[SCSI] 3ware 9000 add support for 9650SE

Updates the 3ware 9000 driver:

- Free irq handler in __twa_shutdown().
- Serialize reset code.
- Add support for 9650SE controllers.

Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
adam radford 2006-10-26 18:01:06 -07:00 committed by James Bottomley
parent 42961ee8fc
commit 4039c30ef5
2 changed files with 93 additions and 60 deletions

View File

@ -66,6 +66,9 @@
2.26.02.006 - Fix 9550SX pchip reset timeout.
Add big endian support.
2.26.02.007 - Disable local interrupts during kmap/unmap_atomic().
2.26.02.008 - Free irq handler in __twa_shutdown().
Serialize reset code.
Add support for 9650SE controllers.
*/
#include <linux/module.h>
@ -89,7 +92,7 @@
#include "3w-9xxx.h"
/* Globals */
#define TW_DRIVER_VERSION "2.26.02.007"
#define TW_DRIVER_VERSION "2.26.02.008"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@ -566,9 +569,9 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
goto out;
}
tw_dev->working_srl = fw_on_ctlr_srl;
tw_dev->working_branch = fw_on_ctlr_branch;
tw_dev->working_build = fw_on_ctlr_build;
tw_dev->tw_compat_info.working_srl = fw_on_ctlr_srl;
tw_dev->tw_compat_info.working_branch = fw_on_ctlr_branch;
tw_dev->tw_compat_info.working_build = fw_on_ctlr_build;
/* Try base mode compatibility */
if (!(init_connect_result & TW_CTLR_FW_COMPATIBLE)) {
@ -590,10 +593,23 @@ static int twa_check_srl(TW_Device_Extension *tw_dev, int *flashed)
}
goto out;
}
tw_dev->working_srl = TW_BASE_FW_SRL;
tw_dev->working_branch = TW_BASE_FW_BRANCH;
tw_dev->working_build = TW_BASE_FW_BUILD;
tw_dev->tw_compat_info.working_srl = TW_BASE_FW_SRL;
tw_dev->tw_compat_info.working_branch = TW_BASE_FW_BRANCH;
tw_dev->tw_compat_info.working_build = TW_BASE_FW_BUILD;
}
/* Load rest of compatibility struct */
strncpy(tw_dev->tw_compat_info.driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
tw_dev->tw_compat_info.driver_srl_high = TW_CURRENT_DRIVER_SRL;
tw_dev->tw_compat_info.driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
tw_dev->tw_compat_info.driver_build_high = TW_CURRENT_DRIVER_BUILD;
tw_dev->tw_compat_info.driver_srl_low = TW_BASE_FW_SRL;
tw_dev->tw_compat_info.driver_branch_low = TW_BASE_FW_BRANCH;
tw_dev->tw_compat_info.driver_build_low = TW_BASE_FW_BUILD;
tw_dev->tw_compat_info.fw_on_ctlr_srl = fw_on_ctlr_srl;
tw_dev->tw_compat_info.fw_on_ctlr_branch = fw_on_ctlr_branch;
tw_dev->tw_compat_info.fw_on_ctlr_build = fw_on_ctlr_build;
retval = 0;
out:
return retval;
@ -631,7 +647,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
goto out2;
/* Check data buffer size */
if (driver_command.buffer_length > TW_MAX_SECTORS * 512) {
if (driver_command.buffer_length > TW_MAX_SECTORS * 2048) {
retval = TW_IOCTL_ERROR_OS_EINVAL;
goto out2;
}
@ -680,13 +696,6 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
/* Now wait for command to complete */
timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
/* See if we reset while waiting for the ioctl to complete */
if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
clear_bit(TW_IN_RESET, &tw_dev->flags);
retval = TW_IOCTL_ERROR_OS_ERESTARTSYS;
goto out3;
}
/* We timed out, and didn't get an interrupt */
if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
/* Now we need to reset the board */
@ -694,11 +703,6 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
tw_dev->host->host_no, TW_DRIVER, 0xc,
cmd);
retval = TW_IOCTL_ERROR_OS_EIO;
spin_lock_irqsave(tw_dev->host->host_lock, flags);
tw_dev->state[request_id] = TW_S_COMPLETED;
twa_free_request_id(tw_dev, request_id);
tw_dev->posted_request_count--;
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
twa_reset_device_extension(tw_dev, 1);
goto out3;
}
@ -717,16 +721,7 @@ static int twa_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
tw_ioctl->driver_command.status = 0;
/* Copy compatiblity struct into ioctl data buffer */
tw_compat_info = (TW_Compatibility_Info *)tw_ioctl->data_buffer;
