From 401fb66a355eb0f22096cf26864324f8e63c7d78 Mon Sep 17 00:00:00 2001 From: Indan Zupancic Date: Thu, 5 May 2022 13:47:50 +0200 Subject: [PATCH] fsl_lpuart: Don't enable interrupts too early If an irq is pending when devm_request_irq() is called, the irq handler will cause a NULL pointer access because initialisation is not done yet. Fixes: 9d7ee0e28da59 ("tty: serial: lpuart: avoid report NULL interrupt") Cc: stable Signed-off-by: Indan Zupancic Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/fsl_lpuart.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 87789872f400..be12fee94db5 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -2664,6 +2664,7 @@ static int lpuart_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct lpuart_port *sport; struct resource *res; + irq_handler_t handler; int ret; sport = devm_kzalloc(&pdev->dev, sizeof(*sport), GFP_KERNEL); @@ -2741,17 +2742,11 @@ static int lpuart_probe(struct platform_device *pdev) if (lpuart_is_32(sport)) { lpuart_reg.cons = LPUART32_CONSOLE; - ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart32_int, 0, - DRIVER_NAME, sport); + handler = lpuart32_int; } else { lpuart_reg.cons = LPUART_CONSOLE; - ret = devm_request_irq(&pdev->dev, sport->port.irq, lpuart_int, 0, - DRIVER_NAME, sport); + handler = lpuart_int; } - - if (ret) - goto failed_irq_request; - ret = uart_add_one_port(&lpuart_reg, &sport->port); if (ret) goto failed_attach_port; @@ -2773,13 +2768,18 @@ static int lpuart_probe(struct platform_device *pdev) sport->port.rs485_config(&sport->port, &sport->port.rs485); + ret = devm_request_irq(&pdev->dev, sport->port.irq, handler, 0, + DRIVER_NAME, sport); + if (ret) + goto failed_irq_request; + return 0; +failed_irq_request: failed_get_rs485: failed_reset: uart_remove_one_port(&lpuart_reg, &sport->port); failed_attach_port: -failed_irq_request: lpuart_disable_clks(sport); failed_clock_enable: failed_out_of_range: