hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc 

The conventions is to put SoC devices under 'soc' node. In fact other
our DTSes (like exynos3250.dtsi or exynos5410.dtsi) already follow it.
Adjust exynos5250 and exynos5420 DTSI to follow this convention. This is
also necessary for the upcoming change in exynos5410.dtsi to inherit
from common exynos5.dtsi.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
This commit is contained in:
Krzysztof Kozlowski 2016-05-03 18:53:04 +02:00 committed by Krzysztof Kozlowski
parent e3daf8e54c
commit 5d99cc59a3
3 changed files with 2387 additions and 2374 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
arch/arm/boot/dts/exynos5.dtsi
View File

@ -30,6 +30,12 @@
serial3 = &serial_3;
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
chipid@10000000 {
compatible = "samsung,exynos4210-chipid";
reg = <0x10000000 0x100>;
@ -169,4 +175,5 @@
#size-cells = <0>;
status = "disabled";
};
};
};

47
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -92,6 +92,7 @@
};
};
soc: soc {
sysram@02020000 {
compatible = "mmio-sram";
reg = <0x02020000 0x30000>;
@ -153,9 +154,10 @@
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
/* Unfortunately we need this since some versions of U-Boot
* on Exynos don't set the CNTFRQ register, so we need the
* value from DT.
/*
* Unfortunately we need this since some versions
* of U-Boot on Exynos don't set the CNTFRQ register,
* so we need the value from DT.
*/
clock-frequency = <24000000>;
};
@ -278,25 +280,6 @@
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
@ -980,6 +963,26 @@
clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
#iommu-cells = <0>;
};
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&tmu 0>;
cooling-maps {
map0 {
/* Corresponds to 800MHz at freq_table */
cooling-device = <&cpu0 9 9>;
};
map1 {
/* Corresponds to 200MHz at freq_table */
cooling-device = <&cpu0 15 15>;
};
};
};
};
};
&dp {

65
arch/arm/boot/dts/exynos5420.dtsi
View File

@ -46,6 +46,12 @@
usbdrdphy1 = &usbdrd_phy1;
};
/*
* The 'cpus' node is not present here but instead it is provided
* by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
*/
soc: soc {
cluster_a15_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
@ -156,11 +162,6 @@
};
};
/*
* The 'cpus' node is not present here but instead it is provided
* by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
*/
cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
@ -466,9 +467,10 @@
#dma-requests = <1>;
/*
* MDMA1 can support both secure and non-secure
* AXI transactions. When this is enabled in the kernel
* for boards that run in secure mode, we are getting
* imprecise external aborts causing the kernel to oops.
* AXI transactions. When this is enabled in
* the kernel for boards that run in secure
* mode, we are getting imprecise external
* aborts causing the kernel to oops.
*/
status = "disabled";
};
@ -836,29 +838,6 @@
#include "exynos4412-tmu-sensor-conf.dtsi"
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
watchdog: watchdog@101D0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101D0000 0x100>;
@ -1522,6 +1501,30 @@
opp-hz = /bits/ 64 <400000000>;
};
};
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
};
&dp {