hwmon: Add Gateworks System Controller support
The Gateworks System Controller has a hwmon sub-component that exposes up to 16 ADC's, some of which are temperature sensors, others which are voltage inputs. The ADC configuration (register mapping and name) is configured via device-tree and varies board to board. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Tim Harvey
Lee Jones
parent
d85234994b
commit
3bce5377ef
|
|
@ -0,0 +1,53 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
Kernel driver gsc-hwmon
|
||||
=======================
|
||||
|
||||
Supported chips: Gateworks GSC
|
||||
Datasheet: http://trac.gateworks.com/wiki/gsc
|
||||
Author: Tim Harvey <tharvey@gateworks.com>
|
||||
|
||||
Description:
|
||||
------------
|
||||
|
||||
This driver supports hardware monitoring for the temperature sensor,
|
||||
various ADC's connected to the GSC, and optional FAN controller available
|
||||
on some boards.
|
||||
|
||||
|
||||
Voltage Monitoring
|
||||
------------------
|
||||
|
||||
The voltage inputs are scaled either internally or by the driver depending
|
||||
on the GSC version and firmware. The values returned by the driver do not need
|
||||
further scaling. The voltage input labels provide the voltage rail name:
|
||||
|
||||
inX_input Measured voltage (mV).
|
||||
inX_label Name of voltage rail.
|
||||
|
||||
|
||||
Temperature Monitoring
|
||||
----------------------
|
||||
|
||||
Temperatures are measured with 12-bit or 10-bit resolution and are scaled
|
||||
either internally or by the driver depending on the GSC version and firmware.
|
||||
The values returned by the driver reflect millidegree Celcius:
|
||||
|
||||
tempX_input Measured temperature.
|
||||
tempX_label Name of temperature input.
|
||||
|
||||
|
||||
PWM Output Control
|
||||
------------------
|
||||
|
||||
The GSC features 1 PWM output that operates in automatic mode where the
|
||||
PWM value will be scalled depending on 6 temperature boundaries.
|
||||
The tempeature boundaries are read-write and in millidegree Celcius and the
|
||||
read-only PWM values range from 0 (off) to 255 (full speed).
|
||||
Fan speed will be set to minimum (off) when the temperature sensor reads
|
||||
less than pwm1_auto_point1_temp and maximum when the temperature sensor
|
||||
equals or exceeds pwm1_auto_point6_temp.
|
||||
|
||||
pwm1_auto_point[1-6]_pwm PWM value.
|
||||
pwm1_auto_point[1-6]_temp Temperature boundary.
|
||||
|
||||
|
|
@ -60,6 +60,7 @@ Hardware Monitoring Kernel Drivers
|
|||
ftsteutates
|
||||
g760a
|
||||
g762
|
||||
gsc-hwmon
|
||||
gl518sm
|
||||
hih6130
|
||||
ibmaem
|
||||
|
|
|
|||
|
|
@ -7035,6 +7035,9 @@ S: Maintained
|
|||
F: Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
|
||||
F: drivers/mfd/gateworks-gsc.c
|
||||
F: include/linux/mfd/gsc.h
|
||||
F: Documentation/hwmon/gsc-hwmon.rst
|
||||
F: drivers/hwmon/gsc-hwmon.c
|
||||
F: include/linux/platform_data/gsc_hwmon.h
|
||||
|
||||
GASKET DRIVER FRAMEWORK
|
||||
M: Rob Springer <rspringer@google.com>
|
||||
|
|
|
|||
|
|
@ -523,6 +523,15 @@ config SENSORS_F75375S
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called f75375s.
|
||||
|
||||
config SENSORS_GSC
|
||||
tristate "Gateworks System Controller ADC"
|
||||
depends on MFD_GATEWORKS_GSC
|
||||
help
|
||||
Support for the Gateworks System Controller A/D converters.
|
||||
|
||||
To compile this driver as a module, choose M here:
|
||||
the module will be called gsc-hwmon.
