diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index fd406273cb71..c34c217878b3 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -542,13 +542,6 @@ config SERIAL_S5PV210 help Serial port support for Samsung's S5P Family of SoC's -config SERIAL_MAX3107 - tristate "MAX3107 support" - depends on SPI && GPIOLIB - select SERIAL_CORE - default y - help - MAX3107 chip support config SERIAL_MAX3100 tristate "MAX3100 support" @@ -557,6 +550,22 @@ config SERIAL_MAX3100 help MAX3100 chip support +config SERIAL_MAX3107 + tristate "MAX3107 support" + depends on SPI + select SERIAL_CORE + help + MAX3107 chip support + +config SERIAL_MAX3107_AAVA + tristate "MAX3107 AAVA platform support" + depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB + select SERIAL_CORE + help + Support for the MAX3107 chip configuration found on the AAVA + platform. Includes the extra initialisation and GPIO support + neded for this device. + config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 4cd0c0694917..424067ac3347 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o +obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/max3107-aava.c b/drivers/serial/max3107-aava.c new file mode 100644 index 000000000000..a1fe304f2f52 --- /dev/null +++ b/drivers/serial/max3107-aava.c @@ -0,0 +1,344 @@ +/* + * max3107.c - spi uart protocol driver for Maxim 3107 + * Based on max3100.c + * by Christian Pellegrin + * and max3110.c + * by Feng Tang + * + * Copyright (C) Aavamobile 2009 + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "max3107.h" + +/* GPIO direction to input function */ +static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration register */ + buf[0] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to input */ + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO configuration register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO direction to output function */ +static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, + int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO configuration and data registers */ + buf[0] = MAX3107_GPIOCFG_REG; + buf[1] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + /* Set GPIO to output */ + buf[0] |= (0x0001 << offset); + /* Set value */ + if (value) + buf[1] |= (0x0001 << offset); + else + buf[1] &= ~(0x0001 << offset); + + /* Write new GPIO configuration and data register values */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); + buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO conf data w failed\n"); + return -EIO; + } + return 0; +} + +/* GPIO value query function */ +static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[1]; /* Buffer for SPI transfer */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return -EINVAL; + } + + /* Read current GPIO data register */ + buf[0] = MAX3107_GPIODATA_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { + dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); + return -EIO; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + + /* Return value */ + return buf[0] & (0x0001 << offset); +} + +/* GPIO value set function */ +static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct max3107_port *s = container_of(chip, struct max3107_port, chip); + u16 buf[2]; /* Buffer for SPI transfers */ + + if (offset >= MAX3107_GPIO_COUNT) { + dev_err(&s->spi->dev, "Invalid GPIO\n"); + return; + } + + /* Read current GPIO configuration registers*/ + buf[0] = MAX3107_GPIODATA_REG; + buf[1] = MAX3107_GPIOCFG_REG; + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { + dev_err(&s->spi->dev, + "SPI transfer for GPIO data and config read failed\n"); + return; + } + buf[0] &= MAX3107_SPI_RX_DATA_MASK; + buf[1] &= MAX3107_SPI_RX_DATA_MASK; + + if (!(buf[1] & (0x0001 << offset))) { + /* Configured as input, can't set value */ + dev_warn(&s->spi->dev, + "Trying to set value for input GPIO\n"); + return; + } + + /* Set value */ + if (value) + buf[0] |= (0x0001 << offset); + else + buf[0] &= ~(0x0001 << offset); + + /* Write new GPIO data register value */ + buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); + /* Perform SPI transfer */ + if (max3107_rw(s, (u8 *)buf, NULL, 2)) + dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); +} + +/* GPIO chip data */ +static struct gpio_chip max3107_gpio_chip = { + .owner = THIS_MODULE, + .direction_input = max3107_gpio_direction_in, + .direction_output = max3107_gpio_direction_out, + .get = max3107_gpio_get, + .set = max3107_gpio_set, + .can_sleep = 1, + .base = MAX3107_GPIO_BASE, + .ngpio = MAX3107_GPIO_COUNT, +}; + +/** + * max3107_aava_reset - reset on AAVA systems + * @spi: The SPI device we are probing + * + * Reset the device ready for probing. + */ + +static int max3107_aava_reset(struct spi_device *spi) +{ + /* Reset the chip */ + if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { + pr_err("Requesting RESET GPIO failed\n"); + return -EIO; + } + if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { + pr_err("Setting RESET GPIO to 0 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + msleep(MAX3107_RESET_DELAY); + if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { + pr_err("Setting RESET GPIO to 1 failed\n"); + gpio_free(MAX3107_RESET_GPIO); + return -EIO; + } + gpio_free(MAX3107_RESET_GPIO); + msleep(MAX3107_WAKEUP_DELAY); + return 0; +} + +static int max3107_aava_configure(struct max3107_port *s) +{ + int retval; + + /* Initialize GPIO chip data */ + s->chip = max3107_gpio_chip; + s->chip.label = s->spi->modalias; + s->chip.dev = &s->spi->dev; + + /* Add GPIO chip */ + retval = gpiochip_add(&s->chip); + if (retval) { + dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); + return retval; + } + + /* Temporary fix for EV2 boot problems, set modem reset to 0 */ + max3107_gpio_direction_out(&s->chip, 3, 0); + return 0; +} + +#if 0 +/* This will get enabled once we have the board stuff merged for this + specific case */ + +static const struct baud_table brg13_ext[] = { + { 300, MAX3107_BRG13_B300 }, + { 600, MAX3107_BRG13_B600 }, + { 1200, MAX3107_BRG13_B1200 }, + { 2400, MAX3107_BRG13_B2400 }, + { 4800, MAX3107_BRG13_B4800 }, + { 9600, MAX3107_BRG13_B9600 }, + { 19200, MAX3107_BRG13_B19200 }, + { 57600, MAX3107_BRG13_B57600 }, + { 115200, MAX3107_BRG13_B115200 }, + { 230400, MAX3107_BRG13_B230400 }, + { 460800, MAX3107_BRG13_B460800 }, + { 921600, MAX3107_BRG13_B921600 }, + { 0, 0 } +}; + +static void max3107_aava_init(struct max3107_port *s) +{ + /*override for AAVA SC specific*/ + if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { + if (get_koski_build_id() <= KOSKI_EV2) + if (s->ext_clk) { + s->brg_cfg = MAX3107_BRG13_B9600; + s->baud_tbl = (struct baud_table *)brg13_ext; + } + } +} +#endif + +static int __devexit max3107_aava_remove(struct spi_device *spi) +{ + struct max3107_port *s = dev_get_drvdata(&spi->dev); + + /* Remove GPIO chip */ + if (gpiochip_remove(&s->chip)) + dev_warn(&spi->dev, "Removing GPIO chip failed\n"); + + /* Then do the default remove */ + return max3107_remove(spi); +} + +/* Platform data */ +static struct max3107_plat aava_plat_data = { + .loopback = 0, + .ext_clk = 1, +/* .init = max3107_aava_init, */ + .configure = max3107_aava_configure, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, +}; + + +static int __devinit max3107_probe_aava(struct spi_device *spi) +{ + int err = max3107_aava_reset(spi); + if (err < 0) + return err; + return max3107_probe(spi, &aava_plat_data); +} + +/* Spi driver data */ +static struct spi_driver max3107_driver = { + .driver = { + .name = "aava-max3107", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = max3107_probe_aava, + .remove = __devexit_p(max3107_aava_remove), + .suspend = max3107_suspend, + .resume = max3107_resume, +}; + +/* Driver init function */ +static int __init max3107_init(void) +{ + return spi_register_driver(&max3107_driver); +} + +/* Driver exit function */ +static void __exit max3107_exit(void) +{ + spi_unregister_driver(&max3107_driver); +} + +module_init(max3107_init); +module_exit(max3107_exit); + +MODULE_DESCRIPTION("MAX3107 driver"); +MODULE_AUTHOR("Aavamobile"); +MODULE_ALIAS("aava-max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.c b/drivers/serial/max3107.c index a96ddd388ffd..67283c1a57ff 100644 --- a/drivers/serial/max3107.c +++ b/drivers/serial/max3107.c @@ -31,98 +31,12 @@ #include #include #include +#include #include #include -#include -#include -#include -#include #include "max3107.h" -struct baud_table { - int baud; - u32 new_brg; -}; - -struct max3107_port { - /* UART port structure */ - struct uart_port port; - - /* SPI device structure */ - struct spi_device *spi; - - /* GPIO chip stucture */ - struct gpio_chip chip; - - /* Workqueue that does all the magic */ - struct workqueue_struct *workqueue; - struct work_struct work; - - /* Lock for shared data */ - spinlock_t data_lock; - - /* Device configuration */ - int ext_clk; /* 1 if external clock used */ - int loopback; /* Current loopback mode state */ - int baud; /* Current baud rate */ - - /* State flags */ - int suspended; /* Indicates suspend mode */ - int tx_fifo_empty; /* Flag for TX FIFO state */ - int rx_enabled; /* Flag for receiver state */ - int tx_enabled; /* Flag for transmitter state */ - - u16 irqen_reg; /* Current IRQ enable register value */ - /* Shared data */ - u16 mode1_reg; /* Current mode1 register value*/ - int mode1_commit; /* Flag for setting new mode1 register value */ - u16 lcr_reg; /* Current LCR register value */ - int lcr_commit; /* Flag for setting new LCR register value */ - u32 brg_cfg; /* Current Baud rate generator config */ - int brg_commit; /* Flag for setting new baud rate generator - * config - */ - struct baud_table *baud_tbl; - int handle_irq; /* Indicates that IRQ should be handled */ - - /* Rx buffer and str*/ - u16 *rxbuf; - u8 *rxstr; - /* Tx buffer*/ - u16 *txbuf; -}; - -/* Platform data structure */ -struct max3107_plat { - /* Loopback mode enable */ - int loopback; - /* External clock enable */ - int ext_clk; - /* HW suspend function */ - void (*max3107_hw_suspend) (struct max3107_port *s, int suspend); - /* Polling mode enable */ - int polled_mode; - /* Polling period if polling mode enabled */ - int poll_time; -}; - -static struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static struct baud_table brg26_ext[] = { +static const struct baud_table brg26_ext[] = { { 300, MAX3107_BRG26_B300 }, { 600, MAX3107_BRG26_B600 }, { 1200, MAX3107_BRG26_B1200 }, @@ -138,7 +52,7 @@ static struct baud_table brg26_ext[] = { { 0, 0 } }; -static struct baud_table brg13_int[] = { +static const struct baud_table brg13_int[] = { { 300, MAX3107_BRG13_IB300 }, { 600, MAX3107_BRG13_IB600 }, { 1200, MAX3107_BRG13_IB1200 }, @@ -157,7 +71,7 @@ static struct baud_table brg13_int[] = { static u32 get_new_brg(int baud, struct max3107_port *s) { int i; - struct baud_table *baud_tbl = s->baud_tbl; + const struct baud_table *baud_tbl = s->baud_tbl; for (i = 0; i < 13; i++) { if (baud == baud_tbl[i].baud) @@ -168,7 +82,7 @@ static u32 get_new_brg(int baud, struct max3107_port *s) } /* Perform SPI transfer for write/read of device register(s) */ -static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) +int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) { struct spi_message spi_msg; struct spi_transfer spi_xfer; @@ -213,6 +127,7 @@ static int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len) #endif return 0; } +EXPORT_SYMBOL_GPL(max3107_rw); /* Puts received data to circular buffer */ static void put_data_to_circ_buf(struct max3107_port *s, unsigned char *data, @@ -611,16 +526,10 @@ static void max3107_register_init(struct max3107_port *s) s->brg_cfg = MAX3107_BRG13_IB9600; s->baud_tbl = (struct baud_table *)brg13_int; } -#if 0 - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -#endif + + if (s->pdata->init) + s->pdata->init(s); + buf[0] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVMSB_REG) | ((s->brg_cfg >> 16) & MAX3107_SPI_TX_DATA_MASK); buf[1] = (MAX3107_WRITE_BIT | MAX3107_BRGDIVLSB_REG) @@ -734,7 +643,7 @@ static irqreturn_t max3107_irq(int irqno, void *dev_id) * used but that would mess the GPIOs * */ -static void max3107_hw_susp(struct max3107_port *s, int suspend) +void max3107_hw_susp(struct max3107_port *s, int suspend) { pr_debug("enter, suspend %d\n", suspend); @@ -752,6 +661,7 @@ static void max3107_hw_susp(struct max3107_port *s, int suspend) max3107_set_sleep(s, MAX3107_DISABLE_AUTOSLEEP); } } +EXPORT_SYMBOL_GPL(max3107_hw_susp); /* Modem status IRQ enabling */ static void max3107_enable_ms(struct uart_port *port) @@ -899,10 +809,8 @@ static void max3107_shutdown(struct uart_port *port) { struct max3107_port *s = container_of(port, struct max3107_port, port); - if (s->suspended) { - /* Resume HW */ - max3107_hw_susp(s, 0); - } + if (s->suspended && s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); /* Free the interrupt */ free_irq(s->spi->irq, s); @@ -915,7 +823,8 @@ static void max3107_shutdown(struct uart_port *port) } /* Suspend HW */ - max3107_hw_susp(s, 1); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); } /* Port startup function */ @@ -941,7 +850,8 @@ static int max3107_startup(struct uart_port *port) } /* Resume HW */ - max3107_hw_susp(s, 0); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); /* Init registers */ max3107_register_init(s); @@ -973,16 +883,14 @@ static int max3107_request_port(struct uart_port *port) static void max3107_config_port(struct uart_port *port, int flags) { struct max3107_port *s = container_of(port, struct max3107_port, port); - - /* Use PORT_MAX3100 since we are at least int the same series */ - s->port.type = PORT_MAX3100; + s->port.type = PORT_MAX3107; } /* Port verify function */ static int max3107_verify_port(struct uart_port *port, struct serial_struct *ser) { - if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3107) return 0; return -EINVAL; @@ -1000,157 +908,6 @@ static void max3107_break_ctl(struct uart_port *port, int break_state) /* We don't support break control, do nothing */ } -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* Platform data */ -static struct max3107_plat max3107_plat_data = { - .loopback = 0, - .ext_clk = 1, - .max3107_hw_suspend = &max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; /* Port functions */ static struct uart_ops max3107_ops = { @@ -1180,52 +937,48 @@ static struct uart_driver max3107_uart_driver = { .nr = 1, }; -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, +static int driver_registered = 0; + + + +/* 'Generic' platform data */ +static struct max3107_plat generic_plat_data = { + .loopback = 0, + .ext_clk = 1, + .hw_suspend = max3107_hw_susp, + .polled_mode = 0, + .poll_time = 0, }; -/* Device probe function */ -static int __devinit max3107_probe(struct spi_device *spi) + + +/*******************************************************************/ + +/** + * max3107_probe - SPI bus probe entry point + * @spi: the spi device + * + * SPI wants us to probe this device and if appropriate claim it. + * Perform any platform specific requirements and then initialise + * the device. + */ + +int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata) { struct max3107_port *s; - struct max3107_plat *pdata = &max3107_plat_data; u16 buf[2]; /* Buffer for SPI transfers */ int retval; pr_info("enter max3107 probe\n"); - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - /* Allocate port structure */ s = kzalloc(sizeof(*s), GFP_KERNEL); if (!s) { pr_err("Allocating port structure failed\n"); return -ENOMEM; } + + s->pdata = pdata; + /* SPI Rx buffer * +2 for RX FIFO interrupt * disabling and RX level query @@ -1298,10 +1051,13 @@ static int __devinit max3107_probe(struct spi_device *spi) } /* Register UART driver */ - retval = uart_register_driver(&max3107_uart_driver); - if (retval) { - dev_err(&s->spi->dev, "Registering UART driver failed\n"); - return retval; + if (!driver_registered) { + retval = uart_register_driver(&max3107_uart_driver); + if (retval) { + dev_err(&s->spi->dev, "Registering UART driver failed\n"); + return retval; + } + driver_registered = 1; } /* Initialize UART port data */ @@ -1312,8 +1068,7 @@ static int __devinit max3107_probe(struct spi_device *spi) s->port.uartclk = 9600; s->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; s->port.irq = s->spi->irq; - /* Use PORT_MAX3100 since we are at least in the same series */ - s->port.type = PORT_MAX3100; + s->port.type = PORT_MAX3107; /* Add UART port */ retval = uart_add_one_port(&max3107_uart_driver, &s->port); @@ -1322,44 +1077,31 @@ static int __devinit max3107_probe(struct spi_device *spi) return retval; } - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = spi->modalias; - s->chip.dev = &spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; + if (pdata->configure) { + retval = pdata->configure(s); + if (retval < 0) + return retval; } - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - /* Go to suspend mode */ - max3107_hw_susp(s, 1); + if (pdata->hw_suspend) + pdata->hw_suspend(s, 1); return 0; } +EXPORT_SYMBOL_GPL(max3107_probe); /* Driver remove function */ -static int __devexit max3107_remove(struct spi_device *spi) +int max3107_remove(struct spi_device *spi) { struct max3107_port *s = dev_get_drvdata(&spi->dev); pr_info("enter max3107 remove\n"); - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&s->spi->dev, "Removing GPIO chip failed\n"); - /* Remove port */ if (uart_remove_one_port(&max3107_uart_driver, &s->port)) dev_warn(&s->spi->dev, "Removing UART port failed\n"); - /* Unregister UART driver */ - uart_unregister_driver(&max3107_uart_driver); /* Free TxRx buffer */ kfree(s->rxbuf); @@ -1371,9 +1113,10 @@ static int __devexit max3107_remove(struct spi_device *spi) return 0; } +EXPORT_SYMBOL_GPL(max3107_remove); /* Driver suspend function */ -static int max3107_suspend(struct spi_device *spi, pm_message_t state) +int max3107_suspend(struct spi_device *spi, pm_message_t state) { #ifdef CONFIG_PM struct max3107_port *s = dev_get_drvdata(&spi->dev); @@ -1384,13 +1127,15 @@ static int max3107_suspend(struct spi_device *spi, pm_message_t state) uart_suspend_port(&max3107_uart_driver, &s->port); /* Go to suspend mode */ - max3107_hw_susp(s, 1); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 1); #endif /* CONFIG_PM */ return 0; } +EXPORT_SYMBOL_GPL(max3107_suspend); /* Driver resume function */ -static int max3107_resume(struct spi_device *spi) +int max3107_resume(struct spi_device *spi) { #ifdef CONFIG_PM struct max3107_port *s = dev_get_drvdata(&spi->dev); @@ -1398,13 +1143,20 @@ static int max3107_resume(struct spi_device *spi) pr_debug("enter resume\n"); /* Resume from suspend */ - max3107_hw_susp(s, 0); + if (s->pdata->hw_suspend) + s->pdata->hw_suspend(s, 0); /* Resume UART port */ uart_resume_port(&max3107_uart_driver, &s->port); #endif /* CONFIG_PM */ return 0; } +EXPORT_SYMBOL_GPL(max3107_resume); + +static int max3107_probe_generic(struct spi_device *spi) +{ + return max3107_probe(spi, &generic_plat_data); +} /* Spi driver data */ static struct spi_driver max3107_driver = { @@ -1413,7 +1165,7 @@ static struct spi_driver max3107_driver = { .bus = &spi_bus_type, .owner = THIS_MODULE, }, - .probe = max3107_probe, + .probe = max3107_probe_generic, .remove = __devexit_p(max3107_remove), .suspend = max3107_suspend, .resume = max3107_resume, @@ -1430,6 +1182,9 @@ static int __init max3107_init(void) static void __exit max3107_exit(void) { pr_info("enter max3107 exit\n"); + /* Unregister UART driver */ + if (driver_registered) + uart_unregister_driver(&max3107_uart_driver); spi_unregister_driver(&max3107_driver); } @@ -1438,5 +1193,5 @@ module_exit(max3107_exit); MODULE_DESCRIPTION("MAX3107 driver"); MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("max3107-spi-uart"); -MODULE_LICENSE("GPLv2"); +MODULE_ALIAS("max3107-spi"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/serial/max3107.h b/drivers/serial/max3107.h index a5625d1f263d..72b30415f417 100644 --- a/drivers/serial/max3107.h +++ b/drivers/serial/max3107.h @@ -10,8 +10,8 @@ * (at your option) any later version. */ -#ifndef _LINUX_SERIAL_MAX3107_H -#define _LINUX_SERIAL_MAX3107_H +#ifndef _MAX3107_H +#define _MAX3107_H /* Serial error status definitions */ #define MAX3107_PARITY_ERROR 1 @@ -355,4 +355,85 @@ #define MAX3107_BRG13_IB460800 (0x000000 | 0x00) #define MAX3107_BRG13_IB921600 (0x000000 | 0x00) + +struct baud_table { + int baud; + u32 new_brg; +}; + +struct max3107_port { + /* UART port structure */ + struct uart_port port; + + /* SPI device structure */ + struct spi_device *spi; + + /* GPIO chip stucture */ + struct gpio_chip chip; + + /* Workqueue that does all the magic */ + struct workqueue_struct *workqueue; + struct work_struct work; + + /* Lock for shared data */ + spinlock_t data_lock; + + /* Device configuration */ + int ext_clk; /* 1 if external clock used */ + int loopback; /* Current loopback mode state */ + int baud; /* Current baud rate */ + + /* State flags */ + int suspended; /* Indicates suspend mode */ + int tx_fifo_empty; /* Flag for TX FIFO state */ + int rx_enabled; /* Flag for receiver state */ + int tx_enabled; /* Flag for transmitter state */ + + u16 irqen_reg; /* Current IRQ enable register value */ + /* Shared data */ + u16 mode1_reg; /* Current mode1 register value*/ + int mode1_commit; /* Flag for setting new mode1 register value */ + u16 lcr_reg; /* Current LCR register value */ + int lcr_commit; /* Flag for setting new LCR register value */ + u32 brg_cfg; /* Current Baud rate generator config */ + int brg_commit; /* Flag for setting new baud rate generator + * config + */ + struct baud_table *baud_tbl; + int handle_irq; /* Indicates that IRQ should be handled */ + + /* Rx buffer and str*/ + u16 *rxbuf; + u8 *rxstr; + /* Tx buffer*/ + u16 *txbuf; + + struct max3107_plat *pdata; /* Platform data */ +}; + +/* Platform data structure */ +struct max3107_plat { + /* Loopback mode enable */ + int loopback; + /* External clock enable */ + int ext_clk; + /* Called during the register initialisation */ + void (*init)(struct max3107_port *s); + /* Called when the port is found and configured */ + int (*configure)(struct max3107_port *s); + /* HW suspend function */ + void (*hw_suspend) (struct max3107_port *s, int suspend); + /* Polling mode enable */ + int polled_mode; + /* Polling period if polling mode enabled */ + int poll_time; +}; + +extern int max3107_rw(struct max3107_port *s, u8 *tx, u8 *rx, int len); +extern void max3107_hw_susp(struct max3107_port *s, int suspend); +extern int max3107_probe(struct spi_device *spi, struct max3107_plat *pdata); +extern int max3107_remove(struct spi_device *spi); +extern int max3107_suspend(struct spi_device *spi, pm_message_t state); +extern int max3107_resume(struct spi_device *spi); + #endif /* _LINUX_SERIAL_MAX3107_H */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 32928161fab6..9ddc866ccc09 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -186,6 +186,10 @@ #define PORT_ALTERA_JTAGUART 91 #define PORT_ALTERA_UART 92 +/* MAX3107 */ +#define PORT_MAX3107 94 + + #ifdef __KERNEL__ #include