regulator: hi655x: enable regulator for hi655x PMIC
Add the regulator driver for hi655x PMIC. Signed-off-by: Chen Feng <puck.chen@hisilicon.com> Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
16dc661e0e
commit
4618119b9b
|
@ -261,6 +261,14 @@ config REGULATOR_HI6421
|
|||
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
|
||||
of them come with support to either ECO (idle) or sleep mode.
|
||||
|
||||
config REGULATOR_HI655X
|
||||
tristate "Hisilicon HI655X PMIC regulators support"
|
||||
depends on ARCH_HISI || COMPILE_TEST
|
||||
depends on MFD_HI655X_PMIC && OF
|
||||
help
|
||||
This driver provides support for the voltage regulators of the
|
||||
Hisilicon Hi655x PMIC device.
|
||||
|
||||
config REGULATOR_ISL9305
|
||||
tristate "Intersil ISL9305 regulator"
|
||||
depends on I2C
|
||||
|
|
|
@ -34,6 +34,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
|
|||
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
|
||||
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
|
||||
obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
|
||||
|
|
|
@ -0,0 +1,227 @@
|
|||
/*
|
||||
* Device driver for regulators in Hi655x IC
|
||||
*
|
||||
* Copyright (c) 2016 Hisilicon.
|
||||
*
|
||||
* Authors:
|
||||
* Chen Feng <puck.chen@hisilicon.com>
|
||||
* Fei Wang <w.f@huawei.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
#include <linux/mfd/hi655x-pmic.h>
|
||||
|
||||
struct hi655x_regulator {
|
||||
unsigned int disable_reg;
|
||||
unsigned int status_reg;
|
||||
unsigned int ctrl_regs;
|
||||
unsigned int ctrl_mask;
|
||||
struct regulator_desc rdesc;
|
||||
};
|
||||
|
||||
/* LDO7 & LDO10 */
|
||||
static const unsigned int ldo7_voltages[] = {
|
||||
1800000, 1850000, 2850000, 2900000,
|
||||
3000000, 3100000, 3200000, 3300000,
|
||||
};
|
||||
|
||||
static const unsigned int ldo19_voltages[] = {
|
||||
1800000, 1850000, 1900000, 1750000,
|
||||
2800000, 2850000, 2900000, 3000000,
|
||||
};
|
||||
|
||||
static const unsigned int ldo22_voltages[] = {
|
||||
900000, 1000000, 1050000, 1100000,
|
||||
1150000, 1175000, 1185000, 1200000,
|
||||
};
|
||||
|
||||
enum hi655x_regulator_id {
|
||||
HI655X_LDO0,
|
||||
HI655X_LDO1,
|
||||
HI655X_LDO2,
|
||||
HI655X_LDO3,
|
||||
HI655X_LDO4,
|
||||
HI655X_LDO5,
|
||||
HI655X_LDO6,
|
||||
HI655X_LDO7,
|
||||
HI655X_LDO8,
|
||||
HI655X_LDO9,
|
||||
HI655X_LDO10,
|
||||
HI655X_LDO11,
|
||||
HI655X_LDO12,
|
||||
HI655X_LDO13,
|
||||
HI655X_LDO14,
|
||||
HI655X_LDO15,
|
||||
HI655X_LDO16,
|
||||
HI655X_LDO17,
|
||||
HI655X_LDO18,
|
||||
HI655X_LDO19,
|
||||
HI655X_LDO20,
|
||||
HI655X_LDO21,
|
||||
HI655X_LDO22,
|
||||
};
|
||||
|
||||
static int hi655x_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
unsigned int value = 0;
|
||||
|
||||
struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
|
||||
|
||||
regmap_read(rdev->regmap, regulator->status_reg, &value);
|
||||
return (value & BIT(regulator->ctrl_mask));
|
||||
}
|
||||
|
||||
static int hi655x_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
struct hi655x_regulator *regulator = rdev_get_drvdata(rdev);
|
||||
|
||||
ret = regmap_write(rdev->regmap, regulator->disable_reg,
|
||||
BIT(regulator->ctrl_mask));
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct regulator_ops hi655x_regulator_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = hi655x_disable,
|
||||
.is_enabled = hi655x_is_enabled,
|
||||
.list_voltage = regulator_list_voltage_table,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
};
|
||||
|
||||
static struct regulator_ops hi655x_ldo_linear_ops = {
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = hi655x_disable,
|
||||
.is_enabled = hi655x_is_enabled,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
};
|
||||
|
||||
#define HI655X_LDO(_ID, vreg, vmask, ereg, dreg, \
|
||||
sreg, cmask, vtable) { \
|
||||
.rdesc = { \
|
||||
.name = #_ID, \
|
||||
.of_match = of_match_ptr(#_ID), \
|
||||
.ops = &hi655x_regulator_ops, \
|
||||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = HI655X_##_ID, \
|
||||
.owner = THIS_MODULE, \
|
||||
.n_voltages = ARRAY_SIZE(vtable), \
|
||||
.volt_table = vtable, \
|
||||
.vsel_reg = HI655X_BUS_ADDR(vreg), \
|
||||
.vsel_mask = vmask, \
|
||||
.enable_reg = HI655X_BUS_ADDR(ereg), \
|
||||
.enable_mask = BIT(cmask), \
|
||||
}, \
|
||||
.disable_reg = HI655X_BUS_ADDR(dreg), \
|
||||
.status_reg = HI655X_BUS_ADDR(sreg), \
|
||||
.ctrl_mask = cmask, \
|
||||
}
|
||||
|
||||
#define HI655X_LDO_LINEAR(_ID, vreg, vmask, ereg, dreg, \
|
||||
sreg, cmask, minv, nvolt, vstep) { \
|
||||
.rdesc = { \
|
||||
.name = #_ID, \
|
||||
.of_match = of_match_ptr(#_ID), \
|
||||
.ops = &hi655x_ldo_linear_ops, \
|
||||
.regulators_node = of_match_ptr("regulators"), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.id = HI655X_##_ID, \
|
||||
.owner = THIS_MODULE, \
|
||||
.min_uV = minv, \
|
||||
.n_voltages = nvolt, \
|
||||
.uV_step = vstep, \
|
||||
.vsel_reg = HI655X_BUS_ADDR(vreg), \
|
||||
.vsel_mask = vmask, \
|
||||
.enable_reg = HI655X_BUS_ADDR(ereg), \
|
||||
.enable_mask = BIT(cmask), \
|
||||
}, \
|
||||
.disable_reg = HI655X_BUS_ADDR(dreg), \
|
||||
.status_reg = HI655X_BUS_ADDR(sreg), \
|
||||
.ctrl_mask = cmask, \
|
||||
}
|
||||
|
||||
static struct hi655x_regulator regulators[] = {
|
||||
HI655X_LDO_LINEAR(LDO2, 0x72, 0x07, 0x29, 0x2a, 0x2b, 0x01,
|
||||
2500000, 8, 100000),
|
||||
HI655X_LDO(LDO7, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x06, ldo7_voltages),
|
||||
HI655X_LDO(LDO10, 0x78, 0x07, 0x29, 0x2a, 0x2b, 0x01, ldo7_voltages),
|
||||
HI655X_LDO_LINEAR(LDO13, 0x7e, 0x07, 0x2c, 0x2d, 0x2e, 0x04,
|
||||
1600000, 8, 50000),
|
||||
HI655X_LDO_LINEAR(LDO14, 0x7f, 0x07, 0x2c, 0x2d, 0x2e, 0x05,
|
||||
2500000, 8, 100000),
|
||||
HI655X_LDO_LINEAR(LDO15, 0x80, 0x07, 0x2c, 0x2d, 0x2e, 0x06,
|
||||
1600000, 8, 50000),
|
||||
HI655X_LDO_LINEAR(LDO17, 0x82, 0x07, 0x2f, 0x30, 0x31, 0x00,
|
||||
2500000, 8, 100000),
|
||||
HI655X_LDO(LDO19, 0x84, 0x07, 0x2f, 0x30, 0x31, 0x02, ldo19_voltages),
|
||||
HI655X_LDO_LINEAR(LDO21, 0x86, 0x07, 0x2f, 0x30, 0x31, 0x04,
|
||||
1650000, 8, 50000),
|
||||
HI655X_LDO(LDO22, 0x87, 0x07, 0x2f, 0x30, 0x31, 0x05, ldo22_voltages),
|
||||
};
|
||||
|
||||
static int hi655x_regulator_probe(struct platform_device *pdev)
|
||||
{
|
||||
unsigned int i;
|
||||
struct hi655x_regulator *regulator;
|
||||
struct hi655x_pmic *pmic;
|
||||
struct regulator_config config = { };
|
||||
struct regulator_dev *rdev;
|
||||
|
||||
pmic = dev_get_drvdata(pdev->dev.parent);
|
||||
if (!pmic) {
|
||||
dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
regulator = devm_kzalloc(&pdev->dev, sizeof(*regulator), GFP_KERNEL);
|
||||
if (!regulator)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, regulator);
|
||||
|
||||
config.dev = pdev->dev.parent;
|
||||
config.regmap = pmic->regmap;
|
||||
config.driver_data = regulator;
|
||||
for (i = 0; i < ARRAY_SIZE(regulators); i++) {
|
||||
rdev = devm_regulator_register(&pdev->dev,
|
||||
®ulators[i].rdesc,
|
||||
&config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
||||
regulator->rdesc.name);
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver hi655x_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "hi655x-regulator",
|
||||
},
|
||||
.probe = hi655x_regulator_probe,
|
||||
};
|
||||
module_platform_driver(hi655x_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("Chen Feng <puck.chen@hisilicon.com>");
|
||||
MODULE_DESCRIPTION("Hisilicon Hi655x regulator driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue