ARC: [axs101] Add support for AXS101 SDP (software development platform)
The AXS10x platforms consist of a mainboard with peripherals, on which several daughter cards can be placed. The daughter cards typically contain a CPU and memory. Signed-off-by: Mischa Jonker <mjonker@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This commit is contained in:
Alexey Brodkin
Vineet Gupta
parent
4db27dca60
commit
556cc1c5f5
|
|
@ -0,0 +1,7 @@
|
|||
Synopsys DesignWare ARC Software Development Platforms Device Tree Bindings
|
||||
---------------------------------------------------------------------------
|
||||
|
||||
SDP Main Board with an AXC001 CPU Card hoisting ARC700 core in silicon
|
||||
|
||||
Required root node properties:
|
||||
- compatible = "snps,axs101";
|
||||
|
|
@ -9579,6 +9579,13 @@ F: arch/arc/
|
|||
F: Documentation/devicetree/bindings/arc/
|
||||
F: drivers/tty/serial/arc_uart.c
|
||||
|
||||
SYNOPSYS ARC SDP platform support
|
||||
M: Alexey Brodkin <abrodkin@synopsys.com>
|
||||
S: Supported
|
||||
F: arch/arc/plat-axs10x
|
||||
F: arch/arc/boot/dts/ax*
|
||||
F: Documentation/devicetree/bindings/arc/axs10*
|
||||
|
||||
SYSV FILESYSTEM
|
||||
M: Christoph Hellwig <hch@infradead.org>
|
||||
S: Maintained
|
||||
|
|
|
|||
|
|
@ -83,6 +83,7 @@ menu "ARC Platform/SoC/Board"
|
|||
|
||||
source "arch/arc/plat-sim/Kconfig"
|
||||
source "arch/arc/plat-tb10x/Kconfig"
|
||||
source "arch/arc/plat-axs10x/Kconfig"
|
||||
#New platform adds here
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -83,6 +83,7 @@ core-y += arch/arc/boot/dts/
|
|||
|
||||
core-$(CONFIG_ARC_PLAT_SIM) += arch/arc/plat-sim/
|
||||
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
|
||||
core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
|
||||
|
||||
drivers-$(CONFIG_OPROFILE) += arch/arc/oprofile/
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,79 @@
|
|||
/*
|
||||
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Device tree for AXC001 770D/EM6/AS221 CPU card
|
||||
* Note that this file only supports the 770D CPU
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "snps,arc";
|
||||
clock-frequency = <750000000>; /* 750 MHZ */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cpu_card {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ranges = <0x00000000 0xf0000000 0x10000000>;
|
||||
|
||||
cpu_intc: arc700-intc@cpu {
|
||||
compatible = "snps,arc700-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
/*
|
||||
* this GPIO block ORs all interrupts on CPU card (creg,..)
|
||||
* to uplink only 1 IRQ to ARC core intc
|
||||
*/
|
||||
dw-apb-gpio@0x2000 {
|
||||
compatible = "snps,dw-apb-gpio";
|
||||
reg = < 0x2000 0x80 >;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ictl_intc: gpio-controller@0 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <30>;
|
||||
reg = <0>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-parent = <&cpu_intc>;
|
||||
interrupts = <15>;
|
||||
};
|
||||
};
|
||||
|
||||
debug_uart: dw-apb-uart@0x5000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x5000 0x100>;
|
||||
clock-frequency = <33333000>;
|
||||
interrupt-parent = <&ictl_intc>;
|
||||
interrupts = <19 4>;
|
||||
baud = <115200>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
arcpmu0: pmu {
|
||||
compatible = "snps,arc700-pct";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00000000 0x80000000 0x40000000>;
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* 512MiB */
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
/*
|
||||
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
||||
*
|
||||
* ARC AXS101 S/W development platform
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "axc001.dtsi"
|
||||
/include/ "axs10x_mb.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "snps,axs101";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=tty0 console=ttyS3,115200n8 consoleblank=0";
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,223 @@
|
|||
/*
|
||||
* Support for peripherals on the AXS10x mainboard
|
||||
*
|
||||
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/ {
|
||||
axs10x_mb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x00000000 0xe0000000 0x10000000>;
|
||||
interrupt-parent = <&mb_intc>;
|
||||
|
||||
clocks {
|
||||
i2cclk: i2cclk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <50000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
apbclk: apbclk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <50000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
mmcclk: mmcclk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <50000000>;
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* This INTC is actually connected to DW APB GPIO
|
||||
* which acts as a wire between MB INTC and CPU INTC.
