hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux into for-armsoc

This commit is contained in:
Russell King 2012-02-22 22:04:41 +00:00
parent a5f17d1f4c 230f984662
commit 61b80086a5
313 changed files with 2006 additions and 2871 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
Documentation/DocBook/device-drivers.tmpl
View File

@ -102,9 +102,12 @@ X!Iinclude/linux/kobject.h
!Iinclude/linux/device.h
</sect1>
<sect1><title>Device Drivers Base</title>
!Idrivers/base/init.c
!Edrivers/base/driver.c
!Edrivers/base/core.c
!Edrivers/base/syscore.c
!Edrivers/base/class.c
!Idrivers/base/node.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
<!-- Cannot be included, because
@ -113,13 +116,18 @@ X!Iinclude/linux/kobject.h
exceed allowed 44 characters maximum
X!Edrivers/base/attribute_container.c
-->
!Edrivers/base/sys.c
!Edrivers/base/dd.c
<!--
X!Edrivers/base/interface.c
-->
!Iinclude/linux/platform_device.h
!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
<sect1><title>Device Drivers DMA Management</title>
!Edrivers/base/dma-buf.c
!Edrivers/base/dma-coherent.c
!Edrivers/base/dma-mapping.c
</sect1>
<sect1><title>Device Drivers Power Management</title>
!Edrivers/base/power/main.c
@ -219,7 +227,7 @@ X!Isound/sound_firmware.c
<chapter id="uart16x50">
<title>16x50 UART Driver</title>
!Edrivers/tty/serial/serial_core.c
!Edrivers/tty/serial/8250.c
!Edrivers/tty/serial/8250/8250.c
</chapter>
<chapter id="fbdev">

72
Documentation/input/event-codes.txt
View File

@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in
class/input/event*/device/capabilities/, and the properties of a device are
provided in class/input/event*/device/properties.
Types:
==========
Types are groupings of codes under a logical input construct. Each type has a
set of applicable codes to be used in generating events. See the Codes section
for details on valid codes for each type.
Event types:
===========
Event types are groupings of codes under a logical input construct. Each
type has a set of applicable codes to be used in generating events. See the
Codes section for details on valid codes for each type.
* EV_SYN:
- Used as markers to separate events. Events may be separated in time or in
@ -63,9 +63,9 @@ for details on valid codes for each type.
* EV_FF_STATUS:
- Used to receive force feedback device status.
Codes:
==========
Codes define the precise type of event.
Event codes:
===========
Event codes define the precise type of event.
EV_SYN:
----------
@ -220,6 +220,56 @@ EV_PWR:
EV_PWR events are a special type of event used specifically for power
mangement. Its usage is not well defined. To be addressed later.
Device properties:
=================
Normally, userspace sets up an input device based on the data it emits,
i.e., the event types. In the case of two devices emitting the same event
types, additional information can be provided in the form of device
properties.
INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
--------------------------------------
The INPUT_PROP_DIRECT property indicates that device coordinates should be
directly mapped to screen coordinates (not taking into account trivial
transformations, such as scaling, flipping and rotating). Non-direct input
devices require non-trivial transformation, such as absolute to relative
transformation for touchpads. Typical direct input devices: touchscreens,
drawing tablets; non-direct devices: touchpads, mice.
The INPUT_PROP_POINTER property indicates that the device is not transposed
on the screen and thus requires use of an on-screen pointer to trace user's
movements. Typical pointer devices: touchpads, tablets, mice; non-pointer
device: touchscreen.
If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
considered undefined and the device type should be deduced in the
traditional way, using emitted event types.
INPUT_PROP_BUTTONPAD:
--------------------
For touchpads where the button is placed beneath the surface, such that
pressing down on the pad causes a button click, this property should be
set. Common in clickpad notebooks and macbooks from 2009 and onwards.
Originally, the buttonpad property was coded into the bcm5974 driver
version field under the name integrated button. For backwards
compatibility, both methods need to be checked in userspace.
INPUT_PROP_SEMI_MT:
------------------
Some touchpads, most common between 2008 and 2011, can detect the presence
of multiple contacts without resolving the individual positions; only the
number of contacts and a rectangular shape is known. For such
touchpads, the semi-mt property should be set.
Depending on the device, the rectangle may enclose all touches, like a
bounding box, or just some of them, for instance the two most recent
touches. The diversity makes the rectangle of limited use, but some
gestures can normally be extracted from it.
If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
device.
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.
@ -240,6 +290,8 @@ used to report when a touch is active on the screen.
BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
contact. BTN_TOOL_<name> events should be reported where possible.
For new hardware, INPUT_PROP_DIRECT should be set.
Trackpads:
----------
Legacy trackpads that only provide relative position information must report
@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active
on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
be used to report the number of touches active on the trackpad.
For new hardware, INPUT_PROP_POINTER should be set.
Tablets:
----------
BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
purpose on the device.
For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.

2
Documentation/sysctl/kernel.txt
View File

@ -601,6 +601,8 @@ can be ORed together:
instead of using the one provided by the hardware.
512 - A kernel warning has occurred.
1024 - A module from drivers/staging was loaded.
2048 - The system is working around a severe firmware bug.
4096 - An out-of-tree module has been loaded.
==============================================================

50
MAINTAINERS
View File

@ -159,7 +159,7 @@ S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@suse.de>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
@ -789,12 +789,6 @@ F: arch/arm/mach-mx*/
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
ARM/FREESCALE IMX51
M: Amit Kucheria <amit.kucheria@canonical.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mx5/
ARM/FREESCALE IMX6
M: Shawn Guo <shawn.guo@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1783,9 +1777,9 @@ X: net/wireless/wext*
CHAR and MISC DRIVERS
M: Arnd Bergmann <arnd@arndb.de>
M: Greg Kroah-Hartman <greg@kroah.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
S: Maintained
S: Supported
F: drivers/char/*
F: drivers/misc/*
@ -2287,7 +2281,7 @@ F: drivers/acpi/dock.c
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
L: linux-doc@vger.kernel.org
T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
T: quilt http://xenotime.net/kernel-doc-patches/current/
S: Maintained
F: Documentation/
@ -2320,7 +2314,7 @@ F: lib/lru_cache.c
F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
@ -3992,11 +3986,11 @@ M: Rusty Russell <rusty@rustcorp.com.au>
L: lguest@lists.ozlabs.org
W: http://lguest.ozlabs.org/
S: Odd Fixes
F: Documentation/virtual/lguest/
F: arch/x86/include/asm/lguest*.h
F: arch/x86/lguest/
F: drivers/lguest/
F: include/linux/lguest*.h
F: arch/x86/include/asm/lguest*.h
F: tools/lguest/
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras <paulus@au.ibm.com>
@ -4136,7 +4130,7 @@ L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
F: Documentation/ldm.txt
F: fs/partitions/ldm.*
F: block/partitions/ldm.*
LogFS
M: Joern Engel <joern@logfs.org>
@ -5633,7 +5627,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: arch/s390/
F: drivers/s390/
F: fs/partitions/ibm.c
F: block/partitions/ibm.c
F: Documentation/s390/
F: Documentation/DocBook/s390*
@ -6276,15 +6270,15 @@ S: Maintained
F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
M: Greg Kroah-Hartman <greg@kroah.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: stable@vger.kernel.org
S: Maintained
S: Supported
STAGING SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
L: devel@driverdev.osuosl.org
S: Maintained
S: Supported
F: drivers/staging/
STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@ -6396,11 +6390,6 @@ M: Omar Ramirez Luna <omar.ramirez@ti.com>
S: Odd Fixes
F: drivers/staging/tidspbridge/
STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
L: linux-media@vger.kernel.org
S: Odd Fixes
F: drivers/staging/tm6000/
STAGING - USB ENE SM/MS CARD READER DRIVER
M: Al Cho <acho@novell.com>
S: Odd Fixes
@ -6669,8 +6658,8 @@ S: Maintained
K: ^Subject:.*(?i)trivial
TTY LAYER
M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/tty/
F: drivers/tty/serial/serial_core.c
@ -6958,7 +6947,7 @@ S: Maintained
F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
M: Greg Kroah-Hartman <gregkh@suse.de>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/usb-serial.txt
@ -6973,9 +6962,8 @@ S: Maintained
F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
M: Greg Kroah-Hartman <greg@kroah.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
W: http://www.kroah.com/linux/
S: Maintained
F: drivers/usb/serial/*keyspan*
@ -7003,7 +6991,7 @@ F: Documentation/video4linux/sn9c102.txt
F: drivers/media/video/sn9c102/
USB SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@ -7090,7 +7078,7 @@ F: fs/hppfs/
USERSPACE I/O (UIO)
M: "Hans J. Koch" <hjk@hansjkoch.de>
M: Greg Kroah-Hartman <gregkh@suse.de>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 3
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc3
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

