From 3bdf878102110c916dd6a9fb0df9ecfde93a3c83 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Date: Mon, 12 May 2014 20:26:21 +0530 Subject: [PATCH] pwm: samsung: do not set manual update bit in pwm_samsung_config pwm_samsung_config() sets the manual update bit via a call to the pwm_samsung_enable() function even when the channel is already running. This causes noticable flicker on display if we try to change the backlight brightness from minimum to maximum, continuously. So, we remove the call to pwm_samsung_enable() from pwm_samsung_config to avoid the flicker and this change doesn't harm normal working since the pwm-backlight driver already calls pwm_samsung_enable() where needed. Signed-off-by: Ajay Kumar Reviewed-by: Tomasz Figa Signed-off-by: Thierry Reding --- drivers/pwm/pwm-samsung.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c index d66529a995a1..ba6b650cf8dc 100644 --- a/drivers/pwm/pwm-samsung.c +++ b/drivers/pwm/pwm-samsung.c @@ -335,9 +335,6 @@ static int pwm_samsung_config(struct pwm_chip *chip, struct pwm_device *pwm, writel(tcnt, our_chip->base + REG_TCNTB(pwm->hwpwm)); writel(tcmp, our_chip->base + REG_TCMPB(pwm->hwpwm)); - if (test_bit(PWMF_ENABLED, &pwm->flags)) - pwm_samsung_enable(chip, pwm); - chan->period_ns = period_ns; chan->tin_ns = tin_ns; chan->duty_ns = duty_ns;