Merge remote-tracking branches 'asoc/fix/davinci', 'asoc/fix/es8328', 'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus

This commit is contained in:
Mark Brown 2015-12-23 00:23:27 +00:00
8 changed files with 45 additions and 13 deletions

View File

@ -85,7 +85,15 @@ static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 300, 0);
static const DECLARE_TLV_DB_SCALE(bypass_tlv, -1500, 300, 0);
static const DECLARE_TLV_DB_SCALE(mic_tlv, 0, 300, 0);
static const int deemph_settings[] = { 0, 32000, 44100, 48000 };
static const struct {
int rate;
unsigned int val;
} deemph_settings[] = {
{ 0, ES8328_DACCONTROL6_DEEMPH_OFF },
{ 32000, ES8328_DACCONTROL6_DEEMPH_32k },
{ 44100, ES8328_DACCONTROL6_DEEMPH_44_1k },
{ 48000, ES8328_DACCONTROL6_DEEMPH_48k },
};
static int es8328_set_deemph(struct snd_soc_codec *codec)
{
@ -97,21 +105,22 @@ static int es8328_set_deemph(struct snd_soc_codec *codec)
* rate.
*/
if (es8328->deemph) {
best = 1;
for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
if (abs(deemph_settings[i] - es8328->playback_fs) <
abs(deemph_settings[best] - es8328->playback_fs))
best = 0;
for (i = 1; i < ARRAY_SIZE(deemph_settings); i++) {
if (abs(deemph_settings[i].rate - es8328->playback_fs) <
abs(deemph_settings[best].rate - es8328->playback_fs))
best = i;
}
val = best << 1;
val = deemph_settings[best].val;
} else {
val = 0;
val = ES8328_DACCONTROL6_DEEMPH_OFF;
}
dev_dbg(codec->dev, "Set deemphasis %d\n", val);
return snd_soc_update_bits(codec, ES8328_DACCONTROL6, 0x6, val);
return snd_soc_update_bits(codec, ES8328_DACCONTROL6,
ES8328_DACCONTROL6_DEEMPH_MASK, val);
}
static int es8328_get_deemph(struct snd_kcontrol *kcontrol,

View File

@ -153,6 +153,7 @@ int es8328_probe(struct device *dev, struct regmap *regmap);
#define ES8328_DACCONTROL6_CLICKFREE (1 << 3)
#define ES8328_DACCONTROL6_DAC_INVR (1 << 4)
#define ES8328_DACCONTROL6_DAC_INVL (1 << 5)
#define ES8328_DACCONTROL6_DEEMPH_MASK (3 << 6)
#define ES8328_DACCONTROL6_DEEMPH_OFF (0 << 6)
#define ES8328_DACCONTROL6_DEEMPH_32k (1 << 6)
#define ES8328_DACCONTROL6_DEEMPH_44_1k (2 << 6)

View File

@ -189,6 +189,7 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
case SND_SOC_DAPM_POST_PMU:
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
msleep(400);
break;
case SND_SOC_DAPM_PRE_PMD:

View File

@ -574,6 +574,7 @@ static const struct regmap_config wm8974_regmap = {
.max_register = WM8974_MONOMIX,
.reg_defaults = wm8974_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8974_reg_defaults),
.cache_type = REGCACHE_FLAT,
};
static int wm8974_probe(struct snd_soc_codec *codec)

View File

@ -223,8 +223,8 @@ static void mcasp_start_tx(struct davinci_mcasp *mcasp)
/* wait for XDATA to be cleared */
cnt = 0;
while (!(mcasp_get_reg(mcasp, DAVINCI_MCASP_TXSTAT_REG) &
~XRDATA) && (cnt < 100000))
while ((mcasp_get_reg(mcasp, DAVINCI_MCASP_TXSTAT_REG) & XRDATA) &&
(cnt < 100000))
cnt++;
/* Release TX state machine */

View File

@ -505,6 +505,24 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
regmap_update_bits(sai->regmap, FSL_SAI_RCSR,
FSL_SAI_CSR_FR, FSL_SAI_CSR_FR);
/*
* For sai master mode, after several open/close sai,
* there will be no frame clock, and can't recover
* anymore. Add software reset to fix this issue.
* This is a hardware bug, and will be fix in the
* next sai version.
*/
if (!sai->is_slave_mode) {
/* Software Reset for both Tx and Rx */
regmap_write(sai->regmap,
FSL_SAI_TCSR, FSL_SAI_CSR_SR);
regmap_write(sai->regmap,
FSL_SAI_RCSR, FSL_SAI_CSR_SR);
/* Clear SR bit to finish the reset */
regmap_write(sai->regmap, FSL_SAI_TCSR, 0);
regmap_write(sai->regmap, FSL_SAI_RCSR, 0);
}
}
break;
default:

View File

@ -152,8 +152,10 @@ static int rk_spdif_trigger(struct snd_pcm_substream *substream,
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
ret = regmap_update_bits(spdif->regmap, SPDIF_DMACR,
SPDIF_DMACR_TDE_ENABLE,
SPDIF_DMACR_TDE_ENABLE);
SPDIF_DMACR_TDE_ENABLE |
SPDIF_DMACR_TDL_MASK,
SPDIF_DMACR_TDE_ENABLE |
SPDIF_DMACR_TDL(16));
if (ret != 0)
return ret;

View File

@ -42,7 +42,7 @@
#define SPDIF_DMACR_TDL_SHIFT 0
#define SPDIF_DMACR_TDL(x) ((x) << SPDIF_DMACR_TDL_SHIFT)
#define SPDIF_DMACR_TDL_MASK (0x1f << SDPIF_DMACR_TDL_SHIFT)
#define SPDIF_DMACR_TDL_MASK (0x1f << SPDIF_DMACR_TDL_SHIFT)
/*
* XFER