rtc: abx80x: handle autocalibration
The autocalibration is separated in two bits to set in Oscillator Control register (0x1c) : - OSEL bit to select the oscillator type (XT or RC). - ACAL bit to select the autocalibration type. These functionnalities are exported in sysfs entries : "oscillator" and "autocalibration". Respectively, the values are "xtal" for XT oscillator and "rc" for RC oscillator and 0 to disable the autocalibration cycle, 512 for a 512 seconds autocalibration cycle and 1024 for a cycle of 1024 seconds. Examples : Set to XT Oscillator echo xtal > /sys/class/rtc/rtc0/device/oscillator Activate an autocalibration every 512 seconds echo 512 > /sys/class/rtc/rtc0/device/autocalibration Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Mylène Josserand
Alexandre Belloni
parent
85062c9b99
commit
59a8383adb
|
|
@ -49,7 +49,19 @@
|
|||
|
||||
#define ABX8XX_REG_CD_TIMER_CTL 0x18
|
||||
|
||||
#define ABX8XX_REG_OSC 0x1c
|
||||
#define ABX8XX_OSC_FOS BIT(3)
|
||||
#define ABX8XX_OSC_BOS BIT(4)
|
||||
#define ABX8XX_OSC_ACAL_512 BIT(5)
|
||||
#define ABX8XX_OSC_ACAL_1024 BIT(6)
|
||||
|
||||
#define ABX8XX_OSC_OSEL BIT(7)
|
||||
|
||||
#define ABX8XX_REG_OSS 0x1d
|
||||
#define ABX8XX_OSS_OMODE BIT(4)
|
||||
|
||||
#define ABX8XX_REG_CFG_KEY 0x1f
|
||||
#define ABX8XX_CFG_KEY_OSC 0xa1
|
||||
#define ABX8XX_CFG_KEY_MISC 0x9d
|
||||
|
||||
#define ABX8XX_REG_ID0 0x28
|
||||
|
|
@ -81,6 +93,20 @@ static struct abx80x_cap abx80x_caps[] = {
|
|||
[ABX80X] = {.pn = 0}
|
||||
};
|
||||
|
||||
static int abx80x_is_rc_mode(struct i2c_client *client)
|
||||
{
|
||||
int flags = 0;
|
||||
|
||||
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSS);
|
||||
if (flags < 0) {
|
||||
dev_err(&client->dev,
|
||||
"Failed to read autocalibration attribute\n");
|
||||
return flags;
|
||||
}
|
||||
|
||||
return (flags & ABX8XX_OSS_OMODE) ? 1 : 0;
|
||||
}
|
||||
|
||||
static int abx80x_enable_trickle_charger(struct i2c_client *client,
|
||||
u8 trickle_cfg)
|
||||
{
|
||||
|
|
@ -248,6 +274,174 @@ static int abx80x_set_alarm(struct device *dev, struct rtc_wkalrm *t)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int abx80x_rtc_set_autocalibration(struct device *dev,
|
||||
int autocalibration)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
int retval, flags = 0;
|
||||
|
||||
if ((autocalibration != 0) && (autocalibration != 1024) &&
|
||||
(autocalibration != 512)) {
|
||||
dev_err(dev, "autocalibration value outside permitted range\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
|
||||
if (flags < 0)
|
||||
return flags;
|
||||
|
||||
if (autocalibration == 0) {
|
||||
flags &= ~(ABX8XX_OSC_ACAL_512 | ABX8XX_OSC_ACAL_1024);
|
||||
} else if (autocalibration == 1024) {
|
||||
/* 1024 autocalibration is 0x10 */
|
||||
flags |= ABX8XX_OSC_ACAL_1024;
|
||||
flags &= ~(ABX8XX_OSC_ACAL_512);
|
||||
} else {
|
||||
/* 512 autocalibration is 0x11 */
|
||||
flags |= (ABX8XX_OSC_ACAL_1024 | ABX8XX_OSC_ACAL_512);
|
||||
}
|
||||
|
||||
/* Unlock write access to Oscillator Control Register */
|
||||
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
|
||||
ABX8XX_CFG_KEY_OSC);
|
||||
if (retval < 0) {
|
||||
dev_err(dev, "Failed to write CONFIG_KEY register\n");
|
||||
return retval;
|
||||
}
|
||||
|
||||
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static int abx80x_rtc_get_autocalibration(struct device *dev)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
int flags = 0, autocalibration;
|
||||
|
||||
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
|
||||
if (flags < 0)
|
||||
return flags;
|
||||
|
||||
if (flags & ABX8XX_OSC_ACAL_512)
|
||||
autocalibration = 512;
|
||||
else if (flags & ABX8XX_OSC_ACAL_1024)
|
||||
autocalibration = 1024;
|
||||
else
|
||||
autocalibration = 0;
|
||||
|
||||
return autocalibration;
|
||||
}
|
||||
|
||||
static ssize_t autocalibration_store(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
int retval;
|
||||
unsigned long autocalibration = 0;
|
||||
|
||||
retval = kstrtoul(buf, 10, &autocalibration);
|
||||
if (retval < 0) {
|
||||
dev_err(dev, "Failed to store RTC autocalibration attribute\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
retval = abx80x_rtc_set_autocalibration(dev, autocalibration);
|
||||
|
||||
return retval ? retval : count;
|
||||
}
|
||||
|
||||
static ssize_t autocalibration_show(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
int autocalibration = 0;
|
||||
|
||||
autocalibration = abx80x_rtc_get_autocalibration(dev);
|
||||
if (autocalibration < 0) {
|
||||
dev_err(dev, "Failed to read RTC autocalibration\n");
|
||||
sprintf(buf, "0\n");
|
||||
return autocalibration;
|
||||
}
|
||||
|
||||
return sprintf(buf, "%d\n", autocalibration);
|
||||
}
|
||||
|
||||
static DEVICE_ATTR_RW(autocalibration);
|
||||
|
||||
static ssize_t oscillator_store(struct device *dev,
|
||||
struct device_attribute *attr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
int retval, flags, rc_mode = 0;
|
||||
|
||||
if (strncmp(buf, "rc", 2) == 0) {
|
||||
rc_mode = 1;
|
||||
} else if (strncmp(buf, "xtal", 4) == 0) {
|
||||
rc_mode = 0;
|
||||
} else {
|
||||
dev_err(dev, "Oscillator selection value outside permitted ones\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
flags = i2c_smbus_read_byte_data(client, ABX8XX_REG_OSC);
|
||||
if (flags < 0)
|
||||
return flags;
|
||||
|
||||
if (rc_mode == 0)
|
||||
flags &= ~(ABX8XX_OSC_OSEL);
|
||||
else
|
||||
flags |= (ABX8XX_OSC_OSEL);
|
||||
|
||||
/* Unlock write access on Oscillator Control register */
|
||||
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_CFG_KEY,
|
||||
ABX8XX_CFG_KEY_OSC);
|
||||
if (retval < 0) {
|
||||
dev_err(dev, "Failed to write CONFIG_KEY register\n");
|
||||
return retval;
|
||||
}
|
||||
|
||||
retval = i2c_smbus_write_byte_data(client, ABX8XX_REG_OSC, flags);
|
||||
if (retval < 0) {
|
||||
dev_err(dev, "Failed to write Oscillator Control register\n");
|
||||
return retval;
|
||||
}
|
||||
|
||||
return retval ? retval : count;
|
||||
}
|
||||
|
||||
static ssize_t oscillator_show(struct device *dev,
|
||||
struct device_attribute *attr, char *buf)
|
||||
{
|
||||
int rc_mode = 0;
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
|
||||
rc_mode = abx80x_is_rc_mode(client);
|
||||
|
||||
if (rc_mode < 0) {
|
||||
dev_err(dev, "Failed to read RTC oscillator selection\n");
|
||||
sprintf(buf, "\n");
|
||||
return rc_mode;
|
||||
}
|
||||
|
||||
if (rc_mode)
|
||||
return sprintf(buf, "rc\n");
|
||||
else
|
||||
return sprintf(buf, "xtal\n");
|
||||
}
|
||||
|
||||
static DEVICE_ATTR_RW(oscillator);
|
||||
|
||||
static struct attribute *rtc_calib_attrs[] = {
|
||||
&dev_attr_autocalibration.attr,
|
||||
&dev_attr_oscillator.attr,
|
||||
NULL,
|
||||
};
|
||||
|
||||
static const struct attribute_group rtc_calib_attr_group = {
|
||||
.attrs = rtc_calib_attrs,
|
||||
};
|
||||
|
||||
static int abx80x_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
||||
{
|
||||
struct i2c_client *client = to_i2c_client(dev);
|
||||
|
|
@ -303,6 +497,13 @@ static int abx80x_dt_trickle_cfg(struct device_node *np)
|
|||
return (trickle_cfg | i);
|
||||
}
|
||||
|
||||
static void rtc_calib_remove_sysfs_group(void *_dev)
|
||||
{
|
||||
struct device *dev = _dev;
|
||||
|
||||
sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group);
|
||||
}
|
||||
|
||||
static int abx80x_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
|
|
@ -405,6 +606,24 @@ static int abx80x_probe(struct i2c_client *client,
|
|||
}
|
||||
}
|
||||
|
||||
/* Export sysfs entries */
|
||||
err = sysfs_create_group(&(&client->dev)->kobj, &rtc_calib_attr_group);
|
||||
if (err) {
|
||||
dev_err(&client->dev, "Failed to create sysfs group: %d\n",
|
||||
err);
|
||||
return err;
|
||||
}
|
||||
|
||||
err = devm_add_action(&client->dev, rtc_calib_remove_sysfs_group,
|
||||
&client->dev);
|
||||
if (err) {
|
||||
rtc_calib_remove_sysfs_group(&client->dev);
|
||||
dev_err(&client->dev,
|
||||
"Failed to add sysfs cleanup action: %d\n",
|
||||
err);
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue