From 41a5311465b9de6d18e78b733a2c6e1b33e89be8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 6 Jul 2007 02:39:54 -0700 Subject: [PATCH] PNP SMCf010 quirk: work around Toshiba Portege 4000 ACPI issues When we enable the SMCf010 IR device, the Toshiba Portege 4000 BIOS claims the device is working, but it really isn't configured correctly. The BIOS *will* configure it, but only if we call _SRS after (1) reversing the order of the SIR and FIR I/O port regions and (2) changing the IRQ from active-high to active-low. This patch addresses the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" I tested this on a Portege 4000. The smsc-ircc2 driver correctly detects the device, and "irattach irda0 -s && irdadump" shows transmitted and received packets. Signed-off-by: Bjorn Helgaas Cc: Andrey Borzenkov Cc: Samuel Ortiz Cc: "Linus Walleij (LD/EAB)" Cc: Michal Piotrowski Cc: Adam Belay Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pnp/quirks.c | 63 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 54 insertions(+), 9 deletions(-) diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index 967a8e22b2da..7c3236690cc3 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -136,11 +136,10 @@ static int quirk_smc_fir_enabled(struct pnp_dev *dev) static void quirk_smc_enable(struct pnp_dev *dev) { - /* - * If the BIOS left the device disabled, or it is enabled and - * responding correctly, we're in good shape. - */ - if (!dev->active || quirk_smc_fir_enabled(dev)) + struct resource fir, sir, irq; + + pnp_activate_dev(dev); + if (quirk_smc_fir_enabled(dev)) return; /* @@ -152,16 +151,62 @@ static void quirk_smc_enable(struct pnp_dev *dev) * this. Fortunately, they do fix things up if we auto-configure * the device using its _PRS and _SRS methods. */ - dev_err(&dev->dev, "%s device not responding, auto-configuring " - "resources\n", dev->id->id); + dev_err(&dev->dev, "%s not responding at SIR 0x%lx, FIR 0x%lx; " + "auto-configuring\n", dev->id->id, + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); pnp_disable_dev(dev); pnp_init_resource_table(&dev->res); pnp_auto_config_dev(dev); pnp_activate_dev(dev); + if (quirk_smc_fir_enabled(dev)) { + dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + return; + } - if (!quirk_smc_fir_enabled(dev)) - dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\"\n"); + /* + * The Toshiba Portege 4000 _CRS reports the FIR region first, + * followed by the SIR region. The BIOS will configure the bridge, + * but only if we call _SRS with SIR first, then FIR. It also + * reports the IRQ as active high, when it is really active low. + */ + dev_err(&dev->dev, "not responding at SIR 0x%lx, FIR 0x%lx; " + "swapping SIR/FIR and reconfiguring\n", + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + + /* + * Clear IORESOURCE_AUTO so pnp_activate_dev() doesn't reassign + * these resources any more. + */ + fir = dev->res.port_resource[0]; + sir = dev->res.port_resource[1]; + fir.flags &= ~IORESOURCE_AUTO; + sir.flags &= ~IORESOURCE_AUTO; + + irq = dev->res.irq_resource[0]; + irq.flags &= ~IORESOURCE_AUTO; + irq.flags &= ~IORESOURCE_BITS; + irq.flags |= IORESOURCE_IRQ_LOWEDGE; + + pnp_disable_dev(dev); + dev->res.port_resource[0] = sir; + dev->res.port_resource[1] = fir; + dev->res.irq_resource[0] = irq; + pnp_activate_dev(dev); + + if (quirk_smc_fir_enabled(dev)) { + dev_err(&dev->dev, "responds at SIR 0x%lx, FIR 0x%lx\n", + (unsigned long) pnp_port_start(dev, 0), + (unsigned long) pnp_port_start(dev, 1)); + return; + } + + dev_err(&dev->dev, "giving up; try \"smsc-ircc2.nopnp\" and " + "email bjorn.helgaas@hp.com\n"); }