against spurious in-flight performance IRQs. Fix it.

This fixes potential spurious 'dazed and confused' NMI
messages.

Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Robert Richter <robert.richter@amd.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <1285815698-4298-1-git-send-email-dzickus@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_event_p4.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c
index b560db3305be..249015173992 100644
--- a/arch/x86/kernel/cpu/perf_event_p4.c
+++ b/arch/x86/kernel/cpu/perf_event_p4.c
@@ -660,8 +660,12 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		int overflow;
 
-		if (!test_bit(idx, cpuc->active_mask))
+		if (!test_bit(idx, cpuc->active_mask)) {
+			/* catch in-flight IRQs */
+			if (__test_and_clear_bit(idx, cpuc->running))
+				handled++;
 			continue;
+		}
 
 		event = cpuc->events[idx];
 		hwc = &event->hw;

From 87400e5406e215e9a1b43cf67794fbb34c15c342 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 30 Sep 2010 08:37:38 -0700
Subject: [PATCH 647/728] Fix up more fallout form alpha signal cleanups

Commit c52c2ddc1dfa ("alpha: switch osf_sigprocmask() to use of
sigprocmask()") had several problems.  The more obvious compile issues
got fixed in commit 0f44fbd297e1 ("alpha: fix compile problem in
arch/alpha/kernel/signal.c"), but it also caused a regression.

Since _BLOCKABLE is already the set of signals that can be blocked, the
code should do "newmask & _BLOCKABLE" rather than inverting _BLOCKABLE
before masking.

Reported-by: Michael Cree <mcree@orcon.net.nz>
Patch-by: Al Viro <viro@zeniv.linux.org.uk>
Patch-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/signal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index d290845aef59..6f7feb5db271 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -48,7 +48,7 @@ SYSCALL_DEFINE2(osf_sigprocmask, int, how, unsigned long, newmask)
 	sigset_t mask;
 	unsigned long res;
 
-	siginitset(&mask, newmask & ~_BLOCKABLE);
+	siginitset(&mask, newmask & _BLOCKABLE);
 	res = sigprocmask(how, &mask, &oldmask);
 	if (!res) {
 		force_successful_syscall_return();

From 86cf1474948a91c67b3dd58f8b360006c82e0068 Mon Sep 17 00:00:00 2001
From: Namhyung Kim <namhyung@gmail.com>
Date: Fri, 13 Aug 2010 23:00:11 +0900
Subject: [PATCH 648/728] [CPUFREQ] acpi-cpufreq: add missing __percpu markup

acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 246cd3afbb5f..cd8da247dda1 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -72,7 +72,7 @@ struct acpi_cpufreq_data {
 static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data);
 
 /* acpi_perf_data is a pointer to percpu data. */
-static struct acpi_processor_performance *acpi_perf_data;
+static struct acpi_processor_performance __percpu *acpi_perf_data;
 
 static struct cpufreq_driver acpi_cpufreq_driver;
 

From 3682930623f63c693845d9620c6bcdf5598c9bbb Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Thu, 30 Sep 2010 22:57:33 +0300
Subject: [PATCH 649/728] [CPUFREQ] Fix memory leaks in pcc_cpufreq_do_osc

If acpi_evaluate_object() function call doesn't fail, we must kfree()
output.buffer before returning from pcc_cpufreq_do_osc().

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Dave Jones <davej@redhat.com>
---
 arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
index 994230d4dc4e..4f6f679f2799 100644
--- a/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/pcc-cpufreq.c
@@ -368,16 +368,22 @@ static int __init pcc_cpufreq_do_osc(acpi_handle *handle)
 		return -ENODEV;
 
 	out_obj = output.pointer;
-	if (out_obj->type != ACPI_TYPE_BUFFER)
-		return -ENODEV;
+	if (out_obj->type != ACPI_TYPE_BUFFER) {
+		ret = -ENODEV;
+		goto out_free;
+	}
 
 	errors = *((u32 *)out_obj->buffer.pointer) & ~(1 << 0);
-	if (errors)
-		return -ENODEV;
+	if (errors) {
+		ret = -ENODEV;
+		goto out_free;
+	}
 
 	supported = *((u32 *)(out_obj->buffer.pointer + 4));
-	if (!(supported & 0x1))
-		return -ENODEV;
+	if (!(supported & 0x1)) {
+		ret = -ENODEV;
+		goto out_free;
+	}
 
 out_free:
 	kfree(output.pointer);

From e913b146493993c8ac33561655c590e58b500c6f Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 30 Sep 2010 22:59:12 +0200
Subject: [PATCH 650/728] ALSA: i2c/other/ak4xx-adda: Fix a compile warning
 with CONFIG_PROCFS=n

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/i2c/other/ak4xxx-adda.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/i2c/other/ak4xxx-adda.c b/sound/i2c/other/ak4xxx-adda.c
index 1adb8a3c2b62..42d7844ecd0b 100644
--- a/sound/i2c/other/ak4xxx-adda.c
+++ b/sound/i2c/other/ak4xxx-adda.c
@@ -900,7 +900,7 @@ static int proc_init(struct snd_akm4xxx *ak)
 	return 0;
 }
 #else /* !CONFIG_PROC_FS */
-static int proc_init(struct snd_akm4xxx *ak) {}
+static int proc_init(struct snd_akm4xxx *ak) { return 0; }
 #endif
 
 int snd_akm4xxx_build_controls(struct snd_akm4xxx *ak)

From 1cf180c94e9166cda083ff65333883ab3648e852 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 28 Sep 2010 20:57:19 +0200
Subject: [PATCH 651/728] x86, irq: Plug memory leak in sparse irq

free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this
triggers a use after free caused by the fact that copying struct
irq_cfg is done with memcpy, which copies the pointer not the cpumask.

Fix both places.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/apic/io_apic.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f1efebaf5510..5c5b8f3dddb5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -306,14 +306,19 @@ void arch_init_copy_chip_data(struct irq_desc *old_desc,
 
 	old_cfg = old_desc->chip_data;
 
-	memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
+	cfg->vector = old_cfg->vector;
+	cfg->move_in_progress = old_cfg->move_in_progress;
+	cpumask_copy(cfg->domain, old_cfg->domain);
+	cpumask_copy(cfg->old_domain, old_cfg->old_domain);
 
 	init_copy_irq_2_pin(old_cfg, cfg, node);
 }
 
-static void free_irq_cfg(struct irq_cfg *old_cfg)
+static void free_irq_cfg(struct irq_cfg *cfg)
 {
-	kfree(old_cfg);
+	free_cpumask_var(cfg->domain);
+	free_cpumask_var(cfg->old_domain);
+	kfree(cfg);
 }
 
 void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc)

From 021989622810b02aab4b24f91e1f5ada2b654579 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Tue, 28 Sep 2010 23:20:23 +0200
Subject: [PATCH 652/728] x86, hpet: Fix bogus error check in hpet_assign_irq()

create_irq() returns -1 if the interrupt allocation failed, but the
code checks for irq == 0.

Use create_irq_nr() instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/hpet.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 410fdb3f1939..7494999141b3 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -506,7 +506,7 @@ static int hpet_assign_irq(struct hpet_dev *dev)
 {
 	unsigned int irq;
 
-	irq = create_irq();
+	irq = create_irq_nr(0, -1);
 	if (!irq)
 		return -EINVAL;
 

From 7031307aefb6048377385dbb0af2dd43bb0190bb Mon Sep 17 00:00:00 2001
From: MyungJoo Ham <myungjoo.ham@samsung.com>
Date: Thu, 30 Sep 2010 15:54:46 +0200
Subject: [PATCH 653/728] i2c-s3c2410: fix calculation of SDA line delay

S3C2440 style I2C controller uses PCLK to calculate the SDA line delay.
The driver wrongly assumed that this delay is calculated from the
frequency that the controller is operating on. This patch fixes this
issue.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 drivers/i2c/busses/i2c-s3c2410.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 72902e0bbfa7..bf831bf81587 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -662,8 +662,8 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 		unsigned long sda_delay;
 
 		if (pdata->sda_delay) {
-			sda_delay = (freq / 1000) * pdata->sda_delay;
-			sda_delay /= 1000000;
+			sda_delay = clkin * pdata->sda_delay;
+			sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
 			sda_delay = DIV_ROUND_UP(sda_delay, 5);
 			if (sda_delay > 3)
 				sda_delay = 3;

From 29d08b3efddca628b0360411ab2b85f7b1723f48 Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Mon, 27 Sep 2010 16:17:17 +1000
Subject: [PATCH 654/728] drm/gem: handlecount isn't really a kref so don't
 make it one.

There were lots of places being inconsistent since handle count
looked like a kref but it really wasn't.

Fix this my just making handle count an atomic on the object,
and have it increase the normal object kref.

Now i915/radeon/nouveau drivers can drop the normal reference on
userspace object creation, and have the handle hold it.

This patch fixes a memory leak or corruption on unload, because
the driver had no way of knowing if a handle had been actually
added for this object, and the fbcon object needed to know this
to clean itself up properly.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_gem.c                  |  8 ++------
 drivers/gpu/drm/drm_info.c                 |  2 +-
 drivers/gpu/drm/i915/i915_gem.c            |  6 ++----
 drivers/gpu/drm/i915/intel_fb.c            |  4 +++-
 drivers/gpu/drm/nouveau/nouveau_fbcon.c    |  1 +
 drivers/gpu/drm/nouveau/nouveau_gem.c      |  6 ++----
 drivers/gpu/drm/nouveau/nouveau_notifier.c |  1 +
 drivers/gpu/drm/radeon/radeon_display.c    |  3 ++-
 drivers/gpu/drm/radeon/radeon_fb.c         | 14 ++++----------
 drivers/gpu/drm/radeon/radeon_gem.c        |  4 ++--
 include/drm/drmP.h                         | 18 +++++++++++++-----
 11 files changed, 33 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index 6fe2cd298c12..f7e61be8430a 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -148,7 +148,7 @@ int drm_gem_object_init(struct drm_device *dev,
 		return -ENOMEM;
 
 	kref_init(&obj->refcount);
-	kref_init(&obj->handlecount);
+	atomic_set(&obj->handle_count, 0);
 	obj->size = size;
 
 	atomic_inc(&dev->object_count);
@@ -496,12 +496,8 @@ static void drm_gem_object_ref_bug(struct kref *list_kref)
  * called before drm_gem_object_free or we'll be touching
  * freed memory
  */
-void
-drm_gem_object_handle_free(struct kref *kref)
+void drm_gem_object_handle_free(struct drm_gem_object *obj)
 {
-	struct drm_gem_object *obj = container_of(kref,
-						  struct drm_gem_object,
-						  handlecount);
 	struct drm_device *dev = obj->dev;
 
 	/* Remove any name for this object */
diff --git a/drivers/gpu/drm/drm_info.c b/drivers/gpu/drm/drm_info.c
index 2ef2c7827243..974e970ce3f8 100644
--- a/drivers/gpu/drm/drm_info.c
+++ b/drivers/gpu/drm/drm_info.c
@@ -255,7 +255,7 @@ int drm_gem_one_name_info(int id, void *ptr, void *data)
 
 	seq_printf(m, "%6d %8zd %7d %8d\n",
 		   obj->name, obj->size,
-		   atomic_read(&obj->handlecount.refcount),
+		   atomic_read(&obj->handle_count),
 		   atomic_read(&obj->refcount.refcount));
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index cf4ffbee1c00..4cdf74264ee8 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -136,14 +136,12 @@ i915_gem_create_ioctl(struct drm_device *dev, void *data,
 		return -ENOMEM;
 
 	ret = drm_gem_handle_create(file_priv, obj, &handle);
+	/* drop reference from allocate - handle holds it now */
+	drm_gem_object_unreference_unlocked(obj);
 	if (ret) {
-		drm_gem_object_unreference_unlocked(obj);
 		return ret;
 	}
 
-	/* Sink the floating reference from kref_init(handlecount) */
-	drm_gem_object_handle_unreference_unlocked(obj);
-
 	args->handle = handle;
 	return 0;
 }
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 7bdc96256bf5..56ad9df2ccb5 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -237,8 +237,10 @@ int intel_fbdev_destroy(struct drm_device *dev,
 	drm_fb_helper_fini(&ifbdev->helper);
 
 	drm_framebuffer_cleanup(&ifb->base);
-	if (ifb->obj)
+	if (ifb->obj) {
+		drm_gem_object_handle_unreference(ifb->obj);
 		drm_gem_object_unreference(ifb->obj);
+	}
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
index dbd30b2e43fd..d2047713dc59 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c
@@ -352,6 +352,7 @@ nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *nfbdev)
 
 	if (nouveau_fb->nvbo) {
 		nouveau_bo_unmap(nouveau_fb->nvbo);
+		drm_gem_object_handle_unreference_unlocked(nouveau_fb->nvbo->gem);
 		drm_gem_object_unreference_unlocked(nouveau_fb->nvbo->gem);
 		nouveau_fb->nvbo = NULL;
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index ead7b8fc53fc..19620a6709f5 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -167,11 +167,9 @@ nouveau_gem_ioctl_new(struct drm_device *dev, void *data,
 		goto out;
 
 	ret = drm_gem_handle_create(file_priv, nvbo->gem, &req->info.handle);
+	/* drop reference from allocate - handle holds it now */
+	drm_gem_object_unreference_unlocked(nvbo->gem);
 out:
-	drm_gem_object_handle_unreference_unlocked(nvbo->gem);
-
-	if (ret)
-		drm_gem_object_unreference_unlocked(nvbo->gem);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c
index 3ec181ff50ce..3c9964a8fbad 100644
--- a/drivers/gpu/drm/nouveau/nouveau_notifier.c
+++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c
@@ -79,6 +79,7 @@ nouveau_notifier_takedown_channel(struct nouveau_channel *chan)
 	mutex_lock(&dev->struct_mutex);
 	nouveau_bo_unpin(chan->notifier_bo);
 	mutex_unlock(&dev->struct_mutex);
+	drm_gem_object_handle_unreference_unlocked(chan->notifier_bo->gem);
 	drm_gem_object_unreference_unlocked(chan->notifier_bo->gem);
 	drm_mm_takedown(&chan->notifier_heap);
 }
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 7422f274615a..b92d2f2fcbed 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -843,8 +843,9 @@ static void radeon_user_framebuffer_destroy(struct drm_framebuffer *fb)
 {
 	struct radeon_framebuffer *radeon_fb = to_radeon_framebuffer(fb);
 
-	if (radeon_fb->obj)
+	if (radeon_fb->obj) {
 		drm_gem_object_unreference_unlocked(radeon_fb->obj);
+	}
 	drm_framebuffer_cleanup(fb);
 	kfree(radeon_fb);
 }
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index c74a8b20d941..9cdf6a35bc2c 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -94,8 +94,10 @@ static void radeonfb_destroy_pinned_object(struct drm_gem_object *gobj)
 	ret = radeon_bo_reserve(rbo, false);
 	if (likely(ret == 0)) {
 		radeon_bo_kunmap(rbo);
+		radeon_bo_unpin(rbo);
 		radeon_bo_unreserve(rbo);
 	}
+	drm_gem_object_handle_unreference(gobj);
 	drm_gem_object_unreference_unlocked(gobj);
 }
 
@@ -325,8 +327,6 @@ static int radeon_fbdev_destroy(struct drm_device *dev, struct radeon_fbdev *rfb
 {
 	struct fb_info *info;
 	struct radeon_framebuffer *rfb = &rfbdev->rfb;
-	struct radeon_bo *rbo;
-	int r;
 
 	if (rfbdev->helper.fbdev) {
 		info = rfbdev->helper.fbdev;
@@ -338,14 +338,8 @@ static int radeon_fbdev_destroy(struct drm_device *dev, struct radeon_fbdev *rfb
 	}
 
 	if (rfb->obj) {
-		rbo = rfb->obj->driver_private;
-		r = radeon_bo_reserve(rbo, false);
-		if (likely(r == 0)) {
-			radeon_bo_kunmap(rbo);
-			radeon_bo_unpin(rbo);
-			radeon_bo_unreserve(rbo);
-		}
-		drm_gem_object_unreference_unlocked(rfb->obj);
+		radeonfb_destroy_pinned_object(rfb->obj);
+		rfb->obj = NULL;
 	}
 	drm_fb_helper_fini(&rfbdev->helper);
 	drm_framebuffer_cleanup(&rfb->base);
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index c578f265b24c..d1e595d91723 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -201,11 +201,11 @@ int radeon_gem_create_ioctl(struct drm_device *dev, void *data,
 		return r;
 	}
 	r = drm_gem_handle_create(filp, gobj, &handle);
+	/* drop reference from allocate - handle holds it now */
+	drm_gem_object_unreference_unlocked(gobj);
 	if (r) {
-		drm_gem_object_unreference_unlocked(gobj);
 		return r;
 	}
-	drm_gem_object_handle_unreference_unlocked(gobj);
 	args->handle = handle;
 	return 0;
 }
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 774e1d49509b..07e4726a4ee0 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -612,7 +612,7 @@ struct drm_gem_object {
 	struct kref refcount;
 
 	/** Handle count of this object. Each handle also holds a reference */
-	struct kref handlecount;
+	atomic_t handle_count; /* number of handles on this object */
 
 	/** Related drm device */
 	struct drm_device *dev;
@@ -1461,7 +1461,7 @@ struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
 					    size_t size);
 int drm_gem_object_init(struct drm_device *dev,
 			struct drm_gem_object *obj, size_t size);
-void drm_gem_object_handle_free(struct kref *kref);
+void drm_gem_object_handle_free(struct drm_gem_object *obj);
 void drm_gem_vm_open(struct vm_area_struct *vma);
 void drm_gem_vm_close(struct vm_area_struct *vma);
 int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma);
@@ -1496,7 +1496,7 @@ static inline void
 drm_gem_object_handle_reference(struct drm_gem_object *obj)
 {
 	drm_gem_object_reference(obj);
-	kref_get(&obj->handlecount);
+	atomic_inc(&obj->handle_count);
 }
 
 static inline void
@@ -1505,12 +1505,15 @@ drm_gem_object_handle_unreference(struct drm_gem_object *obj)
 	if (obj == NULL)
 		return;
 
+	if (atomic_read(&obj->handle_count) == 0)
+		return;
 	/*
 	 * Must bump handle count first as this may be the last
 	 * ref, in which case the object would disappear before we
 	 * checked for a name
 	 */
-	kref_put(&obj->handlecount, drm_gem_object_handle_free);
+	if (atomic_dec_and_test(&obj->handle_count))
+		drm_gem_object_handle_free(obj);
 	drm_gem_object_unreference(obj);
 }
 
@@ -1520,12 +1523,17 @@ drm_gem_object_handle_unreference_unlocked(struct drm_gem_object *obj)
 	if (obj == NULL)
 		return;
 
+	if (atomic_read(&obj->handle_count) == 0)
+		return;
+
 	/*
 	* Must bump handle count first as this may be the last
 	* ref, in which case the object would disappear before we
 	* checked for a name
 	*/
-	kref_put(&obj->handlecount, drm_gem_object_handle_free);
+
+	if (atomic_dec_and_test(&obj->handle_count))
+		drm_gem_object_handle_free(obj);
 	drm_gem_object_unreference_unlocked(obj);
 }
 

From 6110a1f43c27b516e16d5ce8860fca50748c2a87 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Thu, 30 Sep 2010 21:19:07 -0400
Subject: [PATCH 655/728] intel_idle: Voluntary leave_mm before entering deeper

Avoid TLB flush IPIs for the cores in deeper c-states by voluntary leave_mm()
before entering into that state. CPUs tend to flush TLB in those c-states
anyways.

acpi_idle does this with C3-type states, but it was not caried over
when intel_idle was introduced.  intel_idle can apply it
to C-states in addition to those that ACPI might export as C3...

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/idle/intel_idle.c | 18 ++++++++++++++----
 include/linux/cpuidle.h   |  1 +
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 96bf38097996..0906fc5b69b9 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -108,7 +108,7 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "NHM-C3",
 		.desc = "MWAIT 0x10",
 		.driver_data = (void *) 0x10,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 20,
 		.power_usage = 500,
 		.target_residency = 80,
@@ -117,7 +117,7 @@ static struct cpuidle_state nehalem_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "NHM-C6",
 		.desc = "MWAIT 0x20",
 		.driver_data = (void *) 0x20,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 200,
 		.power_usage = 350,
 		.target_residency = 800,
@@ -149,7 +149,7 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "ATM-C4",
 		.desc = "MWAIT 0x30",
 		.driver_data = (void *) 0x30,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 100,
 		.power_usage = 250,
 		.target_residency = 400,
@@ -159,7 +159,7 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = {
 		.name = "ATM-C6",
 		.desc = "MWAIT 0x40",
 		.driver_data = (void *) 0x40,
-		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED,
 		.exit_latency = 200,
 		.power_usage = 150,
 		.target_residency = 800,
@@ -185,6 +185,16 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
 
 	local_irq_disable();
 
+	/*
+	 * If the state flag indicates that the TLB will be flushed or if this
+	 * is the deepest c-state supported, do a voluntary leave mm to avoid
+	 * costly and mostly unnecessary wakeups for flushing the user TLB's
+	 * associated with the active mm.
+	 */
+	if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED ||
+	    (&dev->states[dev->state_count - 1] == state))
+		leave_mm(cpu);
+
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
 
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 36ca9721a0c2..1be416bbbb82 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -53,6 +53,7 @@ struct cpuidle_state {
 #define CPUIDLE_FLAG_BALANCED	(0x40) /* medium latency, moderate savings */
 #define CPUIDLE_FLAG_DEEP	(0x80) /* high latency, large savings */
 #define CPUIDLE_FLAG_IGNORE	(0x100) /* ignore during this idle period */
+#define CPUIDLE_FLAG_TLB_FLUSHED (0x200) /* tlb will be flushed */
 
 #define CPUIDLE_DRIVER_FLAGS_MASK (0xFFFF0000)
 

From e39a01501b228e1be2037d5bddccae2a820af902 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed, 29 Sep 2010 22:23:05 +0100
Subject: [PATCH 656/728] drm/i915: Fix refleak during eviction.

Now that we hold onto a reference whilst evicting objects, we need to
be sure that we drop all the references taken -- even on the error
paths.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/i915_gem_evict.c | 49 ++++++++++++---------------
 1 file changed, 22 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index e85246ef691c..5c428fa3e0b3 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -93,7 +93,7 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct list_head eviction_list, unwind_list;
-	struct drm_i915_gem_object *obj_priv, *tmp_obj_priv;
+	struct drm_i915_gem_object *obj_priv;
 	struct list_head *render_iter, *bsd_iter;
 	int ret = 0;
 
@@ -175,39 +175,34 @@ i915_gem_evict_something(struct drm_device *dev, int min_size, unsigned alignmen
 	return -ENOSPC;
 
 found:
+	/* drm_mm doesn't allow any other other operations while
+	 * scanning, therefore store to be evicted objects on a
+	 * temporary list. */
 	INIT_LIST_HEAD(&eviction_list);
-	list_for_each_entry_safe(obj_priv, tmp_obj_priv,
-				 &unwind_list, evict_list) {
+	while (!list_empty(&unwind_list)) {
+		obj_priv = list_first_entry(&unwind_list,
+					    struct drm_i915_gem_object,
+					    evict_list);
 		if (drm_mm_scan_remove_block(obj_priv->gtt_space)) {
-			/* drm_mm doesn't allow any other other operations while
-			 * scanning, therefore store to be evicted objects on a
-			 * temporary list. */
 			list_move(&obj_priv->evict_list, &eviction_list);
-		} else
-			drm_gem_object_unreference(&obj_priv->base);
-	}
-
-	/* Unbinding will emit any required flushes */
-	list_for_each_entry_safe(obj_priv, tmp_obj_priv,
-				 &eviction_list, evict_list) {
-#if WATCH_LRU
-		DRM_INFO("%s: evicting %p\n", __func__, &obj_priv->base);
-#endif
-		ret = i915_gem_object_unbind(&obj_priv->base);
-		if (ret)
-			return ret;
-
+			continue;
+		}
+		list_del(&obj_priv->evict_list);
 		drm_gem_object_unreference(&obj_priv->base);
 	}
 
-	/* The just created free hole should be on the top of the free stack
-	 * maintained by drm_mm, so this BUG_ON actually executes in O(1).
-	 * Furthermore all accessed data has just recently been used, so it
-	 * should be really fast, too. */
-	BUG_ON(!drm_mm_search_free(&dev_priv->mm.gtt_space, min_size,
-				   alignment, 0));
+	/* Unbinding will emit any required flushes */
+	while (!list_empty(&eviction_list)) {
+		obj_priv = list_first_entry(&eviction_list,
+					    struct drm_i915_gem_object,
+					    evict_list);
+		if (ret == 0)
+			ret = i915_gem_object_unbind(&obj_priv->base);
+		list_del(&obj_priv->evict_list);
+		drm_gem_object_unreference(&obj_priv->base);
+	}
 
-	return 0;
+	return ret;
 }
 
 int

From 39b4d07aa3583ceefe73622841303a0a3e942ca1 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Thu, 30 Sep 2010 09:10:26 +0100
Subject: [PATCH 657/728] drm: Hold the mutex when dropping the last GEM
 reference (v2)

In order to be fully threadsafe we need to check that the drm_gem_object
refcount is still 0 after acquiring the mutex in order to call the free
function. Otherwise, we may encounter scenarios like:

Thread A:                                        Thread B:
drm_gem_close
unreference_unlocked
kref_put                                         mutex_lock
...                                              i915_gem_evict
...                                              kref_get -> BUG
...                                              i915_gem_unbind
...                                              kref_put
...                                              i915_gem_object_free
...                                              mutex_unlock
mutex_lock
i915_gem_object_free -> BUG
i915_gem_object_unbind
kfree
mutex_unlock

Note that no driver is currently using the free_unlocked vfunc and it is
scheduled for removal, hasten that process.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30454
Reported-and-Tested-by: Magnus Kessler <Magnus.Kessler@gmx.net>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_gem.c | 22 ----------------------
 include/drm/drmP.h        | 10 ++++++----
 2 files changed, 6 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c
index f7e61be8430a..5663d2719063 100644
--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -462,28 +462,6 @@ drm_gem_object_free(struct kref *kref)
 }
 EXPORT_SYMBOL(drm_gem_object_free);
 
-/**
- * Called after the last reference to the object has been lost.
- * Must be called without holding struct_mutex
- *
- * Frees the object
- */
-void
-drm_gem_object_free_unlocked(struct kref *kref)
-{
-	struct drm_gem_object *obj = (struct drm_gem_object *) kref;
-	struct drm_device *dev = obj->dev;
-
-	if (dev->driver->gem_free_object_unlocked != NULL)
-		dev->driver->gem_free_object_unlocked(obj);
-	else if (dev->driver->gem_free_object != NULL) {
-		mutex_lock(&dev->struct_mutex);
-		dev->driver->gem_free_object(obj);
-		mutex_unlock(&dev->struct_mutex);
-	}
-}
-EXPORT_SYMBOL(drm_gem_object_free_unlocked);
-
 static void drm_gem_object_ref_bug(struct kref *list_kref)
 {
 	BUG();
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index 07e4726a4ee0..4c9461a4f9e6 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -808,7 +808,6 @@ struct drm_driver {
 	 */
 	int (*gem_init_object) (struct drm_gem_object *obj);
 	void (*gem_free_object) (struct drm_gem_object *obj);
-	void (*gem_free_object_unlocked) (struct drm_gem_object *obj);
 
 	/* vga arb irq handler */
 	void (*vgaarb_irq)(struct drm_device *dev, bool state);
@@ -1456,7 +1455,6 @@ int drm_gem_init(struct drm_device *dev);
 void drm_gem_destroy(struct drm_device *dev);
 void drm_gem_object_release(struct drm_gem_object *obj);
 void drm_gem_object_free(struct kref *kref);
-void drm_gem_object_free_unlocked(struct kref *kref);
 struct drm_gem_object *drm_gem_object_alloc(struct drm_device *dev,
 					    size_t size);
 int drm_gem_object_init(struct drm_device *dev,
@@ -1484,8 +1482,12 @@ drm_gem_object_unreference(struct drm_gem_object *obj)
 static inline void
 drm_gem_object_unreference_unlocked(struct drm_gem_object *obj)
 {
-	if (obj != NULL)
-		kref_put(&obj->refcount, drm_gem_object_free_unlocked);
+	if (obj != NULL) {
+		struct drm_device *dev = obj->dev;
+		mutex_lock(&dev->struct_mutex);
+		kref_put(&obj->refcount, drm_gem_object_free);
+		mutex_unlock(&dev->struct_mutex);
+	}
 }
 
 int drm_gem_handle_create(struct drm_file *file_priv,

From 2854eedae2ff35d95e8923bebdb942bbd537c54f Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Thu, 30 Sep 2010 12:18:33 +0200
Subject: [PATCH 658/728] drm/vmwgfx: Fix breakage introduced by commit "drm:
 block userspace under allocating buffer and having drivers overwrite it (v2)"

The mentioned commit breaks the vmwgfx ioctl argument sanity check.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 72ec2e2b6e97..292aeba385e0 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -500,7 +500,7 @@ static long vmw_unlocked_ioctl(struct file *filp, unsigned int cmd,
 		struct drm_ioctl_desc *ioctl =
 		    &vmw_ioctls[nr - DRM_COMMAND_BASE];
 
-		if (unlikely(ioctl->cmd != cmd)) {
+		if (unlikely(ioctl->cmd_drv != cmd)) {
 			DRM_ERROR("Invalid command format, ioctl %d\n",
 				  nr - DRM_COMMAND_BASE);
 			return -EINVAL;

From 30c78bb838b26ec7997515844c0c734e454b3cba Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 1 Oct 2010 10:21:48 +0200
Subject: [PATCH 659/728] vmwgfx: vt-switch (master drop) fixes

We add an option not to enable fbdev, this option is off (0) by default.
Not enabling fbdev at load time makes it possible to co-operate with
vga16fb and vga text mode when VT switching.

However, if 3D resources are active when VT switching, we're currently
not able to switch over to vga, due to device limitations.
This fixes a bug where we previously lost 3D state during VT switch.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c      | 102 ++++++++++++++++++++---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.h      |   7 ++
 drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c     |   3 +
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c      |  12 +++
 drivers/gpu/drm/vmwgfx/vmwgfx_resource.c |   4 +
 5 files changed, 115 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 292aeba385e0..23e29f3a0c33 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -149,12 +149,16 @@ static struct pci_device_id vmw_pci_id_list[] = {
 };
 
 static char *vmw_devname = "vmwgfx";
+static int enable_fbdev;
 
 static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
 static void vmw_master_init(struct vmw_master *);
 static int vmwgfx_pm_notifier(struct notifier_block *nb, unsigned long val,
 			      void *ptr);
 
+MODULE_PARM_DESC(enable_fbdev, "Enable vmwgfx fbdev");
+module_param_named(enable_fbdev, enable_fbdev, int, 0600);
+
 static void vmw_print_capabilities(uint32_t capabilities)
 {
 	DRM_INFO("Capabilities:\n");
@@ -192,8 +196,6 @@ static int vmw_request_device(struct vmw_private *dev_priv)
 {
 	int ret;
 
-	vmw_kms_save_vga(dev_priv);
-
 	ret = vmw_fifo_init(dev_priv, &dev_priv->fifo);
 	if (unlikely(ret != 0)) {
 		DRM_ERROR("Unable to initialize FIFO.\n");
@@ -206,9 +208,35 @@ static int vmw_request_device(struct vmw_private *dev_priv)
 static void vmw_release_device(struct vmw_private *dev_priv)
 {
 	vmw_fifo_release(dev_priv, &dev_priv->fifo);
-	vmw_kms_restore_vga(dev_priv);
 }
 
+int vmw_3d_resource_inc(struct vmw_private *dev_priv)
+{
+	int ret = 0;
+
+	mutex_lock(&dev_priv->release_mutex);
+	if (unlikely(dev_priv->num_3d_resources++ == 0)) {
+		ret = vmw_request_device(dev_priv);
+		if (unlikely(ret != 0))
+			--dev_priv->num_3d_resources;
+	}
+	mutex_unlock(&dev_priv->release_mutex);
+	return ret;
+}
+
+
+void vmw_3d_resource_dec(struct vmw_private *dev_priv)
+{
+	int32_t n3d;
+
+	mutex_lock(&dev_priv->release_mutex);
+	if (unlikely(--dev_priv->num_3d_resources == 0))
+		vmw_release_device(dev_priv);
+	n3d = (int32_t) dev_priv->num_3d_resources;
+	mutex_unlock(&dev_priv->release_mutex);
+
+	BUG_ON(n3d < 0);
+}
 
 static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 {
@@ -228,6 +256,7 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 	dev_priv->last_read_sequence = (uint32_t) -100;
 	mutex_init(&dev_priv->hw_mutex);
 	mutex_init(&dev_priv->cmdbuf_mutex);
+	mutex_init(&dev_priv->release_mutex);
 	rwlock_init(&dev_priv->resource_lock);
 	idr_init(&dev_priv->context_idr);
 	idr_init(&dev_priv->surface_idr);
@@ -244,6 +273,8 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 	dev_priv->vram_start = pci_resource_start(dev->pdev, 1);
 	dev_priv->mmio_start = pci_resource_start(dev->pdev, 2);
 
+	dev_priv->enable_fb = enable_fbdev;
+
 	mutex_lock(&dev_priv->hw_mutex);
 
 	vmw_write(dev_priv, SVGA_REG_ID, SVGA_ID_2);
@@ -369,20 +400,34 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 			goto out_no_device;
 		}
 	}
-	ret = vmw_request_device(dev_priv);
-	if (unlikely(ret != 0))
-		goto out_no_device;
 	vmw_kms_init(dev_priv);
 	vmw_overlay_init(dev_priv);
-	vmw_fb_init(dev_priv);
+	if (dev_priv->enable_fb) {
+		ret = vmw_3d_resource_inc(dev_priv);
+		if (unlikely(ret != 0))
+			goto out_no_fifo;
+		vmw_kms_save_vga(dev_priv);
+		vmw_fb_init(dev_priv);
+		DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ?
+			 "Detected device 3D availability.\n" :
+			 "Detected no device 3D availability.\n");
+	} else {
+		DRM_INFO("Delayed 3D detection since we're not "
+			 "running the device in SVGA mode yet.\n");
+	}
 
 	dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
 	register_pm_notifier(&dev_priv->pm_nb);
 
-	DRM_INFO("%s", vmw_fifo_have_3d(dev_priv) ? "Have 3D\n" : "No 3D\n");
-
 	return 0;
 
+out_no_fifo:
+	vmw_overlay_close(dev_priv);
+	vmw_kms_close(dev_priv);
+	if (dev_priv->stealth)
+		pci_release_region(dev->pdev, 2);
+	else
+		pci_release_regions(dev->pdev);
 out_no_device:
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
 		drm_irq_uninstall(dev_priv->dev);
@@ -415,10 +460,13 @@ static int vmw_driver_unload(struct drm_device *dev)
 
 	unregister_pm_notifier(&dev_priv->pm_nb);
 
-	vmw_fb_close(dev_priv);
+	if (dev_priv->enable_fb) {
+		vmw_fb_close(dev_priv);
+		vmw_kms_restore_vga(dev_priv);
+		vmw_3d_resource_dec(dev_priv);
+	}
 	vmw_kms_close(dev_priv);
 	vmw_overlay_close(dev_priv);
-	vmw_release_device(dev_priv);
 	if (dev_priv->stealth)
 		pci_release_region(dev->pdev, 2);
 	else
@@ -589,6 +637,16 @@ static int vmw_master_set(struct drm_device *dev,
 	struct vmw_master *vmaster = vmw_master(file_priv->master);
 	int ret = 0;
 
+	if (!dev_priv->enable_fb) {
+		ret = vmw_3d_resource_inc(dev_priv);
+		if (unlikely(ret != 0))
+			return ret;
+		vmw_kms_save_vga(dev_priv);
+		mutex_lock(&dev_priv->hw_mutex);
+		vmw_write(dev_priv, SVGA_REG_TRACES, 0);
+		mutex_unlock(&dev_priv->hw_mutex);
+	}
+
 	if (active) {
 		BUG_ON(active != &dev_priv->fbdev_master);
 		ret = ttm_vt_lock(&active->lock, false, vmw_fp->tfile);
@@ -617,7 +675,13 @@ static int vmw_master_set(struct drm_device *dev,
 	return 0;
 
 out_no_active_lock:
-	vmw_release_device(dev_priv);
+	if (!dev_priv->enable_fb) {
+		mutex_lock(&dev_priv->hw_mutex);
+		vmw_write(dev_priv, SVGA_REG_TRACES, 1);
+		mutex_unlock(&dev_priv->hw_mutex);
+		vmw_kms_restore_vga(dev_priv);
+		vmw_3d_resource_dec(dev_priv);
+	}
 	return ret;
 }
 
@@ -645,11 +709,23 @@ static void vmw_master_drop(struct drm_device *dev,
 
 	ttm_lock_set_kill(&vmaster->lock, true, SIGTERM);
 
+	if (!dev_priv->enable_fb) {
+		ret = ttm_bo_evict_mm(&dev_priv->bdev, TTM_PL_VRAM);
+		if (unlikely(ret != 0))
+			DRM_ERROR("Unable to clean VRAM on master drop.\n");
+		mutex_lock(&dev_priv->hw_mutex);
+		vmw_write(dev_priv, SVGA_REG_TRACES, 1);
+		mutex_unlock(&dev_priv->hw_mutex);
+		vmw_kms_restore_vga(dev_priv);
+		vmw_3d_resource_dec(dev_priv);
+	}
+
 	dev_priv->active_master = &dev_priv->fbdev_master;
 	ttm_lock_set_kill(&dev_priv->fbdev_master.lock, false, SIGTERM);
 	ttm_vt_unlock(&dev_priv->fbdev_master.lock);
 
-	vmw_fb_on(dev_priv);
+	if (dev_priv->enable_fb)
+		vmw_fb_on(dev_priv);
 }
 
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 429f917b60bf..9142454cc91e 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -277,6 +277,7 @@ struct vmw_private {
 
 	bool stealth;
 	bool is_opened;
+	bool enable_fb;
 
 	/**
 	 * Master management.
@@ -285,6 +286,9 @@ struct vmw_private {
 	struct vmw_master *active_master;
 	struct vmw_master fbdev_master;
 	struct notifier_block pm_nb;
+
+	struct mutex release_mutex;
+	uint32_t num_3d_resources;
 };
 
 static inline struct vmw_private *vmw_priv(struct drm_device *dev)
@@ -319,6 +323,9 @@ static inline uint32_t vmw_read(struct vmw_private *dev_priv,
 	return val;
 }
 
+int vmw_3d_resource_inc(struct vmw_private *dev_priv);
+void vmw_3d_resource_dec(struct vmw_private *dev_priv);
+
 /**
  * GMR utilities - vmwgfx_gmr.c
  */
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
index e6a1eb7ea954..0fe31766e4cf 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c
@@ -106,6 +106,7 @@ int vmw_fifo_init(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
 	mutex_lock(&dev_priv->hw_mutex);
 	dev_priv->enable_state = vmw_read(dev_priv, SVGA_REG_ENABLE);
 	dev_priv->config_done_state = vmw_read(dev_priv, SVGA_REG_CONFIG_DONE);
+	dev_priv->traces_state = vmw_read(dev_priv, SVGA_REG_TRACES);
 	vmw_write(dev_priv, SVGA_REG_ENABLE, 1);
 
 	min = 4;
@@ -175,6 +176,8 @@ void vmw_fifo_release(struct vmw_private *dev_priv, struct vmw_fifo_state *fifo)
 		  dev_priv->config_done_state);
 	vmw_write(dev_priv, SVGA_REG_ENABLE,
 		  dev_priv->enable_state);
+	vmw_write(dev_priv, SVGA_REG_TRACES,
+		  dev_priv->traces_state);
 
 	mutex_unlock(&dev_priv->hw_mutex);
 	vmw_fence_queue_takedown(&fifo->fence_queue);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 64d7f47df868..1636e9ba81a1 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -898,7 +898,19 @@ int vmw_kms_save_vga(struct vmw_private *vmw_priv)
 		save->width = vmw_read(vmw_priv, SVGA_REG_DISPLAY_WIDTH);
 		save->height = vmw_read(vmw_priv, SVGA_REG_DISPLAY_HEIGHT);
 		vmw_write(vmw_priv, SVGA_REG_DISPLAY_ID, SVGA_ID_INVALID);
+		if (i == 0 && vmw_priv->num_displays == 1 &&
+		    save->width == 0 && save->height == 0) {
+
+			/*
+			 * It should be fairly safe to assume that these
+			 * values are uninitialized.
+			 */
+
+			save->width = vmw_priv->vga_width - save->pos_x;
+			save->height = vmw_priv->vga_height - save->pos_y;
+		}
 	}
+
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 5f2d5df01e5c..c8c40e9979db 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -211,6 +211,7 @@ static void vmw_hw_context_destroy(struct vmw_resource *res)
 	cmd->body.cid = cpu_to_le32(res->id);
 
 	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+	vmw_3d_resource_dec(dev_priv);
 }
 
 static int vmw_context_init(struct vmw_private *dev_priv,
@@ -247,6 +248,7 @@ static int vmw_context_init(struct vmw_private *dev_priv,
 	cmd->body.cid = cpu_to_le32(res->id);
 
 	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+	(void) vmw_3d_resource_inc(dev_priv);
 	vmw_resource_activate(res, vmw_hw_context_destroy);
 	return 0;
 }
@@ -406,6 +408,7 @@ static void vmw_hw_surface_destroy(struct vmw_resource *res)
 	cmd->body.sid = cpu_to_le32(res->id);
 
 	vmw_fifo_commit(dev_priv, sizeof(*cmd));
+	vmw_3d_resource_dec(dev_priv);
 }
 
 void vmw_surface_res_free(struct vmw_resource *res)
@@ -473,6 +476,7 @@ int vmw_surface_init(struct vmw_private *dev_priv,
 	}
 
 	vmw_fifo_commit(dev_priv, submit_size);
+	(void) vmw_3d_resource_inc(dev_priv);
 	vmw_resource_activate(res, vmw_hw_surface_destroy);
 	return 0;
 }

From 7a1c2f6c8d8485af5ac6c2a313f6a7162207a4af Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 1 Oct 2010 10:21:49 +0200
Subject: [PATCH 660/728] vmwgfx: Enable use of the vblank system

This is to avoid accessing uninitialized data during
drm_irq_uninstall and vblank ioctls. At the same time, enable error check from
drm_kms_init which previously appeared to ignore all errors.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 47 ++++++++++++++++-------------
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.h |  1 +
 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c |  5 +++
 drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 27 +++++++++++------
 4 files changed, 49 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 23e29f3a0c33..6bbe703e7d97 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -374,17 +374,6 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 
 	dev->dev_private = dev_priv;
 
-	if (!dev->devname)
-		dev->devname = vmw_devname;
-
-	if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
-		ret = drm_irq_install(dev);
-		if (unlikely(ret != 0)) {
-			DRM_ERROR("Failed installing irq: %d\n", ret);
-			goto out_no_irq;
-		}
-	}
-
 	ret = pci_request_regions(dev->pdev, "vmwgfx probe");
 	dev_priv->stealth = (ret != 0);
 	if (dev_priv->stealth) {
@@ -400,7 +389,9 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 			goto out_no_device;
 		}
 	}
-	vmw_kms_init(dev_priv);
+	ret = vmw_kms_init(dev_priv);
+	if (unlikely(ret != 0))
+		goto out_no_kms;
 	vmw_overlay_init(dev_priv);
 	if (dev_priv->enable_fb) {
 		ret = vmw_3d_resource_inc(dev_priv);
@@ -416,24 +407,37 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 			 "running the device in SVGA mode yet.\n");
 	}
 
+	if (!dev->devname)
+		dev->devname = vmw_devname;
+
+	if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
+		ret = drm_irq_install(dev);
+		if (unlikely(ret != 0)) {
+			DRM_ERROR("Failed installing irq: %d\n", ret);
+			goto out_no_irq;
+		}
+	}
+
 	dev_priv->pm_nb.notifier_call = vmwgfx_pm_notifier;
 	register_pm_notifier(&dev_priv->pm_nb);
 
 	return 0;
 
+out_no_irq:
+	if (dev_priv->enable_fb) {
+		vmw_fb_close(dev_priv);
+		vmw_kms_restore_vga(dev_priv);
+		vmw_3d_resource_dec(dev_priv);
+	}
 out_no_fifo:
 	vmw_overlay_close(dev_priv);
 	vmw_kms_close(dev_priv);
+out_no_kms:
 	if (dev_priv->stealth)
 		pci_release_region(dev->pdev, 2);
 	else
 		pci_release_regions(dev->pdev);
 out_no_device:
-	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
-		drm_irq_uninstall(dev_priv->dev);
-	if (dev->devname == vmw_devname)
-		dev->devname = NULL;
-out_no_irq:
 	ttm_object_device_release(&dev_priv->tdev);
 out_err4:
 	iounmap(dev_priv->mmio_virt);
@@ -460,6 +464,10 @@ static int vmw_driver_unload(struct drm_device *dev)
 
 	unregister_pm_notifier(&dev_priv->pm_nb);
 
+	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
+		drm_irq_uninstall(dev_priv->dev);
+	if (dev->devname == vmw_devname)
+		dev->devname = NULL;
 	if (dev_priv->enable_fb) {
 		vmw_fb_close(dev_priv);
 		vmw_kms_restore_vga(dev_priv);
@@ -472,10 +480,6 @@ static int vmw_driver_unload(struct drm_device *dev)
 	else
 		pci_release_regions(dev->pdev);
 
-	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
-		drm_irq_uninstall(dev_priv->dev);
-	if (dev->devname == vmw_devname)
-		dev->devname = NULL;
 	ttm_object_device_release(&dev_priv->tdev);
 	iounmap(dev_priv->mmio_virt);
 	drm_mtrr_del(dev_priv->mmio_mtrr, dev_priv->mmio_start,
@@ -798,6 +802,7 @@ static struct drm_driver driver = {
 	.irq_postinstall = vmw_irq_postinstall,
 	.irq_uninstall = vmw_irq_uninstall,
 	.irq_handler = vmw_irq_handler,
+	.get_vblank_counter = vmw_get_vblank_counter,
 	.reclaim_buffers_locked = NULL,
 	.get_map_ofs = drm_core_get_map_ofs,
 	.get_reg_ofs = drm_core_get_reg_ofs,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
index 9142454cc91e..58de6393f611 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h
@@ -518,6 +518,7 @@ void vmw_kms_write_svga(struct vmw_private *vmw_priv,
 			unsigned bbp, unsigned depth);
 int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
+u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc);
 
 /**
  * Overlay control - vmwgfx_overlay.c
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 1636e9ba81a1..e882ba099f0c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -996,3 +996,8 @@ out_unlock:
 	ttm_read_unlock(&vmaster->lock);
 	return ret;
 }
+
+u32 vmw_get_vblank_counter(struct drm_device *dev, int crtc)
+{
+	return 0;
+}
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index 7083b1a24df3..11cb39e3accb 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -27,6 +27,8 @@
 
 #include "vmwgfx_kms.h"
 
+#define VMWGFX_LDU_NUM_DU 8
+
 #define vmw_crtc_to_ldu(x) \
 	container_of(x, struct vmw_legacy_display_unit, base.crtc)
 #define vmw_encoder_to_ldu(x) \
@@ -536,6 +538,10 @@ static int vmw_ldu_init(struct vmw_private *dev_priv, unsigned unit)
 
 int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
 {
+	struct drm_device *dev = dev_priv->dev;
+	int i;
+	int ret;
+
 	if (dev_priv->ldu_priv) {
 		DRM_INFO("ldu system already on\n");
 		return -EINVAL;
@@ -553,23 +559,24 @@ int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
 
 	drm_mode_create_dirty_info_property(dev_priv->dev);
 
-	vmw_ldu_init(dev_priv, 0);
-	/* for old hardware without multimon only enable one display */
 	if (dev_priv->capabilities & SVGA_CAP_MULTIMON) {
-		vmw_ldu_init(dev_priv, 1);
-		vmw_ldu_init(dev_priv, 2);
-		vmw_ldu_init(dev_priv, 3);
-		vmw_ldu_init(dev_priv, 4);
-		vmw_ldu_init(dev_priv, 5);
-		vmw_ldu_init(dev_priv, 6);
-		vmw_ldu_init(dev_priv, 7);
+		for (i = 0; i < VMWGFX_LDU_NUM_DU; ++i)
+			vmw_ldu_init(dev_priv, i);
+		ret = drm_vblank_init(dev, VMWGFX_LDU_NUM_DU);
+	} else {
+		/* for old hardware without multimon only enable one display */
+		vmw_ldu_init(dev_priv, 0);
+		ret = drm_vblank_init(dev, 1);
 	}
 
-	return 0;
+	return ret;
 }
 
 int vmw_kms_close_legacy_display_system(struct vmw_private *dev_priv)
 {
+	struct drm_device *dev = dev_priv->dev;
+
+	drm_vblank_cleanup(dev);
 	if (!dev_priv->ldu_priv)
 		return -ENOSYS;
 

From f1a28ee238bddfa48c5233543926af65a4445bf6 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 1 Oct 2010 10:21:50 +0200
Subject: [PATCH 661/728] vmwgfx: Remove initialisation of dev::devname

The removed code causes oopses with newer drms on master drop.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
index 6bbe703e7d97..a96ed6d9d010 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -148,7 +148,6 @@ static struct pci_device_id vmw_pci_id_list[] = {
 	{0, 0, 0}
 };
 
-static char *vmw_devname = "vmwgfx";
 static int enable_fbdev;
 
 static int vmw_probe(struct pci_dev *, const struct pci_device_id *);
@@ -407,9 +406,6 @@ static int vmw_driver_load(struct drm_device *dev, unsigned long chipset)
 			 "running the device in SVGA mode yet.\n");
 	}
 
-	if (!dev->devname)
-		dev->devname = vmw_devname;
-
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK) {
 		ret = drm_irq_install(dev);
 		if (unlikely(ret != 0)) {
@@ -466,8 +462,6 @@ static int vmw_driver_unload(struct drm_device *dev)
 
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
 		drm_irq_uninstall(dev_priv->dev);
-	if (dev->devname == vmw_devname)
-		dev->devname = NULL;
 	if (dev_priv->enable_fb) {
 		vmw_fb_close(dev_priv);
 		vmw_kms_restore_vga(dev_priv);

From abb295f3b3db602f91accf58b526b30b48673af1 Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thellstrom@vmware.com>
Date: Fri, 1 Oct 2010 10:21:51 +0200
Subject: [PATCH 662/728] vmwgfx: Fix fb VRAM pinning failure due to
 fragmentation

If the soon-to-be scanout buffer is partly covering the intended
VRAM region, move and pin will fail. In that case, just move it out
to system before attempting to move it in again.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 870967a97c15..409e172f4abf 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -615,6 +615,11 @@ int vmw_dmabuf_to_start_of_vram(struct vmw_private *vmw_priv,
 	if (unlikely(ret != 0))
 		goto err_unlock;
 
+	if (bo->mem.mem_type == TTM_PL_VRAM &&
+	    bo->mem.mm_node->start < bo->num_pages)
+		(void) ttm_bo_validate(bo, &vmw_sys_placement, false,
+				       false, false);
+
 	ret = ttm_bo_validate(bo, &ne_placement, false, false, false);
 
 	/* Could probably bug on */

From f569599ae70f0899035f8d5876a7939f629c5976 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 29 Sep 2010 15:27:08 -0400
Subject: [PATCH 663/728] cifs: prevent infinite recursion in
 cifs_reconnect_tcon

cifs_reconnect_tcon is called from smb_init. After a successful
reconnect, cifs_reconnect_tcon will call reset_cifs_unix_caps. That
function will, in turn call CIFSSMBQFSUnixInfo and CIFSSMBSetFSUnixInfo.
Those functions also call smb_init.

It's possible for the session and tcon reconnect to succeed, and then
for another cifs_reconnect to occur before CIFSSMBQFSUnixInfo or
CIFSSMBSetFSUnixInfo to be called. That'll cause those functions to call
smb_init and cifs_reconnect_tcon again, ad infinitum...

Break the infinite recursion by having those functions use a new
smb_init variant that doesn't attempt to perform a reconnect.

Reported-and-Tested-by: Michal Suchanek <hramrach@centrum.cz>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifssmb.c | 49 +++++++++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 16 deletions(-)

diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index c65c3419dd37..7e83b356cc9e 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -232,7 +232,7 @@ static int
 small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
 		void **request_buf)
 {
-	int rc = 0;
+	int rc;
 
 	rc = cifs_reconnect_tcon(tcon, smb_command);
 	if (rc)
@@ -250,7 +250,7 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
 	if (tcon != NULL)
 		cifs_stats_inc(&tcon->num_smbs_sent);
 
-	return rc;
+	return 0;
 }
 
 int
@@ -281,16 +281,9 @@ small_smb_init_no_tc(const int smb_command, const int wct,
 
 /* If the return code is zero, this function must fill in request_buf pointer */
 static int
-smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
-	 void **request_buf /* returned */ ,
-	 void **response_buf /* returned */ )
+__smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
+			void **request_buf, void **response_buf)
 {
-	int rc = 0;
-
-	rc = cifs_reconnect_tcon(tcon, smb_command);
-	if (rc)
-		return rc;
-
 	*request_buf = cifs_buf_get();
 	if (*request_buf == NULL) {
 		/* BB should we add a retry in here if not a writepage? */
@@ -309,7 +302,31 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
 	if (tcon != NULL)
 		cifs_stats_inc(&tcon->num_smbs_sent);
 
-	return rc;
+	return 0;
+}
+
+/* If the return code is zero, this function must fill in request_buf pointer */
+static int
+smb_init(int smb_command, int wct, struct cifsTconInfo *tcon,
+	 void **request_buf, void **response_buf)
+{
+	int rc;
+
+	rc = cifs_reconnect_tcon(tcon, smb_command);
+	if (rc)
+		return rc;
+
+	return __smb_init(smb_command, wct, tcon, request_buf, response_buf);
+}
+
+static int
+smb_init_no_reconnect(int smb_command, int wct, struct cifsTconInfo *tcon,
+			void **request_buf, void **response_buf)
+{
+	if (tcon->ses->need_reconnect || tcon->need_reconnect)
+		return -EHOSTDOWN;
+
+	return __smb_init(smb_command, wct, tcon, request_buf, response_buf);
 }
 
 static int validate_t2(struct smb_t2_rsp *pSMB)
@@ -4534,8 +4551,8 @@ CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon)
 
 	cFYI(1, "In QFSUnixInfo");
 QFSUnixRetry:
-	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-		      (void **) &pSMBr);
+	rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon,
+				   (void **) &pSMB, (void **) &pSMBr);
 	if (rc)
 		return rc;
 
@@ -4604,8 +4621,8 @@ CIFSSMBSetFSUnixInfo(const int xid, struct cifsTconInfo *tcon, __u64 cap)
 	cFYI(1, "In SETFSUnixInfo");
 SETFSUnixRetry:
 	/* BB switch to small buf init to save memory */
-	rc = smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB,
-		      (void **) &pSMBr);
+	rc = smb_init_no_reconnect(SMB_COM_TRANSACTION2, 15, tcon,
+					(void **) &pSMB, (void **) &pSMBr);
 	if (rc)
 		return rc;
 

From 399f1e30ac17b77d383444aff480c7390f5adf2a Mon Sep 17 00:00:00 2001
From: "Ira W. Snyder" <iws@ovro.caltech.edu>
Date: Thu, 30 Sep 2010 15:15:27 -0700
Subject: [PATCH 664/728] kfifo: fix scatterlist usage

The kfifo_dma family of functions use sg_mark_end() on the last element in
their scatterlist.  This forces use of a fresh scatterlist for each DMA
operation, which makes recycling a single scatterlist impossible.

Change the behavior of the kfifo_dma functions to match the usage of the
dma_map_sg function.  This means that users must respect the returned
nents value.  The sample code is updated to reflect the change.

This bug is trivial to cause: call kfifo_dma_in_prepare() such that it
prepares a scatterlist with a single entry comprising the whole fifo.
This is the case when you map the entirety of a newly created empty fifo.
This causes the setup_sgl() function to mark the first scatterlist entry
as the end of the chain, no matter what comes after it.

Afterwards, add and remove some data from the fifo such that another call
to kfifo_dma_in_prepare() will create two scatterlist entries.  It returns
nents=2.  However, due to the previous sg_mark_end() call, sg_is_last()
will now return true for the first scatterlist element.  This causes the
sample code to print a single scatterlist element when it should print
two.

By removing the call to sg_mark_end(), we make the API as similar as
possible to the DMA mapping API.  All users are required to respect the
returned nents.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/kfifo.c              |  2 --
 samples/kfifo/dma-example.c | 17 +++++++++--------
 2 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/kernel/kfifo.c b/kernel/kfifo.c
index 6b5580c57644..01a0700e873f 100644
--- a/kernel/kfifo.c
+++ b/kernel/kfifo.c
@@ -365,8 +365,6 @@ static unsigned int setup_sgl(struct __kfifo *fifo, struct scatterlist *sgl,
 	n = setup_sgl_buf(sgl, fifo->data + off, nents, l);
 	n += setup_sgl_buf(sgl + n, fifo->data, nents - n, len - l);
 
-	if (n)
-		sg_mark_end(sgl + n - 1);
 	return n;
 }
 
diff --git a/samples/kfifo/dma-example.c b/samples/kfifo/dma-example.c
index ee03a4f0b64f..06473791c08a 100644
--- a/samples/kfifo/dma-example.c
+++ b/samples/kfifo/dma-example.c
@@ -24,6 +24,7 @@ static int __init example_init(void)
 {
 	int			i;
 	unsigned int		ret;
+	unsigned int		nents;
 	struct scatterlist	sg[10];
 
 	printk(KERN_INFO "DMA fifo test start\n");
@@ -61,9 +62,9 @@ static int __init example_init(void)
 	 * byte at the beginning, after the kfifo_skip().
 	 */
 	sg_init_table(sg, ARRAY_SIZE(sg));
-	ret = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
-	printk(KERN_INFO "DMA sgl entries: %d\n", ret);
-	if (!ret) {
+	nents = kfifo_dma_in_prepare(&fifo, sg, ARRAY_SIZE(sg), FIFO_SIZE);
+	printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+	if (!nents) {
 		/* fifo is full and no sgl was created */
 		printk(KERN_WARNING "error kfifo_dma_in_prepare\n");
 		return -EIO;
@@ -71,7 +72,7 @@ static int __init example_init(void)
 
 	/* receive data */
 	printk(KERN_INFO "scatterlist for receive:\n");
-	for (i = 0; i < ARRAY_SIZE(sg); i++) {
+	for (i = 0; i < nents; i++) {
 		printk(KERN_INFO
 		"sg[%d] -> "
 		"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",
@@ -91,16 +92,16 @@ static int __init example_init(void)
 	kfifo_dma_in_finish(&fifo, ret);
 
 	/* Prepare to transmit data, example: 8 bytes */
-	ret = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
-	printk(KERN_INFO "DMA sgl entries: %d\n", ret);
-	if (!ret) {
+	nents = kfifo_dma_out_prepare(&fifo, sg, ARRAY_SIZE(sg), 8);
+	printk(KERN_INFO "DMA sgl entries: %d\n", nents);
+	if (!nents) {
 		/* no data was available and no sgl was created */
 		printk(KERN_WARNING "error kfifo_dma_out_prepare\n");
 		return -EIO;
 	}
 
 	printk(KERN_INFO "scatterlist for transmit:\n");
-	for (i = 0; i < ARRAY_SIZE(sg); i++) {
+	for (i = 0; i < nents; i++) {
 		printk(KERN_INFO
 		"sg[%d] -> "
 		"page_link 0x%.8lx offset 0x%.8x length 0x%.8x\n",

From 63d66cab4755edc86ddc5b78cae657a3fda908e1 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 30 Sep 2010 15:15:28 -0700
Subject: [PATCH 665/728] drivers/serial/mfd.c needs slab.h

alpha allmodconfig:

  drivers/serial/mfd.c:144: error: implicit declaration of function 'kzalloc'
  drivers/serial/mfd.c:144: warning: assignment makes pointer from integer without a cast

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/mfd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 324c385a653d..5dff45c76d32 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
+#include <linux/slab.h>
 #include <linux/serial_reg.h>
 #include <linux/circ_buf.h>
 #include <linux/delay.h>

From e53ced1b02a18fb006fc13c1658bb454ed6cf63c Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 30 Sep 2010 15:15:29 -0700
Subject: [PATCH 666/728] arch/m68k/mac/macboing.c: use unsigned long for
 irqflags

Fix the warnings

  arch/m68k/mac/macboing.c: In function 'mac_mksound':
  arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell':
  arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell':
  arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/mac/macboing.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/mac/macboing.c b/arch/m68k/mac/macboing.c
index 8f0640847ad2..05285d08e547 100644
--- a/arch/m68k/mac/macboing.c
+++ b/arch/m68k/mac/macboing.c
@@ -162,7 +162,7 @@ static void mac_init_asc( void )
 void mac_mksound( unsigned int freq, unsigned int length )
 {
 	__u32 cfreq = ( freq << 5 ) / 468;
-	__u32 flags;
+	unsigned long flags;
 	int i;
 
 	if ( mac_special_bell == NULL )
@@ -224,7 +224,7 @@ static void mac_nosound( unsigned long ignored )
  */
 static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsigned int volume )
 {
-	__u32 flags;
+	unsigned long flags;
 
 	/* if the bell is already ringing, ring longer */
 	if ( mac_bell_duration > 0 )
@@ -271,7 +271,7 @@ static void mac_quadra_start_bell( unsigned int freq, unsigned int length, unsig
 static void mac_quadra_ring_bell( unsigned long ignored )
 {
 	int	i, count = mac_asc_samplespersec / HZ;
-	__u32 flags;
+	unsigned long flags;
 
 	/*
 	 * we neither want a sound buffer overflow nor underflow, so we need to match

From c044391bd82f3b165f9d93937fdc2740da0bab34 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 30 Sep 2010 15:15:29 -0700
Subject: [PATCH 667/728] drivers/serial/mrst_max3110.c needs linux/irq.h

sparc64 allmodconfig:

  drivers/serial/mrst_max3110.c: In function `serial_m3110_startup':
  drivers/serial/mrst_max3110.c:470: error: `IRQ_TYPE_EDGE_FALLING' undeclared (first use in this function)

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/mrst_max3110.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/serial/mrst_max3110.c b/drivers/serial/mrst_max3110.c
index f6ad1ecbff79..51c15f58e01e 100644
--- a/drivers/serial/mrst_max3110.c
+++ b/drivers/serial/mrst_max3110.c
@@ -29,6 +29,7 @@
 
 #include <linux/module.h>
 #include <linux/ioport.h>
+#include <linux/irq.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>

From 64aab720bdf8771214a7c88872bd8e3194c2d279 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Thu, 30 Sep 2010 15:15:30 -0700
Subject: [PATCH 668/728] i7core_edac: fix panic in udimm sysfs attributes
 registration

Array of udimm sysfs attributes was not ended with NULL marker, leading to
dereference of random memory.

  EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm0
  EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm1
  EDAC DEBUG: edac_create_mci_instance_attributes: edac_create_mci_instance_attributes() file udimm2
  BUG: unable to handle kernel NULL pointer dereference at 00000000000001a4
  IP: [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1
  Pid: 1, comm: swapper Not tainted 2.6.36-rc3-nv+ #483 P6T SE/System Product Name
  RIP: 0010:[<ffffffff81330b36>]  [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1
  (...)
  Call Trace:
   [<ffffffff81330b86>] edac_create_mci_instance_attributes+0x198/0x1f1
   [<ffffffff81330c9a>] edac_create_sysfs_mci_device+0xbb/0x2b2
   [<ffffffff8132f533>] edac_mc_add_mc+0x46b/0x557
   [<ffffffff81428901>] i7core_probe+0xccf/0xec0
  RIP  [<ffffffff81330b36>] edac_create_mci_instance_attributes+0x148/0x1f1
  ---[ end trace 20de320855b81d78 ]---
  Kernel panic - not syncing: Attempted to kill init!

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/edac/i7core_edac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index e0187d16dd7c..0fd5b85a0f75 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1140,6 +1140,7 @@ static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
 	ATTR_COUNTER(0),
 	ATTR_COUNTER(1),
 	ATTR_COUNTER(2),
+	{ .attr = { .name = NULL } }
 };
 
 static struct mcidev_sysfs_group i7core_udimm_counters = {

From 982f7c2b2e6a28f8f266e075d92e19c0dd4c6e56 Mon Sep 17 00:00:00 2001
From: Dan Rosenberg <drosenberg@vsecurity.com>
Date: Thu, 30 Sep 2010 15:15:31 -0700
Subject: [PATCH 669/728] sys_semctl: fix kernel stack leakage

The semctl syscall has several code paths that lead to the leakage of
uninitialized kernel stack memory (namely the IPC_INFO, SEM_INFO,
IPC_STAT, and SEM_STAT commands) during the use of the older, obsolete
version of the semid_ds struct.

The copy_semid_to_user() function declares a semid_ds struct on the stack
and copies it back to the user without initializing or zeroing the
"sem_base", "sem_pending", "sem_pending_last", and "undo" pointers,
allowing the leakage of 16 bytes of kernel stack memory.

The code is still reachable on 32-bit systems - when calling semctl()
newer glibc's automatically OR the IPC command with the IPC_64 flag, but
invoking the syscall directly allows users to use the older versions of
the struct.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 ipc/sem.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/ipc/sem.c b/ipc/sem.c
index 40a8f462a822..0e0d49bbb867 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -743,6 +743,8 @@ static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in,
 	    {
 		struct semid_ds out;
 
+		memset(&out, 0, sizeof(out));
+
 		ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);
 
 		out.sem_otime	= in->sem_otime;

From f015ac3edd84ad72f88e08a4d83c56c360aae404 Mon Sep 17 00:00:00 2001
From: Don Mullis <don.mullis@gmail.com>
Date: Thu, 30 Sep 2010 15:15:32 -0700
Subject: [PATCH 670/728] lib/list_sort: do not pass bad pointers to cmp
 callback

If the original list is a POT in length, the first callback from line 73
will pass a==b both pointing to the original list_head.  This is dangerous
because the 'list_sort()' user can use 'container_of()' and accesses the
"containing" object, which does not necessary exist for the list head.  So
the user can access RAM which does not belong to him.  If this is a write
access, we can end up with memory corruption.

Signed-off-by: Don Mullis <don.mullis@gmail.com>
Tested-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/list_sort.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/list_sort.c b/lib/list_sort.c
index 4b5cb794c38b..a7616fa3162e 100644
--- a/lib/list_sort.c
+++ b/lib/list_sort.c
@@ -70,7 +70,7 @@ static void merge_and_restore_back_links(void *priv,
 		 * element comparison is needed, so the client's cmp()
 		 * routine can invoke cond_resched() periodically.
 		 */
-		(*cmp)(priv, tail, tail);
+		(*cmp)(priv, tail->next, tail->next);
 
 		tail->next->prev = tail;
 		tail = tail->next;

From 3036e7b490bf7878c6dae952eec5fb87b1106589 Mon Sep 17 00:00:00 2001
From: Jiri Olsa <jolsa@redhat.com>
Date: Thu, 30 Sep 2010 15:15:33 -0700
Subject: [PATCH 671/728] proc: make /proc/pid/limits world readable

Having the limits file world readable will ease the task of system
management on systems where root privileges might be restricted.

Having admin restricted with root priviledges, he/she could not check
other users process' limits.

Also it'd align with most of the /proc stat files.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Eugene Teo <eugene@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/base.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/proc/base.c b/fs/proc/base.c
index a1c43e7c8a7b..8e4addaa5424 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -2675,7 +2675,7 @@ static const struct pid_entry tgid_base_stuff[] = {
 	INF("auxv",       S_IRUSR, proc_pid_auxv),
 	ONE("status",     S_IRUGO, proc_pid_status),
 	ONE("personality", S_IRUSR, proc_pid_personality),
-	INF("limits",	  S_IRUSR, proc_pid_limits),
+	INF("limits",	  S_IRUGO, proc_pid_limits),
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",      S_IRUGO|S_IWUSR, proc_pid_sched_operations),
 #endif
@@ -3011,7 +3011,7 @@ static const struct pid_entry tid_base_stuff[] = {
 	INF("auxv",      S_IRUSR, proc_pid_auxv),
 	ONE("status",    S_IRUGO, proc_pid_status),
 	ONE("personality", S_IRUSR, proc_pid_personality),
-	INF("limits",	 S_IRUSR, proc_pid_limits),
+	INF("limits",	 S_IRUGO, proc_pid_limits),
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",     S_IRUGO|S_IWUSR, proc_pid_sched_operations),
 #endif

From 52653199d7b02e4c3d4b6ac430de68b83116af0e Mon Sep 17 00:00:00 2001
From: Petr Vandrovec <petr@vandrovec.name>
Date: Thu, 30 Sep 2010 15:15:34 -0700
Subject: [PATCH 672/728] MAINTAINERS: update matroxfb & ncpfs status

I moved couple years ago, so let's update my email and snail mail.

And I do not have any access to Matrox hardware anymore, and I'm quite
unresponsive to matroxfb bug reports (sorry Alan), so saying that I'm
maintainer is a bit far fetched.

For ncpfs I do not use ncpfs in my daily life either, but at least I can
test that one, so I can stay listed here for odd fixes.

Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 CREDITS     | 8 ++++----
 MAINTAINERS | 7 +++----
 2 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/CREDITS b/CREDITS
index 72b487869788..41d8e63d5165 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3554,12 +3554,12 @@ E: cvance@nai.com
 D: portions of the Linux Security Module (LSM) framework and security modules
 
 N: Petr Vandrovec
-E: vandrove@vc.cvut.cz
+E: petr@vandrovec.name
 D: Small contributions to ncpfs
 D: Matrox framebuffer driver
-S: Chudenicka 8
-S: 10200 Prague 10, Hostivar
-S: Czech Republic
+S: 21513 Conradia Ct
+S: Cupertino, CA 95014
+S: USA
 
 N: Thibaut Varene
 E: T-Bone@parisc-linux.org
diff --git a/MAINTAINERS b/MAINTAINERS
index 668682d1f5fa..24f3deece17e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3781,9 +3781,8 @@ W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
@@ -3970,8 +3969,8 @@ S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-M:	Petr Vandrovec <vandrove@vc.cvut.cz>
-S:	Maintained
+M:	Petr Vandrovec <petr@vandrovec.name>
+S:	Odd Fixes
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)

From f556cb078a3a11f6bcb203040fe014caaa6710c4 Mon Sep 17 00:00:00 2001
From: Kukjin Kim <kgene.kim@samsung.com>
Date: Thu, 30 Sep 2010 15:15:35 -0700
Subject: [PATCH 673/728] MAINTAINERS: update maintainer for S5P ARM
 ARCHITECTURES

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 24f3deece17e..f46d8e66333f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -962,6 +962,13 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c6410/
 
+ARM/S5P ARM ARCHITECTURES
+M:	Kukjin Kim <kgene.kim@samsung.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-s5p*/
+
 ARM/SHMOBILE ARM ARCHITECTURE
 M:	Paul Mundt <lethal@linux-sh.org>
 M:	Magnus Damm <magnus.damm@gmail.com>

From 3f259d092c7a2fdf217823e8f1838530adb0cdb0 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu, 30 Sep 2010 15:15:37 -0700
Subject: [PATCH 674/728] reiserfs: fix dependency inversion between inode and
 reiserfs mutexes

The reiserfs mutex already depends on the inode mutex, so we can't lock
the inode mutex in reiserfs_unpack() without using the safe locking API,
because reiserfs_unpack() is always called with the reiserfs mutex locked.

This fixes:

  =======================================================
  [ INFO: possible circular locking dependency detected ]
  2.6.35c #13
  -------------------------------------------------------
  lilo/1606 is trying to acquire lock:
   (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]

  but task is already holding lock:
   (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
         [<c1056347>] lock_acquire+0x67/0x80
         [<c12f083d>] __mutex_lock_common+0x4d/0x410
         [<c12f0c58>] mutex_lock_nested+0x18/0x20
         [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]
         [<d0329e9a>] reiserfs_lookup_privroot+0x2a/0x90 [reiserfs]
         [<d0316b81>] reiserfs_fill_super+0x941/0xe60 [reiserfs]
         [<c10b7d17>] get_sb_bdev+0x117/0x170
         [<d0313e21>] get_super_block+0x21/0x30 [reiserfs]
         [<c10b74ba>] vfs_kern_mount+0x6a/0x1b0
         [<c10b7659>] do_kern_mount+0x39/0xe0
         [<c10cebe0>] do_mount+0x340/0x790
         [<c10cf0b4>] sys_mount+0x84/0xb0
         [<c12f25cd>] syscall_call+0x7/0xb

  -> #0 (&sb->s_type->i_mutex_key#8){+.+.+.}:
         [<c1056186>] __lock_acquire+0x1026/0x1180
         [<c1056347>] lock_acquire+0x67/0x80
         [<c12f083d>] __mutex_lock_common+0x4d/0x410
         [<c12f0c58>] mutex_lock_nested+0x18/0x20
         [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
         [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs]
         [<c10c3228>] vfs_ioctl+0x28/0xa0
         [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0
         [<c10c3f53>] sys_ioctl+0x63/0x70
         [<c12f25cd>] syscall_call+0x7/0xb

  other info that might help us debug this:

  1 lock held by lilo/1606:
   #0:  (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a268>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  stack backtrace:
  Pid: 1606, comm: lilo Not tainted 2.6.35c #13
  Call Trace:
   [<c1056186>] __lock_acquire+0x1026/0x1180
   [<c1056347>] lock_acquire+0x67/0x80
   [<c12f083d>] __mutex_lock_common+0x4d/0x410
   [<c12f0c58>] mutex_lock_nested+0x18/0x20
   [<d0329450>] reiserfs_unpack+0x60/0x110 [reiserfs]
   [<d0329772>] reiserfs_ioctl+0x272/0x320 [reiserfs]
   [<c10c3228>] vfs_ioctl+0x28/0xa0
   [<c10c3c5d>] do_vfs_ioctl+0x32d/0x5c0
   [<c10c3f53>] sys_ioctl+0x63/0x70
   [<c12f25cd>] syscall_call+0x7/0xb

Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: <stable@kernel.org>		[2.6.32 and later]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index f53505de0712..679d5029f50f 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -188,7 +188,7 @@ int reiserfs_unpack(struct inode *inode, struct file *filp)
 	/* we need to make sure nobody is changing the file size beneath
 	 ** us
 	 */
-	mutex_lock(&inode->i_mutex);
+	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
 	reiserfs_write_lock(inode->i_sb);
 
 	write_from = inode->i_size & (blocksize - 1);

From 9d8117e72bf453dd9d85e0cd322ce4a0f8bccbc0 Mon Sep 17 00:00:00 2001
From: Frederic Weisbecker <fweisbec@gmail.com>
Date: Thu, 30 Sep 2010 15:15:38 -0700
Subject: [PATCH 675/728] reiserfs: fix unwanted reiserfs lock recursion

Prevent from recursively locking the reiserfs lock in reiserfs_unpack()
because we may call journal_begin() that requires the lock to be taken
only once, otherwise it won't be able to release the lock while taking
other mutexes, ending up in inverted dependencies between the journal
mutex and the reiserfs lock for example.

This fixes:

  =======================================================
  [ INFO: possible circular locking dependency detected ]
  2.6.35.4.4a #3
  -------------------------------------------------------
  lilo/1620 is trying to acquire lock:
   (&journal->j_mutex){+.+...}, at: [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]

  but task is already holding lock:
   (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (&REISERFS_SB(s)->lock){+.+.+.}:
         [<c10562b7>] lock_acquire+0x67/0x80
         [<c12facad>] __mutex_lock_common+0x4d/0x410
         [<c12fb0c8>] mutex_lock_nested+0x18/0x20
         [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]
         [<d0325c06>] do_journal_begin_r+0x86/0x340 [reiserfs]
         [<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
         [<d0315be4>] reiserfs_remount+0x224/0x530 [reiserfs]
         [<c10b6a20>] do_remount_sb+0x60/0x110
         [<c10cee25>] do_mount+0x625/0x790
         [<c10cf014>] sys_mount+0x84/0xb0
         [<c12fca3d>] syscall_call+0x7/0xb

  -> #0 (&journal->j_mutex){+.+...}:
         [<c10560f6>] __lock_acquire+0x1026/0x1180
         [<c10562b7>] lock_acquire+0x67/0x80
         [<c12facad>] __mutex_lock_common+0x4d/0x410
         [<c12fb0c8>] mutex_lock_nested+0x18/0x20
         [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
         [<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
         [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs]
         [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs]
         [<c10db9db>] __block_prepare_write+0x1bb/0x3a0
         [<c10dbbe6>] block_prepare_write+0x26/0x40
         [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs]
         [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs]
         [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs]
         [<c10c3188>] vfs_ioctl+0x28/0xa0
         [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0
         [<c10c3eb3>] sys_ioctl+0x63/0x70
         [<c12fca3d>] syscall_call+0x7/0xb

  other info that might help us debug this:

  2 locks held by lilo/1620:
   #0:  (&sb->s_type->i_mutex_key#8){+.+.+.}, at: [<d032945a>] reiserfs_unpack+0x6a/0x120 [reiserfs]
   #1:  (&REISERFS_SB(s)->lock){+.+.+.}, at: [<d032a278>] reiserfs_write_lock+0x28/0x40 [reiserfs]

  stack backtrace:
  Pid: 1620, comm: lilo Not tainted 2.6.35.4.4a #3
  Call Trace:
   [<c10560f6>] __lock_acquire+0x1026/0x1180
   [<c10562b7>] lock_acquire+0x67/0x80
   [<c12facad>] __mutex_lock_common+0x4d/0x410
   [<c12fb0c8>] mutex_lock_nested+0x18/0x20
   [<d0325bff>] do_journal_begin_r+0x7f/0x340 [reiserfs]
   [<d0325f77>] journal_begin+0x77/0x140 [reiserfs]
   [<d0326271>] reiserfs_persistent_transaction+0x41/0x90 [reiserfs]
   [<d030d06c>] reiserfs_get_block+0x22c/0x1530 [reiserfs]
   [<c10db9db>] __block_prepare_write+0x1bb/0x3a0
   [<c10dbbe6>] block_prepare_write+0x26/0x40
   [<d030b738>] reiserfs_prepare_write+0x88/0x170 [reiserfs]
   [<d03294d6>] reiserfs_unpack+0xe6/0x120 [reiserfs]
   [<d0329782>] reiserfs_ioctl+0x272/0x320 [reiserfs]
   [<c10c3188>] vfs_ioctl+0x28/0xa0
   [<c10c3bbd>] do_vfs_ioctl+0x32d/0x5c0
   [<c10c3eb3>] sys_ioctl+0x63/0x70
   [<c12fca3d>] syscall_call+0x7/0xb

Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Tested-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: All since 2.6.32 <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/reiserfs/ioctl.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index 679d5029f50f..5cbb81e134ac 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -170,6 +170,7 @@ int reiserfs_prepare_write(struct file *f, struct page *page,
 int reiserfs_unpack(struct inode *inode, struct file *filp)
 {
 	int retval = 0;
+	int depth;
 	int index;
 	struct page *page;
 	struct address_space *mapping;
@@ -189,7 +190,7 @@ int reiserfs_unpack(struct inode *inode, struct file *filp)
 	 ** us
 	 */
 	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
-	reiserfs_write_lock(inode->i_sb);
+	depth = reiserfs_write_lock_once(inode->i_sb);
 
 	write_from = inode->i_size & (blocksize - 1);
 	/* if we are on a block boundary, we are already unpacked.  */
@@ -224,6 +225,6 @@ int reiserfs_unpack(struct inode *inode, struct file *filp)
 
       out:
 	mutex_unlock(&inode->i_mutex);
-	reiserfs_write_unlock(inode->i_sb);
+	reiserfs_write_unlock_once(inode->i_sb, depth);
 	return retval;
 }

From 57cf4f78c6266d5a6e5de5485065d4015b84bb30 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Fri, 1 Oct 2010 10:31:03 +0100
Subject: [PATCH 676/728] MN10300: Fix flush_icache_range()

flush_icache_range() is given virtual addresses to describe the region.  It
deals with these by attempting to translate them through the current set of
page tables.

This is fine for userspace memory and vmalloc()'d areas as they are governed by
page tables.  However, since the regions above 0x80000000 aren't translated
through the page tables by the MMU, the kernel doesn't bother to set up page
tables for them (see paging_init()).

This means flush_icache_range() as it stands cannot be used to flush regions of
the VM area between 0x80000000 and 0x9fffffff where the kernel resides if the
data cache is operating in WriteBack mode.

To fix this, make flush_icache_range() first check for addresses in the upper
half of VM space and deal with them appropriately, before dealing with any
range in the page table mapped area.

Ordinarily, this is not a problem, but it has the capacity to make kprobes and
kgdb malfunction.  It should not affect gdbstub, signal frame setup or module
loading as gdb has its own flush functions, and the others take place in the
page table mapped area only.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/mn10300/mm/cache.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/mn10300/mm/cache.c b/arch/mn10300/mm/cache.c
index 1b76719ec1c3..9261217e8d2c 100644
--- a/arch/mn10300/mm/cache.c
+++ b/arch/mn10300/mm/cache.c
@@ -54,13 +54,30 @@ EXPORT_SYMBOL(flush_icache_page);
 void flush_icache_range(unsigned long start, unsigned long end)
 {
 #ifdef CONFIG_MN10300_CACHE_WBACK
-	unsigned long addr, size, off;
+	unsigned long addr, size, base, off;
 	struct page *page;
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *ppte, pte;
 
+	if (end > 0x80000000UL) {
+		/* addresses above 0xa0000000 do not go through the cache */
+		if (end > 0xa0000000UL) {
+			end = 0xa0000000UL;
+			if (start >= end)
+				return;
+		}
+
+		/* kernel addresses between 0x80000000 and 0x9fffffff do not
+		 * require page tables, so we just map such addresses directly */
+		base = (start >= 0x80000000UL) ? start : 0x80000000UL;
+		mn10300_dcache_flush_range(base, end);
+		if (base == start)
+			goto invalidate;
+		end = base;
+	}
+
 	for (; start < end; start += size) {
 		/* work out how much of the page to flush */
 		off = start & (PAGE_SIZE - 1);
@@ -104,6 +121,7 @@ void flush_icache_range(unsigned long start, unsigned long end)
 	}
 #endif
 
+invalidate:
 	mn10300_icache_inv();
 }
 EXPORT_SYMBOL(flush_icache_range);

From ad7725cb43b8badb2fec2c2bfca07c067f2e19a7 Mon Sep 17 00:00:00 2001
From: Vasiliy Kulikov <segooon@gmail.com>
Date: Sun, 19 Sep 2010 16:55:01 +0400
Subject: [PATCH 677/728] regulator: fix device_register() error handling

If device_register() fails then call put_device().
See comment to device_register.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 422a709d271d..a43eedb214bb 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2302,8 +2302,10 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	dev_set_name(&rdev->dev, "regulator.%d",
 		     atomic_inc_return(&regulator_no) - 1);
 	ret = device_register(&rdev->dev);
-	if (ret != 0)
+	if (ret != 0) {
+		put_device(&rdev->dev);
 		goto clean;
+	}
 
 	dev_set_drvdata(&rdev->dev, rdev);
 

From e4a6376b3b2999d169b602a582a8819d95ff79bc Mon Sep 17 00:00:00 2001
From: Cyril Chemparathy <cyril@ti.com>
Date: Wed, 22 Sep 2010 12:30:15 -0400
Subject: [PATCH 678/728] regulator: fix typo in current units

This patch fixes a typo that incorrectly reports mA numbers as uA.

Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a43eedb214bb..cc8b337b9119 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -700,7 +700,7 @@ static void print_constraints(struct regulator_dev *rdev)
 	    constraints->min_uA != constraints->max_uA) {
 		ret = _regulator_get_current_limit(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d uA ", ret / 1000);
+			count += sprintf(buf + count, "at %d mA ", ret / 1000);
 	}
 
 	if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)

From 0f69c897f378bf975c519b1d2455c03d06477dfa Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Fri, 1 Oct 2010 13:56:27 +0800
Subject: [PATCH 679/728] regulator: max8649 - fix setting extclk_freq

The SYNC bits are BIT6 and BIT7 of MAX8649_SYNC register.
pdata->extclk_freq could be [0|1|2].
(MAX8649_EXTCLK_26MHZ|MAX8649_EXTCLK_13MHZ|MAX8649_EXTCLK_19MHZ)
It requires to left shift 6 bits to properly set extclk_freq.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
---
 drivers/regulator/max8649.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 4520ace3f7e7..6b60a9c0366b 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -330,7 +330,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 		/* set external clock frequency */
 		info->extclk_freq = pdata->extclk_freq;
 		max8649_set_bits(info->i2c, MAX8649_SYNC, MAX8649_EXT_MASK,
-				 info->extclk_freq);
+				 info->extclk_freq << 6);
 	}
 
 	if (pdata->ramp_timing) {

From 929f49bf225b1b6cd04d0a7b9c0f7377d9131220 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 2 Oct 2010 15:59:17 +0200
Subject: [PATCH 680/728] drivers/gpu/drm/i915/i915_gem.c: Add missing error
 handling code

Extend the error handling code with operations found in other nearby error
handling code

A simplified version of the sematic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
@r@
statement S1,S2,S3;
constant C1,C2,C3;
@@

*if (...)
 {... S1 return -C1;}
...
*if (...)
 {... when != S1
    return -C2;}
...
*if (...)
 {... S1 return -C3;}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_gem.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index bced9b25c71e..cfe597865f5d 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -3258,6 +3258,8 @@ i915_gem_object_pin_and_relocate(struct drm_gem_object *obj,
 				  (int) reloc->offset,
 				  reloc->read_domains,
 				  reloc->write_domain);
+			drm_gem_object_unreference(target_obj);
+			i915_gem_object_unpin(obj);
 			return -EINVAL;
 		}
 		if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||

From 23699f98f84f20195fddd0263d05a8ccb8694676 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Sat, 2 Oct 2010 14:03:32 +0200
Subject: [PATCH 681/728] spi: spi-gpio.c tests SPI_MASTER_NO_RX bit twice, but
 not SPI_MASTER_NO_TX

The SPI_MASTER_NO_TX bit (can't do buffer write) wasn't tested.  This
code was introduced in commit 3c8e1a84 (spi/spi-gpio: add support for
controllers without MISO or MOSI pin).  This patch fixes a bug in
choosing which transfer ops to use.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi_gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/spi/spi_gpio.c b/drivers/spi/spi_gpio.c
index e24a63498acb..63e51b011d50 100644
--- a/drivers/spi/spi_gpio.c
+++ b/drivers/spi/spi_gpio.c
@@ -350,7 +350,7 @@ static int __init spi_gpio_probe(struct platform_device *pdev)
 	spi_gpio->bitbang.master = spi_master_get(master);
 	spi_gpio->bitbang.chipselect = spi_gpio_chipselect;
 
-	if ((master_flags & (SPI_MASTER_NO_RX | SPI_MASTER_NO_RX)) == 0) {
+	if ((master_flags & (SPI_MASTER_NO_TX | SPI_MASTER_NO_RX)) == 0) {
 		spi_gpio->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_word_mode0;
 		spi_gpio->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_word_mode1;
 		spi_gpio->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_word_mode2;

From 2b7a32f7ecb24d01bd0b2d5097d7c7ebe7082ba7 Mon Sep 17 00:00:00 2001
From: Sinan Akman <sinan@writeme.com>
Date: Sat, 2 Oct 2010 21:28:29 -0600
Subject: [PATCH 682/728] of/spi: Fix OF-style driver binding of spi devices

This patch adds the OF hook to the spi core so that devices
can automatically be registered based on device tree data.  This fixes
a problem with spi devices not binding to drivers after the cleanup of
the spi & i2c binding code.

Signed-off-by: Sinan Akman <sinan@writeme.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/spi/spi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 0bcf4c1601a2..b5a78a1f4421 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/cache.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/slab.h>
 #include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
@@ -86,6 +87,10 @@ static int spi_match_device(struct device *dev, struct device_driver *drv)
 	const struct spi_device	*spi = to_spi_device(dev);
 	const struct spi_driver	*sdrv = to_spi_driver(drv);
 
+	/* Attempt an OF style match */
+	if (of_driver_match_device(dev, drv))
+		return 1;
+
 	if (sdrv->id_table)
 		return !!spi_match_id(sdrv->id_table, spi);
 

From b99a9d9bb62a984bdfcb6c973dfe180bd776abbe Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Sun, 3 Oct 2010 00:33:05 -0700
Subject: [PATCH 683/728] drm/i915: vblank status not valid while training
 display port

While the display port is in training mode, vblank interrupts don't
occur. Because we have to wait for the display port output to turn on
before starting the training sequence, enable the output in 'normal'
mode so that we can tell when a vblank has occurred, then start the
training sequence.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_dp.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 1a51ee07de3e..9ab8708ac6ba 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1138,18 +1138,14 @@ static bool
 intel_dp_set_link_train(struct intel_dp *intel_dp,
 			uint32_t dp_reg_value,
 			uint8_t dp_train_pat,
-			uint8_t train_set[4],
-			bool first)
+			uint8_t train_set[4])
 {
 	struct drm_device *dev = intel_dp->base.enc.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
 	int ret;
 
 	I915_WRITE(intel_dp->output_reg, dp_reg_value);
 	POSTING_READ(intel_dp->output_reg);
-	if (first)
-		intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	intel_dp_aux_native_write_1(intel_dp,
 				    DP_TRAINING_PATTERN_SET,
@@ -1174,10 +1170,15 @@ intel_dp_link_train(struct intel_dp *intel_dp)
 	uint8_t voltage;
 	bool clock_recovery = false;
 	bool channel_eq = false;
-	bool first = true;
 	int tries;
 	u32 reg;
 	uint32_t DP = intel_dp->DP;
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.enc.crtc);
+
+	/* Enable output, wait for it to become active */
+	I915_WRITE(intel_dp->output_reg, intel_dp->DP);
+	POSTING_READ(intel_dp->output_reg);
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
 	/* Write the link configuration data */
 	intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
@@ -1210,9 +1211,8 @@ intel_dp_link_train(struct intel_dp *intel_dp)
 			reg = DP | DP_LINK_TRAIN_PAT_1;
 
 		if (!intel_dp_set_link_train(intel_dp, reg,
-					     DP_TRAINING_PATTERN_1, train_set, first))
+					     DP_TRAINING_PATTERN_1, train_set))
 			break;
-		first = false;
 		/* Set training pattern 1 */
 
 		udelay(100);
@@ -1266,8 +1266,7 @@ intel_dp_link_train(struct intel_dp *intel_dp)
 
 		/* channel eq pattern */
 		if (!intel_dp_set_link_train(intel_dp, reg,
-					     DP_TRAINING_PATTERN_2, train_set,
-					     false))
+					     DP_TRAINING_PATTERN_2, train_set))
 			break;
 
 		udelay(400);

From ab7ad7f6451580aa7eccc0ba62807c872088a8f9 Mon Sep 17 00:00:00 2001
From: Keith Packard <keithp@keithp.com>
Date: Sun, 3 Oct 2010 00:33:06 -0700
Subject: [PATCH 684/728] drm/i915: Use pipe state to tell when pipe is off

Instead of waiting for the display line value to settle, we can simply
wait for the pipe configuration register 'state' bit to turn off.

Contrarywise, disabling the plane will not cause the display line
value to stop changing, so instead we wait for the vblank interrupt
bit to get set. And, we only do this when we're not about to wait for
the pipe to turn off.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
---
 drivers/gpu/drm/i915/intel_display.c | 58 +++++++++++++++++-----------
 drivers/gpu/drm/i915/intel_drv.h     |  1 -
 2 files changed, 36 insertions(+), 23 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b5bf51a4502d..979228594599 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1013,8 +1013,8 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 		DRM_DEBUG_KMS("vblank wait timed out\n");
 }
 
-/**
- * intel_wait_for_vblank_off - wait for vblank after disabling a pipe
+/*
+ * intel_wait_for_pipe_off - wait for pipe to turn off
  * @dev: drm device
  * @pipe: pipe to wait for
  *
@@ -1022,25 +1022,39 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
  * spinning on the vblank interrupt status bit, since we won't actually
  * see an interrupt when the pipe is disabled.
  *
- * So this function waits for the display line value to settle (it
- * usually ends up stopping at the start of the next frame).
+ * On Gen4 and above:
+ *   wait for the pipe register state bit to turn off
+ *
+ * Otherwise:
+ *   wait for the display line value to settle (it usually
+ *   ends up stopping at the start of the next frame).
+ *  
  */
-void intel_wait_for_vblank_off(struct drm_device *dev, int pipe)
+static void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 last_line;
 
-	/* Wait for the display line to settle */
-	do {
-		last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
-		mdelay(5);
-	} while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
-		 time_after(timeout, jiffies));
+	if (INTEL_INFO(dev)->gen >= 4) {
+		int pipeconf_reg = (pipe == 0 ? PIPEACONF : PIPEBCONF);
 
-	if (time_after(jiffies, timeout))
-		DRM_DEBUG_KMS("vblank wait timed out\n");
+		/* Wait for the Pipe State to go off */
+		if (wait_for((I915_READ(pipeconf_reg) & I965_PIPECONF_ACTIVE) == 0,
+			     100, 0))
+			DRM_DEBUG_KMS("pipe_off wait timed out\n");
+	} else {
+		u32 last_line;
+		int pipedsl_reg = (pipe == 0 ? PIPEADSL : PIPEBDSL);
+		unsigned long timeout = jiffies + msecs_to_jiffies(100);
+
+		/* Wait for the display line to settle */
+		do {
+			last_line = I915_READ(pipedsl_reg) & DSL_LINEMASK;
+			mdelay(5);
+		} while (((I915_READ(pipedsl_reg) & DSL_LINEMASK) != last_line) &&
+			 time_after(timeout, jiffies));
+		if (time_after(jiffies, timeout))
+			DRM_DEBUG_KMS("pipe_off wait timed out\n");
+	}
 }
 
 /* Parameters have changed, update FBC info */
@@ -2328,13 +2342,13 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(dspbase_reg);
 		}
 
-		/* Wait for vblank for the disable to take effect */
-		intel_wait_for_vblank_off(dev, pipe);
-
 		/* Don't disable pipe A or pipe A PLLs if needed */
 		if (pipeconf_reg == PIPEACONF &&
-		    (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		    (dev_priv->quirks & QUIRK_PIPEA_FORCE)) {
+			/* Wait for vblank for the disable to take effect */
+			intel_wait_for_vblank(dev, pipe);
 			goto skip_pipe_off;
+		}
 
 		/* Next, disable display pipes */
 		temp = I915_READ(pipeconf_reg);
@@ -2343,8 +2357,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 			I915_READ(pipeconf_reg);
 		}
 
-		/* Wait for vblank for the disable to take effect. */
-		intel_wait_for_vblank_off(dev, pipe);
+		/* Wait for the pipe to turn off */
+		intel_wait_for_pipe_off(dev, pipe);
 
 		temp = I915_READ(dpll_reg);
 		if ((temp & DPLL_VCO_ENABLE) != 0) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ad312ca6b3e5..8828b3ac6414 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -229,7 +229,6 @@ extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 						    struct drm_crtc *crtc);
 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
-extern void intel_wait_for_vblank_off(struct drm_device *dev, int pipe);
 extern void intel_wait_for_vblank(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
 extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_encoder *intel_encoder,

From cadb86570c41fe52a0ea741f1f9775e3412f0167 Mon Sep 17 00:00:00 2001
From: Giel van Schijndel <me@mortis.eu>
Date: Sun, 3 Oct 2010 08:09:49 -0400
Subject: [PATCH 685/728] hwmon: f71882fg: use a muxed resource lock for the
 Super I/O port

Sleep while acquiring a resource lock on the Super I/O port. This should
prevent collisions from causing the hardware probe to fail with -EBUSY.

Signed-off-by: Giel van Schijndel <me@mortis.eu>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
---
 drivers/hwmon/f71882fg.c | 32 +++++++++++++++++++-------------
 1 file changed, 19 insertions(+), 13 deletions(-)

diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 537841ef44b9..75afb3b0e076 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -111,7 +111,7 @@ static struct platform_device *f71882fg_pdev;
 /* Super-I/O Function prototypes */
 static inline int superio_inb(int base, int reg);
 static inline int superio_inw(int base, int reg);
-static inline void superio_enter(int base);
+static inline int superio_enter(int base);
 static inline void superio_select(int base, int ld);
 static inline void superio_exit(int base);
 
@@ -861,11 +861,20 @@ static int superio_inw(int base, int reg)
 	return val;
 }
 
-static inline void superio_enter(int base)
+static inline int superio_enter(int base)
 {
+	/* Don't step on other drivers' I/O space by accident */
+	if (!request_muxed_region(base, 2, DRVNAME)) {
+		printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
+				base);
+		return -EBUSY;
+	}
+
 	/* according to the datasheet the key must be send twice! */
 	outb(SIO_UNLOCK_KEY, base);
 	outb(SIO_UNLOCK_KEY, base);
+
+	return 0;
 }
 
 static inline void superio_select(int base, int ld)
@@ -877,6 +886,7 @@ static inline void superio_select(int base, int ld)
 static inline void superio_exit(int base)
 {
 	outb(SIO_LOCK_KEY, base);
+	release_region(base, 2);
 }
 
 static inline int fan_from_reg(u16 reg)
@@ -2175,21 +2185,15 @@ static int f71882fg_remove(struct platform_device *pdev)
 static int __init f71882fg_find(int sioaddr, unsigned short *address,
 	struct f71882fg_sio_data *sio_data)
 {
-	int err = -ENODEV;
 	u16 devid;
-
-	/* Don't step on other drivers' I/O space by accident */
-	if (!request_region(sioaddr, 2, DRVNAME)) {
-		printk(KERN_ERR DRVNAME ": I/O address 0x%04x already in use\n",
-				(int)sioaddr);
-		return -EBUSY;
-	}
-
-	superio_enter(sioaddr);
+	int err = superio_enter(sioaddr);
+	if (err)
+		return err;
 
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
 	if (devid != SIO_FINTEK_ID) {
 		pr_debug(DRVNAME ": Not a Fintek device\n");
+		err = -ENODEV;
 		goto exit;
 	}
 
@@ -2213,6 +2217,7 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 	default:
 		printk(KERN_INFO DRVNAME ": Unsupported Fintek device: %04x\n",
 		       (unsigned int)devid);
+		err = -ENODEV;
 		goto exit;
 	}
 
@@ -2223,12 +2228,14 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 
 	if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
 		printk(KERN_WARNING DRVNAME ": Device not activated\n");
+		err = -ENODEV;
 		goto exit;
 	}
 
 	*address = superio_inw(sioaddr, SIO_REG_ADDR);
 	if (*address == 0) {
 		printk(KERN_WARNING DRVNAME ": Base address not set\n");
+		err = -ENODEV;
 		goto exit;
 	}
 	*address &= ~(REGION_LENGTH - 1);	/* Ignore 3 LSB */
@@ -2239,7 +2246,6 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
 		(int)superio_inb(sioaddr, SIO_REG_DEVREV));
 exit:
 	superio_exit(sioaddr);
-	release_region(sioaddr, 2);
 	return err;
 }
 

From ce9d419dbecc292cc3e06e8b1d6d123d3fa813a4 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun, 26 Sep 2010 20:50:05 +0100
Subject: [PATCH 686/728] drm/i915: Sanity check pread/pwrite

Move the access control up from the fast paths, which are no longer
universally taken first, up into the caller. This then duplicates some
sanity checking along the slow paths, but is much simpler.
Tracked as CVE-2010-2962.

Reported-by: Kees Cook <kees@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_gem.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index cfe597865f5d..7749e78a7300 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -477,8 +477,15 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 	 */
 	if (args->offset > obj->size || args->size > obj->size ||
 	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference_unlocked(obj);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	if (i915_gem_object_needs_bit17_swizzle(obj)) {
@@ -490,8 +497,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 							file_priv);
 	}
 
+err:
 	drm_gem_object_unreference_unlocked(obj);
-
 	return ret;
 }
 
@@ -580,8 +587,6 @@ i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj,
 
 	user_data = (char __user *) (uintptr_t) args->data_ptr;
 	remain = args->size;
-	if (!access_ok(VERIFY_READ, user_data, remain))
-		return -EFAULT;
 
 
 	mutex_lock(&dev->struct_mutex);
@@ -940,8 +945,15 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 	 */
 	if (args->offset > obj->size || args->size > obj->size ||
 	    args->offset + args->size > obj->size) {
-		drm_gem_object_unreference_unlocked(obj);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto err;
+	}
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size)) {
+		ret = -EFAULT;
+		goto err;
 	}
 
 	/* We can only do the GTT pwrite on untiled buffers, as otherwise
@@ -975,8 +987,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		DRM_INFO("pwrite failed %d\n", ret);
 #endif
 
+err:
 	drm_gem_object_unreference_unlocked(obj);
-
 	return ret;
 }
 

From 7dcd2499deab8f10011713c40bc2f309c9b65077 Mon Sep 17 00:00:00 2001
From: Chris Wilson <chris@chris-wilson.co.uk>
Date: Sun, 26 Sep 2010 20:21:44 +0100
Subject: [PATCH 687/728] drm/i915: Rephrase pwrite bounds checking to avoid
 any potential overflow

... and do the same for pread.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
---
 drivers/gpu/drm/i915/i915_gem.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 7749e78a7300..aa959c4a1836 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -471,12 +471,8 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 		return -ENOENT;
 	obj_priv = to_intel_bo(obj);
 
-	/* Bounds check source.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
+	/* Bounds check source.  */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
 		ret = -EINVAL;
 		goto err;
 	}
@@ -939,12 +935,8 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 		return -ENOENT;
 	obj_priv = to_intel_bo(obj);
 
-	/* Bounds check destination.
-	 *
-	 * XXX: This could use review for overflow issues...
-	 */
-	if (args->offset > obj->size || args->size > obj->size ||
-	    args->offset + args->size > obj->size) {
+	/* Bounds check destination. */
+	if (args->offset > obj->size || args->size > obj->size - args->offset) {
 		ret = -EINVAL;
 		goto err;
 	}

From 0157443c56bcc50be4933ebdff3ece723dfd535c Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Thu, 30 Sep 2010 22:06:21 +0200
Subject: [PATCH 688/728] fuse: Initialize total_len in fuse_retrieve()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

fs/fuse/dev.c:1357: warning: ‘total_len’ may be used uninitialized in this
function

Initialize total_len to zero, else its value will be undefined.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
---
 fs/fuse/dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index d367af1514ef..cde755cca564 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1354,7 +1354,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode,
 	loff_t file_size;
 	unsigned int num;
 	unsigned int offset;
-	size_t total_len;
+	size_t total_len = 0;
 
 	req = fuse_get_req(fc);
 	if (IS_ERR(req))

From aaead25b954879e1a708ff2f3602f494c18d20b5 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Mon, 4 Oct 2010 14:25:33 +0200
Subject: [PATCH 689/728] writeback: always use sb->s_bdi for writeback
 purposes

We currently use struct backing_dev_info for various different purposes.
Originally it was introduced to describe a backing device which includes
an unplug and congestion function and various bits of readahead information
and VM-relevant flags.  We're also using for tracking dirty inodes for
writeback.

To make writeback properly find all inodes we need to only access the
per-filesystem backing_device pointed to by the superblock in ->s_bdi
inside the writeback code, and not the instances pointeded to by
inode->i_mapping->backing_dev which can be overriden by special devices
or might not be set at all by some filesystems.

Long term we should split out the writeback-relevant bits of struct
backing_device_info (which includes more than the current bdi_writeback)
and only point to it from the superblock while leaving the traditional
backing device as a separate structure that can be overriden by devices.

The one exception for now is the block device filesystem which really
wants different writeback contexts for it's different (internal) inodes
to handle the writeout more efficiently.  For now we do this with
a hack in fs-writeback.c because we're so late in the cycle, but in
the future I plan to replace this with a superblock method that allows
for multiple writeback contexts per filesystem.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
---
 fs/fs-writeback.c | 19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 5581122bd2c0..ab38fef1c9a1 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -72,22 +72,11 @@ int writeback_in_progress(struct backing_dev_info *bdi)
 static inline struct backing_dev_info *inode_to_bdi(struct inode *inode)
 {
 	struct super_block *sb = inode->i_sb;
-	struct backing_dev_info *bdi = inode->i_mapping->backing_dev_info;
 
-	/*
-	 * For inodes on standard filesystems, we use superblock's bdi. For
-	 * inodes on virtual filesystems, we want to use inode mapping's bdi
-	 * because they can possibly point to something useful (think about
-	 * block_dev filesystem).
-	 */
-	if (sb->s_bdi && sb->s_bdi != &noop_backing_dev_info) {
-		/* Some device inodes could play dirty tricks. Catch them... */
-		WARN(bdi != sb->s_bdi && bdi_cap_writeback_dirty(bdi),
-			"Dirtiable inode bdi %s != sb bdi %s\n",
-			bdi->name, sb->s_bdi->name);
-		return sb->s_bdi;
-	}
-	return bdi;
+	if (strcmp(sb->s_type->name, "bdev") == 0)
+		return inode->i_mapping->backing_dev_info;
+
+	return sb->s_bdi;
 }
 
 static void bdi_queue_work(struct backing_dev_info *bdi,

From 39cfae64dfd243fa7a7ca73643591bdebc1cf1e9 Mon Sep 17 00:00:00 2001
From: Kusanagi Kouichi <slash@ac.auone-net.jp>
Date: Sun, 26 Sep 2010 14:17:42 -0300
Subject: [PATCH 690/728] perf tools: Fix build breakage

The patch ecafda6 introduced a problem where all object files would be
always rebuilt, fix it by using:

http://www.gnu.org/software/make/manual/html_node/Prerequisite-Types.html

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Bernd Petrovitsch <bernd@sysprog.at>
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 4f1fa77c1feb..1950e19af1cf 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -1017,7 +1017,7 @@ builtin-revert.o wt-status.o: wt-status.h
 # we compile into subdirectories. if the target directory is not the source directory, they might not exists. So
 # we depend the various files onto their directories.
 DIRECTORY_DEPS = $(LIB_OBJS) $(BUILTIN_OBJS) $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)common-cmds.h
-$(DIRECTORY_DEPS): $(sort $(dir $(DIRECTORY_DEPS)))
+$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
 # In the second step, we make a rule to actually create these directories
 $(sort $(dir $(DIRECTORY_DEPS))):
 	$(QUIET_MKDIR)$(MKDIR) -p $@ 2>/dev/null

From c569d3326bca6774f6c23f1dc91acad5400b6409 Mon Sep 17 00:00:00 2001
From: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Date: Thu, 23 Sep 2010 22:19:01 +0200
Subject: [PATCH 691/728] perf ui hist browser: Fix segfault on 'a' for
 annotate

There a typo in util/ui/browsers/hists.c that leads to a segfault when you
press the 'a' key on a non-resolved symbol (plain hex address).

LKML-Reference: <20100923201901.GE31726@gambetta>
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/ui/browsers/hists.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/ui/browsers/hists.c b/tools/perf/util/ui/browsers/hists.c
index dafdf6775d77..6866aa4c41e0 100644
--- a/tools/perf/util/ui/browsers/hists.c
+++ b/tools/perf/util/ui/browsers/hists.c
@@ -773,7 +773,7 @@ int hists__browse(struct hists *self, const char *helpline, const char *ev_name)
 
 			switch (key) {
 			case 'a':
-				if (browser->selection->map == NULL &&
+				if (browser->selection->map == NULL ||
 				    browser->selection->map->dso->annotate_warned)
 					continue;
 				goto do_annotate;

From 0f940cb7d970f4fd569bb5f9f49774422f2ccbee Mon Sep 17 00:00:00 2001
From: Stephane Eranian <eranian@google.com>
Date: Tue, 21 Sep 2010 00:45:01 +0200
Subject: [PATCH 692/728] perf trace scripting: Fix extern struct definitions

Both python_scripting_ops and perl_scripting_ops have two global definitions.
One in trace-event-scripting.c and one in their respective scripting-engine
modules.

The issue is that depending on the linker order one definition or the other
is chosen. One is uninitialized (bss), while the other is initialized. If
the uninitialized version is chosen, then perf does not function properly.

This patch fixes this by adding the extern prefix to the definitions in
trace-event-scripting.c.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
LKML-Reference: <4c97e41a.078fd80a.7a8b.3cc9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/util/trace-event-scripting.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/util/trace-event-scripting.c b/tools/perf/util/trace-event-scripting.c
index 7ea983acfaea..f7af2fca965d 100644
--- a/tools/perf/util/trace-event-scripting.c
+++ b/tools/perf/util/trace-event-scripting.c
@@ -97,7 +97,7 @@ void setup_python_scripting(void)
 	register_python_scripting(&python_scripting_unsupported_ops);
 }
 #else
-struct scripting_ops python_scripting_ops;
+extern struct scripting_ops python_scripting_ops;
 
 void setup_python_scripting(void)
 {
@@ -158,7 +158,7 @@ void setup_perl_scripting(void)
 	register_perl_scripting(&perl_scripting_unsupported_ops);
 }
 #else
-struct scripting_ops perl_scripting_ops;
+extern struct scripting_ops perl_scripting_ops;
 
 void setup_perl_scripting(void)
 {

From eefc3f329d93404bfe1285d5b2f4380fede42e89 Mon Sep 17 00:00:00 2001
From: Andrea Gelmini <andrea.gelmini@gelma.net>
Date: Thu, 5 Aug 2010 15:51:25 +0200
Subject: [PATCH 693/728] MIPS: Fix a typo.

"Userpace" -> "Userspace"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1536/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/kgdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 1f4e2fa64140..f4546e97c60d 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -283,7 +283,7 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
 	struct pt_regs *regs = args->regs;
 	int trap = (regs->cp0_cause & 0x7c) >> 2;
 
-	/* Userpace events, ignore. */
+	/* Userspace events, ignore. */
 	if (user_mode(regs))
 		return NOTIFY_DONE;
 

From 26deda5ceedbe28df4beb3b98e3fbce281b53a07 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Thu, 5 Aug 2010 22:17:22 +0200
Subject: [PATCH 694/728] MIPS: kspd: Adjust confusing if indentation

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
To: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/kspd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index 80e2ba694bab..29811f043399 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -251,7 +251,7 @@ void sp_work_handle_request(void)
  		memset(&tz, 0, sizeof(tz));
  		if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
 					     (int)&tz, 0, 0)) == 0)
-		ret.retval = tv.tv_sec;
+			ret.retval = tv.tv_sec;
 		break;
 
  	case MTSP_SYSCALL_EXIT:

From 543001f8d8a878c3babe4525cb16d83d25c16762 Mon Sep 17 00:00:00 2001
From: Ricardo Mendoza <ricmm@gentoo.org>
Date: Fri, 6 Aug 2010 11:12:57 -0430
Subject: [PATCH 695/728] MIPS: RM7000: Symbol should be static

Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1540/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/sc-rm7k.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 1ef75cd80a0d..274af3be1442 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -30,7 +30,7 @@
 #define tc_lsize	32
 
 extern unsigned long icache_way_size, dcache_way_size;
-unsigned long tcache_size;
+static unsigned long tcache_size;
 
 #include <asm/r4kcache.h>
 

From 2b78920d19870561a8b7503b8e869a6da5f07d3f Mon Sep 17 00:00:00 2001
From: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Date: Wed, 9 Jun 2010 12:35:25 +0800
Subject: [PATCH 696/728] MIPS: Use generic atomic64 for 32-bit kernels

The 64-bit kernel has already had its atomic64 functions. Except for that,
we use the generic spinlocked version. The atomic64 types and related
functions are needed for the Linux performance counter subsystem.

Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Patchwork: https://patchwork.linux-mips.org/patch/1361/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig              | 1 +
 arch/mips/include/asm/atomic.h | 4 ++++
 2 files changed, 5 insertions(+)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3ad59dde4852..ec410009e8f0 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -13,6 +13,7 @@ config MIPS
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select RTC_LIB if !MACH_LOONGSON
+	select GENERIC_ATOMIC64 if !64BIT
 
 mainmenu "Linux/MIPS Kernel Configuration"
 
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index c63c56bfd184..47d87da379f9 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -782,6 +782,10 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
  */
 #define atomic64_add_negative(i, v) (atomic64_add_return(i, (v)) < 0)
 
+#else /* !CONFIG_64BIT */
+
+#include <asm-generic/atomic64.h>
+
 #endif /* CONFIG_64BIT */
 
 /*

From 1ec0e739766b29c9d93d8a4cff68b1cb2e962cde Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= <biessmann@corscience.de>
Date: Wed, 11 Aug 2010 18:49:53 +0200
Subject: [PATCH 697/728] MIPS: Octeon: Determine if helper needs to be built
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch adds an config switch to determine if we need to build some
workaround helper files.

The staging driver octeon-ethernet references some symbols which are only
built when PCI is enabled. The new config switch enables these symbols in
bothe cases.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
To: linux-kernel@vger.kernel.org
Cc: Andreas Bießmann <biessmann@corscience.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1543/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/Kconfig            | 4 ++++
 arch/mips/cavium-octeon/executive/Makefile | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index 094c17e38e16..47323ca452dc 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -83,3 +83,7 @@ config ARCH_SPARSEMEM_ENABLE
 	def_bool y
 	select SPARSEMEM_STATIC
 	depends on CPU_CAVIUM_OCTEON
+
+config CAVIUM_OCTEON_HELPER
+	def_bool y
+	depends on OCTEON_ETHERNET || PCI
diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile
index 2fd66db6939e..7f41c5be2190 100644
--- a/arch/mips/cavium-octeon/executive/Makefile
+++ b/arch/mips/cavium-octeon/executive/Makefile
@@ -11,4 +11,4 @@
 
 obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
 
-obj-$(CONFIG_PCI) += cvmx-helper-errata.o cvmx-helper-jtag.o
+obj-$(CONFIG_CAVIUM_OCTEON_HELPER) += cvmx-helper-errata.o cvmx-helper-jtag.o

From 5707bf6bcecd85d01ea22e8b28cf66170068475f Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 17 Aug 2010 16:01:59 +0100
Subject: [PATCH 698/728] MIPS: Document why RELOC_HIDE is there.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/page.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index a16beafcea91..e59cd1ac09c2 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -150,6 +150,20 @@ typedef struct { unsigned long pgprot; } pgprot_t;
     ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
 #endif
 #define __va(x)		((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+
+/*
+ * RELOC_HIDE was originally added by 6007b903dfe5f1d13e0c711ac2894bdd4a61b1ad
+ * (lmo) rsp. 8431fd094d625b94d364fe393076ccef88e6ce18 (kernel.org).  The
+ * discussion can be found in lkml posting
+ * <a2ebde260608230500o3407b108hc03debb9da6e62c@mail.gmail.com> which is
+ * archived at http://lists.linuxcoding.com/kernel/2006-q3/msg17360.html
+ *
+ * It is unclear if the misscompilations mentioned in
+ * http://lkml.org/lkml/2010/8/8/138 also affect MIPS so we keep this one
+ * until GCC 3.x has been retired before we can apply
+ * https://patchwork.linux-mips.org/patch/1541/
+ */
+
 #define __pa_symbol(x)	__pa(RELOC_HIDE((unsigned long)(x), 0))
 
 #define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)

From 244599469f4c5860c8a4ae8fa8c6907a10caeccf Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 2 Sep 2010 22:59:58 +0200
Subject: [PATCH 699/728] MIPS: Audit: Fix hang in entry.S.

_TIF_WORK_MASK false had _TIF_SYSCALL_AUDIT set.  If a thread's
_TIF_SYSCALL_AUDIT is ever set this will lead to an endless loop on the
way out from a syscall.

Currently this is only a theoretic bug as init/Kconfig doesn't allow
AUDIT_SYSCALL to be enabled for MIPS.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/thread_info.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 2376f2e06e47..70df9c0d3c5b 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -146,7 +146,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
 
 /* work to do on interrupt/exception return */
-#define _TIF_WORK_MASK		(0x0000ffef & ~_TIF_SECCOMP)
+#define _TIF_WORK_MASK		(0x0000ffef &				\
+					~(_TIF_SECCOMP | _TIF_SYSCALL_AUDIT))
 /* work to do on any return to u-space */
 #define _TIF_ALLWORK_MASK	(0x8000ffff & ~_TIF_SECCOMP)
 

From a2e715a86c6dc85fb4a13c0c818637131de44cd2 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 2 Sep 2010 23:22:23 +0200
Subject: [PATCH 700/728] MIPS: DMA: Fix computation of DMA flags from device's
 coherent_dma_mask.

This only matters for ISA devices with a 24-bit DMA limit or for devices
with a 32-bit DMA limit on systems with ZONE_DMA32 enabled.  The latter
currently only affects 32-bit PCI cards on Sibyte-based systems with more
than 1GB RAM installed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/dma-default.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 7ba890860d98..469d4019f795 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -44,27 +44,39 @@ static inline int cpu_is_noncoherent_r10000(struct device *dev)
 
 static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
 {
+	gfp_t dma_flag;
+
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
 
-#ifdef CONFIG_ZONE_DMA
+#ifdef CONFIG_ISA
 	if (dev == NULL)
-		gfp |= __GFP_DMA;
-	else if (dev->coherent_dma_mask < DMA_BIT_MASK(24))
-		gfp |= __GFP_DMA;
+		dma_flag = __GFP_DMA;
 	else
 #endif
-#ifdef CONFIG_ZONE_DMA32
+#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
 	     if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
-		gfp |= __GFP_DMA32;
+			dma_flag = __GFP_DMA;
+	else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+			dma_flag = __GFP_DMA32;
 	else
 #endif
-		;
+#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
+	     if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+		dma_flag = __GFP_DMA32;
+	else
+#endif
+#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
+	     if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
+		dma_flag = __GFP_DMA;
+	else
+#endif
+		dma_flag = 0;
 
 	/* Don't invoke OOM killer */
 	gfp |= __GFP_NORETRY;
 
-	return gfp;
+	return gfp | dma_flag;
 }
 
 void *dma_alloc_noncoherent(struct device *dev, size_t size,

From 25f12b339caea6b3ca750871d8cecbda70fd83c6 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 16 Sep 2010 11:40:41 +0100
Subject: [PATCH 701/728] MIPS: Kconfig: Fix and clarify kconfig help text for
 VSMP and SMTC.

Only VSMP was known as SMVP and generally the help text was too short to
be helpful.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ec410009e8f0..5526faabfc21 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1647,8 +1647,16 @@ config MIPS_MT_SMP
 	select SYS_SUPPORTS_SMP
 	select SMP_UP
 	help
-	  This is a kernel model which is also known a VSMP or lately
-	  has been marketesed into SMVP.
+	  This is a kernel model which is known a VSMP but lately has been
+	  marketesed into SMVP.
+	  Virtual SMP uses the processor's VPEs  to implement virtual
+	  processors. In currently available configuration of the 34K processor
+	  this allows for a dual processor. Both processors will share the same
+	  primary caches; each will obtain the half of the TLB for it's own
+	  exclusive use. For a layman this model can be described as similar to
+	  what Intel calls Hyperthreading.
+
+	  For further information see http://www.linux-mips.org/wiki/34K#VSMP
 
 config MIPS_MT_SMTC
 	bool "SMTC: Use all TCs on all VPEs for SMP"
@@ -1665,6 +1673,14 @@ config MIPS_MT_SMTC
 	help
 	  This is a kernel model which is known a SMTC or lately has been
 	  marketesed into SMVP.
+	  is presenting the available TC's of the core as processors to Linux.
+	  On currently available 34K processors this means a Linux system will
+	  see up to 5 processors. The implementation of the SMTC kernel differs
+	  significantly from VSMP and cannot efficiently coexist in the same
+	  kernel binary so the choice between VSMP and SMTC is a compile time
+	  decision.
+
+	  For further information see http://www.linux-mips.org/wiki/34K#SMTC
 
 endchoice
 

From 863cb9bad8f992a9c171e90552045eac77808e84 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Fri, 17 Sep 2010 17:07:48 +0100
Subject: [PATCH 702/728] MIPS: GIC: Remove dependencies from Malta files.

This prevents the GIC code from being reusable sanely.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/gic.h                  | 1 +
 arch/mips/include/asm/mips-boards/maltaint.h | 3 ---
 arch/mips/kernel/irq-gic.c                   | 3 +--
 arch/mips/mti-malta/malta-int.c              | 3 +++
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
index 9b9436a4d816..86548da650e7 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -321,6 +321,7 @@ struct gic_intrmask_regs {
  */
 struct gic_intr_map {
 	unsigned int cpunum;	/* Directed to this CPU */
+#define GIC_UNUSED		0xdead			/* Dummy data */
 	unsigned int pin;	/* Directed to this Pin */
 	unsigned int polarity;	/* Polarity : +/-	*/
 	unsigned int trigtype;	/* Trigger  : Edge/Levl */
diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h
index cea872fc6f5c..d11aa02a956a 100644
--- a/arch/mips/include/asm/mips-boards/maltaint.h
+++ b/arch/mips/include/asm/mips-boards/maltaint.h
@@ -88,9 +88,6 @@
 
 #define GIC_EXT_INTR(x)		x
 
-/* Dummy data */
-#define X			0xdead
-
 /* External Interrupts used for IPI */
 #define GIC_IPI_EXT_INTR_RESCHED_VPE0	16
 #define GIC_IPI_EXT_INTR_CALLFNC_VPE0	17
diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index b181f2f0ea8e..3e57e290dbb0 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -7,7 +7,6 @@
 #include <asm/io.h>
 #include <asm/gic.h>
 #include <asm/gcmpregs.h>
-#include <asm/mips-boards/maltaint.h>
 #include <asm/irq.h>
 #include <linux/hardirq.h>
 #include <asm-generic/bitops/find.h>
@@ -222,7 +221,7 @@ static void __init gic_basic_init(int numintrs, int numvpes,
 	/* Setup specifics */
 	for (i = 0; i < mapsize; i++) {
 		cpu = intrmap[i].cpunum;
-		if (cpu == X)
+		if (cpu == GIC_UNUSED)
 			continue;
 		if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
 			continue;
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
index 15949b0be811..b79b24afe3a2 100644
--- a/arch/mips/mti-malta/malta-int.c
+++ b/arch/mips/mti-malta/malta-int.c
@@ -385,6 +385,8 @@ static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
  */
 
 #define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
+#define X GIC_UNUSED
+
 static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ X, X,		   X,		X,		0 },
 	{ X, X,		   X,	 	X,		0 },
@@ -404,6 +406,7 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
 	{ X, X,		   X,		X,	        0 },
 	/* The remainder of this table is initialised by fill_ipi_map */
 };
+#undef X
 
 /*
  * GCMP needs to be detected before any SMP initialisation

From c1b47e9508f74c152407323260f9fbb980d2fde1 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 19 Sep 2010 00:09:09 +0100
Subject: [PATCH 703/728] MIPS: PNX8550: Sort out machine halt, restart and
 powerdown functions.

No rubbish printks - those belong to userspace.  The halt function now
actually halts the system and the poweroff function was deleted because
it didn't actually power down the system.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pnx8550/common/reset.c | 20 +++++---------------
 arch/mips/pnx8550/common/setup.c |  3 +--
 2 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/mips/pnx8550/common/reset.c b/arch/mips/pnx8550/common/reset.c
index fadd8744a6bc..e7a12ff304b9 100644
--- a/arch/mips/pnx8550/common/reset.c
+++ b/arch/mips/pnx8550/common/reset.c
@@ -22,29 +22,19 @@
  */
 #include <linux/kernel.h>
 
+#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <glb.h>
 
 void pnx8550_machine_restart(char *command)
 {
-	char head[] = "************* Machine restart *************";
-	char foot[] = "*******************************************";
-
-	printk("\n\n");
-	printk("%s\n", head);
-	if (command != NULL)
-		printk("* %s\n", command);
-	printk("%s\n", foot);
-
 	PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST;
 }
 
 void pnx8550_machine_halt(void)
 {
-	printk("*** Machine halt. (Not implemented) ***\n");
-}
-
-void pnx8550_machine_power_off(void)
-{
-	printk("*** Machine power off.  (Not implemented) ***\n");
+	while (1) {
+		if (cpu_wait)
+			cpu_wait();
+	}
 }
diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c
index 64246c9c875c..43cb3945fdbf 100644
--- a/arch/mips/pnx8550/common/setup.c
+++ b/arch/mips/pnx8550/common/setup.c
@@ -44,7 +44,6 @@
 extern void __init board_setup(void);
 extern void pnx8550_machine_restart(char *);
 extern void pnx8550_machine_halt(void);
-extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
 extern char *prom_getcmdline(void);
@@ -100,7 +99,7 @@ void __init plat_mem_setup(void)
 
         _machine_restart = pnx8550_machine_restart;
         _machine_halt = pnx8550_machine_halt;
-        pm_power_off = pnx8550_machine_power_off;
+        pm_power_off = pnx8550_machine_halt;
 
 	/* Clear the Global 2 Register, PCI Inta Output Enable Registers
 	   Bit 1:Enable DAC Powerdown

From 7dde29cb1dc4e3e9c4c3746332b5f61695cd59da Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Sat, 11 Sep 2010 22:10:52 -0700
Subject: [PATCH 704/728] MIPS: Remove pr_<level> uses of KERN_<level>

These would result in KERN_<level> actually getting printed.

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1581/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/irq-gic.c  | 2 +-
 arch/mips/pci/pci-rc32434.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c
index 3e57e290dbb0..82ba9f62f49e 100644
--- a/arch/mips/kernel/irq-gic.c
+++ b/arch/mips/kernel/irq-gic.c
@@ -130,7 +130,7 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	int		i;
 
 	irq -= _irqbase;
-	pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
+	pr_debug("%s(%d) called\n", __func__, irq);
 	cpumask_and(&tmp, cpumask, cpu_online_mask);
 	if (cpus_empty(tmp))
 		return -1;
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
index 71f7d27b0d4c..f31218e17d3c 100644
--- a/arch/mips/pci/pci-rc32434.c
+++ b/arch/mips/pci/pci-rc32434.c
@@ -118,7 +118,7 @@ static int __init rc32434_pcibridge_init(void)
 	if (!((pcicvalue == PCIM_H_EA) ||
 	      (pcicvalue == PCIM_H_IA_FIX) ||
 	      (pcicvalue == PCIM_H_IA_RR))) {
-		pr_err(KERN_ERR "PCI init error!!!\n");
+		pr_err("PCI init error!!!\n");
 		/* Not in Host Mode, return ERROR */
 		return -1;
 	}

From e9fb4d84d69403d1e004422086c559b31b3f8136 Mon Sep 17 00:00:00 2001
From: Bernhard Walle <walle@corscience.de>
Date: Fri, 3 Sep 2010 10:15:34 +0200
Subject: [PATCH 705/728] MIPS: N32: Fix getdents64 syscall for n32

Commit 31c984a5acabea5d8c7224dc226453022be46f33 introduced a new syscall
getdents64. However, in the syscall table, the new syscall still refers to
the old getdents which doesn't work.

The problem appeared with a system that uses the eglibc 2.12-r11187 (that
utilizes that new syscall) is very confused. The fix has been tested with
that eglibc version.

Signed-off-by: Bernhard Walle <walle@corscience.de>
To: linux-mips@linux-mips.org
Cc: ddaney@caviumnetworks.com
Cc: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1567/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/scall64-n32.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index a3d66137731a..dfa8cbcdc5aa 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -419,5 +419,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
-	PTR     sys_getdents
+	PTR     sys_getdents64
 	.size	sysn32_call_table,.-sysn32_call_table

From c9c4d98b47f9e0cec995b8bdd77616e4e1c12d98 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 14 Aug 2010 16:02:37 +0900
Subject: [PATCH 706/728] MIPS: TX49xx: Rename ARCH_KMALLOC_MINALIGN to
 ARCH_DMA_MINALIGN

Architectures need to set ARCH_DMA_MINALIGN to the minimum DMA
alignment (commit a6eb9fe105d5de0053b261148cee56c94b4720ca). Defining
ARCH_KMALLOC_MINALIGN doesn't work anymore.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: anemo@mba.ocn.ne.jp
Patchwork: https://patchwork.linux-mips.org/patch/1544/
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mach-tx49xx/kmalloc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/mach-tx49xx/kmalloc.h b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
index b74caf65482b..ff9a8b86cb93 100644
--- a/arch/mips/include/asm/mach-tx49xx/kmalloc.h
+++ b/arch/mips/include/asm/mach-tx49xx/kmalloc.h
@@ -1,6 +1,6 @@
 #ifndef __ASM_MACH_TX49XX_KMALLOC_H
 #define __ASM_MACH_TX49XX_KMALLOC_H
 
-#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
 
 #endif /* __ASM_MACH_TX49XX_KMALLOC_H */

From 5e844b31c2ace282ab8bea630b63e0212d9532d4 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Mon, 23 Aug 2010 14:10:37 -0700
Subject: [PATCH 707/728] MIPS: Hookup fanotify_init, fanotify_mark, and
 prlimit64 syscalls.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1553/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/unistd.h | 21 +++++++++++++++------
 arch/mips/kernel/linux32.c     |  7 +++++++
 arch/mips/kernel/scall32-o32.S |  5 ++++-
 arch/mips/kernel/scall64-64.S  |  5 ++++-
 arch/mips/kernel/scall64-n32.S |  3 +++
 arch/mips/kernel/scall64-o32.S |  5 ++++-
 6 files changed, 37 insertions(+), 9 deletions(-)

diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h
index baa318a59c97..550725b881d5 100644
--- a/arch/mips/include/asm/unistd.h
+++ b/arch/mips/include/asm/unistd.h
@@ -356,16 +356,19 @@
 #define __NR_perf_event_open		(__NR_Linux + 333)
 #define __NR_accept4			(__NR_Linux + 334)
 #define __NR_recvmmsg			(__NR_Linux + 335)
+#define __NR_fanotify_init		(__NR_Linux + 336)
+#define __NR_fanotify_mark		(__NR_Linux + 337)
+#define __NR_prlimit64			(__NR_Linux + 338)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		335
+#define __NR_Linux_syscalls		338
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		335
+#define __NR_O32_Linux_syscalls		338
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -668,16 +671,19 @@
 #define __NR_perf_event_open		(__NR_Linux + 292)
 #define __NR_accept4			(__NR_Linux + 293)
 #define __NR_recvmmsg			(__NR_Linux + 294)
+#define __NR_fanotify_init		(__NR_Linux + 295)
+#define __NR_fanotify_mark		(__NR_Linux + 296)
+#define __NR_prlimit64			(__NR_Linux + 297)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		294
+#define __NR_Linux_syscalls		297
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		294
+#define __NR_64_Linux_syscalls		297
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -985,16 +991,19 @@
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
 #define __NR_getdents64			(__NR_Linux + 299)
+#define __NR_fanotify_init		(__NR_Linux + 300)
+#define __NR_fanotify_mark		(__NR_Linux + 301)
+#define __NR_prlimit64			(__NR_Linux + 302)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		299
+#define __NR_Linux_syscalls		302
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		299
+#define __NR_N32_Linux_syscalls		302
 
 #ifdef __KERNEL__
 
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index c2dab140dc98..6343b4a5b835 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -341,3 +341,10 @@ asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf,
 {
 	return sys_lookup_dcookie(merge_64(a0, a1), buf, len);
 }
+
+SYSCALL_DEFINE6(32_fanotify_mark, int, fanotify_fd, unsigned int, flags,
+		u64, a3, u64, a4, int, dfd, const char  __user *, pathname)
+{
+	return sys_fanotify_mark(fanotify_fd, flags, merge_64(a3, a4),
+				 dfd, pathname);
+}
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 17202bbe843f..584415eef8c9 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -583,7 +583,10 @@ einval:	li	v0, -ENOSYS
 	sys	sys_rt_tgsigqueueinfo	4
 	sys	sys_perf_event_open	5
 	sys	sys_accept4		4
-	sys     sys_recvmmsg            5
+	sys	sys_recvmmsg		5	/* 4335 */
+	sys	sys_fanotify_init	2
+	sys	sys_fanotify_mark	6
+	sys	sys_prlimit64		4
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index a8a6c596eb04..f02aeeb363ba 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -420,5 +420,8 @@ sys_call_table:
 	PTR	sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
-	PTR     sys_recvmmsg
+	PTR	sys_recvmmsg
+	PTR	sys_fanotify_init		/* 5395 */
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index dfa8cbcdc5aa..1e38ec97672e 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -420,4 +420,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
 	PTR     sys_getdents64
+	PTR	sys_fanotify_init		/* 6300 */
+	PTR	sys_fanotify_mark
+	PTR	sys_prlimit64
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 813689ef2384..171979fc98e5 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -538,5 +538,8 @@ sys_call_table:
 	PTR	compat_sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
-	PTR     compat_sys_recvmmsg
+	PTR	compat_sys_recvmmsg		/* 4335 */
+	PTR	sys_fanotify_init
+	PTR	sys_32_fanotify_mark
+	PTR	sys_prlimit64
 	.size	sys_call_table,.-sys_call_table

From e080e6166a4c365f98a346e8433c81d0dca42f52 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Mon, 20 Sep 2010 15:00:19 +0100
Subject: [PATCH 708/728] MIPS: Fix syscall 64 bit number comments.

Noticed and original patch by Philby John <pjohn@mvista.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/scall64-64.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index f02aeeb363ba..5573f8e4e326 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -416,12 +416,12 @@ sys_call_table:
 	PTR	sys_pipe2
 	PTR	sys_inotify_init1
 	PTR	sys_preadv
-	PTR	sys_pwritev			/* 5390 */
+	PTR	sys_pwritev			/* 5290 */
 	PTR	sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR	sys_recvmmsg
-	PTR	sys_fanotify_init		/* 5395 */
+	PTR	sys_fanotify_init		/* 5295 */
 	PTR	sys_fanotify_mark
 	PTR	sys_prlimit64
 	.size	sys_call_table,.-sys_call_table

From 2b877a3ff41b6d7e3ade0739ac840fb6c89f3b1f Mon Sep 17 00:00:00 2001
From: Manuel Lauss <manuel.lauss@googlemail.com>
Date: Thu, 19 Aug 2010 13:37:13 +0200
Subject: [PATCH 709/728] MIPS: Alchemy: Resolve prom section mismatches

The function prom_init_cmdline() references the variable __initdata
arcs_cmdline.

The function prom_get_ethernet_addr() references the variable __initdata
arcs_cmdline.

Annotate prom_init_cmdline() as __init, unexport and annotate
prom_get_ethernet_addr() since it's no longer called from within
driver code.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1547/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/prom.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c
index c29511b11d44..534021059629 100644
--- a/arch/mips/alchemy/common/prom.c
+++ b/arch/mips/alchemy/common/prom.c
@@ -43,7 +43,7 @@ int prom_argc;
 char **prom_argv;
 char **prom_envp;
 
-void prom_init_cmdline(void)
+void __init prom_init_cmdline(void)
 {
 	int i;
 
@@ -104,7 +104,7 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str)
 	}
 }
 
-int prom_get_ethernet_addr(char *ethernet_addr)
+int __init prom_get_ethernet_addr(char *ethernet_addr)
 {
 	char *ethaddr_str;
 
@@ -123,7 +123,6 @@ int prom_get_ethernet_addr(char *ethernet_addr)
 
 	return 0;
 }
-EXPORT_SYMBOL(prom_get_ethernet_addr);
 
 void __init prom_free_prom_memory(void)
 {

From 2ccc5b150fb771bcbbb27a19a00e176e10b7f11e Mon Sep 17 00:00:00 2001
From: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Date: Tue, 31 Aug 2010 13:24:19 +0300
Subject: [PATCH 710/728] MIPS: Calculate VMLINUZ_LOAD_ADDRESS based on the
 length of vmlinux.bin

Fix VMLINUZ_LOAD_ADDRESS calculation to be based on the length of
vmlinux.bin, the actual uncompressed kernel binary.

Previously it was based on the length of KBUILD_IMAGE (the unstripped ELF
vmlinux), which is bigger than vmlinux.bin.  As a result, vmlinuz was
loaded into a memory address higher then actually needed - a problem for
small memory platforms.

Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
To: linux-mips@linux-mips.org
Cc: alex@digriz.org.uk
Cc: manuel.lauss@googlemail.com
Cc: sam@ravnborg.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1564/
Acked-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/boot/compressed/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index ed9bb709c9a3..5fd7f7a58b7e 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -59,7 +59,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 hostprogs-y := calc_vmlinuz_load_addr
 
 VMLINUZ_LOAD_ADDRESS = $(shell $(obj)/calc_vmlinuz_load_addr \
-		$(objtree)/$(KBUILD_IMAGE) $(VMLINUX_LOAD_ADDRESS))
+		$(obj)/vmlinux.bin $(VMLINUX_LOAD_ADDRESS))
 
 vmlinuzobjs-y += $(obj)/piggy.o
 

From 4c7106c48a061e26f646391cfe8ba7cbd28516b6 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 23 Sep 2010 11:23:29 -0700
Subject: [PATCH 711/728] MIPS: Don't place cu2 notifiers in __cpuinitdata

The notifiers may be called at any time, so the notifier_block cannot
be in init memory.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1592/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/cop2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/cop2.h b/arch/mips/include/asm/cop2.h
index 2cb2f0c2c4f8..3532e2c5f098 100644
--- a/arch/mips/include/asm/cop2.h
+++ b/arch/mips/include/asm/cop2.h
@@ -24,7 +24,7 @@ extern int cu2_notifier_call_chain(unsigned long val, void *v);
 
 #define cu2_notifier(fn, pri)						\
 ({									\
-	static struct notifier_block fn##_nb __cpuinitdata = {		\
+	static struct notifier_block fn##_nb = {			\
 		.notifier_call = fn,					\
 		.priority = pri						\
 	};								\

From 158d6742bced08c87fd46b5905eebc0d41e3cdf6 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 23 Sep 2010 11:24:09 -0700
Subject: [PATCH 712/728] MIPS: Octeon: Place cnmips_cu2_setup in __init
 memory.

It is an early_initcall, so it should be in __init memory.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1593/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/cavium-octeon/cpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c
index c664c8cc2b42..a5b427909b5c 100644
--- a/arch/mips/cavium-octeon/cpu.c
+++ b/arch/mips/cavium-octeon/cpu.c
@@ -41,7 +41,7 @@ static int cnmips_cu2_call(struct notifier_block *nfb, unsigned long action,
 	return NOTIFY_OK;		/* Let default notifier send signals */
 }
 
-static int cnmips_cu2_setup(void)
+static int __init cnmips_cu2_setup(void)
 {
 	return cu2_notifier(cnmips_cu2_call, 0);
 }

From 4829b906cc063cb7cd1b7f34fa05de6db75ec8bb Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Sat, 2 Oct 2010 17:46:06 -0700
Subject: [PATCH 713/728] ksm: fix page_address_in_vma anon_vma oops

2.6.36-rc1 commit 21d0d443cdc1658a8c1484fdcece4803f0f96d0e "rmap:
resurrect page_address_in_vma anon_vma check" was right to resurrect
that check; but now that it's comparing anon_vma->roots instead of
just anon_vmas, there's a danger of oopsing on a NULL anon_vma.

In most cases no NULL anon_vma ever gets here; but it turns out that
occasionally KSM, when enabled on a forked or forking process, will
itself call page_address_in_vma() on a "half-KSM" page left over from
an earlier failed attempt to merge - whose page_anon_vma() is NULL.

It's my bug that those should be getting here at all: I thought they
were already dealt with, this oops proves me wrong, I'll fix it in
the next release - such pages are effectively pinned until their
process exits, since rmap cannot find their ptes (though swapoff can).

For now just work around it by making page_address_in_vma() safe (and
add a comment on why that check is wanted anyway).  A similar check
in __page_check_anon_rmap() is safe because do_page_add_anon_rmap()
already excluded KSM pages.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/rmap.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/mm/rmap.c b/mm/rmap.c
index 9d2ba01bd4f9..92e6757f196e 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -381,7 +381,13 @@ vma_address(struct page *page, struct vm_area_struct *vma)
 unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 {
 	if (PageAnon(page)) {
-		if (vma->anon_vma->root != page_anon_vma(page)->root)
+		struct anon_vma *page__anon_vma = page_anon_vma(page);
+		/*
+		 * Note: swapoff's unuse_vma() is more efficient with this
+		 * check, and needs it to match anon_vma when KSM is active.
+		 */
+		if (!vma->anon_vma || !page__anon_vma ||
+		    vma->anon_vma->root != page__anon_vma->root)
 			return -EFAULT;
 	} else if (page->mapping && !(vma->vm_flags & VM_NONLINEAR)) {
 		if (!vma->vm_file ||

From 4e31635c367a9e21a43cfbfae4c9deda2e19d1f4 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hughd@google.com>
Date: Sat, 2 Oct 2010 17:49:08 -0700
Subject: [PATCH 714/728] ksm: fix bad user data when swapping

Building under memory pressure, with KSM on 2.6.36-rc5, collapsed with
an internal compiler error: typically indicating an error in swapping.

Perhaps there's a timing issue which makes it now more likely, perhaps
it's just a long time since I tried for so long: this bug goes back to
KSM swapping in 2.6.33.

Notice how reuse_swap_page() allows an exclusive page to be reused, but
only does SetPageDirty if it can delete it from swap cache right then -
if it's currently under Writeback, it has to be left in cache and we
don't SetPageDirty, but the page can be reused.  Fine, the dirty bit
will get set in the pte; but notice how zap_pte_range() does not bother
to transfer pte_dirty to page_dirty when unmapping a PageAnon.

If KSM chooses to share such a page, it will look like a clean copy of
swapcache, and not be written out to swap when its memory is needed;
then stale data read back from swap when it's needed again.

We could fix this in reuse_swap_page() (or even refuse to reuse a
page under writeback), but it's more honest to fix my oversight in
KSM's write_protect_page().  Several days of testing on three machines
confirms that this fixes the issue they showed.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/ksm.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/mm/ksm.c b/mm/ksm.c
index b1873cf03ed9..65ab5c7067d9 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -712,7 +712,7 @@ static int write_protect_page(struct vm_area_struct *vma, struct page *page,
 	if (!ptep)
 		goto out;
 
-	if (pte_write(*ptep)) {
+	if (pte_write(*ptep) || pte_dirty(*ptep)) {
 		pte_t entry;
 
 		swapped = PageSwapCache(page);
@@ -735,7 +735,9 @@ static int write_protect_page(struct vm_area_struct *vma, struct page *page,
 			set_pte_at(mm, addr, ptep, entry);
 			goto out_unlock;
 		}
-		entry = pte_wrprotect(entry);
+		if (pte_dirty(entry))
+			set_page_dirty(page);
+		entry = pte_mkclean(pte_wrprotect(entry));
 		set_pte_at_notify(mm, addr, ptep, entry);
 	}
 	*orig_pte = *ptep;

From 4e18b3edf71f5d4ad653e3c2ff6560878e965f96 Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Mon, 4 Oct 2010 02:28:36 +0000
Subject: [PATCH 715/728] cls_u32: signedness bug

skb_headroom() is unsigned so "skb_headroom(skb) + toff" is also
unsigned and can't be less than zero.  This test was added in 66d50d25:
"u32: negative offset fix"  It was supposed to fix a regression.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/cls_u32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c
index 7416a5c73b2a..b0c2a82178af 100644
--- a/net/sched/cls_u32.c
+++ b/net/sched/cls_u32.c
@@ -137,7 +137,7 @@ next_knode:
 			int toff = off + key->off + (off2 & key->offmask);
 			__be32 *data, _data;
 
-			if (skb_headroom(skb) + toff < 0)
+			if (skb_headroom(skb) + toff > INT_MAX)
 				goto out;
 
 			data = skb_header_pointer(skb, toff, 4, &_data);

From a947f0f8f7012a5e8689a9cff7209ec6964ec154 Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Mon, 4 Oct 2010 16:10:06 +0100
Subject: [PATCH 716/728] xen: do not set xenstored_ready before xenbus_probe
 on hvm

Register_xenstore_notifier should guarantee that the caller gets
notified even if xenstore is already up.
Therefore we revert "do not notify callers from
register_xenstore_notifier" and set xenstored_read at the right time for
PV on HVM guests too.
In fact in case of PV on HVM guests xenstored is ready only after the
platform pci driver has completed the initialization, so do not set
xenstored_ready before the call to xenbus_probe().

This patch fixes a shutdown_event watcher registration bug that causes
"xm shutdown" not to work properly.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 drivers/xen/xenbus/xenbus_probe.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/xenbus/xenbus_probe.c b/drivers/xen/xenbus/xenbus_probe.c
index 29bac5118877..d409495876f1 100644
--- a/drivers/xen/xenbus/xenbus_probe.c
+++ b/drivers/xen/xenbus/xenbus_probe.c
@@ -755,7 +755,10 @@ int register_xenstore_notifier(struct notifier_block *nb)
 {
 	int ret = 0;
 
-	blocking_notifier_chain_register(&xenstore_chain, nb);
+	if (xenstored_ready > 0)
+		ret = nb->notifier_call(nb, 0, NULL);
+	else
+		blocking_notifier_chain_register(&xenstore_chain, nb);
 
 	return ret;
 }
@@ -769,7 +772,7 @@ EXPORT_SYMBOL_GPL(unregister_xenstore_notifier);
 
 void xenbus_probe(struct work_struct *unused)
 {
-	BUG_ON((xenstored_ready <= 0));
+	xenstored_ready = 1;
 
 	/* Enumerate devices in xenstore and watch for changes. */
 	xenbus_probe_devices(&xenbus_frontend);
@@ -835,8 +838,8 @@ static int __init xenbus_init(void)
 			xen_store_evtchn = xen_start_info->store_evtchn;
 			xen_store_mfn = xen_start_info->store_mfn;
 			xen_store_interface = mfn_to_virt(xen_store_mfn);
+			xenstored_ready = 1;
 		}
-		xenstored_ready = 1;
 	}
 
 	/* Initialize the interface to xenstore. */

From 31e7e931cdc27f76dc68444edc4df1c0d1bfa6cc Mon Sep 17 00:00:00 2001
From: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Date: Fri, 1 Oct 2010 17:35:46 +0100
Subject: [PATCH 717/728] xen: do not initialize PV timers on HVM if
 !xen_have_vector_callback

if !xen_have_vector_callback do not initialize PV timer unconditionally
because we still don't know how many cpus are available and if there is
more than one we won't be able to receive the timer interrupts on
cpu > 0.

This patch fixes an hang at boot when Xen does not support vector
callbacks and the guest has multiple vcpus.

Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
---
 arch/x86/xen/time.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 1a5353a753fc..b2bb5aa3b054 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -489,8 +489,9 @@ static void xen_hvm_setup_cpu_clockevents(void)
 __init void xen_hvm_init_time_ops(void)
 {
 	/* vector callback is needed otherwise we cannot receive interrupts
-	 * on cpu > 0 */
-	if (!xen_have_vector_callback && num_present_cpus() > 1)
+	 * on cpu > 0 and at this point we don't know how many cpus are
+	 * available */
+	if (!xen_have_vector_callback)
 		return;
 	if (!xen_feature(XENFEAT_hvm_safe_pvclock)) {
 		printk(KERN_INFO "Xen doesn't support pvclock on HVM,"

From 5336377d6225959624146629ce3fc88ee8ecda3d Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 5 Oct 2010 11:29:27 -0700
Subject: [PATCH 718/728] modules: Fix module_bug_list list corruption race

With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.

However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling.  That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.

Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.

So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.

Future fixups:
 - move the module list handling code into kernel/module.c where it
   belongs.
 - get rid of 'module_bug_list' and just use the regular list of modules
   (called 'modules' - imagine that) that we already create and maintain
   for other reasons.

Reported-and-tested-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/avr32/kernel/module.c   | 3 +--
 arch/h8300/kernel/module.c   | 3 +--
 arch/mn10300/kernel/module.c | 3 +--
 arch/parisc/kernel/module.c  | 3 +--
 arch/powerpc/kernel/module.c | 5 -----
 arch/s390/kernel/module.c    | 3 +--
 arch/sh/kernel/module.c      | 2 --
 arch/x86/kernel/module.c     | 3 +--
 include/linux/module.h       | 5 ++---
 kernel/module.c              | 4 ++++
 lib/bug.c                    | 6 ++----
 11 files changed, 14 insertions(+), 26 deletions(-)

diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 98f94d041d9c..a727f54d64d6 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -314,10 +314,9 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
 	vfree(module->arch.syminfo);
 	module->arch.syminfo = NULL;
 
-	return module_bug_finalize(hdr, sechdrs, module);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *module)
 {
-	module_bug_cleanup(module);
 }
diff --git a/arch/h8300/kernel/module.c b/arch/h8300/kernel/module.c
index 0865e291c20d..db4953dc4e1b 100644
--- a/arch/h8300/kernel/module.c
+++ b/arch/h8300/kernel/module.c
@@ -112,10 +112,9 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return module_bug_finalize(hdr, sechdrs, me);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
-	module_bug_cleanup(mod);
 }
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 6aea7fd76993..196a111e2e29 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -206,7 +206,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return module_bug_finalize(hdr, sechdrs, me);
+	return 0;
 }
 
 /*
@@ -214,5 +214,4 @@ int module_finalize(const Elf_Ehdr *hdr,
  */
 void module_arch_cleanup(struct module *mod)
 {
-	module_bug_cleanup(mod);
 }
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index 159a2b81e90c..6e81bb596e5b 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -941,11 +941,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 	nsyms = newptr - (Elf_Sym *)symhdr->sh_addr;
 	DEBUGP("NEW num_symtab %lu\n", nsyms);
 	symhdr->sh_size = nsyms * sizeof(Elf_Sym);
-	return module_bug_finalize(hdr, sechdrs, me);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
 	deregister_unwind_table(mod);
-	module_bug_cleanup(mod);
 }
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 477c663e0140..4ef93ae2235f 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -65,10 +65,6 @@ int module_finalize(const Elf_Ehdr *hdr,
 	const Elf_Shdr *sect;
 	int err;
 
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)
-		return err;
-
 	/* Apply feature fixups */
 	sect = find_section(hdr, sechdrs, "__ftr_fixup");
 	if (sect != NULL)
@@ -101,5 +97,4 @@ int module_finalize(const Elf_Ehdr *hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	module_bug_cleanup(mod);
 }
diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c
index 22cfd634c355..f7167ee4604c 100644
--- a/arch/s390/kernel/module.c
+++ b/arch/s390/kernel/module.c
@@ -407,10 +407,9 @@ int module_finalize(const Elf_Ehdr *hdr,
 {
 	vfree(me->arch.syminfo);
 	me->arch.syminfo = NULL;
-	return module_bug_finalize(hdr, sechdrs, me);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
-	module_bug_cleanup(mod);
 }
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index 43adddfe4c04..ae0be697a89e 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -149,13 +149,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 	int ret = 0;
 
 	ret |= module_dwarf_finalize(hdr, sechdrs, me);
-	ret |= module_bug_finalize(hdr, sechdrs, me);
 
 	return ret;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
-	module_bug_cleanup(mod);
 	module_dwarf_cleanup(mod);
 }
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index e0bc186d7501..1c355c550960 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -239,11 +239,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		apply_paravirt(pseg, pseg + para->sh_size);
 	}
 
-	return module_bug_finalize(hdr, sechdrs, me);
+	return 0;
 }
 
 void module_arch_cleanup(struct module *mod)
 {
 	alternatives_smp_module_del(mod);
-	module_bug_cleanup(mod);
 }
diff --git a/include/linux/module.h b/include/linux/module.h
index 8a6b9fdc7ffa..aace066bad8f 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -686,17 +686,16 @@ extern int module_sysfs_initialized;
 
 
 #ifdef CONFIG_GENERIC_BUG
-int  module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
+void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
 			 struct module *);
 void module_bug_cleanup(struct module *);
 
 #else	/* !CONFIG_GENERIC_BUG */
 
-static inline int  module_bug_finalize(const Elf_Ehdr *hdr,
+static inline void module_bug_finalize(const Elf_Ehdr *hdr,
 					const Elf_Shdr *sechdrs,
 					struct module *mod)
 {
-	return 0;
 }
 static inline void module_bug_cleanup(struct module *mod) {}
 #endif	/* CONFIG_GENERIC_BUG */
diff --git a/kernel/module.c b/kernel/module.c
index d0b5f8db11b4..ccd641991842 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1537,6 +1537,7 @@ static int __unlink_module(void *_mod)
 {
 	struct module *mod = _mod;
 	list_del(&mod->list);
+	module_bug_cleanup(mod);
 	return 0;
 }
 
@@ -2625,6 +2626,7 @@ static struct module *load_module(void __user *umod,
 	if (err < 0)
 		goto ddebug;
 
+	module_bug_finalize(info.hdr, info.sechdrs, mod);
 	list_add_rcu(&mod->list, &modules);
 	mutex_unlock(&module_mutex);
 
@@ -2650,6 +2652,8 @@ static struct module *load_module(void __user *umod,
 	mutex_lock(&module_mutex);
 	/* Unlink carefully: kallsyms could be walking list. */
 	list_del_rcu(&mod->list);
+	module_bug_cleanup(mod);
+
  ddebug:
 	if (!mod->taints)
 		dynamic_debug_remove(info.debug);
diff --git a/lib/bug.c b/lib/bug.c
index 7cdfad88128f..19552096d16b 100644
--- a/lib/bug.c
+++ b/lib/bug.c
@@ -72,8 +72,8 @@ static const struct bug_entry *module_find_bug(unsigned long bugaddr)
 	return NULL;
 }
 
-int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-			struct module *mod)
+void module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+			 struct module *mod)
 {
 	char *secstrings;
 	unsigned int i;
@@ -97,8 +97,6 @@ int module_bug_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
 	 * could potentially lead to deadlock and thus be counter-productive.
 	 */
 	list_add(&mod->bug_list, &module_bug_list);
-
-	return 0;
 }
 
 void module_bug_cleanup(struct module *mod)

From 231d0aefd88e94129cb8fb84794f9bb788c6366e Mon Sep 17 00:00:00 2001
From: Evgeny Kuznetsov <ext-eugeny.kuznetsov@nokia.com>
Date: Tue, 5 Oct 2010 12:47:57 +0400
Subject: [PATCH 719/728] wait: using uninitialized member of wait queue

The "flags" member of "struct wait_queue_t" is used in several places in
the kernel code without beeing initialized by init_wait().  "flags" is
used in bitwise operations.

If "flags" not initialized then unexpected behaviour may take place.
Incorrect flags might used later in code.

Added initialization of "wait_queue_t.flags" with zero value into
"init_wait".

Signed-off-by: Evgeny Kuznetsov <EXT-Eugeny.Kuznetsov@nokia.com>
[ The bit we care about does end up being initialized by both
   prepare_to_wait() and add_to_wait_queue(), so this doesn't seem to
   cause actual bugs, but is definitely the right thing to do -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/wait.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/wait.h b/include/linux/wait.h
index 0836ccc57121..3efc9f3f43a0 100644
--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -614,6 +614,7 @@ int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
 		(wait)->private = current;				\
 		(wait)->func = autoremove_wake_function;		\
 		INIT_LIST_HEAD(&(wait)->task_list);			\
+		(wait)->flags = 0;					\
 	} while (0)
 
 /**

From c4b8c01112a16f3cb8a4bffb11b89f2df079f904 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 5 Oct 2010 01:16:44 +0000
Subject: [PATCH 720/728] ixgbevf.txt: Update ixgbevf documentation

Update the documentation for the ixgbevf (ixgbe virtual
function driver).

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/ixgbevf.txt | 40 +++-------------------------
 1 file changed, 3 insertions(+), 37 deletions(-)
 mode change 100755 => 100644 Documentation/networking/ixgbevf.txt

diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
old mode 100755
new mode 100644
index 19015de6725f..21dd5d15b6b4
--- a/Documentation/networking/ixgbevf.txt
+++ b/Documentation/networking/ixgbevf.txt
@@ -1,19 +1,16 @@
 Linux* Base Driver for Intel(R) Network Connection
 ==================================================
 
-November 24, 2009
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
 - Known Issues/Troubleshooting
 - Support
 
-In This Release
-===============
-
 This file describes the ixgbevf Linux* Base Driver for Intel Network
 Connection.
 
@@ -33,7 +30,7 @@ Identifying Your Adapter
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/sb/CS-008441.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 Known Issues/Troubleshooting
 ============================
@@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at:
 If an issue is identified with the released source code on the supported
 kernel with a supported adapter, email the specific information related
 to the issue to e1000-devel@lists.sf.net
-
-License
-=======
-
-Intel 10 Gigabit Linux driver.
-Copyright(c) 1999 - 2009 Intel Corporation.
-
-This program is free software; you can redistribute it and/or modify it
-under the terms and conditions of the GNU General Public License,
-version 2, as published by the Free Software Foundation.
-
-This program is distributed in the hope it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
-The full GNU General Public License is included in this distribution in
-the file called "COPYING".
-
-Trademarks
-==========
-
-Intel, Itanium, and Pentium are trademarks or registered trademarks of
-Intel Corporation or its subsidiaries in the United States and other
-countries.
-
-* Other names and brands may be claimed as the property of others.

From 2bff89c3f340776398bfaf6c94404ffcd09f6e77 Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 5 Oct 2010 01:17:05 +0000
Subject: [PATCH 721/728] e1000.txt: Update e1000 documentation

Updated the e1000 networking driver documentation.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/e1000.txt | 373 ++++++++---------------------
 1 file changed, 96 insertions(+), 277 deletions(-)

diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index 2df71861e578..d9271e74e488 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -1,82 +1,35 @@
 Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters
 ===============================================================
 
-September 26, 2006
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
-- Building and Installation
 - Command Line Parameters
 - Speed and Duplex Configuration
 - Additional Configurations
-- Known Issues
 - Support
 
-
-In This Release
-===============
-
-This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family
-of Adapters.  This driver includes support for Itanium(R)2-based systems.
-
-For questions related to hardware requirements, refer to the documentation
-supplied with your Intel PRO/1000 adapter. All hardware requirements listed
-apply to use with Linux.
-
-The following features are now available in supported kernels:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
-
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
-
-The driver information previously displayed in the /proc filesystem is not
-supported in this release.  Alternatively, you can use ethtool (version 1.6
-or later), lspci, and ifconfig to obtain the same information.
-
-Instructions on updating ethtool can be found in the section "Additional
-Configurations" later in this document.
-
-NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100
-support.
-
-
 Identifying Your Adapter
 ========================
 
 For more information on how to identify your adapter, go to the Adapter &
 Driver ID Guide at:
 
-    http://support.intel.com/support/network/adapter/pro100/21397.htm
+    http://support.intel.com/support/go/network/adapter/idguide.htm
 
 For the latest Intel network drivers for Linux, refer to the following
 website.  In the search field, enter your adapter name or type, or use the
 networking link on the left to search for your adapter:
 
-    http://downloadfinder.intel.com/scripts-df/support_intel.asp
-
+    http://support.intel.com/support/go/network/adapter/home.htm
 
 Command Line Parameters
 =======================
 
-If the driver is built as a module, the  following optional parameters
-are used by entering them on the command line with the modprobe command
-using this syntax:
-
-     modprobe e1000 [<option>=<VAL1>,<VAL2>,...]
-
-For example, with two PRO/1000 PCI adapters, entering:
-
-     modprobe e1000 TxDescriptors=80,128
-
-loads the e1000 driver with 80 TX descriptors for the first adapter and
-128 TX descriptors for the second adapter.
-
 The default value for each parameter is generally the recommended setting,
 unless otherwise noted.
 
@@ -89,10 +42,6 @@ NOTES:  For more information about the AutoNeg, Duplex, and Speed
         parameters, see the application note at:
         http://www.intel.com/design/network/applnots/ap450.htm
 
-        A descriptor describes a data buffer and attributes related to
-        the data buffer.  This information is accessed by the hardware.
-
-
 AutoNeg
 -------
 (Supported only on adapters with copper connections)
@@ -106,7 +55,6 @@ Duplex parameters must not be specified.
 NOTE:  Refer to the Speed and Duplex section of this readme for more
        information on the AutoNeg parameter.
 
-
 Duplex
 ------
 (Supported only on adapters with copper connections)
@@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex.  If the
 link partner is forced (either full or half), Duplex defaults to half-
 duplex.
 
-
 FlowControl
 -----------
 Valid Range:   0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx)
@@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM
 This parameter controls the automatic generation(Tx) and response(Rx)
 to Ethernet PAUSE frames.
 
-
 InterruptThrottleRate
 ---------------------
 (not supported on Intel(R) 82542, 82543 or 82544-based adapters)
-Valid Range:   0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
 Default Value: 3
 
 The driver can limit the amount of interrupts per second that the adapter
-will generate for incoming packets. It does this by writing a value to the 
-adapter that is based on the maximum amount of interrupts that the adapter 
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
 will generate per second.
 
 Setting InterruptThrottleRate to a value greater or equal to 100
@@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt
 load on the system and can lower CPU utilization under heavy load,
 but will increase latency as packets are not processed as quickly.
 
-The default behaviour of the driver previously assumed a static 
-InterruptThrottleRate value of 8000, providing a good fallback value for 
-all traffic types,but lacking in small packet performance and latency. 
-The hardware can handle many more small packets per second however, and 
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types,but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
 for this reason an adaptive interrupt moderation algorithm was implemented.
 
 Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which
-it dynamically adjusts the InterruptThrottleRate value based on the traffic 
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
 that it receives. After determining the type of incoming traffic in the last
-timeframe, it will adjust the InterruptThrottleRate to an appropriate value 
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
 for that traffic.
 
 The algorithm classifies the incoming traffic every interval into
-classes.  Once the class is determined, the InterruptThrottleRate value is 
-adjusted to suit that traffic type the best. There are three classes defined: 
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
 "Bulk traffic", for large amounts of packets of normal size; "Low latency",
 for small amounts of traffic and/or a significant percentage of small
-packets; and "Lowest latency", for almost completely small packets or 
+packets; and "Lowest latency", for almost completely small packets or
 minimal traffic.
 
-In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 
-for traffic that falls in class "Bulk traffic". If traffic falls in the "Low 
-latency" or "Lowest latency" class, the InterruptThrottleRate is increased 
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
 stepwise to 20000. This default mode is suitable for most applications.
 
 For situations where low latency is vital such as cluster or
 grid computing, the algorithm can reduce latency even more when
 InterruptThrottleRate is set to mode 1. In this mode, which operates
-the same as mode 3, the InterruptThrottleRate will be increased stepwise to 
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
 70000 for traffic in class "Lowest latency".
 
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal, the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
 Setting InterruptThrottleRate to 0 turns off any interrupt moderation
 and may improve small packet latency, but is generally not suitable
 for bulk throughput traffic.
@@ -212,8 +165,6 @@ NOTE:  When e1000 is loaded with default settings and multiple adapters
        be platform-specific.  If CPU utilization is not a concern, use
        RX_POLLING (NAPI) and default driver settings.
 
-
-
 RxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -225,15 +176,14 @@ by the driver.  Increasing this value allows the driver to buffer more
 incoming packets, at the expense of increased system memory utilization.
 
 Each descriptor is 16 bytes.  A receive buffer is also allocated for each
-descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending 
+descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending
 on the MTU setting. The maximum MTU size is 16110.
 
-NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo 
-       Frames.  Depending on the available system resources, the request 
-       for a higher number of receive descriptors may be denied.  In this 
+NOTE:  MTU designates the frame size.  It only needs to be set for Jumbo
+       Frames.  Depending on the available system resources, the request
+       for a higher number of receive descriptors may be denied.  In this
        case, use a lower number.
 
-
 RxIntDelay
 ----------
 Valid Range:   0-65535 (0=off)
@@ -254,7 +204,6 @@ CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
           restoring the network connection.  To eliminate the potential
           for the hang ensure that RxIntDelay is set to 0.
 
-
 RxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -268,7 +217,6 @@ packet is received within the set amount of time.  Proper tuning,
 along with RxIntDelay, may improve traffic throughput in specific network
 conditions.
 
-
 Speed
 -----
 (This parameter is supported only on adapters with copper connections.)
@@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second
 partner is set to auto-negotiate, the board will auto-detect the correct
 speed.  Duplex should also be set when Speed is set to either 10 or 100.
 
-
 TxDescriptors
 -------------
 Valid Range:   80-256 for 82542 and 82543-based adapters
@@ -295,6 +242,36 @@ NOTE:  Depending on the available system resources, the request for a
        higher number of transmit descriptors may be denied.  In this case,
        use a lower number.
 
+TxDescriptorStep
+----------------
+Valid Range:    1 (use every Tx Descriptor)
+		4 (use every 4th Tx Descriptor)
+
+Default Value:  1 (use every Tx Descriptor)
+
+On certain non-Intel architectures, it has been observed that intense TX
+traffic bursts of short packets may result in an improper descriptor
+writeback. If this occurs, the driver will report a "TX Timeout" and reset
+the adapter, after which the transmit flow will restart, though data may
+have stalled for as much as 10 seconds before it resumes.
+
+The improper writeback does not occur on the first descriptor in a system
+memory cache-line, which is typically 32 bytes, or 4 descriptors long.
+
+Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
+are aligned to the start of a system memory cache line, and so this problem
+will not occur.
+
+NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
+       TxDescriptors available for transmits to 1/4 of the normal allocation.
+       This has a possible negative performance impact, which may be
+       compensated for by allocating more descriptors using the TxDescriptors
+       module parameter.
+
+       There are other conditions which may result in "TX Timeout", which will
+       not be resolved by the use of the TxDescriptorStep parameter. As the
+       issue addressed by this parameter has never been observed on Intel
+       Architecture platforms, it should not be used on Intel platforms.
 
 TxIntDelay
 ----------
@@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic.  If the
 system is reporting dropped transmits, this value may be set too high
 causing the driver to run out of available transmit descriptors.
 
-
 TxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
@@ -330,6 +306,35 @@ Default Value: 1
 A value of '1' indicates that the driver should enable IP checksum
 offload for received packets (both UDP and TCP) to the adapter hardware.
 
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+Usage: insmod e1000.ko copybreak=128
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can turn off
+this parameter in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
 
 Speed and Duplex Configuration
 ==============================
@@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this
 parameter should not be used.  Instead, use the Speed and Duplex parameters
 previously mentioned to force the adapter to the same speed and duplex.
 
-
 Additional Configurations
 =========================
 
-  Configuring the Driver on Different Distributions
-  -------------------------------------------------
-  Configuring a network driver to load properly when the system is started
-  is distribution dependent.  Typically, the configuration process involves
-  adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well
-  as editing other system startup scripts and/or configuration files.  Many
-  popular Linux distributions ship with tools to make these changes for you.
-  To learn the proper way to configure a network device for your system,
-  refer to your distribution documentation.  If during this process you are
-  asked for the driver or module name, the name for the Linux Base Driver
-  for the Intel(R) PRO/1000 Family of Adapters is e1000.
-
-  As an example, if you install the e1000 driver for two PRO/1000 adapters
-  (eth0 and eth1) and set the speed and duplex to 10full and 100half, add
-  the following to modules.conf or or modprobe.conf:
-
-       alias eth0 e1000
-       alias eth1 e1000
-       options e1000 Speed=10,100 Duplex=2,1
-
-  Viewing Link Messages
-  ---------------------
-  Link messages will not be displayed to the console if the distribution is
-  restricting system messages.  In order to see network driver link messages
-  on your console, set dmesg to eight by entering the following:
-
-       dmesg -n 8
-
-  NOTE: This setting is not saved across reboots.
-
   Jumbo Frames
   ------------
   Jumbo Frames support is enabled by changing the MTU to a value larger than
@@ -437,9 +411,11 @@ Additional Configurations
    setting in a different location.
 
   Notes:
-
-  - To enable Jumbo Frames, increase the MTU size on the interface beyond
-    1500.
+  Degradation in throughput performance may be observed in some Jumbo frames
+  environments. If this is observed, increasing the application's socket buffer
+  size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
+  See the specific application manual and /usr/src/linux*/Documentation/
+  networking/ip-sysctl.txt for more details.
 
   - The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
     with the maximum Jumbo Frames size of 16128.
@@ -447,40 +423,11 @@ Additional Configurations
   - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or
     loss of link.
 
-  - Some Intel gigabit adapters that support Jumbo Frames have a frame size
-    limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes.
-    The adapters with this limitation are based on the Intel(R) 82571EB,
-    82572EI, 82573L and 80003ES2LAN controller.  These correspond to the
-    following product names:
-     Intel(R) PRO/1000 PT Server Adapter
-     Intel(R) PRO/1000 PT Desktop Adapter
-     Intel(R) PRO/1000 PT Network Connection
-     Intel(R) PRO/1000 PT Dual Port Server Adapter
-     Intel(R) PRO/1000 PT Dual Port Network Connection
-     Intel(R) PRO/1000 PF Server Adapter
-     Intel(R) PRO/1000 PF Network Connection
-     Intel(R) PRO/1000 PF Dual Port Server Adapter
-     Intel(R) PRO/1000 PB Server Connection
-     Intel(R) PRO/1000 PL Network Connection
-     Intel(R) PRO/1000 EB Network Connection with I/O Acceleration
-     Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration
-     Intel(R) PRO/1000 PT Quad Port Server Adapter
-
   - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
     support Jumbo Frames. These correspond to the following product names:
      Intel(R) PRO/1000 Gigabit Server Adapter
      Intel(R) PRO/1000 PM Network Connection
 
-  - The following adapters do not support Jumbo Frames:
-     Intel(R) 82562V 10/100 Network Connection
-     Intel(R) 82566DM Gigabit Network Connection
-     Intel(R) 82566DC Gigabit Network Connection
-     Intel(R) 82566MM Gigabit Network Connection
-     Intel(R) 82566MC Gigabit Network Connection
-     Intel(R) 82562GT 10/100 Network Connection
-     Intel(R) 82562G 10/100 Network Connection
-
-
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
@@ -490,142 +437,14 @@ Additional Configurations
   The latest release of ethtool can be found from
   http://sourceforge.net/projects/gkernel.
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options.  Support
-  for a more complete ethtool feature set can be enabled by upgrading
-  ethtool to ethtool-1.8.1.
-
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility.  Ethtool is included with
-  all versions of Red Hat after Red Hat 7.2.  For other Linux distributions,
-  download and install Ethtool from the following website:
-  http://sourceforge.net/projects/gkernel.
-
-  For instructions on enabling WoL with Ethtool, refer to the website listed
-  above.
+  WoL is configured through the Ethtool* utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be
   loaded when shutting down or rebooting the system.
 
-  Wake On LAN is only supported on port A for the following devices:
-  Intel(R) PRO/1000 PT Dual Port Network Connection
-  Intel(R) PRO/1000 PT Dual Port Server Connection
-  Intel(R) PRO/1000 PT Dual Port Server Adapter
-  Intel(R) PRO/1000 PF Dual Port Server Adapter
-  Intel(R) PRO/1000 PT Quad Port Server Adapter
-
-  NAPI
-  ----
-  NAPI (Rx polling mode) is enabled in the e1000 driver.
-
-  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
-
-
-Known Issues
-============
-
-Dropped Receive Packets on Half-duplex 10/100 Networks
-------------------------------------------------------
-If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half-
-duplex, you may observe occasional dropped receive packets.  There are no
-workarounds for this problem in this network configuration.  The network must
-be updated to operate in full-duplex, and/or 1000mbps only.
-
-Jumbo Frames System Requirement
--------------------------------
-Memory allocation failures have been observed on Linux systems with 64 MB
-of RAM or less that are running Jumbo Frames.  If you are using Jumbo
-Frames, your system may require more than the advertised minimum
-requirement of 64 MB of system memory.
-
-Performance Degradation with Jumbo Frames
------------------------------------------
-Degradation in throughput performance may be observed in some Jumbo frames
-environments.  If this is observed, increasing the application's socket
-buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values
-may help.  See the specific application manual and
-/usr/src/linux*/Documentation/
-networking/ip-sysctl.txt for more details.
-
-Jumbo Frames on Foundry BigIron 8000 switch
--------------------------------------------
-There is a known issue using Jumbo frames when connected to a Foundry
-BigIron 8000 switch.  This is a 3rd party limitation.  If you experience
-loss of packets, lower the MTU size.
-
-Allocating Rx Buffers when Using Jumbo Frames 
----------------------------------------------
-Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if 
-the available memory is heavily fragmented. This issue may be seen with PCI-X 
-adapters or with packet split disabled. This can be reduced or eliminated 
-by changing the amount of available memory for receive buffer allocation, by
-increasing /proc/sys/vm/min_free_kbytes. 
-
-Multiple Interfaces on Same Ethernet Broadcast Network
-------------------------------------------------------
-Due to the default ARP behavior on Linux, it is not possible to have
-one system on two IP networks in the same Ethernet broadcast domain
-(non-partitioned switch) behave as expected.  All Ethernet interfaces
-will respond to IP traffic for any IP address assigned to the system.
-This results in unbalanced receive traffic.
-
-If you have multiple interfaces in a server, either turn on ARP
-filtering by entering:
-
-    echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-(this only works if your kernel's version is higher than 2.4.5),
-
-NOTE: This setting is not saved across reboots.  The configuration
-change can be made permanent by adding the line:
-    net.ipv4.conf.all.arp_filter = 1
-to the file /etc/sysctl.conf
-
-      or,
-
-install the interfaces in separate broadcast domains (either in
-different switches or in a switch partitioned to VLANs).
-
-82541/82547 can't link or are slow to link with some link partners
------------------------------------------------------------------
-There is a known compatibility issue with 82541/82547 and some
-low-end switches where the link will not be established, or will
-be slow to establish.  In particular, these switches are known to
-be incompatible with 82541/82547:
-
-    Planex FXG-08TE
-    I-O Data ETG-SH8
-
-To workaround this issue, the driver can be compiled with an override
-of the PHY's master/slave setting.  Forcing master or forcing slave
-mode will improve time-to-link.
-
-    # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n>
-
-Where <n> is:
-
-    0 = Hardware default
-    1 = Master mode
-    2 = Slave mode
-    3 = Auto master/slave
-
-Disable rx flow control with ethtool
-------------------------------------
-In order to disable receive flow control using ethtool, you must turn
-off auto-negotiation on the same command line.
-
-For example:
-
-   ethtool -A eth? autoneg off rx off
-
-Unplugging network cable while ethtool -p is running
-----------------------------------------------------
-In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging
-the network cable while ethtool -p is running will cause the system to
-become unresponsive to keyboard commands, except for control-alt-delete.
-Restarting the system appears to be the only remedy.
-
-
 Support
 =======
 

From da8c01c4502adc1e7209a14626d583de7ca452fd Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 5 Oct 2010 01:17:27 +0000
Subject: [PATCH 722/728] e1000e.txt: Add e1000e documentation

Adds documentation for the e1000e networking driver.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 Documentation/networking/e1000e.txt | 302 ++++++++++++++++++++++++++++
 1 file changed, 302 insertions(+)
 create mode 100644 Documentation/networking/e1000e.txt

diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
new file mode 100644
index 000000000000..6aa048badf32
--- /dev/null
+++ b/Documentation/networking/e1000e.txt
@@ -0,0 +1,302 @@
+Linux* Driver for Intel(R) Network Connection
+===============================================================
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Command Line Parameters
+- Additional Configurations
+- Support
+
+Identifying Your Adapter
+========================
+
+The e1000e driver supports all PCI Express Intel(R) Gigabit Network
+Connections, except those that are 82575, 82576 and 82580-based*.
+
+* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by
+  the e1000 driver, not the e1000e driver due to the 82546 part being used
+  behind a PCI Express bridge.
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/go/network/adapter/idguide.htm
+
+For the latest Intel network drivers for Linux, refer to the following
+website.  In the search field, enter your adapter name or type, or use the
+networking link on the left to search for your adapter:
+
+    http://support.intel.com/support/go/network/adapter/home.htm
+
+Command Line Parameters
+=======================
+
+The default value for each parameter is generally the recommended setting,
+unless otherwise noted.
+
+NOTES:  For more information about the InterruptThrottleRate,
+        RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay
+        parameters, see the application note at:
+        http://www.intel.com/design/network/applnots/ap450.htm
+
+InterruptThrottleRate
+---------------------
+Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
+                                   4=simplified balancing)
+Default Value: 3
+
+The driver can limit the amount of interrupts per second that the adapter
+will generate for incoming packets. It does this by writing a value to the
+adapter that is based on the maximum amount of interrupts that the adapter
+will generate per second.
+
+Setting InterruptThrottleRate to a value greater or equal to 100
+will program the adapter to send out a maximum of that many interrupts
+per second, even if more packets have come in. This reduces interrupt
+load on the system and can lower CPU utilization under heavy load,
+but will increase latency as packets are not processed as quickly.
+
+The driver has two adaptive modes (setting 1 or 3) in which
+it dynamically adjusts the InterruptThrottleRate value based on the traffic
+that it receives. After determining the type of incoming traffic in the last
+timeframe, it will adjust the InterruptThrottleRate to an appropriate value
+for that traffic.
+
+The algorithm classifies the incoming traffic every interval into
+classes.  Once the class is determined, the InterruptThrottleRate value is
+adjusted to suit that traffic type the best. There are three classes defined:
+"Bulk traffic", for large amounts of packets of normal size; "Low latency",
+for small amounts of traffic and/or a significant percentage of small
+packets; and "Lowest latency", for almost completely small packets or
+minimal traffic.
+
+In dynamic conservative mode, the InterruptThrottleRate value is set to 4000
+for traffic that falls in class "Bulk traffic". If traffic falls in the "Low
+latency" or "Lowest latency" class, the InterruptThrottleRate is increased
+stepwise to 20000. This default mode is suitable for most applications.
+
+For situations where low latency is vital such as cluster or
+grid computing, the algorithm can reduce latency even more when
+InterruptThrottleRate is set to mode 1. In this mode, which operates
+the same as mode 3, the InterruptThrottleRate will be increased stepwise to
+70000 for traffic in class "Lowest latency".
+
+In simplified mode the interrupt rate is based on the ratio of Tx and
+Rx traffic.  If the bytes per second rate is approximately equal the
+interrupt rate will drop as low as 2000 interrupts per second.  If the
+traffic is mostly transmit or mostly receive, the interrupt rate could
+be as high as 8000.
+
+Setting InterruptThrottleRate to 0 turns off any interrupt moderation
+and may improve small packet latency, but is generally not suitable
+for bulk throughput traffic.
+
+NOTE:  InterruptThrottleRate takes precedence over the TxAbsIntDelay and
+       RxAbsIntDelay parameters.  In other words, minimizing the receive
+       and/or transmit absolute delays does not force the controller to
+       generate more interrupts than what the Interrupt Throttle Rate
+       allows.
+
+NOTE:  When e1000e is loaded with default settings and multiple adapters
+       are in use simultaneously, the CPU utilization may increase non-
+       linearly.  In order to limit the CPU utilization without impacting
+       the overall throughput, we recommend that you load the driver as
+       follows:
+
+           modprobe e1000e InterruptThrottleRate=3000,3000,3000
+
+       This sets the InterruptThrottleRate to 3000 interrupts/sec for
+       the first, second, and third instances of the driver.  The range
+       of 2000 to 3000 interrupts per second works on a majority of
+       systems and is a good starting point, but the optimal value will
+       be platform-specific.  If CPU utilization is not a concern, use
+       RX_POLLING (NAPI) and default driver settings.
+
+RxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 0
+
+This value delays the generation of receive interrupts in units of 1.024
+microseconds.  Receive interrupt reduction can improve CPU efficiency if
+properly tuned for specific network traffic.  Increasing this value adds
+extra latency to frame reception and can end up decreasing the throughput
+of TCP traffic.  If the system is reporting dropped receives, this value
+may be set too high, causing the driver to run out of available receive
+descriptors.
+
+CAUTION:  When setting RxIntDelay to a value other than 0, adapters may
+          hang (stop transmitting) under certain network conditions.  If
+          this occurs a NETDEV WATCHDOG message is logged in the system
+          event log.  In addition, the controller is automatically reset,
+          restoring the network connection.  To eliminate the potential
+          for the hang ensure that RxIntDelay is set to 0.
+
+RxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+receive interrupt is generated.  Useful only if RxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is received within the set amount of time.  Proper tuning,
+along with RxIntDelay, may improve traffic throughput in specific network
+conditions.
+
+TxIntDelay
+----------
+Valid Range:   0-65535 (0=off)
+Default Value: 8
+
+This value delays the generation of transmit interrupts in units of
+1.024 microseconds.  Transmit interrupt reduction can improve CPU
+efficiency if properly tuned for specific network traffic.  If the
+system is reporting dropped transmits, this value may be set too high
+causing the driver to run out of available transmit descriptors.
+
+TxAbsIntDelay
+-------------
+Valid Range:   0-65535 (0=off)
+Default Value: 32
+
+This value, in units of 1.024 microseconds, limits the delay in which a
+transmit interrupt is generated.  Useful only if TxIntDelay is non-zero,
+this value ensures that an interrupt is generated after the initial
+packet is sent on the wire within the set amount of time.  Proper tuning,
+along with TxIntDelay, may improve traffic throughput in specific
+network conditions.
+
+Copybreak
+---------
+Valid Range:   0-xxxxxxx (0=off)
+Default Value: 256
+
+Driver copies all packets below or equaling this size to a fresh Rx
+buffer before handing it up the stack.
+
+This parameter is different than other parameters, in that it is a
+single (not 1,1,1 etc.) parameter applied to all driver instances and
+it is also available during runtime at
+/sys/module/e1000e/parameters/copybreak
+
+SmartPowerDownEnable
+--------------------
+Valid Range: 0-1
+Default Value:  0 (disabled)
+
+Allows PHY to turn off in lower power states. The user can set this parameter
+in supported chipsets.
+
+KumeranLockLoss
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+This workaround skips resetting the PHY at shutdown for the initial
+silicon releases of ICH8 systems.
+
+IntMode
+-------
+Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X)
+Default Value: 2
+
+Allows changing the interrupt mode at module load time, without requiring a
+recompile. If the driver load fails to enable a specific interrupt mode, the
+driver will try other interrupt modes, from least to most compatible.  The
+interrupt order is MSI-X, MSI, Legacy.  If specifying MSI (IntMode=1)
+interrupts, only MSI and Legacy will be attempted.
+
+CrcStripping
+------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Strip the CRC from received packets before sending up the network stack.  If
+you have a machine with a BMC enabled but cannot receive IPMI traffic after
+loading or enabling the driver, try disabling this feature.
+
+WriteProtectNVM
+---------------
+Valid Range: 0-1
+Default Value: 1 (enabled)
+
+Set the hardware to ignore all write/erase cycles to the GbE region in the
+ICHx NVM (non-volatile memory).  This feature can be disabled by the
+WriteProtectNVM module parameter (enabled by default) only after a hardware
+reset, but the machine must be power cycled before trying to enable writes.
+
+Note: the kernel boot option iomem=relaxed may need to be set if the kernel
+config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
+NVM from user space via ethtool.
+
+Additional Configurations
+=========================
+
+  Jumbo Frames
+  ------------
+  Jumbo Frames support is enabled by changing the MTU to a value larger than
+  the default of 1500.  Use the ifconfig command to increase the MTU size.
+  For example:
+
+       ifconfig eth<x> mtu 9000 up
+
+  This setting is not saved across reboots.
+
+  Notes:
+
+  - The maximum MTU setting for Jumbo Frames is 9216.  This value coincides
+    with the maximum Jumbo Frames size of 9234 bytes.
+
+  - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in
+    poor performance or loss of link.
+
+  - Some adapters limit Jumbo Frames sized packets to a maximum of
+    4096 bytes and some adapters do not support Jumbo Frames.
+
+
+  Ethtool
+  -------
+  The driver utilizes the ethtool interface for driver configuration and
+  diagnostics, as well as displaying statistical information.  We
+  strongly recommend downloading the latest version of Ethtool at:
+
+  http://sourceforge.net/projects/gkernel.
+
+  Speed and Duplex
+  ----------------
+  Speed and Duplex are configured through the Ethtool* utility. For
+  instructions,  refer to the Ethtool man page.
+
+  Enabling Wake on LAN* (WoL)
+  ---------------------------
+  WoL is configured through the Ethtool* utility. For instructions on
+  enabling WoL with Ethtool, refer to the Ethtool man page.
+
+  WoL will be enabled on the system during the next shut down or reboot.
+  For this driver version, in order to enable WoL, the e1000e driver must be
+  loaded when shutting down or rebooting the system.
+
+  In most cases Wake On LAN is only supported on port A for multiple port
+  adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    www.intel.com/support/
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net

From 0d164401354011e771c850ba1f04a6ae883f82ab Mon Sep 17 00:00:00 2001
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Tue, 5 Oct 2010 01:15:17 +0000
Subject: [PATCH 723/728] MAINTAINERS: update Intel LAN Ethernet info

- Add ixgbevf and docs files to the maintainers file

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 MAINTAINERS | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 44e659530910..20a03b93bda5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3050,16 +3050,27 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
 M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
 M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
 M:	Bruce Allan <bruce.w.allan@intel.com>
-M:	Alex Duyck <alexander.h.duyck@intel.com>
+M:	Carolyn Wyborny <carolyn.wyborny@intel.com>
+M:	Don Skidmore <donald.c.skidmore@intel.com>
+M:	Greg Rose <gregory.v.rose@intel.com>
 M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
+F:	Documentation/networking/e100.txt
+F:	Documentation/networking/e1000.txt
+F:	Documentation/networking/e1000e.txt
+F:	Documentation/networking/igb.txt
+F:	Documentation/networking/igbvf.txt
+F:	Documentation/networking/ixgb.txt
+F:	Documentation/networking/ixgbe.txt
+F:	Documentation/networking/ixgbevf.txt
 F:	drivers/net/e100.c
 F:	drivers/net/e1000/
 F:	drivers/net/e1000e/
@@ -3067,6 +3078,7 @@ F:	drivers/net/igb/
 F:	drivers/net/igbvf/
 F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
+F:	drivers/net/ixgbevf/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 L:	linux-wireless@vger.kernel.org

From 392bd0cb000d4aac9e88e4f50823db85e7220688 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <sgruszka@redhat.com>
Date: Tue, 5 Oct 2010 15:11:40 -0700
Subject: [PATCH 724/728] skge: add quirk to limit DMA

Skge devices installed on some Gigabyte motherboards are not able to
perform 64 dma correctly due to board PCI implementation, so limit
DMA to 32bit if such boards are detected.

Bug was reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=447489

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Tested-by: Luya Tshimbalanga <luya@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/skge.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 40e5c46e7571..465ae7e84507 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -43,6 +43,7 @@
 #include <linux/seq_file.h>
 #include <linux/mii.h>
 #include <linux/slab.h>
+#include <linux/dmi.h>
 #include <asm/irq.h>
 
 #include "skge.h"
@@ -3868,6 +3869,8 @@ static void __devinit skge_show_addr(struct net_device *dev)
 	netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr);
 }
 
+static int only_32bit_dma;
+
 static int __devinit skge_probe(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
@@ -3889,7 +3892,7 @@ static int __devinit skge_probe(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
+	if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
 		using_dac = 1;
 		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
 	} else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
@@ -4147,8 +4150,21 @@ static struct pci_driver skge_driver = {
 	.shutdown =	skge_shutdown,
 };
 
+static struct dmi_system_id skge_32bit_dma_boards[] = {
+	{
+		.ident = "Gigabyte nForce boards",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"),
+			DMI_MATCH(DMI_BOARD_NAME, "nForce"),
+		},
+	},
+	{}
+};
+
 static int __init skge_init_module(void)
 {
+	if (dmi_check_system(skge_32bit_dma_boards))
+		only_32bit_dma = 1;
 	skge_debug_init();
 	return pci_register_driver(&skge_driver);
 }

From 7c6d45e665d5322401e4439060bbf758b08422d4 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 6 Oct 2010 11:06:44 +1100
Subject: [PATCH 725/728] powerpc: remove unused variable

Since powerpc uses -Werror on arch powerpc, the build was broken like
this:

  cc1: warnings being treated as errors
  arch/powerpc/kernel/module.c: In function 'module_finalize':
  arch/powerpc/kernel/module.c:66: error: unused variable 'err'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/kernel/module.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 4ef93ae2235f..49cee9df225b 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -63,7 +63,6 @@ int module_finalize(const Elf_Ehdr *hdr,
 		const Elf_Shdr *sechdrs, struct module *me)
 {
 	const Elf_Shdr *sect;
-	int err;
 
 	/* Apply feature fixups */
 	sect = find_section(hdr, sechdrs, "__ftr_fixup");

From 27e6f065df132b5270014d3285889b15185e9da9 Mon Sep 17 00:00:00 2001
From: Neil Horman <nhorman@tuxdriver.com>
Date: Tue, 5 Oct 2010 03:39:21 +0000
Subject: [PATCH 726/728] bonding: fix WARN_ON when writing to bond_master
 sysfs file

Fix a WARN_ON failure in bond_masters sysfs file

Got a report of this warning recently

bonding: bond0 is being created...
------------[ cut here ]------------
WARNING: at fs/proc/generic.c:590 proc_register+0x14d/0x185()
Hardware name: ProLiant BL465c G1
proc_dir_entry 'bonding/bond0' already registered
Modules linked in: bonding ipv6 tg3 bnx2 shpchp amd64_edac_mod edac_core
ipmi_si
ipmi_msghandler serio_raw i2c_piix4 k8temp edac_mce_amd hpwdt microcode hpsa
cc
iss radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded:
scsi_wai
t_scan]
Pid: 935, comm: ifup-eth Not tainted 2.6.33.5-124.fc13.x86_64 #1
Call Trace:
[<ffffffff8104b54c>] warn_slowpath_common+0x77/0x8f
[<ffffffff8104b5b1>] warn_slowpath_fmt+0x3c/0x3e
[<ffffffff8114bf0b>] proc_register+0x14d/0x185
[<ffffffff8114c20c>] proc_create_data+0x87/0xa1
[<ffffffffa0211e9b>] bond_create_proc_entry+0x55/0x95 [bonding]
[<ffffffffa0215e5d>] bond_init+0x95/0xd0 [bonding]
[<ffffffff8138cd97>] register_netdevice+0xdd/0x29e
[<ffffffffa021240b>] bond_create+0x8e/0xb8 [bonding]
[<ffffffffa021c4be>] bonding_store_bonds+0xb3/0x1c1 [bonding]
[<ffffffff812aec85>] class_attr_store+0x27/0x29
[<ffffffff8115423d>] sysfs_write_file+0x10f/0x14b
[<ffffffff81101acf>] vfs_write+0xa9/0x106
[<ffffffff81101be2>] sys_write+0x45/0x69
[<ffffffff81009b02>] system_call_fastpath+0x16/0x1b
---[ end trace a677c3f7f8b16b1e ]---
bonding: Bond creation failed.

It happens because a user space writer to bond_master can try to
register an already existing bond interface name.  Fix it by teaching
bond_create to check for the existance of devices with that name first
in cases where a non-NULL name parameter has been passed in

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bonding/bond_main.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 3b16f62d5606..e953c6ad6e6d 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -5164,6 +5164,15 @@ int bond_create(struct net *net, const char *name)
 		res = dev_alloc_name(bond_dev, "bond%d");
 		if (res < 0)
 			goto out;
+	} else {
+		/*
+		 * If we're given a name to register
+		 * we need to ensure that its not already
+		 * registered
+		 */
+		res = -EEXIST;
+		if (__dev_get_by_name(net, name) != NULL)
+			goto out;
 	}
 
 	res = register_netdevice(bond_dev);

From 79315068f4560f3f7bd6e9790190dcb43059770c Mon Sep 17 00:00:00 2001
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Mon, 4 Oct 2010 22:42:08 +0000
Subject: [PATCH 727/728] caif: fix two caif_connect() bugs

caif_connect() might dereference a netdevice after dev_put() it.

It also doesnt check dev_get_by_index() return value and could
dereference a NULL pointer.

Fix it, using RCU to avoid taking a reference.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/caif/caif_socket.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c
index 8ce904786116..4bf28f25f368 100644
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -827,6 +827,7 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 	long timeo;
 	int err;
 	int ifindex, headroom, tailroom;
+	unsigned int mtu;
 	struct net_device *dev;
 
 	lock_sock(sk);
@@ -896,15 +897,23 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr,
 		cf_sk->sk.sk_state = CAIF_DISCONNECTED;
 		goto out;
 	}
-	dev = dev_get_by_index(sock_net(sk), ifindex);
+
+	err = -ENODEV;
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), ifindex);
+	if (!dev) {
+		rcu_read_unlock();
+		goto out;
+	}
 	cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom);
+	mtu = dev->mtu;
+	rcu_read_unlock();
+
 	cf_sk->tailroom = tailroom;
-	cf_sk->maxframe = dev->mtu - (headroom + tailroom);
-	dev_put(dev);
+	cf_sk->maxframe = mtu - (headroom + tailroom);
 	if (cf_sk->maxframe < 1) {
-		pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n",
-			__func__, dev->mtu);
-		err = -ENODEV;
+		pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n",
+			   __func__, mtu);
 		goto out;
 	}
 

From cb655d0f3d57c23db51b981648e452988c0223f9 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 6 Oct 2010 13:39:52 -0700
Subject: [PATCH 728/728] Linux 2.6.36-rc7

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 471c49fd2f43..77b5c6ed0ce5 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 36
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*