diff --git a/MAINTAINERS b/MAINTAINERS index 331f6af61731..e2463baf33e5 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8977,9 +8977,11 @@ F: drivers/of/resolver.c OPENRISC ARCHITECTURE M: Jonas Bonn -W: http://openrisc.net +M: Stefan Kristiansson +M: Stafford Horne +L: openrisc@lists.librecores.org +W: http://openrisc.io S: Maintained -T: git git://openrisc.net/~jonas/linux F: arch/openrisc/ OPENVSWITCH diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 489e7f909286..8d22015fde3e 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -26,6 +26,7 @@ config OPENRISC select HAVE_DEBUG_STACKOVERFLOW select OR1K_PIC select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1 + select NO_BOOTMEM config MMU def_bool y @@ -98,6 +99,9 @@ config OPENRISC_HAVE_INST_DIV Select this if your implementation has a hardware divide instruction endmenu +config NR_CPUS + int + default "1" source kernel/Kconfig.hz source kernel/Kconfig.preempt diff --git a/arch/openrisc/README.openrisc b/arch/openrisc/README.openrisc index c9f7edf2b9a2..072069ab5100 100644 --- a/arch/openrisc/README.openrisc +++ b/arch/openrisc/README.openrisc @@ -6,7 +6,7 @@ target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k). For information about OpenRISC processors and ongoing development: - website http://openrisc.net + website http://openrisc.io For more information about Linux on OpenRISC, please contact South Pole AB. @@ -24,17 +24,17 @@ In order to build and run Linux for OpenRISC, you'll need at least a basic toolchain and, perhaps, the architectural simulator. Steps to get these bits in place are outlined here. -1) The toolchain can be obtained from openrisc.net. Instructions for building +1) The toolchain can be obtained from openrisc.io. Instructions for building a toolchain can be found at: -http://openrisc.net/toolchain-build.html +https://github.com/openrisc/tutorials 2) or1ksim (optional) or1ksim is the architectural simulator which will allow you to actually run your OpenRISC Linux kernel if you don't have an OpenRISC processor at hand. - git clone git://openrisc.net/jonas/or1ksim-svn + git clone https://github.com/openrisc/or1ksim.git cd or1ksim ./configure --prefix=$OPENRISC_PREFIX diff --git a/arch/openrisc/TODO.openrisc b/arch/openrisc/TODO.openrisc index acfeef9c58e3..0eb04c8240f9 100644 --- a/arch/openrisc/TODO.openrisc +++ b/arch/openrisc/TODO.openrisc @@ -5,9 +5,6 @@ that are due for investigation shortly, i.e. our TODO list: -- Implement the rest of the DMA API... dma_map_sg, etc. --- Consolidate usage of memblock and bootmem... move everything over to - memblock. - -- Finish the renaming cleanup... there are references to or32 in the code which was an older name for the architecture. The name we've settled on is or1k and this change is slowly trickling through the stack. For the time diff --git a/arch/openrisc/include/asm/pgalloc.h b/arch/openrisc/include/asm/pgalloc.h index 87eebd185089..3e1a46615120 100644 --- a/arch/openrisc/include/asm/pgalloc.h +++ b/arch/openrisc/include/asm/pgalloc.h @@ -23,7 +23,6 @@ #include #include #include -#include extern int mem_init_done; diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h index 69c7df0e1420..3567aa7be555 100644 --- a/arch/openrisc/include/asm/pgtable.h +++ b/arch/openrisc/include/asm/pgtable.h @@ -69,7 +69,7 @@ extern void paging_init(void); */ #define PTRS_PER_PTE (1UL << (PAGE_SHIFT-2)) -#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-2)) +#define PTRS_PER_PGD (1UL << (32-PGDIR_SHIFT)) /* calculate how many PGD entries a user-level program can use * the first mappable virtual address is 0 diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index fec8bf97d806..aac0bde3330c 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -264,7 +264,7 @@ EXCEPTION_ENTRY(_data_page_fault_handler) l.srli r6,r6,26 // check opcode for write access #endif - l.sfgeui r6,0x34 // check opcode for write access + l.sfgeui r6,0x33 // check opcode for write access l.bnf 1f l.sfleui r6,0x37 l.bnf 1f @@ -1101,8 +1101,16 @@ ENTRY(__sys_fork) l.addi r3,r1,0 ENTRY(sys_rt_sigreturn) - l.j _sys_rt_sigreturn + l.jal _sys_rt_sigreturn l.addi r3,r1,0 + l.sfne r30,r0 + l.bnf _no_syscall_trace + l.nop + l.jal do_syscall_trace_leave + l.addi r3,r1,0 +_no_syscall_trace: + l.j _resume_userspace + l.nop /* This is a catch-all syscall for atomic instructions for the OpenRISC 1000. * The functions takes a variable number of parameters depending on which diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c index 7095dfe7666b..277123bb4bf8 100644 --- a/arch/openrisc/kernel/process.c +++ b/arch/openrisc/kernel/process.c @@ -173,6 +173,19 @@ copy_thread(unsigned long clone_flags, unsigned long usp, if (usp) userregs->sp = usp; + + /* + * For CLONE_SETTLS set "tp" (r10) to the TLS pointer passed to sys_clone. + * + * The kernel entry is: + * int clone (long flags, void *child_stack, int *parent_tid, + * int *child_tid, struct void *tls) + * + * This makes the source r7 in the kernel registers. + */ + if (clone_flags & CLONE_SETTLS) + userregs->gpr[10] = userregs->gpr[7]; + userregs->gpr[11] = 0; /* Result from fork() */ kregs->gpr[20] = 0; /* Userspace thread */ diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c index b4ed8b36e078..cb797a3beb47 100644 --- a/arch/openrisc/kernel/setup.c +++ b/arch/openrisc/kernel/setup.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include @@ -51,18 +50,16 @@ #include "vmlinux.h" -static unsigned long __init setup_memory(void) +static void __init setup_memory(void) { - unsigned long bootmap_size; unsigned long ram_start_pfn; - unsigned long free_ram_start_pfn; unsigned long ram_end_pfn; phys_addr_t memory_start, memory_end; struct memblock_region *region; memory_end = memory_start = 0; - /* Find main memory where is the kernel */ + /* Find main memory where is the kernel, we assume its the only one */ for_each_memblock(memory, region) { memory_start = region->base; memory_end = region->base + region->size; @@ -75,10 +72,11 @@ static unsigned long __init setup_memory(void) } ram_start_pfn = PFN_UP(memory_start); - /* free_ram_start_pfn is first page after kernel */ - free_ram_start_pfn = PFN_UP(__pa(_end)); ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM()); + /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */ + min_low_pfn = ram_start_pfn; + max_low_pfn = ram_end_pfn; max_pfn = ram_end_pfn; /* @@ -86,22 +84,13 @@ static unsigned long __init setup_memory(void) * * This makes the memory from the end of the kernel to the end of * RAM usable. - * init_bootmem sets the global values min_low_pfn, max_low_pfn. */ - bootmap_size = init_bootmem(free_ram_start_pfn, - ram_end_pfn - ram_start_pfn); - free_bootmem(PFN_PHYS(free_ram_start_pfn), - (ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT); - reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size, - BOOTMEM_DEFAULT); + memblock_reserve(__pa(_stext), _end - _stext); - for_each_memblock(reserved, region) { - printk(KERN_INFO "Reserved - 0x%08x-0x%08x\n", - (u32) region->base, (u32) region->size); - reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT); - } + early_init_fdt_reserve_self(); + early_init_fdt_scan_reserved_mem(); - return ram_end_pfn; + memblock_dump_all(); } struct cpuinfo cpuinfo; @@ -219,15 +208,6 @@ void __init or32_early_setup(void *fdt) early_init_devtree(fdt); } -static int __init openrisc_device_probe(void) -{ - of_platform_populate(NULL, NULL, NULL, NULL); - - return 0; -} - -device_initcall(openrisc_device_probe); - static inline unsigned long extract_value_bits(unsigned long reg, short bit_nr, short width) { @@ -282,8 +262,6 @@ void calibrate_delay(void) void __init setup_arch(char **cmdline_p) { - unsigned long max_low_pfn; - unflatten_and_copy_device_tree(); setup_cpuinfo(); @@ -304,8 +282,8 @@ void __init setup_arch(char **cmdline_p) initrd_below_start_ok = 1; #endif - /* setup bootmem allocator */ - max_low_pfn = setup_memory(); + /* setup memblock allocator */ + setup_memory(); /* paging_init() sets up the MMU and marks all pages as reserved */ paging_init(); @@ -317,7 +295,7 @@ void __init setup_arch(char **cmdline_p) *cmdline_p = boot_command_line; - printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n"); + printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n"); } static int show_cpuinfo(struct seq_file *m, void *v) diff --git a/arch/openrisc/kernel/vmlinux.lds.S b/arch/openrisc/kernel/vmlinux.lds.S index d68b9ede8423..ef31fc24344e 100644 --- a/arch/openrisc/kernel/vmlinux.lds.S +++ b/arch/openrisc/kernel/vmlinux.lds.S @@ -30,7 +30,13 @@ #include #include -OUTPUT_FORMAT("elf32-or32", "elf32-or32", "elf32-or32") +#ifdef __OR1K__ +#define __OUTPUT_FORMAT "elf32-or1k" +#else +#define __OUTPUT_FORMAT "elf32-or32" +#endif + +OUTPUT_FORMAT(__OUTPUT_FORMAT, __OUTPUT_FORMAT, __OUTPUT_FORMAT) jiffies = jiffies_64 + 4; SECTIONS diff --git a/arch/openrisc/mm/init.c b/arch/openrisc/mm/init.c index 7f94652311d7..f67d82b9d22f 100644 --- a/arch/openrisc/mm/init.c +++ b/arch/openrisc/mm/init.c @@ -106,11 +106,11 @@ static void __init map_ram(void) } /* Alloc one page for holding PTE's... */ - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); + pte = (pte_t *) __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte))); /* Fill the newly allocated page with PTE'S */ - for (j = 0; p < e && j < PTRS_PER_PGD; + for (j = 0; p < e && j < PTRS_PER_PTE; v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) { if (v >= (u32) _e_kernel_ro || v < (u32) _s_kernel_ro) diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c index fa60b81aee3e..8705a46218f9 100644 --- a/arch/openrisc/mm/ioremap.c +++ b/arch/openrisc/mm/ioremap.c @@ -124,11 +124,7 @@ pte_t __ref *pte_alloc_one_kernel(struct mm_struct *mm, if (likely(mem_init_done)) { pte = (pte_t *) __get_free_page(GFP_KERNEL); } else { - pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); -#if 0 - /* FIXME: use memblock... */ pte = (pte_t *) __va(memblock_alloc(PAGE_SIZE, PAGE_SIZE)); -#endif } if (pte) diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig index 38da6e299149..c3f1fb9ee820 100644 --- a/drivers/video/console/Kconfig +++ b/drivers/video/console/Kconfig @@ -9,7 +9,7 @@ config VGA_CONSOLE depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && \ !SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \ (!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \ - !ARM64 && !ARC && !MICROBLAZE + !ARM64 && !ARC && !MICROBLAZE && !OPENRISC default y help Saying Y here will allow you to use Linux in text mode through a