diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 5dba0a40acad..60aeff3e154b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -818,6 +818,41 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li)
 	return ext_stat;
 }
 
+static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status,
+				      u32 portsc)
+{
+	struct xhci_hcd	*xhci;
+	u32 link_state;
+	u32 portnum;
+
+	xhci = hcd_to_xhci(port->rhub->hcd);
+	link_state = portsc & PORT_PLS_MASK;
+	portnum = port->hcd_portnum;
+
+	/* USB3 specific wPortChange bits
+	 *
+	 * Port link change with port in resume state should not be
+	 * reported to usbcore, as this is an internal state to be
+	 * handled by xhci driver. Reporting PLC to usbcore may
+	 * cause usbcore clearing PLC first and port change event
+	 * irq won't be generated.
+	 */
+
+	if (portsc & PORT_PLC && (link_state != XDEV_RESUME))
+		*status |= USB_PORT_STAT_C_LINK_STATE << 16;
+	if (portsc & PORT_WRC)
+		*status |= USB_PORT_STAT_C_BH_RESET << 16;
+	if (portsc & PORT_CEC)
+		*status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
+
+	/* USB3 specific wPortStatus bits */
+	if (portsc & PORT_POWER)
+		*status |= USB_SS_PORT_STAT_POWER;
+
+	xhci_hub_report_usb3_link_state(xhci, status, portsc);
+	xhci_del_comp_mod_timer(xhci, portsc, portnum);
+}
+
 /*
  * Converts a raw xHCI port status into the format that external USB 2.0 or USB
  * 3.0 hubs use.
@@ -854,22 +889,8 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 	if ((raw_port_status & PORT_RC))
 		status |= USB_PORT_STAT_C_RESET << 16;
 	/* USB3.0 only */
-	if (hcd->speed >= HCD_USB3) {
-		/* Port link change with port in resume state should not be
-		 * reported to usbcore, as this is an internal state to be
-		 * handled by xhci driver. Reporting PLC to usbcore may
-		 * cause usbcore clearing PLC first and port change event
-		 * irq won't be generated.
-		 */
-		if ((raw_port_status & PORT_PLC) &&
-			(raw_port_status & PORT_PLS_MASK) != XDEV_RESUME)
-			status |= USB_PORT_STAT_C_LINK_STATE << 16;
-		if ((raw_port_status & PORT_WRC))
-			status |= USB_PORT_STAT_C_BH_RESET << 16;
-		if ((raw_port_status & PORT_CEC))
-			status |= USB_PORT_STAT_C_CONFIG_ERROR << 16;
-	}
-
+	if (hcd->speed >= HCD_USB3)
+		xhci_get_usb3_port_status(port, &status, raw_port_status);
 	if (hcd->speed < HCD_USB3) {
 		if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3
 				&& (raw_port_status & PORT_POWER))
@@ -989,22 +1010,13 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 	if (raw_port_status & PORT_RESET)
 		status |= USB_PORT_STAT_RESET;
 	if (raw_port_status & PORT_POWER) {
-		if (hcd->speed >= HCD_USB3)
-			status |= USB_SS_PORT_STAT_POWER;
-		else
+		if (hcd->speed < HCD_USB3)
 			status |= USB_PORT_STAT_POWER;
 	}
 	/* Update Port Link State */
-	if (hcd->speed >= HCD_USB3) {
-		xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
-		/*
-		 * Verify if all USB3 Ports Have entered U0 already.
-		 * Delete Compliance Mode Timer if so.
-		 */
-		xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex);
-	} else {
+	if (hcd->speed < HCD_USB3)
 		xhci_hub_report_usb2_link_state(&status, raw_port_status);
-	}
+
 	if (bus_state->port_c_suspend & (1 << wIndex))
 		status |= USB_PORT_STAT_C_SUSPEND << 16;