hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

This commit is contained in:
David S. Miller 2009-10-08 15:55:21 -07:00
parent ad61df918c 8a8e05e5d8
commit 67972e0c23
19 changed files with 184 additions and 156 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/wireless/adm8211.h
View File

@ -266,7 +266,7 @@ do { \
#define ADM8211_SYNCTL_CS1 (1 << 28)
#define ADM8211_SYNCTL_CAL (1 << 27)
#define ADM8211_SYNCTL_SELCAL (1 << 26)
#define ADM8211_SYNCTL_RFtype ((1 << 24) || (1 << 23) || (1 << 22))
#define ADM8211_SYNCTL_RFtype ((1 << 24) | (1 << 23) | (1 << 22))
#define ADM8211_SYNCTL_RFMD (1 << 22)
#define ADM8211_SYNCTL_GENERAL (0x7 << 22)
/* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */

168
drivers/net/wireless/b43/b43.h
View File

@ -607,82 +607,7 @@ struct b43_qos_params {
struct ieee80211_tx_queue_params p;
};
struct b43_wldev;
/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
struct b43_wl {
/* Pointer to the active wireless device on this chip */
struct b43_wldev *current_dev;
/* Pointer to the ieee80211 hardware data structure */
struct ieee80211_hw *hw;
/* Global driver mutex. Every operation must run with this mutex locked. */
struct mutex mutex;
/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
* handler, only. This basically is just the IRQ mask register. */
spinlock_t hardirq_lock;
/* The number of queues that were registered with the mac80211 subsystem
* initially. This is a backup copy of hw->queues in case hw->queues has
* to be dynamically lowered at runtime (Firmware does not support QoS).
* hw->queues has to be restored to the original value before unregistering
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
struct ieee80211_vif *vif;
/* The MAC address of the operating interface. */
u8 mac_addr[ETH_ALEN];
/* Current BSSID */
u8 bssid[ETH_ALEN];
/* Interface type. (NL80211_IFTYPE_XXX) */
int if_type;
/* Is the card operating in AP, STA or IBSS mode? */
bool operating;
/* filter flags */
unsigned int filter_flags;
/* Stats about the wireless interface */
struct ieee80211_low_level_stats ieee_stats;
#ifdef CONFIG_B43_HWRNG
struct hwrng rng;
bool rng_initialized;
char rng_name[30 + 1];
#endif /* CONFIG_B43_HWRNG */
/* List of all wireless devices on this chip */
struct list_head devlist;
u8 nr_devs;
bool radiotap_enabled;
bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode). */
struct sk_buff *current_beacon;
bool beacon0_uploaded;
bool beacon1_uploaded;
bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues. */
struct b43_qos_params qos_params[4];
/* Work for adjustment of the transmission power.
* This is scheduled when we determine that the actual TX output
* power doesn't match what we want. */
struct work_struct txpower_adjust_work;
/* Packet transmit work */
struct work_struct tx_work;
/* Queue of packets to be transmitted. */
struct sk_buff_head tx_queue;
/* The device LEDs. */
struct b43_leds leds;
};
struct b43_wl;
/* The type of the firmware file. */
enum b43_firmware_file_type {
@ -824,6 +749,97 @@ struct b43_wldev {
#endif
};
/*
* Include goes here to avoid a dependency problem.
* A better fix would be to integrate xmit.h into b43.h.
*/
#include "xmit.h"
/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
struct b43_wl {
/* Pointer to the active wireless device on this chip */
struct b43_wldev *current_dev;
/* Pointer to the ieee80211 hardware data structure */
struct ieee80211_hw *hw;
/* Global driver mutex. Every operation must run with this mutex locked. */
struct mutex mutex;
/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
* handler, only. This basically is just the IRQ mask register. */
spinlock_t hardirq_lock;
/* The number of queues that were registered with the mac80211 subsystem
* initially. This is a backup copy of hw->queues in case hw->queues has
* to be dynamically lowered at runtime (Firmware does not support QoS).
* hw->queues has to be restored to the original value before unregistering
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
struct ieee80211_vif *vif;
/* The MAC address of the operating interface. */
u8 mac_addr[ETH_ALEN];
/* Current BSSID */
u8 bssid[ETH_ALEN];
/* Interface type. (NL80211_IFTYPE_XXX) */
int if_type;
/* Is the card operating in AP, STA or IBSS mode? */
bool operating;
/* filter flags */
unsigned int filter_flags;
/* Stats about the wireless interface */
struct ieee80211_low_level_stats ieee_stats;
#ifdef CONFIG_B43_HWRNG
struct hwrng rng;
bool rng_initialized;
char rng_name[30 + 1];
#endif /* CONFIG_B43_HWRNG */
/* List of all wireless devices on this chip */
struct list_head devlist;
u8 nr_devs;
bool radiotap_enabled;
bool radio_enabled;
/* The beacon we are currently using (AP or IBSS mode). */
struct sk_buff *current_beacon;
bool beacon0_uploaded;
bool beacon1_uploaded;
bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues. */
struct b43_qos_params qos_params[4];
/* Work for adjustment of the transmission power.
* This is scheduled when we determine that the actual TX output
* power doesn't match what we want. */
struct work_struct txpower_adjust_work;
/* Packet transmit work */
struct work_struct tx_work;
/* Queue of packets to be transmitted. */
struct sk_buff_head tx_queue;
/* The device LEDs. */
struct b43_leds leds;
#ifdef CONFIG_B43_PIO
/*
* RX/TX header/tail buffers used by the frame transmit functions.
*/
struct b43_rxhdr_fw4 rxhdr;
struct b43_txhdr txhdr;
u8 rx_tail[4];
u8 tx_tail[4];
#endif /* CONFIG_B43_PIO */
};
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
{
return hw->priv;

4
drivers/net/wireless/b43/leds.c
View File

@ -348,9 +348,9 @@ void b43_leds_register(struct b43_wldev *dev)
}
}
void b43_leds_unregister(struct b43_wldev *dev)
void b43_leds_unregister(struct b43_wl *wl)
{
struct b43_leds *leds = &dev->wl->leds;
struct b43_leds *leds = &wl->leds;
b43_unregister_led(&leds->led_tx);
b43_unregister_led(&leds->led_rx);

4
drivers/net/wireless/b43/leds.h
View File

@ -60,7 +60,7 @@ enum b43_led_behaviour {
};
void b43_leds_register(struct b43_wldev *dev);
void b43_leds_unregister(struct b43_wldev *dev);
void b43_leds_unregister(struct b43_wl *wl);
void b43_leds_init(struct b43_wldev *dev);
void b43_leds_exit(struct b43_wldev *dev);
void b43_leds_stop(struct b43_wldev *dev);
@ -76,7 +76,7 @@ struct b43_leds {
static inline void b43_leds_register(struct b43_wldev *dev)
{
}
static inline void b43_leds_unregister(struct b43_wldev *dev)
static inline void b43_leds_unregister(struct b43_wl *wl)
{
}
static inline void b43_leds_init(struct b43_wldev *dev)

7
drivers/net/wireless/b43/main.c
View File

@ -3874,6 +3874,7 @@ static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
struct b43_wldev *orig_dev;
u32 mask;
redo:
if (!dev || b43_status(dev) < B43_STAT_STARTED)
@ -3920,7 +3921,8 @@ redo:
goto redo;
return dev;
}
B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK));
mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
B43_WARN_ON(mask != 0xFFFFFFFF && mask);
/* Drain the TX queue */
while (skb_queue_len(&wl->tx_queue))
@ -4499,6 +4501,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
cancel_work_sync(&(wl->beacon_update_trigger));
wiphy_rfkill_stop_polling(hw->wiphy);
mutex_lock(&wl->mutex);
if (b43_status(dev) >= B43_STAT_STARTED) {
dev = b43_wireless_core_stop(dev);
@ -4997,7 +5000,7 @@ static void b43_remove(struct ssb_device *dev)
if (list_empty(&wl->devlist)) {
b43_rng_exit(wl);
b43_leds_unregister(wldev);
b43_leds_unregister(wl);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/

78
drivers/net/wireless/b43/pio.c
View File

@ -331,6 +331,7 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q,
unsigned int data_len)
{
struct b43_wldev *dev = q->dev;
struct b43_wl *wl = dev->wl;
const u8 *data = _data;
ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI;
@ -340,13 +341,12 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q,
q->mmio_base + B43_PIO_TXDATA,
sizeof(u16));
if (data_len & 1) {
u8 tail[2] = { 0, };
/* Write the last byte. */
ctl &= ~B43_PIO_TXCTL_WRITEHI;
b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
tail[0] = data[data_len - 1];
ssb_block_write(dev->dev, tail, 2,
wl->tx_tail[0] = data[data_len - 1];
wl->tx_tail[1] = 0;
ssb_block_write(dev->dev, wl->tx_tail, 2,
q->mmio_base + B43_PIO_TXDATA,
sizeof(u16));
}
@ -381,6 +381,7 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q,
unsigned int data_len)
{
struct b43_wldev *dev = q->dev;
struct b43_wl *wl = dev->wl;
const u8 *data = _data;
ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 |
@ -391,29 +392,31 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q,
q->mmio_base + B43_PIO8_TXDATA,
sizeof(u32));
if (data_len & 3) {
u8 tail[4] = { 0, };
wl->tx_tail[3] = 0;
/* Write the last few bytes. */
ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
B43_PIO8_TXCTL_24_31);
switch (data_len & 3) {
case 3:
ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
tail[0] = data[data_len - 3];
tail[1] = data[data_len - 2];
tail[2] = data[data_len - 1];
wl->tx_tail[0] = data[data_len - 3];
wl->tx_tail[1] = data[data_len - 2];
wl->tx_tail[2] = data[data_len - 1];
break;
case 2:
ctl |= B43_PIO8_TXCTL_8_15;
tail[0] = data[data_len - 2];
tail[1] = data[data_len - 1];
wl->tx_tail[0] = data[data_len - 2];
wl->tx_tail[1] = data[data_len - 1];
wl->tx_tail[2] = 0;
break;
case 1:
tail[0] = data[data_len - 1];
wl->tx_tail[0] = data[data_len - 1];
wl->tx_tail[1] = 0;
wl->tx_tail[2] = 0;
break;
}
b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
ssb_block_write(dev->dev, tail, 4,
ssb_block_write(dev->dev, wl->tx_tail, 4,
q->mmio_base + B43_PIO8_TXDATA,
sizeof(u32));
}
@ -445,8 +448,9 @@ static void pio_tx_frame_4byte_queue(struct b43_pio_txpacket *pack,
static int pio_tx_frame(struct b43_pio_txqueue *q,
struct sk_buff *skb)
{
struct b43_wldev *dev = q->dev;
struct b43_wl *wl = dev->wl;
struct b43_pio_txpacket *pack;
struct b43_txhdr txhdr;
u16 cookie;
int err;
unsigned int hdrlen;
@ -457,8 +461,8 @@ static int pio_tx_frame(struct b43_pio_txqueue *q,
struct b43_pio_txpacket, list);
cookie = generate_cookie(q, pack);
hdrlen = b43_txhdr_size(q->dev);
err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
hdrlen = b43_txhdr_size(dev);
err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
info, cookie);
if (err)
return err;
@ -466,15 +470,15 @@ static int pio_tx_frame(struct b43_pio_txqueue *q,
if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
/* Tell the firmware about the cookie of the last
* mcast frame, so it can clear the more-data bit in it. */
b43_shm_write16(q->dev, B43_SHM_SHARED,
b43_shm_write16(dev, B43_SHM_SHARED,
B43_SHM_SH_MCASTCOOKIE, cookie);
}
pack->skb = skb;
if (q->rev >= 8)
pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen);
pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
else
pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen);
pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
/* Remove it from the list of available packet slots.
* It will be put back when we receive the status report. */
@ -614,14 +618,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev,
static bool pio_rx_frame(struct b43_pio_rxqueue *q)
{
struct b43_wldev *dev = q->dev;
struct b43_rxhdr_fw4 rxhdr;
struct b43_wl *wl = dev->wl;
u16 len;
u32 macstat;
unsigned int i, padding;
struct sk_buff *skb;
const char *err_msg = NULL;
memset(&rxhdr, 0, sizeof(rxhdr));
memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
/* Check if we have data and wait for it to get ready. */
if (q->rev >= 8) {
@ -659,16 +663,16 @@ data_ready:
/* Get the preamble (RX header) */
if (q->rev >= 8) {
ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
} else {
ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
}
/* Sanity checks. */
len = le16_to_cpu(rxhdr.frame_len);
len = le16_to_cpu(wl->rxhdr.frame_len);
if (unlikely(len > 0x700)) {
err_msg = "len > 0x700";
goto rx_error;
@ -678,7 +682,7 @@ data_ready:
goto rx_error;
}
macstat = le32_to_cpu(rxhdr.mac_status);
macstat = le32_to_cpu(wl->rxhdr.mac_status);
if (macstat & B43_RX_MAC_FCSERR) {
if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
/* Drop frames with failed FCS. */
@ -703,24 +707,22 @@ data_ready:
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
if (len & 3) {
u8 tail[4] = { 0, };
/* Read the last few bytes. */
ssb_block_read(dev->dev, tail, 4,
ssb_block_read(dev->dev, wl->rx_tail, 4,
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
switch (len & 3) {
case 3:
skb->data[len + padding - 3] = tail[0];
skb->data[len + padding - 2] = tail[1];
skb->data[len + padding - 1] = tail[2];
skb->data[len + padding - 3] = wl->rx_tail[0];
skb->data[len + padding - 2] = wl->rx_tail[1];
skb->data[len + padding - 1] = wl->rx_tail[2];
break;
case 2:
skb->data[len + padding - 2] = tail[0];
skb->data[len + padding - 1] = tail[1];
skb->data[len + padding - 2] = wl->rx_tail[0];
skb->data[len + padding - 1] = wl->rx_tail[1];
break;
case 1:
skb->data[len + padding - 1] = tail[0];
skb->data[len + padding - 1] = wl->rx_tail[0];
break;
}
}
@ -729,17 +731,15 @@ data_ready:
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
if (len & 1) {
u8 tail[2] = { 0, };
/* Read the last byte. */
ssb_block_read(dev->dev, tail, 2,
ssb_block_read(dev->dev, wl->rx_tail, 2,
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
skb->data[len + padding - 1] = tail[0];
skb->data[len + padding - 1] = wl->rx_tail[0];
}
}
b43_rx(q->dev, skb, &rxhdr);
b43_rx(q->dev, skb, &wl->rxhdr);
return 1;

2
drivers/net/wireless/b43/xmit.c
View File

@ -27,7 +27,7 @@
*/
#include "xmit.h"
#include "b43.h"
#include "phy_common.h"
#include "dma.h"
#include "pio.h"

2
drivers/net/wireless/iwlwifi/iwl-3945-rs.c
View File

@ -702,7 +702,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
u8 sta_id = iwl_find_station(priv, hdr->addr1);
if (sta_id == IWL_INVALID_STATION) {
IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
hdr->addr1);
sta_id = iwl_add_station(priv, hdr->addr1, false,
CMD_ASYNC, NULL);

2
drivers/net/wireless/iwlwifi/iwl-3945.c
View File

@ -610,7 +610,7 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
if (rx_status.band == IEEE80211_BAND_5GHZ)
rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
/* set the preamble flag if appropriate */

2
drivers/net/wireless/iwlwifi/iwl-5000.c
View File

@ -317,7 +317,7 @@ static void iwl5000_gain_computation(struct iwl_priv *priv,
(s32)average_noise[i])) / 1500;
/* bound gain by 2 bits value max, 3rd bit is sign */
data->delta_gain_code[i] =
min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
if (delta_g < 0)
/* set negative sign */

2
drivers/net/wireless/iwlwifi/iwl-commands.h
View File

@ -1154,7 +1154,7 @@ struct iwl_wep_cmd {
#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0)
#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0
#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)

23
drivers/net/wireless/iwlwifi/iwl-eeprom.c
View File

@ -410,7 +410,6 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
u16 *validblockaddr)
{
u16 next_link_addr = 0, link_value = 0, valid_addr;
int ret = 0;
int usedblocks = 0;
/* set addressing mode to absolute to traverse the link list */
@ -430,29 +429,29 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
* check for more block on the link list
*/
valid_addr = next_link_addr;
next_link_addr = link_value;
next_link_addr = link_value * sizeof(u16);
IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
usedblocks, next_link_addr);
if (iwl_read_otp_word(priv, next_link_addr, &link_value))
return -EINVAL;
if (!link_value) {
/*
* reach the end of link list,
* reach the end of link list, return success and
* set address point to the starting address
* of the image
*/
goto done;
*validblockaddr = valid_addr;
/* skip first 2 bytes (link list pointer) */
*validblockaddr += 2;
return 0;
}
/* more in the link list, continue */
usedblocks++;
} while (usedblocks < priv->cfg->max_ll_items);
/* OTP full, use last block */
IWL_DEBUG_INFO(priv, "OTP is full, use last block\n");
done:
*validblockaddr = valid_addr;
/* skip first 2 bytes (link list pointer) */
*validblockaddr += 2;
return ret;
} while (usedblocks <= priv->cfg->max_ll_items);
/* OTP has no valid blocks */
IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
return -EINVAL;
}
/**

20
drivers/net/wireless/iwlwifi/iwl-eeprom.h
View File

@ -220,35 +220,35 @@ struct iwl_eeprom_enhanced_txpwr {
* Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
*/
/* 2.4 GHz band: CCK */
#define EEPROM_LB_CCK_20_COMMON ((0xAA)\
#define EEPROM_LB_CCK_20_COMMON ((0xA8)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */
/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
#define EEPROM_LB_OFDM_COMMON ((0xB2)\
#define EEPROM_LB_OFDM_COMMON ((0xB0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
#define EEPROM_HB_OFDM_COMMON ((0xCA)\
#define EEPROM_HB_OFDM_COMMON ((0xC8)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
/* 2.4GHz band channels:
* 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
#define EEPROM_LB_OFDM_20_BAND ((0xE2)\
#define EEPROM_LB_OFDM_20_BAND ((0xE0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */
/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
#define EEPROM_LB_OFDM_HT40_BAND ((0x122)\
#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */
/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
#define EEPROM_HB_OFDM_20_BAND ((0x14A)\
#define EEPROM_HB_OFDM_20_BAND ((0x148)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */
/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
#define EEPROM_HB_OFDM_HT40_BAND ((0x17A)\
#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
/* 2.4 GHz band, channnel 13: Legacy, HT */
#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x192)\
#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
/* 5.2 GHz band, channnel 140: Legacy, HT */
#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A2)\
#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B2)\
#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */

2
drivers/net/wireless/iwlwifi/iwl-rx.c
View File

@ -1044,7 +1044,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
* as a bitmask.
*/
rx_status.antenna =
le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK)
(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
>> RX_RES_PHY_FLAGS_ANTENNA_POS;
/* set the preamble flag if appropriate */

10
net/mac80211/rx.c
View File

@ -2164,11 +2164,17 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
skb = rx.skb;
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (rx.sdata && ieee80211_is_data(hdr->frame_control)) {
rx.flags |= IEEE80211_RX_RA_MATCH;
prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
if (prepares)
prev = rx.sdata;
} else list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!netif_running(sdata->dev))
continue;
if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
rx.flags |= IEEE80211_RX_RA_MATCH;

2
net/mac80211/sta_info.c
View File

@ -361,6 +361,7 @@ int sta_info_insert(struct sta_info *sta)
u.ap);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
sdata = sta->sdata;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
@ -496,6 +497,7 @@ static void __sta_info_unlink(struct sta_info **sta)
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
&(*sta)->sta);
sdata = (*sta)->sdata;
}
if (ieee80211_vif_is_mesh(&sdata->vif)) {

3
net/mac80211/tx.c
View File

@ -1704,7 +1704,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
if (!is_multicast_ether_addr(hdr.addr1)) {
rcu_read_lock();
sta = sta_info_get(local, hdr.addr1);
if (sta)
/* XXX: in the future, use sdata to look up the sta */
if (sta && sta->sdata == sdata)
sta_flags = get_sta_flags(sta);
rcu_read_unlock();
}

4
net/mac80211/util.c
View File

@ -339,7 +339,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local,
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (WARN_ON(!info->control.vif)) {
kfree(skb);
kfree_skb(skb);
return;
}
@ -367,7 +367,7 @@ int ieee80211_add_pending_skbs(struct ieee80211_local *local,
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (WARN_ON(!info->control.vif)) {
kfree(skb);
kfree_skb(skb);
continue;
}

3
net/wireless/nl80211.c
View File

@ -4029,7 +4029,7 @@ static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
rdev = cfg80211_get_dev_from_info(info);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
goto out;
goto out_rtnl;
}
net = get_net_ns_by_pid(pid);
@ -4049,6 +4049,7 @@ static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
put_net(net);
out:
cfg80211_unlock_rdev(rdev);
out_rtnl:
rtnl_unlock();
return err;
}