From 4a31f2eff3b8fcf009db35f89eb222ed7835b6b9 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 27 Apr 2010 12:24:42 +0200 Subject: [PATCH] ARM: mx3: Fix a race condition in mxcmmc From cefcdab08d1c9636c4a7290bc2bbe937d051bce4 Mon Sep 17 00:00:00 2001 From: Volker Ernst Date: Mon, 26 Apr 2010 22:51:07 +0200 Subject: [PATCH] ARM: mx3: Fix a race condition in mxcmmc This fixes a race condition regarding interrupt bits in the SDHC controller driver code. In case of PIO-transfer it does not clear SDHC-status bit#11/12 in the INT-handler anymore. INT-handler might be called during an ongoing PIO-data-transfer (with some other INT-flag set) and PIO-transfer depends on these bits being set to detect the end of the data-transfer. This also means that at the end of PIO- transfer that PIO-software has to clear these bits itself. However in case of DMA-transfer these bits have to be cleared in the INT-handler, because they are used to generate INTs then. Works solid, no more problems here, can transfer big files. Signed-off-by: Volker Ernst Acked-by: Daniel Mack Cc: Andy Green Signed-off-by: Sascha Hauer --- drivers/mmc/host/mxcmmc.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 2c53024ee439..ec18e3b60342 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -489,6 +489,9 @@ static void mxcmci_datawork(struct work_struct *work) struct mxcmci_host *host = container_of(work, struct mxcmci_host, datawork); int datastat = mxcmci_transfer_data(host); + + writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE, + host->base + MMC_REG_STATUS); mxcmci_finish_data(host, datastat); if (host->req->stop) { @@ -553,7 +556,8 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) u32 stat; stat = readl(host->base + MMC_REG_STATUS); - writel(stat & ~STATUS_SDIO_INT_ACTIVE, host->base + MMC_REG_STATUS); + writel(stat & ~(STATUS_SDIO_INT_ACTIVE | STATUS_DATA_TRANS_DONE | + STATUS_WRITE_OP_DONE), host->base + MMC_REG_STATUS); dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat); @@ -561,6 +565,13 @@ static irqreturn_t mxcmci_irq(int irq, void *devid) sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio; spin_unlock_irqrestore(&host->lock, flags); +#ifdef HAS_DMA + if (mxcmci_use_dma(host) && + (stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE))) + writel(STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE, + host->base + MMC_REG_STATUS); +#endif + if (sdio_irq) { writel(STATUS_SDIO_INT_ACTIVE, host->base + MMC_REG_STATUS); mmc_signal_sdio_irq(host->mmc);