hwmon: (it87) Add support for IT8620E
IT8620E is mostly compatible to IT7828F. Add generic support for it. IT8620E supports up to 6 fan tachometers and 6 pwm controls. Support for the 6th tachometer and for the additional pwm controls are addded in separate patches. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
parent
4ee07157d6
commit
3ba9d977a9
|
@ -6,6 +6,10 @@ Supported chips:
|
|||
Prefix: 'it8603'
|
||||
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||
Datasheet: Not publicly available
|
||||
* IT8620E
|
||||
Prefix: 'it8620'
|
||||
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||
Datasheet: Not publicly available
|
||||
* IT8705F
|
||||
Prefix: 'it87'
|
||||
Addresses scanned: from Super I/O config space (8 I/O ports)
|
||||
|
@ -106,7 +110,7 @@ motherboard models.
|
|||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the IT8603E, IT8623E, IT8705F,
|
||||
This driver implements support for the IT8603E, IT8620E, IT8623E, IT8705F,
|
||||
IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
|
||||
IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E, and SiS950
|
||||
chips.
|
||||
|
@ -147,8 +151,11 @@ The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
|
|||
until a datasheet becomes available (hopefully.)
|
||||
|
||||
The IT8603E/IT8623E is a custom design, hardware monitoring part is similar to
|
||||
IT8728F. It only supports 16-bit fan mode, the full speed mode of the
|
||||
fan is not supported (value 0 of pwmX_enable).
|
||||
IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
|
||||
of the fan is not supported (value 0 of pwmX_enable).
|
||||
|
||||
The IT8620E is another custom design, hardware monitoring part is similar to
|
||||
IT8728F. It only supports 16-bit fan mode.
|
||||
|
||||
The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
|
||||
|
||||
|
|
|
@ -601,7 +601,7 @@ config SENSORS_IT87
|
|||
If you say yes here you get support for ITE IT8705F, IT8712F,
|
||||
IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
|
||||
IT8771E, IT8772E, IT8781F, IT8782F, IT8783E/F, IT8786E, IT8790E,
|
||||
IT8603E, and IT8623E sensor chips, and the SiS950 clone.
|
||||
IT8603E, IT8620E, and IT8623E sensor chips, and the SiS950 clone.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called it87.
|
||||
|
|
|
@ -11,6 +11,7 @@
|
|||
* similar parts. The other devices are supported by different drivers.
|
||||
*
|
||||
* Supports: IT8603E Super I/O chip w/LPC interface
|
||||
* IT8620E Super I/O chip w/LPC interface
|
||||
* IT8623E Super I/O chip w/LPC interface
|
||||
* IT8705F Super I/O chip w/LPC interface
|
||||
* IT8712F Super I/O chip w/LPC interface
|
||||
|
@ -69,7 +70,7 @@
|
|||
#define DRVNAME "it87"
|
||||
|
||||
enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
|
||||
it8772, it8781, it8782, it8783, it8786, it8790, it8603 };
|
||||
it8772, it8781, it8782, it8783, it8786, it8790, it8603, it8620 };
|
||||
|
||||
static unsigned short force_id;
|
||||
module_param(force_id, ushort, 0);
|
||||
|
@ -155,12 +156,14 @@ static inline void superio_exit(void)
|
|||
#define IT8786E_DEVID 0x8786
|
||||
#define IT8790E_DEVID 0x8790
|
||||
#define IT8603E_DEVID 0x8603
|
||||
#define IT8620E_DEVID 0x8620
|
||||
#define IT8623E_DEVID 0x8623
|
||||
#define IT87_ACT_REG 0x30
|
||||
#define IT87_BASE_REG 0x60
|
||||
|
||||
/* Logical device 7 registers (IT8712F and later) */
|
||||
#define IT87_SIO_GPIO1_REG 0x25
|
||||
#define IT87_SIO_GPIO2_REG 0x26
|
||||
#define IT87_SIO_GPIO3_REG 0x27
|
||||
#define IT87_SIO_GPIO5_REG 0x29
|
||||
#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */
|
||||
|
@ -375,6 +378,14 @@ static const struct it87_devices it87_devices[] = {
|
|||
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL,
|
||||
.peci_mask = 0x07,
|
||||
},
|
||||
[it8620] = {
|
||||
.name = "it8620",
|
||||
.suffix = "E",
|
||||
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
|
||||
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS
|
||||
| FEAT_IN7_INTERNAL,
|
||||
.peci_mask = 0x07,
|
||||
},
|
||||
};
|
||||
|
||||
#define has_16bit_fans(data) ((data)->features & FEAT_16BIT_FANS)
|
||||
|
@ -1850,6 +1861,9 @@ static int __init it87_find(unsigned short *address,
|
|||
case IT8623E_DEVID:
|
||||
sio_data->type = it8603;
|
||||
break;
|
||||
case IT8620E_DEVID:
|
||||
sio_data->type = it8620;
|
||||
break;
|
||||
case 0xffff: /* No device at all */
|
||||
goto exit;
|
||||
default:
|
||||
|
@ -1984,6 +1998,33 @@ static int __init it87_find(unsigned short *address,
|
|||
|
||||
sio_data->internal |= (1 << 3); /* in9 is AVCC */
|
||||
|
||||
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
|
||||
} else if (sio_data->type == it8620) {
|
||||
int reg;
|
||||
|
||||
superio_select(GPIO);
|
||||
|
||||
/* Check for fan4, fan5 */
|
||||
reg = superio_inb(IT87_SIO_GPIO2_REG);
|
||||
if (!(reg & (1 << 5)))
|
||||
sio_data->skip_fan |= (1 << 3);
|
||||
if (!(reg & (1 << 4)))
|
||||
sio_data->skip_fan |= (1 << 4);
|
||||
|
||||
/* Check for pwm3, fan3 */
|
||||
reg = superio_inb(IT87_SIO_GPIO3_REG);
|
||||
if (reg & (1 << 6))
|
||||
sio_data->skip_pwm |= (1 << 2);
|
||||
if (reg & (1 << 7))
|
||||
sio_data->skip_fan |= (1 << 2);
|
||||
|
||||
/* Check for pwm2, fan2 */
|
||||
reg = superio_inb(IT87_SIO_GPIO5_REG);
|
||||
if (reg & (1 << 1))
|
||||
sio_data->skip_pwm |= (1 << 1);
|
||||
if (reg & (1 << 2))
|
||||
sio_data->skip_fan |= (1 << 1);
|
||||
|
||||
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
|
||||
} else {
|
||||
int reg;
|
||||
|
|
Loading…
Reference in New Issue