drm/msm/dsi: Split PHY drivers to separate files

This change moves each PHY type specific code into
separate files.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
This commit is contained in:
Hai Li 2015-08-13 17:45:52 -04:00 committed by Rob Clark
parent 29e6169013
commit 5c82902844
6 changed files with 857 additions and 758 deletions

View File

@ -1,5 +1,5 @@
ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
ccflags-$(CONFIG_DRM_MSM_DSI_PLL) += -Idrivers/gpu/drm/msm/dsi
ccflags-$(CONFIG_DRM_MSM_DSI) += -Idrivers/gpu/drm/msm/dsi
msm-y := \
adreno/adreno_device.o \
@ -56,7 +56,9 @@ msm-$(CONFIG_COMMON_CLK) += mdp/mdp4/mdp4_lvds_pll.o
msm-$(CONFIG_DRM_MSM_DSI) += dsi/dsi.o \
dsi/dsi_host.o \
dsi/dsi_manager.o \
dsi/dsi_phy.o \
dsi/phy/dsi_phy.o \
dsi/phy/dsi_phy_20nm.o \
dsi/phy/dsi_phy_28nm.o \
mdp/mdp5/mdp5_cmd_encoder.o
msm-$(CONFIG_DRM_MSM_DSI_PLL) += dsi/pll/dsi_pll.o \

View File

@ -1,756 +0,0 @@
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include "dsi.h"
#include "dsi.xml.h"
#define dsi_phy_read(offset) msm_readl((offset))
#define dsi_phy_write(offset, data) msm_writel((data), (offset))
struct dsi_phy_ops {
int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate);
void (*disable)(struct msm_dsi_phy *phy);
};
struct dsi_phy_cfg {
enum msm_dsi_phy_type type;
struct dsi_reg_config reg_cfg;
struct dsi_phy_ops ops;
/* Each cell {phy_id, pll_id} of the truth table indicates
* if the source PLL is on the right side of the PHY.
* Fill default H/W values in illegal cells, eg. cell {0, 1}.
*/
bool src_pll_truthtable[DSI_MAX][DSI_MAX];
};
struct dsi_dphy_timing {
u32 clk_pre;
u32 clk_post;
u32 clk_zero;
u32 clk_trail;
u32 clk_prepare;
u32 hs_exit;
u32 hs_zero;
u32 hs_prepare;
u32 hs_trail;
u32 hs_rqst;
u32 ta_go;
u32 ta_sure;
u32 ta_get;
};
struct msm_dsi_phy {
struct platform_device *pdev;
void __iomem *base;
void __iomem *reg_base;
int id;
struct clk *ahb_clk;
struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
struct dsi_dphy_timing timing;
const struct dsi_phy_cfg *cfg;
bool regulator_ldo_mode;
struct msm_dsi_pll *pll;
};
static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
struct device *dev = &phy->pdev->dev;
int num = phy->cfg->reg_cfg.num;
int i, ret;
for (i = 0; i < num; i++)
s[i].supply = regs[i].name;
ret = devm_regulator_bulk_get(&phy->pdev->dev, num, s);
if (ret < 0) {
dev_err(dev, "%s: failed to init regulator, ret=%d\n",
__func__, ret);
return ret;
}
for (i = 0; i < num; i++) {
if ((regs[i].min_voltage >= 0) && (regs[i].max_voltage >= 0)) {
ret = regulator_set_voltage(s[i].consumer,
regs[i].min_voltage, regs[i].max_voltage);
if (ret < 0) {
dev_err(dev,
"regulator %d set voltage failed, %d\n",
i, ret);
return ret;
}
}
}
return 0;
}
static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
int num = phy->cfg->reg_cfg.num;
int i;
DBG("");
for (i = num - 1; i >= 0; i--)
if (regs[i].disable_load >= 0)
regulator_set_load(s[i].consumer,
regs[i].disable_load);
regulator_bulk_disable(num, s);
}
static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
struct device *dev = &phy->pdev->dev;
int num = phy->cfg->reg_cfg.num;
int ret, i;
DBG("");
for (i = 0; i < num; i++) {
if (regs[i].enable_load >= 0) {
ret = regulator_set_load(s[i].consumer,
regs[i].enable_load);
if (ret < 0) {
dev_err(dev,
"regulator %d set op mode failed, %d\n",
i, ret);
goto fail;
}
}
}
ret = regulator_bulk_enable(num, s);
if (ret < 0) {
dev_err(dev, "regulator enable failed, %d\n", ret);
goto fail;
}
return 0;
fail:
for (i--; i >= 0; i--)
regulator_set_load(s[i].consumer, regs[i].disable_load);
return ret;
}
static void dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask)
{
int phy_id = phy->id;
u32 val;
if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
return;
val = dsi_phy_read(phy->base + reg);
if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
dsi_phy_write(phy->base + reg, val | bit_mask);
else
dsi_phy_write(phy->base + reg, val & (~bit_mask));
}
#define S_DIV_ROUND_UP(n, d) \
(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
s32 min_result, bool even)
{
s32 v;
v = (tmax - tmin) * percent;
v = S_DIV_ROUND_UP(v, 100) + tmin;
if (even && (v & 0x1))
return max_t(s32, min_result, v - 1);
else
return max_t(s32, min_result, v);
}
static void dsi_dphy_timing_calc_clk_zero(struct dsi_dphy_timing *timing,
s32 ui, s32 coeff, s32 pcnt)
{
s32 tmax, tmin, clk_z;
s32 temp;
/* reset */
temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
if (tmin > 255) {
tmax = 511;
clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
} else {
tmax = 255;
clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
}
/* adjust */
temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
timing->clk_zero = clk_z + 8 - temp;
}
static int dsi_dphy_timing_calc(struct dsi_dphy_timing *timing,
const unsigned long bit_rate, const unsigned long esc_rate)
{
s32 ui, lpx;
s32 tmax, tmin;
s32 pcnt0 = 10;
s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
s32 pcnt2 = 10;
s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
s32 coeff = 1000; /* Precision, should avoid overflow */
s32 temp;
if (!bit_rate || !esc_rate)
return -EINVAL;
ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
temp = lpx / ui;
if (temp & 0x1)
timing->hs_rqst = temp;
else
timing->hs_rqst = max_t(s32, 0, temp - 2);
/* Calculate clk_zero after clk_prepare and hs_rqst */
dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
temp = 85 * coeff + 6 * ui;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
temp = 40 * coeff + 4 * ui;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
tmax = 255;
temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
temp = 145 * coeff + 10 * ui - temp;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
temp = 60 * coeff + 4 * ui;
tmin = DIV_ROUND_UP(temp, ui) - 2;
timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
tmax = 255;
tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
tmax = 63;
temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
temp = 60 * coeff + 52 * ui - 24 * ui - temp;
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
tmax = 63;
temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
temp += 8 * ui + lpx;
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
if (tmin > tmax) {
temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false) >> 1;
timing->clk_pre = temp >> 1;
temp = (2 * tmax - tmin) * pcnt2;
} else {
timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
}
timing->ta_go = 3;
timing->ta_sure = 0;
timing->ta_get = 4;
DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
timing->clk_pre, timing->clk_post, timing->clk_zero,
timing->clk_trail, timing->clk_prepare, timing->hs_exit,
timing->hs_zero, timing->hs_prepare, timing->hs_trail,
timing->hs_rqst);
return 0;
}
static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
{
void __iomem *base = phy->reg_base;
if (!enable) {
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
return;
}
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
}
static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
struct dsi_dphy_timing *timing = &phy->timing;
int i;
void __iomem *base = phy->base;
DBG("");
if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
pr_err("%s: D-PHY timing calculation failed\n", __func__);
return -EINVAL;
}
dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
dsi_28nm_phy_regulator_ctrl(phy, true);
dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
if (timing->clk_zero & BIT(8))
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
for (i = 0; i < 4; i++) {
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
}
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
dsi_phy_set_src_pll(phy, src_pll_id, REG_DSI_28nm_PHY_GLBL_TEST_CTRL,
DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
return 0;
}
static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
{
dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
dsi_28nm_phy_regulator_ctrl(phy, false);
/*
* Wait for the registers writes to complete in order to
* ensure that the phy is completely disabled
*/
wmb();
}
static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
{
void __iomem *base = phy->reg_base;
if (!enable) {
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
return;
}
if (phy->regulator_ldo_mode) {
dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
return;
}
/* non LDO mode */
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
}
