From 61802130d85fdaf9646340bf1cc64b3e06d0b19c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 30 Sep 2016 12:04:56 +0200 Subject: [PATCH] drm: Document caveats around atomic event handling It's not that obvious how a driver can all race the atomic commit with handling the completion event. And there's unfortunately a pile of drivers with rather bad event handling which misdirect people into the wrong direction. Try to remedy this by documenting everything better. v2: Type fixes Alex spotted. v3: More typos Alex spotted. Cc: Andrzej Hajda Cc: Alex Deucher Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1475229896-6047-1-git-send-email-daniel.vetter@ffwll.ch --- drivers/gpu/drm/drm_irq.c | 32 ++++++++++++++++++++-- include/drm/drm_crtc.h | 56 ++++++++++++++++++++++++++++++--------- 2 files changed, 73 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 404a1ce7730c..b969a64a1514 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -1008,6 +1008,31 @@ static void send_vblank_event(struct drm_device *dev, * period. This helper function implements exactly the required vblank arming * behaviour. * + * NOTE: Drivers using this to send out the event in struct &drm_crtc_state + * as part of an atomic commit must ensure that the next vblank happens at + * exactly the same time as the atomic commit is committed to the hardware. This + * function itself does **not** protect again the next vblank interrupt racing + * with either this function call or the atomic commit operation. A possible + * sequence could be: + * + * 1. Driver commits new hardware state into vblank-synchronized registers. + * 2. A vblank happens, committing the hardware state. Also the corresponding + * vblank interrupt is fired off and fully processed by the interrupt + * handler. + * 3. The atomic commit operation proceeds to call drm_crtc_arm_vblank_event(). + * 4. The event is only send out for the next vblank, which is wrong. + * + * An equivalent race can happen when the driver calls + * drm_crtc_arm_vblank_event() before writing out the new hardware state. + * + * The only way to make this work safely is to prevent the vblank from firing + * (and the hardware from committing anything else) until the entire atomic + * commit sequence has run to completion. If the hardware does not have such a + * feature (e.g. using a "go" bit), then it is unsafe to use this functions. + * Instead drivers need to manually send out the event from their interrupt + * handler by calling drm_crtc_send_vblank_event() and make sure that there's no + * possible race with the hardware committing the atomic update. + * * Caller must hold event lock. Caller must also hold a vblank reference for * the event @e, which will be dropped when the next vblank arrives. */ @@ -1030,8 +1055,11 @@ EXPORT_SYMBOL(drm_crtc_arm_vblank_event); * @crtc: the source CRTC of the vblank event * @e: the event to send * - * Updates sequence # and timestamp on event, and sends it to userspace. - * Caller must hold event lock. + * Updates sequence # and timestamp on event for the most recently processed + * vblank, and sends it to userspace. Caller must hold event lock. + * + * See drm_crtc_arm_vblank_event() for a helper which can be used in certain + * situation, especially to send out events for atomic commit operations. */ void drm_crtc_send_vblank_event(struct drm_crtc *crtc, struct drm_pending_vblank_event *e) diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index a544b7502493..61932f55f788 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -109,8 +109,6 @@ struct drm_plane_helper_funcs; * @ctm: Transformation matrix * @gamma_lut: Lookup table for converting pixel data after the * conversion matrix - * @event: optional pointer to a DRM event to signal upon completion of the - * state update * @state: backpointer to global drm_atomic_state * * Note that the distinction between @enable and @active is rather subtile: @@ -159,6 +157,46 @@ struct drm_crtc_state { struct drm_property_blob *ctm; struct drm_property_blob *gamma_lut; + /** + * @event: + * + * Optional pointer to a DRM event to signal upon completion of the + * state update. The driver must send out the event when the atomic + * commit operation completes. There are two cases: + * + * - The event is for a CRTC which is being disabled through this + * atomic commit. In that case the event can be send out any time + * after the hardware has stopped scanning out the current + * framebuffers. It should contain the timestamp and counter for the + * last vblank before the display pipeline was shut off. + * + * - For a CRTC which is enabled at the end of the commit (even when it + * undergoes an full modeset) the vblank timestamp and counter must + * be for the vblank right before the first frame that scans out the + * new set of buffers. Again the event can only be sent out after the + * hardware has stopped scanning out the old buffers. + * + * - Events for disabled CRTCs are not allowed, and drivers can ignore + * that case. + * + * This can be handled by the drm_crtc_send_vblank_event() function, + * which the driver should call on the provided event upon completion of + * the atomic commit. Note that if the driver supports vblank signalling + * and timestamping the vblank counters and timestamps must agree with + * the ones returned from page flip events. With the current vblank + * helper infrastructure this can be achieved by holding a vblank + * reference while the page flip is pending, acquired through + * drm_crtc_vblank_get() and released with drm_crtc_vblank_put(). + * Drivers are free to implement their own vblank counter and timestamp + * tracking though, e.g. if they have accurate timestamp registers in + * hardware. + * + * For hardware which supports some means to synchronize vblank + * interrupt delivery with committing display state there's also + * drm_crtc_arm_vblank_event(). See the documentation of that function + * for a detailed discussion of the constraints it needs to be used + * safely. + */ struct drm_pending_vblank_event *event; struct drm_atomic_state *state; @@ -835,17 +873,9 @@ struct drm_mode_config_funcs { * CRTC index supplied in &drm_event to userspace. * * The drm core will supply a struct &drm_event in the event - * member of each CRTC's &drm_crtc_state structure. This can be handled by the - * drm_crtc_send_vblank_event() function, which the driver should call on - * the provided event upon completion of the atomic commit. Note that if - * the driver supports vblank signalling and timestamping the vblank - * counters and timestamps must agree with the ones returned from page - * flip events. With the current vblank helper infrastructure this can - * be achieved by holding a vblank reference while the page flip is - * pending, acquired through drm_crtc_vblank_get() and released with - * drm_crtc_vblank_put(). Drivers are free to implement their own vblank - * counter and timestamp tracking though, e.g. if they have accurate - * timestamp registers in hardware. + * member of each CRTC's &drm_crtc_state structure. See the + * documentation for &drm_crtc_state for more details about the precise + * semantics of this event. * * NOTE: *