hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

New feature development 

This adds support for new features, and contains stuff from most
 platforms. A number of these patches could have fit into other
 branches, too, but were small enough not to cause too much
 confusion here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtYgGCrR//JCVInAQKzRRAAybELlfOIT1fyVlzkzIgw0/OKxS75Vqda
 v5mNYUfQ001WxGjwbFGgFphrQgyhulmLj6gN5l1rwaBjEZlwLe5uk3sReeqeDMLk
 bERLbpg22ymka4JVhvugq5qh9UP2ptlvZV/cAZC0u2JBq+CaarFIJsrzbOyXAngf
 4kUkaMhKi8DDZTqrwwACaLxR7qtf3ddiSxNLZ93X4fDh4a3qs/EJErVg/xCFlfM3
 YTzTjKuqLV2cGT34E9YTJieN9o94G+PiqvbDsP3kOwG2dSElpRWsZwX/0hDoyCxN
 cWbqPfrrdzt/kDcNnNd8MZ16AJlPc4ElVVEWPF71tKP3HfKqtZ0vMlpzsldioFz6
 8AKvaXJXRkRddY4KqNcXeEQHcDxO0uniG/3lhZY8NlzO/1PnPQ4hGl8fhw+e/2z0
 nAQFUsCVIXacsxamPk/fFBUhYzyK7JrnH4pB3b7SPcCj7X9MVyWK+pbT5LA+VGOL
 Ys8tv3NtTWEObyW1s3NT+BEy9FkkRu4EG3TxPwHUXk4BTwa6nDmJBPjk7Hv7q4cn
 T58lPet8Aylhht2aZx+0dxK3MHtMOmgsJ5jQF0OAi48Kmx8kXPZ1AeXObROncbZL
 aI7qfuGTzps7MlUBYlmrMdceTfYLeOqIEoVyFX8N4xLE33alk8DMKc37QoTJVuxQ
 KrY8sCVMkK0=
 =N2B4
 -----END PGP SIGNATURE-----

Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

New feature development

This adds support for new features, and contains stuff from most
platforms. A number of these patches could have fit into other
branches, too, but were small enough not to cause too much
confusion here.

* tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mfd/db8500-prcmu: remove support for early silicon revisions
  ARM: ux500: fix the smp_twd clock calculation
  ARM: ux500: remove support for early silicon revisions
  ARM: ux500: update register files
  ARM: ux500: register DB5500 PMU dynamically
  ARM: ux500: update ASIC detection for U5500
  ARM: ux500: support DB8520
  ARM: picoxcell: implement watchdog restart
  ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C
  ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3
  ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3
  ARM: Orion: Remove address map info from all platform data structures
  ARM: Orion: Get address map from plat-orion instead of via platform_data
  ARM: Orion: mbus_dram_info consolidation
  ARM: Orion: Consolidate the address map setup
  ARM: Kirkwood: Add configuration for MPP12 as GPIO
  ARM: Kirkwood: Recognize A1 revision of 6282 chip
  ARM: ux500: update the MOP500 GPIO assignments
  ...
This commit is contained in:
Linus Torvalds 2012-01-09 14:38:51 -08:00
parent 6d889d03ab 3e2762c8f1
commit 5ede3ceb7b
75 changed files with 1439 additions and 970 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/boot/dts/highbank.dts
View File

@ -194,5 +194,17 @@
reg = <0xfff3d000 0x1000>;
interrupts = <0 92 4>;
};
ethernet@fff50000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff50000 0x1000>;
interrupts = <0 77 4 0 78 4 0 79 4>;
};
ethernet@fff51000 {
compatible = "calxeda,hb-xgmac";
reg = <0xfff51000 0x1000>;
interrupts = <0 80 4 0 81 4 0 82 4>;
};
};
};

1
arch/arm/configs/omap1_defconfig
View File

@ -48,7 +48,6 @@ CONFIG_MACH_SX1=y
CONFIG_MACH_NOKIA770=y
CONFIG_MACH_AMS_DELTA=y
CONFIG_MACH_OMAP_GENERIC=y
CONFIG_OMAP_ARM_182MHZ=y
# CONFIG_ARM_THUMB is not set
CONFIG_PCCARD=y
CONFIG_OMAP_CF=y

13
arch/arm/mach-davinci/clock.c
View File

@ -31,19 +31,12 @@ static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
static unsigned psc_domain(struct clk *clk)
{
return (clk->flags & PSC_DSP)
? DAVINCI_GPSC_DSPDOMAIN
: DAVINCI_GPSC_ARMDOMAIN;
}
static void __clk_enable(struct clk *clk)
{
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
true, clk->flags);
}
@ -53,7 +46,7 @@ static void __clk_disable(struct clk *clk)
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) &&
(clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc,
davinci_psc_config(clk->domain, clk->gpsc, clk->lpsc,
false, clk->flags);
if (clk->parent)
__clk_disable(clk->parent);
@ -237,7 +230,7 @@ static int __init clk_disable_unused(void)
pr_debug("Clocks: disable unused %s\n", ck->name);
davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc,
davinci_psc_config(ck->domain, ck->gpsc, ck->lpsc,
false, ck->flags);
}
spin_unlock_irq(&clockfw_lock);

10
arch/arm/mach-davinci/clock.h
View File

@ -93,6 +93,7 @@ struct clk {
u8 usecount;
u8 lpsc;
u8 gpsc;
u8 domain;
u32 flags;
struct clk *parent;
struct list_head children; /* list of children */
@ -107,11 +108,10 @@ struct clk {
/* Clock flags: SoC-specific flags start at BIT(16) */
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
#define CLK_PLL BIT(4) /* PLL-derived clock */
#define PRE_PLL BIT(5) /* source is before PLL mult/div */
#define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */
#define PSC_FORCE BIT(7) /* Force module state transtition */
#define CLK_PLL BIT(3) /* PLL-derived clock */
#define PRE_PLL BIT(4) /* source is before PLL mult/div */
#define PSC_SWRSTDISABLE BIT(5) /* Disable state is SwRstDisable */
#define PSC_FORCE BIT(6) /* Force module state transtition */
#define CLK(dev, con, ck) \
{ \

4
arch/arm/mach-davinci/dm644x.c
View File

@ -130,7 +130,7 @@ static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DAVINCI_LPSC_GEM,
.flags = PSC_DSP,
.domain = DAVINCI_GPSC_DSPDOMAIN,
.usecount = 1, /* REVISIT how to disable? */
};
@ -145,7 +145,7 @@ static struct clk vicp_clk = {
.name = "vicp",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_IMCOP,
.flags = PSC_DSP,
.domain = DAVINCI_GPSC_DSPDOMAIN,
.usecount = 1, /* REVISIT how to disable? */
};

127
arch/arm/mach-dove/addr-map.c
View File

@ -14,6 +14,7 @@
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
#include <plat/addr-map.h>
#include "common.h"
/*
@ -34,46 +35,57 @@
#define ATTR_PCIE_MEM 0xe8
#define ATTR_SCRATCHPAD 0x0
/*
* CPU Address Decode Windows registers
*/
#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
struct mbus_dram_target_info dove_mbus_dram_info;
static inline void __iomem *ddr_map_sc(int i)
{
return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
}
static int cpu_win_can_remap(int win)
{
if (win < 4)
return 1;
/*
* Description of the windows needed by the platform code
*/
static struct __initdata orion_addr_map_cfg addr_map_cfg = {
.num_wins = 8,
.remappable_wins = 4,
.bridge_virt_base = BRIDGE_VIRT_BASE,
};
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
u32 ctrl;
base &= 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base, WIN_BASE(win));
writel(ctrl, WIN_CTRL(win));
if (cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, WIN_REMAP_LO(win));
writel(0, WIN_REMAP_HI(win));
}
}
static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
* Windows for PCIe IO+MEM space.
*/
{ 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
},
{ 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
},
{ 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
TARGET_PCIE0, ATTR_PCIE_MEM, -1
},
{ 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
TARGET_PCIE1, ATTR_PCIE_MEM, -1
},
/*
* Window for CESA engine.
*/
{ 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
TARGET_CESA, ATTR_CESA, -1
},
/*
* Window to the BootROM for Standby and Sleep Resume
*/
{ 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
TARGET_BOOTROM, ATTR_BOOTROM, -1
},
/*
* Window to the PMU Scratch Pad space
*/
{ 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
},
/* End marker */
{ -1, 0, 0, 0, 0, 0 }
};
void __init dove_setup_cpu_mbus(void)
{
@ -81,51 +93,14 @@ void __init dove_setup_cpu_mbus(void)
int cs;
/*
* First, disable and clear windows.
* Disable, clear and configure windows.
*/
for (i = 0; i < 8; i++) {
writel(0, WIN_BASE(i));
writel(0, WIN_CTRL(i));
if (cpu_win_can_remap(i)) {
writel(0, WIN_REMAP_LO(i));
writel(0, WIN_REMAP_HI(i));
}
}
/*
* Setup windows for PCIe IO+MEM space.
*/
setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
TARGET_PCIE0, ATTR_PCIE_MEM, -1);
setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
TARGET_PCIE1, ATTR_PCIE_MEM, -1);
/*
* Setup window for CESA engine.
*/
setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
TARGET_CESA, ATTR_CESA, -1);
/*
* Setup the Window to the BootROM for Standby and Sleep Resume
*/
setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
TARGET_BOOTROM, ATTR_BOOTROM, -1);
/*
* Setup the Window to the PMU Scratch Pad space
*/
setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
orion_config_wins(&addr_map_cfg, addr_map_info);
/*
* Setup MBUS dram target info.
*/
dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
for (i = 0, cs = 0; i < 2; i++) {
u32 map = readl(ddr_map_sc(i));
@ -136,7 +111,7 @@ void __init dove_setup_cpu_mbus(void)
if (map & 1) {
struct mbus_dram_window *w;
w = &dove_mbus_dram_info.cs[cs++];
w = &orion_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0; /* CS address decoding done inside */
/* the DDR controller, no need to */
@ -145,5 +120,5 @@ void __init dove_setup_cpu_mbus(void)
w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
}
}
dove_mbus_dram_info.num_cs = cs;
orion_mbus_dram_info.num_cs = cs;
}

16
arch/arm/mach-dove/common.c
View File

@ -14,7 +14,6 @@
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/clk.h>
#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/gpio.h>
#include <asm/page.h>
@ -30,6 +29,7 @@
#include <linux/irq.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
static int get_tclk(void);
@ -71,8 +71,7 @@ void __init dove_map_io(void)
****************************************************************************/
void __init dove_ehci0_init(void)
{
orion_ehci_init(&dove_mbus_dram_info,
DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
}
/*****************************************************************************
@ -80,8 +79,7 @@ void __init dove_ehci0_init(void)
****************************************************************************/
void __init dove_ehci1_init(void)
{
orion_ehci_1_init(&dove_mbus_dram_info,
DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
orion_ehci_1_init(DOVE_USB1_PHYS_BASE, IRQ_DOVE_USB1);
}
/*****************************************************************************
@ -89,7 +87,7 @@ void __init dove_ehci1_init(void)
****************************************************************************/
void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data, &dove_mbus_dram_info,
orion_ge00_init(eth_data,
DOVE_GE00_PHYS_BASE, IRQ_DOVE_GE00_SUM,
0, get_tclk());
}
@ -107,8 +105,7 @@ void __init dove_rtc_init(void)
****************************************************************************/
void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
{
orion_sata_init(sata_data, &dove_mbus_dram_info,
DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
orion_sata_init(sata_data, DOVE_SATA_PHYS_BASE, IRQ_DOVE_SATA);
}
@ -198,8 +195,7 @@ struct sys_timer dove_timer = {
****************************************************************************/
void __init dove_xor0_init(void)
{
orion_xor0_init(&dove_mbus_dram_info,
DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
orion_xor0_init(DOVE_XOR0_PHYS_BASE, DOVE_XOR0_HIGH_PHYS_BASE,
IRQ_DOVE_XOR_00, IRQ_DOVE_XOR_01);
}

1
arch/arm/mach-dove/common.h
View File

@ -15,7 +15,6 @@ struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
extern struct sys_timer dove_timer;
extern struct mbus_dram_target_info dove_mbus_dram_info;
/*
* Basic Dove init functions used early by machine-setup.

4
arch/arm/mach-dove/pcie.c
View File

@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/mach/pci.h>
#include <asm/mach/arch.h>
@ -19,6 +18,7 @@
#include <plat/pcie.h>
#include <mach/irqs.h>
#include <mach/bridge-regs.h>
#include <plat/addr-map.h>
#include "common.h"
struct pcie_port {
@ -50,7 +50,7 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &dove_mbus_dram_info);
orion_pcie_setup(pp->base);
/*
* IORESOURCE_IO

145
arch/arm/mach-kirkwood/addr-map.c
View File

@ -13,12 +13,12 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/addr-map.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_SRAM 3
#define TARGET_PCIE 4
@ -36,118 +36,55 @@
#define ATTR_SRAM 0x01
/*
* Helpers to get DDR bank info
* Description of the windows needed by the platform code
*/
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
static struct __initdata orion_addr_map_cfg addr_map_cfg = {
.num_wins = 8,
.remappable_wins = 4,
.bridge_virt_base = BRIDGE_VIRT_BASE,
};
/*
* CPU Address Decode Windows registers
*/
#define WIN_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN_CTRL_OFF 0x0000
#define WIN_BASE_OFF 0x0004
#define WIN_REMAP_LO_OFF 0x0008
#define WIN_REMAP_HI_OFF 0x000c
struct mbus_dram_target_info kirkwood_mbus_dram_info;
static int __init cpu_win_can_remap(int win)
{
if (win < 4)
return 1;
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
void __iomem *addr = (void __iomem *)WIN_OFF(win);
u32 ctrl;
base &= 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
if (cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
* Windows for PCIe IO+MEM space.
*/
{ 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
},
{ 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
},
{ 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
},
{ 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
},
/*
* Window for NAND controller.
*/
{ 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1
},
/*
* Window for SRAM.
*/
{ 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
TARGET_SRAM, ATTR_SRAM, -1
},
/* End marker */
{ -1, 0, 0, 0, 0, 0 }
};
void __init kirkwood_setup_cpu_mbus(void)
{
void __iomem *addr;
int i;
int cs;
/*
* First, disable and clear windows.
* Disable, clear and configure windows.
*/
for (i = 0; i < 8; i++) {
addr = (void __iomem *)WIN_OFF(i);
writel(0, addr + WIN_BASE_OFF);
writel(0, addr + WIN_CTRL_OFF);
if (cpu_win_can_remap(i)) {
writel(0, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
/*
* Setup windows for PCIe IO+MEM space.
*/
setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
/*
* Setup window for NAND controller.
*/
setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
/*
* Setup window for SRAM.
*/
setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
TARGET_SRAM, ATTR_SRAM, -1);
orion_config_wins(&addr_map_cfg, addr_map_info);
/*
* Setup MBUS dram target info.
*/
kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
for (i = 0, cs = 0; i < 4; i++) {
u32 base = readl(addr + DDR_BASE_CS_OFF(i));
u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
*/
if (size & 1) {
struct mbus_dram_window *w;
w = &kirkwood_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
w->base = base & 0xffff0000;
w->size = (size | 0x0000ffff) + 1;
}
}
kirkwood_mbus_dram_info.num_cs = cs;
orion_setup_cpu_mbus_target(&addr_map_cfg, DDR_WINDOW_CPU_BASE);
}

19
arch/arm/mach-kirkwood/common.c
View File

@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/mtd/nand.h>
#include <linux/dma-mapping.h>
@ -30,6 +29,7 @@
#include <plat/orion_nand.h>
#include <plat/common.h>
#include <plat/time.h>
#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@ -73,8 +73,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
orion_ehci_init(&kirkwood_mbus_dram_info,
USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
}
@ -85,7 +84,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
kirkwood_clk_ctrl |= CGC_GE0;
orion_ge00_init(eth_data, &kirkwood_mbus_dram_info,
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR, kirkwood_tclk);
}
@ -99,7 +98,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
kirkwood_clk_ctrl |= CGC_GE1;
orion_ge01_init(eth_data, &kirkwood_mbus_dram_info,
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR, kirkwood_tclk);
}
@ -178,8 +177,7 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
if (sata_data->n_ports > 1)
kirkwood_clk_ctrl |= CGC_SATA1;
orion_sata_init(sata_data, &kirkwood_mbus_dram_info,
SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_KIRKWOOD_SATA);
}
@ -221,7 +219,6 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
mvsdio_data->clock = 100000000;
else
mvsdio_data->clock = 200000000;
mvsdio_data->dram = &kirkwood_mbus_dram_info;
kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
@ -285,8 +282,7 @@ static void __init kirkwood_xor0_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR0;
orion_xor0_init(&kirkwood_mbus_dram_info,
XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
orion_xor0_init(XOR0_PHYS_BASE, XOR0_HIGH_PHYS_BASE,
IRQ_KIRKWOOD_XOR_00, IRQ_KIRKWOOD_XOR_01);
}
@ -364,7 +360,6 @@ static struct resource kirkwood_i2s_resources[] = {
};
static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
.dram = &kirkwood_mbus_dram_info,
.burst = 128,
};
@ -430,6 +425,8 @@ static char * __init kirkwood_id(void)
} else if (dev == MV88F6282_DEV_ID) {
if (rev == MV88F6282_REV_A0)
return "MV88F6282-Rev-A0";
else if (rev == MV88F6282_REV_A1)
return "MV88F6282-Rev-A1";
else
return "MV88F6282-Rev-Unsupported";
} else {

1
arch/arm/mach-kirkwood/common.h
View File

@ -30,7 +30,6 @@ void kirkwood_init(void);
void kirkwood_init_early(void);
void kirkwood_init_irq(void);
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
void kirkwood_setup_cpu_mbus(void);
void kirkwood_enable_pcie(void);

1
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View File

@ -135,4 +135,5 @@
#define MV88F6282_DEV_ID 0x6282
#define MV88F6282_REV_A0 0
#define MV88F6282_REV_A1 1
#endif

1
arch/arm/mach-kirkwood/mpp.c
View File

@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/mpp.h>

1
arch/arm/mach-kirkwood/mpp.h
View File

@ -102,6 +102,7 @@
#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )

4
arch/arm/mach-kirkwood/pcie.c
View File

@ -11,12 +11,12 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/bridge-regs.h>
#include <plat/addr-map.h>
#include "common.h"
void kirkwood_enable_pcie(void)
@ -208,7 +208,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &kirkwood_mbus_dram_info);
orion_pcie_setup(pp->base);
return 1;
}

102
arch/arm/mach-mv78xx0/addr-map.c
View File

@ -12,12 +12,12 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/addr-map.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCIE0 4
#define TARGET_PCIE1 8
@ -31,24 +31,11 @@
#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l)))
#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l)))
/*
* Helpers to get DDR bank info
*/
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
#define WIN_CTRL_OFF 0x0000
#define WIN_BASE_OFF 0x0004
#define WIN_REMAP_LO_OFF 0x0008
#define WIN_REMAP_HI_OFF 0x000c
struct mbus_dram_target_info mv78xx0_mbus_dram_info;
static void __init __iomem *win_cfg_base(int win)
{
@ -63,94 +50,43 @@ static void __init __iomem *win_cfg_base(int win)
return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
}
static int __init cpu_win_can_remap(int win)
{
if (win < 8)
return 1;
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
void __iomem *addr = win_cfg_base(win);
u32 ctrl;
base &= 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
if (cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
/*
* Description of the windows needed by the platform code
*/
static struct __initdata orion_addr_map_cfg addr_map_cfg = {
.num_wins = 14,
.remappable_wins = 8,
.win_cfg_base = win_cfg_base,
};
void __init mv78xx0_setup_cpu_mbus(void)
{
void __iomem *addr;
int i;
int cs;
/*
* First, disable and clear windows.
* Disable, clear and configure windows.
*/
for (i = 0; i < 14; i++) {
addr = win_cfg_base(i);
writel(0, addr + WIN_BASE_OFF);
writel(0, addr + WIN_CTRL_OFF);
if (cpu_win_can_remap(i)) {
writel(0, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
orion_config_wins(&addr_map_cfg, NULL);
/*
* Setup MBUS dram target info.
*/
mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
if (mv78xx0_core_index() == 0)
addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
orion_setup_cpu_mbus_target(&addr_map_cfg,
DDR_WINDOW_CPU0_BASE);
else
addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
for (i = 0, cs = 0; i < 4; i++) {
u32 base = readl(addr + DDR_BASE_CS_OFF(i));
u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
*/
if (size & 1) {
struct mbus_dram_window *w;
w = &mv78xx0_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
w->base = base & 0xffff0000;
w->size = (size | 0x0000ffff) + 1;
}
}
mv78xx0_mbus_dram_info.num_cs = cs;
orion_setup_cpu_mbus_target(&addr_map_cfg,
DDR_WINDOW_CPU1_BASE);
}
void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min)
{
setup_cpu_win(window, base, size, TARGET_PCIE(maj),
ATTR_PCIE_IO(min), -1);
orion_setup_cpu_win(&addr_map_cfg, window, base, size,
TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
}
void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min)
{
setup_cpu_win(window, base, size, TARGET_PCIE(maj),
ATTR_PCIE_MEM(min), -1);
orion_setup_cpu_win(&addr_map_cfg, window, base, size,
TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1);
}

22
arch/arm/mach-mv78xx0/common.c
View File

@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/ethtool.h>
#include <asm/mach/map.h>
@ -23,6 +22,7 @@
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
static int get_tclk(void);
@ -169,8 +169,7 @@ void __init mv78xx0_map_io(void)
****************************************************************************/
void __init mv78xx0_ehci0_init(void)
{
orion_ehci_init(&mv78xx0_mbus_dram_info,
USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0);
}
@ -179,8 +178,7 @@ void __init mv78xx0_ehci0_init(void)
****************************************************************************/
void __init mv78xx0_ehci1_init(void)
{
orion_ehci_1_init(&mv78xx0_mbus_dram_info,
USB1_PHYS_BASE, IRQ_MV78XX0_USB_1);
orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1);
}
@ -189,8 +187,7 @@ void __init mv78xx0_ehci1_init(void)
****************************************************************************/
void __init mv78xx0_ehci2_init(void)
{
orion_ehci_2_init(&mv78xx0_mbus_dram_info,
USB2_PHYS_BASE, IRQ_MV78XX0_USB_2);
orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2);
}
@ -199,7 +196,7 @@ void __init mv78xx0_ehci2_init(void)
****************************************************************************/
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data, &mv78xx0_mbus_dram_info,
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
IRQ_MV78XX0_GE_ERR, get_tclk());
}
@ -210,7 +207,7 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
****************************************************************************/
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge01_init(eth_data, &mv78xx0_mbus_dram_info,
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
NO_IRQ, get_tclk());
}
@ -234,7 +231,7 @@ void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
eth_data->duplex = DUPLEX_FULL;
}
orion_ge10_init(eth_data, &mv78xx0_mbus_dram_info,
orion_ge10_init(eth_data,
GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM,
NO_IRQ, get_tclk());
}
@ -258,7 +255,7 @@ void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
eth_data->duplex = DUPLEX_FULL;
}
orion_ge11_init(eth_data, &mv78xx0_mbus_dram_info,
orion_ge11_init(eth_data,
GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM,
NO_IRQ, get_tclk());
}
@ -277,8 +274,7 @@ void __init mv78xx0_i2c_init(void)
****************************************************************************/
void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
{
orion_sata_init(sata_data, &mv78xx0_mbus_dram_info,
SATA_PHYS_BASE, IRQ_MV78XX0_SATA);
orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA);
}

1
arch/arm/mach-mv78xx0/common.h
View File

@ -23,7 +23,6 @@ void mv78xx0_init(void);
void mv78xx0_init_early(void);
void mv78xx0_init_irq(void);
extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
void mv78xx0_setup_cpu_mbus(void);
void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min);

1
arch/arm/mach-mv78xx0/mpp.c
View File

@ -10,7 +10,6 @@
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/mpp.h>
#include <mach/hardware.h>

4
arch/arm/mach-mv78xx0/pcie.c
View File

@ -10,11 +10,11 @@
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <video/vga.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <plat/addr-map.h>
#include "common.h"
struct pcie_port {
@ -153,7 +153,7 @@ static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
orion_pcie_setup(pp->base);
sys->resource[0] = &pp->res[0];
sys->resource[1] = &pp->res[1];

64
arch/arm/mach-omap1/Kconfig
View File

@ -168,70 +168,6 @@ config MACH_OMAP_GENERIC
custom OMAP boards. Say Y here if you have a custom
board.
comment "OMAP CPU Speed"
depends on ARCH_OMAP1
config OMAP_ARM_216MHZ
bool "OMAP ARM 216 MHz CPU (1710 only)"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
help
Enable 216 MHz clock for OMAP1710 CPU. If unsure, say N.
config OMAP_ARM_195MHZ
bool "OMAP ARM 195 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 195MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_192MHZ
bool "OMAP ARM 192 MHz CPU"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
help
Enable 192MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_182MHZ
bool "OMAP ARM 182 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 182MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_168MHZ
bool "OMAP ARM 168 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 168MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_150MHZ
bool "OMAP ARM 150 MHz CPU"
depends on ARCH_OMAP1 && ARCH_OMAP15XX
help
Enable 150MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_120MHZ
bool "OMAP ARM 120 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 120MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_96MHZ
bool "OMAP ARM 96 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 96MHz clock for OMAP CPU. If unsure, say N.
config OMAP_ARM_60MHZ
bool "OMAP ARM 60 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
default y
help
Enable 60MHz clock for OMAP CPU. If unsure, say Y.
config OMAP_ARM_30MHZ
bool "OMAP ARM 30 MHz CPU"
depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX || ARCH_OMAP730 || ARCH_OMAP850)
help
Enable 30MHz clock for OMAP CPU. If unsure, say N.
endmenu
endif

14
arch/arm/mach-omap1/clock.c
View File

@ -197,11 +197,10 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
ref_rate = ck_ref_p->rate;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (ptr->xtal != ref_rate)
if (!(ptr->flags & cpu_mask))
continue;
/* DPLL1 cannot be reprogrammed without risking system crash */
if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate)
if (ptr->xtal != ref_rate)
continue;
/* Can check only after xtal frequency check */
@ -215,12 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
/*
* In most cases we should not need to reprogram DPLL.
* Reprogramming the DPLL is tricky, it must be done from SRAM.
* (on 730, bit 13 must always be 1)
*/
if (cpu_is_omap7xx())
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
else
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
ck_dpll1_p->rate = ptr->pll_rate;
@ -290,6 +285,9 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
highest_rate = -EINVAL;
for (ptr = omap1_rate_table; ptr->rate; ptr++) {
if (!(ptr->flags & cpu_mask))
continue;
if (ptr->xtal != ref_rate)
continue;

3
arch/arm/mach-omap1/clock.h
View File

@ -111,4 +111,7 @@ extern const struct clkops clkops_dummy;
extern const struct clkops clkops_uart_16xx;
extern const struct clkops clkops_generic;
/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
extern u32 cpu_mask;
#endif

19
arch/arm/mach-omap1/clock_data.c
View File

@ -25,6 +25,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include <plat/usb.h> /* for OTG_BASE */
#include "clock.h"
@ -778,12 +779,14 @@ static void __init omap1_show_rates(void)
arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
}
u32 cpu_mask;
int __init omap1_clk_init(void)
{
struct omap_clk *c;
const struct omap_clock_config *info;
int crystal_type = 0; /* Default 12 MHz */
u32 reg, cpu_mask;
u32 reg;
#ifdef CONFIG_DEBUG_LL
/*
@ -808,6 +811,8 @@ int __init omap1_clk_init(void)
clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap1710())
cpu_mask |= CK_1710;
if (cpu_is_omap16xx())
cpu_mask |= CK_16XX;
if (cpu_is_omap1510())
@ -931,17 +936,13 @@ void __init omap1_clk_late_init(void)
{
unsigned long rate = ck_dpll1.rate;
if (rate >= OMAP1_DPLL1_SANE_VALUE)
return;
/* System booting at unusable rate, force reprogramming of DPLL1 */
ck_dpll1_p->rate = 0;
/* Find the highest supported frequency and enable it */
if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
pr_err("System frequencies not set, using default. Check your config.\n");
omap_writew(0x2290, DPLL_CTL);
omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL);
/*
* Reprogramming the DPLL is tricky, it must be done from SRAM.
*/
omap_sram_reprogram_clock(0x2290, 0x0005);
ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
}
propagate_rate(&ck_dpll1);

1
arch/arm/mach-omap1/opp.h
View File

@ -21,6 +21,7 @@ struct mpu_rate {
unsigned long pll_rate;
__u16 ckctl_val;
__u16 dpllctl_val;
u32 flags;
};
extern struct mpu_rate omap1_rate_table[];

63
arch/arm/mach-omap1/opp_data.c
View File

@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
#include <plat/clkdev_omap.h>
#include "opp.h"
/*-------------------------------------------------------------------------
@ -20,40 +21,34 @@ struct mpu_rate omap1_rate_table[] = {
* NOTE: Comment order here is different from bits in CKCTL value:
* armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
*/
#if defined(CONFIG_OMAP_ARM_216MHZ)
{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
#endif
#if defined(CONFIG_OMAP_ARM_195MHZ)
{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
#endif
#if defined(CONFIG_OMAP_ARM_192MHZ)
{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
{ 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
{ 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
{ 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
#endif
#if defined(CONFIG_OMAP_ARM_182MHZ)
{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
#endif
#if defined(CONFIG_OMAP_ARM_168MHZ)
{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
#endif
#if defined(CONFIG_OMAP_ARM_150MHZ)
{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
#endif
#if defined(CONFIG_OMAP_ARM_120MHZ)
{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
#endif
#if defined(CONFIG_OMAP_ARM_96MHZ)
{ 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
#endif
#if defined(CONFIG_OMAP_ARM_60MHZ)
{ 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
#endif
#if defined(CONFIG_OMAP_ARM_30MHZ)
{ 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
#endif
{ 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */
CK_1710 },
{ 195000000, 13000000, 195000000, 0x050e, 0x2790, /* 1/1/2/2/4/8 */
CK_7XX },
{ 192000000, 19200000, 192000000, 0x050f, 0x2510, /* 1/1/2/2/8/8 */
CK_16XX },
{ 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */
CK_16XX },
{ 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */
CK_16XX },
{ 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */
CK_16XX },
{ 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */
CK_16XX },
{ 182000000, 13000000, 182000000, 0x050e, 0x2710, /* 1/1/2/2/4/8 */
CK_7XX },
{ 168000000, 12000000, 168000000, 0x010f, 0x2710, /* 1/1/1/2/8/8 */
CK_16XX|CK_7XX },
{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0, /* 1/1/1/2/4/4 */
CK_1510 },
{ 120000000, 12000000, 120000000, 0x010a, 0x2510, /* 1/1/1/2/4/4 */
CK_16XX|CK_1510|CK_310|CK_7XX },
{ 96000000, 12000000, 96000000, 0x0005, 0x2410, /* 1/1/1/1/2/2 */
CK_16XX|CK_1510|CK_310|CK_7XX },
{ 60000000, 12000000, 60000000, 0x0005, 0x2290, /* 1/1/1/1/2/2 */
CK_16XX|CK_1510|CK_310|CK_7XX },
{ 30000000, 12000000, 60000000, 0x0555, 0x2290, /* 2/2/2/2/2/2 */
CK_16XX|CK_1510|CK_310|CK_7XX },
{ 0, 0, 0, 0, 0 },
};

11
arch/arm/mach-omap2/clock3xxx_data.c
View File

@ -2480,6 +2480,16 @@ static struct clk uart4_fck = {
.recalc = &followparent_recalc,
};
static struct clk uart4_fck_am35xx = {
.name = "uart4_fck",
.ops = &clkops_omap2_dflt_wait,
.parent = &per_48m_fck,
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP3430_EN_UART4_SHIFT,
.clkdm_name = "core_l4_clkdm",
.recalc = &followparent_recalc,
};
static struct clk gpt2_fck = {
.name = "gpt2_fck",
.ops = &clkops_omap2_dflt_wait,
@ -3403,6 +3413,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX),
CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),

374
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -84,6 +84,8 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod;
static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@ -164,6 +166,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod;
static struct omap_hwmod omap3xxx_uart2_hwmod;
static struct omap_hwmod omap3xxx_uart3_hwmod;
static struct omap_hwmod omap3xxx_uart4_hwmod;
static struct omap_hwmod am35xx_uart4_hwmod;
static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
/* l3_core -> usbhsotg interface */
@ -299,6 +302,23 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* AM35xx: L4 CORE -> UART4 interface */
static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
{
.pa_start = OMAP3_UART4_AM35XX_BASE,
.pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &am35xx_uart4_hwmod,
.clk = "uart4_ick",
.addr = am35xx_uart4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
.master = &omap3xxx_l4_core_hwmod,
@ -1162,6 +1182,7 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = {
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@ -1309,6 +1330,39 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
.class = &omap2_uart_class,
};
static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
{ .irq = INT_35XX_UART4_IRQ, },
};
static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
{ .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
{ .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
};
static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
&am35xx_l4_core__uart4,
};
static struct omap_hwmod am35xx_uart4_hwmod = {
.name = "uart4",
.mpu_irqs = am35xx_uart4_mpu_irqs,
.sdma_reqs = am35xx_uart4_sdma_reqs,
.main_clk = "uart4_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_UART4_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
},
},
.slaves = am35xx_uart4_slaves,
.slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves),
.class = &omap2_uart_class,
};
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
@ -1636,7 +1690,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@ -1670,7 +1724,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@ -1715,7 +1769,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = i2c3_mpu_irqs,
.sdma_reqs = i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
@ -3072,7 +3126,35 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
static struct omap_hwmod omap3xxx_mmc1_hwmod = {
/* See 35xx errata 2.1.1.128 in SPRZ278F */
static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
.name = "mmc1",
.mpu_irqs = omap34xx_mmc1_mpu_irqs,
.sdma_reqs = omap34xx_mmc1_sdma_reqs,
.opt_clks = omap34xx_mmc1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
.main_clk = "mmchs1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_MMC1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
},
},
.dev_attr = &mmc1_pre_es3_dev_attr,
.slaves = omap3xxx_mmc1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
};
static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
.name = "mmc1",
.mpu_irqs = omap34xx_mmc1_mpu_irqs,
.sdma_reqs = omap34xx_mmc1_sdma_reqs,
@ -3115,7 +3197,34 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = {
&omap3xxx_l4_core__mmc2,
};
static struct omap_hwmod omap3xxx_mmc2_hwmod = {
/* See 35xx errata 2.1.1.128 in SPRZ278F */
static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
};
static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
.name = "mmc2",
.mpu_irqs = omap34xx_mmc2_mpu_irqs,
.sdma_reqs = omap34xx_mmc2_sdma_reqs,
.opt_clks = omap34xx_mmc2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
.main_clk = "mmchs2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_MMC2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
},
},
.dev_attr = &mmc2_pre_es3_dev_attr,
.slaves = omap3xxx_mmc2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
};
static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
.name = "mmc2",
.mpu_irqs = omap34xx_mmc2_mpu_irqs,
.sdma_reqs = omap34xx_mmc2_sdma_reqs,
@ -3177,13 +3286,223 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
.class = &omap34xx_mmc_class,
};
/*
* 'usb_host_hs' class
* high-speed multi-port usb host controller
*/
static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
.master = &omap3xxx_usb_host_hs_hwmod,
.slave = &omap3xxx_l3_main_hwmod,
.clk = "core_l3_ick",
.user = OCP_USER_MPU,
};
static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
.name = "usb_host_hs",
.sysc = &omap3xxx_usb_host_hs_sysc,
};
static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
&omap3xxx_usb_host_hs__l3_main_2,
};
static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
{
.name = "uhh",
.pa_start = 0x48064000,
.pa_end = 0x480643ff,
.flags = ADDR_TYPE_RT
},
{
.name = "ohci",
.pa_start = 0x48064400,
.pa_end = 0x480647ff,
},
{
.name = "ehci",
.pa_start = 0x48064800,
.pa_end = 0x48064cff,
},
{}
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usb_host_hs_hwmod,
.clk = "usbhost_ick",
.addr = omap3xxx_usb_host_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
&omap3xxx_l4_core__usb_host_hs,
};
static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
{ .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
};
static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
{ .name = "ohci-irq", .irq = 76 },
{ .name = "ehci-irq", .irq = 77 },
{ .irq = -1 }
};
static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
.name = "usb_host_hs",
.class = &omap3xxx_usb_host_hs_hwmod_class,
.clkdm_name = "l3_init_clkdm",
.mpu_irqs = omap3xxx_usb_host_hs_irqs,
.main_clk = "usbhost_48m_fck",
.prcm = {
.omap2 = {
.module_offs = OMAP3430ES2_USBHOST_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
.idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
},
},
.opt_clks = omap3xxx_usb_host_hs_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
.slaves = omap3xxx_usb_host_hs_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
.masters = omap3xxx_usb_host_hs_masters,
.masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
/*
* Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
* id: i660
*
* Description:
* In the following configuration :
* - USBHOST module is set to smart-idle mode
* - PRCM asserts idle_req to the USBHOST module ( This typically
* happens when the system is going to a low power mode : all ports
* have been suspended, the master part of the USBHOST module has
* entered the standby state, and SW has cut the functional clocks)
* - an USBHOST interrupt occurs before the module is able to answer
* idle_ack, typically a remote wakeup IRQ.
* Then the USB HOST module will enter a deadlock situation where it
* is no more accessible nor functional.
*
* Workaround:
* Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
*/
/*
* Errata: USB host EHCI may stall when entering smart-standby mode
* Id: i571
*
* Description:
* When the USBHOST module is set to smart-standby mode, and when it is
* ready to enter the standby state (i.e. all ports are suspended and
* all attached devices are in suspend mode), then it can wrongly assert
* the Mstandby signal too early while there are still some residual OCP
* transactions ongoing. If this condition occurs, the internal state
* machine may go to an undefined state and the USB link may be stuck
* upon the next resume.
*
* Workaround:
* Don't use smart standby; use only force standby,
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
};
/*
* 'usb_tll_hs' class
* usb_tll_hs module is the adapter on the usb_host_hs ports
*/
static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
.name = "usb_tll_hs",
.sysc = &omap3xxx_usb_tll_hs_sysc,
};
static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
{ .name = "tll-irq", .irq = 78 },
{ .irq = -1 }
};
static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
{
.name = "tll",
.pa_start = 0x48062000,
.pa_end = 0x48062fff,
.flags = ADDR_TYPE_RT
},
{}
};
static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_usb_tll_hs_hwmod,
.clk = "usbtll_ick",
.addr = omap3xxx_usb_tll_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
&omap3xxx_l4_core__usb_tll_hs,
};
static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
.name = "usb_tll_hs",
.class = &omap3xxx_usb_tll_hs_hwmod_class,
.clkdm_name = "l3_init_clkdm",
.mpu_irqs = omap3xxx_usb_tll_hs_irqs,
.main_clk = "usbtll_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 3,
.module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
.idlest_reg_id = 3,
.idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
},
},
.slaves = omap3xxx_usb_tll_hs_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
&omap3xxx_l4_per_hwmod,
&omap3xxx_l4_wkup_hwmod,
&omap3xxx_mmc1_hwmod,
&omap3xxx_mmc2_hwmod,
&omap3xxx_mmc3_hwmod,
&omap3xxx_mpu_hwmod,
@ -3203,6 +3522,7 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
/* dss class */
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
@ -3260,6 +3580,22 @@ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
&omap3xxx_usb_host_hs_hwmod,
&omap3xxx_usb_tll_hs_hwmod,
NULL
};
/* <= 3430ES3-only hwmods */
static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
&omap3xxx_pre_es3_mmc1_hwmod,
&omap3xxx_pre_es3_mmc2_hwmod,
NULL
};
/* 3430ES3+-only hwmods */
static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
&omap3xxx_es3plus_mmc1_hwmod,
&omap3xxx_es3plus_mmc2_hwmod,
NULL
};
@ -3281,12 +3617,21 @@ static __initdata struct omap_hwmod *omap36xx_hwmods[] = {
&omap36xx_sr2_hwmod,
&omap3xxx_usbhsotg_hwmod,
&omap3xxx_mailbox_hwmod,
&omap3xxx_usb_host_hs_hwmod,
&omap3xxx_usb_tll_hs_hwmod,
&omap3xxx_es3plus_mmc1_hwmod,
&omap3xxx_es3plus_mmc2_hwmod,
NULL
};
static __initdata struct omap_hwmod *am35xx_hwmods[] = {
&omap3xxx_dss_core_hwmod, /* XXX ??? */
&am35xx_usbhsotg_hwmod,
&am35xx_uart4_hwmod,
&omap3xxx_usb_host_hs_hwmod,
&omap3xxx_usb_tll_hs_hwmod,
&omap3xxx_es3plus_mmc1_hwmod,
&omap3xxx_es3plus_mmc2_hwmod,
NULL
};
@ -3346,6 +3691,21 @@ int __init omap3xxx_hwmod_init(void)
h = omap3430es2plus_hwmods;
};
if (h) {
r = omap_hwmod_register(h);
if (r < 0)
return r;
}
h = NULL;
if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
rev == OMAP3430_REV_ES2_1) {
h = omap3430_pre_es3_hwmods;
} else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
rev == OMAP3430_REV_ES3_1_2) {
h = omap3430_es3plus_hwmods;
};
if (h)
r = omap_hwmod_register(h);

217
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -70,6 +70,8 @@ static struct omap_hwmod omap44xx_mmc2_hwmod;
static struct omap_hwmod omap44xx_mpu_hwmod;
static struct omap_hwmod omap44xx_mpu_private_hwmod;
static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
/*
* Interconnects omap_hwmod structures
@ -2246,6 +2248,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@ -2300,7 +2303,7 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = {
.name = "i2c1",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c1_irqs,
.sdma_reqs = omap44xx_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@ -2356,7 +2359,7 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = {
.name = "i2c2",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c2_irqs,
.sdma_reqs = omap44xx_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@ -2412,7 +2415,7 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = {
.name = "i2c3",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c3_irqs,
.sdma_reqs = omap44xx_i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
@ -2468,7 +2471,7 @@ static struct omap_hwmod omap44xx_i2c4_hwmod = {
.name = "i2c4",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
.flags = HWMOD_16BIT_REG,
.flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c4_irqs,
.sdma_reqs = omap44xx_i2c4_sdma_reqs,
.main_clk = "i2c4_fck",
@ -5276,6 +5279,207 @@ static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
};
/*
* 'usb_host_hs' class
* high-speed multi-port usb host controller
*/
static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
.master = &omap44xx_usb_host_hs_hwmod,
.slave = &omap44xx_l3_main_2_hwmod,
.clk = "l3_div_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
.sysc_fields = &omap_hwmod_sysc_type2,
};
static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
.name = "usb_host_hs",
.sysc = &omap44xx_usb_host_hs_sysc,
};
static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
&omap44xx_usb_host_hs__l3_main_2,
};
static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
{
.name = "uhh",
.pa_start = 0x4a064000,
.pa_end = 0x4a0647ff,
.flags = ADDR_TYPE_RT
},
{
.name = "ohci",
.pa_start = 0x4a064800,
.pa_end = 0x4a064bff,
},
{
.name = "ehci",
.pa_start = 0x4a064c00,
.pa_end = 0x4a064fff,
},
{}
};
static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
{ .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
{ .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_host_hs_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_usb_host_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
&omap44xx_l4_cfg__usb_host_hs,
};
static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
.name = "usb_host_hs",
.class = &omap44xx_usb_host_hs_hwmod_class,
.clkdm_name = "l3_init_clkdm",
.main_clk = "usb_host_hs_fck",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
.mpu_irqs = omap44xx_usb_host_hs_irqs,
.slaves = omap44xx_usb_host_hs_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
.masters = omap44xx_usb_host_hs_masters,
.masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters),
/*
* Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
* id: i660
*
* Description:
* In the following configuration :
* - USBHOST module is set to smart-idle mode
* - PRCM asserts idle_req to the USBHOST module ( This typically
* happens when the system is going to a low power mode : all ports
* have been suspended, the master part of the USBHOST module has
* entered the standby state, and SW has cut the functional clocks)
* - an USBHOST interrupt occurs before the module is able to answer
* idle_ack, typically a remote wakeup IRQ.
* Then the USB HOST module will enter a deadlock situation where it
* is no more accessible nor functional.
*
* Workaround:
* Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
*/
/*
* Errata: USB host EHCI may stall when entering smart-standby mode
* Id: i571
*
* Description:
* When the USBHOST module is set to smart-standby mode, and when it is
* ready to enter the standby state (i.e. all ports are suspended and
* all attached devices are in suspend mode), then it can wrongly assert
* the Mstandby signal too early while there are still some residual OCP
* transactions ongoing. If this condition occurs, the internal state
* machine may go to an undefined state and the USB link may be stuck
* upon the next resume.
*
* Workaround:
* Don't use smart standby; use only force standby,
* hence HWMOD_SWSUP_MSTANDBY
*/
/*
* During system boot; If the hwmod framework resets the module
* the module will have smart idle settings; which can lead to deadlock
* (above Errata Id:i660); so, dont reset the module during boot;
* Use HWMOD_INIT_NO_RESET.
*/
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
HWMOD_INIT_NO_RESET,
};
/*
* 'usb_tll_hs' class
* usb_tll_hs module is the adapter on the usb_host_hs ports
*/
static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
.syss_offs = 0x0014,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
.name = "usb_tll_hs",
.sysc = &omap44xx_usb_tll_hs_sysc,
};
static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
{ .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
{
.name = "tll",
.pa_start = 0x4a062000,
.pa_end = 0x4a063fff,
.flags = ADDR_TYPE_RT
},
{}
};
static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
.master = &omap44xx_l4_cfg_hwmod,
.slave = &omap44xx_usb_tll_hs_hwmod,
.clk = "l4_div_ck",
.addr = omap44xx_usb_tll_hs_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
&omap44xx_l4_cfg__usb_tll_hs,
};
static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
.name = "usb_tll_hs",
.class = &omap44xx_usb_tll_hs_hwmod_class,
.clkdm_name = "l3_init_clkdm",
.main_clk = "usb_tll_hs_ick",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
.modulemode = MODULEMODE_HWCTRL,
},
},
.mpu_irqs = omap44xx_usb_tll_hs_irqs,
.slaves = omap44xx_usb_tll_hs_slaves,
.slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
};
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* dmm class */
@ -5415,13 +5619,16 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
&omap44xx_uart3_hwmod,
&omap44xx_uart4_hwmod,
/* usb host class */
&omap44xx_usb_host_hs_hwmod,
&omap44xx_usb_tll_hs_hwmod,
/* usb_otg_hs class */
&omap44xx_usb_otg_hs_hwmod,
/* wd_timer class */
&omap44xx_wd_timer2_hwmod,
&omap44xx_wd_timer3_hwmod,
NULL,
};

2
arch/arm/mach-omap2/prcm-common.h
View File

@ -201,6 +201,8 @@
#define OMAP3430_EN_MMC2_SHIFT 25
#define OMAP3430_EN_MMC1_MASK (1 << 24)
#define OMAP3430_EN_MMC1_SHIFT 24
#define OMAP3430_EN_UART4_MASK (1 << 23)
#define OMAP3430_EN_UART4_SHIFT 23
#define OMAP3430_EN_MCSPI4_MASK (1 << 21)
#define OMAP3430_EN_MCSPI4_SHIFT 21
#define OMAP3430_EN_MCSPI3_MASK (1 << 20)

150
arch/arm/mach-orion5x/addr-map.c
View File

@ -14,8 +14,8 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <mach/hardware.h>
#include <plat/addr-map.h>
#include "common.h"
/*
@ -41,7 +41,6 @@
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
@ -57,27 +56,10 @@
#define ATTR_DEV_BOOT 0xf
#define ATTR_SRAM 0x0
/*
* Helpers to get DDR bank info
*/
#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
struct mbus_dram_target_info orion5x_mbus_dram_info;
static int __initdata win_alloc_count;
static int __init orion5x_cpu_win_can_remap(int win)
static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
const int win)
{
u32 dev, rev;
@ -91,116 +73,82 @@ static int __init orion5x_cpu_win_can_remap(int win)
return 0;
}
static int __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
if (win >= 8) {
printk(KERN_ERR "setup_cpu_win: trying to allocate "
"window %d\n", win);
return -ENOSPC;
}
writel(base & 0xffff0000, CPU_WIN_BASE(win));
writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
CPU_WIN_CTRL(win));
if (orion5x_cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
writel(0, CPU_WIN_REMAP_HI(win));
}
return 0;
}
void __init orion5x_setup_cpu_mbus_bridge(void)
{
int i;
int cs;
/*
* First, disable and clear windows.
*/
for (i = 0; i < 8; i++) {
writel(0, CPU_WIN_BASE(i));
writel(0, CPU_WIN_CTRL(i));
if (orion5x_cpu_win_can_remap(i)) {
writel(0, CPU_WIN_REMAP_LO(i));
writel(0, CPU_WIN_REMAP_HI(i));
}
}
/*
* Description of the windows needed by the platform code
*/
static struct __initdata orion_addr_map_cfg addr_map_cfg = {
.num_wins = 8,
.cpu_win_can_remap = cpu_win_can_remap,
.bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
};
static const struct __initdata orion_addr_map_info addr_map_info[] = {
/*
* Setup windows for PCI+PCIe IO+MEM space.
*/
setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE);
setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE);
setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE_MEM, -1);
setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
TARGET_PCI, ATTR_PCI_MEM, -1);
{ 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
},
{ 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
},
{ 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
TARGET_PCIE, ATTR_PCIE_MEM, -1
},
{ 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
TARGET_PCI, ATTR_PCI_MEM, -1
},
/* End marker */
{ -1, 0, 0, 0, 0, 0 }
};
void __init orion5x_setup_cpu_mbus_bridge(void)
{
/*
* Disable, clear and configure windows.
*/
orion_config_wins(&addr_map_cfg, addr_map_info);
win_alloc_count = 4;
/*
* Setup MBUS dram target info.
*/
orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
for (i = 0, cs = 0; i < 4; i++) {
u32 base = readl(DDR_BASE_CS(i));
u32 size = readl(DDR_SIZE_CS(i));
/*
* Chip select enabled?
*/
if (size & 1) {
struct mbus_dram_window *w;
w = &orion5x_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
w->base = base & 0xffff0000;
w->size = (size | 0x0000ffff) + 1;
}
}
orion5x_mbus_dram_info.num_cs = cs;
orion_setup_cpu_mbus_target(&addr_map_cfg, ORION5X_DDR_WINDOW_CPU_BASE);
}
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
{
setup_cpu_win(win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
}
void __init orion5x_setup_dev0_win(u32 base, u32 size)
{
setup_cpu_win(win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
}
void __init orion5x_setup_dev1_win(u32 base, u32 size)
{
setup_cpu_win(win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
}
void __init orion5x_setup_dev2_win(u32 base, u32 size)
{
setup_cpu_win(win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
}
void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
setup_cpu_win(win_alloc_count++, base, size,
TARGET_PCIE, ATTR_PCIE_WA, -1);
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
TARGET_PCIE, ATTR_PCIE_WA, -1);
}
int __init orion5x_setup_sram_win(void)
void __init orion5x_setup_sram_win(void)
{
return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE,
ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
TARGET_SRAM, ATTR_SRAM, -1);
}

23
arch/arm/mach-orion5x/common.c
View File

@ -15,7 +15,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/delay.h>
@ -32,6 +31,7 @@
#include <plat/orion_nand.h>
#include <plat/time.h>
#include <plat/common.h>
#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@ -72,8 +72,7 @@ void __init orion5x_map_io(void)
****************************************************************************/
void __init orion5x_ehci0_init(void)
{
orion_ehci_init(&orion5x_mbus_dram_info,
ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL);
}
@ -82,8 +81,7 @@ void __init orion5x_ehci0_init(void)
****************************************************************************/
void __init orion5x_ehci1_init(void)
{
orion_ehci_1_init(&orion5x_mbus_dram_info,
ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL);
orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL);
}
@ -92,7 +90,7 @@ void __init orion5x_ehci1_init(void)
****************************************************************************/
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
{
orion_ge00_init(eth_data, &orion5x_mbus_dram_info,
orion_ge00_init(eth_data,
ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
IRQ_ORION5X_ETH_ERR, orion5x_tclk);
}
@ -122,8 +120,7 @@ void __init orion5x_i2c_init(void)
****************************************************************************/
void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
{
orion_sata_init(sata_data, &orion5x_mbus_dram_info,
ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA);
orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA);
}
@ -159,8 +156,7 @@ void __init orion5x_uart1_init(void)
****************************************************************************/
void __init orion5x_xor_init(void)
{
orion_xor0_init(&orion5x_mbus_dram_info,
ORION5X_XOR_PHYS_BASE,
orion_xor0_init(ORION5X_XOR_PHYS_BASE,
ORION5X_XOR_PHYS_BASE + 0x200,
IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1);
}
@ -170,12 +166,7 @@ void __init orion5x_xor_init(void)
****************************************************************************/
static void __init orion5x_crypto_init(void)
{
int ret;
ret = orion5x_setup_sram_win();
if (ret)
return;
orion5x_setup_sram_win();
orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
SZ_8K, IRQ_ORION5X_CESA);
}

3
arch/arm/mach-orion5x/common.h
View File

@ -20,14 +20,13 @@ extern struct sys_timer orion5x_timer;
* functions to map its interfaces and by the machine-setup to map its on-
* board devices. Details in /mach-orion/addr-map.c
*/
extern struct mbus_dram_target_info orion5x_mbus_dram_info;
void orion5x_setup_cpu_mbus_bridge(void);
void orion5x_setup_dev_boot_win(u32 base, u32 size);
void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
int orion5x_setup_sram_win(void);
void orion5x_setup_sram_win(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);

2
arch/arm/mach-orion5x/include/mach/orion5x.h
View File

@ -69,7 +69,7 @@
******************************************************************************/
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500)
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))

1
arch/arm/mach-orion5x/mpp.c
View File

@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <plat/mpp.h>

5
arch/arm/mach-orion5x/pci.c
View File

@ -18,6 +18,7 @@
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <plat/addr-map.h>
#include "common.h"
/*****************************************************************************
@ -145,7 +146,7 @@ static int __init pcie_setup(struct pci_sys_data *sys)
/*
* Generic PCIe unit setup.
*/
orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info);
orion_pcie_setup(PCIE_BASE);
/*
* Check whether to apply Orion-1/Orion-NAS PCIe config
@ -477,7 +478,7 @@ static int __init pci_setup(struct pci_sys_data *sys)
/*
* Point PCI unit MBUS decode windows to DRAM space.
*/
orion5x_setup_pci_wins(&orion5x_mbus_dram_info);
orion5x_setup_pci_wins(&orion_mbus_dram_info);
/*
* Master + Slave enable

37
arch/arm/mach-picoxcell/common.c
View File

@ -7,6 +7,7 @@
*
* All enquiries to support@picochip.com
*/
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
@ -23,6 +24,26 @@
#include "common.h"
#define WDT_CTRL_REG_EN_MASK (1 << 0)
#define WDT_CTRL_REG_OFFS (0x00)
#define WDT_TIMEOUT_REG_OFFS (0x04)
static void __iomem *wdt_regs;
/*
* The machine restart method can be called from an atomic context so we won't
* be able to ioremap the regs then.
*/
static void picoxcell_setup_restart(void)
{
struct device_node *np = of_find_compatible_node(NULL, NULL,
"snps,dw-apb-wdg");
if (WARN(!np, "unable to setup watchdog restart"))
return;
wdt_regs = of_iomap(np, 0);
WARN(!wdt_regs, "failed to remap watchdog regs");
}
static struct map_desc io_map __initdata = {
.virtual = PHYS_TO_IO(PICOXCELL_PERIPH_BASE),
.pfn = __phys_to_pfn(PICOXCELL_PERIPH_BASE),
@ -38,6 +59,7 @@ static void __init picoxcell_map_io(void)
static void __init picoxcell_init_machine(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
picoxcell_setup_restart();
}
static const char *picoxcell_dt_match[] = {
@ -56,6 +78,20 @@ static void __init picoxcell_init_irq(void)
of_irq_init(vic_of_match);
}
static void picoxcell_wdt_restart(char mode, const char *cmd)
{
/*
* Configure the watchdog to reset with the shortest possible timeout
* and give it chance to do the reset.
*/
if (wdt_regs) {
writel_relaxed(WDT_CTRL_REG_EN_MASK, wdt_regs + WDT_CTRL_REG_OFFS);
writel_relaxed(0, wdt_regs + WDT_TIMEOUT_REG_OFFS);
/* No sleeping, possibly atomic. */
mdelay(500);
}
}
DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.map_io = picoxcell_map_io,
.nr_irqs = NR_IRQS_LEGACY,
@ -64,4 +100,5 @@ DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
.timer = &picoxcell_timer,
.init_machine = picoxcell_init_machine,
.dt_compat = picoxcell_dt_match,
.restart = picoxcell_wdt_restart,
MACHINE_END

88
arch/arm/mach-ux500/board-mop500-sdi.c
View File

@ -21,6 +21,12 @@
#include "board-mop500.h"
#include "ste-dma40-db8500.h"
/*
* v2 has a new version of this block that need to be forced, the number found
* in hardware is incorrect
*/
#define U8500_SDI_V2_PERIPHID 0x10480180
/*
* SDI 0 (MicroSD slot)
*/
@ -117,10 +123,7 @@ static void sdi0_configure(void)
gpio_direction_output(sdi0_en, 1);
/* Add the device, force v2 to subrevision 1 */
if (cpu_is_u8500v2())
db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
else
db8500_add_sdi0(&mop500_sdi0_data, 0);
db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
}
void mop500_sdi_tc35892_init(void)
@ -131,6 +134,42 @@ void mop500_sdi_tc35892_init(void)
sdi0_configure();
}
/*
* SDI1 (SDIO WLAN)
*/
#ifdef CONFIG_STE_DMA40
static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.src_dev_type = DB8500_DMA_DEV32_SD_MM1_RX,
.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
.dst_dev_type = DB8500_DMA_DEV32_SD_MM1_TX,
.src_info.data_width = STEDMA40_WORD_WIDTH,
.dst_info.data_width = STEDMA40_WORD_WIDTH,
};
#endif
static struct mmci_platform_data mop500_sdi1_data = {
.ocr_mask = MMC_VDD_29_30,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &sdi1_dma_cfg_rx,
.dma_tx_param = &sdi1_dma_cfg_tx,
#endif
};
/*
* SDI 2 (POP eMMC, not on DB8500ed)
*/
@ -158,7 +197,8 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
static struct mmci_platform_data mop500_sdi2_data = {
.ocr_mask = MMC_VDD_165_195,
.f_max = 50000000,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED,
.gpio_cd = -1,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
@ -208,20 +248,10 @@ static struct mmci_platform_data mop500_sdi4_data = {
void __init mop500_sdi_init(void)
{
u32 periphid = 0;
/* v2 has a new version of this block that need to be forced */
if (cpu_is_u8500v2())
periphid = 0x10480180;
/* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* PoP:ed eMMC */
db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
@ -231,13 +261,9 @@ void __init mop500_sdi_init(void)
void __init snowball_sdi_init(void)
{
u32 periphid = 0x10480180;
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/* External Micro SD slot */
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
mop500_sdi0_data.cd_invert = true;
sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
@ -247,17 +273,15 @@ void __init snowball_sdi_init(void)
void __init hrefv60_sdi_init(void)
{
u32 periphid = 0x10480180;
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
db8500_add_sdi2(&mop500_sdi2_data, periphid);
/* PoP:ed eMMC */
db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data, periphid);
db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/* External Micro SD slot */
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
sdi0_en = HREFV60_SDMMC_EN_GPIO;
sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
sdi0_configure();
/* WLAN SDIO channel */
db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
}

2
arch/arm/mach-ux500/board-mop500.c
View File

@ -673,7 +673,7 @@ static void __init hrefv60_init_machine(void)
ARRAY_SIZE(mop500_platform_devs));
mop500_i2c_init();
mop500_sdi_init();
hrefv60_sdi_init();
mop500_spi_init();
mop500_uart_init();

63
arch/arm/mach-ux500/board-mop500.h
View File

@ -7,40 +7,77 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
/* snowball GPIO for MMC card */
#define SNOWBALL_SDMMC_EN_GPIO 217
#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
#define SNOWBALL_SDMMC_CD_GPIO 218
/* Snowball specific GPIO assignments, this board has no GPIO expander */
#define SNOWBALL_ACCEL_INT1_GPIO 163
#define SNOWBALL_ACCEL_INT2_GPIO 164
#define SNOWBALL_MAGNET_DRDY_GPIO 165
#define SNOWBALL_SDMMC_EN_GPIO 217
#define SNOWBALL_SDMMC_1V8_3V_GPIO 228
#define SNOWBALL_SDMMC_CD_GPIO 218
/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
#define HREFV60_TOUCH_RST_GPIO 143
#define HREFV60_PROX_SENSE_GPIO 217
#define HREFV60_HAL_SW_GPIO 145
#define HREFV60_SDMMC_EN_GPIO 169
#define HREFV60_SDMMC_1V8_3V_GPIO 5
#define HREFV60_SDMMC_CD_GPIO 95
#define HREFV60_ACCEL_INT1_GPIO 82
#define HREFV60_ACCEL_INT2_GPIO 83
#define HREFV60_CAMERA_FLASH_ENABLE 21
#define HREFV60_MAGNET_DRDY_GPIO 32
#define HREFV60_DISP1_RST_GPIO 65
#define HREFV60_DISP2_RST_GPIO 66
#define HREFV60_ACCEL_INT1_GPIO 82
#define HREFV60_ACCEL_INT2_GPIO 83
#define HREFV60_SDMMC_CD_GPIO 95
#define HREFV60_XSHUTDOWN_SECONDARY_SENSOR 140
#define HREFV60_TOUCH_RST_GPIO 143
#define HREFV60_HAL_SW_GPIO 145
#define HREFV60_SDMMC_EN_GPIO 169
#define HREFV60_MMIO_XENON_CHARGE 170
#define HREFV60_PROX_SENSE_GPIO 217
/* MOP500 generic GPIOs */
#define CAMERA_FLASH_INT_PIN 7
#define CYPRESS_TOUCH_INT_PIN 84
#define XSHUTDOWN_PRIMARY_SENSOR 141
#define XSHUTDOWN_SECONDARY_SENSOR 142
#define CYPRESS_TOUCH_RST_GPIO 143
#define MOP500_HDMI_RST_GPIO 196
#define CYPRESS_SLAVE_SELECT_GPIO 216
/* GPIOs on the TC35892 expander */
#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
#define GPIO_MAGNET_DRDY MOP500_EGPIO(1)
#define GPIO_SDMMC_CD MOP500_EGPIO(3)
#define GPIO_CAMERA_FLASH_ENABLE MOP500_EGPIO(4)
#define GPIO_MMIO_XENON_CHARGE MOP500_EGPIO(5)
#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
#define GPIO_HAL_SENSOR MOP500_EGPIO(8)
#define GPIO_ACCEL_INT1 MOP500_EGPIO(10)
#define GPIO_ACCEL_INT2 MOP500_EGPIO(11)
#define GPIO_BU21013_CS MOP500_EGPIO(13)
#define MOP500_DISP2_RST_GPIO MOP500_EGPIO(14)
#define MOP500_DISP1_RST_GPIO MOP500_EGPIO(15)
#define GPIO_SDMMC_EN MOP500_EGPIO(17)
#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18)
#define MOP500_EGPIO_END MOP500_EGPIO(24)
/* GPIOs on the AB8500 mixed-signals circuit */
#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x))
/*
* GPIOs on the AB8500 mixed-signals circuit
* Notice that we subtract 1 from the number passed into the macro, this is
* because the AB8500 GPIO pins are enumbered starting from 1, so the value in
* parens matches the GPIO pin number in the data sheet.
*/
#define MOP500_AB8500_GPIO(x) (MOP500_EGPIO_END + (x) - 1)
/*Snowball AB8500 GPIO */
#define SNOWBALL_VSMPS2_1V8_GPIO MOP500_AB8500_PIN_GPIO(1) /* SYSCLKREQ2/GPIO1 */
#define SNOWBALL_PM_GPIO1_GPIO MOP500_AB8500_PIN_GPIO(2) /* SYSCLKREQ3/GPIO2 */
#define SNOWBALL_WLAN_CLK_REQ_GPIO MOP500_AB8500_PIN_GPIO(3) /* SYSCLKREQ4/GPIO3 */
#define SNOWBALL_PM_GPIO4_GPIO MOP500_AB8500_PIN_GPIO(4) /* SYSCLKREQ6/GPIO4 */
#define SNOWBALL_EN_3V6_GPIO MOP500_AB8500_PIN_GPIO(16) /* PWMOUT3/GPIO16 */
#define SNOWBALL_PME_ETH_GPIO MOP500_AB8500_PIN_GPIO(24) /* SYSCLKREQ7/GPIO24 */
#define SNOWBALL_EN_3V3_ETH_GPIO MOP500_AB8500_PIN_GPIO(26) /* GPIO26 */
struct i2c_board_info;
extern void mop500_sdi_init(void);
extern void snowball_sdi_init(void);
extern void hrefv60_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);

207
arch/arm/mach-ux500/clock.c
View File

@ -239,23 +239,6 @@ static void clk_prcmu_disable(struct clk *clk)
writel(1 << clk->prcmu_cg_bit, cg_clr_reg);
}
/* ED doesn't have the combined set/clr registers */
static void clk_prcmu_ed_enable(struct clk *clk)
{
void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ clk->prcmu_cg_mgt;
writel(readl(addr) | PRCM_MGT_ENABLE, addr);
}
static void clk_prcmu_ed_disable(struct clk *clk)
{
void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+ clk->prcmu_cg_mgt;
writel(readl(addr) & ~PRCM_MGT_ENABLE, addr);
}
static struct clkops clk_prcmu_ops = {
.enable = clk_prcmu_enable,
.disable = clk_prcmu_disable,
@ -267,7 +250,6 @@ static unsigned int clkrst_base[] = {
[3] = U8500_CLKRST3_BASE,
[5] = U8500_CLKRST5_BASE,
[6] = U8500_CLKRST6_BASE,
[7] = U8500_CLKRST7_BASE_ED,
};
static void clk_prcc_enable(struct clk *clk)
@ -321,7 +303,6 @@ static DEFINE_PRCMU_CLK(per2clk, 0x0, 12, PER2CLK);
static DEFINE_PRCMU_CLK(per3clk, 0x0, 13, PER3CLK);
static DEFINE_PRCMU_CLK(per5clk, 0x0, 14, PER5CLK);
static DEFINE_PRCMU_CLK_RATE(per6clk, 0x0, 15, PER6CLK, 133330000);
static DEFINE_PRCMU_CLK_RATE(per7clk, 0x0, 16, PER7CLK, 100000000);
static DEFINE_PRCMU_CLK(lcdclk, 0x0, 17, LCDCLK);
static DEFINE_PRCMU_CLK(bmlclk, 0x0, 18, BMLCLK);
static DEFINE_PRCMU_CLK(hsitxclk, 0x0, 19, HSITXCLK);
@ -351,44 +332,28 @@ static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */
static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL);
static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk);
static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL);
static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL);
static DEFINE_PRCC_CLK(1, spi3, 7, -1, NULL);
static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk);
static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk);
static DEFINE_PRCC_CLK(1, msp1, 4, 4, &clk_msp1clk);
static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk);
static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk);
static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk);
static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk);
/* Peripheral Cluster #2 */
static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL);
static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL);
static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL);
static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL);
static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk);
static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL);
static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL);
static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk);
static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL);
static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL);
static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL);
static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL);
static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk);
static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL);
static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL);
static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL);
static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk);
static DEFINE_PRCC_CLK(2, gpio1, 11, -1, NULL);
static DEFINE_PRCC_CLK(2, ssitx, 10, 7, NULL);
static DEFINE_PRCC_CLK(2, ssirx, 9, 6, NULL);
static DEFINE_PRCC_CLK(2, spi0, 8, -1, NULL);
static DEFINE_PRCC_CLK(2, sdi3, 7, 5, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, sdi1, 6, 4, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, msp2, 5, 3, &clk_msp02clk);
static DEFINE_PRCC_CLK(2, sdi4, 4, 2, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(2, pwl, 3, 1, NULL);
static DEFINE_PRCC_CLK(2, spi1, 2, -1, NULL);
static DEFINE_PRCC_CLK(2, spi2, 1, -1, NULL);
static DEFINE_PRCC_CLK(2, i2c3, 0, 0, &clk_i2cclk);
/* Peripheral Cluster #3 */
static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL);
@ -397,49 +362,34 @@ static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk);
static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz);
static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk);
static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk);
static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk);
static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk);
static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk);
static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk);
static DEFINE_PRCC_CLK(3, ssp1, 2, 2, &clk_sspclk);
static DEFINE_PRCC_CLK(3, ssp0, 1, 1, &clk_sspclk);
static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL);
/* Peripheral Cluster #4 is in the always on domain */
/* Peripheral Cluster #5 */
static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL);
static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk);
static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL);
static DEFINE_PRCC_CLK(5, usb, 0, 0, NULL);
/* Peripheral Cluster #6 */
/* MTU ID in data */
static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL);
static DEFINE_PRCC_CLK_CUSTOM(6, mtu1, 8, -1, NULL, clk_mtu_get_rate, 1);
static DEFINE_PRCC_CLK_CUSTOM(6, mtu0, 7, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(6, cfgreg, 6, 6, NULL);
static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL);
static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk);
static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL);
static DEFINE_PRCC_CLK(6, unipro, 4, 1, &clk_uniproclk);
static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL);
static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL);
static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL);
static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk);
static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk);
/* Peripheral Cluster #7 */
static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL);
/* MTU ID in data */
static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL);
static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL);
static DEFINE_PRCC_CLK(6, rng, 0, 0, &clk_rngclk);
static struct clk clk_dummy_apb_pclk = {
.name = "apb_pclk",
};
static struct clk_lookup u8500_common_clks[] = {
static struct clk_lookup u8500_clks[] = {
CLK(dummy_apb_pclk, NULL, "apb_pclk"),
/* Peripheral Cluster #1 */
@ -494,83 +444,41 @@ static struct clk_lookup u8500_common_clks[] = {
CLK(dmaclk, "dma40.0", NULL),
CLK(b2r2clk, "b2r2", NULL),
CLK(tvclk, "tv", NULL),
};
static struct clk_lookup u8500_ed_clks[] = {
/* Peripheral Cluster #1 */
CLK(spi3_ed, "spi3", NULL),
CLK(msp1_ed, "msp1", NULL),
/* Peripheral Cluster #2 */
CLK(gpio1_ed, "gpio.6", NULL),
CLK(gpio1_ed, "gpio.7", NULL),
CLK(ssitx_ed, "ssitx", NULL),
CLK(ssirx_ed, "ssirx", NULL),
CLK(spi0_ed, "spi0", NULL),
CLK(sdi3_ed, "sdi3", NULL),
CLK(sdi1_ed, "sdi1", NULL),
CLK(msp2_ed, "msp2", NULL),
CLK(sdi4_ed, "sdi4", NULL),
CLK(pwl_ed, "pwl", NULL),
CLK(spi1_ed, "spi1", NULL),
CLK(spi2_ed, "spi2", NULL),
CLK(i2c3_ed, "nmk-i2c.3", NULL),
/* Peripheral Cluster #3 */
CLK(ssp1_ed, "ssp1", NULL),
CLK(ssp0_ed, "ssp0", NULL),
/* Peripheral Cluster #5 */
CLK(usb_ed, "musb-ux500.0", "usb"),
/* Peripheral Cluster #6 */
CLK(dmc_ed, "dmc", NULL),
CLK(cryp1_ed, "cryp1", NULL),
CLK(rng_ed, "rng", NULL),
/* Peripheral Cluster #7 */
CLK(tzpc0_ed, "tzpc0", NULL),
CLK(mtu1_ed, "mtu1", NULL),
CLK(mtu0_ed, "mtu0", NULL),
CLK(wdg_ed, "wdg", NULL),
CLK(cfgreg_ed, "cfgreg", NULL),
};
static struct clk_lookup u8500_v1_clks[] = {
/* Peripheral Cluster #1 */
CLK(i2c4, "nmk-i2c.4", NULL),
CLK(spi3_v1, "spi3", NULL),
CLK(msp1_v1, "msp1", NULL),
CLK(spi3, "spi3", NULL),
CLK(msp1, "msp1", NULL),
/* Peripheral Cluster #2 */
CLK(gpio1_v1, "gpio.6", NULL),
CLK(gpio1_v1, "gpio.7", NULL),
CLK(ssitx_v1, "ssitx", NULL),
CLK(ssirx_v1, "ssirx", NULL),
CLK(spi0_v1, "spi0", NULL),
CLK(sdi3_v1, "sdi3", NULL),
CLK(sdi1_v1, "sdi1", NULL),
CLK(msp2_v1, "msp2", NULL),
CLK(sdi4_v1, "sdi4", NULL),
CLK(pwl_v1, "pwl", NULL),
CLK(spi1_v1, "spi1", NULL),
CLK(spi2_v1, "spi2", NULL),
CLK(i2c3_v1, "nmk-i2c.3", NULL),
CLK(gpio1, "gpio.6", NULL),
CLK(gpio1, "gpio.7", NULL),
CLK(ssitx, "ssitx", NULL),
CLK(ssirx, "ssirx", NULL),
CLK(spi0, "spi0", NULL),
CLK(sdi3, "sdi3", NULL),
CLK(sdi1, "sdi1", NULL),
CLK(msp2, "msp2", NULL),
CLK(sdi4, "sdi4", NULL),
CLK(pwl, "pwl", NULL),
CLK(spi1, "spi1", NULL),
CLK(spi2, "spi2", NULL),
CLK(i2c3, "nmk-i2c.3", NULL),
/* Peripheral Cluster #3 */
CLK(ssp1_v1, "ssp1", NULL),
CLK(ssp0_v1, "ssp0", NULL),
CLK(ssp1, "ssp1", NULL),
CLK(ssp0, "ssp0", NULL),
/* Peripheral Cluster #5 */
CLK(usb_v1, "musb-ux500.0", "usb"),
CLK(usb, "musb-ux500.0", "usb"),
/* Peripheral Cluster #6 */
CLK(mtu1_v1, "mtu1", NULL),
CLK(mtu0_v1, "mtu0", NULL),
CLK(cfgreg_v1, "cfgreg", NULL),
CLK(mtu1, "mtu1", NULL),
CLK(mtu0, "mtu0", NULL),
CLK(cfgreg, "cfgreg", NULL),
CLK(hash1, "hash1", NULL),
CLK(unipro_v1, "unipro", NULL),
CLK(rng_v1, "rng", NULL),
CLK(unipro, "unipro", NULL),
CLK(rng, "rng", NULL),
/* PRCMU level clock gating */
@ -743,7 +651,7 @@ err_out:
late_initcall(clk_debugfs_init);
#endif /* defined(CONFIG_DEBUG_FS) */
unsigned long clk_smp_twd_rate = 400000000;
unsigned long clk_smp_twd_rate = 500000000;
unsigned long clk_smp_twd_get_rate(struct clk *clk)
{
@ -769,7 +677,7 @@ static int clk_twd_cpufreq_transition(struct notifier_block *nb,
if (state == CPUFREQ_PRECHANGE) {
/* Save frequency in simple Hz */
clk_smp_twd_rate = f->new * 1000;
clk_smp_twd_rate = (f->new * 1000) / 2;
}
return NOTIFY_OK;
@ -790,11 +698,7 @@ late_initcall(clk_init_smp_twd_cpufreq);
int __init clk_init(void)
{
if (cpu_is_u8500ed()) {
clk_prcmu_ops.enable = clk_prcmu_ed_enable;
clk_prcmu_ops.disable = clk_prcmu_ed_disable;
clk_per6clk.rate = 100000000;
} else if (cpu_is_u5500()) {
if (cpu_is_u5500()) {
/* Clock tree for U5500 not implemented yet */
clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
@ -802,20 +706,11 @@ int __init clk_init(void)
clk_sdmmcclk.rate = 99900000;
}
clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
if (cpu_is_u8500ed())
clkdev_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
else
clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
clkdev_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
clkdev_add(&clk_smp_twd_lookup);
#ifdef CONFIG_DEBUG_FS
clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
if (cpu_is_u8500ed())
clk_debugfs_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
else
clk_debugfs_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
clk_debugfs_add_table(u8500_clks, ARRAY_SIZE(u8500_clks));
#endif
return 0;
}

41
arch/arm/mach-ux500/cpu-db5500.c
View File

@ -46,26 +46,6 @@ static struct map_desc u5500_io_desc[] __initdata = {
__IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K),
};
static struct resource db5500_pmu_resources[] = {
[0] = {
.start = IRQ_DB5500_PMU0,
.end = IRQ_DB5500_PMU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_DB5500_PMU1,
.end = IRQ_DB5500_PMU1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device db5500_pmu_device = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.num_resources = ARRAY_SIZE(db5500_pmu_resources),
.resource = db5500_pmu_resources,
};
static struct resource mbox0_resources[] = {
{
.name = "mbox_peer",
@ -151,7 +131,6 @@ static struct platform_device mbox2_device = {
};
static struct platform_device *db5500_platform_devs[] __initdata = {
&db5500_pmu_device,
&mbox0_device,
&mbox1_device,
&mbox2_device,
@ -192,6 +171,25 @@ void __init u5500_map_io(void)
_PRCMU_BASE = __io_address(U5500_PRCMU_BASE);
}
static void __init db5500_pmu_init(void)
{
struct resource res[] = {
[0] = {
.start = IRQ_DB5500_PMU0,
.end = IRQ_DB5500_PMU0,
.flags = IORESOURCE_IRQ,
},
[1] = {
.start = IRQ_DB5500_PMU1,
.end = IRQ_DB5500_PMU1,
.flags = IORESOURCE_IRQ,
},
};
platform_device_register_simple("arm-pmu", ARM_PMU_DEVICE_CPU,
res, ARRAY_SIZE(res));
}
static int usb_db5500_rx_dma_cfg[] = {
DB5500_DMA_DEV4_USB_OTG_IEP_1_9,
DB5500_DMA_DEV5_USB_OTG_IEP_2_10,
@ -217,6 +215,7 @@ static int usb_db5500_tx_dma_cfg[] = {
void __init u5500_init_devices(void)
{
db5500_add_gpios();
db5500_pmu_init();
db5500_dma_init();
db5500_add_rtc();
db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);

30
arch/arm/mach-ux500/cpu-db8500.c
View File

@ -1,5 +1,5 @@
/*
* Copyright (C) 2008-2009 ST-Ericsson
* Copyright (C) 2008-2009 ST-Ericsson SA
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
@ -53,19 +53,6 @@ static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
};
static struct map_desc u8500_ed_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
};
static struct map_desc u8500_v1_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K),
};
static struct map_desc u8500_v2_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
};
@ -80,13 +67,6 @@ void __init u8500_map_io(void)
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
if (cpu_is_u8500ed())
iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc));
else if (cpu_is_u8500v1())
iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
else if (cpu_is_u8500v2())
iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
}
@ -155,12 +135,9 @@ static resource_size_t __initdata db8500_gpio_base[] = {
static void __init db8500_add_gpios(void)
{
struct nmk_gpio_platform_data pdata = {
/* No custom data yet */
.supports_sleepmode = true,
};
if (cpu_is_u8500v2())
pdata.supports_sleepmode = true;
dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
@ -192,9 +169,6 @@ static int usb_db8500_tx_dma_cfg[] = {
*/
void __init u8500_init_devices(void)
{
if (cpu_is_u8500ed())
dma40_u8500ed_fixup();
db8500_add_rtc();
db8500_add_gpios();
db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);

10
arch/arm/mach-ux500/devices-db8500.c
View File

@ -166,16 +166,6 @@ struct platform_device u8500_dma40_device = {
.resource = dma40_resources
};
void dma40_u8500ed_fixup(void)
{
dma40_plat_data.memcpy = NULL;
dma40_plat_data.memcpy_len = 0;
dma40_resources[0].start = U8500_DMA_BASE_ED;
dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1;
dma40_resources[1].start = U8500_DMA_LCPA_BASE_ED;
dma40_resources[1].end = U8500_DMA_LCPA_BASE_ED + 2 * SZ_1K - 1;
}
struct resource keypad_resources[] = {
[0] = {
.start = U8500_SKE_BASE,

6
arch/arm/mach-ux500/id.c
View File

@ -65,6 +65,7 @@ static unsigned int partnumber(unsigned int asicid)
* DB8500v1 0x411fc091 0x9001FFF4 0x008500A0
* DB8500v1.1 0x411fc091 0x9001FFF4 0x008500A1
* DB8500v2 0x412fc091 0x9001DBF4 0x008500B0
* DB8520v2.2 0x412fc091 0x9001DBF4 0x008500B2
* DB5500v1 0x412fc091 0x9001FFF4 0x005500A0
*/
@ -80,9 +81,10 @@ void __init ux500_map_io(void)
addr = 0x9001FFF4;
break;
case 0x412fc091: /* DB8500v2 / DB5500v1 */
case 0x412fc091: /* DB8520 / DB8500v2 / DB5500v1 */
asicid = ux500_read_asicid(0x9001DBF4);
if (partnumber(asicid) == 0x8500)
if (partnumber(asicid) == 0x8500 ||
partnumber(asicid) == 0x8520)
/* DB8500v2 */
break;

4
arch/arm/mach-ux500/include/mach/db5500-regs.h
View File

@ -65,8 +65,11 @@
#define U5500_PRCMU_TIMER_4_BASE (U5500_PER4_BASE + 0x07450)
#define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000)
#define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000)
#define U5500_MTIMER_BASE (U5500_PER4_BASE + 0xC000)
#define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000)
#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000)
#define U5500_PRCMU_TCPM_BASE (U5500_PER4_BASE + 0x10000)
#define U5500_TPIU_BASE (U5500_PER4_BASE + 0x50000)
#define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000)
#define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000)
@ -125,6 +128,7 @@
#define U5500_ACCCON_BASE (0xBFFF1000)
#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)
#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)
#define U5500_INTCON_MBOX1_INT_RESET_ADDR (0xBFFD31A4)
#define U5500_ESRAM_BASE 0x40000000
#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000

20
arch/arm/mach-ux500/include/mach/db8500-regs.h
View File

@ -22,7 +22,9 @@
#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000
#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET)
#define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000)
/* This address fulfills the 256k alignment requirement of the lcla base */
#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4
#define U8500_PER3_BASE 0x80000000
#define U8500_STM_BASE 0x80100000
@ -40,15 +42,14 @@
#define U8500_ASIC_ID_BASE 0x9001D000
#define U8500_PER6_BASE 0xa03c0000
#define U8500_PER7_BASE 0xa03d0000
#define U8500_PER5_BASE 0xa03e0000
#define U8500_PER7_BASE_ED 0xa03d0000
#define U8500_SVA_BASE 0xa0100000
#define U8500_SIA_BASE 0xa0200000
#define U8500_SGA_BASE 0xa0300000
#define U8500_MCDE_BASE 0xa0350000
#define U8500_DMA_BASE_ED 0xa0362000
#define U8500_DMA_BASE 0x801C0000 /* v1 */
#define U8500_SBAG_BASE 0xa0390000
@ -66,13 +67,6 @@
#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000)
#define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000)
/* per7 base addresses */
#define U8500_CR_BASE_ED (U8500_PER7_BASE_ED + 0x8000)
#define U8500_MTU0_BASE_ED (U8500_PER7_BASE_ED + 0xa000)
#define U8500_MTU1_BASE_ED (U8500_PER7_BASE_ED + 0xb000)
#define U8500_TZPC0_BASE_ED (U8500_PER7_BASE_ED + 0xc000)
#define U8500_CLKRST7_BASE_ED (U8500_PER7_BASE_ED + 0xf000)
#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
@ -102,12 +96,10 @@
#define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000)
#define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000)
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000)
#define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338)
#define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450)
/* per3 base addresses */
#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)

2
arch/arm/mach-ux500/include/mach/devices.h
View File

@ -18,6 +18,4 @@ extern struct amba_device ux500_pl031_device;
extern struct platform_device u8500_dma40_device;
extern struct platform_device ux500_ske_keypad_device;
void dma40_u8500ed_fixup(void);
#endif

10
arch/arm/mach-ux500/include/mach/hardware.h
View File

@ -10,20 +10,21 @@
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
/* macros to get at IO space when running virtually
/*
* Macros to get at IO space when running virtually
* We dont map all the peripherals, let ioremap do
* this for us. We map only very basic peripherals here.
*/
#define U8500_IO_VIRTUAL 0xf0000000
#define U8500_IO_PHYSICAL 0xa0000000
/* this macro is used in assembly, so no cast */
/* This macro is used in assembly, so no cast */
#define IO_ADDRESS(x) \
(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
/* typesafe io address */
#define __io_address(n) __io(IO_ADDRESS(n))
/* used by some plat-nomadik code */
/* Used by some plat-nomadik code */
#define io_p2v(n) __io_address(n)
#include <mach/db8500-regs.h>
@ -36,6 +37,5 @@ extern void __iomem *_PRCMU_BASE;
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif
#endif /* __ASSEMBLY__ */
#endif /* __MACH_HARDWARE_H */

24
arch/arm/mach-ux500/include/mach/id.h
View File

@ -46,6 +46,30 @@ static inline bool __attribute_const__ cpu_is_u5500(void)
return dbx500_partnumber() == 0x5500;
}
/*
* 5500 revisions
*/
static inline bool __attribute_const__ cpu_is_u5500v1(void)
{
return cpu_is_u5500() && (dbx500_revision() & 0xf0) == 0xA0;
}
static inline bool __attribute_const__ cpu_is_u5500v2(void)
{
return (dbx500_id.revision & 0xf0) == 0xB0;
}
static inline bool __attribute_const__ cpu_is_u5500v20(void)
{
return cpu_is_u5500() && ((dbx500_revision() & 0xf0) == 0xB0);
}
static inline bool __attribute_const__ cpu_is_u5500v21(void)
{
return cpu_is_u5500() && (dbx500_revision() == 0xB1);
}
/*
* 8500 revisions
*/

1
arch/arm/plat-omap/include/plat/clkdev_omap.h
View File

@ -40,6 +40,7 @@ struct omap_clk {
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
#define CK_446X (1 << 13)
#define CK_1710 (1 << 15) /* 1710 extra for rate selection */
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)

2
arch/arm/plat-omap/include/plat/irqs.h
View File

@ -357,7 +357,7 @@
#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
#define INT_35XX_USBOTG_IRQ 71
#define INT_35XX_UART4 84
#define INT_35XX_UART4_IRQ 84
#define INT_35XX_CCDC_VD0_IRQ 88
#define INT_35XX_CCDC_VD1_IRQ 92
#define INT_35XX_CCDC_VD2_IRQ 93

1
arch/arm/plat-omap/include/plat/serial.h
View File

@ -44,6 +44,7 @@
#define OMAP3_UART2_BASE OMAP2_UART2_BASE
#define OMAP3_UART3_BASE 0x49020000
#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
/* OMAP4 serial ports */
#define OMAP4_UART1_BASE OMAP2_UART1_BASE

9
arch/arm/plat-omap/sram.c
View File

@ -141,11 +141,9 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1621() ||
cpu_is_omap1710())
else if (cpu_is_omap1610() || cpu_is_omap1611() ||
cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
omap_sram_size = SZ_256K;
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
@ -224,6 +222,9 @@ static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
BUG_ON(!_omap_sram_reprogram_clock);
/* On 730, bit 13 must always be 1 */
if (cpu_is_omap7xx())
ckctl |= 0x2000;
_omap_sram_reprogram_clock(dpllctl, ckctl);
}

2
arch/arm/plat-orion/Makefile
View File

@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
obj-y := irq.o pcie.o time.o common.o mpp.o
obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o
obj-m :=
obj-n :=
obj- :=

174
arch/arm/plat-orion/addr-map.c Normal file
View File

@ -0,0 +1,174 @@
/*
* arch/arm/plat-orion/addr-map.c
*
* Address map functions for Marvell Orion based SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
#include <plat/addr-map.h>
struct mbus_dram_target_info orion_mbus_dram_info;
const struct mbus_dram_target_info *mv_mbus_dram_info(void)
{
return &orion_mbus_dram_info;
}
EXPORT_SYMBOL_GPL(mv_mbus_dram_info);
/*
* DDR target is the same on all Orion platforms.
*/
#define TARGET_DDR 0
/*
* Helpers to get DDR bank info
*/
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
#define WIN_CTRL_OFF 0x0000
#define WIN_BASE_OFF 0x0004
#define WIN_REMAP_LO_OFF 0x0008
#define WIN_REMAP_HI_OFF 0x000c
/*
* Default implementation
*/
static void __init __iomem *
orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
{
return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
}
/*
* Default implementation
*/
static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
const int win)
{
if (win < cfg->remappable_wins)
return 1;
return 0;
}
void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
const int win, const u32 base,
const u32 size, const u8 target,
const u8 attr, const int remap)
{
void __iomem *addr = cfg->win_cfg_base(cfg, win);
u32 ctrl, base_high, remap_addr;
if (win >= cfg->num_wins) {
printk(KERN_ERR "setup_cpu_win: trying to allocate window "
"%d when only %d allowed\n", win, cfg->num_wins);
}
base_high = base & 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base_high, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
if (cfg->cpu_win_can_remap(cfg, win)) {
if (remap < 0)
remap_addr = base;
else
remap_addr = remap;
writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
/*
* Configure a number of windows.
*/
static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
const struct orion_addr_map_info *info)
{
while (info->win != -1) {
orion_setup_cpu_win(cfg, info->win, info->base, info->size,
info->target, info->attr, info->remap);
info++;
}
}
static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
{
void __iomem *addr;
int i;
for (i = 0; i < cfg->num_wins; i++) {
addr = cfg->win_cfg_base(cfg, i);
writel(0, addr + WIN_BASE_OFF);
writel(0, addr + WIN_CTRL_OFF);
if (cfg->cpu_win_can_remap(cfg, i)) {
writel(0, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
}
/*
* Disable, clear and configure windows.
*/
void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
const struct orion_addr_map_info *info)
{
if (!cfg->cpu_win_can_remap)
cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
if (!cfg->win_cfg_base)
cfg->win_cfg_base = orion_win_cfg_base;
orion_disable_wins(cfg);
if (info)
orion_setup_cpu_wins(cfg, info);
}
/*
* Setup MBUS dram target info.
*/
void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
const u32 ddr_window_cpu_base)
{
void __iomem *addr;
int i;
int cs;
orion_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
addr = (void __iomem *)ddr_window_cpu_base;
for (i = 0, cs = 0; i < 4; i++) {
u32 base = readl(addr + DDR_BASE_CS_OFF(i));
u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
*/
if (size & 1) {
struct mbus_dram_window *w;
w = &orion_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
w->base = base & 0xffff0000;
w->size = (size | 0x0000ffff) + 1;
}
}
orion_mbus_dram_info.num_cs = cs;
}

43
arch/arm/plat-orion/common.c
View File

@ -13,7 +13,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
@ -203,13 +202,12 @@ void __init orion_rtc_init(unsigned long mapbase,
****************************************************************************/
static __init void ge_complete(
struct mv643xx_eth_shared_platform_data *orion_ge_shared_data,
struct mbus_dram_target_info *mbus_dram_info, int tclk,
int tclk,
struct resource *orion_ge_resource, unsigned long irq,
struct platform_device *orion_ge_shared,
struct mv643xx_eth_platform_data *eth_data,
struct platform_device *orion_ge)
{
orion_ge_shared_data->dram = mbus_dram_info;
orion_ge_shared_data->t_clk = tclk;
orion_ge_resource->start = irq;
orion_ge_resource->end = irq;
@ -259,7 +257,6 @@ static struct platform_device orion_ge00 = {
};
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@ -267,7 +264,7 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
ge_complete(&orion_ge00_shared_data, mbus_dram_info, tclk,
ge_complete(&orion_ge00_shared_data, tclk,
orion_ge00_resources, irq, &orion_ge00_shared,
eth_data, &orion_ge00);
}
@ -313,7 +310,6 @@ static struct platform_device orion_ge01 = {
};
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@ -321,7 +317,7 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
ge_complete(&orion_ge01_shared_data, mbus_dram_info, tclk,
ge_complete(&orion_ge01_shared_data, tclk,
orion_ge01_resources, irq, &orion_ge01_shared,
eth_data, &orion_ge01);
}
@ -367,7 +363,6 @@ static struct platform_device orion_ge10 = {
};
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@ -375,7 +370,7 @@ void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
ge_complete(&orion_ge10_shared_data, mbus_dram_info, tclk,
ge_complete(&orion_ge10_shared_data, tclk,
orion_ge10_resources, irq, &orion_ge10_shared,
eth_data, &orion_ge10);
}
@ -421,7 +416,6 @@ static struct platform_device orion_ge11 = {
};
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@ -429,7 +423,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
{
fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
mapbase + 0x2000, SZ_16K - 1, irq_err);
ge_complete(&orion_ge11_shared_data, mbus_dram_info, tclk,
ge_complete(&orion_ge11_shared_data, tclk,
orion_ge11_resources, irq, &orion_ge11_shared,
eth_data, &orion_ge11);
}
@ -592,8 +586,6 @@ void __init orion_wdt_init(unsigned long tclk)
/*****************************************************************************
* XOR
****************************************************************************/
static struct mv_xor_platform_shared_data orion_xor_shared_data;
static u64 orion_xor_dmamask = DMA_BIT_MASK(32);
void __init orion_xor_init_channels(
@ -632,9 +624,6 @@ static struct resource orion_xor0_shared_resources[] = {
static struct platform_device orion_xor0_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &orion_xor_shared_data,
},
.num_resources = ARRAY_SIZE(orion_xor0_shared_resources),
.resource = orion_xor0_shared_resources,
};
@ -687,14 +676,11 @@ static struct platform_device orion_xor01_channel = {
},
};
void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase_low,
void __init orion_xor0_init(unsigned long mapbase_low,
unsigned long mapbase_high,
unsigned long irq_0,
unsigned long irq_1)
{
orion_xor_shared_data.dram = mbus_dram_info;
orion_xor0_shared_resources[0].start = mapbase_low;
orion_xor0_shared_resources[0].end = mapbase_low + 0xff;
orion_xor0_shared_resources[1].start = mapbase_high;
@ -727,9 +713,6 @@ static struct resource orion_xor1_shared_resources[] = {
static struct platform_device orion_xor1_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 1,
.dev = {
.platform_data = &orion_xor_shared_data,
},
.num_resources = ARRAY_SIZE(orion_xor1_shared_resources),
.resource = orion_xor1_shared_resources,
};
@ -828,11 +811,9 @@ static struct platform_device orion_ehci = {
},
};
void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
void __init orion_ehci_init(unsigned long mapbase,
unsigned long irq)
{
orion_ehci_data.dram = mbus_dram_info;
fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
@ -854,11 +835,9 @@ static struct platform_device orion_ehci_1 = {
},
};
void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq)
{
orion_ehci_data.dram = mbus_dram_info;
fill_resources(&orion_ehci_1, orion_ehci_1_resources,
mapbase, SZ_4K - 1, irq);
@ -880,11 +859,9 @@ static struct platform_device orion_ehci_2 = {
},
};
void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
void __init orion_ehci_2_init(unsigned long mapbase,
unsigned long irq)
{
orion_ehci_data.dram = mbus_dram_info;
fill_resources(&orion_ehci_2, orion_ehci_2_resources,
mapbase, SZ_4K - 1, irq);
@ -911,11 +888,9 @@ static struct platform_device orion_sata = {
};
void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq)
{
sata_data->dram = mbus_dram_info;
orion_sata.dev.platform_data = sata_data;
fill_resources(&orion_sata, orion_sata_resources,
mapbase, 0x5000 - 1, irq);

53
arch/arm/plat-orion/include/plat/addr-map.h Normal file
View File

@ -0,0 +1,53 @@
/*
* arch/arm/plat-orion/include/plat/addr-map.h
*
* Marvell Orion SoC address map handling.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __PLAT_ADDR_MAP_H
#define __PLAT_ADDR_MAP_H
extern struct mbus_dram_target_info orion_mbus_dram_info;
struct orion_addr_map_cfg {
const int num_wins; /* Total number of windows */
const int remappable_wins;
const u32 bridge_virt_base;
/* If NULL, the default cpu_win_can_remap will be used, using
the value in remappable_wins */
int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg,
const int win);
/* If NULL, the default win_cfg_base will be used, using the
value in bridge_virt_base */
void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg,
const int win);
};
/*
* Information needed to setup one address mapping.
*/
struct orion_addr_map_info {
const int win;
const u32 base;
const u32 size;
const u8 target;
const u8 attr;
const int remap;
};
void __init orion_config_wins(struct orion_addr_map_cfg *cfg,
const struct orion_addr_map_info *info);
void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
const int win, const u32 base,
const u32 size, const u8 target,
const u8 attr, const int remap);
void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
const u32 ddr_window_cpu_base);
#endif

3
arch/arm/plat-orion/include/plat/audio.h
View File

@ -1,11 +1,8 @@
#ifndef __PLAT_AUDIO_H
#define __PLAT_AUDIO_H
#include <linux/mbus.h>
struct kirkwood_asoc_platform_data {
u32 tclk;
struct mbus_dram_target_info *dram;
int burst;
};
#endif

17
arch/arm/plat-orion/include/plat/common.h
View File

@ -37,28 +37,24 @@ void __init orion_rtc_init(unsigned long mapbase,
unsigned long irq);
void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
int tclk);
void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
int tclk);
void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
int tclk);
void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq,
unsigned long irq_err,
@ -82,8 +78,7 @@ void __init orion_spi_1_init(unsigned long mapbase,
void __init orion_wdt_init(unsigned long tclk);
void __init orion_xor0_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase_low,
void __init orion_xor0_init(unsigned long mapbase_low,
unsigned long mapbase_high,
unsigned long irq_0,
unsigned long irq_1);
@ -93,20 +88,16 @@ void __init orion_xor1_init(unsigned long mapbase_low,
unsigned long irq_0,
unsigned long irq_1);
void __init orion_ehci_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
void __init orion_ehci_init(unsigned long mapbase,
unsigned long irq);
void __init orion_ehci_1_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq);
void __init orion_ehci_2_init(struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
void __init orion_ehci_2_init(unsigned long mapbase,
unsigned long irq);
void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
struct mbus_dram_target_info *mbus_dram_info,
unsigned long mapbase,
unsigned long irq);

1
arch/arm/plat-orion/include/plat/ehci-orion.h
View File

@ -19,7 +19,6 @@ enum orion_ehci_phy_ver {
};
struct orion_ehci_data {
struct mbus_dram_target_info *dram;
enum orion_ehci_phy_ver phy_version;
};

6
arch/arm/plat-orion/include/plat/mv_xor.h
View File

@ -13,12 +13,6 @@
#define MV_XOR_SHARED_NAME "mv_xor_shared"
#define MV_XOR_NAME "mv_xor"
struct mbus_dram_target_info;
struct mv_xor_platform_shared_data {
struct mbus_dram_target_info *dram;
};
struct mv_xor_platform_data {
struct platform_device *shared;
int hw_id;

1
arch/arm/plat-orion/include/plat/mvsdio.h
View File

@ -12,7 +12,6 @@
#include <linux/mbus.h>
struct mvsdio_platform_data {
struct mbus_dram_target_info *dram;
unsigned int clock;
int gpio_card_detect;
int gpio_write_protect;

3
arch/arm/plat-orion/include/plat/pcie.h
View File

@ -20,8 +20,7 @@ int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
void orion_pcie_reset(void __iomem *base);
void orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram);
void orion_pcie_setup(void __iomem *base);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
u32 devfn, int where, int size, u32 *val);
int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,

6
arch/arm/plat-orion/pcie.c
View File

@ -13,6 +13,7 @@
#include <linux/mbus.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <plat/addr-map.h>
#include <linux/delay.h>
/*
@ -175,8 +176,7 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1));
}
void __init orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram)
void __init orion_pcie_setup(void __iomem *base)
{
u16 cmd;
u32 mask;
@ -184,7 +184,7 @@ void __init orion_pcie_setup(void __iomem *base,
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/
orion_pcie_setup_wins(base, dram);
orion_pcie_setup_wins(base, &orion_mbus_dram_info);
/*
* Master + slave enable.

19
drivers/ata/sata_mv.c
View File

@ -3988,7 +3988,7 @@ static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
}
static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
struct mbus_dram_target_info *dram)
const struct mbus_dram_target_info *dram)
{
int i;
@ -3998,7 +3998,7 @@ static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
}
for (i = 0; i < dram->num_cs; i++) {
struct mbus_dram_window *cs = dram->cs + i;
const struct mbus_dram_window *cs = dram->cs + i;
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
@ -4019,6 +4019,7 @@ static void mv_conf_mbus_windows(struct mv_host_priv *hpriv,
static int mv_platform_probe(struct platform_device *pdev)
{
const struct mv_sata_platform_data *mv_platform_data;
const struct mbus_dram_target_info *dram;
const struct ata_port_info *ppi[] =
{ &mv_port_info[chip_soc], NULL };
struct ata_host *host;
@ -4072,8 +4073,9 @@ static int mv_platform_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
if (mv_platform_data->dram != NULL)
mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
dram = mv_mbus_dram_info();
if (dram)
mv_conf_mbus_windows(hpriv, dram);
rc = mv_create_dma_pools(hpriv, &pdev->dev);
if (rc)
@ -4141,17 +4143,18 @@ static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
static int mv_platform_resume(struct platform_device *pdev)
{
struct ata_host *host = platform_get_drvdata(pdev);
const struct mbus_dram_target_info *dram;
int ret;
if (host) {
struct mv_host_priv *hpriv = host->private_data;
const struct mv_sata_platform_data *mv_platform_data = \
pdev->dev.platform_data;
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
if (mv_platform_data->dram != NULL)
mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
dram = mv_mbus_dram_info();
if (dram)
mv_conf_mbus_windows(hpriv, dram);
/* initialize adapter */
ret = mv_init_host(host);

11
drivers/dma/mv_xor.c
View File

@ -1250,7 +1250,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
static void
mv_xor_conf_mbus_windows(struct mv_xor_shared_private *msp,
struct mbus_dram_target_info *dram)
const struct mbus_dram_target_info *dram)
{
void __iomem *base = msp->xor_base;
u32 win_enable = 0;
@ -1264,7 +1264,7 @@ mv_xor_conf_mbus_windows(struct mv_xor_shared_private *msp,
}
for (i = 0; i < dram->num_cs; i++) {
struct mbus_dram_window *cs = dram->cs + i;
const struct mbus_dram_window *cs = dram->cs + i;
writel((cs->base & 0xffff0000) |
(cs->mbus_attr << 8) |
@ -1290,7 +1290,7 @@ static struct platform_driver mv_xor_driver = {
static int mv_xor_shared_probe(struct platform_device *pdev)
{
struct mv_xor_platform_shared_data *msd = pdev->dev.platform_data;
const struct mbus_dram_target_info *dram;
struct mv_xor_shared_private *msp;
struct resource *res;
@ -1323,8 +1323,9 @@ static int mv_xor_shared_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
if (msd != NULL && msd->dram != NULL)
mv_xor_conf_mbus_windows(msp, msd->dram);
dram = mv_mbus_dram_info();
if (dram)
mv_xor_conf_mbus_windows(msp, dram);
return 0;
}

7
drivers/mfd/db8500-prcmu.c
View File

@ -2102,14 +2102,11 @@ static struct irq_chip prcmu_irq_chip = {
void __init db8500_prcmu_early_init(void)
{
unsigned int i;
if (cpu_is_u8500v1()) {
tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
} else if (cpu_is_u8500v2()) {
if (cpu_is_u8500v2()) {
void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
if (tcpm_base != NULL) {
int version;
u32 version;
version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
prcmu_version.project_number = version & 0xFF;
prcmu_version.api_version = (version >> 8) & 0xFF;

13
drivers/mmc/host/mvsdio.c
View File

@ -679,8 +679,9 @@ static const struct mmc_host_ops mvsd_ops = {
.enable_sdio_irq = mvsd_enable_sdio_irq,
};
static void __init mv_conf_mbus_windows(struct mvsd_host *host,
struct mbus_dram_target_info *dram)
static void __init
mv_conf_mbus_windows(struct mvsd_host *host,
const struct mbus_dram_target_info *dram)
{
void __iomem *iobase = host->base;
int i;
@ -691,7 +692,7 @@ static void __init mv_conf_mbus_windows(struct mvsd_host *host,
}
for (i = 0; i < dram->num_cs; i++) {
struct mbus_dram_window *cs = dram->cs + i;
const struct mbus_dram_window *cs = dram->cs + i;
writel(((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
@ -705,6 +706,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
struct mmc_host *mmc = NULL;
struct mvsd_host *host = NULL;
const struct mvsdio_platform_data *mvsd_data;
const struct mbus_dram_target_info *dram;
struct resource *r;
int ret, irq;
@ -755,8 +757,9 @@ static int __init mvsd_probe(struct platform_device *pdev)
}
/* (Re-)program MBUS remapping windows if we are asked to. */
if (mvsd_data->dram != NULL)
mv_conf_mbus_windows(host, mvsd_data->dram);
dram = mv_mbus_dram_info();
if (dram)
mv_conf_mbus_windows(host, dram);
mvsd_power_down(host);

10
drivers/net/ethernet/marvell/mv643xx_eth.c
View File

@ -2511,7 +2511,7 @@ static void mv643xx_eth_netpoll(struct net_device *dev)
/* platform glue ************************************************************/
static void
mv643xx_eth_conf_mbus_windows(struct mv643xx_eth_shared_private *msp,
struct mbus_dram_target_info *dram)
const struct mbus_dram_target_info *dram)
{
void __iomem *base = msp->base;
u32 win_enable;
@ -2529,7 +2529,7 @@ mv643xx_eth_conf_mbus_windows(struct mv643xx_eth_shared_private *msp,
win_protect = 0;
for (i = 0; i < dram->num_cs; i++) {
struct mbus_dram_window *cs = dram->cs + i;
const struct mbus_dram_window *cs = dram->cs + i;
writel((cs->base & 0xffff0000) |
(cs->mbus_attr << 8) |
@ -2579,6 +2579,7 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
static int mv643xx_eth_version_printed;
struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
struct mv643xx_eth_shared_private *msp;
const struct mbus_dram_target_info *dram;
struct resource *res;
int ret;
@ -2643,8 +2644,9 @@ static int mv643xx_eth_shared_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
if (pd != NULL && pd->dram != NULL)
mv643xx_eth_conf_mbus_windows(msp, pd->dram);
dram = mv_mbus_dram_info();
if (dram)
mv643xx_eth_conf_mbus_windows(msp, dram);
/*
* Detect hardware parameters.

10
drivers/usb/host/ehci-orion.c
View File

@ -172,7 +172,7 @@ static const struct hc_driver ehci_orion_hc_driver = {
static void __init
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
struct mbus_dram_target_info *dram)
const struct mbus_dram_target_info *dram)
{
int i;
@ -182,7 +182,7 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
for (i = 0; i < dram->num_cs; i++) {
struct mbus_dram_window *cs = dram->cs + i;
const struct mbus_dram_window *cs = dram->cs + i;
wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
(cs->mbus_attr << 8) |
@ -194,6 +194,7 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
const struct mbus_dram_target_info *dram;
struct resource *res;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
@ -259,8 +260,9 @@ static int __devinit ehci_orion_drv_probe(struct platform_device *pdev)
/*
* (Re-)program MBUS remapping windows if we are asked to.
*/
if (pd != NULL && pd->dram != NULL)
ehci_orion_conf_mbus_windows(hcd, pd->dram);
dram = mv_mbus_dram_info();
if (dram)
ehci_orion_conf_mbus_windows(hcd, dram);
/*
* setup Orion USB controller.

3
include/linux/ata_platform.h
View File

@ -27,10 +27,7 @@ extern int __devexit __pata_platform_remove(struct device *dev);
/*
* Marvell SATA private data
*/
struct mbus_dram_target_info;
struct mv_sata_platform_data {
struct mbus_dram_target_info *dram;
int n_ports; /* number of sata ports */
};

13
include/linux/mbus.h
View File

@ -32,5 +32,16 @@ struct mbus_dram_target_info
} cs[4];
};
/*
* The Marvell mbus is to be found only on SOCs from the Orion family
* at the moment. Provide a dummy stub for other architectures.
*/
#ifdef CONFIG_PLAT_ORION
extern const struct mbus_dram_target_info *mv_mbus_dram_info(void);
#else
static inline const struct mbus_dram_target_info *mv_mbus_dram_info(void)
{
return NULL;
}
#endif
#endif

15
sound/soc/kirkwood/kirkwood-dma.c
View File

@ -94,9 +94,10 @@ static irqreturn_t kirkwood_dma_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
static void kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
unsigned long dma,
struct mbus_dram_target_info *dram)
static void
kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
unsigned long dma,
const struct mbus_dram_target_info *dram)
{
int i;
@ -106,7 +107,7 @@ static void kirkwood_dma_conf_mbus_windows(void __iomem *base, int win,
/* try to find matching cs for current dma address */
for (i = 0; i < dram->num_cs; i++) {
struct mbus_dram_window *cs = dram->cs + i;
const struct mbus_dram_window *cs = dram->cs + i;
if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
writel(cs->base & 0xffff0000,
base + KIRKWOOD_AUDIO_WIN_BASE_REG(win));
@ -127,6 +128,7 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai;
struct kirkwood_dma_data *priv;
struct kirkwood_dma_priv *prdata = snd_soc_platform_get_drvdata(platform);
const struct mbus_dram_target_info *dram;
unsigned long addr;
priv = snd_soc_dai_get_dma_data(cpu_dai, substream);
@ -175,15 +177,16 @@ static int kirkwood_dma_open(struct snd_pcm_substream *substream)
writel((unsigned long)-1, priv->io + KIRKWOOD_ERR_MASK);
}
dram = mv_mbus_dram_info();
addr = virt_to_phys(substream->dma_buffer.area);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
prdata->play_stream = substream;
kirkwood_dma_conf_mbus_windows(priv->io,
KIRKWOOD_PLAYBACK_WIN, addr, priv->dram);
KIRKWOOD_PLAYBACK_WIN, addr, dram);
} else {
prdata->rec_stream = substream;
kirkwood_dma_conf_mbus_windows(priv->io,
KIRKWOOD_RECORD_WIN, addr, priv->dram);
KIRKWOOD_RECORD_WIN, addr, dram);
}
return 0;