Merge branch 'linus' into irq/numa

Conflicts:
	arch/mips/sibyte/bcm1480/irq.c
	arch/mips/sibyte/sb1250/irq.c

Merge reason: we gathered a few conflicts plus update to latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2009-06-01 21:06:21 +02:00
commit 3d58f48ba0
758 changed files with 19625 additions and 5339 deletions

View File

@ -0,0 +1,479 @@
What: /sys/kernel/slab
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The /sys/kernel/slab directory contains a snapshot of the
internal state of the SLUB allocator for each cache. Certain
files may be modified to change the behavior of the cache (and
any cache it aliases, if any).
Users: kernel memory tuning tools
What: /sys/kernel/slab/cache/aliases
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The aliases file is read-only and specifies how many caches
have merged into this cache.
What: /sys/kernel/slab/cache/align
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The align file is read-only and specifies the cache's object
alignment in bytes.
What: /sys/kernel/slab/cache/alloc_calls
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_calls file is read-only and lists the kernel code
locations from which allocations for this cache were performed.
The alloc_calls file only contains information if debugging is
enabled for that cache (see Documentation/vm/slub.txt).
What: /sys/kernel/slab/cache/alloc_fastpath
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_fastpath file is read-only and specifies how many
objects have been allocated using the fast path.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_from_partial
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_from_partial file is read-only and specifies how
many times a cpu slab has been full and it has been refilled
by using a slab from the list of partially used slabs.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_refill
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_refill file is read-only and specifies how many
times the per-cpu freelist was empty but there were objects
available as the result of remote cpu frees.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_slab
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_slab file is read-only and specifies how many times
a new slab had to be allocated from the page allocator.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_slowpath
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_slowpath file is read-only and specifies how many
objects have been allocated using the slow path because of a
refill or allocation from a partial or new slab.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/cache_dma
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The cache_dma file is read-only and specifies whether objects
are from ZONE_DMA.
Available when CONFIG_ZONE_DMA is enabled.
What: /sys/kernel/slab/cache/cpu_slabs
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The cpu_slabs file is read-only and displays how many cpu slabs
are active and their NUMA locality.
What: /sys/kernel/slab/cache/cpuslab_flush
Date: April 2009
KernelVersion: 2.6.31
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file cpuslab_flush is read-only and specifies how many
times a cache's cpu slabs have been flushed as the result of
destroying or shrinking a cache, a cpu going offline, or as
the result of forcing an allocation from a certain node.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/ctor
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The ctor file is read-only and specifies the cache's object
constructor function, which is invoked for each object when a
new slab is allocated.
What: /sys/kernel/slab/cache/deactivate_empty
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_empty is read-only and specifies how many
times an empty cpu slab was deactivated.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_full
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_full is read-only and specifies how many
times a full cpu slab was deactivated.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_remote_frees
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_remote_frees is read-only and specifies how
many times a cpu slab has been deactivated and contained free
objects that were freed remotely.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_to_head
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_to_head is read-only and specifies how
many times a partial cpu slab was deactivated and added to the
head of its node's partial list.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_to_tail
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_to_tail is read-only and specifies how
many times a partial cpu slab was deactivated and added to the
tail of its node's partial list.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/destroy_by_rcu
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The destroy_by_rcu file is read-only and specifies whether
slabs (not objects) are freed by rcu.
What: /sys/kernel/slab/cache/free_add_partial
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file free_add_partial is read-only and specifies how many
times an object has been freed in a full slab so that it had to
added to its node's partial list.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_calls
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_calls file is read-only and lists the locations of
object frees if slab debugging is enabled (see
Documentation/vm/slub.txt).
What: /sys/kernel/slab/cache/free_fastpath
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_fastpath file is read-only and specifies how many
objects have been freed using the fast path because it was an
object from the cpu slab.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_frozen
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_frozen file is read-only and specifies how many
objects have been freed to a frozen slab (i.e. a remote cpu
slab).
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_remove_partial
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file free_remove_partial is read-only and specifies how
many times an object has been freed to a now-empty slab so
that it had to be removed from its node's partial list.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_slab
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_slab file is read-only and specifies how many times an
empty slab has been freed back to the page allocator.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_slowpath
Date: February 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_slowpath file is read-only and specifies how many
objects have been freed using the slow path (i.e. to a full or
partial slab).
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/hwcache_align
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The hwcache_align file is read-only and specifies whether
objects are aligned on cachelines.
What: /sys/kernel/slab/cache/min_partial
Date: February 2009
KernelVersion: 2.6.30
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
David Rientjes <rientjes@google.com>
Description:
The min_partial file specifies how many empty slabs shall
remain on a node's partial list to avoid the overhead of
allocating new slabs. Such slabs may be reclaimed by utilizing
the shrink file.
What: /sys/kernel/slab/cache/object_size
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The object_size file is read-only and specifies the cache's
object size.
What: /sys/kernel/slab/cache/objects
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The objects file is read-only and displays how many objects are
active and from which nodes they are from.
What: /sys/kernel/slab/cache/objects_partial
Date: April 2008
KernelVersion: 2.6.26
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The objects_partial file is read-only and displays how many
objects are on partial slabs and from which nodes they are
from.
What: /sys/kernel/slab/cache/objs_per_slab
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file objs_per_slab is read-only and specifies how many
objects may be allocated from a single slab of the order
specified in /sys/kernel/slab/cache/order.
What: /sys/kernel/slab/cache/order
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The order file specifies the page order at which new slabs are
allocated. It is writable and can be changed to increase the
number of objects per slab. If a slab cannot be allocated
because of fragmentation, SLUB will retry with the minimum order
possible depending on its characteristics.
What: /sys/kernel/slab/cache/order_fallback
Date: April 2008
KernelVersion: 2.6.26
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file order_fallback is read-only and specifies how many
times an allocation of a new slab has not been possible at the
cache's order and instead fallen back to its minimum possible
order.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/partial
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The partial file is read-only and displays how long many
partial slabs there are and how long each node's list is.
What: /sys/kernel/slab/cache/poison
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The poison file specifies whether objects should be poisoned
when a new slab is allocated.
What: /sys/kernel/slab/cache/reclaim_account
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The reclaim_account file specifies whether the cache's objects
are reclaimable (and grouped by their mobility).
What: /sys/kernel/slab/cache/red_zone
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The red_zone file specifies whether the cache's objects are red
zoned.
What: /sys/kernel/slab/cache/remote_node_defrag_ratio
Date: January 2008
KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file remote_node_defrag_ratio specifies the percentage of
times SLUB will attempt to refill the cpu slab with a partial
slab from a remote node as opposed to allocating a new slab on
the local node. This reduces the amount of wasted memory over
the entire system but can be expensive.
Available when CONFIG_NUMA is enabled.
What: /sys/kernel/slab/cache/sanity_checks
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The sanity_checks file specifies whether expensive checks
should be performed on free and, at minimum, enables double free
checks. Caches that enable sanity_checks cannot be merged with
caches that do not.
What: /sys/kernel/slab/cache/shrink
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The shrink file is written when memory should be reclaimed from
a cache. Empty partial slabs are freed and the partial list is
sorted so the slabs with the fewest available objects are used
first.
What: /sys/kernel/slab/cache/slab_size
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The slab_size file is read-only and specifies the object size
with metadata (debugging information and alignment) in bytes.
What: /sys/kernel/slab/cache/slabs
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The slabs file is read-only and displays how long many slabs
there are (both cpu and partial) and from which nodes they are
from.
What: /sys/kernel/slab/cache/store_user
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The store_user file specifies whether the location of
allocation or free should be tracked for a cache.
What: /sys/kernel/slab/cache/total_objects
Date: April 2008
KernelVersion: 2.6.26
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The total_objects file is read-only and displays how many total
objects a cache has and from which nodes they are from.
What: /sys/kernel/slab/cache/trace
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The trace file specifies whether object allocations and frees
should be traced.
What: /sys/kernel/slab/cache/validate
Date: May 2007
KernelVersion: 2.6.22
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
Writing to the validate file causes SLUB to traverse all of its
cache's objects and check the validity of metadata.

View File

@ -281,7 +281,7 @@
seriously wrong while debugging, it will most often be the case
that you want to enable gdb to be verbose about its target
communications. You do this prior to issuing the <constant>target
remote</constant> command by typing in: <constant>set remote debug 1</constant>
remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
</chapter>
<chapter id="KGDBTestSuite">

View File

@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
Hugh Dickins <hugh@veritas.com>, 4 June 2007
Hugh Dickins, 4 June 2007

View File

@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value
Unit: revolution/min (RPM)
RW
fan[1-*]_max Fan maximum value
Unit: revolution/min (RPM)
Only rarely supported by the hardware.
RW
fan[1-*]_input Fan input value.
Unit: revolution/min (RPM)
RO
@ -390,6 +395,7 @@ OR
in[0-*]_min_alarm
in[0-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm

View File

@ -18,8 +18,12 @@ Usage
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
function, which generates a SYN_MT_REPORT event. The end of multi-touch
transfer is marked by calling the usual input_sync() function.
function, which generates a SYN_MT_REPORT event. This instructs the
receiver to accept the data for the current finger and prepare to receive
another. The end of a multi-touch transfer is marked by calling the usual
input_sync() function. This instructs the receiver to act upon events
accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
more granular information may specify general shapes as blobs, i.e., as a
sequence of rectangular shapes grouped together by an
ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
whether the touching tool is a finger or a pen or something else.
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
finger or a pen or something else. Devices with more granular information
may specify general shapes as blobs, i.e., as a sequence of rectangular
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
that currently support it, the ABS_MT_TRACKING_ID event may be used to
report finger tracking from hardware [5].
Here is what a minimal event sequence for a two-finger touch would look
like:
ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
ABS_MT_TOUCH_MAJOR
ABS_MT_POSITION_X
ABS_MT_POSITION_Y
SYN_MT_REPORT
SYN_REPORT
Event Semantics
@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
contact is circular, this event can be omitted.
contact is circular, this event can be omitted [4].
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
same.
same [4].
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
tool. Omit if circular.
tool. Omit if circular [4].
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@ -70,14 +89,17 @@ different characteristic widths [1].
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe half a revolution
clockwise around the touch center. The scale of the value is arbitrary, but
zero should be returned for an ellipse aligned along the Y axis of the
surface. As an example, an index finger placed straight onto the axis could
return zero orientation, something negative when twisted to the left, and
something positive when twisted to the right. This value can be omitted if
the touching object is circular, or if the information is not available in
the kernel driver.
The orientation of the ellipse. The value should describe a signed quarter
of a revolution clockwise around the touch center. The signed value range
is arbitrary, but zero should be returned for a finger aligned along the Y
axis of the surface, a negative value when finger is turned to the left, and
a positive value when finger turned to the right. When completely aligned with
the X axis, the range max should be returned. Orientation can be omitted
if the touching object is circular, or if the information is not available
in the kernel driver. Partial orientation support is possible if the device
can distinguish between the two axis, but not (uniquely) any values in
between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
[4].
ABS_MT_POSITION_X
@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
with the high-level contactID, explained below. Most kernel drivers will
not have this capability, and can safely omit the event.
with the high-level trackingID [5]. Most kernel drivers will not have blob
capability, and can safely omit the event.
ABS_MT_TRACKING_ID
The TRACKING_ID identifies an initiated contact throughout its life cycle
[5]. There are currently only a few devices that support it, so this event
should normally be omitted.
Event Computation
-----------------
The flora of different hardware unavoidably leads to some devices fitting
better to the MT protocol than others. To simplify and unify the mapping,
this section gives recipes for how to compute certain events.
For devices reporting contacts as rectangular shapes, signed orientation
cannot be obtained. Assuming X and Y are the lengths of the sides of the
touching rectangle, here is a simple formula that retains the most
information possible:
ABS_MT_TOUCH_MAJOR := max(X, Y)
ABS_MT_TOUCH_MINOR := min(X, Y)
ABS_MT_ORIENTATION := bool(X > Y)
The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
the device can distinguish between a finger along the Y axis (0) and a
finger along the X axis (1).
Finger Tracking
@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
The process of finger tracking, i.e., to assign a unique contactID to each
The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
multi-touch X driver [3]. In that driver, the contactID stays the same and
multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
There are a few devices that support trackingID in hardware. User space can
make use of these native identifiers to reduce bandwidth and cpu usage.
Notes
-----
@ -136,5 +189,7 @@ could be used to derive tilt.
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
functionality available in the synaptics X driver, and in addition
functionality available in the Synaptics X driver, and in addition
implement more advanced gestures.
[4] See the section on event computation.
[5] See the section on finger tracking.

View File

@ -1535,6 +1535,10 @@ and is between 256 and 4096 characters. It is defined in the file
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.

View File

@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
UNDOCUMENTED:
/proc/sys/net/core/*
dev_weight FIXME
dev_weight - INTEGER
The maximum number of packets that kernel can handle on a NAPI
interrupt, it's a Per-CPU variable.
Default: 64
/proc/sys/net/unix/*
max_dgram_qlen FIXME
max_dgram_qlen - INTEGER
The maximum length of dgram socket receive queue
Default: 10
UNDOCUMENTED:
/proc/sys/net/irda/*
fast_poll_increase FIXME

View File

@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
auto BIOS setup (default)

View File

@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
Since 2.6.30, this option also enables the hwptr check using
jiffies. This detects spontaneous invalid pointer callback
values, but can be lead to too much corrections for a (mostly
buggy) hardware that doesn't give smooth pointer updates.
card*/pcm*/sub*/info
The general information of this PCM sub-stream.

View File

@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
- nr_hugepages
- nr_overcommit_hugepages
- nr_pdflush_threads
- nr_pdflush_threads_min
- nr_pdflush_threads_max
- nr_trim_pages (only if CONFIG_MMU=n)
- numa_zonelist_order
- oom_dump_tasks
@ -469,32 +467,6 @@ The default value is 0.
==============================================================
nr_pdflush_threads_min
This value controls the minimum number of pdflush threads.
At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
threads for the kernel's lifetime.
The default value is 2. The minimum value you can specify is 1, and
the maximum value is the current setting of 'nr_pdflush_threads_max'.
See 'nr_pdflush_threads_max' below for more information.
==============================================================
nr_pdflush_threads_max
This value controls the maximum number of pdflush threads that can be
created. The pdflush algorithm will create a new pdflush thread (up to
this maximum) if no pdflush threads have been available for >= 1 second.
The default value is 8. The minimum value you can specify is the
current value of 'nr_pdflush_threads_min' and the
maximum is 1000.
==============================================================
overcommit_memory:
This value contains a flag that enables memory overcommitment.

View File

@ -113,7 +113,7 @@ versions of the sysfs interface.
"devices" directory at /sys/subsystem/<name>/devices.
If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
ignored. If it does not exist, you have always to scan all three
ignored. If it does not exist, you always have to scan all three
places, as the kernel is free to move a subsystem from one place to
the other, as long as the devices are still reachable by the same
subsystem name.

View File

@ -434,7 +434,7 @@ F: arch/alpha/
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
M: thomas.dahlmann@amd.com
M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
@ -624,6 +624,7 @@ M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
P: Russell King
@ -650,6 +651,7 @@ P: Paulius Zaleckas
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
P: Russell King
@ -1132,17 +1134,17 @@ F: fs/bfs/
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
P: Bryan Wu
M: cooloney@kernel.org
P: Mike Frysinger
M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
P: Bryan Wu
M: cooloney@kernel.org
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
P: Michael Hennerich
M: michael.hennerich@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
@ -1150,7 +1152,7 @@ F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
@ -1158,7 +1160,7 @@ F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
@ -1166,7 +1168,7 @@ F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
@ -1174,7 +1176,7 @@ F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
@ -1431,6 +1433,14 @@ P: Russell King
M: linux@arm.linux.org.uk
F: include/linux/clk.h
CISCO FCOE HBA DRIVER
P: Abhijeet Joglekar
M: abjoglek@cisco.com
P: Joe Eykholt
M: jeykholt@cisco.com
L: linux-scsi@vger.kernel.org
S: Supported
CODA FILE SYSTEM
P: Jan Harkes
M: jaharkes@cs.cmu.edu
@ -1532,6 +1542,13 @@ W: http://www.fi.muni.cz/~kas/cosa/
S: Maintained
F: drivers/net/wan/cosa*
CPMAC ETHERNET DRIVER
P: Florian Fainelli
M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/cpmac.c
CPU FREQUENCY DRIVERS
P: Dave Jones
M: davej@redhat.com
@ -1963,8 +1980,8 @@ F: include/linux/edac.h
EDAC-E752X
P: Mark Gross
P: Doug Thompson
M: mark.gross@intel.com
P: Doug Thompson
M: dougthompson@xmission.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
@ -2241,7 +2258,7 @@ P: Li Yang
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
L: linuxppc-embedded@ozlabs.org
L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
@ -5579,6 +5596,14 @@ M: ian@mnementh.co.uk
S: Maintained
F: drivers/mmc/host/tmio_mmc.*
TMPFS (SHMEM FILESYSTEM)
P: Hugh Dickins
M: hugh.dickins@tiscali.co.uk
L: linux-mm@kvack.org
S: Maintained
F: include/linux/shmem_fs.h
F: mm/shmem.c
TPM DEVICE DRIVER
P: Debora Velarde
M: debora@linux.vnet.ibm.com

View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
EXTRAVERSION = -rc5
NAME = Vindictive Armadillo
EXTRAVERSION = -rc7
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"

View File

@ -1,7 +1,9 @@
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
#include <linux/compiler.h>
#include <linux/threads.h>
#include <linux/percpu-defs.h>
/*
* Determine the real variable name from the name visible in the
@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#endif /* SMP */
#include <asm-generic/percpu.h>
#ifdef CONFIG_SMP
#define PER_CPU_BASE_SECTION ".data.percpu"
#else
#define PER_CPU_BASE_SECTION ".data"
#endif
#ifdef CONFIG_SMP
#ifdef MODULE
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
#endif
#define PER_CPU_FIRST_SECTION ".first"
#else
#define PER_CPU_SHARED_ALIGNED_SECTION ""
#define PER_CPU_FIRST_SECTION ""
#endif
#define PER_CPU_ATTRIBUTES
#endif /* __ALPHA_PERCPU_H */

View File

@ -273,6 +273,7 @@ config ARCH_EP93XX
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
help
This enables support for the Cirrus EP93xx series of CPUs.
@ -976,10 +977,9 @@ config OABI_COMPAT
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
config ARCH_FLATMEM_HAS_HOLES
config ARCH_HAS_HOLES_MEMORYMODEL
bool
default y
depends on FLATMEM
default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE

View File

@ -255,9 +255,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
}
#ifdef CONFIG_SMP
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
unsigned long map = *cpus_addr(cpumask);
unsigned long map = *cpus_addr(*mask);
/* this always happens on GIC0 */
writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);

View File

@ -114,3 +114,16 @@
.align 3; \
.long 9999b,9001f; \
.previous
/*
* SMP data memory barrier
*/
.macro smp_dmb
#ifdef CONFIG_SMP
#if __LINUX_ARM_ARCH__ >= 7
dmb
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
#endif
.endm

View File

@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
: "cc");
}
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long tmp;
int result;
__asm__ __volatile__("@ atomic_add\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "Ir" (i)
: "cc");
}
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
smp_mb();
__asm__ __volatile__("@ atomic_add_return\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
: "r" (&v->counter), "Ir" (i)
: "cc");
smp_mb();
return result;
}
static inline void atomic_sub(int i, atomic_t *v)
{
unsigned long tmp;
int result;
__asm__ __volatile__("@ atomic_sub\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
" strex %1, %0, [%2]\n"
" teq %1, #0\n"
" bne 1b"
: "=&r" (result), "=&r" (tmp)
: "r" (&v->counter), "Ir" (i)
: "cc");
}
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
smp_mb();
__asm__ __volatile__("@ atomic_sub_return\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
: "r" (&v->counter), "Ir" (i)
: "cc");
smp_mb();
return result;
}
@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
{
unsigned long oldval, res;
smp_mb();
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
: "cc");
} while (res);
smp_mb();
return oldval;
}
@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
return val;
}
#define atomic_add(i, v) (void) atomic_add_return(i, v)
static inline int atomic_sub_return(int i, atomic_t *v)
{
@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
return val;
}
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
#define atomic_add(i, v) (void) atomic_add_return(i, v)
#define atomic_inc(v) (void) atomic_add_return(1, v)
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
#define atomic_dec(v) (void) atomic_sub_return(1, v)
#define atomic_inc(v) atomic_add(1, v)
#define atomic_dec(v) atomic_sub(1, v)
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
/* Atomic operations are already serializing on ARM */
#define smp_mb__before_atomic_dec() barrier()
#define smp_mb__after_atomic_dec() barrier()
#define smp_mb__before_atomic_inc() barrier()
#define smp_mb__after_atomic_inc() barrier()
#define smp_mb__before_atomic_dec() smp_mb()
#define smp_mb__after_atomic_dec() smp_mb()
#define smp_mb__before_atomic_inc() smp_mb()
#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic.h>
#endif

View File

@ -5,9 +5,6 @@
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
/* An odd number of words will be pushed after this alignment, so
deliberately misalign the value. */
#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))

View File

@ -36,7 +36,7 @@
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
#endif
#endif

View File

@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
/*
* Raise an IPI cross call on CPUs in callmap.
*/
extern void smp_cross_call(cpumask_t callmap);
/*
* Broadcast a timer interrupt to the other CPUs.
*/
extern void smp_send_timer(void);
extern void smp_cross_call(const struct cpumask *mask);
/*
* Broadcast a clock event to other CPUs.
*/
extern void smp_timer_broadcast(cpumask_t mask);
extern void smp_timer_broadcast(const struct cpumask *mask);
/*
* Boot a secondary CPU, and assign it the specified idle task.
@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi(cpumask_t mask);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* Local timer interrupt handling function (can be IPI'ed).

View File

@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
unsigned int tmp;
#endif
smp_mb();
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
case 1:
@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
__bad_xchg(ptr, size), ret = 0;
break;
}
smp_mb();
return ret;
}
@ -316,6 +319,12 @@ extern void enable_hlt(void);
#include <asm-generic/cmpxchg-local.h>
#if __LINUX_ARM_ARCH__ < 6
#ifdef CONFIG_SMP
#error "SMP is not supported on this platform"
#endif
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
@ -329,6 +338,173 @@ extern void enable_hlt(void);
#include <asm-generic/cmpxchg.h>
#endif
#else /* __LINUX_ARM_ARCH__ >= 6 */
extern void __bad_cmpxchg(volatile void *ptr, int size);
/*
* cmpxchg only support 32-bits operands on ARMv6.
*/
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
unsigned long oldval, res;
switch (size) {
#ifdef CONFIG_CPU_32v6K
case 1:
do {
asm volatile("@ __cmpxchg1\n"
" ldrexb %1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" strexbeq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (old), "r" (new)
: "memory", "cc");
} while (res);
break;
case 2:
do {
asm volatile("@ __cmpxchg1\n"
" ldrexh %1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" strexheq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (old), "r" (new)
: "memory", "cc");
} while (res);
break;
#endif /* CONFIG_CPU_32v6K */
case 4:
do {
asm volatile("@ __cmpxchg4\n"
" ldrex %1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" strexeq %0, %4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (old), "r" (new)
: "memory", "cc");
} while (res);
break;
default:
__bad_cmpxchg(ptr, size);
oldval = 0;
}
return oldval;
}
static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
unsigned long ret;
smp_mb();
ret = __cmpxchg(ptr, old, new, size);
smp_mb();
return ret;
}
#define cmpxchg(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
static inline unsigned long __cmpxchg_local(volatile void *ptr,
unsigned long old,
unsigned long new, int size)
{
unsigned long ret;
switch (size) {
#ifndef CONFIG_CPU_32v6K
case 1:
case 2:
ret = __cmpxchg_local_generic(ptr, old, new, size);
break;
#endif /* !CONFIG_CPU_32v6K */
default:
ret = __cmpxchg(ptr, old, new, size);
}
return ret;
}
#define cmpxchg_local(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
(unsigned long)(o), \
(unsigned long)(n), \
sizeof(*(ptr))))
#ifdef CONFIG_CPU_32v6K
/*
* Note : ARMv7-M (currently unsupported by Linux) does not support
* ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
* not be allowed to use __cmpxchg64.
*/
static inline unsigned long long __cmpxchg64(volatile void *ptr,
unsigned long long old,
unsigned long long new)
{
register unsigned long long oldval asm("r0");
register unsigned long long __old asm("r2") = old;
register unsigned long long __new asm("r4") = new;
unsigned long res;
do {
asm volatile(
" @ __cmpxchg8\n"
" ldrexd %1, %H1, [%2]\n"
" mov %0, #0\n"
" teq %1, %3\n"
" teqeq %H1, %H3\n"
" strexdeq %0, %4, %H4, [%2]\n"
: "=&r" (res), "=&r" (oldval)
: "r" (ptr), "Ir" (__old), "r" (__new)
: "memory", "cc");
} while (res);
return oldval;
}
static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
unsigned long long old,
unsigned long long new)
{
unsigned long long ret;
smp_mb();
ret = __cmpxchg64(ptr, old, new);
smp_mb();
return ret;
}
#define cmpxchg64(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)))
#define cmpxchg64_local(ptr,o,n) \
((__typeof__(*(ptr)))__cmpxchg64((ptr), \
(unsigned long long)(o), \
(unsigned long long)(n)))
#else /* !CONFIG_CPU_32v6K */
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
#endif /* CONFIG_CPU_32v6K */
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)

View File

@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
/*
* If we have support for OABI programs, we can never allow NX
* support - our signal syscall restart mechanism relies upon
* being able to execute code placed on the user stack.
*/
return 1;
#else
return 0;
#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);

View File

@ -815,10 +815,7 @@ __kuser_helper_start:
*/
__kuser_memory_barrier: @ 0xffff0fa0
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
smp_dmb
usr_ret lr
.align 5

View File

@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
per_cpu(cpu_data, cpu).idle = current;
}
static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
{
unsigned long flags;
unsigned int cpu;
local_irq_save(flags);
for_each_cpu_mask(cpu, callmap) {
for_each_cpu(cpu, mask) {
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
spin_lock(&ipi->lock);
@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
/*
* Call the platform specific cross-CPU call function.
*/
smp_cross_call(callmap);
smp_cross_call(mask);
local_irq_restore(flags);
}
void arch_send_call_function_ipi(cpumask_t mask)
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_CALL_FUNC);
}
void arch_send_call_function_single_ipi(int cpu)
{
send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
}
void show_ipi_list(struct seq_file *p)
@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
void smp_send_reschedule(int cpu)
{
send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
void smp_send_timer(void)
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
send_ipi_message(mask, IPI_TIMER);
}
void smp_timer_broadcast(cpumask_t mask)
void smp_timer_broadcast(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_TIMER);
}
@ -517,7 +510,7 @@ void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
send_ipi_message(mask, IPI_CPU_STOP);
send_ipi_message(&mask, IPI_CPU_STOP);
}
/*
@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
}
static int
on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
static void
on_each_cpu_mask(void (*func)(void *), void *info, int wait,
const struct cpumask *mask)
{
int ret = 0;
preempt_disable();
ret = smp_call_function_mask(mask, func, info, wait);
if (cpu_isset(smp_processor_id(), mask))
smp_call_function_many(mask, func, info, wait);
if (cpumask_test_cpu(smp_processor_id(), mask))
func(info);
preempt_enable();
return ret;
}
/**********************************************************************/
@ -602,20 +592,17 @@ void flush_tlb_all(void)
void flush_tlb_mm(struct mm_struct *mm)
{
cpumask_t mask = mm->cpu_vm_mask;
on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
{
cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = uaddr;
on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_page(unsigned long kaddr)
@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = start;
ta.ta_end = end;
on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)

View File

@ -18,12 +18,14 @@
mov r2, #1
add r1, r1, r0, lsr #3 @ Get byte offset
mov r3, r2, lsl r3 @ create mask
smp_dmb
1: ldrexb r2, [r1]
ands r0, r2, r3 @ save old value of bit
\instr r2, r2, r3 @ toggle bit
strexb ip, r2, [r1]
cmp ip, #0
bne 1b
smp_dmb
cmp r0, #0
movne r0, #1
2: mov pc, lr

View File

@ -0,0 +1,25 @@
/*
* <mach/asp.h> - DaVinci Audio Serial Port support
*/
#ifndef __ASM_ARCH_DAVINCI_ASP_H
#define __ASM_ARCH_DAVINCI_ASP_H
#include <mach/irqs.h>
/* Bases of register banks */
#define DAVINCI_ASP0_BASE 0x01E02000
#define DAVINCI_ASP1_BASE 0x01E04000
/* EDMA channels */
#define DAVINCI_DMA_ASP0_TX 2
#define DAVINCI_DMA_ASP0_RX 3
#define DAVINCI_DMA_ASP1_TX 8
#define DAVINCI_DMA_ASP1_RX 9
/* Interrupts */
#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
#define DAVINCI_ASP0_TX_INT IRQ_MBXINT
#define DAVINCI_ASP1_RX_INT IRQ_MBRINT
#define DAVINCI_ASP1_TX_INT IRQ_MBXINT
#endif /* __ASM_ARCH_DAVINCI_ASP_H */

View File

@ -21,15 +21,50 @@
#include <asm/div64.h>
#include <mach/hardware.h>
/*
* The EP93xx has two external crystal oscillators. To generate the
* required high-frequency clocks, the processor uses two phase-locked-
* loops (PLLs) to multiply the incoming external clock signal to much
* higher frequencies that are then divided down by programmable dividers
* to produce the needed clocks. The PLLs operate independently of one
* another.
*/
#define EP93XX_EXT_CLK_RATE 14745600
#define EP93XX_EXT_RTC_RATE 32768
struct clk {
unsigned long rate;
int users;
int sw_locked;
u32 enable_reg;
u32 enable_mask;
unsigned long (*get_rate)(struct clk *clk);
};
static struct clk clk_uart = {
.rate = 14745600,
static unsigned long get_uart_rate(struct clk *clk);
static struct clk clk_uart1 = {
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
.get_rate = get_uart_rate,
};
static struct clk clk_pll1;
static struct clk clk_f;
@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
INIT_CK("apb:uart1", NULL, &clk_uart),
INIT_CK("apb:uart2", NULL, &clk_uart),
INIT_CK("apb:uart3", NULL, &clk_uart),
INIT_CK("apb:uart1", NULL, &clk_uart1),
INIT_CK("apb:uart2", NULL, &clk_uart2),
INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
if (clk->sw_locked)
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value | clk->enable_mask, clk->enable_reg);
}
@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
if (clk->sw_locked)
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
static unsigned long get_uart_rate(struct clk *clk)
{
u32 value;
value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
return EP93XX_EXT_CLK_RATE;
else
return EP93XX_EXT_CLK_RATE / 2;
}
unsigned long clk_get_rate(struct clk *clk)
{
if (clk->get_rate)
return clk->get_rate(clk);
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
unsigned long long rate;
int i;
rate = 14745600;
rate = EP93XX_EXT_CLK_RATE;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
clk_pll1.rate = 14745600;
clk_pll1.rate = EP93XX_EXT_CLK_RATE;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
clk_pll2.rate = 14745600;
clk_pll2.rate = EP93XX_EXT_CLK_RATE;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {

View File

@ -159,7 +159,10 @@
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)

View File

@ -15,10 +15,9 @@
/*
* Memory Map definitions
*/
/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
# define GEMINI_SRAM_BASE 0x20000000
# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000

View File

@ -121,7 +121,7 @@ static struct clk uartclk = {
.rate = 14745600,
};
static struct clk_lookup lookups[] __initdata = {
static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,

View File

@ -714,7 +714,7 @@ static int __init npe_init_module(void)
}
if (!found)
return -ENOSYS;
return -ENODEV;
return 0;
}

View File

@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = {
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = {
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@ -386,12 +392,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
static struct resource kirkwood_i2c_resources[] = {
{
.name = "i2c",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c",
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,

View File

@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_SATA1_ACTn,
MPP5_SATA0_ACTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_SATA1_PRESENTn,
MPP23_SATA0_PRESENTn,
0
};

View File

@ -18,7 +18,7 @@
/* IO_START and IO_BASE are defined in hardware.h */
#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */
#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
/* Define the interface to the SYS_CLOCK */

View File

@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)

View File

@ -3,6 +3,11 @@
#include <mach/mfp.h>
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
#define MFP_DRIVE_SLOW (0x1 << 13)
#define MFP_DRIVE_MEDIUM (0x2 << 13)
#define MFP_DRIVE_FAST (0x3 << 13)
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)

View File

@ -3,6 +3,11 @@
#include <mach/mfp.h>
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
#define MFP_DRIVE_SLOW (0x2 << 13)
#define MFP_DRIVE_MEDIUM (0x4 << 13)
#define MFP_DRIVE_FAST (0x8 << 13)
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)

View File

@ -12,16 +12,13 @@
* possible, we make the following compromise:
*
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
* 2. DRIVE strength definitions redefined to include the reserved bit10
* 2. DRIVE strength definitions redefined to include the reserved bit
* - the reserved bit differs between pxa168 and pxa910, and the
* MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
* 3. Override MFP_CFG() and MFP_CFG_DRV()
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
*/
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
#define MFP_DRIVE_SLOW (0x2 << 13)
#define MFP_DRIVE_MEDIUM (0x4 << 13)
#define MFP_DRIVE_FAST (0x8 << 13)
#undef MFP_CFG
#undef MFP_CFG_DRV
#undef MFP_CFG_LPM

View File

@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
.set_mode = timer_set_mode,
};
static cycle_t clksrc_read(void)
static cycle_t clksrc_read(struct clocksource *cs)
{
return timer_read();
}

View File

@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
static struct resource mv78xx0_i2c_0_resources[] = {
{
.name = "i2c 0 base",
.start = I2C_0_PHYS_BASE,
.end = I2C_0_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c 0 irq",
.start = IRQ_MV78XX0_I2C_0,
.end = IRQ_MV78XX0_I2C_0,
.flags = IORESOURCE_IRQ,
@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
static struct resource mv78xx0_i2c_1_resources[] = {
{
.name = "i2c 1 base",
.start = I2C_1_PHYS_BASE,
.end = I2C_1_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c 1 irq",
.start = IRQ_MV78XX0_I2C_1,
.end = IRQ_MV78XX0_I2C_1,
.flags = IORESOURCE_IRQ,

View File

@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X),
CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),

View File

@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
CLK(NULL, "dss_ick", &dss_ick, CK_343X),
CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
CLK("omapfb", "ick", &dss_ick, CK_343X),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),

View File

@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
.ops = &clkops_omap2_dflt_wait,
.ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,

View File

@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
platform_device_register(&omap2_mcspi3);
if (cpu_is_omap2430() || cpu_is_omap343x())
platform_device_register(&omap2_mcspi3);
#endif
#ifdef CONFIG_ARCH_OMAP3
platform_device_register(&omap2_mcspi4);
if (cpu_is_omap343x())
platform_device_register(&omap2_mcspi4);
#endif
}

View File

@ -409,7 +409,7 @@
/* PM_PREPWSTST_CAM specific bits */
/* PM_PWSTCTRL_USBHOST specific bits */
#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4)
#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4
/* RM_RSTST_PER specific bits */

View File

@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
unsigned sysclk_ps;
int status;
if (!refclk_psec || sysclk_ps == 0)
if (!refclk_psec || fclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;

View File

@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
static struct resource orion5x_i2c_resources[] = {
{
.name = "i2c base",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.name = "i2c irq",
.start = IRQ_ORION5X_I2C,
.end = IRQ_ORION5X_I2C,
.flags = IORESOURCE_IRQ,

View File

@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
GPIO1_GPIO, /* pcap interrupt */
GPIO4_GPIO, /* WDI_AP */
GPIO55_GPIO, /* SYS_RESTART */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO12_GPIO,
GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
GPIO57_GPIO, /* AP_RDY */
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
GPIO82_GPIO, /* RESET */
GPIO99_GPIO, /* TC_MM_EN */
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO15_GPIO,
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
GPIO10_GPIO,
GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
GPIO96_GPIO, /* AP_RDY */
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
GPIO116_GPIO, /* RESET */
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */

View File

@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
/**
* init_gpio_reset() - register GPIO as reset generator
* @gpio: gpio nr
* @output: set gpio as out/low instead of input during normal work
* @output: set gpio as output instead of input during normal work
* @level: output level
*/
extern int init_gpio_reset(int gpio, int output);
extern int init_gpio_reset(int gpio, int output, int level);
#endif /* __ASM_ARCH_RESET_H */

View File

@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
}
@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
return 0;
@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
if (cpu_is_pxa27x())
pxa27x_mfp_init();
/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
PSSR = PSSR_RDH;
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);

View File

@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO108_GPIO, /* ir disable */

View File

@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */

View File

@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */

View File

@ -20,7 +20,7 @@ static void do_hw_reset(void);
static int reset_gpio = -1;
int init_gpio_reset(int gpio, int output)
int init_gpio_reset(int gpio, int output, int level)
{
int rc;
@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
}
if (output)
rc = gpio_direction_output(gpio, 0);
rc = gpio_direction_output(gpio, level);
else
rc = gpio_direction_input(gpio);
if (rc) {

View File

@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
static void spitz_ohci_exit(struct device *dev)
{
gpio_free(SPITZ_GPIO_USB_HOST);
}
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
.exit = spitz_ohci_exit,
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
static void __init common_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;

View File

@ -897,7 +897,7 @@ static void __init tosa_init(void)
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;

View File

@ -46,6 +46,7 @@
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
#include <mach/regs-uart.h>
#include <mach/viper.h>
#include <asm/setup.h>

View File

@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
{
u32 val;
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
/*
* The dummy clock device has to be registered before the main device
* so that the latter will broadcast the clock events
*/
local_timer_setup();
#endif
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz

View File

@ -15,16 +15,9 @@
/*
* We use IRQ1 as the IPI
*/
static inline void smp_cross_call(cpumask_t callmap)
{
gic_raise_softirq(callmap, 1);
}
/*
* Do nothing on MPcore.
*/
static inline void smp_cross_call_done(cpumask_t callmap)
static inline void smp_cross_call(const struct cpumask *mask)
{
gic_raise_softirq(mask, 1);
}
#endif

View File

@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
clk->name = "dummy_timer";
clk->features = CLOCK_EVT_FEAT_DUMMY;
clk->rating = 200;
clk->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
clk->rating = 400;
clk->mult = 1;
clk->set_mode = dummy_timer_set_mode;
clk->broadcast = smp_timer_broadcast;

View File

@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
{
trace_hardirqs_off();
/*
* the primary core may have used a "cross call" soft interrupt
* to get this processor out of WFI in the BootMonitor - make
* sure that we are no longer being sent this soft interrupt
*/
smp_cross_call_done(cpumask_of_cpu(cpu));
/*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Use smp_cross_call() for this, since there's little
* point duplicating the code here
*/
smp_cross_call(cpumask_of_cpu(cpu));
smp_cross_call(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (max_cpus > ncores)
max_cpus = ncores;
#ifdef CONFIG_LOCAL_TIMERS
#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
/*
* Enable the local timer for primary CPU. If the device is
* dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
* realview_timer_init
* Enable the local timer or broadcast device for the boot CPU.
*/
local_timer_setup();
#endif

View File

@ -588,8 +588,6 @@ static void __init bast_map_io(void)
s3c_device_nand.dev.platform_data = &bast_nand_info;
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
@ -602,6 +600,7 @@ static void __init bast_init(void)
sysdev_class_register(&bast_pm_sysclass);
sysdev_register(&bast_pm_sysdev);
s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));

View File

@ -413,7 +413,7 @@ static struct clk ref24_clk = {
.rate = 24000000,
};
static struct clk_lookup lookups[] __initdata = {
static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "dev:f1",
.clk = &ref24_clk,

View File

@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
extern unsigned int DoubleCPDO(struct roundingData *roundData,
const unsigned int opcode, FPREG * rFd);
/* extneded_cpdo.c */
extern unsigned int ExtendedCPDO(struct roundingData *roundData,
const unsigned int opcode, FPREG * rFd);
#endif

View File

@ -27,10 +27,6 @@
#include "fpmodule.inl"
#include "softfloat.h"
#ifdef CONFIG_FPE_NWFPE_XP
extern flag floatx80_is_nan(floatx80);
#endif
unsigned int PerformFLT(const unsigned int opcode);
unsigned int PerformFIX(const unsigned int opcode);

View File

@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
char floatx80_lt_quiet( floatx80, floatx80 );
char floatx80_is_signaling_nan( floatx80 );
extern flag floatx80_is_nan(floatx80);
#endif
static inline flag extractFloat32Sign(float32 a)

View File

@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
config_invalid = 1;
return;
}
if (rg.paddr)
if (rg.paddr) {
reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
reserved += rg.size;
reserved += rg.size;
}
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}

View File

@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
if (cpu_is_omap34xx() && gpio < 160)
if (cpu_is_omap34xx() && gpio < 192)
return 0;
return -1;
}

View File

@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
int s3c24xx_register_clock(struct clk *clk)
{
clk->owner = THIS_MODULE;
if (clk->enable == NULL)
clk->enable = clk_null_enable;

View File

@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
EXPORT_SYMBOL(s3c2410_dma_getposition);
static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
{
return container_of(dev, struct s3c2410_dma_chan, dev);
}

View File

@ -57,7 +57,7 @@
#if 1
#define gpio_dbg(x...) do { } while(0)
#else
#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif
/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where

View File

@ -61,14 +61,14 @@
#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32)
#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32)
#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32)
#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32)
#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32)
#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36)
#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36)
#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36)
#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36)
#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)

View File

@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Mon Mar 23 20:09:01 2009
# Last update: Fri May 29 10:14:20 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
palmt650 MACH_PALMT650 PALMT650 909
treo650 MACH_TREO650 TREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226
vpac270 MACH_VPAC270 VPAC270 1227
rd129 MACH_RD129 RD129 1228
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
treo680 MACH_TREO680 TREO680 1230
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
treo700p MACH_TREO700P TREO700P 1421
treo700w MACH_TREO700W TREO700W 1422
treo750 MACH_TREO750 TREO750 1423
treo755p MACH_TREO755P TREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729
csb637xo MACH_CSB637XO CSB637XO 1730
evisiong MACH_EVISIONG EVISIONG 1731
stmp37xx MACH_STMP37XX STMP37XX 1732
stmp378x MACH_STMP38XX STMP38XX 1733
stmp378x MACH_STMP378X STMP378X 1733
tnt MACH_TNT TNT 1734
tbxt MACH_TBXT TBXT 1735
playmate MACH_PLAYMATE PLAYMATE 1736
@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826
tavorevb MACH_TAVOREVB TAVOREVB 1827
saar MACH_SAAR SAAR 1828
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
adx_rmu MACH_ADX_RMU ADX_RMU 1833
@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
spc300 MACH_SPC300 SPC300 2143
eko MACH_EKO EKO 2144
ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
str9104nas MACH_STAR9104NAS STAR9104NAS 2148
pca100 MACH_PCA100 PCA100 2149
z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
hipox MACH_HIPOX HIPOX 2151
omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
bm150r MACH_BM150R BM150R 2153
tbone MACH_TBONE TBONE 2154
merlin MACH_MERLIN MERLIN 2155
falcon MACH_FALCON FALCON 2156
davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
s5p6440 MACH_S5P6440 S5P6440 2158
at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
lpc313x MACH_LPC313X LPC313X 2161
magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
meesc MACH_MEESC MEESC 2165
otc570 MACH_OTC570 OTC570 2166
bcu2412 MACH_BCU2412 BCU2412 2167
beacon MACH_BEACON BEACON 2168
actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
e4430 MACH_E4430 E4430 2170
ql300 MACH_QL300 QL300 2171
btmavb101 MACH_BTMAVB101 BTMAVB101 2172
btmawb101 MACH_BTMAWB101 BTMAWB101 2173
sq201 MACH_SQ201 SQ201 2174
quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
openpad MACH_OPENPAD OPENPAD 2176
tx25 MACH_TX25 TX25 2177
omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
lal43 MACH_LAL43 LAL43 2181
htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
anw6410 MACH_ANW6410 ANW6410 2183
htcprophet MACH_HTCPROPHET HTCPROPHET 2185
cfa_10022 MACH_CFA_10022 CFA_10022 2186
imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
px2imx27 MACH_PX2IMX27 PX2IMX27 2188
stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
dvs10 MACH_DVS10 DVS10 2190
portuxg20 MACH_PORTUXG20 PORTUXG20 2191
arm_spv MACH_ARM_SPV ARM_SPV 2192
smdkc110 MACH_SMDKC110 SMDKC110 2193
cabespresso MACH_CABESPRESSO CABESPRESSO 2194
hmc800 MACH_HMC800 HMC800 2195
sholes MACH_SHOLES SHOLES 2196
btmxc31 MACH_BTMXC31 BTMXC31 2197
dt501 MACH_DT501 DT501 2198
ktx MACH_KTX KTX 2199
omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
endb2443 MACH_ENDB2443 ENDB2443 2207
inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
tros MACH_TROS TROS 2209
pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
ofsp8 MACH_OFSP8 OFSP8 2211
at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
eab1r MACH_EAB1R EAB1R 2214
desirec MACH_DESIREC DESIREC 2215
cordoba MACH_CORDOBA CORDOBA 2216
irvine MACH_IRVINE IRVINE 2217
sff772 MACH_SFF772 SFF772 2218
pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
pc7302 MACH_PC7302 PC7302 2220
bip6000 MACH_BIP6000 BIP6000 2221
silvermoon MACH_SILVERMOON SILVERMOON 2222
vc0830 MACH_VC0830 VC0830 2223
dt430 MACH_DT430 DT430 2224
ji42pf MACH_JI42PF JI42PF 2225
gnet_ksm MACH_GNET_KSM GNET_KSM 2226
gnet_sgm MACH_GNET_SGM GNET_SGM 2227
gnet_sgr MACH_GNET_SGR GNET_SGR 2228
omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
pnp MACH_PNP PNP 2230
ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
sas_c MACH_SAS_C SAS_C 2233
vma2315 MACH_VMA2315 VMA2315 2234
vcs MACH_VCS VCS 2235
spear600 MACH_SPEAR600 SPEAR600 2236
spear300 MACH_SPEAR300 SPEAR300 2237
spear1300 MACH_SPEAR1300 SPEAR1300 2238
lilly1131 MACH_LILLY1131 LILLY1131 2239
arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
mapphone MACH_MAPPHONE MAPPHONE 2241
legend MACH_LEGEND LEGEND 2242
salsa MACH_SALSA SALSA 2243
lounge MACH_LOUNGE LOUNGE 2244
vision MACH_VISION VISION 2245
vmb20 MACH_VMB20 VMB20 2246
hy2410 MACH_HY2410 HY2410 2247
hy9315 MACH_HY9315 HY9315 2248
bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
vs_v210 MACH_VS_V210 VS_V210 2252
vs_v212 MACH_VS_V212 VS_V212 2253
hmt MACH_HMT HMT 2254
suen3 MACH_SUEN3 SUEN3 2255
vesper MACH_VESPER VESPER 2256
str9 MACH_STR9 STR9 2257
omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
simcom MACH_SIMCOM SIMCOM 2259
mcwebio MACH_MCWEBIO MCWEBIO 2260

View File

@ -1 +0,0 @@
+mach

View File

@ -10,7 +10,6 @@
#include <asm/unaligned.h>
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)

View File

@ -378,8 +378,10 @@
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
#define __NR_preadv 366
#define __NR_pwritev 367
#define __NR_syscall 366
#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */

1
arch/blackfin/kernel/.gitignore vendored Normal file
View File

@ -0,0 +1 @@
vmlinux.lds

View File

@ -8,9 +8,8 @@
#define strncmp __inline_strncmp
#include <asm/string.h>
#undef strncmp
#include <linux/module.h>
#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{

View File

@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
.long _sys_preadv
.long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall

View File

@ -70,7 +70,7 @@ SRC_ARCH = $(srctree)/arch/cris
# cris object files path
OBJ_ARCH = $(objtree)/arch/cris
boot := arch/cris/$(SARCH)/boot
boot := arch/cris/boot
MACHINE := arch/cris/$(SARCH)
all: zImage
@ -81,15 +81,15 @@ zImage Image: vmlinux
archprepare:
archclean:
$(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
$(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
$(Q)if [ -e arch/cris/boot ]; then \
$(MAKE) $(clean)=arch/cris/boot; \
fi
CLEAN_FILES += \
$(MACHINE)/boot/zImage \
$(MACHINE)/boot/compressed/decompress.bin \
$(MACHINE)/boot/compressed/piggy.gz \
$(MACHINE)/boot/rescue/rescue.bin
$(boot)/zImage \
$(boot)/compressed/decompress.bin \
$(boot)/compressed/piggy.gz \
$(boot)/rescue/rescue.bin
# MRPROPER_FILES +=

View File

@ -1,25 +0,0 @@
Creation of the self-extracting compressed kernel image (vmlinuz)
-----------------------------------------------------------------
$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
This can be slightly confusing because it's a process with many steps.
The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
by that makefile into text and data binary files, vmlinux.text and
vmlinux.data.
Those files together with a ROM filesystem can be catted together and
burned into a flash or executed directly at the DRAM origin.
They can also be catted together and compressed with gzip, which is what
happens in this makefile. Together they make up piggy.img.
The decompressor is built into the file decompress.o. It is turned into
the binary file decompress.bin, which is catted together with piggy.img
into the file vmlinuz. It can be executed in an arbitrary place in flash.
Be careful - it assumes some things about free locations in DRAM. It
assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
so it puts its code at 0x40700000, and initial stack at 0x40800000.
-Bjorn

View File

@ -1,246 +0,0 @@
/*
* misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* adaptation for Linux/CRIS Axis Communications AB, 1999
*
*/
/* where the piggybacked kernel image expects itself to live.
* it is the same address we use when we network load an uncompressed
* image into DRAM, and it is the address the kernel is linked to live
* at by vmlinux.lds.S
*/
#define KERNEL_LOAD_ADR 0x40004000
#include <linux/types.h>
#include <arch/svinto.h>
/*
* gzip declarations
*/
#define OF(args) args
#define STATIC static
void *memset(void *s, int c, size_t n);
void *memcpy(void *__dest, __const void *__src, size_t __n);
#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
typedef unsigned long ulg;
#define WSIZE 0x8000 /* Window size must be at least 32k, */
/* and a power of two */
static uch *inbuf; /* input buffer */
static uch window[WSIZE]; /* Sliding window buffer */
unsigned inptr = 0; /* index of next byte to be processed in inbuf
* After decompression it will contain the
* compressed size, and head.S will read it.
*/
static unsigned outcnt = 0; /* bytes in output buffer */
/* gzip flag byte */
#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
#define COMMENT 0x10 /* bit 4 set: file comment present */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond, msg) do { \
if (!(cond)) \
error(msg); \
} while (0)
# define Trace(x) fprintf x
# define Tracev(x) do { \
if (verbose) \
fprintf x; \
} while (0)
# define Tracevv(x) do { \
if (verbose > 1) \
fprintf x; \
} while (0)
# define Tracec(c, x) do { \
if (verbose && (c)) \
fprintf x; \
} while (0)
# define Tracecv(c, x) do { \
if (verbose > 1 && (c)) \
fprintf x; \
} while (0)
#else
# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c, x)
# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
extern char *input_data; /* lives in head.S */
static long bytes_out = 0;
static uch *output_data;
static unsigned long output_ptr = 0;
static void puts(const char *);
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
static long free_mem_ptr = (long)&_end;
static long free_mem_end_ptr;
#include "../../../../../lib/inflate.c"
/* decompressor info and error messages to serial console */
static void
puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
*R_SERIAL0_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
*R_SERIAL1_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
*R_SERIAL2_TR_DATA = *s++;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
*R_SERIAL3_TR_DATA = *s++;
#endif
}
#endif
}
void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char *)s;
for (i = 0; i < n; i++)
ss[i] = c;
return s;
}
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i = 0; i < __n; i++)
d[i] = s[i];
return __dest;
}
/* ===========================================================================
* Write the output window window[0..outcnt-1] and update crc and bytes_out.
* (Used for the decompressed data only.)
*/
static void flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out = *in;
out++;
in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void error(char *x)
{
puts("\n\n");
puts(x);
puts("\n\n -- System halted\n");
while (1); /* Halt */
}
void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
void decompress_kernel(void)
{
char revision;
/* input_data is set in head.S */
inbuf = input_data;
#ifdef CONFIG_ETRAX_DEBUG_PORT0
*R_SERIAL0_XOFF = 0;
*R_SERIAL0_BAUD = 0x99;
*R_SERIAL0_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
*R_SERIAL1_XOFF = 0;
*R_SERIAL1_BAUD = 0x99;
*R_SERIAL1_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
*R_GEN_CONFIG = 0x08;
*R_SERIAL2_XOFF = 0;
*R_SERIAL2_BAUD = 0x99;
*R_SERIAL2_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
*R_GEN_CONFIG = 0x100;
*R_SERIAL3_XOFF = 0;
*R_SERIAL3_BAUD = 0x99;
*R_SERIAL3_TR_CTRL = 0x40;
#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < 10) {
puts("You need an ETRAX 100LX to run linux 2.6\n");
while (1);
}
puts("Uncompressing Linux...\n");
gunzip();
puts("Done. Now booting the kernel.\n");
}

View File

@ -536,10 +536,10 @@ multiple_interrupt:
movem $r13, [$sp]
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
move.d $sp, $r10
jsr do_multiple_IRQ
jump ret_from_intr
do_sigtrap:
@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
pop $r0 ; Restore r0.
ba do_sigtrap ; SIGTRAP the offending process.
pop $dccr ; Restore dccr in delay slot.
.global kernel_execve
kernel_execve:
move.d __NR_execve, $r9
@ -929,6 +929,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
.long sys_signalfd4
.long sys_eventfd2
.long sys_epoll_create1
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have

View File

@ -1,20 +0,0 @@
#
# arch/cris/arch-v32/boot/Makefile
#
OBJCOPYFLAGS = -O binary -R .note -R .comment
subdir- := compressed rescue
targets := Image
$(obj)/Image: vmlinux FORCE
$(call if_changed,objcopy)
@echo ' Kernel: $@ is ready'
$(obj)/compressed/vmlinux: $(obj)/Image FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
$(obj)/zImage: $(obj)/compressed/vmlinux
@cp $< $@
@echo ' Kernel: $@ is ready'

View File

@ -1,26 +0,0 @@
#
# arch/cris/arch-v32/boot/compressed/Makefile
#
asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
ldflags-y += -T$(srctree)/$(src)/decompress.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
targets := vmlinux piggy.gz decompress.o decompress.bin
$(obj)/decompress.o: $(OBJECTS) FORCE
$(call if_changed,ld)
$(obj)/decompress.bin: $(obj)/decompress.o FORCE
$(call if_changed,objcopy)
$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(call if_changed,image)
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)

View File

@ -1,26 +0,0 @@
#
# Makefile for rescue (bootstrap) code
#
CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
-I $(srctree)/include/asm/arch
asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
LD = gcc-cris -mlinux -march=v32 -nostdlib
ldflags-y += -T $(srctree)/$(src)/rescue.lds
LDPOSTFLAGS = -lgcc
OBJCOPYFLAGS = -O binary --remove-section=.bss
obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
OBJECT := $(obj)/head.o
targets := rescue.o rescue.bin
quiet_cmd_ldlibgcc = LD $@
cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
$(obj)/rescue.o: $(OBJECTS) FORCE
$(call if_changed,ldlibgcc)
$(obj)/rescue.bin: $(obj)/rescue.o FORCE
$(call if_changed,objcopy)
cp -p $(obj)/rescue.bin $(objtree)

View File

@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
spin_lock_irqrestore(&gpio_lock, flags);
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
spin_lock_irqrestore(&gpio_lock, flags);
spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */

View File

@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \
process.o ptrace.o setup.o signal.o traps.o time.o \
cache.o cacheflush.o
obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o

View File

@ -852,6 +852,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
.long sys_signalfd4
.long sys_eventfd2
.long sys_epoll_create1
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
.long sys_preadv
.long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have

View File

@ -1,8 +1,12 @@
#
# arch/cris/arch-v10/boot/Makefile
# arch/cris/boot/Makefile
#
OBJCOPYFLAGS = -O binary --remove-section=.bss
objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
OBJCOPYFLAGS = -O binary $(objcopyflags-y)
subdir- := compressed rescue
targets := Image

View File

@ -1,11 +1,23 @@
#
# arch/cris/arch-v10/boot/compressed/Makefile
# arch/cris/boot/compressed/Makefile
#
asflags-y += $(LINUXINCLUDE)
ccflags-y += -O2 $(LINUXINCLUDE)
ldflags-y += -T $(srctree)/$(src)/decompress.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
# -I$(srctree)/include/asm/arch
# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
# -I$(srctree)/include/asm/arch
arch-$(CONFIG_ETRAX_ARCH_V10) = v10
arch-$(CONFIG_ETRAX_ARCH_V32) = v32
ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
OBJECTS= $(OBJECTS-y) $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)

View File

@ -30,7 +30,7 @@
beq dram_init_finished
nop
#include "../../lib/dram_init.S"
#include "../../arch-v10/lib/dram_init.S"
dram_init_finished:
@ -123,4 +123,4 @@ _cmd_line_magic:
.dword 0
_cmd_line_addr:
.dword 0
#include "../../lib/hw_settings.S"
#include "../../arch-v10/lib/hw_settings.S"

View File

@ -17,7 +17,7 @@
.globl input_data
.text
_start:
start:
di
;; Start clocks for used blocks.
@ -29,9 +29,9 @@ _start:
nop
#if defined CONFIG_ETRAXFS
#include "../../mach-fs/dram_init.S"
#include "../../arch-v32/mach-fs/dram_init.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
#include "../../mach-a3/dram_init.S"
#include "../../arch-v32/mach-a3/dram_init.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
@ -137,9 +137,9 @@ _boot_source:
.dword 0
#if defined CONFIG_ETRAXFS
#include "../../mach-fs/hw_settings.S"
#include "../../arch-v32/mach-fs/hw_settings.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
#include "../../mach-a3/hw_settings.S"
#include "../../arch-v32/mach-a3/hw_settings.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif

View File

@ -18,8 +18,9 @@
#define KERNEL_LOAD_ADR 0x40004000
#include <linux/types.h>
#ifdef CONFIG_ETRAX_ARCH_V32
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
@ -27,6 +28,9 @@
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#include <hwregs/clkgen_defs.h>
#endif
#else
#include <arch/svinto.h>
#endif
/*
* gzip declarations
@ -35,12 +39,10 @@
#define OF(args) args
#define STATIC static
void* memset(void* s, int c, size_t n);
void* memcpy(void* __dest, __const void* __src,
size_t __n);
#define memzero(s, n) memset ((s), 0, (n))
void *memset(void *s, int c, size_t n);
void *memcpy(void *__dest, __const void *__src, size_t __n);
#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
@ -68,27 +70,43 @@ static unsigned outcnt = 0; /* bytes in output buffer */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
#define get_byte() inbuf[inptr++]
#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
# define Assert(cond,msg) {if(!(cond)) error(msg);}
# define Assert(cond, msg) do { \
if (!(cond)) \
error(msg); \
} while (0)
# define Trace(x) fprintf x
# define Tracev(x) {if (verbose) fprintf x ;}
# define Tracevv(x) {if (verbose>1) fprintf x ;}
# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
# define Tracev(x) do { \
if (verbose) \
fprintf x; \
} while (0)
# define Tracevv(x) do { \
if (verbose > 1) \
fprintf x; \
} while (0)
# define Tracec(c, x) do { \
if (verbose && (c)) \
fprintf x; \
} while (0)
# define Tracecv(c, x) do { \
if (verbose > 1 && (c)) \
fprintf x; \
} while (0)
#else
# define Assert(cond,msg)
# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
# define Tracec(c,x)
# define Tracecv(c,x)
# define Tracec(c, x)
# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
static void puts(const char *);
extern char *input_data; /* lives in head.S */
@ -96,10 +114,6 @@ static long bytes_out;
static uch *output_data;
static unsigned long output_ptr;
static void error(char *m);
static void puts(const char *);
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
@ -110,8 +124,8 @@ static long free_mem_end_ptr;
/* decompressor info and error messages to serial console */
static inline void
serout(const char *s, reg_scope_instances regi_ser)
#ifdef CONFIG_ETRAX_ARCH_V32
static inline void serout(const char *s, reg_scope_instances regi_ser)
{
reg_ser_rs_stat_din rs;
reg_ser_rw_dout dout = {.data = *s};
@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_dout, dout);
}
#endif
static void
puts(const char *s)
static void puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser0);
#else
while (!(*R_SERIAL0_STATUS & (1 << 5)))
;
*R_SERIAL0_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser1);
#else
while (!(*R_SERIAL1_STATUS & (1 << 5)))
;
*R_SERIAL1_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser2);
#else
while (!(*R_SERIAL2_STATUS & (1 << 5)))
;
*R_SERIAL2_TR_DATA = *s++;
#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser3);
#else
while (!(*R_SERIAL3_STATUS & (1 << 5)))
;
*R_SERIAL3_TR_DATA = *s++;
#endif
#endif
*s++;
}
@ -147,8 +185,7 @@ puts(const char *s)
#endif
}
void*
memset(void* s, int c, size_t n)
void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char*)s;
@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
return s;
}
void*
memcpy(void* __dest, __const void* __src,
size_t __n)
void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
for (i=0;i<__n;i++) d[i] = s[i];
for (i = 0; i < __n; i++)
d[i] = s[i];
return __dest;
}
@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
* (Used for the decompressed data only.)
*/
static void
flush_window()
static void flush_window(void)
{
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
ulg c = crc; /* temporary variable */
unsigned n;
uch *in, *out, ch;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out++ = *in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
in = window;
out = &output_data[output_ptr];
for (n = 0; n < outcnt; n++) {
ch = *out = *in;
out++;
in++;
c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
}
crc = c;
bytes_out += (ulg)outcnt;
output_ptr += (ulg)outcnt;
outcnt = 0;
}
static void
error(char *x)
static void error(char *x)
{
puts("\r\n\n");
puts("\n\n");
puts(x);
puts("\r\n\n -- System halted\n");
puts("\n\n -- System halted\n");
while(1); /* Halt */
}
void
setup_normal_output_buffer(void)
void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
static inline void
serial_setup(reg_scope_instances regi_ser)
#ifdef CONFIG_ETRAX_ARCH_V32
static inline void serial_setup(reg_scope_instances regi_ser)
{
reg_ser_rw_xoff xoff;
reg_ser_rw_tr_ctrl tr_ctrl;
@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
}
#endif
void
decompress_kernel(void)
void decompress_kernel(void)
{
char revision;
char compile_rev;
#ifdef CONFIG_ETRAX_ARCH_V32
/* Need at least a CRISv32 to run. */
compile_rev = 32;
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
@ -277,6 +316,7 @@ decompress_kernel(void)
hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT0
serial_setup(regi_ser0);
#endif
@ -300,19 +340,52 @@ decompress_kernel(void)
/* input_data is set in head.S */
inbuf = input_data;
#else /* CRISv10 */
/* Need at least a crisv10 to run. */
compile_rev = 10;
/* input_data is set in head.S */
inbuf = input_data;
#ifdef CONFIG_ETRAX_DEBUG_PORT0
*R_SERIAL0_XOFF = 0;
*R_SERIAL0_BAUD = 0x99;
*R_SERIAL0_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
*R_SERIAL1_XOFF = 0;
*R_SERIAL1_BAUD = 0x99;
*R_SERIAL1_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
*R_GEN_CONFIG = 0x08;
*R_SERIAL2_XOFF = 0;
*R_SERIAL2_BAUD = 0x99;
*R_SERIAL2_TR_CTRL = 0x40;
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
*R_GEN_CONFIG = 0x100;
*R_SERIAL3_XOFF = 0;
*R_SERIAL3_BAUD = 0x99;
*R_SERIAL3_TR_CTRL = 0x40;
#endif
#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
if (revision < 32)
{
puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
if (revision < compile_rev) {
#ifdef CONFIG_ETRAX_ARCH_V32
puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
#else
puts("You need an ETRAX 100LX to run linux 2.6\n");
#endif
while(1);
}
puts("Uncompressing Linux...\r\n");
puts("Uncompressing Linux...\n");
gunzip();
puts("Done. Now booting the kernel.\r\n");
puts("Done. Now booting the kernel\n");
}

View File

@ -2,16 +2,26 @@
# Makefile for rescue (bootstrap) code
#
ccflags-y += -O2 $(LINUXINCLUDE)
# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
# -I$(srctree)/include/asm/arch
# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
# LD = gcc-cris -mlinux -march=v32 -nostdlib
asflags-y += $(LINUXINCLUDE)
ldflags-y += -T $(srctree)/$(src)/rescue.lds
ccflags-y += -O2 $(LINUXINCLUDE)
arch-$(CONFIG_ETRAX_ARCH_V10) = v10
arch-$(CONFIG_ETRAX_ARCH_V32) = v32
ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
OBJCOPYFLAGS = -O binary --remove-section=.bss
obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
OBJECT := $(obj)/head.o
obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
OBJECTS := $(obj-y)
targets := rescue.o rescue.bin
$(obj)/rescue.o: $(OBJECT) FORCE
$(obj)/rescue.o: $(OBJECTS) FORCE
$(call if_changed,ld)
$(obj)/rescue.bin: $(obj)/rescue.o FORCE
@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
rm tr.bin tmp2423 testrescue_tmp.bin
$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
# Pad it to 784 bytes, that's what the rescue loader expects
@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
cat ktr.bin tmp2423 >kimagerescue_tmp.bin
dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
rm ktr.bin tmp2423 kimagerescue_tmp.bin

Some files were not shown because too many files have changed in this diff Show More