ARM: 6084/1: ux500: move UART devices to devices.c

The three PL011 UARTs are common among Ux500 SoCs, so move them to
devices.c.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This commit is contained in:
Rabin Vincent 2010-05-03 08:18:38 +01:00 committed by Russell King
parent 9e4e7fe1a9
commit 4b27aa4140
3 changed files with 27 additions and 25 deletions

View File

@ -26,28 +26,6 @@
#include <mach/setup.h>
#include <mach/devices.h>
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
/* These are active devices on this board */
static struct amba_device uart0_device = {
.dev = { .init_name = "uart0" },
__MEM_4K_RESOURCE(U8500_UART0_BASE),
.irq = {IRQ_UART0, NO_IRQ},
};
static struct amba_device uart1_device = {
.dev = { .init_name = "uart1" },
__MEM_4K_RESOURCE(U8500_UART1_BASE),
.irq = {IRQ_UART1, NO_IRQ},
};
static struct amba_device uart2_device = {
.dev = { .init_name = "uart2" },
__MEM_4K_RESOURCE(U8500_UART2_BASE),
.irq = {IRQ_UART2, NO_IRQ},
};
static void ab4500_spi_cs_control(u32 command)
{
/* set the FRM signal, which is CS - TODO */
@ -157,9 +135,9 @@ U8500_I2C_PDEVICE(2);
U8500_I2C_PDEVICE(3);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
&uart1_device,
&uart2_device,
&ux500_uart0_device,
&ux500_uart1_device,
&ux500_uart2_device,
&u8500_ssp0_device,
};

View File

@ -14,6 +14,9 @@
#include <mach/hardware.h>
#include <mach/setup.h>
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
struct amba_device ux500_pl031_device = {
.dev = {
.init_name = "pl031",
@ -26,6 +29,24 @@ struct amba_device ux500_pl031_device = {
.irq = {IRQ_RTC_RTT, NO_IRQ},
};
struct amba_device ux500_uart0_device = {
.dev = { .init_name = "uart0" },
__MEM_4K_RESOURCE(UX500_UART0_BASE),
.irq = {IRQ_UART0, NO_IRQ},
};
struct amba_device ux500_uart1_device = {
.dev = { .init_name = "uart1" },
__MEM_4K_RESOURCE(UX500_UART1_BASE),
.irq = {IRQ_UART1, NO_IRQ},
};
struct amba_device ux500_uart2_device = {
.dev = { .init_name = "uart2" },
__MEM_4K_RESOURCE(UX500_UART2_BASE),
.irq = {IRQ_UART2, NO_IRQ},
};
void __init amba_add_devices(struct amba_device *devs[], int num)
{
int i;

View File

@ -12,5 +12,8 @@ struct amba_device;
extern struct amba_device ux500_pl031_device;
extern struct amba_device u8500_ssp0_device;
extern struct amba_device ux500_uart0_device;
extern struct amba_device ux500_uart1_device;
extern struct amba_device ux500_uart2_device;
#endif