diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index f9418e72900b..3e30a5250414 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -29,14 +29,20 @@
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/tca6416_keypad.h>
 #include <linux/usb/r8a66597.h>
 
 #include <video/sh_mobile_lcdc.h>
 
+#include <sound/sh_fsi.h>
+
 #include <mach/common.h>
 #include <mach/sh7372.h>
 
@@ -132,6 +138,21 @@
  * CN31 is used as Host in Linux.
  */
 
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
 /* MTD */
 static struct mtd_partition nor_flash_partitions[] = {
 	{
@@ -309,11 +330,138 @@ static struct platform_device usb1_host_device = {
 	.resource	= usb1_host_resources,
 };
 
+/* LED */
+static struct gpio_led mackerel_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= GPIO_PORT0,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led1",
+		.gpio		= GPIO_PORT1,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led2",
+		.gpio		= GPIO_PORT2,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led3",
+		.gpio		= GPIO_PORT159,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data mackerel_leds_pdata = {
+	.leds = mackerel_leds,
+	.num_leds = ARRAY_SIZE(mackerel_leds),
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &mackerel_leds_pdata,
+	},
+};
+
+/* FSI */
+#define IRQ_FSI evt2irq(0x1840)
+static struct sh_fsi_platform_info fsi_info = {
+	.porta_flags =	SH_FSI_BRS_INV		|
+			SH_FSI_OUT_SLAVE_MODE	|
+			SH_FSI_IN_SLAVE_MODE	|
+			SH_FSI_OFMT(PCM)	|
+			SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C0400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_FSI,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
+static struct platform_device fsi_ak4643_device = {
+	.name		= "sh_fsi2_a_ak4643",
+};
+
 static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
 	&usb1_host_device,
+	&leds_device,
+	&fsi_device,
+	&fsi_ak4643_device,
+};
+
+/* Keypad Initialization */
+#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
+{								\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+}
+
+#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
+
+static struct tca6416_button mackerel_gpio_keys[] = {
+	KEYPAD_BUTTON_LOW(KEY_HOME),
+	KEYPAD_BUTTON_LOW(KEY_MENU),
+	KEYPAD_BUTTON_LOW(KEY_BACK),
+	KEYPAD_BUTTON_LOW(KEY_POWER),
+};
+
+static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
+	.buttons	= mackerel_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(mackerel_gpio_keys),
+	.rep		= 1,
+	.use_polling	= 0,
+	.pinmask	= 0x000F,
+};
+
+/* I2C */
+#define IRQ9 evt2irq(0x0320)
+
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x13),
+	},
+	/* Keypad */
+	{
+		I2C_BOARD_INFO("tca6408-keys", 0x20),
+		.platform_data = &mackerel_tca6416_keys_info,
+		.irq = IRQ9,
+	},
+};
+
+#define IRQ21 evt2irq(0x32a0)
+
+static struct i2c_board_info i2c1_devices[] = {
+	/* Accelerometer */
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ21,
+	},
 };
 
 static struct map_desc mackerel_io_desc[] __initdata = {
@@ -337,6 +485,8 @@ static void __init mackerel_map_io(void)
 	shmobile_setup_console();
 }
 
+#define GPIO_PORT9CR	0xE6051009
+#define GPIO_PORT10CR	0xE605100A
 static void __init mackerel_init(void)
 {
 	sh7372_pinmux_init();
@@ -394,6 +544,33 @@ static void __init mackerel_init(void)
 	/* setup USB phy */
 	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
 
+	/* enable FSI2 port A (ak4643) */
+	gpio_request(GPIO_FN_FSIAIBT,	NULL);
+	gpio_request(GPIO_FN_FSIAILR,	NULL);
+	gpio_request(GPIO_FN_FSIAISLD,	NULL);
+	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	gpio_request(GPIO_PORT161,	NULL);
+	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+	gpio_request(GPIO_PORT9,  NULL);
+	gpio_request(GPIO_PORT10, NULL);
+	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
+
+	/* enable Keypad */
+	gpio_request(GPIO_FN_IRQ9_42,	NULL);
+	set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
+
+	/* enable Accelerometer */
+	gpio_request(GPIO_FN_IRQ21,	NULL);
+	set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
+
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
 
 	sh7372_add_standard_devices();
 
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index 81fd429c3c24..7c8b5179e444 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -23,37 +23,241 @@
 #include <mach/common.h>
 #include <asm/clkdev.h>
 
+#define FRQCRA		0xe6150000
+#define FRQCRB		0xe6150004
+#define FRQCRD		0xe61500e4
+#define VCLKCR1		0xe6150008
+#define VCLKCR2		0xe615000C
+#define VCLKCR3		0xe615001C
+#define ZBCKCR		0xe6150010
+#define FLCKCR		0xe6150014
+#define SD0CKCR		0xe6150074
+#define SD1CKCR		0xe6150078
+#define SD2CKCR		0xe615007C
+#define FSIACKCR	0xe6150018
+#define FSIBCKCR	0xe6150090
+#define SUBCKCR		0xe6150080
+#define SPUACKCR	0xe6150084
+#define SPUVCKCR	0xe6150094
+#define MSUCKCR		0xe6150088
+#define HSICKCR		0xe615008C
+#define MFCK1CR		0xe6150098
+#define MFCK2CR		0xe615009C
+#define DSITCKCR	0xe6150060
+#define DSI0PCKCR	0xe6150064
+#define DSI1PCKCR	0xe6150068
+#define DSI0PHYCR	0xe615006C
+#define DSI1PHYCR	0xe6150070
+#define PLLECR		0xe61500d0
+#define PLL0CR		0xe61500d8
+#define PLL1CR		0xe6150028
+#define PLL2CR		0xe615002c
+#define PLL3CR		0xe61500dc
 #define SMSTPCR0	0xe6150130
 #define SMSTPCR1	0xe6150134
 #define SMSTPCR2	0xe6150138
 #define SMSTPCR3	0xe615013c
 #define SMSTPCR4	0xe6150140
 #define SMSTPCR5	0xe6150144
+#define CKSCR		0xe61500c0
 
 /* Fixed 32 KHz root clock from EXTALR pin */
 static struct clk r_clk = {
 	.rate           = 32768,
 };
 
-/* Temporarily fixed 48 MHz SUB clock */
-static struct clk sub_clk = {
-	.rate           = 48000000,
+/*
+ * 26MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh73a0_extal1_clk = {
+	.rate		= 26000000,
 };
 
-/* Temporarily fixed 104 MHz HP clock */
-static struct clk hp_clk = {
-	.rate           = 104000000,
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh73a0_extal2_clk = {
+	.rate		= 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide extal1 by two */
+static struct clk extal1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh73a0_extal1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh73a0_extal2_clk,
+};
+
+static struct clk_ops main_clk_ops = {
+	.recalc		= followparent_recalc,
+};
+
+/* Main clock */
+static struct clk main_clk = {
+	.ops		= &main_clk_ops,
+};
+
+/* PLL0, PLL1, PLL2, PLL3 */
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLECR) & (1 << clk->enable_bit))
+		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll0_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL0CR,
+	.enable_bit	= 0,
+};
+
+static struct clk pll1_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL1CR,
+	.enable_bit	= 1,
+};
+
+static struct clk pll2_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL2CR,
+	.enable_bit	= 2,
+};
+
+static struct clk pll3_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL3CR,
+	.enable_bit	= 3,
+};
+
+/* Divide PLL1 by two */
+static struct clk pll1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pll1_clk,
 };
 
 static struct clk *main_clks[] = {
 	&r_clk,
-	&sub_clk,
-	&hp_clk,
+	&sh73a0_extal1_clk,
+	&sh73a0_extal2_clk,
+	&extal1_div2_clk,
+	&extal2_div2_clk,
+	&main_clk,
+	&pll0_clk,
+	&pll1_clk,
+	&pll2_clk,
+	&pll3_clk,
+	&pll1_div2_clk,
 };
 
-enum {	MSTP001,
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in FRQCRB to update hardware setting */
+	value = __raw_readl(FRQCRB);
+	value |= (1 << 31);
+	__raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 0, 36, 48 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
+	DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
+	[DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
+	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
+	[DIV4_Z] = DIV4(FRQCRB, 24, 0xbff, 0),
+	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xfff, 0),
+	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xfff, 0),
+	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xfff, 0),
+	[DIV4_HP] = DIV4(FRQCRB, 4, 0xfff, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
+	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
+	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
+	DIV6_SPUA, DIV6_SPUV, DIV6_MSU,
+	DIV6_HSI,  DIV6_MFG1, DIV6_MFG2,
+	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
+	DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0),
+	[DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0),
+	[DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0),
+	[DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0),
+	[DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+	[DIV6_SDHI2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
+	[DIV6_FSIA] = SH_CLK_DIV6(&pll1_div2_clk, FSIACKCR, 0),
+	[DIV6_FSIB] = SH_CLK_DIV6(&pll1_div2_clk, FSIBCKCR, 0),
+	[DIV6_SUB] = SH_CLK_DIV6(&sh73a0_extal2_clk, SUBCKCR, 0),
+	[DIV6_SPUA] = SH_CLK_DIV6(&pll1_div2_clk, SPUACKCR, 0),
+	[DIV6_SPUV] = SH_CLK_DIV6(&pll1_div2_clk, SPUVCKCR, 0),
+	[DIV6_MSU] = SH_CLK_DIV6(&pll1_div2_clk, MSUCKCR, 0),
+	[DIV6_HSI] = SH_CLK_DIV6(&pll1_div2_clk, HSICKCR, 0),
+	[DIV6_MFG1] = SH_CLK_DIV6(&pll1_div2_clk, MFCK1CR, 0),
+	[DIV6_MFG2] = SH_CLK_DIV6(&pll1_div2_clk, MFCK2CR, 0),
+	[DIV6_DSIT] = SH_CLK_DIV6(&pll1_div2_clk, DSITCKCR, 0),
+	[DIV6_DSI0P] = SH_CLK_DIV6(&pll1_div2_clk, DSI0PCKCR, 0),
+	[DIV6_DSI1P] = SH_CLK_DIV6(&pll1_div2_clk, DSI1PCKCR, 0),
+};
+
+enum { MSTP001,
 	MSTP116,
-	MSTP219, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+	MSTP219,
+	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 	MSTP331, MSTP329, MSTP323,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
@@ -62,27 +266,30 @@ enum {	MSTP001,
 	SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
 
 static struct clk mstp_clks[MSTP_NR] = {
-	[MSTP001] = MSTP(&hp_clk, SMSTPCR0, 1, 0), /* I2C2 */
-	[MSTP116] = MSTP(&hp_clk, SMSTPCR1, 16, 0), /* I2C0 */
-	[MSTP219] = MSTP(&sub_clk, SMSTPCR2, 19, 0), /* SCIFA7 */
-	[MSTP207] = MSTP(&sub_clk, SMSTPCR2, 7, 0), /* SCIFA5 */
-	[MSTP206] = MSTP(&sub_clk, SMSTPCR2, 6, 0), /* SCIFB */
-	[MSTP204] = MSTP(&sub_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
-	[MSTP203] = MSTP(&sub_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
-	[MSTP202] = MSTP(&sub_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
-	[MSTP201] = MSTP(&sub_clk, SMSTPCR2, 1, 0), /* SCIFA3 */
-	[MSTP200] = MSTP(&sub_clk, SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP331] = MSTP(&sub_clk, SMSTPCR3, 31, 0), /* SCIFA6 */
+	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
-	[MSTP323] = MSTP(&hp_clk, SMSTPCR3, 23, 0), /* I2C1 */
-	[MSTP411] = MSTP(&hp_clk, SMSTPCR4, 11, 0), /* I2C3 */
-	[MSTP410] = MSTP(&hp_clk, SMSTPCR4, 10, 0), /* I2C4 */
-	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* KEYSC0 */
+	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
+	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
 };
 
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
 #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
 
 static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("r_clk", &r_clk),
+
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
@@ -106,9 +313,31 @@ void __init sh73a0_clock_init(void)
 {
 	int k, ret = 0;
 
+	/* detect main clock parent */
+	switch ((__raw_readl(CKSCR) >> 24) & 0x03) {
+	case 0:
+		main_clk.parent = &sh73a0_extal1_clk;
+		break;
+	case 1:
+		main_clk.parent = &extal1_div2_clk;
+		break;
+	case 2:
+		main_clk.parent = &sh73a0_extal2_clk;
+		break;
+	case 3:
+		main_clk.parent = &extal2_div2_clk;
+		break;
+	}
+
 	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
 		ret = clk_register(main_clks[k]);
 
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index d8f91a5f692f..15932fd2435e 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -34,5 +34,7 @@ extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
 extern void sh73a0_pinmux_init(void);
+extern struct clk sh73a0_extal1_clk;
+extern struct clk sh73a0_extal2_clk;
 
 #endif /* __ARCH_MACH_COMMON_H */