cs5530/sc1200: add ->speedproc support
* add {cs5530,sc1200}_tunepio() for programming PIO timings * add {cs5530,sc1200}_tune_chipset() (->speedproc method) for setting transfer mode and convert {cs5530,sc1200}_config_dma() to use it * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
a01ba4011a
commit
3c3f5d2c9f
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/drivers/ide/pci/cs5530.c Version 0.72 Mar 10 2007
|
||||
* linux/drivers/ide/pci/cs5530.c Version 0.73 Mar 10 2007
|
||||
*
|
||||
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
|
||||
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
|
||||
|
@ -62,6 +62,14 @@ static unsigned int cs5530_pio_timings[2][5] = {
|
|||
#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
|
||||
#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
|
||||
|
||||
static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
|
||||
{
|
||||
unsigned long basereg = CS5530_BASEREG(drive->hwif);
|
||||
unsigned int format = (inl(basereg + 4) >> 31) & 1;
|
||||
|
||||
outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
|
||||
}
|
||||
|
||||
/**
|
||||
* cs5530_tuneproc - select/set PIO modes
|
||||
*
|
||||
|
@ -74,17 +82,10 @@ static unsigned int cs5530_pio_timings[2][5] = {
|
|||
|
||||
static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
|
||||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
unsigned int format;
|
||||
unsigned long basereg = CS5530_BASEREG(hwif);
|
||||
static u8 modes[5] = { XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
|
||||
|
||||
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
|
||||
if (!cs5530_set_xfer_mode(drive, modes[pio])) {
|
||||
format = (inl(basereg + 4) >> 31) & 1;
|
||||
outl(cs5530_pio_timings[format][pio],
|
||||
basereg+(drive->select.b.unit<<3));
|
||||
}
|
||||
|
||||
if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
|
||||
cs5530_tunepio(drive, pio);
|
||||
}
|
||||
|
||||
/**
|
||||
|
@ -136,18 +137,27 @@ out:
|
|||
|
||||
static int cs5530_config_dma(ide_drive_t *drive)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
unsigned int reg, timings = 0;
|
||||
unsigned long basereg;
|
||||
u8 unit = drive->dn & 1, mode = 0;
|
||||
if (ide_use_dma(drive)) {
|
||||
u8 mode = ide_max_dma_mode(drive);
|
||||
|
||||
if (ide_use_dma(drive))
|
||||
mode = ide_max_dma_mode(drive);
|
||||
if (mode && drive->hwif->speedproc(drive, mode) == 0)
|
||||
return 0;
|
||||
}
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
|
||||
{
|
||||
unsigned long basereg;
|
||||
unsigned int reg, timings = 0;
|
||||
|
||||
mode = ide_rate_filter(drive, mode);
|
||||
|
||||
/*
|
||||
* Tell the drive to switch to the new mode; abort on failure.
|
||||
*/
|
||||
if (!mode || cs5530_set_xfer_mode(drive, mode))
|
||||
if (cs5530_set_xfer_mode(drive, mode))
|
||||
return 1; /* failure */
|
||||
|
||||
/*
|
||||
|
@ -160,14 +170,21 @@ static int cs5530_config_dma(ide_drive_t *drive)
|
|||
case XFER_MW_DMA_0: timings = 0x00077771; break;
|
||||
case XFER_MW_DMA_1: timings = 0x00012121; break;
|
||||
case XFER_MW_DMA_2: timings = 0x00002020; break;
|
||||
case XFER_PIO_4:
|
||||
case XFER_PIO_3:
|
||||
case XFER_PIO_2:
|
||||
case XFER_PIO_1:
|
||||
case XFER_PIO_0:
|
||||
cs5530_tunepio(drive, mode - XFER_PIO_0);
|
||||
return 0;
|
||||
default:
|
||||
BUG();
|
||||
break;
|
||||
}
|
||||
basereg = CS5530_BASEREG(hwif);
|
||||
basereg = CS5530_BASEREG(drive->hwif);
|
||||
reg = inl(basereg + 4); /* get drive0 config register */
|
||||
timings |= reg & 0x80000000; /* preserve PIO format bit */
|
||||
if (unit == 0) { /* are we configuring drive0? */
|
||||
if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
|
||||
outl(timings, basereg + 4); /* write drive0 config register */
|
||||
} else {
|
||||
if (timings & 0x00100000)
|
||||
|
@ -293,6 +310,8 @@ static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
|
|||
hwif->serialized = hwif->mate->serialized = 1;
|
||||
|
||||
hwif->tuneproc = &cs5530_tuneproc;
|
||||
hwif->speedproc = &cs5530_tune_chipset;
|
||||
|
||||
basereg = CS5530_BASEREG(hwif);
|
||||
d0_timings = inl(basereg + 0);
|
||||
if (CS5530_BAD_PIO(d0_timings)) {
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/drivers/ide/pci/sc1200.c Version 0.93 Mar 10 2007
|
||||
* linux/drivers/ide/pci/sc1200.c Version 0.94 Mar 10 2007
|
||||
*
|
||||
* Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
|
||||
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
|
||||
|
@ -95,6 +95,20 @@ static const unsigned int sc1200_pio_timings[4][5] =
|
|||
*/
|
||||
//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
|
||||
|
||||
static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
|
||||
{
|
||||
ide_hwif_t *hwif = drive->hwif;
|
||||
struct pci_dev *pdev = hwif->pci_dev;
|
||||
unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
|
||||
|
||||
pci_read_config_dword(pdev, basereg + 4, &format);
|
||||
format = (format >> 31) & 1;
|
||||
if (format)
|
||||
format += sc1200_get_pci_clock();
|
||||
pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
|
||||
sc1200_pio_timings[format][pio]);
|
||||
}
|
||||
|
||||
/*
|
||||
* The SC1200 specifies that two drives sharing a cable cannot mix
|
||||
* UDMA/MDMA. It has to be one or the other, for the pair, though
|
||||
|
@ -124,11 +138,7 @@ out:
|
|||
return mask;
|
||||
}
|
||||
|
||||
/*
|
||||
* sc1200_config_dma2() handles selection/setting of DMA/UDMA modes
|
||||
* for both the chipset and drive.
|
||||
*/
|
||||
static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
|
||||
static int sc1200_tune_chipset(ide_drive_t *drive, u8 mode)
|
||||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
int unit = drive->select.b.unit;
|
||||
|
@ -136,14 +146,26 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
|
|||
unsigned short pci_clock;
|
||||
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
|
||||
|
||||
mode = ide_rate_filter(drive, mode);
|
||||
|
||||
/*
|
||||
* Tell the drive to switch to the new mode; abort on failure.
|
||||
*/
|
||||
if (!mode || sc1200_set_xfer_mode(drive, mode)) {
|
||||
if (sc1200_set_xfer_mode(drive, mode)) {
|
||||
printk("SC1200: set xfer mode failure\n");
|
||||
return 1; /* failure */
|
||||
}
|
||||
|
||||
switch (mode) {
|
||||
case XFER_PIO_4:
|
||||
case XFER_PIO_3:
|
||||
case XFER_PIO_2:
|
||||
case XFER_PIO_1:
|
||||
case XFER_PIO_0:
|
||||
sc1200_tunepio(drive, mode - XFER_PIO_0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
pci_clock = sc1200_get_pci_clock();
|
||||
|
||||
/*
|
||||
|
@ -196,11 +218,9 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
|
|||
case PCI_CLK_66: timings = 0x00015151; break;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
if (timings == 0) {
|
||||
printk("%s: sc1200_config_dma: huh? mode=%02x clk=%x \n", drive->name, mode, pci_clock);
|
||||
return 1; /* failure */
|
||||
default:
|
||||
BUG();
|
||||
break;
|
||||
}
|
||||
|
||||
if (unit == 0) { /* are we configuring drive0? */
|
||||
|
@ -220,12 +240,14 @@ static int sc1200_config_dma2 (ide_drive_t *drive, int mode)
|
|||
*/
|
||||
static int sc1200_config_dma (ide_drive_t *drive)
|
||||
{
|
||||
u8 mode = 0;
|
||||
if (ide_use_dma(drive)) {
|
||||
u8 mode = ide_max_dma_mode(drive);
|
||||
|
||||
if (ide_use_dma(drive))
|
||||
mode = ide_max_dma_mode(drive);
|
||||
if (mode && drive->hwif->speedproc(drive, mode) == 0)
|
||||
return 0;
|
||||
}
|
||||
|
||||
return sc1200_config_dma2(drive, mode);
|
||||
return 1;
|
||||
}
|
||||
|
||||
|
||||
|
@ -265,8 +287,6 @@ static int sc1200_ide_dma_end (ide_drive_t *drive)
|
|||
static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "autotune" */
|
||||
{
|
||||
ide_hwif_t *hwif = HWIF(drive);
|
||||
unsigned int format;
|
||||
static byte modes[5] = {XFER_PIO_0, XFER_PIO_1, XFER_PIO_2, XFER_PIO_3, XFER_PIO_4};
|
||||
int mode = -1;
|
||||
|
||||
/*
|
||||
|
@ -283,21 +303,16 @@ static void sc1200_tuneproc (ide_drive_t *drive, byte pio) /* mode=255 means "au
|
|||
if (mode != -1) {
|
||||
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
|
||||
hwif->dma_off_quietly(drive);
|
||||
if (sc1200_config_dma2(drive, mode) == 0)
|
||||
if (sc1200_tune_chipset(drive, mode) == 0)
|
||||
hwif->dma_host_on(drive);
|
||||
return;
|
||||
}
|
||||
|
||||
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
|
||||
printk("SC1200: %s: setting PIO mode%d\n", drive->name, pio);
|
||||
if (!sc1200_set_xfer_mode(drive, modes[pio])) {
|
||||
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
|
||||
pci_read_config_dword (hwif->pci_dev, basereg+4, &format);
|
||||
format = (format >> 31) & 1;
|
||||
if (format)
|
||||
format += sc1200_get_pci_clock();
|
||||
pci_write_config_dword(hwif->pci_dev, basereg + (drive->select.b.unit << 3), sc1200_pio_timings[format][pio]);
|
||||
}
|
||||
|
||||
if (sc1200_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
|
||||
sc1200_tunepio(drive, pio);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
@ -447,6 +462,7 @@ static void __devinit init_hwif_sc1200 (ide_hwif_t *hwif)
|
|||
if (!noautodma)
|
||||
hwif->autodma = 1;
|
||||
hwif->tuneproc = &sc1200_tuneproc;
|
||||
hwif->speedproc = &sc1200_tune_chipset;
|
||||
}
|
||||
hwif->atapi_dma = 1;
|
||||
hwif->ultra_mask = 0x07;
|
||||
|
|
Loading…
Reference in New Issue