Merge branch 'orion/cleanup' into orion/dt

Merge in the cleanups that should have been used as the base of the DT
branch instead of letting the conflicts be exposed all the way up to
the toplevel merges.

All of these are caused by cleanups being done both in the cleanup branch
and the dt branch, resulting in remove/remove conflicts of header files.

By Andrew Lunn (3) and others
via Jason Cooper
* orion/cleanup:
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes

Remove/remove conflicts in:
	arch/arm/mach-kirkwood/board-dockstar.c
	arch/arm/mach-kirkwood/board-goflexnet.c
	arch/arm/mach-kirkwood/board-lsxl.c

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2012-11-26 01:26:14 -08:00
commit 52cfa7e54b
23 changed files with 39 additions and 120 deletions

View File

@ -16,20 +16,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
static struct mv643xx_eth_platform_data dockstar_ge00_data = {

View File

@ -13,23 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/gpio.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"

View File

@ -26,7 +26,7 @@ static struct of_device_id kirkwood_dt_match_table[] __initdata = {
{ }
};
struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
NULL),
@ -119,7 +119,7 @@ static void __init kirkwood_dt_init(void)
kirkwood_auxdata_lookup, NULL);
}
static const char *kirkwood_dt_board_compat[] = {
static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"dlink,dns-320",
"dlink,dns-325",

View File

@ -18,20 +18,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
static struct mv643xx_eth_platform_data goflexnet_ge00_data = {

View File

@ -13,14 +13,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/input.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {

View File

@ -10,16 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {

View File

@ -10,10 +10,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {

View File

@ -14,10 +14,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/mv643xx_eth.h>
#include "common.h"

View File

@ -19,9 +19,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>

View File

@ -18,10 +18,10 @@
#include <linux/clk-provider.h>
#include <linux/spinlock.h>
#include <linux/mv643xx_i2c.h>
#include <linux/timex.h>
#include <linux/kexec.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/timex.h>
#include <asm/kexec.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
@ -426,7 +426,7 @@ void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
/*****************************************************************************
* SPI
****************************************************************************/
void __init kirkwood_spi_init()
void __init kirkwood_spi_init(void)
{
orion_spi_init(SPI_PHYS_BASE);
}
@ -647,8 +647,7 @@ void __init kirkwood_l2_init(void)
void __init kirkwood_init(void)
{
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
kirkwood_id(), kirkwood_tclk);
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
@ -672,7 +671,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
#ifdef CONFIG_KEXEC
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
}

View File

@ -47,7 +47,8 @@ void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
int (*dev_ready)(struct mtd_info *));
void kirkwood_audio_init(void);
void kirkwood_restart(char, const char *);
void kirkwood_clk_init(void);

View File

@ -64,7 +64,7 @@ static int kirkwood_init_cpuidle(void)
cpuidle_register_driver(&kirkwood_idle_driver);
if (cpuidle_register_device(device)) {
printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
pr_err("kirkwood_init_cpuidle: Failed registering\n");
return -EIO;
}
return 0;

View File

@ -93,7 +93,7 @@ static void __init dockstar_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);

View File

@ -14,6 +14,7 @@
#include <mach/bridge-regs.h>
#include <plat/orion-gpio.h>
#include <plat/irq.h>
#include "common.h"
static int __initdata gpio0_irqs[4] = {
IRQ_KIRKWOOD_GPIO_LOW_0_7,

View File

@ -19,6 +19,7 @@
#include <mach/irqs.h>
#include <plat/time.h>
#include "common.h"
#include "lacie_v2-common.h"
/*****************************************************************************
* 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)

View File

@ -30,8 +30,8 @@ static unsigned int __init kirkwood_variant(void)
if (dev == MV88F6180_DEV_ID)
return MPP_F6180_MASK;
printk(KERN_ERR "MPP setup: unknown kirkwood variant "
"(dev %#x rev %#x)\n", dev, rev);
pr_err("MPP setup: unknown kirkwood variant (dev %#x rev %#x)\n",
dev, rev);
return 0;
}

View File

@ -79,7 +79,7 @@ static struct platform_device netspace_v2_gpio_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &netspace_v2_button_data,
.platform_data = &netspace_v2_button_data,
},
};
@ -211,7 +211,7 @@ static unsigned int netspace_v2_mpp_config[] __initdata = {
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};

View File

@ -121,14 +121,12 @@ static int __init uart1_mpp_config(void)
kirkwood_mpp_conf(openrd_uart1_mpp_config);
if (gpio_request(34, "SD_UART1_SEL")) {
printk(KERN_ERR "GPIO request failed for SD/UART1 selection"
", gpio: 34\n");
pr_err("GPIO request 34 failed for SD/UART1 selection\n");
return -EIO;
}
if (gpio_request(28, "RS232_RS485_SEL")) {
printk(KERN_ERR "GPIO request failed for RS232/RS485 selection"
", gpio# 28\n");
pr_err("GPIO request 28 failed for RS232/RS485 selection\n");
gpio_free(34);
return -EIO;
}
@ -185,15 +183,13 @@ static void __init openrd_init(void)
if (uart1 <= 0) {
if (uart1 < 0)
printk(KERN_ERR "Invalid kernel parameter to select "
"UART1. Defaulting to SD. ERROR CODE: %d\n",
uart1);
pr_err("Invalid kernel parameter to select UART1. Defaulting to SD. ERROR CODE: %d\n",
uart1);
/* Select SD
* Pin # 34: 0 => UART1, 1 => SD */
if (gpio_request(34, "SD_UART1_SEL")) {
printk(KERN_ERR "GPIO request failed for SD/UART1 "
"selection, gpio: 34\n");
pr_err("GPIO request 34 failed for SD/UART1 selection\n");
} else {
gpio_direction_output(34, 1);

View File

@ -26,7 +26,7 @@ static void kirkwood_enable_pcie_clk(const char *port)
clk = clk_get_sys("pcie", port);
if (IS_ERR(clk)) {
printk(KERN_ERR "PCIE clock %s missing\n", port);
pr_err("PCIE clock %s missing\n", port);
return;
}
clk_prepare_enable(clk);
@ -168,7 +168,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
return 0;
index = pcie_port_map[nr];
printk(KERN_INFO "PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pr_info("PCI: bus%d uses PCIe port %d\n", sys->busnr, index);
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
if (!pp)
@ -186,7 +186,8 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
case 1:
kirkwood_enable_pcie_clk("1");
pcie1_ioresources_init(pp);
pci_ioremap_io(SZ_64K * sys->busnr, KIRKWOOD_PCIE1_IO_PHYS_BASE);
pci_ioremap_io(SZ_64K * sys->busnr,
KIRKWOOD_PCIE1_IO_PHYS_BASE);
break;
default:
panic("PCIe setup: invalid controller %d", index);
@ -224,22 +225,6 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
static struct pci_bus __init *
kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
if (nr < num_pcie_ports) {
bus = pci_scan_root_bus(NULL, sys->busnr, &pcie_ops, sys,
&sys->resources);
} else {
bus = NULL;
BUG();
}
return bus;
}
static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
@ -251,19 +236,19 @@ static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot,
static struct hw_pci kirkwood_pci __initdata = {
.setup = kirkwood_pcie_setup,
.scan = kirkwood_pcie_scan_bus,
.map_irq = kirkwood_pcie_map_irq,
.ops = &pcie_ops,
};
static void __init add_pcie_port(int index, void __iomem *base)
{
printk(KERN_INFO "Kirkwood PCIe port %d: ", index);
pr_info("Kirkwood PCIe port %d: ", index);
if (orion_pcie_link_up(base)) {
printk(KERN_INFO "link up\n");
pr_info("link up\n");
pcie_port_map[num_pcie_ports++] = index;
} else
printk(KERN_INFO "link down, ignoring\n");
pr_info("link down, ignoring\n");
}
void __init kirkwood_pcie_init(unsigned int portmask)

View File

@ -117,7 +117,7 @@ static void __init sheevaplug_init(void)
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);

View File

@ -29,7 +29,7 @@
#include "common.h"
#include "mpp.h"
struct mtd_partition hp_t5325_partitions[] = {
static struct mtd_partition hp_t5325_partitions[] = {
{
.name = "u-boot env",
.size = SZ_64K,
@ -59,14 +59,14 @@ struct mtd_partition hp_t5325_partitions[] = {
},
};
const struct flash_platform_data hp_t5325_flash = {
static const struct flash_platform_data hp_t5325_flash = {
.type = "mx25l8005",
.name = "spi_flash",
.parts = hp_t5325_partitions,
.nr_parts = ARRAY_SIZE(hp_t5325_partitions),
};
struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
static struct spi_board_info __initdata hp_t5325_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &hp_t5325_flash,

View File

@ -170,8 +170,7 @@ static int __init ts41x_pci_init(void)
else
kirkwood_pcie_init(KW_PCIE0);
}
return 0;
return 0;
}
subsys_initcall(ts41x_pci_init);

View File

@ -7,6 +7,7 @@
#include <linux/serial_reg.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "tsx1x-common.h"
/*
* QNAP TS-x1x Boards flash
@ -29,7 +30,7 @@
*
***************************************************************************/
struct mtd_partition qnap_tsx1x_partitions[] = {
static struct mtd_partition qnap_tsx1x_partitions[] = {
{
.name = "U-Boot",
.size = 0x00080000,
@ -58,14 +59,14 @@ struct mtd_partition qnap_tsx1x_partitions[] = {
},
};
const struct flash_platform_data qnap_tsx1x_flash = {
static const struct flash_platform_data qnap_tsx1x_flash = {
.type = "m25p128",
.name = "spi_flash",
.parts = qnap_tsx1x_partitions,
.nr_parts = ARRAY_SIZE(qnap_tsx1x_partitions),
};
struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
static struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &qnap_tsx1x_flash,