scsi: mpt3sas: Optimize mpt3sas driver logging
This improves mpt3sas driver default debug information collection and allows for a higher percentage of issues being able to be resolved with a first-time data capture. However, this improvement to balance the amount of debug data captured with the performance of driver. Enabled below print messages with out affecting the IO performance, 1. When task abort TM is received then print IO commands's timeout value and how much time this command has been outstanding. 2. Whenever hard reset occurs then print from where this hard reset has been issued. 3. Failure message should be displayed for failure scenarios without any logging level. 4. Added a print after driver successfully register or unregistered a target drive with the SML. This print will be useful for debugging the issue where the drive addition or deletion is hanging at SML. 5. During driver load time print request, reply, sense and config page pool's information such as its address, length and size. Also printed sg_tablesize information. Link: https://lore.kernel.org/r/20191226111333.26131-8-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This commit is contained in:
Sreekanth Reddy
Martin K. Petersen
parent
c597771894
commit
5b061980e3
|
|
@ -3203,6 +3203,8 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
|
|||
*/
|
||||
if (!ioc->combined_reply_queue &&
|
||||
ioc->hba_mpi_version_belonged != MPI2_VERSION) {
|
||||
ioc_info(ioc,
|
||||
"combined ReplyQueue is off, Enabling msix load balance\n");
|
||||
ioc->msix_load_balance = true;
|
||||
}
|
||||
|
||||
|
|
@ -3215,9 +3217,7 @@ _base_enable_msix(struct MPT3SAS_ADAPTER *ioc)
|
|||
|
||||
r = _base_alloc_irq_vectors(ioc);
|
||||
if (r < 0) {
|
||||
dfailprintk(ioc,
|
||||
ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n",
|
||||
r));
|
||||
ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r);
|
||||
goto try_ioapic;
|
||||
}
|
||||
|
||||
|
|
@ -3385,7 +3385,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
|
|||
}
|
||||
|
||||
if (ioc->chip == NULL) {
|
||||
ioc_err(ioc, "unable to map adapter memory! or resource not found\n");
|
||||
ioc_err(ioc,
|
||||
"unable to map adapter memory! or resource not found\n");
|
||||
r = -EINVAL;
|
||||
goto out_fail;
|
||||
}
|
||||
|
|
@ -3424,8 +3425,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc)
|
|||
ioc->combined_reply_index_count,
|
||||
sizeof(resource_size_t *), GFP_KERNEL);
|
||||
if (!ioc->replyPostRegisterIndex) {
|
||||
dfailprintk(ioc,
|
||||
ioc_warn(ioc, "allocation for reply Post Register Index failed!!!\n"));
|
||||
ioc_err(ioc,
|
||||
"allocation for replyPostRegisterIndex failed!\n");
|
||||
r = -ENOMEM;
|
||||
goto out_fail;
|
||||
}
|
||||
|
|
@ -4370,7 +4371,8 @@ _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc)
|
|||
fwpkg_data = dma_alloc_coherent(&ioc->pdev->dev, data_length,
|
||||
&fwpkg_data_dma, GFP_KERNEL);
|
||||
if (!fwpkg_data) {
|
||||
ioc_err(ioc, "failure at %s:%d/%s()!\n",
|
||||
ioc_err(ioc,
|
||||
"Memory allocation for fwpkg data failed at %s:%d/%s()!\n",
|
||||
__FILE__, __LINE__, __func__);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
|
@ -5100,12 +5102,13 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
|
|||
ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64;
|
||||
}
|
||||
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "scatter gather: sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), chains_per_io(%d)\n",
|
||||
ioc->max_sges_in_main_message,
|
||||
ioc->max_sges_in_chain_message,
|
||||
ioc->shost->sg_tablesize,
|
||||
ioc->chains_needed_per_io));
|
||||
ioc_info(ioc,
|
||||
"scatter gather: sge_in_main_msg(%d), sge_per_chain(%d), "
|
||||
"sge_per_io(%d), chains_per_io(%d)\n",
|
||||
ioc->max_sges_in_main_message,
|
||||
ioc->max_sges_in_chain_message,
|
||||
ioc->shost->sg_tablesize,
|
||||
ioc->chains_needed_per_io);
|
||||
|
||||
/* reply post queue, 16 byte align */
|
||||
reply_post_free_sz = ioc->reply_post_queue_depth *
|
||||
|
|
@ -5215,15 +5218,13 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
|
|||
ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
|
||||
ioc->request_sz);
|
||||
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "request pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n",
|
||||
ioc->request, ioc->hba_queue_depth,
|
||||
ioc->request_sz,
|
||||
(ioc->hba_queue_depth * ioc->request_sz) / 1024));
|
||||
ioc_info(ioc,
|
||||
"request pool(0x%p) - dma(0x%llx): "
|
||||
"depth(%d), frame_size(%d), pool_size(%d kB)\n",
|
||||
ioc->request, (unsigned long long) ioc->request_dma,
|
||||
ioc->hba_queue_depth, ioc->request_sz,
|
||||
(ioc->hba_queue_depth * ioc->request_sz) / 1024);
|
||||
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "request pool: dma(0x%llx)\n",
|
||||
(unsigned long long)ioc->request_dma));
|
||||
total_sz += sz;
|
||||
|
||||
dinitprintk(ioc,
|
||||
|
|
@ -5409,13 +5410,12 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
|
|||
goto out;
|
||||
}
|
||||
}
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "sense pool(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
|
||||
ioc->sense, ioc->scsiio_depth,
|
||||
SCSI_SENSE_BUFFERSIZE, sz / 1024));
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "sense_dma(0x%llx)\n",
|
||||
(unsigned long long)ioc->sense_dma));
|
||||
ioc_info(ioc,
|
||||
"sense pool(0x%p)- dma(0x%llx): depth(%d),"
|
||||
"element_size(%d), pool_size(%d kB)\n",
|
||||
ioc->sense, (unsigned long long)ioc->sense_dma, ioc->scsiio_depth,
|
||||
SCSI_SENSE_BUFFERSIZE, sz / 1024);
|
||||
|
||||
total_sz += sz;
|
||||
|
||||
/* reply pool, 4 byte align */
|
||||
|
|
@ -5493,12 +5493,10 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc)
|
|||
ioc_err(ioc, "config page: dma_pool_alloc failed\n");
|
||||
goto out;
|
||||
}
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "config page(0x%p): size(%d)\n",
|
||||
ioc->config_page, ioc->config_page_sz));
|
||||
dinitprintk(ioc,
|
||||
ioc_info(ioc, "config_page_dma(0x%llx)\n",
|
||||
(unsigned long long)ioc->config_page_dma));
|
||||
|
||||
ioc_info(ioc, "config page(0x%p) - dma(0x%llx): size(%d)\n",
|
||||
ioc->config_page, (unsigned long long)ioc->config_page_dma,
|
||||
ioc->config_page_sz);
|
||||
total_sz += ioc->config_page_sz;
|
||||
|
||||
ioc_info(ioc, "Allocated physical memory: size(%d kB)\n",
|
||||
|
|
@ -5918,7 +5916,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
|
|||
mfp = (__le32 *)reply;
|
||||
pr_info("\toffset:data\n");
|
||||
for (i = 0; i < reply_bytes/4; i++)
|
||||
pr_info("\t[0x%02x]:%08x\n", i*4,
|
||||
ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4,
|
||||
le32_to_cpu(mfp[i]));
|
||||
}
|
||||
return 0;
|
||||
|
|
@ -6368,9 +6366,9 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc)
|
|||
int i;
|
||||
|
||||
mfp = (__le32 *)&mpi_request;
|
||||
pr_info("\toffset:data\n");
|
||||
ioc_info(ioc, "\toffset:data\n");
|
||||
for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
|
||||
pr_info("\t[0x%02x]:%08x\n", i*4,
|
||||
ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4,
|
||||
le32_to_cpu(mfp[i]));
|
||||
}
|
||||
|
||||
|
|
@ -6740,8 +6738,11 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
|
|||
/* wait 100 msec */
|
||||
msleep(100);
|
||||
|
||||
if (count++ > 20)
|
||||
if (count++ > 20) {
|
||||
ioc_info(ioc,
|
||||
"Stop writing magic sequence after 20 retries\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic);
|
||||
drsprintk(ioc,
|
||||
|
|
@ -6765,8 +6766,11 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
|
|||
|
||||
host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic);
|
||||
|
||||
if (host_diagnostic == 0xFFFFFFFF)
|
||||
if (host_diagnostic == 0xFFFFFFFF) {
|
||||
ioc_info(ioc,
|
||||
"Invalid host diagnostic register value\n");
|
||||
goto out;
|
||||
}
|
||||
if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
|
||||
break;
|
||||
|
||||
|
|
@ -6853,7 +6857,7 @@ _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type)
|
|||
return 0;
|
||||
|
||||
if (ioc_state & MPI2_DOORBELL_USED) {
|
||||
dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n"));
|
||||
ioc_info(ioc, "unexpected doorbell active!\n");
|
||||
goto issue_diag_reset;
|
||||
}
|
||||
|
||||
|
|
@ -7123,8 +7127,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
|
|||
ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL);
|
||||
ioc->reply_queue_count = 1;
|
||||
if (!ioc->cpu_msix_table) {
|
||||
dfailprintk(ioc,
|
||||
ioc_info(ioc, "allocation for cpu_msix_table failed!!!\n"));
|
||||
ioc_info(ioc, "Allocation for cpu_msix_table failed!!!\n");
|
||||
r = -ENOMEM;
|
||||
goto out_free_resources;
|
||||
}
|
||||
|
|
@ -7133,8 +7136,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc)
|
|||
ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz,
|
||||
sizeof(resource_size_t *), GFP_KERNEL);
|
||||
if (!ioc->reply_post_host_index) {
|
||||
dfailprintk(ioc,
|
||||
ioc_info(ioc, "allocation for reply_post_host_index failed!!!\n"));
|
||||
ioc_info(ioc, "Allocation for reply_post_host_index failed!!!\n");
|
||||
r = -ENOMEM;
|
||||
goto out_free_resources;
|
||||
}
|
||||
|
|
@ -7693,9 +7695,7 @@ mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc,
|
|||
_base_reset_done_handler(ioc);
|
||||
|
||||
out:
|
||||
dtmprintk(ioc,
|
||||
ioc_info(ioc, "%s: %s\n",
|
||||
__func__, r == 0 ? "SUCCESS" : "FAILED"));
|
||||
ioc_info(ioc, "%s: %s\n", __func__, r == 0 ? "SUCCESS" : "FAILED");
|
||||
|
||||
spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
|
||||
ioc->shost_recovery = 0;
|
||||
|
|
|
|||
|
|
@ -101,9 +101,6 @@ _config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
|
|||
Mpi2ConfigRequest_t *mpi_request;
|
||||
char *desc = NULL;
|
||||
|
||||
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
|
||||
return;
|
||||
|
||||
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
|
||||
switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
|
||||
case MPI2_CONFIG_PAGETYPE_IO_UNIT:
|
||||
|
|
@ -269,7 +266,8 @@ mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
|
|||
mpi_reply->MsgLength*4);
|
||||
}
|
||||
ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
|
||||
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
|
||||
if (ioc->logging_level & MPT_DEBUG_CONFIG)
|
||||
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
|
||||
ioc->config_cmds.smid = USHRT_MAX;
|
||||
complete(&ioc->config_cmds.done);
|
||||
return 1;
|
||||
|
|
@ -378,11 +376,15 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
|
|||
config_request = mpt3sas_base_get_msg_frame(ioc, smid);
|
||||
ioc->config_cmds.smid = smid;
|
||||
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
|
||||
_config_display_some_debug(ioc, smid, "config_request", NULL);
|
||||
if (ioc->logging_level & MPT_DEBUG_CONFIG)
|
||||
_config_display_some_debug(ioc, smid, "config_request", NULL);
|
||||
init_completion(&ioc->config_cmds.done);
|
||||
ioc->put_smid_default(ioc, smid);
|
||||
wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
|
||||
if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
|
||||
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
|
||||
_config_display_some_debug(ioc,
|
||||
smid, "config_request", NULL);
|
||||
mpt3sas_base_check_cmd_timeout(ioc,
|
||||
ioc->config_cmds.status, mpi_request,
|
||||
sizeof(Mpi2ConfigRequest_t)/4);
|
||||
|
|
@ -404,8 +406,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
|
|||
/* Reply Frame Sanity Checks to workaround FW issues */
|
||||
if ((mpi_request->Header.PageType & 0xF) !=
