diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c index 093c4587832a..f8c70f1a34fe 100644 --- a/drivers/media/i2c/imx274.c +++ b/drivers/media/i2c/imx274.c @@ -5,6 +5,7 @@ * * Leon Luo * Edwin Zou + * Luca Ceresoli * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -25,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -74,7 +76,7 @@ */ #define IMX274_MIN_EXPOSURE_TIME (4 * 260 / 72) -#define IMX274_DEFAULT_MODE IMX274_MODE_3840X2160 +#define IMX274_DEFAULT_MODE IMX274_BINNING_OFF #define IMX274_MAX_WIDTH (3840) #define IMX274_MAX_HEIGHT (2160) #define IMX274_MAX_FRAME_RATE (120) @@ -111,6 +113,20 @@ #define IMX274_SHR_REG_LSB 0x300C /* SHR */ #define IMX274_SVR_REG_MSB 0x300F /* SVR */ #define IMX274_SVR_REG_LSB 0x300E /* SVR */ +#define IMX274_HTRIM_EN_REG 0x3037 +#define IMX274_HTRIM_START_REG_LSB 0x3038 +#define IMX274_HTRIM_START_REG_MSB 0x3039 +#define IMX274_HTRIM_END_REG_LSB 0x303A +#define IMX274_HTRIM_END_REG_MSB 0x303B +#define IMX274_VWIDCUTEN_REG 0x30DD +#define IMX274_VWIDCUT_REG_LSB 0x30DE +#define IMX274_VWIDCUT_REG_MSB 0x30DF +#define IMX274_VWINPOS_REG_LSB 0x30E0 +#define IMX274_VWINPOS_REG_MSB 0x30E1 +#define IMX274_WRITE_VSIZE_REG_LSB 0x3130 +#define IMX274_WRITE_VSIZE_REG_MSB 0x3131 +#define IMX274_Y_OUT_SIZE_REG_LSB 0x3132 +#define IMX274_Y_OUT_SIZE_REG_MSB 0x3133 #define IMX274_VMAX_REG_1 0x30FA /* VMAX, MSB */ #define IMX274_VMAX_REG_2 0x30F9 /* VMAX */ #define IMX274_VMAX_REG_3 0x30F8 /* VMAX, LSB */ @@ -140,10 +156,10 @@ static const struct regmap_config imx274_regmap_config = { .cache_type = REGCACHE_RBTREE, }; -enum imx274_mode { - IMX274_MODE_3840X2160, - IMX274_MODE_1920X1080, - IMX274_MODE_1280X720, +enum imx274_binning { + IMX274_BINNING_OFF, + IMX274_BINNING_2_1, + IMX274_BINNING_3_1, }; /* @@ -152,8 +168,8 @@ enum imx274_mode { * These are the values to configure the sensor in one of the * implemented modes. * - * @size: recommended recording pixels * @init_regs: registers to initialize the mode + * @bin_ratio: downscale factor (e.g. 3 for 3:1 binning) * @min_frame_len: Minimum frame length for each mode (see "Frame Rate * Adjustment (CSI-2)" in the datasheet) * @min_SHR: Minimum SHR register value (see "Shutter Setting (CSI-2)" in the @@ -163,8 +179,8 @@ enum imx274_mode { * in Each Readout Drive Mode (CSI-2)" in the datasheet) */ struct imx274_frmfmt { - struct v4l2_frmsize_discrete size; const struct reg_8 *init_regs; + unsigned int bin_ratio; int min_frame_len; int min_SHR; int max_fps; @@ -215,31 +231,14 @@ static const struct reg_8 imx274_mode1_3840x2160_raw10[] = { {0x3004, 0x01}, {0x3005, 0x01}, {0x3006, 0x00}, - {0x3007, 0x02}, + {0x3007, 0xa2}, {0x3018, 0xA2}, /* output XVS, HVS */ {0x306B, 0x05}, {0x30E2, 0x01}, - {0x30F6, 0x07}, /* HMAX, 263 */ - {0x30F7, 0x01}, /* HMAX */ - - {0x30dd, 0x01}, /* crop to 2160 */ - {0x30de, 0x06}, - {0x30df, 0x00}, - {0x30e0, 0x12}, - {0x30e1, 0x00}, - {0x3037, 0x01}, /* to crop to 3840 */ - {0x3038, 0x0c}, - {0x3039, 0x00}, - {0x303a, 0x0c}, - {0x303b, 0x0f}, {0x30EE, 0x01}, - {0x3130, 0x86}, - {0x3131, 0x08}, - {0x3132, 0x7E}, - {0x3133, 0x08}, {0x3342, 0x0A}, {0x3343, 0x00}, {0x3344, 0x16}, @@ -273,32 +272,14 @@ static const struct reg_8 imx274_mode3_1920x1080_raw10[] = { {0x3004, 0x02}, {0x3005, 0x21}, {0x3006, 0x00}, - {0x3007, 0x11}, + {0x3007, 0xb1}, {0x3018, 0xA2}, /* output XVS, HVS */ {0x306B, 0x05}, {0x30E2, 0x02}, - {0x30F6, 0x04}, /* HMAX, 260 */ - {0x30F7, 0x01}, /* HMAX */ - - {0x30dd, 0x01}, /* to crop to 1920x1080 */ - {0x30de, 0x05}, - {0x30df, 0x00}, - {0x30e0, 0x04}, - {0x30e1, 0x00}, - {0x3037, 0x01}, - {0x3038, 0x0c}, - {0x3039, 0x00}, - {0x303a, 0x0c}, - {0x303b, 0x0f}, - {0x30EE, 0x01}, - {0x3130, 0x4E}, - {0x3131, 0x04}, - {0x3132, 0x46}, - {0x3133, 0x04}, {0x3342, 0x0A}, {0x3343, 0x00}, {0x3344, 0x1A}, @@ -331,31 +312,14 @@ static const struct reg_8 imx274_mode5_1280x720_raw10[] = { {0x3004, 0x03}, {0x3005, 0x31}, {0x3006, 0x00}, - {0x3007, 0x09}, + {0x3007, 0xa9}, {0x3018, 0xA2}, /* output XVS, HVS */ {0x306B, 0x05}, {0x30E2, 0x03}, - {0x30F6, 0x04}, /* HMAX, 260 */ - {0x30F7, 0x01}, /* HMAX */ - - {0x30DD, 0x01}, - {0x30DE, 0x07}, - {0x30DF, 0x00}, - {0x40E0, 0x04}, - {0x30E1, 0x00}, - {0x3030, 0xD4}, - {0x3031, 0x02}, - {0x3032, 0xD0}, - {0x3033, 0x02}, - {0x30EE, 0x01}, - {0x3130, 0xE2}, - {0x3131, 0x02}, - {0x3132, 0xDE}, - {0x3133, 0x02}, {0x3342, 0x0A}, {0x3343, 0x00}, {0x3344, 0x1B}, @@ -498,7 +462,7 @@ static const struct reg_8 imx274_tp_regs[] = { static const struct imx274_frmfmt imx274_formats[] = { { /* mode 1, 4K */ - .size = {3840, 2160}, + .bin_ratio = 1, .init_regs = imx274_mode1_3840x2160_raw10, .min_frame_len = 4550, .min_SHR = 12, @@ -507,7 +471,7 @@ static const struct imx274_frmfmt imx274_formats[] = { }, { /* mode 3, 1080p */ - .size = {1920, 1080}, + .bin_ratio = 2, .init_regs = imx274_mode3_1920x1080_raw10, .min_frame_len = 2310, .min_SHR = 8, @@ -516,7 +480,7 @@ static const struct imx274_frmfmt imx274_formats[] = { }, { /* mode 5, 720p */ - .size = {1280, 720}, + .bin_ratio = 3, .init_regs = imx274_mode5_1280x720_raw10, .min_frame_len = 2310, .min_SHR = 8, @@ -547,7 +511,10 @@ struct imx274_ctrls { * @pad: Media pad structure * @client: Pointer to I2C client * @ctrls: imx274 control structure + * @crop: rect to be captured + * @compose: compose rect, i.e. output resolution * @format: V4L2 media bus frame format structure + * (width and height are in sync with the compose rect) * @frame_rate: V4L2 frame rate structure * @regmap: Pointer to regmap structure * @reset_gpio: Pointer to reset gpio @@ -559,6 +526,7 @@ struct stimx274 { struct media_pad pad; struct i2c_client *client; struct imx274_ctrls ctrls; + struct v4l2_rect crop; struct v4l2_mbus_framefmt format; struct v4l2_fract frame_interval; struct regmap *regmap; @@ -567,6 +535,13 @@ struct stimx274 { const struct imx274_frmfmt *mode; }; +#define IMX274_ROUND(dim, step, flags) \ + ((flags) & V4L2_SEL_FLAG_GE \ + ? roundup((dim), (step)) \ + : ((flags) & V4L2_SEL_FLAG_LE \ + ? rounddown((dim), (step)) \ + : rounddown((dim) + (step) / 2, (step)))) + /* * Function declaration */ @@ -840,6 +815,114 @@ static int imx274_s_ctrl(struct v4l2_ctrl *ctrl) return ret; } +static int imx274_binning_goodness(struct stimx274 *imx274, + int w, int ask_w, + int h, int ask_h, u32 flags) +{ + struct device *dev = &imx274->client->dev; + const int goodness = 100000; + int val = 0; + + if (flags & V4L2_SEL_FLAG_GE) { + if (w < ask_w) + val -= goodness; + if (h < ask_h) + val -= goodness; + } + + if (flags & V4L2_SEL_FLAG_LE) { + if (w > ask_w) + val -= goodness; + if (h > ask_h) + val -= goodness; + } + + val -= abs(w - ask_w); + val -= abs(h - ask_h); + + dev_dbg(dev, "%s: ask %dx%d, size %dx%d, goodness %d\n", + __func__, ask_w, ask_h, w, h, val); + + return val; +} + +/** + * Helper function to change binning and set both compose and format. + * + * We have two entry points to change binning: set_fmt and + * set_selection(COMPOSE). Both have to compute the new output size + * and set it in both the compose rect and the frame format size. We + * also need to do the same things after setting cropping to restore + * 1:1 binning. + * + * This function contains the common code for these three cases, it + * has many arguments in order to accommodate the needs of all of + * them. + * + * Must be called with imx274->lock locked. + * + * @imx274: The device object + * @cfg: The pad config we are editing for TRY requests + * @which: V4L2_SUBDEV_FORMAT_ACTIVE or V4L2_SUBDEV_FORMAT_TRY from the caller + * @width: Input-output parameter: set to the desired width before + * the call, contains the chosen value after returning successfully + * @height: Input-output parameter for height (see @width) + * @flags: Selection flags from struct v4l2_subdev_selection, or 0 if not + * available (when called from set_fmt) + */ +static int __imx274_change_compose(struct stimx274 *imx274, + struct v4l2_subdev_pad_config *cfg, + u32 which, + u32 *width, + u32 *height, + u32 flags) +{ + struct device *dev = &imx274->client->dev; + const struct v4l2_rect *cur_crop; + struct v4l2_mbus_framefmt *tgt_fmt; + unsigned int i; + const struct imx274_frmfmt *best_mode = &imx274_formats[0]; + int best_goodness = INT_MIN; + + if (which == V4L2_SUBDEV_FORMAT_TRY) { + cur_crop = &cfg->try_crop; + tgt_fmt = &cfg->try_fmt; + } else { + cur_crop = &imx274->crop; + tgt_fmt = &imx274->format; + } + + for (i = 0; i < ARRAY_SIZE(imx274_formats); i++) { + unsigned int ratio = imx274_formats[i].bin_ratio; + + int goodness = imx274_binning_goodness( + imx274, + cur_crop->width / ratio, *width, + cur_crop->height / ratio, *height, + flags); + + if (goodness >= best_goodness) { + best_goodness = goodness; + best_mode = &imx274_formats[i]; + } + } + + *width = cur_crop->width / best_mode->bin_ratio; + *height = cur_crop->height / best_mode->bin_ratio; + + if (which == V4L2_SUBDEV_FORMAT_ACTIVE) + imx274->mode = best_mode; + + dev_dbg(dev, "%s: selected %u:1 binning\n", + __func__, best_mode->bin_ratio); + + tgt_fmt->width = *width; + tgt_fmt->height = *height; + tgt_fmt->field = V4L2_FIELD_NONE; + + return 0; +} + /** * imx274_get_fmt - Get the pad format * @sd: Pointer to V4L2 Sub device structure @@ -878,45 +961,238 @@ static int imx274_set_fmt(struct v4l2_subdev *sd, { struct v4l2_mbus_framefmt *fmt = &format->format; struct stimx274 *imx274 = to_imx274(sd); - struct i2c_client *client = imx274->client; - int index; - - dev_dbg(&client->dev, - "%s: width = %d height = %d code = %d\n", - __func__, fmt->width, fmt->height, fmt->code); + int err = 0; mutex_lock(&imx274->lock); - for (index = 0; index < ARRAY_SIZE(imx274_formats); index++) { - if (imx274_formats[index].size.width == fmt->width && - imx274_formats[index].size.height == fmt->height) - break; - } + err = __imx274_change_compose(imx274, cfg, format->which, + &fmt->width, &fmt->height, 0); - if (index >= ARRAY_SIZE(imx274_formats)) { - /* default to first format */ - index = 0; - } + if (err) + goto out; - imx274->mode = &imx274_formats[index]; - - if (fmt->width > IMX274_MAX_WIDTH) - fmt->width = IMX274_MAX_WIDTH; - if (fmt->height > IMX274_MAX_HEIGHT) - fmt->height = IMX274_MAX_HEIGHT; - fmt->width = fmt->width & (~IMX274_MASK_LSB_2_BITS); - fmt->height = fmt->height & (~IMX274_MASK_LSB_2_BITS); + /* + * __imx274_change_compose already set width and height in the + * applicable format, but we need to keep all other format + * values, so do a full copy here + */ fmt->field = V4L2_FIELD_NONE; - if (format->which == V4L2_SUBDEV_FORMAT_TRY) cfg->try_fmt = *fmt; else imx274->format = *fmt; +out: mutex_unlock(&imx274->lock); + + return err; +} + +static int imx274_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct stimx274 *imx274 = to_imx274(sd); + const struct v4l2_rect *src_crop; + const struct v4l2_mbus_framefmt *src_fmt; + int ret = 0; + + if (sel->pad != 0) + return -EINVAL; + + if (sel->target == V4L2_SEL_TGT_CROP_BOUNDS) { + sel->r.left = 0; + sel->r.top = 0; + sel->r.width = IMX274_MAX_WIDTH; + sel->r.height = IMX274_MAX_HEIGHT; + return 0; + } + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) { + src_crop = &cfg->try_crop; + src_fmt = &cfg->try_fmt; + } else { + src_crop = &imx274->crop; + src_fmt = &imx274->format; + } + + mutex_lock(&imx274->lock); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + sel->r = *src_crop; + break; + case V4L2_SEL_TGT_COMPOSE_BOUNDS: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = src_crop->width; + sel->r.height = src_crop->height; + break; + case V4L2_SEL_TGT_COMPOSE: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = src_fmt->width; + sel->r.height = src_fmt->height; + break; + default: + ret = -EINVAL; + } + + mutex_unlock(&imx274->lock); + + return ret; +} + +static int imx274_set_selection_crop(struct stimx274 *imx274, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct v4l2_rect *tgt_crop; + struct v4l2_rect new_crop; + bool size_changed; + + /* + * h_step could be 12 or 24 depending on the binning. But we + * won't know the binning until we choose the mode later in + * __imx274_change_compose(). Thus let's be safe and use the + * most conservative value in all cases. + */ + const u32 h_step = 24; + + new_crop.width = min_t(u32, + IMX274_ROUND(sel->r.width, h_step, sel->flags), + IMX274_MAX_WIDTH); + + /* Constraint: HTRIMMING_END - HTRIMMING_START >= 144 */ + if (new_crop.width < 144) + new_crop.width = 144; + + new_crop.left = min_t(u32, + IMX274_ROUND(sel->r.left, h_step, 0), + IMX274_MAX_WIDTH - new_crop.width); + + new_crop.height = min_t(u32, + IMX274_ROUND(sel->r.height, 2, sel->flags), + IMX274_MAX_HEIGHT); + + new_crop.top = min_t(u32, IMX274_ROUND(sel->r.top, 2, 0), + IMX274_MAX_HEIGHT - new_crop.height); + + sel->r = new_crop; + + if (sel->which == V4L2_SUBDEV_FORMAT_TRY) + tgt_crop = &cfg->try_crop; + else + tgt_crop = &imx274->crop; + + mutex_lock(&imx274->lock); + + size_changed = (new_crop.width != tgt_crop->width || + new_crop.height != tgt_crop->height); + + /* __imx274_change_compose needs the new size in *tgt_crop */ + *tgt_crop = new_crop; + + /* if crop size changed then reset the output image size */ + if (size_changed) + __imx274_change_compose(imx274, cfg, sel->which, + &new_crop.width, &new_crop.height, + sel->flags); + + mutex_unlock(&imx274->lock); + return 0; } +static int imx274_set_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel) +{ + struct stimx274 *imx274 = to_imx274(sd); + + if (sel->pad != 0) + return -EINVAL; + + if (sel->target == V4L2_SEL_TGT_CROP) + return imx274_set_selection_crop(imx274, cfg, sel); + + if (sel->target == V4L2_SEL_TGT_COMPOSE) { + int err; + + mutex_lock(&imx274->lock); + err = __imx274_change_compose(imx274, cfg, sel->which, + &sel->r.width, &sel->r.height, + sel->flags); + mutex_unlock(&imx274->lock); + + /* + * __imx274_change_compose already set width and + * height in set->r, we still need to set top-left + */ + if (!err) { + sel->r.top = 0; + sel->r.left = 0; + } + + return err; + } + + return -EINVAL; +} + +static int imx274_apply_trimming(struct stimx274 *imx274) +{ + u32 h_start; + u32 h_end; + u32 hmax; + u32 v_cut; + s32 v_pos; + u32 write_v_size; + u32 y_out_size; + int err; + + h_start = imx274->crop.left + 12; + h_end = h_start + imx274->crop.width; + + /* Use the minimum allowed value of HMAX */ + /* Note: except in mode 1, (width / 16 + 23) is always < hmax_min */ + /* Note: 260 is the minimum HMAX in all implemented modes */ + hmax = max_t(u32, 260, (imx274->crop.width) / 16 + 23); + + /* invert v_pos if VFLIP */ + v_pos = imx274->ctrls.vflip->cur.val ? + (-imx274->crop.top / 2) : (imx274->crop.top / 2); + v_cut = (IMX274_MAX_HEIGHT - imx274->crop.height) / 2; + write_v_size = imx274->crop.height + 22; + y_out_size = imx274->crop.height + 14; + + err = imx274_write_mbreg(imx274, IMX274_HMAX_REG_LSB, hmax, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_HTRIM_EN_REG, 1, 1); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_HTRIM_START_REG_LSB, + h_start, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_HTRIM_END_REG_LSB, + h_end, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_VWIDCUTEN_REG, 1, 1); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_VWIDCUT_REG_LSB, + v_cut, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_VWINPOS_REG_LSB, + v_pos, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_WRITE_VSIZE_REG_LSB, + write_v_size, 2); + if (!err) + err = imx274_write_mbreg(imx274, IMX274_Y_OUT_SIZE_REG_LSB, + y_out_size, 2); + + return err; +} + /** * imx274_g_frame_interval - Get the frame interval * @sd: Pointer to V4L2 Sub device structure @@ -1057,6 +1333,10 @@ static int imx274_s_stream(struct v4l2_subdev *sd, int on) if (ret) goto fail; + ret = imx274_apply_trimming(imx274); + if (ret) + goto fail; + /* * update frame rate & expsoure. if the last mode is different, * HMAX could be changed. As the result, frame rate & exposure @@ -1545,6 +1825,8 @@ fail: static const struct v4l2_subdev_pad_ops imx274_pad_ops = { .get_fmt = imx274_get_fmt, .set_fmt = imx274_set_fmt, + .get_selection = imx274_get_selection, + .set_selection = imx274_set_selection, }; static const struct v4l2_subdev_video_ops imx274_video_ops = { @@ -1590,8 +1872,10 @@ static int imx274_probe(struct i2c_client *client, /* initialize format */ imx274->mode = &imx274_formats[IMX274_DEFAULT_MODE]; - imx274->format.width = imx274->mode->size.width; - imx274->format.height = imx274->mode->size.height; + imx274->crop.width = IMX274_MAX_WIDTH; + imx274->crop.height = IMX274_MAX_HEIGHT; + imx274->format.width = imx274->crop.width / imx274->mode->bin_ratio; + imx274->format.height = imx274->crop.height / imx274->mode->bin_ratio; imx274->format.field = V4L2_FIELD_NONE; imx274->format.code = MEDIA_BUS_FMT_SRGGB10_1X10; imx274->format.colorspace = V4L2_COLORSPACE_SRGB;