From 490b63e6de63d13e82110f4cb5f1aa31dd27245a Mon Sep 17 00:00:00 2001
From: Stephen Boyd <stephen.boyd@linaro.org>
Date: Wed, 25 Jan 2017 14:32:43 -0800
Subject: [PATCH] usb: chipidea: Configure phy for appropriate mode
When the qcom chipidea controller is used with an extcon, we need
to signal device mode or host mode to the phy so it can configure
itself for the correct mode. This should be done after the phy is
powered up, so that the register writes work correctly. Add in
the appropriate phy_set_mode() call here.
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/core.c | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index bcb3a9c360d4..79ad8e91632e 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -427,13 +427,21 @@ void ci_platform_configure(struct ci_hdrc *ci)
is_device_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_DC;
is_host_mode = hw_read(ci, OP_USBMODE, USBMODE_CM) == USBMODE_CM_HC;
- if (is_device_mode &&
- (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING))
- hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+ if (is_device_mode) {
+ phy_set_mode(ci->phy, PHY_MODE_USB_DEVICE);
- if (is_host_mode &&
- (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING))
- hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
+ if (ci->platdata->flags & CI_HDRC_DISABLE_DEVICE_STREAMING)
+ hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+ USBMODE_CI_SDIS);
+ }
+
+ if (is_host_mode) {
+ phy_set_mode(ci->phy, PHY_MODE_USB_HOST);
+
+ if (ci->platdata->flags & CI_HDRC_DISABLE_HOST_STREAMING)
+ hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS,
+ USBMODE_CI_SDIS);
+ }
if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) {
if (ci->hw_bank.lpm)