ARM SoC fixes for v5.12, part 2

Another smaller set of fixes for three of the Arm platforms:
 
 TI OMAP:
 
     Fix swapped mmc device order also for omap3 that got changed with the
     recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the aliases
     should be board specific, all the mmc device instances are all there in
     the SoC, and we do probe them by default so that PM runtime can idle the
     devices if left enabled from the bootloader.
 
 Qualcomm Snapdragon:
 
     This bypasses the, recently introduced, interconnect handling in the
     GENI (serial engine) driver when running off ACPI, as this causes the
     GENI probe to fail and the Lenovo Yoga C630 to boot without keyboard
     and touchpad.
 
 Allwinner:
 
     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the SoPine,
     some MAINTAINERS maintainance, and a clk / reset switch to our headers.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmB8hfwACgkQmmx57+YA
 GNn5QA//TBcW23bLfjYI8kPl7yJ9KSD6UdNGHXYizJry5hAoyLhvCVSq6quPmAPy
 psempGKQBYiRb0Ftewc2+v00u4XdOTxqFw2MDs6UoladfiqyYfkEJxPgXG/k0msJ
 gGIOT5ysDeRiqNAFND0wO6z/wPmlgJl37yTztOrbghWwYLvwlUkqsXzJ9B72FCzM
 MGwrv1LZfEiljuaJAT+nVNkStKxCxSWjzIvYMgC/K9xbAjjtJNZby2tNJObMiARe
 d3G2nGYmo414eQGNb+SDBx5h4aPZGR0ZxdLbzhAFrdw+uUzwlnJ1ufJQnEr6CXql
 4MziHYWRYOAF90uLVeWiH8ZEh/CbxdnenmYCooOj+LAkn6IHAErRlFeZAfjWnckh
 pwcdeebk4SQ9SNDPIWwwVYKVeGtnMM7q8HucDulMRxYmDL5sTprMhJVwxXbshivw
 dnYWzV86FUIOgegUyFgzPKSTVqHbG68dxz2yRhR8yP56pTLnzh/lsB+0DmtiHcIx
 O8chRnvtJib5/XspF6CVXqWYDrvIR5L8h7JMbSU/IetADJwQyEYz9CVh/DyNuiJQ
 +oZY8Xqt3NzC9xOP/pTP6NFDYsVvKwsQRdwT3CBoV7lEM9X4wEypHOR+QmvO8q8m
 AhddgIhx3P7olKnKgylPXS0kjQ3AuBarmnUMI9eaS2tHO2n5z/Y=
 =f2ly
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Another smaller set of fixes for three of the Arm platforms:

  TI OMAP:

     Fix swapped mmc device order also for omap3 that got changed with
     the recent PROBE_PREFER_ASYNCHRONOUS changes. While eventually the
     aliases should be board specific, all the mmc device instances are
     all there in the SoC, and we do probe them by default so that PM
     runtime can idle the devices if left enabled from the bootloader.

  Qualcomm Snapdragon:

     This bypasses the recently introduced interconnect handling in
     the GENI (serial engine) driver when running off ACPI, as this
     causes the GENI probe to fail and the Lenovo Yoga C630 to boot
     without keyboard and touchpad.

  Allwinner:

     One 32kHz clock fix for the beelink gs1, a CD polarity fix for the
     SoPine, some MAINTAINERS maintainance, and a clk / reset switch to
     our headers"

* tag 'arm-fixes-5.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
  MAINTAINERS: Match on allwinner keyword
  MAINTAINERS: Add our new mailing-list
  arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
  arm64: dts: allwinner: h6: Switch to macros for RSB clock/reset indices
  ARM: OMAP2+: Fix uninitialized sr_inst
  ARM: dts: Fix swapped mmc order for omap3
  ARM: OMAP2+: Fix warning for omap_init_time_of()
  soc: qcom: geni: shield geni_icc_get() for ACPI boot

MAINTAINERS

@@ -1576,11 +1576,13 @@ R:	Jernej Skrabec <jernej.skrabec@siol.net>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git
+L:	linux-sunxi@lists.linux.dev
 F:	arch/arm/mach-sunxi/
 F:	arch/arm64/boot/dts/allwinner/
 F:	drivers/clk/sunxi-ng/
 F:	drivers/pinctrl/sunxi/
 F:	drivers/soc/sunxi/
+N:	allwinner
 N:	sun[x456789]i
 N:	sun50i
 

arch/arm/boot/dts/omap3.dtsi

@@ -24,6 +24,9 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

arch/arm/mach-omap2/board-generic.c

@@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void)
 }
 
 /* Clocks are needed early, see drivers/clocksource for the rest */
-void __init __maybe_unused omap_init_time_of(void)
+static void __init __maybe_unused omap_init_time_of(void)
 {
 	omap_clk_init();
 	timer_probe();

arch/arm/mach-omap2/sr_device.c

@@ -188,7 +188,7 @@ static const char * const dra7_sr_instances[] = {
 
 int __init omap_devinit_smartreflex(void)
 {
-	const char * const *sr_inst;
+	const char * const *sr_inst = NULL;
 	int i, nr_sr = 0;
 
 	if (soc_is_omap44xx()) {

arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-lts.dts

@@ -19,3 +19,7 @@
 		};
 	};
 };
+
+&mmc0 {
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 push-push switch */
+};

arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi

@@ -34,7 +34,7 @@
 	vmmc-supply = <&reg_dcdc1>;
 	disable-wp;
 	bus-width = <4>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 push-pull switch */
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -289,10 +289,6 @@
 	vcc-pm-supply = <&reg_aldo1>;
 };
 
-&rtc {
-	clocks = <&ext_osc32k>;
-};
-
 &spdif {
 	status = "okay";
 };

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi

@@ -995,9 +995,9 @@
 			compatible = "allwinner,sun8i-a23-rsb";
 			reg = <0x07083000 0x400>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&r_ccu 13>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
 			clock-frequency = <3000000>;
-			resets = <&r_ccu 7>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&r_rsb_pins>;
 			status = "disabled";

drivers/soc/qcom/qcom-geni-se.c

@@ -756,6 +756,9 @@ int geni_icc_get(struct geni_se *se, const char *icc_ddr)
 	int i, err;
 	const char *icc_names[] = {"qup-core", "qup-config", icc_ddr};
 
+	if (has_acpi_companion(se->dev))
+		return 0;
+
 	for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) {
 		if (!icc_names[i])
 			continue;