static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
struct dsi_dphy_timing *timing = &phy->timing;
int i;
void __iomem *base = phy->base;
u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
DBG("");
if (dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
pr_err("%s: D-PHY timing calculation failed\n", __func__);
return -EINVAL;
}
dsi_20nm_phy_regulator_ctrl(phy, true);
dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
dsi_phy_set_src_pll(phy, src_pll_id, REG_DSI_20nm_PHY_GLBL_TEST_CTRL,
DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
for (i = 0; i < 4; i++) {
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
(i >> 1) * 0x40);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
}
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
if (timing->clk_zero & BIT(8))
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
/* make sure everything is written before enable */
wmb();
dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
return 0;
}
static void dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
{
dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
dsi_20nm_phy_regulator_ctrl(phy, false);
}
static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
{
int ret;
pm_runtime_get_sync(&phy->pdev->dev);
ret = clk_prepare_enable(phy->ahb_clk);
if (ret) {
pr_err("%s: can't enable ahb clk, %d\n", __func__, ret);
pm_runtime_put_sync(&phy->pdev->dev);
}
return ret;
}
static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
{
clk_disable_unprepare(phy->ahb_clk);
pm_runtime_put_sync(&phy->pdev->dev);
}
static const struct dsi_phy_cfg dsi_phy_cfgs[MSM_DSI_PHY_MAX] = {
[MSM_DSI_PHY_28NM_HPM] = {
.type = MSM_DSI_PHY_28NM_HPM,
.src_pll_truthtable = { {true, true}, {false, true} },
.reg_cfg = {
.num = 1,
.regs = {
{"vddio", 1800000, 1800000, 100000, 100},
},
},
.ops = {
.enable = dsi_28nm_phy_enable,
.disable = dsi_28nm_phy_disable,
}
},
[MSM_DSI_PHY_28NM_LP] = {
.type = MSM_DSI_PHY_28NM_LP,
.src_pll_truthtable = { {true, true}, {true, true} },
.reg_cfg = {
.num = 1,
.regs = {
{"vddio", 1800000, 1800000, 100000, 100},
},
},
.ops = {
.enable = dsi_28nm_phy_enable,
.disable = dsi_28nm_phy_disable,
}
},
[MSM_DSI_PHY_20NM] = {
.type = MSM_DSI_PHY_20NM,
.src_pll_truthtable = { {false, true}, {false, true} },
.reg_cfg = {
.num = 2,
.regs = {
{"vddio", 1800000, 1800000, 100000, 100},
{"vcca", 1000000, 1000000, 10000, 100},
},
},
.ops = {
.enable = dsi_20nm_phy_enable,
.disable = dsi_20nm_phy_disable,
}
},
};
static const struct of_device_id dsi_phy_dt_match[] = {
{ .compatible = "qcom,dsi-phy-28nm-hpm",
.data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_HPM],},
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_cfgs[MSM_DSI_PHY_28NM_LP],},
{ .compatible = "qcom,dsi-phy-20nm",
.data = &dsi_phy_cfgs[MSM_DSI_PHY_20NM],},
{}
};
static int dsi_phy_driver_probe(struct platform_device *pdev)
{
struct msm_dsi_phy *phy;
const struct of_device_id *match;
int ret;
phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
match = of_match_node(dsi_phy_dt_match, pdev->dev.of_node);
if (!match)
return -ENODEV;
phy->cfg = match->data;
phy->pdev = pdev;
ret = of_property_read_u32(pdev->dev.of_node,
"qcom,dsi-phy-index", &phy->id);
if (ret) {
dev_err(&pdev->dev,
"%s: PHY index not specified, ret=%d\n",
__func__, ret);
goto fail;
}
phy->regulator_ldo_mode = of_property_read_bool(pdev->dev.of_node,
"qcom,dsi-phy-regulator-ldo-mode");
phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
if (IS_ERR(phy->base)) {
dev_err(&pdev->dev, "%s: failed to map phy base\n", __func__);
ret = -ENOMEM;
goto fail;
}
phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator", "DSI_PHY_REG");
if (IS_ERR(phy->reg_base)) {
dev_err(&pdev->dev,
"%s: failed to map phy regulator base\n", __func__);
ret = -ENOMEM;
goto fail;
}
ret = dsi_phy_regulator_init(phy);
if (ret) {
dev_err(&pdev->dev, "%s: failed to init regulator\n", __func__);
goto fail;
}
phy->ahb_clk = devm_clk_get(&pdev->dev, "iface_clk");
if (IS_ERR(phy->ahb_clk)) {
pr_err("%s: Unable to get ahb clk\n", __func__);
ret = PTR_ERR(phy->ahb_clk);
goto fail;
}
/* PLL init will call into clk_register which requires
* register access, so we need to enable power and ahb clock.
*/
ret = dsi_phy_enable_resource(phy);
if (ret)
goto fail;
phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
if (!phy->pll)
dev_info(&pdev->dev,
"%s: pll init failed, need separate pll clk driver\n",
__func__);
dsi_phy_disable_resource(phy);
platform_set_drvdata(pdev, phy);
return 0;
fail:
return ret;
}
static int dsi_phy_driver_remove(struct platform_device *pdev)
{
struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
if (phy && phy->pll) {
msm_dsi_pll_destroy(phy->pll);
phy->pll = NULL;
}
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver dsi_phy_platform_driver = {
.probe = dsi_phy_driver_probe,
.remove = dsi_phy_driver_remove,
.driver = {
.name = "msm_dsi_phy",
.of_match_table = dsi_phy_dt_match,
},
};
void __init msm_dsi_phy_driver_register(void)
{
platform_driver_register(&dsi_phy_platform_driver);
}
void __exit msm_dsi_phy_driver_unregister(void)
{
platform_driver_unregister(&dsi_phy_platform_driver);
}
int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
int ret;
if (!phy || !phy->cfg->ops.enable)
return -EINVAL;
ret = dsi_phy_regulator_enable(phy);
if (ret) {
dev_err(&phy->pdev->dev, "%s: regulator enable failed, %d\n",
__func__, ret);
return ret;
}
return phy->cfg->ops.enable(phy, src_pll_id, bit_rate, esc_rate);
}
void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
{
if (!phy || !phy->cfg->ops.disable)
return;
phy->cfg->ops.disable(phy);
dsi_phy_regulator_disable(phy);
}
void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
u32 *clk_pre, u32 *clk_post)
{
if (!phy)
return;
if (clk_pre)
*clk_pre = phy->timing.clk_pre;
if (clk_post)
*clk_post = phy->timing.clk_post;
}
struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
{
if (!phy)
return NULL;
return phy->pll;
}

View File

@ -0,0 +1,448 @@
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/platform_device.h>
#include "dsi_phy.h"
#define S_DIV_ROUND_UP(n, d) \
(((n) >= 0) ? (((n) + (d) - 1) / (d)) : (((n) - (d) + 1) / (d)))
static inline s32 linear_inter(s32 tmax, s32 tmin, s32 percent,
s32 min_result, bool even)
{
s32 v;
v = (tmax - tmin) * percent;
v = S_DIV_ROUND_UP(v, 100) + tmin;
if (even && (v & 0x1))
return max_t(s32, min_result, v - 1);
else
return max_t(s32, min_result, v);
}
static void dsi_dphy_timing_calc_clk_zero(struct msm_dsi_dphy_timing *timing,
s32 ui, s32 coeff, s32 pcnt)
{
s32 tmax, tmin, clk_z;
s32 temp;
/* reset */
temp = 300 * coeff - ((timing->clk_prepare >> 1) + 1) * 2 * ui;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
if (tmin > 255) {
tmax = 511;
clk_z = linear_inter(2 * tmin, tmin, pcnt, 0, true);
} else {
tmax = 255;
clk_z = linear_inter(tmax, tmin, pcnt, 0, true);
}
/* adjust */
temp = (timing->hs_rqst + timing->clk_prepare + clk_z) & 0x7;
timing->clk_zero = clk_z + 8 - temp;
}
int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
const unsigned long bit_rate, const unsigned long esc_rate)
{
s32 ui, lpx;
s32 tmax, tmin;
s32 pcnt0 = 10;
s32 pcnt1 = (bit_rate > 1200000000) ? 15 : 10;
s32 pcnt2 = 10;
s32 pcnt3 = (bit_rate > 180000000) ? 10 : 40;
s32 coeff = 1000; /* Precision, should avoid overflow */
s32 temp;
if (!bit_rate || !esc_rate)
return -EINVAL;
ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);
tmax = S_DIV_ROUND_UP(95 * coeff, ui) - 2;
tmin = S_DIV_ROUND_UP(38 * coeff, ui) - 2;
timing->clk_prepare = linear_inter(tmax, tmin, pcnt0, 0, true);
temp = lpx / ui;
if (temp & 0x1)
timing->hs_rqst = temp;
else
timing->hs_rqst = max_t(s32, 0, temp - 2);
/* Calculate clk_zero after clk_prepare and hs_rqst */
dsi_dphy_timing_calc_clk_zero(timing, ui, coeff, pcnt2);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
tmin = S_DIV_ROUND_UP(60 * coeff, ui) - 2;
timing->clk_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
temp = 85 * coeff + 6 * ui;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
temp = 40 * coeff + 4 * ui;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
timing->hs_prepare = linear_inter(tmax, tmin, pcnt1, 0, true);
tmax = 255;
temp = ((timing->hs_prepare >> 1) + 1) * 2 * ui + 2 * ui;
temp = 145 * coeff + 10 * ui - temp;
tmin = S_DIV_ROUND_UP(temp, ui) - 2;
timing->hs_zero = linear_inter(tmax, tmin, pcnt2, 24, true);
temp = 105 * coeff + 12 * ui - 20 * coeff;
tmax = S_DIV_ROUND_UP(temp, ui) - 2;
temp = 60 * coeff + 4 * ui;
tmin = DIV_ROUND_UP(temp, ui) - 2;
timing->hs_trail = linear_inter(tmax, tmin, pcnt3, 0, true);
tmax = 255;
tmin = S_DIV_ROUND_UP(100 * coeff, ui) - 2;
timing->hs_exit = linear_inter(tmax, tmin, pcnt2, 0, true);
tmax = 63;
temp = ((timing->hs_exit >> 1) + 1) * 2 * ui;
temp = 60 * coeff + 52 * ui - 24 * ui - temp;
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
timing->clk_post = linear_inter(tmax, tmin, pcnt2, 0, false);
tmax = 63;
temp = ((timing->clk_prepare >> 1) + 1) * 2 * ui;
temp += ((timing->clk_zero >> 1) + 1) * 2 * ui;
temp += 8 * ui + lpx;
tmin = S_DIV_ROUND_UP(temp, 8 * ui) - 1;
if (tmin > tmax) {
temp = linear_inter(2 * tmax, tmin, pcnt2, 0, false);
timing->clk_pre = temp >> 1;
} else {
timing->clk_pre = linear_inter(tmax, tmin, pcnt2, 0, false);
}
timing->ta_go = 3;
timing->ta_sure = 0;
timing->ta_get = 4;
DBG("PHY timings: %d, %d, %d, %d, %d, %d, %d, %d, %d, %d",
timing->clk_pre, timing->clk_post, timing->clk_zero,
timing->clk_trail, timing->clk_prepare, timing->hs_exit,
timing->hs_zero, timing->hs_prepare, timing->hs_trail,
timing->hs_rqst);
return 0;
}
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask)
{
int phy_id = phy->id;
u32 val;
if ((phy_id >= DSI_MAX) || (pll_id >= DSI_MAX))
return;
val = dsi_phy_read(phy->base + reg);
if (phy->cfg->src_pll_truthtable[phy_id][pll_id])
dsi_phy_write(phy->base + reg, val | bit_mask);
else
dsi_phy_write(phy->base + reg, val & (~bit_mask));
}
static int dsi_phy_regulator_init(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
struct device *dev = &phy->pdev->dev;
int num = phy->cfg->reg_cfg.num;
int i, ret;
for (i = 0; i < num; i++)
s[i].supply = regs[i].name;
ret = devm_regulator_bulk_get(dev, num, s);
if (ret < 0) {
dev_err(dev, "%s: failed to init regulator, ret=%d\n",
__func__, ret);
return ret;
}
for (i = 0; i < num; i++) {
if ((regs[i].min_voltage >= 0) && (regs[i].max_voltage >= 0)) {
ret = regulator_set_voltage(s[i].consumer,
regs[i].min_voltage, regs[i].max_voltage);
if (ret < 0) {
dev_err(dev,
"regulator %d set voltage failed, %d\n",
i, ret);
return ret;
}
}
}
return 0;
}
static void dsi_phy_regulator_disable(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
int num = phy->cfg->reg_cfg.num;
int i;
DBG("");
for (i = num - 1; i >= 0; i--)
if (regs[i].disable_load >= 0)
regulator_set_load(s[i].consumer, regs[i].disable_load);
regulator_bulk_disable(num, s);
}
static int dsi_phy_regulator_enable(struct msm_dsi_phy *phy)
{
struct regulator_bulk_data *s = phy->supplies;
const struct dsi_reg_entry *regs = phy->cfg->reg_cfg.regs;
struct device *dev = &phy->pdev->dev;
int num = phy->cfg->reg_cfg.num;
int ret, i;
DBG("");
for (i = 0; i < num; i++) {
if (regs[i].enable_load >= 0) {
ret = regulator_set_load(s[i].consumer,
regs[i].enable_load);
if (ret < 0) {
dev_err(dev,
"regulator %d set op mode failed, %d\n",
i, ret);
goto fail;
}
}
}
ret = regulator_bulk_enable(num, s);
if (ret < 0) {
dev_err(dev, "regulator enable failed, %d\n", ret);
goto fail;
}
return 0;
fail:
for (i--; i >= 0; i--)
regulator_set_load(s[i].consumer, regs[i].disable_load);
return ret;
}
static int dsi_phy_enable_resource(struct msm_dsi_phy *phy)
{
struct device *dev = &phy->pdev->dev;
int ret;
pm_runtime_get_sync(dev);
ret = clk_prepare_enable(phy->ahb_clk);
if (ret) {
dev_err(dev, "%s: can't enable ahb clk, %d\n", __func__, ret);
pm_runtime_put_sync(dev);
}
return ret;
}
static void dsi_phy_disable_resource(struct msm_dsi_phy *phy)
{
clk_disable_unprepare(phy->ahb_clk);
pm_runtime_put_sync(&phy->pdev->dev);
}
static const struct of_device_id dsi_phy_dt_match[] = {
{ .compatible = "qcom,dsi-phy-28nm-hpm",
.data = &dsi_phy_28nm_hpm_cfgs },
{ .compatible = "qcom,dsi-phy-28nm-lp",
.data = &dsi_phy_28nm_lp_cfgs },
{ .compatible = "qcom,dsi-phy-20nm",
.data = &dsi_phy_20nm_cfgs },
{}
};
static int dsi_phy_driver_probe(struct platform_device *pdev)
{
struct msm_dsi_phy *phy;
struct device *dev = &pdev->dev;
const struct of_device_id *match;
int ret;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
match = of_match_node(dsi_phy_dt_match, dev->of_node);
if (!match)
return -ENODEV;
phy->cfg = match->data;
phy->pdev = pdev;
ret = of_property_read_u32(dev->of_node,
"qcom,dsi-phy-index", &phy->id);
if (ret) {
dev_err(dev, "%s: PHY index not specified, %d\n",
__func__, ret);
goto fail;
}
phy->regulator_ldo_mode = of_property_read_bool(dev->of_node,
"qcom,dsi-phy-regulator-ldo-mode");
phy->base = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
if (IS_ERR(phy->base)) {
dev_err(dev, "%s: failed to map phy base\n", __func__);
ret = -ENOMEM;
goto fail;
}
phy->reg_base = msm_ioremap(pdev, "dsi_phy_regulator",
"DSI_PHY_REG");
if (IS_ERR(phy->reg_base)) {
dev_err(dev, "%s: failed to map phy regulator base\n",
__func__);
ret = -ENOMEM;
goto fail;
}
ret = dsi_phy_regulator_init(phy);
if (ret) {
dev_err(dev, "%s: failed to init regulator\n", __func__);
goto fail;
}
phy->ahb_clk = devm_clk_get(dev, "iface_clk");
if (IS_ERR(phy->ahb_clk)) {
dev_err(dev, "%s: Unable to get ahb clk\n", __func__);
ret = PTR_ERR(phy->ahb_clk);
goto fail;
}
/* PLL init will call into clk_register which requires
* register access, so we need to enable power and ahb clock.
*/
ret = dsi_phy_enable_resource(phy);
if (ret)
goto fail;
phy->pll = msm_dsi_pll_init(pdev, phy->cfg->type, phy->id);
if (!phy->pll)
dev_info(dev,
"%s: pll init failed, need separate pll clk driver\n",
__func__);
dsi_phy_disable_resource(phy);
platform_set_drvdata(pdev, phy);
return 0;
fail:
return ret;
}
static int dsi_phy_driver_remove(struct platform_device *pdev)
{
struct msm_dsi_phy *phy = platform_get_drvdata(pdev);
if (phy && phy->pll) {
msm_dsi_pll_destroy(phy->pll);
phy->pll = NULL;
}
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver dsi_phy_platform_driver = {
.probe = dsi_phy_driver_probe,
.remove = dsi_phy_driver_remove,
.driver = {
.name = "msm_dsi_phy",
.of_match_table = dsi_phy_dt_match,
},
};
void __init msm_dsi_phy_driver_register(void)
{
platform_driver_register(&dsi_phy_platform_driver);
}
void __exit msm_dsi_phy_driver_unregister(void)
{
platform_driver_unregister(&dsi_phy_platform_driver);
}
int msm_dsi_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
struct device *dev = &phy->pdev->dev;
int ret;
if (!phy || !phy->cfg->ops.enable)
return -EINVAL;
ret = dsi_phy_regulator_enable(phy);
if (ret) {
dev_err(dev, "%s: regulator enable failed, %d\n",
__func__, ret);
return ret;
}
ret = phy->cfg->ops.enable(phy, src_pll_id, bit_rate, esc_rate);
if (ret) {
dev_err(dev, "%s: phy enable failed, %d\n", __func__, ret);
dsi_phy_regulator_disable(phy);
return ret;
}
return 0;
}
void msm_dsi_phy_disable(struct msm_dsi_phy *phy)
{
if (!phy || !phy->cfg->ops.disable)
return;
phy->cfg->ops.disable(phy);
dsi_phy_regulator_disable(phy);
}
void msm_dsi_phy_get_clk_pre_post(struct msm_dsi_phy *phy,
u32 *clk_pre, u32 *clk_post)
{
if (!phy)
return;
if (clk_pre)
*clk_pre = phy->timing.clk_pre;
if (clk_post)
*clk_post = phy->timing.clk_post;
}
struct msm_dsi_pll *msm_dsi_phy_get_pll(struct msm_dsi_phy *phy)
{
if (!phy)
return NULL;
return phy->pll;
}

View File

@ -0,0 +1,89 @@
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __DSI_PHY_H__
#define __DSI_PHY_H__
#include <linux/regulator/consumer.h>
#include "dsi.h"
#define dsi_phy_read(offset) msm_readl((offset))
#define dsi_phy_write(offset, data) msm_writel((data), (offset))
struct msm_dsi_phy_ops {
int (*enable)(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate);
void (*disable)(struct msm_dsi_phy *phy);
};
struct msm_dsi_phy_cfg {
enum msm_dsi_phy_type type;
struct dsi_reg_config reg_cfg;
struct msm_dsi_phy_ops ops;
/*
* Each cell {phy_id, pll_id} of the truth table indicates
* if the source PLL selection bit should be set for each PHY.
* Fill default H/W values in illegal cells, eg. cell {0, 1}.
*/
bool src_pll_truthtable[DSI_MAX][DSI_MAX];
};
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs;
extern const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs;
struct msm_dsi_dphy_timing {
u32 clk_pre;
u32 clk_post;
u32 clk_zero;
u32 clk_trail;
u32 clk_prepare;
u32 hs_exit;
u32 hs_zero;
u32 hs_prepare;
u32 hs_trail;
u32 hs_rqst;
u32 ta_go;
u32 ta_sure;
u32 ta_get;
};
struct msm_dsi_phy {
struct platform_device *pdev;
void __iomem *base;
void __iomem *reg_base;
int id;
struct clk *ahb_clk;
struct regulator_bulk_data supplies[DSI_DEV_REGULATOR_MAX];
struct msm_dsi_dphy_timing timing;
const struct msm_dsi_phy_cfg *cfg;
bool regulator_ldo_mode;
struct msm_dsi_pll *pll;
};
/*
* PHY internal functions
*/
int msm_dsi_dphy_timing_calc(struct msm_dsi_dphy_timing *timing,
const unsigned long bit_rate, const unsigned long esc_rate);
void msm_dsi_phy_set_src_pll(struct msm_dsi_phy *phy, int pll_id, u32 reg,
u32 bit_mask);
#endif /* __DSI_PHY_H__ */

View File

@ -0,0 +1,150 @@
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "dsi_phy.h"
#include "dsi.xml.h"
static void dsi_20nm_dphy_set_timing(struct msm_dsi_phy *phy,
struct msm_dsi_dphy_timing *timing)
{
void __iomem *base = phy->base;
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_0,
DSI_20nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_1,
DSI_20nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_2,
DSI_20nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
if (timing->clk_zero & BIT(8))
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_3,
DSI_20nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_4,
DSI_20nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_5,
DSI_20nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_6,
DSI_20nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_7,
DSI_20nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_8,
DSI_20nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_9,
DSI_20nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
DSI_20nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_10,
DSI_20nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
dsi_phy_write(base + REG_DSI_20nm_PHY_TIMING_CTRL_11,
DSI_20nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
}
static void dsi_20nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
{
void __iomem *base = phy->reg_base;
if (!enable) {
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
return;
}
if (phy->regulator_ldo_mode) {
dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x1d);
return;
}
/* non LDO mode */
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_1, 0x03);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_2, 0x03);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_3, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_4, 0x20);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CAL_PWR_CFG, 0x01);
dsi_phy_write(phy->base + REG_DSI_20nm_PHY_LDO_CNTRL, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_REGULATOR_CTRL_0, 0x03);
}
static int dsi_20nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
struct msm_dsi_dphy_timing *timing = &phy->timing;
int i;
void __iomem *base = phy->base;
u32 cfg_4[4] = {0x20, 0x40, 0x20, 0x00};
DBG("");
if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
dev_err(&phy->pdev->dev,
"%s: D-PHY timing calculation failed\n", __func__);
return -EINVAL;
}
dsi_20nm_phy_regulator_ctrl(phy, true);
dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_0, 0xff);
msm_dsi_phy_set_src_pll(phy, src_pll_id,
REG_DSI_20nm_PHY_GLBL_TEST_CTRL,
DSI_20nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
for (i = 0; i < 4; i++) {
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_3(i),
(i >> 1) * 0x40);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_0(i), 0x01);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_TEST_STR_1(i), 0x46);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_0(i), 0x02);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_1(i), 0xa0);
dsi_phy_write(base + REG_DSI_20nm_PHY_LN_CFG_4(i), cfg_4[i]);
}
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_3, 0x80);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR0, 0x01);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_TEST_STR1, 0x46);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_0, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_1, 0xa0);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_2, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_LNCK_CFG_4, 0x00);
dsi_20nm_dphy_set_timing(phy, timing);
dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_1, 0x00);
dsi_phy_write(base + REG_DSI_20nm_PHY_STRENGTH_1, 0x06);
/* make sure everything is written before enable */
wmb();
dsi_phy_write(base + REG_DSI_20nm_PHY_CTRL_0, 0x7f);
return 0;
}
static void dsi_20nm_phy_disable(struct msm_dsi_phy *phy)
{
dsi_phy_write(phy->base + REG_DSI_20nm_PHY_CTRL_0, 0);
dsi_20nm_phy_regulator_ctrl(phy, false);
}
const struct msm_dsi_phy_cfg dsi_phy_20nm_cfgs = {
.type = MSM_DSI_PHY_20NM,
.src_pll_truthtable = { {false, true}, {false, true} },
.reg_cfg = {
.num = 2,
.regs = {
{"vddio", 1800000, 1800000, 100000, 100},
{"vcca", 1000000, 1000000, 10000, 100},
},
},
.ops = {
.enable = dsi_20nm_phy_enable,
.disable = dsi_20nm_phy_disable,
}
};

View File

@ -0,0 +1,166 @@
/*
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "dsi_phy.h"
#include "dsi.xml.h"
static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
struct msm_dsi_dphy_timing *timing)
{
void __iomem *base = phy->base;
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_0,
DSI_28nm_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_1,
DSI_28nm_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_2,
DSI_28nm_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare));
if (timing->clk_zero & BIT(8))
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_3,
DSI_28nm_PHY_TIMING_CTRL_3_CLK_ZERO_8);
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_4,
DSI_28nm_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_5,
DSI_28nm_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_6,
DSI_28nm_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_7,
DSI_28nm_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_8,
DSI_28nm_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_9,
DSI_28nm_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
DSI_28nm_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_10,
DSI_28nm_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get));
dsi_phy_write(base + REG_DSI_28nm_PHY_TIMING_CTRL_11,
DSI_28nm_PHY_TIMING_CTRL_11_TRIG3_CMD(0));
}
static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy, bool enable)
{
void __iomem *base = phy->reg_base;
if (!enable) {
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 0);
return;
}
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x0);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CAL_PWR_CFG, 1);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_5, 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_3, 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_2, 0x3);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_1, 0x9);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_0, 0x7);
dsi_phy_write(base + REG_DSI_28nm_PHY_REGULATOR_CTRL_4, 0x20);
}
static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy, int src_pll_id,
const unsigned long bit_rate, const unsigned long esc_rate)
{
struct msm_dsi_dphy_timing *timing = &phy->timing;
int i;
void __iomem *base = phy->base;
DBG("");
if (msm_dsi_dphy_timing_calc(timing, bit_rate, esc_rate)) {
dev_err(&phy->pdev->dev,
"%s: D-PHY timing calculation failed\n", __func__);
return -EINVAL;
}
dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_0, 0xff);
dsi_28nm_phy_regulator_ctrl(phy, true);
dsi_phy_write(base + REG_DSI_28nm_PHY_LDO_CNTRL, 0x00);
dsi_28nm_dphy_set_timing(phy, timing);
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_1, 0x00);
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
dsi_phy_write(base + REG_DSI_28nm_PHY_STRENGTH_1, 0x6);
for (i = 0; i < 4; i++) {
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_0(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_1(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_2(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_3(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_DATAPATH(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_DEBUG_SEL(i), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_0(i), 0x1);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_TEST_STR_1(i), 0x97);
}
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(0), 0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(1), 0x5);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(2), 0xa);
dsi_phy_write(base + REG_DSI_28nm_PHY_LN_CFG_4(3), 0xf);
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_CFG_1, 0xc0);
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR0, 0x1);
dsi_phy_write(base + REG_DSI_28nm_PHY_LNCK_TEST_STR1, 0xbb);
dsi_phy_write(base + REG_DSI_28nm_PHY_CTRL_0, 0x5f);
msm_dsi_phy_set_src_pll(phy, src_pll_id,
REG_DSI_28nm_PHY_GLBL_TEST_CTRL,
DSI_28nm_PHY_GLBL_TEST_CTRL_BITCLK_HS_SEL);
return 0;
}
static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
{
dsi_phy_write(phy->base + REG_DSI_28nm_PHY_CTRL_0, 0);
dsi_28nm_phy_regulator_ctrl(phy, false);
/*
* Wait for the registers writes to complete in order to
* ensure that the phy is completely disabled
*/
wmb();
}
const struct msm_dsi_phy_cfg dsi_phy_28nm_hpm_cfgs = {
.type = MSM_DSI_PHY_28NM_HPM,
.src_pll_truthtable = { {true, true}, {false, true} },
.reg_cfg = {
.num = 1,
.regs = {
{"vddio", 1800000, 1800000, 100000, 100},
},
},
.ops = {
.enable = dsi_28nm_phy_enable,
.disable = dsi_28nm_phy_disable,
},
};
const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = {
.type = MSM_DSI_PHY_28NM_LP,
.src_pll_truthtable = { {true, true}, {true, true} },
.reg_cfg = {
.num = 1,
.regs = {
{"vddio", 1800000, 1800000, 100000, 100},
},
},
.ops = {
.enable = dsi_28nm_phy_enable,
.disable = dsi_28nm_phy_disable,
},
};