Second round of IIO fixes for the 3.13 cycle.

2 fixes here.
 
 * The gp2ap020a00f is a simple missing kconfig dependency.
 
 * The hid sensors hub fix is a work around for an issue introduced by hardware
 changes due to a certain large software vendor having an 'interesting'
 interpretation of the specification and hence indexing some arrays from 1
 rather than 0.  The fix takes advantage of the logical min and max reading
 facilities introduced by the precursor patch to figure out whether we have
 a 0 indexed or 1 indexed device and to adjust appropriately.  It also
 drops a previous kconfig option that allowed this issue to be worked around
 at build time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJSnkM1AAoJEFSFNJnE9BaIV/0P/26YRyWfInekegDN9nviEMno
 bBZIQy1iuiZOSqw78XdiN4NBfK3Vy4F/cx+yGkr2fVa6NV/B6p3iL0+Pv4HiZSqs
 VY4TlNs5el7GD399+nOatgCAM6NXvkSE9rOAEdNWgWUupy/XVRx6nCpghRltnmu3
 mSZCywSnHuCCj2TG9Q/FVjMp3GR3GboSnF09Q/8Xxt7HNj2poxAuYCcMGl9SYgDw
 gfaKsmGZk488H5CA2FjIWQ5/5vOTCxoPr5MgTjqfpLD2tB5+ZsdMmDacsEa31nZS
 RHKzLDvYuAlBeaeR/FUeB5S6YgZpB0MulNsF2z2ms99mSmmjWTr1qun5cdMIh9su
 OBKtmew9MnXWlP6yxSVNTvmPbGHSzzb9x2grvptPN6x/08Qk/Sv0qJcmb267Vr0u
 EwqjSqIDdMOTfhlltpWeIF3+6bHj7RTrVfXvNi+plAKx1gp8/2pYZAp05eNHO6tD
 ITyOCiL7O1KNcG5si+EI5EdCqWj9Dmdul16gHFafPohDJWiCNo/aLhb3jQKZWZyA
 JnM6DENEmdicHeYuQKaBV95ptLdzAU9POapJzMMMQVNY5RS6DnHPBVCAuqrkdzAo
 57FT5dewm6FI2+k+ckawtUgyf56nCzsbEHo3iFaHn0ElxWJeR8/Acn/jR6Agm1AN
 DGNgavLLU3kFN9lHjPk3
 =BgVg
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-3.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

Second round of IIO fixes for the 3.13 cycle.

2 fixes here.

* The gp2ap020a00f is a simple missing kconfig dependency.

* The hid sensors hub fix is a work around for an issue introduced by hardware
changes due to a certain large software vendor having an 'interesting'
interpretation of the specification and hence indexing some arrays from 1
rather than 0.  The fix takes advantage of the logical min and max reading
facilities introduced by the precursor patch to figure out whether we have
a 0 indexed or 1 indexed device and to adjust appropriately.  It also
drops a previous kconfig option that allowed this issue to be worked around
at build time.
This commit is contained in:
Greg Kroah-Hartman 2013-12-03 13:24:58 -08:00
commit 55ef003e4a
6 changed files with 39 additions and 27 deletions

View File

@ -112,13 +112,15 @@ static int sensor_hub_get_physical_device_count(
static void sensor_hub_fill_attr_info(
struct hid_sensor_hub_attribute_info *info,
s32 index, s32 report_id, s32 units, s32 unit_expo, s32 size)
s32 index, s32 report_id, struct hid_field *field)
{
info->index = index;
info->report_id = report_id;
info->units = units;
info->unit_expo = unit_expo;
info->size = size/8;
info->units = field->unit;
info->unit_expo = field->unit_exponent;
info->size = (field->report_size * field->report_count)/8;
info->logical_minimum = field->logical_minimum;
info->logical_maximum = field->logical_maximum;
}
static struct hid_sensor_hub_callbacks *sensor_hub_get_callback(
@ -325,9 +327,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
if (field->physical == usage_id &&
field->logical == attr_usage_id) {
sensor_hub_fill_attr_info(info, i, report->id,
field->unit, field->unit_exponent,
field->report_size *
field->report_count);
field);
ret = 0;
} else {
for (j = 0; j < field->maxusage; ++j) {
@ -336,11 +336,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
field->usage[j].collection_index ==
collection_index) {
sensor_hub_fill_attr_info(info,
i, report->id,
field->unit,
field->unit_exponent,
field->report_size *
field->report_count);
i, report->id, field);
ret = 0;
break;
}

View File

@ -25,13 +25,4 @@ config HID_SENSOR_IIO_TRIGGER
If this driver is compiled as a module, it will be named
hid-sensor-trigger.
config HID_SENSOR_ENUM_BASE_QUIRKS
bool "ENUM base quirks for HID Sensor IIO drivers"
depends on HID_SENSOR_IIO_COMMON
help
Say yes here to build support for sensor hub FW using
enumeration, which is using 1 as base instead of 0.
Since logical minimum is still set 0 instead of 1,
there is no easy way to differentiate.
endmenu

View File

@ -33,24 +33,34 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
{
struct hid_sensor_common *st = iio_trigger_get_drvdata(trig);
int state_val;
int report_val;
if (state) {
if (sensor_hub_device_open(st->hsdev))
return -EIO;
} else
sensor_hub_device_close(st->hsdev);
state_val =
HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM;
report_val =
HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM;
} else {
sensor_hub_device_close(st->hsdev);
state_val =
HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM;
report_val =
HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM;
}
state_val = state ? 1 : 0;
if (IS_ENABLED(CONFIG_HID_SENSOR_ENUM_BASE_QUIRKS))
++state_val;
st->data_ready = state;
state_val += st->power_state.logical_minimum;
report_val += st->report_state.logical_minimum;
sensor_hub_set_feature(st->hsdev, st->power_state.report_id,
st->power_state.index,
(s32)state_val);
sensor_hub_set_feature(st->hsdev, st->report_state.report_id,
st->report_state.index,
(s32)state_val);
(s32)report_val);
return 0;
}

View File

@ -43,6 +43,7 @@ config GP2AP020A00F
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select IRQ_WORK
help
Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip
hooked to an I2C bus.

View File

@ -42,6 +42,8 @@ struct hid_sensor_hub_attribute_info {
s32 units;
s32 unit_expo;
s32 size;
s32 logical_minimum;
s32 logical_maximum;
};
/**

View File

@ -117,4 +117,16 @@
#define HID_USAGE_SENSOR_PROP_REPORT_STATE 0x200316
#define HID_USAGE_SENSOR_PROY_POWER_STATE 0x200319
/* Power state enumerations */
#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x00
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x01
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x02
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x03
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x04
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x05
/* Report State enumerations */
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x00
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x01
#endif