6
arch/arm/Kconfig
View File

@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
config FIQ
bool
config NEED_RET_TO_USER
bool
config ARCH_MTD_XIP
bool
@ -479,6 +482,7 @@ config ARCH_IOP13XX
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
select NEED_MACH_MEMORY_H
select NEED_RET_TO_USER
help
Support for Intel's IOP13XX (XScale) family of processors.
@ -486,6 +490,7 @@ config ARCH_IOP32X
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB
@ -497,6 +502,7 @@ config ARCH_IOP33X
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB

8
arch/arm/include/asm/hardware/entry-macro-iomd.S
View File

@ -11,14 +11,6 @@
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
.macro disable_fiq
mov r12, #ioc_base_high
.if ioc_base_low
orr r12, r12, #ioc_base_low
.endif
strb r12, [r12, #0x38] @ Disable FIQ register
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first
ldr \tmp, =irq_prio_h

10
arch/arm/include/asm/tlb.h
View File

@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long addr)
{
pgtable_page_dtor(pte);
tlb_add_flush(tlb, addr);
/*
* With the classic ARM MMU, a pte page has two corresponding pmd
* entries, each covering 1MB.
*/
addr &= PMD_MASK;
tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
tlb_add_flush(tlb, addr + SZ_1M);
tlb_remove_page(tlb, pte);
}

5
arch/arm/kernel/entry-armv.S
View File

@ -19,7 +19,9 @@
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
#ifndef CONFIG_MULTI_IRQ_HANDLER
#include <mach/entry-macro.S>
#endif
#include <asm/thread_notify.h>
#include <asm/unwind.h>
#include <asm/unistd.h>
@ -790,7 +792,7 @@ __kuser_cmpxchg64: @ 0xffff0f60
smp_dmb arm
rsbs r0, r3, #0 @ set returned val and C flag
ldmfd sp!, {r4, r5, r6, r7}
bx lr
usr_ret lr
#elif !defined(CONFIG_SMP)
@ -1101,7 +1103,6 @@ __stubs_start:
* get out of that mode without clobbering one register.
*/
vector_fiq:
disable_fiq
subs pc, lr, #4
/*=============================================================================

8
arch/arm/kernel/entry-common.S
View File

@ -10,9 +10,15 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
#include <mach/entry-macro.S>
#include <asm/unwind.h>
#ifdef CONFIG_NEED_RET_TO_USER
#include <mach/entry-macro.S>
#else
.macro arch_ret_to_user, tmp1, tmp2
.endm
#endif
#include "entry-header.S"

28
arch/arm/kernel/perf_event_v7.c
View File

@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(NODE)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
};
/*
@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
[C(NODE)] = {
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_WRITE)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
[C(OP_PREFETCH)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
};
/*

8
arch/arm/kernel/ptrace.c
View File

@ -699,10 +699,13 @@ static int vfp_set(struct task_struct *target,
{
int ret;
struct thread_info *thread = task_thread_info(target);
struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
struct vfp_hard_struct new_vfp;
const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
vfp_sync_hwstate(thread);
new_vfp = thread->vfpstate.hard;
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&new_vfp.fpregs,
user_fpregs_offset,
@ -723,9 +726,8 @@ static int vfp_set(struct task_struct *target,
if (ret)
return ret;
vfp_sync_hwstate(thread);
thread->vfpstate.hard = new_vfp;
vfp_flush_hwstate(thread);
thread->vfpstate.hard = new_vfp;
return 0;
}

5
arch/arm/kernel/signal.c
View File

@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
vfp_flush_hwstate(thread);
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
if (!err)
vfp_flush_hwstate(thread);
return err ? -EFAULT : 0;
}

6
arch/arm/mach-at91/include/mach/entry-macro.S
View File

@ -13,17 +13,11 @@
#include <mach/hardware.h>
#include <mach/at91_aic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number

2
arch/arm/mach-bcmring/arch.c
View File

@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING")
.init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
.init_machine = bcmring_init_machine
.init_machine = bcmring_init_machine,
.restart = bcmring_restart,
MACHINE_END

