ARM: moxart: add MOXA ART SoC device tree files

Add a generic (dtsi) include file for MOXA ART SoCs.

Also add a file for UC-7112-LX.

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Jonas Jensen 2013-12-18 13:58:46 +01:00 committed by Olof Johansson
parent 31d95612cb
commit 448e7edefa
4 changed files with 276 additions and 0 deletions

View File

@ -0,0 +1,12 @@
MOXA ART device tree bindings
Boards with the MOXA ART SoC shall have the following properties:
Required root node property:
compatible = "moxa,moxart";
Boards:
- UC-7112-LX: embedded computer
compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"

View File

@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \

View File

@ -0,0 +1,109 @@
/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX
*
* Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
*
* Licensed under GPLv2 or later.
*/
/dts-v1/;
/include/ "moxart.dtsi"
/ {
model = "MOXA UC-7112-LX";
compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart";
memory {
device_type = "memory";
reg = <0x0 0x2000000>;
};
flash@80000000,0 {
compatible = "numonyx,js28f128", "cfi-flash";
reg = <0x80000000 0x1000000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "bootloader";
reg = <0x0 0x40000>;
};
partition@40000 {
label = "linux kernel";
reg = <0x40000 0x1C0000>;
};
partition@200000 {
label = "root filesystem";
reg = <0x200000 0x800000>;
};
partition@a00000 {
label = "user filesystem";
reg = <0xa00000 0x600000>;
};
};
leds {
compatible = "gpio-leds";
user-led {
label = "ready-led";
gpios = <&gpio 27 0x1>;
default-state = "on";
linux,default-trigger = "default-on";
};
};
gpio_keys_polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <500>;
button@25 {
label = "GPIO Reset";
linux,code = <116>;
gpios = <&gpio 25 1>;
};
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait";
};
};
&clk_pll {
clocks = <&ref12>;
};
&sdhci {
status = "okay";
};
&mdio0 {
status = "okay";
ethphy0: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mdio1 {
status = "okay";
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&mac0 {
status = "okay";
};
&mac1 {
status = "okay";
};
&uart0 {
status = "okay";
};

View File

@ -0,0 +1,154 @@
/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC
*
* Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
*
* Licensed under GPLv2 or later.
*/
/include/ "skeleton.dtsi"
/ {
compatible = "moxa,moxart";
model = "MOXART";
interrupt-parent = <&intc>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "faraday,fa526";
reg = <0>;
};
};
clocks {
#address-cells = <1>;
#size-cells = <0>;
ref12: ref12M {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12000000>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x90000000 0x10000000>;
ranges;
intc: interrupt-controller@98800000 {
compatible = "moxa,moxart-ic";
reg = <0x98800000 0x38>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-mask = <0x00080000>;
};
clk_pll: clk_pll@98100000 {
compatible = "moxa,moxart-pll-clock";
#clock-cells = <0>;
reg = <0x98100000 0x34>;
};
clk_apb: clk_apb@98100000 {
compatible = "moxa,moxart-apb-clock";
#clock-cells = <0>;
reg = <0x98100000 0x34>;
clocks = <&clk_pll>;
};
timer: timer@98400000 {
compatible = "moxa,moxart-timer";
reg = <0x98400000 0x42>;
interrupts = <19 1>;
clocks = <&clk_apb>;
};
gpio: gpio@98700000 {
gpio-controller;
#gpio-cells = <2>;
compatible = "moxa,moxart-gpio";
reg = <0x98700000 0xC>;
};
rtc: rtc {
compatible = "moxa,moxart-rtc";
gpio-rtc-sclk = <&gpio 5 0>;
gpio-rtc-data = <&gpio 6 0>;
gpio-rtc-reset = <&gpio 7 0>;
};
dma: dma@90500000 {
compatible = "moxa,moxart-dma";
reg = <0x90500080 0x40>;
interrupts = <24 0>;
#dma-cells = <1>;
};
watchdog: watchdog@98500000 {
compatible = "moxa,moxart-watchdog";
reg = <0x98500000 0x10>;
clocks = <&clk_apb>;
};
sdhci: sdhci@98e00000 {
compatible = "moxa,moxart-sdhci";
reg = <0x98e00000 0x5C>;
interrupts = <5 0>;
clocks = <&clk_apb>;
dmas = <&dma 5>,
<&dma 5>;
dma-names = "tx", "rx";
status = "disabled";
};
mdio0: mdio@90900090 {
compatible = "moxa,moxart-mdio";
reg = <0x90900090 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mdio1: mdio@92000090 {
compatible = "moxa,moxart-mdio";
reg = <0x92000090 0x8>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
mac0: mac@90900000 {
compatible = "moxa,moxart-mac";
reg = <0x90900000 0x90>;
interrupts = <25 0>;
phy-handle = <&ethphy0>;
phy-mode = "mii";
status = "disabled";
};
mac1: mac@92000000 {
compatible = "moxa,moxart-mac";
reg = <0x92000000 0x90>;
interrupts = <27 0>;
phy-handle = <&ethphy1>;
phy-mode = "mii";
status = "disabled";
};
uart0: uart@98200000 {
compatible = "ns16550a";
reg = <0x98200000 0x20>;
interrupts = <31 8>;
reg-shift = <2>;
reg-io-width = <4>;
clock-frequency = <14745600>;
status = "disabled";
};
};
};