hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

sfc: Update MCDI protocol definitions 

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Ben Hutchings 2010-02-03 09:28:14 +00:00 committed by David S. Miller
parent 91e83432f8
commit 5297a98d5d
1 changed files with 179 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

202
drivers/net/sfc/mcdi_pcol.h
View File

@ -786,16 +786,18 @@
#define MC_CMD_GET_PHY_CFG_OUT_FLAGS_OFST 0
#define MC_CMD_GET_PHY_CFG_PRESENT_LBN 0
#define MC_CMD_GET_PHY_CFG_PRESENT_WIDTH 1
#define MC_CMD_GET_PHY_CFG_SHORTBIST_LBN 1
#define MC_CMD_GET_PHY_CFG_SHORTBIST_WIDTH 1
#define MC_CMD_GET_PHY_CFG_LONGBIST_LBN 2
#define MC_CMD_GET_PHY_CFG_LONGBIST_WIDTH 1
#define MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_LBN 1
#define MC_CMD_GET_PHY_CFG_BIST_CABLE_SHORT_WIDTH 1
#define MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_LBN 2
#define MC_CMD_GET_PHY_CFG_BIST_CABLE_LONG_WIDTH 1
#define MC_CMD_GET_PHY_CFG_LOWPOWER_LBN 3
#define MC_CMD_GET_PHY_CFG_LOWPOWER_WIDTH 1
#define MC_CMD_GET_PHY_CFG_POWEROFF_LBN 4
#define MC_CMD_GET_PHY_CFG_POWEROFF_WIDTH 1
#define MC_CMD_GET_PHY_CFG_TXDIS_LBN 5
#define MC_CMD_GET_PHY_CFG_TXDIS_WIDTH 1
#define MC_CMD_GET_PHY_CFG_BIST_LBN 6
#define MC_CMD_GET_PHY_CFG_BIST_WIDTH 1
#define MC_CMD_GET_PHY_CFG_OUT_TYPE_OFST 4
/* Bitmask of supported capabilities */
#define MC_CMD_GET_PHY_CFG_OUT_SUPPORTED_CAP_OFST 8
@ -832,7 +834,7 @@
#define MC_CMD_GET_PHY_CFG_OUT_REVISION_OFST 52
#define MC_CMD_GET_PHY_CFG_OUT_REVISION_LEN 20
/* MC_CMD_START_PHY_BIST:
/* MC_CMD_START_BIST:
* Start a BIST test on the PHY.
*
* Locks required: PHY_LOCK if doing a PHY BIST
@ -840,34 +842,71 @@
*/
#define MC_CMD_START_BIST 0x25
#define MC_CMD_START_BIST_IN_LEN 4
#define MC_CMD_START_BIST_TYPE_OFST 0
#define MC_CMD_START_BIST_IN_TYPE_OFST 0
#define MC_CMD_START_BIST_OUT_LEN 0
/* Run the PHY's short BIST */
#define MC_CMD_PHY_BIST_SHORT 1
/* Run the PHY's long BIST */
#define MC_CMD_PHY_BIST_LONG 2
/* Run the PHY's short cable BIST */
#define MC_CMD_PHY_BIST_CABLE_SHORT 1
/* Run the PHY's long cable BIST */
#define MC_CMD_PHY_BIST_CABLE_LONG 2
/* Run BIST on the currently selected BPX Serdes (XAUI or XFI) */
#define MC_CMD_BPX_SERDES_BIST 3
/* Run the MC loopback tests */
#define MC_CMD_MC_LOOPBACK_BIST 4
/* Run the PHY's standard BIST */
#define MC_CMD_PHY_BIST 5
/* MC_CMD_POLL_PHY_BIST: (variadic output)
* Poll for BIST completion
*
* Returns a single status code, and a binary blob of phy-specific
* bist output. If the driver can't succesfully parse the BIST output,
* it should still respect the Pass/Fail in OUT.RESULT.
* Returns a single status code, and optionally some PHY specific
* bist output. The driver should only consume the BIST output
* after validating OUTLEN and PHY_CFG.PHY_TYPE.
*
* Locks required: PHY_LOCK if doing a PHY BIST
* If a driver can't succesfully parse the BIST output, it should
* still respect the pass/Fail in OUT.RESULT
*
* Locks required: PHY_LOCK if doing a PHY BIST
* Return code: 0, EACCES (if PHY_LOCK is not held)
*/
#define MC_CMD_POLL_BIST 0x26
#define MC_CMD_POLL_BIST_IN_LEN 0
#define MC_CMD_POLL_BIST_OUT_LEN UNKNOWN
#define MC_CMD_POLL_BIST_OUT_SFT9001_LEN 40
#define MC_CMD_POLL_BIST_OUT_MRSFP_LEN 8
#define MC_CMD_POLL_BIST_OUT_RESULT_OFST 0
#define MC_CMD_POLL_BIST_RUNNING 1
#define MC_CMD_POLL_BIST_PASSED 2
#define MC_CMD_POLL_BIST_FAILED 3
#define MC_CMD_POLL_BIST_TIMEOUT 4
/* Generic: */
#define MC_CMD_POLL_BIST_OUT_PRIVATE_OFST 4
/* SFT9001-specific: */
/* (offset 4 unused?) */
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A_OFST 8
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_B_OFST 12
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_C_OFST 16
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_LENGTH_D_OFST 20
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_A_OFST 24
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_B_OFST 28
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_C_OFST 32
#define MC_CMD_POLL_BIST_OUT_SFT9001_CABLE_STATUS_D_OFST 36
#define MC_CMD_POLL_BIST_SFT9001_PAIR_OK 1
#define MC_CMD_POLL_BIST_SFT9001_PAIR_OPEN 2
#define MC_CMD_POLL_BIST_SFT9001_INTRA_PAIR_SHORT 3
#define MC_CMD_POLL_BIST_SFT9001_INTER_PAIR_SHORT 4
#define MC_CMD_POLL_BIST_SFT9001_PAIR_BUSY 9
/* mrsfp "PHY" driver: */
#define MC_CMD_POLL_BIST_OUT_MRSFP_TEST_OFST 4
#define MC_CMD_POLL_BIST_MRSFP_TEST_COMPLETE 0
#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_WRITE 1
#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_NO_ACCESS_IO_EXP 2
#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_OFF_I2C_NO_ACCESS_MODULE 3
#define MC_CMD_POLL_BIST_MRSFP_TEST_IO_EXP_I2C_CONFIGURE 4
#define MC_CMD_POLL_BIST_MRSFP_TEST_BUS_SWITCH_I2C_NO_CROSSTALK 5
#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_PRESENCE 6
#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_ID_I2C_ACCESS 7
#define MC_CMD_POLL_BIST_MRSFP_TEST_MODULE_ID_SANE_VALUE 8
/* MC_CMD_PHY_SPI: (variadic in, variadic out)
* Read/Write/Erase the PHY SPI device
@ -1206,6 +1245,13 @@
#define MC_CMD_WOL_FILTER_SET_IN_BITMAP_LAYER4_OFST \
(MC_CMD_WOL_FILTER_SET_IN_DATA_OFST + 178)
#define MC_CMD_WOL_FILTER_SET_IN_LINK_MASK_OFST \
MC_CMD_WOL_FILTER_SET_IN_DATA_OFST
#define MC_CMD_WOL_FILTER_SET_IN_LINK_UP_LBN 0
#define MC_CMD_WOL_FILTER_SET_IN_LINK_UP_WIDTH 1
#define MC_CMD_WOL_FILTER_SET_IN_LINK_DOWN_LBN 1
#define MC_CMD_WOL_FILTER_SET_IN_LINK_DOWN_WIDTH 1
#define MC_CMD_WOL_FILTER_SET_OUT_LEN 4
#define MC_CMD_WOL_FILTER_SET_OUT_FILTER_ID_OFST 0
@ -1216,7 +1262,8 @@
#define MC_CMD_WOL_TYPE_IPV4_SYN 0x3
#define MC_CMD_WOL_TYPE_IPV6_SYN 0x4
#define MC_CMD_WOL_TYPE_BITMAP 0x5
#define MC_CMD_WOL_TYPE_MAX 0x6
#define MC_CMD_WOL_TYPE_LINK 0x6
#define MC_CMD_WOL_TYPE_MAX 0x7
#define MC_CMD_FILTER_MODE_SIMPLE 0x0
#define MC_CMD_FILTER_MODE_STRUCTURED 0xffffffff
@ -1357,14 +1404,24 @@
* Returns: 0, EINVAL (bad type/offset/length), EACCES (if PHY_LOCK required and not held)
*/
#define MC_CMD_NVRAM_UPDATE_FINISH 0x3c
#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 4
#define MC_CMD_NVRAM_UPDATE_FINISH_IN_LEN 8
#define MC_CMD_NVRAM_UPDATE_FINISH_IN_TYPE_OFST 0
#define MC_CMD_NVRAM_UPDATE_FINISH_IN_REBOOT_OFST 4
#define MC_CMD_NVRAM_UPDATE_FINISH_OUT_LEN 0
/* MC_CMD_REBOOT:
* Reboot the MC. The AFTER_ASSERTION flag is intended to be used
* when the driver notices an assertion failure, to allow two ports to
* both recover (semi-)gracefully.
* Reboot the MC.
*
* The AFTER_ASSERTION flag is intended to be used when the driver notices
* an assertion failure (at which point it is expected to perform a complete
* tear down and reinitialise), to allow both ports to reset the MC once
* in an atomic fashion.
*
* Production mc firmwares are generally compiled with REBOOT_ON_ASSERT=1,
* which means that they will automatically reboot out of the assertion
* handler, so this is in practise an optional operation. It is still
* recommended that drivers execute this to support custom firmwares
* with REBOOT_ON_ASSERT=0.
*
* Locks required: NONE
* Returns: Nothing. You get back a response with ERR=1, DATALEN=0
@ -1469,11 +1526,10 @@
((_ofst) + 6)
/* MC_CMD_READ_SENSORS
* Returns the current (value, state) for each sensor
* Returns the current reading from each sensor
*
* Returns the current (value, state) [each 16bit] of each sensor supported by
* this board, by DMA'ing a sparse array (indexed by the sensor type) into host
* memory.
* Returns a sparse array of sensor readings (indexed by the sensor
* type) into host memory. Each array element is a dword.
*
* The MC will send a SENSOREVT event every time any sensor changes state. The
* driver is responsible for ensuring that it doesn't miss any events. The board
@ -1486,6 +1542,12 @@
#define MC_CMD_READ_SENSORS_IN_DMA_ADDR_HI_OFST 4
#define MC_CMD_READ_SENSORS_OUT_LEN 0
/* Sensor reading fields */
#define MC_CMD_READ_SENSOR_VALUE_LBN 0
#define MC_CMD_READ_SENSOR_VALUE_WIDTH 16
#define MC_CMD_READ_SENSOR_STATE_LBN 16
#define MC_CMD_READ_SENSOR_STATE_WIDTH 8
/* MC_CMD_GET_PHY_STATE:
* Report current state of PHY. A "zombie" PHY is a PHY that has failed to
@ -1577,4 +1639,98 @@
#define MC_CMD_MAC_RESET_RESTORE_IN_LEN 0
#define MC_CMD_MAC_RESET_RESTORE_OUT_LEN 0
/* MC_CMD_TEST_ASSERT:
* Deliberately trigger an assert-detonation in the firmware for testing
* purposes (i.e. to allow tests that the driver copes gracefully).
*
* Locks required: None
* Returns: 0
*/
#define MC_CMD_TESTASSERT 0x49
#define MC_CMD_TESTASSERT_IN_LEN 0
#define MC_CMD_TESTASSERT_OUT_LEN 0
/* MC_CMD_WORKAROUND 0x4a
*
* Enable/Disable a given workaround. The mcfw will return EINVAL if it
* doesn't understand the given workaround number - which should not
* be treated as a hard error by client code.
*
* This op does not imply any semantics about each workaround, that's between
* the driver and the mcfw on a per-workaround basis.
*
* Locks required: None
* Returns: 0, EINVAL
*/
#define MC_CMD_WORKAROUND 0x4a
#define MC_CMD_WORKAROUND_IN_LEN 8
#define MC_CMD_WORKAROUND_IN_TYPE_OFST 0
#define MC_CMD_WORKAROUND_BUG17230 1
#define MC_CMD_WORKAROUND_IN_ENABLED_OFST 4
#define MC_CMD_WORKAROUND_OUT_LEN 0
/* MC_CMD_GET_PHY_MEDIA_INFO:
* Read media-specific data from PHY (e.g. SFP/SFP+ module ID information for
* SFP+ PHYs).
*
* The "media type" can be found via GET_PHY_CFG (GET_PHY_CFG_OUT_MEDIA_TYPE);
* the valid "page number" input values, and the output data, are interpreted
* on a per-type basis.
*
* For SFP+: PAGE=0 or 1 returns a 128-byte block read from module I2C address
* 0xA0 offset 0 or 0x80.
* Anything else: currently undefined.
*
* Locks required: None
* Return code: 0
*/
#define MC_CMD_GET_PHY_MEDIA_INFO 0x4b
#define MC_CMD_GET_PHY_MEDIA_INFO_IN_LEN 4
#define MC_CMD_GET_PHY_MEDIA_INFO_IN_PAGE_OFST 0
#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LEN(_num_bytes) (4 + (_num_bytes))
#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATALEN_OFST 0
#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_OFST 4
/* MC_CMD_NVRAM_TEST:
* Test a particular NVRAM partition for valid contents (where "valid"
* depends on the type of partition).
*
* Locks required: None
* Return code: 0
*/
#define MC_CMD_NVRAM_TEST 0x4c
#define MC_CMD_NVRAM_TEST_IN_LEN 4
#define MC_CMD_NVRAM_TEST_IN_TYPE_OFST 0
#define MC_CMD_NVRAM_TEST_OUT_LEN 4
#define MC_CMD_NVRAM_TEST_OUT_RESULT_OFST 0
#define MC_CMD_NVRAM_TEST_PASS 0
#define MC_CMD_NVRAM_TEST_FAIL 1
#define MC_CMD_NVRAM_TEST_NOTSUPP 2
/* MC_CMD_MRSFP_TWEAK: (debug)
* Read status and/or set parameters for the "mrsfp" driver in mr_rusty builds.
* I2C I/O expander bits are always read; if equaliser parameters are supplied,
* they are configured first.
*
* Locks required: None
* Return code: 0, EINVAL
*/
#define MC_CMD_MRSFP_TWEAK 0x4d
#define MC_CMD_MRSFP_TWEAK_IN_LEN_READ_ONLY 0
#define MC_CMD_MRSFP_TWEAK_IN_LEN_EQ_CONFIG 16
#define MC_CMD_MRSFP_TWEAK_IN_TXEQ_LEVEL_OFST 0 /* 0-6 low->high de-emph. */
#define MC_CMD_MRSFP_TWEAK_IN_TXEQ_DT_CFG_OFST 4 /* 0-8 low->high ref.V */
#define MC_CMD_MRSFP_TWEAK_IN_RXEQ_BOOST_OFST 8 /* 0-8 low->high boost */
#define MC_CMD_MRSFP_TWEAK_IN_RXEQ_DT_CFG_OFST 12 /* 0-8 low->high ref.V */
#define MC_CMD_MRSFP_TWEAK_OUT_LEN 12
#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_INPUTS_OFST 0 /* input bits */
#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_OUTPUTS_OFST 4 /* output bits */
#define MC_CMD_MRSFP_TWEAK_OUT_IOEXP_DIRECTION_OFST 8 /* dirs: 0=out, 1=in */
/* Do NOT add new commands beyond 0x4f as part of 3.0 : 0x50 - 0x7f will be
* used for post-3.0 extensions. If you run out of space, look for gaps or
* commands that are unused in the existing range. */
#endif /* MCDI_PCOL_H */