strncpy(tw_compat_info->driver_version, TW_DRIVER_VERSION, strlen(TW_DRIVER_VERSION));
tw_compat_info->working_srl = tw_dev->working_srl;
tw_compat_info->working_branch = tw_dev->working_branch;
tw_compat_info->working_build = tw_dev->working_build;
tw_compat_info->driver_srl_high = TW_CURRENT_DRIVER_SRL;
tw_compat_info->driver_branch_high = TW_CURRENT_DRIVER_BRANCH;
tw_compat_info->driver_build_high = TW_CURRENT_DRIVER_BUILD;
tw_compat_info->driver_srl_low = TW_BASE_FW_SRL;
tw_compat_info->driver_branch_low = TW_BASE_FW_BRANCH;
tw_compat_info->driver_build_low = TW_BASE_FW_BUILD;
memcpy(tw_compat_info, &tw_dev->tw_compat_info, sizeof(TW_Compatibility_Info));
break;
case TW_IOCTL_GET_LAST_EVENT:
if (tw_dev->event_queue_wrapped) {
@ -895,7 +890,8 @@ static int twa_decode_bits(TW_Device_Extension *tw_dev, u32 status_reg_value)
}
if (status_reg_value & TW_STATUS_QUEUE_ERROR) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
if ((tw_dev->tw_pci_dev->device != PCI_DEVICE_ID_3WARE_9650SE) || (!test_bit(TW_IN_RESET, &tw_dev->flags)))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0xe, "Controller Queue Error: clearing");
writel(TW_CONTROL_CLEAR_QUEUE_ERROR, TW_CONTROL_REG_ADDR(tw_dev));
}
@ -939,10 +935,12 @@ static int twa_empty_response_queue_large(TW_Device_Extension *tw_dev)
unsigned long before;
int retval = 1;
if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) {
if ((tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9550SX) ||
(tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE)) {
before = jiffies;
while ((response_que_value & TW_9550SX_DRAIN_COMPLETED) != TW_9550SX_DRAIN_COMPLETED) {
response_que_value = readl(TW_RESPONSE_QUEUE_REG_ADDR_LARGE(tw_dev));
msleep(1);
if (time_after(jiffies, before + HZ * 30))
goto out;
}
@ -1214,6 +1212,10 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance)
handled = 1;
/* If we are resetting, bail */
if (test_bit(TW_IN_RESET, &tw_dev->flags))
goto twa_interrupt_bail;
/* Check controller for errors */
if (twa_check_bits(status_reg_value)) {
if (twa_decode_bits(tw_dev, status_reg_value)) {
@ -1355,8 +1357,8 @@ static void twa_load_sgl(TW_Command_Full *full_command_packet, int request_id, d
if (TW_OP_OUT(full_command_packet->command.newcommand.opcode__reserved) == TW_OP_EXECUTE_SCSI) {
newcommand = &full_command_packet->command.newcommand;
newcommand->request_id__lunl =
TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id);
newcommand->request_id__lunl =
cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand->request_id__lunl), request_id));
newcommand->sg_list[0].address = TW_CPU_TO_SGL(dma_handle + sizeof(TW_Ioctl_Buf_Apache) - 1);
newcommand->sg_list[0].length = cpu_to_le32(length);
newcommand->sgl_entries__lunh =
@ -1531,6 +1533,13 @@ static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id,
int retval = 1;
command_que_value = tw_dev->command_packet_phys[request_id];
/* For 9650SE write low 4 bytes first */
if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev));
}
status_reg_value = readl(TW_STATUS_REG_ADDR(tw_dev));
if (twa_check_bits(status_reg_value))
@ -1557,13 +1566,17 @@ static int twa_post_command_packet(TW_Device_Extension *tw_dev, int request_id,
TW_UNMASK_COMMAND_INTERRUPT(tw_dev);
goto out;
} else {
/* We successfully posted the command packet */
if (sizeof(dma_addr_t) > 4) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
if (tw_dev->tw_pci_dev->device == PCI_DEVICE_ID_3WARE_9650SE) {
/* Now write upper 4 bytes */
writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR_LARGE(tw_dev) + 0x4);
} else {
writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
if (sizeof(dma_addr_t) > 4) {
command_que_value += TW_COMMAND_OFFSET;
writel((u32)command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
writel((u32)((u64)command_que_value >> 32), TW_COMMAND_QUEUE_REG_ADDR(tw_dev) + 0x4);
} else {
writel(TW_COMMAND_OFFSET + command_que_value, TW_COMMAND_QUEUE_REG_ADDR(tw_dev));
}
}
tw_dev->state[request_id] = TW_S_POSTED;
tw_dev->posted_request_count++;
@ -1620,14 +1633,9 @@ static int twa_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_res
goto out;
TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
clear_bit(TW_IN_RESET, &tw_dev->flags);
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
/* Wake up any ioctl that was pending before the reset */
if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
clear_bit(TW_IN_RESET, &tw_dev->flags);
} else {
tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
wake_up(&tw_dev->ioctl_wqueue);
}
retval = 0;
out:
return retval;
@ -1736,6 +1744,9 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
"WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
TW_DRIVER, 0x2c, SCpnt->cmnd[0]);
/* Make sure we are not issuing an ioctl or resetting from ioctl */
mutex_lock(&tw_dev->ioctl_lock);
/* Now reset the card and some of the device extension data */
if (twa_reset_device_extension(tw_dev, 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x2b, "Controller reset failed during scsi host reset");
@ -1744,6 +1755,7 @@ static int twa_scsi_eh_reset(struct scsi_cmnd *SCpnt)
retval = SUCCESS;
out:
mutex_unlock(&tw_dev->ioctl_lock);
return retval;
} /* End twa_scsi_eh_reset() */
@ -1753,8 +1765,14 @@ static int twa_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd
int request_id, retval;
TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
/* If we are resetting due to timed out ioctl, report as busy */
if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
retval = SCSI_MLQUEUE_HOST_BUSY;
goto out;
}
/* Check if this FW supports luns */
if ((SCpnt->device->lun != 0) && (tw_dev->working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
if ((SCpnt->device->lun != 0) && (tw_dev->tw_compat_info.working_srl < TW_FW_SRL_LUNS_SUPPORTED)) {
SCpnt->result = (DID_BAD_TARGET << 16);
done(SCpnt);
retval = 0;
@ -1960,6 +1978,9 @@ static void __twa_shutdown(TW_Device_Extension *tw_dev)
/* Disable interrupts */
TW_DISABLE_INTERRUPTS(tw_dev);
/* Free up the IRQ */
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no);
/* Tell the card we are shutting down */
@ -2091,21 +2112,25 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
/* Initialize the card */
if (twa_reset_sequence(tw_dev, 0))
goto out_release_mem_region;
goto out_iounmap;
/* Set host specific parameters */
host->max_id = TW_MAX_UNITS;
if (pdev->device == PCI_DEVICE_ID_3WARE_9650SE)
host->max_id = TW_MAX_UNITS_9650SE;
else
host->max_id = TW_MAX_UNITS;
host->max_cmd_len = TW_MAX_CDB_LEN;
/* Channels aren't supported by adapter */
host->max_lun = TW_MAX_LUNS(tw_dev->working_srl);
host->max_lun = TW_MAX_LUNS(tw_dev->tw_compat_info.working_srl);
host->max_channel = 0;
/* Register the card with the kernel SCSI layer */
retval = scsi_add_host(host, &pdev->dev);
if (retval) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x27, "scsi add host failed");
goto out_release_mem_region;
goto out_iounmap;
}
pci_set_drvdata(pdev, host);
@ -2145,6 +2170,8 @@ static int __devinit twa_probe(struct pci_dev *pdev, const struct pci_device_id
out_remove_host:
scsi_remove_host(host);
out_iounmap:
iounmap(tw_dev->base_addr);
out_release_mem_region:
pci_release_regions(pdev);
out_free_device_extension:
@ -2170,12 +2197,12 @@ static void twa_remove(struct pci_dev *pdev)
twa_major = -1;
}
/* Free up the IRQ */
free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
/* Shutdown the card */
__twa_shutdown(tw_dev);
/* Free IO remapping */
iounmap(tw_dev->base_addr);
/* Free up the mem region */
pci_release_regions(pdev);
@ -2193,6 +2220,8 @@ static struct pci_device_id twa_pci_tbl[] __devinitdata = {
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9550SX,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_3WARE, PCI_DEVICE_ID_3WARE_9650SE,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ }
};
MODULE_DEVICE_TABLE(pci, twa_pci_tbl);

View File

@ -289,7 +289,6 @@ static twa_message_type twa_error_table[] = {
#define TW_STATUS_VALID_INTERRUPT 0x00DF0000
/* PCI related defines */
#define TW_NUMDEVICES 1
#define TW_PCI_CLEAR_PARITY_ERRORS 0xc100
#define TW_PCI_CLEAR_PCI_ABORT 0x2000
@ -335,6 +334,7 @@ static twa_message_type twa_error_table[] = {
#define TW_ALIGNMENT_9000 4 /* 4 bytes */
#define TW_ALIGNMENT_9000_SGL 0x3
#define TW_MAX_UNITS 16
#define TW_MAX_UNITS_9650SE 32
#define TW_INIT_MESSAGE_CREDITS 0x100
#define TW_INIT_COMMAND_PACKET_SIZE 0x3
#define TW_INIT_COMMAND_PACKET_SIZE_EXTENDED 0x6
@ -354,7 +354,6 @@ static twa_message_type twa_error_table[] = {
#define TW_MAX_RESPONSE_DRAIN 256
#define TW_MAX_AEN_DRAIN 40
#define TW_IN_RESET 2
#define TW_IN_CHRDEV_IOCTL 3
#define TW_IN_ATTENTION_LOOP 4
#define TW_MAX_SECTORS 256
#define TW_AEN_WAIT_TIME 1000
@ -417,6 +416,9 @@ static twa_message_type twa_error_table[] = {
#ifndef PCI_DEVICE_ID_3WARE_9550SX
#define PCI_DEVICE_ID_3WARE_9550SX 0x1003
#endif
#ifndef PCI_DEVICE_ID_3WARE_9650SE
#define PCI_DEVICE_ID_3WARE_9650SE 0x1004
#endif
/* Bitmask macros to eliminate bitfields */
@ -442,6 +444,7 @@ static twa_message_type twa_error_table[] = {
#define TW_CONTROL_REG_ADDR(x) (x->base_addr)
#define TW_STATUS_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0x4)
#define TW_COMMAND_QUEUE_REG_ADDR(x) (sizeof(dma_addr_t) > 4 ? ((unsigned char __iomem *)x->base_addr + 0x20) : ((unsigned char __iomem *)x->base_addr + 0x8))
#define TW_COMMAND_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x20)
#define TW_RESPONSE_QUEUE_REG_ADDR(x) ((unsigned char __iomem *)x->base_addr + 0xC)
#define TW_RESPONSE_QUEUE_REG_ADDR_LARGE(x) ((unsigned char __iomem *)x->base_addr + 0x30)
#define TW_CLEAR_ALL_INTERRUPTS(x) (writel(TW_STATUS_VALID_INTERRUPT, TW_CONTROL_REG_ADDR(x)))
@ -626,6 +629,9 @@ typedef struct TAG_TW_Compatibility_Info
unsigned short driver_srl_low;
unsigned short driver_branch_low;
unsigned short driver_build_low;
unsigned short fw_on_ctlr_srl;
unsigned short fw_on_ctlr_branch;
unsigned short fw_on_ctlr_build;
} TW_Compatibility_Info;
#pragma pack()
@ -668,9 +674,7 @@ typedef struct TAG_TW_Device_Extension {
wait_queue_head_t ioctl_wqueue;
struct mutex ioctl_lock;
char aen_clobber;
unsigned short working_srl;
unsigned short working_branch;
unsigned short working_build;
TW_Compatibility_Info tw_compat_info;
} TW_Device_Extension;
#endif /* _3W_9XXX_H */