From 6590425218b9e8cedf6acd3dd903fb7a907937b7 Mon Sep 17 00:00:00 2001 From: Corentin Labbe Date: Thu, 18 Jan 2018 21:05:34 +0100 Subject: [PATCH] ata: remove pata_at32 Since AVR32 was removed, pata_at32 is unselectable/uncompilable. Remove this driver. Signed-off-by: Corentin Labbe Signed-off-by: Tejun Heo --- drivers/ata/Kconfig | 9 - drivers/ata/Makefile | 1 - drivers/ata/pata_at32.c | 400 ---------------------------------------- 3 files changed, 410 deletions(-) delete mode 100644 drivers/ata/pata_at32.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index b3fad5663aeb..a7120d621154 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -944,15 +944,6 @@ endif # ATA_BMDMA comment "PIO-only SFF controllers" -config PATA_AT32 - tristate "Atmel AVR32 PATA support (Experimental)" - depends on AVR32 && PLATFORM_AT32AP - help - This option enables support for the IDE devices on the - Atmel AT32AP platform. - - If unsure, say N. - config PATA_CMD640_PCI tristate "CMD640 PCI PATA support (Experimental)" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 8daec3e657f8..f1f5a3fbc777 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -96,7 +96,6 @@ obj-$(CONFIG_PATA_VIA) += pata_via.o obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o # SFF PIO only -obj-$(CONFIG_PATA_AT32) += pata_at32.o obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o obj-$(CONFIG_PATA_FALCON) += pata_falcon.o obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c deleted file mode 100644 index 9aeb7a6dd4d4..000000000000 --- a/drivers/ata/pata_at32.c +++ /dev/null @@ -1,400 +0,0 @@ -/* - * AVR32 SMC/CFC PATA Driver - * - * Copyright (C) 2007 Atmel Norway - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - */ - -#define DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define DRV_NAME "pata_at32" -#define DRV_VERSION "0.0.3" - -/* - * CompactFlash controller memory layout relative to the base address: - * - * Attribute memory: 0000 0000 -> 003f ffff - * Common memory: 0040 0000 -> 007f ffff - * I/O memory: 0080 0000 -> 00bf ffff - * True IDE Mode: 00c0 0000 -> 00df ffff - * Alt IDE Mode: 00e0 0000 -> 00ff ffff - * - * Only True IDE and Alt True IDE mode are needed for this driver. - * - * True IDE mode => CS0 = 0, CS1 = 1 (cmd, error, stat, etc) - * Alt True IDE mode => CS0 = 1, CS1 = 0 (ctl, alt_stat) - */ -#define CF_IDE_OFFSET 0x00c00000 -#define CF_ALT_IDE_OFFSET 0x00e00000 -#define CF_RES_SIZE 2048 - -/* - * Define DEBUG_BUS if you are doing debugging of your own EBI -> PATA - * adaptor with a logic analyzer or similar. - */ -#undef DEBUG_BUS - -/* - * ATA PIO modes - * - * Name | Mb/s | Min cycle time | Mask - * --------+-------+----------------+-------- - * Mode 0 | 3.3 | 600 ns | 0x01 - * Mode 1 | 5.2 | 383 ns | 0x03 - * Mode 2 | 8.3 | 240 ns | 0x07 - * Mode 3 | 11.1 | 180 ns | 0x0f - * Mode 4 | 16.7 | 120 ns | 0x1f - * - * Alter PIO_MASK below according to table to set maximal PIO mode. - */ -enum { - PIO_MASK = ATA_PIO4, -}; - -/* - * Struct containing private information about device. - */ -struct at32_ide_info { - unsigned int irq; - struct resource res_ide; - struct resource res_alt; - void __iomem *ide_addr; - void __iomem *alt_addr; - unsigned int cs; - struct smc_config smc; -}; - -/* - * Setup SMC for the given ATA timing. - */ -static int pata_at32_setup_timing(struct device *dev, - struct at32_ide_info *info, - const struct ata_timing *ata) -{ - struct smc_config *smc = &info->smc; - struct smc_timing timing; - - int active; - int recover; - - memset(&timing, 0, sizeof(struct smc_timing)); - - /* Total cycle time */ - timing.read_cycle = ata->cyc8b; - - /* DIOR <= CFIOR timings */ - timing.nrd_setup = ata->setup; - timing.nrd_pulse = ata->act8b; - timing.nrd_recover = ata->rec8b; - - /* Convert nanosecond timing to clock cycles */ - smc_set_timing(smc, &timing); - - /* Add one extra cycle setup due to signal ring */ - smc->nrd_setup = smc->nrd_setup + 1; - - active = smc->nrd_setup + smc->nrd_pulse; - recover = smc->read_cycle - active; - - /* Need at least two cycles recovery */ - if (recover < 2) - smc->read_cycle = active + 2; - - /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ - smc->ncs_read_setup = 1; - smc->ncs_read_pulse = smc->read_cycle - 2; - - /* Write timings same as read timings */ - smc->write_cycle = smc->read_cycle; - smc->nwe_setup = smc->nrd_setup; - smc->nwe_pulse = smc->nrd_pulse; - smc->ncs_write_setup = smc->ncs_read_setup; - smc->ncs_write_pulse = smc->ncs_read_pulse; - - /* Do some debugging output of ATA and SMC timings */ - dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n", - ata->cyc8b, ata->setup, ata->act8b, ata->rec8b); - - dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n", - smc->read_cycle, smc->nrd_setup, smc->nrd_pulse, - smc->ncs_read_setup, smc->ncs_read_pulse); - - /* Finally, configure the SMC */ - return smc_set_configuration(info->cs, smc); -} - -/* - * Procedures for libATA. - */ -static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing timing; - struct at32_ide_info *info = ap->host->private_data; - - int ret; - - /* Compute ATA timing */ - ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); - if (ret) { - dev_warn(ap->dev, "Failed to compute ATA timing %d\n", ret); - return; - } - - /* Setup SMC to ATA timing */ - ret = pata_at32_setup_timing(ap->dev, info, &timing); - if (ret) { - dev_warn(ap->dev, "Failed to setup ATA timing %d\n", ret); - return; - } -} - -static struct scsi_host_template at32_sht = { - ATA_PIO_SHT(DRV_NAME), -}; - -static struct ata_port_operations at32_port_ops = { - .inherits = &ata_sff_port_ops, - .cable_detect = ata_cable_40wire, - .set_piomode = pata_at32_set_piomode, -}; - -static int __init pata_at32_init_one(struct device *dev, - struct at32_ide_info *info) -{ - struct ata_host *host; - struct ata_port *ap; - - host = ata_host_alloc(dev, 1); - if (!host) - return -ENOMEM; - - ap = host->ports[0]; - - /* Setup ATA bindings */ - ap->ops = &at32_port_ops; - ap->pio_mask = PIO_MASK; - ap->flags |= ATA_FLAG_SLAVE_POSS; - - /* - * Since all 8-bit taskfile transfers has to go on the lower - * byte of the data bus and there is a bug in the SMC that - * makes it impossible to alter the bus width during runtime, - * we need to hardwire the address signals as follows: - * - * A_IDE(2:0) <= A_EBI(3:1) - * - * This makes all addresses on the EBI even, thus all data - * will be on the lower byte of the data bus. All addresses - * used by libATA need to be altered according to this. - */ - ap->ioaddr.altstatus_addr = info->alt_addr + (0x06 << 1); - ap->ioaddr.ctl_addr = info->alt_addr + (0x06 << 1); - - ap->ioaddr.data_addr = info->ide_addr + (ATA_REG_DATA << 1); - ap->ioaddr.error_addr = info->ide_addr + (ATA_REG_ERR << 1); - ap->ioaddr.feature_addr = info->ide_addr + (ATA_REG_FEATURE << 1); - ap->ioaddr.nsect_addr = info->ide_addr + (ATA_REG_NSECT << 1); - ap->ioaddr.lbal_addr = info->ide_addr + (ATA_REG_LBAL << 1); - ap->ioaddr.lbam_addr = info->ide_addr + (ATA_REG_LBAM << 1); - ap->ioaddr.lbah_addr = info->ide_addr + (ATA_REG_LBAH << 1); - ap->ioaddr.device_addr = info->ide_addr + (ATA_REG_DEVICE << 1); - ap->ioaddr.status_addr = info->ide_addr + (ATA_REG_STATUS << 1); - ap->ioaddr.command_addr = info->ide_addr + (ATA_REG_CMD << 1); - - /* Set info as private data of ATA host */ - host->private_data = info; - - /* Register ATA device and return */ - return ata_host_activate(host, info->irq, ata_sff_interrupt, - IRQF_SHARED | IRQF_TRIGGER_RISING, - &at32_sht); -} - -/* - * This function may come in handy for people analyzing their own - * EBI -> PATA adaptors. - */ -#ifdef DEBUG_BUS - -static void __init pata_at32_debug_bus(struct device *dev, - struct at32_ide_info *info) -{ - const int d1 = 0xff; - const int d2 = 0x00; - - int i; - - /* Write 8-bit values (registers) */ - iowrite8(d1, info->alt_addr + (0x06 << 1)); - iowrite8(d2, info->alt_addr + (0x06 << 1)); - - for (i = 0; i < 8; i++) { - iowrite8(d1, info->ide_addr + (i << 1)); - iowrite8(d2, info->ide_addr + (i << 1)); - } - - /* Write 16 bit values (data) */ - iowrite16(d1, info->ide_addr); - iowrite16(d1 << 8, info->ide_addr); - - iowrite16(d1, info->ide_addr); - iowrite16(d1 << 8, info->ide_addr); -} - -#endif - -static int __init pata_at32_probe(struct platform_device *pdev) -{ - const struct ata_timing initial_timing = - {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; - - struct device *dev = &pdev->dev; - struct at32_ide_info *info; - struct ide_platform_data *board = dev_get_platdata(&pdev->dev); - struct resource *res; - - int irq; - int ret; - - if (!board) - return -ENXIO; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; - - /* Retrive IRQ */ - irq = platform_get_irq(pdev, 0); - if (irq < 0) - return irq; - - /* Setup struct containing private information */ - info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->irq = irq; - info->cs = board->cs; - - /* Request memory resources */ - info->res_ide.start = res->start + CF_IDE_OFFSET; - info->res_ide.end = info->res_ide.start + CF_RES_SIZE - 1; - info->res_ide.name = "ide"; - info->res_ide.flags = IORESOURCE_MEM; - - ret = request_resource(res, &info->res_ide); - if (ret) - goto err_req_res_ide; - - info->res_alt.start = res->start + CF_ALT_IDE_OFFSET; - info->res_alt.end = info->res_alt.start + CF_RES_SIZE - 1; - info->res_alt.name = "alt"; - info->res_alt.flags = IORESOURCE_MEM; - - ret = request_resource(res, &info->res_alt); - if (ret) - goto err_req_res_alt; - - /* Setup non-timing elements of SMC */ - info->smc.bus_width = 2; /* 16 bit data bus */ - info->smc.nrd_controlled = 1; /* Sample data on rising edge of NRD */ - info->smc.nwe_controlled = 0; /* Drive data on falling edge of NCS */ - info->smc.nwait_mode = 3; /* NWAIT is in READY mode */ - info->smc.byte_write = 0; /* Byte select access type */ - info->smc.tdf_mode = 0; /* TDF optimization disabled */ - info->smc.tdf_cycles = 0; /* No TDF wait cycles */ - - /* Setup SMC to ATA timing */ - ret = pata_at32_setup_timing(dev, info, &initial_timing); - if (ret) - goto err_setup_timing; - - /* Map ATA address space */ - ret = -ENOMEM; - info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16); - info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16); - if (!info->ide_addr || !info->alt_addr) - goto err_ioremap; - -#ifdef DEBUG_BUS - pata_at32_debug_bus(dev, info); -#endif - - /* Setup and register ATA device */ - ret = pata_at32_init_one(dev, info); - if (ret) - goto err_ata_device; - - return 0; - - err_ata_device: - err_ioremap: - err_setup_timing: - release_resource(&info->res_alt); - err_req_res_alt: - release_resource(&info->res_ide); - err_req_res_ide: - kfree(info); - - return ret; -} - -static int __exit pata_at32_remove(struct platform_device *pdev) -{ - struct ata_host *host = platform_get_drvdata(pdev); - struct at32_ide_info *info; - - if (!host) - return 0; - - info = host->private_data; - ata_host_detach(host); - - if (!info) - return 0; - - release_resource(&info->res_ide); - release_resource(&info->res_alt); - - kfree(info); - - return 0; -} - -/* work with hotplug and coldplug */ -MODULE_ALIAS("platform:at32_ide"); - -static struct platform_driver pata_at32_driver = { - .remove = __exit_p(pata_at32_remove), - .driver = { - .name = "at32_ide", - }, -}; - -module_platform_driver_probe(pata_at32_driver, pata_at32_probe); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("AVR32 SMC/CFC PATA Driver"); -MODULE_AUTHOR("Kristoffer Nyborg Gregertsen "); -MODULE_VERSION(DRV_VERSION);