arm64: dts: renesas: Extract common Salvator-X/XS board support
The Renesas Salvator-X and Salvator-XS (Salvator-X 2nd version) boards are very similar. To avoid duplication, prepare for the advent of the latter by extracting the common board parts into its own .dtsi file. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
Geert Uytterhoeven
Simon Horman
parent
371294fc42
commit
5fe6a7d8f1
|
|
@ -0,0 +1,629 @@
|
|||
/*
|
||||
* Device Tree Source for common parts of Salvator-X board variants
|
||||
*
|
||||
* Copyright (C) 2015-2016 Renesas Electronics Corp.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4613
|
||||
*
|
||||
* This command is required when Playback/Capture
|
||||
*
|
||||
* amixer set "DVC Out" 100%
|
||||
* amixer set "DVC In" 100%
|
||||
*
|
||||
* You can use Mute
|
||||
*
|
||||
* amixer set "DVC Out Mute" on
|
||||
* amixer set "DVC In Mute" on
|
||||
*
|
||||
* You can use Volume Ramp
|
||||
*
|
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
|
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
|
||||
* amixer set "DVC Out Ramp" on
|
||||
* aplay xxx.wav &
|
||||
* amixer set "DVC Out" 80% // Volume Down
|
||||
* amixer set "DVC Out" 100% // Volume Up
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &scif2;
|
||||
serial1 = &scif1;
|
||||
ethernet0 = &avb;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
audio_clkout: audio_clkout {
|
||||
/*
|
||||
* This is same as <&rcar_sound 0>
|
||||
* but needed to avoid cs2000/rcar_sound probe dead-lock
|
||||
*/
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 50000>;
|
||||
|
||||
brightness-levels = <256 128 64 16 8 4 0>;
|
||||
default-brightness-level = <6>;
|
||||
|
||||
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
rsnd_ak4613: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&sndcpu>;
|
||||
simple-audio-card,frame-master = <&sndcpu>;
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4613>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus0_usb2: regulator-vbus0-usb2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB20_VBUS0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi3: regulator-vcc-sdhi3 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI3 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi3: regulator-vccq-sdhi3 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI3 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
hdmi0-out {
|
||||
compatible = "hdmi-connector";
|
||||
label = "HDMI0 OUT";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi1-out {
|
||||
compatible = "hdmi-connector";
|
||||
label = "HDMI1 OUT";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi1_con: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x12_clk: x12 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24576000>;
|
||||
};
|
||||
|
||||
/* External DU dot clocks */
|
||||
x21_clk: x21-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <33000000>;
|
||||
};
|
||||
|
||||
x22_clk: x22-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <33000000>;
|
||||
};
|
||||
|
||||
x23_clk: x23-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&audio_clk_a {
|
||||
clock-frequency = <22579200>;
|
||||
};
|
||||
|
||||
&avb {
|
||||
pinctrl-0 = <&avb_pins>;
|
||||
pinctrl-names = "default";
|
||||
renesas,no-ether-link;
|
||||
phy-handle = <&phy0>;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
port@3 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&hsusb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <100000>;
|
||||
|
||||
ak4613: codec@10 {
|
||||
compatible = "asahi-kasei,ak4613";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x10>;
|
||||
clocks = <&rcar_sound 3>;
|
||||
|
||||
asahi-kasei,in1-single-end;
|
||||
asahi-kasei,in2-single-end;
|
||||
asahi-kasei,out1-single-end;
|
||||
asahi-kasei,out2-single-end;
|
||||
asahi-kasei,out3-single-end;
|
||||
asahi-kasei,out4-single-end;
|
||||
asahi-kasei,out5-single-end;
|
||||
asahi-kasei,out6-single-end;
|
||||
};
|
||||
|
||||
cs2000: clk_multiplier@4f {
|
||||
#clock-cells = <0>;
|
||||
compatible = "cirrus,cs2000-cp";
|
||||
reg = <0x4f>;
|
||||
clocks = <&audio_clkout>, <&x12_clk>;
|
||||
clock-names = "clk_in", "ref_clk";
|
||||
|
||||
assigned-clocks = <&cs2000>;
|
||||
assigned-clock-rates = <24576000>; /* 1/1 divide */
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
csa_vdd: adc@7c {
|
||||
compatible = "maxim,max9611";
|
||||
reg = <0x7c>;
|
||||
|
||||
shunt-resistor-micro-ohms = <5000>;
|
||||
};
|
||||
|
||||
csa_dvfs: adc@7f {
|
||||
compatible = "maxim,max9611";
|
||||
reg = <0x7f>;
|
||||
|
||||
