[Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as well

https://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3858

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
This commit is contained in:
Sonic Zhang 2008-02-02 14:29:25 +08:00 committed by Bryan Wu
parent 095455682e
commit 4cb4f22b19
6 changed files with 10 additions and 19 deletions

View File

@ -53,7 +53,6 @@
#ifdef CONFIG_SERIAL_BFIN_DMA
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart);
#else
static void bfin_serial_do_work(struct work_struct *work);
static void bfin_serial_tx_chars(struct bfin_serial_port *uart);
#endif
@ -372,8 +371,9 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
return IRQ_HANDLED;
}
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
static void bfin_serial_do_work(struct work_struct *work)
{
struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue);
@ -607,22 +607,17 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart)
{
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
unsigned int status;
# ifdef CONFIG_SERIAL_BFIN_DMA
struct uart_info *info = uart->port.info;
struct tty_struct *tty = info->tty;
status = bfin_serial_get_mctrl(&uart->port);
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS)) {
tty->hw_stopped = 1;
schedule_work(&uart->cts_workqueue);
} else {
tty->hw_stopped = 0;
}
# else
status = bfin_serial_get_mctrl(&uart->port);
uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
if (!(status & TIOCM_CTS))
schedule_work(&uart->cts_workqueue);
# endif
#endif
}
@ -939,10 +934,9 @@ static void __init bfin_serial_init_ports(void)
bfin_serial_ports[i].rx_dma_channel =
bfin_serial_resource[i].uart_rx_dma_channel;
init_timer(&(bfin_serial_ports[i].rx_dma_timer));
#else
INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work);
bfin_serial_ports[i].cts_pin =
bfin_serial_resource[i].uart_cts_pin;
bfin_serial_ports[i].rts_pin =

View File

@ -67,10 +67,9 @@ struct bfin_serial_port {
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
struct work_struct cts_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif

View File

@ -56,12 +56,12 @@ struct bfin_serial_port {
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
struct work_struct cts_workqueue;
# if ANOMALY_05000230
unsigned int anomaly_threshold;
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif

View File

@ -67,10 +67,9 @@ struct bfin_serial_port {
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
struct work_struct cts_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif

View File

@ -69,10 +69,9 @@ struct bfin_serial_port {
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
struct work_struct cts_workqueue;
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif

View File

@ -56,12 +56,12 @@ struct bfin_serial_port {
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
#else
struct work_struct cts_workqueue;
# if ANOMALY_05000230
unsigned int anomaly_threshold;
# endif
#endif
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
struct work_struct cts_workqueue;
int cts_pin;
int rts_pin;
#endif