812
arch/arm/mach-bcmring/dma.c
View File

@ -33,17 +33,11 @@
#include <mach/timer.h>
#include <linux/mm.h>
#include <linux/pfn.h>
#include <linux/atomic.h>
#include <linux/sched.h>
#include <mach/dma.h>
/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
/* especially since dc4 doesn't use kmalloc'd memory. */
#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
/* ---- Public Variables ------------------------------------------------- */
/* ---- Private Constants and Types -------------------------------------- */
@ -53,58 +47,18 @@
#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
#define DMA_MAP_DEBUG 0
#if DMA_MAP_DEBUG
# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
#else
# define DMA_MAP_PRINT(fmt, args...)
#endif
/* ---- Private Variables ------------------------------------------------ */
static DMA_Global_t gDMA;
static struct proc_dir_entry *gDmaDir;
static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
#include "dma_device.c"
/* ---- Private Function Prototypes -------------------------------------- */
/* ---- Functions ------------------------------------------------------- */
/****************************************************************************/
/**
* Displays information for /proc/dma/mem-type
*/
/****************************************************************************/
static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
int count, int *eof, void *data)
{
int len = 0;
len += sprintf(buf + len, "dma_map_mem statistics\n");
len +=
sprintf(buf + len, "coherent: %d\n",
atomic_read(&gDmaStatMemTypeCoherent));
len +=
sprintf(buf + len, "kmalloc: %d\n",
atomic_read(&gDmaStatMemTypeKmalloc));
len +=
sprintf(buf + len, "vmalloc: %d\n",
atomic_read(&gDmaStatMemTypeVmalloc));
len +=
sprintf(buf + len, "user: %d\n",
atomic_read(&gDmaStatMemTypeUser));
return len;
}
/****************************************************************************/
/**
* Displays information for /proc/dma/channels
@ -846,8 +800,6 @@ int dma_init(void)
dma_proc_read_channels, NULL);
create_proc_read_entry("devices", 0, gDmaDir,
dma_proc_read_devices, NULL);
create_proc_read_entry("mem-type", 0, gDmaDir,
dma_proc_read_mem_type, NULL);
}
out:
@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for.
}
EXPORT_SYMBOL(dma_set_device_handler);
/****************************************************************************/
/**
* Initializes a memory mapping structure
*/
/****************************************************************************/
int dma_init_mem_map(DMA_MemMap_t *memMap)
{
memset(memMap, 0, sizeof(*memMap));
sema_init(&memMap->lock, 1);
return 0;
}
EXPORT_SYMBOL(dma_init_mem_map);
/****************************************************************************/
/**
* Releases any memory currently being held by a memory mapping structure.
*/
/****************************************************************************/
int dma_term_mem_map(DMA_MemMap_t *memMap)
{
down(&memMap->lock); /* Just being paranoid */
/* Free up any allocated memory */
up(&memMap->lock);
memset(memMap, 0, sizeof(*memMap));
return 0;
}
EXPORT_SYMBOL(dma_term_mem_map);
/****************************************************************************/
/**
* Looks at a memory address and categorizes it.
*
* @return One of the values from the DMA_MemType_t enumeration.
*/
/****************************************************************************/
DMA_MemType_t dma_mem_type(void *addr)
{
unsigned long addrVal = (unsigned long)addr;
if (addrVal >= CONSISTENT_BASE) {
/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
/* dma_alloc_xxx pages are physically and virtually contiguous */
return DMA_MEM_TYPE_DMA;
}
/* Technically, we could add one more classification. Addresses between VMALLOC_END */
/* and the beginning of the DMA virtual address could be considered to be I/O space. */
/* Right now, nobody cares about this particular classification, so we ignore it. */
if (is_vmalloc_addr(addr)) {
/* Address comes from the vmalloc'd region. Pages are virtually */
/* contiguous but NOT physically contiguous */
return DMA_MEM_TYPE_VMALLOC;
}
if (addrVal >= PAGE_OFFSET) {
/* PAGE_OFFSET is typically 0xC0000000 */
/* kmalloc'd pages are physically contiguous */
return DMA_MEM_TYPE_KMALLOC;
}
return DMA_MEM_TYPE_USER;
}
EXPORT_SYMBOL(dma_mem_type);
/****************************************************************************/
/**
* Looks at a memory address and determines if we support DMA'ing to/from
* that type of memory.
*
* @return boolean -
* return value != 0 means dma supported
* return value == 0 means dma not supported
*/
/****************************************************************************/
int dma_mem_supports_dma(void *addr)
{
DMA_MemType_t memType = dma_mem_type(addr);
return (memType == DMA_MEM_TYPE_DMA)
#if ALLOW_MAP_OF_KMALLOC_MEMORY
|| (memType == DMA_MEM_TYPE_KMALLOC)
#endif
|| (memType == DMA_MEM_TYPE_USER);
}
EXPORT_SYMBOL(dma_mem_supports_dma);
/****************************************************************************/
/**
* Maps in a memory region such that it can be used for performing a DMA.
*
* @return
*/
/****************************************************************************/
int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
enum dma_data_direction dir /* Direction that the mapping will be going */
) {
int rc;
down(&memMap->lock);
DMA_MAP_PRINT("memMap: %p\n", memMap);
if (memMap->inUse) {
printk(KERN_ERR "%s: memory map %p is already being used\n",
__func__, memMap);
rc = -EBUSY;
goto out;
}
memMap->inUse = 1;
memMap->dir = dir;
memMap->numRegionsUsed = 0;
rc = 0;
out:
DMA_MAP_PRINT("returning %d", rc);
up(&memMap->lock);
return rc;
}
EXPORT_SYMBOL(dma_map_start);
/****************************************************************************/
/**
* Adds a segment of memory to a memory map. Each segment is both
* physically and virtually contiguous.
*
* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
DMA_Region_t *region, /* Region that the segment belongs to */
void *virtAddr, /* Virtual address of the segment being added */
dma_addr_t physAddr, /* Physical address of the segment being added */
size_t numBytes /* Number of bytes of the segment being added */
) {
DMA_Segment_t *segment;
DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
physAddr, numBytes);
/* Sanity check */
if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
|| (((unsigned long)virtAddr + numBytes)) >
((unsigned long)region->virtAddr + region->numBytes)) {
printk(KERN_ERR
"%s: virtAddr %p is outside region @ %p len: %d\n",
__func__, virtAddr, region->virtAddr, region->numBytes);
return -EINVAL;
}
if (region->numSegmentsUsed > 0) {
/* Check to see if this segment is physically contiguous with the previous one */
segment = &region->segment[region->numSegmentsUsed - 1];
if ((segment->physAddr + segment->numBytes) == physAddr) {
/* It is - just add on to the end */
DMA_MAP_PRINT("appending %d bytes to last segment\n",
numBytes);
segment->numBytes += numBytes;
return 0;
}
}
/* Reallocate to hold more segments, if required. */
if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
DMA_Segment_t *newSegment;
size_t oldSize =
region->numSegmentsAllocated * sizeof(*newSegment);
int newAlloc = region->numSegmentsAllocated + 4;
size_t newSize = newAlloc * sizeof(*newSegment);
newSegment = kmalloc(newSize, GFP_KERNEL);
if (newSegment == NULL) {
return -ENOMEM;
}
memcpy(newSegment, region->segment, oldSize);
memset(&((uint8_t *) newSegment)[oldSize], 0,
newSize - oldSize);
kfree(region->segment);
region->numSegmentsAllocated = newAlloc;
region->segment = newSegment;
}
segment = &region->segment[region->numSegmentsUsed];
region->numSegmentsUsed++;
segment->virtAddr = virtAddr;
segment->physAddr = physAddr;
segment->numBytes = numBytes;
DMA_MAP_PRINT("returning success\n");
return 0;
}
/****************************************************************************/
/**
* Adds a region of memory to a memory map. Each region is virtually
* contiguous, but not necessarily physically contiguous.
*
* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
void *mem, /* Virtual address that we want to get a map of */
size_t numBytes /* Number of bytes being mapped */
) {
unsigned long addr = (unsigned long)mem;
unsigned int offset;
int rc = 0;
DMA_Region_t *region;
dma_addr_t physAddr;
down(&memMap->lock);
DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
if (!memMap->inUse) {
printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
__func__);
rc = -EINVAL;
goto out;
}
/* Reallocate to hold more regions. */
if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
DMA_Region_t *newRegion;
size_t oldSize =
memMap->numRegionsAllocated * sizeof(*newRegion);
int newAlloc = memMap->numRegionsAllocated + 4;
size_t newSize = newAlloc * sizeof(*newRegion);
newRegion = kmalloc(newSize, GFP_KERNEL);
if (newRegion == NULL) {
rc = -ENOMEM;
goto out;
}
memcpy(newRegion, memMap->region, oldSize);
memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
kfree(memMap->region);
memMap->numRegionsAllocated = newAlloc;
memMap->region = newRegion;
}
region = &memMap->region[memMap->numRegionsUsed];
memMap->numRegionsUsed++;
offset = addr & ~PAGE_MASK;
region->memType = dma_mem_type(mem);
region->virtAddr = mem;
region->numBytes = numBytes;
region->numSegmentsUsed = 0;
region->numLockedPages = 0;
region->lockedPages = NULL;
switch (region->memType) {
case DMA_MEM_TYPE_VMALLOC:
{
atomic_inc(&gDmaStatMemTypeVmalloc);
/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
/* vmalloc'd pages are not physically contiguous */
rc = -EINVAL;
break;
}
case DMA_MEM_TYPE_KMALLOC:
{
atomic_inc(&gDmaStatMemTypeKmalloc);
/* kmalloc'd pages are physically contiguous, so they'll have exactly */
/* one segment */
#if ALLOW_MAP_OF_KMALLOC_MEMORY
physAddr =
dma_map_single(NULL, mem, numBytes, memMap->dir);
rc = dma_map_add_segment(memMap, region, mem, physAddr,
numBytes);
#else
rc = -EINVAL;
#endif
break;
}
case DMA_MEM_TYPE_DMA:
{
/* dma_alloc_xxx pages are physically contiguous */
atomic_inc(&gDmaStatMemTypeCoherent);
physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
dma_sync_single_for_cpu(NULL, physAddr, numBytes,
memMap->dir);
rc = dma_map_add_segment(memMap, region, mem, physAddr,
numBytes);
break;
}
case DMA_MEM_TYPE_USER:
{
size_t firstPageOffset;
size_t firstPageSize;
struct page **pages;
struct task_struct *userTask;
atomic_inc(&gDmaStatMemTypeUser);
#if 1
/* If the pages are user pages, then the dma_mem_map_set_user_task function */
/* must have been previously called. */
if (memMap->userTask == NULL) {
printk(KERN_ERR
"%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
__func__);
return -EINVAL;
}
/* User pages need to be locked. */
firstPageOffset =
(unsigned long)region->virtAddr & (PAGE_SIZE - 1);
firstPageSize = PAGE_SIZE - firstPageOffset;
region->numLockedPages = (firstPageOffset
+ region->numBytes +
PAGE_SIZE - 1) / PAGE_SIZE;
pages =
kmalloc(region->numLockedPages *
sizeof(struct page *), GFP_KERNEL);
if (pages == NULL) {
region->numLockedPages = 0;
return -ENOMEM;
}
userTask = memMap->userTask;
down_read(&userTask->mm->mmap_sem);
rc = get_user_pages(userTask, /* task */
userTask->mm, /* mm */
(unsigned long)region->virtAddr, /* start */
region->numLockedPages, /* len */
memMap->dir == DMA_FROM_DEVICE, /* write */
0, /* force */
pages, /* pages (array of pointers to page) */
NULL); /* vmas */
up_read(&userTask->mm->mmap_sem);
if (rc != region->numLockedPages) {
kfree(pages);
region->numLockedPages = 0;
if (rc >= 0) {
rc = -EINVAL;
}
} else {
uint8_t *virtAddr = region->virtAddr;
size_t bytesRemaining;
int pageIdx;
rc = 0; /* Since get_user_pages returns +ve number */
region->lockedPages = pages;
/* We've locked the user pages. Now we need to walk them and figure */
/* out the physical addresses. */
/* The first page may be partial */
dma_map_add_segment(memMap,
region,
virtAddr,
PFN_PHYS(page_to_pfn
(pages[0])) +
firstPageOffset,
firstPageSize);
virtAddr += firstPageSize;
bytesRemaining =
region->numBytes - firstPageSize;
for (pageIdx = 1;
pageIdx < region->numLockedPages;
pageIdx++) {
size_t bytesThisPage =
(bytesRemaining >
PAGE_SIZE ? PAGE_SIZE :
bytesRemaining);
DMA_MAP_PRINT
("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
pageIdx, pages[pageIdx],
page_to_pfn(pages[pageIdx]),
PFN_PHYS(page_to_pfn
(pages[pageIdx])));
dma_map_add_segment(memMap,
region,
virtAddr,
PFN_PHYS(page_to_pfn
(pages
[pageIdx])),
bytesThisPage);
virtAddr += bytesThisPage;
bytesRemaining -= bytesThisPage;
}
}
#else
printk(KERN_ERR
"%s: User mode pages are not yet supported\n",
__func__);
/* user pages are not physically contiguous */
rc = -EINVAL;
#endif
break;
}
default:
{
printk(KERN_ERR "%s: Unsupported memory type: %d\n",
__func__, region->memType);
rc = -EINVAL;
break;
}
}
if (rc != 0) {
memMap->numRegionsUsed--;
}
out:
DMA_MAP_PRINT("returning %d\n", rc);
up(&memMap->lock);
return rc;
}
EXPORT_SYMBOL(dma_map_add_segment);
/****************************************************************************/
/**
* Maps in a memory region such that it can be used for performing a DMA.
*
* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
void *mem, /* Virtual address that we want to get a map of */
size_t numBytes, /* Number of bytes being mapped */
enum dma_data_direction dir /* Direction that the mapping will be going */
) {
int rc;
rc = dma_map_start(memMap, dir);
if (rc == 0) {
rc = dma_map_add_region(memMap, mem, numBytes);
if (rc < 0) {
/* Since the add fails, this function will fail, and the caller won't */
/* call unmap, so we need to do it here. */
dma_unmap(memMap, 0);
}
}
return rc;
}
EXPORT_SYMBOL(dma_map_mem);
/****************************************************************************/
/**
* Setup a descriptor ring for a given memory map.
*
* It is assumed that the descriptor ring has already been initialized, and
* this routine will only reallocate a new descriptor ring if the existing
* one is too small.
*
* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
DMA_MemMap_t *memMap, /* Memory map that will be used */
dma_addr_t devPhysAddr /* Physical address of device */
) {
int rc;
int numDescriptors;
DMA_DeviceAttribute_t *devAttr;
DMA_Region_t *region;
DMA_Segment_t *segment;
dma_addr_t srcPhysAddr;
dma_addr_t dstPhysAddr;
int regionIdx;
int segmentIdx;
devAttr = &DMA_gDeviceAttribute[dev];
down(&memMap->lock);
/* Figure out how many descriptors we need */
numDescriptors = 0;
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
segmentIdx++) {
segment = &region->segment[segmentIdx];
if (memMap->dir == DMA_TO_DEVICE) {
srcPhysAddr = segment->physAddr;
dstPhysAddr = devPhysAddr;
} else {
srcPhysAddr = devPhysAddr;
dstPhysAddr = segment->physAddr;
}
rc =
dma_calculate_descriptor_count(dev, srcPhysAddr,
dstPhysAddr,
segment->
numBytes);
if (rc < 0) {
printk(KERN_ERR
"%s: dma_calculate_descriptor_count failed: %d\n",
__func__, rc);
goto out;
}
numDescriptors += rc;
}
}
/* Adjust the size of the ring, if it isn't big enough */
if (numDescriptors > devAttr->ring.descriptorsAllocated) {
dma_free_descriptor_ring(&devAttr->ring);
rc =
dma_alloc_descriptor_ring(&devAttr->ring,
numDescriptors);
if (rc < 0) {
printk(KERN_ERR
"%s: dma_alloc_descriptor_ring failed: %d\n",
__func__, rc);
goto out;
}
} else {
rc =
dma_init_descriptor_ring(&devAttr->ring,
numDescriptors);
if (rc < 0) {
printk(KERN_ERR
"%s: dma_init_descriptor_ring failed: %d\n",
__func__, rc);
goto out;
}
}
/* Populate the descriptors */
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
segmentIdx++) {
segment = &region->segment[segmentIdx];
if (memMap->dir == DMA_TO_DEVICE) {
srcPhysAddr = segment->physAddr;
dstPhysAddr = devPhysAddr;
} else {
srcPhysAddr = devPhysAddr;
dstPhysAddr = segment->physAddr;
}
rc =
dma_add_descriptors(&devAttr->ring, dev,
srcPhysAddr, dstPhysAddr,
segment->numBytes);
if (rc < 0) {
printk(KERN_ERR
"%s: dma_add_descriptors failed: %d\n",
__func__, rc);
goto out;
}
}
}
rc = 0;
out:
up(&memMap->lock);
return rc;
}
EXPORT_SYMBOL(dma_map_create_descriptor_ring);
/****************************************************************************/
/**
* Maps in a memory region such that it can be used for performing a DMA.
*
* @return
*/
/****************************************************************************/
int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
int dirtied /* non-zero if any of the pages were modified */
) {
int rc = 0;
int regionIdx;
int segmentIdx;
DMA_Region_t *region;
DMA_Segment_t *segment;
down(&memMap->lock);
for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
region = &memMap->region[regionIdx];
for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
segmentIdx++) {
segment = &region->segment[segmentIdx];
switch (region->memType) {
case DMA_MEM_TYPE_VMALLOC:
{
printk(KERN_ERR
"%s: vmalloc'd pages are not yet supported\n",
__func__);
rc = -EINVAL;
goto out;
}
case DMA_MEM_TYPE_KMALLOC:
{
#if ALLOW_MAP_OF_KMALLOC_MEMORY
dma_unmap_single(NULL,
segment->physAddr,
segment->numBytes,
memMap->dir);
#endif
break;
}
case DMA_MEM_TYPE_DMA:
{
dma_sync_single_for_cpu(NULL,
segment->
physAddr,
segment->
numBytes,
memMap->dir);
break;
}
case DMA_MEM_TYPE_USER:
{
/* Nothing to do here. */
break;
}
default:
{
printk(KERN_ERR
"%s: Unsupported memory type: %d\n",
__func__, region->memType);
rc = -EINVAL;
goto out;
}
}
segment->virtAddr = NULL;
segment->physAddr = 0;
segment->numBytes = 0;
}
if (region->numLockedPages > 0) {
int pageIdx;
/* Some user pages were locked. We need to go and unlock them now. */
for (pageIdx = 0; pageIdx < region->numLockedPages;
pageIdx++) {
struct page *page =
region->lockedPages[pageIdx];
if (memMap->dir == DMA_FROM_DEVICE) {
SetPageDirty(page);
}
page_cache_release(page);
}
kfree(region->lockedPages);
region->numLockedPages = 0;
region->lockedPages = NULL;
}
region->memType = DMA_MEM_TYPE_NONE;
region->virtAddr = NULL;
region->numBytes = 0;
region->numSegmentsUsed = 0;
}
memMap->userTask = NULL;
memMap->numRegionsUsed = 0;
memMap->inUse = 0;
out:
up(&memMap->lock);
return rc;
}
EXPORT_SYMBOL(dma_unmap);

196
arch/arm/mach-bcmring/include/mach/dma.h
View File

@ -26,15 +26,9 @@
/* ---- Include Files ---------------------------------------------------- */
#include <linux/kernel.h>
#include <linux/wait.h>
#include <linux/semaphore.h>
#include <csp/dmacHw.h>
#include <mach/timer.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/pagemap.h>
/* ---- Constants and Types ---------------------------------------------- */
@ -111,78 +105,6 @@ typedef struct {
} DMA_DescriptorRing_t;
/****************************************************************************
*
* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
* DMA chains from a variety of memory sources.
*
*****************************************************************************/
#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
/* off not being DMA'd. */
typedef enum {
DMA_MEM_TYPE_NONE, /* Not a valid setting */
DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
DMA_MEM_TYPE_USER, /* Memory came from user space. */
} DMA_MemType_t;
/* A segment represents a physically and virtually contiguous chunk of memory. */
/* i.e. each segment can be DMA'd */
/* A user of the DMA code will add memory regions. Each region may need to be */
/* represented by one or more segments. */
typedef struct {
void *virtAddr; /* Virtual address used for this segment */
dma_addr_t physAddr; /* Physical address this segment maps to */
size_t numBytes; /* Size of the segment, in bytes */
} DMA_Segment_t;
/* A region represents a virtually contiguous chunk of memory, which may be */
/* made up of multiple segments. */
typedef struct {
DMA_MemType_t memType;
void *virtAddr;
size_t numBytes;
/* Each region (virtually contiguous) consists of one or more segments. Each */
/* segment is virtually and physically contiguous. */
int numSegmentsUsed;
int numSegmentsAllocated;
DMA_Segment_t *segment;
/* When a region corresponds to user memory, we need to lock all of the pages */
/* down before we can figure out the physical addresses. The lockedPage array contains */
/* the pages that were locked, and which subsequently need to be unlocked once the */
/* memory is unmapped. */
unsigned numLockedPages;
struct page **lockedPages;
} DMA_Region_t;
typedef struct {
int inUse; /* Is this mapping currently being used? */
struct semaphore lock; /* Acquired when using this structure */
enum dma_data_direction dir; /* Direction this transfer is intended for */
/* In the event that we're mapping user memory, we need to know which task */
/* the memory is for, so that we can obtain the correct mm locks. */
struct task_struct *userTask;
int numRegionsUsed;
int numRegionsAllocated;
DMA_Region_t *region;
} DMA_MemMap_t;
/****************************************************************************
*
* The DMA_DeviceAttribute_t contains information which describes a
@ -568,124 +490,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
size_t numBytes /* Number of bytes in each destination buffer */
);
/****************************************************************************/
/**
* Initializes a DMA_MemMap_t data structure
*/
/****************************************************************************/
int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
);
/****************************************************************************/
/**
* Releases any memory currently being held by a memory mapping structure.
*/
/****************************************************************************/
int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
);
/****************************************************************************/
/**
* Looks at a memory address and categorizes it.
*
* @return One of the values from the DMA_MemType_t enumeration.
*/
/****************************************************************************/
DMA_MemType_t dma_mem_type(void *addr);
/****************************************************************************/
/**
* Sets the process (aka userTask) associated with a mem map. This is
* required if user-mode segments will be added to the mapping.
*/
/****************************************************************************/
static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
struct task_struct *task)
{
memMap->userTask = task;
}
/****************************************************************************/
/**
* Looks at a memory address and determines if we support DMA'ing to/from
* that type of memory.
*
* @return boolean -
* return value != 0 means dma supported
* return value == 0 means dma not supported
*/
/****************************************************************************/
int dma_mem_supports_dma(void *addr);
/****************************************************************************/
/**
* Initializes a memory map for use. Since this function acquires a
* sempaphore within the memory map, it is VERY important that dma_unmap
* be called when you're finished using the map.
*/
/****************************************************************************/
int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
enum dma_data_direction dir /* Direction that the mapping will be going */
);
/****************************************************************************/
/**
* Adds a segment of memory to a memory map.
*
* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
void *mem, /* Virtual address that we want to get a map of */
size_t numBytes /* Number of bytes being mapped */
);
/****************************************************************************/
/**
* Creates a descriptor ring from a memory mapping.
*
* @return 0 on success, error code otherwise.
*/
/****************************************************************************/
int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
DMA_MemMap_t *memMap, /* Memory map that will be used */
dma_addr_t devPhysAddr /* Physical address of device */
);
/****************************************************************************/
/**
* Maps in a memory region such that it can be used for performing a DMA.
*
* @return
*/
/****************************************************************************/
int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
void *addr, /* Virtual address that we want to get a map of */
size_t count, /* Number of bytes being mapped */
enum dma_data_direction dir /* Direction that the mapping will be going */
);
/****************************************************************************/
/**
* Maps in a memory region such that it can be used for performing a DMA.
*
* @return
*/
/****************************************************************************/
int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
int dirtied /* non-zero if any of the pages were modified */
);
/****************************************************************************/
/**
* Initiates a transfer when the descriptors have already been setup.

6
arch/arm/mach-bcmring/include/mach/entry-macro.S
View File

@ -21,9 +21,6 @@
#include <mach/hardware.h>
#include <mach/csp/mm_io.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =(MM_IO_BASE_INTC0)
ldr \irqstat, [\base, #0] @ get status
@ -77,6 +74,3 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-clps711x/include/mach/entry-macro.S
View File

@ -10,15 +10,9 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
#error INTSR stride != INTMR stride
#endif

15
arch/arm/mach-cns3xxx/include/mach/entry-macro.S
View File

@ -1,15 +0,0 @@
/*
* Low-level IRQ helper macros for Cavium Networks platforms
*
* Copyright 2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

2
arch/arm/mach-davinci/board-da850-evm.c
View File

@ -44,7 +44,7 @@
#include <mach/aemif.h>
#include <mach/spi.h>
#define DA850_EVM_PHY_ID "0:00"
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)

2
arch/arm/mach-davinci/board-dm365-evm.c
View File

@ -54,7 +54,7 @@ static inline int have_tvp7002(void)
return 0;
}
#define DM365_EVM_PHY_ID "0:01"
#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
/*
* A MAX-II CPLD is used for various board control functions.
*/

2
arch/arm/mach-davinci/board-dm644x-evm.c
View File

@ -40,7 +40,7 @@
#include <mach/usb.h>
#include <mach/aemif.h>
#define DM644X_EVM_PHY_ID "0:01"
#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)

2
arch/arm/mach-davinci/board-dm646x-evm.c
View File

@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
#define DM646X_EVM_PHY_ID "0:01"
#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being

2
arch/arm/mach-davinci/board-neuros-osd2.c
View File

@ -39,7 +39,7 @@
#include <mach/mmc.h>
#include <mach/usb.h>
#define NEUROS_OSD2_PHY_ID "0:01"
#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0

2
arch/arm/mach-davinci/board-omapl138-hawk.c
View File

@ -21,7 +21,7 @@
#include <mach/da8xx.h>
#include <mach/mux.h>
#define HAWKBOARD_PHY_ID "0:07"
#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)

2
arch/arm/mach-davinci/board-sffsdr.c
View File

@ -42,7 +42,7 @@
#include <mach/mux.h>
#include <mach/usb.h>
#define SFFSDR_PHY_ID "0:01"
#define SFFSDR_PHY_ID "davinci_mdio-0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1

32
arch/arm/mach-davinci/da850.c
View File

@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = {
.div_reg = PLLDIV3,
};
static struct clk pll1_sysclk4 = {
.name = "pll1_sysclk4",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV4,
};
static struct clk pll1_sysclk5 = {
.name = "pll1_sysclk5",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV5,
};
static struct clk pll1_sysclk6 = {
.name = "pll0_sysclk6",
.parent = &pll0_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV6,
};
static struct clk pll1_sysclk7 = {
.name = "pll1_sysclk7",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV7,
};
static struct clk i2c0_clk = {
.name = "i2c0",
.parent = &pll0_aux_clk,
@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
CLK("i2c_davinci.1", NULL, &i2c0_clk),
CLK(NULL, "timer0", &timerp64_0_clk),
CLK("watchdog", NULL, &timerp64_1_clk),

6
arch/arm/mach-davinci/include/mach/entry-macro.S
View File

@ -11,17 +11,11 @@
#include <mach/io.h>
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =davinci_intc_base
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
ldr \tmp, =davinci_intc_type

6
arch/arm/mach-dove/include/mach/entry-macro.S
View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm

6
arch/arm/mach-ebsa110/include/mach/entry-macro.S
View File

@ -12,16 +12,10 @@
#define IRQ_STAT 0xff000000 /* read */
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #IRQ_STAT
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, stat, base, tmp
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0

17
arch/arm/mach-ep93xx/include/mach/entry-macro.S
View File

@ -1,17 +0,0 @@
/*
* arch/arm/mach-ep93xx/include/mach/entry-macro.S
* IRQ demultiplexing for EP93xx
*
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

16
arch/arm/mach-exynos/include/mach/entry-macro.S
View File

@ -1,16 +0,0 @@
/* arch/arm/mach-exynos4/include/mach/entry-macro.S
*
* Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for EXYNOS4 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-footbridge/include/mach/entry-macro.S
View File

@ -14,9 +14,6 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #dc21285_high
.if dc21285_low
@ -24,9 +21,6 @@
.endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #0x180] @ get interrupts

6
arch/arm/mach-gemini/include/mach/entry-macro.S
View File

@ -12,15 +12,9 @@
#define IRQ_STATUS 0x14
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
ldr \irqnr, [\irqstat]

6
arch/arm/mach-h720x/include/mach/entry-macro.S
View File

@ -8,15 +8,9 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
@ we could use the id register on H7202, but this is not

5
arch/arm/mach-highbank/include/mach/entry-macro.S
View File

@ -1,5 +0,0 @@
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-integrator/include/mach/entry-macro.S
View File

@ -11,15 +11,9 @@
#include <mach/platform.h>
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* FIXME: should not be using soo many LDRs here */
ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)

3
arch/arm/mach-iop13xx/include/mach/entry-macro.S
View File

@ -16,9 +16,6 @@
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)

3
arch/arm/mach-iop32x/include/mach/entry-macro.S
View File

@ -9,9 +9,6 @@
*/
#include <mach/iop32x.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)

3
arch/arm/mach-iop33x/include/mach/entry-macro.S
View File

@ -9,9 +9,6 @@
*/
#include <mach/iop33x.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)

6
arch/arm/mach-ixp2000/include/mach/entry-macro.S
View File

@ -9,15 +9,9 @@
*/
#include <mach/irqs.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0x0 @clear out irqnr as default

6
arch/arm/mach-ixp23xx/include/mach/entry-macro.S
View File

@ -2,15 +2,9 @@
* arch/arm/mach-ixp23xx/include/mach/entry-macro.S
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
ldr \irqnr, [\irqnr] @ get interrupt number

6
arch/arm/mach-ixp4xx/include/mach/entry-macro.S
View File

@ -9,15 +9,9 @@
*/
#include <mach/hardware.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts

6
arch/arm/mach-kirkwood/include/mach/entry-macro.S
View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm

6
arch/arm/mach-ks8695/include/mach/entry-macro.S
View File

@ -14,16 +14,10 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register

6
arch/arm/mach-lpc32xx/include/mach/entry-macro.S
View File

@ -21,16 +21,10 @@
#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* Return IRQ number in irqnr. Also return processor Z flag status in CPSR
* as set if an interrupt is pending.

6
arch/arm/mach-mmp/include/mach/entry-macro.S
View File

@ -8,12 +8,6 @@
#include <mach/regs-icu.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
and \tmp, \tmp, #0xff00

6
arch/arm/mach-msm/include/mach/entry-macro.S
View File

@ -16,12 +16,6 @@
*
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
#if !defined(CONFIG_ARM_GIC)
#include <mach/msm_iomap.h>

6
arch/arm/mach-mv78xx0/include/mach/entry-macro.S
View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm

6
arch/arm/mach-mxs/include/mach/entry-macro.S
View File

@ -23,9 +23,6 @@
#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
#define HW_ICOLL_STAT_OFFSET 0x70
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
cmp \irqnr, #0x7F
@ -36,6 +33,3 @@
.macro get_irqnr_preamble, base, tmp
ldr \base, =MXS_ICOLL_VBASE
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

26
arch/arm/mach-netx/include/mach/entry-macro.S
View File

@ -1,26 +0,0 @@
/*
* arch/arm/mach-netx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Hilscher netX based platforms
*
* Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

13
arch/arm/mach-nomadik/include/mach/entry-macro.S
View File

@ -1,13 +0,0 @@
/*
* Low-level IRQ helper macros for Nomadik platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-omap1/include/mach/entry-macro.S
View File

@ -14,15 +14,9 @@
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]

11
arch/arm/mach-omap2/Kconfig
View File

@ -213,13 +213,12 @@ config MACH_OMAP3_PANDORA
depends on ARCH_OMAP3
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP3_TOUCHBOOK
bool "OMAP3 Touch Book"
depends on ARCH_OMAP3
default y
select BACKLIGHT_CLASS_DEVICE
config MACH_OMAP_3430SDP
bool "OMAP 3430 SDP board"
@ -265,7 +264,7 @@ config MACH_OMAP_ZOOM2
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@ -275,7 +274,7 @@ config MACH_OMAP_ZOOM3
select SERIAL_8250
select SERIAL_CORE_CONSOLE
select SERIAL_8250_CONSOLE
select REGULATOR_FIXED_VOLTAGE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
@ -334,7 +333,7 @@ config MACH_OMAP_4430SDP
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
select REGULATOR_FIXED_VOLTAGE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config MACH_OMAP4_PANDA
bool "OMAP4 Panda Board"
@ -342,7 +341,7 @@ config MACH_OMAP4_PANDA
depends on ARCH_OMAP4
select OMAP_PACKAGE_CBL
select OMAP_PACKAGE_CBS
select REGULATOR_FIXED_VOLTAGE
select REGULATOR_FIXED_VOLTAGE if REGULATOR
config OMAP3_EMU
bool "OMAP3 debugging peripherals"

18
arch/arm/mach-omap2/board-4430sdp.c
View File

@ -52,8 +52,9 @@
#define ETH_KS8851_QUART 138
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
#define OMAP4_SFH7741_ENABLE_GPIO 188
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
@ -603,8 +604,9 @@ static void __init omap_sfh7741prox_init(void)
}
static struct gpio sdp4430_hdmi_gpios[] = {
{ HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
@ -621,8 +623,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
gpio_free(HDMI_GPIO_LS_OE);
gpio_free(HDMI_GPIO_HPD);
gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios));
}
static struct nokia_dsi_panel_data dsi1_panel = {
@ -738,6 +739,10 @@ static void sdp4430_lcd_init(void)
pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
}
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
@ -745,6 +750,7 @@ static struct omap_dss_device sdp4430_hdmi_device = {
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &sdp4430_hdmi_data,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
@ -829,6 +835,10 @@ static void omap_4430sdp_display_init(void)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
#ifdef CONFIG_OMAP_MUX

18
arch/arm/mach-omap2/board-omap4panda.c
View File

@ -51,8 +51,9 @@
#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
/* wl127x BT, FM, GPS connectivity chip */
static int wl1271_gpios[] = {46, -1, -1};
@ -413,8 +414,9 @@ int __init omap4_panda_dvi_init(void)
}
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
{ HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
{ HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" },
};
static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
@ -431,10 +433,13 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev)
static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev)
{
gpio_free(HDMI_GPIO_LS_OE);
gpio_free(HDMI_GPIO_HPD);
gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios));
}
static struct omap_dss_hdmi_data omap4_panda_hdmi_data = {
.hpd_gpio = HDMI_GPIO_HPD,
};
static struct omap_dss_device omap4_panda_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
@ -442,6 +447,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = {
.platform_enable = omap4_panda_panel_enable_hdmi,
.platform_disable = omap4_panda_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
.data = &omap4_panda_hdmi_data,
};
static struct omap_dss_device *omap4_panda_dss_devices[] = {
@ -473,6 +479,10 @@ void omap4_panda_display_init(void)
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
else
omap_hdmi_init(0);
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
}
static void __init omap4_panda_init(void)

1
arch/arm/mach-omap2/devices.c
View File

@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
break;
default:
pr_err("Invalid McSPI Revision value\n");
kfree(pdata);
return -EINVAL;
}

4
arch/arm/mach-omap2/display.c
View File

@ -103,12 +103,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
u32 reg;
u16 control_i2c_1;
/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
omap_mux_init_signal("hdmi_hpd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_cec",
OMAP_PIN_INPUT_PULLUP);
/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
omap_mux_init_signal("hdmi_ddc_scl",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("hdmi_ddc_sda",

6
arch/arm/mach-omap2/gpmc.c
View File

@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
case GPMC_CONFIG_DEV_SIZE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
/* clear 2 target bits */
regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
/* set the proper value */
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;

16
arch/arm/mach-omap2/hsmmc.c
View File

@ -175,14 +175,15 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
{
u32 reg;
if (mmc->slots[0].internal_clock) {
reg = omap_ctrl_readl(control_devconf1_offset);
reg = omap_ctrl_readl(control_devconf1_offset);
if (mmc->slots[0].internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
static void hsmmc23_before_set_reg(struct device *dev, int slot,
static void hsmmc2_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
@ -407,14 +408,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
/* FALLTHROUGH */
case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
mmc->slots[0].after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
mmc->slots[0].before_set_reg = NULL;

18
arch/arm/mach-omap2/include/mach/entry-macro.S
View File

@ -1,18 +0,0 @@
/*
* arch/arm/plat-omap/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for OMAP-based platforms
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

4
arch/arm/mach-omap2/io.c
View File

@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void)
omap_pm_if_early_init();
}
#ifdef CONFIG_ARCH_OMAP2
#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
omap2_set_globals_242x();
@ -400,7 +400,9 @@ void __init omap2420_init_early(void)
omap_hwmod_init_postsetup();
omap2420_clk_init();
}
#endif
#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
omap2_set_globals_243x();

21
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
View File

@ -55,27 +55,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = {
.reset = omap_dss_reset,
};
/*
* 'dispc' class
* display controller
*/
static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class omap2_dispc_hwmod_class = {
.name = "dispc",
.sysc = &omap2_dispc_sysc,
};
/*
* 'rfbi' class
* remote frame buffer interface

22
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
View File

@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = {
{ .name = "dispc", .dma_req = 5 },
{ .dma_req = -1 }
};
/*
* 'dispc' class
* display controller
*/
static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
struct omap_hwmod_class omap2_dispc_hwmod_class = {
.name = "dispc",
.sysc = &omap2_dispc_sysc,
};
/* OMAP2xxx Timer Common */
static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = {
.rev_offs = 0x0000,

54
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -1480,6 +1480,28 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = {
.masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters),
};
/*
* 'dispc' class
* display controller
*/
static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE |
SYSC_HAS_ENAWAKEUP),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3_dispc_hwmod_class = {
.name = "dispc",
.sysc = &omap3_dispc_sysc,
};
/* l4_core -> dss_dispc */
static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = {
.master = &omap3xxx_l4_core_hwmod,
@ -1503,7 +1525,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = {
static struct omap_hwmod omap3xxx_dss_dispc_hwmod = {
.name = "dss_dispc",
.class = &omap2_dispc_hwmod_class,
.class = &omap3_dispc_hwmod_class,
.mpu_irqs = omap2_dispc_irqs,
.main_clk = "dss1_alwon_fck",
.prcm = {
@ -3523,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
/* dss class */
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
&omap3xxx_dss_venc_hwmod,
/* i2c class */
&omap3xxx_i2c1_hwmod,
&omap3xxx_i2c2_hwmod,
@ -3635,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = {
NULL
};
static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = {
/* dss class */
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
&omap3xxx_dss_rfbi_hwmod,
&omap3xxx_dss_venc_hwmod,
NULL
};
int __init omap3xxx_hwmod_init(void)
{
int r;
@ -3708,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void)
if (h)
r = omap_hwmod_register(h);
if (r < 0)
return r;
/*
* DSS code presumes that dss_core hwmod is handled first,
* _before_ any other DSS related hwmods so register common
* DSS hwmods last to ensure that dss_core is already registered.
* Otherwise some change things may happen, for ex. if dispc
* is handled before dss_core and DSS is enabled in bootloader
* DIPSC will be reset with outputs enabled which sometimes leads
* to unrecoverable L3 error.
* XXX The long-term fix to this is to ensure modules are set up
* in dependency order in the hwmod core code.
*/
r = omap_hwmod_register(omap3xxx_dss_hwmods);
return r;
}

2
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = {
static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = {
{
.name = "mpu",
.pa_start = 0x4012e000,
.pa_end = 0x4012e07f,
.flags = ADDR_TYPE_RT
@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = {
static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = {
{
.name = "dma",
.pa_start = 0x4902e000,
.pa_end = 0x4902e07f,
.flags = ADDR_TYPE_RT

1
arch/arm/mach-omap2/prm2xxx_3xxx.c
View File

@ -19,6 +19,7 @@
#include "common.h"
#include <plat/cpu.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
#include "vp.h"

2
arch/arm/mach-omap2/smartreflex.c
View File

@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
ret = sr_late_init(sr_info);
if (ret) {
pr_warning("%s: Error in SR late init\n", __func__);
return ret;
goto err_iounmap;
}
}

2
arch/arm/mach-omap2/timer.c
View File

@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = {
static u32 notrace dmtimer_read_sched_clock(void)
{
if (clksrc.reserved)
return __omap_dm_timer_read_counter(clksrc.io_base, 1);
return __omap_dm_timer_read_counter(&clksrc, 1);
return 0;
}

6
arch/arm/mach-orion5x/include/mach/entry-macro.S
View File

@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =MAIN_IRQ_CAUSE
.endm

16
arch/arm/mach-picoxcell/include/mach/entry-macro.S
View File

@ -1,16 +0,0 @@
/*
* entry-macro.S
*
* Copyright (c) 2011 Picochip Ltd., Jamie Iles
*
* Low-level IRQ helper macros for picoXcell platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-pnx4008/include/mach/entry-macro.S
View File

@ -25,15 +25,9 @@
#define SIC1_BASE_INT 32
#define SIC2_BASE_INT 64
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* decode the MIC interrupt numbers */
ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)

7
arch/arm/mach-prima2/include/mach/entry-macro.S
View File

@ -20,10 +20,3 @@
cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f
movges \irqnr, #0
.endm
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

15
arch/arm/mach-pxa/include/mach/entry-macro.S
View File

@ -1,15 +0,0 @@
/*
* arch/arm/mach-pxa/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for PXA-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

16
arch/arm/mach-realview/include/mach/entry-macro.S
View File

@ -1,16 +0,0 @@
/*
* arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for RealView platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

2
arch/arm/mach-rpc/Makefile
View File

@ -4,7 +4,7 @@
# Object file lists.
obj-y := dma.o irq.o riscpc.o
obj-y := dma.o fiq.o irq.o riscpc.o
obj-m :=
obj-n :=
obj- :=

16
arch/arm/mach-rpc/fiq.S Normal file
View File

@ -0,0 +1,16 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/hardware.h>
#include <mach/entry-macro.S>
.text
.global rpc_default_fiq_end
ENTRY(rpc_default_fiq_start)
mov r12, #ioc_base_high
.if ioc_base_low
orr r12, r12, #ioc_base_low
.endif
strb r12, [r12, #0x38] @ Disable FIQ register
subs pc, lr, #4
rpc_default_fiq_end:

4
arch/arm/mach-rpc/include/mach/entry-macro.S
View File

@ -10,7 +10,3 @@
orr \base, \base, #ioc_base_low
.endif
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-rpc/irq.c
View File

@ -5,6 +5,7 @@
#include <asm/mach/irq.h>
#include <asm/hardware/iomd.h>
#include <asm/irq.h>
#include <asm/fiq.h>
static void iomd_ack_irq_a(struct irq_data *d)
{
@ -112,6 +113,8 @@ static struct irq_chip iomd_fiq_chip = {
.irq_unmask = iomd_unmask_irq_fiq,
};
extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
void __init rpc_init_irq(void)
{
unsigned int irq, flags;
@ -121,6 +124,9 @@ void __init rpc_init_irq(void)
iomd_writeb(0, IOMD_FIQMASK);
iomd_writeb(0, IOMD_DMAMASK);
set_fiq_handler(&rpc_default_fiq_start,
&rpc_default_fiq_end - &rpc_default_fiq_start);
for (irq = 0; irq < NR_IRQS; irq++) {
flags = IRQF_VALID;

8
arch/arm/mach-s3c2410/include/mach/entry-macro.S
View File

@ -25,9 +25,6 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #S3C24XX_VA_IRQ
@ -71,8 +68,3 @@
@@ exit here, Z flag unset if IRQ
.endm
/* currently don't need an disable_fiq macro */
.macro disable_fiq
.endm

19
arch/arm/mach-s3c64xx/include/mach/entry-macro.S
View File

@ -1,19 +0,0 @@
/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Low-level IRQ helper macros for the Samsung S3C64XX series
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

17
arch/arm/mach-s5p64x0/include/mach/entry-macro.S
View File

@ -1,17 +0,0 @@
/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Low-level IRQ helper macros for the Samsung S5P64X0
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-s5pc100/include/mach/entry-macro.S
View File

@ -12,14 +12,8 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
.endm

17
arch/arm/mach-s5pv210/include/mach/entry-macro.S
View File

@ -1,17 +0,0 @@
/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* Low-level IRQ helper macros for the Samsung S5PV210
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-sa1100/include/mach/entry-macro.S
View File

@ -8,17 +8,11 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #0xfa000000 @ ICIP = 0xfa050000
add \base, \base, #0x00050000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base] @ get irqs
ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004

6
arch/arm/mach-shark/include/mach/entry-macro.S
View File

@ -7,16 +7,10 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
mov \base, #0xe0000000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqstat, #0x0C

22
arch/arm/mach-shmobile/include/mach/entry-macro.S
View File

@ -1,22 +0,0 @@
/*
* Copyright (C) 2010 Paul Mundt
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

2
arch/arm/mach-shmobile/setup-sh7372.c
View File

@ -662,6 +662,7 @@ static struct sh_dmae_pdata usb_dma0_platform_data = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
.slave_only = 1,
};
static struct resource sh7372_usb_dmae0_resources[] = {
@ -723,6 +724,7 @@ static struct sh_dmae_pdata usb_dma1_platform_data = {
.dmaor_is_32bit = 1,
.needs_tend_set = 1,
.no_dmars = 1,
.slave_only = 1,
};
static struct resource sh7372_usb_dmae1_resources[] = {

18
arch/arm/mach-spear3xx/include/mach/entry-macro.S
View File

@ -1,18 +0,0 @@
/*
* arch/arm/mach-spear3xx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

18
arch/arm/mach-spear6xx/include/mach/entry-macro.S
View File

@ -1,18 +0,0 @@
/*
* arch/arm/mach-spear6xx/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
* Rajeev Kumar<rajeev-dlh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

20
arch/arm/mach-tegra/include/mach/entry-macro.S
View File

@ -1,20 +0,0 @@
/* arch/arm/mach-tegra/include/mach/entry-macro.S
*
* Copyright (C) 2009 Palm, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

16
arch/arm/mach-u300/include/mach/entry-macro.S
View File

@ -1,16 +0,0 @@
/*
*
* arch-arm/mach-u300/include/mach/entry-macro.S
*
*
* Copyright (C) 2006-2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* Low-level IRQ helper macros for ST-Ericsson U300
* Author: Linus Walleij <linus.walleij@stericsson.com>
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

18
arch/arm/mach-ux500/include/mach/entry-macro.S
View File

@ -1,18 +0,0 @@
/*
* Low-level IRQ helper macros for U8500 platforms
*
* Copyright (C) 2009 ST-Ericsson.
*
* This file is a copy of ARM Realview platform.
* -just satisfied checkpatch script.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

15
arch/arm/mach-versatile/include/mach/entry-macro.S
View File

@ -1,15 +0,0 @@
/*
* arch/arm/mach-versatile/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for Versatile platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

5
arch/arm/mach-vexpress/include/mach/entry-macro.S
View File

@ -1,5 +0,0 @@
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

6
arch/arm/mach-vt8500/include/mach/entry-macro.S
View File

@ -8,18 +8,12 @@
* warranty of any kind, whether express or implied.
*/
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
@ physical 0xd8140000 is virtual 0xf8140000
mov \base, #0xf8000000
orr \base, \base, #0x00140000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base]
cmp \irqnr, #63 @ may be false positive, check interrupt status

8
arch/arm/mach-w90x900/include/mach/entry-macro.S
View File

@ -15,9 +15,6 @@
.macro get_irqnr_preamble, base, tmp
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #AIC_BA
@ -27,8 +24,3 @@
cmp \irqnr, #0
.endm
/* currently don't need an disable_fiq macro */
.macro disable_fiq
.endm

27
arch/arm/mach-zynq/include/mach/entry-macro.S
View File

@ -1,27 +0,0 @@
/*
* arch/arm/mach-zynq/include/mach/entry-macro.S
*
* Low-level IRQ helper macros
*
* Copyright (C) 2011 Xilinx
*
* based on arch/plat-mxc/include/mach/entry-macro.S
*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm

3
arch/arm/mm/ioremap.c
View File

@ -225,8 +225,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype))
continue;
if (__phys_to_pfn(area->phys_addr) > pfn ||
__pfn_to_phys(pfn) + offset + size-1 >
area->phys_addr + area->size-1)
__pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1)
continue;
/* we can drop the lock here as we know *area is static */
read_unlock(&vmlist_lock);

Some files were not shown because too many files have changed in this diff Show More