shunt-resistor-micro-ohms = <5000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_dvfs {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_bus_clk {
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
&pciec0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pciec1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
avb_pins: avb {
|
||||
mux {
|
||||
groups = "avb_link", "avb_phy_int", "avb_mdc",
|
||||
"avb_mii";
|
||||
function = "avb";
|
||||
};
|
||||
|
||||
pins_mdc {
|
||||
groups = "avb_mdc";
|
||||
drive-strength = <24>;
|
||||
};
|
||||
|
||||
pins_mii_tx {
|
||||
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
|
||||
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2_a";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
pwm1_pins: pwm1 {
|
||||
groups = "pwm1_a";
|
||||
function = "pwm1";
|
||||
};
|
||||
|
||||
scif1_pins: scif1 {
|
||||
groups = "scif1_data_a", "scif1_ctrl";
|
||||
function = "scif1";
|
||||
};
|
||||
|
||||
scif2_pins: scif2 {
|
||||
groups = "scif2_data_a";
|
||||
function = "scif2";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk_a";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data8", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi2_pins_uhs: sd2_uhs {
|
||||
groups = "sdhi2_data8", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi3_pins: sd3 {
|
||||
groups = "sdhi3_data4", "sdhi3_ctrl";
|
||||
function = "sdhi3";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi3_pins_uhs: sd3_uhs {
|
||||
groups = "sdhi3_data4", "sdhi3_ctrl";
|
||||
function = "sdhi3";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
|
||||
"audio_clkout_a", "audio_clkout3_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
mux {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
ovc {
|
||||
pins = "GP_6_27";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pwen {
|
||||
pins = "GP_6_26";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-0 = <&pwm1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins &sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
/* audio_clkout0/1/2/3 */
|
||||
#clock-cells = <1>;
|
||||
clock-frequency = <11289600 12288000>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
/* update <audio_clk_b> to <cs2000> */
|
||||
clocks = <&cpg CPG_MOD 1005>,
|
||||
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
|
||||
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
|
||||
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
|
||||
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
|
||||
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
|
||||
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
|
||||
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
|
||||
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
|
||||
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
|
||||
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
|
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
|
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
|
||||
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
|
||||
<&audio_clk_a>, <&cs2000>,
|
||||
<&audio_clk_c>,
|
||||
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0 &src0 &dvc0>;
|
||||
capture = <&ssi1 &src1 &dvc1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scif1 {
|
||||
pinctrl-0 = <&scif1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif2 {
|
||||
pinctrl-0 = <&scif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
/* used for on-board 8bit eMMC */
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-1 = <&sdhi2_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi3 {
|
||||
pinctrl-0 = <&sdhi3_pins>;
|
||||
pinctrl-1 = <&sdhi3_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi3>;
|
||||
vqmmc-supply = <&vccq_sdhi3>;
|
||||
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vbus-supply = <&vbus0_usb2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt0 {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -8,335 +8,18 @@
|
|||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4613
|
||||
*
|
||||
* This command is required when Playback/Capture
|
||||
*
|
||||
* amixer set "DVC Out" 100%
|
||||
* amixer set "DVC In" 100%
|
||||
*
|
||||
* You can use Mute
|
||||
*
|
||||
* amixer set "DVC Out Mute" on
|
||||
* amixer set "DVC In Mute" on
|
||||
*
|
||||
* You can use Volume Ramp
|
||||
*
|
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
|
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
|
||||
* amixer set "DVC Out Ramp" on
|
||||
* aplay xxx.wav &
|
||||
* amixer set "DVC Out" 80% // Volume Down
|
||||
* amixer set "DVC Out" 100% // Volume Up
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "salvator-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Renesas Salvator-X board";
|
||||
compatible = "renesas,salvator-x";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif2;
|
||||
serial1 = &scif1;
|
||||
ethernet0 = &avb;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
audio_clkout: audio_clkout {
|
||||
/*
|
||||
* This is same as <&rcar_sound 0>
|
||||
* but needed to avoid cs2000/rcar_sound probe dead-lock
|
||||
*/
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm1 0 50000>;
|
||||
|
||||
brightness-levels = <256 128 64 16 8 4 0>;
|
||||
default-brightness-level = <6>;
|
||||
|
||||
enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reg_1p8v: regulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-1.8V";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
rsnd_ak4613: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&sndcpu>;
|
||||
simple-audio-card,frame-master = <&sndcpu>;
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4613>;
|
||||
};
|
||||
};
|
||||
|
||||
vbus0_usb2: regulator-vbus0-usb2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "USB20_VBUS0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
||||
gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi3: regulator-vcc-sdhi3 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI3 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi3: regulator-vccq-sdhi3 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI3 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
hdmi0-out {
|
||||
compatible = "hdmi-connector";
|
||||
label = "HDMI0 OUT";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi0_con: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi1-out {
|
||||
compatible = "hdmi-connector";
|
||||
label = "HDMI1 OUT";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi1_con: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga {
|
||||
compatible = "vga-connector";
|
||||
|
||||
port {
|
||||
vga_in: endpoint {
|
||||
remote-endpoint = <&adv7123_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vga-encoder {
|
||||
compatible = "adi,adv7123";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7123_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7123_out: endpoint {
|
||||
remote-endpoint = <&vga_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x12_clk: x12 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24576000>;
|
||||
};
|
||||
|
||||
/* External DU dot clocks */
|
||||
x21_clk: x21-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <33000000>;
|
||||
};
|
||||
|
||||
x22_clk: x22-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <33000000>;
|
||||
};
|
||||
|
||||
x23_clk: x23-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <25000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&audio_clk_a {
|
||||
clock-frequency = <22579200>;
|
||||
};
|
||||
|
||||
&avb {
|
||||
pinctrl-0 = <&avb_pins>;
|
||||
pinctrl-names = "default";
|
||||
renesas,no-ether-link;
|
||||
phy-handle = <&phy0>;
|
||||
status = "okay";
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
rxc-skew-ps = <1500>;
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7123_in>;
|
||||
};
|
||||
};
|
||||
port@3 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <16666666>;
|
||||
};
|
||||
|
||||
&extalr_clk {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&hsusb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
clock-frequency = <100000>;
|
||||
|
||||
ak4613: codec@10 {
|
||||
compatible = "asahi-kasei,ak4613";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x10>;
|
||||
clocks = <&rcar_sound 3>;
|
||||
|
||||
asahi-kasei,in1-single-end;
|
||||
asahi-kasei,in2-single-end;
|
||||
asahi-kasei,out1-single-end;
|
||||
asahi-kasei,out2-single-end;
|
||||
asahi-kasei,out3-single-end;
|
||||
asahi-kasei,out4-single-end;
|
||||
asahi-kasei,out5-single-end;
|
||||
asahi-kasei,out6-single-end;
|
||||
};
|
||||
|
||||
cs2000: clk_multiplier@4f {
|
||||
#clock-cells = <0>;
|
||||
compatible = "cirrus,cs2000-cp";
|
||||
reg = <0x4f>;
|
||||
clocks = <&audio_clkout>, <&x12_clk>;
|
||||
clock-names = "clk_in", "ref_clk";
|
||||
|
||||
assigned-clocks = <&cs2000>;
|
||||
assigned-clock-rates = <24576000>; /* 1/1 divide */
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
versaclock5: clock-generator@6a {
|
||||
compatible = "idt,5p49v5923";
|
||||
reg = <0x6a>;
|
||||
|
|
@ -344,301 +27,4 @@
|
|||
clocks = <&x23_clk>;
|
||||
clock-names = "xin";
|
||||
};
|
||||
|
||||
csa_vdd: adc@7c {
|
||||
compatible = "maxim,max9611";
|
||||
reg = <0x7c>;
|
||||
|
||||
shunt-resistor-micro-ohms = <5000>;
|
||||
};
|
||||
|
||||
csa_dvfs: adc@7f {
|
||||
compatible = "maxim,max9611";
|
||||
reg = <0x7f>;
|
||||
|
||||
shunt-resistor-micro-ohms = <5000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_dvfs {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ohci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_bus_clk {
|
||||
clock-frequency = <100000000>;
|
||||
};
|
||||
|
||||
&pciec0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pciec1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
avb_pins: avb {
|
||||
mux {
|
||||
groups = "avb_link", "avb_phy_int", "avb_mdc",
|
||||
"avb_mii";
|
||||
function = "avb";
|
||||
};
|
||||
|
||||
pins_mdc {
|
||||
groups = "avb_mdc";
|
||||
drive-strength = <24>;
|
||||
};
|
||||
|
||||
pins_mii_tx {
|
||||
pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
|
||||
"PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
|
||||
drive-strength = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2_a";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
pwm1_pins: pwm1 {
|
||||
groups = "pwm1_a";
|
||||
function = "pwm1";
|
||||
};
|
||||
|
||||
scif1_pins: scif1 {
|
||||
groups = "scif1_data_a", "scif1_ctrl";
|
||||
function = "scif1";
|
||||
};
|
||||
|
||||
scif2_pins: scif2 {
|
||||
groups = "scif2_data_a";
|
||||
function = "scif2";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk_a";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data8", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi2_pins_uhs: sd2_uhs {
|
||||
groups = "sdhi2_data8", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi3_pins: sd3 {
|
||||
groups = "sdhi3_data4", "sdhi3_ctrl";
|
||||
function = "sdhi3";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi3_pins_uhs: sd3_uhs {
|
||||
groups = "sdhi3_data4", "sdhi3_ctrl";
|
||||
function = "sdhi3";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
|
||||
"audio_clkout_a", "audio_clkout3_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
usb0_pins: usb0 {
|
||||
groups = "usb0";
|
||||
function = "usb0";
|
||||
};
|
||||
|
||||
usb1_pins: usb1 {
|
||||
mux {
|
||||
groups = "usb1";
|
||||
function = "usb1";
|
||||
};
|
||||
|
||||
ovc {
|
||||
pins = "GP_6_27";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pwen {
|
||||
pins = "GP_6_26";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-0 = <&pwm1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins &sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
/* audio_clkout0/1/2/3 */
|
||||
#clock-cells = <1>;
|
||||
clock-frequency = <11289600 12288000>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
/* update <audio_clk_b> to <cs2000> */
|
||||
clocks = <&cpg CPG_MOD 1005>,
|
||||
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
|
||||
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
|
||||
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
|
||||
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
|
||||
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
|
||||
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
|
||||
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
|
||||
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
|
||||
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
|
||||
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
|
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
|
||||
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
|
||||
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
|
||||
<&audio_clk_a>, <&cs2000>,
|
||||
<&audio_clk_c>,
|
||||
<&cpg CPG_CORE CPG_AUDIO_CLK_I>;
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0 &src0 &dvc0>;
|
||||
capture = <&ssi1 &src1 &dvc1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&scif1 {
|
||||
pinctrl-0 = <&scif1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif2 {
|
||||
pinctrl-0 = <&scif2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
/* used for on-board 8bit eMMC */
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-1 = <&sdhi2_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <®_3p3v>;
|
||||
vqmmc-supply = <®_1p8v>;
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi3 {
|
||||
pinctrl-0 = <&sdhi3_pins>;
|
||||
pinctrl-1 = <&sdhi3_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi3>;
|
||||
vqmmc-supply = <&vccq_sdhi3>;
|
||||
cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <4>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
|
||||
&usb2_phy0 {
|
||||
pinctrl-0 = <&usb0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vbus-supply = <&vbus0_usb2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wdt0 {
|
||||
timeout-sec = <60>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue