hwmon: (ucd9000) Add support for UCD90160 Power Supply Sequencer
The UCD90160 Power Supply Sequencer reuses the existing register layout, so just an id addition was required. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com> [groeck: Updated description, ordered alphabetically, added documentation] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
parent
43943ebb9f
commit
50b2b02c40
|
@ -2,12 +2,13 @@ Kernel driver ucd9000
|
|||
=====================
|
||||
|
||||
Supported chips:
|
||||
* TI UCD90120, UCD90124, UCD9090, and UCD90910
|
||||
Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910'
|
||||
* TI UCD90120, UCD90124, UCD90160, UCD9090, and UCD90910
|
||||
Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd9090', 'ucd90910'
|
||||
Addresses scanned: -
|
||||
Datasheets:
|
||||
http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
|
||||
http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
|
||||
http://focus.ti.com/lit/ds/symlink/ucd90160.pdf
|
||||
http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
|
||||
http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
|
||||
|
||||
|
@ -32,6 +33,13 @@ interrupts, cascading, or other system functions. Twelve of these pins offer PWM
|
|||
functionality. Using these pins, the UCD90124 offers support for fan control,
|
||||
margining, and general-purpose PWM functions.
|
||||
|
||||
The UCD90160 is a 16-rail PMBus/I2C addressable power-supply sequencer and
|
||||
monitor. The device integrates a 12-bit ADC for monitoring up to 16 power-supply
|
||||
voltage inputs. Twenty-six GPIO pins can be used for power supply enables,
|
||||
power-on reset signals, external interrupts, cascading, or other system
|
||||
functions. Twelve of these pins offer PWM functionality. Using these pins, the
|
||||
UCD90160 offers support for margining, and general-purpose PWM functions.
|
||||
|
||||
The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
|
||||
monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
|
||||
voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
|
||||
|
|
|
@ -126,12 +126,12 @@ config SENSORS_TPS40422
|
|||
be called tps40422.
|
||||
|
||||
config SENSORS_UCD9000
|
||||
tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
|
||||
tristate "TI UCD90120, UCD90124, UCD90160, UCD9090, UCD90910"
|
||||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for TI
|
||||
UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
|
||||
Controllers.
|
||||
UCD90120, UCD90124, UCD90160, UCD9090, UCD90910, Sequencer and System
|
||||
Health Controllers.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called ucd9000.
|
||||
|
|
|
@ -28,7 +28,7 @@
|
|||
#include <linux/i2c/pmbus.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 };
|
||||
enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd9090, ucd90910 };
|
||||
|
||||
#define UCD9000_MONITOR_CONFIG 0xd5
|
||||
#define UCD9000_NUM_PAGES 0xd6
|
||||
|
@ -112,6 +112,7 @@ static const struct i2c_device_id ucd9000_id[] = {
|
|||
{"ucd9000", ucd9000},
|
||||
{"ucd90120", ucd90120},
|
||||
{"ucd90124", ucd90124},
|
||||
{"ucd90160", ucd90160},
|
||||
{"ucd9090", ucd9090},
|
||||
{"ucd90910", ucd90910},
|
||||
{}
|
||||
|
|
Loading…
Reference in New Issue