hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

spelling: s/appropiate/appropriate/ 

Signed-off-by: Adrian Bunk <bunk@stusta.de>
This commit is contained in:
Adrian Bunk 2006-01-15 02:00:17 +01:00 committed by Adrian Bunk
parent a8e82ef97a
commit 575c968718
8 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/cachetlb.txt
View File

@ -136,7 +136,7 @@ changes occur:
8) void lazy_mmu_prot_update(pte_t pte)
This interface is called whenever the protection on
any user PTEs change. This interface provides a notification
to architecture specific code to take appropiate action.
to architecture specific code to take appropriate action.
Next, we have the cache flushing interfaces. In general, when Linux

2
Documentation/ioctl/hdio.txt
View File

@ -946,7 +946,7 @@ HDIO_SCAN_HWIF register and (re)scan interface
This ioctl initializes the addresses and irq for a disk
controller, probes for drives, and creates /proc/ide
interfaces as appropiate.
interfaces as appropriate.

2
Documentation/laptop-mode.txt
View File

@ -357,7 +357,7 @@ MAX_AGE=${MAX_AGE:-'600'}
# Read-ahead, in kilobytes
READAHEAD=${READAHEAD:-'4096'}
# Shall we remount journaled fs. with appropiate commit interval? (1=yes)
# Shall we remount journaled fs. with appropriate commit interval? (1=yes)
DO_REMOUNTS=${DO_REMOUNTS:-'1'}
# And shall we add the "noatime" option to that as well? (1=yes)

2
Documentation/networking/sk98lin.txt
View File

@ -91,7 +91,7 @@ To use the driver as a module, proceed as follows:
with (M)
5. Execute the command "make modules".
6. Execute the command "make modules_install".
The appropiate modules will be installed.
The appropriate modules will be installed.
7. Reboot your system.

2
Documentation/x86_64/boot-options.txt
View File

@ -198,6 +198,6 @@ Debugging
Misc
noreplacement Don't replace instructions with more appropiate ones
noreplacement Don't replace instructions with more appropriate ones
for the CPU. This may be useful on asymmetric MP systems
where some CPU have less capabilities than the others.

2
drivers/s390/scsi/zfcp_erp.c
View File

@ -3403,7 +3403,7 @@ zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action)
/**
* zfcp_erp_action_cleanup
*
* Register unit with scsi stack if appropiate and fix reference counts.
* Register unit with scsi stack if appropriate and fix reference counts.
* Note: Temporary units are not registered with scsi stack.
*/
static void

2
drivers/scsi/gdth.c
View File

@ -328,7 +328,7 @@
* hdr_channel:x x - number of virtual bus for host drives
* shared_access:Y disable driver reserve/release protocol to
* access a shared resource from several nodes,
* appropiate controller firmware required
* appropriate controller firmware required
* shared_access:N enable driver reserve/release protocol
* probe_eisa_isa:Y scan for EISA/ISA controllers
* probe_eisa_isa:N do not scan for EISA/ISA controllers

2
sound/oss/opl3sa2.c
View File

@ -530,7 +530,7 @@ static void __init attach_opl3sa2_mss(struct address_info* hw_config, struct res
if (hw_config->slots[0] != -1) {
/* Did the MSS driver install? */
if(num_mixers == (initial_mixers + 1)) {
/* The MSS mixer is installed, reroute mixers appropiately */
/* The MSS mixer is installed, reroute mixers appropriately */
AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_CD);
AD1848_REROUTE(SOUND_MIXER_LINE2, SOUND_MIXER_SYNTH);
AD1848_REROUTE(SOUND_MIXER_LINE3, SOUND_MIXER_LINE);