hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'mfd/wm8994' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3

This commit is contained in:
Mark Brown 2011-12-13 00:19:20 +08:00
parent 0604ca48f1 8ab3069182
commit 68556ca1e0
727 changed files with 9361 additions and 6394 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.mailmap
View File

@ -68,6 +68,7 @@ Juha Yrjola <juha.yrjola@solidboot.com>
Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Koushik <raghavendra.koushik@neterion.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
Mark Brown <broonie@sirena.org.uk>
@ -111,3 +112,4 @@ Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>

13
Documentation/ABI/testing/sysfs-block
View File

@ -206,16 +206,3 @@ Description:
when a discarded area is read the discard_zeroes_data
parameter will be set to one. Otherwise it will be 0 and
the result of reading a discarded area is undefined.
What: /sys/block/<disk>/alias
Date: Aug 2011
Contact: Nao Nishijima <nao.nishijima.xt@hitachi.com>
Description:
A raw device name of a disk does not always point a same disk
each boot-up time. Therefore, users have to use persistent
device names, which udev creates when the kernel finds a disk,
instead of raw device name. However, kernel doesn't show those
persistent names on its messages (e.g. dmesg).
This file can store an alias of the disk and it would be
appeared in kernel messages if it is set. A disk can have an
alias which length is up to 255bytes. Users can use alphabets,
numbers, "-" and "_" in alias name. This file is writeonce.

308
Documentation/DocBook/drm.tmpl
View File

@ -32,7 +32,7 @@
The Linux DRM layer contains code intended to support the needs
of complex graphics devices, usually containing programmable
pipelines well suited to 3D graphics acceleration. Graphics
drivers in the kernel can make use of DRM functions to make
drivers in the kernel may make use of DRM functions to make
tasks like memory management, interrupt handling and DMA easier,
and provide a uniform interface to applications.
</para>
@ -57,10 +57,10 @@
existing drivers.
</para>
<para>
First, we'll go over some typical driver initialization
First, we go over some typical driver initialization
requirements, like setting up command buffers, creating an
initial output configuration, and initializing core services.
Subsequent sections will cover core internals in more detail,
Subsequent sections cover core internals in more detail,
providing implementation notes and examples.
</para>
<para>
@ -74,7 +74,7 @@
</para>
<para>
The core of every DRM driver is struct drm_driver. Drivers
will typically statically initialize a drm_driver structure,
typically statically initialize a drm_driver structure,
then pass it to drm_init() at load time.
</para>
@ -88,8 +88,8 @@
</para>
<programlisting>
static struct drm_driver driver = {
/* don't use mtrr's here, the Xserver or user space app should
* deal with them for intel hardware.
/* Don't use MTRRs here; the Xserver or userspace app should
* deal with them for Intel hardware.
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP |
@ -154,8 +154,8 @@
</programlisting>
<para>
In the example above, taken from the i915 DRM driver, the driver
sets several flags indicating what core features it supports.
We'll go over the individual callbacks in later sections. Since
sets several flags indicating what core features it supports;
we go over the individual callbacks in later sections. Since
flags indicate which features your driver supports to the DRM
core, you need to set most of them prior to calling drm_init(). Some,
like DRIVER_MODESET can be set later based on user supplied parameters,
@ -203,8 +203,8 @@
<term>DRIVER_HAVE_IRQ</term><term>DRIVER_IRQ_SHARED</term>
<listitem>
<para>
DRIVER_HAVE_IRQ indicates whether the driver has a IRQ
handler, DRIVER_IRQ_SHARED indicates whether the device &amp;
DRIVER_HAVE_IRQ indicates whether the driver has an IRQ
handler. DRIVER_IRQ_SHARED indicates whether the device &amp;
handler support shared IRQs (note that this is required of
PCI drivers).
</para>
@ -214,8 +214,8 @@
<term>DRIVER_DMA_QUEUE</term>
<listitem>
<para>
If the driver queues DMA requests and completes them
asynchronously, this flag should be set. Deprecated.
Should be set if the driver queues DMA requests and completes them
asynchronously. Deprecated.
</para>
</listitem>
</varlistentry>
@ -238,7 +238,7 @@
</variablelist>
<para>
In this specific case, the driver requires AGP and supports
IRQs. DMA, as we'll see, is handled by device specific ioctls
IRQs. DMA, as discussed later, is handled by device-specific ioctls
in this case. It also supports the kernel mode setting APIs, though
unlike in the actual i915 driver source, this example unconditionally
exports KMS capability.
@ -269,36 +269,34 @@
initial output configuration.
</para>
<para>
Note that the tasks performed at driver load time must not
conflict with DRM client requirements. For instance, if user
If compatibility is a concern (e.g. with drivers converted over
to the new interfaces from the old ones), care must be taken to
prevent device initialization and control that is incompatible with
currently active userspace drivers. For instance, if user
level mode setting drivers are in use, it would be problematic
to perform output discovery &amp; configuration at load time.
Likewise, if pre-memory management aware user level drivers are
Likewise, if user-level drivers unaware of memory management are
in use, memory management and command buffer setup may need to
be omitted. These requirements are driver specific, and care
be omitted. These requirements are driver-specific, and care
needs to be taken to keep both old and new applications and
libraries working. The i915 driver supports the "modeset"
module parameter to control whether advanced features are
enabled at load time or in legacy fashion. If compatibility is
a concern (e.g. with drivers converted over to the new interfaces
from the old ones), care must be taken to prevent incompatible
device initialization and control with the currently active
userspace drivers.
enabled at load time or in legacy fashion.
</para>
<sect2>
<title>Driver private &amp; performance counters</title>
<para>
The driver private hangs off the main drm_device structure and
can be used for tracking various device specific bits of
can be used for tracking various device-specific bits of
information, like register offsets, command buffer status,
register state for suspend/resume, etc. At load time, a
driver can simply allocate one and set drm_device.dev_priv
appropriately; at unload the driver can free it and set
drm_device.dev_priv to NULL.
driver may simply allocate one and set drm_device.dev_priv
appropriately; it should be freed and drm_device.dev_priv set
to NULL when the driver is unloaded.
</para>
<para>
The DRM supports several counters which can be used for rough
The DRM supports several counters which may be used for rough
performance characterization. Note that the DRM stat counter
system is not often used by applications, and supporting
additional counters is completely optional.
@ -307,15 +305,15 @@
These interfaces are deprecated and should not be used. If performance
monitoring is desired, the developer should investigate and
potentially enhance the kernel perf and tracing infrastructure to export
GPU related performance information to performance monitoring
tools and applications.
GPU related performance information for consumption by performance
monitoring tools and applications.
</para>
</sect2>
<sect2>
<title>Configuring the device</title>
<para>
Obviously, device configuration will be device specific.
Obviously, device configuration is device-specific.
However, there are several common operations: finding a
device's PCI resources, mapping them, and potentially setting
up an IRQ handler.
@ -323,10 +321,10 @@
<para>
Finding &amp; mapping resources is fairly straightforward. The
DRM wrapper functions, drm_get_resource_start() and
drm_get_resource_len() can be used to find BARs on the given
drm_get_resource_len(), may be used to find BARs on the given
drm_device struct. Once those values have been retrieved, the
driver load function can call drm_addmap() to create a new
mapping for the BAR in question. Note you'll probably want a
mapping for the BAR in question. Note that you probably want a
drm_local_map_t in your driver private structure to track any
mappings you create.
<!-- !Fdrivers/gpu/drm/drm_bufs.c drm_get_resource_* -->
@ -335,20 +333,20 @@
<para>
if compatibility with other operating systems isn't a concern
(DRM drivers can run under various BSD variants and OpenSolaris),
native Linux calls can be used for the above, e.g. pci_resource_*
native Linux calls may be used for the above, e.g. pci_resource_*
and iomap*/iounmap. See the Linux device driver book for more
info.
</para>
<para>
Once you have a register map, you can use the DRM_READn() and
Once you have a register map, you may use the DRM_READn() and
DRM_WRITEn() macros to access the registers on your device, or
use driver specific versions to offset into your MMIO space
relative to a driver specific base pointer (see I915_READ for
example).
use driver-specific versions to offset into your MMIO space
relative to a driver-specific base pointer (see I915_READ for
an example).
</para>
<para>
If your device supports interrupt generation, you may want to
setup an interrupt handler at driver load time as well. This
set up an interrupt handler when the driver is loaded. This
is done using the drm_irq_install() function. If your device
supports vertical blank interrupts, it should call
drm_vblank_init() to initialize the core vblank handling code before
@ -357,7 +355,7 @@
</para>
<!--!Fdrivers/char/drm/drm_irq.c drm_irq_install-->
<para>
Once your interrupt handler is registered (it'll use your
Once your interrupt handler is registered (it uses your
drm_driver.irq_handler as the actual interrupt handling
function), you can safely enable interrupts on your device,
assuming any other state your interrupt handler uses is also
@ -371,10 +369,10 @@
using the pci_map_rom() call, a convenience function that
takes care of mapping the actual ROM, whether it has been
shadowed into memory (typically at address 0xc0000) or exists
on the PCI device in the ROM BAR. Note that once you've
mapped the ROM and extracted any necessary information, be
sure to unmap it; on many devices the ROM address decoder is
shared with other BARs, so leaving it mapped can cause
on the PCI device in the ROM BAR. Note that after the ROM
has been mapped and any necessary information has been extracted,
it should be unmapped; on many devices, the ROM address decoder is
shared with other BARs, so leaving it mapped could cause
undesired behavior like hangs or memory corruption.
<!--!Fdrivers/pci/rom.c pci_map_rom-->
</para>
@ -389,9 +387,9 @@
should support a memory manager.
</para>
<para>
If your driver supports memory management (it should!), you'll
If your driver supports memory management (it should!), you
need to set that up at load time as well. How you initialize
it depends on which memory manager you're using, TTM or GEM.
it depends on which memory manager you're using: TTM or GEM.
</para>
<sect3>
<title>TTM initialization</title>
@ -401,7 +399,7 @@
and devices with dedicated video RAM (VRAM), i.e. most discrete
graphics devices. If your device has dedicated RAM, supporting
TTM is desirable. TTM also integrates tightly with your
driver specific buffer execution function. See the radeon
driver-specific buffer execution function. See the radeon
driver for examples.
</para>
<para>
@ -429,21 +427,21 @@
created by the memory manager at runtime. Your global TTM should
have a type of TTM_GLOBAL_TTM_MEM. The size field for the global
object should be sizeof(struct ttm_mem_global), and the init and
release hooks should point at your driver specific init and
release routines, which will probably eventually call
ttm_mem_global_init and ttm_mem_global_release respectively.
release hooks should point at your driver-specific init and
release routines, which probably eventually call
ttm_mem_global_init and ttm_mem_global_release, respectively.
</para>
<para>
Once your global TTM accounting structure is set up and initialized
(done by calling ttm_global_item_ref on the global object you
just created), you'll need to create a buffer object TTM to
by calling ttm_global_item_ref() on it,
you need to create a buffer object TTM to
provide a pool for buffer object allocation by clients and the
kernel itself. The type of this object should be TTM_GLOBAL_TTM_BO,
and its size should be sizeof(struct ttm_bo_global). Again,
driver specific init and release functions can be provided,
likely eventually calling ttm_bo_global_init and
ttm_bo_global_release, respectively. Also like the previous
object, ttm_global_item_ref is used to create an initial reference
driver-specific init and release functions may be provided,
likely eventually calling ttm_bo_global_init() and
ttm_bo_global_release(), respectively. Also, like the previous
object, ttm_global_item_ref() is used to create an initial reference
count for the TTM, which will call your initialization function.
</para>
</sect3>
@ -453,27 +451,26 @@
GEM is an alternative to TTM, designed specifically for UMA
devices. It has simpler initialization and execution requirements
than TTM, but has no VRAM management capability. Core GEM
initialization is comprised of a basic drm_mm_init call to create
is initialized by calling drm_mm_init() to create
a GTT DRM MM object, which provides an address space pool for
object allocation. In a KMS configuration, the driver will
need to allocate and initialize a command ring buffer following
basic GEM initialization. Most UMA devices have a so-called
object allocation. In a KMS configuration, the driver
needs to allocate and initialize a command ring buffer following
core GEM initialization. A UMA device usually has what is called a
"stolen" memory region, which provides space for the initial
framebuffer and large, contiguous memory regions required by the
device. This space is not typically managed by GEM, and must
device. This space is not typically managed by GEM, and it must
be initialized separately into its own DRM MM object.
</para>
<para>
Initialization will be driver specific, and will depend on
the architecture of the device. In the case of Intel
Initialization is driver-specific. In the case of Intel
integrated graphics chips like 965GM, GEM initialization can
be done by calling the internal GEM init function,
i915_gem_do_init(). Since the 965GM is a UMA device
(i.e. it doesn't have dedicated VRAM), GEM will manage
(i.e. it doesn't have dedicated VRAM), GEM manages
making regular RAM available for GPU operations. Memory set
aside by the BIOS (called "stolen" memory by the i915
driver) will be managed by the DRM memrange allocator; the
rest of the aperture will be managed by GEM.
driver) is managed by the DRM memrange allocator; the
rest of the aperture is managed by GEM.
<programlisting>
/* Basic memrange allocator for stolen space (aka vram) */
drm_memrange_init(&amp;dev_priv->vram, 0, prealloc_size);
@ -483,7 +480,7 @@
<!--!Edrivers/char/drm/drm_memrange.c-->
</para>
<para>
Once the memory manager has been set up, we can allocate the
Once the memory manager has been set up, we may allocate the
command buffer. In the i915 case, this is also done with a
GEM function, i915_gem_init_ringbuffer().
</para>
@ -493,16 +490,25 @@
<sect2>
<title>Output configuration</title>
<para>
The final initialization task is output configuration. This involves
finding and initializing the CRTCs, encoders and connectors
for your device, creating an initial configuration and
registering a framebuffer console driver.
The final initialization task is output configuration. This involves:
<itemizedlist>
<listitem>
Finding and initializing the CRTCs, encoders, and connectors
for the device.
</listitem>
<listitem>
Creating an initial configuration.
</listitem>
<listitem>
Registering a framebuffer console driver.
</listitem>
</itemizedlist>
</para>
<sect3>
<title>Output discovery and initialization</title>
<para>
Several core functions exist to create CRTCs, encoders and
connectors, namely drm_crtc_init(), drm_connector_init() and
Several core functions exist to create CRTCs, encoders, and
connectors, namely: drm_crtc_init(), drm_connector_init(), and
drm_encoder_init(), along with several "helper" functions to
perform common tasks.
</para>
@ -555,10 +561,10 @@ void intel_crt_init(struct drm_device *dev)
</programlisting>
<para>
In the example above (again, taken from the i915 driver), a
CRT connector and encoder combination is created. A device
specific i2c bus is also created, for fetching EDID data and
CRT connector and encoder combination is created. A device-specific
i2c bus is also created for fetching EDID data and
performing monitor detection. Once the process is complete,
the new connector is registered with sysfs, to make its
the new connector is registered with sysfs to make its
properties available to applications.
</para>
<sect4>
@ -567,12 +573,12 @@ void intel_crt_init(struct drm_device *dev)
Since many PC-class graphics devices have similar display output
designs, the DRM provides a set of helper functions to make
output management easier. The core helper routines handle
encoder re-routing and disabling of unused functions following
mode set. Using the helpers is optional, but recommended for
encoder re-routing and the disabling of unused functions following
mode setting. Using the helpers is optional, but recommended for
devices with PC-style architectures (i.e. a set of display planes
for feeding pixels to encoders which are in turn routed to
connectors). Devices with more complex requirements needing
finer grained management can opt to use the core callbacks
finer grained management may opt to use the core callbacks
directly.
</para>
<para>
@ -580,17 +586,25 @@ void intel_crt_init(struct drm_device *dev)
</para>
</sect4>
<para>
For each encoder, CRTC and connector, several functions must
be provided, depending on the object type. Encoder objects
need to provide a DPMS (basically on/off) function, mode fixup
(for converting requested modes into native hardware timings),
and prepare, set and commit functions for use by the core DRM
helper functions. Connector helpers need to provide mode fetch and
validity functions as well as an encoder matching function for
returning an ideal encoder for a given connector. The core
connector functions include a DPMS callback, (deprecated)
save/restore routines, detection, mode probing, property handling,
and cleanup functions.
Each encoder object needs to provide:
<itemizedlist>
<listitem>
A DPMS (basically on/off) function.
</listitem>
<listitem>
A mode-fixup function (for converting requested modes into
native hardware timings).
</listitem>
<listitem>
Functions (prepare, set, and commit) for use by the core DRM
helper functions.
</listitem>
</itemizedlist>
Connector helpers need to provide functions (mode-fetch, validity,
and encoder-matching) for returning an ideal encoder for a given
connector. The core connector functions include a DPMS callback,
save/restore routines (deprecated), detection, mode probing,
property handling, and cleanup functions.
</para>
<!--!Edrivers/char/drm/drm_crtc.h-->
<!--!Edrivers/char/drm/drm_crtc.c-->
@ -605,22 +619,33 @@ void intel_crt_init(struct drm_device *dev)
<title>VBlank event handling</title>
<para>
The DRM core exposes two vertical blank related ioctls:
DRM_IOCTL_WAIT_VBLANK and DRM_IOCTL_MODESET_CTL.
<variablelist>
<varlistentry>
<term>DRM_IOCTL_WAIT_VBLANK</term>
<listitem>
<para>
This takes a struct drm_wait_vblank structure as its argument,
and it is used to block or request a signal when a specified
vblank event occurs.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>DRM_IOCTL_MODESET_CTL</term>
<listitem>
<para>
This should be called by application level drivers before and
after mode setting, since on many devices the vertical blank
counter is reset at that time. Internally, the DRM snapshots
the last vblank count when the ioctl is called with the
_DRM_PRE_MODESET command, so that the counter won't go backwards
(which is dealt with when _DRM_POST_MODESET is used).
</para>
</listitem>
</varlistentry>
</variablelist>
<!--!Edrivers/char/drm/drm_irq.c-->
</para>
<para>
DRM_IOCTL_WAIT_VBLANK takes a struct drm_wait_vblank structure
as its argument, and is used to block or request a signal when a
specified vblank event occurs.
</para>
<para>
DRM_IOCTL_MODESET_CTL should be called by application level
drivers before and after mode setting, since on many devices the
vertical blank counter will be reset at that time. Internally,
the DRM snapshots the last vblank count when the ioctl is called
with the _DRM_PRE_MODESET command so that the counter won't go
backwards (which is dealt with when _DRM_POST_MODESET is used).
</para>
<para>
To support the functions above, the DRM core provides several
helper functions for tracking vertical blank counters, and
@ -632,24 +657,24 @@ void intel_crt_init(struct drm_device *dev)
register. The enable and disable vblank callbacks should enable
and disable vertical blank interrupts, respectively. In the
absence of DRM clients waiting on vblank events, the core DRM
code will use the disable_vblank() function to disable
interrupts, which saves power. They'll be re-enabled again when
code uses the disable_vblank() function to disable
interrupts, which saves power. They are re-enabled again when
a client calls the vblank wait ioctl above.
</para>
<para>
Devices that don't provide a count register can simply use an
A device that doesn't provide a count register may simply use an
internal atomic counter incremented on every vertical blank
interrupt, and can make their enable and disable vblank
functions into no-ops.
interrupt (and then treat the enable_vblank() and disable_vblank()
callbacks as no-ops).
</para>
</sect1>
<sect1>
<title>Memory management</title>
<para>
The memory manager lies at the heart of many DRM operations, and
is also required to support advanced client features like OpenGL
pbuffers. The DRM currently contains two memory managers, TTM
The memory manager lies at the heart of many DRM operations; it
is required to support advanced client features like OpenGL
pbuffers. The DRM currently contains two memory managers: TTM
and GEM.
</para>
@ -679,41 +704,46 @@ void intel_crt_init(struct drm_device *dev)
<para>
GEM-enabled drivers must provide gem_init_object() and
gem_free_object() callbacks to support the core memory
allocation routines. They should also provide several driver
specific ioctls to support command execution, pinning, buffer
allocation routines. They should also provide several driver-specific
ioctls to support command execution, pinning, buffer
read &amp; write, mapping, and domain ownership transfers.
</para>
<para>
On a fundamental level, GEM involves several operations: memory
allocation and freeing, command execution, and aperture management
at command execution time. Buffer object allocation is relatively
On a fundamental level, GEM involves several operations:
<itemizedlist>
<listitem>Memory allocation and freeing</listitem>
<listitem>Command execution</listitem>
<listitem>Aperture management at command execution time</listitem>
</itemizedlist>
Buffer object allocation is relatively
straightforward and largely provided by Linux's shmem layer, which
provides memory to back each object. When mapped into the GTT
or used in a command buffer, the backing pages for an object are
flushed to memory and marked write combined so as to be coherent
with the GPU. Likewise, when the GPU finishes rendering to an object,
if the CPU accesses it, it must be made coherent with the CPU's view
with the GPU. Likewise, if the CPU accesses an object after the GPU
has finished rendering to the object, then the object must be made
coherent with the CPU's view
of memory, usually involving GPU cache flushing of various kinds.
This core CPU&lt;-&gt;GPU coherency management is provided by the GEM
set domain function, which evaluates an object's current domain and
This core CPU&lt;-&gt;GPU coherency management is provided by a
device-specific ioctl, which evaluates an object's current domain and
performs any necessary flushing or synchronization to put the object
into the desired coherency domain (note that the object may be busy,
i.e. an active render target; in that case the set domain function
will block the client and wait for rendering to complete before
i.e. an active render target; in that case, setting the domain
blocks the client and waits for rendering to complete before
performing any necessary flushing operations).
</para>
<para>
Perhaps the most important GEM function is providing a command
execution interface to clients. Client programs construct command
buffers containing references to previously allocated memory objects
and submit them to GEM. At that point, GEM will take care to bind
buffers containing references to previously allocated memory objects,
and then submit them to GEM. At that point, GEM takes care to bind
all the objects into the GTT, execute the buffer, and provide
necessary synchronization between clients accessing the same buffers.
This often involves evicting some objects from the GTT and re-binding
others (a fairly expensive operation), and providing relocation
support which hides fixed GTT offsets from clients. Clients must
take care not to submit command buffers that reference more objects
than can fit in the GTT or GEM will reject them and no rendering
than can fit in the GTT; otherwise, GEM will reject them and no rendering
will occur. Similarly, if several objects in the buffer require
fence registers to be allocated for correct rendering (e.g. 2D blits
on pre-965 chips), care must be taken not to require more fence
@ -729,7 +759,7 @@ void intel_crt_init(struct drm_device *dev)
<title>Output management</title>
<para>
At the core of the DRM output management code is a set of
structures representing CRTCs, encoders and connectors.
structures representing CRTCs, encoders, and connectors.
</para>
<para>
A CRTC is an abstraction representing a part of the chip that
@ -765,21 +795,19 @@ void intel_crt_init(struct drm_device *dev)
<sect1>
<title>Framebuffer management</title>
<para>
In order to set a mode on a given CRTC, encoder and connector
configuration, clients need to provide a framebuffer object which
will provide a source of pixels for the CRTC to deliver to the encoder(s)
and ultimately the connector(s) in the configuration. A framebuffer
is fundamentally a driver specific memory object, made into an opaque
handle by the DRM addfb function. Once an fb has been created this
way it can be passed to the KMS mode setting routines for use in
a configuration.
Clients need to provide a framebuffer object which provides a source
of pixels for a CRTC to deliver to the encoder(s) and ultimately the
connector(s). A framebuffer is fundamentally a driver-specific memory
object, made into an opaque handle by the DRM's addfb() function.
Once a framebuffer has been created this way, it may be passed to the
KMS mode setting routines for use in a completed configuration.
</para>
</sect1>
<sect1>
<title>Command submission &amp; fencing</title>
<para>
This should cover a few device specific command submission
This should cover a few device-specific command submission
implementations.
</para>
</sect1>
@ -789,7 +817,7 @@ void intel_crt_init(struct drm_device *dev)
<para>
The DRM core provides some suspend/resume code, but drivers
wanting full suspend/resume support should provide save() and
restore() functions. These will be called at suspend,
restore() functions. These are called at suspend,
hibernate, or resume time, and should perform any state save or
restore required by your device across suspend or hibernate
states.
@ -812,8 +840,8 @@ void intel_crt_init(struct drm_device *dev)
<para>
The DRM core exports several interfaces to applications,
generally intended to be used through corresponding libdrm
wrapper functions. In addition, drivers export device specific
interfaces for use by userspace drivers &amp; device aware
wrapper functions. In addition, drivers export device-specific
interfaces for use by userspace drivers &amp; device-aware
applications through ioctls and sysfs files.
</para>
<para>
@ -822,8 +850,8 @@ void intel_crt_init(struct drm_device *dev)
management, memory management, and output management.
</para>
<para>
Cover generic ioctls and sysfs layout here. Only need high
level info, since man pages will cover the rest.
Cover generic ioctls and sysfs layout here. We only need high-level
info, since man pages should cover the rest.
</para>
</chapter>

7
Documentation/DocBook/uio-howto.tmpl
View File

@ -520,6 +520,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
</para>
<itemizedlist>
<listitem><para>
<varname>const char *name</varname>: Optional. Set this to help identify
the memory region, it will show up in the corresponding sysfs node.
</para></listitem>
<listitem><para>
<varname>int memtype</varname>: Required if the mapping is used. Set this to
<varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
@ -553,7 +558,7 @@ instead to remember such an address.
</itemizedlist>
<para>
Please do not touch the <varname>kobj</varname> element of
Please do not touch the <varname>map</varname> element of
<varname>struct uio_mem</varname>! It is used by the UIO framework
to set up sysfs files for this mapping. Simply leave it alone.
</para>

14
Documentation/blockdev/cciss.txt
View File

@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
"SCSI support" in your kernel configuration to be able to use SCSI
tape drives with your Smart Array 5xxx controller.
Additionally, note that the driver will not engage the SCSI core at init
time. The driver must be directed to dynamically engage the SCSI core via
the /proc filesystem entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is because at driver init time,
the SCSI core may not yet be initialized (because the driver is a block
driver) and attempting to register it with the SCSI core in such a case
would cause a hang. This is best done via an initialization script
(typically in /etc/init.d, but could vary depending on distribution).
Additionally, note that the driver will engage the SCSI core at init
time if any tape drives or medium changers are detected. The driver may
also be directed to dynamically engage the SCSI core via the /proc filesystem
entry which the "block" side of the driver creates as
/proc/driver/cciss/cciss* at runtime. This is best done via a script.
For example:
for x in /proc/driver/cciss/cciss[0-9]*

4
Documentation/cgroups/freezer-subsystem.txt
View File

@ -33,9 +33,9 @@ demonstrate this problem using nested bash shells:
From a second, unrelated bash shell:
$ kill -SIGSTOP 16690
$ kill -SIGCONT 16990
$ kill -SIGCONT 16690
<at this point 16990 exits and causes 16644 to exit too>
<at this point 16690 exits and causes 16644 to exit too>
This happens because bash can observe both signals and choose how it
responds to them.

18
Documentation/devicetree/bindings/sound/wm8994.txt Normal file
View File

@ -0,0 +1,18 @@
WM1811/WM8994/WM8958 audio CODEC
These devices support both I2C and SPI (configured with pin strapping
on the board).
Required properties:
- compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
- reg : the I2C address of the device for I2C, the chip select
number for SPI.
Example:
codec: wm8994@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;
};

36
Documentation/i2c/ten-bit-addresses
View File

@ -1,22 +1,24 @@
The I2C protocol knows about two kinds of device addresses: normal 7 bit
addresses, and an extended set of 10 bit addresses. The sets of addresses
do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
address 0x10 (though a single device could respond to both of them). You
select a 10 bit address by adding an extra byte after the address
byte:
S Addr7 Rd/Wr ....
becomes
S 11110 Addr10 Rd/Wr
S is the start bit, Rd/Wr the read/write bit, and if you count the number
of bits, you will see the there are 8 after the S bit for 7 bit addresses,
and 16 after the S bit for 10 bit addresses.
address 0x10 (though a single device could respond to both of them).
WARNING! The current 10 bit address support is EXPERIMENTAL. There are
several places in the code that will cause SEVERE PROBLEMS with 10 bit
addresses, even though there is some basic handling and hooks. Also,
almost no supported adapter handles the 10 bit addresses correctly.
I2C messages to and from 10-bit address devices have a different format.
See the I2C specification for the details.
As soon as a real 10 bit address device is spotted 'in the wild', we
can and will add proper support. Right now, 10 bit address devices
are defined by the I2C protocol, but we have never seen a single device
which supports them.
The current 10 bit address support is minimal. It should work, however
you can expect some problems along the way:
* Not all bus drivers support 10-bit addresses. Some don't because the
hardware doesn't support them (SMBus doesn't require 10-bit address
support for example), some don't because nobody bothered adding the
code (or it's there but not working properly.) Software implementation
(i2c-algo-bit) is known to work.
* Some optional features do not support 10-bit addresses. This is the
case of automatic detection and instantiation of devices by their,
drivers, for example.
* Many user-space packages (for example i2c-tools) lack support for
10-bit addresses.
Note that 10-bit address devices are still pretty rare, so the limitations
listed above could stay for a long time, maybe even forever if nobody
needs them to be fixed.

2
Documentation/networking/ip-sysctl.txt
View File

@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN
default FALSE
min_pmtu - INTEGER
default 562 - minimum discovered Path MTU
default 552 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase

14
Documentation/serial/serial-rs485.txt
View File

@ -97,15 +97,23 @@
struct serial_rs485 rs485conf;
/* Set RS485 mode: */
/* Enable RS485 mode: */
rs485conf.flags |= SER_RS485_ENABLED;
/* Set logical level for RTS pin equal to 1 when sending: */
rs485conf.flags |= SER_RS485_RTS_ON_SEND;
/* or, set logical level for RTS pin equal to 0 when sending: */
rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
/* Set logical level for RTS pin equal to 1 after sending: */
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
/* or, set logical level for RTS pin equal to 0 after sending: */
rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
/* Set rts delay before send, if needed: */
rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
rs485conf.delay_rts_before_send = ...;
/* Set rts delay after send, if needed: */
rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
rs485conf.delay_rts_after_send = ...;
/* Set this flag if you want to receive data even whilst sending data */

1
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -349,6 +349,7 @@ STAC92HD83*
ref Reference board
mic-ref Reference board with power management for ports
dell-s14 Dell laptop
dell-vostro-3500 Dell Vostro 3500 laptop
hp HP laptops with (inverted) mute-LED
hp-dv7-4000 HP dv-7 4000
auto BIOS setup (default)

8
Documentation/sound/alsa/HD-Audio.txt
View File

@ -579,7 +579,7 @@ Development Tree
~~~~~~~~~~~~~~~~
The latest development codes for HD-audio are found on sound git tree:
- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
The master branch or for-next branches can be used as the main
development branches in general while the HD-audio specific patches
@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make
install(-modules). See INSTALL in the package. The snapshot tarballs
are found at:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
Sending a Bug Report
@ -696,7 +696,7 @@ via hda-verb won't change the mixer value.
The hda-verb program is found in the ftp directory:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
- ftp://ftp.suse.com/pub/people/tiwai/misc/
Also a git repository is available:
@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc.
The package is found in:
- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
- ftp://ftp.suse.com/pub/people/tiwai/misc/
A git repository is available:

2
Kbuild
View File

@ -92,7 +92,7 @@ always += missing-syscalls
targets += missing-syscalls
quiet_cmd_syscalls = CALL $<
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags)
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
$(call cmd,syscalls)

38
MAINTAINERS
View File

@ -1107,6 +1107,7 @@ F: drivers/media/video/s5p-fimc/
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
M: Kyungmin Park <kyungmin.park@samsung.com>
M: Kamil Debski <k.debski@samsung.com>
M: Jeongtae Park <jtp.park@samsung.com>
L: linux-arm-kernel@lists.infradead.org
L: linux-media@vger.kernel.org
S: Maintained
@ -1789,6 +1790,14 @@ F: include/net/cfg80211.h
F: net/wireless/*
X: net/wireless/wext*
CHAR and MISC DRIVERS
M: Arnd Bergmann <arnd@arndb.de>
M: Greg Kroah-Hartman <greg@kroah.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
S: Maintained
F: drivers/char/*
F: drivers/misc/*
CHECKPATCH
M: Andy Whitcroft <apw@canonical.com>
S: Supported
@ -1927,9 +1936,11 @@ S: Maintained
F: drivers/connector/
CONTROL GROUPS (CGROUPS)
M: Paul Menage <paul@paulmenage.org>
M: Tejun Heo <tj@kernel.org>
M: Li Zefan <lizf@cn.fujitsu.com>
L: containers@lists.linux-foundation.org
L: cgroups@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
S: Maintained
F: include/linux/cgroup*
F: kernel/cgroup*
@ -2343,6 +2354,13 @@ S: Supported
F: drivers/gpu/drm/i915
F: include/drm/i915*
DRM DRIVERS FOR EXYNOS
M: Inki Dae <inki.dae@samsung.com>
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/exynos
F: include/drm/exynos*
DSCC4 DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
@ -2577,7 +2595,7 @@ S: Maintained
F: drivers/net/ethernet/i825xx/eexpress.*
ETHERNET BRIDGE
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: bridge@lists.linux-foundation.org
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net:Bridge
@ -3711,7 +3729,7 @@ F: fs/jbd2/
F: include/linux/jbd2.h
JSM Neo PCI based serial card
M: Breno Leitao <leitao@linux.vnet.ibm.com>
M: Lucas Tavares <lucaskt@linux.vnet.ibm.com>
L: linux-serial@vger.kernel.org
S: Maintained
F: drivers/tty/serial/jsm/
@ -4297,6 +4315,7 @@ MEMORY RESOURCE CONTROLLER
M: Balbir Singh <bsingharora@gmail.com>
M: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
M: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
F: mm/memcontrol.c
@ -4330,7 +4349,7 @@ MIPS
M: Ralf Baechle <ralf@linux-mips.org>
L: linux-mips@linux-mips.org
W: http://www.linux-mips.org/
T: git git://git.linux-mips.org/pub/scm/linux.git
T: git git://git.linux-mips.org/pub/scm/ralf/linux.git
Q: http://patchwork.linux-mips.org/project/linux-mips/list/
S: Supported
F: Documentation/mips/
@ -4463,7 +4482,7 @@ S: Supported
F: drivers/infiniband/hw/nes/
NETEM NETWORK EMULATOR
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: netem@lists.linux-foundation.org
S: Maintained
F: net/sched/sch_netem.c
@ -4940,7 +4959,7 @@ F: drivers/char/ppdev.c
F: include/linux/ppdev.h
PARAVIRT_OPS INTERFACE
M: Jeremy Fitzhardinge <jeremy@xensource.com>
M: Jeremy Fitzhardinge <jeremy@goop.org>
M: Chris Wright <chrisw@sous-sol.org>
M: Alok Kataria <akataria@vmware.com>
M: Rusty Russell <rusty@rustcorp.com.au>
@ -5977,7 +5996,7 @@ S: Maintained
F: drivers/usb/misc/sisusbvga/
SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
M: Stephen Hemminger <shemminger@linux-foundation.org>
M: Stephen Hemminger <shemminger@vyatta.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/marvell/sk*
@ -7391,8 +7410,8 @@ S: Maintained
F: arch/x86/kernel/cpu/mcheck/*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
M: Jeremy Fitzhardinge <jeremy@goop.org>
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.linux-foundation.org
S: Supported
@ -7425,7 +7444,8 @@ F: drivers/xen/*swiotlb*
XFS FILESYSTEM
P: Silicon Graphics Inc
M: Alex Elder <aelder@sgi.com>
M: Ben Myers <bpm@sgi.com>
M: Alex Elder <elder@kernel.org>
M: xfs-masters@oss.sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc3
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

2
arch/arm/boot/Makefile
View File

@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
clean-files := *.dtb
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-C none -a $(LOADADDR) -e $(STARTADDR) \

3
arch/arm/boot/dts/tegra-ventana.dts
View File

@ -22,11 +22,10 @@
sdhci@c8000400 {
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 155 0>; /* gpio PT3 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
};
sdhci@c8000600 {
power-gpios = <&gpio 70 0>; /* gpio PI6 */
support-8bit;
};
};

2
arch/arm/include/asm/hardware/cache-l2x0.h
View File

@ -20,6 +20,8 @@
#ifndef __ASM_ARM_HARDWARE_L2X0_H
#define __ASM_ARM_HARDWARE_L2X0_H
#include <linux/errno.h>
#define L2X0_CACHE_ID 0x000
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100

1
arch/arm/include/asm/mach/arch.h
View File

@ -13,6 +13,7 @@
struct tag;
struct meminfo;
struct sys_timer;
struct pt_regs;
struct machine_desc {
unsigned int nr; /* architecture number */

2
arch/arm/include/asm/unistd.h
View File

@ -402,6 +402,8 @@
#define __NR_syncfs (__NR_SYSCALL_BASE+373)
#define __NR_sendmmsg (__NR_SYSCALL_BASE+374)
#define __NR_setns (__NR_SYSCALL_BASE+375)
#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376)
#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377)
/*
* The following SWIs are ARM private.

2
arch/arm/kernel/calls.S
View File

@ -385,6 +385,8 @@
CALL(sys_syncfs)
CALL(sys_sendmmsg)
/* 375 */ CALL(sys_setns)
CALL(sys_process_vm_readv)
CALL(sys_process_vm_writev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

2
arch/arm/kernel/head.S
View File

@ -360,7 +360,7 @@ __secondary_data:
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A

35
arch/arm/kernel/machine_kexec.c
View File

@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
int machine_kexec_prepare(struct kimage *image)
{
unsigned long page_list;
void *reboot_code_buffer;
page_list = image->head & PAGE_MASK;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
return 0;
}
@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
void machine_kexec(struct kimage *image)
{
unsigned long page_list;
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
page_list = image->head & PAGE_MASK;
/* we need both effective and real address here */
reboot_code_buffer_phys =
page_to_pfn(image->control_code_page) << PAGE_SHIFT;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
kexec_start_address = image->start;
kexec_indirection_page = page_list;
kexec_mach_type = machine_arch_type;
kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
/* copy our kernel relocation code to the control code page */
memcpy(reboot_code_buffer,
relocate_new_kernel, relocate_new_kernel_size);
flush_icache_range((unsigned long) reboot_code_buffer,
(unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
printk(KERN_INFO "Bye!\n");
if (kexec_reinit)

6
arch/arm/kernel/setup.c
View File

@ -461,8 +461,10 @@ static void __init setup_processor(void)
cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
proc_arch[cpu_architecture()], cr_alignment);
sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
list->arch_name, ENDIANNESS);
snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~HWCAP_THUMB;

7
arch/arm/mach-at91/at91cap9_devices.c
View File

@ -98,7 +98,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
@ -1021,8 +1021,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -1035,7 +1035,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

5
arch/arm/mach-at91/at91rm9200_devices.c
View File

@ -877,8 +877,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -891,7 +891,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

5
arch/arm/mach-at91/at91sam9260_devices.c
View File

@ -837,8 +837,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -851,7 +851,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

5
arch/arm/mach-at91/at91sam9261_devices.c
View File

@ -816,8 +816,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -830,7 +830,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

5
arch/arm/mach-at91/at91sam9263_devices.c
View File

@ -1196,8 +1196,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -1210,7 +1210,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

7
arch/arm/mach-at91/at91sam9g45_devices.c
View File

@ -197,7 +197,7 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
.start = AT91SAM9G45_UDPHS_FIFO,
@ -1332,8 +1332,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -1346,7 +1346,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0,
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

7
arch/arm/mach-at91/at91sam9rl_devices.c
View File

@ -75,7 +75,7 @@ void __init at91_add_device_hdmac(void) {}
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
static struct resource usba_udc_resources[] = {
[0] = {
@ -908,8 +908,8 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
#if defined(CONFIG_SERIAL_ATMEL)
static struct resource dbgu_resources[] = {
[0] = {
.start = AT91_VA_BASE_SYS + AT91_DBGU,
.end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.start = AT91_BASE_SYS + AT91_DBGU,
.end = AT91_BASE_SYS + AT91_DBGU + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -922,7 +922,6 @@ static struct resource dbgu_resources[] = {
static struct atmel_uart_data dbgu_data = {
.use_dma_tx = 0,
.use_dma_rx = 0, /* DBGU not capable of receive DMA */
.regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
};
static u64 dbgu_dmamask = DMA_BIT_MASK(32);

2
arch/arm/mach-at91/board-yl-9200.c
View File

@ -384,7 +384,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
#include <video/s1d13xxxfb.h>
static void __init yl9200_init_video(void)
static void yl9200_init_video(void)
{
/* NWAIT Signal */
at91_set_A_periph(AT91_PIN_PC6, 0);

2
arch/arm/mach-at91/include/mach/vmalloc.h
View File

@ -21,6 +21,8 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#include <mach/hardware.h>
#define VMALLOC_END (AT91_VIRT_BASE & PGDIR_MASK)
#endif

2
arch/arm/mach-bcmring/core.c
View File

@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
*/
bcmring_clocksource_init();
sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
}
struct sys_timer bcmring_timer = {

1
arch/arm/mach-bcmring/dma.c
View File

@ -36,6 +36,7 @@
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

34
arch/arm/mach-imx/Makefile.boot
View File

@ -1,22 +1,26 @@
zreladdr-$(CONFIG_ARCH_MX1) += 0x08008000
params_phys-$(CONFIG_ARCH_MX1) := 0x08000100
initrd_phys-$(CONFIG_ARCH_MX1) := 0x08800000
zreladdr-$(CONFIG_SOC_IMX1) += 0x08008000
params_phys-$(CONFIG_SOC_IMX1) := 0x08000100
initrd_phys-$(CONFIG_SOC_IMX1) := 0x08800000
zreladdr-$(CONFIG_MACH_MX21) += 0xC0008000
params_phys-$(CONFIG_MACH_MX21) := 0xC0000100
initrd_phys-$(CONFIG_MACH_MX21) := 0xC0800000
zreladdr-$(CONFIG_SOC_IMX21) += 0xC0008000
params_phys-$(CONFIG_SOC_IMX21) := 0xC0000100
initrd_phys-$(CONFIG_SOC_IMX21) := 0xC0800000
zreladdr-$(CONFIG_ARCH_MX25) += 0x80008000
params_phys-$(CONFIG_ARCH_MX25) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX25) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX25) += 0x80008000
params_phys-$(CONFIG_SOC_IMX25) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX25) := 0x80800000
zreladdr-$(CONFIG_MACH_MX27) += 0xA0008000
params_phys-$(CONFIG_MACH_MX27) := 0xA0000100
initrd_phys-$(CONFIG_MACH_MX27) := 0xA0800000
zreladdr-$(CONFIG_SOC_IMX27) += 0xA0008000
params_phys-$(CONFIG_SOC_IMX27) := 0xA0000100
initrd_phys-$(CONFIG_SOC_IMX27) := 0xA0800000
zreladdr-$(CONFIG_ARCH_MX3) += 0x80008000
params_phys-$(CONFIG_ARCH_MX3) := 0x80000100
initrd_phys-$(CONFIG_ARCH_MX3) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX31) += 0x80008000
params_phys-$(CONFIG_SOC_IMX31) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX31) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000
params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100

17
arch/arm/mach-imx/clock-imx6q.c
View File

@ -1139,7 +1139,7 @@ static int _clk_set_rate(struct clk *clk, unsigned long rate)
return -EINVAL;
max_div = ((d->bm_pred >> d->bp_pred) + 1) *
((d->bm_pred >> d->bp_pred) + 1);
((d->bm_podf >> d->bp_podf) + 1);
div = parent_rate / rate;
if (div == 0)
@ -2002,6 +2002,21 @@ int __init mx6q_clocks_init(void)
clk_set_rate(&asrc_serial_clk, 1500000);
clk_set_rate(&enfc_clk, 11000000);
/*
* Before pinctrl API is available, we have to rely on the pad
* configuration set up by bootloader. For usdhc example here,
* u-boot sets up the pads for 49.5 MHz case, and we have to lower
* the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
*
* FIXME: This is should be removed after pinctrl API is available.
* At that time, usdhc driver can call pinctrl API to change pad
* configuration dynamically per different usdhc clock settings.
*/
clk_set_rate(&usdhc1_clk, 49500000);
clk_set_rate(&usdhc2_clk, 49500000);
clk_set_rate(&usdhc3_clk, 49500000);
clk_set_rate(&usdhc4_clk, 49500000);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);

2
arch/arm/mach-msm/Makefile
View File

@ -15,6 +15,8 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SMP) += headsmp.o platsmp.o

4
arch/arm/mach-msm/board-msm7x30.c
View File

@ -42,8 +42,8 @@
extern struct sys_timer msm_timer;
static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
static void __init msm7x30_fixup(struct tag *tag, char **cmdline,
struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {

4
arch/arm/mach-msm/board-msm8960.c
View File

@ -32,8 +32,8 @@
#include "devices.h"
static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
static void __init msm8960_fixup(struct tag *tag, char **cmdline,
struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&

4
arch/arm/mach-msm/board-msm8x60.c
View File

@ -28,8 +28,8 @@
#include <mach/board.h>
#include <mach/msm_iomap.h>
static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
char **cmdline, struct meminfo *mi)
static void __init msm8x60_fixup(struct tag *tag, char **cmdline,
struct meminfo *mi)
{
for (; tag->hdr.size; tag = tag_next(tag))
if (tag->hdr.tag == ATAG_MEM &&

3
arch/arm/mach-msm/scm.c
View File

@ -180,6 +180,9 @@ static u32 smc(u32 cmd_addr)
__asmeq("%1", "r0")
__asmeq("%2", "r1")
__asmeq("%3", "r2")
#ifdef REQUIRES_SEC
".arch_extension sec\n"
#endif
"smc #0 @ switch to secure world\n"
: "=r" (r0)
: "r" (r0), "r" (r1), "r" (r2)

6
arch/arm/mach-mx5/clock-mx51-mx53.c
View File

@ -1281,9 +1281,9 @@ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
NULL, NULL, &ipg_clk, &gpt_ipg_clk);
DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &ipg_clk, NULL);
NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
NULL, NULL, &ipg_clk, NULL);
NULL, NULL, &ipg_perclk, NULL);
/* I2C */
DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
@ -1634,6 +1634,7 @@ int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
return 0;
}
#ifdef CONFIG_OF
static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
unsigned long *ckih1, unsigned long *ckih2)
{
@ -1671,3 +1672,4 @@ int __init mx53_clocks_init_dt(void)
clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
return mx53_clocks_init(ckil, osc, ckih1, ckih2);
}
#endif

4
arch/arm/mach-mxs/mach-mx28evk.c
View File

@ -471,7 +471,8 @@ static void __init mx28evk_init(void)
"mmc0-slot-power");
if (ret)
pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret);
mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
else
mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]);
ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW,
"mmc1-slot-power");
@ -480,7 +481,6 @@ static void __init mx28evk_init(void)
else
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
mx28_add_rtc_stmp3xxx();
gpio_led_register_device(0, &mx28evk_led_data);

2
arch/arm/mach-picoxcell/include/mach/debug-macro.S
View File

@ -14,7 +14,7 @@
#define UART_SHIFT 2
.macro addruart, rp, rv
.macro addruart, rp, rv, tmp
ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE)
ldr \rp, =PICOXCELL_UART1_BASE
.endm

2
arch/arm/mach-shmobile/Makefile
View File

@ -3,7 +3,7 @@
#
# Common objects
obj-y := timer.o console.o clock.o pm_runtime.o
obj-y := timer.o console.o clock.o
# CPU objects
obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o

16
arch/arm/mach-shmobile/board-ag5evm.c
View File

@ -515,14 +515,14 @@ static void __init ag5evm_init(void)
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0, NULL);
gpio_request(GPIO_FN_MMCD0_1, NULL);
gpio_request(GPIO_FN_MMCD0_2, NULL);
gpio_request(GPIO_FN_MMCD0_3, NULL);
gpio_request(GPIO_FN_MMCD0_4, NULL);
gpio_request(GPIO_FN_MMCD0_5, NULL);
gpio_request(GPIO_FN_MMCD0_6, NULL);
gpio_request(GPIO_FN_MMCD0_7, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
gpio_request(GPIO_PORT208, NULL); /* Reset */
gpio_direction_output(GPIO_PORT208, 1);

2
arch/arm/mach-shmobile/board-ap4evb.c
View File

@ -201,7 +201,7 @@ static struct physmap_flash_data nor_flash_data = {
static struct resource nor_flash_resources[] = {
[0] = {
.start = 0x20000000, /* CS0 shadow instead of regular CS0 */
.end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.end = 0x28000000 - 1, /* needed by USB MASK ROM boot */
.flags = IORESOURCE_MEM,
}
};

7
arch/arm/mach-shmobile/board-kota2.c
View File

@ -48,6 +48,7 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/traps.h>
/* SMSC 9220 */
static struct resource smsc9220_resources[] = {
[0] = {
.start = 0x14000000, /* CS5A */
@ -77,6 +78,7 @@ static struct platform_device eth_device = {
.num_resources = ARRAY_SIZE(smsc9220_resources),
};
/* KEYSC */
static struct sh_keysc_info keysc_platdata = {
.mode = SH_KEYSC_MODE_6,
.scan_timing = 3,
@ -120,6 +122,7 @@ static struct platform_device keysc_device = {
},
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
@ -150,6 +153,7 @@ static struct platform_device gpio_keys_device = {
},
};
/* GPIO LED */
#define GPIO_LED(n, g) { .name = n, .gpio = g }
static struct gpio_led gpio_leds[] = {
@ -175,6 +179,7 @@ static struct platform_device gpio_leds_device = {
},
};
/* MMCIF */
static struct resource mmcif_resources[] = {
[0] = {
.name = "MMCIF",
@ -207,6 +212,7 @@ static struct platform_device mmcif_device = {
.resource = mmcif_resources,
};
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.tmio_caps = MMC_CAP_SD_HIGHSPEED,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
@ -243,6 +249,7 @@ static struct platform_device sdhi0_device = {
},
};
/* SDHI1 */
static struct sh_mobile_sdhi_info sdhi1_info = {
.tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
.tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,

8
arch/arm/mach-shmobile/clock-sh7372.c
View File

@ -476,7 +476,7 @@ static struct clk_ops fsidiv_clk_ops = {
.disable = fsidiv_disable,
};
static struct clk_mapping sh7372_fsidiva_clk_mapping = {
static struct clk_mapping fsidiva_clk_mapping = {
.phys = FSIDIVA,
.len = 8,
};
@ -484,10 +484,10 @@ static struct clk_mapping sh7372_fsidiva_clk_mapping = {
struct clk sh7372_fsidiva_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIA], /* late install */
.mapping = &sh7372_fsidiva_clk_mapping,
.mapping = &fsidiva_clk_mapping,
};
static struct clk_mapping sh7372_fsidivb_clk_mapping = {
static struct clk_mapping fsidivb_clk_mapping = {
.phys = FSIDIVB,
.len = 8,
};
@ -495,7 +495,7 @@ static struct clk_mapping sh7372_fsidivb_clk_mapping = {
struct clk sh7372_fsidivb_clk = {
.ops = &fsidiv_clk_ops,
.parent = &div6_reparent_clks[DIV6_FSIB], /* late install */
.mapping = &sh7372_fsidivb_clk_mapping,
.mapping = &fsidivb_clk_mapping,
};
static struct clk *late_main_clks[] = {

52
arch/arm/mach-shmobile/cpuidle.c
View File

@ -26,65 +26,59 @@ void (*shmobile_cpuidle_modes[CPUIDLE_STATE_MAX])(void) = {
};
static int shmobile_cpuidle_enter(struct cpuidle_device *dev,
struct cpuidle_state *state)
struct cpuidle_driver *drv,
int index)
{
ktime_t before, after;
int requested_state = state - &dev->states[0];
dev->last_state = &dev->states[requested_state];
before = ktime_get();
local_irq_disable();
local_fiq_disable();
shmobile_cpuidle_modes[requested_state]();
shmobile_cpuidle_modes[index]();
local_irq_enable();
local_fiq_enable();
after = ktime_get();
return ktime_to_ns(ktime_sub(after, before)) >> 10;
dev->last_residency = ktime_to_ns(ktime_sub(after, before)) >> 10;
return index;
}
static struct cpuidle_device shmobile_cpuidle_dev;
static struct cpuidle_driver shmobile_cpuidle_driver = {
.name = "shmobile_cpuidle",
.owner = THIS_MODULE,
.states[0] = {
.name = "C1",
.desc = "WFI",
.exit_latency = 1,
.target_residency = 1 * 2,
.flags = CPUIDLE_FLAG_TIME_VALID,
},
.safe_state_index = 0, /* C1 */
.state_count = 1,
};
void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
static int shmobile_cpuidle_init(void)
{
struct cpuidle_device *dev = &shmobile_cpuidle_dev;
struct cpuidle_state *state;
struct cpuidle_driver *drv = &shmobile_cpuidle_driver;
int i;
cpuidle_register_driver(&shmobile_cpuidle_driver);
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
dev->states[i].name[0] = '\0';
dev->states[i].desc[0] = '\0';
dev->states[i].enter = shmobile_cpuidle_enter;
}
i = CPUIDLE_DRIVER_STATE_START;
state = &dev->states[i++];
snprintf(state->name, CPUIDLE_NAME_LEN, "C1");
strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN);
state->exit_latency = 1;
state->target_residency = 1 * 2;
state->power_usage = 3;
state->flags = 0;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
dev->safe_state = state;
dev->state_count = i;
for (i = 0; i < CPUIDLE_STATE_MAX; i++)
drv->states[i].enter = shmobile_cpuidle_enter;
if (shmobile_cpuidle_setup)
shmobile_cpuidle_setup(dev);
shmobile_cpuidle_setup(drv);
cpuidle_register_driver(drv);
dev->state_count = drv->state_count;
cpuidle_register_device(dev);
return 0;

4
arch/arm/mach-shmobile/include/mach/common.h
View File

@ -9,9 +9,9 @@ extern int clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
extern void shmobile_handle_irq_gic(struct pt_regs *);
extern struct platform_suspend_ops shmobile_suspend_ops;
struct cpuidle_device;
struct cpuidle_driver;
extern void (*shmobile_cpuidle_modes[])(void);
extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev);
extern void (*shmobile_cpuidle_setup)(struct cpuidle_driver *drv);
extern void sh7367_init_irq(void);
extern void sh7367_add_early_devices(void);

8
arch/arm/mach-shmobile/include/mach/sh73a0.h
View File

@ -470,6 +470,14 @@ enum {
GPIO_FN_SDHICMD2_PU,
GPIO_FN_MMCCMD0_PU,
GPIO_FN_MMCCMD1_PU,
GPIO_FN_MMCD0_0_PU,
GPIO_FN_MMCD0_1_PU,
GPIO_FN_MMCD0_2_PU,
GPIO_FN_MMCD0_3_PU,
GPIO_FN_MMCD0_4_PU,
GPIO_FN_MMCD0_5_PU,
GPIO_FN_MMCD0_6_PU,
GPIO_FN_MMCD0_7_PU,
GPIO_FN_FSIACK_PU,
GPIO_FN_FSIAILR_PU,
GPIO_FN_FSIAIBT_PU,

122
arch/arm/mach-shmobile/pfc-sh7367.c
View File

@ -21,68 +21,49 @@
#include <linux/gpio.h>
#include <mach/sh7367.h>
#define _1(fn, pfx, sfx) fn(pfx, sfx)
#define _10(fn, pfx, sfx) \
_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
#define _90(fn, pfx, sfx) \
_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
_10(fn, pfx##9, sfx)
#define _273(fn, pfx, sfx) \
_10(fn, pfx, sfx), _90(fn, pfx, sfx), \
_10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx), \
_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
_10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx), \
_1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
#define _PORT(pfx, sfx) pfx##_##sfx
#define PORT_273(str) _273(_PORT, PORT, str)
#define CPU_ALL_PORT(fn, pfx, sfx) \
PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \
PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
PORT_10(fn, pfx##26, sfx), PORT_1(fn, pfx##270, sfx), \
PORT_1(fn, pfx##271, sfx), PORT_1(fn, pfx##272, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
PORT_ALL(DATA), /* PORT0_DATA -> PORT272_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
PORT_273(IN), /* PORT0_IN -> PORT272_IN */
PORT_ALL(IN), /* PORT0_IN -> PORT272_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
PORT_ALL(OUT), /* PORT0_OUT -> PORT272_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
PORT_ALL(FN0), /* PORT0_FN0 -> PORT272_FN0 */
PORT_ALL(FN1), /* PORT0_FN1 -> PORT272_FN1 */
PORT_ALL(FN2), /* PORT0_FN2 -> PORT272_FN2 */
PORT_ALL(FN3), /* PORT0_FN3 -> PORT272_FN3 */
PORT_ALL(FN4), /* PORT0_FN4 -> PORT272_FN4 */
PORT_ALL(FN5), /* PORT0_FN5 -> PORT272_FN5 */
PORT_ALL(FN6), /* PORT0_FN6 -> PORT272_FN6 */
PORT_ALL(FN7), /* PORT0_FN7 -> PORT272_FN7 */
MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
PINMUX_FUNCTION_END,
@ -327,41 +308,6 @@ enum {
PINMUX_MARK_END,
};
#define PORT_DATA_I(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
#define PORT_DATA_I_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD)
#define PORT_DATA_I_PU(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PU)
#define PORT_DATA_I_PU_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
#define PORT_DATA_O(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
#define PORT_DATA_IO(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN)
#define PORT_DATA_IO_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PD)
#define PORT_DATA_IO_PU(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PU)
#define PORT_DATA_IO_PU_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
@ -1098,13 +1044,9 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
};
#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
static struct pinmux_gpio pinmux_gpios[] = {
/* 49-1 -> 49-6 (GPIO) */
GPIO_PORT_273(),
GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
@ -1345,22 +1287,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(DIVLOCK),
};
/* helper for top 4 bits in PORTnCR */
#define PCRH(in, in_pd, in_pu, out) \
0, (out), (in), 0, \
0, 0, 0, 0, \
0, 0, (in_pd), 0, \
0, 0, (in_pu), 0
#define PORTCR(nr, reg) \
{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
PORT##nr##_IN_PU, PORT##nr##_OUT), \
PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
PORT##nr##_FN6, PORT##nr##_FN7 } \
}
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */

224
arch/arm/mach-shmobile/pfc-sh7372.c
View File

@ -25,27 +25,13 @@
#include <linux/gpio.h>
#include <mach/sh7372.h>
#define _1(fn, pfx, sfx) fn(pfx, sfx)
#define _10(fn, pfx, sfx) \
_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
#define _80(fn, pfx, sfx) \
_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx)
#define _190(fn, pfx, sfx) \
_10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
_10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
#define _PORT(pfx, sfx) pfx##_##sfx
#define PORT_ALL(str) _190(_PORT, PORT, str)
#define CPU_ALL_PORT(fn, pfx, sfx) \
PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
PORT_10(fn, pfx##10, sfx), PORT_10(fn, pfx##11, sfx), \
PORT_10(fn, pfx##12, sfx), PORT_10(fn, pfx##13, sfx), \
PORT_10(fn, pfx##14, sfx), PORT_10(fn, pfx##15, sfx), \
PORT_10(fn, pfx##16, sfx), PORT_10(fn, pfx##17, sfx), \
PORT_10(fn, pfx##18, sfx), PORT_1(fn, pfx##190, sfx)
enum {
PINMUX_RESERVED = 0,
@ -381,108 +367,124 @@ enum {
PINMUX_MARK_END,
};
/* PORT_DATA_I_PD(nr) */
#define _I___D(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD)
/* PORT_DATA_I_PU(nr) */
#define _I__U_(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PU)
/* PORT_DATA_I_PU_PD(nr) */
#define _I__UD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
/* PORT_DATA_O(nr) */
#define __O___(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
/* PORT_DATA_IO(nr) */
#define _IO___(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN)
/* PORT_DATA_IO_PD(nr) */
#define _IO__D(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PD)
/* PORT_DATA_IO_PU(nr) */
#define _IO_U_(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PU)
/* PORT_DATA_IO_PU_PD(nr) */
#define _IO_UD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1),
PORT_DATA_O(2), PORT_DATA_I_PD(3),
PORT_DATA_I_PD(4), PORT_DATA_I_PD(5),
PORT_DATA_IO_PU_PD(6), PORT_DATA_I_PD(7),
PORT_DATA_IO_PD(8), PORT_DATA_O(9),
_IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
_I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
PORT_DATA_O(10), PORT_DATA_O(11),
PORT_DATA_IO_PU_PD(12), PORT_DATA_IO_PD(13),
PORT_DATA_IO_PD(14), PORT_DATA_O(15),
PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17),
PORT_DATA_I_PD(18), PORT_DATA_IO(19),
__O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
__O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
PORT_DATA_IO(20), PORT_DATA_IO(21),
PORT_DATA_IO(22), PORT_DATA_IO(23),
PORT_DATA_IO(24), PORT_DATA_IO(25),
PORT_DATA_IO(26), PORT_DATA_IO(27),
PORT_DATA_IO(28), PORT_DATA_IO(29),
_IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
_IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
PORT_DATA_IO(30), PORT_DATA_IO(31),
PORT_DATA_IO(32), PORT_DATA_IO(33),
PORT_DATA_IO(34), PORT_DATA_IO(35),
PORT_DATA_IO(36), PORT_DATA_IO(37),
PORT_DATA_IO(38), PORT_DATA_IO(39),
_IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
_IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
PORT_DATA_IO(40), PORT_DATA_IO(41),
PORT_DATA_IO(42), PORT_DATA_IO(43),
PORT_DATA_IO(44), PORT_DATA_IO(45),
PORT_DATA_IO_PU(46), PORT_DATA_IO_PU(47),
PORT_DATA_IO_PU(48), PORT_DATA_IO_PU(49),
_IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
_IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
PORT_DATA_IO_PU(50), PORT_DATA_IO_PU(51),
PORT_DATA_IO_PU(52), PORT_DATA_IO_PU(53),
PORT_DATA_IO_PU(54), PORT_DATA_IO_PU(55),
PORT_DATA_IO_PU(56), PORT_DATA_IO_PU(57),
PORT_DATA_IO_PU(58), PORT_DATA_IO_PU(59),
_IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
_IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
PORT_DATA_IO_PU(60), PORT_DATA_IO_PU(61),
PORT_DATA_IO(62), PORT_DATA_O(63),
PORT_DATA_O(64), PORT_DATA_IO_PU(65),
PORT_DATA_O(66), PORT_DATA_IO_PU(67), /*66?*/
PORT_DATA_O(68), PORT_DATA_IO(69),
_IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
_IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
PORT_DATA_IO(70), PORT_DATA_IO(71),
PORT_DATA_O(72), PORT_DATA_I_PU(73),
PORT_DATA_I_PU_PD(74), PORT_DATA_IO_PU_PD(75),
PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
_IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
_IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
PORT_DATA_IO_PU_PD(82), PORT_DATA_IO_PU_PD(83),
PORT_DATA_IO_PU_PD(84), PORT_DATA_IO_PU_PD(85),
PORT_DATA_IO_PU_PD(86), PORT_DATA_IO_PU_PD(87),
PORT_DATA_IO_PU_PD(88), PORT_DATA_IO_PU_PD(89),
_IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
_IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
PORT_DATA_IO_PU_PD(90), PORT_DATA_IO_PU_PD(91),
PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93),
PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95),
PORT_DATA_IO_PU(96), PORT_DATA_IO_PU_PD(97),
PORT_DATA_IO_PU_PD(98), PORT_DATA_O(99), /*99?*/
_IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
_IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
PORT_DATA_IO_PD(100), PORT_DATA_IO_PD(101),
PORT_DATA_IO_PD(102), PORT_DATA_IO_PD(103),
PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105),
PORT_DATA_IO_PU(106), PORT_DATA_IO_PU(107),
PORT_DATA_IO_PU(108), PORT_DATA_IO_PU(109),
_IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
_IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
PORT_DATA_IO_PU(110), PORT_DATA_IO_PU(111),
PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
PORT_DATA_IO_PU(114), PORT_DATA_IO_PU(115),
PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119),
_IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
_IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
PORT_DATA_IO_PU(120), PORT_DATA_IO_PD(121),
PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123),
PORT_DATA_IO_PD(124), PORT_DATA_IO_PD(125),
PORT_DATA_IO_PD(126), PORT_DATA_IO_PD(127),
PORT_DATA_IO_PD(128), PORT_DATA_IO_PU_PD(129),
_IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
_IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
PORT_DATA_IO_PU_PD(130), PORT_DATA_IO_PU_PD(131),
PORT_DATA_IO_PU_PD(132), PORT_DATA_IO_PU_PD(133),
PORT_DATA_IO_PU_PD(134), PORT_DATA_IO_PU_PD(135),
PORT_DATA_IO_PD(136), PORT_DATA_IO_PD(137),
PORT_DATA_IO_PD(138), PORT_DATA_IO_PD(139),
_IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
_IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
PORT_DATA_IO_PD(140), PORT_DATA_IO_PD(141),
PORT_DATA_IO_PD(142), PORT_DATA_IO_PU_PD(143),
PORT_DATA_IO_PD(144), PORT_DATA_IO_PD(145),
PORT_DATA_IO_PD(146), PORT_DATA_IO_PD(147),
PORT_DATA_IO_PD(148), PORT_DATA_IO_PD(149),
_IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
_IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151),
PORT_DATA_IO_PU_PD(152), PORT_DATA_I_PD(153),
PORT_DATA_IO_PU_PD(154), PORT_DATA_I_PD(155),
PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157),
PORT_DATA_I_PD(158), PORT_DATA_IO_PD(159),
_IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
_I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
PORT_DATA_O(160), PORT_DATA_IO_PD(161),
PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163),
PORT_DATA_I_PD(164), PORT_DATA_IO_PD(165),
PORT_DATA_I_PD(166), PORT_DATA_I_PD(167),
PORT_DATA_I_PD(168), PORT_DATA_I_PD(169),
__O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
_IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
PORT_DATA_I_PD(170), PORT_DATA_O(171),
PORT_DATA_IO_PU_PD(172), PORT_DATA_IO_PU_PD(173),
PORT_DATA_IO_PU_PD(174), PORT_DATA_IO_PU_PD(175),
PORT_DATA_IO_PU_PD(176), PORT_DATA_IO_PU_PD(177),
PORT_DATA_IO_PU_PD(178), PORT_DATA_O(179),
_I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
_IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
PORT_DATA_IO_PU_PD(180), PORT_DATA_IO_PU_PD(181),
PORT_DATA_IO_PU_PD(182), PORT_DATA_IO_PU_PD(183),
PORT_DATA_IO_PU_PD(184), PORT_DATA_O(185),
PORT_DATA_IO_PU_PD(186), PORT_DATA_IO_PU_PD(187),
PORT_DATA_IO_PU_PD(188), PORT_DATA_IO_PU_PD(189),
_IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
__O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
_IO_UD(190),
PORT_DATA_IO_PU_PD(190),
/* IRQ */
PINMUX_DATA(IRQ0_6_MARK, PORT6_FN0, MSEL1CR_0_0),
@ -926,10 +928,6 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(MFIv4_MARK, MSEL4CR_6_1),
};
#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
static struct pinmux_gpio pinmux_gpios[] = {
/* PORT */
@ -1201,22 +1199,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(SDENC_DV_CLKI),
};
/* helper for top 4 bits in PORTnCR */
#define PCRH(in, in_pd, in_pu, out) \
0, (out), (in), 0, \
0, 0, 0, 0, \
0, 0, (in_pd), 0, \
0, 0, (in_pu), 0
#define PORTCR(nr, reg) \
{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
PORT##nr##_IN_PU, PORT##nr##_OUT), \
PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
PORT##nr##_FN6, PORT##nr##_FN7 } \
}
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xE6051000), /* PORT0CR */
PORTCR(1, 0xE6051001), /* PORT1CR */

159
arch/arm/mach-shmobile/pfc-sh7377.c
View File

@ -22,84 +22,65 @@
#include <linux/gpio.h>
#include <mach/sh7377.h>
#define _1(fn, pfx, sfx) fn(pfx, sfx)
#define _10(fn, pfx, sfx) \
_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
#define _90(fn, pfx, sfx) \
_10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx), \
_10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx), \
_10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx), \
_10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx), \
_10(fn, pfx##9, sfx)
#define _265(fn, pfx, sfx) \
_10(fn, pfx, sfx), _90(fn, pfx, sfx), \
_10(fn, pfx##10, sfx), \
_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
_1(fn, pfx##118, sfx), \
_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
_10(fn, pfx##15, sfx), \
_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
_1(fn, pfx##164, sfx), \
_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
_1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx), \
_1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx), \
_1(fn, pfx##264, sfx)
#define _PORT(pfx, sfx) pfx##_##sfx
#define PORT_265(str) _265(_PORT, PORT, str)
#define CPU_ALL_PORT(fn, pfx, sfx) \
PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
PORT_10(fn, pfx##10, sfx), \
PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
PORT_1(fn, pfx##118, sfx), \
PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
PORT_10(fn, pfx##15, sfx), \
PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
PORT_1(fn, pfx##164, sfx), \
PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
PORT_1(fn, pfx##260, sfx), PORT_1(fn, pfx##261, sfx), \
PORT_1(fn, pfx##262, sfx), PORT_1(fn, pfx##263, sfx), \
PORT_1(fn, pfx##264, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
PORT_ALL(DATA), /* PORT0_DATA -> PORT264_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
PORT_265(IN), /* PORT0_IN -> PORT264_IN */
PORT_ALL(IN), /* PORT0_IN -> PORT264_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
PORT_ALL(OUT), /* PORT0_OUT -> PORT264_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
PORT_ALL(FN0), /* PORT0_FN0 -> PORT264_FN0 */
PORT_ALL(FN1), /* PORT0_FN1 -> PORT264_FN1 */
PORT_ALL(FN2), /* PORT0_FN2 -> PORT264_FN2 */
PORT_ALL(FN3), /* PORT0_FN3 -> PORT264_FN3 */
PORT_ALL(FN4), /* PORT0_FN4 -> PORT264_FN4 */
PORT_ALL(FN5), /* PORT0_FN5 -> PORT264_FN5 */
PORT_ALL(FN6), /* PORT0_FN6 -> PORT264_FN6 */
PORT_ALL(FN7), /* PORT0_FN7 -> PORT264_FN7 */
MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
@ -360,45 +341,6 @@ enum {
PINMUX_MARK_END,
};
#define PORT_DATA_I(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
#define PORT_DATA_I_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD)
#define PORT_DATA_I_PU(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PU)
#define PORT_DATA_I_PU_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD, \
PORT##nr##_IN_PU)
#define PORT_DATA_O(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT)
#define PORT_DATA_IO(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN)
#define PORT_DATA_IO_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN, \
PORT##nr##_IN_PD)
#define PORT_DATA_IO_PU(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN, \
PORT##nr##_IN_PU)
#define PORT_DATA_IO_PU_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN, \
PORT##nr##_IN_PD, PORT##nr##_IN_PU)
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
/* 55-1 (GPIO) */
@ -1078,13 +1020,9 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
};
#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
static struct pinmux_gpio pinmux_gpios[] = {
/* 55-1 -> 55-5 (GPIO) */
GPIO_PORT_265(),
GPIO_PORT_ALL(),
/* Special Pull-up / Pull-down Functions */
GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
@ -1362,23 +1300,6 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(RESETOUTS),
};
/* helper for top 4 bits in PORTnCR */
#define PCRH(in, in_pd, in_pu, out) \
0, (out), (in), 0, \
0, 0, 0, 0, \
0, 0, (in_pd), 0, \
0, 0, (in_pu), 0
#define PORTCR(nr, reg) \
{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
PCRH(PORT##nr##_IN, PORT##nr##_IN_PD, \
PORT##nr##_IN_PU, PORT##nr##_OUT), \
PORT##nr##_FN0, PORT##nr##_FN1, \
PORT##nr##_FN2, PORT##nr##_FN3, \
PORT##nr##_FN4, PORT##nr##_FN5, \
PORT##nr##_FN6, PORT##nr##_FN7 } \
}
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */

193
arch/arm/mach-shmobile/pfc-sh73a0.c
View File

@ -24,83 +24,71 @@
#include <mach/sh73a0.h>
#include <mach/irqs.h>
#define _1(fn, pfx, sfx) fn(pfx, sfx)
#define _10(fn, pfx, sfx) \
_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx), \
_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx), \
_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx), \
_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx), \
_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
#define _310(fn, pfx, sfx) \
_10(fn, pfx, sfx), _10(fn, pfx##1, sfx), \
_10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx), \
_10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx), \
_10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx), \
_10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx), \
_10(fn, pfx##10, sfx), \
_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx), \
_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx), \
_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx), \
_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx), \
_1(fn, pfx##118, sfx), \
_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx), \
_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx), \
_10(fn, pfx##15, sfx), \
_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx), \
_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx), \
_1(fn, pfx##164, sfx), \
_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx), \
_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx), \
_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx), \
_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx), \
_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx), \
_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx), \
_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx), \
_10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx), \
_1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx), \
_1(fn, pfx##282, sfx), \
_1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx), \
_10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
#define _PORT(pfx, sfx) pfx##_##sfx
#define PORT_310(str) _310(_PORT, PORT, str)
#define CPU_ALL_PORT(fn, pfx, sfx) \
PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \
PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \
PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \
PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \
PORT_10(fn, pfx##10, sfx), \
PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
PORT_1(fn, pfx##118, sfx), \
PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
PORT_10(fn, pfx##15, sfx), \
PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
PORT_1(fn, pfx##164, sfx), \
PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \
PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \
PORT_1(fn, pfx##282, sfx), \
PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \
PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
enum {
PINMUX_RESERVED = 0,
PINMUX_DATA_BEGIN,
PORT_310(DATA), /* PORT0_DATA -> PORT309_DATA */
PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */
PINMUX_DATA_END,
PINMUX_INPUT_BEGIN,
PORT_310(IN), /* PORT0_IN -> PORT309_IN */
PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */
PINMUX_INPUT_END,
PINMUX_INPUT_PULLUP_BEGIN,
PORT_310(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
PINMUX_INPUT_PULLUP_END,
PINMUX_INPUT_PULLDOWN_BEGIN,
PORT_310(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
PINMUX_INPUT_PULLDOWN_END,
PINMUX_OUTPUT_BEGIN,
PORT_310(OUT), /* PORT0_OUT -> PORT309_OUT */
PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */
PINMUX_OUTPUT_END,
PINMUX_FUNCTION_BEGIN,
PORT_310(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
PORT_310(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
PORT_310(FN0), /* PORT0_FN0 -> PORT309_FN0 */
PORT_310(FN1), /* PORT0_FN1 -> PORT309_FN1 */
PORT_310(FN2), /* PORT0_FN2 -> PORT309_FN2 */
PORT_310(FN3), /* PORT0_FN3 -> PORT309_FN3 */
PORT_310(FN4), /* PORT0_FN4 -> PORT309_FN4 */
PORT_310(FN5), /* PORT0_FN5 -> PORT309_FN5 */
PORT_310(FN6), /* PORT0_FN6 -> PORT309_FN6 */
PORT_310(FN7), /* PORT0_FN7 -> PORT309_FN7 */
PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */
PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */
PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */
PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */
PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */
PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */
PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */
PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */
MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
@ -508,6 +496,14 @@ enum {
SDHICMD2_PU_MARK,
MMCCMD0_PU_MARK,
MMCCMD1_PU_MARK,
MMCD0_0_PU_MARK,
MMCD0_1_PU_MARK,
MMCD0_2_PU_MARK,
MMCD0_3_PU_MARK,
MMCD0_4_PU_MARK,
MMCD0_5_PU_MARK,
MMCD0_6_PU_MARK,
MMCD0_7_PU_MARK,
FSIBISLD_PU_MARK,
FSIACK_PU_MARK,
FSIAILR_PU_MARK,
@ -517,45 +513,6 @@ enum {
PINMUX_MARK_END,
};
#define PORT_DATA_I(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
#define PORT_DATA_I_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD)
#define PORT_DATA_I_PU(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PU)
#define PORT_DATA_I_PU_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_IN, PORT##nr##_IN_PD, \
PORT##nr##_IN_PU)
#define PORT_DATA_O(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT)
#define PORT_DATA_IO(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN)
#define PORT_DATA_IO_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN, \
PORT##nr##_IN_PD)
#define PORT_DATA_IO_PU(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN, \
PORT##nr##_IN_PU)
#define PORT_DATA_IO_PU_PD(nr) \
PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
PORT##nr##_OUT, PORT##nr##_IN, \
PORT##nr##_IN_PD, PORT##nr##_IN_PU)
static pinmux_enum_t pinmux_data[] = {
/* specify valid pin states for each pin in GPIO mode */
@ -1561,6 +1518,24 @@ static pinmux_enum_t pinmux_data[] = {
MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
MSEL4CR_MSEL15_1),
PINMUX_DATA(MMCD0_0_PU_MARK,
PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_1_PU_MARK,
PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_2_PU_MARK,
PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_3_PU_MARK,
PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_4_PU_MARK,
PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_5_PU_MARK,
PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_6_PU_MARK,
PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(MMCD0_7_PU_MARK,
PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
@ -1568,12 +1543,8 @@ static pinmux_enum_t pinmux_data[] = {
PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
};
#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
static struct pinmux_gpio pinmux_gpios[] = {
GPIO_PORT_310(),
GPIO_PORT_ALL(),
/* Table 25-1 (Functions 0-7) */
GPIO_FN(VBUS_0),
@ -2236,24 +2207,20 @@ static struct pinmux_gpio pinmux_gpios[] = {
GPIO_FN(SDHICMD2_PU),
GPIO_FN(MMCCMD0_PU),
GPIO_FN(MMCCMD1_PU),
GPIO_FN(MMCD0_0_PU),
GPIO_FN(MMCD0_1_PU),
GPIO_FN(MMCD0_2_PU),
GPIO_FN(MMCD0_3_PU),
GPIO_FN(MMCD0_4_PU),
GPIO_FN(MMCD0_5_PU),
GPIO_FN(MMCD0_6_PU),
GPIO_FN(MMCD0_7_PU),
GPIO_FN(FSIACK_PU),
GPIO_FN(FSIAILR_PU),
GPIO_FN(FSIAIBT_PU),
GPIO_FN(FSIAISLD_PU),
};
#define PORTCR(nr, reg) \
{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
0, \
/*0001*/ PORT##nr##_OUT , \
/*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
/*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
/*1110*/ PORT##nr##_IN_PU, 0, \
PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
}
static struct pinmux_cfg_reg pinmux_config_regs[] = {
PORTCR(0, 0xe6050000), /* PORT0CR */
PORTCR(1, 0xe6050001), /* PORT1CR */

47
arch/arm/mach-shmobile/pm-sh7372.c
View File

@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/bitrev.h>
#include <linux/console.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/tlbflush.h>
@ -106,9 +107,8 @@ static int pd_power_down(struct generic_pm_domain *genpd)
return 0;
}
static int pd_power_up(struct generic_pm_domain *genpd)
static int __pd_power_up(struct sh7372_pm_domain *sh7372_pd, bool do_resume)
{
struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd);
unsigned int mask = 1 << sh7372_pd->bit_shift;
unsigned int retry_count;
int ret = 0;
@ -123,13 +123,13 @@ static int pd_power_up(struct generic_pm_domain *genpd)
for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) {
if (!(__raw_readl(SWUCR) & mask))
goto out;
break;
if (retry_count > PSTR_RETRIES)
udelay(PSTR_DELAY_US);
else
cpu_relax();
}
if (__raw_readl(SWUCR) & mask)
if (!retry_count)
ret = -EIO;
if (!sh7372_pd->no_debug)
@ -137,12 +137,17 @@ static int pd_power_up(struct generic_pm_domain *genpd)
mask, __raw_readl(PSTR));
out:
if (ret == 0 && sh7372_pd->resume)
if (ret == 0 && sh7372_pd->resume && do_resume)
sh7372_pd->resume();
return ret;
}
static int pd_power_up(struct generic_pm_domain *genpd)
{
return __pd_power_up(to_sh7372_pd(genpd), true);
}
static void sh7372_a4r_suspend(void)
{
sh7372_intcs_suspend();
@ -174,7 +179,7 @@ void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd)
genpd->active_wakeup = pd_active_wakeup;
genpd->power_off = pd_power_down;
genpd->power_on = pd_power_up;
genpd->power_on(&sh7372_pd->genpd);
__pd_power_up(sh7372_pd, false);
}
void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd,
@ -227,11 +232,23 @@ struct sh7372_pm_domain sh7372_a3sp = {
.no_debug = true,
};
static void sh7372_a3sp_init(void)
{
/* serial consoles make use of SCIF hardware located in A3SP,
* keep such power domain on if "no_console_suspend" is set.
*/
sh7372_a3sp.stay_on = !console_suspend_enabled;
}
struct sh7372_pm_domain sh7372_a3sg = {
.bit_shift = 13,
};
#endif /* CONFIG_PM */
#else /* !CONFIG_PM */
static inline void sh7372_a3sp_init(void) {}
#endif /* !CONFIG_PM */
#if defined(CONFIG_SUSPEND) || defined(CONFIG_CPU_IDLE)
static int sh7372_do_idle_core_standby(unsigned long unused)
@ -402,22 +419,18 @@ static void sh7372_setup_a3sm(unsigned long msk, unsigned long msk2)
#ifdef CONFIG_CPU_IDLE
static void sh7372_cpuidle_setup(struct cpuidle_device *dev)
static void sh7372_cpuidle_setup(struct cpuidle_driver *drv)
{
struct cpuidle_state *state;
int i = dev->state_count;
struct cpuidle_state *state = &drv->states[drv->state_count];
state = &dev->states[i];
snprintf(state->name, CPUIDLE_NAME_LEN, "C2");
strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN);
state->exit_latency = 10;
state->target_residency = 20 + 10;
state->power_usage = 1; /* perhaps not */
state->flags = 0;
state->flags |= CPUIDLE_FLAG_TIME_VALID;
shmobile_cpuidle_modes[i] = sh7372_enter_core_standby;
state->flags = CPUIDLE_FLAG_TIME_VALID;
shmobile_cpuidle_modes[drv->state_count] = sh7372_enter_core_standby;
dev->state_count = i + 1;
drv->state_count++;
}
static void sh7372_cpuidle_init(void)
@ -469,6 +482,8 @@ void __init sh7372_pm_init(void)
/* do not convert A3SM, A3SP, A3SG, A4R power down into A4S */
__raw_writel(0, PDNSEL);
sh7372_a3sp_init();
sh7372_suspend_init();
sh7372_cpuidle_init();
}

13
arch/arm/mach-tegra/board-dt.c
View File

@ -101,6 +101,13 @@ static void __init tegra_dt_init(void)
tegra_clk_init_from_table(tegra_dt_clk_init_table);
/*
* Finished with the static registrations now; fill in the missing
* devices
*/
of_platform_populate(NULL, tegra_dt_match_table,
tegra20_auxdata_lookup, NULL);
for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
if (of_machine_is_compatible(pinmux_configs[i].machine)) {
pinmux_configs[i].init();
@ -110,12 +117,6 @@ static void __init tegra_dt_init(void)
WARN(i == ARRAY_SIZE(pinmux_configs),
"Unknown platform! Pinmuxing not initialized\n");
/*
* Finished with the static registrations now; fill in the missing
* devices
*/
of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL);
}
static const char * tegra_dt_board_compat[] = {

6
arch/arm/mach-tegra/board-harmony-pinmux.c
View File

@ -16,6 +16,8 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <mach/pinmux.h>
#include "gpio-names.h"
@ -161,7 +163,9 @@ static struct tegra_gpio_table gpio_table[] = {
void harmony_pinmux_init(void)
{
platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
if (!of_machine_is_compatible("nvidia,tegra20"))
platform_add_devices(pinmux_devices,
ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(harmony_pinmux, ARRAY_SIZE(harmony_pinmux));

6
arch/arm/mach-tegra/board-paz00-pinmux.c
View File

@ -16,6 +16,8 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <mach/pinmux.h>
#include "gpio-names.h"
@ -158,7 +160,9 @@ static struct tegra_gpio_table gpio_table[] = {
void paz00_pinmux_init(void)
{
platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
if (!of_machine_is_compatible("nvidia,tegra20"))
platform_add_devices(pinmux_devices,
ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(paz00_pinmux, ARRAY_SIZE(paz00_pinmux));

6
arch/arm/mach-tegra/board-seaboard-pinmux.c
View File

@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <mach/pinmux.h>
#include <mach/pinmux-t2.h>
@ -191,6 +192,7 @@ static struct tegra_gpio_table common_gpio_table[] = {
{ .gpio = TEGRA_GPIO_SD2_POWER, .enable = true },
{ .gpio = TEGRA_GPIO_LIDSWITCH, .enable = true },
{ .gpio = TEGRA_GPIO_POWERKEY, .enable = true },
{ .gpio = TEGRA_GPIO_HP_DET, .enable = true },
{ .gpio = TEGRA_GPIO_ISL29018_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_CDC_IRQ, .enable = true },
{ .gpio = TEGRA_GPIO_USB1, .enable = true },
@ -218,7 +220,9 @@ static void __init update_pinmux(struct tegra_pingroup_config *newtbl, int size)
void __init seaboard_common_pinmux_init(void)
{
platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
if (!of_machine_is_compatible("nvidia,tegra20"))
platform_add_devices(pinmux_devices,
ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(seaboard_pinmux, ARRAY_SIZE(seaboard_pinmux));

5
arch/arm/mach-tegra/board-trimslice-pinmux.c
View File

@ -16,6 +16,7 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <mach/pinmux.h>
@ -157,7 +158,9 @@ static struct tegra_gpio_table gpio_table[] = {
void __init trimslice_pinmux_init(void)
{
platform_add_devices(pinmux_devices, ARRAY_SIZE(pinmux_devices));
if (!of_machine_is_compatible("nvidia,tegra20"))
platform_add_devices(pinmux_devices,
ARRAY_SIZE(pinmux_devices));
tegra_pinmux_config_table(trimslice_pinmux, ARRAY_SIZE(trimslice_pinmux));
tegra_gpio_config(gpio_table, ARRAY_SIZE(gpio_table));
}

4
arch/arm/mach-w90x900/dev.c
View File

@ -422,7 +422,7 @@ struct platform_device nuc900_device_kpi = {
/* LCD controller*/
static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
static struct nuc900fb_display nuc900_lcd_info[] = {
/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
[0] = {
.type = LCM_DCCS_VA_SRC_RGB565,
@ -445,7 +445,7 @@ static struct nuc900fb_display __initdata nuc900_lcd_info[] = {
},
};
static struct nuc900fb_mach_info nuc900_fb_info __initdata = {
static struct nuc900fb_mach_info nuc900_fb_info = {
#if defined(CONFIG_GPM1040A0_320X240)
.displays = &nuc900_lcd_info[0],
#else

3
arch/arm/mach-w90x900/include/mach/mfp.h
View File

@ -19,6 +19,7 @@
extern void mfp_set_groupf(struct device *dev);
extern void mfp_set_groupc(struct device *dev);
extern void mfp_set_groupi(struct device *dev);
extern void mfp_set_groupg(struct device *dev);
extern void mfp_set_groupg(struct device *dev, const char *subname);
extern void mfp_set_groupd(struct device *dev, const char *subname);
#endif /* __ASM_ARCH_MFP_H */

2
arch/arm/mach-w90x900/include/mach/nuc900_spi.h
View File

@ -14,7 +14,7 @@
#ifndef __ASM_ARCH_SPI_H
#define __ASM_ARCH_SPI_H
extern void mfp_set_groupg(struct device *dev);
extern void mfp_set_groupg(struct device *dev, const char *subname);
struct nuc900_spi_info {
unsigned int num_cs;

48
arch/arm/mach-w90x900/mfp.c
View File

@ -26,10 +26,8 @@
#define REG_MFSEL (W90X900_VA_GCR + 0xC)
#define GPSELF (0x01 << 1)
#define GPSELC (0x03 << 2)
#define ENKPI (0x02 << 2)
#define ENNAND (0x01 << 2)
#define GPSELD (0x0f << 4)
#define GPSELEI0 (0x01 << 26)
#define GPSELEI1 (0x01 << 27)
@ -37,11 +35,16 @@
#define GPIOG0TO1 (0x03 << 14)
#define GPIOG2TO3 (0x03 << 16)
#define GPIOG22TO23 (0x03 << 22)
#define GPIOG18TO20 (0x07 << 18)
#define ENSPI (0x0a << 14)
#define ENI2C0 (0x01 << 14)
#define ENI2C1 (0x01 << 16)
#define ENAC97 (0x02 << 22)
#define ENSD1 (0x02 << 18)
#define ENSD0 (0x0a << 4)
#define ENKPI (0x02 << 2)
#define ENNAND (0x01 << 2)
static DEFINE_MUTEX(mfp_mutex);
@ -127,16 +130,19 @@ void mfp_set_groupi(struct device *dev)
}
EXPORT_SYMBOL(mfp_set_groupi);
void mfp_set_groupg(struct device *dev)
void mfp_set_groupg(struct device *dev, const char *subname)
{
unsigned long mfpen;
const char *dev_id;
BUG_ON(!dev);
BUG_ON((!dev) && (!subname));
mutex_lock(&mfp_mutex);
dev_id = dev_name(dev);
if (subname != NULL)
dev_id = subname;
else
dev_id = dev_name(dev);
mfpen = __raw_readl(REG_MFSEL);
@ -152,6 +158,9 @@ void mfp_set_groupg(struct device *dev)
} else if (strcmp(dev_id, "nuc900-audio") == 0) {
mfpen &= ~(GPIOG22TO23);
mfpen |= ENAC97;/*enable AC97*/
} else if (strcmp(dev_id, "nuc900-mmc-port1") == 0) {
mfpen &= ~(GPIOG18TO20);
mfpen |= (ENSD1 | 0x01);/*enable sd1*/
} else {
mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
}
@ -162,3 +171,30 @@ void mfp_set_groupg(struct device *dev)
}
EXPORT_SYMBOL(mfp_set_groupg);
void mfp_set_groupd(struct device *dev, const char *subname)
{
unsigned long mfpen;
const char *dev_id;
BUG_ON((!dev) && (!subname));
mutex_lock(&mfp_mutex);
if (subname != NULL)
dev_id = subname;
else
dev_id = dev_name(dev);
mfpen = __raw_readl(REG_MFSEL);
if (strcmp(dev_id, "nuc900-mmc-port0") == 0) {
mfpen &= ~GPSELD;/*enable sd0*/
mfpen |= ENSD0;
} else
mfpen &= (~GPSELD);
__raw_writel(mfpen, REG_MFSEL);
mutex_unlock(&mfp_mutex);
}
EXPORT_SYMBOL(mfp_set_groupd);

4
arch/arm/plat-mxc/Kconfig
View File

@ -10,7 +10,7 @@ choice
config ARCH_IMX_V4_V5
bool "i.MX1, i.MX21, i.MX25, i.MX27"
select AUTO_ZRELADDR
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for systems based on the Freescale i.MX ARMv4
@ -26,7 +26,7 @@ config ARCH_IMX_V6_V7
config ARCH_MX5
bool "i.MX50, i.MX51, i.MX53"
select AUTO_ZRELADDR
select AUTO_ZRELADDR if !ZBOOT_ROM
select ARM_PATCH_PHYS_VIRT
help
This enables support for machines using Freescale's i.MX50 and i.MX53

1
arch/arm/plat-mxc/avic.c
View File

@ -22,6 +22,7 @@
#include <linux/io.h>
#include <mach/common.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
#include "irq-common.h"

11
arch/arm/plat-mxc/gic.c
View File

@ -28,21 +28,14 @@ asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
if (irqnr == 1023)
break;
if (irqnr > 29 && irqnr < 1021)
if (irqnr > 15 && irqnr < 1021)
handle_IRQ(irqnr, regs);
#ifdef CONFIG_SMP
else if (irqnr < 16) {
else {
writel_relaxed(irqstat, gic_cpu_base_addr +
GIC_CPU_EOI);
handle_IPI(irqnr, regs);
}
#endif
#ifdef CONFIG_LOCAL_TIMERS
else if (irqnr == 29) {
writel_relaxed(irqstat, gic_cpu_base_addr +
GIC_CPU_EOI);
handle_local_timer(regs);
}
#endif
} while (1);
}

3
arch/arm/plat-mxc/include/mach/entry-macro.S
View File

@ -25,6 +25,3 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
.macro test_for_ltirq, irqnr, irqstat, base, tmp
.endm

1
arch/arm/plat-mxc/tzic.c
View File

@ -17,6 +17,7 @@
#include <linux/io.h>
#include <asm/mach/irq.h>
#include <asm/exception.h>
#include <mach/hardware.h>
#include <mach/common.h>

2
arch/blackfin/include/asm/bfin_serial.h
View File

@ -32,6 +32,8 @@ struct work_struct;
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;
int tx_irq;
int rx_irq;
int status_irq;
#ifndef BFIN_UART_BF54X_STYLE
unsigned int lsr;

14
arch/blackfin/mach-bf518/boards/ezbrd.c
View File

@ -372,9 +372,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -415,9 +420,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

14
arch/blackfin/mach-bf518/boards/tcm-bf518.c
View File

@ -308,9 +308,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -351,9 +356,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

14
arch/blackfin/mach-bf527/boards/ad7160eval.c
View File

@ -380,9 +380,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -423,9 +428,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

16
arch/blackfin/mach-bf527/boards/cm_bf527.c
View File

@ -8,6 +8,7 @@
*/
#include <linux/device.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -538,9 +539,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -581,9 +587,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -801,7 +812,6 @@ static struct platform_device bfin_sport1_uart_device = {
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/export.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},

16
arch/blackfin/mach-bf527/boards/ezbrd.c
View File

@ -7,6 +7,7 @@
*/
#include <linux/device.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -416,9 +417,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -459,9 +465,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -674,7 +685,6 @@ static struct platform_device bfin_sport1_uart_device = {
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/export.h>
static struct gpio_keys_button bfin_gpio_keys_table[] = {
{BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},

14
arch/blackfin/mach-bf527/boards/ezkit.c
View File

@ -710,9 +710,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -753,9 +758,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

14
arch/blackfin/mach-bf527/boards/tll6527m.c
View File

@ -495,9 +495,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -539,9 +544,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf533/boards/H8606.c
View File

@ -237,9 +237,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf533/boards/blackstamp.c
View File

@ -192,9 +192,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf533/boards/cm_bf533.c
View File

@ -220,9 +220,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf533/boards/ezkit.c
View File

@ -291,9 +291,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf533/boards/ip0x.c
View File

@ -150,9 +150,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf533/boards/stamp.c
View File

@ -297,9 +297,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX + 1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{

16
arch/blackfin/mach-bf537/boards/cm_bf537e.c
View File

@ -8,6 +8,7 @@
*/
#include <linux/device.h>
#include <linux/export.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
@ -304,9 +305,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -365,9 +371,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -569,7 +580,6 @@ static struct platform_device bfin_sport1_uart_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {

16
arch/blackfin/mach-bf537/boards/cm_bf537u.c
View File

@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -305,9 +306,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -348,9 +354,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -534,7 +545,6 @@ static struct platform_device bfin_sport1_uart_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {

16
arch/blackfin/mach-bf537/boards/dnp5370.c
View File

@ -12,6 +12,7 @@
*/
#include <linux/device.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@ -49,7 +50,6 @@ static struct platform_device rtc_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_RMII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {
@ -236,9 +236,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -280,9 +285,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

14
arch/blackfin/mach-bf537/boards/minotaur.c
View File

@ -239,9 +239,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -282,9 +287,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

15
arch/blackfin/mach-bf537/boards/pnav10.c
View File

@ -8,6 +8,7 @@
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -308,9 +309,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -351,9 +357,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{

16
arch/blackfin/mach-bf537/boards/stamp.c
View File

@ -7,6 +7,7 @@
*/
#include <linux/device.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
@ -1565,9 +1566,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -1620,9 +1626,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -1992,7 +2003,6 @@ static struct adp8870_backlight_platform_data adp8870_pdata = {
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
#include <linux/i2c/adp8860.h>
#include <linux/export.h>
static struct led_info adp8860_leds[] = {
{
.name = "adp8860-led7",

16
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View File

@ -9,6 +9,7 @@
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@ -305,9 +306,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -348,9 +354,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -536,7 +547,6 @@ static struct platform_device bfin_sport1_uart_device = {
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
#include <linux/export.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;
static struct bfin_phydev_platform_data bfin_phydev_data[] = {

21
arch/blackfin/mach-bf538/boards/ezkit.c
View File

@ -48,9 +48,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -103,9 +108,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -146,9 +156,14 @@ static struct resource bfin_uart2_resources[] = {
.end = UART2_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART2_TX,
.end = IRQ_UART2_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART2_RX,
.end = IRQ_UART2_RX+1,
.end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{

28
arch/blackfin/mach-bf548/boards/cm_bf548.c
View File

@ -134,9 +134,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -177,9 +182,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -236,9 +246,14 @@ static struct resource bfin_uart2_resources[] = {
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART2_TX,
.end = IRQ_UART2_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART2_RX,
.end = IRQ_UART2_RX+1,
.end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -279,9 +294,14 @@ static struct resource bfin_uart3_resources[] = {
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART3_TX,
.end = IRQ_UART3_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART3_RX,
.end = IRQ_UART3_RX+1,
.end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{

28
arch/blackfin/mach-bf548/boards/ezkit.c
View File

@ -240,9 +240,14 @@ static struct resource bfin_uart0_resources[] = {
.end = UART0_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART0_TX,
.end = IRQ_UART0_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART0_RX,
.end = IRQ_UART0_RX+1,
.end = IRQ_UART0_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -283,9 +288,14 @@ static struct resource bfin_uart1_resources[] = {
.end = UART1_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART1_TX,
.end = IRQ_UART1_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART1_RX,
.end = IRQ_UART1_RX+1,
.end = IRQ_UART1_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -342,9 +352,14 @@ static struct resource bfin_uart2_resources[] = {
.end = UART2_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART2_TX,
.end = IRQ_UART2_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART2_RX,
.end = IRQ_UART2_RX+1,
.end = IRQ_UART2_RX,
.flags = IORESOURCE_IRQ,
},
{
@ -385,9 +400,14 @@ static struct resource bfin_uart3_resources[] = {
.end = UART3_RBR+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART3_TX,
.end = IRQ_UART3_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART3_RX,
.end = IRQ_UART3_RX+1,
.end = IRQ_UART3_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf561/boards/acvilon.c
View File

@ -202,9 +202,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL + 2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART_TX,
.end = IRQ_UART_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX + 1,
.end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf561/boards/cm_bf561.c
View File

@ -276,9 +276,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART_TX,
.end = IRQ_UART_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX+1,
.end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf561/boards/ezkit.c
View File

@ -171,9 +171,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART_TX,
.end = IRQ_UART_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX+1,
.end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{

7
arch/blackfin/mach-bf561/boards/tepla.c
View File

@ -50,9 +50,14 @@ static struct resource bfin_uart0_resources[] = {
.end = BFIN_UART_GCTL+2,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_UART_TX,
.end = IRQ_UART_TX,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_UART_RX,
.end = IRQ_UART_RX+1,
.end = IRQ_UART_RX,
.flags = IORESOURCE_IRQ,
},
{

Some files were not shown because too many files have changed in this diff Show More