From 5fac78aac91d89b4a04c1cbd92254f62935c2711 Mon Sep 17 00:00:00 2001 From: Govind Singh Date: Thu, 20 Dec 2018 14:24:10 +0200 Subject: [PATCH] dt: bindings: ath10k: add missing dt properties for WCN3990 wifi node Add missing optional properties in WCN3990 wifi node. Signed-off-by: Govind Singh Reviewed-by: Rob Herring Reviewed-by: Brian Norris Tested-by: Brian Norris Signed-off-by: Kalle Valo --- .../bindings/net/wireless/qcom,ath10k.txt | 57 ++++++++++++------- 1 file changed, 35 insertions(+), 22 deletions(-) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index 2196d1ab3c8c..51fcf93d743b 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -21,10 +21,22 @@ can be provided per device. SNOC based devices (i.e. wcn3990) uses compatible string "qcom,wcn3990-wifi". -Optional properties: - reg: Address and length of the register set for the device. - reg-names: Must include the list of following reg names, "membase" +- interrupts: reference to the list of 17 interrupt numbers for "qcom,ipq4019-wifi" + compatible target. + reference to the list of 12 interrupt numbers for "qcom,wcn3990-wifi" + compatible target. + Must contain interrupt-names property per entry for + "qcom,ath10k", "qcom,ipq4019-wifi" compatible targets. + +- interrupt-names: Must include the entries for MSI interrupt + names ("msi0" to "msi15") and legacy interrupt + name ("legacy") for "qcom,ath10k", "qcom,ipq4019-wifi" + compatible targets. + +Optional properties: - resets: Must contain an entry for each entry in reset-names. See ../reset/reseti.txt for details. - reset-names: Must include the list of following reset names, @@ -37,12 +49,9 @@ Optional properties: - clocks: List of clock specifiers, must contain an entry for each required entry in clock-names. - clock-names: Should contain the clock names "wifi_wcss_cmd", "wifi_wcss_ref", - "wifi_wcss_rtc". -- interrupts: List of interrupt lines. Must contain an entry - for each entry in the interrupt-names property. -- interrupt-names: Must include the entries for MSI interrupt - names ("msi0" to "msi15") and legacy interrupt - name ("legacy"), + "wifi_wcss_rtc" for "qcom,ipq4019-wifi" compatible target and + "cxo_ref_clk_pin" for "qcom,wcn3990-wifi" + compatible target. - qcom,msi_addr: MSI interrupt address. - qcom,msi_base: Base value to add before writing MSI data into MSI address register. @@ -55,7 +64,8 @@ Optional properties: - qcom,ath10k-pre-calibration-data : pre calibration data as an array, the length can vary between hw versions. - -supply: handle to the regulator device tree node - optional "supply-name" is "vdd-0.8-cx-mx". + optional "supply-name" are "vdd-0.8-cx-mx", + "vdd-1.8-xo", "vdd-1.3-rfa" and "vdd-3.3-ch0". - memory-region: Usage: optional Value type: @@ -138,21 +148,24 @@ wifi@18000000 { compatible = "qcom,wcn3990-wifi"; reg = <0x18800000 0x800000>; reg-names = "membase"; - clocks = <&clock_gcc clk_aggre2_noc_clk>; - clock-names = "smmu_aggre2_noc_clk" + clocks = <&clock_gcc clk_rf_clk2_pin>; + clock-names = "cxo_ref_clk_pin"; interrupts = - <0 130 0 /* CE0 */ >, - <0 131 0 /* CE1 */ >, - <0 132 0 /* CE2 */ >, - <0 133 0 /* CE3 */ >, - <0 134 0 /* CE4 */ >, - <0 135 0 /* CE5 */ >, - <0 136 0 /* CE6 */ >, - <0 137 0 /* CE7 */ >, - <0 138 0 /* CE8 */ >, - <0 139 0 /* CE9 */ >, - <0 140 0 /* CE10 */ >, - <0 141 0 /* CE11 */ >; + , + , + , + , + , + , + , + , + , + , + , + ; vdd-0.8-cx-mx-supply = <&pm8998_l5>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; memory-region = <&wifi_msa_mem>; };