|
||||
* GPIO INTC is configured in platform init code
|
||||
* and here we mimic direct connection from MB INTC to
|
||||
* CPU INTC, thus we set "interrupts = <7>" instead of
|
||||
* "interrupts = <12>"
|
||||
*/
|
||||
mb_intc: dw-apb-ictl@0x12000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dw-apb-ictl";
|
||||
reg = < 0x12000 0x200 >;
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&cpu_intc>;
|
||||
interrupts = < 7 >;
|
||||
};
|
||||
|
||||
ethernet@0x18000 {
|
||||
#interrupt-cells = <1>;
|
||||
compatible = "snps,dwmac";
|
||||
reg = < 0x18000 0x2000 >;
|
||||
interrupts = < 4 >;
|
||||
interrupt-names = "macirq";
|
||||
phy-mode = "rgmii";
|
||||
snps,pbl = < 32 >;
|
||||
clocks = <&apbclk>;
|
||||
clock-names = "stmmaceth";
|
||||
};
|
||||
|
||||
ehci@0x40000 {
|
||||
compatible = "generic-ehci";
|
||||
reg = < 0x40000 0x100 >;
|
||||
interrupts = < 8 >;
|
||||
};
|
||||
|
||||
ohci@0x60000 {
|
||||
compatible = "generic-ohci";
|
||||
reg = < 0x60000 0x100 >;
|
||||
interrupts = < 8 >;
|
||||
};
|
||||
|
||||
mmc@0x15000 {
|
||||
compatible = "snps,dw-mshc";
|
||||
reg = < 0x15000 0x400 >;
|
||||
num-slots = < 1 >;
|
||||
fifo-depth = < 16 >;
|
||||
card-detect-delay = < 200 >;
|
||||
clocks = <&apbclk>, <&mmcclk>;
|
||||
clock-names = "biu", "ciu";
|
||||
interrupts = < 7 >;
|
||||
bus-width = < 4 >;
|
||||
};
|
||||
|
||||
uart@0x20000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x20000 0x100>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <17>;
|
||||
baud = <115200>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
uart@0x21000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x21000 0x100>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <18>;
|
||||
baud = <115200>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
/* UART muxed with USB data port (ttyS3) */
|
||||
uart@0x22000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
reg = <0x22000 0x100>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <19>;
|
||||
baud = <115200>;
|
||||
reg-shift = <2>;
|
||||
reg-io-width = <4>;
|
||||
};
|
||||
|
||||
i2c@0x1d000 {
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0x1d000 0x100>;
|
||||
clock-frequency = <400000>;
|
||||
clocks = <&i2cclk>;
|
||||
interrupts = <14>;
|
||||
};
|
||||
|
||||
i2c@0x1e000 {
|
||||
compatible = "snps,designware-i2c";
|
||||
reg = <0x1e000 0x100>;
|
||||
clock-frequency = <400000>;
|
||||
clocks = <&i2cclk>;
|
||||
interrupts = <15>;
|
||||
};
|
||||
|
||||
i2c@0x1f000 {
|
||||
compatible = "snps,designware-i2c";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1f000 0x100>;
|
||||
clock-frequency = <400000>;
|
||||
clocks = <&i2cclk>;
|
||||
interrupts = <16>;
|
||||
|
||||
eeprom@0x54{
|
||||
compatible = "24c01";
|
||||
reg = <0x54>;
|
||||
pagesize = <0x8>;
|
||||
};
|
||||
|
||||
eeprom@0x57{
|
||||
compatible = "24c04";
|
||||
reg = <0x57>;
|
||||
pagesize = <0x8>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio0:gpio@13000 {
|
||||
compatible = "snps,dw-apb-gpio";
|
||||
reg = <0x13000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio0_banka: gpio-controller@0 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <32>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
gpio0_bankb: gpio-controller@1 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <8>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
gpio0_bankc: gpio-controller@2 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <8>;
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio1:gpio@14000 {
|
||||
compatible = "snps,dw-apb-gpio";
|
||||
reg = <0x14000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
gpio1_banka: gpio-controller@0 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <30>;
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
gpio1_bankb: gpio-controller@1 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <10>;
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
gpio1_bankc: gpio-controller@2 {
|
||||
compatible = "snps,dw-apb-gpio-port";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
snps,nr-gpios = <8>;
|
||||
reg = <2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,111 @@
|
|||
CONFIG_CROSS_COMPILE="arc-linux-uclibc-"
|
||||
CONFIG_DEFAULT_HOSTNAME="ARCLinux"
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
# CONFIG_CROSS_MEMORY_ATTACH is not set
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_NAMESPACES=y
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
# CONFIG_VM_EVENT_COUNTERS is not set
|
||||
# CONFIG_SLUB_DEBUG is not set
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_ARC_PLAT_AXS10X=y
|
||||
CONFIG_AXS101=y
|
||||
CONFIG_ARC_CACHE_LINE_SHIFT=5
|
||||
CONFIG_ARC_BUILTIN_DTB_NAME="axs101"
|
||||
CONFIG_PREEMPT=y
|
||||
# CONFIG_COMPACTION is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_IP_PNP_RARP=y
|
||||
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
|
||||
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
|
||||
# CONFIG_INET_XFRM_MODE_BEET is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
# CONFIG_STANDALONE is not set
|
||||
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
|
||||
# CONFIG_FIRMWARE_IN_KERNEL is not set
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NET_VENDOR_ARC is not set
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
CONFIG_STMMAC_ETH=y
|
||||
# CONFIG_NET_VENDOR_VIA is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
CONFIG_NATIONAL_PHY=y
|
||||
# CONFIG_USB_NET_DRIVERS is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_MOUSE_PS2_TOUCHKIT=y
|
||||
CONFIG_MOUSE_SERIAL=y
|
||||
CONFIG_MOUSE_SYNAPTICS_USB=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_DEVKMEM is not set
|
||||
CONFIG_SERIAL_8250=y
|
||||
CONFIG_SERIAL_8250_CONSOLE=y
|
||||
CONFIG_SERIAL_8250_DW=y
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_DESIGNWARE_PLATFORM=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_FB=y
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
# CONFIG_LOGO_LINUX_CLUT224 is not set
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_HCD_PLATFORM=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_PLATFORM=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_DW=y
|
||||
CONFIG_MMC_DW_IDMAC=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_NTFS_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
CONFIG_STRIP_ASM_SYMS=y
|
||||
CONFIG_LOCKUP_DETECTOR=y
|
||||
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
# CONFIG_DEBUG_PREEMPT is not set
|
||||
# CONFIG_FTRACE is not set
|
||||
|
|
@ -0,0 +1,35 @@
|
|||
#
|
||||
# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License version 2 as
|
||||
# published by the Free Software Foundation.
|
||||
#
|
||||
|
||||
config ARC_PLAT_AXS10X
|
||||
bool "Synopsys ARC AXS10x Software Development Platforms"
|
||||
select DW_APB_ICTL
|
||||
select GPIO_DWAPB
|
||||
select OF_GPIO
|
||||
select GENERIC_IRQ_CHIP
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
help
|
||||
Support for the ARC AXS10x Software Development Platforms.
|
||||
|
||||
The AXS10x Platforms consist of a mainboard with peripherals,
|
||||
on which several daughter cards can be placed. The daughter cards
|
||||
typically contain a CPU and memory.
|
||||
|
||||
if ARC_PLAT_AXS10X
|
||||
|
||||
config AXS101
|
||||
bool "AXS101 with AXC001 CPU Card (ARC 770D/EM6/AS221)"
|
||||
help
|
||||
This adds support for the 770D/EM6/AS221 CPU Card. Only the ARC
|
||||
770D is supported in Linux.
|
||||
|
||||
The AXS101 Platform consists of an AXS10x mainboard with
|
||||
this daughtercard. Please use the axs101.dts device tree
|
||||
with this configuration.
|
||||
|
||||
endif
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
#
|
||||
# Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
||||
#
|
||||
# This program is free software; you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License version 2 as
|
||||
# published by the Free Software Foundation.
|
||||
#
|
||||
|
||||
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x.o
|
||||
|
|
@ -0,0 +1,298 @@
|
|||
/*
|
||||
* AXS101 Software Development Platform
|
||||
*
|
||||
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/of_platform.h>
|
||||
#include <asm/mach_desc.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
#define AXS_MB_CGU 0xE0010000
|
||||
#define AXS_MB_CREG 0xE0011000
|
||||
|
||||
#define CREG_MB_IRQ_MUX (AXS_MB_CREG + 0x214)
|
||||
#define CREG_MB_SW_RESET (AXS_MB_CREG + 0x220)
|
||||
#define CREG_MB_VER (AXS_MB_CREG + 0x230)
|
||||
#define CREG_MB_CONFIG (AXS_MB_CREG + 0x234)
|
||||
|
||||
#define AXC001_CREG 0xF0001000
|
||||
#define AXC001_GPIO_INTC 0xF0003000
|
||||
|
||||
#define CREG_CPU_ADDR_770 (AXC001_CREG + 0x20)
|
||||
#define CREG_CPU_ADDR_TUNN (AXC001_CREG + 0x60)
|
||||
#define CREG_CPU_ADDR_770_UPD (AXC001_CREG + 0x34)
|
||||
#define CREG_CPU_ADDR_TUNN_UPD (AXC001_CREG + 0x74)
|
||||
|
||||
#define CREG_CPU_ARC770_IRQ_MUX (AXC001_CREG + 0x114)
|
||||
#define CREG_CPU_GPIO_UART_MUX (AXC001_CREG + 0x120)
|
||||
|
||||
static void enable_gpio_intc_wire(void)
|
||||
{
|
||||
/*
|
||||
* Peripherals on CPU Card and Mother Board are wired to cpu intc via
|
||||
* intermediate DW APB GPIO blocks (mainly for debouncing)
|
||||
*
|
||||
* ---------------------
|
||||
* | snps,arc700-intc |
|
||||
* ---------------------
|
||||
* | #7 | #15
|
||||
* ------------------- -------------------
|
||||
* | snps,dw-apb-gpio | | snps,dw-apb-gpio |
|
||||
* ------------------- -------------------
|
||||
* | |
|
||||
* | [ Debug UART on cpu card ]
|
||||
* |
|
||||
* ------------------------
|
||||
* | snps,dw-apb-intc (MB)|
|
||||
* ------------------------
|
||||
* | | | |
|
||||
* [eth] [uart] [... other perip on Main Board]
|
||||
*
|
||||
* Current implementation of "irq-dw-apb-ictl" driver doesn't work well
|
||||
* with stacked INTCs. In particular problem happens if its master INTC
|
||||
* not yet instantiated. See discussion here -
|
||||
* https://lkml.org/lkml/2015/3/4/755
|
||||
*
|
||||
* So setup the first gpio block as a passive pass thru and hide it from
|
||||
* DT hardware topology - connect MB intc directly to cpu intc
|
||||
* The GPIO "wire" needs to be init nevertheless (here)
|
||||
*
|
||||
* One side adv is that peripheral interrupt handling avoids one nested
|
||||
* intc ISR hop
|
||||
*/
|
||||
#define GPIO_INTEN (AXC001_GPIO_INTC + 0x30)
|
||||
#define GPIO_INTMASK (AXC001_GPIO_INTC + 0x34)
|
||||
#define GPIO_INTTYPE_LEVEL (AXC001_GPIO_INTC + 0x38)
|
||||
#define GPIO_INT_POLARITY (AXC001_GPIO_INTC + 0x3c)
|
||||
#define MB_TO_GPIO_IRQ 12
|
||||
|
||||
iowrite32(~(1 << MB_TO_GPIO_IRQ), (void __iomem *) GPIO_INTMASK);
|
||||
iowrite32(0, (void __iomem *) GPIO_INTTYPE_LEVEL);
|
||||
iowrite32(~0, (void __iomem *) GPIO_INT_POLARITY);
|
||||
iowrite32(1 << MB_TO_GPIO_IRQ, (void __iomem *) GPIO_INTEN);
|
||||
}
|
||||
|
||||
static void axs10x_print_board_ver(unsigned int creg, const char *str)
|
||||
{
|
||||
union ver {
|
||||
struct {
|
||||
#ifdef CONFIG_CPU_BIG_ENDIAN
|
||||
unsigned int pad:11, y:12, m:4, d:5;
|
||||
#else
|
||||
unsigned int d:5, m:4, y:12, pad:11;
|
||||
#endif
|
||||
};
|
||||
unsigned int val;
|
||||
} board;
|
||||
|
||||
board.val = ioread32((void __iomem *)creg);
|
||||
pr_info("AXS: %s FPGA Date: %u-%u-%u\n", str, board.d, board.m,
|
||||
board.y);
|
||||
}
|
||||
|
||||
static void axs10x_early_init(void)
|
||||
{
|
||||
int mb_rev;
|
||||
char mb[32];
|
||||
|
||||
/* Determine motherboard version */
|
||||
if (ioread32((void __iomem *) CREG_MB_CONFIG) & (1 << 28))
|
||||
mb_rev = 3; /* HT-3 (rev3.0) */
|
||||
else
|
||||
mb_rev = 2; /* HT-2 (rev2.0) */
|
||||
|
||||
enable_gpio_intc_wire();
|
||||
|
||||
scnprintf(mb, 32, "MainBoard v%d", mb_rev);
|
||||
axs10x_print_board_ver(CREG_MB_VER, mb);
|
||||
}
|
||||
|
||||
/*
|
||||
* Set up System Memory Map for ARC cpu / peripherals controllers
|
||||
*
|
||||
* Each AXI master has a 4GB memory map specified as 16 apertures of 256MB, each
|
||||
* of which maps to a corresponding 256MB aperture in Target slave memory map.
|
||||
*
|
||||
* e.g. ARC cpu AXI Master's aperture 8 (0x8000_0000) is mapped to aperture 0
|
||||
* (0x0000_0000) of DDR Port 0 (slave #1)
|
||||
*
|
||||
* Access from cpu to MB controllers such as GMAC is setup using AXI Tunnel:
|
||||
* which has master/slaves on both ends.
|
||||
* e.g. aperture 14 (0xE000_0000) of ARC cpu is mapped to aperture 14
|
||||
* (0xE000_0000) of CPU Card AXI Tunnel slave (slave #3) which is mapped to
|
||||
* MB AXI Tunnel Master, which also has a mem map setup
|
||||
*
|
||||
* In the reverse direction, MB AXI Masters (e.g. GMAC) mem map is setup
|
||||
* to map to MB AXI Tunnel slave which connects to CPU Card AXI Tunnel Master
|
||||
*/
|
||||
struct aperture {
|
||||
unsigned int slave_sel:4, slave_off:4, pad:24;
|
||||
};
|
||||
|
||||
/* CPU Card target slaves */
|
||||
#define AXC001_SLV_NONE 0
|
||||
#define AXC001_SLV_DDR_PORT0 1
|
||||
#define AXC001_SLV_SRAM 2
|
||||
#define AXC001_SLV_AXI_TUNNEL 3
|
||||
#define AXC001_SLV_AXI2APB 6
|
||||
#define AXC001_SLV_DDR_PORT1 7
|
||||
|
||||
/* MB AXI Target slaves */
|
||||
#define AXS_MB_SLV_NONE 0
|
||||
#define AXS_MB_SLV_AXI_TUNNEL_CPU 1
|
||||
#define AXS_MB_SLV_AXI_TUNNEL_HAPS 2
|
||||
#define AXS_MB_SLV_SRAM 3
|
||||
#define AXS_MB_SLV_CONTROL 4
|
||||
|
||||
/* MB AXI masters */
|
||||
#define AXS_MB_MST_TUNNEL_CPU 0
|
||||
#define AXS_MB_MST_USB_OHCI 10
|
||||
|
||||
/*
|
||||
* memmap for ARC core on CPU Card
|
||||
*/
|
||||
static const struct aperture axc001_memmap[16] = {
|
||||
{AXC001_SLV_AXI_TUNNEL, 0x0},
|
||||
{AXC001_SLV_AXI_TUNNEL, 0x1},
|
||||
{AXC001_SLV_SRAM, 0x0}, /* 0x2000_0000: Local SRAM */
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_DDR_PORT0, 0x0}, /* 0x8000_0000: DDR 0..256M */
|
||||
{AXC001_SLV_DDR_PORT0, 0x1}, /* 0x9000_0000: DDR 256..512M */
|
||||
{AXC001_SLV_DDR_PORT1, 0x0},
|
||||
{AXC001_SLV_DDR_PORT1, 0x1},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_AXI_TUNNEL, 0xD},
|
||||
{AXC001_SLV_AXI_TUNNEL, 0xE}, /* MB: CREG, CGU... */
|
||||
{AXC001_SLV_AXI2APB, 0x0}, /* CPU Card local CREG, CGU... */
|
||||
};
|
||||
|
||||
/*
|
||||
* memmap for CPU Card AXI Tunnel Master (for access by MB controllers)
|
||||
* GMAC (MB) -> MB AXI Tunnel slave -> CPU Card AXI Tunnel Master -> DDR
|
||||
*/
|
||||
static const struct aperture axc001_axi_tunnel_memmap[16] = {
|
||||
{AXC001_SLV_AXI_TUNNEL, 0x0},
|
||||
{AXC001_SLV_AXI_TUNNEL, 0x1},
|
||||
{AXC001_SLV_SRAM, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_DDR_PORT0, 0x0},
|
||||
{AXC001_SLV_DDR_PORT0, 0x1},
|
||||
{AXC001_SLV_DDR_PORT1, 0x0},
|
||||
{AXC001_SLV_DDR_PORT1, 0x1},
|
||||
{AXC001_SLV_NONE, 0x0},
|
||||
{AXC001_SLV_AXI_TUNNEL, 0xD},
|
||||
{AXC001_SLV_AXI_TUNNEL, 0xE},
|
||||
{AXC001_SLV_AXI2APB, 0x0},
|
||||
};
|
||||
|
||||
/*
|
||||
* memmap for MB AXI Masters
|
||||
* Same mem map for all perip controllers as well as MB AXI Tunnel Master
|
||||
*/
|
||||
static const struct aperture axs_mb_memmap[16] = {
|
||||
{AXS_MB_SLV_SRAM, 0x0},
|
||||
{AXS_MB_SLV_SRAM, 0x0},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0x8}, /* DDR on CPU Card */
|
||||
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0x9}, /* DDR on CPU Card */
|
||||
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0xA},
|
||||
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0xB},
|
||||
{AXS_MB_SLV_NONE, 0x0},
|
||||
{AXS_MB_SLV_AXI_TUNNEL_HAPS, 0xD},
|
||||
{AXS_MB_SLV_CONTROL, 0x0}, /* MB Local CREG, CGU... */
|
||||
{AXS_MB_SLV_AXI_TUNNEL_CPU, 0xF},
|
||||
};
|
||||
|
||||
static noinline void
|
||||
axs101_set_memmap(void __iomem *base, const struct aperture map[16])
|
||||
{
|
||||
unsigned int slave_select, slave_offset;
|
||||
int i;
|
||||
|
||||
slave_select = slave_offset = 0;
|
||||
for (i = 0; i < 8; i++) {
|
||||
slave_select |= map[i].slave_sel << (i << 2);
|
||||
slave_offset |= map[i].slave_off << (i << 2);
|
||||
}
|
||||
|
||||
iowrite32(slave_select, base + 0x0); /* SLV0 */
|
||||
iowrite32(slave_offset, base + 0x8); /* OFFSET0 */
|
||||
|
||||
slave_select = slave_offset = 0;
|
||||
for (i = 0; i < 8; i++) {
|
||||
slave_select |= map[i+8].slave_sel << (i << 2);
|
||||
slave_offset |= map[i+8].slave_off << (i << 2);
|
||||
}
|
||||
|
||||
iowrite32(slave_select, base + 0x4); /* SLV1 */
|
||||
iowrite32(slave_offset, base + 0xC); /* OFFSET1 */
|
||||
}
|
||||
|
||||
static void axs101_early_init(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
/* ARC 770D memory view */
|
||||
axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_770, axc001_memmap);
|
||||
iowrite32(1, (void __iomem *) CREG_CPU_ADDR_770_UPD);
|
||||
|
||||
/* AXI tunnel memory map (incoming traffic from MB into CPU Card */
|
||||
axs101_set_memmap((void __iomem *) CREG_CPU_ADDR_TUNN,
|
||||
axc001_axi_tunnel_memmap);
|
||||
iowrite32(1, (void __iomem *) CREG_CPU_ADDR_TUNN_UPD);
|
||||
|
||||
/* MB peripherals memory map */
|
||||
for (i = AXS_MB_MST_TUNNEL_CPU; i <= AXS_MB_MST_USB_OHCI; i++)
|
||||
axs101_set_memmap((void __iomem *) AXS_MB_CREG + (i << 4),
|
||||
axs_mb_memmap);
|
||||
|
||||
iowrite32(0x3ff, (void __iomem *) AXS_MB_CREG + 0x100); /* Update */
|
||||
|
||||
/* GPIO pins 18 and 19 are used as UART rx and tx, respectively. */
|
||||
iowrite32(0x01, (void __iomem *) CREG_CPU_GPIO_UART_MUX);
|
||||
|
||||
/* Set up the MB interrupt system: mux interrupts to GPIO7) */
|
||||
iowrite32(0x01, (void __iomem *) CREG_MB_IRQ_MUX);
|
||||
|
||||
/* reset ethernet and ULPI interfaces */
|
||||
iowrite32(0x18, (void __iomem *) CREG_MB_SW_RESET);
|
||||
|
||||
/* map GPIO 14:10 to ARC 9:5 (IRQ mux change for MB v2 onwards) */
|
||||
iowrite32(0x52, (void __iomem *) CREG_CPU_ARC770_IRQ_MUX);
|
||||
|
||||
axs10x_early_init();
|
||||
}
|
||||
|
||||
static const char *axs101_compat[] __initconst = {
|
||||
"snps,axs101",
|
||||
NULL,
|
||||
};
|
||||
|
||||
MACHINE_START(AXS101, "axs101")
|
||||
.dt_compat = axs101_compat,
|
||||
.init_early = axs101_early_init,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue