- New Drivers

- Add support for USART SPI to AT91*
 
  - New Functionality
    - Add support for Audio CODECs to motorola-cpcap
 
  - Fix-ups
    - DT documentation fix-ups; atmel-usart
    - Staticise functions/structs; spi-at91-usart, arizona-core
    - Constify; ti-lmu
    - Fix memory leaks; menelaus
    - Change device 'wake-up' status; ti_am335x_tscadc, max8997
    - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997
    - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers),
    - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_*
    - Build as module; sec-irq
    - Use new %pOFn printk format for device_node.name; max77620
    - Remove unused code; madera
    - Use generic MACROs; intel_msic, intel_soc_pmic_crc
    - Move to GPIOD; ti-lmu
    - Use managed resources; ti-lmu
 
  - Bug Fixes
    - Add missing headers; at91-usart
    - Prevent device from entering low-power mode; arizona-core
    - Poll for BOOT_DONE to avoid still-booting NACK; madera-core
    - Prevent ADC read from shutting down device; mc13xxx-core
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAlvO94AACgkQUa+KL4f8
 d2GCaQ//XKJZ14EVT8gHVWekwUCJoqqLDDZH5Y+MDZkyq8ZnWZ3Iz2DeQ/g7KIAv
 EwtmWm4+TmfBMHziZSK3lZc/VBdhOWsFqi7/B1vQQ3n7RWHvhRcvFWASSzqCPpQP
 L7WbUtZWaeHx/26OKz1okbQbMuHEv11z8seXEX6axtSXlCbAF72fUaHDTAY0dCHD
 LAkomYee6wF3ohSwaPEH5FsgGRJ5ihnFmK8uGML+vBMq9IfrFOmOitrJmpOwPHud
 wKSEsKmVALeX/fP0kqcvaYOWTpNQecKEnJXH4uw0CC3QOIpL5nMmfKOjMfMF6wAq
 m76s5ZBt0UUMDZSiex+mzYQyfEXaP6bExtiUIfkXOii9uuaIIJ2J8rRLzoUrwpLy
 qTuGiIoUr3aoUFNx1uzmzeYVNLcQ2JeIrRw+MKlP60RiYDYyk8Ip96/ay+vLZXOl
 WTGFr9T5CnfjaHkoSgVcBu+F5q0v6qbvv0tBpjgYaRe9OClEEFqCSHqLo0oYwyeQ
 L4Y+tmGaDtUeRFdRyLp45X0y/DiThVkkDdOfRi3Fxn3PW4OxMOsU/GLCMQrbGXOr
 q5pJuSFjimu+JDZ2ibmMOtWrgtJ2EjTiBYLcDZNP2sujSWFE8azoEqGMXcQFDw/a
 Ltc6b474UNp9SGB4IC97f/B6EFUJ/TQWjo4WJXVEHdCRilRWBgM=
 =7B+Y
 -----END PGP SIGNATURE-----

Merge tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers
   - Add support for USART SPI to AT91*

  New Functionality
   - Add support for Audio CODECs to motorola-cpcap

  Fix-ups
   - DT documentation fix-ups; atmel-usart
   - Staticise functions/structs; spi-at91-usart, arizona-core
   - Constify; ti-lmu
   - Fix memory leaks; menelaus
   - Change device 'wake-up' status; ti_am335x_tscadc, max8997
   - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997
   - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers),
   - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_*
   - Build as module; sec-irq
   - Use new %pOFn printk format for device_node.name; max77620
   - Remove unused code; madera
   - Use generic MACROs; intel_msic, intel_soc_pmic_crc
   - Move to GPIOD; ti-lmu
   - Use managed resources; ti-lmu

  Bug Fixes
   - Add missing headers; at91-usart
   - Prevent device from entering low-power mode; arizona-core
   - Poll for BOOT_DONE to avoid still-booting NACK; madera-core
   - Prevent ADC read from shutting down device; mc13xxx-core"

* tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits)
  mfd: cros_ec: Avoid unneeded internal declaration warning
  mfd: ti-lmu: Use of_device_get_match_data() helper
  mfd: ti-lmu: Use managed resource for everything
  mfd: ti-lmu: Switch to GPIOD
  mfd: ti-lmu: constify mfd_cell tables
  mfd: max8997: Disable interrupt handling for suspend/resume cycle
  mfd: max8997: Enale irq-wakeup unconditionally
  mfd: arizona: Make array mclk_name static, shrinks object size
  MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC
  mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier.
  mfd: Sort headers alphabetically for Intel PMIC drivers
  mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well
  mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro
  mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro
  mfd: intel_msic: Use DEFINE_RES_IRQ() macro
  mfd: motorola-cpcap: Add audio-codec support
  mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values
  mfd: madera: Remove unused forward reference
  mfd: max77620: Convert to using %pOFn instead of device_node.name
  mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE
  ...

Documentation/devicetree/bindings/mfd/atmel-usart.txt

@@ -1,6 +1,6 @@
 * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
 
-Required properties:
+Required properties for USART:
 - compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
   The compatible <chip> indicated will be the first SoC to support an
   additional mode or an USART new feature.
@@ -11,7 +11,13 @@ Required properties:
 	Required elements: "usart"
 - clocks: phandles to input clocks.
 
-Optional properties:
+Required properties for USART in SPI mode:
+- #size-cells      : Must be <0>
+- #address-cells   : Must be <1>
+- cs-gpios: chipselects (internal cs not supported)
+- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h)
+
+Optional properties in serial mode:
 - atmel,use-dma-rx: use of PDC or DMA for receiving data
 - atmel,use-dma-tx: use of PDC or DMA for transmitting data
 - {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively.
@@ -62,3 +68,18 @@ Example:
 		dma-names = "tx", "rx";
 		atmel,fifo-size = <32>;
 	};
+
+- SPI mode:
+	#include <dt-bindings/mfd/at91-usart.h>
+
+	spi0: spi@f001c000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart";
+		atmel,usart-mode = <AT91_USART_MODE_SPI>;
+		reg = <0xf001c000 0x100>;
+		interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+		clocks = <&usart0_clk>;
+		clock-names = "usart";
+		cs-gpios = <&pioB 3 0>;
+	};

MAINTAINERS

@@ -7546,6 +7546,14 @@ F:	drivers/platform/x86/intel_punit_ipc.c
 F:	arch/x86/include/asm/intel_pmc_ipc.h
 F:	arch/x86/include/asm/intel_punit_ipc.h
 
+INTEL MULTIFUNCTION PMIC DEVICE DRIVERS
+R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+S:	Maintained
+F:	drivers/mfd/intel_msic.c
+F:	drivers/mfd/intel_soc_pmic*
+F:	include/linux/mfd/intel_msic.h
+F:	include/linux/mfd/intel_soc_pmic*
+
 INTEL PRO/WIRELESS 2100, 2200BG, 2915ABG NETWORK CONNECTION SUPPORT
 M:	Stanislav Yakovlev <stas.yakovlev@gmail.com>
 L:	linux-wireless@vger.kernel.org
@@ -9589,6 +9597,7 @@ M:	Richard Genoud <richard.genoud@gmail.com>
 S:	Maintained
 F:	drivers/tty/serial/atmel_serial.c
 F:	drivers/tty/serial/atmel_serial.h
+F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
 
 MICROCHIP / ATMEL DMA DRIVER
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
@@ -9620,6 +9629,21 @@ S:	Supported
 F:	drivers/mtd/nand/raw/atmel/*
 F:	Documentation/devicetree/bindings/mtd/atmel-nand.txt
 
+MICROCHIP AT91 USART MFD DRIVER
+M:	Radu Pirea <radu_nicolae.pirea@upb.ro>
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	drivers/mfd/at91-usart.c
+F:	include/dt-bindings/mfd/at91-usart.h
+F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
+
+MICROCHIP AT91 USART SPI DRIVER
+M:	Radu Pirea <radu_nicolae.pirea@upb.ro>
+L:	linux-spi@vger.kernel.org
+S:	Supported
+F:	drivers/spi/spi-at91-usart.c
+F:	Documentation/devicetree/bindings/mfd/atmel-usart.txt
+
 MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER
 M:	Woojung Huh <Woojung.Huh@microchip.com>
 M:	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>

drivers/iio/adc/ti_am335x_adc.c

@@ -693,16 +693,12 @@ static int __maybe_unused tiadc_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 	struct tiadc_device *adc_dev = iio_priv(indio_dev);
-	struct ti_tscadc_dev *tscadc_dev;
 	unsigned int idle;
 
-	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
+	idle = tiadc_readl(adc_dev, REG_CTRL);
-	if (!device_may_wakeup(tscadc_dev->dev)) {
+	idle &= ~(CNTRLREG_TSCSSENB);
-		idle = tiadc_readl(adc_dev, REG_CTRL);
+	tiadc_writel(adc_dev, REG_CTRL, (idle |
-		idle &= ~(CNTRLREG_TSCSSENB);
+			CNTRLREG_POWERDOWN));
-		tiadc_writel(adc_dev, REG_CTRL, (idle |
-				CNTRLREG_POWERDOWN));
-	}
 
 	return 0;
 }

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -27,6 +27,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/sort.h>
+#include <linux/pm_wakeirq.h>
 
 #include <linux/mfd/ti_am335x_tscadc.h>
 
@@ -46,6 +47,7 @@ static const int config_pins[] = {
 struct titsc {
 	struct input_dev	*input;
 	struct ti_tscadc_dev	*mfd_tscadc;
+	struct device		*dev;
 	unsigned int		irq;
 	unsigned int		wires;
 	unsigned int		x_plate_resistance;
@@ -276,7 +278,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 	if (status & IRQENB_HW_PEN) {
 		ts_dev->pen_down = true;
 		irqclr |= IRQENB_HW_PEN;
-		pm_stay_awake(ts_dev->mfd_tscadc->dev);
+		pm_stay_awake(ts_dev->dev);
 	}
 
 	if (status & IRQENB_PENUP) {
@@ -286,7 +288,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 			input_report_key(input_dev, BTN_TOUCH, 0);
 			input_report_abs(input_dev, ABS_PRESSURE, 0);
 			input_sync(input_dev);
-			pm_relax(ts_dev->mfd_tscadc->dev);
+			pm_relax(ts_dev->dev);
 		} else {
 			ts_dev->pen_down = true;
 		}
@@ -422,6 +424,7 @@ static int titsc_probe(struct platform_device *pdev)
 	ts_dev->mfd_tscadc = tscadc_dev;
 	ts_dev->input = input_dev;
 	ts_dev->irq = tscadc_dev->irq;
+	ts_dev->dev = &pdev->dev;
 
 	err = titsc_parse_dt(pdev, ts_dev);
 	if (err) {
@@ -436,6 +439,11 @@ static int titsc_probe(struct platform_device *pdev)
 		goto err_free_mem;
 	}
 
+	device_init_wakeup(&pdev->dev, true);
+	err = dev_pm_set_wake_irq(&pdev->dev, ts_dev->irq);
+	if (err)
+		dev_err(&pdev->dev, "irq wake enable failed.\n");
+
 	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
@@ -467,6 +475,8 @@ static int titsc_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_irq:
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 	free_irq(ts_dev->irq, ts_dev);
 err_free_mem:
 	input_free_device(input_dev);
@@ -479,6 +489,8 @@ static int titsc_remove(struct platform_device *pdev)
 	struct titsc *ts_dev = platform_get_drvdata(pdev);
 	u32 steps;
 
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 	free_irq(ts_dev->irq, ts_dev);
 
 	/* total steps followed by the enable mask */
@@ -499,7 +511,7 @@ static int __maybe_unused titsc_suspend(struct device *dev)
 	unsigned int idle;
 
 	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
-	if (device_may_wakeup(tscadc_dev->dev)) {
+	if (device_may_wakeup(dev)) {
 		titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 		idle = titsc_readl(ts_dev, REG_IRQENABLE);
 		titsc_writel(ts_dev, REG_IRQENABLE,
@@ -515,11 +527,11 @@ static int __maybe_unused titsc_resume(struct device *dev)
 	struct ti_tscadc_dev *tscadc_dev;
 
 	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
-	if (device_may_wakeup(tscadc_dev->dev)) {
+	if (device_may_wakeup(dev)) {
 		titsc_writel(ts_dev, REG_IRQWAKEUP,
 				0x00);
 		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
-		pm_relax(ts_dev->mfd_tscadc->dev);
+		pm_relax(dev);
 	}
 	titsc_step_config(ts_dev);
 	titsc_writel(ts_dev, REG_FIFO0THR,

drivers/mfd/Kconfig

@@ -99,6 +99,15 @@ config MFD_AAT2870_CORE
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_AT91_USART
+	tristate "AT91 USART Driver"
+	select MFD_CORE
+	help
+	  Select this to get support for AT91 USART IP. This is a wrapper
+	  over at91-usart-serial driver and usart-spi-driver. Only one function
+	  can be used at a time. The choice is done at boot time by the probe
+	  function of this MFD driver according to a device tree property.
+
 config MFD_ATMEL_FLEXCOM
 	tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
 	select MFD_CORE
@@ -1023,16 +1032,23 @@ config MFD_RN5T618
 	  functionality of the device.
 
 config MFD_SEC_CORE
-	bool "SAMSUNG Electronics PMIC Series Support"
+	tristate "SAMSUNG Electronics PMIC Series Support"
 	depends on I2C=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
 	help
-	 Support for the Samsung Electronics MFD series.
+	  Support for the Samsung Electronics PMIC devices coming
-	 This driver provides common support for accessing the device,
+	  usually along with Samsung Exynos SoC chipset.
-	 additional drivers must be enabled in order to use the functionality
+	  This driver provides common support for accessing the device,
-	 of the device
+	  additional drivers must be enabled in order to use the functionality
+	  of the device
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sec-core.
+	  Have in mind that important core drivers (like regulators) depend
+	  on this driver so building this as a module might require proper
+	  initial ramdisk or might not boot up as well in certain scenarios.
 
 config MFD_SI476X_CORE
 	tristate "Silicon Laboratories 4761/64/68 AM/FM radio."

drivers/mfd/Makefile

@@ -196,6 +196,7 @@ obj-$(CONFIG_MFD_SPMI_PMIC)	+= qcom-spmi-pmic.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_TPS65090)	+= tps65090.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
+obj-$(CONFIG_MFD_AT91_USART)	+= at91-usart.o
 obj-$(CONFIG_MFD_ATMEL_FLEXCOM)	+= atmel-flexcom.o
 obj-$(CONFIG_MFD_ATMEL_HLCDC)	+= atmel-hlcdc.o
 obj-$(CONFIG_MFD_ATMEL_SMC)	+= atmel-smc.o

drivers/mfd/adp5520.c

@@ -360,6 +360,6 @@ static struct i2c_driver adp5520_driver = {
 
 module_i2c_driver(adp5520_driver);
 
-MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
 MODULE_DESCRIPTION("ADP5520(01) PMIC-MFD Driver");
 MODULE_LICENSE("GPL");

drivers/mfd/arizona-core.c

@@ -52,8 +52,10 @@ int arizona_clk32k_enable(struct arizona *arizona)
 			if (ret != 0)
 				goto err_ref;
 			ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK1]);
-			if (ret != 0)
+			if (ret != 0) {
-				goto err_pm;
+				pm_runtime_put_sync(arizona->dev);
+				goto err_ref;
+			}
 			break;
 		case ARIZONA_32KZ_MCLK2:
 			ret = clk_prepare_enable(arizona->mclk[ARIZONA_MCLK2]);
@@ -67,8 +69,6 @@ int arizona_clk32k_enable(struct arizona *arizona)
 					 ARIZONA_CLK_32K_ENA);
 	}
 
-err_pm:
-	pm_runtime_put_sync(arizona->dev);
 err_ref:
 	if (ret != 0)
 		arizona->clk32k_ref--;
@@ -990,7 +990,7 @@ static const struct mfd_cell wm8998_devs[] = {
 
 int arizona_dev_init(struct arizona *arizona)
 {
-	const char * const mclk_name[] = { "mclk1", "mclk2" };
+	static const char * const mclk_name[] = { "mclk1", "mclk2" };
 	struct device *dev = arizona->dev;
 	const char *type_name = NULL;
 	unsigned int reg, val;

drivers/mfd/at91-usart.c

@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for AT91 USART
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <radu.pirea@microchip.com>
+ *
+ */
+
+#include <dt-bindings/mfd/at91-usart.h>
+
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/property.h>
+
+static struct mfd_cell at91_usart_spi_subdev = {
+		.name = "at91_usart_spi",
+		.of_compatible = "microchip,at91sam9g45-usart-spi",
+	};
+
+static struct mfd_cell at91_usart_serial_subdev = {
+		.name = "atmel_usart_serial",
+		.of_compatible = "atmel,at91rm9200-usart-serial",
+	};
+
+static int at91_usart_mode_probe(struct platform_device *pdev)
+{
+	struct mfd_cell cell;
+	u32 opmode = AT91_USART_MODE_SERIAL;
+
+	device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode);
+
+	switch (opmode) {
+	case AT91_USART_MODE_SPI:
+		cell = at91_usart_spi_subdev;
+		break;
+	case AT91_USART_MODE_SERIAL:
+		cell = at91_usart_serial_subdev;
+		break;
+	default:
+		dev_err(&pdev->dev, "atmel,usart-mode has an invalid value %u\n",
+			opmode);
+		return -EINVAL;
+	}
+
+	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,
+			      NULL, 0, NULL);
+}
+
+static const struct of_device_id at91_usart_mode_of_match[] = {
+	{ .compatible = "atmel,at91rm9200-usart" },
+	{ .compatible = "atmel,at91sam9260-usart" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, at91_usart_mode_of_match);
+
+static struct platform_driver at91_usart_mfd = {
+	.probe	= at91_usart_mode_probe,
+	.driver	= {
+		.name		= "at91_usart_mode",
+		.of_match_table	= at91_usart_mode_of_match,
+	},
+};
+
+module_platform_driver(at91_usart_mfd);
+
+MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
+MODULE_DESCRIPTION("AT91 USART MFD driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/cros_ec.c

@@ -218,7 +218,8 @@ EXPORT_SYMBOL(cros_ec_suspend);
 
 static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
 {
-	while (cros_ec_get_next_event(ec_dev, NULL) > 0)
+	while (ec_dev->mkbp_event_supported &&
+	       cros_ec_get_next_event(ec_dev, NULL) > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
 					     1, ec_dev);
 }

drivers/mfd/cros_ec_dev.c

@@ -546,6 +546,7 @@ static struct platform_driver cros_ec_dev_driver = {
 		.name = DRV_NAME,
 		.pm = &cros_ec_dev_pm_ops,
 	},
+	.id_table = cros_ec_id,
 	.probe = ec_device_probe,
 	.remove = ec_device_remove,
 	.shutdown = ec_device_shutdown,

drivers/mfd/intel_msic.c

@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Intel MSIC
  *
  * Copyright (C) 2011, Intel Corporation
  * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/err.h>
@@ -54,68 +51,44 @@ struct intel_msic {
 };
 
 static struct resource msic_touch_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_adc_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_battery_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_gpio_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_audio_resources[] = {
-	{
+	DEFINE_RES_IRQ_NAMED(0, "IRQ"),
-		.name		= "IRQ",
-		.flags		= IORESOURCE_IRQ,
-	},
 	/*
 	 * We will pass IRQ_BASE to the driver now but this can be removed
 	 * when/if the driver starts to use intel_msic_irq_read().
 	 */
-	{
+	DEFINE_RES_MEM_NAMED(MSIC_IRQ_STATUS_ACCDET, 1, "IRQ_BASE"),
-		.name		= "IRQ_BASE",
-		.flags		= IORESOURCE_MEM,
-		.start		= MSIC_IRQ_STATUS_ACCDET,
-		.end		= MSIC_IRQ_STATUS_ACCDET,
-	},
 };
 
 static struct resource msic_hdmi_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_thermal_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_power_btn_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource msic_ocd_resources[] = {
-	{
+	DEFINE_RES_IRQ(0),
-		.flags		= IORESOURCE_IRQ,
-	},
 };
 
 /*

drivers/mfd/intel_soc_pmic_bxtwc.c

@@ -1,27 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MFD core driver for Intel Broxton Whiskey Cove PMIC
  *
  * Copyright (C) 2015 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
  */
 
-#include <linux/module.h>
 #include <linux/acpi.h>
-#include <linux/err.h>
 #include <linux/delay.h>
+#include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/intel_soc_pmic.h>
 #include <linux/mfd/intel_soc_pmic_bxtwc.h>
+#include <linux/module.h>
+
 #include <asm/intel_pmc_ipc.h>
 
 /* PMIC device registers */
@@ -31,8 +24,8 @@
 
 /* Interrupt Status Registers */
 #define BXTWC_IRQLVL1		0x4E02
-#define BXTWC_PWRBTNIRQ		0x4E03
 
+#define BXTWC_PWRBTNIRQ		0x4E03
 #define BXTWC_THRM0IRQ		0x4E04
 #define BXTWC_THRM1IRQ		0x4E05
 #define BXTWC_THRM2IRQ		0x4E06
@@ -47,10 +40,9 @@
 
 /* Interrupt MASK Registers */
 #define BXTWC_MIRQLVL1		0x4E0E
-#define BXTWC_MPWRTNIRQ		0x4E0F
-
 #define BXTWC_MIRQLVL1_MCHGR	BIT(5)
 
+#define BXTWC_MPWRBTNIRQ	0x4E0F
 #define BXTWC_MTHRM0IRQ		0x4E12
 #define BXTWC_MTHRM1IRQ		0x4E13
 #define BXTWC_MTHRM2IRQ		0x4E14
@@ -66,9 +58,7 @@
 /* Whiskey Cove PMIC share same ACPI ID between different platforms */
 #define BROXTON_PMIC_WC_HRV	4
 
-/* Manage in two IRQ chips since mask registers are not consecutive */
 enum bxtwc_irqs {
-	/* Level 1 */
 	BXTWC_PWRBTN_LVL1_IRQ = 0,
 	BXTWC_TMU_LVL1_IRQ,
 	BXTWC_THRM_LVL1_IRQ,
@@ -77,9 +67,11 @@ enum bxtwc_irqs {
 	BXTWC_CHGR_LVL1_IRQ,
 	BXTWC_GPIO_LVL1_IRQ,
 	BXTWC_CRIT_LVL1_IRQ,
+};
 
-	/* Level 2 */
+enum bxtwc_irqs_pwrbtn {
-	BXTWC_PWRBTN_IRQ,
+	BXTWC_PWRBTN_IRQ = 0,
+	BXTWC_UIBTN_IRQ,
 };
 
 enum bxtwc_irqs_bcu {
@@ -113,7 +105,10 @@ static const struct regmap_irq bxtwc_regmap_irqs[] = {
 	REGMAP_IRQ_REG(BXTWC_CHGR_LVL1_IRQ, 0, BIT(5)),
 	REGMAP_IRQ_REG(BXTWC_GPIO_LVL1_IRQ, 0, BIT(6)),
 	REGMAP_IRQ_REG(BXTWC_CRIT_LVL1_IRQ, 0, BIT(7)),
-	REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 1, 0x03),
+};
+
+static const struct regmap_irq bxtwc_regmap_irqs_pwrbtn[] = {
+	REGMAP_IRQ_REG(BXTWC_PWRBTN_IRQ, 0, 0x01),
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs_bcu[] = {
@@ -125,7 +120,7 @@ static const struct regmap_irq bxtwc_regmap_irqs_adc[] = {
 };
 
 static const struct regmap_irq bxtwc_regmap_irqs_chgr[] = {
-	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 0, BIT(5)),
+	REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 0, 0x20),
 	REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 0, 0x1f),
 	REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 1, 0x1f),
 };
@@ -144,7 +139,16 @@ static struct regmap_irq_chip bxtwc_regmap_irq_chip = {
 	.mask_base = BXTWC_MIRQLVL1,
 	.irqs = bxtwc_regmap_irqs,
 	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs),
-	.num_regs = 2,
+	.num_regs = 1,
+};
+
+static struct regmap_irq_chip bxtwc_regmap_irq_chip_pwrbtn = {
+	.name = "bxtwc_irq_chip_pwrbtn",
+	.status_base = BXTWC_PWRBTNIRQ,
+	.mask_base = BXTWC_MPWRBTNIRQ,
+	.irqs = bxtwc_regmap_irqs_pwrbtn,
+	.num_irqs = ARRAY_SIZE(bxtwc_regmap_irqs_pwrbtn),
+	.num_regs = 1,
 };
 
 static struct regmap_irq_chip bxtwc_regmap_irq_chip_tmu = {
@@ -472,6 +476,16 @@ static int bxtwc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
+					 BXTWC_PWRBTN_LVL1_IRQ,
+					 IRQF_ONESHOT,
+					 &bxtwc_regmap_irq_chip_pwrbtn,
+					 &pmic->irq_chip_data_pwrbtn);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add PWRBTN IRQ chip\n");
+		return ret;
+	}
+
 	ret = bxtwc_add_chained_irq_chip(pmic, pmic->irq_chip_data,
 					 BXTWC_TMU_LVL1_IRQ,
 					 IRQF_ONESHOT,

drivers/mfd/intel_soc_pmic_chtdc_ti.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device access for Dollar Cove TI PMIC
  *
@@ -6,10 +7,6 @@
  *
  * Cleanup and forward-ported
  *   Copyright (c) 2017 Takashi Iwai <tiwai@suse.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/acpi.h>

drivers/mfd/intel_soc_pmic_chtwc.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * MFD core driver for Intel Cherrytrail Whiskey Cove PMIC
  *
@@ -5,10 +6,6 @@
  *
  * Based on various non upstream patches to support the CHT Whiskey Cove PMIC:
  * Copyright (C) 2013-2015 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <linux/acpi.h>

drivers/mfd/intel_soc_pmic_core.c

@@ -1,31 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * intel_soc_pmic_core.c - Intel SoC PMIC MFD Driver
+ * Intel SoC PMIC MFD Driver
  *
  * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Author: Yang, Bin <bin.yang@intel.com>
  * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
  */
 
-#include <linux/module.h>
+#include <linux/acpi.h>
-#include <linux/mfd/core.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
+#include <linux/module.h>
-#include <linux/acpi.h>
+#include <linux/mfd/core.h>
-#include <linux/regmap.h>
 #include <linux/mfd/intel_soc_pmic.h>
-#include <linux/gpio/machine.h>
 #include <linux/pwm.h>
+#include <linux/regmap.h>
+
 #include "intel_soc_pmic_core.h"
 
 /* Crystal Cove PMIC shares same ACPI ID between different platforms */

drivers/mfd/intel_soc_pmic_core.h

@@ -1,17 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
- * intel_soc_pmic_core.h - Intel SoC PMIC MFD Driver
+ * Intel SoC PMIC MFD Driver
  *
  * Copyright (C) 2012-2014 Intel Corporation. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Author: Yang, Bin <bin.yang@intel.com>
  * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
  */

drivers/mfd/intel_soc_pmic_crc.c

@@ -1,25 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * intel_soc_pmic_crc.c - Device access for Crystal Cove PMIC
+ * Device access for Crystal Cove PMIC
  *
  * Copyright (C) 2013, 2014 Intel Corporation. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Author: Yang, Bin <bin.yang@intel.com>
  * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
  */
 
-#include <linux/mfd/core.h>
 #include <linux/interrupt.h>
 #include <linux/regmap.h>
+#include <linux/mfd/core.h>
 #include <linux/mfd/intel_soc_pmic.h>
+
 #include "intel_soc_pmic_core.h"
 
 #define CRYSTAL_COVE_MAX_REGISTER	0xC6
@@ -36,48 +29,23 @@
 #define CRYSTAL_COVE_IRQ_VHDMIOCP	6
 
 static struct resource gpio_resources[] = {
-	{
+	DEFINE_RES_IRQ_NAMED(CRYSTAL_COVE_IRQ_GPIO, "GPIO"),
-		.name	= "GPIO",
-		.start	= CRYSTAL_COVE_IRQ_GPIO,
-		.end	= CRYSTAL_COVE_IRQ_GPIO,
-		.flags	= IORESOURCE_IRQ,
-	},
 };
 
 static struct resource pwrsrc_resources[] = {
-	{
+	DEFINE_RES_IRQ_NAMED(CRYSTAL_COVE_IRQ_PWRSRC, "PWRSRC"),
-		.name  = "PWRSRC",
-		.start = CRYSTAL_COVE_IRQ_PWRSRC,
-		.end   = CRYSTAL_COVE_IRQ_PWRSRC,
-		.flags = IORESOURCE_IRQ,
-	},
 };
 
 static struct resource adc_resources[] = {
-	{
+	DEFINE_RES_IRQ_NAMED(CRYSTAL_COVE_IRQ_ADC, "ADC"),
-		.name  = "ADC",
-		.start = CRYSTAL_COVE_IRQ_ADC,
-		.end   = CRYSTAL_COVE_IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
 };
 
 static struct resource thermal_resources[] = {
-	{
+	DEFINE_RES_IRQ_NAMED(CRYSTAL_COVE_IRQ_THRM, "THERMAL"),
-		.name  = "THERMAL",
-		.start = CRYSTAL_COVE_IRQ_THRM,
-		.end   = CRYSTAL_COVE_IRQ_THRM,
-		.flags = IORESOURCE_IRQ,
-	},
 };
 
 static struct resource bcu_resources[] = {
-	{
+	DEFINE_RES_IRQ_NAMED(CRYSTAL_COVE_IRQ_BCU, "BCU"),
-		.name  = "BCU",
-		.start = CRYSTAL_COVE_IRQ_BCU,
-		.end   = CRYSTAL_COVE_IRQ_BCU,
-		.flags = IORESOURCE_IRQ,
-	},
 };
 
 static struct mfd_cell crystal_cove_byt_dev[] = {
@@ -134,27 +102,13 @@ static const struct regmap_config crystal_cove_regmap_config = {
 };
 
 static const struct regmap_irq crystal_cove_irqs[] = {
-	[CRYSTAL_COVE_IRQ_PWRSRC] = {
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_PWRSRC, 0, BIT(CRYSTAL_COVE_IRQ_PWRSRC)),
-		.mask = BIT(CRYSTAL_COVE_IRQ_PWRSRC),
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_THRM, 0, BIT(CRYSTAL_COVE_IRQ_THRM)),
-	},
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_BCU, 0, BIT(CRYSTAL_COVE_IRQ_BCU)),
-	[CRYSTAL_COVE_IRQ_THRM] = {
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_ADC, 0, BIT(CRYSTAL_COVE_IRQ_ADC)),
-		.mask = BIT(CRYSTAL_COVE_IRQ_THRM),
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_CHGR, 0, BIT(CRYSTAL_COVE_IRQ_CHGR)),
-	},
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_GPIO, 0, BIT(CRYSTAL_COVE_IRQ_GPIO)),
-	[CRYSTAL_COVE_IRQ_BCU] = {
+	REGMAP_IRQ_REG(CRYSTAL_COVE_IRQ_VHDMIOCP, 0, BIT(CRYSTAL_COVE_IRQ_VHDMIOCP)),
-		.mask = BIT(CRYSTAL_COVE_IRQ_BCU),
-	},
-	[CRYSTAL_COVE_IRQ_ADC] = {
-		.mask = BIT(CRYSTAL_COVE_IRQ_ADC),
-	},
-	[CRYSTAL_COVE_IRQ_CHGR] = {
-		.mask = BIT(CRYSTAL_COVE_IRQ_CHGR),
-	},
-	[CRYSTAL_COVE_IRQ_GPIO] = {
-		.mask = BIT(CRYSTAL_COVE_IRQ_GPIO),
-	},
-	[CRYSTAL_COVE_IRQ_VHDMIOCP] = {
-		.mask = BIT(CRYSTAL_COVE_IRQ_VHDMIOCP),
-	},
 };
 
 static const struct regmap_irq_chip crystal_cove_irq_chip = {

drivers/mfd/madera-core.c

@@ -132,32 +132,39 @@ const char *madera_name_from_type(enum madera_type type)
 }
 EXPORT_SYMBOL_GPL(madera_name_from_type);
 
-#define MADERA_BOOT_POLL_MAX_INTERVAL_US  5000
+#define MADERA_BOOT_POLL_INTERVAL_USEC		5000
-#define MADERA_BOOT_POLL_TIMEOUT_US	 25000
+#define MADERA_BOOT_POLL_TIMEOUT_USEC		25000
 
 static int madera_wait_for_boot(struct madera *madera)
 {
+	ktime_t timeout;
 	unsigned int val;
-	int ret;
+	int ret = 0;
 
 	/*
 	 * We can't use an interrupt as we need to runtime resume to do so,
 	 * so we poll the status bit. This won't race with the interrupt
 	 * handler because it will be blocked on runtime resume.
+	 * The chip could NAK a read request while it is booting so ignore
+	 * errors from regmap_read.
 	 */
-	ret = regmap_read_poll_timeout(madera->regmap,
+	timeout = ktime_add_us(ktime_get(), MADERA_BOOT_POLL_TIMEOUT_USEC);
-				       MADERA_IRQ1_RAW_STATUS_1,
+	regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
-				       val,
+	while (!(val & MADERA_BOOT_DONE_STS1) &&
-				       (val & MADERA_BOOT_DONE_STS1),
+	       !ktime_after(ktime_get(), timeout)) {
-				       MADERA_BOOT_POLL_MAX_INTERVAL_US,
+		usleep_range(MADERA_BOOT_POLL_INTERVAL_USEC / 2,
-				       MADERA_BOOT_POLL_TIMEOUT_US);
+			     MADERA_BOOT_POLL_INTERVAL_USEC);
+		regmap_read(madera->regmap, MADERA_IRQ1_RAW_STATUS_1, &val);
+	};
 
-	if (ret)
+	if (!(val & MADERA_BOOT_DONE_STS1)) {
-		dev_err(madera->dev, "Polling BOOT_DONE_STS failed: %d\n", ret);
+		dev_err(madera->dev, "Polling BOOT_DONE_STS timed out\n");
+		ret = -ETIMEDOUT;
+	}
 
 	/*
 	 * BOOT_DONE defaults to unmasked on boot so we must ack it.
-	 * Do this unconditionally to avoid interrupt storms.
+	 * Do this even after a timeout to avoid interrupt storms.
 	 */
 	regmap_write(madera->regmap, MADERA_IRQ1_STATUS_1,
 		     MADERA_BOOT_DONE_EINT1);

drivers/mfd/max14577.c

@@ -1,22 +1,12 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * max14577.c - mfd core driver for the Maxim 14577/77836
+//
- *
+// max14577.c - mfd core driver for the Maxim 14577/77836
- * Copyright (C) 2014 Samsung Electronics
+//
- * Chanwoo Choi <cw00.choi@samsung.com>
+// Copyright (C) 2014 Samsung Electronics
- * Krzysztof Kozlowski <krzk@kernel.org>
+// Chanwoo Choi <cw00.choi@samsung.com>
- *
+// Krzysztof Kozlowski <krzk@kernel.org>
- * This program is free software; you can redistribute it and/or modify
+//
- * it under the terms of the GNU General Public License as published by
+// This driver is based on max8997.c
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * This driver is based on max8997.c
- */
 
 #include <linux/err.h>
 #include <linux/module.h>

drivers/mfd/max77620.c

@@ -285,7 +285,7 @@ static int max77620_config_fps(struct max77620_chip *chip,
 	}
 
 	if (fps_id == MAX77620_FPS_COUNT) {
-		dev_err(dev, "FPS node name %s is not valid\n", fps_np->name);
+		dev_err(dev, "FPS node name %pOFn is not valid\n", fps_np);
 		return -EINVAL;
 	}
 

drivers/mfd/max77686.c

@@ -1,26 +1,12 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * max77686.c - mfd core driver for the Maxim 77686/802
+//
- *
+// max77686.c - mfd core driver for the Maxim 77686/802
- * Copyright (C) 2012 Samsung Electronics
+//
- * Chiwoong Byun <woong.byun@samsung.com>
+// Copyright (C) 2012 Samsung Electronics
- * Jonghwa Lee <jonghwa3.lee@samsung.com>
+// Chiwoong Byun <woong.byun@samsung.com>
- *
+// Jonghwa Lee <jonghwa3.lee@samsung.com>
- * This program is free software; you can redistribute it and/or modify
+//
- * it under the terms of the GNU General Public License as published by
+//This driver is based on max8997.c
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8997.c
- */
 
 #include <linux/export.h>
 #include <linux/slab.h>

drivers/mfd/max77693.c

@@ -1,27 +1,13 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * max77693.c - mfd core driver for the MAX 77693
+//
- *
+// max77693.c - mfd core driver for the MAX 77693
- * Copyright (C) 2012 Samsung Electronics
+//
- * SangYoung Son <hello.son@samsung.com>
+// Copyright (C) 2012 Samsung Electronics
- *
+// SangYoung Son <hello.son@samsung.com>
- * This program is not provided / owned by Maxim Integrated Products.
+//
- *
+// This program is not provided / owned by Maxim Integrated Products.
- * This program is free software; you can redistribute it and/or modify
+//
- * it under the terms of the GNU General Public License as published by
+// This driver is based on max8997.c
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8997.c
- */
 
 #include <linux/module.h>
 #include <linux/slab.h>

drivers/mfd/max77843.c

@@ -1,15 +1,10 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * MFD core driver for the Maxim MAX77843
+//
- *
+// MFD core driver for the Maxim MAX77843
- * Copyright (C) 2015 Samsung Electronics
+//
- * Author: Jaewon Kim <jaewon02.kim@samsung.com>
+// Copyright (C) 2015 Samsung Electronics
- * Author: Beomho Seo <beomho.seo@samsung.com>
+// Author: Jaewon Kim <jaewon02.kim@samsung.com>
- *
+// Author: Beomho Seo <beomho.seo@samsung.com>
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
 
 #include <linux/err.h>
 #include <linux/i2c.h>

drivers/mfd/max8997-irq.c

@@ -1,25 +1,11 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * max8997-irq.c - Interrupt controller support for MAX8997
+//
- *
+// max8997-irq.c - Interrupt controller support for MAX8997
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
+//
- * MyungJoo Ham <myungjoo.ham@samsung.com>
+// Copyright (C) 2011 Samsung Electronics Co.Ltd
- *
+// MyungJoo Ham <myungjoo.ham@samsung.com>
- * This program is free software; you can redistribute it and/or modify
+//
- * it under the terms of the GNU General Public License as published by
+// This driver is based on max8998-irq.c
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8998-irq.c
- */
 
 #include <linux/err.h>
 #include <linux/irq.h>

drivers/mfd/max8997.c

@@ -1,25 +1,11 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * max8997.c - mfd core driver for the Maxim 8966 and 8997
+//
- *
+// max8997.c - mfd core driver for the Maxim 8966 and 8997
- * Copyright (C) 2011 Samsung Electronics
+//
- * MyungJoo Ham <myungjoo.ham@samsung.com>
+// Copyright (C) 2011 Samsung Electronics
- *
+// MyungJoo Ham <myungjoo.ham@samsung.com>
- * This program is free software; you can redistribute it and/or modify
+//
- * it under the terms of the GNU General Public License as published by
+// This driver is based on max8998.c
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * This driver is based on max8998.c
- */
 
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -153,12 +139,6 @@ static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
 
 	pd->ono = irq_of_parse_and_map(dev->of_node, 1);
 
-	/*
-	 * ToDo: the 'wakeup' member in the platform data is more of a linux
-	 * specfic information. Hence, there is no binding for that yet and
-	 * not parsed here.
-	 */
-
 	return pd;
 }
 
@@ -246,7 +226,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	 */
 
 	/* MAX8997 has a power button input. */
-	device_init_wakeup(max8997->dev, pdata->wakeup);
+	device_init_wakeup(max8997->dev, true);
 
 	return ret;
 
@@ -468,6 +448,7 @@ static int max8997_suspend(struct device *dev)
 	struct i2c_client *i2c = to_i2c_client(dev);
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
 
+	disable_irq(max8997->irq);
 	if (device_may_wakeup(dev))
 		irq_set_irq_wake(max8997->irq, 1);
 	return 0;
@@ -480,6 +461,7 @@ static int max8997_resume(struct device *dev)
 
 	if (device_may_wakeup(dev))
 		irq_set_irq_wake(max8997->irq, 0);
+	enable_irq(max8997->irq);
 	return max8997_irq_resume(max8997);
 }
 

drivers/mfd/max8998-irq.c

@@ -1,15 +1,9 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * Interrupt controller support for MAX8998
+//
- *
+// Interrupt controller support for MAX8998
- * Copyright (C) 2010 Samsung Electronics Co.Ltd
+//
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+// Copyright (C) 2010 Samsung Electronics Co.Ltd
- *
+// Author: Joonyoung Shim <jy0922.shim@samsung.com>
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
 
 #include <linux/device.h>
 #include <linux/interrupt.h>

drivers/mfd/max8998.c

@@ -1,24 +1,10 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * max8998.c - mfd core driver for the Maxim 8998
+//
- *
+// max8998.c - mfd core driver for the Maxim 8998
- *  Copyright (C) 2009-2010 Samsung Electronics
+//
- *  Kyungmin Park <kyungmin.park@samsung.com>
+//  Copyright (C) 2009-2010 Samsung Electronics
- *  Marek Szyprowski <m.szyprowski@samsung.com>
+//  Kyungmin Park <kyungmin.park@samsung.com>
- *
+//  Marek Szyprowski <m.szyprowski@samsung.com>
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
 
 #include <linux/err.h>
 #include <linux/init.h>

drivers/mfd/mc13xxx-core.c

@@ -276,7 +276,8 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 
 	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
 
-	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
+	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2 |
+	       MC13XXX_ADC0_CHRGRAWDIV;
 	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
 
 	/*

drivers/mfd/menelaus.c

@@ -1094,6 +1094,7 @@ static void menelaus_rtc_alarm_work(struct menelaus_chip *m)
 static inline void menelaus_rtc_init(struct menelaus_chip *m)
 {
 	int	alarm = (m->client->irq > 0);
+	int	err;
 
 	/* assume 32KDETEN pin is pulled high */
 	if (!(menelaus_read_reg(MENELAUS_OSC_CTRL) & 0x80)) {
@@ -1101,6 +1102,12 @@ static inline void menelaus_rtc_init(struct menelaus_chip *m)
 		return;
 	}
 
+	m->rtc = devm_rtc_allocate_device(&m->client->dev);
+	if (IS_ERR(m->rtc))
+		return;
+
+	m->rtc->ops = &menelaus_rtc_ops;
+
 	/* support RTC alarm; it can issue wakeups */
 	if (alarm) {
 		if (menelaus_add_irq_work(MENELAUS_RTCALM_IRQ,
@@ -1125,10 +1132,8 @@ static inline void menelaus_rtc_init(struct menelaus_chip *m)
 		menelaus_write_reg(MENELAUS_RTC_CTRL, m->rtc_control);
 	}
 
-	m->rtc = rtc_device_register(DRIVER_NAME,
+	err = rtc_register_device(m->rtc);
-			&m->client->dev,
+	if (err) {
-			&menelaus_rtc_ops, THIS_MODULE);
-	if (IS_ERR(m->rtc)) {
 		if (alarm) {
 			menelaus_remove_irq_work(MENELAUS_RTCALM_IRQ);
 			device_init_wakeup(&m->client->dev, 0);

drivers/mfd/motorola-cpcap.c

@@ -18,6 +18,7 @@
 #include <linux/regmap.h>
 #include <linux/sysfs.h>
 
+#include <linux/mfd/core.h>
 #include <linux/mfd/motorola-cpcap.h>
 #include <linux/spi/spi.h>
 
@@ -216,6 +217,53 @@ static const struct regmap_config cpcap_regmap_config = {
 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
 };
 
+static const struct mfd_cell cpcap_mfd_devices[] = {
+	{
+		.name          = "cpcap_adc",
+		.of_compatible = "motorola,mapphone-cpcap-adc",
+	}, {
+		.name          = "cpcap_battery",
+		.of_compatible = "motorola,cpcap-battery",
+	}, {
+		.name          = "cpcap-charger",
+		.of_compatible = "motorola,mapphone-cpcap-charger",
+	}, {
+		.name          = "cpcap-regulator",
+		.of_compatible = "motorola,mapphone-cpcap-regulator",
+	}, {
+		.name          = "cpcap-rtc",
+		.of_compatible = "motorola,cpcap-rtc",
+	}, {
+		.name          = "cpcap-pwrbutton",
+		.of_compatible = "motorola,cpcap-pwrbutton",
+	}, {
+		.name          = "cpcap-usb-phy",
+		.of_compatible = "motorola,mapphone-cpcap-usb-phy",
+	}, {
+		.name          = "cpcap-led",
+		.id            = 0,
+		.of_compatible = "motorola,cpcap-led-red",
+	}, {
+		.name          = "cpcap-led",
+		.id            = 1,
+		.of_compatible = "motorola,cpcap-led-green",
+	}, {
+		.name          = "cpcap-led",
+		.id            = 2,
+		.of_compatible = "motorola,cpcap-led-blue",
+	}, {
+		.name          = "cpcap-led",
+		.id            = 3,
+		.of_compatible = "motorola,cpcap-led-adl",
+	}, {
+		.name          = "cpcap-led",
+		.id            = 4,
+		.of_compatible = "motorola,cpcap-led-cp",
+	}, {
+		.name          = "cpcap-codec",
+	}
+};
+
 static int cpcap_probe(struct spi_device *spi)
 {
 	const struct of_device_id *match;
@@ -260,7 +308,8 @@ static int cpcap_probe(struct spi_device *spi)
 	if (ret)
 		return ret;
 
-	return devm_of_platform_populate(&cpcap->spi->dev);
+	return devm_mfd_add_devices(&spi->dev, 0, cpcap_mfd_devices,
+				    ARRAY_SIZE(cpcap_mfd_devices), NULL, 0, NULL);
 }
 
 static struct spi_driver cpcap_driver = {

drivers/mfd/sec-core.c

@@ -1,15 +1,7 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * sec-core.c
+//
- *
+// Copyright (c) 2012 Samsung Electronics Co., Ltd
- * Copyright (c) 2012 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
- *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>

drivers/mfd/sec-irq.c

@@ -1,19 +1,12 @@
-/*
+// SPDX-License-Identifier: GPL-2.0+
- * sec-irq.c
+//
- *
+// Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
- * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
+//              http://www.samsung.com
- *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- */
 
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/module.h>
 #include <linux/regmap.h>
 
 #include <linux/mfd/samsung/core.h>
@@ -501,3 +494,10 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(sec_irq_init);
+
+MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Interrupt support for the S5M MFD");
+MODULE_LICENSE("GPL");

drivers/mfd/ti-lmu.c

@@ -12,7 +12,7 @@
 
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/mfd/core.h>
@@ -21,28 +21,18 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 
 struct ti_lmu_data {
-	struct mfd_cell *cells;
+	const struct mfd_cell *cells;
 	int num_cells;
 	unsigned int max_register;
 };
 
 static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
 {
-	int ret;
+	if (lmu->en_gpio)
-
+		gpiod_set_value(lmu->en_gpio, 1);
-	if (gpio_is_valid(lmu->en_gpio)) {
-		ret = devm_gpio_request_one(lmu->dev, lmu->en_gpio,
-					    GPIOF_OUT_INIT_HIGH, "lmu_hwen");
-		if (ret) {
-			dev_err(lmu->dev, "Can not request enable GPIO: %d\n",
-				ret);
-			return ret;
-		}
-	}
 
 	/* Delay about 1ms after HW enable pin control */
 	usleep_range(1000, 1500);
@@ -57,13 +47,14 @@ static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
 	return 0;
 }
 
-static void ti_lmu_disable_hw(struct ti_lmu *lmu)
+static void ti_lmu_disable_hw(void *data)
 {
-	if (gpio_is_valid(lmu->en_gpio))
+	struct ti_lmu *lmu = data;
-		gpio_set_value(lmu->en_gpio, 0);
+	if (lmu->en_gpio)
+		gpiod_set_value(lmu->en_gpio, 0);
 }
 
-static struct mfd_cell lm3532_devices[] = {
+static const struct mfd_cell lm3532_devices[] = {
 	{
 		.name          = "ti-lmu-backlight",
 		.id            = LM3532,
@@ -78,7 +69,7 @@ static struct mfd_cell lm3532_devices[] = {
 	.of_compatible = "ti,lm363x-regulator",	\
 }						\
 
-static struct mfd_cell lm3631_devices[] = {
+static const struct mfd_cell lm3631_devices[] = {
 	LM363X_REGULATOR(LM3631_BOOST),
 	LM363X_REGULATOR(LM3631_LDO_CONT),
 	LM363X_REGULATOR(LM3631_LDO_OREF),
@@ -91,7 +82,7 @@ static struct mfd_cell lm3631_devices[] = {
 	},
 };
 
-static struct mfd_cell lm3632_devices[] = {
+static const struct mfd_cell lm3632_devices[] = {
 	LM363X_REGULATOR(LM3632_BOOST),
 	LM363X_REGULATOR(LM3632_LDO_POS),
 	LM363X_REGULATOR(LM3632_LDO_NEG),
@@ -102,7 +93,7 @@ static struct mfd_cell lm3632_devices[] = {
 	},
 };
 
-static struct mfd_cell lm3633_devices[] = {
+static const struct mfd_cell lm3633_devices[] = {
 	{
 		.name          = "ti-lmu-backlight",
 		.id            = LM3633,
@@ -120,7 +111,7 @@ static struct mfd_cell lm3633_devices[] = {
 	},
 };
 
-static struct mfd_cell lm3695_devices[] = {
+static const struct mfd_cell lm3695_devices[] = {
 	{
 		.name          = "ti-lmu-backlight",
 		.id            = LM3695,
@@ -128,7 +119,7 @@ static struct mfd_cell lm3695_devices[] = {
 	},
 };
 
-static struct mfd_cell lm3697_devices[] = {
+static const struct mfd_cell lm3697_devices[] = {
 	{
 		.name          = "ti-lmu-backlight",
 		.id            = LM3697,
@@ -157,34 +148,21 @@ TI_LMU_DATA(lm3633, LM3633_MAX_REG);
 TI_LMU_DATA(lm3695, LM3695_MAX_REG);
 TI_LMU_DATA(lm3697, LM3697_MAX_REG);
 
-static const struct of_device_id ti_lmu_of_match[] = {
-	{ .compatible = "ti,lm3532", .data = &lm3532_data },
-	{ .compatible = "ti,lm3631", .data = &lm3631_data },
-	{ .compatible = "ti,lm3632", .data = &lm3632_data },
-	{ .compatible = "ti,lm3633", .data = &lm3633_data },
-	{ .compatible = "ti,lm3695", .data = &lm3695_data },
-	{ .compatible = "ti,lm3697", .data = &lm3697_data },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
-
 static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
 	struct device *dev = &cl->dev;
-	const struct of_device_id *match;
 	const struct ti_lmu_data *data;
 	struct regmap_config regmap_cfg;
 	struct ti_lmu *lmu;
 	int ret;
 
-	match = of_match_device(ti_lmu_of_match, dev);
-	if (!match)
-		return -ENODEV;
 	/*
 	 * Get device specific data from of_match table.
 	 * This data is defined by using TI_LMU_DATA() macro.
 	 */
-	data = (struct ti_lmu_data *)match->data;
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
 
 	lmu = devm_kzalloc(dev, sizeof(*lmu), GFP_KERNEL);
 	if (!lmu)
@@ -204,11 +182,21 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 		return PTR_ERR(lmu->regmap);
 
 	/* HW enable pin control and additional power up sequence if required */
-	lmu->en_gpio = of_get_named_gpio(dev->of_node, "enable-gpios", 0);
+	lmu->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
+	if (IS_ERR(lmu->en_gpio)) {
+		ret = PTR_ERR(lmu->en_gpio);
+		dev_err(dev, "Can not request enable GPIO: %d\n", ret);
+		return ret;
+	}
+
 	ret = ti_lmu_enable_hw(lmu, id->driver_data);
 	if (ret)
 		return ret;
 
+	ret = devm_add_action_or_reset(dev, ti_lmu_disable_hw, lmu);
+	if (ret)
+		return ret;
+
 	/*
 	 * Fault circuit(open/short) can be detected by ti-lmu-fault-monitor.
 	 * After fault detection is done, some devices should re-initialize
@@ -218,18 +206,20 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 
 	i2c_set_clientdata(cl, lmu);
 
-	return mfd_add_devices(lmu->dev, 0, data->cells,
+	return devm_mfd_add_devices(lmu->dev, 0, data->cells,
-			       data->num_cells, NULL, 0, NULL);
+				    data->num_cells, NULL, 0, NULL);
 }
 
-static int ti_lmu_remove(struct i2c_client *cl)
+static const struct of_device_id ti_lmu_of_match[] = {
-{
+	{ .compatible = "ti,lm3532", .data = &lm3532_data },
-	struct ti_lmu *lmu = i2c_get_clientdata(cl);
+	{ .compatible = "ti,lm3631", .data = &lm3631_data },
-
+	{ .compatible = "ti,lm3632", .data = &lm3632_data },
-	ti_lmu_disable_hw(lmu);
+	{ .compatible = "ti,lm3633", .data = &lm3633_data },
-	mfd_remove_devices(lmu->dev);
+	{ .compatible = "ti,lm3695", .data = &lm3695_data },
-	return 0;
+	{ .compatible = "ti,lm3697", .data = &lm3697_data },
-}
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
 
 static const struct i2c_device_id ti_lmu_ids[] = {
 	{ "lm3532", LM3532 },
@@ -244,7 +234,6 @@ MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);
 
 static struct i2c_driver ti_lmu_driver = {
 	.probe = ti_lmu_probe,
-	.remove = ti_lmu_remove,
 	.driver = {
 		.name = "ti-lmu",
 		.of_match_table = ti_lmu_of_match,

drivers/mfd/ti_am335x_tscadc.c

@@ -269,7 +269,6 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	if (err < 0)
 		goto err_disable_clk;
 
-	device_init_wakeup(&pdev->dev, true);
 	platform_set_drvdata(pdev, tscadc);
 	return 0;
 
@@ -294,11 +293,24 @@ static int ti_tscadc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static int __maybe_unused ti_tscadc_can_wakeup(struct device *dev, void *data)
+{
+	return device_may_wakeup(dev);
+}
+
 static int __maybe_unused tscadc_suspend(struct device *dev)
 {
 	struct ti_tscadc_dev	*tscadc = dev_get_drvdata(dev);
 
 	regmap_write(tscadc->regmap, REG_SE, 0x00);
+	if (device_for_each_child(dev, NULL, ti_tscadc_can_wakeup)) {
+		u32 ctrl;
+
+		regmap_read(tscadc->regmap, REG_CTRL, &ctrl);
+		ctrl &= ~(CNTRLREG_POWERDOWN);
+		ctrl |= CNTRLREG_TSCSSENB;
+		regmap_write(tscadc->regmap, REG_CTRL, ctrl);
+	}
 	pm_runtime_put_sync(dev);
 
 	return 0;

drivers/spi/Kconfig

@@ -83,6 +83,14 @@ config SPI_ATMEL
 	  This selects a driver for the Atmel SPI Controller, present on
 	  many AT91 ARM chips.
 
+config SPI_AT91_USART
+	tristate "Atmel USART Controller SPI driver"
+	depends on (ARCH_AT91 || COMPILE_TEST)
+	depends on MFD_AT91_USART
+	help
+	  This selects a driver for the AT91 USART Controller as SPI Master,
+	  present on AT91 and SAMA5 SoC series.
+
 config SPI_AU1550
 	tristate "Au1550/Au1200/Au1300 SPI Controller"
 	depends on MIPS_ALCHEMY

drivers/spi/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST)		+= spi-loopback-test.o
 obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.o
 obj-$(CONFIG_SPI_ARMADA_3700)		+= spi-armada-3700.o
 obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
+obj-$(CONFIG_SPI_AT91_USART)		+= spi-at91-usart.o
 obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
 obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
 obj-$(CONFIG_SPI_AXI_SPI_ENGINE)	+= spi-axi-spi-engine.o

drivers/spi/spi-at91-usart.c

@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Driver for AT91 USART Controllers as SPI
+//
+// Copyright (C) 2018 Microchip Technology Inc.
+//
+// Author: Radu Pirea <radu.pirea@microchip.com>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+
+#include <linux/spi/spi.h>
+
+#define US_CR			0x00
+#define US_MR			0x04
+#define US_IER			0x08
+#define US_IDR			0x0C
+#define US_CSR			0x14
+#define US_RHR			0x18
+#define US_THR			0x1C
+#define US_BRGR			0x20
+#define US_VERSION		0xFC
+
+#define US_CR_RSTRX		BIT(2)
+#define US_CR_RSTTX		BIT(3)
+#define US_CR_RXEN		BIT(4)
+#define US_CR_RXDIS		BIT(5)
+#define US_CR_TXEN		BIT(6)
+#define US_CR_TXDIS		BIT(7)
+
+#define US_MR_SPI_MASTER	0x0E
+#define US_MR_CHRL		GENMASK(7, 6)
+#define US_MR_CPHA		BIT(8)
+#define US_MR_CPOL		BIT(16)
+#define US_MR_CLKO		BIT(18)
+#define US_MR_WRDBT		BIT(20)
+#define US_MR_LOOP		BIT(15)
+
+#define US_IR_RXRDY		BIT(0)
+#define US_IR_TXRDY		BIT(1)
+#define US_IR_OVRE		BIT(5)
+
+#define US_BRGR_SIZE		BIT(16)
+
+#define US_MIN_CLK_DIV		0x06
+#define US_MAX_CLK_DIV		BIT(16)
+
+#define US_RESET		(US_CR_RSTRX | US_CR_RSTTX)
+#define US_DISABLE		(US_CR_RXDIS | US_CR_TXDIS)
+#define US_ENABLE		(US_CR_RXEN | US_CR_TXEN)
+#define US_OVRE_RXRDY_IRQS	(US_IR_OVRE | US_IR_RXRDY)
+
+#define US_INIT \
+	(US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
+
+/* Register access macros */
+#define at91_usart_spi_readl(port, reg) \
+	readl_relaxed((port)->regs + US_##reg)
+#define at91_usart_spi_writel(port, reg, value) \
+	writel_relaxed((value), (port)->regs + US_##reg)
+
+#define at91_usart_spi_readb(port, reg) \
+	readb_relaxed((port)->regs + US_##reg)
+#define at91_usart_spi_writeb(port, reg, value) \
+	writeb_relaxed((value), (port)->regs + US_##reg)
+
+struct at91_usart_spi {
+	struct spi_transfer	*current_transfer;
+	void __iomem		*regs;
+	struct device		*dev;
+	struct clk		*clk;
+
+	/*used in interrupt to protect data reading*/
+	spinlock_t		lock;
+
+	int			irq;
+	unsigned int		current_tx_remaining_bytes;
+	unsigned int		current_rx_remaining_bytes;
+
+	u32			spi_clk;
+	u32			status;
+
+	bool			xfer_failed;
+};
+
+static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
+{
+	return aus->status & US_IR_TXRDY;
+}
+
+static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
+{
+	return aus->status & US_IR_RXRDY;
+}
+
+static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
+{
+	return aus->status & US_IR_OVRE;
+}
+
+static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
+{
+	aus->status = at91_usart_spi_readl(aus, CSR);
+	return aus->status;
+}
+
+static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
+{
+	unsigned int len = aus->current_transfer->len;
+	unsigned int remaining = aus->current_tx_remaining_bytes;
+	const u8  *tx_buf = aus->current_transfer->tx_buf;
+
+	if (!remaining)
+		return;
+
+	if (at91_usart_spi_tx_ready(aus)) {
+		at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
+		aus->current_tx_remaining_bytes--;
+	}
+}
+
+static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
+{
+	int len = aus->current_transfer->len;
+	int remaining = aus->current_rx_remaining_bytes;
+	u8  *rx_buf = aus->current_transfer->rx_buf;
+
+	if (!remaining)
+		return;
+
+	rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
+	aus->current_rx_remaining_bytes--;
+}
+
+static inline void
+at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
+			      struct spi_transfer *xfer)
+{
+	at91_usart_spi_writel(aus, BRGR,
+			      DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
+}
+
+static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
+{
+	struct spi_controller *controller = dev_id;
+	struct at91_usart_spi *aus = spi_master_get_devdata(controller);
+
+	spin_lock(&aus->lock);
+	at91_usart_spi_read_status(aus);
+
+	if (at91_usart_spi_check_overrun(aus)) {
+		aus->xfer_failed = true;
+		at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
+		spin_unlock(&aus->lock);
+		return IRQ_HANDLED;
+	}
+
+	if (at91_usart_spi_rx_ready(aus)) {
+		at91_usart_spi_rx(aus);
+		spin_unlock(&aus->lock);
+		return IRQ_HANDLED;
+	}
+
+	spin_unlock(&aus->lock);
+
+	return IRQ_NONE;
+}
+
+static int at91_usart_spi_setup(struct spi_device *spi)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
+	u32 *ausd = spi->controller_state;
+	unsigned int mr = at91_usart_spi_readl(aus, MR);
+	u8 bits = spi->bits_per_word;
+
+	if (bits != 8) {
+		dev_dbg(&spi->dev, "Only 8 bits per word are supported\n");
+		return -EINVAL;
+	}
+
+	if (spi->mode & SPI_CPOL)
+		mr |= US_MR_CPOL;
+	else
+		mr &= ~US_MR_CPOL;
+
+	if (spi->mode & SPI_CPHA)
+		mr |= US_MR_CPHA;
+	else
+		mr &= ~US_MR_CPHA;
+
+	if (spi->mode & SPI_LOOP)
+		mr |= US_MR_LOOP;
+	else
+		mr &= ~US_MR_LOOP;
+
+	if (!ausd) {
+		ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
+		if (!ausd)
+			return -ENOMEM;
+
+		spi->controller_state = ausd;
+	}
+
+	*ausd = mr;
+
+	dev_dbg(&spi->dev,
+		"setup: bpw %u mode 0x%x -> mr %d %08x\n",
+		bits, spi->mode, spi->chip_select, mr);
+
+	return 0;
+}
+
+static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
+				       struct spi_device *spi,
+				       struct spi_transfer *xfer)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+	at91_usart_spi_set_xfer_speed(aus, xfer);
+	aus->xfer_failed = false;
+	aus->current_transfer = xfer;
+	aus->current_tx_remaining_bytes = xfer->len;
+	aus->current_rx_remaining_bytes = xfer->len;
+
+	while ((aus->current_tx_remaining_bytes ||
+		aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
+		at91_usart_spi_read_status(aus);
+		at91_usart_spi_tx(aus);
+		cpu_relax();
+	}
+
+	if (aus->xfer_failed) {
+		dev_err(aus->dev, "Overrun!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
+					  struct spi_message *message)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+	struct spi_device *spi = message->spi;
+	u32 *ausd = spi->controller_state;
+
+	at91_usart_spi_writel(aus, CR, US_ENABLE);
+	at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
+	at91_usart_spi_writel(aus, MR, *ausd);
+
+	return 0;
+}
+
+static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
+					    struct spi_message *message)
+{
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
+	at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
+
+	return 0;
+}
+
+static void at91_usart_spi_cleanup(struct spi_device *spi)
+{
+	struct at91_usart_spi_device *ausd = spi->controller_state;
+
+	spi->controller_state = NULL;
+	kfree(ausd);
+}
+
+static void at91_usart_spi_init(struct at91_usart_spi *aus)
+{
+	at91_usart_spi_writel(aus, MR, US_INIT);
+	at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
+}
+
+static int at91_usart_gpio_setup(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	int i;
+	int ret;
+	int nb;
+
+	if (!np)
+		return -EINVAL;
+
+	nb = of_gpio_named_count(np, "cs-gpios");
+	for (i = 0; i < nb; i++) {
+		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
+
+		if (cs_gpio < 0)
+			return cs_gpio;
+
+		if (gpio_is_valid(cs_gpio)) {
+			ret = devm_gpio_request_one(&pdev->dev, cs_gpio,
+						    GPIOF_DIR_OUT,
+						    dev_name(&pdev->dev));
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int at91_usart_spi_probe(struct platform_device *pdev)
+{
+	struct resource *regs;
+	struct spi_controller *controller;
+	struct at91_usart_spi *aus;
+	struct clk *clk;
+	int irq;
+	int ret;
+
+	regs = platform_get_resource(to_platform_device(pdev->dev.parent),
+				     IORESOURCE_MEM, 0);
+	if (!regs)
+		return -EINVAL;
+
+	irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
+	if (irq < 0)
+		return irq;
+
+	clk = devm_clk_get(pdev->dev.parent, "usart");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = -ENOMEM;
+	controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
+	if (!controller)
+		goto at91_usart_spi_probe_fail;
+
+	ret = at91_usart_gpio_setup(pdev);
+	if (ret)
+		goto at91_usart_spi_probe_fail;
+
+	controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
+	controller->dev.of_node = pdev->dev.parent->of_node;
+	controller->bits_per_word_mask = SPI_BPW_MASK(8);
+	controller->setup = at91_usart_spi_setup;
+	controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
+	controller->transfer_one = at91_usart_spi_transfer_one;
+	controller->prepare_message = at91_usart_spi_prepare_message;
+	controller->unprepare_message = at91_usart_spi_unprepare_message;
+	controller->cleanup = at91_usart_spi_cleanup;
+	controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
+						US_MIN_CLK_DIV);
+	controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
+						US_MAX_CLK_DIV);
+	platform_set_drvdata(pdev, controller);
+
+	aus = spi_master_get_devdata(controller);
+
+	aus->dev = &pdev->dev;
+	aus->regs = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(aus->regs)) {
+		ret = PTR_ERR(aus->regs);
+		goto at91_usart_spi_probe_fail;
+	}
+
+	aus->irq = irq;
+	aus->clk = clk;
+
+	ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
+			       dev_name(&pdev->dev), controller);
+	if (ret)
+		goto at91_usart_spi_probe_fail;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		goto at91_usart_spi_probe_fail;
+
+	aus->spi_clk = clk_get_rate(clk);
+	at91_usart_spi_init(aus);
+
+	spin_lock_init(&aus->lock);
+	ret = devm_spi_register_master(&pdev->dev, controller);
+	if (ret)
+		goto at91_usart_fail_register_master;
+
+	dev_info(&pdev->dev,
+		 "AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
+		 at91_usart_spi_readl(aus, VERSION),
+		 &regs->start, irq);
+
+	return 0;
+
+at91_usart_fail_register_master:
+	clk_disable_unprepare(clk);
+at91_usart_spi_probe_fail:
+	spi_master_put(controller);
+	return ret;
+}
+
+static int at91_usart_spi_remove(struct platform_device *pdev)
+{
+	struct spi_controller *ctlr = platform_get_drvdata(pdev);
+	struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
+
+	clk_disable_unprepare(aus->clk);
+
+	return 0;
+}
+
+static const struct of_device_id at91_usart_spi_dt_ids[] = {
+	{ .compatible = "microchip,at91sam9g45-usart-spi"},
+	{ /* sentinel */}
+};
+
+MODULE_DEVICE_TABLE(of, at91_usart_spi_dt_ids);
+
+static struct platform_driver at91_usart_spi_driver = {
+	.driver = {
+		.name = "at91_usart_spi",
+	},
+	.probe = at91_usart_spi_probe,
+	.remove = at91_usart_spi_remove,
+};
+
+module_platform_driver(at91_usart_spi_driver);
+
+MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
+MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:at91_usart_spi");