|
||||
|
||||
config SENSORS_MC13783_ADC
|
||||
tristate "Freescale MC13783/MC13892 ADC"
|
||||
depends on MFD_MC13XXX
|
||||
|
|
|
|||
|
|
@ -74,6 +74,7 @@ obj-$(CONFIG_SENSORS_G760A) += g760a.o
|
|||
obj-$(CONFIG_SENSORS_G762) += g762.o
|
||||
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
|
||||
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
|
||||
obj-$(CONFIG_SENSORS_GSC) += gsc-hwmon.o
|
||||
obj-$(CONFIG_SENSORS_GPIO_FAN) += gpio-fan.o
|
||||
obj-$(CONFIG_SENSORS_HIH6130) += hih6130.o
|
||||
obj-$(CONFIG_SENSORS_ULTRA45) += ultra45_env.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,390 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Driver for Gateworks System Controller Hardware Monitor module
|
||||
*
|
||||
* Copyright (C) 2020 Gateworks Corporation
|
||||
*/
|
||||
#include <linux/hwmon.h>
|
||||
#include <linux/hwmon-sysfs.h>
|
||||
#include <linux/mfd/gsc.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <linux/platform_data/gsc_hwmon.h>
|
||||
|
||||
#define GSC_HWMON_MAX_TEMP_CH 16
|
||||
#define GSC_HWMON_MAX_IN_CH 16
|
||||
|
||||
#define GSC_HWMON_RESOLUTION 12
|
||||
#define GSC_HWMON_VREF 2500
|
||||
|
||||
struct gsc_hwmon_data {
|
||||
struct gsc_dev *gsc;
|
||||
struct gsc_hwmon_platform_data *pdata;
|
||||
struct regmap *regmap;
|
||||
const struct gsc_hwmon_channel *temp_ch[GSC_HWMON_MAX_TEMP_CH];
|
||||
const struct gsc_hwmon_channel *in_ch[GSC_HWMON_MAX_IN_CH];
|
||||
u32 temp_config[GSC_HWMON_MAX_TEMP_CH + 1];
|
||||
u32 in_config[GSC_HWMON_MAX_IN_CH + 1];
|
||||
struct hwmon_channel_info temp_info;
|
||||
struct hwmon_channel_info in_info;
|
||||
const struct hwmon_channel_info *info[3];
|
||||
struct hwmon_chip_info chip;
|
||||
};
|
||||
|
||||
static struct regmap_bus gsc_hwmon_regmap_bus = {
|
||||
.reg_read = gsc_read,
|
||||
.reg_write = gsc_write,
|
||||
};
|
||||
|
||||
static const struct regmap_config gsc_hwmon_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.cache_type = REGCACHE_NONE,
|
||||
};
|
||||
|
||||
static ssize_t pwm_auto_point_temp_show(struct device *dev,
|
||||
struct device_attribute *devattr,
|
||||
char *buf)
|
||||
{
|
||||
struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
|
||||
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
||||
u8 reg = hwmon->pdata->fan_base + (2 * attr->index);
|
||||
u8 regs[2];
|
||||
int ret;
|
||||
|
||||
ret = regmap_bulk_read(hwmon->regmap, reg, regs, 2);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regs[0] | regs[1] << 8;
|
||||
return sprintf(buf, "%d\n", ret * 10);
|
||||
}
|
||||
|
||||
static ssize_t pwm_auto_point_temp_store(struct device *dev,
|
||||
struct device_attribute *devattr,
|
||||
const char *buf, size_t count)
|
||||
{
|
||||
struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
|
||||
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
||||
u8 reg = hwmon->pdata->fan_base + (2 * attr->index);
|
||||
u8 regs[2];
|
||||
long temp;
|
||||
int err;
|
||||
|
||||
if (kstrtol(buf, 10, &temp))
|
||||
return -EINVAL;
|
||||
|
||||
temp = clamp_val(temp, 0, 10000);
|
||||
temp = DIV_ROUND_CLOSEST(temp, 10);
|
||||
|
||||
regs[0] = temp & 0xff;
|
||||
regs[1] = (temp >> 8) & 0xff;
|
||||
err = regmap_bulk_write(hwmon->regmap, reg, regs, 2);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
static ssize_t pwm_auto_point_pwm_show(struct device *dev,
|
||||
struct device_attribute *devattr,
|
||||
char *buf)
|
||||
{
|
||||
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
||||
|
||||
return sprintf(buf, "%d\n", 255 * (50 + (attr->index * 10)) / 100);
|
||||
}
|
||||
|
||||
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point1_pwm, pwm_auto_point_pwm, 0);
|
||||
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, pwm_auto_point_temp, 0);
|
||||
|
||||
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point2_pwm, pwm_auto_point_pwm, 1);
|
||||
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, pwm_auto_point_temp, 1);
|
||||
|
||||
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point3_pwm, pwm_auto_point_pwm, 2);
|
||||
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, pwm_auto_point_temp, 2);
|
||||
|
||||
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point4_pwm, pwm_auto_point_pwm, 3);
|
||||
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, pwm_auto_point_temp, 3);
|
||||
|
||||
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point5_pwm, pwm_auto_point_pwm, 4);
|
||||
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point5_temp, pwm_auto_point_temp, 4);
|
||||
|
||||
static SENSOR_DEVICE_ATTR_RO(pwm1_auto_point6_pwm, pwm_auto_point_pwm, 5);
|
||||
static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point6_temp, pwm_auto_point_temp, 5);
|
||||
|
||||
static struct attribute *gsc_hwmon_attributes[] = {
|
||||
&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point3_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point4_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point5_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point5_temp.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point6_pwm.dev_attr.attr,
|
||||
&sensor_dev_attr_pwm1_auto_point6_temp.dev_attr.attr,
|
||||
NULL
|
||||
};
|
||||
|
||||
static const struct attribute_group gsc_hwmon_group = {
|
||||
.attrs = gsc_hwmon_attributes,
|
||||
};
|
||||
__ATTRIBUTE_GROUPS(gsc_hwmon);
|
||||
|
||||
static int
|
||||
gsc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
|
||||
int channel, long *val)
|
||||
{
|
||||
struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
|
||||
const struct gsc_hwmon_channel *ch;
|
||||
int sz, ret;
|
||||
long tmp;
|
||||
u8 buf[3];
|
||||
|
||||
switch (type) {
|
||||
case hwmon_in:
|
||||
ch = hwmon->in_ch[channel];
|
||||
break;
|
||||
case hwmon_temp:
|
||||
ch = hwmon->temp_ch[channel];
|
||||
break;
|
||||
default:
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
sz = (ch->mode == mode_voltage) ? 3 : 2;
|
||||
ret = regmap_bulk_read(hwmon->regmap, ch->reg, buf, sz);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
tmp = 0;
|
||||
while (sz-- > 0)
|
||||
tmp |= (buf[sz] << (8 * sz));
|
||||
|
||||
switch (ch->mode) {
|
||||
case mode_temperature:
|
||||
if (tmp > 0x8000)
|
||||
tmp -= 0xffff;
|
||||
break;
|
||||
case mode_voltage_raw:
|
||||
tmp = clamp_val(tmp, 0, BIT(GSC_HWMON_RESOLUTION));
|
||||
/* scale based on ref voltage and ADC resolution */
|
||||
tmp *= GSC_HWMON_VREF;
|
||||
tmp >>= GSC_HWMON_RESOLUTION;
|
||||
/* scale based on optional voltage divider */
|
||||
if (ch->vdiv[0] && ch->vdiv[1]) {
|
||||
tmp *= (ch->vdiv[0] + ch->vdiv[1]);
|
||||
tmp /= ch->vdiv[1];
|
||||
}
|
||||
/* adjust by uV offset */
|
||||
tmp += ch->mvoffset;
|
||||
break;
|
||||
case mode_voltage:
|
||||
/* no adjustment needed */
|
||||
break;
|
||||
}
|
||||
|
||||
*val = tmp;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
gsc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
|
||||
u32 attr, int channel, const char **buf)
|
||||
{
|
||||
struct gsc_hwmon_data *hwmon = dev_get_drvdata(dev);
|
||||
|
||||
switch (type) {
|
||||
case hwmon_in:
|
||||
*buf = hwmon->in_ch[channel]->name;
|
||||
break;
|
||||
case hwmon_temp:
|
||||
*buf = hwmon->temp_ch[channel]->name;
|
||||
break;
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static umode_t
|
||||
gsc_hwmon_is_visible(const void *_data, enum hwmon_sensor_types type, u32 attr,
|
||||
int ch)
|
||||
{
|
||||
return 0444;
|
||||
}
|
||||
|
||||
static const struct hwmon_ops gsc_hwmon_ops = {
|
||||
.is_visible = gsc_hwmon_is_visible,
|
||||
.read = gsc_hwmon_read,
|
||||
.read_string = gsc_hwmon_read_string,
|
||||
};
|
||||
|
||||
static struct gsc_hwmon_platform_data *
|
||||
gsc_hwmon_get_devtree_pdata(struct device *dev)
|
||||
{
|
||||
struct gsc_hwmon_platform_data *pdata;
|
||||
struct gsc_hwmon_channel *ch;
|
||||
struct fwnode_handle *child;
|
||||
struct device_node *fan;
|
||||
int nchannels;
|
||||
|
||||
nchannels = device_get_child_node_count(dev);
|
||||
if (nchannels == 0)
|
||||
return ERR_PTR(-ENODEV);
|
||||
|
||||
pdata = devm_kzalloc(dev,
|
||||
sizeof(*pdata) + nchannels * sizeof(*ch),
|
||||
GFP_KERNEL);
|
||||
if (!pdata)
|
||||
return ERR_PTR(-ENOMEM);
|
||||
ch = (struct gsc_hwmon_channel *)(pdata + 1);
|
||||
pdata->channels = ch;
|
||||
pdata->nchannels = nchannels;
|
||||
|
||||
/* fan controller base address */
|
||||
fan = of_find_compatible_node(dev->parent->of_node, NULL, "gw,gsc-fan");
|
||||
if (fan && of_property_read_u32(fan, "reg", &pdata->fan_base)) {
|
||||
dev_err(dev, "fan node without base\n");
|
||||
return ERR_PTR(-EINVAL);
|
||||
}
|
||||
|
||||
/* allocate structures for channels and count instances of each type */
|
||||
device_for_each_child_node(dev, child) {
|
||||
if (fwnode_property_read_string(child, "label", &ch->name)) {
|
||||
dev_err(dev, "channel without label\n");
|
||||
fwnode_handle_put(child);
|
||||
return ERR_PTR(-EINVAL);
|
||||
}
|
||||
if (fwnode_property_read_u32(child, "reg", &ch->reg)) {
|
||||
dev_err(dev, "channel without reg\n");
|
||||
fwnode_handle_put(child);
|
||||
return ERR_PTR(-EINVAL);
|
||||
}
|
||||
if (fwnode_property_read_u32(child, "gw,mode", &ch->mode)) {
|
||||
dev_err(dev, "channel without mode\n");
|
||||
fwnode_handle_put(child);
|
||||
return ERR_PTR(-EINVAL);
|
||||
}
|
||||
if (ch->mode > mode_max) {
|
||||
dev_err(dev, "invalid channel mode\n");
|
||||
fwnode_handle_put(child);
|
||||
return ERR_PTR(-EINVAL);
|
||||
}
|
||||
|
||||
if (!fwnode_property_read_u32(child,
|
||||
"gw,voltage-offset-microvolt",
|
||||
&ch->mvoffset))
|
||||
ch->mvoffset /= 1000;
|
||||
fwnode_property_read_u32_array(child,
|
||||
"gw,voltage-divider-ohms",
|
||||
ch->vdiv, ARRAY_SIZE(ch->vdiv));
|
||||
ch++;
|
||||
}
|
||||
|
||||
return pdata;
|
||||
}
|
||||
|
||||
static int gsc_hwmon_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct gsc_dev *gsc = dev_get_drvdata(pdev->dev.parent);
|
||||
struct device *dev = &pdev->dev;
|
||||
struct device *hwmon_dev;
|
||||
struct gsc_hwmon_platform_data *pdata = dev_get_platdata(dev);
|
||||
struct gsc_hwmon_data *hwmon;
|
||||
const struct attribute_group **groups;
|
||||
int i, i_in, i_temp;
|
||||
|
||||
if (!pdata) {
|
||||
pdata = gsc_hwmon_get_devtree_pdata(dev);
|
||||
if (IS_ERR(pdata))
|
||||
return PTR_ERR(pdata);
|
||||
}
|
||||
|
||||
hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
|
||||
if (!hwmon)
|
||||
return -ENOMEM;
|
||||
hwmon->gsc = gsc;
|
||||
hwmon->pdata = pdata;
|
||||
|
||||
hwmon->regmap = devm_regmap_init(dev, &gsc_hwmon_regmap_bus,
|
||||
gsc->i2c_hwmon,
|
||||
&gsc_hwmon_regmap_config);
|
||||
if (IS_ERR(hwmon->regmap))
|
||||
return PTR_ERR(hwmon->regmap);
|
||||
|
||||
for (i = 0, i_in = 0, i_temp = 0; i < hwmon->pdata->nchannels; i++) {
|
||||
const struct gsc_hwmon_channel *ch = &pdata->channels[i];
|
||||
|
||||
switch (ch->mode) {
|
||||
case mode_temperature:
|
||||
if (i_temp == GSC_HWMON_MAX_TEMP_CH) {
|
||||
dev_err(gsc->dev, "too many temp channels\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
hwmon->temp_ch[i_temp] = ch;
|
||||
hwmon->temp_config[i_temp] = HWMON_T_INPUT |
|
||||
HWMON_T_LABEL;
|
||||
i_temp++;
|
||||
break;
|
||||
case mode_voltage:
|
||||
case mode_voltage_raw:
|
||||
if (i_in == GSC_HWMON_MAX_IN_CH) {
|
||||
dev_err(gsc->dev, "too many input channels\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
hwmon->in_ch[i_in] = ch;
|
||||
hwmon->in_config[i_in] =
|
||||
HWMON_I_INPUT | HWMON_I_LABEL;
|
||||
i_in++;
|
||||
break;
|
||||
default:
|
||||
dev_err(gsc->dev, "invalid mode: %d\n", ch->mode);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
/* setup config structures */
|
||||
hwmon->chip.ops = &gsc_hwmon_ops;
|
||||
hwmon->chip.info = hwmon->info;
|
||||
hwmon->info[0] = &hwmon->temp_info;
|
||||
hwmon->info[1] = &hwmon->in_info;
|
||||
hwmon->temp_info.type = hwmon_temp;
|
||||
hwmon->temp_info.config = hwmon->temp_config;
|
||||
hwmon->in_info.type = hwmon_in;
|
||||
hwmon->in_info.config = hwmon->in_config;
|
||||
|
||||
groups = pdata->fan_base ? gsc_hwmon_groups : NULL;
|
||||
hwmon_dev = devm_hwmon_device_register_with_info(dev,
|
||||
KBUILD_MODNAME, hwmon,
|
||||
&hwmon->chip, groups);
|
||||
return PTR_ERR_OR_ZERO(hwmon_dev);
|
||||
}
|
||||
|
||||
static const struct of_device_id gsc_hwmon_of_match[] = {
|
||||
{ .compatible = "gw,gsc-adc", },
|
||||
{}
|
||||
};
|
||||
|
||||
static struct platform_driver gsc_hwmon_driver = {
|
||||
.driver = {
|
||||
.name = "gsc-hwmon",
|
||||
.of_match_table = gsc_hwmon_of_match,
|
||||
},
|
||||
.probe = gsc_hwmon_probe,
|
||||
};
|
||||
|
||||
module_platform_driver(gsc_hwmon_driver);
|
||||
|
||||
MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
|
||||
MODULE_DESCRIPTION("GSC hardware monitor driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
#ifndef _GSC_HWMON_H
|
||||
#define _GSC_HWMON_H
|
||||
|
||||
enum gsc_hwmon_mode {
|
||||
mode_temperature,
|
||||
mode_voltage,
|
||||
mode_voltage_raw,
|
||||
mode_max,
|
||||
};
|
||||
|
||||
/**
|
||||
* struct gsc_hwmon_channel - configuration parameters
|
||||
* @reg: I2C register offset
|
||||
* @mode: channel mode
|
||||
* @name: channel name
|
||||
* @mvoffset: voltage offset
|
||||
* @vdiv: voltage divider array (2 resistor values in milli-ohms)
|
||||
*/
|
||||
struct gsc_hwmon_channel {
|
||||
unsigned int reg;
|
||||
unsigned int mode;
|
||||
const char *name;
|
||||
unsigned int mvoffset;
|
||||
unsigned int vdiv[2];
|
||||
};
|
||||
|
||||
/**
|
||||
* struct gsc_hwmon_platform_data - platform data for gsc_hwmon driver
|
||||
* @channels: pointer to array of gsc_hwmon_channel structures
|
||||
* describing channels
|
||||
* @nchannels: number of elements in @channels array
|
||||
* @vreference: voltage reference (mV)
|
||||
* @resolution: ADC bit resolution
|
||||
* @fan_base: register base for FAN controller
|
||||
*/
|
||||
struct gsc_hwmon_platform_data {
|
||||
const struct gsc_hwmon_channel *channels;
|
||||
int nchannels;
|
||||
unsigned int resolution;
|
||||
unsigned int vreference;
|
||||
unsigned int fan_base;
|
||||
};
|
||||
#endif
|
||||
Loading…
Reference in New Issue