hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

[ALSA] Add documentation for HDSP MADI 

Documentation
Added documentation for HDSP MADI driver by Winfried Ritsch.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Takashi Iwai 2005-06-03 11:27:00 +02:00 committed by Jaroslav Kysela
parent 763f356cd8
commit 5470440a2a
2 changed files with 373 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Documentation/sound/alsa/ALSA-Configuration.txt
View File

@ -674,6 +674,17 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
stage of boot sequence. See "Early Buffer Allocation" stage of boot sequence. See "Early Buffer Allocation"
section. section.
Module snd-hdspm
----------------
Module for RME HDSP MADI board.
precise_ptr - Enable precise pointer, or disable.
line_outs_monitor - Send playback streams to analog outs by default.
enable_monitor - Enable Analog Out on Channel 63/64 by default.
See hdspm.txt for details.
Module snd-ice1712 Module snd-ice1712
------------------ ------------------

362
Documentation/sound/alsa/hdspm.txt Normal file
View File

@ -0,0 +1,362 @@
Software Interface ALSA-DSP MADI Driver
(translated from German, so no good English ;-),
2004 - winfried ritsch
Full functionality has been added to the driver. Since some of
the Controls and startup-options are ALSA-Standard and only the
special Controls are described and discussed below.
hardware functionality:
Audio transmission:
number of channels -- depends on transmission mode
The number of channels chosen is from 1..Nmax. The reason to
use for a lower number of channels is only resource allocation,
since unused DMA channels are disabled and less memory is
allocated. So also the throughput of the PCI system can be
scaled. (Only important for low performance boards).
Single Speed -- 1..64 channels
(Note: Choosing the 56channel mode for transmission or as
receiver, only 56 are transmitted/received over the MADI, but
all 64 channels are available for the mixer, so channel count
for the driver)
Double Speed -- 1..32 channels
Note: Choosing the 56-channel mode for
transmission/receive-mode , only 28 are transmitted/received
over the MADI, but all 32 channels are available for the mixer,
so channel count for the driver
Quad Speed -- 1..16 channels
Note: Choosing the 56-channel mode for
transmission/receive-mode , only 14 are transmitted/received
over the MADI, but all 16 channels are available for the mixer,
so channel count for the driver
Format -- signed 32 Bit Little Endian (SNDRV_PCM_FMTBIT_S32_LE)
Sample Rates --
Single Speed -- 32000, 44100, 48000
Double Speed -- 64000, 88200, 96000 (untested)
Quad Speed -- 128000, 176400, 192000 (untested)
access-mode -- MMAP (memory mapped), Not interleaved
(PCM_NON-INTERLEAVED)
buffer-sizes -- 64,128,256,512,1024,2048,8192 Samples
fragments -- 2
Hardware-pointer -- 2 Modi
The Card supports the readout of the actual Buffer-pointer,
where DMA reads/writes. Since of the bulk mode of PCI it is only
64 Byte accurate. SO it is not really usable for the
ALSA-mid-level functions (here the buffer-ID gives a better
result), but if MMAP is used by the application. Therefore it
can be configured at load-time with the parameter
precise-pointer.
(Hint: Experimenting I found that the pointer is maximum 64 to
large never to small. So if you subtract 64 you always have a
safe pointer for writing, which is used on this mode inside
ALSA. In theory now you can get now a latency as low as 16
Samples, which is a quarter of the interrupt possibilities.)
Precise Pointer -- off
interrupt used for pointer-calculation
Precise Pointer -- on
hardware pointer used.
Controller:
Since DSP-MADI-Mixer has 8152 Fader, it does not make sense to
use the standard mixer-controls, since this would break most of
(especially graphic) ALSA-Mixer GUIs. So Mixer control has be
provided by a 2-dimensional controller using the
hwdep-interface.
Also all 128+256 Peak and RMS-Meter can be accessed via the
hwdep-interface. Since it could be a performance problem always
copying and converting Peak and RMS-Levels even if you just need
one, I decided to export the hardware structure, so that of
needed some driver-guru can implement a memory-mapping of mixer
or peak-meters over ioctl, or also to do only copying and no
conversion. A test-application shows the usage of the controller.
Latency Controls --- not implemented !!!
Note: Within the windows-driver the latency is accessible of a
control-panel, but buffer-sizes are controlled with ALSA from
hwparams-calls and should not be changed in run-state, I did not
implement it here.
System Clock -- suspended !!!!
Name -- "System Clock Mode"
Access -- Read Write
Values -- "Master" "Slave"
!!!! This is a hardware-function but is in conflict with the
Clock-source controller, which is a kind of ALSA-standard. I
makes sense to set the card to a special mode (master at some
frequency or slave), since even not using an Audio-application
a studio should have working synchronisations setup. So use
Clock-source-controller instead !!!!
Clock Source
Name -- "Sample Clock Source"
Access -- Read Write
Values -- "AutoSync", "Internal 32.0 kHz", "Internal 44.1 kHz",
"Internal 48.0 kHz", "Internal 64.0 kHz", "Internal 88.2 kHz",
"Internal 96.0 kHz"
Choose between Master at a specific Frequency and so also the
Speed-mode or Slave (Autosync). Also see "Preferred Sync Ref"
!!!! This is no pure hardware function but was implemented by
ALSA by some ALSA-drivers before, so I use it also. !!!
Preferred Sync Ref
Name -- "Preferred Sync Reference"
Access -- Read Write
Values -- "Word" "MADI"
Within the Auto-sync-Mode the preferred Sync Source can be
chosen. If it is not available another is used if possible.
Note: Since MADI has a much higher bit-rate than word-clock, the
card should synchronise better in MADI Mode. But since the
RME-PLL is very good, there are almost no problems with
word-clock too. I never found a difference.
TX 64 channel ---
Name -- "TX 64 channels mode"
Access -- Read Write
Values -- 0 1
Using 64-channel-modus (1) or 56-channel-modus for
MADI-transmission (0).
Note: This control is for output only. Input-mode is detected
automatically from hardware sending MADI.
Clear TMS ---
Name -- "Clear Track Marker"
Access -- Read Write
Values -- 0 1
Don't use to lower 5 Audio-bits on AES as additional Bits.
Safe Mode oder Auto Input ---
Name -- "Safe Mode"
Access -- Read Write
Values -- 0 1
(default on)
If on (1), then if either the optical or coaxial connection
has a failure, there is a takeover to the working one, with no
sample failure. Its only useful if you use the second as a
backup connection.
Input ---
Name -- "Input Select"
Access -- Read Write
Values -- optical coaxial
Choosing the Input, optical or coaxial. If Safe-mode is active,
this is the preferred Input.
-------------- Mixer ----------------------
Mixer
Name -- "Mixer"
Access -- Read Write
Values - <channel-number 0-127> <Value 0-65535>
Here as a first value the channel-index is taken to get/set the
corresponding mixer channel, where 0-63 are the input to output
fader and 64-127 the playback to outputs fader. Value 0
is channel muted 0 and 32768 an amplification of 1.
Chn 1-64
fast mixer for the ALSA-mixer utils. The diagonal of the
mixer-matrix is implemented from playback to output.
Line Out
Name -- "Line Out"
Access -- Read Write
Values -- 0 1
Switching on and off the analog out, which has nothing to do
with mixing or routing. the analog outs reflects channel 63,64.
--- information (only read access):
Sample Rate
Name -- "System Sample Rate"
Access -- Read-only
getting the sample rate.
External Rate measured
Name -- "External Rate"
Access -- Read only
Should be "Autosync Rate", but Name used is
ALSA-Scheme. External Sample frequency liked used on Autosync is
reported.
MADI Sync Status
Name -- "MADI Sync Lock Status"
Access -- Read
Values -- 0,1,2
MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced.
Word Clock Sync Status
Name -- "Word Clock Lock Status"
Access -- Read
Values -- 0,1,2
Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced.
AutoSync
Name -- "AutoSync Reference"
Access -- Read
Values -- "WordClock", "MADI", "None"
Sync-Reference is either "WordClock", "MADI" or none.
RX 64ch --- noch nicht implementiert
MADI-Receiver is in 64 channel mode oder 56 channel mode.
AB_inp --- not tested
Used input for Auto-Input.
actual Buffer Position --- not implemented
!!! this is a ALSA internal function, so no control is used !!!
Calling Parameter:
index int array (min = 1, max = 8),
"Index value for RME HDSPM interface." card-index within ALSA
note: ALSA-standard
id string array (min = 1, max = 8),
"ID string for RME HDSPM interface."
note: ALSA-standard
enable int array (min = 1, max = 8),
"Enable/disable specific HDSPM sound-cards."
note: ALSA-standard
precise_ptr int array (min = 1, max = 8),
"Enable precise pointer, or disable."
note: Use only when the application supports this (which is a special case).
line_outs_monitor int array (min = 1, max = 8),
"Send playback streams to analog outs by default."
note: each playback channel is mixed to the same numbered output
channel (routed). This is against the ALSA-convention, where all
channels have to be muted on after loading the driver, but was
used before on other cards, so i historically use it again)
enable_monitor int array (min = 1, max = 8),
"Enable Analog Out on Channel 63/64 by default."
note: here the analog output is enabled (but not routed).