[ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init.

Since we have moved a large proportion of the PM code to the common
support area, remove the cpu specific name from the initialisation
function.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Documentation/arm/Samsung-S3C24XX/Suspend.txt

@@ -40,13 +40,13 @@ Resuming
 Machine Support
 ---------------
 
-  The machine specific functions must call the s3c2410_pm_init() function
+  The machine specific functions must call the s3c_pm_init() function
   to say that its bootloader is capable of resuming. This can be as
   simple as adding the following to the machine's definition:
 
-  INITMACHINE(s3c2410_pm_init)
+  INITMACHINE(s3c_pm_init)
 
-  A board can do its own setup before calling s3c2410_pm_init, if it
+  A board can do its own setup before calling s3c_pm_init, if it
   needs to setup anything else for power management support.
 
   There is currently no support for over-riding the default method of
@@ -74,7 +74,7 @@ statuc void __init machine_init(void)
 
 	enable_irq_wake(IRQ_EINT0);
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 

arch/arm/mach-s3c2410/mach-h1940.c

@@ -203,7 +203,7 @@ static void __init h1940_map_io(void)
 #ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 static void __init h1940_init_irq(void)

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -355,7 +355,7 @@ static void __init qt2410_machine_init(void)
 	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
-	s3c2410_pm_init();
+	s3c_pm_init();
 }
 
 MACHINE_START(QT2410, "QT2410")

arch/arm/mach-s3c2412/mach-jive.c

@@ -630,7 +630,7 @@ static void __init jive_machine_init(void)
 
 	/* initialise the power management now we've setup everything. */
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 
 	s3c_device_nand.dev.platform_data = &jive_nand_info;
 

arch/arm/mach-s3c2440/mach-rx3715.c

@@ -203,7 +203,7 @@ static void __init rx3715_init_machine(void)
 #ifdef CONFIG_PM_H1940
 	memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
 #endif
-	s3c2410_pm_init();
+	s3c_pm_init();
 
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));

arch/arm/plat-s3c/include/plat/pm.h

@@ -9,7 +9,7 @@
  * published by the Free Software Foundation.
 */
 
-/* s3c2410_pm_init
+/* s3c_pm_init
  *
  * called from board at initialisation time to setup the power
  * management
@@ -17,11 +17,11 @@
 
 #ifdef CONFIG_PM
 
-extern __init int s3c2410_pm_init(void);
+extern __init int s3c_pm_init(void);
 
 #else
 
-static inline int s3c2410_pm_init(void)
+static inline int s3c_pm_init(void)
 {
 	return 0;
 }

arch/arm/plat-s3c/pm.c

@@ -316,14 +316,14 @@ static struct platform_suspend_ops s3c_pm_ops = {
 	.valid		= suspend_valid_only_mem,
 };
 
-/* s3c2410_pm_init
+/* s3c_pm_init
  *
  * Attach the power management functions. This should be called
  * from the board specific initialisation if the board supports
  * it.
 */
 
-int __init s3c2410_pm_init(void)
+int __init s3c_pm_init(void)
 {
 	printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
 

arch/arm/plat-s3c24xx/common-smdk.c

@@ -201,5 +201,5 @@ void __init smdk_machine_init(void)
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
-	s3c2410_pm_init();
+	s3c_pm_init();
 }

arch/arm/plat-s3c24xx/pm-simtec.c

@@ -61,7 +61,7 @@ static __init int pm_simtec_init(void)
 
 	__raw_writel(gstatus4, S3C2410_GSTATUS4);
 
-	return s3c2410_pm_init();
+	return s3c_pm_init();
 }
 
 arch_initcall(pm_simtec_init);