[PATCH] v4l: 767: included support for em2800
- Included support for em2800. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
parent
2b5200a7b1
commit
596d92d512
|
@ -1,4 +1,9 @@
|
|||
0 -> Terratec Cinergy 250 USB [0ccd:0036]
|
||||
1 -> Pinnacle PCTV USB 2 [2304:0208]
|
||||
2 -> Hauppauge WinTV USB 2 [2040:4200]
|
||||
3 -> MSI VOX USB 2.0 [eb1a:2820]
|
||||
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
|
||||
1 -> Unknown EM2820/2840 video grabber (em2820/em2840) [eb1a:2820]
|
||||
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
|
||||
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
|
||||
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200]
|
||||
5 -> MSI VOX USB 2.0 (em2820/em2840)
|
||||
6 -> Terratec Cinergy 200 USB (em2800)
|
||||
7 -> Leadtek Winfast USB II (em2800)
|
||||
8 -> Kworld USB2800 (em2800)
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
em2820-cards.c - driver for Empia EM2820/2840 USB video capture devices
|
||||
em2820-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
||||
|
||||
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
|
||||
Ludovico Cavedon <cavedon@sssup.it>
|
||||
|
@ -35,14 +35,43 @@
|
|||
|
||||
#include "em2820.h"
|
||||
|
||||
enum em2820_board_entry {
|
||||
EM2820_BOARD_TERRATEC_CINERGY_250,
|
||||
EM2820_BOARD_PINNACLE_USB_2,
|
||||
EM2820_BOARD_HAUPPAUGE_WINTV_USB_2,
|
||||
EM2820_BOARD_MSI_VOX_USB_2
|
||||
};
|
||||
|
||||
struct em2820_board em2820_boards[] = {
|
||||
[EM2800_BOARD_UNKNOWN] = {
|
||||
.name = "Unknown EM2800 video grabber",
|
||||
.is_em2800 = 1,
|
||||
.vchannels = 2,
|
||||
.norm = VIDEO_MODE_PAL,
|
||||
.tda9887_conf = TDA9887_PRESENT,
|
||||
.has_tuner = 1,
|
||||
.decoder = EM2820_SAA7113,
|
||||
.input = {{
|
||||
.type = EM2820_VMUX_COMPOSITE1,
|
||||
.vmux = 0,
|
||||
.amux = 1,
|
||||
},{
|
||||
.type = EM2820_VMUX_SVIDEO,
|
||||
.vmux = 9,
|
||||
.amux = 1,
|
||||
}},
|
||||
},
|
||||
[EM2820_BOARD_UNKNOWN] = {
|
||||
.name = "Unknown EM2820/2840 video grabber",
|
||||
.is_em2800 = 0,
|
||||
.vchannels = 2,
|
||||
.norm = VIDEO_MODE_PAL,
|
||||
.tda9887_conf = TDA9887_PRESENT,
|
||||
.has_tuner = 1,
|
||||
.decoder = EM2820_SAA7113,
|
||||
.input = {{
|
||||
.type = EM2820_VMUX_COMPOSITE1,
|
||||
.vmux = 0,
|
||||
.amux = 1,
|
||||
},{
|
||||
.type = EM2820_VMUX_SVIDEO,
|
||||
.vmux = 9,
|
||||
.amux = 1,
|
||||
}},
|
||||
},
|
||||
[EM2820_BOARD_TERRATEC_CINERGY_250] = {
|
||||
.name = "Terratec Cinergy 250 USB",
|
||||
.vchannels = 3,
|
||||
|
@ -129,17 +158,88 @@ struct em2820_board em2820_boards[] = {
|
|||
.amux = 1,
|
||||
}},
|
||||
},
|
||||
{ } /* Terminating entry */
|
||||
[EM2800_BOARD_TERRATEC_CINERGY_200] = {
|
||||
.name = "Terratec Cinergy 200 USB",
|
||||
.chip_id = 0x4,
|
||||
.is_em2800 = 1,
|
||||
.vchannels = 3,
|
||||
.norm = VIDEO_MODE_PAL,
|
||||
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
|
||||
.tda9887_conf = TDA9887_PRESENT,
|
||||
.has_tuner = 1,
|
||||
.decoder = EM2820_SAA7113,
|
||||
.input = {{
|
||||
.type = EM2820_VMUX_TELEVISION,
|
||||
.vmux = 2,
|
||||
.amux = 0,
|
||||
},{
|
||||
.type = EM2820_VMUX_COMPOSITE1,
|
||||
.vmux = 0,
|
||||
.amux = 1,
|
||||
},{
|
||||
.type = EM2820_VMUX_SVIDEO,
|
||||
.vmux = 9,
|
||||
.amux = 1,
|
||||
}},
|
||||
},
|
||||
[EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
|
||||
.name = "Leadtek Winfast USB II",
|
||||
.chip_id = 0x2,
|
||||
.is_em2800 = 1,
|
||||
.vchannels = 3,
|
||||
.norm = VIDEO_MODE_PAL,
|
||||
.tuner_type = TUNER_LG_PAL_NEW_TAPC,
|
||||
.tda9887_conf = TDA9887_PRESENT,
|
||||
.has_tuner = 1,
|
||||
.decoder = EM2820_SAA7113,
|
||||
.input = {{
|
||||
.type = EM2820_VMUX_TELEVISION,
|
||||
.vmux = 2,
|
||||
.amux = 0,
|
||||
},{
|
||||
.type = EM2820_VMUX_COMPOSITE1,
|
||||
.vmux = 0,
|
||||
.amux = 1,
|
||||
},{
|
||||
.type = EM2820_VMUX_SVIDEO,
|
||||
.vmux = 9,
|
||||
.amux = 1,
|
||||
}},
|
||||
},
|
||||
[EM2800_BOARD_KWORLD_USB2800] = {
|
||||
.name = "Kworld USB2800",
|
||||
.chip_id = 0x7,
|
||||
.is_em2800 = 1,
|
||||
.vchannels = 3,
|
||||
.norm = VIDEO_MODE_PAL,
|
||||
.tuner_type = TUNER_PHILIPS_ATSC,
|
||||
.tda9887_conf = TDA9887_PRESENT,
|
||||
.has_tuner = 1,
|
||||
.decoder = EM2820_SAA7113,
|
||||
.input = {{
|
||||
.type = EM2820_VMUX_TELEVISION,
|
||||
.vmux = 2,
|
||||
.amux = 0,
|
||||
},{
|
||||
.type = EM2820_VMUX_COMPOSITE1,
|
||||
.vmux = 0,
|
||||
.amux = 1,
|
||||
},{
|
||||
.type = EM2820_VMUX_SVIDEO,
|
||||
.vmux = 9,
|
||||
.amux = 1,
|
||||
}},
|
||||
},
|
||||
};
|
||||
const unsigned int em2820_bcount = ARRAY_SIZE(em2820_boards);
|
||||
|
||||
/* table of devices that work with this driver */
|
||||
struct usb_device_id em2820_id_table [] = {
|
||||
/* Terratec Cinerhy 200 USB: em2800 nor supported, at the moment */
|
||||
/* { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_TERRATEC_CINERGY_200 }, */
|
||||
{ USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_UNKNOWN },
|
||||
{ USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_UNKNOWN },
|
||||
{ USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
|
||||
{ USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
|
||||
{ USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
|
||||
{ USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_MSI_VOX_USB_2 },
|
||||
{ },
|
||||
};
|
||||
|
||||
|
@ -163,6 +263,7 @@ void em2820_card_setup(struct em2820 *dev)
|
|||
}
|
||||
|
||||
EXPORT_SYMBOL(em2820_boards);
|
||||
EXPORT_SYMBOL(em2820_bcount);
|
||||
EXPORT_SYMBOL(em2820_id_table);
|
||||
|
||||
MODULE_DEVICE_TABLE (usb, em2820_id_table);
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
em2820-core.c - driver for Empia EM2820/2840 USB video capture devices
|
||||
em2820-core.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
||||
|
||||
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
|
||||
Ludovico Cavedon <cavedon@sssup.it>
|
||||
|
@ -562,6 +562,11 @@ static inline void em2820_isoc_video_copy(struct em2820 *dev,
|
|||
void *fieldstart, *startwrite, *startread;
|
||||
int linesdone, currlinedone, offset, lencopy,remain;
|
||||
|
||||
if(dev->frame_size != (*f)->buf.length){
|
||||
em2820_err("frame_size %i and buf.length %i are different!!!\n",dev->frame_size,(*f)->buf.length);
|
||||
return;
|
||||
}
|
||||
|
||||
if ((*f)->fieldbytesused + len > dev->field_size)
|
||||
len =dev->field_size - (*f)->fieldbytesused;
|
||||
remain = len;
|
||||
|
@ -780,6 +785,11 @@ int em2820_set_alternate(struct em2820 *dev)
|
|||
dev->alt = alt;
|
||||
if (dev->alt == 0) {
|
||||
int i;
|
||||
if(dev->is_em2800){ /* always use the max packet size for em2800 based devices */
|
||||
for(i=0;i< EM2820_MAX_ALT; i++)
|
||||
if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->alt])
|
||||
dev->alt=i;
|
||||
}else{
|
||||
unsigned int min_pkt_size = dev->field_size / 137; /* FIXME: empiric magic number */
|
