hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control 

When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.

Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.

Cc: Schuyler Patton <spatton@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Grygorii Strashko 2017-05-08 14:21:21 -05:00 committed by David S. Miller
parent 242d3a49a2
commit 48f5bccc60
1 changed files with 16 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
drivers/net/ethernet/ti/cpsw.c
View File

@ -287,6 +287,10 @@ struct cpsw_ss_regs {
/* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */
#define CPSW_V1_SEQ_ID_OFS_SHIFT 16
#define CPSW_MAX_BLKS_TX 15
#define CPSW_MAX_BLKS_TX_SHIFT 4
#define CPSW_MAX_BLKS_RX 5
struct cpsw_host_regs {
u32 max_blks;
u32 blk_cnt;
@ -1278,11 +1282,23 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
switch (cpsw->version) {
case CPSW_VERSION_1:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
/* Increase RX FIFO size to 5 for supporting fullduplex
* flow control mode
*/
slave_write(slave,
(CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS);
break;
case CPSW_VERSION_2:
case CPSW_VERSION_3:
case CPSW_VERSION_4:
slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
/* Increase RX FIFO size to 5 for supporting fullduplex
* flow control mode
*/
slave_write(slave,
(CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS);
break;
}