Merge remote-tracking branch 'regulator/topic/axp20x' into regulator-next
This commit is contained in:
commit
38cdaddf56
|
@ -22,6 +22,11 @@ Optional properties:
|
|||
AXP152/20X: range: 750-1875, Default: 1.5 MHz
|
||||
AXP22X/80X: range: 1800-4050, Default: 3 MHz
|
||||
|
||||
- x-powers,drive-vbus-en: axp221 / axp223 only boolean, set this when the
|
||||
N_VBUSEN pin is used as an output pin to control an external
|
||||
regulator to drive the OTG VBus, rather then as an input pin
|
||||
which signals whether the board is driving OTG VBus or not.
|
||||
|
||||
- <input>-supply: a phandle to the regulator supply node. May be omitted if
|
||||
inputs are unregulated, such as using the IPSOUT output
|
||||
from the PMIC.
|
||||
|
@ -79,6 +84,7 @@ ELDO3 : LDO : eldoin-supply : shared supply
|
|||
LDO_IO0 : LDO : ips-supply : GPIO 0
|
||||
LDO_IO1 : LDO : ips-supply : GPIO 1
|
||||
RTC_LDO : LDO : ips-supply : always on
|
||||
DRIVEVBUS : Enable output : drivevbus-supply : external regulator
|
||||
|
||||
AXP809 regulators, type, and corresponding input supply names:
|
||||
|
||||
|
|
|
@ -36,6 +36,8 @@
|
|||
|
||||
#define AXP20X_FREQ_DCDC_MASK 0x0f
|
||||
|
||||
#define AXP22X_MISC_N_VBUSEN_FUNC BIT(4)
|
||||
|
||||
#define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg, \
|
||||
_vmask, _ereg, _emask, _enable_val, _disable_val) \
|
||||
[_family##_##_id] = { \
|
||||
|
@ -230,6 +232,73 @@ static const struct regulator_desc axp22x_regulators[] = {
|
|||
AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
|
||||
};
|
||||
|
||||
static const struct regulator_desc axp22x_drivevbus_regulator = {
|
||||
.name = "drivevbus",
|
||||
.supply_name = "drivevbus",
|
||||
.of_match = of_match_ptr("drivevbus"),
|
||||
.regulators_node = of_match_ptr("regulators"),
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.owner = THIS_MODULE,
|
||||
.enable_reg = AXP20X_VBUS_IPSOUT_MGMT,
|
||||
.enable_mask = BIT(2),
|
||||
.ops = &axp20x_ops_sw,
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
|
||||
REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
|
||||
};
|
||||
|
||||
static const struct regulator_linear_range axp809_dldo1_ranges[] = {
|
||||
REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
|
||||
REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
|
||||
};
|
||||
|
||||
static const struct regulator_desc axp809_regulators[] = {
|
||||
AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
|
||||
AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
|
||||
AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
|
||||
AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
|
||||
AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
|
||||
AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
|
||||
AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges,
|
||||
57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1,
|
||||
BIT(4)),
|
||||
AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
|
||||
AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
|
||||
/* secondary switchable output of DCDC1 */
|
||||
AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
|
||||
BIT(7)),
|
||||
/* LDO regulator internally chained to DCDC5 */
|
||||
AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
|
||||
AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
|
||||
AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
|
||||
AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
|
||||
AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
|
||||
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
|
||||
AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
|
||||
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
|
||||
AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp809_dldo1_ranges,
|
||||
32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
|
||||
BIT(3)),
|
||||
AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
|
||||
AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
|
||||
AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
|
||||
AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
|
||||
AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
|
||||
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
|
||||
AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
|
||||
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
|
||||
AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
|
||||
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
|
||||
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
|
||||
AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
|
||||
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
|
||||
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
|
||||
AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
|
||||
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
|
||||
};
|
||||
|
||||
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
|
||||
{
|
||||
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
|
||||
|
@ -245,6 +314,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
|
|||
break;
|
||||
case AXP221_ID:
|
||||
case AXP223_ID:
|
||||
case AXP809_ID:
|
||||
min = 1800;
|
||||
max = 4050;
|
||||
def = 3000;
|
||||
|
@ -324,6 +394,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
|
|||
|
||||
case AXP221_ID:
|
||||
case AXP223_ID:
|
||||
case AXP809_ID:
|
||||
if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
|
||||
return -EINVAL;
|
||||
|
||||
|
@ -352,8 +423,9 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
|
|||
};
|
||||
int ret, i, nregulators;
|
||||
u32 workmode;
|
||||
const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
|
||||
const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
|
||||
const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
|
||||
const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
|
||||
bool drivevbus = false;
|
||||
|
||||
switch (axp20x->variant) {
|
||||
case AXP202_ID:
|
||||
|
@ -365,6 +437,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
|
|||
case AXP223_ID:
|
||||
regulators = axp22x_regulators;
|
||||
nregulators = AXP22X_REG_ID_MAX;
|
||||
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
|
||||
"x-powers,drive-vbus-en");
|
||||
break;
|
||||
case AXP809_ID:
|
||||
regulators = axp809_regulators;
|
||||
nregulators = AXP809_REG_ID_MAX;
|
||||
break;
|
||||
default:
|
||||
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
|
||||
|
@ -388,22 +466,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
|
|||
* part of this loop to see where we save the DT defined
|
||||
* name.
|
||||
*/
|
||||
if (regulators == axp22x_regulators) {
|
||||
if (i == AXP22X_DC1SW) {
|
||||
new_desc = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*desc),
|
||||
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
|
||||
(regulators == axp809_regulators && i == AXP809_DC1SW)) {
|
||||
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
|
||||
GFP_KERNEL);
|
||||
*new_desc = regulators[i];
|
||||
new_desc->supply_name = axp22x_dc1_name;
|
||||
desc = new_desc;
|
||||
} else if (i == AXP22X_DC5LDO) {
|
||||
new_desc = devm_kzalloc(&pdev->dev,
|
||||
sizeof(*desc),
|
||||
GFP_KERNEL);
|
||||
*new_desc = regulators[i];
|
||||
new_desc->supply_name = axp22x_dc5_name;
|
||||
new_desc->supply_name = dcdc1_name;
|
||||
desc = new_desc;
|
||||
}
|
||||
|
||||
if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
|
||||
(regulators == axp809_regulators && i == AXP809_DC5LDO)) {
|
||||
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
|
||||
GFP_KERNEL);
|
||||
*new_desc = regulators[i];
|
||||
new_desc->supply_name = dcdc5_name;
|
||||
desc = new_desc;
|
||||
}
|
||||
|
||||
rdev = devm_regulator_register(&pdev->dev, desc, &config);
|
||||
|
@ -426,16 +504,29 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
|
|||
/*
|
||||
* Save AXP22X DCDC1 / DCDC5 regulator names for later.
|
||||
*/
|
||||
if (regulators == axp22x_regulators) {
|
||||
/* Can we use rdev->constraints->name instead? */
|
||||
if (i == AXP22X_DCDC1)
|
||||
if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
|
||||
(regulators == axp809_regulators && i == AXP809_DCDC1))
|
||||
of_property_read_string(rdev->dev.of_node,
|
||||
"regulator-name",
|
||||
&axp22x_dc1_name);
|
||||
else if (i == AXP22X_DCDC5)
|
||||
&dcdc1_name);
|
||||
|
||||
if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
|
||||
(regulators == axp809_regulators && i == AXP809_DCDC5))
|
||||
of_property_read_string(rdev->dev.of_node,
|
||||
"regulator-name",
|
||||
&axp22x_dc5_name);
|
||||
&dcdc5_name);
|
||||
}
|
||||
|
||||
if (drivevbus) {
|
||||
/* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
|
||||
regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
|
||||
AXP22X_MISC_N_VBUSEN_FUNC, 0);
|
||||
rdev = devm_regulator_register(&pdev->dev,
|
||||
&axp22x_drivevbus_regulator,
|
||||
&config);
|
||||
if (IS_ERR(rdev)) {
|
||||
dev_err(&pdev->dev, "Failed to register drivevbus\n");
|
||||
return PTR_ERR(rdev);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue