Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

Pull m68nommu updates from Greg Ungerer:
 "A series of cleanups for the FLAT format binary loader, binfmt_flat,
  from Christoph.

  The end goal is to support no-MMU on RISC-V, and the last patch
  enables that"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  riscv: add binfmt_flat support
  binfmt_flat: don't offset the data start
  binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c
  binfmt_flat: remove the persistent argument from flat_get_addr_from_rp
  binfmt_flat: provide an asm-generic/flat.h
  binfmt_flat: make support for old format binaries optional
  binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option
  binfmt_flat: add endianess annotations
  binfmt_flat: use fixed size type for the on-disk format
  binfmt_flat: consolidate two version of flat_v2_reloc_t
  binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition
  binfmt_flat: remove the uapi <linux/flat.h> header
  binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable
  binfmt_flat: remove flat_old_ram_flag
  binfmt_flat: provide a default version of flat_get_relocate_addr
  binfmt_flat: remove flat_set_persistent
  binfmt_flat: remove flat_reloc_valid
This commit is contained in:
Linus Torvalds 2019-07-10 21:42:03 -07:00
commit 398364a35d
21 changed files with 145 additions and 187 deletions

View File

@ -4,6 +4,7 @@ config ARM
default y
select ARCH_32BIT_OFF_T
select ARCH_CLOCKSOURCE_DATA
select ARCH_HAS_BINFMT_FLAT
select ARCH_HAS_DEBUG_VIRTUAL if MMU
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ELF_RANDOMIZE
@ -30,6 +31,7 @@ config ARM
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF
select ARCH_WANT_IPC_PARSE_VERSION
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select BUILDTIME_EXTABLE_SORT if MMU
select CLONE_BACKWARDS
select CPU_PM if SUSPEND || CPU_IDLE

View File

@ -5,6 +5,7 @@ generic-y += early_ioremap.h
generic-y += emergency-restart.h
generic-y += exec.h
generic-y += extable.h
generic-y += flat.h
generic-y += irq_regs.h
generic-y += kdebug.h
generic-y += local.h

View File

@ -7,6 +7,7 @@
config C6X
def_bool y
select ARCH_32BIT_OFF_T
select ARCH_HAS_BINFMT_FLAT
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select CLKDEV_LOOKUP

View File

@ -4,11 +4,8 @@
#include <asm/unaligned.h>
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
u32 *addr)
{
*addr = get_unaligned((__force u32 *)rp);
return 0;
@ -18,7 +15,5 @@ static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
put_unaligned(addr, (__force u32 *)rp);
return 0;
}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
#endif /* __ASM_C6X_FLAT_H */

View File

@ -2,6 +2,9 @@
config H8300
def_bool y
select ARCH_32BIT_OFF_T
select ARCH_HAS_BINFMT_FLAT
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select BINFMT_FLAT_OLD_ALWAYS_RAM
select GENERIC_ATOMIC64
select HAVE_UID16
select VIRT_TO_BUS

View File

@ -8,11 +8,6 @@
#include <asm/unaligned.h>
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#define flat_set_persistent(relval, p) 0
/*
* on the H8 a couple of the relocations have an instruction in the
* top byte. As there can only be 24bits of address space, we just
@ -22,7 +17,7 @@
#define flat_get_relocate_addr(rel) (rel & ~0x00000001)
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
u32 *addr)
{
u32 val = get_unaligned((__force u32 *)rp);
if (!(flags & FLAT_FLAG_GOTPIC))

View File

@ -3,12 +3,14 @@ config M68K
bool
default y
select ARCH_32BIT_OFF_T
select ARCH_HAS_BINFMT_FLAT
select ARCH_HAS_DMA_MMAP_PGPROT if MMU && !COLDFIRE
select ARCH_HAS_DMA_PREP_COHERENT
select ARCH_HAS_SYNC_DMA_FOR_DEVICE if HAS_DMA
select ARCH_MIGHT_HAVE_PC_PARPORT if ISA
select ARCH_NO_COHERENT_DMA_MMAP if !MMU
select ARCH_NO_PREEMPT if !COLDFIRE
select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
select DMA_DIRECT_REMAP if HAS_DMA && MMU && !COLDFIRE
select HAVE_IDE
select HAVE_AOUT if MMU

View File

@ -6,35 +6,7 @@
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
#include <linux/uaccess.h>
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
{
#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
return copy_from_user(addr, rp, 4) ? -EFAULT : 0;
#else
return get_user(*addr, rp);
#endif
}
static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
{
#ifdef CONFIG_CPU_HAS_NO_UNALIGNED
return copy_to_user(rp, &addr, 4) ? -EFAULT : 0;
#else
return put_user(addr, rp);
#endif
}
#define flat_get_relocate_addr(rel) (rel)
static inline int flat_set_persistent(u32 relval, u32 *persistent)
{
return 0;
}
#include <asm-generic/flat.h>
#define FLAT_PLAT_INIT(regs) \
do { \

View File

@ -3,6 +3,7 @@ config MICROBLAZE
def_bool y
select ARCH_32BIT_OFF_T
select ARCH_NO_SWAP
select ARCH_HAS_BINFMT_FLAT if !MMU
select ARCH_HAS_DMA_COHERENT_TO_PFN if MMU
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_SYNC_DMA_FOR_CPU

View File

@ -13,11 +13,6 @@
#include <asm/unaligned.h>
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#define flat_set_persistent(relval, p) 0
/*
* Microblaze works a little differently from other arches, because
* of the MICROBLAZE_64 reloc type. Here, a 32 bit address is split
@ -33,7 +28,7 @@
*/
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
u32 *addr)
{
u32 *p = (__force u32 *)rp;

View File

@ -17,6 +17,7 @@ config RISCV
select OF
select OF_EARLY_FLATTREE
select OF_IRQ
select ARCH_HAS_BINFMT_FLAT
select ARCH_WANT_FRAME_POINTERS
select CLONE_BACKWARDS
select COMMON_CLK

View File

@ -5,6 +5,7 @@ generic-y += compat.h
generic-y += device.h
generic-y += div64.h
generic-y += extable.h
generic-y += flat.h
generic-y += dma.h
generic-y += dma-contiguous.h
generic-y += dma-mapping.h

View File

@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
config SUPERH
def_bool y
select ARCH_HAS_BINFMT_FLAT if !MMU
select ARCH_HAS_PTE_SPECIAL
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_MIGHT_HAVE_PC_PARPORT

View File

@ -11,11 +11,8 @@
#include <asm/unaligned.h>
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
u32 *addr)
{
*addr = get_unaligned((__force u32 *)rp);
return 0;
@ -25,8 +22,6 @@ static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
put_unaligned(addr, (__force u32 *)rp);
return 0;
}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) ({ (void)p; 0; })
#define FLAT_PLAT_INIT(_r) \
do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \

View File

@ -2,6 +2,7 @@
config XTENSA
def_bool y
select ARCH_32BIT_OFF_T
select ARCH_HAS_BINFMT_FLAT if !MMU
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
select ARCH_NO_COHERENT_DMA_MMAP if !MMU

View File

@ -4,11 +4,8 @@
#include <asm/unaligned.h>
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
u32 *addr)
{
*addr = get_unaligned((__force u32 *)rp);
return 0;
@ -18,7 +15,5 @@ static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
put_unaligned(addr, (__force u32 *)rp);
return 0;
}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
#endif /* __ASM_XTENSA_FLAT_H */

View File

@ -91,12 +91,28 @@ config BINFMT_SCRIPT
Most systems will not boot if you say M or N here. If unsure, say Y.
config ARCH_HAS_BINFMT_FLAT
bool
config BINFMT_FLAT
bool "Kernel support for flat binaries"
depends on !MMU || ARM || M68K
depends on ARCH_HAS_BINFMT_FLAT
help
Support uClinux FLAT format binaries.
config BINFMT_FLAT_ARGVP_ENVP_ON_STACK
bool
config BINFMT_FLAT_OLD_ALWAYS_RAM
bool
config BINFMT_FLAT_OLD
bool "Enable support for very old legacy flat binaries"
depends on BINFMT_FLAT
help
Support decade old uClinux FLAT format binaries. Unless you know
you have some of those say N here.
config BINFMT_ZFLAT
bool "Enable ZFLAT support"
depends on BINFMT_FLAT

View File

@ -42,6 +42,11 @@
#include <asm/unaligned.h>
#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/flat.h>
#ifndef flat_get_relocate_addr
#define flat_get_relocate_addr(rel) (rel)
#endif
/****************************************************************************/
@ -63,6 +68,12 @@
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
#ifdef CONFIG_BINFMT_SHARED_FLAT
#define MAX_SHARED_LIBS (4)
#else
#define MAX_SHARED_LIBS (1)
#endif
struct lib_info {
struct {
unsigned long start_code; /* Start of text segment */
@ -120,14 +131,15 @@ static int create_flat_tables(struct linux_binprm *bprm, unsigned long arg_start
sp -= bprm->envc + 1;
sp -= bprm->argc + 1;
sp -= flat_argvp_envp_on_stack() ? 2 : 0;
if (IS_ENABLED(CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK))
sp -= 2; /* argvp + envp */
sp -= 1; /* &argc */
current->mm->start_stack = (unsigned long)sp & -FLAT_STACK_ALIGN;
sp = (unsigned long __user *)current->mm->start_stack;
__put_user(bprm->argc, sp++);
if (flat_argvp_envp_on_stack()) {
if (IS_ENABLED(CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK)) {
unsigned long argv, envp;
argv = (unsigned long)(sp + 2);
envp = (unsigned long)(sp + 2 + bprm->argc + 1);
@ -345,7 +357,7 @@ calc_reloc(unsigned long r, struct lib_info *p, int curid, int internalp)
start_code = p->lib_list[id].start_code;
text_len = p->lib_list[id].text_len;
if (!flat_reloc_valid(r, start_brk - start_data + text_len)) {
if (r > start_brk - start_data + text_len) {
pr_err("reloc outside program 0x%lx (0 - 0x%lx/0x%lx)",
r, start_brk-start_data+text_len, text_len);
goto failed;
@ -368,6 +380,7 @@ failed:
/****************************************************************************/
#ifdef CONFIG_BINFMT_FLAT_OLD
static void old_reloc(unsigned long rl)
{
static const char *segment[] = { "TEXT", "DATA", "BSS", "*UNKNOWN*" };
@ -405,6 +418,7 @@ static void old_reloc(unsigned long rl)
pr_debug("Relocation became %lx\n", val);
}
#endif /* CONFIG_BINFMT_FLAT_OLD */
/****************************************************************************/
@ -415,7 +429,8 @@ static int load_flat_file(struct linux_binprm *bprm,
unsigned long textpos, datapos, realdatastart;
u32 text_len, data_len, bss_len, stack_len, full_data, flags;
unsigned long len, memp, memp_size, extra, rlim;
u32 __user *reloc, *rp;
__be32 __user *reloc;
u32 __user *rp;
struct inode *inode;
int i, rev, relocs;
loff_t fpos;
@ -454,6 +469,7 @@ static int load_flat_file(struct linux_binprm *bprm,
if (flags & FLAT_FLAG_KTRACE)
pr_info("Loading file: %s\n", bprm->filename);
#ifdef CONFIG_BINFMT_FLAT_OLD
if (rev != FLAT_VERSION && rev != OLD_FLAT_VERSION) {
pr_err("bad flat file version 0x%x (supported 0x%lx and 0x%lx)\n",
rev, FLAT_VERSION, OLD_FLAT_VERSION);
@ -469,6 +485,23 @@ static int load_flat_file(struct linux_binprm *bprm,
goto err;
}
/*
* fix up the flags for the older format, there were all kinds
* of endian hacks, this only works for the simple cases
*/
if (rev == OLD_FLAT_VERSION &&
(flags || IS_ENABLED(CONFIG_BINFMT_FLAT_OLD_ALWAYS_RAM)))
flags = FLAT_FLAG_RAM;
#else /* CONFIG_BINFMT_FLAT_OLD */
if (rev != FLAT_VERSION) {
pr_err("bad flat file version 0x%x (supported 0x%lx)\n",
rev, FLAT_VERSION);
ret = -ENOEXEC;
goto err;
}
#endif /* !CONFIG_BINFMT_FLAT_OLD */
/*
* Make sure the header params are sane.
* 28 bits (256 MB) is way more than reasonable in this case.
@ -480,13 +513,6 @@ static int load_flat_file(struct linux_binprm *bprm,
goto err;
}
/*
* fix up the flags for the older format, there were all kinds
* of endian hacks, this only works for the simple cases
*/
if (rev == OLD_FLAT_VERSION && flat_old_ram_flag(flags))
flags = FLAT_FLAG_RAM;
#ifndef CONFIG_BINFMT_ZFLAT
if (flags & (FLAT_FLAG_GZIP|FLAT_FLAG_GZDATA)) {
pr_err("Support for ZFLAT executables is not enabled.\n");
@ -547,7 +573,7 @@ static int load_flat_file(struct linux_binprm *bprm,
goto err;
}
len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long);
len = data_len + extra;
len = PAGE_ALIGN(len);
realdatastart = vm_mmap(NULL, 0, len,
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
@ -561,9 +587,7 @@ static int load_flat_file(struct linux_binprm *bprm,
vm_munmap(textpos, text_len);
goto err;
}
datapos = ALIGN(realdatastart +
MAX_SHARED_LIBS * sizeof(unsigned long),
FLAT_DATA_ALIGN);
datapos = ALIGN(realdatastart, FLAT_DATA_ALIGN);
pr_debug("Allocated data+bss+stack (%u bytes): %lx\n",
data_len + bss_len + stack_len, datapos);
@ -587,13 +611,13 @@ static int load_flat_file(struct linux_binprm *bprm,
goto err;
}
reloc = (u32 __user *)
reloc = (__be32 __user *)
(datapos + (ntohl(hdr->reloc_start) - text_len));
memp = realdatastart;
memp_size = len;
} else {
len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(u32);
len = text_len + data_len + extra;
len = PAGE_ALIGN(len);
textpos = vm_mmap(NULL, 0, len,
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
@ -608,11 +632,9 @@ static int load_flat_file(struct linux_binprm *bprm,
}
realdatastart = textpos + ntohl(hdr->data_start);
datapos = ALIGN(realdatastart +
MAX_SHARED_LIBS * sizeof(u32),
FLAT_DATA_ALIGN);
datapos = ALIGN(realdatastart, FLAT_DATA_ALIGN);
reloc = (u32 __user *)
reloc = (__be32 __user *)
(datapos + (ntohl(hdr->reloc_start) - text_len));
memp = textpos;
memp_size = len;
@ -627,8 +649,9 @@ static int load_flat_file(struct linux_binprm *bprm,
(text_len + full_data
- sizeof(struct flat_hdr)),
0);
memmove((void *) datapos, (void *) realdatastart,
full_data);
if (datapos != realdatastart)
memmove((void *)datapos, (void *)realdatastart,
full_data);
#else
/*
* This is used on MMU systems mainly for testing.
@ -684,8 +707,7 @@ static int load_flat_file(struct linux_binprm *bprm,
if (IS_ERR_VALUE(result)) {
ret = result;
pr_err("Unable to read code+data+bss, errno %d\n", ret);
vm_munmap(textpos, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(u32));
vm_munmap(textpos, text_len + data_len + extra);
goto err;
}
}
@ -775,20 +797,18 @@ static int load_flat_file(struct linux_binprm *bprm,
* __start to address 4 so that is okay).
*/
if (rev > OLD_FLAT_VERSION) {
u32 __maybe_unused persistent = 0;
for (i = 0; i < relocs; i++) {
u32 addr, relval;
__be32 tmp;
/*
* Get the address of the pointer to be
* relocated (of course, the address has to be
* relocated first).
*/
if (get_user(relval, reloc + i))
if (get_user(tmp, reloc + i))
return -EFAULT;
relval = ntohl(relval);
if (flat_set_persistent(relval, &persistent))
continue;
relval = ntohl(tmp);
addr = flat_get_relocate_addr(relval);
rp = (u32 __user *)calc_reloc(addr, libinfo, id, 1);
if (rp == (u32 __user *)RELOC_FAILED) {
@ -797,8 +817,7 @@ static int load_flat_file(struct linux_binprm *bprm,
}
/* Get the pointer's value. */
ret = flat_get_addr_from_rp(rp, relval, flags,
&addr, &persistent);
ret = flat_get_addr_from_rp(rp, relval, flags, &addr);
if (unlikely(ret))
goto err;
@ -807,8 +826,13 @@ static int load_flat_file(struct linux_binprm *bprm,
* Do the relocation. PIC relocs in the data section are
* already in target order
*/
if ((flags & FLAT_FLAG_GOTPIC) == 0)
addr = ntohl(addr);
if ((flags & FLAT_FLAG_GOTPIC) == 0) {
/*
* Meh, the same value can have a different
* byte order based on a flag..
*/
addr = ntohl((__force __be32)addr);
}
addr = calc_reloc(addr, libinfo, id, 0);
if (addr == RELOC_FAILED) {
ret = -ENOEXEC;
@ -821,14 +845,15 @@ static int load_flat_file(struct linux_binprm *bprm,
goto err;
}
}
#ifdef CONFIG_BINFMT_FLAT_OLD
} else {
for (i = 0; i < relocs; i++) {
u32 relval;
__be32 relval;
if (get_user(relval, reloc + i))
return -EFAULT;
relval = ntohl(relval);
old_reloc(relval);
old_reloc(ntohl(relval));
}
#endif /* CONFIG_BINFMT_FLAT_OLD */
}
flush_icache_range(start_code, end_code);

View File

@ -1,19 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* arch/arm/include/asm/flat.h -- uClinux flat-format executables
*/
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
#ifndef _ASM_GENERIC_FLAT_H
#define _ASM_GENERIC_FLAT_H
#include <linux/uaccess.h>
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
u32 *addr, u32 *persistent)
u32 *addr)
{
#ifndef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
return copy_from_user(addr, rp, 4) ? -EFAULT : 0;
@ -31,7 +23,4 @@ static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
#endif
}
#define flat_get_relocate_addr(rel) (rel)
#define flat_set_persistent(relval, p) 0
#endif /* __ARM_FLAT_H__ */
#endif /* _ASM_GENERIC_FLAT_H */

View File

@ -10,8 +10,41 @@
#ifndef _LINUX_FLAT_H
#define _LINUX_FLAT_H
#include <uapi/linux/flat.h>
#include <asm/flat.h>
#define FLAT_VERSION 0x00000004L
/*
* To make everything easier to port and manage cross platform
* development, all fields are in network byte order.
*/
struct flat_hdr {
char magic[4];
__be32 rev; /* version (as above) */
__be32 entry; /* Offset of first executable instruction
with text segment from beginning of file */
__be32 data_start; /* Offset of data segment from beginning of
file */
__be32 data_end; /* Offset of end of data segment from beginning
of file */
__be32 bss_end; /* Offset of end of bss segment from beginning
of file */
/* (It is assumed that data_end through bss_end forms the bss segment.) */
__be32 stack_size; /* Size of stack, in bytes */
__be32 reloc_start; /* Offset of relocation records from beginning of
file */
__be32 reloc_count; /* Number of relocation records */
__be32 flags;
__be32 build_date; /* When the program/library was built */
__u32 filler[5]; /* Reservered, set to zero */
};
#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
/*
* While it would be nice to keep this header clean, users of older
@ -22,28 +55,21 @@
* with the format above, except to fix bugs with old format support.
*/
#include <asm/byteorder.h>
#define OLD_FLAT_VERSION 0x00000002L
#define OLD_FLAT_RELOC_TYPE_TEXT 0
#define OLD_FLAT_RELOC_TYPE_DATA 1
#define OLD_FLAT_RELOC_TYPE_BSS 2
typedef union {
unsigned long value;
u32 value;
struct {
# if defined(mc68000) && !defined(CONFIG_COLDFIRE)
signed long offset : 30;
unsigned long type : 2;
# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
#if defined(__LITTLE_ENDIAN_BITFIELD) || \
(defined(mc68000) && !defined(CONFIG_COLDFIRE))
s32 offset : 30;
u32 type : 2;
# elif defined(__BIG_ENDIAN_BITFIELD)
unsigned long type : 2;
signed long offset : 30;
# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
# elif defined(__LITTLE_ENDIAN_BITFIELD)
signed long offset : 30;
unsigned long type : 2;
# define OLD_FLAT_FLAG_RAM 0x1 /* load program entirely into RAM */
u32 type : 2;
s32 offset : 30;
# else
# error "Unknown bitfield order for flat files."
# endif

View File

@ -1,59 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* Copyright (C) 2002-2003 David McCullough <davidm@snapgear.com>
* Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>
* The Silver Hammer Group, Ltd.
*
* This file provides the definitions and structures needed to
* support uClinux flat-format executables.
*/
#ifndef _UAPI_LINUX_FLAT_H
#define _UAPI_LINUX_FLAT_H
#define FLAT_VERSION 0x00000004L
#ifdef CONFIG_BINFMT_SHARED_FLAT
#define MAX_SHARED_LIBS (4)
#else
#define MAX_SHARED_LIBS (1)
#endif
/*
* To make everything easier to port and manage cross platform
* development, all fields are in network byte order.
*/
struct flat_hdr {
char magic[4];
unsigned long rev; /* version (as above) */
unsigned long entry; /* Offset of first executable instruction
with text segment from beginning of file */
unsigned long data_start; /* Offset of data segment from beginning of
file */
unsigned long data_end; /* Offset of end of data segment
from beginning of file */
unsigned long bss_end; /* Offset of end of bss segment from beginning
of file */
/* (It is assumed that data_end through bss_end forms the bss segment.) */
unsigned long stack_size; /* Size of stack, in bytes */
unsigned long reloc_start; /* Offset of relocation records from
beginning of file */
unsigned long reloc_count; /* Number of relocation records */
unsigned long flags;
unsigned long build_date; /* When the program/library was built */
unsigned long filler[5]; /* Reservered, set to zero */
};
#define FLAT_FLAG_RAM 0x0001 /* load program entirely into RAM */
#define FLAT_FLAG_GOTPIC 0x0002 /* program is PIC with GOT */
#define FLAT_FLAG_GZIP 0x0004 /* all but the header is compressed */
#define FLAT_FLAG_GZDATA 0x0008 /* only data/relocs are compressed (for XIP) */
#define FLAT_FLAG_KTRACE 0x0010 /* output useful kernel trace for debugging */
#endif /* _UAPI_LINUX_FLAT_H */