drivers/tty/serial/Kconfig

@@ -118,6 +118,7 @@ config SERIAL_ATMEL
 	depends on ARCH_AT91 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
+	select MFD_AT91_USART
 	help
 	  This enables the driver for the on-chip UARTs of the Atmel
 	  AT91 processors.

drivers/tty/serial/atmel_serial.c

@@ -193,8 +193,7 @@ static struct console atmel_console;
 
 #if defined(CONFIG_OF)
 static const struct of_device_id atmel_serial_dt_ids[] = {
-	{ .compatible = "atmel,at91rm9200-usart" },
+	{ .compatible = "atmel,at91rm9200-usart-serial" },
-	{ .compatible = "atmel,at91sam9260-usart" },
 	{ /* sentinel */ }
 };
 #endif
@@ -915,6 +914,7 @@ static void atmel_tx_dma(struct uart_port *port)
 static int atmel_prepare_tx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct device *mfd_dev = port->dev->parent;
 	dma_cap_mask_t		mask;
 	struct dma_slave_config config;
 	int ret, nent;
@@ -922,7 +922,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx");
+	atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx");
 	if (atmel_port->chan_tx == NULL)
 		goto chan_err;
 	dev_info(port->dev, "using %s for tx DMA transfers\n",
@@ -1093,6 +1093,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
 static int atmel_prepare_rx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct device *mfd_dev = port->dev->parent;
 	struct dma_async_tx_descriptor *desc;
 	dma_cap_mask_t		mask;
 	struct dma_slave_config config;
@@ -1104,7 +1105,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_CYCLIC, mask);
 
-	atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx");
+	atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
 	if (atmel_port->chan_rx == NULL)
 		goto chan_err;
 	dev_info(port->dev, "using %s for rx DMA transfers\n",
@@ -2222,8 +2223,8 @@ static const char *atmel_type(struct uart_port *port)
  */
 static void atmel_release_port(struct uart_port *port)
 {
-	struct platform_device *pdev = to_platform_device(port->dev);
+	struct platform_device *mpdev = to_platform_device(port->dev->parent);
-	int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+	int size = resource_size(mpdev->resource);
 
 	release_mem_region(port->mapbase, size);
 
@@ -2238,8 +2239,8 @@ static void atmel_release_port(struct uart_port *port)
  */
 static int atmel_request_port(struct uart_port *port)
 {
-	struct platform_device *pdev = to_platform_device(port->dev);
+	struct platform_device *mpdev = to_platform_device(port->dev->parent);
-	int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+	int size = resource_size(mpdev->resource);
 
 	if (!request_mem_region(port->mapbase, size, "atmel_serial"))
 		return -EBUSY;
@@ -2341,27 +2342,28 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 {
 	int ret;
 	struct uart_port *port = &atmel_port->uart;
+	struct platform_device *mpdev = to_platform_device(pdev->dev.parent);
 
 	atmel_init_property(atmel_port, pdev);
 	atmel_set_ops(port);
 
-	uart_get_rs485_mode(&pdev->dev, &port->rs485);
+	uart_get_rs485_mode(&mpdev->dev, &port->rs485);
 
 	port->iotype		= UPIO_MEM;
 	port->flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP;
 	port->ops		= &atmel_pops;
 	port->fifosize		= 1;
 	port->dev		= &pdev->dev;
-	port->mapbase	= pdev->resource[0].start;
+	port->mapbase		= mpdev->resource[0].start;
-	port->irq	= pdev->resource[1].start;
+	port->irq		= mpdev->resource[1].start;
 	port->rs485_config	= atmel_config_rs485;
-	port->membase	= NULL;
+	port->membase		= NULL;
 
 	memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
 
 	/* for console, the clock could already be configured */
 	if (!atmel_port->clk) {
-		atmel_port->clk = clk_get(&pdev->dev, "usart");
+		atmel_port->clk = clk_get(&mpdev->dev, "usart");
 		if (IS_ERR(atmel_port->clk)) {
 			ret = PTR_ERR(atmel_port->clk);
 			atmel_port->clk = NULL;
@@ -2694,13 +2696,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
 static int atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *atmel_port;
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.parent->of_node;
 	void *data;
 	int ret = -ENODEV;
 	bool rs485_enabled;
 
 	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
+	/*
+	 * In device tree there is no node with "atmel,at91rm9200-usart-serial"
+	 * as compatible string. This driver is probed by at91-usart mfd driver
+	 * which is just a wrapper over the atmel_serial driver and
+	 * spi-at91-usart driver. All attributes needed by this driver are
+	 * found in of_node of parent.
+	 */
+	pdev->dev.of_node = np;
+
 	ret = of_alias_get_id(np, "serial");
 	if (ret < 0)
 		/* port id not found in platform data nor device-tree aliases:
@@ -2836,6 +2847,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
 
 	clk_put(atmel_port->clk);
 	atmel_port->clk = NULL;
+	pdev->dev.of_node = NULL;
 
 	return ret;
 }
@@ -2846,7 +2858,7 @@ static struct platform_driver atmel_serial_driver = {
 	.suspend	= atmel_serial_suspend,
 	.resume		= atmel_serial_resume,
 	.driver		= {
-		.name			= "atmel_usart",
+		.name			= "atmel_usart_serial",
 		.of_match_table		= of_match_ptr(atmel_serial_dt_ids),
 	},
 };

include/dt-bindings/mfd/at91-usart.h

@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides macros for AT91 USART DT bindings.
+ *
+ * Copyright (C) 2018 Microchip Technology
+ *
+ * Author: Radu Pirea <radu.pirea@microchip.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_AT91_USART_H__
+#define __DT_BINDINGS_AT91_USART_H__
+
+#define AT91_USART_MODE_SERIAL	0
+#define AT91_USART_MODE_SPI	1
+
+#endif /* __DT_BINDINGS_AT91_USART_H__ */

include/linux/mfd/ingenic-tcu.h

@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for the Ingenic JZ47xx TCU driver
+ */
+#ifndef __LINUX_MFD_INGENIC_TCU_H_
+#define __LINUX_MFD_INGENIC_TCU_H_
+
+#include <linux/bitops.h>
+
+#define TCU_REG_WDT_TDR		0x00
+#define TCU_REG_WDT_TCER	0x04
+#define TCU_REG_WDT_TCNT	0x08
+#define TCU_REG_WDT_TCSR	0x0c
+#define TCU_REG_TER		0x10
+#define TCU_REG_TESR		0x14
+#define TCU_REG_TECR		0x18
+#define TCU_REG_TSR		0x1c
+#define TCU_REG_TFR		0x20
+#define TCU_REG_TFSR		0x24
+#define TCU_REG_TFCR		0x28
+#define TCU_REG_TSSR		0x2c
+#define TCU_REG_TMR		0x30
+#define TCU_REG_TMSR		0x34
+#define TCU_REG_TMCR		0x38
+#define TCU_REG_TSCR		0x3c
+#define TCU_REG_TDFR0		0x40
+#define TCU_REG_TDHR0		0x44
+#define TCU_REG_TCNT0		0x48
+#define TCU_REG_TCSR0		0x4c
+#define TCU_REG_OST_DR		0xe0
+#define TCU_REG_OST_CNTL	0xe4
+#define TCU_REG_OST_CNTH	0xe8
+#define TCU_REG_OST_TCSR	0xec
+#define TCU_REG_TSTR		0xf0
+#define TCU_REG_TSTSR		0xf4
+#define TCU_REG_TSTCR		0xf8
+#define TCU_REG_OST_CNTHBUF	0xfc
+
+#define TCU_TCSR_RESERVED_BITS		0x3f
+#define TCU_TCSR_PARENT_CLOCK_MASK	0x07
+#define TCU_TCSR_PRESCALE_LSB		3
+#define TCU_TCSR_PRESCALE_MASK		0x38
+
+#define TCU_TCSR_PWM_SD		BIT(9)	/* 0: Shutdown abruptly 1: gracefully */
+#define TCU_TCSR_PWM_INITL_HIGH	BIT(8)	/* Sets the initial output level */
+#define TCU_TCSR_PWM_EN		BIT(7)	/* PWM pin output enable */
+
+#define TCU_WDT_TCER_TCEN	BIT(0)	/* Watchdog timer enable */
+
+#define TCU_CHANNEL_STRIDE	0x10
+#define TCU_REG_TDFRc(c)	(TCU_REG_TDFR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TDHRc(c)	(TCU_REG_TDHR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCNTc(c)	(TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCSRc(c)	(TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
+
+#endif /* __LINUX_MFD_INGENIC_TCU_H_ */

include/linux/mfd/intel_msic.h

@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
- * include/linux/mfd/intel_msic.h - Core interface for Intel MSIC
+ * Core interface for Intel MSIC
  *
  * Copyright (C) 2011, Intel Corporation
  * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #ifndef __LINUX_MFD_INTEL_MSIC_H__

include/linux/mfd/intel_soc_pmic.h

@@ -1,17 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
- * intel_soc_pmic.h - Intel SoC PMIC Driver
+ * Intel SoC PMIC Driver
  *
  * Copyright (C) 2012-2014 Intel Corporation. All rights reserved.
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * Author: Yang, Bin <bin.yang@intel.com>
  * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
  */
@@ -25,6 +17,7 @@ struct intel_soc_pmic {
 	int irq;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *irq_chip_data;
+	struct regmap_irq_chip_data *irq_chip_data_pwrbtn;
 	struct regmap_irq_chip_data *irq_chip_data_tmu;
 	struct regmap_irq_chip_data *irq_chip_data_bcu;
 	struct regmap_irq_chip_data *irq_chip_data_adc;

include/linux/mfd/intel_soc_pmic_bxtwc.h

@@ -1,16 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Header file for Intel Broxton Whiskey Cove PMIC
  *
  * Copyright (C) 2015 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
  */
 
 #ifndef __INTEL_BXTWC_H__

include/linux/mfd/madera/core.h

@@ -148,6 +148,7 @@ struct snd_soc_dapm_context;
  * @internal_dcvdd:	true if DCVDD is supplied from the internal LDO1
  * @pdata:		our pdata
  * @irq_dev:		the irqchip child driver device
+ * @irq_data:		pointer to irqchip data for the child irqchip driver
  * @irq:		host irq number from SPI or I2C configuration
  * @out_clamp:		indicates output clamp state for each analogue output
  * @out_shorted:	indicates short circuit state for each analogue output
@@ -175,6 +176,7 @@ struct madera {
 	struct madera_pdata pdata;
 
 	struct device *irq_dev;
+	struct regmap_irq_chip_data *irq_data;
 	int irq;
 
 	unsigned int num_micbias;

include/linux/mfd/madera/pdata.h

@@ -24,7 +24,6 @@
 
 struct gpio_desc;
 struct pinctrl_map;
-struct madera_irqchip_pdata;
 struct madera_codec_pdata;
 
 /**

include/linux/mfd/max14577-private.h

@@ -1,19 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max14577-private.h - Common API for the Maxim 14577/77836 internal sub chip
  *
  * Copyright (C) 2014 Samsung Electrnoics
  * Chanwoo Choi <cw00.choi@samsung.com>
  * Krzysztof Kozlowski <krzk@kernel.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __MAX14577_PRIVATE_H__

include/linux/mfd/max14577.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max14577.h - Driver for the Maxim 14577/77836
  *
@@ -5,16 +6,6 @@
  * Chanwoo Choi <cw00.choi@samsung.com>
  * Krzysztof Kozlowski <krzk@kernel.org>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  * This driver is based on max8997.h
  *
  * MAX14577 has MUIC, Charger devices.

include/linux/mfd/max77686-private.h

@@ -1,22 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max77686-private.h - Voltage regulator driver for the Maxim 77686/802
  *
  *  Copyright (C) 2012 Samsung Electrnoics
  *  Chiwoong Byun <woong.byun@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_MFD_MAX77686_PRIV_H

include/linux/mfd/max77686.h

@@ -1,23 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max77686.h - Driver for the Maxim 77686/802
  *
  *  Copyright (C) 2012 Samsung Electrnoics
  *  Chiwoong Byun <woong.byun@samsung.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  * This driver is based on max8997.h
  *
  * MAX77686 has PMIC, RTC devices.

include/linux/mfd/max77693-common.h

@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common data shared between Maxim 77693 and 77843 drivers
  *
  * Copyright (C) 2015 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __LINUX_MFD_MAX77693_COMMON_H

include/linux/mfd/max77693-private.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max77693-private.h - Voltage regulator driver for the Maxim 77693
  *
@@ -5,20 +6,6 @@
  *  SangYoung Son <hello.son@samsung.com>
  *
  * This program is not provided / owned by Maxim Integrated Products.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_MFD_MAX77693_PRIV_H

include/linux/mfd/max77693.h

@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max77693.h - Driver for the Maxim 77693
  *
@@ -6,20 +7,6 @@
  *
  * This program is not provided / owned by Maxim Integrated Products.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  * This driver is based on max8997.h
  *
  * MAX77693 has PMIC, Charger, Flash LED, Haptic, MUIC devices.

include/linux/mfd/max77843-private.h

@@ -1,14 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Common variables for the Maxim MAX77843 driver
  *
  * Copyright (C) 2015 Samsung Electronics
  * Author: Jaewon Kim <jaewon02.kim@samsung.com>
  * Author: Beomho Seo <beomho.seo@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #ifndef __MAX77843_PRIVATE_H_

include/linux/mfd/max8997-private.h

@@ -1,22 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max8997-private.h - Voltage regulator driver for the Maxim 8997
  *
  *  Copyright (C) 2010 Samsung Electrnoics
  *  MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_MFD_MAX8997_PRIV_H

include/linux/mfd/max8997.h

@@ -1,23 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max8997.h - Driver for the Maxim 8997/8966
  *
  *  Copyright (C) 2009-2010 Samsung Electrnoics
  *  MyungJoo Ham <myungjoo.ham@samsung.com>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
  * This driver is based on max8998.h
  *
  * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices.
@@ -178,7 +165,6 @@ struct max8997_led_platform_data {
 struct max8997_platform_data {
 	/* IRQ */
 	int ono;
-	int wakeup;
 
 	/* ---- PMIC ---- */
 	struct max8997_regulator_data *regulators;

include/linux/mfd/max8998-private.h

@@ -1,23 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max8998-private.h - Voltage regulator driver for the Maxim 8998
  *
  *  Copyright (C) 2009-2010 Samsung Electrnoics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_MFD_MAX8998_PRIV_H

include/linux/mfd/max8998.h

@@ -1,23 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * max8998.h - Voltage regulator driver for the Maxim 8998
  *
  *  Copyright (C) 2009-2010 Samsung Electrnoics
  *  Kyungmin Park <kyungmin.park@samsung.com>
  *  Marek Szyprowski <m.szyprowski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #ifndef __LINUX_MFD_MAX8998_H

include/linux/mfd/mc13xxx.h

@@ -249,6 +249,7 @@ struct mc13xxx_platform_data {
 #define MC13XXX_ADC0_TSMOD0		(1 << 12)
 #define MC13XXX_ADC0_TSMOD1		(1 << 13)
 #define MC13XXX_ADC0_TSMOD2		(1 << 14)
+#define MC13XXX_ADC0_CHRGRAWDIV		(1 << 15)
 #define MC13XXX_ADC0_ADINC1		(1 << 16)
 #define MC13XXX_ADC0_ADINC2		(1 << 17)
 

include/linux/mfd/samsung/core.h

@@ -1,14 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * core.h
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd
- *
- * copyright (c) 2011 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __LINUX_MFD_SEC_CORE_H

include/linux/mfd/samsung/irq.h

@@ -1,13 +1,7 @@
-/* irq.h
+/* SPDX-License-Identifier: GPL-2.0+ */
- *
+/*
  * Copyright (c) 2012 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __LINUX_MFD_SEC_IRQ_H

include/linux/mfd/samsung/rtc.h

@@ -1,18 +1,7 @@
-/* rtc.h
+/* SPDX-License-Identifier: GPL-2.0+ */
- *
+/*
  * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __LINUX_MFD_SEC_RTC_H

include/linux/mfd/samsung/s2mpa01.h

@@ -1,12 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2013 Samsung Electronics Co., Ltd
  *		http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __LINUX_MFD_S2MPA01_H

include/linux/mfd/samsung/s2mps11.h

@@ -1,14 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * s2mps11.h
- *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __LINUX_MFD_S2MPS11_H

include/linux/mfd/samsung/s2mps13.h

@@ -1,19 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * s2mps13.h
- *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __LINUX_MFD_S2MPS13_H

include/linux/mfd/samsung/s2mps14.h

@@ -1,19 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * s2mps14.h
- *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __LINUX_MFD_S2MPS14_H

include/linux/mfd/samsung/s2mps15.h

@@ -1,16 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (c) 2015 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #ifndef __LINUX_MFD_S2MPS15_H

include/linux/mfd/samsung/s2mpu02.h

@@ -1,19 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * s2mpu02.h
- *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __LINUX_MFD_S2MPU02_H

include/linux/mfd/samsung/s5m8763.h

@@ -1,13 +1,7 @@
-/*  s5m8763.h
+/* SPDX-License-Identifier: GPL-2.0+ */
- *
+/*
  * Copyright (c) 2011 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __LINUX_MFD_S5M8763_H

include/linux/mfd/samsung/s5m8767.h

@@ -1,13 +1,7 @@
-/*  s5m8767.h
+/* SPDX-License-Identifier: GPL-2.0+ */
- *
+/*
  * Copyright (c) 2011 Samsung Electronics Co., Ltd
  *              http://www.samsung.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
  */
 
 #ifndef __LINUX_MFD_S5M8767_H

include/linux/mfd/ti-lmu.h

@@ -16,6 +16,7 @@
 #include <linux/gpio.h>
 #include <linux/notifier.h>
 #include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
 
 /* Notifier event */
 #define LMU_EVENT_MONITOR_DONE		0x01
@@ -81,7 +82,7 @@ enum lm363x_regulator_id {
 struct ti_lmu {
 	struct device *dev;
 	struct regmap *regmap;
-	int en_gpio;
+	struct gpio_desc *en_gpio;
 	struct blocking_notifier_head notifier;
 };
 #endif