diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 0c065f77658f..3957d4edaa74 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -7,18 +7,18 @@ Required properties :
  - compatible : Should be "microchip,usb251xb" or one of the specific types:
 	"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
 	"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
- - hub-reset-gpios : Should specify the gpio for hub reset
+ - reset-gpios : Should specify the gpio for hub reset
+ - reg : I2C address on the selected bus (default is <0x2C>)
 
 Optional properties :
- - reg : I2C address on the selected bus (default is <0x2C>)
  - skip-config : Skip Hub configuration, but only send the USB-Attach command
- - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424)
- - product-id : USB Product ID of the hub (16 bit, default depends on type)
- - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3)
- - language-id : USB Language ID (16 bit, default is 0x0000)
- - manufacturer : USB Manufacturer string (max 31 characters long)
- - product : USB Product string (max 31 characters long)
- - serial : USB Serial string (max 31 characters long)
+ - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
+ - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
+ - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
+ - language-id : Set USB Language ID (16 bit, default is 0x0000)
+ - manufacturer : Set USB Manufacturer string (max 31 characters long)
+ - product : Set USB Product string (max 31 characters long)
+ - serial : Set USB Serial string (max 31 characters long)
  - {bus,self}-powered : selects between self- and bus-powered operation (default
 	is self-powered)
  - disable-hi-speed : disable USB Hi-Speed support
@@ -31,8 +31,10 @@ Optional properties :
 	(default is individual)
  - dynamic-power-switching : enable auto-switching from self- to bus-powered
 	operation if the local power source is removed or unavailable
- - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms)
- - compound-device : indicated the hub is part of a compound device
+ - oc-delay-us : Delay time (in microseconds) for filtering the over-current
+	sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
+	an invalid value is given, the default is used instead.
+ - compound-device : indicate the hub is part of a compound device
  - port-mapping-mode : enable port mapping mode
  - string-support : enable string descriptor support (required for manufacturer,
 	product and serial string configuration)
@@ -40,34 +42,15 @@ Optional properties :
 	device connected.
  - sp-disabled-ports : Specifies the ports which will be self-power disabled
  - bp-disabled-ports : Specifies the ports which will be bus-power disabled
- - max-sp-power : Specifies the maximum current the hub consumes from an
-	upstream port when operating as self-powered hub including the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 2).
- - max-bp-power : Specifies the maximum current the hub consumes from an
-	upstream port when operating as bus-powered hub including the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 100).
- - max-sp-current : Specifies the maximum current the hub consumes from an
-	upstream port when operating as self-powered hub EXCLUDING the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 2).
- - max-bp-current : Specifies the maximum current the hub consumes from an
-	upstream port when operating as bus-powered hub EXCLUDING the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 100).
- - power-on-time : Specifies the time it takes from the time the host initiates
-	the power-on sequence to a port until the port has adequate power. The
-	value is given in ms in a 0 - 510 range (default is 100ms).
+ - power-on-time-ms : Specifies the time it takes from the time the host
+	initiates the power-on sequence to a port until the port has adequate
+	power. The value is given in ms in a 0 - 510 range (default is 100ms).
 
 Examples:
 	usb2512b@2c {
 		compatible = "microchip,usb2512b";
-		hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		reg = <0x2c>;
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	};
 
 	usb2514b@2c {
diff --git a/MAINTAINERS b/MAINTAINERS
index c265a5fe4848..c776906f67a9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8307,7 +8307,6 @@ M:	Richard Leitner <richard.leitner@skidata.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/misc/usb251xb.c
-F:	include/linux/platform_data/usb251xb.h
 F:	Documentation/devicetree/bindings/usb/usb251xb.txt
 
 MICROSOFT SURFACE PRO 3 BUTTON DRIVER
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 2092e46b1380..f8d0747810e7 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -250,6 +250,7 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;
 		dwc3_omap_write_utmi_ctrl(omap, val);
+		break;
 
 	case OMAP_DWC3_VBUS_OFF:
 		val = dwc3_omap_read_utmi_ctrl(omap);
@@ -392,7 +393,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap)
 {
 	u32			reg;
 	struct device_node	*node = omap->dev->of_node;
-	int			utmi_mode = 0;
+	u32			utmi_mode = 0;
 
 	reg = dwc3_omap_read_utmi_ctrl(omap);
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 4db97ecae885..0d75158e43fe 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1342,6 +1342,68 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 		if (r == req) {
 			/* wait until it is processed */
 			dwc3_stop_active_transfer(dwc, dep->number, true);
+
+			/*
+			 * If request was already started, this means we had to
+			 * stop the transfer. With that we also need to ignore
+			 * all TRBs used by the request, however TRBs can only
+			 * be modified after completion of END_TRANSFER
+			 * command. So what we do here is that we wait for
+			 * END_TRANSFER completion and only after that, we jump
+			 * over TRBs by clearing HWO and incrementing dequeue
+			 * pointer.
+			 *
+			 * Note that we have 2 possible types of transfers here:
+			 *
+			 * i) Linear buffer request
+			 * ii) SG-list based request
+			 *
+			 * SG-list based requests will have r->num_pending_sgs
+			 * set to a valid number (> 0). Linear requests,
+			 * normally use a single TRB.
+			 *
+			 * For each of these two cases, if r->unaligned flag is
+			 * set, one extra TRB has been used to align transfer
+			 * size to wMaxPacketSize.
+			 *
+			 * All of these cases need to be taken into
+			 * consideration so we don't mess up our TRB ring
+			 * pointers.
+			 */
+			wait_event_lock_irq(dep->wait_end_transfer,
+					!(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
+					dwc->lock);
+
+			if (!r->trb)
+				goto out1;
+
+			if (r->num_pending_sgs) {
+				struct dwc3_trb *trb;
+				int i = 0;
+
+				for (i = 0; i < r->num_pending_sgs; i++) {
+					trb = r->trb + i;
+					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+					dwc3_ep_inc_deq(dep);
+				}
+
+				if (r->unaligned) {
+					trb = r->trb + r->num_pending_sgs + 1;
+					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+					dwc3_ep_inc_deq(dep);
+				}
+			} else {
+				struct dwc3_trb *trb = r->trb;
+
+				trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+				dwc3_ep_inc_deq(dep);
+
+				if (r->unaligned) {
+					trb = r->trb + 1;
+					trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+					dwc3_ep_inc_deq(dep);
+				}
+			}
 			goto out1;
 		}
 		dev_err(dwc->dev, "request %p was not queued to %s\n",
@@ -1352,6 +1414,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 
 out1:
 	/* giveback the request */
+	dep->queued_requests--;
 	dwc3_gadget_giveback(dep, req, -ECONNRESET);
 
 out0:
@@ -2126,12 +2189,12 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 		return 1;
 	}
 
-	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
-		return 1;
-
 	count = trb->size & DWC3_TRB_SIZE_MASK;
 	req->remaining += count;
 
+	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
+		return 1;
+
 	if (dep->direction) {
 		if (count) {
 			trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
@@ -3228,15 +3291,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
-	int ret;
-
 	if (!dwc->gadget_driver)
 		return 0;
 
-	ret = dwc3_gadget_run_stop(dwc, false, false);
-	if (ret < 0)
-		return ret;
-
+	dwc3_gadget_run_stop(dwc, false, false);
 	dwc3_disconnect_gadget(dwc);
 	__dwc3_gadget_stop(dwc);
 
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 3129bcf74d7d..265e223ab645 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -28,23 +28,23 @@ struct dwc3;
 #define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
 
 /* DEPCFG parameter 1 */
-#define DWC3_DEPCFG_INT_NUM(n)		((n) << 0)
+#define DWC3_DEPCFG_INT_NUM(n)		(((n) & 0x1f) << 0)
 #define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8)
 #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9)
 #define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10)
 #define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11)
 #define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13)
-#define DWC3_DEPCFG_BINTERVAL_M1(n)	((n) << 16)
+#define DWC3_DEPCFG_BINTERVAL_M1(n)	(((n) & 0xff) << 16)
 #define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24)
-#define DWC3_DEPCFG_EP_NUMBER(n)	((n) << 25)
+#define DWC3_DEPCFG_EP_NUMBER(n)	(((n) & 0x1f) << 25)
 #define DWC3_DEPCFG_BULK_BASED		(1 << 30)
 #define DWC3_DEPCFG_FIFO_BASED		(1 << 31)
 
 /* DEPCFG parameter 0 */
-#define DWC3_DEPCFG_EP_TYPE(n)		((n) << 1)
-#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	((n) << 3)
-#define DWC3_DEPCFG_FIFO_NUMBER(n)	((n) << 17)
-#define DWC3_DEPCFG_BURST_SIZE(n)	((n) << 22)
+#define DWC3_DEPCFG_EP_TYPE(n)		(((n) & 0x3) << 1)
+#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	(((n) & 0x7ff) << 3)
+#define DWC3_DEPCFG_FIFO_NUMBER(n)	(((n) & 0x1f) << 17)
+#define DWC3_DEPCFG_BURST_SIZE(n)	(((n) & 0xf) << 22)
 #define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
 /* This applies for core versions earlier than 1.94a */
 #define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31)
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 78c44979dde3..cbff3b02840d 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -269,6 +269,7 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
 		ret = unregister_gadget(gi);
 		if (ret)
 			goto err;
+		kfree(name);
 	} else {
 		if (gi->composite.gadget_driver.udc_name) {
 			ret = -EBUSY;
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index a5b7cd615698..a0085571824d 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1834,11 +1834,14 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	while(count--) {
 		struct usb_endpoint_descriptor *ds;
+		struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+		int needs_comp_desc = false;
 		int desc_idx;
 
-		if (ffs->gadget->speed == USB_SPEED_SUPER)
+		if (ffs->gadget->speed == USB_SPEED_SUPER) {
 			desc_idx = 2;
-		else if (ffs->gadget->speed == USB_SPEED_HIGH)
+			needs_comp_desc = true;
+		} else if (ffs->gadget->speed == USB_SPEED_HIGH)
 			desc_idx = 1;
 		else
 			desc_idx = 0;
@@ -1855,6 +1858,14 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 
 		ep->ep->driver_data = ep;
 		ep->ep->desc = ds;
+
+		comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
+				USB_DT_ENDPOINT_SIZE);
+		ep->ep->maxburst = comp_desc->bMaxBurst + 1;
+
+		if (needs_comp_desc)
+			ep->ep->comp_desc = comp_desc;
+
 		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {
 			epfile->ep = ep;
@@ -2253,7 +2264,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type,
 
 		if (len < sizeof(*d) ||
 		    d->bFirstInterfaceNumber >= ffs->interfaces_count ||
-		    d->Reserved1)
+		    !d->Reserved1)
 			return -EINVAL;
 		for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i)
 			if (d->Reserved2[i])
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 27ed51b5082f..29b41b5dee04 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -258,13 +258,6 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 	memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
 	v4l2_event_queue(&uvc->vdev, &v4l2_event);
 
-	/* Pass additional setup data to userspace */
-	if (uvc->event_setup_out && uvc->event_length) {
-		uvc->control_req->length = uvc->event_length;
-		return usb_ep_queue(uvc->func.config->cdev->gadget->ep0,
-			uvc->control_req, GFP_ATOMIC);
-	}
-
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 79a2d8fba6b6..a2c916869293 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1781,8 +1781,10 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	spin_lock_irq (&dev->lock);
 	value = -EINVAL;
-	if (dev->buf)
+	if (dev->buf) {
+		kfree(kbuf);
 		goto fail;
+	}
 	dev->buf = kbuf;
 
 	/* full or low speed config */
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 11bbce28bc23..2035906b8ced 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -610,7 +610,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 {
 	struct usba_ep *ep = to_usba_ep(_ep);
 	struct usba_udc *udc = ep->udc;
-	unsigned long flags, ept_cfg, maxpacket;
+	unsigned long flags, maxpacket;
 	unsigned int nr_trans;
 
 	DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
@@ -630,7 +630,7 @@ usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	ep->is_in = 0;
 
 	DBG(DBG_ERR, "%s: EPT_CFG = 0x%lx (maxpacket = %lu)\n",
-			ep->ep.name, ept_cfg, maxpacket);
+			ep->ep.name, ep->ept_cfg, maxpacket);
 
 	if (usb_endpoint_dir_in(desc)) {
 		ep->is_in = 1;
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index c60abe3a68f9..8cabc5944d5f 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -1031,6 +1031,8 @@ static int dummy_udc_probe(struct platform_device *pdev)
 	int		rc;
 
 	dum = *((void **)dev_get_platdata(&pdev->dev));
+	/* Clear usb_gadget region for new registration to udc-core */
+	memzero_explicit(&dum->gadget, sizeof(struct usb_gadget));
 	dum->gadget.name = gadget_name;
 	dum->gadget.ops = &dummy_ops;
 	dum->gadget.max_speed = USB_SPEED_SUPER;
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 85504419ab31..3828c2ec8623 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -1146,15 +1146,15 @@ static int scan_dma_completions(struct net2280_ep *ep)
 	 */
 	while (!list_empty(&ep->queue)) {
 		struct net2280_request	*req;
-		u32			tmp;
+		u32 req_dma_count;
 
 		req = list_entry(ep->queue.next,
 				struct net2280_request, queue);
 		if (!req->valid)
 			break;
 		rmb();
-		tmp = le32_to_cpup(&req->td->dmacount);
-		if ((tmp & BIT(VALID_BIT)) != 0)
+		req_dma_count = le32_to_cpup(&req->td->dmacount);
+		if ((req_dma_count & BIT(VALID_BIT)) != 0)
 			break;
 
 		/* SHORT_PACKET_TRANSFERRED_INTERRUPT handles "usb-short"
@@ -1163,40 +1163,41 @@ static int scan_dma_completions(struct net2280_ep *ep)
 		 */
 		if (unlikely(req->td->dmadesc == 0)) {
 			/* paranoia */
-			tmp = readl(&ep->dma->dmacount);
-			if (tmp & DMA_BYTE_COUNT_MASK)
+			u32 const ep_dmacount = readl(&ep->dma->dmacount);
+
+			if (ep_dmacount & DMA_BYTE_COUNT_MASK)
 				break;
 			/* single transfer mode */
-			dma_done(ep, req, tmp, 0);
+			dma_done(ep, req, req_dma_count, 0);
 			num_completed++;
 			break;
 		} else if (!ep->is_in &&
 			   (req->req.length % ep->ep.maxpacket) &&
 			   !(ep->dev->quirks & PLX_PCIE)) {
 
-			tmp = readl(&ep->regs->ep_stat);
+			u32 const ep_stat = readl(&ep->regs->ep_stat);
 			/* AVOID TROUBLE HERE by not issuing short reads from
 			 * your gadget driver.  That helps avoids errata 0121,
 			 * 0122, and 0124; not all cases trigger the warning.
 			 */
-			if ((tmp & BIT(NAK_OUT_PACKETS)) == 0) {
+			if ((ep_stat & BIT(NAK_OUT_PACKETS)) == 0) {
 				ep_warn(ep->dev, "%s lost packet sync!\n",
 						ep->ep.name);
 				req->req.status = -EOVERFLOW;
 			} else {
-				tmp = readl(&ep->regs->ep_avail);
-				if (tmp) {
+				u32 const ep_avail = readl(&ep->regs->ep_avail);
+				if (ep_avail) {
 					/* fifo gets flushed later */
 					ep->out_overflow = 1;
 					ep_dbg(ep->dev,
 						"%s dma, discard %d len %d\n",
-						ep->ep.name, tmp,
+						ep->ep.name, ep_avail,
 						req->req.length);
 					req->req.status = -EOVERFLOW;
 				}
 			}
 		}
-		dma_done(ep, req, tmp, 0);
+		dma_done(ep, req, req_dma_count, 0);
 		num_completed++;
 	}
 
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index e1335ad5bce9..832c4fdbe985 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -2534,9 +2534,10 @@ static int pxa_udc_remove(struct platform_device *_dev)
 	usb_del_gadget_udc(&udc->gadget);
 	pxa_cleanup_debugfs(udc);
 
-	if (!IS_ERR_OR_NULL(udc->transceiver))
+	if (!IS_ERR_OR_NULL(udc->transceiver)) {
 		usb_unregister_notifier(udc->transceiver, &pxa27x_udc_phy);
-	usb_put_phy(udc->transceiver);
+		usb_put_phy(udc->transceiver);
+	}
 
 	udc->transceiver = NULL;
 	the_controller = NULL;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 414e3c376dbb..5302f988e7e6 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -350,7 +350,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		case USB_PORT_FEAT_SUSPEND:
 			dev_dbg(hcd->self.controller, "SetPortFeat: SUSPEND\n");
-			if (valid_port(wIndex)) {
+			if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
 				ohci_at91_port_suspend(ohci_at91->sfr_regmap,
 						       1);
 				return 0;
@@ -393,7 +393,7 @@ static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 		case USB_PORT_FEAT_SUSPEND:
 			dev_dbg(hcd->self.controller, "ClearPortFeature: SUSPEND\n");
-			if (valid_port(wIndex)) {
+			if (valid_port(wIndex) && ohci_at91->sfr_regmap) {
 				ohci_at91_port_suspend(ohci_at91->sfr_regmap,
 						       0);
 				return 0;
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 363d125300ea..2b4a00fa735d 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -109,7 +109,7 @@ static void xhci_print_cap_regs(struct xhci_hcd *xhci)
 	xhci_dbg(xhci, "RTSOFF 0x%x:\n", temp & RTSOFF_MASK);
 
 	/* xhci 1.1 controllers have the HCCPARAMS2 register */
-	if (hci_version > 100) {
+	if (hci_version > 0x100) {
 		temp = readl(&xhci->cap_regs->hcc_params2);
 		xhci_dbg(xhci, "HCC PARAMS2 0x%x:\n", (unsigned int) temp);
 		xhci_dbg(xhci, "  HC %s Force save context capability",
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 9066ec9e0c2e..67d5dc79b6b5 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -382,7 +382,6 @@ static int usb_wakeup_of_property_parse(struct xhci_hcd_mtk *mtk,
 
 static int xhci_mtk_setup(struct usb_hcd *hcd);
 static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = {
-	.extra_priv_size = sizeof(struct xhci_hcd),
 	.reset = xhci_mtk_setup,
 };
 
@@ -678,13 +677,13 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		goto power_off_phys;
 	}
 
-	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
-		xhci->shared_hcd->can_do_streams = 1;
-
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto put_usb3_hcd;
 
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto dealloc_usb2_hcd;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 6d33b42ffcf5..bd02a6cd8e2c 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -286,6 +286,8 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
 	struct clk *clk = xhci->clk;
 
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
+
 	usb_remove_hcd(xhci->shared_hcd);
 	usb_phy_shutdown(hcd->usb_phy);
 
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index a59fafb4b329..74436f8ca538 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1308,7 +1308,6 @@ static int tegra_xhci_setup(struct usb_hcd *hcd)
 }
 
 static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
-	.extra_priv_size = sizeof(struct xhci_hcd),
 	.reset = tegra_xhci_setup,
 };
 
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 095778ff984d..37c63cb39714 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -781,12 +781,6 @@ static int iowarrior_probe(struct usb_interface *interface,
 	iface_desc = interface->cur_altsetting;
 	dev->product_id = le16_to_cpu(udev->descriptor.idProduct);
 
-	if (iface_desc->desc.bNumEndpoints < 1) {
-		dev_err(&interface->dev, "Invalid number of endpoints\n");
-		retval = -EINVAL;
-		goto error;
-	}
-
 	/* set up the endpoint information */
 	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
 		endpoint = &iface_desc->endpoint[i].desc;
@@ -797,6 +791,21 @@ static int iowarrior_probe(struct usb_interface *interface,
 			/* this one will match for the IOWarrior56 only */
 			dev->int_out_endpoint = endpoint;
 	}
+
+	if (!dev->int_in_endpoint) {
+		dev_err(&interface->dev, "no interrupt-in endpoint found\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	if (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) {
+		if (!dev->int_out_endpoint) {
+			dev_err(&interface->dev, "no interrupt-out endpoint found\n");
+			retval = -ENODEV;
+			goto error;
+		}
+	}
+
 	/* we have to check the report_size often, so remember it in the endianness suitable for our machine */
 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 4e18600dc9b4..91f66d68bcb7 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -375,18 +375,24 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	if (of_get_property(np, "dynamic-power-switching", NULL))
 		hub->conf_data2 |= BIT(7);
 
-	if (of_get_property(np, "oc-delay-100us", NULL)) {
-		hub->conf_data2 &= ~BIT(5);
-		hub->conf_data2 &= ~BIT(4);
-	} else if (of_get_property(np, "oc-delay-4ms", NULL)) {
-		hub->conf_data2 &= ~BIT(5);
-		hub->conf_data2 |= BIT(4);
-	} else if (of_get_property(np, "oc-delay-8ms", NULL)) {
-		hub->conf_data2 |= BIT(5);
-		hub->conf_data2 &= ~BIT(4);
-	} else if (of_get_property(np, "oc-delay-16ms", NULL)) {
-		hub->conf_data2 |= BIT(5);
-		hub->conf_data2 |= BIT(4);
+	if (!of_property_read_u32(np, "oc-delay-us", property_u32)) {
+		if (*property_u32 == 100) {
+			/* 100 us*/
+			hub->conf_data2 &= ~BIT(5);
+			hub->conf_data2 &= ~BIT(4);
+		} else if (*property_u32 == 4000) {
+			/* 4 ms */
+			hub->conf_data2 &= ~BIT(5);
+			hub->conf_data2 |= BIT(4);
+		} else if (*property_u32 == 16000) {
+			/* 16 ms */
+			hub->conf_data2 |= BIT(5);
+			hub->conf_data2 |= BIT(4);
+		} else {
+			/* 8 ms (DEFAULT) */
+			hub->conf_data2 |= BIT(5);
+			hub->conf_data2 &= ~BIT(4);
+		}
 	}
 
 	if (of_get_property(np, "compound-device", NULL))
@@ -432,30 +438,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		}
 	}
 
-	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
-	if (!of_property_read_u32(np, "max-sp-power", property_u32))
-		hub->max_power_sp = min_t(u8, be32_to_cpu(*property_u32) / 2,
-					  250);
-
-	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
-	if (!of_property_read_u32(np, "max-bp-power", property_u32))
-		hub->max_power_bp = min_t(u8, be32_to_cpu(*property_u32) / 2,
-					  250);
-
-	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
-	if (!of_property_read_u32(np, "max-sp-current", property_u32))
-		hub->max_current_sp = min_t(u8, be32_to_cpu(*property_u32) / 2,
-					    250);
-
-	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
-	if (!of_property_read_u32(np, "max-bp-current", property_u32))
-		hub->max_current_bp = min_t(u8, be32_to_cpu(*property_u32) / 2,
-					    250);
-
 	hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
-	if (!of_property_read_u32(np, "power-on-time", property_u32))
-		hub->power_on_time = min_t(u8, be32_to_cpu(*property_u32) / 2,
-					   255);
+	if (!of_property_read_u32(np, "power-on-time-ms", property_u32))
+		hub->power_on_time = min_t(u8, *property_u32 / 2, 255);
 
 	if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1))
 		hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
@@ -492,6 +477,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
+	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
+	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
+	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
+	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
 	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_up = USB251XB_DEF_BOOST_UP;
 	hub->boost_x = USB251XB_DEF_BOOST_X;
diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c
index db68156568e6..b3b33cf7ddf6 100644
--- a/drivers/usb/phy/phy-isp1301.c
+++ b/drivers/usb/phy/phy-isp1301.c
@@ -33,6 +33,12 @@ static const struct i2c_device_id isp1301_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, isp1301_id);
 
+static const struct of_device_id isp1301_of_match[] = {
+	{.compatible = "nxp,isp1301" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, isp1301_of_match);
+
 static struct i2c_client *isp1301_i2c_client;
 
 static int __isp1301_write(struct isp1301 *isp, u8 reg, u8 value, u8 clear)
@@ -130,6 +136,7 @@ static int isp1301_remove(struct i2c_client *client)
 static struct i2c_driver isp1301_driver = {
 	.driver = {
 		.name = DRV_NAME,
+		.of_match_table = of_match_ptr(isp1301_of_match),
 	},
 	.probe = isp1301_probe,
 	.remove = isp1301_remove,
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index ab78111e0968..6537d3ca2797 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1500,7 +1500,7 @@ static int digi_read_oob_callback(struct urb *urb)
 		return -1;
 
 	/* handle each oob command */
-	for (i = 0; i < urb->actual_length - 4; i += 4) {
+	for (i = 0; i < urb->actual_length - 3; i += 4) {
 		opcode = buf[i];
 		line = buf[i + 1];
 		status = buf[i + 2];
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index ceaeebaa6f90..a76b95d32157 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -1674,6 +1674,12 @@ static void edge_interrupt_callback(struct urb *urb)
 	function    = TIUMP_GET_FUNC_FROM_CODE(data[0]);
 	dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__,
 		port_number, function, data[1]);
+
+	if (port_number >= edge_serial->serial->num_ports) {
+		dev_err(dev, "bad port number %d\n", port_number);
+		goto exit;
+	}
+
 	port = edge_serial->serial->port[port_number];
 	edge_port = usb_get_serial_port_data(port);
 	if (!edge_port) {
@@ -1755,7 +1761,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 
 	port_number = edge_port->port->port_number;
 
-	if (edge_port->lsr_event) {
+	if (urb->actual_length > 0 && edge_port->lsr_event) {
 		edge_port->lsr_event = 0;
 		dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n",
 			__func__, port_number, edge_port->lsr_mask, *data);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index a180b17d2432..dd706953b466 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -31,7 +31,6 @@
 #define BT_IGNITIONPRO_ID	0x2000
 
 /* function prototypes */
-static int  omninet_open(struct tty_struct *tty, struct usb_serial_port *port);
 static void omninet_process_read_urb(struct urb *urb);
 static void omninet_write_bulk_callback(struct urb *urb);
 static int  omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
@@ -60,7 +59,6 @@ static struct usb_serial_driver zyxel_omninet_device = {
 	.attach =		omninet_attach,
 	.port_probe =		omninet_port_probe,
 	.port_remove =		omninet_port_remove,
-	.open =			omninet_open,
 	.write =		omninet_write,
 	.write_room =		omninet_write_room,
 	.write_bulk_callback =	omninet_write_bulk_callback,
@@ -140,17 +138,6 @@ static int omninet_port_remove(struct usb_serial_port *port)
 	return 0;
 }
 
-static int omninet_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
-	struct usb_serial	*serial = port->serial;
-	struct usb_serial_port	*wport;
-
-	wport = serial->port[1];
-	tty_port_tty_set(&wport->port, tty);
-
-	return usb_serial_generic_open(tty, port);
-}
-
 #define OMNINET_HEADERLEN	4
 #define OMNINET_BULKOUTSIZE	64
 #define OMNINET_PAYLOADSIZE	(OMNINET_BULKOUTSIZE - OMNINET_HEADERLEN)
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 93c6c9b08daa..8a069aa154ed 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -200,6 +200,11 @@ static void safe_process_read_urb(struct urb *urb)
 	if (!safe)
 		goto out;
 
+	if (length < 2) {
+		dev_err(&port->dev, "malformed packet\n");
+		return;
+	}
+
 	fcs = fcs_compute10(data, length, CRC10_INITFCS);
 	if (fcs) {
 		dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 16cc18369111..9129f6cb8230 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2071,6 +2071,20 @@ UNUSUAL_DEV(  0x1370, 0x6828, 0x0110, 0x0110,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_IGNORE_RESIDUE ),
 
+/*
+ * Reported by Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
+ * The INIC-3619 bridge is used in the StarTech SLSODDU33B
+ * SATA-USB enclosure for slimline optical drives.
+ *
+ * The quirk enables MakeMKV to properly exchange keys with
+ * an installed BD drive.
+ */
+UNUSUAL_DEV(  0x13fd, 0x3609, 0x0209, 0x0209,
+		"Initio Corporation",
+		"INIC-3619",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Qinglin Ye <yestyle@gmail.com> */
 UNUSUAL_DEV(  0x13fe, 0x3600, 0x0100, 0x0100,
 		"Kingston",