||||
em2820_coredbg("minimum isoc packet size: %u", min_pkt_size);
|
||||
dev->alt = 7;
|
||||
|
@ -788,6 +798,7 @@ int em2820_set_alternate(struct em2820 *dev)
|
|||
dev->alt = i;
|
||||
break;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (dev->alt != prev_alt) {
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
em2820-i2c.c - driver for Empia EM2820/2840 USB video capture devices
|
||||
em2820-i2c.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
||||
|
||||
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
|
||||
Ludovico Cavedon <cavedon@sssup.it>
|
||||
|
@ -29,11 +29,6 @@
|
|||
#include <media/tuner.h>
|
||||
#include <linux/video_decoder.h>
|
||||
|
||||
/* To be moved to compat.h */
|
||||
#if !defined(I2C_HW_B_EM2820)
|
||||
#define I2C_HW_B_EM2820 0x99
|
||||
#endif
|
||||
|
||||
#include "em2820.h"
|
||||
|
||||
/* ----------------------------------------------------------- */
|
||||
|
@ -56,11 +51,132 @@ MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
|
|||
printk(fmt , ##args); } while (0)
|
||||
|
||||
/*
|
||||
* i2c_send_bytes()
|
||||
* em2800_i2c_send_max4()
|
||||
* send up to 4 bytes to the i2c device
|
||||
*/
|
||||
static int em2800_i2c_send_max4(struct em2820 *dev, unsigned char addr,
|
||||
char *buf, int len)
|
||||
{
|
||||
int ret;
|
||||
int write_timeout;
|
||||
unsigned char b2[6];
|
||||
BUG_ON(len < 1 || len > 4);
|
||||
b2[5] = 0x80 + len - 1;
|
||||
b2[4] = addr;
|
||||
b2[3] = buf[0];
|
||||
if (len > 1)
|
||||
b2[2] = buf[1];
|
||||
if (len > 2)
|
||||
b2[1] = buf[2];
|
||||
if (len > 3)
|
||||
b2[0] = buf[3];
|
||||
|
||||
ret = dev->em2820_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
|
||||
if (ret != 2 + len) {
|
||||
em2820_warn("writting to i2c device failed (error=%i)\n", ret);
|
||||
return -EIO;
|
||||
}
|
||||
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
|
||||
write_timeout -= 5) {
|
||||
ret = dev->em2820_read_reg(dev, 0x05);
|
||||
if (ret == 0x80 + len - 1)
|
||||
return len;
|
||||
mdelay(5);
|
||||
}
|
||||
em2820_warn("i2c write timed out\n");
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
/*
|
||||
* em2800_i2c_send_bytes()
|
||||
*/
|
||||
static int em2800_i2c_send_bytes(void *data, unsigned char addr, char *buf,
|
||||
short len)
|
||||
{
|
||||
char *bufPtr = buf;
|
||||
int ret;
|
||||
int wrcount = 0;
|
||||
int count;
|
||||
int maxLen = 4;
|
||||
struct em2820 *dev = (struct em2820 *)data;
|
||||
while (len > 0) {
|
||||
count = (len > maxLen) ? maxLen : len;
|
||||
ret = em2800_i2c_send_max4(dev, addr, bufPtr, count);
|
||||
if (ret > 0) {
|
||||
len -= count;
|
||||
bufPtr += count;
|
||||
wrcount += count;
|
||||
} else
|
||||
return (ret < 0) ? ret : -EFAULT;
|
||||
}
|
||||
return wrcount;
|
||||
}
|
||||
|
||||
/*
|
||||
* em2800_i2c_check_for_device()
|
||||
* check if there is a i2c_device at the supplied address
|
||||
*/
|
||||
static int em2800_i2c_check_for_device(struct em2820 *dev, unsigned char addr)
|
||||
{
|
||||
char msg;
|
||||
int ret;
|
||||
int write_timeout;
|
||||
msg = addr;
|
||||
ret = dev->em2820_write_regs(dev, 0x04, &msg, 1);
|
||||
if (ret < 0) {
|
||||
em2820_warn("setting i2c device address failed (error=%i)\n",
|
||||
ret);
|
||||
return ret;
|
||||
}
|
||||
msg = 0x84;
|
||||
ret = dev->em2820_write_regs(dev, 0x05, &msg, 1);
|
||||
if (ret < 0) {
|
||||
em2820_warn("preparing i2c read failed (error=%i)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
|
||||
write_timeout -= 5) {
|
||||
unsigned msg = dev->em2820_read_reg(dev, 0x5);
|
||||
if (msg == 0x94)
|
||||
return -ENODEV;
|
||||
else if (msg == 0x84)
|
||||
return 0;
|
||||
mdelay(5);
|
||||
}
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/*
|
||||
* em2800_i2c_recv_bytes()
|
||||
* read from the i2c device
|
||||
*/
|
||||
static int em2800_i2c_recv_bytes(struct em2820 *dev, unsigned char addr,
|
||||
char *buf, int len)
|
||||
{
|
||||
int ret;
|
||||
/* check for the device and set i2c read address */
|
||||
ret = em2800_i2c_check_for_device(dev, addr);
|
||||
if (ret) {
|
||||
em2820_warn
|
||||
("preparing read at i2c address 0x%x failed (error=%i)\n",
|
||||
addr, ret);
|
||||
return ret;
|
||||
}
|
||||
ret = dev->em2820_read_reg_req_len(dev, 0x0, 0x3, buf, len);
|
||||
if (ret < 0) {
|
||||
em2820_warn("reading from i2c device at 0x%x failed (error=%i)",
|
||||
addr, ret);
|
||||
return ret;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* em2820_i2c_send_bytes()
|
||||
* untested for more than 4 bytes
|
||||
*/
|
||||
static int i2c_send_bytes(void *data, unsigned char addr, char *buf, short len,
|
||||
int stop)
|
||||
static int em2820_i2c_send_bytes(void *data, unsigned char addr, char *buf,
|
||||
short len, int stop)
|
||||
{
|
||||
int wrcount = 0;
|
||||
struct em2820 *dev = (struct em2820 *)data;
|
||||
|
@ -71,11 +187,11 @@ static int i2c_send_bytes(void *data, unsigned char addr, char *buf, short len,
|
|||
}
|
||||
|
||||
/*
|
||||
* i2c_recv_byte()
|
||||
* em2820_i2c_recv_bytes()
|
||||
* read a byte from the i2c device
|
||||
*/
|
||||
static int i2c_recv_bytes(struct em2820 *dev, unsigned char addr, char *buf,
|
||||
int len)
|
||||
static int em2820_i2c_recv_bytes(struct em2820 *dev, unsigned char addr,
|
||||
char *buf, int len)
|
||||
{
|
||||
int ret;
|
||||
ret = dev->em2820_read_reg_req_len(dev, 2, addr, buf, len);
|
||||
|
@ -89,10 +205,10 @@ static int i2c_recv_bytes(struct em2820 *dev, unsigned char addr, char *buf,
|
|||
}
|
||||
|
||||
/*
|
||||
* i2c_check_for_device()
|
||||
* em2820_i2c_check_for_device()
|
||||
* check if there is a i2c_device at the supplied address
|
||||
*/
|
||||
static int i2c_check_for_device(struct em2820 *dev, unsigned char addr)
|
||||
static int em2820_i2c_check_for_device(struct em2820 *dev, unsigned char addr)
|
||||
{
|
||||
char msg;
|
||||
int ret;
|
||||
|
@ -126,18 +242,25 @@ static int em2820_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|||
(msgs[i].flags & I2C_M_RD) ? "read" : "write",
|
||||
i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
|
||||
if (!msgs[i].len) { /* no len: check only for device presence */
|
||||
rc = i2c_check_for_device(dev, addr);
|
||||
if (dev->is_em2800)
|
||||
rc = em2800_i2c_check_for_device(dev, addr);
|
||||
else
|
||||
rc = em2820_i2c_check_for_device(dev, addr);
|
||||
if (rc < 0) {
|
||||
dprintk2(" no device\n");
|
||||
return rc;
|
||||
}
|
||||
|
||||
}
|
||||
if (msgs[i].flags & I2C_M_RD) {
|
||||
} else if (msgs[i].flags & I2C_M_RD) {
|
||||
/* read bytes */
|
||||
|
||||
rc = i2c_recv_bytes(dev, addr, msgs[i].buf,
|
||||
msgs[i].len);
|
||||
if (dev->is_em2800)
|
||||
rc = em2800_i2c_recv_bytes(dev, addr,
|
||||
msgs[i].buf,
|
||||
msgs[i].len);
|
||||
else
|
||||
rc = em2820_i2c_recv_bytes(dev, addr,
|
||||
msgs[i].buf,
|
||||
msgs[i].len);
|
||||
if (i2c_debug) {
|
||||
for (byte = 0; byte < msgs[i].len; byte++) {
|
||||
printk(" %02x", msgs[i].buf[byte]);
|
||||
|
@ -149,8 +272,15 @@ static int em2820_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|||
for (byte = 0; byte < msgs[i].len; byte++)
|
||||
printk(" %02x", msgs[i].buf[byte]);
|
||||
}
|
||||
rc = i2c_send_bytes(dev, addr, msgs[i].buf, msgs[i].len,
|
||||
i == num - 1);
|
||||
if (dev->is_em2800)
|
||||
rc = em2800_i2c_send_bytes(dev, addr,
|
||||
msgs[i].buf,
|
||||
msgs[i].len);
|
||||
else
|
||||
rc = em2820_i2c_send_bytes(dev, addr,
|
||||
msgs[i].buf,
|
||||
msgs[i].len,
|
||||
i == num - 1);
|
||||
if (rc < 0)
|
||||
goto err;
|
||||
}
|
||||
|
@ -171,6 +301,12 @@ static int em2820_i2c_eeprom(struct em2820 *dev, unsigned char *eedata, int len)
|
|||
int i, err, size = len, block;
|
||||
|
||||
dev->i2c_client.addr = 0xa0 >> 1;
|
||||
|
||||
/* Check if board has eeprom */
|
||||
err = i2c_master_recv(&dev->i2c_client, &buf, 0);
|
||||
if (err < 0)
|
||||
return -1;
|
||||
|
||||
buf = 0;
|
||||
if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) {
|
||||
printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
|
||||
|
@ -389,7 +525,7 @@ static void do_i2c_scan(char *name, struct i2c_client *c)
|
|||
rc = i2c_master_recv(c, &buf, 0);
|
||||
if (rc < 0)
|
||||
continue;
|
||||
printk(KERN_INFO "%s: found device @ 0x%x [%s]", name,
|
||||
printk(KERN_INFO "%s: found i2c device @ 0x%x [%s]\n", name,
|
||||
i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
|
||||
}
|
||||
}
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
em2820-video.c - driver for Empia EM2820/2840 USB video capture devices
|
||||
em2820-video.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
||||
|
||||
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
|
||||
Ludovico Cavedon <cavedon@sssup.it>
|
||||
|
@ -50,6 +50,11 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
|
|||
MODULE_DESCRIPTION(DRIVER_DESC);
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
static unsigned int card[] = {[0 ... (EM2820_MAXBOARDS - 1)] = UNSET };
|
||||
|
||||
module_param_array(card, int, NULL, 0444);
|
||||
MODULE_PARM_DESC(card,"card type");
|
||||
|
||||
static int tuner = -1;
|
||||
module_param(tuner, int, 0444);
|
||||
MODULE_PARM_DESC(tuner, "tuner type");
|
||||
|
@ -1081,7 +1086,7 @@ static int em2820_do_ioctl(struct inode *inode, struct file *filp,
|
|||
struct v4l2_cropcap *cc = arg;
|
||||
|
||||
if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
|
||||
return EINVAL;
|
||||
return -EINVAL;
|
||||
cc->bounds.left = 0;
|
||||
cc->bounds.top = 0;
|
||||
cc->bounds.width = dev->width;
|
||||
|
@ -1520,21 +1525,12 @@ static struct file_operations em2820_v4l_fops = {
|
|||
static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
|
||||
int minor, int model)
|
||||
{
|
||||
struct em2820 *dev;
|
||||
struct em2820 *dev = *devhandle;
|
||||
int retval = -ENOMEM;
|
||||
int errCode, i;
|
||||
unsigned int maxh, maxw;
|
||||
struct usb_interface *uif;
|
||||
|
||||
/* allocate memory for our device state and initialize it */
|
||||
dev = kmalloc(sizeof(*dev), GFP_KERNEL);
|
||||
if (dev == NULL) {
|
||||
em2820_err(DRIVER_NAME ": out of memory!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
memset(dev, 0x00, sizeof(*dev));
|
||||
|
||||
snprintf(dev->name, 29, "em2820 #%d", minor);
|
||||
dev->udev = udev;
|
||||
dev->model = model;
|
||||
init_MUTEX(&dev->lock);
|
||||
|
@ -1545,6 +1541,7 @@ static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
|
|||
dev->em2820_read_reg_req_len = em2820_read_reg_req_len;
|
||||
dev->em2820_write_regs_req = em2820_write_regs_req;
|
||||
dev->em2820_read_reg_req = em2820_read_reg_req;
|
||||
dev->is_em2800 = em2820_boards[model].is_em2800;
|
||||
dev->has_tuner = em2820_boards[model].has_tuner;
|
||||
dev->has_msp34xx = em2820_boards[model].has_msp34xx;
|
||||
dev->tda9887_conf = em2820_boards[model].tda9887_conf;
|
||||
|
@ -1595,7 +1592,7 @@ static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
|
|||
/* compute alternate max packet sizes */
|
||||
uif = dev->udev->actconfig->interface[0];
|
||||
dev->alt_max_pkt_size[0] = 0;
|
||||
for (i = 1; i <= EM2820_MAX_ALT; i++) {
|
||||
for (i = 1; i <= EM2820_MAX_ALT && i < uif->num_altsetting ; i++) {
|
||||
u16 tmp =
|
||||
le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
|
||||
wMaxPacketSize);
|
||||
|
@ -1688,7 +1685,6 @@ static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
|
|||
em2820_info("V4L2 device registered as /dev/video%d\n",
|
||||
dev->vdev->minor);
|
||||
|
||||
*devhandle = dev;
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -1703,27 +1699,68 @@ static int em2820_usb_probe(struct usb_interface *interface,
|
|||
struct usb_device *udev;
|
||||
struct em2820 *dev = NULL;
|
||||
int retval = -ENODEV;
|
||||
int model,i,nr;
|
||||
|
||||
udev = usb_get_dev(interface_to_usbdev(interface));
|
||||
endpoint = &interface->cur_altsetting->endpoint[1].desc;
|
||||
|
||||
/* Don't register audio interfaces */
|
||||
if (interface->altsetting[1].desc.bInterfaceClass == USB_CLASS_AUDIO)
|
||||
return -ENODEV;
|
||||
|
||||
/* check if the the device has the iso in endpoint at the correct place */
|
||||
if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
|
||||
USB_ENDPOINT_XFER_ISOC) {
|
||||
/* em2820_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); */
|
||||
em2820_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
|
||||
/* em2820_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n"); */
|
||||
em2820_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
model=id->driver_info;
|
||||
nr=interface->minor;
|
||||
|
||||
if (nr>EM2820_MAXBOARDS) {
|
||||
printk ("em2820: Supports only %i em28xx boards.\n",EM2820_MAXBOARDS);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
/* allocate memory for our device state and initialize it */
|
||||
dev = kmalloc(sizeof(*dev), GFP_KERNEL);
|
||||
if (dev == NULL) {
|
||||
em2820_err(DRIVER_NAME ": out of memory!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
memset(dev, 0, sizeof(*dev));
|
||||
|
||||
snprintf(dev->name, 29, "em2820 #%d", nr);
|
||||
|
||||
if ((card[nr]>=0)&&(card[nr]<em2820_bcount))
|
||||
model=card[nr];
|
||||
|
||||
if ((model==EM2800_BOARD_UNKNOWN)||(model==EM2820_BOARD_UNKNOWN)) {
|
||||
printk( "%s: Your board has no eeprom inside it and thus can't\n"
|
||||
"%s: be autodetected. Please pass card=<n> insmod option to\n"
|
||||
"%s: workaround that. Redirect complaints to the vendor of\n"
|
||||
"%s: the TV card. Best regards,\n"
|
||||
"%s: -- tux\n",
|
||||
dev->name,dev->name,dev->name,dev->name,dev->name);
|
||||
printk("%s: Here is a list of valid choices for the card=<n> insmod option:\n",
|
||||
dev->name);
|
||||
for (i = 0; i < em2820_bcount; i++) {
|
||||
printk("%s: card=%d -> %s\n",
|
||||
dev->name, i, em2820_boards[i].name);
|
||||
}
|
||||
}
|
||||
|
||||
/* allocate device struct */
|
||||
retval = em2820_init_dev(&dev, udev, interface->minor, id->driver_info);
|
||||
retval = em2820_init_dev(&dev, udev, nr, model);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
em2820_info("Found %s\n", em2820_boards[id->driver_info].name);
|
||||
em2820_info("Found %s\n", em2820_boards[model].name);
|
||||
|
||||
/* save our data pointer in this interface device */
|
||||
usb_set_intfdata(interface, dev);
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
em2820-cards.c - driver for Empia EM2820/2840 USB video capture devices
|
||||
em2820-cards.c - driver for Empia EM2800/EM2820/2840 USB video capture devices
|
||||
|
||||
Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
|
||||
Ludovico Cavedon <cavedon@sssup.it>
|
||||
|
@ -28,6 +28,23 @@
|
|||
#include <linux/videodev.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
/* Boards supported by driver */
|
||||
|
||||
#define EM2800_BOARD_UNKNOWN 0
|
||||
#define EM2820_BOARD_UNKNOWN 1
|
||||
#define EM2820_BOARD_TERRATEC_CINERGY_250 2
|
||||
#define EM2820_BOARD_PINNACLE_USB_2 3
|
||||
#define EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 4
|
||||
#define EM2820_BOARD_MSI_VOX_USB_2 5
|
||||
#define EM2800_BOARD_TERRATEC_CINERGY_200 6
|
||||
#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
|
||||
#define EM2800_BOARD_KWORLD_USB2800 8
|
||||
|
||||
#define UNSET -1
|
||||
|
||||
/* maximum number of em28xx boards */
|
||||
#define EM2820_MAXBOARDS 1 /*FIXME: should be bigger */
|
||||
|
||||
/* maximum number of frames that can be queued */
|
||||
#define EM2820_NUM_FRAMES 5
|
||||
/* number of frames that get used for v4l2_read() */
|
||||
|
@ -79,6 +96,9 @@
|
|||
/* time to wait when stopping the isoc transfer */
|
||||
#define EM2820_URB_TIMEOUT msecs_to_jiffies(EM2820_NUM_BUFS * EM2820_NUM_PACKETS)
|
||||
|
||||
/* time in msecs to wait for i2c writes to finish */
|
||||
#define EM2800_I2C_WRITE_TIMEOUT 20
|
||||
|
||||
/* the various frame states */
|
||||
enum em2820_frame_state {
|
||||
F_UNUSED = 0,
|
||||
|
@ -145,12 +165,13 @@ enum em2820_decoder {
|
|||
|
||||
struct em2820_board {
|
||||
char *name;
|
||||
|
||||
unsigned char chip_id;
|
||||
int vchannels;
|
||||
int norm;
|
||||
int tuner_type;
|
||||
|
||||
/* i2c flags */
|
||||
unsigned int is_em2800;
|
||||
unsigned int tda9887_conf;
|
||||
|
||||
unsigned int has_tuner:1;
|
||||
|
@ -195,6 +216,7 @@ struct em2820 {
|
|||
/* generic device properties */
|
||||
char name[30]; /* name (including minor) of the device */
|
||||
int model; /* index in the device_data struct */
|
||||
unsigned int is_em2800;
|
||||
int video_inputs; /* number of video inputs */
|
||||
unsigned int has_tuner:1;
|
||||
unsigned int has_msp34xx:1;
|
||||
|
@ -304,11 +326,14 @@ void em2820_uninit_isoc(struct em2820 *dev);
|
|||
int em2820_set_alternate(struct em2820 *dev);
|
||||
|
||||
/* Provided by em2820-cards.c */
|
||||
extern int em2800_variant_detect(struct usb_device* udev,int model);
|
||||
extern void em2820_card_setup(struct em2820 *dev);
|
||||
extern struct em2820_board em2820_boards[];
|
||||
extern struct usb_device_id em2820_id_table[];
|
||||
extern const unsigned int em2820_bcount;
|
||||
|
||||
/* em2820 registers */
|
||||
#define CHIPID_REG 0x0a
|
||||
#define USBSUSP_REG 0x0c /* */
|
||||
|
||||
#define AUDIOSRC_REG 0x0e
|
||||
|
|
Loading…
Reference in New Issue