|
||||
(mpi_reply->Header.PageType & 0xF)) {
|
||||
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
|
||||
_config_display_some_debug(ioc,
|
||||
smid, "config_request", NULL);
|
||||
_debug_dump_mf(mpi_request, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
|
||||
panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n",
|
||||
ioc->name, __func__,
|
||||
mpi_request->Header.PageType & 0xF,
|
||||
|
|
@ -415,8 +420,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
|
|||
if (((mpi_request->Header.PageType & 0xF) ==
|
||||
MPI2_CONFIG_PAGETYPE_EXTENDED) &&
|
||||
mpi_request->ExtPageType != mpi_reply->ExtPageType) {
|
||||
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
|
||||
_config_display_some_debug(ioc,
|
||||
smid, "config_request", NULL);
|
||||
_debug_dump_mf(mpi_request, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
|
||||
panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n",
|
||||
ioc->name, __func__,
|
||||
mpi_request->ExtPageType,
|
||||
|
|
@ -439,8 +447,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
|
|||
if (p) {
|
||||
if ((mpi_request->Header.PageType & 0xF) !=
|
||||
(p[3] & 0xF)) {
|
||||
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
|
||||
_config_display_some_debug(ioc,
|
||||
smid, "config_request", NULL);
|
||||
_debug_dump_mf(mpi_request, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
|
||||
_debug_dump_config(p, min_t(u16, mem.sz,
|
||||
config_page_sz)/4);
|
||||
panic("%s: %s: Firmware BUG: config page mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n",
|
||||
|
|
@ -452,8 +463,11 @@ _config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
|
|||
if (((mpi_request->Header.PageType & 0xF) ==
|
||||
MPI2_CONFIG_PAGETYPE_EXTENDED) &&
|
||||
(mpi_request->ExtPageType != p[6])) {
|
||||
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
|
||||
_config_display_some_debug(ioc,
|
||||
smid, "config_request", NULL);
|
||||
_debug_dump_mf(mpi_request, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
|
||||
_debug_dump_reply(mpi_reply, ioc->reply_sz/4);
|
||||
_debug_dump_config(p, min_t(u16, mem.sz,
|
||||
config_page_sz)/4);
|
||||
panic("%s: %s: Firmware BUG: config page mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n",
|
||||
|
|
|
|||
|
|
@ -180,6 +180,12 @@ _ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
|
|||
case MPI2_FUNCTION_SMP_PASSTHROUGH:
|
||||
desc = "smp_passthrough";
|
||||
break;
|
||||
case MPI2_FUNCTION_TOOLBOX:
|
||||
desc = "toolbox";
|
||||
break;
|
||||
case MPI2_FUNCTION_NVME_ENCAPSULATED:
|
||||
desc = "nvme_encapsulated";
|
||||
break;
|
||||
}
|
||||
|
||||
if (!desc)
|
||||
|
|
@ -1326,7 +1332,8 @@ _ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
|
|||
__func__));
|
||||
|
||||
retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
|
||||
ioc_info(ioc, "host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
|
||||
ioc_info(ioc,
|
||||
"Ioctl: host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1604,7 +1604,12 @@ scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
|
|||
max_depth = 1;
|
||||
if (qdepth > max_depth)
|
||||
qdepth = max_depth;
|
||||
return scsi_change_queue_depth(sdev, qdepth);
|
||||
scsi_change_queue_depth(sdev, qdepth);
|
||||
sdev_printk(KERN_INFO, sdev,
|
||||
"qdepth(%d), tagged(%d), scsi_level(%d), cmd_que(%d)\n",
|
||||
sdev->queue_depth, sdev->tagged_supported,
|
||||
sdev->scsi_level, ((sdev->inquiry[7] & 2) >> 1));
|
||||
return sdev->queue_depth;
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
@ -2931,15 +2936,17 @@ scsih_abort(struct scsi_cmnd *scmd)
|
|||
|
||||
u8 timeout = 30;
|
||||
struct _pcie_device *pcie_device = NULL;
|
||||
sdev_printk(KERN_INFO, scmd->device,
|
||||
"attempting task abort! scmd(%p)\n", scmd);
|
||||
sdev_printk(KERN_INFO, scmd->device, "attempting task abort!"
|
||||
"scmd(0x%p), outstanding for %u ms & timeout %u ms\n",
|
||||
scmd, jiffies_to_msecs(jiffies - scmd->jiffies_at_alloc),
|
||||
(scmd->request->timeout / HZ) * 1000);
|
||||
_scsih_tm_display_info(ioc, scmd);
|
||||
|
||||
sas_device_priv_data = scmd->device->hostdata;
|
||||
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
|
||||
ioc->remove_host) {
|
||||
sdev_printk(KERN_INFO, scmd->device,
|
||||
"device been deleted! scmd(%p)\n", scmd);
|
||||
"device been deleted! scmd(0x%p)\n", scmd);
|
||||
scmd->result = DID_NO_CONNECT << 16;
|
||||
scmd->scsi_done(scmd);
|
||||
r = SUCCESS;
|
||||
|
|
@ -2948,6 +2955,8 @@ scsih_abort(struct scsi_cmnd *scmd)
|
|||
|
||||
/* check for completed command */
|
||||
if (st == NULL || st->cb_idx == 0xFF) {
|
||||
sdev_printk(KERN_INFO, scmd->device, "No reference found at "
|
||||
"driver, assuming scmd(0x%p) might have completed\n", scmd);
|
||||
scmd->result = DID_RESET << 16;
|
||||
r = SUCCESS;
|
||||
goto out;
|
||||
|
|
@ -2976,7 +2985,7 @@ scsih_abort(struct scsi_cmnd *scmd)
|
|||
if (r == SUCCESS && st->cb_idx != 0xFF)
|
||||
r = FAILED;
|
||||
out:
|
||||
sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
|
||||
sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(0x%p)\n",
|
||||
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
|
||||
if (pcie_device)
|
||||
pcie_device_put(pcie_device);
|
||||
|
|
@ -3005,14 +3014,14 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
|
|||
struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
|
||||
|
||||
sdev_printk(KERN_INFO, scmd->device,
|
||||
"attempting device reset! scmd(%p)\n", scmd);
|
||||
"attempting device reset! scmd(0x%p)\n", scmd);
|
||||
_scsih_tm_display_info(ioc, scmd);
|
||||
|
||||
sas_device_priv_data = scmd->device->hostdata;
|
||||
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
|
||||
ioc->remove_host) {
|
||||
sdev_printk(KERN_INFO, scmd->device,
|
||||
"device been deleted! scmd(%p)\n", scmd);
|
||||
"device been deleted! scmd(0x%p)\n", scmd);
|
||||
scmd->result = DID_NO_CONNECT << 16;
|
||||
scmd->scsi_done(scmd);
|
||||
r = SUCCESS;
|
||||
|
|
@ -3052,7 +3061,7 @@ scsih_dev_reset(struct scsi_cmnd *scmd)
|
|||
if (r == SUCCESS && atomic_read(&scmd->device->device_busy))
|
||||
r = FAILED;
|
||||
out:
|
||||
sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
|
||||
sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(0x%p)\n",
|
||||
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
|
||||
|
||||
if (sas_device)
|
||||
|
|
@ -3083,15 +3092,15 @@ scsih_target_reset(struct scsi_cmnd *scmd)
|
|||
struct scsi_target *starget = scmd->device->sdev_target;
|
||||
struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
|
||||
|
||||
starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
|
||||
scmd);
|
||||
starget_printk(KERN_INFO, starget,
|
||||
"attempting target reset! scmd(0x%p)\n", scmd);
|
||||
_scsih_tm_display_info(ioc, scmd);
|
||||
|
||||
sas_device_priv_data = scmd->device->hostdata;
|
||||
if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
|
||||
ioc->remove_host) {
|
||||
starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
|
||||
scmd);
|
||||
starget_printk(KERN_INFO, starget,
|
||||
"target been deleted! scmd(0x%p)\n", scmd);
|
||||
scmd->result = DID_NO_CONNECT << 16;
|
||||
scmd->scsi_done(scmd);
|
||||
r = SUCCESS;
|
||||
|
|
@ -3130,7 +3139,7 @@ scsih_target_reset(struct scsi_cmnd *scmd)
|
|||
if (r == SUCCESS && atomic_read(&starget->target_busy))
|
||||
r = FAILED;
|
||||
out:
|
||||
starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
|
||||
starget_printk(KERN_INFO, starget, "target reset: %s scmd(0x%p)\n",
|
||||
((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
|
||||
|
||||
if (sas_device)
|
||||
|
|
@ -3153,7 +3162,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
|
|||
struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
|
||||
int r, retval;
|
||||
|
||||
ioc_info(ioc, "attempting host reset! scmd(%p)\n", scmd);
|
||||
ioc_info(ioc, "attempting host reset! scmd(0x%p)\n", scmd);
|
||||
scsi_print_command(scmd);
|
||||
|
||||
if (ioc->is_driver_loading || ioc->remove_host) {
|
||||
|
|
@ -3165,7 +3174,7 @@ scsih_host_reset(struct scsi_cmnd *scmd)
|
|||
retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
|
||||
r = (retval < 0) ? FAILED : SUCCESS;
|
||||
out:
|
||||
ioc_info(ioc, "host reset: %s scmd(%p)\n",
|
||||
ioc_info(ioc, "host reset: %s scmd(0x%p)\n",
|
||||
r == SUCCESS ? "SUCCESS" : "FAILED", scmd);
|
||||
|
||||
return r;
|
||||
|
|
@ -10870,7 +10879,7 @@ scsih_resume(struct pci_dev *pdev)
|
|||
r = mpt3sas_base_map_resources(ioc);
|
||||
if (r)
|
||||
return r;
|
||||
|
||||
ioc_info(ioc, "Issuing Hard Reset as part of OS Resume\n");
|
||||
mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
|
||||
scsi_unblock_requests(shost);
|
||||
mpt3sas_base_start_watchdog(ioc);
|
||||
|
|
@ -10939,6 +10948,7 @@ scsih_pci_slot_reset(struct pci_dev *pdev)
|
|||
if (rc)
|
||||
return PCI_ERS_RESULT_DISCONNECT;
|
||||
|
||||
ioc_info(ioc, "Issuing Hard Reset as part of PCI Slot Reset\n");
|
||||
rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
|
||||
|
||||
ioc_warn(ioc, "hard reset: %s\n",
|
||||
|
|
|
|||
|
|
@ -719,11 +719,10 @@ mpt3sas_transport_port_add(struct MPT3SAS_ADAPTER *ioc, u16 handle,
|
|||
sas_device_put(sas_device);
|
||||
}
|
||||
|
||||
if ((ioc->logging_level & MPT_DEBUG_TRANSPORT))
|
||||
dev_printk(KERN_INFO, &rphy->dev,
|
||||
"add: handle(0x%04x), sas_addr(0x%016llx)\n",
|
||||
handle, (unsigned long long)
|
||||
mpt3sas_port->remote_identify.sas_address);
|
||||
dev_info(&rphy->dev,
|
||||
"add: handle(0x%04x), sas_addr(0x%016llx)\n", handle,
|
||||
(unsigned long long)mpt3sas_port->remote_identify.sas_address);
|
||||
|
||||
mpt3sas_port->rphy = rphy;
|
||||
spin_lock_irqsave(&ioc->sas_node_lock, flags);
|
||||
list_add_tail(&mpt3sas_port->port_list, &sas_node->sas_port_list);
|
||||
|
|
@ -813,6 +812,8 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
|
|||
}
|
||||
if (!ioc->remove_host)
|
||||
sas_port_delete(mpt3sas_port->port);
|
||||
ioc_info(ioc, "%s: removed: sas_addr(0x%016llx)\n",
|
||||
__func__, (unsigned long long)sas_address);
|
||||
kfree(mpt3sas_port);
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue