net: Add device tree support to LPC32xx
This patch adds device tree support for lpc_eth.c.
The runtime option for MII/RMII is solved via the "phy-mode" property, SRAM
("IRAM") usage for DMA can be chosen via "use-iram".
Signed-off-by: Roland Stigge <stigge@antcom.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Roland Stigge
parent
b41a216daf
commit
4de02e4a28
|
|
@ -0,0 +1,24 @@
|
|||
* NXP LPC32xx SoC Ethernet Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "nxp,lpc-eth"
|
||||
- reg: Address and length of the register set for the device
|
||||
- interrupts: Should contain ethernet controller interrupt
|
||||
|
||||
Optional properties:
|
||||
- phy-mode: String, operation mode of the PHY interface.
|
||||
Supported values are: "mii", "rmii" (default)
|
||||
- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
|
||||
- local-mac-address : 6 bytes, mac address
|
||||
|
||||
Example:
|
||||
|
||||
mac: ethernet@31060000 {
|
||||
compatible = "nxp,lpc-eth";
|
||||
reg = <0x31060000 0x1000>;
|
||||
interrupt-parent = <&mic>;
|
||||
interrupts = <29 0>;
|
||||
|
||||
phy-mode = "rmii";
|
||||
use-iram;
|
||||
};
|
||||
|
|
@ -40,6 +40,7 @@
|
|||
#include <linux/skbuff.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_net.h>
|
||||
#include <linux/types.h>
|
||||
|
||||
|
|
@ -340,13 +341,17 @@
|
|||
*/
|
||||
#define LPC_POWERDOWN_MACAHB (1 << 31)
|
||||
|
||||
/* Upon the upcoming introduction of device tree usage in LPC32xx,
|
||||
* lpc_phy_interface_mode() and use_iram_for_net() will be extended with a
|
||||
* device parameter for access to device tree information at runtime, instead
|
||||
* of defining the values at compile time
|
||||
*/
|
||||
static inline phy_interface_t lpc_phy_interface_mode(void)
|
||||
static phy_interface_t lpc_phy_interface_mode(struct device *dev)
|
||||
{
|
||||
if (dev && dev->of_node) {
|
||||
const char *mode = of_get_property(dev->of_node,
|
||||
"phy-mode", NULL);
|
||||
if (mode && !strcmp(mode, "mii"))
|
||||
return PHY_INTERFACE_MODE_MII;
|
||||
return PHY_INTERFACE_MODE_RMII;
|
||||
}
|
||||
|
||||
/* non-DT */
|
||||
#ifdef CONFIG_ARCH_LPC32XX_MII_SUPPORT
|
||||
return PHY_INTERFACE_MODE_MII;
|
||||
#else
|
||||
|
|
@ -354,12 +359,16 @@ static inline phy_interface_t lpc_phy_interface_mode(void)
|
|||
#endif
|
||||
}
|
||||
|
||||
static inline int use_iram_for_net(void)
|
||||
static bool use_iram_for_net(struct device *dev)
|
||||
{
|
||||
if (dev && dev->of_node)
|
||||
return of_property_read_bool(dev->of_node, "use-iram");
|
||||
|
||||
/* non-DT */
|
||||
#ifdef CONFIG_ARCH_LPC32XX_IRAM_FOR_NET
|
||||
return 1;
|
||||
return true;
|
||||
#else
|
||||
return 0;
|
||||
return false;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
@ -664,7 +673,7 @@ static void __lpc_eth_init(struct netdata_local *pldat)
|
|||
LPC_ENET_CLRT(pldat->net_base));
|
||||
writel(LPC_IPGR_LOAD_PART2(0x12), LPC_ENET_IPGR(pldat->net_base));
|
||||
|
||||
if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
|
||||
if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
|
||||
writel(LPC_COMMAND_PASSRUNTFRAME,
|
||||
LPC_ENET_COMMAND(pldat->net_base));
|
||||
else {
|
||||
|
|
@ -804,12 +813,13 @@ static int lpc_mii_probe(struct net_device *ndev)
|
|||
}
|
||||
|
||||
/* Attach to the PHY */
|
||||
if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
|
||||
if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
|
||||
netdev_info(ndev, "using MII interface\n");
|
||||
else
|
||||
netdev_info(ndev, "using RMII interface\n");
|
||||
phydev = phy_connect(ndev, dev_name(&phydev->dev),
|
||||
&lpc_handle_link_change, 0, lpc_phy_interface_mode());
|
||||
&lpc_handle_link_change, 0,
|
||||
lpc_phy_interface_mode(&pldat->pdev->dev));
|
||||
|
||||
if (IS_ERR(phydev)) {
|
||||
netdev_err(ndev, "Could not attach to PHY\n");
|
||||
|
|
@ -843,7 +853,7 @@ static int lpc_mii_init(struct netdata_local *pldat)
|
|||
}
|
||||
|
||||
/* Setup MII mode */
|
||||
if (lpc_phy_interface_mode() == PHY_INTERFACE_MODE_MII)
|
||||
if (lpc_phy_interface_mode(&pldat->pdev->dev) == PHY_INTERFACE_MODE_MII)
|
||||
writel(LPC_COMMAND_PASSRUNTFRAME,
|
||||
LPC_ENET_COMMAND(pldat->net_base));
|
||||
else {
|
||||
|
|
@ -1315,18 +1325,26 @@ static const struct net_device_ops lpc_netdev_ops = {
|
|||
static int lpc_eth_drv_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
struct resource *dma_res;
|
||||
struct net_device *ndev;
|
||||
struct netdata_local *pldat;
|
||||
struct phy_device *phydev;
|
||||
dma_addr_t dma_handle;
|
||||
int irq, ret;
|
||||
u32 tmp;
|
||||
|
||||
/* Setup network interface for RMII or MII mode */
|
||||
tmp = __raw_readl(LPC32XX_CLKPWR_MACCLK_CTRL);
|
||||
tmp &= ~LPC32XX_CLKPWR_MACCTRL_PINS_MSK;
|
||||
if (lpc_phy_interface_mode(&pdev->dev) == PHY_INTERFACE_MODE_MII)
|
||||
tmp |= LPC32XX_CLKPWR_MACCTRL_USE_MII_PINS;
|
||||
else
|
||||
tmp |= LPC32XX_CLKPWR_MACCTRL_USE_RMII_PINS;
|
||||
__raw_writel(tmp, LPC32XX_CLKPWR_MACCLK_CTRL);
|
||||
|
||||
/* Get platform resources */
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
if ((!res) || (!dma_res) || (irq < 0) || (irq >= NR_IRQS)) {
|
||||
if ((!res) || (irq < 0) || (irq >= NR_IRQS)) {
|
||||
dev_err(&pdev->dev, "error getting resources.\n");
|
||||
ret = -ENXIO;
|
||||
goto err_exit;
|
||||
|
|
@ -1389,17 +1407,19 @@ static int lpc_eth_drv_probe(struct platform_device *pdev)
|
|||
sizeof(struct txrx_desc_t) + sizeof(struct rx_status_t));
|
||||
pldat->dma_buff_base_v = 0;
|
||||
|
||||
if (use_iram_for_net()) {
|
||||
dma_handle = dma_res->start;
|
||||
if (use_iram_for_net(&pldat->pdev->dev)) {
|
||||
dma_handle = LPC32XX_IRAM_BASE;
|
||||
if (pldat->dma_buff_size <= lpc32xx_return_iram_size())
|
||||
pldat->dma_buff_base_v =
|
||||
io_p2v(dma_res->start);
|
||||
io_p2v(LPC32XX_IRAM_BASE);
|
||||
else
|
||||
netdev_err(ndev,
|
||||
"IRAM not big enough for net buffers, using SDRAM instead.\n");
|
||||
}
|
||||
|
||||
if (pldat->dma_buff_base_v == 0) {
|
||||
pldat->pdev->dev.coherent_dma_mask = 0xFFFFFFFF;
|
||||
pldat->pdev->dev.dma_mask = &pldat->pdev->dev.coherent_dma_mask;
|
||||
pldat->dma_buff_size = PAGE_ALIGN(pldat->dma_buff_size);
|
||||
|
||||
/* Allocate a chunk of memory for the DMA ethernet buffers
|
||||
|
|
@ -1488,7 +1508,7 @@ err_out_unregister_netdev:
|
|||
platform_set_drvdata(pdev, NULL);
|
||||
unregister_netdev(ndev);
|
||||
err_out_dma_unmap:
|
||||
if (!use_iram_for_net() ||
|
||||
if (!use_iram_for_net(&pldat->pdev->dev) ||
|
||||
pldat->dma_buff_size > lpc32xx_return_iram_size())
|
||||
dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
|
||||
pldat->dma_buff_base_v,
|
||||
|
|
@ -1515,7 +1535,7 @@ static int lpc_eth_drv_remove(struct platform_device *pdev)
|
|||
unregister_netdev(ndev);
|
||||
platform_set_drvdata(pdev, NULL);
|
||||
|
||||
if (!use_iram_for_net() ||
|
||||
if (!use_iram_for_net(&pldat->pdev->dev) ||
|
||||
pldat->dma_buff_size > lpc32xx_return_iram_size())
|
||||
dma_free_coherent(&pldat->pdev->dev, pldat->dma_buff_size,
|
||||
pldat->dma_buff_base_v,
|
||||
|
|
@ -1584,6 +1604,14 @@ static int lpc_eth_drv_resume(struct platform_device *pdev)
|
|||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id lpc_eth_match[] = {
|
||||
{ .compatible = "nxp,lpc-eth" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, lpc_eth_match);
|
||||
#endif
|
||||
|
||||
static struct platform_driver lpc_eth_driver = {
|
||||
.probe = lpc_eth_drv_probe,
|
||||
.remove = __devexit_p(lpc_eth_drv_remove),
|
||||
|
|
@ -1593,6 +1621,7 @@ static struct platform_driver lpc_eth_driver = {
|
|||
#endif
|
||||
.driver = {
|
||||
.name = MODNAME,
|
||||
.of_match_table = of_match_ptr(lpc_eth_match),
|
||||
},
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue