Merge branch 'tip/rtmutex' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into core/locking

*git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace tip/rtmutex:
   rtmutex: Simplify PI algorithm and make highest prio task get lock

.mailmap

@@ -23,6 +23,7 @@ Andy Adamson <andros@citi.umich.edu>
 Arnaud Patard <arnaud.patard@rtp-net.org>
 Arnd Bergmann <arnd@arndb.de>
 Axel Dyks <xl@xlsigned.net>
+Axel Lin <axel.lin@gmail.com>
 Ben Gardner <bgardner@wabtec.com>
 Ben M Cahill <ben.m.cahill@intel.com>
 Björn Steinbrink <B.Steinbrink@gmx.de>

Documentation/DocBook/device-drivers.tmpl

@@ -217,8 +217,8 @@ X!Isound/sound_firmware.c
   <chapter id="uart16x50">
      <title>16x50 UART Driver</title>
 !Iinclude/linux/serial_core.h
-!Edrivers/serial/serial_core.c
+!Edrivers/tty/serial/serial_core.c
-!Edrivers/serial/8250.c
+!Edrivers/tty/serial/8250.c
   </chapter>
 
   <chapter id="fbdev">

Documentation/kernel-parameters.txt

@@ -43,11 +43,11 @@ parameter is applicable:
 	AVR32	AVR32 architecture is enabled.
 	AX25	Appropriate AX.25 support is enabled.
 	BLACKFIN Blackfin architecture is enabled.
+	DRM	Direct Rendering Management support is enabled.
+	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	EDD	BIOS Enhanced Disk Drive Services (EDD) is enabled
 	EFI	EFI Partitioning (GPT) is enabled
 	EIDE	EIDE/ATAPI support is enabled.
-	DRM	Direct Rendering Management support is enabled.
-	DYNAMIC_DEBUG Build in debug messages and enable them at runtime
 	FB	The frame buffer device is enabled.
 	GCOV	GCOV profiling is enabled.
 	HW	Appropriate hardware is enabled.

MAINTAINERS

@@ -3674,6 +3674,28 @@ F:	include/linux/key-type.h
 F:	include/keys/
 F:	security/keys/
 
+KEYS-TRUSTED
+M:	David Safford <safford@watson.ibm.com>
+M:	Mimi Zohar <zohar@us.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/trusted-type.h
+F:	security/keys/trusted.c
+F:	security/keys/trusted.h
+
+KEYS-ENCRYPTED
+M:	Mimi Zohar <zohar@us.ibm.com>
+M:	David Safford <safford@watson.ibm.com>
+L:	linux-security-module@vger.kernel.org
+L:	keyrings@linux-nfs.org
+S:	Supported
+F:	Documentation/keys-trusted-encrypted.txt
+F:	include/keys/encrypted-type.h
+F:	security/keys/encrypted.c
+F:	security/keys/encrypted.h
+
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 W:	http://kgdb.wiki.kernel.org/

arch/arm/include/asm/hardware/sp810.h

@@ -50,6 +50,12 @@
 #define SCPCELLID2		0xFF8
 #define SCPCELLID3		0xFFC
 
+#define SCCTRL_TIMEREN0SEL_REFCLK	(0 << 15)
+#define SCCTRL_TIMEREN0SEL_TIMCLK	(1 << 15)
+
+#define SCCTRL_TIMEREN1SEL_REFCLK	(0 << 17)
+#define SCCTRL_TIMEREN1SEL_TIMCLK	(1 << 17)
+
 static inline void sysctl_soft_reset(void __iomem *base)
 {
 	/* writing any value to SCSYSSTAT reg will reset system */

arch/arm/include/asm/memory.h

@@ -188,7 +188,7 @@
  * translation for translating DMA addresses.  Use the driver
  * DMA support - see dma-mapping.h.
  */
-static inline unsigned long virt_to_phys(void *x)
+static inline unsigned long virt_to_phys(const volatile void *x)
 {
 	return __virt_to_phys((unsigned long)(x));
 }

arch/arm/kernel/smp_twd.c

@@ -36,6 +36,7 @@ static void twd_set_mode(enum clock_event_mode mode,
 		/* timer load already set up */
 		ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
 			| TWD_TIMER_CONTROL_PERIODIC;
+		__raw_writel(twd_timer_rate / HZ, twd_base + TWD_TIMER_LOAD);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* period set, and timer enabled in 'next_event' hook */
@@ -81,7 +82,7 @@ int twd_timer_ack(void)
 
 static void __cpuinit twd_calibrate_rate(void)
 {
-	unsigned long load, count;
+	unsigned long count;
 	u64 waitjiffies;
 
 	/*
@@ -116,10 +117,6 @@ static void __cpuinit twd_calibrate_rate(void)
 		printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
 			(twd_timer_rate / 1000000) % 100);
 	}
-
-	load = twd_timer_rate / HZ;
-
-	__raw_writel(load, twd_base + TWD_TIMER_LOAD);
 }
 
 /*

arch/arm/mach-ep93xx/gpio.c

@@ -427,6 +427,13 @@ void __init ep93xx_gpio_init(void)
 {
 	int i;
 
+	/* Set Ports C, D, E, G, and H for GPIO use */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+				 EP93XX_SYSCON_DEVCFG_GONK |
+				 EP93XX_SYSCON_DEVCFG_EONIDE |
+				 EP93XX_SYSCON_DEVCFG_GONIDE |
+				 EP93XX_SYSCON_DEVCFG_HONIDE);
+
 	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
 		gpiochip_add(&ep93xx_gpio_banks[i].chip);
 }

arch/arm/mach-omap1/Kconfig

@@ -9,6 +9,7 @@ config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
 	select CPU_ARM926T
+	select OMAP_MPU_TIMER
 	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
@@ -22,6 +23,7 @@ config ARCH_OMAP15XX
 	default y
 	bool "OMAP15xx Based System"
 	select CPU_ARM925T
+	select OMAP_MPU_TIMER
 
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1

arch/arm/mach-omap1/Makefile

@@ -3,12 +3,11 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
+obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
 obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management

arch/arm/mach-omap1/time.c

@@ -44,16 +44,21 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
+#include <asm/sched_clock.h>
+
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 #include <plat/common.h>
 
+#ifdef CONFIG_OMAP_MPU_TIMER
+
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
@@ -67,7 +72,7 @@ typedef struct {
 ((volatile omap_mpu_timer_regs_t*)OMAP1_IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
 				 (n)*OMAP_MPU_TIMER_OFFSET))
 
-static inline unsigned long omap_mpu_timer_read(int nr)
+static inline unsigned long notrace omap_mpu_timer_read(int nr)
 {
 	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
 	return timer->read_tim;
@@ -212,6 +217,32 @@ static struct clocksource clocksource_mpu = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+
+static inline unsigned long long notrace _omap_mpu_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+#ifndef CONFIG_OMAP_32K_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#else
+static unsigned long long notrace omap_mpu_sched_clock(void)
+{
+	return _omap_mpu_sched_clock();
+}
+#endif
+
+static void notrace mpu_update_sched_clock(void)
+{
+	u32 cyc = mpu_read(&clocksource_mpu);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 static void __init omap_init_clocksource(unsigned long rate)
 {
 	static char err[] __initdata = KERN_ERR
@@ -219,17 +250,13 @@ static void __init omap_init_clocksource(unsigned long rate)
 
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
 	omap_mpu_timer_start(1, ~0, 1);
+	init_sched_clock(&cd, mpu_update_sched_clock, 32, rate);
 
 	if (clocksource_register_hz(&clocksource_mpu, rate))
 		printk(err, clocksource_mpu.name);
 }
 
-/*
+static void __init omap_mpu_timer_init(void)
- * ---------------------------------------------------------------------------
- * Timer initialization
- * ---------------------------------------------------------------------------
- */
-static void __init omap_timer_init(void)
 {
 	struct clk	*ck_ref = clk_get(NULL, "ck_ref");
 	unsigned long	rate;
@@ -246,6 +273,66 @@ static void __init omap_timer_init(void)
 	omap_init_clocksource(rate);
 }
 
+#else
+static inline void omap_mpu_timer_init(void)
+{
+	pr_err("Bogus timer, should not happen\n");
+}
+#endif	/* CONFIG_OMAP_MPU_TIMER */
+
+#if defined(CONFIG_OMAP_MPU_TIMER) && defined(CONFIG_OMAP_32K_TIMER)
+static unsigned long long (*preferred_sched_clock)(void);
+
+unsigned long long notrace sched_clock(void)
+{
+	if (!preferred_sched_clock)
+		return 0;
+
+	return preferred_sched_clock();
+}
+
+static inline void preferred_sched_clock_init(bool use_32k_sched_clock)
+{
+	if (use_32k_sched_clock)
+		preferred_sched_clock = omap_32k_sched_clock;
+	else
+		preferred_sched_clock = omap_mpu_sched_clock;
+}
+#else
+static inline void preferred_sched_clock_init(bool use_32k_sched_clcok)
+{
+}
+#endif
+
+static inline int omap_32k_timer_usable(void)
+{
+	int res = false;
+
+	if (cpu_is_omap730() || cpu_is_omap15xx())
+		return res;
+
+#ifdef CONFIG_OMAP_32K_TIMER
+	res = omap_32k_timer_init();
+#endif
+
+	return res;
+}
+
+/*
+ * ---------------------------------------------------------------------------
+ * Timer initialization
+ * ---------------------------------------------------------------------------
+ */
+static void __init omap_timer_init(void)
+{
+	if (omap_32k_timer_usable()) {
+		preferred_sched_clock_init(1);
+	} else {
+		omap_mpu_timer_init();
+		preferred_sched_clock_init(0);
+	}
+}
+
 struct sys_timer omap_timer = {
 	.init		= omap_timer_init,
 };

arch/arm/mach-omap1/timer32k.c

@@ -52,10 +52,9 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <plat/common.h>
 #include <plat/dmtimer.h>
 
-struct sys_timer omap_timer;
-
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer
@@ -181,14 +180,14 @@ static __init void omap_init_32k_timer(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap_timer_init(void)
+bool __init omap_32k_timer_init(void)
 {
+	omap_init_clocksource_32k();
+
 #ifdef CONFIG_OMAP_DM_TIMER
 	omap_dm_timer_init();
 #endif
 	omap_init_32k_timer();
-}
 
-struct sys_timer omap_timer = {
+	return true;
-	.init		= omap_timer_init,
+}
-};

arch/arm/mach-omap2/board-cm-t3517.c

@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 #define RTC_IO_GPIO		(153)
 #define RTC_WR_GPIO		(154)
-#define RTC_RD_GPIO		(160)
+#define RTC_RD_GPIO		(53)
 #define RTC_CS_GPIO		(163)
+#define RTC_CS_EN_GPIO		(160)
 
 struct v3020_platform_data cm_t3517_v3020_pdata = {
 	.use_gpio	= 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
 
 static void __init cm_t3517_init_rtc(void)
 {
+	int err;
+
+	err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+	if (err) {
+		pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+		return;
+	}
+
+	gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
 	platform_device_register(&cm_t3517_rtc_device);
 }
 #else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
 	},
 	{
 		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x2A0000 */
 		.size           = 32 * NAND_BLOCK_SIZE,
 	},
 	{
 		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x6A0000 */
 		.size           = MTDPART_SIZ_FULL,
 	},
 };
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
 static struct omap_board_mux board_mux[] __initdata = {
 	/* GPIO186 - Green LED */
 	OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* RTC GPIOs: IO, WR#, RD#, CS# */
+
+	/* RTC GPIOs: */
+	/* IO - GPIO153 */
 	OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* WR# - GPIO154 */
 	OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* RD# - GPIO53 */
+	OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS# - GPIO163 */
 	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+	/* CS EN - GPIO160 */
+	OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
 	/* HSUSB1 RESET */
 	OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
 	/* HSUSB2 RESET */

arch/arm/mach-omap2/board-devkit8000.c

@@ -275,8 +275,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
 	.irq_base	= TWL4030_GPIO_IRQ_BASE,
 	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
-	.pullups	= BIT(1),
+	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
-	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
 	.setup		= devkit8000_twl_gpio_setup,
 };

arch/arm/mach-omap2/clock44xx_data.c

@@ -34,7 +34,6 @@
 #include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
-#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
 #include "scrm44xx.h"

arch/arm/mach-omap2/clockdomain.c

@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 {
 	struct clkdm_dep *cd;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	if (!clkdm1 || !clkdm2)
 		return -EINVAL;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+		       clkdm1->name, clkdm2->name, __func__);
+		return -EINVAL;
+	}
+
 	cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
 	if (IS_ERR(cd)) {
 		pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 	struct clkdm_dep *cd;
 	u32 mask = 0;
 
+	if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+		pr_err("clockdomain: %s: %s: not yet implemented\n",
+		       clkdm->name, __func__);
+		return -EINVAL;
+	}
+
 	if (!clkdm)
 		return -EINVAL;
 
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
-			  "support is not yet implemented\n");
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	 * dependency code and data for OMAP4.
 	 */
 	if (cpu_is_omap44xx()) {
-		WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
+		pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
-			  "support is not yet implemented\n");
 	} else {
 		if (atomic_read(&clkdm->usecount) > 0)
 			_clkdm_del_autodeps(clkdm);

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -30,8 +30,6 @@
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
 #include "prm44xx.h"
 #include "prcm44xx.h"

arch/arm/mach-omap2/pm24xx.c

@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
 
 	/* Block console output in case it is on one of the OMAP UARTs */
 	if (!is_suspending())
-		if (try_acquire_console_sem())
+		if (!console_trylock())
 			goto no_sleep;
 
 	omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(0);
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 no_sleep:
 	if (omap2_pm_debug) {

arch/arm/mach-omap2/pm34xx.c

@@ -398,7 +398,7 @@ void omap_sram_idle(void)
 	if (!is_suspending())
 		if (per_next_state < PWRDM_POWER_ON ||
 		    core_next_state < PWRDM_POWER_ON)
-			if (try_acquire_console_sem())
+			if (!console_trylock())
 				goto console_still_active;
 
 	/* PER */
@@ -481,7 +481,7 @@ void omap_sram_idle(void)
 	}
 
 	if (!is_suspending())
-		release_console_sem();
+		console_unlock();
 
 console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */

arch/arm/mach-omap2/powerdomain2xxx_3xxx.c

@@ -19,7 +19,6 @@
 #include <plat/prcm.h>
 
 #include "powerdomain.h"
-#include "prm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"

arch/arm/mach-omap2/serial.c

@@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 
 	oh->dev_attr = uart;
 
-	acquire_console_sem(); /* in case the earlycon is on the UART */
+	console_lock(); /* in case the earlycon is on the UART */
 
 	/*
 	 * Because of early UART probing, UART did not get idled
@@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
-	release_console_sem();
+	console_unlock();
 
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {

arch/arm/mach-omap2/timer-gp.c

@@ -42,6 +42,8 @@
 
 #include "timer-gp.h"
 
+#include <plat/common.h>
+
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
 #define MAX_GPTIMER_ID		12
 
@@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void)
 /* 
  * When 32k-timer is enabled, don't use GPTimer for clocksource
  * instead, just leave default clocksource which uses the 32k
- * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ * sync counter.  See clocksource setup in plat-omap/counter_32k.c
  */
 
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+	omap_init_clocksource_32k();
+}
+
 #else
 /*
  * clocksource

arch/arm/mach-realview/Kconfig

@@ -2,52 +2,56 @@ menu "RealView platform type"
 	depends on ARCH_REALVIEW
 
 config MACH_REALVIEW_EB
-	bool "Support RealView/EB platform"
+	bool "Support RealView(R) Emulation Baseboard"
 	select ARM_GIC
 	help
-	  Include support for the ARM(R) RealView Emulation Baseboard platform.
+	  Include support for the ARM(R) RealView(R) Emulation Baseboard
+	  platform.
 
 config REALVIEW_EB_A9MP
-	bool "Support Multicore Cortex-A9"
+	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V7
 	help
-	  Enable support for the Cortex-A9MPCore tile on the Realview platform.
+	  Enable support for the Cortex-A9MPCore tile fitted to the
+	  Realview(R) Emulation Baseboard platform.
 
 config REALVIEW_EB_ARM11MP
-	bool "Support ARM11MPCore tile"
+	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
 	select CPU_V6
 	select ARCH_HAS_BARRIERS if SMP
 	help
-	  Enable support for the ARM11MPCore tile on the Realview platform.
+	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
+	  Emulation Baseboard platform.
 
 config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB tile"
+	bool "Support ARM11MPCore RevB Tile"
 	depends on REALVIEW_EB_ARM11MP
 	help
-	  Enable support for the ARM11MPCore RevB tile on the Realview
+	  Enable support for the ARM11MPCore Revision B tile on the
-	  platform. Since there are device address differences, a
+	  Realview(R) Emulation Baseboard platform. Since there are device
-	  kernel built with this option enabled is not compatible with
+	  address differences, a kernel built with this option enabled is
-	  other revisions of the ARM11MPCore tile.
+	  not compatible with other revisions of the ARM11MPCore tile.
 
 config MACH_REALVIEW_PB11MP
-	bool "Support RealView/PB11MPCore platform"
+	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	select CPU_V6
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_HAS_BARRIERS if SMP
 	help
-	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
-	  PB11MPCore is a platform with an on-board ARM11MPCore and has
+	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
 	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PB1176
-	bool "Support RealView/PB1176 platform"
+	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	select CPU_V6
 	select ARM_GIC
 	help
-	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard for
+	  ARM1176JZF-S.
 
 config REALVIEW_PB1176_SECURE_FLASH
 	bool "Allow access to the secure flash memory block"
@@ -59,23 +63,24 @@ config REALVIEW_PB1176_SECURE_FLASH
 	  block (64MB @ 0x3c000000) is required.
 
 config MACH_REALVIEW_PBA8
-	bool "Support RealView/PB-A8 platform"
+	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	help
-	  Include support for the ARM(R) RealView Cortex-A8 Platform Baseboard.
+	  Include support for the ARM(R) RealView Platform Baseboard for
-	  PB-A8 is a platform with an on-board Cortex-A8 and has support for
+	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
-	  PCI-E and Compact Flash.
+	  support for PCI-E and Compact Flash.
 
 config MACH_REALVIEW_PBX
-	bool "Support RealView/PBX platform"
+	bool "Support RealView(R) Platform Baseboard Explore"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
-	  Include support for the ARM(R) RealView PBX platform.
+	  Include support for the ARM(R) RealView(R) Platform Baseboard
+	  Explore.
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"

arch/arm/mach-realview/platsmp.c

@@ -41,7 +41,7 @@ volatile int __cpuinitdata pen_release = -1;
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
  */
-static void write_pen_release(int val)
+static void __cpuinit write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();

arch/arm/mach-shmobile/Kconfig

@@ -60,6 +60,8 @@ endchoice
 
 config MACH_AG5EVM
 	bool "AG5EVM board"
+	select ARCH_REQUIRE_GPIOLIB
+	select SH_LCD_MIPI_DSI
 	depends on ARCH_SH73A0
 
 config MACH_MACKEREL

arch/arm/mach-shmobile/board-ag5evm.c

@@ -34,9 +34,10 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
-
+#include <linux/sh_clk.h>
+#include <video/sh_mobile_lcdc.h>
+#include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
-
 #include <mach/hardware.h>
 #include <mach/sh73a0.h>
 #include <mach/common.h>
@@ -183,11 +184,165 @@ static struct platform_device mmc_device = {
 	.resource	= sh_mmcif_resources,
 };
 
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.start	= 0xE6D00000,
+		.end	= 0xE6D01FD4 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(95),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_irda",
+	.id		= 0,
+	.resource       = irda_resources,
+	.num_resources  = ARRAY_SIZE(irda_resources),
+};
+
+static unsigned char lcd_backlight_seq[3][2] = {
+	{ 0x04, 0x07 },
+	{ 0x23, 0x80 },
+	{ 0x03, 0x01 },
+};
+
+static void lcd_backlight_on(void)
+{
+	struct i2c_adapter *a;
+	struct i2c_msg msg;
+	int k;
+
+	a = i2c_get_adapter(1);
+	for (k = 0; a && k < 3; k++) {
+		msg.addr = 0x6d;
+		msg.buf = &lcd_backlight_seq[k][0];
+		msg.len = 2;
+		msg.flags = 0;
+		if (i2c_transfer(a, &msg, 1) != 1)
+			break;
+	}
+}
+
+static void lcd_backlight_reset(void)
+{
+	gpio_set_value(GPIO_PORT235, 0);
+	mdelay(24);
+	gpio_set_value(GPIO_PORT235, 1);
+}
+
+static void lcd_on(void *board_data, struct fb_info *info)
+{
+	lcd_backlight_on();
+}
+
+static void lcd_off(void *board_data)
+{
+	lcd_backlight_reset();
+}
+
+/* LCDC0 */
+static const struct fb_videomode lcdc0_modes[] = {
+	{
+		.name		= "R63302(QHD)",
+		.xres		= 544,
+		.yres		= 961,
+		.left_margin	= 72,
+		.right_margin	= 600,
+		.hsync_len	= 16,
+		.upper_margin	= 8,
+		.lower_margin	= 8,
+		.vsync_len	= 2,
+		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.interface_type = RGB24,
+		.clock_divider = 1,
+		.flags = LCDC_FLAGS_DWPOL,
+		.lcd_size_cfg.width = 44,
+		.lcd_size_cfg.height = 79,
+		.bpp = 16,
+		.lcd_cfg = lcdc0_modes,
+		.num_cfg = ARRAY_SIZE(lcdc0_modes),
+		.board_cfg = {
+			.display_on = lcd_on,
+			.display_off = lcd_off,
+		},
+	}
+};
+
+static struct resource lcdc0_resources[] = {
+	[0] = {
+		.name	= "LCDC0",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc0_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc0_resources),
+	.resource	= lcdc0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &lcdc0_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* MIPI-DSI */
+static struct resource mipidsi0_resources[] = {
+	[0] = {
+		.start  = 0xfeab0000,
+		.end    = 0xfeab3fff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0xfeab4000,
+		.end    = 0xfeab7fff,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct sh_mipi_dsi_info mipidsi0_info = {
+	.data_format	= MIPI_RGB888,
+	.lcd_chan	= &lcdc0_info.ch[0],
+	.vsynw_offset	= 20,
+	.clksrc		= 1,
+	.flags		= SH_MIPI_DSI_HSABM,
+};
+
+static struct platform_device mipidsi0_device = {
+	.name           = "sh-mipi-dsi",
+	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
+	.resource       = mipidsi0_resources,
+	.id             = 0,
+	.dev	= {
+		.platform_data	= &mipidsi0_info,
+	},
+};
+
 static struct platform_device *ag5evm_devices[] __initdata = {
 	&eth_device,
 	&keysc_device,
 	&fsi_device,
 	&mmc_device,
+	&irda_device,
+	&lcdc0_device,
+	&mipidsi0_device,
 };
 
 static struct map_desc ag5evm_io_desc[] __initdata = {
@@ -224,6 +379,8 @@ void __init ag5evm_init_irq(void)
 	__raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
 }
 
+#define DSI0PHYCR	0xe615006c
+
 static void __init ag5evm_init(void)
 {
 	sh73a0_pinmux_init();
@@ -287,6 +444,25 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_FSIAISLD, NULL);
 	gpio_request(GPIO_FN_FSIAOSLD, NULL);
 
+	/* IrDA */
+	gpio_request(GPIO_FN_PORT241_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_PORT242_IRDA_IN,  NULL);
+	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
+
+	/* LCD panel */
+	gpio_request(GPIO_PORT217, NULL); /* RESET */
+	gpio_direction_output(GPIO_PORT217, 0);
+	mdelay(1);
+	gpio_set_value(GPIO_PORT217, 1);
+
+	/* LCD backlight controller */
+	gpio_request(GPIO_PORT235, NULL); /* RESET */
+	gpio_direction_output(GPIO_PORT235, 0);
+	lcd_backlight_reset();
+
+	/* MIPI-DSI clock setup */
+	__raw_writel(0x2a809010, DSI0PHYCR);
+
 #ifdef CONFIG_CACHE_L2X0
 	/* Shared attribute override enable, 64K*8way */
 	l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);

arch/arm/mach-shmobile/board-g3evm.c

@@ -347,7 +347,6 @@ static void __init g3evm_init(void)
 	gpio_request(GPIO_FN_IRDA_OUT, NULL);
 	gpio_request(GPIO_FN_IRDA_IN, NULL);
 	gpio_request(GPIO_FN_IRDA_FIRSEL, NULL);
-	set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW);
 
 	sh7367_add_standard_devices();
 

arch/arm/mach-shmobile/board-mackerel.c

@@ -169,9 +169,8 @@
  *	SW1	|	SW33
  *		| bit1 | bit2 | bit3 | bit4
  * -------------+------+------+------+-------
- * MMC0	  OFF	|  OFF |  ON  |  ON  |  X
+ * MMC0   OFF	|  OFF |   X  |  ON  |  X       (Use MMCIF)
- * MMC1	  ON	|  OFF |  ON  |  X   | ON
+ * SDHI1  OFF	|  ON  |   X  |  OFF |  X       (Use MFD_SH_MOBILE_SDHI)
- * SDHI1  OFF	|  ON  |   X  |  OFF | ON
  *
  */
 

arch/arm/mach-shmobile/clock-sh7372.c

@@ -234,7 +234,9 @@ static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
+	__raw_writel(value | ((idx + 19) << 24), PLLC2CR);
+
+	clk->rate = clk->freq_table[idx].frequency;
 
 	return 0;
 }

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -118,8 +118,16 @@ static unsigned long pll_recalc(struct clk *clk)
 {
 	unsigned long mult = 1;
 
-	if (__raw_readl(PLLECR) & (1 << clk->enable_bit))
+	if (__raw_readl(PLLECR) & (1 << clk->enable_bit)) {
 		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
+		/* handle CFG bit for PLL1 and PLL2 */
+		switch (clk->enable_bit) {
+		case 1:
+		case 2:
+			if (__raw_readl(clk->enable_reg) & (1 << 20))
+				mult *= 2;
+		}
+	}
 
 	return clk->parent->rate * mult;
 }
@@ -212,7 +220,7 @@ enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
 static struct clk div4_clks[DIV4_NR] = {
 	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
 	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
-	[DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_M3] = DIV4(FRQCRA, 12, 0xfff, CLK_ENABLE_ON_INIT),
 	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
 	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
 	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
@@ -255,10 +263,10 @@ static struct clk div6_clks[DIV6_NR] = {
 };
 
 enum { MSTP001,
-	MSTP125, MSTP116,
+	MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP323, MSTP312,
+	MSTP331, MSTP329, MSTP325, MSTP323, MSTP312,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
 
@@ -268,7 +276,9 @@ enum { MSTP001,
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
 	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+	[MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX0 */
 	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
 	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
 	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
 	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
@@ -279,6 +289,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
 	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
 	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
 	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
@@ -288,16 +299,25 @@ static struct clk mstp_clks[MSTP_NR] = {
 
 #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
 #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
 
 static struct clk_lookup lookups[] = {
 	/* main clocks */
 	CLKDEV_CON_ID("r_clk", &r_clk),
 
+	/* DIV6 clocks */
+	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
+	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
+	CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
+	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
@@ -308,6 +328,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */

arch/arm/mach-shmobile/intc-sh7372.c

@@ -365,6 +365,7 @@ static struct intc_desc intca_desc __initdata = {
 
 enum {
 	UNUSED_INTCS = 0,
+	ENABLED_INTCS,
 
 	INTCS,
 
@@ -413,7 +414,7 @@ enum {
 	CMT4,
 	DSITX1_DSITX1_0,
 	DSITX1_DSITX1_1,
-	/* MFIS2 */
+	MFIS2_INTCS, /* Priority always enabled using ENABLED_INTCS */
 	CPORTS2R,
 	/* CEC */
 	JPU6E,
@@ -477,7 +478,7 @@ static struct intc_vect intcs_vectors[] = {
 	INTCS_VECT(CMT4, 0x1980),
 	INTCS_VECT(DSITX1_DSITX1_0, 0x19a0),
 	INTCS_VECT(DSITX1_DSITX1_1, 0x19c0),
-	/* MFIS2 */
+	INTCS_VECT(MFIS2_INTCS, 0x1a00),
 	INTCS_VECT(CPORTS2R, 0x1a20),
 	/* CEC */
 	INTCS_VECT(JPU6E, 0x1a80),
@@ -543,7 +544,7 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	  { 0, TMU1_TUNI2, TMU1_TUNI1, TMU1_TUNI0,
 	    CMT4, DSITX1_DSITX1_0, DSITX1_DSITX1_1, 0 } },
 	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
-	  { 0, CPORTS2R, 0, 0,
+	  { MFIS2_INTCS, CPORTS2R, 0, 0,
 	    JPU6E, 0, 0, 0 } },
 	{ 0xffd20104, 0, 16, /* INTAMASK */
 	  { 0, 0, 0, 0, 0, 0, 0, 0,
@@ -571,7 +572,8 @@ static struct intc_prio_reg intcs_prio_registers[] = {
 	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, 0 } },
 	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, DSITX1_DSITX1_0,
 					       DSITX1_DSITX1_1, 0 } },
-	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { 0, CPORTS2R, 0, 0 } },
+	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { ENABLED_INTCS, CPORTS2R,
+					       0, 0 } },
 	{ 0xffd5003c, 0, 16, 4, /* IPRPS3 */ { JPU6E, 0, 0, 0 } },
 };
 
@@ -590,6 +592,7 @@ static struct resource intcs_resources[] __initdata = {
 
 static struct intc_desc intcs_desc __initdata = {
 	.name = "sh7372-intcs",
+	.force_enable = ENABLED_INTCS,
 	.resource = intcs_resources,
 	.num_resources = ARRAY_SIZE(intcs_resources),
 	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,

arch/arm/mach-shmobile/intc-sh73a0.c

@@ -252,10 +252,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
 
 void __init sh73a0_init_irq(void)
 {
-	void __iomem *gic_base = __io(0xf0001000);
+	void __iomem *gic_dist_base = __io(0xf0001000);
+	void __iomem *gic_cpu_base = __io(0xf0000100);
 	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
 
-	gic_init(0, 29, gic_base, gic_base);
+	gic_init(0, 29, gic_dist_base, gic_cpu_base);
 
 	register_intc_controller(&intcs_desc);
 

arch/arm/mach-tegra/include/mach/kbc.h

@@ -0,0 +1,61 @@
+/*
+ * Platform definitions for tegra-kbc keyboard input driver
+ *
+ * Copyright (c) 2010-2011, NVIDIA Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_TEGRA_KBC_H
+#define ASMARM_ARCH_TEGRA_KBC_H
+
+#include <linux/types.h>
+#include <linux/input/matrix_keypad.h>
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+#define KBC_MAX_GPIO	24
+#define KBC_MAX_KPENT	8
+#else
+#define KBC_MAX_GPIO	20
+#define KBC_MAX_KPENT	7
+#endif
+
+#define KBC_MAX_ROW	16
+#define KBC_MAX_COL	8
+#define KBC_MAX_KEY	(KBC_MAX_ROW * KBC_MAX_COL)
+
+struct tegra_kbc_pin_cfg {
+	bool is_row;
+	unsigned char num;
+};
+
+struct tegra_kbc_wake_key {
+	u8 row:4;
+	u8 col:4;
+};
+
+struct tegra_kbc_platform_data {
+	unsigned int debounce_cnt;
+	unsigned int repeat_cnt;
+
+	unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */
+	const struct tegra_kbc_wake_key *wake_cfg;
+
+	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
+	const struct matrix_keymap_data *keymap_data;
+
+	bool wakeup;
+};
+#endif

arch/arm/mach-versatile/Kconfig

@@ -2,17 +2,19 @@ menu "Versatile platform type"
 	depends on ARCH_VERSATILE
 
 config ARCH_VERSATILE_PB
-	bool "Support Versatile/PB platform"
+	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
 	select CPU_ARM926T
 	select MIGHT_HAVE_PCI
 	default y
 	help
-	  Include support for the ARM(R) Versatile/PB platform.
+	  Include support for the ARM(R) Versatile Platform Baseboard
+	  for the ARM926EJ-S.
 
 config MACH_VERSATILE_AB
-	bool "Support Versatile/AB platform"
+	bool "Support Versatile Application Baseboard for ARM926EJ-S"
 	select CPU_ARM926T
 	help
-	  Include support for the ARM(R) Versatile/AP platform.
+	  Include support for the ARM(R) Versatile Application Baseboard
+	  for the ARM926EJ-S.
 
 endmenu

arch/arm/mach-vexpress/platsmp.c

@@ -39,7 +39,7 @@ volatile int __cpuinitdata pen_release = -1;
  * observers, irrespective of whether they're taking part in coherency
  * or not.  This is necessary for the hotplug code to work reliably.
  */
-static void write_pen_release(int val)
+static void __cpuinit write_pen_release(int val)
 {
 	pen_release = val;
 	smp_wmb();

arch/arm/mach-vexpress/v2m.c

@@ -19,6 +19,7 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
+#include <asm/hardware/sp810.h>
 
 #include <mach/motherboard.h>
 
@@ -50,8 +51,16 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
 
 static void __init v2m_timer_init(void)
 {
+	u32 scctrl;
+
 	versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
 
+	/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
+	scctrl = readl(MMIO_P2V(V2M_SYSCTL + SCCTRL));
+	scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
+	scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
+	writel(scctrl, MMIO_P2V(V2M_SYSCTL + SCCTRL));
+
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
 

arch/arm/plat-omap/Kconfig

@@ -144,12 +144,9 @@ config OMAP_IOMMU_DEBUG
 config OMAP_IOMMU_IVA2
 	bool
 
-choice
-	prompt "System timer"
-	default OMAP_32K_TIMER if !ARCH_OMAP15XX
-
 config OMAP_MPU_TIMER
 	bool "Use mpu timer"
+	depends on ARCH_OMAP1
 	help
 	  Select this option if you want to use the OMAP mpu timer. This
 	  timer provides more intra-tick resolution than the 32KHz timer,
@@ -158,6 +155,7 @@ config OMAP_MPU_TIMER
 config OMAP_32K_TIMER
 	bool "Use 32KHz timer"
 	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+	default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
 	help
 	  Select this option if you want to enable the OMAP 32KHz timer.
 	  This timer saves power compared to the OMAP_MPU_TIMER, and has
@@ -165,8 +163,6 @@ config OMAP_32K_TIMER
 	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 	  currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
 
-endchoice
-
 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 	depends on ARCH_OMAP3 && PM

arch/arm/plat-omap/counter_32k.c

@@ -36,8 +36,6 @@
 
 #define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
 
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
 #include <linux/clocksource.h>
 
 /*
@@ -122,12 +120,24 @@ static DEFINE_CLOCK_DATA(cd);
 #define SC_MULT		4000000000u
 #define SC_SHIFT	17
 
-unsigned long long notrace sched_clock(void)
+static inline unsigned long long notrace _omap_32k_sched_clock(void)
 {
 	u32 cyc = clocksource_32k.read(&clocksource_32k);
 	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
 }
 
+#ifndef CONFIG_OMAP_MPU_TIMER
+unsigned long long notrace sched_clock(void)
+{
+	return _omap_32k_sched_clock();
+}
+#else
+unsigned long long notrace omap_32k_sched_clock(void)
+{
+	return _omap_32k_sched_clock();
+}
+#endif
+
 static void notrace omap_update_sched_clock(void)
 {
 	u32 cyc = clocksource_32k.read(&clocksource_32k);
@@ -160,7 +170,7 @@ void read_persistent_clock(struct timespec *ts)
 	*ts = *tsp;
 }
 
-static int __init omap_init_clocksource_32k(void)
+int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
@@ -195,7 +205,3 @@ static int __init omap_init_clocksource_32k(void)
 	}
 	return 0;
 }
-arch_initcall(omap_init_clocksource_32k);
-
-#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-

arch/arm/plat-omap/dma.c

@@ -53,7 +53,7 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
+#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
@@ -1873,7 +1873,7 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA misaligned error with device %d\n",
 		       dma_chan[ch].dev_id);
 
-	p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+	p->dma_write(status, CSR, ch);
 	p->dma_write(1 << ch, IRQSTATUS_L0, ch);
 	/* read back the register to flush the write */
 	p->dma_read(IRQSTATUS_L0, ch);
@@ -1893,10 +1893,9 @@ static int omap2_dma_handle_ch(int ch)
 			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
 		status = p->dma_read(CSR, ch);
+		p->dma_write(status, CSR, ch);
 	}
 
-	p->dma_write(status, CSR, ch);
-
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 

arch/arm/plat-omap/include/plat/common.h

@@ -35,6 +35,9 @@ struct sys_timer;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
+extern bool omap_32k_timer_init(void);
+extern int __init omap_init_clocksource_32k(void);
+extern unsigned long long notrace omap_32k_sched_clock(void);
 
 extern void omap_reserve(void);
 

arch/m68k/amiga/config.c

@@ -610,17 +610,17 @@ static void amiga_mem_console_write(struct console *co, const char *s,
 
 static int __init amiga_savekmsg_setup(char *arg)
 {
-	static struct resource debug_res = { .name = "Debug" };
-
 	if (!MACH_IS_AMIGA || strcmp(arg, "mem"))
-		goto done;
+		return 0;
 
-	if (!AMIGAHW_PRESENT(CHIP_RAM)) {
+	if (amiga_chip_size < SAVEKMSG_MAXMEM) {
-		printk("Warning: no chipram present for debugging\n");
+		pr_err("Not enough chipram for debugging\n");
-		goto done;
+		return -ENOMEM;
 	}
 
-	savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
+	/* Just steal the block, the chipram allocator isn't functional yet */
+	amiga_chip_size -= SAVEKMSG_MAXMEM;
+	savekmsg = (void *)ZTWO_VADDR(CHIP_PHYSADDR + amiga_chip_size);
 	savekmsg->magic1 = SAVEKMSG_MAGIC1;
 	savekmsg->magic2 = SAVEKMSG_MAGIC2;
 	savekmsg->magicptr = ZTWO_PADDR(savekmsg);
@@ -628,8 +628,6 @@ static int __init amiga_savekmsg_setup(char *arg)
 
 	amiga_console_driver.write = amiga_mem_console_write;
 	register_console(&amiga_console_driver);
-
-done:
 	return 0;
 }
 

arch/m68k/atari/ataints.c

@@ -388,9 +388,9 @@ void __init atari_init_IRQ(void)
 	}
 
 	if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
-		scc.cha_a_ctrl = 9;
+		atari_scc.cha_a_ctrl = 9;
 		MFPDELAY();
-		scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
+		atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
 	}
 
 	if (ATARIHW_PRESENT(SCU)) {

arch/m68k/atari/config.c

@@ -315,7 +315,7 @@ void __init config_atari(void)
 		ATARIHW_SET(SCC_DMA);
 		printk("SCC_DMA ");
 	}
-	if (scc_test(&scc.cha_a_ctrl)) {
+	if (scc_test(&atari_scc.cha_a_ctrl)) {
 		ATARIHW_SET(SCC);
 		printk("SCC ");
 	}

arch/m68k/atari/debug.c

@@ -53,9 +53,9 @@ static inline void ata_scc_out(char c)
 {
 	do {
 		MFPDELAY();
-	} while (!(scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
+	} while (!(atari_scc.cha_b_ctrl & 0x04)); /* wait for tx buf empty */
 	MFPDELAY();
-	scc.cha_b_data = c;
+	atari_scc.cha_b_data = c;
 }
 
 static void atari_scc_console_write(struct console *co, const char *str,
@@ -140,9 +140,9 @@ int atari_scc_console_wait_key(struct console *co)
 {
 	do {
 		MFPDELAY();
-	} while (!(scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
+	} while (!(atari_scc.cha_b_ctrl & 0x01)); /* wait for rx buf filled */
 	MFPDELAY();
-	return scc.cha_b_data;
+	return atari_scc.cha_b_data;
 }
 
 int atari_midi_console_wait_key(struct console *co)
@@ -185,9 +185,9 @@ static void __init atari_init_mfp_port(int cflag)
 
 #define SCC_WRITE(reg, val)				\
 	do {						\
-		scc.cha_b_ctrl = (reg);			\
+		atari_scc.cha_b_ctrl = (reg);		\
 		MFPDELAY();				\
-		scc.cha_b_ctrl = (val);			\
+		atari_scc.cha_b_ctrl = (val);		\
 		MFPDELAY();				\
 	} while (0)
 
@@ -240,7 +240,7 @@ static void __init atari_init_scc_port(int cflag)
 	reg3 = (cflag & CSIZE) == CS8 ? 0xc0 : 0x40;
 	reg5 = (cflag & CSIZE) == CS8 ? 0x60 : 0x20 | 0x82 /* assert DTR/RTS */;
 
-	(void)scc.cha_b_ctrl;		/* reset reg pointer */
+	(void)atari_scc.cha_b_ctrl;	/* reset reg pointer */
 	SCC_WRITE(9, 0xc0);		/* reset */
 	LONG_DELAY();			/* extra delay after WR9 access */
 	SCC_WRITE(4, (cflag & PARENB) ? ((cflag & PARODD) ? 0x01 : 0x03)

arch/m68k/include/asm/atarihw.h

@@ -449,7 +449,7 @@ struct SCC
   u_char char_dummy3;
   u_char cha_b_data;
  };
-# define scc ((*(volatile struct SCC*)SCC_BAS))
+# define atari_scc ((*(volatile struct SCC*)SCC_BAS))
 
 /* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
 # define st_escc ((*(volatile struct SCC*)0xfffffa31))

arch/m68k/include/asm/string.h

@@ -81,18 +81,6 @@ static inline char *strncpy(char *dest, const char *src, size_t n)
 	strcpy(__d + strlen(__d), (s));		\
 })
 
-#define __HAVE_ARCH_STRCHR
-static inline char *strchr(const char *s, int c)
-{
-	char sc, ch = c;
-
-	for (; (sc = *s++) != ch; ) {
-		if (!sc)
-			return NULL;
-	}
-	return (char *)s - 1;
-}
-
 #ifndef CONFIG_COLDFIRE
 #define __HAVE_ARCH_STRCMP
 static inline int strcmp(const char *cs, const char *ct)

arch/parisc/kernel/pdc_cons.c

@@ -169,11 +169,11 @@ static int __init pdc_console_tty_driver_init(void)
 
 	struct console *tmp;
 
-	acquire_console_sem();
+	console_lock();
 	for_each_console(tmp)
 		if (tmp == &pdc_cons)
 			break;
-	release_console_sem();
+	console_unlock();
 
 	if (!tmp) {
 		printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name);

arch/powerpc/kernel/perf_event_fsl_emb.c

@@ -596,6 +596,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 			if (left <= 0)
 				left = period;
 			record = 1;
+			event->hw.last_period = event->hw.sample_period;
 		}
 		if (left < 0x80000000LL)
 			val = 0x80000000LL - left;

arch/sh/Kconfig

@@ -15,6 +15,7 @@ config SUPERH
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_XZ
 	select HAVE_KERNEL_LZO
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API

arch/sh/Makefile

@@ -200,7 +200,7 @@ endif
 libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
 libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
 
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.lzo \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.xz uImage.lzo \
 	       uImage.srec uImage.bin zImage vmlinux.bin vmlinux.srec \
 	       romImage
 PHONY += $(BOOT_TARGETS)
@@ -230,5 +230,6 @@ define archhelp
 	@echo '* uImage.gz	           - Kernel-only image for U-Boot (gzip)'
 	@echo '  uImage.bz2	           - Kernel-only image for U-Boot (bzip2)'
 	@echo '  uImage.lzma	           - Kernel-only image for U-Boot (lzma)'
+	@echo '  uImage.xz	           - Kernel-only image for U-Boot (xz)'
 	@echo '  uImage.lzo	           - Kernel-only image for U-Boot (lzo)'
 endef

arch/sh/boards/mach-ecovec24/setup.c

@@ -1294,6 +1294,7 @@ static int __init arch_setup(void)
 	i2c_register_board_info(1, i2c1_devices,
 				ARRAY_SIZE(i2c1_devices));
 
+#if defined(CONFIG_VIDEO_SH_VOU) || defined(CONFIG_VIDEO_SH_VOU_MODULE)
 	/* VOU */
 	gpio_request(GPIO_FN_DV_D15, NULL);
 	gpio_request(GPIO_FN_DV_D14, NULL);
@@ -1325,6 +1326,7 @@ static int __init arch_setup(void)
 
 	/* Remove reset */
 	gpio_set_value(GPIO_PTG4, 1);
+#endif
 
 	return platform_add_devices(ecovec_devices,
 				    ARRAY_SIZE(ecovec_devices));

arch/sh/boot/Makefile

@@ -24,12 +24,13 @@ suffix-y := bin
 suffix-$(CONFIG_KERNEL_GZIP)	:= gz
 suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
 suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
+suffix-$(CONFIG_KERNEL_XZ)	:= xz
 suffix-$(CONFIG_KERNEL_LZO)	:= lzo
 
 targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz \
-	   uImage.bz2 uImage.lzma uImage.lzo uImage.bin
+	   uImage.bz2 uImage.lzma uImage.xz uImage.lzo uImage.bin
 extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
-	   vmlinux.bin.lzo
+	   vmlinux.bin.xz vmlinux.bin.lzo
 subdir- := compressed romimage
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
@@ -76,6 +77,9 @@ $(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
 $(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzma)
 
+$(obj)/vmlinux.bin.xz: $(obj)/vmlinux.bin FORCE
+	$(call if_changed,xzkern)
+
 $(obj)/vmlinux.bin.lzo: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,lzo)
 
@@ -88,6 +92,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz
 $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
 	$(call if_changed,uimage,lzma)
 
+$(obj)/uImage.xz: $(obj)/vmlinux.bin.xz
+	$(call if_changed,uimage,xz)
+
 $(obj)/uImage.lzo: $(obj)/vmlinux.bin.lzo
 	$(call if_changed,uimage,lzo)
 

arch/sh/boot/compressed/Makefile

@@ -6,7 +6,7 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   vmlinux.bin.bz2 vmlinux.bin.lzma \
-		   vmlinux.bin.lzo \
+		   vmlinux.bin.xz vmlinux.bin.lzo \
 		   head_$(BITS).o misc.o piggy.o
 
 OBJECTS = $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/cache.o
@@ -50,6 +50,8 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
 $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,xzkern)
 $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzo)
 

arch/sh/boot/compressed/misc.c

@@ -61,6 +61,10 @@ static unsigned long free_mem_end_ptr;
 #include "../../../../lib/decompress_unlzma.c"
 #endif
 
+#ifdef CONFIG_KERNEL_XZ
+#include "../../../../lib/decompress_unxz.c"
+#endif
+
 #ifdef CONFIG_KERNEL_LZO
 #include "../../../../lib/decompress_unlzo.c"
 #endif

arch/sh/include/asm/pgtable.h

@@ -134,6 +134,7 @@ typedef pte_t *pte_addr_t;
 extern void pgtable_cache_init(void);
 
 struct vm_area_struct;
+struct mm_struct;
 
 extern void __update_cache(struct vm_area_struct *vma,
 			   unsigned long address, pte_t pte);

arch/sh/kernel/cpu/sh4/setup-sh7750.c

@@ -230,10 +230,10 @@ static struct platform_device *sh7750_devices[] __initdata = {
 static int __init sh7750_devices_setup(void)
 {
 	if (mach_is_rts7751r2d()) {
-		platform_register_device(&scif_device);
+		platform_device_register(&scif_device);
 	} else {
-		platform_register_device(&sci_device);
+		platform_device_register(&sci_device);
-		platform_register_device(&scif_device);
+		platform_device_register(&scif_device);
 	}
 
 	return platform_add_devices(sh7750_devices,

arch/sh/kernel/topology.c

@@ -17,6 +17,7 @@
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 cpumask_t cpu_core_map[NR_CPUS];
+EXPORT_SYMBOL(cpu_core_map);
 
 static cpumask_t cpu_coregroup_map(unsigned int cpu)
 {

arch/x86/include/asm/cacheflush.h

@@ -1,48 +1,8 @@
 #ifndef _ASM_X86_CACHEFLUSH_H
 #define _ASM_X86_CACHEFLUSH_H
 
-/* Keep includes the same across arches.  */
-#include <linux/mm.h>
-
 /* Caches aren't brain-dead on the intel. */
-static inline void flush_cache_all(void) { }
+#include <asm-generic/cacheflush.h>
-static inline void flush_cache_mm(struct mm_struct *mm) { }
-static inline void flush_cache_dup_mm(struct mm_struct *mm) { }
-static inline void flush_cache_range(struct vm_area_struct *vma,
-				     unsigned long start, unsigned long end) { }
-static inline void flush_cache_page(struct vm_area_struct *vma,
-				    unsigned long vmaddr, unsigned long pfn) { }
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
-static inline void flush_dcache_page(struct page *page) { }
-static inline void flush_dcache_mmap_lock(struct address_space *mapping) { }
-static inline void flush_dcache_mmap_unlock(struct address_space *mapping) { }
-static inline void flush_icache_range(unsigned long start,
-				      unsigned long end) { }
-static inline void flush_icache_page(struct vm_area_struct *vma,
-				     struct page *page) { }
-static inline void flush_icache_user_range(struct vm_area_struct *vma,
-					   struct page *page,
-					   unsigned long addr,
-					   unsigned long len) { }
-static inline void flush_cache_vmap(unsigned long start, unsigned long end) { }
-static inline void flush_cache_vunmap(unsigned long start,
-				      unsigned long end) { }
-
-static inline void copy_to_user_page(struct vm_area_struct *vma,
-				     struct page *page, unsigned long vaddr,
-				     void *dst, const void *src,
-				     unsigned long len)
-{
-	memcpy(dst, src, len);
-}
-
-static inline void copy_from_user_page(struct vm_area_struct *vma,
-				       struct page *page, unsigned long vaddr,
-				       void *dst, const void *src,
-				       unsigned long len)
-{
-	memcpy(dst, src, len);
-}
 
 #ifdef CONFIG_X86_PAT
 /*

arch/x86/include/asm/cpu.h

@@ -32,5 +32,6 @@ extern void arch_unregister_cpu(int);
 
 DECLARE_PER_CPU(int, cpu_state);
 
+int __cpuinit mwait_usable(const struct cpuinfo_x86 *);
 
 #endif /* _ASM_X86_CPU_H */

arch/x86/include/asm/jump_label.h

@@ -14,7 +14,7 @@
 	do {							\
 		asm goto("1:"					\
 			JUMP_LABEL_INITIAL_NOP			\
-			".pushsection __jump_table,  \"a\" \n\t"\
+			".pushsection __jump_table,  \"aw\" \n\t"\
 			_ASM_PTR "1b, %l[" #label "], %c0 \n\t" \
 			".popsection \n\t"			\
 			: :  "i" (key) :  : label);		\

arch/x86/include/asm/paravirt.h

@@ -558,13 +558,12 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 			      pmd_t *pmdp, pmd_t pmd)
 {
-#if PAGETABLE_LEVELS >= 3
 	if (sizeof(pmdval_t) > sizeof(long))
 		/* 5 arg words */
 		pv_mmu_ops.set_pmd_at(mm, addr, pmdp, pmd);
 	else
-		PVOP_VCALL4(pv_mmu_ops.set_pmd_at, mm, addr, pmdp, pmd.pmd);
+		PVOP_VCALL4(pv_mmu_ops.set_pmd_at, mm, addr, pmdp,
-#endif
+			    native_pmd_val(pmd));
 }
 #endif
 

arch/x86/kernel/cpu/intel_cacheinfo.c

@@ -45,6 +45,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x0a, LVL_1_DATA, 8 },	/* 2 way set assoc, 32 byte line size */
 	{ 0x0c, LVL_1_DATA, 16 },	/* 4-way set assoc, 32 byte line size */
 	{ 0x0d, LVL_1_DATA, 16 },	/* 4-way set assoc, 64 byte line size */
+	{ 0x0e, LVL_1_DATA, 24 },	/* 6-way set assoc, 64 byte line size */
 	{ 0x21, LVL_2,      256 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x22, LVL_3,      512 },	/* 4-way set assoc, sectored cache, 64 byte line size */
 	{ 0x23, LVL_3,      MB(1) },	/* 8-way set assoc, sectored cache, 64 byte line size */
@@ -66,6 +67,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x45, LVL_2,      MB(2) },	/* 4-way set assoc, 32 byte line size */
 	{ 0x46, LVL_3,      MB(4) },	/* 4-way set assoc, 64 byte line size */
 	{ 0x47, LVL_3,      MB(8) },	/* 8-way set assoc, 64 byte line size */
+	{ 0x48, LVL_2,      MB(3) },	/* 12-way set assoc, 64 byte line size */
 	{ 0x49, LVL_3,      MB(4) },	/* 16-way set assoc, 64 byte line size */
 	{ 0x4a, LVL_3,      MB(6) },	/* 12-way set assoc, 64 byte line size */
 	{ 0x4b, LVL_3,      MB(8) },	/* 16-way set assoc, 64 byte line size */
@@ -87,6 +89,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 	{ 0x7c, LVL_2,      MB(1) },	/* 8-way set assoc, sectored cache, 64 byte line size */
 	{ 0x7d, LVL_2,      MB(2) },	/* 8-way set assoc, 64 byte line size */
 	{ 0x7f, LVL_2,      512 },	/* 2-way set assoc, 64 byte line size */
+	{ 0x80, LVL_2,      512 },	/* 8-way set assoc, 64 byte line size */
 	{ 0x82, LVL_2,      256 },	/* 8-way set assoc, 32 byte line size */
 	{ 0x83, LVL_2,      512 },	/* 8-way set assoc, 32 byte line size */
 	{ 0x84, LVL_2,      MB(1) },	/* 8-way set assoc, 32 byte line size */

arch/x86/kernel/cpu/mcheck/therm_throt.c

@@ -59,6 +59,7 @@ struct thermal_state {
 
 /* Callback to handle core threshold interrupts */
 int (*platform_thermal_notify)(__u64 msr_val);
+EXPORT_SYMBOL(platform_thermal_notify);
 
 static DEFINE_PER_CPU(struct thermal_state, thermal_state);
 

arch/x86/kernel/process.c

@@ -14,6 +14,7 @@
 #include <linux/utsname.h>
 #include <trace/events/power.h>
 #include <linux/hw_breakpoint.h>
+#include <asm/cpu.h>
 #include <asm/system.h>
 #include <asm/apic.h>
 #include <asm/syscalls.h>
@@ -505,7 +506,7 @@ static void poll_idle(void)
 #define MWAIT_ECX_EXTENDED_INFO		0x01
 #define MWAIT_EDX_C1			0xf0
 
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
 {
 	u32 eax, ebx, ecx, edx;
 

arch/x86/kernel/smpboot.c

@@ -1402,8 +1402,9 @@ static inline void mwait_play_dead(void)
 	unsigned int highest_subcstate = 0;
 	int i;
 	void *mwait_ptr;
+	struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info);
 
-	if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_MWAIT))
+	if (!(cpu_has(c, X86_FEATURE_MWAIT) && mwait_usable(c)))
 		return;
 	if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH))
 		return;

drivers/char/agp/intel-gtt.c

@@ -68,6 +68,7 @@ static struct _intel_private {
 	phys_addr_t gma_bus_addr;
 	u32 PGETBL_save;
 	u32 __iomem *gtt;		/* I915G */
+	bool clear_fake_agp; /* on first access via agp, fill with scratch */
 	int num_dcache_entries;
 	union {
 		void __iomem *i9xx_flush_page;
@@ -869,21 +870,12 @@ static int intel_fake_agp_free_gatt_table(struct agp_bridge_data *bridge)
 
 static int intel_fake_agp_configure(void)
 {
-	int i;
-
 	if (!intel_enable_gtt())
 	    return -EIO;
 
+	intel_private.clear_fake_agp = true;
 	agp_bridge->gart_bus_addr = intel_private.gma_bus_addr;
 
-	for (i = 0; i < intel_private.base.gtt_total_entries; i++) {
-		intel_private.driver->write_entry(intel_private.scratch_page_dma,
-						  i, 0);
-	}
-	readl(intel_private.gtt+i-1);	/* PCI Posting. */
-
-	global_cache_flush();
-
 	return 0;
 }
 
@@ -945,6 +937,13 @@ static int intel_fake_agp_insert_entries(struct agp_memory *mem,
 {
 	int ret = -EINVAL;
 
+	if (intel_private.clear_fake_agp) {
+		int start = intel_private.base.stolen_size / PAGE_SIZE;
+		int end = intel_private.base.gtt_mappable_entries;
+		intel_gtt_clear_range(start, end - start);
+		intel_private.clear_fake_agp = false;
+	}
+
 	if (INTEL_GTT_GEN == 1 && type == AGP_DCACHE_MEMORY)
 		return i810_insert_dcache_entries(mem, pg_start, type);
 

drivers/char/bfin_jtag_comm.c

@@ -183,16 +183,16 @@ bfin_jc_circ_write(const unsigned char *buf, int count)
 }
 
 #ifndef CONFIG_BFIN_JTAG_COMM_CONSOLE
-# define acquire_console_sem()
+# define console_lock()
-# define release_console_sem()
+# define console_unlock()
 #endif
 static int
 bfin_jc_write(struct tty_struct *tty, const unsigned char *buf, int count)
 {
 	int i;
-	acquire_console_sem();
+	console_lock();
 	i = bfin_jc_circ_write(buf, count);
-	release_console_sem();
+	console_unlock();
 	wake_up_process(bfin_jc_kthread);
 	return i;
 }

drivers/char/tpm/tpm.c

@@ -364,12 +364,14 @@ unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
 		    tpm_protected_ordinal_duration[ordinal &
 						   TPM_PROTECTED_ORDINAL_MASK];
 
-	if (duration_idx != TPM_UNDEFINED)
+	if (duration_idx != TPM_UNDEFINED) {
 		duration = chip->vendor.duration[duration_idx];
-	if (duration <= 0)
+		/* if duration is 0, it's because chip->vendor.duration wasn't */
+		/* filled yet, so we set the lowest timeout just to give enough */
+		/* time for tpm_get_timeouts() to succeed */
+		return (duration <= 0 ? HZ : duration);
+	} else
 		return 2 * 60 * HZ;
-	else
-		return duration;
 }
 EXPORT_SYMBOL_GPL(tpm_calc_ordinal_duration);
 

drivers/char/tpm/tpm_tis.c

@@ -493,9 +493,6 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
-	if (is_itpm(to_pnp_dev(dev)))
-		itpm = 1;
-
 	if (itpm)
 		dev_info(dev, "Intel iTPM workaround enabled\n");
 
@@ -637,6 +634,9 @@ static int __devinit tpm_tis_pnp_init(struct pnp_dev *pnp_dev,
 	else
 		interrupts = 0;
 
+	if (is_itpm(pnp_dev))
+		itpm = 1;
+
 	return tpm_tis_init(&pnp_dev->dev, start, len, irq);
 }
 

drivers/clocksource/acpi_pm.c

@@ -202,17 +202,21 @@ static int __init init_acpi_pm_clocksource(void)
 			printk(KERN_INFO "PM-Timer had inconsistent results:"
 			       " 0x%#llx, 0x%#llx - aborting.\n",
 			       value1, value2);
+			pmtmr_ioport = 0;
 			return -EINVAL;
 		}
 		if (i == ACPI_PM_READ_CHECKS) {
 			printk(KERN_INFO "PM-Timer failed consistency check "
 			       " (0x%#llx) - aborting.\n", value1);
+			pmtmr_ioport = 0;
 			return -ENODEV;
 		}
 	}
 
-	if (verify_pmtmr_rate() != 0)
+	if (verify_pmtmr_rate() != 0){
+		pmtmr_ioport = 0;
 		return -ENODEV;
+	}
 
 	return clocksource_register_hz(&clocksource_acpi_pm,
 						PMTMR_TICKS_PER_SEC);

drivers/clocksource/tcb_clksrc.c

@@ -196,9 +196,9 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
 	clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
 	clkevt.clkevt.cpumask = cpumask_of(0);
 
-	setup_irq(irq, &tc_irqaction);
-
 	clockevents_register_device(&clkevt.clkevt);
+
+	setup_irq(irq, &tc_irqaction);
 }
 
 #else /* !CONFIG_GENERIC_CLOCKEVENTS */

drivers/gpio/langwell_gpio.c

@@ -187,7 +187,7 @@ MODULE_DEVICE_TABLE(pci, lnw_gpio_ids);
 
 static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-	struct lnw_gpio *lnw = (struct lnw_gpio *)get_irq_data(irq);
+	struct lnw_gpio *lnw = get_irq_data(irq);
 	u32 base, gpio;
 	void __iomem *gedr;
 	u32 gedr_v;
@@ -206,7 +206,12 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc)
 		/* clear the edge detect status bit */
 		writel(gedr_v, gedr);
 	}
-	desc->chip->eoi(irq);
+
+	if (desc->chip->irq_eoi)
+		desc->chip->irq_eoi(irq_get_irq_data(irq));
+	else
+		dev_warn(lnw->chip.dev, "missing EOI handler for irq %d\n", irq);
+
 }
 
 static int __devinit lnw_gpio_probe(struct pci_dev *pdev,

drivers/gpu/drm/Kconfig

@@ -100,7 +100,10 @@ config DRM_I830
 config DRM_I915
 	tristate "i915 driver"
 	depends on AGP_INTEL
+	# we need shmfs for the swappable backing store, and in particular
+	# the shmem_readpage() which depends upon tmpfs
 	select SHMEM
+	select TMPFS
 	select DRM_KMS_HELPER
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA

drivers/gpu/drm/i915/i915_dma.c

@@ -152,7 +152,7 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
-	struct intel_ring_buffer *ring = LP_RING(dev_priv);
+	int ret;
 
 	master_priv->sarea = drm_getsarea(dev);
 	if (master_priv->sarea) {
@@ -163,33 +163,22 @@ static int i915_initialize(struct drm_device * dev, drm_i915_init_t * init)
 	}
 
 	if (init->ring_size != 0) {
-		if (ring->obj != NULL) {
+		if (LP_RING(dev_priv)->obj != NULL) {
 			i915_dma_cleanup(dev);
 			DRM_ERROR("Client tried to initialize ringbuffer in "
 				  "GEM mode\n");
 			return -EINVAL;
 		}
 
-		ring->size = init->ring_size;
+		ret = intel_render_ring_init_dri(dev,
-
+						 init->ring_start,
-		ring->map.offset = init->ring_start;
+						 init->ring_size);
-		ring->map.size = init->ring_size;
+		if (ret) {
-		ring->map.type = 0;
-		ring->map.flags = 0;
-		ring->map.mtrr = 0;
-
-		drm_core_ioremap_wc(&ring->map, dev);
-
-		if (ring->map.handle == NULL) {
 			i915_dma_cleanup(dev);
-			DRM_ERROR("can not ioremap virtual address for"
+			return ret;
-				  " ring buffer\n");
-			return -ENOMEM;
 		}
 	}
 
-	ring->virtual_start = ring->map.handle;
-
 	dev_priv->cpp = init->cpp;
 	dev_priv->back_offset = init->back_offset;
 	dev_priv->front_offset = init->front_offset;
@@ -1226,9 +1215,15 @@ static int i915_load_modeset_init(struct drm_device *dev)
 	if (ret)
 		DRM_INFO("failed to find VBIOS tables\n");
 
-	/* if we have > 1 VGA cards, then disable the radeon VGA resources */
+	/* If we have > 1 VGA cards, then we need to arbitrate access
+	 * to the common VGA resources.
+	 *
+	 * If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
+	 * then we do not take part in VGA arbitration and the
+	 * vga_client_register() fails with -ENODEV.
+	 */
 	ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode);
-	if (ret)
+	if (ret && ret != -ENODEV)
 		goto cleanup_ringbuffer;
 
 	intel_register_dsm_handler();

drivers/gpu/drm/i915/i915_drv.c

@@ -60,7 +60,7 @@ extern int intel_agp_enabled;
 
 #define INTEL_VGA_DEVICE(id, info) {		\
 	.class = PCI_CLASS_DISPLAY_VGA << 8,	\
-	.class_mask = 0xffff00,			\
+	.class_mask = 0xff0000,			\
 	.vendor = 0x8086,			\
 	.device = id,				\
 	.subvendor = PCI_ANY_ID,		\
@@ -752,6 +752,9 @@ static int __init i915_init(void)
 		driver.driver_features &= ~DRIVER_MODESET;
 #endif
 
+	if (!(driver.driver_features & DRIVER_MODESET))
+		driver.get_vblank_timestamp = NULL;
+
 	return drm_init(&driver);
 }
 

drivers/gpu/drm/i915/i915_drv.h

@@ -543,8 +543,11 @@ typedef struct drm_i915_private {
 		/** List of all objects in gtt_space. Used to restore gtt
 		 * mappings on resume */
 		struct list_head gtt_list;
-		/** End of mappable part of GTT */
+
+		/** Usable portion of the GTT for GEM */
+		unsigned long gtt_start;
 		unsigned long gtt_mappable_end;
+		unsigned long gtt_end;
 
 		struct io_mapping *gtt_mapping;
 		int gtt_mtrr;

drivers/gpu/drm/i915/i915_gem.c

@@ -140,12 +140,16 @@ void i915_gem_do_init(struct drm_device *dev,
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 
-	drm_mm_init(&dev_priv->mm.gtt_space, start,
+	drm_mm_init(&dev_priv->mm.gtt_space, start, end - start);
-		    end - start);
 
+	dev_priv->mm.gtt_start = start;
+	dev_priv->mm.gtt_mappable_end = mappable_end;
+	dev_priv->mm.gtt_end = end;
 	dev_priv->mm.gtt_total = end - start;
 	dev_priv->mm.mappable_gtt_total = min(end, mappable_end) - start;
-	dev_priv->mm.gtt_mappable_end = mappable_end;
+
+	/* Take over this portion of the GTT */
+	intel_gtt_clear_range(start / PAGE_SIZE, (end-start) / PAGE_SIZE);
 }
 
 int
@@ -1857,7 +1861,7 @@ i915_gem_retire_requests_ring(struct drm_device *dev,
 
 	seqno = ring->get_seqno(ring);
 
-	for (i = 0; i < I915_NUM_RINGS; i++)
+	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++)
 		if (seqno >= ring->sync_seqno[i])
 			ring->sync_seqno[i] = 0;
 

drivers/gpu/drm/i915/i915_gem_execbuffer.c

@@ -1175,7 +1175,7 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		goto err;
 
 	seqno = i915_gem_next_request_seqno(dev, ring);
-	for (i = 0; i < I915_NUM_RINGS-1; i++) {
+	for (i = 0; i < ARRAY_SIZE(ring->sync_seqno); i++) {
 		if (seqno < ring->sync_seqno[i]) {
 			/* The GPU can not handle its semaphore value wrapping,
 			 * so every billion or so execbuffers, we need to stall

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -34,6 +34,10 @@ void i915_gem_restore_gtt_mappings(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj;
 
+	/* First fill our portion of the GTT with scratch pages */
+	intel_gtt_clear_range(dev_priv->mm.gtt_start / PAGE_SIZE,
+			      (dev_priv->mm.gtt_end - dev_priv->mm.gtt_start) / PAGE_SIZE);
+
 	list_for_each_entry(obj, &dev_priv->mm.gtt_list, gtt_list) {
 		i915_gem_clflush_object(obj);
 

drivers/gpu/drm/i915/i915_irq.c

@@ -274,24 +274,35 @@ int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
 	return ret;
 }
 
-int i915_get_vblank_timestamp(struct drm_device *dev, int crtc,
+int i915_get_vblank_timestamp(struct drm_device *dev, int pipe,
 			      int *max_error,
 			      struct timeval *vblank_time,
 			      unsigned flags)
 {
-	struct drm_crtc *drmcrtc;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
 
-	if (crtc < 0 || crtc >= dev->num_crtcs) {
+	if (pipe < 0 || pipe >= dev_priv->num_pipe) {
-		DRM_ERROR("Invalid crtc %d\n", crtc);
+		DRM_ERROR("Invalid crtc %d\n", pipe);
 		return -EINVAL;
 	}
 
 	/* Get drm_crtc to timestamp: */
-	drmcrtc = intel_get_crtc_for_pipe(dev, crtc);
+	crtc = intel_get_crtc_for_pipe(dev, pipe);
+	if (crtc == NULL) {
+		DRM_ERROR("Invalid crtc %d\n", pipe);
+		return -EINVAL;
+	}
+
+	if (!crtc->enabled) {
+		DRM_DEBUG_KMS("crtc %d is disabled\n", pipe);
+		return -EBUSY;
+	}
 
 	/* Helper routine in DRM core does all the work: */
-	return drm_calc_vbltimestamp_from_scanoutpos(dev, crtc, max_error,
+	return drm_calc_vbltimestamp_from_scanoutpos(dev, pipe, max_error,
-						     vblank_time, flags, drmcrtc);
+						     vblank_time, flags,
+						     crtc);
 }
 
 /*
@@ -348,8 +359,12 @@ static void notify_ring(struct drm_device *dev,
 			struct intel_ring_buffer *ring)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 seqno = ring->get_seqno(ring);
+	u32 seqno;
 
+	if (ring->obj == NULL)
+		return;
+
+	seqno = ring->get_seqno(ring);
 	trace_i915_gem_request_complete(dev, seqno);
 
 	ring->irq_seqno = seqno;
@@ -831,6 +846,8 @@ static void i915_capture_error_state(struct drm_device *dev)
 		i++;
 	error->pinned_bo_count = i - error->active_bo_count;
 
+	error->active_bo = NULL;
+	error->pinned_bo = NULL;
 	if (i) {
 		error->active_bo = kmalloc(sizeof(*error->active_bo)*i,
 					   GFP_ATOMIC);
@@ -1278,12 +1295,12 @@ static int i915_wait_irq(struct drm_device * dev, int irq_nr)
 	if (master_priv->sarea_priv)
 		master_priv->sarea_priv->perf_boxes |= I915_BOX_WAIT;
 
-	ret = -ENODEV;
 	if (ring->irq_get(ring)) {
 		DRM_WAIT_ON(ret, ring->irq_queue, 3 * DRM_HZ,
 			    READ_BREADCRUMB(dev_priv) >= irq_nr);
 		ring->irq_put(ring);
-	}
+	} else if (wait_for(READ_BREADCRUMB(dev_priv) >= irq_nr, 3000))
+		ret = -EBUSY;
 
 	if (ret == -EBUSY) {
 		DRM_ERROR("EBUSY -- rec: %d emitted: %d\n",

drivers/gpu/drm/i915/i915_reg.h

@@ -513,6 +513,10 @@
 #define   GEN6_BLITTER_SYNC_STATUS			(1 << 24)
 #define   GEN6_BLITTER_USER_INTERRUPT			(1 << 22)
 
+#define GEN6_BLITTER_ECOSKPD	0x221d0
+#define   GEN6_BLITTER_LOCK_SHIFT			16
+#define   GEN6_BLITTER_FBC_NOTIFY			(1<<3)
+
 #define GEN6_BSD_SLEEP_PSMI_CONTROL	0x12050
 #define   GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_MODIFY_MASK	(1 << 16)
 #define   GEN6_BSD_SLEEP_PSMI_CONTROL_RC_ILDL_MESSAGE_DISABLE		(1 << 0)
@@ -2626,6 +2630,8 @@
 #define DISPLAY_PORT_PLL_BIOS_2         0x46014
 
 #define PCH_DSPCLK_GATE_D	0x42020
+# define DPFCUNIT_CLOCK_GATE_DISABLE		(1 << 9)
+# define DPFCRUNIT_CLOCK_GATE_DISABLE		(1 << 8)
 # define DPFDUNIT_CLOCK_GATE_DISABLE		(1 << 7)
 # define DPARBUNIT_CLOCK_GATE_DISABLE		(1 << 5)
 

drivers/gpu/drm/i915/intel_display.c

@@ -1213,6 +1213,26 @@ static bool g4x_fbc_enabled(struct drm_device *dev)
 	return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
 }
 
+static void sandybridge_blit_fbc_update(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 blt_ecoskpd;
+
+	/* Make sure blitter notifies FBC of writes */
+	__gen6_force_wake_get(dev_priv);
+	blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
+	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
+		GEN6_BLITTER_LOCK_SHIFT;
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
+			 GEN6_BLITTER_LOCK_SHIFT);
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	POSTING_READ(GEN6_BLITTER_ECOSKPD);
+	__gen6_force_wake_put(dev_priv);
+}
+
 static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
 {
 	struct drm_device *dev = crtc->dev;
@@ -1266,6 +1286,7 @@ static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
 		I915_WRITE(SNB_DPFC_CTL_SA,
 			   SNB_CPU_FENCE_ENABLE | dev_priv->cfb_fence);
 		I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
+		sandybridge_blit_fbc_update(dev);
 	}
 
 	DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
@@ -6286,7 +6307,9 @@ void intel_enable_clock_gating(struct drm_device *dev)
 
 		if (IS_GEN5(dev)) {
 			/* Required for FBC */
-			dspclk_gate |= DPFDUNIT_CLOCK_GATE_DISABLE;
+			dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
+				DPFCRUNIT_CLOCK_GATE_DISABLE |
+				DPFDUNIT_CLOCK_GATE_DISABLE;
 			/* Required for CxSR */
 			dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
 

drivers/gpu/drm/i915/intel_opregion.c

@@ -26,6 +26,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/acpi_io.h>
 #include <acpi/video.h>
 
 #include "drmP.h"
@@ -476,7 +477,7 @@ int intel_opregion_setup(struct drm_device *dev)
 		return -ENOTSUPP;
 	}
 
-	base = ioremap(asls, OPREGION_SIZE);
+	base = acpi_os_ioremap(asls, OPREGION_SIZE);
 	if (!base)
 		return -ENOMEM;
 

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -34,6 +34,14 @@
 #include "i915_trace.h"
 #include "intel_drv.h"
 
+static inline int ring_space(struct intel_ring_buffer *ring)
+{
+	int space = (ring->head & HEAD_ADDR) - (ring->tail + 8);
+	if (space < 0)
+		space += ring->size;
+	return space;
+}
+
 static u32 i915_gem_get_seqno(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
@@ -204,11 +212,9 @@ static int init_ring_common(struct intel_ring_buffer *ring)
 	if (!drm_core_check_feature(ring->dev, DRIVER_MODESET))
 		i915_kernel_lost_context(ring->dev);
 	else {
-		ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
+		ring->head = I915_READ_HEAD(ring);
 		ring->tail = I915_READ_TAIL(ring) & TAIL_ADDR;
-		ring->space = ring->head - (ring->tail + 8);
+		ring->space = ring_space(ring);
-		if (ring->space < 0)
-			ring->space += ring->size;
 	}
 
 	return 0;
@@ -921,32 +927,34 @@ static int intel_wrap_ring_buffer(struct intel_ring_buffer *ring)
 	}
 
 	ring->tail = 0;
-	ring->space = ring->head - 8;
+	ring->space = ring_space(ring);
 
 	return 0;
 }
 
 int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
 {
-	int reread = 0;
 	struct drm_device *dev = ring->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	unsigned long end;
 	u32 head;
 
+	/* If the reported head position has wrapped or hasn't advanced,
+	 * fallback to the slow and accurate path.
+	 */
+	head = intel_read_status_page(ring, 4);
+	if (head > ring->head) {
+		ring->head = head;
+		ring->space = ring_space(ring);
+		if (ring->space >= n)
+			return 0;
+	}
+
 	trace_i915_ring_wait_begin (dev);
 	end = jiffies + 3 * HZ;
 	do {
-		/* If the reported head position has wrapped or hasn't advanced,
+		ring->head = I915_READ_HEAD(ring);
-		 * fallback to the slow and accurate path.
+		ring->space = ring_space(ring);
-		 */
-		head = intel_read_status_page(ring, 4);
-		if (reread)
-			head = I915_READ_HEAD(ring);
-		ring->head = head & HEAD_ADDR;
-		ring->space = ring->head - (ring->tail + 8);
-		if (ring->space < 0)
-			ring->space += ring->size;
 		if (ring->space >= n) {
 			trace_i915_ring_wait_end(dev);
 			return 0;
@@ -961,7 +969,6 @@ int intel_wait_ring_buffer(struct intel_ring_buffer *ring, int n)
 		msleep(1);
 		if (atomic_read(&dev_priv->mm.wedged))
 			return -EAGAIN;
-		reread = 1;
 	} while (!time_after(jiffies, end));
 	trace_i915_ring_wait_end (dev);
 	return -EBUSY;
@@ -1292,6 +1299,48 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 	return intel_init_ring_buffer(dev, ring);
 }
 
+int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size)
+{
+	drm_i915_private_t *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring = &dev_priv->ring[RCS];
+
+	*ring = render_ring;
+	if (INTEL_INFO(dev)->gen >= 6) {
+		ring->add_request = gen6_add_request;
+		ring->irq_get = gen6_render_ring_get_irq;
+		ring->irq_put = gen6_render_ring_put_irq;
+	} else if (IS_GEN5(dev)) {
+		ring->add_request = pc_render_add_request;
+		ring->get_seqno = pc_render_get_seqno;
+	}
+
+	ring->dev = dev;
+	INIT_LIST_HEAD(&ring->active_list);
+	INIT_LIST_HEAD(&ring->request_list);
+	INIT_LIST_HEAD(&ring->gpu_write_list);
+
+	ring->size = size;
+	ring->effective_size = ring->size;
+	if (IS_I830(ring->dev))
+		ring->effective_size -= 128;
+
+	ring->map.offset = start;
+	ring->map.size = size;
+	ring->map.type = 0;
+	ring->map.flags = 0;
+	ring->map.mtrr = 0;
+
+	drm_core_ioremap_wc(&ring->map, dev);
+	if (ring->map.handle == NULL) {
+		DRM_ERROR("can not ioremap virtual address for"
+			  " ring buffer\n");
+		return -ENOMEM;
+	}
+
+	ring->virtual_start = (void __force __iomem *)ring->map.handle;
+	return 0;
+}
+
 int intel_init_bsd_ring_buffer(struct drm_device *dev)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;

drivers/gpu/drm/i915/intel_ringbuffer.h

@@ -166,4 +166,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev);
 u32 intel_ring_get_active_head(struct intel_ring_buffer *ring);
 void intel_ring_setup_status_page(struct intel_ring_buffer *ring);
 
+/* DRI warts */
+int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size);
+
 #endif /* _INTEL_RINGBUFFER_H_ */

drivers/gpu/drm/nouveau/nouveau_drv.c

@@ -234,9 +234,9 @@ nouveau_pci_suspend(struct pci_dev *pdev, pm_message_t pm_state)
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
 
-	acquire_console_sem();
+	console_lock();
 	nouveau_fbcon_set_suspend(dev, 1);
-	release_console_sem();
+	console_unlock();
 	nouveau_fbcon_restore_accel(dev);
 	return 0;
 
@@ -359,9 +359,9 @@ nouveau_pci_resume(struct pci_dev *pdev)
 		nv_crtc->lut.depth = 0;
 	}
 
-	acquire_console_sem();
+	console_lock();
 	nouveau_fbcon_set_suspend(dev, 0);
-	release_console_sem();
+	console_unlock();
 
 	nouveau_fbcon_zfill_all(dev);
 

drivers/gpu/drm/radeon/atombios_crtc.c

@@ -606,14 +606,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 				args.v1.usPixelClock = cpu_to_le16(mode->clock / 10);
 				args.v1.ucTransmitterID = radeon_encoder->encoder_id;
 				args.v1.ucEncodeMode = encoder_mode;
-				if (encoder_mode == ATOM_ENCODER_MODE_DP) {
+				if (ss_enabled)
-					if (ss_enabled)
-						args.v1.ucConfig |=
-							ADJUST_DISPLAY_CONFIG_SS_ENABLE;
-				} else if (encoder_mode == ATOM_ENCODER_MODE_LVDS) {
 					args.v1.ucConfig |=
 						ADJUST_DISPLAY_CONFIG_SS_ENABLE;
-				}
 
 				atom_execute_table(rdev->mode_info.atom_context,
 						   index, (uint32_t *)&args);
@@ -624,12 +619,12 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 				args.v3.sInput.ucTransmitterID = radeon_encoder->encoder_id;
 				args.v3.sInput.ucEncodeMode = encoder_mode;
 				args.v3.sInput.ucDispPllConfig = 0;
+				if (ss_enabled)
+					args.v3.sInput.ucDispPllConfig |=
+						DISPPLL_CONFIG_SS_ENABLE;
 				if (radeon_encoder->devices & (ATOM_DEVICE_DFP_SUPPORT)) {
 					struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 					if (encoder_mode == ATOM_ENCODER_MODE_DP) {
-						if (ss_enabled)
-							args.v3.sInput.ucDispPllConfig |=
-								DISPPLL_CONFIG_SS_ENABLE;
 						args.v3.sInput.ucDispPllConfig |=
 							DISPPLL_CONFIG_COHERENT_MODE;
 						/* 16200 or 27000 */
@@ -649,18 +644,11 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					}
 				} else if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
 					if (encoder_mode == ATOM_ENCODER_MODE_DP) {
-						if (ss_enabled)
-							args.v3.sInput.ucDispPllConfig |=
-								DISPPLL_CONFIG_SS_ENABLE;
 						args.v3.sInput.ucDispPllConfig |=
 							DISPPLL_CONFIG_COHERENT_MODE;
 						/* 16200 or 27000 */
 						args.v3.sInput.usPixelClock = cpu_to_le16(dp_clock / 10);
-					} else if (encoder_mode == ATOM_ENCODER_MODE_LVDS) {
+					} else if (encoder_mode != ATOM_ENCODER_MODE_LVDS) {
-						if (ss_enabled)
-							args.v3.sInput.ucDispPllConfig |=
-								DISPPLL_CONFIG_SS_ENABLE;
-					} else {
 						if (mode->clock > 165000)
 							args.v3.sInput.ucDispPllConfig |=
 								DISPPLL_CONFIG_DUAL_LINK;

drivers/gpu/drm/radeon/evergreen.c

@@ -2201,6 +2201,9 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev)
 	struct evergreen_mc_save save;
 	u32 grbm_reset = 0;
 
+	if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE))
+		return 0;
+
 	dev_info(rdev->dev, "GPU softreset \n");
 	dev_info(rdev->dev, "  GRBM_STATUS=0x%08X\n",
 		RREG32(GRBM_STATUS));

drivers/gpu/drm/radeon/r100.c

@@ -3522,7 +3522,7 @@ int r100_ring_test(struct radeon_device *rdev)
 	if (i < rdev->usec_timeout) {
 		DRM_INFO("ring test succeeded in %d usecs\n", i);
 	} else {
-		DRM_ERROR("radeon: ring test failed (sracth(0x%04X)=0x%08X)\n",
+		DRM_ERROR("radeon: ring test failed (scratch(0x%04X)=0x%08X)\n",
 			  scratch, tmp);
 		r = -EINVAL;
 	}

drivers/gpu/drm/radeon/r600.c

@@ -1287,6 +1287,9 @@ int r600_gpu_soft_reset(struct radeon_device *rdev)
 			S_008014_CB2_BUSY(1) | S_008014_CB3_BUSY(1);
 	u32 tmp;
 
+	if (!(RREG32(GRBM_STATUS) & GUI_ACTIVE))
+		return 0;
+
 	dev_info(rdev->dev, "GPU softreset \n");
 	dev_info(rdev->dev, "  R_008010_GRBM_STATUS=0x%08X\n",
 		RREG32(R_008010_GRBM_STATUS));

drivers/gpu/drm/radeon/radeon_atombios.c

@@ -387,15 +387,11 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 			*line_mux = 0x90;
 	}
 
-	/* mac rv630 */
+	/* mac rv630, rv730, others */
-	if ((dev->pdev->device == 0x9588) &&
+	if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) &&
-	    (dev->pdev->subsystem_vendor == 0x106b) &&
+	    (*connector_type == DRM_MODE_CONNECTOR_DVII)) {
-	    (dev->pdev->subsystem_device == 0x00a6)) {
+		*connector_type = DRM_MODE_CONNECTOR_9PinDIN;
-		if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) &&
+		*line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1;
-		    (*connector_type == DRM_MODE_CONNECTOR_DVII)) {
-			*connector_type = DRM_MODE_CONNECTOR_9PinDIN;
-			*line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1;
-		}
 	}
 
 	/* ASUS HD 3600 XT board lists the DVI port as HDMI */

drivers/gpu/drm/radeon/radeon_device.c

@@ -891,9 +891,9 @@ int radeon_suspend_kms(struct drm_device *dev, pm_message_t state)
 		pci_disable_device(dev->pdev);
 		pci_set_power_state(dev->pdev, PCI_D3hot);
 	}
-	acquire_console_sem();
+	console_lock();
 	radeon_fbdev_set_suspend(rdev, 1);
-	release_console_sem();
+	console_unlock();
 	return 0;
 }
 
@@ -905,11 +905,11 @@ int radeon_resume_kms(struct drm_device *dev)
 	if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
 		return 0;
 
-	acquire_console_sem();
+	console_lock();
 	pci_set_power_state(dev->pdev, PCI_D0);
 	pci_restore_state(dev->pdev);
 	if (pci_enable_device(dev->pdev)) {
-		release_console_sem();
+		console_unlock();
 		return -1;
 	}
 	pci_set_master(dev->pdev);
@@ -920,7 +920,7 @@ int radeon_resume_kms(struct drm_device *dev)
 	radeon_restore_bios_scratch_regs(rdev);
 
 	radeon_fbdev_set_suspend(rdev, 0);
-	release_console_sem();
+	console_unlock();
 
 	/* reset hpd state */
 	radeon_hpd_init(rdev);

drivers/gpu/drm/radeon/radeon_drv.c

@@ -48,7 +48,7 @@
  * - 2.5.0 - add get accel 2 to work around ddx breakage for evergreen
  * - 2.6.0 - add tiling config query (r6xx+), add initial HiZ support (r300->r500)
  *   2.7.0 - fixups for r600 2D tiling support. (no external ABI change), add eg dyn gpr regs
- *   2.8.0 - pageflip support, r500 US_FORMAT regs. r500 ARGB2101010 colorbuf, r300->r500 CMASK
+ *   2.8.0 - pageflip support, r500 US_FORMAT regs. r500 ARGB2101010 colorbuf, r300->r500 CMASK, clock crystal query
  */
 #define KMS_DRIVER_MAJOR	2
 #define KMS_DRIVER_MINOR	8

drivers/gpu/drm/radeon/radeon_irq_kms.c

@@ -110,11 +110,14 @@ void radeon_driver_irq_uninstall_kms(struct drm_device *dev)
 
 int radeon_irq_kms_init(struct radeon_device *rdev)
 {
+	int i;
 	int r = 0;
 
 	INIT_WORK(&rdev->hotplug_work, radeon_hotplug_work_func);
 
 	spin_lock_init(&rdev->irq.sw_lock);
+	for (i = 0; i < rdev->num_crtc; i++)
+		spin_lock_init(&rdev->irq.pflip_lock[i]);
 	r = drm_vblank_init(rdev->ddev, rdev->num_crtc);
 	if (r) {
 		return r;

drivers/gpu/drm/radeon/radeon_kms.c

@@ -201,6 +201,10 @@ int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file *filp)
 		}
 		radeon_set_filp_rights(dev, &rdev->cmask_filp, filp, &value);
 		break;
+	case RADEON_INFO_CLOCK_CRYSTAL_FREQ:
+		/* return clock value in KHz */
+		value = rdev->clock.spll.reference_freq * 10;
+		break;
 	default:
 		DRM_DEBUG_KMS("Invalid request %d\n", info->request);
 		return -EINVAL;

drivers/gpu/vga/vgaarb.c

@@ -636,7 +636,7 @@ int vga_client_register(struct pci_dev *pdev, void *cookie,
 			void (*irq_set_state)(void *cookie, bool state),
 			unsigned int (*set_vga_decode)(void *cookie, bool decode))
 {
-	int ret = -1;
+	int ret = -ENODEV;
 	struct vga_device *vgadev;
 	unsigned long flags;
 

drivers/idle/intel_idle.c

@@ -263,7 +263,7 @@ static void __setup_broadcast_timer(void *arg)
 	clockevents_notify(reason, &cpu);
 }
 
-static int __cpuinit setup_broadcast_cpuhp_notify(struct notifier_block *n,
+static int setup_broadcast_cpuhp_notify(struct notifier_block *n,
 		unsigned long action, void *hcpu)
 {
 	int hotcpu = (unsigned long)hcpu;
@@ -273,15 +273,11 @@ static int __cpuinit setup_broadcast_cpuhp_notify(struct notifier_block *n,
 		smp_call_function_single(hotcpu, __setup_broadcast_timer,
 			(void *)true, 1);
 		break;
-	case CPU_DOWN_PREPARE:
-		smp_call_function_single(hotcpu, __setup_broadcast_timer,
-			(void *)false, 1);
-		break;
 	}
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata setup_broadcast_notifier = {
+static struct notifier_block setup_broadcast_notifier = {
 	.notifier_call = setup_broadcast_cpuhp_notify,
 };
 

drivers/input/keyboard/Kconfig

@@ -343,6 +343,16 @@ config KEYBOARD_NOMADIK
 	  To compile this driver as a module, choose M here: the
 	  module will be called nmk-ske-keypad.
 
+config KEYBOARD_TEGRA
+	tristate "NVIDIA Tegra internal matrix keyboard controller support"
+	depends on ARCH_TEGRA
+	help
+	  Say Y here if you want to use a matrix keyboard connected directly
+	  to the internal keyboard controller on Tegra SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tegra-kbc.
+
 config KEYBOARD_OPENCORES
 	tristate "OpenCores Keyboard Controller"
 	help

drivers/input/keyboard/Makefile

@@ -42,6 +42,7 @@ obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
+obj-$(CONFIG_KEYBOARD_TEGRA)		+= tegra-kbc.o
 obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
 obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o

drivers/input/keyboard/gpio_keys.c

@@ -322,7 +322,7 @@ static void gpio_keys_report_event(struct gpio_button_data *bdata)
 	struct gpio_keys_button *button = bdata->button;
 	struct input_dev *input = bdata->input;
 	unsigned int type = button->type ?: EV_KEY;
-	int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ button->active_low;
+	int state = (gpio_get_value_cansleep(button->gpio) ? 1 : 0) ^ button->active_low;
 
 	input_event(input, type, button->code, !!state);
 	input_sync(input);
@@ -410,8 +410,8 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 	if (!button->can_disable)
 		irqflags |= IRQF_SHARED;
 
-	error = request_irq(irq, gpio_keys_isr, irqflags, desc, bdata);
+	error = request_any_context_irq(irq, gpio_keys_isr, irqflags, desc, bdata);
-	if (error) {
+	if (error < 0) {
 		dev_err(dev, "Unable to claim irq %d; error %d\n",
 			irq, error);
 		goto fail3;